summaryrefslogtreecommitdiff
path: root/drivers/tty
AgeCommit message (Collapse)Author
2022-05-19Merge remote-tracking branch 'gh-fslc/5.4-2.3.x-imx' into toradex_5.4-2.3.x-imxPhilippe Schenker
2022-05-19Merge tag 'v5.4.193' into update-to-2.3.7__5.4-2.3.x-imxPhilippe Schenker
This is the 5.4.193 stable release Conflicts: arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts drivers/edac/synopsys_edac.c drivers/mmc/host/sdhci-esdhc-imx.c drivers/mmc/host/sdhci.c drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c sound/soc/codecs/msm8916-wcd-analog.c
2022-05-09tty: n_gsm: fix incorrect UA handlingDaniel Starke
commit ff9166c623704337bd6fe66fce2838d9768a6634 upstream. n_gsm is based on the 3GPP 07.010 and its newer version is the 3GPP 27.010. See https://portal.3gpp.org/desktopmodules/Specifications/SpecificationDetails.aspx?specificationId=1516 The changes from 07.010 to 27.010 are non-functional. Therefore, I refer to the newer 27.010 here. Chapter 5.4.4.2 states that any received unnumbered acknowledgment (UA) with its poll/final (PF) bit set to 0 shall be discarded. Currently, all UA frame are handled in the same way regardless of the PF bit. This does not comply with the standard. Remove the UA case in gsm_queue() to process only UA frames with PF bit set to 1 to abide the standard. Fixes: e1eaea46bb40 ("tty: n_gsm line discipline") Cc: stable@vger.kernel.org Signed-off-by: Daniel Starke <daniel.starke@siemens.com> Link: https://lore.kernel.org/r/20220414094225.4527-20-daniel.starke@siemens.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-09tty: n_gsm: fix wrong command frame length field encodingDaniel Starke
commit 398867f59f956985f4c324f173eff7b946e14bd8 upstream. n_gsm is based on the 3GPP 07.010 and its newer version is the 3GPP 27.010. See https://portal.3gpp.org/desktopmodules/Specifications/SpecificationDetails.aspx?specificationId=1516 The changes from 07.010 to 27.010 are non-functional. Therefore, I refer to the newer 27.010 here. Chapter 5.4.6.1 states that each command frame shall be made up from type, length and value. Looking for example in chapter 5.4.6.3.5 at the description for the encoding of a flow control on command it becomes obvious, that the type and length field is always present whereas the value may be zero bytes long. The current implementation omits the length field if the value is not present. This is wrong. Correct this by always sending the length in gsm_control_transmit(). So far only the modem status command (MSC) has included a value and encoded its length directly. Therefore, also change gsmtty_modem_update(). Fixes: e1eaea46bb40 ("tty: n_gsm line discipline") Cc: stable@vger.kernel.org Signed-off-by: Daniel Starke <daniel.starke@siemens.com> Link: https://lore.kernel.org/r/20220414094225.4527-12-daniel.starke@siemens.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-09tty: n_gsm: fix wrong command retry handlingDaniel Starke
commit d0bcdffcad5a22f202e3bf37190c0dd8c080ea92 upstream. n_gsm is based on the 3GPP 07.010 and its newer version is the 3GPP 27.010. See https://portal.3gpp.org/desktopmodules/Specifications/SpecificationDetails.aspx?specificationId=1516 The changes from 07.010 to 27.010 are non-functional. Therefore, I refer to the newer 27.010 here. Chapter 5.7.3 states that the valid range for the maximum number of retransmissions (N2) is from 0 to 255 (both including). gsm_config() fails to limit this range correctly. Furthermore, gsm_control_retransmit() handles this number incorrectly by performing N2 - 1 retransmission attempts. Setting N2 to zero results in more than 255 retransmission attempts. Fix the range check in gsm_config() and the value handling in gsm_control_send() and gsm_control_retransmit() to comply with 3GPP 27.010. Fixes: e1eaea46bb40 ("tty: n_gsm line discipline") Cc: stable@vger.kernel.org Signed-off-by: Daniel Starke <daniel.starke@siemens.com> Link: https://lore.kernel.org/r/20220414094225.4527-11-daniel.starke@siemens.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-09tty: n_gsm: fix missing explicit ldisc flushDaniel Starke
commit 17eac652028501df7ea296b1d9b9c134db262b7d upstream. In gsm_cleanup_mux() the muxer is closed down and all queues are removed. However, removing the queues is done without explicit control of the underlying buffers. Flush those before freeing up our queues to ensure that all outgoing queues are cleared consistently. Otherwise, a new mux connection establishment attempt may time out while the underlying tty is still busy sending out the remaining data from the previous connection. Fixes: e1eaea46bb40 ("tty: n_gsm line discipline") Cc: stable@vger.kernel.org Signed-off-by: Daniel Starke <daniel.starke@siemens.com> Link: https://lore.kernel.org/r/20220414094225.4527-10-daniel.starke@siemens.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-09tty: n_gsm: fix insufficient txframe sizeDaniel Starke
commit 535bf600de75a859698892ee873521a48d289ec1 upstream. n_gsm is based on the 3GPP 07.010 and its newer version is the 3GPP 27.010. See https://portal.3gpp.org/desktopmodules/Specifications/SpecificationDetails.aspx?specificationId=1516 The changes from 07.010 to 27.010 are non-functional. Therefore, I refer to the newer 27.010 here. Chapter 5.7.2 states that the maximum frame size (N1) refers to the length of the information field (i.e. user payload). However, 'txframe' stores the whole frame including frame header, checksum and start/end flags. We also need to consider the byte stuffing overhead. Define constant for the protocol overhead and adjust the 'txframe' size calculation accordingly to reserve enough space for a complete mux frame including byte stuffing for advanced option mode. Note that no byte stuffing is applied to the start and end flag. Also use MAX_MTU instead of MAX_MRU as this buffer is used for data transmission. Fixes: e1eaea46bb40 ("tty: n_gsm line discipline") Cc: stable@vger.kernel.org Signed-off-by: Daniel Starke <daniel.starke@siemens.com> Link: https://lore.kernel.org/r/20220414094225.4527-8-daniel.starke@siemens.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-09tty: n_gsm: fix malformed counter for out of frame dataDaniel Starke
commit a24b4b2f660b7ddf3f484b37600bba382cb28a9d upstream. The gsm_mux field 'malformed' represents the number of malformed frames received. However, gsm1_receive() also increases this counter for any out of frame byte. Fix this by ignoring out of frame data for the malformed counter. Fixes: e1eaea46bb40 ("tty: n_gsm line discipline") Cc: stable@vger.kernel.org Signed-off-by: Daniel Starke <daniel.starke@siemens.com> Link: https://lore.kernel.org/r/20220414094225.4527-7-daniel.starke@siemens.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-09tty: n_gsm: fix wrong signal octet encoding in convergence layer type 2Daniel Starke
commit 06d5afd4d640eea67f5623e76cd5fc03359b7f3c upstream. n_gsm is based on the 3GPP 07.010 and its newer version is the 3GPP 27.010. See https://portal.3gpp.org/desktopmodules/Specifications/SpecificationDetails.aspx?specificationId=1516 The changes from 07.010 to 27.010 are non-functional. Therefore, I refer to the newer 27.010 here. Chapter 5.5.2 describes that the signal octet in convergence layer type 2 can be either one or two bytes. The length is encoded in the EA bit. This is set 1 for the last byte in the sequence. gsmtty_modem_update() handles this correctly but gsm_dlci_data_output() fails to set EA to 1. There is no case in which we encode two signal octets as there is no case in which we send out a break signal. Therefore, always set the EA bit to 1 for the signal octet to fix this. Fixes: e1eaea46bb40 ("tty: n_gsm line discipline") Cc: stable@vger.kernel.org Signed-off-by: Daniel Starke <daniel.starke@siemens.com> Link: https://lore.kernel.org/r/20220414094225.4527-5-daniel.starke@siemens.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-09serial: 8250: Correct the clock for EndRun PTP/1588 PCIe deviceMaciej W. Rozycki
commit 637674fa40059cddcc3ad2212728965072f62ea3 upstream. The EndRun PTP/1588 dual serial port device is based on the Oxford Semiconductor OXPCIe952 UART device with the PCI vendor:device ID set for EndRun Technologies and is therefore driven by a fixed 62.5MHz clock input derived from the 100MHz PCI Express clock. The clock rate is divided by the oversampling rate of 16 as it is supplied to the baud rate generator, yielding the baud base of 3906250. Replace the incorrect baud base of 4000000 with the right value of 3906250 then, complementing commit 6cbe45d8ac93 ("serial: 8250: Correct the clock for OxSemi PCIe devices"). Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk> Cc: stable <stable@kernel.org> Fixes: 1bc8cde46a159 ("8250_pci: Added driver for Endrun Technologies PTP PCIe card.") Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/alpine.DEB.2.21.2204181515270.9383@angie.orcam.me.uk Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-09serial: 8250: Also set sticky MCR bits in console restorationMaciej W. Rozycki
commit 6e6eebdf5e2455f089ccd000754a0deaeb79af82 upstream. Sticky MCR bits are lost in console restoration if console suspending has been disabled. This currently affects the AFE bit, which works in combination with RTS which we set, so we want to make sure the UART retains control of its FIFO where previously requested. Also specific drivers may need other bits in the future. Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk> Fixes: 4516d50aabed ("serial: 8250: Use canary to restart console after suspend") Cc: stable@vger.kernel.org # v4.0+ Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/alpine.DEB.2.21.2204181518490.9383@angie.orcam.me.uk Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-09serial: imx: fix overrun interrupts in DMA modeJohan Hovold
commit 3ee82c6e41f3d2212647ce0bc5a05a0f69097824 upstream. Commit 76821e222c18 ("serial: imx: ensure that RX irqs are off if RX is off") accidentally enabled overrun interrupts unconditionally when deferring DMA enable until after the receiver has been enabled during startup. Fix this by using the DMA-initialised instead of DMA-enabled flag to determine whether overrun interrupts should be enabled. Note that overrun interrupts are already accounted for in imx_uart_clear_rx_errors() when using DMA since commit 41d98b5da92f ("serial: imx-serial - update RX error counters when DMA is used"). Fixes: 76821e222c18 ("serial: imx: ensure that RX irqs are off if RX is off") Cc: stable@vger.kernel.org # 4.17 Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20220411081957.7846-1-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-15serial: samsung_tty: do not unlock port->lock for uart_write_wakeup()Jiri Slaby
[ Upstream commit 988c7c00691008ea1daaa1235680a0da49dab4e8 ] The commit c15c3747ee32 (serial: samsung: fix potential soft lockup during uart write) added an unlock of port->lock before uart_write_wakeup() and a lock after it. It was always problematic to write data from tty_ldisc_ops::write_wakeup and it was even documented that way. We fixed the line disciplines to conform to this recently. So if there is still a missed one, we should fix them instead of this workaround. On the top of that, s3c24xx_serial_tx_dma_complete() in this driver still holds the port->lock while calling uart_write_wakeup(). So revert the wrap added by the commit above. Cc: Thomas Abraham <thomas.abraham@linaro.org> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Hyeonkook Kim <hk619.kim@samsung.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz> Link: https://lore.kernel.org/r/20220308115153.4225-1-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-15kgdboc: fix return value of __setup handlerRandy Dunlap
[ Upstream commit ab818c7aa7544bf8d2dd4bdf68878b17a02eb332 ] __setup() handlers should return 1 to obsolete_checksetup() in init/main.c to indicate that the boot option has been handled. A return of 0 causes the boot option/value to be listed as an Unknown kernel parameter and added to init's (limited) environment strings. So return 1 from kgdboc_option_setup(). Unknown kernel command line parameters "BOOT_IMAGE=/boot/bzImage-517rc7 kgdboc=kbd kgdbts=", will be passed to user space. Run /sbin/init as init process with arguments: /sbin/init with environment: HOME=/ TERM=linux BOOT_IMAGE=/boot/bzImage-517rc7 kgdboc=kbd kgdbts= Link: lore.kernel.org/r/64644a2f-4a20-bab3-1e15-3b2cdd0defe3@omprussia.ru Fixes: 1bd54d851f50 ("kgdboc: Passing ekgdboc to command line causes panic") Fixes: f2d937f3bf00 ("consoles: polling support, kgdboc") Cc: He Zhe <zhe.he@windriver.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jiri Slaby <jirislaby@kernel.org> Cc: kgdb-bugreport@lists.sourceforge.net Cc: Jason Wessel <jason.wessel@windriver.com> Cc: Daniel Thompson <daniel.thompson@linaro.org> Cc: Douglas Anderson <dianders@chromium.org> Cc: linux-serial@vger.kernel.org Reported-by: Igor Zhbanov <i.zhbanov@omprussia.ru> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Link: https://lore.kernel.org/r/20220309033018.17936-1-rdunlap@infradead.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-15tty: hvc: fix return value of __setup handlerRandy Dunlap
[ Upstream commit 53819a0d97aace1425bb042829e3446952a9e8a9 ] __setup() handlers should return 1 to indicate that the boot option has been handled or 0 to indicate that it was not handled. Add a pr_warn() message if the option value is invalid and then always return 1. Link: lore.kernel.org/r/64644a2f-4a20-bab3-1e15-3b2cdd0defe3@omprussia.ru Fixes: 86b40567b917 ("tty: replace strict_strtoul() with kstrtoul()") Cc: Jingoo Han <jg1.han@samsung.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jiri Slaby <jirislaby@kernel.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Julian Wiedmann <jwi@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: linuxppc-dev@lists.ozlabs.org Reported-by: Igor Zhbanov <i.zhbanov@omprussia.ru> Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Link: https://lore.kernel.org/r/20220308024228.20477-1-rdunlap@infradead.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-15serial: 8250: Fix race condition in RTS-after-send handlingUwe Kleine-König
[ Upstream commit dedab69fd650ea74710b2e626e63fd35584ef773 ] Set em485->active_timer = NULL isn't always enough to take out the stop timer. While there is a check that it acts in the right state (i.e. waiting for RTS-after-send to pass after sending some chars) but the following might happen: - CPU1: some chars send, shifter becomes empty, stop tx timer armed - CPU0: more chars send before RTS-after-send expired - CPU0: shifter empty irq, port lock taken - CPU1: tx timer triggers, waits for port lock - CPU0: em485->active_timer = &em485->stop_tx_timer, hrtimer_start(), releases lock() - CPU1: get lock, see em485->active_timer == &em485->stop_tx_timer, tear down RTS too early This fix bases on research done by Steffen Trumtrar. Fixes: b86f86e8e7c5 ("serial: 8250: fix potential deadlock in rs485-mode") Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20220215160236.344236-1-u.kleine-koenig@pengutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-15serial: 8250_mid: Balance reference count for PCI DMA deviceAndy Shevchenko
[ Upstream commit 67ec6dd0b257bd81b4e9fcac89b29da72f6265e5 ] The pci_get_slot() increases its reference count, the caller must decrement the reference count by calling pci_dev_put(). Fixes: 90b9aacf912a ("serial: 8250_pci: add Intel Tangier support") Fixes: f549e94effa1 ("serial: 8250_pci: add Intel Penwell ports") Reported-by: Qing Wang <wangqing@vivo.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Depends-on: d9eda9bab237 ("serial: 8250_pci: Intel MID UART support to its own driver") Link: https://lore.kernel.org/r/20220215100920.41984-1-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-15mxser: fix xmit_buf leak in activate when LSR == 0xffJiri Slaby
[ Upstream commit cd3a4907ee334b40d7aa880c7ab310b154fd5cd4 ] When LSR is 0xff in ->activate() (rather unlike), we return an error. Provided ->shutdown() is not called when ->activate() fails, nothing actually frees the buffer in this case. Fix this by properly freeing the buffer in a designated label. We jump there also from the "!info->type" if now too. Fixes: 6769140d3047 ("tty: mxser: use the tty_port_open method") Signed-off-by: Jiri Slaby <jslaby@suse.cz> Link: https://lore.kernel.org/r/20220124071430.14907-6-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-03-02tty: n_gsm: fix NULL pointer access due to DLCI releasedaniel.starke@siemens.com
commit 96b169f05cdcc844b400695184d77e42071d14f2 upstream. The here fixed commit made the tty hangup asynchronous to avoid a circular locking warning. I could not reproduce this warning. Furthermore, due to the asynchronous hangup the function call now gets queued up while the underlying tty is being freed. Depending on the timing this results in a NULL pointer access in the global work queue scheduler. To be precise in process_one_work(). Therefore, the previous commit made the issue worse which it tried to fix. This patch fixes this by falling back to the old behavior which uses a blocking tty hangup call before freeing up the associated tty. Fixes: 7030082a7415 ("tty: n_gsm: avoid recursive locking with async port hangup") Cc: stable@vger.kernel.org Signed-off-by: Daniel Starke <daniel.starke@siemens.com> Link: https://lore.kernel.org/r/20220218073123.2121-4-daniel.starke@siemens.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-03-02tty: n_gsm: fix proper link termination after failed opendaniel.starke@siemens.com
commit e3b7468f082d106459e86e8dc6fb9bdd65553433 upstream. Trying to open a DLCI by sending a SABM frame may fail with a timeout. The link is closed on the initiator side without informing the responder about this event. The responder assumes the link is open after sending a UA frame to answer the SABM frame. The link gets stuck in a half open state. This patch fixes this by initiating the proper link termination procedure after link setup timeout instead of silently closing it down. Fixes: e1eaea46bb40 ("tty: n_gsm line discipline") Cc: stable@vger.kernel.org Signed-off-by: Daniel Starke <daniel.starke@siemens.com> Link: https://lore.kernel.org/r/20220218073123.2121-3-daniel.starke@siemens.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-03-02tty: n_gsm: fix encoding of control signal octet bit DVdaniel.starke@siemens.com
commit 737b0ef3be6b319d6c1fd64193d1603311969326 upstream. n_gsm is based on the 3GPP 07.010 and its newer version is the 3GPP 27.010. See https://portal.3gpp.org/desktopmodules/Specifications/SpecificationDetails.aspx?specificationId=1516 The changes from 07.010 to 27.010 are non-functional. Therefore, I refer to the newer 27.010 here. Chapter 5.4.6.3.7 describes the encoding of the control signal octet used by the MSC (modem status command). The same encoding is also used in convergence layer type 2 as described in chapter 5.5.2. Table 7 and 24 both require the DV (data valid) bit to be set 1 for outgoing control signal octets sent by the DTE (data terminal equipment), i.e. for the initiator side. Currently, the DV bit is only set if CD (carrier detect) is on, regardless of the side. This patch fixes this behavior by setting the DV bit on the initiator side unconditionally. Fixes: e1eaea46bb40 ("tty: n_gsm line discipline") Cc: stable@vger.kernel.org Signed-off-by: Daniel Starke <daniel.starke@siemens.com> Link: https://lore.kernel.org/r/20220218073123.2121-1-daniel.starke@siemens.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-23serial: parisc: GSC: fix build when IOSAPIC is not setRandy Dunlap
commit 6e8793674bb0d1135ca0e5c9f7e16fecbf815926 upstream. There is a build error when using a kernel .config file from 'kernel test robot' for a different build problem: hppa64-linux-ld: drivers/tty/serial/8250/8250_gsc.o: in function `.LC3': (.data.rel.ro+0x18): undefined reference to `iosapic_serial_irq' when: CONFIG_GSC=y CONFIG_SERIO_GSCPS2=y CONFIG_SERIAL_8250_GSC=y CONFIG_PCI is not set and hence PCI_LBA is not set. IOSAPIC depends on PCI_LBA, so IOSAPIC is not set/enabled. Make the use of iosapic_serial_irq() conditional to fix the build error. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: kernel test robot <lkp@intel.com> Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com> Cc: Helge Deller <deller@gmx.de> Cc: linux-parisc@vger.kernel.org Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: linux-serial@vger.kernel.org Cc: Jiri Slaby <jirislaby@kernel.org> Cc: Johan Hovold <johan@kernel.org> Suggested-by: Helge Deller <deller@gmx.de> Signed-off-by: Helge Deller <deller@gmx.de> Cc: stable@vger.kernel.org Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-16n_tty: wake up poll(POLLRDNORM) on receiving dataTATSUKAWA KOSUKE (立川 江介)
commit c816b2e65b0e86b95011418cad334f0524fc33b8 upstream. The poll man page says POLLRDNORM is equivalent to POLLIN when used as an event. $ man poll <snip> POLLRDNORM Equivalent to POLLIN. However, in n_tty driver, POLLRDNORM does not return until timeout even if there is terminal input, whereas POLLIN returns. The following test program works until kernel-3.17, but the test stops in poll() after commit 57087d515441 ("tty: Fix spurious poll() wakeups"). [Steps to run test program] $ cc -o test-pollrdnorm test-pollrdnorm.c $ ./test-pollrdnorm foo <-- Type in something from the terminal followed by [RET]. The string should be echoed back. ------------------------< test-pollrdnorm.c >------------------------ #include <stdio.h> #include <errno.h> #include <poll.h> #include <unistd.h> void main(void) { int n; unsigned char buf[8]; struct pollfd fds[1] = {{ 0, POLLRDNORM, 0 }}; n = poll(fds, 1, -1); if (n < 0) perror("poll"); n = read(0, buf, 8); if (n < 0) perror("read"); if (n > 0) write(1, buf, n); } ------------------------------------------------------------------------ The attached patch fixes this problem. Many calls to wake_up_interruptible_poll() in the kernel source code already specify "POLLIN | POLLRDNORM". Fixes: 57087d515441 ("tty: Fix spurious poll() wakeups") Cc: stable@vger.kernel.org Signed-off-by: Kosuke Tatsukawa <tatsu-ab1@nec.com> Link: https://lore.kernel.org/r/TYCPR01MB81901C0F932203D30E452B3EA5209@TYCPR01MB8190.jpnprd01.prod.outlook.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-16vt_ioctl: add array_index_nospec to VT_ACTIVATEJakob Koschel
commit 28cb138f559f8c1a1395f5564f86b8bbee83631b upstream. in vt_setactivate an almost identical code path has been patched with array_index_nospec. In the VT_ACTIVATE path the user input is from a system call argument instead of a usercopy. For consistency both code paths should have the same mitigations applied. Kasper Acknowledgements: Jakob Koschel, Brian Johannesmeyer, Kaveh Razavi, Herbert Bos, Cristiano Giuffrida from the VUSec group at VU Amsterdam. Co-developed-by: Brian Johannesmeyer <bjohannesmeyer@gmail.com> Signed-off-by: Brian Johannesmeyer <bjohannesmeyer@gmail.com> Signed-off-by: Jakob Koschel <jakobkoschel@gmail.com> Link: https://lore.kernel.org/r/20220127144406.3589293-2-jakobkoschel@gmail.com Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-16vt_ioctl: fix array_index_nospec in vt_setactivateJakob Koschel
commit 61cc70d9e8ef5b042d4ed87994d20100ec8896d9 upstream. array_index_nospec ensures that an out-of-bounds value is set to zero on the transient path. Decreasing the value by one afterwards causes a transient integer underflow. vsa.console should be decreased first and then sanitized with array_index_nospec. Kasper Acknowledgements: Jakob Koschel, Brian Johannesmeyer, Kaveh Razavi, Herbert Bos, Cristiano Giuffrida from the VUSec group at VU Amsterdam. Co-developed-by: Brian Johannesmeyer <bjohannesmeyer@gmail.com> Signed-off-by: Brian Johannesmeyer <bjohannesmeyer@gmail.com> Signed-off-by: Jakob Koschel <jakobkoschel@gmail.com> Link: https://lore.kernel.org/r/20220127144406.3589293-1-jakobkoschel@gmail.com Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-01tty: Add support for Brainboxes UC cards.Cameron Williams
commit 152d1afa834c84530828ee031cf07a00e0fc0b8c upstream. This commit adds support for the some of the Brainboxes PCI range of cards, including the UC-101, UC-235/246, UC-257, UC-268, UC-275/279, UC-302, UC-310, UC-313, UC-320/324, UC-346, UC-357, UC-368 and UC-420/431. Signed-off-by: Cameron Williams <cang1@live.co.uk> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/AM5PR0202MB2564688493F7DD9B9C610827C45E9@AM5PR0202MB2564.eurprd02.prod.outlook.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-01tty: n_gsm: fix SW flow control encoding/handlingdaniel.starke@siemens.com
commit 8838b2af23caf1ff0610caef2795d6668a013b2d upstream. n_gsm is based on the 3GPP 07.010 and its newer version is the 3GPP 27.010. See https://portal.3gpp.org/desktopmodules/Specifications/SpecificationDetails.aspx?specificationId=1516 The changes from 07.010 to 27.010 are non-functional. Therefore, I refer to the newer 27.010 here. Chapter 5.2.7.3 states that DC1 (XON) and DC3 (XOFF) are the control characters defined in ISO/IEC 646. These shall be quoted if seen in the data stream to avoid interpretation as flow control characters. ISO/IEC 646 refers to the set of ISO standards described as the ISO 7-bit coded character set for information interchange. Its final version is also known as ITU T.50. See https://www.itu.int/rec/T-REC-T.50-199209-I/en To abide the standard it is needed to quote DC1 and DC3 correctly if these are seen as data bytes and not as control characters. The current implementation already tries to enforce this but fails to catch all defined cases. 3GPP 27.010 chapter 5.2.7.3 clearly states that the most significant bit shall be ignored for DC1 and DC3 handling. The current implementation handles only the case with the most significant bit set 0. Cases in which DC1 and DC3 have the most significant bit set 1 are left unhandled. This patch fixes this by masking the data bytes with ISO_IEC_646_MASK (only the 7 least significant bits set 1) before comparing them with XON (a.k.a. DC1) and XOFF (a.k.a. DC3) when testing which byte values need quotation via byte stuffing. Fixes: e1eaea46bb40 ("tty: n_gsm line discipline") Cc: stable@vger.kernel.org Signed-off-by: Daniel Starke <daniel.starke@siemens.com> Link: https://lore.kernel.org/r/20220120101857.2509-1-daniel.starke@siemens.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-01serial: stm32: fix software flow control transferValentin Caron
commit 037b91ec7729524107982e36ec4b40f9b174f7a2 upstream. x_char is ignored by stm32_usart_start_tx() when xmit buffer is empty. Fix start_tx condition to allow x_char to be sent. Fixes: 48a6092fb41f ("serial: stm32-usart: Add STM32 USART Driver") Cc: stable <stable@vger.kernel.org> Signed-off-by: Erwan Le Ray <erwan.leray@foss.st.com> Signed-off-by: Valentin Caron <valentin.caron@foss.st.com> Link: https://lore.kernel.org/r/20220111164441.6178-3-valentin.caron@foss.st.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-01serial: 8250: of: Fix mapped region size when using reg-offset propertyRobert Hancock
commit d06b1cf28297e27127d3da54753a3a01a2fa2f28 upstream. 8250_of supports a reg-offset property which is intended to handle cases where the device registers start at an offset inside the region of memory allocated to the device. The Xilinx 16550 UART, for which this support was initially added, requires this. However, the code did not adjust the overall size of the mapped region accordingly, causing the driver to request an area of memory past the end of the device's allocation. For example, if the UART was allocated an address of 0xb0130000, size of 0x10000 and reg-offset of 0x1000 in the device tree, the region of memory reserved was b0131000-b0140fff, which caused the driver for the region starting at b0140000 to fail to probe. Fix this by subtracting reg-offset from the mapped region size. Fixes: b912b5e2cfb3 ([POWERPC] Xilinx: of_serial support for Xilinx uart 16550.) Cc: stable <stable@vger.kernel.org> Signed-off-by: Robert Hancock <robert.hancock@calian.com> Link: https://lore.kernel.org/r/20220112194214.881844-1-robert.hancock@calian.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-27serial: Fix incorrect rs485 polarity on uart openLukas Wunner
commit d3b3404df318504ec084213ab1065b73f49b0f1d upstream. Commit a6845e1e1b78 ("serial: core: Consider rs485 settings to drive RTS") sought to deassert RTS when opening an rs485-enabled uart port. That way, the transceiver does not occupy the bus until it transmits data. Unfortunately, the commit mixed up the logic and *asserted* RTS instead of *deasserting* it: The commit amended uart_port_dtr_rts(), which raises DTR and RTS when opening an rs232 port. "Raising" actually means lowering the signal that's coming out of the uart, because an rs232 transceiver not only changes a signal's voltage level, it also *inverts* the signal. See the simplified schematic in the MAX232 datasheet for an example: https://www.ti.com/lit/ds/symlink/max232.pdf So, to raise RTS on an rs232 port, TIOCM_RTS is *set* in port->mctrl and that results in the signal being driven low. In contrast to rs232, the signal level for rs485 Transmit Enable is the identity, not the inversion: If the transceiver expects a "high" RTS signal for Transmit Enable, the signal coming out of the uart must also be high, so TIOCM_RTS must be *cleared* in port->mctrl. The commit did the exact opposite, but it's easy to see why given the confusing semantics of rs232 and rs485. Fix it. Fixes: a6845e1e1b78 ("serial: core: Consider rs485 settings to drive RTS") Cc: stable@vger.kernel.org # v4.14+ Cc: Rafael Gago Castano <rgc@hms.se> Cc: Jan Kiszka <jan.kiszka@siemens.com> Cc: Su Bao Cheng <baocheng.su@siemens.com> Signed-off-by: Lukas Wunner <lukas@wunner.de> Link: https://lore.kernel.org/r/9395767847833f2f3193c49cde38501eeb3b5669.1639821059.git.lukas@wunner.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-27serial: core: Keep mctrl register state and cached copy in syncLukas Wunner
[ Upstream commit 93a770b7e16772530196674ffc79bb13fa927dc6 ] struct uart_port contains a cached copy of the Modem Control signals. It is used to skip register writes in uart_update_mctrl() if the new signal state equals the old signal state. It also avoids a register read to obtain the current state of output signals. When a uart_port is registered, uart_configure_port() changes signal state but neglects to keep the cached copy in sync. That may cause a subsequent register write to be incorrectly skipped. Fix it before it trips somebody up. This behavior has been present ever since the serial core was introduced in 2002: https://git.kernel.org/history/history/c/33c0d1b0c3eb So far it was never an issue because the cached copy is initialized to 0 by kzalloc() and when uart_configure_port() is executed, at most DTR has been set by uart_set_options() or sunsu_console_setup(). Therefore, a stable designation seems unnecessary. Signed-off-by: Lukas Wunner <lukas@wunner.de> Link: https://lore.kernel.org/r/bceeaba030b028ed810272d55d5fc6f3656ddddb.1641129752.git.lukas@wunner.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-01-27serial: pl010: Drop CR register reset on set_termiosLukas Wunner
[ Upstream commit 08a0c6dff91c965e39905cf200d22db989203ccb ] pl010_set_termios() briefly resets the CR register to zero. Where does this register write come from? The PL010 driver's IRQ handler ambauart_int() originally modified the CR register without holding the port spinlock. ambauart_set_termios() also modified that register. To prevent concurrent read-modify-writes by the IRQ handler and to prevent transmission while changing baudrate, ambauart_set_termios() had to disable interrupts. That is achieved by writing zero to the CR register. However in 2004 the PL010 driver was amended to acquire the port spinlock in the IRQ handler, obviating the need to disable interrupts in ->set_termios(): https://git.kernel.org/history/history/c/157c0342e591 That rendered the CR register write obsolete. Drop it. Cc: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Lukas Wunner <lukas@wunner.de> Link: https://lore.kernel.org/r/fcaff16e5b1abb4cc3da5a2879ac13f278b99ed0.1641128728.git.lukas@wunner.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-01-27serial: amba-pl011: do not request memory region twiceLino Sanfilippo
[ Upstream commit d1180405c7b5c7a1c6bde79d5fc24fe931430737 ] With commit 3873e2d7f63a ("drivers: PL011: refactor pl011_probe()") the function devm_ioremap() called from pl011_setup_port() was replaced with devm_ioremap_resource(). Since this function not only remaps but also requests the ports io memory region it now collides with the .config_port() callback which requests the same region at uart port registration. Since devm_ioremap_resource() already claims the memory successfully, the request in .config_port() fails. Later at uart port deregistration the attempt to release the unclaimed memory also fails. The failure results in a “Trying to free nonexistent resource" warning. Fix these issues by removing the callbacks that implement the redundant memory allocation/release. Also make sure that changing the drivers io memory base address via TIOCSSERIAL is not allowed any more. Fixes: 3873e2d7f63a ("drivers: PL011: refactor pl011_probe()") Signed-off-by: Lino Sanfilippo <LinoSanfilippo@gmx.de> Link: https://lore.kernel.org/r/20211129174238.8333-1-LinoSanfilippo@gmx.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-01-27tty: serial: uartlite: allow 64 bit addressLizhi Hou
[ Upstream commit 3672fb65155530b5eea6225685c75329b6debec3 ] The base address of uartlite registers could be 64 bit address which is from device resource. When ulite_probe() calls ulite_assign(), this 64 bit address is casted to 32-bit. The fix is to replace "u32" type with "phys_addr_t" type for the base address in ulite_assign() argument list. Fixes: 8fa7b6100693 ("[POWERPC] Uartlite: Separate the bus binding from the driver proper") Signed-off-by: Lizhi Hou <lizhi.hou@xilinx.com> Link: https://lore.kernel.org/r/20211129202302.1319033-1-lizhi.hou@xilinx.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-01-27tty: serial: atmel: Call dma_async_issue_pending()Tudor Ambarus
[ Upstream commit 4f4b9b5895614eb2e2b5f4cab7858f44bd113e1b ] The driver wrongly assummed that tx_submit() will start the transfer, which is not the case, now that the at_xdmac driver is fixed. tx_submit is supposed to push the current transaction descriptor to a pending queue, waiting for issue_pending to be called. issue_pending must start the transfer, not tx_submit. Fixes: 34df42f59a60 ("serial: at91: add rx dma support") Fixes: 08f738be88bb ("serial: at91: add tx dma support") Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Link: https://lore.kernel.org/r/20211125090028.786832-4-tudor.ambarus@microchip.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-01-27tty: serial: atmel: Check return code of dmaengine_submit()Tudor Ambarus
[ Upstream commit 1e67bd2b8cb90b66e89562598e9c2046246832d3 ] The tx_submit() method of struct dma_async_tx_descriptor is entitled to do sanity checks and return errors if encountered. It's not the case for the DMA controller drivers that this client is using (at_h/xdmac), because they currently don't do sanity checks and always return a positive cookie at tx_submit() method. In case the controller drivers will implement sanity checks and return errors, print a message so that the client will be informed that something went wrong at tx_submit() level. Fixes: 08f738be88bb ("serial: at91: add tx dma support") Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Acked-by: Richard Genoud <richard.genoud@gmail.com> Link: https://lore.kernel.org/r/20211125090028.786832-3-tudor.ambarus@microchip.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-01-12Merge remote-tracking branch 'fscl/5.4-2.3.x-imx' into ↵Denys Drozdov
toradex_5.4-2.3.x-imx-v5.4.161 Conflicts: drivers/net/phy/micrel.c drivers/usb/chipidea/core.c
2022-01-10Merge tag 'v5.4.160' into HEADDenys Drozdov
This is the 5.4.160 stable release
2021-12-29serial: 8250_fintek: Fix garbled text for consoleJi-Ze Hong (Peter Hong)
commit 6c33ff728812aa18792afffaf2c9873b898e7512 upstream. Commit fab8a02b73eb ("serial: 8250_fintek: Enable high speed mode on Fintek F81866") introduced support to use high baudrate with Fintek SuperIO UARTs. It'll change clocksources when the UART probed. But when user add kernel parameter "console=ttyS0,115200 console=tty0" to make the UART as console output, the console will output garbled text after the following kernel message. [ 3.681188] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled The issue is occurs in following step: probe_setup_port() -> fintek_8250_goto_highspeed() It change clocksource from 115200 to 921600 with wrong time, it should change clocksource in set_termios() not in probed. The following 3 patches are implemented change clocksource in fintek_8250_set_termios(). Commit 58178914ae5b ("serial: 8250_fintek: UART dynamic clocksource on Fintek F81216H") Commit 195638b6d44f ("serial: 8250_fintek: UART dynamic clocksource on Fintek F81866") Commit 423d9118c624 ("serial: 8250_fintek: Add F81966 Support") Due to the high baud rate had implemented above 3 patches and the patch Commit fab8a02b73eb ("serial: 8250_fintek: Enable high speed mode on Fintek F81866") is bugged, So this patch will remove it. Fixes: fab8a02b73eb ("serial: 8250_fintek: Enable high speed mode on Fintek F81866") Signed-off-by: Ji-Ze Hong (Peter Hong) <hpeter+linux_kernel@gmail.com> Link: https://lore.kernel.org/r/20211215075835.2072-1-hpeter+linux_kernel@gmail.com Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-22xen/console: harden hvc_xen against event channel stormsJuergen Gross
commit fe415186b43df0db1f17fa3a46275fd92107fe71 upstream. The Xen console driver is still vulnerable for an attack via excessive number of events sent by the backend. Fix that by using a lateeoi event channel. For the normal domU initial console this requires the introduction of bind_evtchn_to_irq_lateeoi() as there is no xenbus device available at the time the event channel is bound to the irq. As the decision whether an interrupt was spurious or not requires to test for bytes having been read from the backend, move sending the event into the if statement, as sending an event without having found any bytes to be read is making no sense at all. This is part of XSA-391 Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-14serial: tegra: Change lower tolerance baud rate limit for tegra20 and tegra30Patrik John
commit b40de7469ef135161c80af0e8c462298cc5dac00 upstream. The current implementation uses 0 as lower limit for the baud rate tolerance for tegra20 and tegra30 chips which causes isses on UART initialization as soon as baud rate clock is lower than required even when within the standard UART tolerance of +/- 4%. This fix aligns the implementation with the initial commit description of +/- 4% tolerance for tegra chips other than tegra186 and tegra194. Fixes: d781ec21bae6 ("serial: tegra: report clk rate errors") Cc: stable <stable@vger.kernel.org> Signed-off-by: Patrik John <patrik.john@u-blox.com> Link: https://lore.kernel.org/r/sig.19614244f8.20211123132737.88341-1-patrik.john@u-blox.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-08serial: 8250_pci: rewrite pericom_do_set_divisor()Jay Dolan
commit bb1201d4b38ec67bd9a871cf86b0cc10f28b15b5 upstream. Have pericom_do_set_divisor() use the uartclk instead of a hard coded value to work with different speed crystals. Tested with 14.7456 and 24 MHz crystals. Have pericom_do_set_divisor() always calculate the divisor rather than call serial8250_do_set_divisor() for rates below baud_base. Do not write registers or call serial8250_do_set_divisor() if valid divisors could not be found. Fixes: 6bf4e42f1d19 ("serial: 8250: Add support for higher baud rates to Pericom chips") Cc: stable <stable@vger.kernel.org> Signed-off-by: Jay Dolan <jay.dolan@accesio.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20211122120604.3909-3-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-08serial: 8250_pci: Fix ACCES entries in pci_serial_quirks arrayJay Dolan
commit c525c5d2437f93520388920baac6d9340c65d239 upstream. Fix error in table for PCI_DEVICE_ID_ACCESIO_PCIE_ICM_4S that caused it and PCI_DEVICE_ID_ACCESIO_PCIE_ICM232_4 to be missing their fourth port. Fixes: 78d3820b9bd3 ("serial: 8250_pci: Have ACCES cards that use the four port Pericom PI7C9X7954 chip use the pci_pericom_setup()") Cc: stable <stable@vger.kernel.org> Signed-off-by: Jay Dolan <jay.dolan@accesio.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20211122120604.3909-2-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-08serial: core: fix transmit-buffer reset and memleakJohan Hovold
commit 00de977f9e0aa9760d9a79d1e41ff780f74e3424 upstream. Commit 761ed4a94582 ("tty: serial_core: convert uart_close to use tty_port_close") converted serial core to use tty_port_close() but failed to notice that the transmit buffer still needs to be freed on final close. Not freeing the transmit buffer means that the buffer is no longer cleared on next open so that any ioctl() waiting for the buffer to drain might wait indefinitely (e.g. on termios changes) or that stale data can end up being transmitted in case tx is restarted. Furthermore, the buffer of any port that has been opened would leak on driver unbind. Note that the port lock is held when clearing the buffer pointer due to the ldisc race worked around by commit a5ba1d95e46e ("uart: fix race between uart_put_char() and uart_shutdown()"). Also note that the tty-port shutdown() callback is not called for console ports so it is not strictly necessary to free the buffer page after releasing the lock (cf. d72402145ace ("tty/serial: do not free trasnmit buffer page under port lock")). Link: https://lore.kernel.org/r/319321886d97c456203d5c6a576a5480d07c3478.1635781688.git.baruch@tkos.co.il Fixes: 761ed4a94582 ("tty: serial_core: convert uart_close to use tty_port_close") Cc: stable@vger.kernel.org # 4.9 Cc: Rob Herring <robh@kernel.org> Reported-by: Baruch Siach <baruch@tkos.co.il> Tested-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20211108085431.12637-1-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-08serial: pl011: Add ACPI SBSA UART match idPierre Gondois
commit ac442a077acf9a6bf1db4320ec0c3f303be092b3 upstream. The document 'ACPI for Arm Components 1.0' defines the following _HID mappings: -'Prime cell UART (PL011)': ARMH0011 -'SBSA UART': ARMHB000 Use the sbsa-uart driver when a device is described with the 'ARMHB000' _HID. Note: PL011 devices currently use the sbsa-uart driver instead of the uart-pl011 driver. Indeed, PL011 devices are not bound to a clock in ACPI. It is not possible to change their baudrate. Cc: <stable@vger.kernel.org> Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com> Link: https://lore.kernel.org/r/20211109172248.19061-1-Pierre.Gondois@arm.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-08tty: serial: msm_serial: Deactivate RX DMA for polling supportSven Eckelmann
commit 7492ffc90fa126afb67d4392d56cb4134780194a upstream. The CONSOLE_POLLING mode is used for tools like k(g)db. In this kind of setup, it is often sharing a serial device with the normal system console. This is usually no problem because the polling helpers can consume input values directly (when in kgdb context) and the normal Linux handlers can only consume new input values after kgdb switched back. This is not true anymore when RX DMA is enabled for UARTDM controllers. Single input values can no longer be received correctly. Instead following seems to happen: * on 1. input, some old input is read (continuously) * on 2. input, two old inputs are read (continuously) * on 3. input, three old input values are read (continuously) * on 4. input, 4 previous inputs are received This repeats then for each group of 4 input values. This behavior changes slightly depending on what state the controller was when the first input was received. But this makes working with kgdb basically impossible because control messages are always corrupted when kgdboc tries to parse them. RX DMA should therefore be off when CONSOLE_POLLING is enabled to avoid these kind of problems. No such problem was noticed for TX DMA. Fixes: 99693945013a ("tty: serial: msm: Add RX DMA support") Cc: stable@vger.kernel.org Signed-off-by: Sven Eckelmann <sven@narfation.org> Link: https://lore.kernel.org/r/20211113121050.7266-1-sven@narfation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-01tty: hvc: replace BUG_ON() with negative return valueJuergen Gross
commit e679004dec37566f658a255157d3aed9d762a2b7 upstream. Xen frontends shouldn't BUG() in case of illegal data received from their backends. So replace the BUG_ON()s when reading illegal data from the ring page with negative return values. This is commit e679004dec37566f upstream. Reviewed-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Juergen Gross <jgross@suse.com> Link: https://lore.kernel.org/r/20210707091045.460-1-jgross@suse.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-11-26tty: tty_buffer: Fix the softlockup issue in flush_to_ldiscGuanghui Feng
[ Upstream commit 3968ddcf05fb4b9409cd1859feb06a5b0550a1c1 ] When running ltp testcase(ltp/testcases/kernel/pty/pty04.c) with arm64, there is a soft lockup, which look like this one: Workqueue: events_unbound flush_to_ldisc Call trace: dump_backtrace+0x0/0x1ec show_stack+0x24/0x30 dump_stack+0xd0/0x128 panic+0x15c/0x374 watchdog_timer_fn+0x2b8/0x304 __run_hrtimer+0x88/0x2c0 __hrtimer_run_queues+0xa4/0x120 hrtimer_interrupt+0xfc/0x270 arch_timer_handler_phys+0x40/0x50 handle_percpu_devid_irq+0x94/0x220 __handle_domain_irq+0x88/0xf0 gic_handle_irq+0x84/0xfc el1_irq+0xc8/0x180 slip_unesc+0x80/0x214 [slip] tty_ldisc_receive_buf+0x64/0x80 tty_port_default_receive_buf+0x50/0x90 flush_to_ldisc+0xbc/0x110 process_one_work+0x1d4/0x4b0 worker_thread+0x180/0x430 kthread+0x11c/0x120 In the testcase pty04, The first process call the write syscall to send data to the pty master. At the same time, the workqueue will do the flush_to_ldisc to pop data in a loop until there is no more data left. When the sender and workqueue running in different core, the sender sends data fastly in full time which will result in workqueue doing work in loop for a long time and occuring softlockup in flush_to_ldisc with kernel configured without preempt. So I add need_resched check and cond_resched in the flush_to_ldisc loop to avoid it. Signed-off-by: Guanghui Feng <guanghuifeng@linux.alibaba.com> Link: https://lore.kernel.org/r/1633961304-24759-1-git-send-email-guanghuifeng@linux.alibaba.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-17serial: xilinx_uartps: Fix race condition causing stuck TXAnssi Hannula
[ Upstream commit 88b20f84f0fe47409342669caf3e58a3fc64c316 ] xilinx_uartps .start_tx() clears TXEMPTY when enabling TXEMPTY to avoid any previous TXEVENT event asserting the UART interrupt. This clear operation is done immediately after filling the TX FIFO. However, if the bytes inserted by cdns_uart_handle_tx() are consumed by the UART before the TXEMPTY is cleared, the clear operation eats the new TXEMPTY event as well, causing cdns_uart_isr() to never receive the TXEMPTY event. If there are bytes still queued in circbuf, TX will get stuck as they will never get transferred to FIFO (unless new bytes are queued to circbuf in which case .start_tx() is called again). While the racy missed TXEMPTY occurs fairly often with short data sequences (e.g. write 1 byte), in those cases circbuf is usually empty so no action on TXEMPTY would have been needed anyway. On the other hand, longer data sequences make the race much more unlikely as UART takes longer to consume the TX FIFO. Therefore it is rare for this race to cause visible issues in general. Fix the race by clearing the TXEMPTY bit in ISR *before* filling the FIFO. The TXEMPTY bit in ISR will only get asserted at the exact moment the TX FIFO *becomes* empty, so clearing the bit before filling FIFO does not cause an extra immediate assertion even if the FIFO is initially empty. This is hard to reproduce directly on a normal system, but inserting e.g. udelay(200) after cdns_uart_handle_tx(port), setting 4000000 baud, and then running "dd if=/dev/zero bs=128 of=/dev/ttyPS0 count=50" reliably reproduces the issue on my ZynqMP test system unless this fix is applied. Fixes: 85baf542d54e ("tty: xuartps: support 64 byte FIFO size") Signed-off-by: Anssi Hannula <anssi.hannula@bitwise.fi> Link: https://lore.kernel.org/r/20211026102741.2910441-1-anssi.hannula@bitwise.fi Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-17serial: 8250_dw: Drop wrong use of ACPI_PTR()Andy Shevchenko
[ Upstream commit ebabb77a2a115b6c5e68f7364b598310b5f61fb2 ] ACPI_PTR() is more harmful than helpful. For example, in this case if CONFIG_ACPI=n, the ID table left unused which is not what we want. Instead of adding ifdeffery here and there, drop ACPI_PTR(). Fixes: 6a7320c4669f ("serial: 8250_dw: Add ACPI 5.0 support") Reported-by: Daniel Palmer <daniel@0x0f.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20211005134516.23218-1-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
generated by cgit v1.2.3 (git 2.0.4) at 2024-05-31 19:35:24 +0000