summaryrefslogtreecommitdiff
path: root/drivers/scsi/storvsc_drv.c
AgeCommit message (Collapse)Author
2018-05-30scsi: storvsc: Increase cmd_per_lun for higher speed devicesMichael Kelley (EOSG)
[ Upstream commit cabe92a55e3a12005a4ac4d3954c9a174b0efe2a ] Increase cmd_per_lun to allow more I/Os in progress per device, particularly for NVMe's. The Hyper-V host side can handle the higher count with no issues. Signed-off-by: Michael Kelley <mikelley@microsoft.com> Reviewed-by: K. Y. Srinivasan <kys@microsoft.com> Acked-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-03scsi: storvsc: Fix scsi_cmd error assignments in storvsc_handle_errorCathy Avery
[ Upstream commit d1b8b2391c24751e44f618fcf86fb55d9a9247fd ] When an I/O is returned with an srb_status of SRB_STATUS_INVALID_LUN which has zero good_bytes it must be assigned an error. Otherwise the I/O will be continuously requeued and will cause a deadlock in the case where disks are being hot added and removed. sd_probe_async will wait forever for its I/O to complete while holding scsi_sd_probe_domain. Also returning the default error of DID_TARGET_FAILURE causes multipath to not retry the I/O resulting in applications receiving I/O errors before a failover can occur. Signed-off-by: Cathy Avery <cavery@redhat.com> Signed-off-by: Long Li <longli@microsoft.com> Reviewed-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-16scsi: storvsc: Workaround for virtual DVD SCSI versionStephen Hemminger
commit f1c635b439a5c01776fe3a25b1e2dc546ea82e6f upstream. Hyper-V host emulation of SCSI for virtual DVD device reports SCSI version 0 (UNKNOWN) but is still capable of supporting REPORTLUN. Without this patch, a GEN2 Linux guest on Hyper-V will not boot 4.11 successfully with virtual DVD ROM device. What happens is that the SCSI scan process falls back to doing sequential probing by INQUIRY. But the storvsc driver has a previous workaround that masks/blocks all errors reports from INQUIRY (or MODE_SENSE) commands. This workaround causes the scan to then populate a full set of bogus LUN's on the target and then sends kernel spinning off into a death spiral doing block reads on the non-existent LUNs. By setting the correct blacklist flags, the target with the DVD device is scanned with REPORTLUN and that works correctly. Patch needs to go in current 4.11, it is safe but not necessary in older kernels. Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Reviewed-by: K. Y. Srinivasan <kys@microsoft.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-09-27scsi: storvsc: fix memory leak on ring buffer busyLong Li
commit 0208eeaa650c5c866a3242201678a19e6dc4a14e upstream. When storvsc is sending I/O to Hyper-v, it may allocate a bigger buffer descriptor for large data payload that can't fit into a pre-allocated buffer descriptor. This bigger buffer is freed on return path. If I/O request to Hyper-v fails due to ring buffer busy, the storvsc allocated buffer descriptor should also be freed. [mkp: applied by hand] Fixes: be0cf6ca301c ("scsi: storvsc: Set the tablesize based on the information given by the host") Signed-off-by: Long Li <longli@microsoft.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-12scsi: storvsc: properly set residual data length on errorsLong Li
commit 40630f462824ee24bc00d692865c86c3828094e0 upstream. On I/O errors, the Windows driver doesn't set data_transfer_length on error conditions other than SRB_STATUS_DATA_OVERRUN. In these cases we need to set data_transfer_length to 0, indicating there is no data transferred. On SRB_STATUS_DATA_OVERRUN, data_transfer_length is set by the Windows driver to the actual data transferred. Reported-by: Shiva Krishna <Shiva.Krishna@nimblestorage.com> Signed-off-by: Long Li <longli@microsoft.com> Reviewed-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-12scsi: storvsc: properly handle SRB_ERROR when sense message is presentLong Li
commit bba5dc332ec2d3a685cb4dae668c793f6a3713a3 upstream. When sense message is present on error, we should pass along to the upper layer to decide how to deal with the error. This patch fixes connectivity issues with Fiber Channel devices. Signed-off-by: Long Li <longli@microsoft.com> Reviewed-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-12scsi: storvsc: use tagged SRB requests if supported by the deviceLong Li
commit 3cd6d3d9b1abab8dcdf0800224ce26daac24eea2 upstream. Properly set SRB flags when hosting device supports tagged queuing. This patch improves the performance on Fiber Channel disks. Signed-off-by: Long Li <longli@microsoft.com> Reviewed-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-12scsi: storvsc: fix SRB_STATUS_ABORTED handlingVitaly Kuznetsov
commit ff06c5ffbcb4ffa542fb80c897be977956fafecc upstream. Commit 3209f9d780d1 ("scsi: storvsc: Fix a bug in the handling of SRB status flags") filtered SRB_STATUS_AUTOSENSE_VALID out effectively making the (SRB_STATUS_ABORTED | SRB_STATUS_AUTOSENSE_VALID) case a dead code. The logic from this branch (e.g. storvsc_device_scan() call) is still required, fix the check. Fixes: 3209f9d780d1 ("scsi: storvsc: Fix a bug in the handling of SRB status flags") Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Acked-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-11-09scsi: storvsc: Fix a bug in the handling of SRB status flagsK. Y. Srinivasan
SRB status can have additional information. Mask these out before processing SRB status. This patch was sent as part of a collection of patches more than a year ago. While the rest of the patches in the set were comitted, this patch was not. I woulod like to thank Olaf for noticing that this patch was not committed upstream. Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Reviewed-by: Long Li <longli@microsoft.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-11-09storvsc: get rid of bounce bufferVitaly Kuznetsov
Storvsc driver needs to ensure there are no 'holes' in the presented sg list (all segments in the middle of the list need to be of PAGE_SIZE). When a hole is detected storvsc driver creates a 'bounce sgl' without holes and copies data over with copy_{to,from}_bounce_buffer() functions. Setting virt_boundary_mask to PAGE_SIZE - 1 guarantees we'll never see such holes so we can significantly simplify the driver. This is also supposed to bring us some performance improvement for certain workloads as we eliminate copying. Reported-by: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Reviewed-by: K. Y. Srinivasan <kys@microsoft.com> Tested-by: Alex Ng <alexng@microsoft.com> Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-11-09storvsc: Don't set the SRB_FLAGS_QUEUE_ACTION_ENABLE flagK. Y. Srinivasan
Don't set the SRB_FLAGS_QUEUE_ACTION_ENABLE flag since we are not specifying tags. Without this, the qlogic driver doesn't work properly with storvsc. Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Cc: stable@vger.kernel.org Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-08-26storvsc: Set the error code correctly in failure conditionsK. Y. Srinivasan
In the function storvsc_channel_init(), error code was not getting set correctly in some of the failure cases. Fix this issue. Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-08-26storvsc: Allow write_same when host is windows 10Keith Mange
Allow WRITE_SAME for Windows10 and above hosts. Tested-by: Alex Ng <alexng@microsoft.com> Signed-off-by: Keith Mange <keith.mange@microsoft.com> Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-08-26storvsc: use storage protocol version to determine storage capabilitiesKeith Mange
Use storage protocol version instead of vmbus protocol version when determining storage capabilities. Tested-by: Alex Ng <alexng@microsoft.com> Signed-off-by: Keith Mange <keith.mange@microsoft.com> Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-08-26storvsc: use correct defaults for values determined by protocol negotiationKeith Mange
Use correct defaults for values determined by protocol negotiation, instead of resetting them with every scsi controller. Tested-by: Alex Ng <alexng@microsoft.com> Signed-off-by: Keith Mange <keith.mange@microsoft.com> Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-08-26storvsc: Untangle the storage protocol negotiation from the vmbus protocol ↵Keith Mange
negotiation. Currently we are making decisions based on vmbus protocol versions that have been negotiated; use storage potocol versions instead. [jejb: fold ARRAY_SIZE conversion suggested by Johannes Thumshirn <jthumshirn@suse.de> make vmstor_protocol static] Tested-by: Alex Ng <alexng@microsoft.com> Signed-off-by: Keith Mange <keith.mange@microsoft.com> Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-08-26storvsc: Use a single value to track protocol versionsKeith Mange
Use a single value to track protocol versions to simplify comparisons and to be consistent with vmbus version tracking. Tested-by: Alex Ng <alexng@microsoft.com> Signed-off-by: Keith Mange <keith.mange@microsoft.com> Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-08-26storvsc: Rather than look for sets of specific protocol versions, make ↵Keith Mange
decisions based on ranges. Rather than look for sets of specific protocol versions, make decisions based on ranges. This will be safer and require fewer changes going forward as we add more storage protocol versions. Tested-by: Alex Ng <alexng@microsoft.com> Signed-off-by: Keith Mange <keith.mange@microsoft.com> Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-08-12storvsc: use shost_for_each_device() instead of open codingVitaly Kuznetsov
Comment in struct Scsi_Host says that drivers are not supposed to access __devices directly. storvsc_host_scan() doesn't happen in irq context so we can just use shost_for_each_device(). Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Reviewed-by: Long Li <longli@microsoft.com> Acked-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-08-12storvsc: be more picky about scmnd->sc_data_directionVitaly Kuznetsov
Under the 'default' case in scmnd->sc_data_direction we have 3 options: - DMA_NONE which we handle correctly. - DMA_BIDIRECTIONAL which is never supposed to be set by SCSI stack. - Garbage value. Do WARN() and return -EINVAL in the last two cases. virtio_scsi does BUG_ON() here but it looks like an overkill. Reported-by: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Acked-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-05-11storvsc: Set the SRB flags correctly when no data transfer is neededK. Y. Srinivasan
Set the SRB flags correctly when there is no data transfer. Without this change some IHV drivers will fail valid commands such as TEST_UNIT_READY. Cc: <stable@vger.kernel.org> Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Reviewed-by: Long Li <longli@microsoft.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-04-09scsi: storvsc: Set the tablesize based on the information given by the hostK. Y. Srinivasan
Set the tablesize based on the information given by the host. Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Reviewed-by: Long Li <longli@microsoft.com> Tested-by: Long Li <longli@microsoft.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-04-09scsi: storvsc: Don't assume that the scatterlist is not chainedK. Y. Srinivasan
The current code assumes that the scatterlists presented are not chained. Fix the code to not make this assumption. Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Reviewed-by: Long Li <longli@microsoft.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-04-09scsi: storvsc: Fix a bug in copy_from_bounce_buffer()K. Y. Srinivasan
We may exit this function without properly freeing up the maapings we may have acquired. Fix the bug. Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Reviewed-by: Long Li <longli@microsoft.com> Cc: <stable@vger.kernel.org> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-04-09scsi: storvsc: Retrieve information about the capability of the targetK. Y. Srinivasan
The storage protocol informs the guest of the I/O capabilities of the storage stack. Retrieve this information and use it in the guest. Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Reviewed-by: Long Li <longli@microsoft.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-04-09scsi: storvsc: Always send on the selected outgoing channelK. Y. Srinivasan
The current code always sent packets without data on the primary channel. Properly distribute sending of packets with no data amongst all available channels. I would like to thank Long Li for noticing this problem. Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Reviewed-by: Long Li <longli@microsoft.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-04-09scsi: storvsc: Size the queue depth based on the ringbuffer sizeK. Y. Srinivasan
Size the queue depth based on the ringbuffer size. Also accommodate for the fact that we could have multiple channels (ringbuffers) per adaptor. Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Reviewed-by: Long Li <longli@microsoft.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-04-09scsi: storvsc: Increase the ring buffer sizeK. Y. Srinivasan
Increase the default ring buffer size as this can significantly improve performance especially on high latency storage back-ends. Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Reviewed-by: Long Li <longli@microsoft.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-01-09storvsc: force SPC-3 compliance on win8 and win8 r2 hostsK. Y. Srinivasan
On win8 and win8 r2 hosts force SPC-3 compliance for MSFT virtual disks. Ubuntu has been carrying a similar patch outside the tree for a while now. Starting with win10, the host will support SPC-3 compliance. Based on all the testing that has been done on win8 and win8 r2 hosts, we are comfortable claiming SPC-3 compliance on these hosts as well. This will enable TRIM support on these hosts. Suggested by: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Reviewed-by: Long Li <longli@microsoft.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2015-01-09storvsc: fix a bug in storvsc limitsK. Y. Srinivasan
Commit 4cd83ecdac20d30725b4f96e5d7814a1e290bc7e changed the limits to reflect the values on the host. It turns out that WS2008R2 cannot correctly handle these new limits. Fix this bug by setting the limits based on the host. Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Reviewed-by: Long Li <longli@microsoft.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2015-01-09storvsc: force discovery of LUNs that may have been removed.K. Y. Srinivasan
The host asks the guest to scan when a LUN is removed or added. The only way a guest can identify the removed LUN is when an I/O is attempted on a removed LUN - the SRB status code indicates that the LUN is invalid. We currently handle this SRB status and remove the device. Rather than waiting for an I/O to remove the device, force the discovery of LUNs that may have been removed prior to discovering LUNs that may have been added. Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Reviewed-by: Long Li <longli@microsoft.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2015-01-09storvsc: in responce to a scan event, scan the hostK. Y. Srinivasan
The virtual HBA that storvsc implements can support multiple channels and targets. So, scan the host when the host notifies that a scan is needed. Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Reviewed-by: Long Li <longli@microsoft.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2015-01-09storvsc: use cmd_size to allocate per-command dataChristoph Hellwig
STORVSC uses its own momory pool to manage device request data. However, the SCSI layer already has a mechanisim for allocating additional memory for each command issued to device driver. This patch removes the memory pool in STORVSC and makes it use SCSI layer to allocate memory for device request data. Reviewed-by: Long Li <longli@microsoft.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-12-15storvsc: ring buffer failures may result in I/O freezeLong Li
When ring buffer returns an error indicating retry, storvsc may not return a proper error code to SCSI when bounce buffer is not used. This has introduced I/O freeze on RAID running atop storvsc devices. This patch fixes it by always returning a proper error code. Signed-off-by: Long Li <longli@microsoft.com> Reviewed-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Christoph Hellwig <hch@lst.de> cc: stable@vger.kernel.org
2014-11-24scsi: drop reason argument from ->change_queue_depthChristoph Hellwig
Drop the now unused reason argument from the ->change_queue_depth method. Also add a return value to scsi_adjust_queue_depth, and rename it to scsi_change_queue_depth now that it can be used as the default ->change_queue_depth implementation. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Reviewed-by: Hannes Reinecke <hare@suse.de>
2014-11-12scsi: don't set tagging state from scsi_adjust_queue_depthChristoph Hellwig
Remove the tagged argument from scsi_adjust_queue_depth, and just let it handle the queue depth. For most drivers those two are fairly separate, given that most modern drivers don't care about the SCSI "tagged" status of a command at all, and many old drivers allow queuing of multiple untagged commands in the driver. Instead we start out with the ->simple_tags flag set before calling ->slave_configure, which is how all drivers actually looking at ->simple_tags except for one worke anyway. The one other case looks broken, but I've kept the behavior as-is for now. Except for that we only change ->simple_tags from the ->change_queue_type, and when rejecting a tag message in a single driver, so keeping this churn out of scsi_adjust_queue_depth is a clear win. Now that the usage of scsi_adjust_queue_depth is more obvious we can also remove all the trivial instances in ->slave_alloc or ->slave_configure that just set it to the cmd_per_lun default. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
2014-11-12scsi: use sdev as argument for sense code printingHannes Reinecke
We should be using the standard dev_printk() variants for sense code printing. [hch: remove __scsi_print_sense call in xen-scsiback, Acked by Juergen] [hch: folded bracing fix from Dan Carpenter] Signed-off-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-22storvsc: get rid of overly verbose warning messagesK. Y. Srinivasan
Get rid of the warning messages since they will clutter up various system logs and are of questionable value to the end user. For debugging purposes, this information can be gotten by setting the scsi log level appropriately. Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Reviewed-by: Olaf Hering <olaf@aepfle.de> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-25Drivers: add blist flagsK. Y. Srinivasan
Add blist flags to permit the reading of the VPD pages even when the target may claim SPC-2 compliance. MSFT targets currently claim SPC-2 compliance while they implement post SPC-2 features. With this patch we can correctly handle WRITE_SAME_16 issues. Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-25drivers: scsi: storvsc: Correctly handle TEST_UNIT_READY failureK. Y. Srinivasan
On some Windows hosts on FC SANs, TEST_UNIT_READY can return SRB_STATUS_ERROR. Correctly handle this. Note that there is sufficient sense information to support scsi error handling even in this case. Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Cc: <stable@vger.kernel.org> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-25drivers: scsi: storvsc: Set srb_flags in all casesK. Y. Srinivasan
Correctly set SRB flags for all valid I/O directions. Some IHV drivers on the Windows host require this. The host validates the command and SRB flags prior to passing the command down to native driver stack. Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Cc: <stable@vger.kernel.org> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-25Drivers: scsi: storvsc: Implement a eh_timed_out handlerK. Y. Srinivasan
On Azure, we have seen instances of unbounded I/O latencies. To deal with this issue, implement handler that can reset the timeout. Note that the host gaurantees that it will respond to each command that has been issued. Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Cc: <stable@vger.kernel.org> [hch: added a better comment explaining the issue] Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-25Drivers: scsi: storvsc: Fix a bug in handling VMBUS protocol versionK. Y. Srinivasan
Based on the negotiated VMBUS protocol version, we adjust the size of the storage protocol messages. The two sizes we currently handle are pre-win8 and post-win8. In WS2012 R2, we are negotiating higher VMBUS protocol version than the win8 version. Make adjustments to correctly handle this. Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Cc: <stable@vger.kernel.org> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-25Drivers: scsi: storvsc: Filter commands based on the storage protocol versionK. Y. Srinivasan
Going forward it is possible that some of the commands that are not currently implemented will be implemented on future Windows hosts. Even if they are not implemented, we are told the host will corrrectly handle unsupported commands (by returning appropriate return code and sense information). Make command filtering depend on the host version. Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Cc: <stable@vger.kernel.org> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-25Drivers: scsi: storvsc: Set cmd_per_lun to reflect value supported by the HostK. Y. Srinivasan
Set cmd_per_lun to reflect value supported by the Host. Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Cc: <stable@vger.kernel.org> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-25Drivers: scsi: storvsc: Change the limits to reflect the values on the hostK. Y. Srinivasan
Hyper-V hosts can support multiple targets and multiple channels and larger number of LUNs per target. Update the code to reflect this. With this patch we can correctly enumerate all the paths in a multi-path storage environment. Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Cc: <stable@vger.kernel.org> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-03-12[SCSI] storvsc: NULL pointer dereference fixAles Novak
If the initialization of storvsc fails, the storvsc_device_destroy() causes NULL pointer dereference. storvsc_bus_scan() scsi_scan_target() __scsi_scan_target() scsi_probe_and_add_lun(hostdata=NULL) scsi_alloc_sdev(hostdata=NULL) sdev->hostdata = hostdata now the host allocation fails __scsi_remove_device(sdev) calls sdev->host->hostt->slave_destroy() == storvsc_device_destroy(sdev) access of sdev->hostdata->request_mempool Signed-off-by: Ales Novak <alnovak@suse.cz> Signed-off-by: Thomas Abraham <tabraham@suse.com> Reviewed-by: Jiri Kosina <jkosina@suse.cz> Acked-by: K. Y. Srinivasan <kys@microsoft.com> Cc: stable@vger.kernel.org Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-11-29[SCSI] Disable WRITE SAME for RAID and virtual host adapter driversMartin K. Petersen
Some host adapters do not pass commands through to the target disk directly. Instead they provide an emulated target which may or may not accurately report its capabilities. In some cases the physical device characteristics are reported even when the host adapter is processing commands on the device's behalf. This can lead to adapter firmware hangs or excessive I/O errors. This patch disables WRITE SAME for devices connected to host adapters that provide an emulated target. Driver writers can disable WRITE SAME by setting the no_write_same flag in the host adapter template. [jejb: fix up rejections due to eh_deadline patch] Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Cc: stable@kernel.org Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-08-02Drivers: hv: remove HV_DRV_VERSIONOlaf Hering
Remove HV_DRV_VERSION, it has no meaning for upstream drivers. Initially it was supposed to show the "Linux Integration Services" version, now it is not in sync anymore with the out-of-tree drivers available from the MSFT website. The only place where a version string is still required is the KVP command "IntegrationServicesVersion" which is handled by tools/hv/hv_kvp_daemon.c. To satisfy such KVP request from the host pass the current string to the daemon during KVP userland registration. Signed-off-by: Olaf Hering <olaf@aepfle.de> Acked-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-08[SCSI] storvsc: Increase the value of STORVSC_MAX_IO_REQUESTSK. Y. Srinivasan
Increase the value of STORVSC_MAX_IO_REQUESTS to 200 requests. The current ringbuffer size can support this higher value. Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
generated by cgit v1.2.3 (git 2.0.4) at 2024-06-19 15:37:17 +0000