summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2012-05-25arm: tegra: ahci/sata: Add SATA driverYen Lin
Upgrade the Tegra 3 SATA driver to support kernel 3.1. The driver supports runtime_pm when doing power-gating during idle. A new CONFIG_TEGRA_SATA_IDLE_POWERGATE is provided to enable/disable power-gating during idle. When sata clocks (sata, sata-oob and pll_e clocks) are in the core_dvfs_table[] table, CONFIG_TEGRA_SATA_IDLE_POWERGATE must not be enabled. Currently, sata clocks are in the core_dvfs_table[]. Those clocks will not be in that table in the future. By then, CONFIG_TEGRA_SATA_IDLE_POWERGATE can then be enabled. Change-Id: I15b585713bfd891f8827fd028b21bf3e5c2b80d9 Signed-off-by: Yen Lin <yelin@nvidia.com> (cherry picked from commit b2f19ec92974fd45680300c6f2d8896afa96156d) Reviewed-on: http://git-master/r/104798 GVS: Gerrit_Virtual_Submit Reviewed-by: Winnie Hsu <whsu@nvidia.com>
2012-05-23video: tegra: dc: Open-up HDMI mode filterShashank Sharma
We support dynamic pixel-clock setting now, so open HDMI mode filter by not rejecting a mode due to pixel clock mismatch. If the mode's requested pixclock is within the suppoted range, check few constraints of hardware and allow it. Add aspect ratio check to reject modes with awkward aspect ratio. Bug 967458 Signed-off-by: Shashank Sharma <shashanks@nvidia.com> Change-Id: Ife474dbfe4137a000a4a43b0e1ff72847f2a8b0a (cherry picked from commit ea14570cd39378a6098022e65d88410d618fa73f) Reviewed-on: http://git-master/r/103100 Reviewed-by: Matthew Pedro <mapedro@nvidia.com> Tested-by: Matthew Pedro <mapedro@nvidia.com>
2012-05-22video: tegra: dc: Set default videomodeShashank Sharma
Set default videomode during the dc probe. This patch enables HDMI during the probe only and fixes following issues: 1. Until Xinit there was no display on HDMI. 2. Framebuffer console on HDMI needs it to be enabled well before Xinit. To avoide un-necessary powering on HDMI,Check HPD and enable HDMI only if it's present. Bug: 930136 Bug: 977705 Change-Id: Ifb71328e5df0ccbb5751669db71fd24719fe3738 Signed-off-by: Shashank Sharma <shashanks@nvidia.com> Reviewed-on: http://git-master/r/100656 (cherry picked from commit dfd813141283891e397d73958aabad38eddfe350) Reviewed-on: http://git-master/r/103630 GVS: Gerrit_Virtual_Submit Reviewed-by: Matthew Pedro <mapedro@nvidia.com>
2012-05-21video: tegra: fb: Call mode filter from check varShashank Sharma
Call dc_hdmi_mode_filter to validate a videomode. X prepares its own modedb of supported HDMI modes, but all of them may not be supported from the HDMI driver. This call makes sure a X-mode is listed only if supported in DC driver. Bug: 959676 Change-Id: I8aff65f4e08fcc4471af096150e3972b5913a95a Signed-off-by: Shashank Sharma <shashanks@nvidia.com> Reviewed-on: http://git-master/r/103067 GVS: Gerrit_Virtual_Submit Reviewed-by: Winnie Hsu <whsu@nvidia.com>
2012-05-18media: video: tegra: add GPL v2 MODULE_LICENSEEric Brower
Add MODULE_LICENSE to modules that do not advertise a license, and therefore taint the kernel. Bug 979176 Change-Id: I1abbfa9ca1535b39e70d8bf7aa975e2663a6e45d Signed-off-by: Eric Brower <ebrower@nvidia.com> Reviewed-on: http://git-master/r/102869 GVS: Gerrit_Virtual_Submit Reviewed-by: Matthew Pedro <mapedro@nvidia.com>
2012-05-18Revert "video: tegra: dc: Set default videomode"Hunk Lin
This reverts commit 9349cedf17f9b3c10760c8d48f831473f87a3a15. It is reviewed on http://git-master/r/99635 It will cause HDMI power ON and emc clock bump up to 667Mhz after resume from LP0. bug 930136 Change-Id: I130494fdb381b3d322ac0e3fc8be2e44f2c2d7a7 Signed-off-by: Hunk Lin <hulin@nvidia.com> Reviewed-on: http://git-master/r/103092 GVS: Gerrit_Virtual_Submit Tested-by: Shashank Sharma <shashanks@nvidia.com> Reviewed-by: Matthew Pedro <mapedro@nvidia.com>
2012-05-17usb: ehci: tegra: Split resume & suspend call appropriatelyPreetham Chandru
tegra_ehci_suspend_noirq/tegra_ehci_resume_noirq breaks the modem suspend call as it does a regulator_disable()/regulator_enable call which in turn requires the irqs to be enabled. Hence maintain a normal suspend call i.e with irqs enabled but split the resume to normal resume and noirq resume. Spliting the resume in this way takes care of the below erros in lp0/lp1 "tegra-ehci tegra-ehci.2:fatal error" "tegra-ehci tegra-ehci.2: HC died; cleaning up" Originally resume_noirq & suspend_noirq were added to avoid the above errors but since it breaks the modem suspend call splitting the suspend and resume in this way Bug 954564 Signed-off-by: Preetham Chandru R <pchandru@nvidia.com> Change-Id: I630b3dbe2ca66d194857dc71ababa3e5955785b1 Reviewed-on: http://git-master/r/99100 (cherry picked from commit 4c5a8859490c249ce8a7310f04053d5a4741833f) Reviewed-on: http://git-master/r/102825 GVS: Gerrit_Virtual_Submit Reviewed-by: Matthew Pedro <mapedro@nvidia.com>
2012-05-16mmc: host: loglevel of a message to KERN_INFORamalingam C
Some boards don't have a vddio regulator for few rails hence not getting the regulator handle. And we assume that those rails are always powered. Hence rephrased the error message and lowered the loglevel to KERN_INFO. Bug 976177 Change-Id: I92b82f75934eaf7137584a625065e3389b6ae1b7 Signed-off-by: Ramalingam C <ramalingamc@nvidia.com> Reviewed-on: http://git-master/r/100490 (cherry picked from commit 94e4c7d5f745f9fd4471796a5321f87508daba7c) Reviewed-on: http://git-master/r/102753 GVS: Gerrit_Virtual_Submit Reviewed-by: Matthew Pedro <mapedro@nvidia.com>
2012-05-16rtc: tps6591x: Enable alarm interrupt for RTC_WKALM_SET ioctlPreetham Chandru
RTC_WKALM_SET ioctl should do two things: 1. Set alarm value 2. Enable alarm irq In the current implementation for RTC_WKALM_SET ioctl we are only setting the alarm value but not enabling the alarm irq and hence the system is not waking from lp0 state once the set alarm value expiries. For RTC_WKALM_SET ioctl, alarm->enabled will be set to one from userspace. So based on this condition we can differentiate between RTC_WKALM_SET & RTC_ALM_SET and accordingly enable alarm irq. Bug 978205 Signed-off-by: Preetham Chandru R <pchandru@nvidia.com> Change-Id: Ia35192e691ca116b13093f52873020f67c5c2f8d Reviewed-on: http://git-master/r/101447 (cherry picked from commit d03e84c4d981d65d7b7e68322ce02157c7e7a6c7) Reviewed-on: http://git-master/r/102752 GVS: Gerrit_Virtual_Submit Reviewed-by: Matthew Pedro <mapedro@nvidia.com>
2012-05-14usb: gadget: udc-core: fix kernel crash on soft_connect and srp interfacesPreetham Chandru
We should not call dev_get_drvdata() as the driver data is never set. We should use container_of() as it is been used for other sysfs attributes. Without this change writing to the soft_connect or srp interfaces crashes the kernel because of null pointer dereference. Bug 975473 Signed-off-by: Preeham Chandru R <pchandru@nvidia.com> Change-Id: I45f6dab32f5435d518bd5b4fcdfafa54b9b89acd Reviewed-on: http://git-master/r/100238 (cherry picked from commit 446b1ef096686dade535c7316e536d3d743c0331) Reviewed-on: http://git-master/r/101997 Tested-by: Preetham Chandru <pchandru@nvidia.com> GVS: Gerrit_Virtual_Submit Reviewed-by: Matthew Pedro <mapedro@nvidia.com>
2012-05-02net: wireless: sd8797: change wlan interface to wlan0Narayan Reddy
Change wlan interface from mlan to wlan. Bug 954218 Change-Id: I5b2b2840a4830eda908a47cc0fc59d0479a1df34 Signed-off-by: Narayan Reddy <narayanr@nvidia.com> Reviewed-on: http://git-master/r/98997 Reviewed-by: Automatic_Commit_Validation_User Reviewed-by: Bharat Nihalani <bnihalani@nvidia.com> Reviewed-by: Rakesh Kumar <krakesh@nvidia.com>
2012-05-02mmc: host: Disable SDIO card clock when idle for Tegra 3 onlyMursalin Akon
The CL disables SDIO card clock when idle for Tegra 3 only. Bonus: conditional build for some tegra 3 functionalities. Bug 975541 Change-Id: I097c4771f3565bf9137d7854ada10c1fe8535056 Signed-off-by: Mursalin Akon <makon@nvidia.com> Reviewed-on: http://git-master/r/99707 Reviewed-by: Automatic_Commit_Validation_User Reviewed-by: Allen Martin <amartin@nvidia.com> Reviewed-by: Peer Chen <pchen@nvidia.com>
2012-05-02video: tegra: fb: Enable window state while panShashank Sharma
Set window enabled flag in pan display. This fixes a blank window display while switching console from dc_ext device to framebuffer device, and allows dc_ext and fbdev to co-exist. Removed previous work around to unblank fb from tegra_dc_blank function. Bug: 970263 Bug: 963480 Change-Id: I9853da211f78815246965d240d1717345c5ab391 Signed-off-by: Shashank Sharma <shashanks@nvidia.com> Reviewed-on: http://git-master/r/99422 Reviewed-by: Automatic_Commit_Validation_User Reviewed-by: Jon Mayo <jmayo@nvidia.com> Reviewed-by: Kiran Adduri <kadduri@nvidia.com> Reviewed-by: Allen Martin <amartin@nvidia.com>
2012-05-01video: tegra: dc: Set default videomodeShashank Sharma
Set default videomode during the dc probe. This patch enables HDMI during the probe only and fixes following issues: 1. Until Xinit there was no display on HDMI. 2. Framebuffer console on HDMI needs it to be enabled well before Xinit. Bug: 930136 Change-Id: Ieaf5c69eefa4a6584893425ad4fd772bcd91ea11 Signed-off-by: Shashank Sharma <shashanks@nvidia.com> Reviewed-on: http://git-master/r/99635 Reviewed-by: Simone Willett <swillett@nvidia.com> Tested-by: Simone Willett <swillett@nvidia.com>
2012-05-01Revert "video: tegra: dc: Clear window option before window update."Kevin Huang
This reverts commit 90b79e5712300baab889772a5af348559ac95836. Bug 955393 Change-Id: I0e2a15b7d0898dbbb62f09d8bd3502ec93366664 Signed-off-by: Kevin Huang <kevinh@nvidia.com> Reviewed-on: http://git-master/r/99261 Reviewed-by: Automatic_Commit_Validation_User Reviewed-by: Jon Mayo <jmayo@nvidia.com> Reviewed-by: Nirav Patel <nipatel@nvidia.com> Reviewed-by: Adam Cheney <acheney@nvidia.com> Tested-by: Adam Cheney <acheney@nvidia.com>
2012-05-01regulator: add sysfs for rail enable/disableLaxman Dewangan
Added support for enable/disable rails from user space. bug 966960 Change-Id: Iae660699c60f537296f90508a78bd40959c46535 Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Reviewed-on: http://git-master/r/99186 Reviewed-by: Automatic_Commit_Validation_User Reviewed-by: Hunk Lin <hulin@nvidia.com> Tested-by: Hunk Lin <hulin@nvidia.com> GVS: Gerrit_Virtual_Submit
2012-05-01power: smb349: update correct charger statusSyed Rafiuddin
Update correct status to fuel-gauge driver when charger cable is disconnected. Bug 960318 Change-Id: I4c3ad2030ada7c06825e80a3eb4697b669fe7cb6 Signed-off-by: Syed Rafiuddin <srafiuddin@nvidia.com> Reviewed-on: http://git-master/r/98719 Reviewed-by: Automatic_Commit_Validation_User Reviewed-by: Bharat Nihalani <bnihalani@nvidia.com>
2012-05-01mfd: max77663: Add FPWM and FSRADE clearing when initializationJinyoung Park
If sd power rail is not configured to FORCED_PWM_MODE or FSRADE_DISABLE, clear corresponding bits(FPWM and FSRADE) when initialization. Change-Id: I4e08329a430c6ccf7179b77cc7a283460ffaedd1 Signed-off-by: Jinyoung Park <jinyoungp@nvidia.com> Reviewed-on: http://git-master/r/98715 Reviewed-by: Simone Willett <swillett@nvidia.com> Tested-by: Simone Willett <swillett@nvidia.com>
2012-05-01power: smb349: fix NULL pointer issue.Syed Rafiuddin
Configure i2c client structure in update charger structure only when the charger driver is in use. If charger driver is not used return -ENODEV Change-Id: Ib1bc99145ee75bea819f69157920f9096e5d40ba Signed-off-by: Syed Rafiuddin <srafiuddin@nvidia.com> Reviewed-on: http://git-master/r/98712 Reviewed-by: Automatic_Commit_Validation_User Reviewed-by: Bharat Nihalani <bnihalani@nvidia.com>
2012-05-01power: max17048: correcting vcell calcualtionSyed Rafiuddin
Vcell is calculated based on upper 12msb's of ADC result. Signed-off-by: Syed Rafiuddin <srafiuddin@nvidia.com> Reviewed-on: http://git-master/r/95830 (cherry picked from commit e550636d9b03207b9d4fecf078168175964d85fd) Change-Id: Ic2834d8c8576b938e9d7d400c2beeb459ddeb5fc Reviewed-on: http://git-master/r/98669 Reviewed-by: Syed Rafiuddin <srafiuddin@nvidia.com> Tested-by: Syed Rafiuddin <srafiuddin@nvidia.com> Reviewed-by: Automatic_Commit_Validation_User Reviewed-by: Bharat Nihalani <bnihalani@nvidia.com>
2012-05-01video: tegra: host: t30: use max 2d clockDonghan Ryu
setting max 2d clock can make noticeable performance difference in 2d limited usecase such as buffer clearing Change-Id: I40ef999e7eeebff45b657f00293608561cae831d Signed-off-by: Donghan Ryu <dryu@nvidia.com> Reviewed-on: http://git-master/r/98644 Reviewed-by: Simone Willett <swillett@nvidia.com> Tested-by: Simone Willett <swillett@nvidia.com>
2012-05-01media: video: tegra: sh532u focus driverErik Lilliebjerg
- Abort initialization if an I2C error to avoid excessive load on the I2C bus since it is heavily used during initialization. - Updated to the latest NVC framework. - Added feature that allows for the key focus points to be set at runtime and the relative positions recalculated. Bug 929133 Bug 938934 Change-Id: Ida4ab885bf35057ae6df131e3ec3587a891a7dc9 Signed-off-by: Erik Lilliebjerg <elilliebjerg@nvidia.com> Reviewed-on: http://git-master/r/93944 Reviewed-by: Automatic_Commit_Validation_User Reviewed-by: Bharat Nihalani <bnihalani@nvidia.com>
2012-04-30net: wireless: sd8797: Add Kconfig to marvel sd8797Narayan Reddy
add Konfig to marvel 8797 and some tailing space corrections. Bug 954218 Change-Id: I2885f2a74dea14ffeeb5dad65e03e217c77c5013 Signed-off-by: Narayan Reddy <narayanr@nvidia.com> Reviewed-on: http://git-master/r/98436 Reviewed-by: Automatic_Commit_Validation_User Reviewed-by: Bharat Nihalani <bnihalani@nvidia.com>
2012-04-30net: wireless: sd8797: Marvell sd8797 Wi-Fi driverMohan T
Initial commit for Marvell sd8797 Wi-Fi driver Package Ver: T3T-14.69.11.p111-M2614303_A0B0-MGPL Bug 954218 Change-Id: I76fcadb5cda054d1e489c4cff77a3c461bdac742 Signed-off-by: Mohan T <mohant@nvidia.com> Reviewed-on: http://git-master/r/97305 Reviewed-by: Bharat Nihalani <bnihalani@nvidia.com>
2012-04-30media: video: tegra: ar0832: adjust frame rateJihoon Bang
Change line_length for 1080p mode in order to change frame rate from 31.30 to 29.50 fps. The reason that new fps is not 30 is because flicker detection requires fps not to be multiples of 60/50Hz. This change helps save power and lower the chance of frame drop. Bug 928296 Change-Id: I4fda13d9334c725754b3f5eab034309a1dfef3dc Signed-off-by: Jihoon Bang <jbang@nvidia.com> Reviewed-on: http://git-master/r/83636 Reviewed-by: Simone Willett <swillett@nvidia.com> Tested-by: Simone Willett <swillett@nvidia.com>
2012-04-26usb: otg: tegra: change logic for enable clockAndy Carman
When there is PMU interrupt we need to enable controller clock. For this currently, work is being schedule, removing this as clock can be enabled directly without scheduling any work. bug 925958 bug 941899 Signed-off-by: Andy Carman <acarman@nvidia.com> Signed-off-by: Krishna Yarlagadda <kyarlagadda@nvidia.com> Reviewed-on: http://git-master/r/88777 (cherry picked from commit fc31c04b7124f30970e862dd1b21a97d18dca38e) Change-Id: I8f6e7325771219488440226ddde97a32da228608 Reviewed-on: http://git-master/r/97882 Reviewed-by: Simone Willett <swillett@nvidia.com> Tested-by: Simone Willett <swillett@nvidia.com>
2012-04-26mmc: tegra: enable MMC_PM_IGNORE_PM_NOTIFYnaveenk
enable MMC_PM_IGNORE_PM_NOTIFY for all sd instances Bug 956238 Bug 932086 Change-Id: I4d455e480eabace403719f1813d97abfa4d01924 Signed-off-by: naveen kumar arepalli <naveenk@nvidia.com> Reviewed-on: http://git-master/r/96071 Reviewed-by: Automatic_Commit_Validation_User Reviewed-by: Pavan Kunapuli <pkunapuli@nvidia.com> Reviewed-by: Rakesh Kumar <krakesh@nvidia.com> Reviewed-by: Bitan Biswas <bbiswas@nvidia.com>
2012-04-26video: tegra: host: Reset 3D after power onTerje Bergstrom
Sometimes 3D unit comes up with incorrect scissor configuration. Earlier patch added the scissor registers to the context save list, but that did not solve the problem. Remove the extra registers, and reset 3D after powering it up. Bug 939307 Change-Id: Id795f2d99ec3c6b907da2785b1816ce753af7a3f Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com> Reviewed-on: http://git-master/r/87654 Reviewed-by: Automatic_Commit_Validation_User Reviewed-by: Graziano Misuraca <gmisuraca@nvidia.com> Tested-by: Graziano Misuraca <gmisuraca@nvidia.com> Reviewed-by: Juha Tukkinen <jtukkinen@nvidia.com> Reviewed-by: Mayuresh Kulkarni <mkulkarni@nvidia.com>
2012-04-25video: tegra: dsi: Add DSI register dump in debugfs.Kevin Huang
Bug 951349 Change-Id: I79fb2e49fa38b83af78323b5f5cf6dbca8fd83c2 Signed-off-by: Kevin Huang <kevinh@nvidia.com> Reviewed-on: http://git-master/r/98512 Reviewed-by: Rohan Somvanshi <rsomvanshi@nvidia.com> Tested-by: Rohan Somvanshi <rsomvanshi@nvidia.com>
2012-04-25net: usb: raw-ip: Fix autopm / system suspend issues.Michael Hsu
Add system suspend count and avoid urb activity during system suspend. Use async autopm to avoid deadlock with system suspend. Do not allocate rx urb's constantly - allocate once upon init, free rx urb upon exit. Bug 929408, 952748, 957354 Change-Id: I4ea050fc881528cf44d2039d42891e21c9df8c4e Signed-off-by: Michael Hsu <mhsu@nvidia.com> (cherry picked from commit 8bd7322127ccf6727d949f4bc1b2a4eac4b6814e) Reviewed-on: http://git-master/r/95166 Reviewed-by: Vinayak Pane <vpane@nvidia.com> Reviewed-by: Automatic_Commit_Validation_User Reviewed-by: Bharat Nihalani <bnihalani@nvidia.com>
2012-04-24hdmi: Set INJECT_NULL_SAMPLE only for stereo streamsSayak Ghosh Choudhury
Bug 953210 Change-Id: Id40b3fe90174a2a8c9a6faf3f35f61d9f7eeb642 Signed-off-by: Sayak Ghosh Choudhury <sayakc@nvidia.com> Reviewed-on: http://git-master/r/98477 Reviewed-by: Simone Willett <swillett@nvidia.com> Tested-by: Simone Willett <swillett@nvidia.com>
2012-04-24video: tegra: dc: Activate register update after programmedMark Zhang
Inform DC register updated after we programmed. This eliminates the display corruption while device enters and resumes from LP0. Signed-off-by: Mark Zhang <markz@nvidia.com> bug 964626 Change-Id: I4c655d4800474c675d4cdb6204d6fe66e8c6c4b5 Reviewed-on: http://git-master/r/98336 Tested-by: Mark Zhang <markz@nvidia.com> Reviewed-by: Automatic_Commit_Validation_User Reviewed-by: Peer Chen <pchen@nvidia.com> Reviewed-by: Jon Mayo <jmayo@nvidia.com>
2012-04-24power: max17048: configure hibernate modeSyed Rafiuddin
configure fuel-gauge to enter and exit hibernate mode Change-Id: Ifaa471a4b796fc1aa2b30f109091227eb19cf6ae Signed-off-by: Syed Rafiuddin <srafiuddin@nvidia.com> Reviewed-on: http://git-master/r/97900 Reviewed-by: Simone Willett <swillett@nvidia.com> Tested-by: Simone Willett <swillett@nvidia.com>
2012-04-24kernel: nvhost: add OOM checksAnton Kondratenko
This change adds check for out of memory conditions after memory allocations Bug 967504 Change-Id: Icafc16528880ea376dd69a023570b85c25e3d057 Signed-off-by: Anton Kondratenko <akondratenko@nvidia.com> Reviewed-on: http://git-master/r/97113 Reviewed-by: Automatic_Commit_Validation_User Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com> Tested-by: Terje Bergstrom <tbergstrom@nvidia.com>
2012-04-24ARM: tegra: dc: support YUV422 formatJon Mayo
Change-Id: I8aa25b03fe6801882b65209cb1a6e125ef27ac2c Signed-off-by: Michael I. Gold <gold@nvidia.com> Reviewed-on: http://git-master/r/98319 Reviewed-by: Rohan Somvanshi <rsomvanshi@nvidia.com> Tested-by: Rohan Somvanshi <rsomvanshi@nvidia.com>
2012-04-24video: tegra: dc: add tracing informationJon Mayo
add trace_printk to log useful debug information. Bug 870685 Change-Id: I29c0b1600f234ebb06d19c8b6c713b16f6e7643c Signed-off-by: Jon Mayo <jmayo@nvidia.com> Reviewed-on: http://git-master/r/89204 Reviewed-by: Automatic_Commit_Validation_User Reviewed-by: Prashant Malani <pmalani@nvidia.com>
2012-04-24media: video: tegra: tegra_camera: re-arch power and clockJihoon Bang
There are a couple of issues found in tegra_camera. 1. clock enable/disable is controlled by user space. -> If client process crashes, there is no way to disable clock. 2. power enable/disable is associated with clock enable. -> There is no reason to relate power with clock. -> There is only one regulator for this driver. -> As same as #1, it may leave power up when client process crashes. 3. driver allows multiple clients to access. -> This is not the case for this driver. This changes addresses the problems described above. Bug 948780 Change-Id: Ie534771327175f56cf0e138f1c07096ddba470a8 Signed-off-by: Jihoon Bang <jbang@nvidia.com> Reviewed-on: http://git-master/r/92386 Reviewed-by: Automatic_Commit_Validation_User Reviewed-by: David Schalig <dschalig@nvidia.com> Reviewed-by: Dan Willemsen <dwillemsen@nvidia.com>
2012-04-23video: tegra: nvavp: Add force clock stay on APIHyung Taek Ryoo
Add nvavp_force_clock_stay_on ioctl which provides way for user-mode driver to stay on AVP clock state. This change is to fix LP0 resume fail during Widevine playback. Since VDE/BSEV clocks are used by OTF driver in secure world during closing sesssion, the change makes VDE/BSEV clocks running while entering LP0. Bug 960130 Bug 961015 Change-Id: I7eaaa9a33537a72b6ae0a016372bc513fef532e2 Reviewed-on: http://git-master/r/96302 Reviewed-by: Hyung Taek Ryoo <hryoo@nvidia.com> Tested-by: Hyung Taek Ryoo <hryoo@nvidia.com> Reviewed-by: Automatic_Commit_Validation_User Reviewed-by: Karan Jhavar <kjhavar@nvidia.com> Reviewed-by: Dan Willemsen <dwillemsen@nvidia.com>
2012-04-20tegra: usb: otg: Clear only interrupt enabling bits in suspendJoshua Cha
In resuming from LP1, USB HOST is wrongly detected in Tegra2. In that time, adb connection doesn't work also. So clear only interrupt enabling bits to fix this problem. Bug 960254 Bug 970012 Change-Id: I2f8e891ab2abcf8552526ff305d6f3a148076edd Signed-off-by: Joshua Cha <joshuac@nvidia.com> Reviewed-on: http://git-master/r/96769 Reviewed-by: Simone Willett <swillett@nvidia.com> Tested-by: Simone Willett <swillett@nvidia.com>
2012-04-20video: tegra: dc: update windows after set lutAdam Cheney
TEGRA_DC_EXT_SET_LUT programmed the proper shadow registers but did not copy the shadow registers to the active set. Signed-off-by: Adam Cheney <acheney@nvidia.com> bug 947281 Change-Id: Id734e128bb708f1a75c0cad22b0c51b083d8df3b Reviewed-on: http://git-master/r/91368 Reviewed-by: Simone Willett <swillett@nvidia.com> Tested-by: Simone Willett <swillett@nvidia.com>
2012-04-19usb: otg: tegra: callback for otg plug/un-plug notificatonSyed Rafiuddin
Addition of callback function to nofity the plug and un-plug of OTG cable to charger driver. Change-Id: I6b16d051cafe0799cffe8a05d1510da27e841f8b Signed-off-by: Syed Rafiuddin <srafiuddin@nvidia.com> Reviewed-on: http://git-master/r/97514 Reviewed-by: Automatic_Commit_Validation_User Reviewed-by: Chandler Zhang <chazhang@nvidia.com> Tested-by: Chandler Zhang <chazhang@nvidia.com> Reviewed-by: Bharat Nihalani <bnihalani@nvidia.com>
2012-04-19mmc: tegra: Disable card and host clk separatelyPavan Kunapuli
Disable card clock before disabling internal clock to ensure that there are no abnormal clock waveforms. Bug 947058 Change-Id: I98a3f7f63b4380b62bead05f1018d3cddc0ac217 Signed-off-by: Pavan Kunapuli <pkunapuli@nvidia.com> Reviewed-on: http://git-master/r/95396 Reviewed-by: Simone Willett <swillett@nvidia.com> Tested-by: Simone Willett <swillett@nvidia.com>
2012-04-19mmc: host: Disable SDIO card clock when idlePavan Kunapuli
Disable SDIO card clock when there are no commands/ data transfers on the SD bus. Bug 958954 Bug 955742 Bug 952344 Change-Id: I7390be0406f7e46c0eb88ede2ae6f904b2181306 Signed-off-by: Pavan Kunapuli <pkunapuli@nvidia.com> Reviewed-on: http://git-master/r/95390 Reviewed-by: Simone Willett <swillett@nvidia.com> Tested-by: Simone Willett <swillett@nvidia.com>
2012-04-19usb: ehci: tegra: Fence read in unmap urbKrishna Yarlagadda
There is a chance that we might read an TD request which has just arrived after fence read in a interrupt handler. Added fence read in unmap urb to avoid this issue. Bug 964879 Signed-off-by: Krishna Yarlagadda <kyarlagadda@nvidia.com> Reviewed-on: http://git-master/r/95916 (cherry picked from commit 8d8415820014710052eef088ed2d579d0531cd52) Change-Id: Ia682654a25c685cf3dd2e76c8b9ea30427a06d89 Reviewed-on: http://git-master/r/97507 Reviewed-by: Rohan Somvanshi <rsomvanshi@nvidia.com> Tested-by: Rohan Somvanshi <rsomvanshi@nvidia.com>
2012-04-19drivers: resolve compilation time warningsSanjay Singh Rawat
bug 949219 Change-Id: I5942ba86bd1cbe1f1bd06a7c9f51a10d83e6cabb Signed-off-by: Sanjay Singh Rawat <srawat@nvidia.com> Reviewed-on: http://git-master/r/92819 Reviewed-by: Rohan Somvanshi <rsomvanshi@nvidia.com> Tested-by: Rohan Somvanshi <rsomvanshi@nvidia.com>
2012-04-18i2c: tegra: support for I2C_M_NOSTART protocol manglingLaxman Dewangan
Adding support for protocol mangling I2C_M_NOSTART. Change-Id: I6cc0c96b3c374d452ea886a0f983dc5d31c4575c Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Reviewed-on: http://git-master/r/92573 Reviewed-by: Simone Willett <swillett@nvidia.com> Tested-by: Simone Willett <swillett@nvidia.com>
2012-04-18power: smb349: addition of regulator interfaceSyed Rafiuddin
Addition of reglator interface to detect the usb cable plug/unplug detection. Bug 961166 Bug 966874 Change-Id: Ida297bc39df9aca8cffe60c29bc24f2d32819f56 Signed-off-by: Syed Rafiuddin <srafiuddin@nvidia.com> Signed-off-by: Chandler Zhang <chazhang@nvidia.com> Reviewed-on: http://git-master/r/96440 Reviewed-by: Automatic_Commit_Validation_User Reviewed-by: Sachin Nikam <snikam@nvidia.com>
2012-04-18mfd: max8907c: Disable Hard Reset with Power keyAshwini Ghuge
Disable Hard Reset on long press of power key. Bug 893517 Change-Id: Ic328a04e917aa1bed6780e6f9a2f1c575f84fb68 Signed-off-by: Ashwini Ghuge <aghuge@nvidia.com> Reviewed-on: http://git-master/r/96687 Reviewed-by: Simone Willett <swillett@nvidia.com> Tested-by: Simone Willett <swillett@nvidia.com>
2012-04-18usb: gadget: fsl_udc: support udc driver without otgRakesh Bodla
Currently udc driver is dependent on otg driver. Added irq work to make gadget driver work with disabling otg driver. Bug 962366 Change-Id: Id782d8003da12ace553b8b812fa410567c281b34 Reviewed-on: http://git-master/r/95106 Reviewed-by: Rakesh Bodla <rbodla@nvidia.com> Tested-by: Rakesh Bodla <rbodla@nvidia.com> Reviewed-by: Automatic_Commit_Validation_User Reviewed-by: Venkat Moganty <vmoganty@nvidia.com>
2012-04-17Revert "video: tegra: dc: load video mode during vblank"Jon Mayo
Change-Id: Ib1b0fc6015a9dd45982a97231972dadba6b5a92e Reviewed-on: http://git-master/r/96966 Reviewed-by: Automatic_Commit_Validation_User Reviewed-by: Rohan Somvanshi <rsomvanshi@nvidia.com> Tested-by: Rohan Somvanshi <rsomvanshi@nvidia.com>
generated by cgit v1.2.3 (git 2.0.4) at 2024-06-15 09:22:00 +0000