summaryrefslogtreecommitdiff
path: root/drivers/usb/serial/ftdi_sio_ids.h
AgeCommit message (Collapse)Author
2011-02-17USB: ftdi_sio: Add VID=0x0647, PID=0x0100 for Acton Research spectrographMichael Williamson
commit 28fe2eb0162a1d23370dd99ff7d0e35632b1ee91 upstream. Add the USB Vendor ID and Product ID for a Acton Research Corp. spectrograph device with a FTDI chip for serial I/O. Signed-off-by: Michael H Williamson <michael.h.williamson@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-17USB: ftdi_sio: add ST Micro Connect Lite uart supportJean-Christophe PLAGNIOL-VILLARD
commit 6ec2f46c4b4abf48c88c0ae7c476f347b97e1105 upstream. on ST Micro Connect Lite we have 4 port Part A and B for the JTAG Port C Uart Port D for PIO Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-17USB: serial: Updated support for ICOM devicesPieter Maes
commit a9d61bc49188e32d2ae9cf0f683cde3e1744feef upstream. I found the original patch on the db0fhn repeater wiki (couldn't find the email of the origial author) I guess it was never commited. I updated and added some Icom HAM-radio devices to the ftdi driver. Added extra comments to make clear what devices it are. Signed-off-by: Pieter Maes <maescool@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-01-07USB: ftdi_sio: Add D.O.Tec PIDFlorian Faber
commit 5363cdc3c5da9bd431552cf5989ab481596f0c6d upstream. Add FTDI PID to identify D.O.Tec devices correctly. Signed-off-by: Florian Faber <faberman@linuxproaudio.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-12-09USB: serial: ftdi_sio: Vardaan USB RS422/485 converter PID addedJacques Viviers
commit 6fdbad8021151a9e93af8159a6232c8f26415c09 upstream. Add the PID for the Vardaan Enterprises VEUSB422R3 USB to RS422/485 converter. It uses the same chip as the FTDI_8U232AM_PID 0x6001. This should also work with the stable branches for: 2.6.31, 2.6.32, 2.6.33, 2.6.34, 2.6.35, 2.6.36 Signed-off-by: Jacques Viviers <jacques.viviers@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-12-09USB: ftdi_sio: Add ID for RT Systems USB-29B radio cableMichael Stuermer
commit 28942bb6a9dd4e2ed793675e515cfb8297ed355b upstream. Another variant of the RT Systems programming cable for ham radios. Signed-off-by: Michael Stuermer <ms@mallorn.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-12-09USB: ftdi_sio: add device IDs for Milkymist One JTAG/serialSebastien Bourdeauducq
commit 7fea0f714ffb3f303d4b66933af2df2f5584c9bf upstream. Add the USB IDs for the Milkymist One FTDI-based JTAG/serial adapter (http://projects.qi-hardware.com/index.php/p/mmone-jtag-serial-cable/) to the ftdi_sio driver and disable the first serial channel (used as JTAG from userspace). Signed-off-by: Sebastien Bourdeauducq <sebastien@milkymist.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-11-22USB: ftdi_sio: add device ids for ScienceScopeGreg Kroah-Hartman
commit 0f266abd70cd83571eca019f764b5f1992da7361 upstream. This adds the requested device ids to the ftdi_sio driver. Reported-by: Ewan Bingham <ewan@auc.co.uk> Cc: Kuba Ober <kuba@mareimbrium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-11-22USB: ftdi_sio: new VID/PIDs for various Papouch devicesDaniel Suchy
commit 59c6ccd9f9aecfa59c99ceba6d4d34b180547a05 upstream. This patch for FTDI USB serial driver ads new VID/PIDs used on various devices manufactured by Papouch (http://www.papouch.com). These devices have their own VID/PID, although they're using standard FTDI chip. In ftdi_sio.c, I also made small cleanup to have declarations for all Papouch devices together. Signed-off-by: Daniel Suchy <danny@danysek.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-11-22USB: add PID for FTDI based OpenDCC hardwareRainer Keller
commit 99c1e4f89d1033444ce4d0c064bd2826e81c3775 upstream. The OpenDCC project is developing a new hardware. This patch adds its PID to the list of known FTDI devices. The PID can be found at http://www.opendcc.de/elektronik/usb/opendcc_usb.html Signed-off-by: Rainer Keller <mail@rainerkeller.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-11-22USB: ftdi_sio: Add PID for accesio productsRich Mattes
commit 3126d8236ca6f68eb8292c6af22c2e59afbeef24 upstream. Adds support for Accesio USB to Serial adapters, which are built around FTDI FT232 UARTs. Tested with the Accesio USB-COM-4SM. Signed-off-by: Rich Mattes <richmattes@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-09-20USB: ftdi_sio: Added custom PIDs for ChamSys productsLuke Lowrey
commit 657373883417b2618023fd4135d251ba06a2c30a upstream. Added the 0xDAF8 to 0xDAFF PID range for ChamSys limited USB interface/wing products Signed-off-by: Luke Lowrey <luke@chamsys.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-26USB: ftdi_sio: add product ID for Lenz LI-USBGalen Seitz
commit ea233f805537f5da16c2b34d85b6c5cf88a0f9aa upstream. Add ftdi product ID for Lenz LI-USB, a model train interface. This was NOT tested against 2.6.35, but a similar patch was tested with the CentOS 2.6.18-194.11.1.el5 kernel. It wasn't clear to me what ordering is being used in ftdi_sio.c, so I inserted the ID after another model train entry(SPROG_II). Signed-off-by: Galen Seitz <galens@seitzassoc.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-26USB: ftdi_sio: Add ID for Ionics PlugComputerMartin Michlmayr
commit 666cc076d284e32d11bfc5ea2fbfc50434cff051 upstream. Add the ID for the Ionics PlugComputer (<http://ionicsplug.com/>). Signed-off-by: Martin Michlmayr <tbm@cyrius.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-13USB: ftdi_sio: device id for Navitatordranch@trinnet.net
commit b6180ef7c99574c3350bbffa2a3a9d675321543d upstream. This patch is to add a US Interface, Inc. "Navigator" USB device. Specifically, it's a HAM Radio USB sound modem that also incorporates three pairs of unique FTDI serial ports. The standard Linux FTDI serial driver will only recognize the first two serial ports of an unknown FDTI derived device and this patch adds in recognition to these specific new IDs. Signed-off-by: David A. Ranch <dranch@trinnet.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-13USB: serial: enabling support for Segway RMP in ftdi_sioJohn G. Rogers
commit afad19648f70c6493193e0a774bd754b7790b4a0 upstream. I have added the ProductID=0xe729 VendorID=FTDI_VID=0x0403 which will enable support for the Segway Robotic Mobility Platform (RMP200) in the ftdi_sio kernel module. Currently, users of the Segway RMP200 must use a RUN+="/sbin/modprobe -q ftdi-sio product=0xe729 vendor=0x0403 in a udev rule to get the ftdi_sio module to handle the usb interface and mount it on /dev/ttyXXX. This is not a good solution because some users will have multiple USB to Serial converters which will use the ftdi_sio module. Signed-off-by: John Rogers <jgrogers@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-02USB: FTDI: Add support for the RT System VX-7 radio programming cableCorey Minyard
commit fcc6cb789c77ffee31710eec64efeb25f2124f7a upstream. RT Systems has put out bunch of ham radio cables based on the FT232RL chip. Each cable type has a unique PID, this adds one for the Yaesu VX-7 radios. Signed-off-by: Corey Minyard <minyard@acm.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-02USB: ftdi_sio: support for Signalyzer tools based on FTDI chipsColin Leitner
commit 77dbd74e16b566e9d5eeb4be18ae3ee7d5902bd3 upstream. ftdi_sio: support for Signalyzer tools based on FTDI chips This patch adds support for the Xverve Signalyzers. Signed-off-by: Colin Leitner <colin.leitner@googlemail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-01USB: serial: ftdi: add CONTEC vendor and product idDaniel Sangorrin
commit dee5658b482e9e2ac7d6205dc876fc11d4008138 upstream. This is a patch to ftdi_sio_ids.h and ftdi_sio.c that adds identifiers for CONTEC USB serial converter. I tested it with the device COM-1(USB)H [akpm@linux-foundation.org: keep the VIDs sorted a bit] Signed-off-by: Daniel Sangorrin <daniel.sangorrin@gmail.com> Cc: Andreas Mohr <andi@lisas.de> Cc: Radek Liboska <liboska@uochb.cas.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-15USB: serial: ftdi: add CONTEC vendor and product idDaniel Sangorrin
commit 46b72d78cb022714c89a9ebc00b9581b550cfca7 upstream. This is a patch to ftdi_sio_ids.h and ftdi_sio.c that adds identifiers for CONTEC USB serial converter. I tested it with the device COM-1(USB)H Signed-off-by: Daniel Sangorrin <daniel.sangorrin@gmail.com> Cc: Andreas Mohr <andi@lisas.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-15USB: add new ftdi_sio device idsMitchell Solomon
commit 9714080d20f2ec4b671a06ce69367d91fa9e227e upstream. PID patch for my products Signed-off-by: Mitchell Solomon <mitchjs@rush2112.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-15USB: ftdi_sio: add device IDs (several ELV, one Mindstorms NXT)Andreas Mohr
commit 65e1ec6751b3eefee6d94161185e78736366126f upstream. - add FTDI device IDs for several ELV devices and NXTCam of Lego Mindstorms NXT - add hopefully helpful new_id comment - remove less helpful "Due to many user requests for multiple ELV devices we enable them by default." comment (we simply add _all_ known devices - an enduser shouldn't have to fiddle with obscure module parameters...). - add myself to DRIVER_AUTHOR The missing NXTCam ID has been found at http://www.unixboard.de/vb3/showthread.php?t=44155 , ELV devices taken from ELV Windows .inf file. Signed-off-by: Andreas Mohr <andi@lisas.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-15USB: ftdi_sio: new device id for papouch AD4USBRadek Liboska
commit a7787e508acb4378d62f4584bae3dd1cd0ba3eac upstream. added new device pid (PAPOUCH_AD4USB_PID) to ftdi_sio.h and ftdi_sio.c AD4USB measuring converter is a 4-input A/D converter which enables the user to measure to four current inputs ranging from 0(4) to 20 mA or voltage between 0 and 10 V. The measured values are then transferred to a superior system in digital form. The AD4USB communicates via USB. Powered is also via USB. datasheet in english is here: http://www.papouch.com/shop/scripts/pdf/ad4usb_en.pdf Signed-off-by: Radek Liboska <liboska@uochb.cas.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-15USB: ftdi_sio: sort PID/VID entries in new ftdi_sio_ids.h headerAndreas Mohr
commit 4e092d110fe931db3878865db185be1c9df3e182 upstream. This is a (almost) sort-only patch to sort FTDI device product ID definitions in new ftdi_sio_ids.h header. Advantage is that new device ID submissions will now have a specific (sorted) position - less future merge conflicts. Compile-tested, based on _current_ mainline git. Minor checkpatch.pl warnings were eliminated whereever it made sense, very minor text changes. Signed-off-by: Andreas Mohr <andi@lisas.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-15USB: ftdi_sio: isolate all device IDs to new ftdi_sio_ids.h headerAndreas Mohr
commit 31844d55800e1b93fe75c4d6188a4a44db2e1bbe upstream. This is a strictly move-only patch to relocate all FTDI device product ID definitions to their own ftdi_sio_ids.h header (following the usual *_ids.h kernel tree convention, too), thus correcting the slightly too messy appearance (crucial driver defines were stuck somewhere in the decaying middle swamp of the huge existing header). Compile-tested, based on latest mainline git. Signed-off-by: Andreas Mohr <andi@lisas.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
generated by cgit v1.2.3 (git 2.0.4) at 2024-05-24 16:01:30 +0000