summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2008-02-08drm: the drm really should call pci_set_master..Dave Airlie
(submitted upstream as 19a8f59ab8ceee751ea720085098355d53f727d6) perhaps bonghits could turn on my bus-mastering because the drm certainly never bothered doing it before. Signed-off-by: Dave Airlie <airlied@linux.ie> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-08Driver core: Revert "Fix Firmware class name collision"Michael E Brown
patch 7d640c4a5b36c4733460065db1554da924044511 in mainline. This reverts commit 109f0e93b6b728f03c1eb4af02bc25d71b646c59. The original patch breaks BIOS updates on all Dell machines. The path to the firmware file for the dell_rbu driver changes, which breaks all of the userspace tools which rely on it. Note that this patch re-introduces a problem with i2c name collision that was previously fixed by this patch. Signed-off-by: Michael E Brown <michael_e_brown@dell.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-08b43: Reject new firmware earlyMichael Buesch
(not in mainline, as it is not applicable.) We must reject new incompatible firmware early to avoid running into strange transmission failures. The current development tree supports newer firmware revisions. These revisions cause strange failures on the stable 2.6.24 kernel. Add a check to avoid confusing users a lot. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-08b43legacy: fix DMA slot resource leakageStefano Brivio
patch 8dd0100ce9511e52614ecd0a6587c13ce5769c8b in mainline. This fixes four resource leakages. In any error path we must deallocate the DMA frame slots we previously allocated by request_slot(). This is done by storing the ring pointers before doing any ring allocation and restoring the old pointers in case of an error. This patch by Michael Buesch has been ported to b43legacy. Cc: Michael Buesch <mb@bu3sch.de> Signed-off-by: Stefano Brivio <stefano.brivio@polimi.it> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-08b43legacy: drop packets we are not able to encryptStefano Brivio
patch 9eca9a8e81928685b4de00ecef83a7c13c340fc9 in mainline. We must drop any packets we are not able to encrypt. We must not send them unencrypted or with an all-zero-key (which basically is the same as unencrypted, from a security point of view). This might only trigger shortly after resume before mac80211 reassociated and reconfigured the keys. It is safe to drop these packets, as the association they belong to is not guaranteed anymore anyway. This is a security fix in the sense that it prevents information leakage. This patch by Michael Buesch has been ported to b43legacy. Cc: Michael Buesch <mb@bu3sch.de> Signed-off-by: Stefano Brivio <stefano.brivio@polimi.it> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-08b43legacy: fix suspend/resumeStefano Brivio
patch ada50731c0346bf900dc387edd3a6961297bf2d3 in mainline. This patch makes suspend/resume work with the b43legacy driver. We must not overwrite the MAC addresses in the init function, as this would also overwrite the MAC on resume. With an all-zero MAC the device firmware is not able to ACK any received packets anymore. Fix this by moving the initializion stuff that must be done on init but not on resume to the start function. Also zero out filter_flags to make sure we don't have some flags from a previous instance for a tiny timeframe until mac80211 reconfigures them. This patch by Michael Buesch has been ported to b43legacy. Cc: Michael Buesch <mb@bu3sch.de> Signed-off-by: Stefano Brivio <stefano.brivio@polimi.it> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-08b43legacy: fix PIO crashStefano Brivio
patch 0cd67d48b519c3d8d89d238fab1cf68a5289638a in mainline. Fix the crash reported below, which seems to happen on bcm4306 rev. 2 devices only while using PIO: Oops: 0000 [#1] PREEMPT Modules linked in: b43(F) rfkill(F) led_class(F) input_polldev(F) arc4 b43legacy mac80211 cfg80211 i915 drm snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device ohci1394 ieee1394 ssb pcmcia snd_intel8x0m ehci_hcd uhci_hcd evdev Pid: 0, comm: swapper Tainted: GF (2.6.24st3 #2) EIP: 0060:[<f90f667b>] EFLAGS: 00010002 CPU: 0 EIP is at b43legacy_pio_handle_txstatus+0xbb/0x210 [b43legacy] EAX: 0000049b EBX: f11f8044 ECX: 00000001 EDX: 00000000 ESI: f1ff8000 EDI: 00000000 EBP: f11f8040 ESP: c04f4ef4 DS: 007b ES: 007b FS: 0000 GS: 0000 SS: 0068 Process swapper (pid: 0, ti=c04f4000 task=c0488300 task.ti=c04b8000) Stack: f90f2788 c05009f0 c0500900 000010f7 f1053823 c04f4f24 dfb8e800 00000003 f1368000 00000007 00000296 f90f1975 00001000 010c0800 01000000 00000007 f90f6391 f11f8000 00000082 c04f4f4a 00000000 00004fd0 10f70000 8c061000 Call Trace: [<f90f2788>] b43legacy_debugfs_log_txstat+0x48/0xb0 [b43legacy] [<f90f1975>] b43legacy_handle_hwtxstatus+0x75/0x80 [b43legacy] [<f90f6391>] b43legacy_pio_rx+0x201/0x280 [b43legacy] [<f90e4fa3>] b43legacy_interrupt_tasklet+0x2e3/0x870 [b43legacy] [<c0123567>] tasklet_action+0x27/0x60 [<c01237b4>] __do_softirq+0x54/0xb0 [<c010686b>] do_softirq+0x7b/0xe0 [<c01457c0>] handle_level_irq+0x0/0x110 [<c01457c0>] handle_level_irq+0x0/0x110 [<c0123758>] irq_exit+0x38/0x40 [<c0106953>] do_IRQ+0x83/0xd0 [<c011812f>] __update_rq_clock+0x4f/0x180 [<c0104b4f>] common_interrupt+0x23/0x28 [<c011007b>] wakeup_code+0x7b/0xde [<c02b1039>] acpi_processor_idle+0x24a/0x3c9 [<c01025c7>] cpu_idle+0x47/0x80 [<c04b9ad5>] start_kernel+0x205/0x290 [<c04b9360>] unknown_bootoption+0x0/0x1f0 ======================= Code: 0f 00 00 81 fb ff 00 00 00 0f 87 36 01 00 00 8d 04 db 85 ff 8d 6c c6 40 8d 5d 04 0f 85 ef 00 00 00 fe 4e 0e 0f b7 46 0c 8b 53 04 <8b> 4a 50 29 c8 83 e8 52 66 89 46 0c 8b 54 24 14 80 7a 0b 00 74 EIP: [<f90f667b>] b43legacy_pio_handle_txstatus+0xbb/0x210 [b43legacy] SS:ESP 0068:c04f4ef4 Kernel panic - not syncing: Fatal exception in interrupt Signed-off-by: Stefano Brivio <stefano.brivio@polimi.it> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-08b43: Fix dma-slot resource leakageMichael Buesch
patch 8dd0100ce9511e52614ecd0a6587c13ce5769c8b in mainline. This fixes four resource leakages. In any error path we must deallocate the DMA frame slots we previously allocated by request_slot(). This is done by storing the ring pointers before doing any ring allocation and restoring the old pointers in case of an error. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: Stefano Brivio <stefano.brivio@polimi.it> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-08b43: Drop packets we are not able to encryptMichael Buesch
patch 09552ccd8277e6382097e93a40f7311a09449367 in mainline We must drop any packets we are not able to encrypt. We must not send them unencrypted or with an all-zero-key (which basically is the same as unencrypted, from a security point of view). This might only trigger shortly after resume before mac80211 reassociated and reconfigured the keys. It is safe to drop these packets, as the association they belong to is not guaranteed anymore anyway. This is a security fix in the sense that it prevents information leakage. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-08b43: Fix suspend/resumeMichael Buesch
patch 7be1bb6b798d506693d2d8668e801951996b5a4a in mainline. This patch makes suspend/resume work with the b43 driver. We must not overwrite the MAC addresses in the init function, as this would also overwrite the MAC on resume. With an all-zero MAC the device firmware is not able to ACK any received packets anymore. Fix this by moving the initializion stuff that must be done on init but not on resume to the start function. Also zero out filter_flags to make sure we don't have some flags from a previous instance for a tiny timeframe until mac80211 reconfigures them. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-08sky2: fix for WOL on some devicesStephen Hemminger
patch 82637e808478087ce861129745fa60cc37e7929d in mainline This patch disables config mode access after clearing PCI settings. Without this change WOL won't work on some BIOS's Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-08sky2: restore multicast addresses after recoveryStephen Hemminger
patch a7bffe722c996679b4fb2103ecaf673ec2b9b4a7 in mainline. If the sky2 deadman timer forces a recovery, the multicast hash list is lost. Move the call to sky2_set_multicast to the end of sky2_up() so all paths that bring device up will restore multicast. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-08ACPI: update ACPI blacklistLen Brown
These minor changes sync the latest ACPI blacklist into 2.6.24. The main benefit of this patch is to make any future changes easier to apply. The immediate benefit is one less dmesg line on Acer systems. Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-08PCI: Fix fakephp deadlockIan Abbott
This patch works around a problem in the fakephp driver when a process writing "0" to a "power" sysfs file to fake removal of a PCI device ends up deadlocking itself in the sysfs code. The patch was recently accepted into Linus' tree after the 2.6.24 release: http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commitdiff;h=5c796ae7a7ebe56967ed9b9963d7c16d733635ff Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-08forcedeth: mac address mcp77/79Ayaz Abdulla
patch 2b91213064bd882c3adf35f028c6d12fab3269ec in mainline. This patch is a critical fix for MCP77 and MCP79 devices. The feature flags were missing the define for correct mac address (DEV_HAS_CORRECT_MACADDR). Signed-off-by: Ayaz Abdulla <aabdulla@nvidia.com> Signed-off-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-08USB: Fix usb_serial_driver structure for Kobil cardreader driver.Stefan Bader
The device setup did miss to initialize the num_interrupt_out field, thus failing to successfully complete the probe function. Signed-off-by: Stefan Bader <stefan.bader@canonical.com> Cc: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-08USB: handle idVendor of 0x0000Greg Kroah-Hartman
Some crazy devices in the wild have a vendor id of 0x0000. If we try to add a module alias with this id, we just can't do it due to a check in the file2alias.c file. Change the test to verify that both the vendor and product ids are 0x0000 to show a real "blank" module alias. Note, the module-init-tools package also needs to be changed to properly generate the depmod tables. Cc: Janusz <janumix@poczta.fm> Cc: Jon Masters <jcm@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-08USB: fix usbtest halt check on big endian systemsJan Andersson
usbtest did not swap the received status information when checking for a non-zero value and failed to discover halted endpoints on big endian systems. Signed-off-by: Jan Andersson <jan@gaisler.com> Acked-by: David Brownell <david-b@pacbell.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-08USB: storage: Add unusual_dev for HP r707Grant Grundler
Add "FIX_CAPACITY" entry for HP Photosmart r707 Camera in "Disk" mode. Camera will wedge when /lib/udev/vol_id attempts to access the last sector, EIO gets reported to dmesg, and block device is marked "offline" (it is). Reproduced vol_id behavior with: "dd if=/dev/sda of=/dev/null skip=60800 count=1" Signed-off-by: Grant Grundler <grundler@parisc-linux.org> Signed-off-by: Phil Dibowitz <phil@ipom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-08USB: Variant of the Dell Wireless 5520 driverNate Carlson
I've got a Dell wireless 5520 card with a different USB ID - specifically, 8136 instead of 8137. Attached a small patch to add support, and the output of an 'ati3'. If we could get this in, that'd be sweet. ;) Thanks! nc@knight:~/tmp/linux-2.6.24-rc8/drivers/usb/serial$ lsusb | grep 8136 Bus 001 Device 005: ID 413c:8136 Dell Computer Corp. nc@knight:~/tmp/linux-source-2.6.23/drivers/usb/serial$ cu -l ttyUSB0 -s 115200 Connected. ati3 Manufacturer: Novatel Wireless Incorporated Model: Expedite EU860D MiniCard Revision: 10.10.04.01-01 [2007-04-11 14:07:19] IMEI: 011186000228043 +GCAP: +CGSM,+DS,+ES From: Nate Carlson <natecars@natecarlson.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-08USB: use GFP_NOIO in reset pathOliver Neukum
this function will run in the context of the scsi error handler thread. It must use GFP_NOIO instead of GFP_KERNEL to avoid a possible deadlock. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-08USB: ftdi driver - add support for optical probe deviceEd Beroset
Added support for the Elster Unicom III Optical Probe. The device ID has already been added to the usb.ids file. Signed-off-by: Ed Beroset <beroset@mindspring.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-08USB: pl2303: add support for RATOC REX-USB60FAkira Tsukamoto
pl2303: add support for RATOC REX-USB60F This patch adds support for RATOC REX-USB60F Serial Adapters, which is widely used in Japan recently. Signed-off-by: Akira Tsukamoto <akirat@rd.scei.sony.co.jp> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-08USB: remove duplicate entry in Option driver and Pl2303 driver for Huawei modemDaniel Kozák
Remove entry for Huawei E620 UMTS/HSDPA card (ID: 12d1:1001) in pl2303 driver Option driver is use instead Signed-off-by: Daniel Kozák <kozzi11@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-08USB: sierra: add support for Onda H600/Zte MF330 datacard to USB Driver for ↵Bruno Redondi
Sierra Wireless Added support for Onda H600/Zte MF330 GPRS/UMTS/HSDPA datacard Signed-off-by: Bruno Redondi <bruno.redondi@altarisoluzione.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-08USB: ftdi-sio: Patch to add vendor/device id for ATK_16IC CCDFranco Lanza
little patches only to add vendor/device id of ATK_16IC CCD cam for astronomy. From: Franco Lanza <nextime@nexlab.it> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-08USB: ftdi_sio - enabling multiple ELV devices, adding EM1010PCPeter Stark
I work with a group of people on a free home automation tool called FHEM. Some of the users own more than one USB-serial device by ELV. The ftdi_sio driver has most of the ELV devices disabled by default and needs to be re-enabled every time you get a new kernel. Additionally a new device (EM 1010 PC - enegry monitor) is missing in the list. Currently our users have to follow the instructions we provide at http://www.koeniglich.de/fhem/linux.html ... However, to some users it is too complicated to compile their own kernel module. We are aware that you can specify one additional device using the vendor/product option of the module. But lot's of users own more than one device. Signed-off-by: Peter Stark <peter.stark@t-online.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-08USB: sierra driver - add devicesKevin Lloyd
The following improvements were made: - Added new product support: MC5725, AC 880 U, MP 3G (UMTS & CDMA) Signed-off-by: Kevin Lloyd <linux@sierrawireless.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-08USB: Adding YC Cable USB Serial device to pl2303Damien Stuart
This simply adds the "YC Cable" as a vendor and its pl2303-based USB<->Serial adapter as a product. This particular adapter is sold by Radio Shack. I've done limited testing on a few different systems with no issues. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-08USB: Sierra - Add support for Aircard 881UJessica L. Blank
Adds the appropriate vendor and device IDs for the AirCard 881U to sierra.c. (This device is often rebadged by AT&T as the USBConnect 881). Signed-off-by: Jessica L Blank <j@twu.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-08USB: add support for 4348:5523 WinChipHead USB->RS 232 adapterPiotr Roszatycki
add support for: 4348:5523 WinChipHead USB->RS 232 adapter with Prolifec PL 2303 chipset [ mingo@elte.hu: merged it and nursed it upstream ] Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-08USB: CP2101 New Device IDsCraig Shelley
Six new device IDs for CP2101 driver. Signed-off-by: Craig Shelley <craig@microtron.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-08usb gadget: fix fsl_usb2_udc potential OOPSLi Yang
For fsl_usb2_udc driver, ep0 also has a descriptor. Current code is misleading and contains a logical mistake. Here is the patch to fix it. http://bugzilla.kernel.org/show_bug.cgi?id=9595 Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-08USB: keyspan: Fix oopsAlan Cox
If we get a data URB back from the hardware after we have put the tty to bed we go kaboom. Fortunately all we need to do is process the URB without trying to ram its contents down the throat of an ex-tty. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-08vm audit: add VM_DONTEXPAND to mmap for drivers that need it (CVE-2008-0007)Nick Piggin
Drivers that register a ->fault handler, but do not range-check the offset argument, must set VM_DONTEXPAND in the vm_flags in order to prevent an expanding mremap from overflowing the resource. I've audited the tree and attempted to fix these problems (usually by adding VM_DONTEXPAND where it is not obvious). Signed-off-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-08DVB: cx23885: add missing subsystem ID for Hauppauge HVR1800 RetailMichael Krufky
[PATCH] DVB: cx23885: add missing subsystem ID for Hauppauge HVR1800 Retail Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Chris Wright <chrisw@sous-sol.org>
2008-01-24spi: omap2_mcspi PIO RX fixKalle Valo
Before transmission of the last word in PIO RX_ONLY mode rx+tx mode is enabled: /* prevent last RX_ONLY read from triggering * more word i/o: switch to rx+tx */ if (c == 0 && tx == NULL) mcspi_write_cs_reg(spi, OMAP2_MCSPI_CHCONF0, l); But because c is decremented after the test, c will never be zero and rx+tx will not be enabled. This breaks RX_ONLY mode PIO transfers. Fix it by decrementing c in the beginning of the various I/O loops. Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-01-24Merge branch 'release' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6 * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: Revert "ACPI: Fan: Drop force_power_state acpi_device option" ACPI: EC: "DEBUG" needs to be defined earlier ACPI: EC: add leading zeros to debug messages ACPI: EC: fix dmesg spam regression ACPI: DMI blacklist to reduce console warnings on OSI(Linux) systems. ACPI: Add ThinkPad R61, ThinkPad T61 to OSI(Linux) white-list ACPI: make _OSI(Linux) console messages smarter ACPI: Delete Intel Customer Reference Board (CRB) from OSI(Linux) DMI list ACPI: on OSI(Linux), print needed DMI rather than requesting dmidecode output ACPI: create acpi_dmi_dump() DMI: create dmi_get_slot() DMI: move dmi_available declaration to linux/dmi.h ACPI: processor: Fix null pointer dereference in throttling
2008-01-23Pull dmi-2.6.24 into release branchLen Brown
2008-01-23Pull bugzilla-9798 into release branchLen Brown
2008-01-23Pull bugzilla-8459 into release branchLen Brown
2008-01-23Pull bugzilla-9747 into release branchLen Brown
2008-01-23Revert "ACPI: Fan: Drop force_power_state acpi_device option"Len Brown
This reverts commit 93ad7c07ad487b036add8760dabcc35666a550ef. http://bugzilla.kernel.org/show_bug.cgi?id=9798 Signed-off-by: Len Brown <len.brown@intel.com>
2008-01-23ACPI: EC: "DEBUG" needs to be defined earlierMárton Németh
The "DEBUG" symbol needs to be defined before #including <linux/kernel.h> to get the pr_debug() working. Signed-off-by: Márton Németh <nm127@freemail.hu> Signed-off-by: Len Brown <len.brown@intel.com>
2008-01-23ACPI: EC: add leading zeros to debug messagesMárton Németh
Add leading zeros to pr_debug() calls. For example if x=0x0a, the format "0x%2x" will result the string "0x a", the format "0x%2.2x" will result "0x0a". Signed-off-by: Márton Németh <nm127@freemail.hu> Signed-off-by: Len Brown <len.brown@intel.com>
2008-01-23ACPI: EC: fix dmesg spam regressionAlexey Starikovskiy
Return OBF_1 optimization workaround http://bugzilla.kernel.org/show_bug.cgi?id=8459 Signed-off-by: Alexey Starikovskiy <astarikovskiy@suse.de> Signed-off-by: Len Brown <len.brown@intel.com>
2008-01-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6: [SPARC]: Constify function pointer tables. [SPARC64]: Fix section error in sparcspkr [SPARC64]: Fix of section mismatch warnings.
2008-01-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: sis190: scheduling while atomic error sis190: mdio operation failure is not correctly detected sis190: remove duplicate INIT_WORK sis190: add cmos ram access code for the SiS19x/968 chipset pair [INET]: Fix truesize setting in ip_append_data [NETNS]: Re-export init_net via EXPORT_SYMBOL. iwlwifi: fix possible read attempt on ucode that is not available [IPV4]: Add missing skb->truesize increment in ip_append_page(). [TULIP] DMFE: Fix SROM parsing regression. [BLUETOOTH]: Move children of connection device to NULL before connection down.
2008-01-23ACPI: DMI blacklist to reduce console warnings on OSI(Linux) systems.Len Brown
This DMI blacklist reduces the console messages on systems which have a BIOS that invokes OSI(Linux). As the DMI blacklist already knows about these systems, the request for DMI info itself is disabled. Further, if OSI(Linux) has already been determined to have no beneift, we disable the console message requesting acpi_osi=Linux test results. Signed-off-by: Len Brown <len.brown@intel.com>
2008-01-23ACPI: Add ThinkPad R61, ThinkPad T61 to OSI(Linux) white-listLen Brown
acpi_osi=Linux helps sound on these systems. Signed-off-by: Len Brown <len.brown@intel.com>
generated by cgit v1.2.3 (git 2.0.4) at 2024-06-24 11:00:53 +0000