summaryrefslogtreecommitdiff
path: root/drivers/usb/serial/option.c
AgeCommit message (Collapse)Author
2013-12-20USB: option: support new huawei devicesFangxiaozhi (Franko)
commit 2bf308d7bc5e8cdd69672199f59532f35339133c upstream. Add new supporting declarations to option.c, to support Huawei new devices with new bInterfaceProtocol value. Signed-off-by: fangxiaozhi <huananhu@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-20USB: serial: option: blacklist interface 1 for Huawei E173s-6Gustavo Zacarias
commit 8f173e22abf2258ddfa73f46eadbb6a6c29f1631 upstream. Interface 1 on this device isn't for option to bind to otherwise an oops on usb_wwan with log flooding will happen when accessing the port: tty_release: ttyUSB1: read/write wait queue active! It doesn't seem to respond to QMI if it's added to qmi_wwan so don't add it there - it's likely used by the card reader. Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-11-20USB: add new zte 3g-dongle's pid to option.cRui li
commit 0636fc507a976cdc40f21bdbcce6f0b98ff1dfe9 upstream. Signed-off-by: Rui li <li.rui27@zte.com.cn> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-11-13USB: support new huawei devices in option.cFangxiaozhi (Franko)
commit d544db293a44a2a3b09feab7dbd59668b692de71 upstream. Add new supporting declarations to option.c, to support Huawei new devices with new bInterfaceSubClass value. Signed-off-by: fangxiaozhi <huananhu@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-11-04usb: serial: option: blacklist Olivetti Olicard200Enrico Mioso
commit fd8573f5828873343903215f203f14dc82de397c upstream. Interface 6 of this device speaks QMI as per tests done by us. Credits go to Antonella for providing the hardware. Signed-off-by: Enrico Mioso <mrkiko.rs@gmail.com> Signed-off-by: Antonella Pellizzari <anto.pellizzari83@gmail.com> Tested-by: Dan Williams <dcbw@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-11-04USB: serial: option: add support for Inovia SEW858 deviceGreg Kroah-Hartman
commit f4c19b8e165cff1a6607c21f8809441d61cab7ec upstream. This patch adds the device id for the Inovia SEW858 device to the option driver. Reported-by: Pavel Parkhomenko <ra85551@gmail.com> Tested-by: Pavel Parkhomenko <ra85551@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-13USB: serial: option: Ignore card reader interface on Huawei E1750Michal Malý
commit eb2addd4044b4b2ce77693bde5bc810536dd96ee upstream. Hi, my Huawei 3G modem has an embedded Smart Card reader which causes trouble when the modem is being detected (a bunch of "<warn> (ttyUSBx): open blocked by driver for more than 7 seconds!" in messages.log). This trivial patch corrects the problem for me. The modem identifies itself as "12d1:1406 Huawei Technologies Co., Ltd. E1750" in lsusb although the description on the body says "Model E173u-1" Signed-off-by: Michal Malý <madcatxster@prifuk.cz> Cc: Bjørn Mork <bjorn@mork.no> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-28usb: serial: option: Add ONYX 3G device supportEnrico Mioso
commit 63b5df963f52ccbab6fabedf05b7ac6b465789a4 upstream. This patch adds support for the ONYX 3G device (version 1) from ALFA NETWORK. Signed-off-by: Enrico Mioso <mrkiko.rs@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-28USB: option: add D-Link DWM-152/C1 and DWM-156/C1Alexandr \\\"Sky\\\" Ivanov
commit ca24763588844b14f019ffc45c7df6d9e8f932c5 upstream. Adding support for D-Link DWM-152/C1 and DWM-156/C1 devices. DWM-152/C1: T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 6 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=07d1 ProdID=3e01 Rev= 0.00 S: Product=USB Configuration S: SerialNumber=1234567890ABCDEF C:* #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 4 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms DWM-156/C1: T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 8 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=07d1 ProdID=3e02 Rev= 0.00 S: Product=DataCard Device S: SerialNumber=1234567890ABCDEF C:* #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 4 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: Alexandr Ivanov <alexandr.sky@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-28USB: option: append Petatel NP10T device to GSM modems listDaniil Bolsun
commit c38e83b6cc2adf80e3f091fd92cfbeacc9748347 upstream. This patch was tested on 3.10.1 kernel. Same models of Petatel NP10T modems have different device IDs. Unfortunately they have no additional revision information on a board which may treat them as different devices. Currently I've seen only two NP10T devices with various IDs. Possibly Petatel NP10T list will be appended upon devices with new IDs will appear. Signed-off-by: Daniil Bolsun <dan.bolsun@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-28usb: serial: option.c: remove ONDA MT825UP product ID fromdriverEnrico Mioso
commit 878c69aae986ae97084458c0183a8c0a059865b1 upstream. Some (very few) early devices like mine, where not exposting a proper CDC descriptor. This was fixed with an immediate firmware update from the vendor, and pre-installed on newer devices. So actual devices can be driven by cdc_acm.c + cdc_ether.c. Signed-off-by: Enrico Mioso <mrkiko.rs@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-28usb: serial: option: add Olivetti Olicard 200Dan Williams
commit 4cf76df06ecc852633ed927d91e01c83c33bc331 upstream. Speaks AT on interfaces 5 (command & PPP) and 3 (secondary), other interface protocols are unknown. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-28usb: option: add TP-LINK MA260Bjørn Mork
commit 94190301ffa059c2d127b3a67ec5d161d5c62681 upstream. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-28usb: serial: option: blacklist ONDA MT689DC QMI interfaceEnrico Mioso
commit 3d1a69e726406ab662ab88fa30a3a05ed404334d upstream. Prevent the option driver from binding itself to the QMI/WWAN interface, making it unusable by the proper driver. Signed-off-by: enrico Mioso <mrkiko.rs@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-21USB: option,qcserial: move Novatel Gobi1K IDs to qcserialDan Williams
commit a254810a86aaaac4ac6ba44fa934558b042a17a7 upstream. These devices are all Gobi1K devices (according to the Windows INF files) and should be handled by qcserial instead of option. Their network port is handled by qmi_wwan. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-13USB: option: blacklist network interface on Huawei E1820Bjørn Mork
commit b8a24e6281d37243c06b9497dcbfaa98c1e2ad35 upstream. The mode used by Windows for the Huawei E1820 will use the same ff/ff/ff class codes for both serial and network functions. Reported-by: Graham Inggs <graham.inggs@uct.ac.za> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-07USB: Blacklisted Cinterion's PLxx WWAN InterfaceSchemmel Hans-Christoph
commit 8ff10bdb14a52e3f25d4ce09e0582a8684c1a6db upstream. /drivers/usb/serial/option.c: Blacklisted Cinterion's PLxx WWAN Interface (USB Interface 4), because it will be handled by QMI WWAN driver. Product IDs renamed. Signed-off-by: Hans-Christoph Schemmel <hans-christoph.schemmel@gemalto.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-07USB: option: add device IDs for Dell 5804 (Novatel E371) WWAN cardDan Williams
commit 49c6e370dd6400b84897c4100095089b5c13a061 upstream. A rebranded Novatel E371 for AT&T's LTE bands. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-07usb: option: Add Telewell TW-LTE 4GTeppo Kotilainen
commit 73c042df6e1bc50544842a04b777b36bbe3630e6 upstream. Information from driver description files: diag: VID_19D2&PID_0412&MI_00 nmea: VID_19D2&PID_0412&MI_01 at: VID_19D2&PID_0412&MI_02 modem: VID_19D2&PID_0412&MI_03 net: VID_19D2&PID_0412&MI_04 Signed-off-by: Teppo Kotilainen <qubit303@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-05-07USB: option: add a D-Link DWM-156 variantBjørn Mork
commit a2a2d6c7f93e160b52a4ad0164db1f43f743ae0f upstream. Adding support for a Mediatek based device labelled as D-Link Model: DWM-156, H/W Ver: A7 Also adding two other device IDs found in the Debian(!) packages included on the embedded device driver CD. This is a composite MBIM + serial ports + card reader device: T: Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 14 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2001 ProdID=7d01 Rev= 3.00 S: Manufacturer=D-Link,Inc S: Product=D-Link DWM-156 C:* #Ifs= 7 Cfg#= 1 Atr=a0 MxPwr=500mA A: FirstIf#= 0 IfCount= 2 Cls=02(comm.) Sub=0e Prot=00 I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0e Prot=00 Driver=cdc_mbim E: Ad=88(I) Atr=03(Int.) MxPS= 64 Ivl=125us I: If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim I:* If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=02 Prot=01 Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 64 Ivl=500us E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 6 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-05-07USB: serial: option: Added support Olivetti Olicard 145Filippo Turato
commit d19bf5cedfd7d53854a3bd699c98b467b139833b upstream. This adds PID for Olivetti Olicard 145 in option.c Signed-off-by: Filippo Turato <nnj7585@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-20USB: added support for Cinterion's products AH6 and PLS8Christian Schmiedl
commit 1941138e1c024ecb5bd797d414928d3eb94d8662 upstream. add support for Cinterion's products AH6 and PLS8 by adding Product IDs and USB_DEVICE tuples. Signed-off-by: Christian Schmiedl <christian.schmiedl@gemalto.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-20USB: option: add Huawei E5331Bjørn Mork
commit daec90e7382cbd0e73eb6861109b3da91e5ab1f3 upstream. Another device using CDC ACM with vendor specific protocol to mark serial functions. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-02-28USB: option: add Huawei "ACM" devices using protocol = vendorBjørn Mork
commit 1f3f687722fd9b29a0c2a85b4844e3b2a3585c63 upstream. The USB device descriptor of one identity presented by a few Huawei morphing devices have serial functions with class codes 02/02/ff, indicating CDC ACM with a vendor specific protocol. This combination is often used for MSFT RNDIS functions, and the CDC ACM class driver will therefore ignore such functions. The CDC ACM class driver cannot support functions with only 2 endpoints. The underlying serial functions of these modems are also believed to be the same as for alternate device identities already supported by the option driver. Letting the same driver handle these functions independently of the current identity ensures consistent handling and user experience. There is no need to blacklist these devices in the rndis_host driver. Huawei serial functions will either have only 2 endpoints or a CDC ACM functional descriptor with bmCapabilities != 0, making them correctly ignored as "non RNDIS" by that driver. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-02-28USB: option: add Yota / Megafon M100-1 4g modemBjørn Mork
commit cd565279e51bedee1b2988e84f9b3bef485adeb6 upstream. Interface layout: 00 CD-ROM 01 debug COM port 02 AP control port 03 modem 04 usb-ethernet Bus=01 Lev=02 Prnt=02 Port=01 Cnt=02 Dev#= 4 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=0408 ProdID=ea42 Rev= 0.00 S: Manufacturer=Qualcomm, Incorporated S: Product=Qualcomm CDMA Technologies MSM S: SerialNumber=353568051xxxxxx C:* #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=84(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=86(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-02-28USB: option: add and update Alcatel modemsBjørn Mork
commit f8f0302bbcbd1b14655bef29f6996a2152be559d upstream. Adding three currently unsupported modems based on information from .inf driver files: Diag VID_1BBB&PID_0052&MI_00 AGPS VID_1BBB&PID_0052&MI_01 VOICE VID_1BBB&PID_0052&MI_02 AT VID_1BBB&PID_0052&MI_03 Modem VID_1BBB&PID_0052&MI_05 wwan VID_1BBB&PID_0052&MI_06 Diag VID_1BBB&PID_00B6&MI_00 AT VID_1BBB&PID_00B6&MI_01 Modem VID_1BBB&PID_00B6&MI_02 wwan VID_1BBB&PID_00B6&MI_03 Diag VID_1BBB&PID_00B7&MI_00 AGPS VID_1BBB&PID_00B7&MI_01 VOICE VID_1BBB&PID_00B7&MI_02 AT VID_1BBB&PID_00B7&MI_03 Modem VID_1BBB&PID_00B7&MI_04 wwan VID_1BBB&PID_00B7&MI_05 Updating the blacklist info for the X060S_X200 and X220_X500D, reserving interfaces for a wwan driver, based on wwan VID_1BBB&PID_0000&MI_04 wwan VID_1BBB&PID_0017&MI_06 Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-02-11USB: option: add Changhong CH690Bjørn Mork
commit d4fa681541aa7bf8570d03426dd7ba663a71c467 upstream. New device with 3 serial interfaces: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend) Sub=ff Prot=ff If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend) Sub=ff Prot=ff If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend) Sub=ff Prot=ff If#= 3 Alt= 0 #EPs= 2 Cls=08(stor) Sub=06 Prot=50 Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-02-11USB: option: add support for Telit LE920Daniele Palmas
commit 03eb466f276ceef9dcf023dc5474db02af68aad9 upstream. Add PID and special handling for Telit LE920 Signed-off-by: Daniele Palmas <dnlplm@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-21USB: option: blacklist network interface on ONDA MT8205 4G LTEBjørn Mork
Signed-off-by: Bjørn Mork <bjorn@mork.no> commit 2291dff02e5f8c708a46a7c4c888f2c467e26642 upstream. The driver description files gives these names to the vendor specific functions on this modem: Diag VID_19D2&PID_0265&MI_00 NMEA VID_19D2&PID_0265&MI_01 AT cmd VID_19D2&PID_0265&MI_02 Modem VID_19D2&PID_0265&MI_03 Net VID_19D2&PID_0265&MI_04 Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-21USB: option: add TP-LINK HSUPA Modem MA180Bjørn Mork
commit 99beb2e9687ffd61c92a9875141eabe6f57a71b9 upstream. The driver description files gives these names to the vendor specific functions on this modem: Diagnostics VID_2357&PID_0201&MI_00 NMEA VID_2357&PID_0201&MI_01 Modem VID_2357&PID_0201&MI_03 Networkcard VID_2357&PID_0201&MI_04 Reported-by: Thomas Schäfer <tschaefer@t-online.de> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17USB: option: add Telekom Speedstick LTE IIBjørn Mork
commit 5ec0085440ef8c2cf50002b34d5a504ee12aa2bf upstream. also known as Alcatel One Touch L100V LTE The driver description files gives these names to the vendor specific functions on this modem: Application1: VID_1BBB&PID_011E&MI_00 Application2: VID_1BBB&PID_011E&MI_01 Modem: VID_1BBB&PID_011E&MI_03 Ethernet: VID_1BBB&PID_011E&MI_04 Reported-by: Thomas Schäfer <tschaefer@t-online.de> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17USB: option: Add new MEDIATEK PID supportQuentin.Li
commit 94a85b633829b946eef53fc1825d526312fb856f upstream. In option.c, add some new MEDIATEK PIDs support for MEDIATEK new products. This is a MEDIATEK inc. release patch. Signed-off-by: Quentin.Li <snowmanli88@163.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17USB: option: blacklist network interface on ZTE MF880Bjørn Mork
commit fab38246f318edcd0dcb8fd3852a47cf8938878a upstream. The driver description files gives these names to the vendor specific functions on this modem: diag: VID_19D2&PID_0284&MI_00 nmea: VID_19D2&PID_0284&MI_01 at: VID_19D2&PID_0284&MI_02 mdm: VID_19D2&PID_0284&MI_03 net: VID_19D2&PID_0284&MI_04 Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17USB: option: add Nexpring NP10T terminal idDzianis Kahanovich
commit ad86e58661b38b279b7519d4e49c7a19dc1654bb upstream. Hyundai Petatel Inc. Nexpring NP10T terminal (EV-DO rev.A USB modem) ID Signed-off-by: Denis Kaganovich <mahatma@eu.by> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-12-17USB: option: blacklist network interface on Huawei E173Bjørn Mork
commit f36446cf9bbebaa03a80d95cfeeafbaf68218249 upstream. The Huawei E173 will normally appear as 12d1:1436 in Linux. But the modem has another mode with different device ID and a slightly different set of descriptors. This is the mode used by Windows like this: 3Modem: USB\VID_12D1&PID_140C&MI_00\6&3A1D2012&0&0000 Networkcard: USB\VID_12D1&PID_140C&MI_01\6&3A1D2012&0&0001 Appli.Inter: USB\VID_12D1&PID_140C&MI_02\6&3A1D2012&0&0002 PC UI Inter: USB\VID_12D1&PID_140C&MI_03\6&3A1D2012&0&0003 All interfaces have the same ff/ff/ff class codes in this mode. Blacklisting the network interface to allow it to be picked up by the network driver. Reported-by: Thomas Schäfer <tschaefer@t-online.de> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-12-17USB: add new zte 3g-dongle's pid to option.cli.rui27@zte.com.cn
commit 31b6a1048b7292efff8b5b53ae3d9d29adde385e upstream. Signed-off-by: Rui li <li.rui27@zte.com.cn> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-26USB: option: add Alcatel X220/X500D USB IDsDan Williams
commit c0bc3098871dd9b964f6b45ec1e4d70d87811744 upstream. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-26USB: option: add Novatel E362 and Dell Wireless 5800 USB IDsDan Williams
commit fcb21645f1bd86d2be29baf48aa1b298de52ccc7 upstream. The Dell 5800 appears to be a simple rebrand of the Novatel E362. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-28USB: option: add more ZTE devicesBjørn Mork
commit 4b35f1c52943851b310afb09047bfe991ac8f5ae upstream. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-28USB: option: blacklist net interface on ZTE devicesBjørn Mork
commit 1452df6f1b7e396d89c2a1fdbdc0e0e839f97671 upstream. Based on information from the ZTE Windows drivers. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-07USB: option: blacklist QMI interface on ZTE MF683Bjørn Mork
commit 160c9425ac52cb30502be2d9c5e848cec91bb115 upstream. Interface #5 on ZTE MF683 is a QMI/wwan interface. Signed-off-by: Bjørn Mork <bjorn@mork.no> Cc: Shawn J. Goff <shawn7400@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-02USB: option: replace ZTE K5006-Z entry with vendor class ruleBjørn Mork
commit ba9edaa468869a8cea242a411066b0f490751798 upstream. Fix the ZTE K5006-Z entry so that it actually matches anything commit f1b5c997 USB: option: add ZTE K5006-Z added a device specific entry assuming that the device would use class/subclass/proto == ff/ff/ff like other ZTE devices. It turns out that ZTE has started using vendor specific subclass and protocol codes: T: Bus=01 Lev=01 Prnt=01 Port=03 Cnt=01 Dev#= 4 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=19d2 ProdID=1018 Rev= 0.00 S: Manufacturer=ZTE,Incorporated S: Product=ZTE LTE Technologies MSM S: SerialNumber=MF821Vxxxxxxx C:* #Ifs= 5 Cfg#= 1 Atr=c0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=86 Prot=10 Driver=(none) E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=02 Prot=05 Driver=(none) E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=02 Prot=01 Driver=(none) E: Ad=83(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=06 Prot=00 Driver=qmi_wwan E: Ad=85(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 4 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms We do not have any information on how ZTE intend to use these codes, but let us assume for now that the 3 sets matching serial functions in the K5006-Z always will identify a serial function in a ZTE device. Cc: Thomas Schäfer <tschaefer@t-online.de> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-26USB: option: add ZTE K5006-ZBjørn Mork
commit f1b5c997e68533df1f96dcd3068a231bca495603 upstream. The ZTE (Vodafone) K5006-Z use the following interface layout: 00 DIAG 01 secondary 02 modem 03 networkcard 04 storage Ignoring interface #3 which is handled by the qmi_wwan driver. Signed-off-by: Bjørn Mork <bjorn@mork.no> Cc: Thomas Schäfer <tschaefer@t-online.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-26USB: support the new interfaces of Huawei Data Card devices in option driverfangxiaozhi
commit ee6f827df9107139e8960326e49e1376352ced4d upstream. In this patch, we add new declarations into option.c to support the new interfaces of Huawei Data Card devices. And at the same time, remove the redundant declarations from option.c. Signed-off-by: fangxiaozhi <huananhu@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-09USB: option: add ZTE MF821DBjørn Mork
commit 09110529780890804b22e997ae6b4fe3f0b3b158 upstream. Sold by O2 (telefonica germany) under the name "LTE4G" Tested-by: Thomas Schäfer <tschaefer@t-online.de> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-16USB: option: Add MEDIATEK product idsGaosen Zhang
commit aacef9c561a693341566a6850c451ce3df68cb9a upstream. Signed-off-by: Gaosen Zhang <gaosen.zhang@mediatek.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-16USB: option: add ZTE MF60Bjørn Mork
commit 8e16e33c168a6efd0c9f7fa9dd4c1e1db9a74553 upstream. Switches into a composite device by ejecting the initial driver CD. The four interfaces are: QCDM, AT, QMI/wwan and mass storage. Let this driver manage the two serial interfaces: T: Bus=02 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 28 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=19d2 ProdID=1402 Rev= 0.00 S: Manufacturer=ZTE,Incorporated S: Product=ZTE WCDMA Technologies MSM S: SerialNumber=xxxxx C:* #Ifs= 4 Cfg#= 1 Atr=c0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=83(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 3 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-16USB: option: Add USB ID for Novatel Ovation MC551Forest Bond
commit 065b07e7a14676f4138ce4619d229c0be5a74230 upstream. This device is also known as the Verizon USB551L. Signed-off-by: Forest Bond <forest.bond@rapidrollout.com> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-16USB: option: add id for Cellient MEN-200Dmitry Shmygov
commit 1e2c4e59d2b8797973471b4a287a43eac12a0f40 upstream. Add vendor and product ID to option.c driver for Cellient MEN-200 EVDO Rev.B 450MHz data module. http://cellient.com Signed-off-by: Dmitry Shmygov <shmygov@rambler.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-22USB: option: fix port-data abuseJohan Hovold
commit 4273f9878b0a8271df055e3c8f2e7f08c6a4a2f4 upstream. Commit 8b4c6a3ab596961b78465 ("USB: option: Use generic USB wwan code") moved option port-data allocation to usb_wwan_startup but still cast the port data to the old struct... Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.0.4) at 2024-05-28 04:15:55 +0000