summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2012-06-15staging: r8712u: Add new USB IDsstaging-3.5-rc4Lubomir Schmidt
There are two new devices for this driver. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-14staging: gdm72xx: Release netlink socket properlyBen Chan
This patch modifies the gdm72xx driver to properly release a netlink socket using netlink_kernel_release. It fixes the following kernel crash, which occurs after repeatedly suspending and resuming a system. kernel BUG at /home/benchan/trunk/src/third_party/kernel/files/mm/slub.c:3471! invalid opcode: 0000 [#1] SMP CPU 2 Modules linked in: asix usbnet snd_hda_codec_hdmi snd_hda_codec_cirrus i2c_dev uinput snd_hda_intel snd_hda_codec snd_hwdep snd_pcm snd_timer bluetooth snd_page_alloc fuse aesni_intel cryptd isl29018(C) aes_x86_64 industrialio(C) memconsole nm10_gpio rtc_cmos nf_conntrack_ipv6 nf_defrag_ipv6 r8169 ath9k mac80211 ip6table_filter ath9k_common ath9k_hw ath cfg80211 xt_mark ip6_tables uvcvideo videobuf2_core videodev videobuf2_vmalloc videobuf2_memops gdmwm(C) joydev Pid: 3125, comm: kworker/u:30 Tainted: G WC 3.4.0 #1 RIP: 0010:[<ffffffff810cda19>] [<ffffffff810cda19>] kfree+0x67/0xca RSP: 0018:ffff880134977d60 EFLAGS: 00010246 RAX: 4000000000000400 RBX: ffffffff818832a0 RCX: 0000000000000000 RDX: 4000000000000000 RSI: 0000000000000000 RDI: ffffffff818832a0 RBP: ffff880134977d80 R08: 00000000ffffffff R09: ffffea00000620c0 R10: ffffffff8111b729 R11: ffff880149fb3840 R12: ffffffff81a08840 R13: ffffffff813f5bc3 R14: ffffffff8138ed84 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff88014fb00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 00007f7cad963110 CR3: 000000000180b000 CR4: 00000000000407e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process kworker/u:30 (pid: 3125, threadinfo ffff880134976000, task ffff8801330647e0) Stack: 0000000000000002 ffffffff818832a0 ffffffff81a08840 ffff880134977df0 ffff880134977da0 ffffffff813f5bc3 ffff880134977df0 ffffffff81883250 ffff880134977dd0 ffffffff8138e64c 0000000180150010 ffffffff81883250 Call Trace: [<ffffffff813f5bc3>] ipv4_sysctl_exit_net+0x23/0x27 [<ffffffff8138e64c>] ops_exit_list+0x27/0x50 [<ffffffff8138ee72>] cleanup_net+0xee/0x17c [<ffffffff81040c64>] process_one_work+0x199/0x2b8 [<ffffffff810416e4>] worker_thread+0x13c/0x222 [<ffffffff810415a8>] ? manage_workers.isra.26+0x171/0x171 [<ffffffff8104506d>] kthread+0x8b/0x93 [<ffffffff8145b414>] kernel_thread_helper+0x4/0x10 [<ffffffff81044fe2>] ? __init_kthread_worker+0x39/0x39 [<ffffffff8145b410>] ? gs_change+0xb/0xb Code: 83 c4 10 49 83 3c 24 00 eb e4 48 83 fb 10 76 76 48 89 df e8 17 e1 ff ff 49 89 c1 48 8b 00 a8 80 75 15 49 f7 01 00 c0 00 00 75 02 <0f> 0b 4c 89 cf e8 b8 b4 fd ff eb 4f 4c 8b 55 08 49 8b 79 30 48 RIP [<ffffffff810cda19>] kfree+0x67/0xca RSP <ffff880134977d60> Signed-off-by: Ben Chan <benchan@chromium.org> Cc: Sage Ahn <syahn@gctsemi.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-14iio: drop wrong reference from KconfigJiri Kosina
The documentation lives in drivers/staging/iio/Documentation, but according to Jonathan it's obsolete and needs fixing. Signed-off-by: Jiri Kosina <jkosina@suse.cz> Acked-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-12staging:iio:ad7298: Fix linker error due to missing IIO kfifo bufferLars-Peter Clausen
The ad7298 drivers buffer implementation uses the IIO kfifo buffer, so it needs to select IIO_KFIFO_BUF. Otherwise (if no other driver selects the symbol) the following linker error will occur: drivers/built-in.o: In function `ad7298_register_ring_funcs_and_init': (.text+0x245cf2): undefined reference to `iio_kfifo_allocate' drivers/built-in.o: In function `ad7298_register_ring_funcs_and_init': (.text+0x245d7d): undefined reference to `iio_kfifo_free' drivers/built-in.o: In function `ad7298_ring_cleanup': (.text+0x245dcd): undefined reference to `iio_kfifo_free' Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Reported-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-12Revert "staging: usbip: bugfix for stack corruption on 64-bit architectures"Greg Kroah-Hartman
This reverts commit 08224262adefb5e6460888b2490a96e1bc28aef5 as it's just not right. Reported-by: Ben Hutchings <ben@decadent.org.uk> Cc: stable <stable@vger.kernel.org> Cc: Bart Westgeest <bart@elbrys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-11staging: usbip: bugfix for stack corruption on 64-bit architecturesBart Westgeest
Previously a 6 byte array (buf) was erroneously cast to a 8 byte long (event_bits) on 64-bit architectures which caused a stack corruption. Signed-off-by: Bart Westgeest <bart@elbrys.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-11staging/comedi: fix build for USB not enabledRandy Dunlap
Calls to optional subsystems cannot be made indiscriminately. Enclose all of the usb helper functions inside #if IS_ENABLED(CONFIG_USB) to fix these build errors. (The pci helper functions are OK since there are stubs in linux/pci.h for the called functions when PCI is not enabled. Possibly the same could be done for the called USB functions.) ERROR: "usb_deregister" [drivers/staging/comedi/comedi.ko] undefined! ERROR: "usb_register_driver" [drivers/staging/comedi/comedi.ko] undefined! Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Cc: Ian Abbott <abbotti@mev.co.uk> Cc: Frank Mori Hess <fmhess@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-11staging: omapdrm: fix crash when freeing bad fbAndy Gross
During unload, don't cleanup the framebuffer if it is not valid. Signed-off-by: Andy Gross <andy.gross@ti.com> Reviewed-by: Rob Clark <rob.clark@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-07staging:iio:ad7606: Re-add missing scale attributeLars-Peter Clausen
Commit 50ac23be ("staging:iio:adc:ad7606 add local define for chan_spec structures.") accidentally removed the scale info_mask flag. This patch adds it back again. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Cc: stable <stable@vger.kernel.org> [3.2+] Acked-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-04iio: Fix potential use after freeLars-Peter Clausen
There is no guarantee that the last reference to the iio device has already been dropped when iio_device_free is called. This means that we can up calling iio_dev_release after iio_device_free which will lead to a use after free. As the general rule the struct containing the device should always be freed in the release callback. This is what this patch does, it moves freeing the iio device struct as well as releasing the idr reference to the release callback. To ensure that the device is not freed before calling iio_device_free the device_unregister call in iio_device_unregister is broken apart. iio_device_unregister will now only call device_del to remove the device from the system and iio_device_free will call put_device to drop the reference we obtained in iio_devce_alloc. We also have to take care that calling iio_device_free without having called iio_device_register still works (i.e. this can happen if something failed during device initialization). For this to work properly two minor changes were necessary: channel_attr_list needs to be initialized in iio_device_alloc and we have to check whether the chrdev has been registered before releasing it in iio_device_release. This change also brings iio_device_unregister and iio_device_free more in sync with iio_device_register and iio_device_alloc which call device_add and device_initialize respectively. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-04staging:iio: remove num_interrupt_lines from documentationJohan Hovold
Commit 5aa9618896e0ba49 ("staging:iio: remove broken support for multiple event interfaces.") removed the num_interrupt_lines field from struct iio_info but the documentation was never updated. Signed-off-by: Johan Hovold <jhovold@gmail.com> Acked-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-02Merge tag 'dm-3.5-changes-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-dm Pull device-mapper updates from Alasdair G Kergon: "Improve multipath's retrying mechanism in some defined circumstances and provide a simple reserve/release mechanism for userspace tools to access thin provisioning metadata while the pool is in use." * tag 'dm-3.5-changes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-dm: dm thin: provide userspace access to pool metadata dm thin: use slab mempools dm mpath: allow ioctls to trigger pg init dm mpath: delay retry of bypassed pg dm mpath: reduce size of struct multipath
2012-06-03dm thin: provide userspace access to pool metadataJoe Thornber
This patch implements two new messages that can be sent to the thin pool target allowing it to take a snapshot of the _metadata_. This, read-only snapshot can be accessed by userland, concurrently with the live target. Only one metadata snapshot can be held at a time. The pool's status line will give the block location for the current msnap. Since version 0.1.5 of the userland thin provisioning tools, the thin_dump program displays the msnap as follows: thin_dump -m <msnap root> <metadata dev> Available here: https://github.com/jthornber/thin-provisioning-tools Now that userland can access the metadata we can do various things that have traditionally been kernel side tasks: i) Incremental backups. By using metadata snapshots we can work out what blocks have changed over time. Combined with data snapshots we can ensure the data doesn't change while we back it up. A short proof of concept script can be found here: https://github.com/jthornber/thinp-test-suite/blob/master/incremental_backup_example.rb ii) Migration of thin devices from one pool to another. iii) Merging snapshots back into an external origin. iv) Asyncronous replication. Signed-off-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-06-03dm thin: use slab mempoolsMike Snitzer
Use dedicated caches prefixed with a "dm_" name rather than relying on kmalloc mempools backed by generic slab caches so the memory usage of thin provisioning (and any leaks) can be accounted for independently. Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-06-03dm mpath: allow ioctls to trigger pg initMikulas Patocka
After the failure of a group of paths, any alternative paths that need initialising do not become available until further I/O is sent to the device. Until this has happened, ioctls return -EAGAIN. With this patch, new paths are made available in response to an ioctl too. The processing of the ioctl gets delayed until this has happened. Instead of returning an error, we submit a work item to kmultipathd (that will potentially activate the new path) and retry in ten milliseconds. Note that the patch doesn't retry an ioctl if the ioctl itself fails due to a path failure. Such retries should be handled intelligently by the code that generated the ioctl in the first place, noting that some SCSI commands should not be retried because they are not idempotent (XOR write commands). For commands that could be retried, there is a danger that if the device rejected the SCSI command, the path could be errorneously marked as failed, and the request would be retried on another path which might fail too. It can be determined if the failure happens on the device or on the SCSI controller, but there is no guarantee that all SCSI drivers set these flags correctly. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-06-03dm mpath: delay retry of bypassed pgMike Christie
If I/O needs retrying and only bypassed priority groups are available, set the pg_init_delay_retry flag to wait before retrying. If, for example, the reason for the bypass is that the controller is getting reset or there is a firmware upgrade happening, retrying right away would cause a flood of log messages and retries for what could be a few seconds or even several minutes. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Acked-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-06-03dm mpath: reduce size of struct multipathMike Snitzer
Move multipath structure's 'lock' and 'queue_size' members to eliminate two 4-byte holes. Also use a bit within a single unsigned int for each existing flag (saves 8-bytes). This allows future flags to be added without each consuming an unsigned int. Signed-off-by: Mike Snitzer <snitzer@redhat.com> Acked-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-06-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking updates from David Miller: 1) Make syn floods consume significantly less resources by a) Not pre-COW'ing routing metrics for SYN/ACKs b) Mirroring the device queue mapping of the SYN for the SYN/ACK reply. Both from Eric Dumazet. 2) Fix calculation errors in Byte Queue Limiting, from Hiroaki SHIMODA. 3) Validate the length requested when building a paged SKB for a socket, so we don't overrun the page vector accidently. From Jason Wang. 4) When netlabel is disabled, we abort all IP option processing when we see a CIPSO option. This isn't the right thing to do, we should simply skip over it and continue processing the remaining options (if any). Fix from Paul Moore. 5) SRIOV fixes for the mellanox driver from Jack orgenstein and Marcel Apfelbaum. 6) 8139cp enables the receiver before the ring address is properly programmed, which potentially lets the device crap over random memory. Fix from Jason Wang. 7) e1000/e1000e fixes for i217 RST handling, and an improper buffer address reference in jumbo RX frame processing from Bruce Allan and Sebastian Andrzej Siewior, respectively. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: fec_mpc52xx: fix timestamp filtering mcs7830: Implement link state detection e1000e: fix Rapid Start Technology support for i217 e1000: look into the page instead of skb->data for e1000_tbi_adjust_stats() r8169: call netif_napi_del at errpaths and at driver unload tcp: reflect SYN queue_mapping into SYNACK packets tcp: do not create inetpeer on SYNACK message 8139cp/8139too: terminate the eeprom access with the right opmode 8139cp: set ring address before enabling receiver cipso: handle CIPSO options correctly when NetLabel is disabled net: sock: validate data_len before allocating skb in sock_alloc_send_pskb() bql: Avoid possible inconsistent calculation. bql: Avoid unneeded limit decrement. bql: Fix POSDIFF() to integer overflow aware. net/mlx4_core: Fix obscure mlx4_cmd_box parameter in QUERY_DEV_CAP net/mlx4_core: Check port out-of-range before using in mlx4_slave_cap net/mlx4_core: Fixes for VF / Guest startup flow net/mlx4_en: Fix improper use of "port" parameter in mlx4_en_event net/mlx4_core: Fix number of EQs used in ICM initialisation net/mlx4_core: Fix the slave_id out-of-range test in mlx4_eq_int
2012-06-02tty: Revert the tty locking series, it needs more workLinus Torvalds
This reverts the tty layer change to use per-tty locking, because it's not correct yet, and fixing it will require some more deep surgery. The main revert is d29f3ef39be4 ("tty_lock: Localise the lock"), but there are several smaller commits that built upon it, they also get reverted here. The list of reverted commits is: fde86d310886 - tty: add lockdep annotations 8f6576ad476b - tty: fix ldisc lock inversion trace d3ca8b64b97e - pty: Fix lock inversion b1d679afd766 - tty: drop the pty lock during hangup abcefe5fc357 - tty/amiserial: Add missing argument for tty_unlock() fd11b42e3598 - cris: fix missing tty arg in wait_event_interruptible_tty call d29f3ef39be4 - tty_lock: Localise the lock The revert had a trivial conflict in the 68360serial.c staging driver that got removed in the meantime. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-06-02fec_mpc52xx: fix timestamp filteringStephan Gatzka
skb_defer_rx_timestamp was called with a freshly allocated skb but must be called with rskb instead. Signed-off-by: Stephan Gatzka <stephan@gatzka.org> Cc: stable <stable@vger.kernel.org> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-02mcs7830: Implement link state detectionOndrej Zary
Add .status callback that detects link state changes. Tested with MCS7832CV-AA chip (9710:7830, identified as rev.C by the driver). Fixes https://bugzilla.kernel.org/show_bug.cgi?id=28532 Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-02e1000e: fix Rapid Start Technology support for i217Bruce Allan
The definition of I217_PROXY_CTRL must use the BM_PHY_REG() macro instead of the PHY_REG() macro for PHY page 800 register 70 since it is for a PHY register greater than the maximum allowed by the latter macro, and fix a typo setting the I217_MEMPWR register in e1000_suspend_workarounds_ich8lan. Also for clarity, rename a few defines as bit definitions instead of masks. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-06-02e1000: look into the page instead of skb->data for e1000_tbi_adjust_stats()Sebastian Andrzej Siewior
This is another fixup where the data is not transfered into buffer addressed by skb->data but into a page. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-06-01Merge tag 'fbdev-updates-for-3.5' of git://github.com/schandinat/linux-2.6Linus Torvalds
Pull fbdev updates from Florian Tobias Schandinat: - driver for AUO-K1900 and AUO-K1901 epaper controller - large updates for OMAP (e.g. decouple HDMI audio and video) - some updates for Exynos and SH Mobile - various other small fixes and cleanups * tag 'fbdev-updates-for-3.5' of git://github.com/schandinat/linux-2.6: (130 commits) video: bfin_adv7393fb: Fix cleanup code video: exynos_dp: reduce delay time when configuring video setting video: exynos_dp: move sw reset prioir to enabling sw defined function video: exynos_dp: use devm_ functions fb: handle NULL pointers in framebuffer release OMAPDSS: HDMI: OMAP4: Update IRQ flags for the HPD IRQ request OMAPDSS: Apply VENC timings even if panel is disabled OMAPDSS: VENC/DISPC: Delay dividing Y resolution for managers connected to VENC OMAPDSS: DISPC: Support rotation through TILER OMAPDSS: VRFB: remove compiler warnings when CONFIG_BUG=n OMAPFB: remove compiler warnings when CONFIG_BUG=n OMAPDSS: remove compiler warnings when CONFIG_BUG=n OMAPDSS: DISPC: fix usage of dispc_ovl_set_accu_uv OMAPDSS: use DSI_FIFO_BUG workaround only for manual update displays OMAPDSS: DSI: Support command mode interleaving during video mode blanking periods OMAPDSS: DISPC: Update Accumulator configuration for chroma plane drivers/video: fsl-diu-fb: don't initialize the THRESHOLDS registers video: exynos mipi dsi: support reverse panel type video: exynos mipi dsi: Properly interpret the interrupt source flags video: exynos mipi dsi: Avoid races in probe() ...
2012-06-01Merge tag 'for-linus-3.5-20120601' of git://git.infradead.org/linux-mtdLinus Torvalds
Pull mtd update from David Woodhouse: - More robust parsing especially of xattr data in JFFS2 - Updates to mxc_nand and gpmi drivers to support new boards and device tree - Improve consistency of information about ECC strength in NAND devices - Clean up partition handling of plat_nand - Support NAND drivers without dedicated access to OOB area - BCH hardware ECC support for OMAP - Other fixes and cleanups, and a few new device IDs Fixed trivial conflict in drivers/mtd/nand/gpmi-nand/gpmi-nand.c due to added include files next to each other. * tag 'for-linus-3.5-20120601' of git://git.infradead.org/linux-mtd: (75 commits) mtd: mxc_nand: move ecc strengh setup before nand_scan_tail mtd: block2mtd: fix recursive call of mtd_writev mtd: gpmi-nand: define ecc.strength mtd: of_parts: fix breakage in Kconfig mtd: nand: fix scan_read_raw_oob mtd: docg3 fix in-middle of blocks reads mtd: cfi_cmdset_0002: Slight cleanup of fixup messages mtd: add fixup for S29NS512P NOR flash. jffs2: allow to complete xattr integrity check on first GC scan jffs2: allow to discriminate between recoverable and non-recoverable errors mtd: nand: omap: add support for hardware BCH ecc ARM: OMAP3: gpmc: add BCH ecc api and modes mtd: nand: check the return code of 'read_oob/read_oob_raw' mtd: nand: remove 'sndcmd' parameter of 'read_oob/read_oob_raw' mtd: m25p80: Add support for Winbond W25Q80BW jffs2: get rid of jffs2_sync_super jffs2: remove unnecessary GC pass on sync jffs2: remove unnecessary GC pass on umount jffs2: remove lock_super mtd: gpmi: add gpmi support for mx6q ...
2012-06-01Merge branch 'for_linus' of git://cavan.codon.org.uk/platform-drivers-x86Linus Torvalds
Pull x86 platform driver updates from Matthew Garrett: "Some significant improvements for the Sony driver on newer machines, but other than that mostly just minor fixes and a patch to remove the broken rfkill code from the Dell driver." * 'for_linus' of git://cavan.codon.org.uk/platform-drivers-x86: (35 commits) apple-gmux: Fix up the suspend/resume patch dell-laptop: Remove rfkill code toshiba_acpi: Fix mis-merge dell-laptop: Add touchpad led support for Dell V3450 acer-wmi: add 3 laptops to video backlight vendor mode quirk table sony-laptop: add touchpad enable/disable function sony-laptop: add missing Fn key combos for 0x100 handlers sony-laptop: add support for more WWAN modems sony-laptop: new keyboard backlight handle sony-laptop: add high speed battery charging function sony-laptop: support automatic resume on lid open sony-laptop: adjust error handling in finding SNC handles sony-laptop: add thermal profiles support sony-laptop: support battery care functions sony-laptop: additional debug statements sony-laptop: improve SNC initialization and acpi notify callback code sony-laptop: use kstrtoul to parse sysfs values sony-laptop: generalise ACPI calls into SNC functions sony-laptop: fix return path when no ACPI buffer is allocated sony-laptop: use soft rfkill status stored in hw ...
2012-06-01Merge branch 'ux500/hickup' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull arm fixes for ux500 mismerge mishap from Arnd Bergmann: "The device tree conversion for arm/ux500 in 3.5 turns out to be incomplete because of a mismerge done by Linus Walleij that I failed to notice early enough and that Lee Jones as the original author of those patches did not manage to fix during the -next cycle. While we originally to get a much larger set of ux500 device tree enablement patches merged, this did not happen in time. After some discussion at Linaro Connect conference this week, Lee has been able to do damage control and provide a series to put the broken platform back into usable shape for both DT and non-DT based booting. This series has not been part of linux-next and is based on top of the current state of the upstream kernel rather than an -rc, but this is the best we could manage given the earlier breakage." * 'ux500/hickup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: ux500: Enable probing of pinctrl through Device Tree ARM: ux500: Add support for ab8500 regulators into the Device Tree ARM: ux500: Provide regulator support for SMSC911x via Device Tree ARM: ux500: Allow PRCMU regulator to be probed during a DT enabled boot ARM: ux500: Apply db8500-prcmu regulator information to db8500 Device Tree ARM: ux500: Only initialise STE's UIBs on boards which support them ARM: ux500: Disable platform setup of the ab8500 when DT is enabled ARM: ux500: Use correct format for dynamic IRQ assignment ARM: ux500: Re-enable SMSC911x platform code registration during non-DT boots ARM: ux500: PRCMU related configuration and layout corrections for Device Tree ARM: ux500: Remove DB8500 PRCMU platform registration when DT is enabled ARM: ux500: Disable SMSC911x platform code registration when DT is enabled ARM: ux500: New DT:ed u8500_init_devices for one-by-one device enablement ARM: ux500: New DT:ed snowball_platform_devs for one-by-one device enablement pinctrl-nomadik: Allow Device Tree driver probing
2012-06-01r8169: call netif_napi_del at errpaths and at driver unloadDevendra Naga
when register_netdev fails, the init'ed NAPIs by netif_napi_add must be deleted with netif_napi_del, and also when driver unloads, it should delete the NAPI before unregistering netdevice using unregister_netdev. Signed-off-by: Devendra Naga <devendra.aaru@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-01Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds
Pull drm fixes from Dave Airlie: "A bunch of fixes: - vmware memory corruption - ttm spinlock balance - cirrus/mgag200 work in the presence of efifb and finally Alex and Jerome managed to track down a magic set of bits that on certain rv740 and evergreen cards allow the correct use of the complete set of render backends, this makes the cards operate correctly in a number of scenarios we had issues in before, it also manages to boost speed on benchmarks my large amounts on these specific gpus." * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/edid: Make the header fixup threshold tunable drm/radeon: fix regression in UMS CS ioctl drm/vmwgfx: Fix nasty write past alloced memory area drm/ttm: Fix spinlock imbalance drm/radeon: fixup tiling group size and backendmap on r6xx-r9xx (v4) drm/radeon: fix HD6790, HD6570 backend programming drm/radeon: properly program gart on rv740, juniper, cypress, barts, hemlock drm/radeon: fix bank information in tiling config drm/mgag200: kick off conflicting framebuffers earlier. drm/cirrus: kick out conflicting framebuffers earlier cirrus: avoid crash if driver fails to load
2012-06-01mtd: mxc_nand: move ecc strengh setup before nand_scan_tailSascha Hauer
Since commit 6a918bade9dab40aaef80559bd1169c69e8d69cb, the mxc_nand driver fails with: Driver must set ecc.strength when using hardware ECC This is because nand_scan_tail checks for correct ecc strength settings, so we must set them up before nand_scan_tail. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Cc: stable@vger.kernel.org [3.4+] Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-06-01mtd: block2mtd: fix recursive call of mtd_writevGabor Juhos
The 'mtd_writev' interface calls the function assigned to the '_write' field of a given mtd device if that is not NULL. The block2mtd driver sets the '_writev' field to the 'mtd_writev' function itself and thus causes a endless loop. This is caused by 1dbebd32562b3c2caeca35960e5cb00bfcc12900 (mtd: harmonize mtd_writev usage). Remove the assignment from the block2mtd driver to fix the issue. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Cc: stable@kernel.org [3.3+] Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-06-01mtd: gpmi-nand: define ecc.strengthMarek Vasut
Fix an issue which was introduced by the recent addition of ecc.strength. The ecc.strength wasn't set in gpmi-nand, resulting in the following crash: [ 2.550000] kernel BUG at drivers/mtd/nand/nand_base.c:3347! ... [ 2.550000] [<c020841c>] (nand_scan_tail+0x328/0x650) from [<c02f68e0>] (gpmi_nand_probe+0x43c/0x5a4) [ 2.550000] [<c02f68e0>] (gpmi_nand_probe+0x43c/0x5a4) from [<c01f6618>] (platform_drv_probe+0x14/0x18) [ 2.550000] [<c01f6618>] (platform_drv_probe+0x14/0x18) from [<c01f55b0>] (driver_probe_device+0x74/0x1fc) [ 2.550000] [<c01f55b0>] (driver_probe_device+0x74/0x1fc) from [<c01f57cc>] (__driver_attach+0x94/0x98) [ 2.550000] [<c01f57cc>] (__driver_attach+0x94/0x98) from [<c01f3d40>] (bus_for_each_dev+0x50/0x80) [ 2.550000] [<c01f3d40>] (bus_for_each_dev+0x50/0x80) from [<c01f4e18>] (bus_add_driver+0x188/0x25c) [ 2.550000] [<c01f4e18>] (bus_add_driver+0x188/0x25c) from [<c01f5a70>] (driver_register+0x78/0x138) [ 2.550000] [<c01f5a70>] (driver_register+0x78/0x138) from [<c043dc7c>] (gpmi_nand_init+0xc/0x30) [ 2.550000] [<c043dc7c>] (gpmi_nand_init+0xc/0x30) from [<c0008824>] (do_one_initcall+0x108/0x17c) [ 2.550000] [<c0008824>] (do_one_initcall+0x108/0x17c) from [<c042a8b8>] (kernel_init+0xfc/0x1bc) [ 2.550000] [<c042a8b8>] (kernel_init+0xfc/0x1bc) from [<c000fab4>] (kernel_thread_exit+0x0/0x8) Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-06-01apple-gmux: Fix up the suspend/resume patchMatthew Garrett
I incorporated the wrong version of the suspend/resume patch for gmux, and so lost David Woodhouse's fix to leave the backlight level unchanged over suspend/resume. This fixes it up to v2. Signed-off-by: Matthew Garrett <mjg@redhat.com>
2012-06-01mtd: of_parts: fix breakage in KconfigFrank Svendsboe
MTD_OF_PARTS and the default setting is not working due to using 'Y' instead of 'y', introduced in commit d6137badeff1ef64b4e0092ec249ebdeaeb3ff37. This made our board, and possibly other boards using DTS defined partitions and not having CONFIG_MTD_OF_PARTS=y defined in the defconfig, fail to mount root. Signed-off-by: Frank Svendsboe <frank.svendsboe@gmail.com> Cc: stable@kernel.org [3.2+] Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-06-018139cp/8139too: terminate the eeprom access with the right opmodeJason Wang
Currently, we terminate the eeprom access through clearing the CS by: RTL_W8 (Cfg9346, ~EE_CS); or writeb (~EE_CS, ee_addr); This would left the eeprom into "Config. Register Write Enable:" state which is not expcted as the highest two bits were set to 0x11 ( expected is the "Normal" mode (0x00)). Solving this by write 0x0 instead of ~EE_CS when terminating the eeprom access. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-018139cp: set ring address before enabling receiverJason Wang
Currently, we enable the receiver before setting the ring address which could lead the card DMA into unexpected areas. Solving this by set the ring address before enabling the receiver. btw. I find and test this in qemu as I didn't have a 8139cp card in hand. please review it carefully. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-01Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs changes from Al Viro. "A lot of misc stuff. The obvious groups: * Miklos' atomic_open series; kills the damn abuse of ->d_revalidate() by NFS, which was the major stumbling block for all work in that area. * ripping security_file_mmap() and dealing with deadlocks in the area; sanitizing the neighborhood of vm_mmap()/vm_munmap() in general. * ->encode_fh() switched to saner API; insane fake dentry in mm/cleancache.c gone. * assorted annotations in fs (endianness, __user) * parts of Artem's ->s_dirty work (jff2 and reiserfs parts) * ->update_time() work from Josef. * other bits and pieces all over the place. Normally it would've been in two or three pull requests, but signal.git stuff had eaten a lot of time during this cycle ;-/" Fix up trivial conflicts in Documentation/filesystems/vfs.txt (the 'truncate_range' inode method was removed by the VM changes, the VFS update adds an 'update_time()' method), and in fs/btrfs/ulist.[ch] (due to sparse fix added twice, with other changes nearby). * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (95 commits) nfs: don't open in ->d_revalidate vfs: retry last component if opening stale dentry vfs: nameidata_to_filp(): don't throw away file on error vfs: nameidata_to_filp(): inline __dentry_open() vfs: do_dentry_open(): don't put filp vfs: split __dentry_open() vfs: do_last() common post lookup vfs: do_last(): add audit_inode before open vfs: do_last(): only return EISDIR for O_CREAT vfs: do_last(): check LOOKUP_DIRECTORY vfs: do_last(): make ENOENT exit RCU safe vfs: make follow_link check RCU safe vfs: do_last(): use inode variable vfs: do_last(): inline walk_component() vfs: do_last(): make exit RCU safe vfs: split do_lookup() Btrfs: move over to use ->update_time fs: introduce inode operation ->update_time reiserfs: get rid of resierfs_sync_super reiserfs: mark the superblock as dirty a bit later ...
2012-06-01dell-laptop: Remove rfkill codeMatthew Garrett
The interface just doesn't work on some machines, and Dell haven't been able to tell us either which machines those are or what we should be doing instead. This would be fine, except it results in userspace ending up confused and general sadness. So let's just rip it out for now. Signed-off-by: Matthew Garrett <mjg@redhat.com>
2012-06-01drm/edid: Make the header fixup threshold tunableAdam Jackson
6 bytes seems to be a reasonable default so far, but for the desperate it's worth exposing this. [airlied: change include to module.h for this] Bugzilla: https://bugzilla.redhat.com/582559 Signed-off-by: Adam Jackson <ajax@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-06-01drm/radeon: fix regression in UMS CS ioctlAlex Deucher
radeon_cs_parser_init is called by both the legacy UMS CS ioctl and the KMS CS ioctl. Protect KMS specific pieces of the code by checking that rdev is not NULL. Reported-by: Michael Burian <michael.burian@sbg.at> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-06-01drm/vmwgfx: Fix nasty write past alloced memory areaThomas Hellstrom
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Jakob Bornecrantz <jakob@vmware.com> Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-06-01drm/ttm: Fix spinlock imbalanceThomas Hellstrom
This imbalance may cause hangs when TTM is trying to swap out a buffer that is already on the delayed delete list. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Jakob Bornecrantz <jakob@vmware.com> Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-06-01drm/radeon: fixup tiling group size and backendmap on r6xx-r9xx (v4)Alex Deucher
Tiling group size is always 256bits on r6xx/r7xx/r8xx/9xx. Also fix and simplify render backend map. This now properly sets up the backend map on r6xx-9xx which should improve 3D performance. Vadim benchmarked also: Some benchmarks on juniper (5750), fullscreen 1920x1080, first result - kernel 3.4.0+ (fb21affa), second - with these patches: Lightsmark: 91 fps => 123 fps +35% Doom3: 74 fps => 101 fps +36% Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-06-01toshiba_acpi: Fix mis-mergeMatthew Garrett
I managed to screw up the various backlight changes and ended up memsetting the props structure after it had already been populated. This should fix it. Signed-off-by: Matthew Garrett <mjg@redhat.com>
2012-06-01drm/radeon: fix HD6790, HD6570 backend programmingJerome Glisse
Without this bit sets we get broken rendering and lockups. fglrx sets this bit. Bugs that should be fixed by this patch : https://bugs.freedesktop.org/show_bug.cgi?id=49792 https://bugzilla.kernel.org/show_bug.cgi?id=43207 https://bugs.freedesktop.org/show_bug.cgi?id=39282 Signed-off-by: Jerome Glisse <jglisse@redhat.com> Cc: stable@vger.kernel.org Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-06-01drm/radeon: properly program gart on rv740, juniper, cypress, barts, hemlockAlex Deucher
Need to program an additional VM register. This doesn't not currently cause any problems, but allows us to program the proper backend map in a subsequent patch which should improve performance on these asics. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-06-01drm/radeon: fix bank information in tiling configAlex Deucher
While there are cards with more than 8 mem banks, the max number of banks from a tiling perspective is 8, so cap the tiling config at 8 banks. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=43448 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-06-01drm/mgag200: kick off conflicting framebuffers earlier.Dave Airlie
It appears grub2 can pass framebuffer info via efifb, so we need to kick it off earlier to reserve the vram allocation. (just a fixup same as for cirrus) Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-06-01drm/cirrus: kick out conflicting framebuffers earlierDave Airlie
It appears that grub2 will pass framebuffer info via EFI, this causes the vram reserve to fail, so kick out efifb earlier before cirrus loads. Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=826983 Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-05-31Merge branch 'akpm' (Andrew's patch-bomb)Linus Torvalds
Merge misc patches from Andrew Morton: - the "misc" tree - stuff from all over the map - checkpatch updates - fatfs - kmod changes - procfs - cpumask - UML - kexec - mqueue - rapidio - pidns - some checkpoint-restore feature work. Reluctantly. Most of it delayed a release. I'm still rather worried that we don't have a clear roadmap to completion for this work. * emailed from Andrew Morton <akpm@linux-foundation.org>: (78 patches) kconfig: update compression algorithm info c/r: prctl: add ability to set new mm_struct::exe_file c/r: prctl: extend PR_SET_MM to set up more mm_struct entries c/r: procfs: add arg_start/end, env_start/end and exit_code members to /proc/$pid/stat syscalls, x86: add __NR_kcmp syscall fs, proc: introduce /proc/<pid>/task/<tid>/children entry sysctl: make kernel.ns_last_pid control dependent on CHECKPOINT_RESTORE aio/vfs: cleanup of rw_copy_check_uvector() and compat_rw_copy_check_uvector() eventfd: change int to __u64 in eventfd_signal() fs/nls: add Apple NLS pidns: make killed children autoreap pidns: use task_active_pid_ns in do_notify_parent rapidio/tsi721: add DMA engine support rapidio: add DMA engine support for RIO data transfers ipc/mqueue: add rbtree node caching support tools/selftests: add mq_perf_tests ipc/mqueue: strengthen checks on mqueue creation ipc/mqueue: correct mq_attr_ok test ipc/mqueue: improve performance of send/recv selftests: add mq_open_tests ...
generated by cgit v1.2.3 (git 2.0.4) at 2024-06-14 20:01:23 +0000