summaryrefslogtreecommitdiff
path: root/drivers/usb/core/quirks.c
AgeCommit message (Collapse)Author
2018-12-05usb: core: quirks: add RESET_RESUME quirk for Cherry G230 Stream seriesMichael Niewöhner
commit effd14f66cc1ef6701a19c5a56e39c35f4d395a5 upstream. Cherry G230 Stream 2.0 (G85-231) and 3.0 (G85-232) need this quirk to function correctly. This fixes a but where double pressing numlock locks up the device completely with need to replug the keyboard. Signed-off-by: Michael Niewöhner <linux@mniewoehner.de> Tested-by: Michael Niewöhner <linux@mniewoehner.de> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-27usb: quirks: Add delay-init quirk for Corsair K70 LUX RGBEmmanuel Pescosta
commit a77112577667cbda7c6292c52d909636aef31fd9 upstream. Following on from this patch: https://lkml.org/lkml/2017/11/3/516, Corsair K70 LUX RGB keyboards also require the DELAY_INIT quirk to start correctly at boot. Dmesg output: usb 1-6: string descriptor 0 read error: -110 usb 1-6: New USB device found, idVendor=1b1c, idProduct=1b33 usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 1-6: can't set config #1, error -110 Signed-off-by: Emmanuel Pescosta <emmanuelpescosta099@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-27USB: quirks: Add no-lpm quirk for Raydium touchscreensKai-Heng Feng
commit deefd24228a172d1b27d4a9adbfd2cdacd60ae64 upstream. Raydium USB touchscreen fails to set config if LPM is enabled: [ 2.030658] usb 1-8: New USB device found, idVendor=2386, idProduct=3119 [ 2.030659] usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.030660] usb 1-8: Product: Raydium Touch System [ 2.030661] usb 1-8: Manufacturer: Raydium Corporation [ 7.132209] usb 1-8: can't set config #1, error -110 Same behavior can be observed on 2386:3114. Raydium claims the touchscreen supports LPM under Windows, so I used Microsoft USB Test Tools (MUTT) [1] to check its LPM status. MUTT shows that the LPM doesn't work under Windows, either. So let's just disable LPM for Raydium touchscreens. [1] https://docs.microsoft.com/en-us/windows-hardware/drivers/usbcon/usb-test-tools Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-26USB: add quirk for WORLDE Controller KS49 or Prodipe MIDI 49C USB controllerMaxence Duprès
commit 9b83a1c301ad6d24988a128c69b42cbaaf537d82 upstream. WORLDE Controller KS49 or Prodipe MIDI 49C USB controller cause a -EPROTO error, a communication restart and loop again. This issue has already been fixed for KS25. https://lore.kernel.org/patchwork/patch/753077/ I just add device 201 for KS49 in quirks.c to get it works. Signed-off-by: Laurent Roux <xpros64@hotmail.fr> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-26USB: Add quirk to support DJI CineSSDTim Anderson
commit f45681f9becaa65111ed0a691ccf080a0cd5feb8 upstream. This device does not correctly handle the LPM operations. Also, the device cannot handle ATA pass-through commands and locks up when attempted while running in super speed. This patch adds the equivalent quirk logic as found in uas. Signed-off-by: Tim Anderson <tsa@biglakesoftware.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-17usb: quirks: add delay quirks for Corsair StrafeNico Sneck
commit bba57eddadda936c94b5dccf73787cb9e159d0a5 upstream. Corsair Strafe appears to suffer from the same issues as the Corsair Strafe RGB. Apply the same quirks (control message delay and init delay) that the RGB version has to 1b1c:1b15. With these quirks in place the keyboard works correctly upon booting the system, and no longer requires reattaching the device. Signed-off-by: Nico Sneck <snecknico@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-01usb: core: Add quirk for HP v222w 16GB MiniKamil Lulko
commit 3180dabe08e3653bf0a838553905d88f3773f29c upstream. Add DELAY_INIT quirk to fix the following problem with HP v222w 16GB Mini: usb 1-3: unable to read config index 0 descriptor/start: -110 usb 1-3: can't read configurations, error -110 usb 1-3: can't set config #1, error -110 Signed-off-by: Kamil Lulko <kamilx.lulko@intel.com> Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-18usb: quirks: add control message delay for 1b1c:1b20Danilo Krummrich
commit cb88a0588717ba6c756cb5972d75766b273a6817 upstream. Corsair Strafe RGB keyboard does not respond to usb control messages sometimes and hence generates timeouts. Commit de3af5bf259d ("usb: quirks: add delay init quirk for Corsair Strafe RGB keyboard") tried to fix those timeouts by adding USB_QUIRK_DELAY_INIT. Unfortunately, even with this quirk timeouts of usb_control_msg() can still be seen, but with a lower frequency (approx. 1 out of 15): [ 29.103520] usb 1-8: string descriptor 0 read error: -110 [ 34.363097] usb 1-8: can't set config #1, error -110 Adding further delays to different locations where usb control messages are issued just moves the timeouts to other locations, e.g.: [ 35.400533] usbhid 1-8:1.0: can't add hid device: -110 [ 35.401014] usbhid: probe of 1-8:1.0 failed with error -110 The only way to reliably avoid those issues is having a pause after each usb control message. In approx. 200 boot cycles no more timeouts were seen. Addionaly, keep USB_QUIRK_DELAY_INIT as it turned out to be necessary to have the delay in hub_port_connect() after hub_port_init(). The overall boot time seems not to be influenced by these additional delays, even on fast machines and lightweight distributions. Fixes: de3af5bf259d ("usb: quirks: add delay init quirk for Corsair Strafe RGB keyboard") Cc: stable@vger.kernel.org Signed-off-by: Danilo Krummrich <danilokrummrich@dk-develop.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-28Add delay-init quirk for Corsair K70 RGB keyboardsJack Stocker
commit 7a1646d922577b5b48c0d222e03831141664bb59 upstream. Following on from this patch: https://lkml.org/lkml/2017/11/3/516, Corsair K70 RGB keyboards also require the DELAY_INIT quirk to start correctly at boot. Device ids found here: usb 3-3: New USB device found, idVendor=1b1c, idProduct=1b13 usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 3-3: Product: Corsair K70 RGB Gaming Keyboard Signed-off-by: Jack Stocker <jackstocker.93@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-02usb: add RESET_RESUME for ELSA MicroLink 56KOliver Neukum
commit b9096d9f15c142574ebebe8fbb137012bb9d99c2 upstream. This modem needs this quirk to operate. It produces timeouts when resumed without reset. Signed-off-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-02usb: Add device quirk for Logitech HD Pro Webcam C925eDmitry Fleytman Dmitry Fleytman
commit 7f038d256c723dd390d2fca942919573995f4cfd upstream. Commit e0429362ab15 ("usb: Add device quirk for Logitech HD Pro Webcams C920 and C930e") introduced quirk to workaround an issue with some Logitech webcams. There is one more model that has the same issue - C925e, so applying the same quirk as well. See aforementioned commit message for detailed explanation of the problem. Signed-off-by: Dmitry Fleytman <dmitry.fleytman@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-09usb: quirks: Add no-lpm quirk for KY-688 USB 3.1 Type-C HubKai-Heng Feng
commit e43a12f1793ae1fe006e26fe9327a8840a92233c upstream. KY-688 USB 3.1 Type-C Hub internally uses a Genesys Logic hub to connect to Realtek r8153. Similar to commit ("7496cfe5431f2 usb: quirks: Add no-lpm quirk for Moshi USB to Ethernet Adapter"), no-lpm can make r8153 ethernet work. Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-21USB: Add delay-init quirk for Corsair K70 LUX keyboardsBernhard Rosenkraenzer
commit a0fea6027f19c62727315aba1a7fae75a9caa842 upstream. Without this patch, K70 LUX keyboards don't work, saying usb 3-3: unable to read config index 0 descriptor/all usb 3-3: can't read configurations, error -110 usb usb3-port3: unable to enumerate USB device Signed-off-by: Bernhard Rosenkraenzer <Bernhard.Rosenkranzer@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-27usb: quirks: add quirk for WORLDE MINI MIDI keyboardFelipe Balbi
commit 2811501e6d8f5747d08f8e25b9ecf472d0dc4c7d upstream. This keyboard doesn't implement Get String descriptors properly even though string indexes are valid. What happens is that when requesting for the String descriptor, the device disconnects and reconnects. Without this quirk, this loop will continue forever. Cc: Alan Stern <stern@rowland.harvard.edu> Reported-by: Владимир Мартьянов <vilgeforce@gmail.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-09-09usb: Add device quirk for Logitech HD Pro Webcam C920-CDmitry Fleytman
commit a1279ef74eeeb5f627f091c71d80dd7ac766c99d upstream. Commit e0429362ab15 ("usb: Add device quirk for Logitech HD Pro Webcams C920 and C930e") introduced quirk to workaround an issue with some Logitech webcams. Apparently model C920-C has the same issue so applying the same quirk as well. See aforementioned commit message for detailed explanation of the problem. Signed-off-by: Dmitry Fleytman <dmitry@daynix.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-09-09usb: quirks: add delay init quirk for Corsair Strafe RGB keyboardKai-Heng Feng
commit de3af5bf259d7a0bfaac70441c8568ab5998d80c upstream. Corsair Strafe RGB keyboard has trouble to initialize: [ 1.679455] usb 3-6: new full-speed USB device number 4 using xhci_hcd [ 6.871136] usb 3-6: unable to read config index 0 descriptor/all [ 6.871138] usb 3-6: can't read configurations, error -110 [ 6.991019] usb 3-6: new full-speed USB device number 5 using xhci_hcd [ 12.246642] usb 3-6: unable to read config index 0 descriptor/all [ 12.246644] usb 3-6: can't read configurations, error -110 [ 12.366555] usb 3-6: new full-speed USB device number 6 using xhci_hcd [ 17.622145] usb 3-6: unable to read config index 0 descriptor/all [ 17.622147] usb 3-6: can't read configurations, error -110 [ 17.742093] usb 3-6: new full-speed USB device number 7 using xhci_hcd [ 22.997715] usb 3-6: unable to read config index 0 descriptor/all [ 22.997716] usb 3-6: can't read configurations, error -110 Although it may work after several times unpluging/pluging: [ 68.195240] usb 3-6: new full-speed USB device number 11 using xhci_hcd [ 68.337459] usb 3-6: New USB device found, idVendor=1b1c, idProduct=1b20 [ 68.337463] usb 3-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 68.337466] usb 3-6: Product: Corsair STRAFE RGB Gaming Keyboard [ 68.337468] usb 3-6: Manufacturer: Corsair [ 68.337470] usb 3-6: SerialNumber: 0F013021AEB8046755A93ED3F5001941 Tried three quirks: USB_QUIRK_DELAY_INIT, USB_QUIRK_NO_LPM and USB_QUIRK_DEVICE_QUALIFIER, user confirmed that USB_QUIRK_DELAY_INIT alone can workaround this issue. Hence add the quirk for Corsair Strafe RGB. BugLink: https://bugs.launchpad.net/bugs/1678477 Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-16usb:xhci:Add quirk for Certain failing HP keyboard on reset after resumeSandeep Singh
commit e788787ef4f9c24aafefc480a8da5f92b914e5e6 upstream. Certain HP keyboards would keep inputting a character automatically which is the wake-up key after S3 resume On some AMD platforms USB host fails to respond (by holding resume-K) to USB device (an HP keyboard) resume request within 1ms (TURSM) and ensures that resume is signaled for at least 20 ms (TDRSMDN), which is defined in USB 2.0 spec. The result is that the keyboard is out of function. In SNPS USB design, the host responds to the resume request only after system gets back to S0 and the host gets to functional after the internal HW restore operation that is more than 1 second after the initial resume request from the USB device. As a workaround for specific keyboard ID(HP Keyboards), applying port reset after resume when the keyboard is plugged in. Signed-off-by: Sandeep Singh <Sandeep.Singh@amd.com> Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> cc: Nehal Shah <Nehal-bakulchandra.Shah@amd.com> Reviewed-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-16usb: quirks: Add no-lpm quirk for Moshi USB to Ethernet AdapterKai-Heng Feng
commit 7496cfe5431f21da5d27a8388c326397e3f0a5db upstream. Moshi USB to Ethernet Adapter internally uses a Genesys Logic hub to connect to Realtek r8153. The Realtek r8153 ethernet does not work on the internal hub, no-lpm quirk can make it work. Since another r8153 dongle at my hand does not have the issue, so add the quirk to the Genesys Logic hub instead. Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-12Add USB quirk for HVR-950q to avoid intermittent device resetsDevin Heitmueller
commit 6836796de4019944f4ba4c99a360e8250fd2e735 upstream. The USB core and sysfs will attempt to enumerate certain parameters which are unsupported by the au0828 - causing inconsistent behavior and sometimes causing the chip to reset. Avoid making these calls. This problem manifested as intermittent cases where the au8522 would be reset on analog video startup, in particular when starting up ALSA audio streaming in parallel - the sysfs entries created by snd-usb-audio on streaming startup would result in unsupported control messages being sent during tuning which would put the chip into an unknown state. Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-30usb-core: Add LINEAR_FRAME_INTR_BINTERVAL USB quirkSamuel Thibault
commit 3243367b209faed5c320a4e5f9a565ee2a2ba958 upstream. Some USB 2.0 devices erroneously report millisecond values in bInterval. The generic config code manages to catch most of them, but in some cases it's not completely enough. The case at stake here is a USB 2.0 braille device, which wants to announce 10ms and thus sets bInterval to 10, but with the USB 2.0 computation that yields to 64ms. It happens that one can type fast enough to reach this interval and get the device buffers overflown, leading to problematic latencies. The generic config code does not catch this case because the 64ms is considered a sane enough value. This change thus adds a USB_QUIRK_LINEAR_FRAME_INTR_BINTERVAL quirk to mark devices which actually report milliseconds in bInterval, and marks Vario Ultra devices as needing it. Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-09USB: Add quirk for WORLDE easykey.25 MIDI keyboardLukáš Lalinský
commit d9b2997e4a0a874e452df7cdd7de5a54502bd0aa upstream. Add a quirk for WORLDE easykey.25 MIDI keyboard (idVendor=0218, idProduct=0401). The device reports that it has config string descriptor at index 3, but when the system selects the configuration and tries to get the description, it returns a -EPROTO error, the communication restarts and this keeps repeating over and over again. Not requesting the string descriptor makes the device work correctly. Relevant info from Wireshark: [...] CONFIGURATION DESCRIPTOR bLength: 9 bDescriptorType: 0x02 (CONFIGURATION) wTotalLength: 101 bNumInterfaces: 2 bConfigurationValue: 1 iConfiguration: 3 Configuration bmAttributes: 0xc0 SELF-POWERED NO REMOTE-WAKEUP 1... .... = Must be 1: Must be 1 for USB 1.1 and higher .1.. .... = Self-Powered: This device is SELF-POWERED ..0. .... = Remote Wakeup: This device does NOT support remote wakeup bMaxPower: 50 (100mA) [...] 45 0.369104 host 2.38.0 USB 64 GET DESCRIPTOR Request STRING [...] URB setup bmRequestType: 0x80 1... .... = Direction: Device-to-host .00. .... = Type: Standard (0x00) ...0 0000 = Recipient: Device (0x00) bRequest: GET DESCRIPTOR (6) Descriptor Index: 0x03 bDescriptorType: 0x03 Language Id: English (United States) (0x0409) wLength: 255 46 0.369255 2.38.0 host USB 64 GET DESCRIPTOR Response STRING[Malformed Packet] [...] Frame 46: 64 bytes on wire (512 bits), 64 bytes captured (512 bits) on interface 0 USB URB [Source: 2.38.0] [Destination: host] URB id: 0xffff88021f62d480 URB type: URB_COMPLETE ('C') URB transfer type: URB_CONTROL (0x02) Endpoint: 0x80, Direction: IN Device: 38 URB bus id: 2 Device setup request: not relevant ('-') Data: present (0) URB sec: 1484896277 URB usec: 455031 URB status: Protocol error (-EPROTO) (-71) URB length [bytes]: 0 Data length [bytes]: 0 [Request in: 45] [Time from request: 0.000151000 seconds] Unused Setup Header Interval: 0 Start frame: 0 Copy of Transfer Flags: 0x00000200 Number of ISO descriptors: 0 [Malformed Packet: USB] [Expert Info (Error/Malformed): Malformed Packet (Exception occurred)] [Malformed Packet (Exception occurred)] [Severity level: Error] [Group: Malformed] Signed-off-by: Lukáš Lalinský <lukas@oxygene.sk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-07-14usb: quirks: Add no-lpm quirk for ElanJoseph Salisbury
BugLink: http://bugs.launchpad.net/bugs/1498667 As reported in BugLink, this device has an issue with Linux Power Management so adding a quirk. This quirk was reccomended by Alan Stern: http://lkml.iu.edu/hypermail/linux/kernel/1606.2/05590.html Signed-off-by: Joseph Salisbury <joseph.salisbury@canonical.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-01usb: quirks: Add no-lpm quirk for Acer C120 LED ProjectorHans de Goede
The Acer C120 LED Projector is a USB-3 connected pico projector which takes both its power and video data from USB-3. In combination with some hubs this device does not play well with lpm, so disable lpm for it. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-01usb: quirks: Fix sortingHans de Goede
Properly sort all the entries by vendor id. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-12-11USB: add quirk for devices with broken LPMAlan Stern
Some USB device / host controller combinations seem to have problems with Link Power Management. For example, Steinar found that his xHCI controller wouldn't handle bandwidth calculations correctly for two video cards simultaneously when LPM was enabled, even though the bus had plenty of bandwidth available. This patch introduces a new quirk flag for devices that should remain disabled for LPM, and creates quirk entries for Steinar's devices. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-by: Steinar H. Gunderson <sgunderson@bigfoot.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-12-01USB: quirks: Fix another ELAN touchscreenAdrien Vergé
Like other buggy models that had their fixes [1], the touchscreen with id 04f3:21b8 from ELAN Microelectronics needs the device-qualifier quirk. Otherwise, it fails to respond, blocks the boot for a random amount of time and pollutes dmesg with: [ 2887.373196] usb 1-5: new full-speed USB device number 41 using xhci_hcd [ 2889.502000] usb 1-5: unable to read config index 0 descriptor/start: -71 [ 2889.502005] usb 1-5: can't read configurations, error -71 [ 2889.654571] usb 1-5: new full-speed USB device number 42 using xhci_hcd [ 2891.783438] usb 1-5: unable to read config index 0 descriptor/start: -71 [ 2891.783443] usb 1-5: can't read configurations, error -71 [1]: See commits c68929f, 876af5d, d749947, a32c99e and dc703ec. Tested-by: Adrien Vergé <adrienverge@gmail.com> Signed-off-by: Adrien Vergé <adrienverge@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-04usb: Add device quirk for Logitech PTZ camerasVincent Palatin
Add a device quirk for the Logitech PTZ Pro Camera and its sibling the ConferenceCam CC3000e Camera. This fixes the failed camera enumeration on some boot, particularly on machines with fast CPU. Tested by connecting a Logitech PTZ Pro Camera to a machine with a Haswell Core i7-4600U CPU @ 2.10GHz, and doing thousands of reboot cycles while recording the kernel logs and taking camera picture after each boot. Before the patch, more than 7% of the boots show some enumeration transfer failures and in a few of them, the kernel is giving up before actually enumerating the webcam. After the patch, the enumeration has been correct on every reboot. Signed-off-by: Vincent Palatin <vpalatin@chromium.org> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-04USB: Add reset-resume quirk for two Plantronics usb headphones.Yao-Wen Mao
These two headphones need a reset-resume quirk to properly resume to original volume level. Signed-off-by: Yao-Wen Mao <yaowen@google.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-09Added another USB product ID for ELAN touchscreen quirks.Logan Gunthorpe
I've had the same issue as described in commit c68929f75dfcb6354918862b91b5778585de1fa5 Except my touchscreen's ID is ID 04f3:0125 Elan Microelectronics Corp. Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-01-25USB: Add OTG PET device to TPLMacpaul Lin
OTG device shall support this device for allowing compliance automated testing. The modification is derived from Pavankumar and Vijayavardhans' previous work. Signed-off-by: Macpaul Lin <macpaul@gmail.com> Cc: Pavankumar Kondeti <pkondeti@codeaurora.org> Cc: Vijayavardhan Vennapusa <vvreddy@codeaurora.org> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-12-12Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid Pull HID updates from Jiri Kosina: - i2c-hid race condition fix from Jean-Baptiste Maneyrol - Logitech driver now supports vendor-specific HID++ protocol, allowing us to deliver a full multitouch support on wider range of Logitech touchpads. Written by Benjamin Tissoires - MS Surface Pro 3 Type Cover support added by Alan Wu - RMI touchpad support improvements from Andrew Duggan - a lot of updates to Wacom driver from Jason Gerecke and Ping Cheng - various small fixes all over the place * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (56 commits) HID: rmi: The address of query8 must be calculated based on which query registers are present HID: rmi: Check for additional ACM registers appended to F11 data report HID: i2c-hid: prevent buffer overflow in early IRQ HID: logitech-hidpp: disable io in probe error path HID: logitech-hidpp: add boundary check for name retrieval HID: logitech-hidpp: check name retrieval return code HID: logitech-hidpp: do not return the name length HID: wacom: Report input events for each finger on generic devices HID: wacom: Initialize MT slots for generic devices at post_parse_hid HID: wacom: Update maximum X/Y accounding to outbound offset HID: wacom: Add support for DTU-1031X HID: wacom: add defines for new Cintiq and DTU outbound tracking HID: wacom: fix freeze on open when autosuspend is on HID: wacom: re-add accidentally dropped Lenovo PID HID: make hid_report_len as a static inline function in hid.h HID: wacom: Consult the application usage when determining field type HID: wacom: PAD is independent with pen/touch HID: multitouch: Add quirk for VTL touch panels HID: i2c-hid: fix race condition reading reports HID: wacom: Add angular resolution data to some ABS axes ...
2014-11-24usb-quirks: Add reset-resume quirk for MS Wireless Laser Mouse 6000Hans de Goede
This wireless mouse receiver needs a reset-resume quirk to properly come out of reset. BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1165206 Signed-off-by: Hans de Goede <hdegoede@redhat.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-19HID: yet another buggy ELAN touchscreenOliver Neukum
The touchscreen needs the same quirk as the other models. Signed-off-by: Oliver Neukum <oneukum@suse.de> Reported-by: Bryan Poling <poli0048@umn.edu> CC: stable@vger.kernel.org Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-11-03USB: quirks: enable device-qualifier quirk for yet another Elan touchscreenAdel Gadllah
Yet another device affected by this. Tested-by: Kevin Fenzi <kevin@scrye.com> Signed-off-by: Adel Gadllah <adel.gadllah@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-03USB: quirks: enable device-qualifier quirk for another Elan touchscreenAdel Gadllah
Currently this quirk is enabled for the model with the device id 0x0089, it is needed for the 0x009b model, which is found on the Fujitsu Lifebook u904 as well. Signed-off-by: Adel Gadllah <adel.gadllah@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-09-23USB: Add device quirk for ASUS T100 Base Station keyboardLu Baolu
This full-speed USB device generates spurious remote wakeup event as soon as USB_DEVICE_REMOTE_WAKEUP feature is set. As the result, Linux can't enter system suspend and S0ix power saving modes once this keyboard is used. This patch tries to introduce USB_QUIRK_IGNORE_REMOTE_WAKEUP quirk. With this quirk set, wakeup capability will be ignored during device configure. This patch could be back-ported to kernels as old as 2.6.39. Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-09-23USB: quirks: enable device-qualifier quirk for Elan TouchscreenJohan Hovold
Enable device-qualifier quirk for Elan Touchscreen, which often fails to handle requests for the device_descriptor. Note that the device sometimes do respond properly with a Request Error (three times as USB core retries), but usually fails to respond at all. When this happens any further descriptor requests also fails, for example: [ 1528.688934] usb 2-7: new full-speed USB device number 4 using xhci_hcd [ 1530.945588] usb 2-7: unable to read config index 0 descriptor/start: -71 [ 1530.945592] usb 2-7: can't read configurations, error -71 This has been observed repeating for over a minute before eventual successful enumeration. Reported-by: Drew Von Spreecken <drewvs@gmail.com> Reported-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-08-01usb-core bInterval quirkJames P Michels III
This patch adds a usb quirk to support devices with interupt endpoints and bInterval values expressed as microframes. The quirk causes the parse endpoint function to modify the reported bInterval to a standards conforming value. There is currently code in the endpoint parser that checks for bIntervals that are outside of the valid range (1-16 for USB 2+ high speed and super speed interupt endpoints). In this case, the code assumes the bInterval is being reported in 1ms frames. As well, the correction is only applied if the original bInterval value is out of the 1-16 range. With this quirk applied to the device, the bInterval will be accurately adjusted from microframes to an exponent. Signed-off-by: James P Michels III <james.p.michels@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-11USB: add reset resume quirk for usb3503Joonyoung Shim
The usb device will autoresume from choose_wakeup() if it is autosuspended with the wrong wakeup setting, but below errors occur because usb3503 misc driver will switch to standby mode when suspended. As add USB_QUIRK_RESET_RESUME, it can stop setting wrong wakeup from autosuspend_check(). [ 7.734717] usb 1-3: reset high-speed USB device number 3 using exynos-ehci [ 7.854658] usb 1-3: device descriptor read/64, error -71 [ 8.079657] usb 1-3: device descriptor read/64, error -71 [ 8.294664] usb 1-3: reset high-speed USB device number 3 using exynos-ehci [ 8.414658] usb 1-3: device descriptor read/64, error -71 [ 8.639657] usb 1-3: device descriptor read/64, error -71 [ 8.854667] usb 1-3: reset high-speed USB device number 3 using exynos-ehci [ 9.264598] usb 1-3: device not accepting address 3, error -71 [ 9.374655] usb 1-3: reset high-speed USB device number 3 using exynos-ehci [ 9.784601] usb 1-3: device not accepting address 3, error -71 [ 9.784838] usb usb1-port3: device 1-3 not suspended yet Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-07usb: Add device quirk for Logitech HD Pro Webcams C920 and C930eJulius Werner
We've encountered a rare issue when enumerating two Logitech webcams after a reboot that doesn't power cycle the USB ports. They are spewing random data (possibly some leftover UVC buffers) on the second (full-sized) Get Configuration request of the enumeration phase. Since the data is random this can potentially cause all kinds of odd behavior, and since it occasionally happens multiple times (after the kernel issues another reset due to the garbled configuration descriptor), it is not always recoverable. Set the USB_DELAY_INIT quirk that seems to work around the issue. Signed-off-by: Julius Werner <jwerner@chromium.org> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-08Revert "USB: quirks: add touchscreen that is dazzeled by remote wakeup"Oliver Neukum
This reverts commit 614ced91fc6fbb5a1cdd12f0f1b6c9197d9f1350. The units on this was seen were prototypes and the issue is not seen on younger units. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-19Merge 3.12-rc6 into usb-next.Greg Kroah-Hartman
We want those USB fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-16USB: quirks: add touchscreen that is dazzeled by remote wakeupOliver Neukum
The device descriptors are messed up after remote wakeup Signed-off-by: Oliver Neukum <oneukum@suse.de> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-14USB: quirks.c: add one device that cannot deal with suspensionOliver Neukum
The device is not responsive when resumed, unless it is reset. Signed-off-by: Oliver Neukum <oneukum@suse.de> CC: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-26usb: core: usb_amd_resume_quirk() can be staticFengguang Wu
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Acked-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-25usb: core: implement AMD remote wakeup quirkHuang Rui
The following patch is required to resolve remote wake issues with certain devices. Issue description: If the remote wake is issued from the device in a specific timing condition while the system is entering sleep state then it may cause system to auto wake on subsequent sleep cycle. Root cause: Host controller rebroadcasts the Resume signal > 100 µseconds after receiving the original resume event from the device. For proper function, some devices may require the rebroadcast of resume event within the USB spec of 100µS. Workaroud: 1. Filter the AMD platforms with Yangtze chipset, then judge of all the usb devices are mouse or not. And get out the port id which attached a mouse with Pixart controller. 2. Then reset the port which attached issue device during system resume from S3. [Q] Why the special devices are only mice? Would high speed devices such as 3G modem or USB Bluetooth adapter trigger this issue? - Current this sensitivity is only confined to devices that use Pixart controllers. This controller is designed for use with LS mouse devices only. We have not observed any other devices failing. There may be a small risk for other devices also but this patch (reset device in resume phase) will cover the cases if required. [Q] Shouldn’t the resume signal be sent within 100 us for every device? - The Host controller may not send the resume signal within 100us, this our host controller specification change. This is why we require the patch to prevent side effects on certain known devices. [Q] Why would clicking mouse INTENSELY to wake the system up trigger this issue? - This behavior is specific to the devices that use Pixart controller. It is timing dependent on when the resume event is triggered during the sleep state. [Q] Is it a host controller issue or mouse? - It is the host controller behavior during resume that triggers the device incorrect behavior on the next resume. This patch sets USB_QUIRK_RESET_RESUME flag for these Pixart-based mice when they attached to platforms with AMD Yangtze chipset. Signed-off-by: Huang Rui <ray.huang@amd.com> Suggested-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-14usb: add two quirky touchscreenOliver Neukum
These devices tend to become unresponsive after S3 Signed-off-by: Oliver Neukum <oneukum@suse.de> CC: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-05-16USB: reset resume quirk needed by a hubOliver Neukum
Werner Fink has reported problems with this hub. Signed-off-by: Oliver Neukum <oliver@neukum.org> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-29usb: Make USB persist default configurableJulius Werner
Commit 9214d1d8 set the USB persist flag as a default for all devices. This might be desirable for some distributions, but it certainly has its trade-offs... most importantly, it can significantly increase system resume time, because the kernel blocks on resuming (and sometimes resetting) USB devices before it unfreezes userspace. This patch introduces a new config option CONFIG_USB_DEFAULT_PERSIST, which allows distributions to make this decision on their own without the need to carry a custom patch or revert the kernel's setting in userspace. [edited the Kconfig help text a bit - gregkh] Signed-off-by: Julius Werner <jwerner@chromium.org> Cc: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-11USB: Add device quirk for Microsoft VX700 webcamAndreas Fleig
Add device quirk for Microsoft Lifecam VX700 v2.0 webcams. Fixes squeaking noise of the microphone. Signed-off-by: Andreas Fleig <andreasfleig@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.0.4) at 2024-05-29 18:31:04 +0000