summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2018-03-18PCI: dwc: Fix enumeration end when reaching root subordinateKoen Vandeputte
commit fc110ebdd014dd1368c98e7685b47789c31fab42 upstream. The subordinate value indicates the highest bus number which can be reached downstream though a certain device. Commit a20c7f36bd3d ("PCI: Do not allocate more buses than available in parent") ensures that downstream devices cannot assign busnumbers higher than the upstream device subordinate number, which was indeed illogical. By default, dw_pcie_setup_rc() inits the Root Complex subordinate to a value of 0x01. Due to this combined with above commit, enumeration stops digging deeper downstream as soon as bus num 0x01 has been assigned, which is always the case for a bridge device. This results in all devices behind a bridge bus remaining undetected, as these would be connected to bus 0x02 or higher. Fix this by initializing the RC to a subordinate value of 0xff, which is not altering hardware behaviour in any way, but informs probing function pci_scan_bridge() later on which reads this value back from register. The following nasty errors during boot are also fixed by this: pci_bus 0000:02: busn_res: can not insert [bus 02-ff] under [bus 01] (conflicts with (null) [bus 01]) ... pci_bus 0000:03: [bus 03] partially hidden behind bridge 0000:01 [bus 01] ... pci_bus 0000:04: [bus 04] partially hidden behind bridge 0000:01 [bus 01] ... pci_bus 0000:05: [bus 05] partially hidden behind bridge 0000:01 [bus 01] pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 05 pci_bus 0000:02: busn_res: can not insert [bus 02-05] under [bus 01] (conflicts with (null) [bus 01]) pci_bus 0000:02: [bus 02-05] partially hidden behind bridge 0000:01 [bus 01] Fixes: a20c7f36bd3d ("PCI: Do not allocate more buses than available in parent") Tested-by: Niklas Cassel <niklas.cassel@axis.com> Tested-by: Fabio Estevam <fabio.estevam@nxp.com> Tested-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk> Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Lucas Stach <l.stach@pengutronix.de> Cc: stable@vger.kernel.org # v4.15+ Cc: Binghui Wang <wangbinghui@hisilicon.com> Cc: Jesper Nilsson <jesper.nilsson@axis.com> Cc: Jianguo Sun <sunjianguo1@huawei.com> Cc: Jingoo Han <jingoohan1@gmail.com> Cc: Kishon Vijay Abraham I <kishon@ti.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: Minghuan Lian <minghuan.Lian@freescale.com> Cc: Mingkai Hu <mingkai.hu@freescale.com> Cc: Murali Karicheri <m-karicheri2@ti.com> Cc: Pratyush Anand <pratyush.anand@gmail.com> Cc: Richard Zhu <hongxing.zhu@nxp.com> Cc: Roy Zang <tie-fei.zang@freescale.com> Cc: Shawn Guo <shawn.guo@linaro.org> Cc: Stanimir Varbanov <svarbanov@mm-sol.com> Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Cc: Xiaowei Song <songxiaowei@hisilicon.com> Cc: Zhou Wang <wangzhou1@hisilicon.com> [fabio: adapted to the file location of 4.9 kernel] Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-18earlycon: add reg-offset to physical address before mappingGreentime Hu
commit 1f66dd36bb18437397ea0d7882c52f7e3c476e15 upstream. It will get the wrong virtual address because port->mapbase is not added the correct reg-offset yet. We have to update it before earlycon_map() is called Signed-off-by: Greentime Hu <greentime@andestech.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Cc: Peter Hurley <peter@hurleysoftware.com> Cc: stable@vger.kernel.org Fixes: 088da2a17619 ("of: earlycon: Initialize port fields from DT properties") Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-18serial: core: mark port as initialized in autoconfigSebastian Andrzej Siewior
commit 714569064adee3c114a2a6490735b94abe269068 upstream. This is a followup on 44117a1d1732 ("serial: core: mark port as initialized after successful IRQ change"). Nikola has been using autoconfig via setserial and reported a crash similar to what I fixed in the earlier mentioned commit. Here I do the same fixup for the autoconfig. I wasn't sure that this is the right approach. Nikola confirmed that it fixes his crash. Fixes: b3b576461864 ("tty: serial_core: convert uart_open to use tty_port_open") Link: http://lkml.kernel.org/r/20180131072000.GD1853@localhost.localdomain Reported-by: Nikola Ciprich <nikola.ciprich@linuxbox.cz> Tested-by: Nikola Ciprich <nikola.ciprich@linuxbox.cz> Cc: <stable@vger.kernel.org> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Tested-by: Nikola Ciprich <nikola.ciprich@linuxbox.cz> Acked-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-18serial: 8250_pci: Add Brainboxes UC-260 4 port serial deviceNikola Ciprich
commit 9f2068f35729948bde84d87a40d135015911345d upstream. Add PCI ids for two variants of Brainboxes UC-260 quad port PCI serial cards. Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Nikola Ciprich <nikola.ciprich@linuxbox.cz> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-18usb: gadget: f_fs: Fix use-after-free in ffs_fs_kill_sb()Xinyong
commit 1a087f032111a88e826877449dfb93ceb22b78b9 upstream. When I debug a kernel crash issue in funcitonfs, found ffs_data.ref overflowed, While functionfs is unmounting, ffs_data is put twice. Commit 43938613c6fd ("drivers, usb: convert ffs_data.ref from atomic_t to refcount_t") can avoid refcount overflow, but that is risk some situations. So no need put ffs data in ffs_fs_kill_sb, already put in ffs_data_closed. The issue can be reproduced in Mediatek mt6763 SoC, ffs for ADB device. KASAN enabled configuration reports use-after-free errro. BUG: KASAN: use-after-free in refcount_dec_and_test+0x14/0xe0 at addr ffffffc0579386a0 Read of size 4 by task umount/4650 ==================================================== BUG kmalloc-512 (Tainted: P W O ): kasan: bad access detected ----------------------------------------------------------------------------- INFO: Allocated in ffs_fs_mount+0x194/0x844 age=22856 cpu=2 pid=566 alloc_debug_processing+0x1ac/0x1e8 ___slab_alloc.constprop.63+0x640/0x648 __slab_alloc.isra.57.constprop.62+0x24/0x34 kmem_cache_alloc_trace+0x1a8/0x2bc ffs_fs_mount+0x194/0x844 mount_fs+0x6c/0x1d0 vfs_kern_mount+0x50/0x1b4 do_mount+0x258/0x1034 INFO: Freed in ffs_data_put+0x25c/0x320 age=0 cpu=3 pid=4650 free_debug_processing+0x22c/0x434 __slab_free+0x2d8/0x3a0 kfree+0x254/0x264 ffs_data_put+0x25c/0x320 ffs_data_closed+0x124/0x15c ffs_fs_kill_sb+0xb8/0x110 deactivate_locked_super+0x6c/0x98 deactivate_super+0xb0/0xbc INFO: Object 0xffffffc057938600 @offset=1536 fp=0x (null) ...... Call trace: [<ffffff900808cf5c>] dump_backtrace+0x0/0x250 [<ffffff900808d3a0>] show_stack+0x14/0x1c [<ffffff90084a8c04>] dump_stack+0xa0/0xc8 [<ffffff900826c2b4>] print_trailer+0x158/0x260 [<ffffff900826d9d8>] object_err+0x3c/0x40 [<ffffff90082745f0>] kasan_report_error+0x2a8/0x754 [<ffffff9008274f84>] kasan_report+0x5c/0x60 [<ffffff9008273208>] __asan_load4+0x70/0x88 [<ffffff90084cd81c>] refcount_dec_and_test+0x14/0xe0 [<ffffff9008d98f9c>] ffs_data_put+0x80/0x320 [<ffffff9008d9d904>] ffs_fs_kill_sb+0xc8/0x110 [<ffffff90082852a0>] deactivate_locked_super+0x6c/0x98 [<ffffff900828537c>] deactivate_super+0xb0/0xbc [<ffffff90082af0c0>] cleanup_mnt+0x64/0xec [<ffffff90082af1b0>] __cleanup_mnt+0x10/0x18 [<ffffff90080d9e68>] task_work_run+0xcc/0x124 [<ffffff900808c8c0>] do_notify_resume+0x60/0x70 [<ffffff90080866e4>] work_pending+0x10/0x14 Cc: stable@vger.kernel.org Signed-off-by: Xinyong <xinyong.fang@linux.alibaba.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-18usb: usbmon: Read text within supplied buffer sizePete Zaitcev
commit a5f596830e27e15f7a0ecd6be55e433d776986d8 upstream. This change fixes buffer overflows and silent data corruption with the usbmon device driver text file read operations. Signed-off-by: Fredrik Noring <noring@nocrew.org> Signed-off-by: Pete Zaitcev <zaitcev@redhat.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-18usb: quirks: add control message delay for 1b1c:1b20Danilo Krummrich
commit cb88a0588717ba6c756cb5972d75766b273a6817 upstream. Corsair Strafe RGB keyboard does not respond to usb control messages sometimes and hence generates timeouts. Commit de3af5bf259d ("usb: quirks: add delay init quirk for Corsair Strafe RGB keyboard") tried to fix those timeouts by adding USB_QUIRK_DELAY_INIT. Unfortunately, even with this quirk timeouts of usb_control_msg() can still be seen, but with a lower frequency (approx. 1 out of 15): [ 29.103520] usb 1-8: string descriptor 0 read error: -110 [ 34.363097] usb 1-8: can't set config #1, error -110 Adding further delays to different locations where usb control messages are issued just moves the timeouts to other locations, e.g.: [ 35.400533] usbhid 1-8:1.0: can't add hid device: -110 [ 35.401014] usbhid: probe of 1-8:1.0 failed with error -110 The only way to reliably avoid those issues is having a pause after each usb control message. In approx. 200 boot cycles no more timeouts were seen. Addionaly, keep USB_QUIRK_DELAY_INIT as it turned out to be necessary to have the delay in hub_port_connect() after hub_port_init(). The overall boot time seems not to be influenced by these additional delays, even on fast machines and lightweight distributions. Fixes: de3af5bf259d ("usb: quirks: add delay init quirk for Corsair Strafe RGB keyboard") Cc: stable@vger.kernel.org Signed-off-by: Danilo Krummrich <danilokrummrich@dk-develop.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-18usbip: vudc: fix null pointer dereference on udc->lockColin Ian King
commit df3334c223a033f562645712e832ca4cbb326bbf upstream. Currently the driver attempts to spin lock on udc->lock before a NULL pointer check is performed on udc, hence there is a potential null pointer dereference on udc->lock. Fix this by moving the null check on udc before the lock occurs. Fixes: ea6873a45a22 ("usbip: vudc: Add SysFS infrastructure for VUDC") Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Shuah Khan <shuahkh@osg.samsung.com> Reviewed-by: Krzysztof Opasiak <k.opasiak@samsung.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-18USB: storage: Add JMicron bridge 152d:2567 to unusual_devs.hTeijo Kinnunen
commit 5126a504b63d82785eaece3a9c30c660b313785a upstream. This USB-SATA controller seems to be similar with JMicron bridge 152d:2566 already on the list. Adding it here fixes "Invalid field in cdb" errors. Signed-off-by: Teijo Kinnunen <teijo.kinnunen@code-q.fi> Cc: stable@vger.kernel.org Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-18staging: android: ashmem: Fix lockdep issue during llseekJoel Fernandes
commit cb57469c9573f6018cd1302953dd45d6e05aba7b upstream. ashmem_mutex create a chain of dependencies like so: (1) mmap syscall -> mmap_sem -> (acquired) ashmem_mmap ashmem_mutex (try to acquire) (block) (2) llseek syscall -> ashmem_llseek -> ashmem_mutex -> (acquired) inode_lock -> inode->i_rwsem (try to acquire) (block) (3) getdents -> iterate_dir -> inode_lock -> inode->i_rwsem (acquired) copy_to_user -> mmap_sem (try to acquire) There is a lock ordering created between mmap_sem and inode->i_rwsem causing a lockdep splat [2] during a syzcaller test, this patch fixes the issue by unlocking the mutex earlier. Functionally that's Ok since we don't need to protect vfs_llseek. [1] https://patchwork.kernel.org/patch/10185031/ [2] https://lkml.org/lkml/2018/1/10/48 Acked-by: Todd Kjos <tkjos@google.com> Cc: Arve Hjonnevag <arve@android.com> Cc: stable@vger.kernel.org Reported-by: syzbot+8ec30bb7bf1a981a2012@syzkaller.appspotmail.com Signed-off-by: Joel Fernandes <joelaf@google.com> Acked-by: Greg Hackmann <ghackmann@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-18staging: comedi: fix comedi_nsamples_left.Frank Mori Hess
commit a42ae5905140c324362fe5036ae1dbb16e4d359c upstream. A rounding error was causing comedi_nsamples_left to return the wrong value when nsamples was not a multiple of the scan length. Cc: <stable@vger.kernel.org> # v4.4+ Signed-off-by: Frank Mori Hess <fmh6jj@gmail.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-18uas: fix comparison for error codeOliver Neukum
commit 9a513c905bb95bef79d96feb08621c1ec8d8c4bb upstream. A typo broke the comparison. Fixes: cbeef22fd611 ("usb: uas: unconditionally bring back host after reset") Signed-off-by: Oliver Neukum <oneukum@suse.com> CC: stable@kernel.org Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-18tty/serial: atmel: add new version check for usartJonas Danielsson
commit fd63a8903a2c40425a9811c3371dd4d0f42c0ad3 upstream. On our at91sam9260 based board the usart0 and usart1 ports report their versions (ATMEL_US_VERSION) as 0x10302. This version is not included in the current checks in the driver. Signed-off-by: Jonas Danielsson <jonas@orbital-systems.com> Acked-by: Richard Genoud <richard.genoud@gmail.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-18serial: sh-sci: prevent lockup on full TTY buffersUlrich Hecht
commit 7842055bfce4bf0170d0f61df8b2add8399697be upstream. When the TTY buffers fill up to the configured maximum, a system lockup occurs: [ 598.820128] INFO: rcu_preempt detected stalls on CPUs/tasks: [ 598.825796] 0-...!: (1 GPs behind) idle=5a6/2/0 softirq=1974/1974 fqs=1 [ 598.832577] (detected by 3, t=62517 jiffies, g=296, c=295, q=126) [ 598.838755] Task dump for CPU 0: [ 598.841977] swapper/0 R running task 0 0 0 0x00000022 [ 598.849023] Call trace: [ 598.851476] __switch_to+0x98/0xb0 [ 598.854870] (null) This can be prevented by doing a dummy read of the RX data register. This issue affects both HSCIF and SCIF ports. Reported for R-Car H3 ES2.0; reproduced and fixed on H3 ES1.1. Probably affects other R-Car platforms as well. Reported-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Cc: stable <stable@vger.kernel.org> Tested-by: Nguyen Viet Dung <dung.nguyen.aj@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-18scsi: qla2xxx: Replace fcport alloc with qla2x00_alloc_fcportQuinn Tran
commit 063b36d6b0ad74c748d536f5cb47bac2f850a0fa upstream. Current code manually allocate an fcport structure that is not properly initialize. Replace kzalloc with qla2x00_alloc_fcport, so that all fields are initialized. Also set set scan flag to port found Cc: <stable@vger.kernel.org> Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-18ubi: Fix race condition between ubi volume creation and udevClay McClure
commit a51a0c8d213594bc094cb8e54aad0cb6d7f7b9a6 upstream. Similar to commit 714fb87e8bc0 ("ubi: Fix race condition between ubi device creation and udev"), we should make the volume active before registering it. Signed-off-by: Clay McClure <clay@daemons.net> Cc: <stable@vger.kernel.org> Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-18tc358743: fix register i2c_rd/wr function fixPhilipp Zabel
commit f2c61f98e0b5f8b53b8fb860e5dcdd661bde7d0b upstream. The below mentioned fix contains a small but severe bug, fix it to make the driver work again. Fixes: 3538aa6ecfb2 ("[media] tc358743: fix register i2c_rd/wr functions") Cc: Hans Verkuil <hans.verkuil@cisco.com> Cc: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Hans Verkuil <hansverk@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Cc: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-18Input: tca8418_keypad - remove double read of key event registerDmitry Torokhov
commit 9dd46c02532a6bed6240101ecf4bbc407f8c6adf upstream. There is no need to tread the same register twice in a row. Fixes: ea4348c8462a ("Input: tca8418_keypad - hide gcc-4.9 -Wmaybe-un ...") Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-18watchdog: hpwdt: Remove legacy NMI sourcing.Jerry Hoemann
commit 2b3d89b402b085b08498e896c65267a145bed486 upstream. Gen8 and prior Proliant systems supported the "CRU" interface to firmware. This interfaces allows linux to "call back" into firmware to source the cause of an NMI. This feature isn't fully utilized as the actual source of the NMI isn't printed, the driver only indicates that the source couldn't be determined when the call fails. With the advent of Gen9, iCRU replaces the CRU. The call back feature is no longer available in firmware. To be compatible and not attempt to call back into firmware on system not supporting CRU, the SMBIOS table is consulted to determine if it is safe to make the call back or not. This results in about half of the driver code being devoted to either making CRU calls or determing if it is safe to make CRU calls. As noted, the driver isn't really using the results of the CRU calls. Furthermore, as a consequence of the Spectre security issue, the BIOS/EFI calls are being wrapped into Spectre-disabling section. Removing the call back in hpwdt_pretimeout assists in this effort. As the CRU sourcing of the NMI isn't required for handling the NMI and there are security concerns with making the call back, remove the legacy (pre Gen9) NMI sourcing and the DMI code to determine if the system had the CRU interface. Signed-off-by: Jerry Hoemann <jerry.hoemann@hpe.com> Acked-by: Ingo Molnar <mingo@kernel.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-18watchdog: hpwdt: fix unused variable warningArnd Bergmann
commit aeebc6ba88ba3758ad95467ff6191fabf2074c13 upstream. The new hpwdt_my_nmi() function is used conditionally, which produces a harmless warning in some configurations: drivers/watchdog/hpwdt.c:478:12: error: 'hpwdt_my_nmi' defined but not used [-Werror=unused-function] This moves it inside of the #ifdef that protects its caller, to silence the warning. Fixes: 621174a92851 ("watchdog: hpwdt: Check source of NMI") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Jerry Hoemann <jerry.hoemann@hpe.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-18watchdog: hpwdt: Check source of NMIJerry Hoemann
commit 838534e50e2e5c1e644e30ab6cb28da88eb31368 upstream. Do not claim the NMI (i.e. return NMI_DONE) if the source of the NMI isn't the iLO watchdog or debug. Signed-off-by: Jerry Hoemann <jerry.hoemann@hpe.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-18watchdog: hpwdt: SMBIOS checkJerry Hoemann
commit c42cbe41727a138905a28f8e0b00c147be77ee93 upstream. This corrects: commit cce78da76601 ("watchdog: hpwdt: Add check for UEFI bits") The test on HPE SMBIOS extension type 219 record "Misc Features" bits for UEFI support is incorrect. The definition of the Misc Features bits in the HPE SMBIOS OEM Extensions specification (and related firmware) was changed to use a different pair of bits to represent UEFI supported. Howerver, a corresponding change to Linux was missed. Current code/platform work because the iCRU test is working. But purpose of cce78da766 is to ensure correct functionality on future systems where iCRU isn't supported. Signed-off-by: Jerry Hoemann <jerry.hoemann@hpe.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-18bcache: don't attach backing with duplicate UUIDMichael Lyle
commit 86755b7a96faed57f910f9e6b8061e019ac1ec08 upstream. This can happen e.g. during disk cloning. This is an incomplete fix: it does not catch duplicate UUIDs earlier when things are still unattached. It does not unregister the device. Further changes to cope better with this are planned but conflict with Coly's ongoing improvements to handling device errors. In the meantime, one can manually stop the device after this has happened. Attempts to attach a duplicate device result in: [ 136.372404] loop: module loaded [ 136.424461] bcache: register_bdev() registered backing device loop0 [ 136.424464] bcache: bch_cached_dev_attach() Tried to attach loop0 but duplicate UUID already attached My test procedure is: dd if=/dev/sdb1 of=imgfile bs=1024 count=262144 losetup -f imgfile Signed-off-by: Michael Lyle <mlyle@lyle.org> Reviewed-by: Tang Junhui <tang.junhui@zte.com.cn> Cc: <stable@vger.kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-18bcache: fix crashes in duplicate cache device registerTang Junhui
commit cc40daf91bdddbba72a4a8cd0860640e06668309 upstream. Kernel crashed when register a duplicate cache device, the call trace is bellow: [ 417.643790] CPU: 1 PID: 16886 Comm: bcache-register Tainted: G W OE 4.15.5-amd64-preempt-sysrq-20171018 #2 [ 417.643861] Hardware name: LENOVO 20ERCTO1WW/20ERCTO1WW, BIOS N1DET41W (1.15 ) 12/31/2015 [ 417.643870] RIP: 0010:bdevname+0x13/0x1e [ 417.643876] RSP: 0018:ffffa3aa9138fd38 EFLAGS: 00010282 [ 417.643884] RAX: 0000000000000000 RBX: ffff8c8f2f2f8000 RCX: ffffd6701f8 c7edf [ 417.643890] RDX: ffffa3aa9138fd88 RSI: ffffa3aa9138fd88 RDI: 00000000000 00000 [ 417.643895] RBP: ffffa3aa9138fde0 R08: ffffa3aa9138fae8 R09: 00000000000 1850e [ 417.643901] R10: ffff8c8eed34b271 R11: ffff8c8eed34b250 R12: 00000000000 00000 [ 417.643906] R13: ffffd6701f78f940 R14: ffff8c8f38f80000 R15: ffff8c8ea7d 90000 [ 417.643913] FS: 00007fde7e66f500(0000) GS:ffff8c8f61440000(0000) knlGS: 0000000000000000 [ 417.643919] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 417.643925] CR2: 0000000000000314 CR3: 00000007e6fa0001 CR4: 00000000003 606e0 [ 417.643931] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 00000000000 00000 [ 417.643938] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 00000000000 00400 [ 417.643946] Call Trace: [ 417.643978] register_bcache+0x1117/0x1270 [bcache] [ 417.643994] ? slab_pre_alloc_hook+0x15/0x3c [ 417.644001] ? slab_post_alloc_hook.isra.44+0xa/0x1a [ 417.644013] ? kernfs_fop_write+0xf6/0x138 [ 417.644020] kernfs_fop_write+0xf6/0x138 [ 417.644031] __vfs_write+0x31/0xcc [ 417.644043] ? current_kernel_time64+0x10/0x36 [ 417.644115] ? __audit_syscall_entry+0xbf/0xe3 [ 417.644124] vfs_write+0xa5/0xe2 [ 417.644133] SyS_write+0x5c/0x9f [ 417.644144] do_syscall_64+0x72/0x81 [ 417.644161] entry_SYSCALL_64_after_hwframe+0x3d/0xa2 [ 417.644169] RIP: 0033:0x7fde7e1c1974 [ 417.644175] RSP: 002b:00007fff13009a38 EFLAGS: 00000246 ORIG_RAX: 0000000 000000001 [ 417.644183] RAX: ffffffffffffffda RBX: 0000000001658280 RCX: 00007fde7e1c 1974 [ 417.644188] RDX: 000000000000000a RSI: 0000000001658280 RDI: 000000000000 0001 [ 417.644193] RBP: 000000000000000a R08: 0000000000000003 R09: 000000000000 0077 [ 417.644198] R10: 000000000000089e R11: 0000000000000246 R12: 000000000000 0001 [ 417.644203] R13: 000000000000000a R14: 7fffffffffffffff R15: 000000000000 0000 [ 417.644213] Code: c7 c2 83 6f ee 98 be 20 00 00 00 48 89 df e8 6c 27 3b 0 0 48 89 d8 5b c3 0f 1f 44 00 00 48 8b 47 70 48 89 f2 48 8b bf 80 00 00 00 <8 b> b0 14 03 00 00 e9 73 ff ff ff 0f 1f 44 00 00 48 8b 47 40 39 [ 417.644302] RIP: bdevname+0x13/0x1e RSP: ffffa3aa9138fd38 [ 417.644306] CR2: 0000000000000314 When registering duplicate cache device in register_cache(), after failure on calling register_cache_set(), bch_cache_release() will be called, then bdev will be freed, so bdevname(bdev, name) caused kernel crash. Since bch_cache_release() will free bdev, so in this patch we make sure bdev being freed if register_cache() fail, and do not free bdev again in register_bcache() when register_cache() fail. Signed-off-by: Tang Junhui <tang.junhui@zte.com.cn> Reported-by: Marc MERLIN <marc@merlins.org> Tested-by: Michael Lyle <mlyle@lyle.org> Reviewed-by: Michael Lyle <mlyle@lyle.org> Cc: <stable@vger.kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-18IB/mlx5: Fix incorrect size of klms in the memory regionSergey Gorenko
commit da343b6d90e11132f1e917d865d88ee35d6e6d00 upstream. The value of mr->ndescs greater than mr->max_descs is set in the function mlx5_ib_sg_to_klms() if sg_nents is greater than mr->max_descs. This is an invalid value and it causes the following error when registering mr: mlx5_0:dump_cqe:276:(pid 193): dump error cqe 00000000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00000010: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00000020: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00000030: 00 00 00 00 0f 00 78 06 25 00 00 8b 08 1e 8f d3 Cc: <stable@vger.kernel.org> # 4.5 Fixes: b005d3164713 ("mlx5: Add arbitrary sg list support") Signed-off-by: Sergey Gorenko <sergeygo@mellanox.com> Tested-by: Laurence Oberman <loberman@redhat.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-18virtio_ring: fix num_free handling in error caseTiwei Bie
commit e82df670235138575b37ff0ec24412a471efd97f upstream. The vq->vq.num_free hasn't been changed when error happens, so it shouldn't be changed when handling the error. Fixes: 780bc7903a32 ("virtio_ring: Support DMA APIs") Cc: Andy Lutomirski <luto@kernel.org> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Tiwei Bie <tiwei.bie@intel.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-18loop: Fix lost writes caused by missing flagRoss Zwisler
commit 1d037577c323e5090ce281e96bc313ab2eee5be2 upstream. The following commit: commit aa4d86163e4e ("block: loop: switch to VFS ITER_BVEC") replaced __do_lo_send_write(), which used ITER_KVEC iterators, with lo_write_bvec() which uses ITER_BVEC iterators. In this change, though, the WRITE flag was lost: - iov_iter_kvec(&from, ITER_KVEC | WRITE, &kvec, 1, len); + iov_iter_bvec(&i, ITER_BVEC, bvec, 1, bvec->bv_len); This flag is necessary for the DAX case because we make decisions based on whether or not the iterator is a READ or a WRITE in dax_iomap_actor() and in dax_iomap_rw(). We end up going through this path in configurations where we combine a PMEM device with 4k sectors, a loopback device and DAX. The consequence of this missed flag is that what we intend as a write actually turns into a read in the DAX code, so no data is ever written. The very simplest test case is to create a loopback device and try and write a small string to it, then hexdump a few bytes of the device to see if the write took. Without this patch you read back all zeros, with this you read back the string you wrote. For XFS this causes us to fail or panic during the following xfstests: xfs/074 xfs/078 xfs/216 xfs/217 xfs/250 For ext4 we have a similar issue where writes never happen, but we don't currently have any xfstests that use loopback and show this issue. Fix this by restoring the WRITE flag argument to iov_iter_bvec(). This causes the xfstests to all pass. Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: stable@vger.kernel.org Fixes: commit aa4d86163e4e ("block: loop: switch to VFS ITER_BVEC") Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-18Input: matrix_keypad - fix race when disabling interruptsZhang Bo
commit ea4f7bd2aca9f68470e9aac0fc9432fd180b1fe7 upstream. If matrix_keypad_stop() is executing and the keypad interrupt is triggered, disable_row_irqs() may be called by both matrix_keypad_interrupt() and matrix_keypad_stop() at the same time, causing interrupts to be disabled twice and the keypad being "stuck" after resuming. Take lock when setting keypad->stopped to ensure that ISR will not race with matrix_keypad_stop() disabling interrupts. Signed-off-by: Zhang Bo <zbsdta@126.com> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-18drm/amdgpu:Always save uvd vcpu_bo in VM ModeJames Zhu
commit f8bee6135e167f5b35b7789c74c2956dad14d0d5 upstream. When UVD is in VM mode, there is not uvd handle exchanged, uvd.handles are always 0. So vcpu_bo always need save, Otherwise amdgpu driver will fail during suspend/resume. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105021 Signed-off-by: James Zhu <James.Zhu@amd.com> Reviewed-by: Leo Liu <leo.liu@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-18drm/amdgpu:Correct max uvd handlesJames Zhu
commit 0e5ee33d2a54e4c55fe92857f23e1cbb0440d6de upstream. Max uvd handles should use adev->uvd.max_handles instead of AMDGPU_MAX_UVD_HANDLES here. Signed-off-by: James Zhu <James.Zhu@amd.com> Reviewed-by: Leo Liu <leo.liu@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-18drm/amdgpu: fix KV harvestingAlex Deucher
commit 545b0bcde7fbd3ee408fa842ea0731451dc4bd0a upstream. Always set the graphics values to the max for the asic type. E.g., some 1 RB chips are actually 1 RB chips, others are actually harvested 2 RB chips. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=99353 Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-18drm/radeon: fix KV harvestingAlex Deucher
commit 0b58d90f89545e021d188c289fa142e5ff9e708b upstream. Always set the graphics values to the max for the asic type. E.g., some 1 RB chips are actually 1 RB chips, others are actually harvested 2 RB chips. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=99353 Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-18drm/amdgpu: Notify sbios device ready before send requestRex Zhu
commit 1bced75f4ab04bec55aecb57d99435dc6d0ae5a0 upstream. it is required if a platform supports PCIe root complex core voltage reduction. After receiving this notification, SBIOS can apply default PCIe root complex power policy. Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-18drm/amdgpu: Fix deadlock on runtime suspendLukas Wunner
commit aa0aad57909eb321746325951d66af88a83bc956 upstream. amdgpu's ->runtime_suspend hook calls drm_kms_helper_poll_disable(), which waits for the output poll worker to finish if it's running. The output poll worker meanwhile calls pm_runtime_get_sync() in amdgpu's ->detect hooks, which waits for the ongoing suspend to finish, causing a deadlock. Fix by not acquiring a runtime PM ref if the ->detect hooks are called in the output poll worker's context. This is safe because the poll worker is only enabled while runtime active and we know that ->runtime_suspend waits for it to finish. Fixes: d38ceaf99ed0 ("drm/amdgpu: add core driver (v4)") Cc: stable@vger.kernel.org # v4.2+: 27d4ee03078a: workqueue: Allow retrieval of current task's work struct Cc: stable@vger.kernel.org # v4.2+: 25c058ccaf2e: drm: Allow determining if current task is output poll worker Cc: Alex Deucher <alexander.deucher@amd.com> Tested-by: Mike Lothian <mike@fireburn.co.uk> Reviewed-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Lukas Wunner <lukas@wunner.de> Link: https://patchwork.freedesktop.org/patch/msgid/4c9bf72aacae1eef062bd134cd112e0770a7f121.1518338789.git.lukas@wunner.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-18drm/radeon: Fix deadlock on runtime suspendLukas Wunner
commit 15734feff2bdac24aa3266c437cffa42851990e3 upstream. radeon's ->runtime_suspend hook calls drm_kms_helper_poll_disable(), which waits for the output poll worker to finish if it's running. The output poll worker meanwhile calls pm_runtime_get_sync() in radeon's ->detect hooks, which waits for the ongoing suspend to finish, causing a deadlock. Fix by not acquiring a runtime PM ref if the ->detect hooks are called in the output poll worker's context. This is safe because the poll worker is only enabled while runtime active and we know that ->runtime_suspend waits for it to finish. Stack trace for posterity: INFO: task kworker/0:3:31847 blocked for more than 120 seconds Workqueue: events output_poll_execute [drm_kms_helper] Call Trace: schedule+0x3c/0x90 rpm_resume+0x1e2/0x690 __pm_runtime_resume+0x3f/0x60 radeon_lvds_detect+0x39/0xf0 [radeon] output_poll_execute+0xda/0x1e0 [drm_kms_helper] process_one_work+0x14b/0x440 worker_thread+0x48/0x4a0 INFO: task kworker/2:0:10493 blocked for more than 120 seconds. Workqueue: pm pm_runtime_work Call Trace: schedule+0x3c/0x90 schedule_timeout+0x1b3/0x240 wait_for_common+0xc2/0x180 wait_for_completion+0x1d/0x20 flush_work+0xfc/0x1a0 __cancel_work_timer+0xa5/0x1d0 cancel_delayed_work_sync+0x13/0x20 drm_kms_helper_poll_disable+0x1f/0x30 [drm_kms_helper] radeon_pmops_runtime_suspend+0x3d/0xa0 [radeon] pci_pm_runtime_suspend+0x61/0x1a0 vga_switcheroo_runtime_suspend+0x21/0x70 __rpm_callback+0x32/0x70 rpm_callback+0x24/0x80 rpm_suspend+0x12b/0x640 pm_runtime_work+0x6f/0xb0 process_one_work+0x14b/0x440 worker_thread+0x48/0x4a0 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=94147 Fixes: 10ebc0bc0934 ("drm/radeon: add runtime PM support (v2)") Cc: stable@vger.kernel.org # v3.13+: 27d4ee03078a: workqueue: Allow retrieval of current task's work struct Cc: stable@vger.kernel.org # v3.13+: 25c058ccaf2e: drm: Allow determining if current task is output poll worker Cc: Ismo Toijala <ismo.toijala@gmail.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Dave Airlie <airlied@redhat.com> Reviewed-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Lukas Wunner <lukas@wunner.de> Link: https://patchwork.freedesktop.org/patch/msgid/64ea02c44f91dda19bc563902b97bbc699040392.1518338789.git.lukas@wunner.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-18drm/nouveau: Fix deadlock on runtime suspendLukas Wunner
commit d61a5c1063515e855bedb1b81e20e50b0ac3541e upstream. nouveau's ->runtime_suspend hook calls drm_kms_helper_poll_disable(), which waits for the output poll worker to finish if it's running. The output poll worker meanwhile calls pm_runtime_get_sync() in nouveau_connector_detect() which waits for the ongoing suspend to finish, causing a deadlock. Fix by not acquiring a runtime PM ref if nouveau_connector_detect() is called in the output poll worker's context. This is safe because the poll worker is only enabled while runtime active and we know that ->runtime_suspend waits for it to finish. Other contexts calling nouveau_connector_detect() do require a runtime PM ref, these comprise: status_store() drm sysfs interface ->fill_modes drm callback drm_fb_helper_probe_connector_modes() drm_mode_getconnector() nouveau_connector_hotplug() nouveau_display_hpd_work() nv17_tv_set_property() Stack trace for posterity: INFO: task kworker/0:1:58 blocked for more than 120 seconds. Workqueue: events output_poll_execute [drm_kms_helper] Call Trace: schedule+0x28/0x80 rpm_resume+0x107/0x6e0 __pm_runtime_resume+0x47/0x70 nouveau_connector_detect+0x7e/0x4a0 [nouveau] nouveau_connector_detect_lvds+0x132/0x180 [nouveau] drm_helper_probe_detect_ctx+0x85/0xd0 [drm_kms_helper] output_poll_execute+0x11e/0x1c0 [drm_kms_helper] process_one_work+0x184/0x380 worker_thread+0x2e/0x390 INFO: task kworker/0:2:252 blocked for more than 120 seconds. Workqueue: pm pm_runtime_work Call Trace: schedule+0x28/0x80 schedule_timeout+0x1e3/0x370 wait_for_completion+0x123/0x190 flush_work+0x142/0x1c0 nouveau_pmops_runtime_suspend+0x7e/0xd0 [nouveau] pci_pm_runtime_suspend+0x5c/0x180 vga_switcheroo_runtime_suspend+0x1e/0xa0 __rpm_callback+0xc1/0x200 rpm_callback+0x1f/0x70 rpm_suspend+0x13c/0x640 pm_runtime_work+0x6e/0x90 process_one_work+0x184/0x380 worker_thread+0x2e/0x390 Bugzilla: https://bugs.archlinux.org/task/53497 Bugzilla: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=870523 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=70388#c33 Fixes: 5addcf0a5f0f ("nouveau: add runtime PM support (v0.9)") Cc: stable@vger.kernel.org # v3.12+: 27d4ee03078a: workqueue: Allow retrieval of current task's work struct Cc: stable@vger.kernel.org # v3.12+: 25c058ccaf2e: drm: Allow determining if current task is output poll worker Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Dave Airlie <airlied@redhat.com> Reviewed-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Lukas Wunner <lukas@wunner.de> Link: https://patchwork.freedesktop.org/patch/msgid/b7d2cbb609a80f59ccabfdf479b9d5907c603ea1.1518338789.git.lukas@wunner.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-18drm: Allow determining if current task is output poll workerLukas Wunner
commit 25c058ccaf2ebbc3e250ec1e199e161f91fe27d4 upstream. Introduce a helper to determine if the current task is an output poll worker. This allows us to fix a long-standing deadlock in several DRM drivers wherein the ->runtime_suspend callback waits for the output poll worker to finish and the worker in turn calls a ->detect callback which waits for runtime suspend to finish. The ->detect callback is invoked from multiple call sites and waiting for runtime suspend to finish is the correct thing to do except if it's executing in the context of the worker. v2: Expand kerneldoc to specifically mention deadlock between output poll worker and autosuspend worker as use case. (Lyude) Cc: Dave Airlie <airlied@redhat.com> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Lukas Wunner <lukas@wunner.de> Link: https://patchwork.freedesktop.org/patch/msgid/3549ce32e7f1467102e70d3e9cbf70c46bfe108e.1518593424.git.lukas@wunner.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-18drm/i915: Always call to intel_display_set_init_power() in resume_early.Maarten Lankhorst
commit d13a8479f3584613b6aacbb793eae64578b8f69a upstream. intel_power_domains_init_hw() calls set_init_power, but when using runtime power management this call is skipped. This prevents hw readout from taking place. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=104172 Link: https://patchwork.freedesktop.org/patch/msgid/20180116155324.75120-1-maarten.lankhorst@linux.intel.com Fixes: bc87229f323e ("drm/i915/skl: enable PC9/10 power states during suspend-to-idle") Cc: Nivedita Swaminathan <nivedita.swaminathan@intel.com> Cc: Imre Deak <imre.deak@intel.com> Cc: Patrik Jakobsson <patrik.jakobsson@linux.intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: <stable@vger.kernel.org> # v4.5+ Reviewed-by: Imre Deak <imre.deak@intel.com> (cherry picked from commit ac25dfed15d470d7f23dd817e965b54aa3f94a1e) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-18scsi: qla2xxx: Fix NULL pointer crash due to active timer for ABTShimanshu.madhani@cavium.com
commit 1514839b366417934e2f1328edb50ed1e8a719f5 upstream. This patch fixes NULL pointer crash due to active timer running for abort IOCB. From crash dump analysis it was discoverd that get_next_timer_interrupt() encountered a corrupted entry on the timer list. #9 [ffff95e1f6f0fd40] page_fault at ffffffff914fe8f8 [exception RIP: get_next_timer_interrupt+440] RIP: ffffffff90ea3088 RSP: ffff95e1f6f0fdf0 RFLAGS: 00010013 RAX: ffff95e1f6451028 RBX: 000218e2389e5f40 RCX: 00000001232ad600 RDX: 0000000000000001 RSI: ffff95e1f6f0fdf0 RDI: 0000000001232ad6 RBP: ffff95e1f6f0fe40 R8: ffff95e1f6451188 R9: 0000000000000001 R10: 0000000000000016 R11: 0000000000000016 R12: 00000001232ad5f6 R13: ffff95e1f6450000 R14: ffff95e1f6f0fdf8 R15: ffff95e1f6f0fe10 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 Looking at the assembly of get_next_timer_interrupt(), address came from %r8 (ffff95e1f6451188) which is pointing to list_head with single entry at ffff95e5ff621178. 0xffffffff90ea307a <get_next_timer_interrupt+426>: mov (%r8),%rdx 0xffffffff90ea307d <get_next_timer_interrupt+429>: cmp %r8,%rdx 0xffffffff90ea3080 <get_next_timer_interrupt+432>: je 0xffffffff90ea30a7 <get_next_timer_interrupt+471> 0xffffffff90ea3082 <get_next_timer_interrupt+434>: nopw 0x0(%rax,%rax,1) 0xffffffff90ea3088 <get_next_timer_interrupt+440>: testb $0x1,0x18(%rdx) crash> rd ffff95e1f6451188 10 ffff95e1f6451188: ffff95e5ff621178 ffff95e5ff621178 x.b.....x.b..... ffff95e1f6451198: ffff95e1f6451198 ffff95e1f6451198 ..E.......E..... ffff95e1f64511a8: ffff95e1f64511a8 ffff95e1f64511a8 ..E.......E..... ffff95e1f64511b8: ffff95e77cf509a0 ffff95e77cf509a0 ...|.......|.... ffff95e1f64511c8: ffff95e1f64511c8 ffff95e1f64511c8 ..E.......E..... crash> rd ffff95e5ff621178 10 ffff95e5ff621178: 0000000000000001 ffff95e15936aa00 ..........6Y.... ffff95e5ff621188: 0000000000000000 00000000ffffffff ................ ffff95e5ff621198: 00000000000000a0 0000000000000010 ................ ffff95e5ff6211a8: ffff95e5ff621198 000000000000000c ..b............. ffff95e5ff6211b8: 00000f5800000000 ffff95e751f8d720 ....X... ..Q.... ffff95e5ff621178 belongs to freed mempool object at ffff95e5ff621080. CACHE NAME OBJSIZE ALLOCATED TOTAL SLABS SSIZE ffff95dc7fd74d00 mnt_cache 384 19785 24948 594 16k SLAB MEMORY NODE TOTAL ALLOCATED FREE ffffdc5dabfd8800 ffff95e5ff620000 1 42 29 13 FREE / [ALLOCATED] ffff95e5ff621080 (cpu 6 cache) Examining the contents of that memory reveals a pointer to a constant string in the driver, "abort\0", which is set by qla24xx_async_abort_cmd(). crash> rd ffffffffc059277c 20 ffffffffc059277c: 6e490074726f6261 0074707572726574 abort.Interrupt. ffffffffc059278c: 00676e696c6c6f50 6920726576697244 Polling.Driver i ffffffffc059279c: 646f6d207325206e 6974736554000a65 n %s mode..Testi ffffffffc05927ac: 636976656420676e 786c252074612065 ng device at %lx ffffffffc05927bc: 6b63656843000a2e 646f727020676e69 ...Checking prod ffffffffc05927cc: 6f20444920746375 0a2e706968632066 uct ID of chip.. ffffffffc05927dc: 5120646e756f4600 204130303232414c .Found QLA2200A ffffffffc05927ec: 43000a2e70696843 20676e696b636568 Chip...Checking ffffffffc05927fc: 65786f626c69616d 6c636e69000a2e73 mailboxes...incl ffffffffc059280c: 756e696c2f656475 616d2d616d642f78 ude/linux/dma-ma crash> struct -ox srb_iocb struct srb_iocb { union { struct {...} logio; struct {...} els_logo; struct {...} tmf; struct {...} fxiocb; struct {...} abt; struct ct_arg ctarg; struct {...} mbx; struct {...} nack; [0x0 ] } u; [0xb8] struct timer_list timer; [0x108] void (*timeout)(void *); } SIZE: 0x110 crash> ! bc ibase=16 obase=10 B8+40 F8 The object is a srb_t, and at offset 0xf8 within that structure (i.e. ffff95e5ff621080 + f8 -> ffff95e5ff621178) is a struct timer_list. Cc: <stable@vger.kernel.org> #4.4+ Fixes: 4440e46d5db7 ("[SCSI] qla2xxx: Add IOCB Abort command asynchronous handling.") Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-18drm/i915: Try EDID bitbanging on HDMI after failed readStefan Brüns
commit 90024a5951029685acc5396258f1b0de9b23cf4a upstream. The ACK/NACK implementation as found in e.g. the G965 has the falling clock edge and the release of the data line after the ACK for the received byte happen at the same time. This is conformant with the I2C specification, which allows a zero hold time, see footnote [3]: "A device must internally provide a hold time of at least 300 ns for the SDA signal (with respect to the V IH(min) of the SCL signal) to bridge the undefined region of the falling edge of SCL." Some HDMI-to-VGA converters apparently fail to adhere to this requirement and latch SDA at the falling clock edge, so instead of an ACK sometimes a NACK is read and the slave (i.e. the EDID ROM) ends the transfer. The bitbanging releases the data line for the ACK only 1/4 bit time after the falling clock edge, so a slave will see the correct value no matter if it samples at the rising or the falling clock edge or in the center. Fallback to bitbanging is already done for the CRT connector. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=92685 Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de> Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/a39f080b-81a5-4c93-b3f7-7cb0a58daca3@rwthex-w2-a.rwth-ad.de (cherry picked from commit cfb926e148e99acc02351d72e8b85e32b5f786ef) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-18RDMA/mlx5: Fix integer overflow while resizing CQLeon Romanovsky
commit 28e9091e3119933c38933cb8fc48d5618eb784c8 upstream. The user can provide very large cqe_size which will cause to integer overflow as it can be seen in the following UBSAN warning: ======================================================================= UBSAN: Undefined behaviour in drivers/infiniband/hw/mlx5/cq.c:1192:53 signed integer overflow: 64870 * 65536 cannot be represented in type 'int' CPU: 0 PID: 267 Comm: syzkaller605279 Not tainted 4.15.0+ #90 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.7.5-0-ge51488c-20140602_164612-nilsson.home.kraxel.org 04/01/2014 Call Trace: dump_stack+0xde/0x164 ? dma_virt_map_sg+0x22c/0x22c ubsan_epilogue+0xe/0x81 handle_overflow+0x1f3/0x251 ? __ubsan_handle_negate_overflow+0x19b/0x19b ? lock_acquire+0x440/0x440 mlx5_ib_resize_cq+0x17e7/0x1e40 ? cyc2ns_read_end+0x10/0x10 ? native_read_msr_safe+0x6c/0x9b ? cyc2ns_read_end+0x10/0x10 ? mlx5_ib_modify_cq+0x220/0x220 ? sched_clock_cpu+0x18/0x200 ? lookup_get_idr_uobject+0x200/0x200 ? rdma_lookup_get_uobject+0x145/0x2f0 ib_uverbs_resize_cq+0x207/0x3e0 ? ib_uverbs_ex_create_cq+0x250/0x250 ib_uverbs_write+0x7f9/0xef0 ? cyc2ns_read_end+0x10/0x10 ? print_irqtrace_events+0x280/0x280 ? ib_uverbs_ex_create_cq+0x250/0x250 ? uverbs_devnode+0x110/0x110 ? sched_clock_cpu+0x18/0x200 ? do_raw_spin_trylock+0x100/0x100 ? __lru_cache_add+0x16e/0x290 __vfs_write+0x10d/0x700 ? uverbs_devnode+0x110/0x110 ? kernel_read+0x170/0x170 ? sched_clock_cpu+0x18/0x200 ? security_file_permission+0x93/0x260 vfs_write+0x1b0/0x550 SyS_write+0xc7/0x1a0 ? SyS_read+0x1a0/0x1a0 ? trace_hardirqs_on_thunk+0x1a/0x1c entry_SYSCALL_64_fastpath+0x1e/0x8b RIP: 0033:0x433549 RSP: 002b:00007ffe63bd1ea8 EFLAGS: 00000217 ======================================================================= Cc: syzkaller <syzkaller@googlegroups.com> Cc: <stable@vger.kernel.org> # 3.13 Fixes: bde51583f49b ("IB/mlx5: Add support for resize CQ") Reported-by: Noa Osherovich <noaos@mellanox.com> Reviewed-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-18RDMA/ucma: Check that user doesn't overflow QP stateLeon Romanovsky
commit a5880b84430316e3e1c1f5d23aa32ec6000cc717 upstream. The QP state is limited and declared in enum ib_qp_state, but ucma user was able to supply any possible (u32) value. Reported-by: syzbot+0df1ab766f8924b1edba@syzkaller.appspotmail.com Fixes: 75216638572f ("RDMA/cma: Export rdma cm interface to userspace") Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-18RDMA/ucma: Limit possible option sizeLeon Romanovsky
commit 6a21dfc0d0db7b7e0acedce67ca533a6eb19283c upstream. Users of ucma are supposed to provide size of option level, in most paths it is supposed to be equal to u8 or u16, but it is not the case for the IB path record, where it can be multiple of struct ib_path_rec_data. This patch takes simplest possible approach and prevents providing values more than possible to allocate. Reported-by: syzbot+a38b0e9f694c379ca7ce@syzkaller.appspotmail.com Fixes: 7ce86409adcd ("RDMA/ucma: Allow user space to set service type") Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-11s390/qeth: fix IPA command submission raceJulian Wiedmann
[ Upstream commit d22ffb5a712f9211ffd104c38fc17cbfb1b5e2b0 ] If multiple IPA commands are build & sent out concurrently, fill_ipacmd_header() may assign a seqno value to a command that's different from what send_control_data() later assigns to this command's reply. This is due to other commands passing through send_control_data(), and incrementing card->seqno.ipa along the way. So one IPA command has no reply that's waiting for its seqno, while some other IPA command has multiple reply objects waiting for it. Only one of those waiting replies wins, and the other(s) times out and triggers a recovery via send_ipa_cmd(). Fix this by making sure that the same seqno value is assigned to a command and its reply object. Do so immediately before submitting the command & while holding the irq_pending "lock", to produce nicely ascending seqnos. As a side effect, *all* IPA commands now use a reply object that's waiting for its actual seqno. Previously, early IPA commands that were submitted while the card was still DOWN used the "catch-all" IDX seqno. Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-11s390/qeth: fix IP address lookup for L3 devicesJulian Wiedmann
[ Upstream commit c5c48c58b259bb8f0482398370ee539d7a12df3e ] Current code ("qeth_l3_ip_from_hash()") matches a queried address object against objects in the IP table by IP address, Mask/Prefix Length and MAC address ("qeth_l3_ipaddrs_is_equal()"). But what callers actually require is either a) "is this IP address registered" (ie. match by IP address only), before adding a new address. b) or "is this address object registered" (ie. match all relevant attributes), before deleting an address. Right now 1. the ADD path is too strict in its lookup, and eg. doesn't detect conflicts between an existing NORMAL address and a new VIPA address (because the NORMAL address will have mask != 0, while VIPA has a mask == 0), 2. the DELETE path is not strict enough, and eg. allows del_rxip() to delete a VIPA address as long as the IP address matches. Fix all this by adding helpers (_addr_match_ip() and _addr_match_all()) that do the appropriate checking. Note that the ADD path for NORMAL addresses is special, as qeth keeps track of how many times such an address is in use (and there is no immediate way of returning errors to the caller). So when a requested NORMAL address _fully_ matches an existing one, it's not considered a conflict and we merely increment the refcount. Fixes: 5f78e29ceebf ("qeth: optimize IP handling in rx_mode callback") Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-11s390/qeth: fix double-free on IP add/remove raceJulian Wiedmann
[ Upstream commit 14d066c3531a87f727968cacd85bd95c75f59843 ] Registering an IPv4 address with the HW takes quite a while, so we temporarily drop the ip_htable lock. Any concurrent add/remove of the same IP adjusts the IP's use count, and (on remove) is then blocked by addr->in_progress. After the register call has completed, we check the use count for concurrently attempted add/remove calls - and possibly straight-away deregister the IP again. This happens via l3_delete_ip(), which 1) looks up the queried IP in the htable (getting a reference to the *same* queried object), 2) deregisters the IP from the HW, and 3) frees the IP object. The caller in l3_add_ip() then does a second free on the same object. For this case, skip all the extra checks and lookups in l3_delete_ip() and just deregister & free the IP object ourselves. Fixes: 5f78e29ceebf ("qeth: optimize IP handling in rx_mode callback") Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-11s390/qeth: fix IP removal on offline cardsJulian Wiedmann
[ Upstream commit 98d823ab1fbdcb13abc25b420f9bb71bade42056 ] If the HW is not reachable, then none of the IPs in qeth's internal table has been registered with the HW yet. So when deleting such an IP, there's no need to stage it for deregistration - just drop it from the table. This fixes the "add-delete-add" scenario on an offline card, where the the second "add" merely increments the IP's use count. But as the IP is still set to DISP_ADDR_DELETE from the previous "delete" step, l3_recover_ip() won't register it with the HW when the card goes online. Fixes: 5f78e29ceebf ("qeth: optimize IP handling in rx_mode callback") Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-11s390/qeth: fix overestimated count of buffer elementsJulian Wiedmann
[ Upstream commit 12472af89632beb1ed8dea29d4efe208ca05b06a ] qeth_get_elements_for_range() doesn't know how to handle a 0-length range (ie. start == end), and returns 1 when it should return 0. Such ranges occur on TSO skbs, where the L2/L3/L4 headers (and thus all of the skb's linear data) are skipped when mapping the skb into regular buffer elements. This overestimation may cause several performance-related issues: 1. sub-optimal IO buffer selection, where the next buffer gets selected even though the skb would actually still fit into the current buffer. 2. forced linearization, if the element count for a non-linear skb exceeds QETH_MAX_BUFFER_ELEMENTS. Rather than modifying qeth_get_elements_for_range() and adding overhead to every caller, fix up those callers that are in risk of passing a 0-length range. Fixes: 2863c61334aa ("qeth: refactor calculation of SBALE count") Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-11s390/qeth: fix SETIP command handlingJulian Wiedmann
[ Upstream commit 1c5b2216fbb973a9410e0b06389740b5c1289171 ] send_control_data() applies some special handling to SETIP v4 IPA commands. But current code parses *all* command types for the SETIP command code. Limit the command code check to IPA commands. Fixes: 5b54e16f1a54 ("qeth: do not spin for SETIP ip assist command") Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-11s390/qeth: fix underestimated count of buffer elementsUrsula Braun
[ Upstream commit 89271c65edd599207dd982007900506283c90ae3 ] For a memory range/skb where the last byte falls onto a page boundary (ie. 'end' is of the form xxx...xxx001), the PFN_UP() part of the calculation currently doesn't round up to the next PFN due to an off-by-one error. Thus qeth believes that the skb occupies one page less than it actually does, and may select a IO buffer that doesn't have enough spare buffer elements to fit all of the skb's data. HW detects this as a malformed buffer descriptor, and raises an exception which then triggers device recovery. Fixes: 2863c61334aa ("qeth: refactor calculation of SBALE count") Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.0.4) at 2024-05-29 19:46:37 +0000