summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Expand)Author
2012-03-01mmc: mmci: implement pre_req() and post_req()Per Forlin
2012-03-01mmc: omap_hsmmc: add support for pre_req and post_reqPer Forlin
2012-03-01mmc: core: add non-blocking mmc request functionPer Forlin
2012-02-29ENGR00175692-03 [MX6DL] SD3.0: can not recognize SD3.0 cards on some boards.Ryan QIAN
2012-02-29ENGR00175692-01 [MX6DL] SD3.0: can not recognize SD3.0 cards on some boards.Ryan QIAN
2012-02-29ENGR00174839 i.mx: asrc: enable clock before access the asrc registerJason Liu
2012-02-28ENGR00175219-3 wm8958: add audio codec supportGary Zhang
2012-02-28ENGR00175205 camera: change sensor_clock as an indepent moduleYuxi Sun
2012-02-24ENGR00175321 [MX6]MMCSD: eMMC4.4 failed to work after resumeRyan QIAN
2012-02-24ENGR00175305:gpu-viv:don't open 2d clock when operate only on 3dWu Guoxing
2012-02-23ENGR00175222-2 IPUv3 fb:Check mem resource start addressLiu Ying
2012-02-23ENGR00175221-02 [MX6] MMCSD: clear EXE_TUNE bit after tuning finishes.Ryan QIAN
2012-02-23ENGR00175221-01 [MX6] MMCSD: clear EXE_TUNE bit after tuning finishes.Ryan QIAN
2012-02-22ENGR00174914 MX6x HDMI implement HDMI driver suspend/resume functionSandor Yu
2012-02-22ENGR00174734-2 usb: fix bugs that dp and dm are floating at device modePeter Chen
2012-02-22ENGR00174916 MX6x, console output hang 20 seconds when system bootupSandor Yu
2012-02-22ENGR00174911 MX6x Setting HDMI default mode according bootload cmdlineSandor Yu
2012-02-22ENGR00175080 [MX6] MMC: kernel failed to init eMMC card, after boot from eMMCRyan QIAN
2012-02-21ENGR00174904 VPU: change spinlock to mutexSammy He
2012-02-21ENGR00174654 Update gpu kernel driver to vivante 4.6.5 releaseb02279
2012-02-21ENGR00174899: mx6/dl:gpu2d:fix gc320 can not run at high core clock issueWu Guoxing
2012-02-21ENGR00174892 [MX6]MMC: support SD3.0 UHS-I DDR50 mode.Ryan QIAN
2012-02-20ENGR00174829-2 power: max8903_charger: fix build warrning.Zhang Jiejing
2012-02-20ENGR00174634 MIPI DSI: Add MIPI LCD ID detect and disable clock when no panel.Wayne Zou
2012-02-17ENGR00173964 make hdmi audio init dependent on hdmi video initAlan Tull
2012-02-17ENGR00174747 ASRC:fix spinlock bugChen Liangjun
2012-02-17ENGR00174732 ASRC:close core clock if ASRC idleChen Liangjun
2012-02-15ENGR00174106-3 - EPDC fb: Support EPDC v2.0Danny Nold
2012-02-14ENGR00174299-1: driver part: Add ePxP v2 DMAENGINE driverRobby Cai
2012-02-14ENGR00174399 ASRC: fix mmap fail bugChen Liangjun
2012-02-14ENGR00174395 V4L2 capture: Driver improvementLiu Ying
2012-02-14ENGR00174121-1 power: max8903 add support for dcm always high.Zhang Jiejing
2012-02-14ENGR00174296 [MX6_SD]USDHC: iNAND on board failed to work on ddr modeRyan QIAN
2012-02-14ENGR00174323 vpu: Fix system hang issue of multi-instances processingSammy He
2012-02-13ENGR00174243 MIPI_DSI: mipi dsi panel enable should be after IPU initWayne Zou
2012-02-13ENGR00174310 [MX6Q]USDHC: DDR50 mode for SD3.0 is not supported yetRyan QIAN
2012-02-13ENGR00174311: [MX6Q]USDHC: SD3.0 card failed to workRyan QIAN
2012-02-13ENGR00174307 [mx6 mmc]fix build warningTony Lin
2012-02-13ENGR00174295-02:[MX6]USDHC: ddr mode is masked on slots with no 1.8v support.Ryan QIAN
2012-02-13ENGR00174295-01 Revert "ENGR173939 Skip sending S18R on slots with no 1.8V"Ryan QIAN
2012-02-13ENGR00174242 usb: device: Improve discharge dp operationPeter Chen
2012-02-10ENGR00174212 isl29023: fix build error of isl29023 light sensorXinyu Chen
2012-02-10ENGR00174127 mag3110: merge the mag3110 sensor driverXinyu Chen
2012-02-10ENGR00174024 mma8451: update 3-axis accelerometer driverXinyu Chen
2012-02-10ENGR00174033-2 MX6 PCIE: add pcie RC driverRichard Zhu
2012-02-10ENGR00174128-1 Revert "Remove the discharge for VBUS and DP-1"Peter Chen
2012-02-09ENGR00174124: Revert "[USB Host]change the default wakeup value of RH"Peter Chen
2012-02-09ENGR00174037-2 Add HSIC suspend/resume featureTony LIU
2012-02-08ENGR00172342-2 EDID parse audio data blocksAlan Tull
2012-02-08ENGR00171353 MIPI_DSI: mipi display blank and unblank fail fixedWayne Zou