summaryrefslogtreecommitdiff
path: root/drivers/spi/spidev.c
AgeCommit message (Collapse)Author
2016-07-04spi: spidev: Add ACPI probing supportMika Westerberg
Some IoT and maker software stacks are using spidev to perform raw access to the SPI bus instead of relying existing drivers provided by the kernel. They then implement their own "drivers" in userspace on top of the spidev raw interface. This is far from being an ideal solution but we do not want to prevent using mainline Linux in these devices. Now, it turns out that Windows has similar SPI devices than spidev which allow raw access on the SPI bus to userspace programs as described in the link below: https://msdn.microsoft.com/windows/hardware/drivers/spb/spi-tests-in-mitt These SPI test devices are also meant to be used during development and testing. In order to allow usage of spidev for development and testing in Linux, add those same ACPI IDs to the spidev driver (which is Linux counterpart of the Windows SPI test devices), but complain loudly so that users know it is not good idea to use it in production systems. Instead they should be using proper drivers for peripherals connected to the SPI bus. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-01-11Merge remote-tracking branches 'spi/topic/overlay', 'spi/topic/pxa2xx', ↵Mark Brown
'spi/topic/s3c64xx', 'spi/topic/sh-msiof' and 'spi/topic/spidev' into spi-next
2015-12-16spi: spidev: Hold spi_lock over all defererences of spi in release()Mark Brown
We use the spi_lock spinlock to protect against races between the device being removed and file operations on the spidev. This means that in the removal path all references to the device need to be done under lock as in removal we dropping references to the device. Reported-by: Vegard Nossum <vegard.nossum@oracle.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-11-30spi: spidev: Use "%u" to format __u32Geert Uytterhoeven
On 64-bit with CONFIG_SPI_DEBUG=y and #define VERBOSE: drivers/spi/spidev.c:287:3: warning: format '%zd' expects argument of type 'signed size_t', but argument 4 has type '__u32' [-Wformat=] Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-11-04Merge remote-tracking branches 'spi/topic/omap-100k', ↵Mark Brown
'spi/topic/omap-uwire', 'spi/topic/owner', 'spi/topic/pxa' and 'spi/topic/pxa2xx' into spi-next
2015-10-28spi: Drop owner assignment from spi_driversAndrew F. Davis
An spi_driver does not need to set an owner, it will be populated by the driver core. Signed-off-by: Andrew F. Davis <afd@ti.com> Acked-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-09-22Merge remote-tracking branches 'spi/fix/spidev' and 'spi/fix/xtfpga' into ↵Mark Brown
spi-linus
2015-09-11spi: spidev: fix possible NULL dereferenceSudip Mukherjee
During the last close we are freeing spidev if spidev->spi is NULL, but just before checking if spidev->spi is NULL we are dereferencing it. Lets add a check there to avoid the NULL dereference. Fixes: 9169051617df ("spi: spidev: Don't mangle max_speed_hz in underlying spi device") Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org> Reviewed-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Tested-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-08-31Merge remote-tracking branches 'spi/topic/s3c64xx', 'spi/topic/sg', ↵Mark Brown
'spi/topic/sh-msiof', 'spi/topic/spidev' and 'spi/topic/stats' into spi-next
2015-08-04spi: spidev: fix inconsistent indentingColin Ian King
Fix inconsistent indenting in spidev_open, no functional change. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-07-16spi: spidev: Fix typoFabio Estevam
Fix the typo in "compatible". Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-07-07spi: spidev: add compatible value for LTC2488Jiri Prchal
Since spidev is no more allowed to use in DT and is really loudly warned about it I'd like to add this compatible value. (Geert Uytterhoeven wrote: "Add the compatible value for your device to the spidev_dt_ids[] array in drivers/spi/spidev.c.") Signed-off-by: Mark Brown <broonie@kernel.org>
2015-06-18Merge remote-tracking branches 'spi/topic/sirf', 'spi/topic/spidev' and ↵Mark Brown
'spi/topic/zynq' into spi-next
2015-05-11spi: spidev: Remove unneeded variableFabio Estevam
Remove unneeded variable used to store return value. The semantic patch that makes this change is available in scripts/coccinelle/misc/returnvar.cocci. More information about semantic patching is available at http://coccinelle.lip6.fr/ Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-04-23spi: spidev: use spi_sync instead of spi_asyncMartin Sperl
This has the benefit that the "optimization" of the framework in regards to spi_sync will also benefit spidev users directly and allow running spi transfers without a necessary context-switch to message-pump. Signed-off-by: Martin Sperl <kernel@martin.sperl.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-27spi: spidev: Warn loudly if instantiated from DT as "spidev"Mark Brown
Since spidev is a detail of how Linux controls a device rather than a description of the hardware in the system we should never have a node described as "spidev" in DT, any SPI device could be a spidev so this is just not a useful description. In order to help prevent users from writing such device trees generate a warning if spidev is instantiated as a DT node without an ID in the match table. Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-23spi: spidev: fix possible arithmetic overflow for multi-transfer messageIan Abbott
`spidev_message()` sums the lengths of the individual SPI transfers to determine the overall SPI message length. It restricts the total length, returning an error if too long, but it does not check for arithmetic overflow. For example, if the SPI message consisted of two transfers and the first has a length of 10 and the second has a length of (__u32)(-1), the total length would be seen as 9, even though the second transfer is actually very long. If the second transfer specifies a null `rx_buf` and a non-null `tx_buf`, the `copy_from_user()` could overrun the spidev's pre-allocated tx buffer before it reaches an invalid user memory address. Fix it by checking that neither the total nor the individual transfer lengths exceed the maximum allowed value. Thanks to Dan Carpenter for reporting the potential integer overflow. Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-02-24spi: spidev: only use up TX/RX bounce buffer space when neededIan Abbott
This patch changes the way space is reserved in spidev's pre-allocated TX and RX bounce buffers to avoid wasting space in the buffers for an SPI message consisting of multiple, half-duplex transfers in different directions. Background: spidev data structures have separate, pre-allocated TX and RX bounce buffers (`spidev->tx_buffer` and `spidev->rx_buffer`) of fixed size (`bufsiz`). The `SPI_IOC_MESSAGE(N)` ioctl processing uses a kernel copy of the N `struct spi_ioc_transfer` elements copied from the userspace ioctl arg pointer. In these elements: `.len` is the length of transfer in bytes; `.rx_buf` is either a userspace pointer to a buffer to copy the RX data to or is set to 0 to discard the data; and `.tx_buf` is either a userspace pointer to TX data supplied by the user or is set to 0 to transmit zeros for this transfer. `spidev_message()` uses the array of N `struct spi_ioc_transfer` elements to construct a kernel SPI message consisting of a `struct spi_message` containing a linked list (allocated as an array) of N `struct spi_transfer` elements. This involves iterating through the `struct spi_ioc_transfer` and `struct spi_transfer` elements (variables `u_tmp` and `k_tmp` respectively). Before the first iteration, variables `tx_buf` and `rx_buf` point to the start of the TX and RX bounce buffers `spidev->tx_buffer` and `spidev->rx_buffer` and variable `total` is set to 0. These variables keep track of the next available space in the bounce buffers and the total length of the SPI message. Each iteration checks that there is enough room left in the buffers for the transfer. If `u_tmp->rx_buf` is non-zero, `k_tmp->rx_buf` is set to `rx_buf`, otherwise it remains set to NULL. If `u_tmp->tx_buf` is non-zero, `k_tmp->tx_buf` is set to `tx_buf` and the userspace TX data copied there, otherwise it remains set to NULL. The variables `total`, `rx_buf` and `tx_buf` are advanced by the length of the transfer. The "problem": While iterating through the transfers, the local bounce buffer "free space" pointer variables `tx_buf` and `rx_buf` are always advanced by the length of the transfer. If `u_tmp->rx_buf` is 0 (so `k_tmp->rx_buf` is NULL), then `rx_buf` is advanced unnecessarily and that part of `spidev->rx_buffer` is wasted. Similarly, if `u_tmp->tx_buf` is 0 (so `k_tmp->tx_buf` is NULL), part of `spidev->tx_buffer` is wasted. What this patch does: To avoid wasting space unnecessarily in the RX bounce buffer, only advance `rx_buf` by the transfer length if `u_tmp->rx_buf` is non-zero. Similarly, to avoid wasting space unnecessarily in the TX bounce buffer, only advance `tx_buf` if `u_tmp->tx_buf is non-zero. To avoid pointer subtraction, use new variables `rx_total` and `tx_total` to keep track of the amount of space allocated in each of the bounce buffers. If these exceed the available space, a `-EMSGSIZE` error will be returned. Limit the total length of the transfers (tracked by variable `total`) to `INT_MAX` instead of `bufsiz`, returning an `-EMSGSIZE` error if exceeded. The total length is returned by `spidev_message()` on success and we want that to be non-negative. The message size limits for the `SPI_IOC_MESSAGE(N)` ioctl are now as follows: (a) total length of transfers is <= INTMAX; (b) total length of transfers with non-NULL rx_buf is <= bufsiz; (c) total length of transfers with non-NULL tx_buf is <= bufsiz. Some transfers may have NULL rx_buf and NULL tx_buf. If the transfer is completed successfully by the SPI core, `spidev_message()` iterates through the transfers to copy any RX data from the bounce buffer back to userspace on those transfers where `u_tmp->rx_buf` is non-zero. The variable `rx_buf` is again used to keep track of the corresponding positions in the bounce buffer. Now it is only advanced for those transfers that use the RX bounce buffer. Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-02-08Merge remote-tracking branches 'spi/topic/sirf', 'spi/topic/spidev', ↵Mark Brown
'spi/topic/st-ssc' and 'spi/topic/ti-qspi' into spi-next
2015-02-02spi: spidev: Convert buf pointers for 32-bit compat SPI_IOC_MESSAGE(n)Ian Abbott
The SPI_IOC_MESSAGE(n) ioctl commands' argument points to an array of n struct spi_ioc_transfer elements. The spidev's compat_ioctl handler just converts this pointer and passes it on to the unlocked_ioctl handler to process it. The tx_buf and rx_buf members of struct spi_ioc_transfer are of type __u64 and hold pointer values. A 32-bit userspace application running in a 64-bit kernel might not have widened the 32-bit pointers correctly for the kernel. The application might have sign-extended the pointer to when the kernel expects it to be zero-extended, or vice versa, leading to an -EFAULT being returned by spidev_message() if the widened pointer is invalid. Handle the SPI_IOC_MESSAGE(n) ioctl commands specially in the compat_ioctl handler, calling new function spidev_compat_ioctl_message() to handle them. This processes them in the same way as the unlocked_ioctl handler except that it uses compat_ptr() to convert the tx_buf and rx_buf members of each struct spi_ioc_transfer element. To save code, factor out part of the unlocked_ioctl handler into a new function spidev_get_ioc_message(). This checks the ioctl command code is a valid SPI_IOC_MESSAGE(n), determines n and copies the array of n struct spi_ioc_transfer elements from userspace into dynamically allocated memory, returning either a pointer to the memory, an ERR_PTR(-err) value, or NULL (for SPI_IOC_MESSAGE(0)). Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-12-22spi: Remove FSF mailing addressesJarkko Nikula
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-11spi: spidev: Don't mangle max_speed_hz in underlying spi deviceMark Brown
Currently spidev allows callers to set the default speed by overriding the max_speed_hz in the underlying device. This achieves the immediate goal but is not what devices expect and can easily lead to userspace trying to set unsupported speeds and succeeding, apart from anything else drivers can't set a limit on the speed using max_speed_hz as they'd expect and any other devices on the bus will be affected. Instead store the default speed in the spidev struct and fill this in on each transfer. Signed-off-by: Mark Brown <broonie@kernel.org>
2014-10-13spi: spidev: Use separate TX and RX bounce buffersRay Jui
By using separate TX and RX bounce buffers, we avoid potential cache flush and invalidation sequence issue that may be encountered when a single bounce buffer is shared between TX and RX Signed-off-by: Ray Jui <rjui@broadcom.com> Reviewed-by: JD (Jiandong) Zheng <jdzheng@broadcom.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-02-27spi: spidev: Add support for Dual/Quad SPI TransfersGeert Uytterhoeven
Add support for Dual/Quad SPI Transfers to the spidev API. As this uses SPI mode bits that don't fit in a single byte, two new ioctls (SPI_IOC_RD_MODE32 and SPI_IOC_WR_MODE32) are introduced. Signed-off-by: Geert Uytterhoeven <geert+renesas@linux-m68k.org> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-27spi: spidev: Restore all SPI mode flags on ioctl failureGeert Uytterhoeven
In commit f477b7fb13df2b843997559ff34e87d054ba6538 ("spi: DUAL and QUAD support"), spi_device.mode was enlarged from 8 to 16 bits. However, the spidev code still only saved 8 bits of data. If a spidev SPI_IOC_WR_MODE or SPI_IOC_WR_LSB_FIRST request failed, only the lower 8 bits of the SPI mode were restored, inadvertently clearing the upper 8 bits, possibly disabling Quad or Dual SPI transfers for the device. Save up to 32 bits to fix this. For SPI_IOC_WR_MODE this is probably not so important, as it doesn't allow setting Quad or Dual mode anyway, but SPI_IOC_WR_LSB_FIRST is used to just set or clear a single bit. Signed-off-by: Geert Uytterhoeven <geert+renesas@linux-m68k.org> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-10-15spi: spidev: Fix checkpatch issueJingoo Han
Fix the following checkpatch warnings. WARNING: Use #include <linux/uaccess.h> instead of <asm/uaccess.h> WARNING: braces {} are not necessary for any arm of this statement Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-09-17spi: spidev: remove unnecessary spi_set_drvdata()Jingoo Han
The driver core clears the driver data to NULL after device_release or on probe failure. Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-15PTR_RET is now PTR_ERR_OR_ZERO(): Replace most.Rusty Russell
Sweep of the simple cases. Cc: netdev@vger.kernel.org Cc: linuxppc-dev@lists.ozlabs.org Cc: linux-arm-kernel@lists.infradead.org Cc: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Acked-by: David S. Miller <davem@davemloft.net> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-04-01spi/spidev: Use PTR_RET functionAlexandru Gheorghiu
Replaced calls to IS_ERR and PTR_ERR with PTR_RET function. Patch found using coccinelle. Signed-off-by: Alexandru Gheorghiu <gheorghiuandru@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-12-07spi: Remove HOTPLUG section attributesGrant Likely
CONFIG_HOTPLUG is going away as an option. As result the __dev* markings will be going away. Remove use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit. Bill Pemberton has done most of the legwork on this series. I've used his script to purge the attributes from the drivers/gpio tree. Reported-by: Bill Pemberton <wfp5p@virginia.edu> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2012-11-01spi: spidev: Add Rohm DH2228FV DAC compatible stringMaxime Ripard
Since we don't have a driver for it yet, use spidev instead. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-11-01spi: spidev: Add device tree bindingsMaxime Ripard
This will allow to probe spidev from device tree by adding the compatible string of each device to this array. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-06-06spi: reorganize driversGrant Likely
Sort the SPI makefile and enforce the naming convention spi_*.c for spi drivers. This change also rolls the contents of atmel_spi.h into the .c file since there is only one user of that particular include file. v2: - Use 'spi-' prefix instead of 'spi_' to match what seems to be be the predominant pattern for subsystem prefixes. - Clean up filenames in Kconfig and header comment blocks Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Linus Walleij <linus.walleij@linaro.org>
2011-02-03spi/spidev: Add 32 bit compat ioctl()Bernhard Walle
Add the compat_ioctl for operations on /dev/spi* so that 32 bit userspace applications can access SPI. As far as I can see all data structure are already prepared for that, so no additional conversion has to be done. My use case is MIPS with N32 userspace ABI and toolchain, and that was also the platform where I tested it successfully (Cavium Octeon). Signed-off-by: Bernhard Walle <walle@corscience.de> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-11-01tree-wide: fix comment/printk typosUwe Kleine-König
"gadget", "through", "command", "maintain", "maintain", "controller", "address", "between", "initiali[zs]e", "instead", "function", "select", "already", "equal", "access", "management", "hierarchy", "registration", "interest", "relative", "memory", "offset", "already", Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-10-15llseek: automatically add .llseek fopArnd Bergmann
All file_operations should get a .llseek operation so we can make nonseekable_open the default for future file operations without a .llseek pointer. The three cases that we can automatically detect are no_llseek, seq_lseek and default_llseek. For cases where we can we can automatically prove that the file offset is always ignored, we use noop_llseek, which maintains the current behavior of not returning an error from a seek. New drivers should normally not use noop_llseek but instead use no_llseek and call nonseekable_open at open time. Existing drivers can be converted to do the same when the maintainer knows for certain that no user code relies on calling seek on the device file. The generated code is often incorrectly indented and right now contains comments that clarify for each added line why a specific variant was chosen. In the version that gets submitted upstream, the comments will be gone and I will manually fix the indentation, because there does not seem to be a way to do that using coccinelle. Some amount of new code is currently sitting in linux-next that should get the same modifications, which I will do at the end of the merge window. Many thanks to Julia Lawall for helping me learn to write a semantic patch that does all this. ===== begin semantic patch ===== // This adds an llseek= method to all file operations, // as a preparation for making no_llseek the default. // // The rules are // - use no_llseek explicitly if we do nonseekable_open // - use seq_lseek for sequential files // - use default_llseek if we know we access f_pos // - use noop_llseek if we know we don't access f_pos, // but we still want to allow users to call lseek // @ open1 exists @ identifier nested_open; @@ nested_open(...) { <+... nonseekable_open(...) ...+> } @ open exists@ identifier open_f; identifier i, f; identifier open1.nested_open; @@ int open_f(struct inode *i, struct file *f) { <+... ( nonseekable_open(...) | nested_open(...) ) ...+> } @ read disable optional_qualifier exists @ identifier read_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; expression E; identifier func; @@ ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off) { <+... ( *off = E | *off += E | func(..., off, ...) | E = *off ) ...+> } @ read_no_fpos disable optional_qualifier exists @ identifier read_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; @@ ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off) { ... when != off } @ write @ identifier write_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; expression E; identifier func; @@ ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off) { <+... ( *off = E | *off += E | func(..., off, ...) | E = *off ) ...+> } @ write_no_fpos @ identifier write_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; @@ ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off) { ... when != off } @ fops0 @ identifier fops; @@ struct file_operations fops = { ... }; @ has_llseek depends on fops0 @ identifier fops0.fops; identifier llseek_f; @@ struct file_operations fops = { ... .llseek = llseek_f, ... }; @ has_read depends on fops0 @ identifier fops0.fops; identifier read_f; @@ struct file_operations fops = { ... .read = read_f, ... }; @ has_write depends on fops0 @ identifier fops0.fops; identifier write_f; @@ struct file_operations fops = { ... .write = write_f, ... }; @ has_open depends on fops0 @ identifier fops0.fops; identifier open_f; @@ struct file_operations fops = { ... .open = open_f, ... }; // use no_llseek if we call nonseekable_open //////////////////////////////////////////// @ nonseekable1 depends on !has_llseek && has_open @ identifier fops0.fops; identifier nso ~= "nonseekable_open"; @@ struct file_operations fops = { ... .open = nso, ... +.llseek = no_llseek, /* nonseekable */ }; @ nonseekable2 depends on !has_llseek @ identifier fops0.fops; identifier open.open_f; @@ struct file_operations fops = { ... .open = open_f, ... +.llseek = no_llseek, /* open uses nonseekable */ }; // use seq_lseek for sequential files ///////////////////////////////////// @ seq depends on !has_llseek @ identifier fops0.fops; identifier sr ~= "seq_read"; @@ struct file_operations fops = { ... .read = sr, ... +.llseek = seq_lseek, /* we have seq_read */ }; // use default_llseek if there is a readdir /////////////////////////////////////////// @ fops1 depends on !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier readdir_e; @@ // any other fop is used that changes pos struct file_operations fops = { ... .readdir = readdir_e, ... +.llseek = default_llseek, /* readdir is present */ }; // use default_llseek if at least one of read/write touches f_pos ///////////////////////////////////////////////////////////////// @ fops2 depends on !fops1 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read.read_f; @@ // read fops use offset struct file_operations fops = { ... .read = read_f, ... +.llseek = default_llseek, /* read accesses f_pos */ }; @ fops3 depends on !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier write.write_f; @@ // write fops use offset struct file_operations fops = { ... .write = write_f, ... + .llseek = default_llseek, /* write accesses f_pos */ }; // Use noop_llseek if neither read nor write accesses f_pos /////////////////////////////////////////////////////////// @ fops4 depends on !fops1 && !fops2 && !fops3 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read_no_fpos.read_f; identifier write_no_fpos.write_f; @@ // write fops use offset struct file_operations fops = { ... .write = write_f, .read = read_f, ... +.llseek = noop_llseek, /* read and write both use no f_pos */ }; @ depends on has_write && !has_read && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier write_no_fpos.write_f; @@ struct file_operations fops = { ... .write = write_f, ... +.llseek = noop_llseek, /* write uses no f_pos */ }; @ depends on has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read_no_fpos.read_f; @@ struct file_operations fops = { ... .read = read_f, ... +.llseek = noop_llseek, /* read uses no f_pos */ }; @ depends on !has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; @@ struct file_operations fops = { ... +.llseek = noop_llseek, /* no read or write fn */ }; ===== End semantic patch ===== Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Julia Lawall <julia@diku.dk> Cc: Christoph Hellwig <hch@infradead.org>
2009-12-17Merge branch 'next-spi' of git://git.secretlab.ca/git/linux-2.6Linus Torvalds
* 'next-spi' of git://git.secretlab.ca/git/linux-2.6: spi: spi_txx9.c: use resource_size() spi: spi_sh_sci.c: use resource_size() spi: spi_mpc8xxx.c: use resource_size() spi: spi_bfin5xx.c: use resource_size() spi: atmel_spi.c: use resource_size() spi: Add s3c64xx SPI Controller driver atmel_spi: fix dma addr calculation for len > BUFFER_SIZE spi_s3c24xx: add FIQ pseudo-DMA support spi: controller driver for Designware SPI core spidev: add proper section markers spidev: use DECLARE_BITMAP instead of declaring the array
2009-12-17spidev: add proper section markersMike Frysinger
The driver already uses __devexit_p() in the structure, but looks like actual __dev{init,exit} markings were forgotten. The spidev_spi driver also needs renaming to include a "_driver" suffix to avoid section mismatch warnings. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2009-12-17spidev: use DECLARE_BITMAP instead of declaring the arrayThadeu Lima de Souza Cascardo
[akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com> Cc: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2009-12-14Merge branch 'next-spi' of git://git.secretlab.ca/git/linux-2.6Linus Torvalds
* 'next-spi' of git://git.secretlab.ca/git/linux-2.6: (23 commits) spi: fix probe/remove section markings Add OMAP spi100k driver spi-imx: don't access struct device directly but use dev_get_platdata spi-imx: Add mx25 support spi-imx: use positive logic to distinguish cpu variants spi-imx: correct check for platform_get_irq failing ARM: NUC900: Add spi driver support for nuc900 spi: SuperH MSIOF SPI Master driver V2 spi: fix spidev compilation failure when VERBOSE is defined spi/au1550_spi: fix setupxfer not to override cfg with zeros spi/mpc8xxx: don't use __exit_p to wrap plat_mpc8xxx_spi_remove spi/i.MX: fix broken error handling for gpio_request spi/i.mx: drain MXC SPI transfer buffer when probing device MAINTAINERS: add SPI co-maintainer. spi/xilinx_spi: fix incorrect casting spi/mpc52xx-spi: minor cleanups xilinx_spi: add a platform driver using the xilinx_spi common module. xilinx_spi: add support for the DS570 IP. xilinx_spi: Switch to iomem functions and support little endian. xilinx_spi: Split into of driver and generic part. ...
2009-12-09Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (42 commits) tree-wide: fix misspelling of "definition" in comments reiserfs: fix misspelling of "journaled" doc: Fix a typo in slub.txt. inotify: remove superfluous return code check hdlc: spelling fix in find_pvc() comment doc: fix regulator docs cut-and-pasteism mtd: Fix comment in Kconfig doc: Fix IRQ chip docs tree-wide: fix assorted typos all over the place drivers/ata/libata-sff.c: comment spelling fixes fix typos/grammos in Documentation/edac.txt sysctl: add missing comments fs/debugfs/inode.c: fix comment typos sgivwfb: Make use of ARRAY_SIZE. sky2: fix sky2_link_down copy/paste comment error tree-wide: fix typos "couter" -> "counter" tree-wide: fix typos "offest" -> "offset" fix kerneldoc for set_irq_msi() spidev: fix double "of of" in comment comment typo fix: sybsystem -> subsystem ...
2009-12-08spi: fix spidev compilation failure when VERBOSE is definedFlorian Fainelli
When VERBOSE is defined in the spidev module, the compilation will throw an error on 'spi' not being defined: CC [M] drivers/spi/spidev.o drivers/spi/spidev.c: In function 'spidev_message': drivers/spi/spidev.c:266: error: 'spi' undeclared (first use in this function) drivers/spi/spidev.c:266: error: (Each undeclared identifier is reported only once drivers/spi/spidev.c:266: error: for each function it appears in.) instead of using spi-> we should actually use spidev->spi. This patch fixes the build failure. Signed-off-by: Florian Fainelli <ffainelli@freebox.fr> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2009-12-04spidev: fix double "of of" in commentThadeu Lima de Souza Cascardo
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-10-14spi: Remove BKL from spidev_openThomas Gleixner
The BKL was added there with the big pushdown. Remove it as the code is serialized already. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> LKML-Reference: <20091010153349.318535932@linutronix.de> Cc: David Brownell <dbrownell@users.sourceforge.net>
2009-10-01const: constify remaining file_operationsAlexey Dobriyan
[akpm@linux-foundation.org: fix KVM] Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Acked-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-23spi: prefix modalias with "spi:"Anton Vorontsov
This makes it consistent with other buses (platform, i2c, vio, ...). I'm not sure why we use the prefixes, but there must be a reason. This was easy enough to do it, and I did it. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Jean Delvare <khali@linux-fr.org> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Dmitry Torokhov <dtor@mail.ru> Cc: Samuel Ortiz <sameo@openedhand.com> Cc: "John W. Linville" <linville@tuxdriver.com> Acked-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-30spi: new spi->mode bitsDavid Brownell
Add two new spi_device.mode bits to accomodate more protocol options, and pass them through to usermode drivers: * SPI_NO_CS ... a second 3-wire variant, where the chipselect line is removed instead of a data line; transfers are still full duplex. This obviously has STRONG protocol implications since the chipselect transitions can't be used to synchronize state transitions with the SPI master. * SPI_READY ... defines open drain signal that's pulled low to pause the clock. This defines a 5-wire variant (normal 4-wire SPI plus READY) and two 4-wire variants (READY plus each of the 3-wire flavors). Such hardware flow control can be a big win. There are ADC converters and flash chips that expose READY signals, but not many host controllers support it today. The spi_bitbang code should be changed to use SPI_NO_CS instead of its current nonportable hack. That's a mode most hardware can easily support (unlike SPI_READY). Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Cc: "Paulraj, Sandeep" <s-paulraj@ti.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-12-01spi: avoid spidev crash when device is removedWolfgang Ocker
I saw a kernel oops in spidev_remove() when a spidev device was registered and I unloaded the SPI master driver: Unable to handle kernel paging request for data at address 0x00000004 Faulting instruction address: 0xc01c0c50 Oops: Kernel access of bad area, sig: 11 [#1] CDSPR Modules linked in: spi_ppc4xx(-) NIP: c01c0c50 LR: c01bf9e4 CTR: c01c0c34 REGS: cec89c30 TRAP: 0300 Not tainted (2.6.27.3izt) MSR: 00021000 <ME> CR: 24000228 XER: 20000007 DEAR: 00000004, ESR: 00800000 TASK = cf889040[2070] 'rmmod' THREAD: cec88000 GPR00: 00000000 cec89ce0 cf889040 cec8e000 00000004 cec8e000 ffffffff 00000000 GPR08: 0000001c c0336380 00000000 c01c0c34 00000001 1001a338 100e0000 100df49c GPR16: 100b54c0 100df49c 100ddd20 100f05a8 100b5340 100efd68 00000000 00000000 GPR24: 100ec008 100f0428 c0327788 c0327794 cec8e0ac cec8e000 c0336380 00000000 NIP [c01c0c50] spidev_remove+0x1c/0xe4 LR [c01bf9e4] spi_drv_remove+0x2c/0x3c Call Trace: [cec89d00] [c01bf9e4] spi_drv_remove+0x2c/0x3c [cec89d10] [c01859a0] __device_release_driver+0x78/0xb4 [cec89d20] [c0185ab0] device_release_driver+0x28/0x44 [cec89d40] [c0184be8] bus_remove_device+0xac/0xd8 [cec89d60] [c0183094] device_del+0x100/0x194 [cec89d80] [c0183140] device_unregister+0x18/0x30 [cec89da0] [c01bf30c] __unregister+0x20/0x34 [cec89db0] [c0182778] device_for_each_child+0x38/0x74 [cec89de0] [c01bf2d0] spi_unregister_master+0x28/0x44 [cec89e00] [c01bfeac] spi_bitbang_stop+0x1c/0x58 [cec89e20] [d908a5e0] spi_ppc4xx_of_remove+0x24/0x7c [spi_ppc4xx] [...] IMHO a call to spi_set_drvdata() is missing in spidev_probe(). The patch below helped. Signed-off-by: Wolfgang Ocker <weo@reccoware.de> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-16device create: misc: convert device_create_drvdata to device_createGreg Kroah-Hartman
Now that device_create() has been audited, rename things back to the original call to be sane. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-07-24spidev: BKL removalAlan Cox
Another step to removing ->ioctl and to removing the BKL [dbrownell@users.sourceforge.net: take final step; BKL not needed] Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>