summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2011-10-03bnx2x: add missing break in bnx2x_dcbnl_get_capShmulik Ravid
commit a0babc80eb375aad69dab4687c3b44c47d42f241 upstream. Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-10-03bnx2x: fix hw attention handlingDmitry Kravkov
commit f2eaeb58bf6995a979c413ea0cc73289533feacb upstream. Use register name to initialize attention mask Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-10-03iwlagn: fix dangling scan requestJohannes Berg
commit 6c80c39d9a6986a566c30d797aae37bfb697eea3 upstream. If iwl_scan_initiate() fails for any reason, priv->scan_request and priv->scan_vif are left dangling. This can lead to a crash later when iwl_bg_scan_completed() tries to run a pending scan request. In practice, this seems to be very rare due to the STATUS_SCANNING check earlier. That check, however, is wrong -- it should allow a scan to be queued when a reset/roc scan is going on. When a normal scan is already going on, a new one can't be issued by mac80211, so that code can be removed completely. I introduced this bug when adding off-channel support in commit 266af4c745952e9bebf687dd68af58df553cb59d. Reported-by: Peng Yan <peng.yan@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-10-03iwlegacy: do not use interruptible waitsStanislaw Gruszka
commit 65d0f19e583e80e42b1c67c166bfc4dfdf6ab693 upstream. iwlegacy version of fix: commit effd4d9aece9184f526e6556786a94d335e38b71 Author: Johannes Berg <johannes.berg@intel.com> Date: Thu Sep 15 11:46:52 2011 -0700 iwlagn: do not use interruptible waits Since the dawn of its time, iwlwifi has used interruptible waits to wait for synchronous commands and firmware loading. This leads to "interesting" bugs, because it can't actually handle the interruptions; for example when a command sending is interrupted it will assume the command completed fully, and then leave it pending, which leads to all kinds of trouble when the command finishes later. Since there's no easy way to gracefully deal with interruptions, fix the driver to not use interruptible waits. This at least fixes the error iwlagn 0000:02:00.0: Error: Response NULL in 'REPLY_SCAN_ABORT_CMD' I have seen in P2P testing, but it is likely that there are other errors caused by this. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-10-03rtlwifi: rtl8192cu: Fix unitialized structLarry Finger
commit 831d85471e761e190c3c8979b37540d699ae5812 upstream. Driver rtl8192cu assigns a new struct rtl_tcb_desc object, but fails to clear it. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-10-03iwlegacy: fix command queue timeoutStanislaw Gruszka
commit 2e2a41d6ca07d1b2aa67015c35fd80701c98e867 upstream. iwlegacy version of fix: commit 282cdb325aea4ebbc42ce753b47cc96145eb54bc Author: Johannes Berg <johannes.berg@intel.com> Date: Mon Sep 12 12:09:10 2011 -0700 iwlagn: fix command queue timeout If the command queue is constantly busy, which can happen in P2P, the hangcheck timer will frequently find a command in it and will eventually reset the device because nothing sets the timestamp for this queue when commands are processed. Fix this by setting the timestamp when a command completes. iwlegacy does not support P2P, but this patch fix possible unneeded hardware resets, hence is needed. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-10-03ath9k_hw: Fix Rx DMA stuck for AR9003 chipsRajkumar Manoharan
commit e9f9530bb697f53dd620df290102359a3325bb23 upstream. During the endurance testing, rx frames are not getting DMAd from MAC whereas pcu rx frame counters are getting updated properly. As per systems team input updated the initval to fix rx dma stuck issue. Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-10-03scsi: qla4xxx needs libiscsi.oRandy Dunlap
commit 3538a001ea7db13fa1be2966b71f69d808acff01 upstream. qla4xxx driver needs to be linked with libiscsi.o to fix build errors. This happens when no other drivers that use libiscsi.o are enabled. ERROR: "iscsi_conn_stop" [drivers/scsi/qla4xxx/qla4xxx.ko] undefined! ERROR: "iscsi_conn_get_addr_param" [drivers/scsi/qla4xxx/qla4xxx.ko] undefined! ERROR: "iscsi_session_teardown" [drivers/scsi/qla4xxx/qla4xxx.ko] undefined! ERROR: "iscsi_host_alloc" [drivers/scsi/qla4xxx/qla4xxx.ko] undefined! ERROR: "iscsi_conn_start" [drivers/scsi/qla4xxx/qla4xxx.ko] undefined! ERROR: "iscsi_conn_send_pdu" [drivers/scsi/qla4xxx/qla4xxx.ko] undefined! ERROR: "iscsi_session_get_param" [drivers/scsi/qla4xxx/qla4xxx.ko] undefined! ERROR: "iscsi_conn_get_param" [drivers/scsi/qla4xxx/qla4xxx.ko] undefined! ERROR: "iscsi_set_param" [drivers/scsi/qla4xxx/qla4xxx.ko] undefined! ERROR: "iscsi_session_failure" [drivers/scsi/qla4xxx/qla4xxx.ko] undefined! ERROR: "iscsi_complete_pdu" [drivers/scsi/qla4xxx/qla4xxx.ko] undefined! ERROR: "iscsi_session_setup" [drivers/scsi/qla4xxx/qla4xxx.ko] undefined! ERROR: "iscsi_conn_bind" [drivers/scsi/qla4xxx/qla4xxx.ko] undefined! ERROR: "iscsi_conn_setup" [drivers/scsi/qla4xxx/qla4xxx.ko] undefined! ERROR: "iscsi_itt_to_task" [drivers/scsi/qla4xxx/qla4xxx.ko] undefined! Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-10-03libsas: fix failure to revalidate domain for anything but the first expander ↵Mark Salyzyn
child. commit 24926dadc41cc566e974022b0e66231b82c6375f upstream. In an enclosure model where there are chaining expanders to a large body of storage, it was discovered that libsas, responding to a broadcast event change, would only revalidate the domain of first child expander in the list. The issue is that the pointer value to the discovered source device was used to break out of the loop, rather than the content of the pointer. This still remains non-compliant as the revalidate domain code is supposed to loop through all child expanders, and not stop at the first one it finds that reports a change count. However, the design of this routine does not allow multiple device discoveries and that would be a more complicated set of patches reserved for another day. We are fixing the glaring bug rather than refactoring the code. Signed-off-by: Mark Salyzyn <msalyzyn@us.xyratex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-10-03aacraid: reset should disable MSI interruptVasily Averin
commit d0efab26f89506387a1bde898556660e06d7eb15 upstream. scsi reset on hardware with enabled MSI interrupts generates WARNING message [11027.798722] aacraid: Host adapter abort request (0,0,0,0) [11027.798814] aacraid: Host adapter reset request. SCSI hang ? [11087.762237] aacraid: SCSI bus appears hung [11135.082543] ------------[ cut here ]------------ [11135.082646] WARNING: at drivers/pci/msi.c:658 pci_enable_msi_block+0x251/0x290() Signed-off-by: Vasily Averin <vvs@sw.ru> Acked-by: Mark Salyzyn <mark_salyzyn@us.xyratex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-10-033w-9xxx: fix iommu_iova leakJames Bottomley
commit 96067723e46b0dd24ae7b934085ab4eff4d26a1b upstream. Following reports on the list, it looks like the 3e-9xxx driver will leak dma mappings every time we get a transient queueing error back from the card. This is because it maps the sg list in the routine that sends the command, but doesn't unmap again in the transient failure path (even though the command is sent back to the block layer). Fix by unmapping before returning the status. Reported-by: Chris Boot <bootc@bootc.net> Tested-by: Chris Boot <bootc@bootc.net> Acked-by: Adam Radford <aradford@gmail.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-10-03cxgb3i: convert cdev->l2opt to use rcu to prevent NULL dereferenceNeil Horman
commit e48f129c2f200dde8899f6ea5c6e7173674fc482 upstream. This oops was reported recently: d:mon> e cpu 0xd: Vector: 300 (Data Access) at [c0000000fd4c7120] pc: d00000000076f194: .t3_l2t_get+0x44/0x524 [cxgb3] lr: d000000000b02108: .init_act_open+0x150/0x3d4 [cxgb3i] sp: c0000000fd4c73a0 msr: 8000000000009032 dar: 0 dsisr: 40000000 current = 0xc0000000fd640d40 paca = 0xc00000000054ff80 pid = 5085, comm = iscsid d:mon> t [c0000000fd4c7450] d000000000b02108 .init_act_open+0x150/0x3d4 [cxgb3i] [c0000000fd4c7500] d000000000e45378 .cxgbi_ep_connect+0x784/0x8e8 [libcxgbi] [c0000000fd4c7650] d000000000db33f0 .iscsi_if_rx+0x71c/0xb18 [scsi_transport_iscsi2] [c0000000fd4c7740] c000000000370c9c .netlink_data_ready+0x40/0xa4 [c0000000fd4c77c0] c00000000036f010 .netlink_sendskb+0x4c/0x9c [c0000000fd4c7850] c000000000370c18 .netlink_sendmsg+0x358/0x39c [c0000000fd4c7950] c00000000033be24 .sock_sendmsg+0x114/0x1b8 [c0000000fd4c7b50] c00000000033d208 .sys_sendmsg+0x218/0x2ac [c0000000fd4c7d70] c00000000033f55c .sys_socketcall+0x228/0x27c [c0000000fd4c7e30] c0000000000086a4 syscall_exit+0x0/0x40
2011-10-03firmware loader: allow builtin firmware load even if usermodehelper is disabledLinus Torvalds
commit caca9510ff4e5d842c0589110243d60927836222 upstream. In commit a144c6a6c924 ("PM: Print a warning if firmware is requested when tasks are frozen") we not only printed a warning if somebody tried to load the firmware when tasks are frozen - we also failed the load. But that check was done before the check for built-in firmware, and then when we disallowed usermode helpers during bootup (commit 288d5abec831: "Boot up with usermodehelper disabled"), that actually means that built-in modules can no longer load their firmware even if the firmware is built in too. Which used to work, and some people depended on it for the R100 driver. So move the test for usermodehelper_is_disabled() down, to after checking the built-in firmware. This should fix: https://bugzilla.kernel.org/show_bug.cgi?id=40952 Reported-by: James Cloos <cloos@hjcloos.com> Bisected-by: Elimar Riesebieter <riesebie@lxtec.de> Cc: Michel Dänzer <michel@daenzer.net> Cc: Rafael Wysocki <rjw@sisk.pl> Cc: Greg Kroah-Hartman <gregkh@suse.de> Cc: Valdis Kletnieks <valdis.kletnieks@vt.edu> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Lucas Villa Real <lucasvr@gobolinux.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-10-03hwmon: (ds620) Fix handling of negative temperaturesRoland Stigge
commit cc41d586e8b4d76164fe7731c1c49be6cc5fc7e6 upstream. Signed (negative) temperatures were not handled correctly. Signed-off-by: Roland Stigge <stigge@antcom.de> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-10-03bnx2fc: scsi_dma_unmap() not invoked on IO completionsBhanu Prakash Gollapudi
commit b5a95fe7ef464a67fab6ff870aa740739e788f90 upstream. Do not set io_req->sc_cmd to NULL until bnx2fc_unmap_sg_list() is called to enable it to unmap the DMA mappings. Signed-off-by: Bhanu Prakash Gollapudi <bprakash@broadcom.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-10-03bnx2fc: Fix kernel panic when deleting NPIV portsBhanu Prakash Gollapudi
commit d36b3279e157641c345b12eddb3db78fb42da80f upstream. Deleting NPIV port causes a kernel panic when the NPIV port is in the same zone as the physical port and shares the same LUN. This happens due to the fact that vport destroy and unsolicited ELS are scheduled to run on the same workqueue, and vport destroy destroys the lport and the unsolicited ELS tries to access the invalid lport. This patch fixes this issue by maintaining a list of valid lports and verifying if the lport is valid or not before accessing it. Signed-off-by: Bhanu Prakash Gollapudi <bprakash@broadcom.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-10-03cnic, bnx2: Check iSCSI support early in bnx2_init_one()Michael Chan
commit 7625eb2f2fff7bfae41d3119b472c20b48874895 upstream. Based on earlier patch from Neil Horman <nhorman@tuxdriver.com> If iSCSI is not supported on a bnx2 device, bnx2_cnic_probe() will return NULL and the cnic device will not be visible to bnx2i. This will prevent bnx2i from registering and then unregistering during cnic_start() and cause the warning message: bnx2 0003:01:00.1: eth1: Failed waiting for ULP up call to complete Signed-off-by: Michael Chan <mchan@broadcom.com> Cc: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-10-03cnic: Improve NETDEV_UP event handlingMichael Chan
commit db1d350fcb156b58f66a67680617077bcacfe6fc upstream. During NETDEV_UP, we use symbol_get() to get the net driver's cnic probe function. This sometimes doesn't work if NETDEV_UP happens right after NETDEV_REGISTER and the net driver is still running module init code. As a result, the cnic device may not be discovered. We fix this by probing on all NETDEV events if the device's netif_running state is up. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-10-03cnic: Randomize initial TCP port for iSCSI connectionsEddie Wai
commit 11f23aa8ccd56786f0a6f04211cf59b3fab2ce08 upstream. This reduces the likelihood of port re-use when re-loading the driver. Signed-off-by: Eddie Wai <eddie.wai@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-10-03cnic: Fix race conditions with firmwareMichael Chan
commit 101c40c8cb0d10c30f423805f9f5b7a75956832d upstream. During iSCSI connection terminations, if the target is also terminating at about the same time, the firmware may not complete the driver's request to close or reset the connection. This is fixed by handling other events (instead of the expected completion event) as an indication that the driver's request has been rejected. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-10-03cnic: Fix interrupt logicMichael Chan
commit 93736656138e6d2f39f19c1d68f9ef81cfc9dd66 upstream. We need to keep looping until cnic_get_kcqes() returns 0. cnic_get_kcqes() returns a maximum of 64 entries. If there are more entries in the queue and we don't loop back, the remaining entries may not be serviced for a long time. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-10-03drm/radeon/kms: fix DDIA enable on some rs690 systemsAlex Deucher
commit fdfc61594e6de21c23f955818ef78bcab9bafe40 upstream. DVOOutputControl checks the value of of bios scratch reg 3 on some tables and assumes the encoder is already enabled if the DFP2_ACTIVE bit is set. Clear that bit so the table sets the DDIA enable bit properly. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-10-03usb/host/pci-quirks.c: correct annotation of `ehci_dmi_nohandoff_table'Arnaud Lacombe
commit a7e6401e19aa54924ab11ee548afaad0a55ffdc6 upstream. ehci_bios_handoff() is marked __devinit, `ehci_dmi_nohandoff_table' should be marked __devinitconst, not __initconst. This fixes the following section mismatch: WARNING: vmlinux.o(.devinit.text+0x4f08): Section mismatch in reference from the function ehci_bios_handoff() to the variable .init.rodata:ehci_dmi_nohandoff_table The function __devinit ehci_bios_handoff() references a variable __initconst ehci_dmi_nohandoff_table. If ehci_dmi_nohandoff_table is only used by ehci_bios_handoff then annotate ehci_dmi_nohandoff_table with a matching annotation. Cc: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Arnaud Lacombe <lacombar@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-10-03libiscsi_tcp: fix LLD data allocationMike Christie
commit 74dcd0ec735ba9c5bef254b2f6e53068cf3f9ff0 upstream. Have libiscsi_tcp have upper layers allocate the LLD data along with the iscsi_cls_conn struct, so it is refcounted. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-10-03ahci: RAID-mode SATA patch for Intel Panther Point DeviceIDsSeth Heasley
commit 2cab7a4c5ccf96e0954e767af490ba9aee2c9b6f upstream. This patch adds an additional SATA RAID controller DeviceID for the Intel Panther Point PCH. Signed-off-by: Seth Heasley <seth.heasley@intel.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-10-03isci: fix event-get pointer incrementDan Williams
commit 77cd72a53f6426f81b7f56a862402849ee903bda upstream. Hardware only increments the put pointer on event types >= 4. Do not increment the get pointer for event type 3. Reported-by: Kapil Karkra <kapil.karkra@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-10-03isci: Leave requests alone if already terminating.Jeff Skirvin
commit 39ea2c5b5ffaa344467da53e885cfa4ac0105050 upstream. Instead of immediately completing any request that has a second termination call made on it, wait for the TC done/abort HW event. Signed-off-by: Jeff Skirvin <jeffrey.d.skirvin@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-10-03isci: change sas phy timeouts from 54us to 59usMarcin Tomczak
commit 985af6f70dbb8a33b3af8a7c7df508d924650e37 upstream. Need the following workaround in the driver for interoperability with the older Intel SSD drives and any other SATA drive that may exhibit the same behavior. This is a corner case where SCU speed is limited to either 3G or 1.5G and the drive has a period of DC idle when it switches speed during SATA speed negotiation. Workaround :change PHYTOV[31:24] from 0x36 to 0x3B. Signed-off-by: Marcin Tomczak <marcin.tomczak@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-10-03lpfc 8.3.25: PCI and SR-IOV FixesJames Smart
commit 0a96e9754d6c4a2a31e50ee6c6e36ec13f80bc25 upstream. PCI and SR-IOV Fixes - Call pci_save_state after the pci_restore_state completes. - After calling pci_enable_pcie_error_reporting() and checking the return value for logging messages from rc, reset rc to 0 to it will not later be interpreted for error. - Read PCI config space SR-IOV capability to get the number of VFs supported. - Check for the PF's supported number of VFs before invoking PCI enable sriov API call and log error message that user requested number of VFs is beyond the PF capability if such request is passed in. - Added check for Physical function with Virtual Functions attached. If so, first disable all the VFs before proceeding to device reset. Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-10-03lpfc 8.3.25: Fabric and Target Discovery FixesJames Smart
commit 5248a7498e5f6f3d6d276080466946f82f0ea56a upstream. Fabric and Target Discovery Fixes - Clear FC_VPORT_NEEDS_INIT_VPI flag during completion of REG_VFI mailbox command. - Prevent SLI3 Code from unregistering the physical VPI. - Add an else clause to the code that checks and sets sp->cmn.request_multiple_Nport to clear the bit. - Remove a redundant mbox free. - Modified lpfc_sli4_async_fip_evt to pass in physical VPI toi lpfc_find_vport_by_vpid function. - Modified lpfc_find_vport_by_vpid to translate physical VPI to logical VPI before comparing with vport VPI. Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-10-03lpfc 8.3.25: Adapter Interface fixes and changesJames Smart
commit 7851fe2c7f294d0beccf4c3d6af52e8247b89f00 upstream. Adapter Interface fixes and changes - Modify the macro field from lpfc_init_vpi_vpi to lpfc_init_vfi_vpi - Add the new CQE_CODE_RECEIVE_V1 CQE Code, add code in the driver to handle the new Code the same as the CQE_CODE_RECEIVE code except that there are two new checks for this code that will cause the driver to use the new V1 macros for rq_id and fcf_id. - Fix a bug in lpfc_prep_seq() where the size out of the first CQE was ONLY being used, even though multiple dmabufs make up the sequence, each have their own CQE with potentially different sizes. - Fix bug in lpfc_bsg_ct_unsol_event() where the ulpContext and ulpWord[3] fields of the XMIT_SEQUENCE64_CX IOCB were being calculated incorrectly. - Do physical to logical translation before indexing into the active XRI array. - Populate physical vpi in the iocb data structure. - Put the current accumulated total in each IOCB in the chain as we are walking thru then. The last IOCB in the chain should have the total length of the sequence. Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-10-03lpfc 8.3.25: Miscellaneous Bug fixes and code cleanupJames Smart
commit 88a2cfbb8bf3802ca5a90c7d1567a1e542e6ef0c upstream. Miscellaneous Bug fixes and code cleanup - Fix 16G link speed reporting by adding check for 16G check. - Change the check and enforcement of MAILBOX_EXT_SIZE (2048B) to the check and enforcement of BSG_MBOX_SIZE - sizeof(MAILBOX_t) (3840B). - Instead of waiting for a fixed amount of time after performing firmware reset, the driver shall wait for the Lancer SLIPORT_STATUS register for the readiness of the firmware for bring up. - Add logging to indicate when dynamic parameters are changed. - Add revision and date to the firmware image format. - Use revision instead of rev_name to check firmware image version. - Update temporary offset after memcopy is complete for firmware update. - Consolidated the use of the macros to get rid of duplicated register offset definitions. - Removed the unused second parameter in routine lpfc_bsg_diag_mode_enter() - Enable debugfs when debugfs is enabled. - Update function comments for lpfc_sli4_alloc_xri and lpfc_sli4_init_rpi_hdrs. Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-10-03lpfc 8.3.25: T10 DIF FixesJames Smart
commit 7c56b9fd3b6d2d933075d12abee67ceb7c90d04a upstream. T10 DIF Fixes - Fix the case where the SCSI Host supplies the CRC and driver to controller protection is on. - Only support T10 DIF type 1. LBA always goes in ref tag and app tag is not checked. - Change the format of the sense data passed up to the SCSI layer to match the Descriptor Format Sense Data found in SPC-4 sections 4.5.2.1 and 4.5.2.2. - Fix Slip PDE implementation. - Remove BUG() in else casein lpfc_sc_to_bg_opcodes. Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-10-03TPM: Zero buffer after copying to userspacePeter Huewe
commit 3321c07ae5068568cd61ac9f4ba749006a7185c9 upstream. Since the buffer might contain security related data it might be a good idea to zero the buffer after we have copied it to userspace. This got assigned CVE-2011-1162. Signed-off-by: Rajiv Andrade <srajiv@linux.vnet.ibm.com> Signed-off-by: James Morris <jmorris@namei.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-10-03TPM: Call tpm_transmit with correct sizePeter Huewe
commit 6b07d30aca7e52f2881b8c8c20c8a2cd28e8b3d3 upstream. This patch changes the call of tpm_transmit by supplying the size of the userspace buffer instead of TPM_BUFSIZE. This got assigned CVE-2011-1161. [The first hunk didn't make sense given one could expect way less data than TPM_BUFSIZE, so added tpm_transmit boundary check over bufsiz instead The last parameter of tpm_transmit() reflects the amount of data expected from the device, and not the buffer size being supplied to it. It isn't ideal to parse it directly, so we just set it to the maximum the input buffer can handle and let the userspace API to do such job.] Signed-off-by: Rajiv Andrade <srajiv@linux.vnet.ibm.com> Signed-off-by: James Morris <jmorris@namei.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-10-03zorro: Defer device_register() until all devices have been identifiedGeert Uytterhoeven
commit a7f4d00a82feb5b311f765bf9522bc55bee0684f upstream. As the Amiga Zorro II address space is limited to 8.5 MiB and Zorro devices can contain only one BAR, several Amiga Zorro II expansion boards (mainly graphics cards) contain multiple Zorro devices: a small one for the control registers and one (or more) for the graphics memory. The conversion of cirrusfb to the new driver framework introduced a regression: the driver contains a zorro_driver for the first Zorro device, and uses the (old) zorro_find_device() call to find the second Zorro device. However, as the Zorro core calls device_register() as soon as a Zorro device is identified, it may not have identified the second Zorro device belonging to the same physical Zorro expansion card. Hence cirrusfb could no longer find the second part of the Picasso II graphics card, causing a NULL pointer dereference. Defer the registration of Zorro devices with the driver framework until all Zorro devices have been identified to fix this. Note that the alternative solution (modifying cirrusfb to register a zorro_driver for all Zorro devices belonging to a graphics card, instead of only for the first one, and adding a synchronization mechanism to defer initialization until all have been found), is not an option, as on some cards one device may be optional (e.g. the second bank of 2 MiB of graphics memory on the Picasso IV in Zorro II mode). Reported-by: Ingo Jürgensmann <ij@2011.bluespice.org> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-10-03Revert "sfc: Use write-combining to reduce TX latency" and follow-upsBen Hutchings
[ Upstream commit 86c432ca5d6da90a26ac8d3e680f2268b502d9c5 ] This reverts commits 65f0b417dee94f779ce9b77102b7d73c93723b39, d88d6b05fee3cc78e5b0273eb58c31201dcc6b76, fcfa060468a4edcf776f0c1211d826d5de1668c1, 747df2258b1b9a2e25929ef496262c339c380009 and 867955f5682f7157fdafe8670804b9f8ea077bc7. Depending on the processor model, write-combining may result in reordering that the NIC will not tolerate. This typically results in a DMA error event and reset by the driver, logged as: sfc 0000:0e:00.0: eth2: TX DMA Q reports TX_EV_PKT_ERR. sfc 0000:0e:00.0: eth2: resetting (ALL) Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-10-03mpt2sas: Adding support for customer specific brandingKashyap, Desai
commit ab3e5f60d1fc8fe725d02510ff820ff207a8dbef upstream. Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-10-03mpt2sas: Added DID_NO_CONNECT return when driver remove and avoid shutdown callKashyap, Desai
commit 7821578caa8cb831868989041112ab808029ca65 upstream. Driver should not call shutdown call from _scsih_remove otherwise, The scsi midlayer can be deadlocked when devices are removed from the driver pci_driver->shutdown handler. Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-10-03fcoe: Unable to select the exchangeID from offload pool for storage targetsKiran Patil
commit 1ff9918b625457ce20d450d00f9ed0a12ba191b7 upstream. Problem: When initiator sends write command to target, target tries to assign new sequence. It allocates new exchangeID (RX_ID) always from non-offloaded pool (Non-offload EMA) Fix: Enhanced fcoe_oem_match routine to look at F_CTL flags and if it is exchange responder and command type is WRITEDATA, then function returns TRUE instead of FALSE. This function is used to determine which pool to use (offload pool of exchange is used only if this function returns TRUE). Technical Notes: N/A Signed-off-by: Kiran Patil <kiran.patil@intel.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-10-03libfc: Enhancement to RPORT state machine applicable only for VN2VN modeKiran Patil
commit 480584818a4bb3655d8d0d875ed60b427fc61cc5 upstream. Problem: Existing RPORT state machine continues witg FLOGI/PLOGI process only after it receices beacon from other end. Once claiming stage is over (either clain notify or clain repose), beacon is sent and state machine enters into operational mode where it initiates the rlogin process (FLOGI/PLOGI) to the peer but before this rlogin is initiated, exitsing implementation checks if it received beacon from other end, it beacon is not received yet, rlogin process is not initiated. Other end initiates FLOGI but peer end keeps on rejecting FLOGI, hence after 3 retries other end deletes associated rport, then sends a beacon. Once the beacon is received, peer end now initiates rlogin to the peer end but since associated rport is deleted FLOGI is neither accepted nor the reject response send out because rport is deleted. Hence unable to proceed withg FLOGI/PLOGI process and fails to establish VN2VN connection. Fix: VN2VN spec is not standard yet but based on exitsing collateral on T11, it appears that, both end shall send beacon and enter into 'operational mode' without explictly waiting for beacon from other end. Fix is to allow the RPORT login process as long as respective RPORT is created (as part of claim notification / claim response) even though state of RPORT is INIT. Means don't wait for beacon from peer end, if peer end initiates FLOGI (means peer end exist and responding). Notes: This patch is preparing the FCoE stack for target wrt offload. This is generic patch and harmless even if applied on storage initiator because 'else if' condition of function 'fcoe_oem_found' shall evaluate to TRUE only for targets. Dependencies: None Signed-off-by: Kiran Patil <kiran.patil@intel.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-10-03cdc_ncm: fix endianness problem.Giuseppe Scrivano
commit 36c35416a94f5632c3addad05217ff02c39b3b61 upstream. Fix a misusage of the struct usb_cdc_notification to pass arguments to the usb_control_msg function. The usb_control_msg function expects host endian arguments but usb_cdc_notification stores these values as little endian. Now usb_control_msg is directly invoked with host endian values. Signed-off-by: Giuseppe Scrivano <giuseppe@southpole.se> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-10-03ASIX: Add AX88772B USB IDMarek Vasut
commit 308859097831831a979f2e82cbeef0a94f438080 upstream. This device can be found in Acer Iconia TAB W500 tablet dock. Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-10-03USB: PL2303: correctly handle baudrates above 115200Michal Sroczynski
commit 8d48fdf689fed2c73c493e5146d1463689246442 upstream. PL2303: correctly handle baudrates above 115200 Signed-off-by: Michal Sroczynski <msroczyn@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-10-03ehci: add pci quirk for Ordissimo and RM Slate 100 tooAnisse Astier
commit 0c42a4e84502533ec40544324debe2a62836ae11 upstream. Add another variant of the Pegatron tablet used by Ordissimo, and apparently RM Slate 100, to the list of models that should skip the negociation for the handoff of the EHCI controller. Signed-off-by: Anisse Astier <anisse@astier.eu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-10-03ehci: refactor pci quirk to use standard dmi_check_system methodAnisse Astier
commit 03c75362181b0b1d6a330e7cf8def10ba988dfbe upstream. In commit 3610ea5397b80822e417aaa0e706fd803fb05680 (ehci: workaround for pci quirk timeout on ExoPC), a workaround was added to skip the negociation for the handoff of the EHCI controller. Refactor the DMI detection code to use standard dmi_check_system function. Signed-off-by: Anisse Astier <anisse@astier.eu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-10-03tg3: Fix int selftest for recent devices.Matt Carlson
commit 3aa1cdf87c0b3f2345e75c474acc32ebbf0a4724 upstream. This patch fixes interrupt selftest failures for recent devices (57765, 5717, 5718. 5719, 5720) by disabling MSI one-shot mode and applying the status tag workaround to the selftest code. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-10-03tg3: Add 5719 and 5720 to EEE_CAP listMatt Carlson
commit 5baa5e9aa28baccd2a1227095c25bb3e999f250d upstream. This patch adds the 5719 and the 5720 to the list of devices that are EEE capable. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-10-03qdio: clear shared DSCI before scheduling the queue handlerJan Glauber
commit b02f0c2ea25781e0f94b4fc8f6f85582057857b3 upstream. The following race can occur with qdio devices that use the shared device state change indicator: Device (Shared DSCI) CPU0 CPU1 =============================================================================== 1. DSCI 0 => 1, INT pending 2. Thinint handler * si_used = 1 * Inbound tasklet_schedule * DSCI 1 => 0 3. DSCI 0 => 1, INT pending 4. Thinint handler * si_used = 1 * Inbound tasklet_schedu le => NOP 5. Inbound tasklet run 6. DSCI = 1, INT surpressed 7. DSCI 1 => 0 The race would lead to a stall where new data in the input queue is not recognized so the device stops working in case of no further traffic. Fix the race by resetting the DSCI before scheduling the inbound tasklet so the device generates an interrupt if new data arrives in the above scenario in step 6. Reviewed-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-10-03tg3: Fix io failures after chip resetMatt Carlson
commit 9e975cc291d80d5e4562d6bed15ec171e896d69b upstream. Commit f2096f94b514d88593355995d5dd276961e88af1, entitled "tg3: Add 5720 H2BMC support", needed to add code to preserve some bits set by firmware. Unfortunately the new code causes throughput to stop after a chip reset because it enables state machines before they are ready. This patch undoes the problematic code. The bits will be restored later in the init sequence. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
generated by cgit v1.2.3 (git 2.0.4) at 2024-05-29 20:00:34 +0000