summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2015-07-10KVM: s390: virtio-ccw: don't overwrite config space valuesCornelia Huck
commit 431dae778aea4eed31bd12e5ee82edc571cd4d70 upstream. Eric noticed problems with vhost-scsi and virtio-ccw: vhost-scsi complained about overwriting values in the config space, which was triggered by a broken implementation of virtio-ccw's config get/set routines. It was probably sheer luck that we did not hit this before. When writing a value to the config space, the WRITE_CONF ccw will always write from the beginning of the config space up to and including the value to be set. If the config space up to the value has not yet been retrieved from the device, however, we'll end up overwriting values. Keep track of the known config space and update if needed to avoid this. Moreover, READ_CONF will only read the number of bytes it has been instructed to retrieve, so we must not copy more than that to the buffer, or we might overwrite trailing values. Reported-by: Eric Farman <farman@linux.vnet.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: Eric Farman <farman@linux.vnet.ibm.com> Tested-by: Eric Farman <farman@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-07-10tick/idle/powerpc: Do not register idle states with CPUIDLE_FLAG_TIMER_STOP ↵preeti
set in periodic mode commit cc5a2f7b8f39e7db559778f7913a2410257b3e50 upstream. On some archs, the local clockevent device stops in deep cpuidle states. The broadcast framework is used to wakeup cpus in these idle states, in which either an external clockevent device is used to send wakeup ipis or the hrtimer broadcast framework kicks in in the absence of such a device. One cpu is nominated as the broadcast cpu and this cpu sends wakeup ipis to sleeping cpus at the appropriate time. This is the implementation in the oneshot mode of broadcast. In periodic mode of broadcast however, the presence of such cpuidle states results in the cpuidle driver calling tick_broadcast_enable() which shuts down the local clockevent devices of all the cpus and appoints the tick broadcast device as the clockevent device for each of them. This works on those archs where the tick broadcast device is a real clockevent device. But on archs which depend on the hrtimer mode of broadcast, the tick broadcast device hapens to be a pseudo device. The consequence is that the local clockevent devices of all cpus are shutdown and the kernel hangs at boot time in periodic mode. Let us thus not register the cpuidle states which have CPUIDLE_FLAG_TIMER_STOP flag set, on archs which depend on the hrtimer mode of broadcast in periodic mode. This patch takes care of doing this on powerpc. The cpus would not have entered into such deep cpuidle states in periodic mode on powerpc anyway. So there is no loss here. Signed-off-by: Preeti U Murthy <preeti@linux.vnet.ibm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-07-10intel_pstate: set BYT MSR with wrmsrl_on_cpu()Joe Konno
commit 0dd23f94251f49da99a6cbfb22418b2d757d77d6 upstream. Commit 007bea098b86 (intel_pstate: Add setting voltage value for baytrail P states.) introduced byt_set_pstate() with the assumption that it would always be run by the CPU whose MSR is to be written by it. It turns out, however, that is not always the case in practice, so modify byt_set_pstate() to enforce the MSR write done by it to always happen on the right CPU. Fixes: 007bea098b86 (intel_pstate: Add setting voltage value for baytrail P states.) Signed-off-by: Joe Konno <joe.konno@intel.com> Acked-by: Kristen Carlson Accardi <kristen@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-07-10mmc: sdhci: fix low memory corruptionJiri Slaby
commit 62a7f368ffbc13d9aedfdd7aeae711b177db69ac upstream. When dma mapping (dma_map_sg) fails in sdhci_pre_dma_transfer, -EINVAL is returned. There are 3 callers of sdhci_pre_dma_transfer: * sdhci_pre_req and sdhci_adma_table_pre: handle negative return * sdhci_prepare_data: handles 0 (error) and "else" (good) only sdhci_prepare_data is therefore broken. When it receives -EINVAL from sdhci_pre_dma_transfer, it assumes 1 sg mapping was mapped. Later, this non-existent mapping with address 0 is kmap'ped and written to: Corrupted low memory at ffff880000001000 (1000 phys) = 22b7d67df2f6d1cf Corrupted low memory at ffff880000001008 (1008 phys) = 63848a5216b7dd95 Corrupted low memory at ffff880000001010 (1010 phys) = 330eb7ddef39e427 Corrupted low memory at ffff880000001018 (1018 phys) = 8017ac7295039bda Corrupted low memory at ffff880000001020 (1020 phys) = 8ce039eac119074f ... So teach sdhci_prepare_data to understand negative return values from sdhci_pre_dma_transfer and disable DMA in that case, as well as for zero. It was introduced in 348487cb28e66b032bae1b38424d81bf5b444408 (mmc: sdhci: use pipeline mmc requests to improve performance). The commit seems to be suspicious also by assigning host->sg_count both in sdhci_pre_dma_transfer and sdhci_adma_table_pre. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Fixes: 348487cb28e6 Cc: Ulf Hansson <ulf.hansson@linaro.org> Cc: Haibo Chen <haibo.chen@freescale.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-07-10iommu/amd: Handle large pages correctly in free_pagetableJoerg Roedel
commit 0b3fff54bc01e8e6064d222a33e6fa7adabd94cd upstream. Make sure that we are skipping over large PTEs while walking the page-table tree. Fixes: 5c34c403b723 ("iommu/amd: Fix memory leak in free_pagetable") Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-07-10iommu/arm-smmu: Fix broken ATOS checkWill Deacon
commit d38f0ff9ab35414644995bae187d015c31aae19c upstream. Commit 83a60ed8f0b5 ("iommu/arm-smmu: fix ARM_SMMU_FEAT_TRANS_OPS condition") accidentally negated the ID0_ATOSNS predicate in the ATOS feature check, causing the driver to attempt ATOS requests on SMMUv2 hardware without the ATOS feature implemented. This patch restores the predicate to the correct value. Reported-by: Varun Sethi <varun.sethi@freescale.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-07-10Revert "crypto: talitos - convert to use be16_add_cpu()"Horia Geant?
commit 69d9cd8c592f1abce820dbce7181bbbf6812cfbd upstream. This reverts commit 7291a932c6e27d9768e374e9d648086636daf61c. The conversion to be16_add_cpu() is incorrect in case cryptlen is negative due to premature (i.e. before addition / subtraction) implicit conversion of cryptlen (int -> u16) leading to sign loss. Cc: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Horia Geanta <horia.geanta@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-07-10crypto: talitos - avoid memleak in talitos_alg_alloc()Horia Geant?
commit 5fa7dadc898567ce14d6d6d427e7bd8ce6eb5d39 upstream. Fixes: 1d11911a8c57 ("crypto: talitos - fix warning: 'alg' may be used uninitialized in this function") Signed-off-by: Horia Geanta <horia.geanta@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-07-10usb: gadget: f_fs: add extra check before unregister_gadget_itemRui Miguel Silva
commit f14e9ad17f46051b02bffffac2036486097de19e upstream. ffs_closed can race with configfs_rmdir which will call config_item_release, so add an extra check to avoid calling the unregister_gadget_item with an null gadget item. Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-07-10net: mvneta: disable IP checksum with jumbo frames for Armada 370Simon Guinot
[ Upstream commit b65657fc240ae6c1d2a1e62db9a0e61ac9631d7a ] The Ethernet controller found in the Armada 370, 380 and 385 SoCs don't support TCP/IP checksumming with frame sizes larger than 1600 bytes. This patch fixes the issue by disabling the features NETIF_F_IP_CSUM and NETIF_F_TSO for the Armada 370 and compatibles SoCs when the MTU is set to a value greater than 1600 bytes. Signed-off-by: Simon Guinot <simon.guinot@sequanux.org> Fixes: c5aff18204da ("net: mvneta: driver for Marvell Armada 370/XP network unit") Cc: <stable@vger.kernel.org> # v3.8+ Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-07-10net: mvneta: introduce compatible string "marvell, armada-xp-neta"Simon Guinot
[ Upstream commit f522a975a8101895a85354b9c143f41b8248e71a ] The mvneta driver supports the Ethernet IP found in the Armada 370, XP, 380 and 385 SoCs. Since at least one more hardware feature is available for the Armada XP SoCs then a way to identify them is needed. This patch introduces a new compatible string "marvell,armada-xp-neta". Signed-off-by: Simon Guinot <simon.guinot@sequanux.org> Fixes: c5aff18204da ("net: mvneta: driver for Marvell Armada 370/XP network unit") Cc: <stable@vger.kernel.org> # v3.8+ Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-07-10amd-xgbe: Add the __GFP_NOWARN flag to Rx buffer allocationTom Lendacky
[ Upstream commit 472cfe7127760d68b819cf35a26e5a1b44b30f4e ] When allocating Rx related buffers, alloc_pages is called using an order number that is decreased until successful. A system under stress can experience failures during this allocation process resulting in a warning being issued. This message can be of concern to end users even though the failure is not fatal. Since the failure is not fatal and can occur multiple times, the driver should include the __GFP_NOWARN flag to suppress the warning message from being issued. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-07-10bnx2x: fix lockdep splatEric Dumazet
[ Upstream commit d53c66a5b80698620f7c9ba2372fff4017e987b8 ] Michel reported following lockdep splat [ 44.718117] INFO: trying to register non-static key. [ 44.723081] the code is fine but needs lockdep annotation. [ 44.728559] turning off the locking correctness validator. [ 44.734036] CPU: 8 PID: 5483 Comm: ethtool Not tainted 4.1.0 [ 44.770289] Call Trace: [ 44.772741] [<ffffffff816eb1cd>] dump_stack+0x4c/0x65 [ 44.777879] [<ffffffff8111d921>] ? console_unlock+0x1f1/0x510 [ 44.783708] [<ffffffff811121f5>] __lock_acquire+0x1d05/0x1f10 [ 44.789538] [<ffffffff8111370a>] ? mark_held_locks+0x6a/0x90 [ 44.795276] [<ffffffff81113835>] ? trace_hardirqs_on_caller+0x105/0x1d0 [ 44.801967] [<ffffffff8111390d>] ? trace_hardirqs_on+0xd/0x10 [ 44.807793] [<ffffffff811330fa>] ? hrtimer_try_to_cancel+0x4a/0x250 [ 44.814142] [<ffffffff81112ba6>] lock_acquire+0xb6/0x290 [ 44.819537] [<ffffffff810d6675>] ? flush_work+0x5/0x280 [ 44.824844] [<ffffffff810d66ad>] flush_work+0x3d/0x280 [ 44.830061] [<ffffffff810d6675>] ? flush_work+0x5/0x280 [ 44.835366] [<ffffffff816f3c43>] ? schedule_hrtimeout_range+0x13/0x20 [ 44.841889] [<ffffffff8112ec9b>] ? usleep_range+0x4b/0x50 [ 44.847365] [<ffffffff8111370a>] ? mark_held_locks+0x6a/0x90 [ 44.853102] [<ffffffff810d8585>] ? __cancel_work_timer+0x105/0x1c0 [ 44.859359] [<ffffffff81113835>] ? trace_hardirqs_on_caller+0x105/0x1d0 [ 44.866045] [<ffffffff810d851f>] __cancel_work_timer+0x9f/0x1c0 [ 44.872048] [<ffffffffa0010982>] ? bnx2x_func_stop+0x42/0x90 [bnx2x] [ 44.878481] [<ffffffff810d8670>] cancel_work_sync+0x10/0x20 [ 44.884134] [<ffffffffa00259e5>] bnx2x_chip_cleanup+0x245/0x730 [bnx2x] [ 44.890829] [<ffffffff8110ce02>] ? up+0x32/0x50 [ 44.895439] [<ffffffff811306b5>] ? del_timer_sync+0x5/0xd0 [ 44.901005] [<ffffffffa005596d>] bnx2x_nic_unload+0x20d/0x8e0 [bnx2x] [ 44.907527] [<ffffffff811f1aef>] ? might_fault+0x5f/0xb0 [ 44.912921] [<ffffffffa005851c>] bnx2x_reload_if_running+0x2c/0x50 [bnx2x] [ 44.919879] [<ffffffffa005a3c5>] bnx2x_set_ringparam+0x2b5/0x460 [bnx2x] [ 44.926664] [<ffffffff815d498b>] dev_ethtool+0x55b/0x1c40 [ 44.932148] [<ffffffff815dfdc7>] ? rtnl_lock+0x17/0x20 [ 44.937364] [<ffffffff815e7f8b>] dev_ioctl+0x17b/0x630 [ 44.942582] [<ffffffff815abf8d>] sock_do_ioctl+0x5d/0x70 [ 44.947972] [<ffffffff815ac013>] sock_ioctl+0x73/0x280 [ 44.953192] [<ffffffff8124c1c8>] do_vfs_ioctl+0x88/0x5b0 [ 44.958587] [<ffffffff8110d0b3>] ? up_read+0x23/0x40 [ 44.963631] [<ffffffff812584cc>] ? __fget_light+0x6c/0xa0 [ 44.969105] [<ffffffff8124c781>] SyS_ioctl+0x91/0xb0 [ 44.974149] [<ffffffff816f4dd7>] system_call_fastpath+0x12/0x6f As bnx2x_init_ptp() is only called if bp->flags contains PTP_SUPPORTED, we also need to guard bnx2x_stop_ptp() with same condition, otherwise ptp_task workqueue is not initialized and kernel barfs on cancel_work_sync() Fixes: eeed018cbfa30 ("bnx2x: Add timestamping and PTP hardware clock support") Reported-by: Michel Lespinasse <walken@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Michal Kalderon <Michal.Kalderon@qlogic.com> Cc: Ariel Elior <Ariel.Elior@qlogic.com> Cc: Yuval Mintz <Yuval.Mintz@qlogic.com> Cc: David Decotigny <decot@google.com> Acked-by: Sony Chacko <sony.chacko@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-07-10net: phy: fix phy link up when limiting speed via device treeMugunthan V N
[ Upstream commit eb686231fce3770299760f24fdcf5ad041f44153 ] When limiting phy link speed using "max-speed" to 100mbps or less on a giga bit phy, phy never completes auto negotiation and phy state machine is held in PHY_AN. Fixing this issue by comparing the giga bit advertise though phydev->supported doesn't have it but phy has BMSR_ESTATEN set. So that auto negotiation is restarted as old and new advertise are different and link comes up fine. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-07-10mlx4: Disable HA for SRIOV PF RoCE devicesOr Gerlitz
[ Upstream commit 7254acffeeec3c0a75b9c5364c29a6eb00014930 ] When in HA mode, the driver exposes an IB (RoCE) device instance with only one port. Under SRIOV, the existing implementation doesn't go well with the PF RoCE driver's role of Special QPs Para-Virtualization, etc. As such, disable HA for the mlx4 PF RoCE device in SRIOV mode. Fixes: a57500903093 ('IB/mlx4: Add port aggregation support') Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-07-10net/mlx4_en: Fix wrong csum complete report when rxvlan offload is disabledIdo Shamay
[ Upstream commit 79a258526ce1051cb9684018c25a89d51ac21be8 ] The check_csum() function relied on hwtstamp_rx_filter to know if rxvlan offload is disabled. This is wrong since rxvlan offload can be switched on/off regardless of hwtstamp_rx_filter. Also moved check_csum to query CQE information to identify VLAN packets and removed the check of IP packets, since it has been validated before. Fixes: f8c6455bb04b ('net/mlx4_en: Extend checksum offloading by CHECKSUM COMPLETE') Signed-off-by: Ido Shamay <idos@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-07-10net/mlx4_en: Wake TX queues only when there's enough roomIdo Shamay
[ Upstream commit 488a9b48e398b157703766e2cd91ea45ac6997c5 ] Indication of a single completed packet, marked by txbbs_skipped being bigger then zero, in not enough in order to wake up a stopped TX queue. The completed packet may contain a single TXBB, while next packet to be sent (after the wake up) may have multiple TXBBs (LSO/TSO packets for example), causing overflow in queue followed by WQE corruption and TX queue timeout. Instead, wake the stopped queue only when there's enough room for the worst case (maximum sized WQE) packet that we should need to handle after the queue is opened again. Also created an helper routine - mlx4_en_is_tx_ring_full, which checks if the current TX ring is full or not. It provides better code readability and removes code duplication. Signed-off-by: Ido Shamay <idos@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-07-10net/mlx4_en: Release TX QP when destroying TX ringEran Ben Elisha
[ Upstream commit 0eb08514fdbdcd16fd6870680cd638f203662e9d ] TX ring QP wasn't released at mlx4_en_destroy_tx_ring. Instead, the code used the deprecated base_tx_qpn field. Move TX QP release to mlx4_en_destroy_tx_ring and remove the base_tx_qpn field. Fixes: ddae0349fdb7 ('net/mlx4: Change QP allocation scheme') Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-07-10xen-netback: fix a BUG() during initializationPalik, Imre
[ Upstream commit 12b322ac85208de564ecf23aa754d796a91de21f ] Commit edafc132baac ("xen-netback: making the bandwidth limiter runtime settable") introduced the capability to change the bandwidth rate limit at runtime. But it also introduced a possible crashing bug. If netback receives two XenbusStateConnected without getting the hotplug-status watch firing in between, then it will try to register the watches for the rate limiter again. But this triggers a BUG() in the watch registration code. The fix modifies connect() to remove the possibly existing packet-rate watches before trying to install those watches. This behaviour is in line with how connect() deals with the hotplug-status watch. Signed-off-by: Imre Palik <imrep@amazon.de> Cc: Matt Wilson <msw@amazon.com> Acked-by: Wei Liu <wei.liu2@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-07-10mvneta: add forgotten initialization of autonegotiation bitsStas Sergeev
[ Upstream commit 538761b794c1542f1c6e31eadd9d7aae118889f7 ] The commit 898b2970e2c9 ("mvneta: implement SGMII-based in-band link state signaling") changed mvneta_adjust_link() so that it does not clear the auto-negotiation bits in MVNETA_GMAC_AUTONEG_CONFIG register. This was necessary for auto-negotiation mode to work. Unfortunately I haven't checked if these bits are ever initialized. It appears they are not. This patch adds the missing initialization of the auto-negotiation bits in the MVNETA_GMAC_AUTONEG_CONFIG register. It fixes the following regression: https://www.mail-archive.com/netdev@vger.kernel.org/msg67928.html Since the patch was tested to fix a regression, it should be applied to stable tree. Tested-by: Arnaud Ebalard <arno@natisbad.org> CC: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> CC: Florian Fainelli <f.fainelli@gmail.com> CC: netdev@vger.kernel.org CC: linux-kernel@vger.kernel.org CC: stable@vger.kernel.org Signed-off-by: Stas Sergeev <stsp@users.sourceforge.net> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-07-10can: fix loss of CAN frames in raw_rcvOliver Hartkopp
commit 36c01245eb8046c16eee6431e7dbfbb302635fa8 upstream. As reported by Manfred Schlaegl here http://marc.info/?l=linux-netdev&m=143482089824232&w=2 commit 514ac99c64b "can: fix multiple delivery of a single CAN frame for overlapping CAN filters" requires the skb->tstamp to be set to check for identical CAN skbs. As net timestamping is influenced by several players (netstamp_needed and netdev_tstamp_prequeue) Manfred missed a proper timestamp which leads to CAN frame loss. As skb timestamping became now mandatory for CAN related skbs this patch makes sure that received CAN skbs always have a proper timestamp set. Maybe there's a better solution in the future but this patch fixes the CAN frame loss so far. Reported-by: Manfred Schlaegl <manfred.schlaegl@gmx.at> Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-06-29cdc-acm: Add support of ATOL FPrint fiscal printersAlexey Sokolov
commit 15bf722e6f6c0b884521a0363204532e849deb7f upstream. ATOL FPrint fiscal printers require usb_clear_halt to be executed to work properly. Add quirk to fix the issue. Signed-off-by: Alexey Sokolov <sokolov@7pikes.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-06-29b43: fix support for 14e4:4321 PCI dev with BCM4321 chipsetRafał Miłecki
commit 90f91b129810c3f169e443252be30ed7c0130326 upstream. It seems Broadcom released two devices with conflicting device id. There are for sure 14e4:4321 PCI devices with BCM4321 (N-PHY) chipset, they can be found in routers, e.g. Netgear WNR834Bv2. However, according to Broadcom public sources 0x4321 is also used for 5 GHz BCM4306 (G-PHY). It's unsure if they meant PCI device id, or "virtual" id (from SPROM). To distinguish these devices lets check PHY type (G vs. N). Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Cc: <stable@vger.kernel.org> # 3.16+ Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-06-29ath3k: add support of 13d3:3474 AR3012 deviceDmitry Tunin
commit 0d0cef6183aec0fb6d0c9f00a09ff51ee086bbe2 upstream. BugLink: https://bugs.launchpad.net/bugs/1427680 This device requires new firmware files AthrBT_0x11020100.dfu and ramps_0x11020100_40.dfu added to /lib/firmware/ar3k/ that are not included in linux-firmware yet. T: Bus=01 Lev=01 Prnt=01 Port=04 Cnt=01 Dev#= 4 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=13d3 ProdID=3474 Rev=00.01 C: #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb Signed-off-by: Dmitry Tunin <hanipouspilot@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-06-29ath3k: Add support of 0489:e076 AR3012 deviceDmitry Tunin
commit 692c062e7c282164fd7cda68077f79dafd176eaf upstream. BugLink: https://bugs.launchpad.net/bugs/1462614 This device requires new firmware files AthrBT_0x11020100.dfu and ramps_0x11020100_40.dfu added to /lib/firmware/ar3k/ that are not included in linux-firmware yet. T: Bus=03 Lev=01 Prnt=01 Port=09 Cnt=06 Dev#= 7 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0489 ProdID=e076 Rev= 0.01 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms Signed-off-by: Dmitry Tunin <hanipouspilot@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-06-29Bluetooth: ath3k: Add support of 04ca:300d AR3012 deviceDmitry Tunin
commit 7e730c7f3d1f39c25cf5f7cf70c0ff4c28d7bec7 upstream. BugLink: https://bugs.launchpad.net/bugs/1394368 This device requires new firmware files AthrBT_0x11020100.dfu and ramps_0x11020100_40.dfu added to /lib/firmware/ar3k/ that are not included in linux-firmware yet. T: Bus=02 Lev=01 Prnt=01 Port=04 Cnt=03 Dev#= 5 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=04ca ProdID=300d Rev= 0.01 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms Signed-off-by: Dmitry Tunin <hanipouspilot@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-06-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pendingLinus Torvalds
Pull scsi target fixes from Nicholas Bellinger: "Apologies for the late pull request. Here are the outstanding target-pending fixes for v4.1 code. The series contains three patches from Sagi + Co that address a few iser-target issues that have been uncovered during recent testing at Mellanox. Patch #1 has a v3.16+ stable tag, and #2-3 have v3.10+ stable tags" * git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: iser-target: Fix possible use-after-free iser-target: release stale iser connections iser-target: Fix variable-length response error completion
2015-06-20Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds
Pull drm fixes from Dave Airlie: "A smattering of fixes, mgag200: don't accept modes that aren't aligned properly as hw can't do it i915: two regression fixes radeon: one query to allow userspace fixes one oops fixer for older hw with new options enabled" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/radeon: don't probe MST on hw we don't support it on drm/radeon: Add RADEON_INFO_VA_UNMAP_WORKING query drm/mgag200: Reject non-character-cell-aligned mode widths Revert "drm/i915: Don't skip request retirement if the active list is empty" drm/i915: Always reset vma->ggtt_view.pages cache on unbinding
2015-06-19Merge tag 'clk-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk fixes from Michael Turquette: "Very late clk regression fixes for the ARM-based AT91 platform. These went unnoticed by me until recently, hence the late pull request" * tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: clk: at91: fix h32mx prototype inclusion in pmc header clk: at91: trivial: typo in peripheral clock description clk: at91: fix PERIPHERAL_MAX_SHIFT definition clk: at91: pll: fix input range validity check
2015-06-19Merge branch 'ccf/atmel-fixes-for-4.1' of ↵Michael Turquette
https://github.com/bbrezillon/linux-at91 into clk-fixes
2015-06-19clk: at91: fix h32mx prototype inclusion in pmc headerNicolas Ferre
Trivial fix that prevents to compile this pmc clock driver if h32mx clock is present but smd clock isn't. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Fixes: bcc5fd49a0fd ("clk: at91: add a driver for the h32mx clock") Cc: <stable@vger.kernel.org> # 3.18+
2015-06-19clk: at91: fix PERIPHERAL_MAX_SHIFT definitionBoris Brezillon
Fix the PERIPHERAL_MAX_SHIFT definition (3 instead of 4) and adapt the round_rate and set_rate logic accordingly. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Reported-by: "Wu, Songjun" <Songjun.Wu@atmel.com>
2015-06-19clk: at91: pll: fix input range validity checkBoris Brezillon
The PLL impose a certain input range to work correctly, but it appears that this input range does not apply on the input clock (or parent clock) but on the input clock after it has passed the PLL divisor. Fix the implementation accordingly. Cc: <stable@vger.kernel.org> # v3.14+ Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Reported-by: Jonas Andersson <jonas@microbit.se>
2015-06-19Merge tag 'drm-intel-fixes-2015-06-18' of ↵Dave Airlie
git://anongit.freedesktop.org/drm-intel into drm-fixes one fix, one revert * tag 'drm-intel-fixes-2015-06-18' of git://anongit.freedesktop.org/drm-intel: Revert "drm/i915: Don't skip request retirement if the active list is empty" drm/i915: Always reset vma->ggtt_view.pages cache on unbinding
2015-06-18drm/radeon: don't probe MST on hw we don't support it onDave Airlie
If you do radeon.mst=1 on a gpu without mst hw, and then plug some mst hw it will oops instead of falling back. So check we have DCE5 at least before proceeding. Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Christian König <christian.koenig@amd.com>
2015-06-18drm/radeon: Add RADEON_INFO_VA_UNMAP_WORKING queryMichel Dänzer
This tells userspace that it's safe to use the RADEON_VA_UNMAP operation of the DRM_RADEON_GEM_VA ioctl. Cc: stable@vger.kernel.org (NOTE: Backporting this commit requires at least backports of commits 26d4d129b6042197b4cbc8341c0618f99231af2f, 48afbd70ac7b6aa62e8d452091023941d8085f8a and c29c0876ec05d51a93508a39b90b92c29ba6423d as well, otherwise using RADEON_VA_UNMAP runs into trouble) Signed-off-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Christian König <christian.koenig@amd.com>
2015-06-17Kconfig: disable Media Controller for DVBMauro Carvalho Chehab
Since when we start discussions about the usage Media Controller for complex hardware, one thing become clear: the way it is, MC fails to map anything different than capture/output/m2m video-only streaming. The point is that MC has entities named as devnodes, but the only devnode used (before the DVB patches) is MEDIA_ENT_T_DEVNODE_V4L. Due to the way MC got implemented, however, this entity actually doesn't represent the devnode, but the hardware I/O engine that receives data via DMA. By coincidence, such DMA is associated with the V4L device node on webcam hardware, but this is not true even for other V4L2 devices. For example, on USB hardware, the DMA is done via the USB controller. The data passes though a in-kernel filter that strips off the URB headers. Other V4L2 devices like radio may not even have DMA. When it have, the DMA is done via ALSA, and not via the V4L devnode. In other words, MC is broken as a whole, but tagging it as BROKEN right now would do more harm than good. So, instead, let's mark, for now, the DVB part as broken and block all new changes to MC while we fix this mess, whith we hopefully will do for the next Kernel version. Requested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-06-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds
Pull crypto fixes from Herbert Xu: "This fixes the following issues: - Crash in caam hash due to uninitialised buffer lengths. - Alignment issue in caam RNG that may lead to non-random output" * git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: caam - fix RNG buffer cache alignment crypto: caam - improve initalization for context state saves
2015-06-16crypto: caam - fix RNG buffer cache alignmentSteve Cornelius
The hwrng output buffers (2) are cast inside of a a struct (caam_rng_ctx) allocated in one DMA-tagged region. While the kernel's heap allocator should place the overall struct on a cacheline aligned boundary, the 2 buffers contained within may not necessarily align. Consenquently, the ends of unaligned buffers may not fully flush, and if so, stale data will be left behind, resulting in small repeating patterns. This fix aligns the buffers inside the struct. Note that not all of the data inside caam_rng_ctx necessarily needs to be DMA-tagged, only the buffers themselves require this. However, a fix would incur the expense of error-handling bloat in the case of allocation failure. Cc: stable@vger.kernel.org Signed-off-by: Steve Cornelius <steve.cornelius@freescale.com> Signed-off-by: Victoria Milhoan <vicki.milhoan@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-06-16crypto: caam - improve initalization for context state savesSteve Cornelius
Multiple function in asynchronous hashing use a saved-state block, a.k.a. struct caam_hash_state, which holds a stash of information between requests (init/update/final). Certain values in this state block are loaded for processing using an inline-if, and when this is done, the potential for uninitialized data can pose conflicts. Therefore, this patch improves initialization of state data to prevent false assignments using uninitialized data in the state block. This patch addresses the following traceback, originating in ahash_final_ctx(), although a problem like this could certainly exhibit other symptoms: kernel BUG at arch/arm/mm/dma-mapping.c:465! Unable to handle kernel NULL pointer dereference at virtual address 00000000 pgd = 80004000 [00000000] *pgd=00000000 Internal error: Oops: 805 [#1] PREEMPT SMP Modules linked in: CPU: 0 Not tainted (3.0.15-01752-gdd441b9-dirty #40) PC is at __bug+0x1c/0x28 LR is at __bug+0x18/0x28 pc : [<80043240>] lr : [<8004323c>] psr: 60000013 sp : e423fd98 ip : 60000013 fp : 0000001c r10: e4191b84 r9 : 00000020 r8 : 00000009 r7 : 88005038 r6 : 00000001 r5 : 2d676572 r4 : e4191a60 r3 : 00000000 r2 : 00000001 r1 : 60000093 r0 : 00000033 Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel Control: 10c53c7d Table: 1000404a DAC: 00000015 Process cryptomgr_test (pid: 1306, stack limit = 0xe423e2f0) Stack: (0xe423fd98 to 0xe4240000) fd80: 11807fd1 80048544 fda0: 88005000 e4191a00 e5178040 8039dda0 00000000 00000014 2d676572 e4191008 fdc0: 88005018 e4191a60 00100100 e4191a00 00000000 8039ce0c e423fea8 00000007 fde0: e4191a00 e4227000 e5178000 8039ce18 e419183c 80203808 80a94a44 00000006 fe00: 00000000 80207180 00000000 00000006 e423ff08 00000000 00000007 e5178000 fe20: e41918a4 80a949b4 8c4844e2 00000000 00000049 74227000 8c4844e2 00000e90 fe40: 0000000e 74227e90 ffff8c58 80ac29e0 e423fed4 8006a350 8c81625c e423ff5c fe60: 00008576 e4002500 00000003 00030010 e4002500 00000003 e5180000 e4002500 fe80: e5178000 800e6d24 007fffff 00000000 00000010 e4001280 e4002500 60000013 fea0: 000000d0 804df078 00000000 00000000 00000000 00000000 00000000 00000000 fec0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 fee0: 00000000 00000000 e4227000 e4226000 e4753000 e4752000 e40a5000 e40a4000 ff00: e41e7000 e41e6000 00000000 00000000 00000000 e423ff14 e423ff14 00000000 ff20: 00000400 804f9080 e5178000 e4db0b40 00000000 e4db0b80 0000047c 00000400 ff40: 00000000 8020758c 00000400 ffffffff 0000008a 00000000 e4db0b40 80206e00 ff60: e4049dbc 00000000 00000000 00000003 e423ffa4 80062978 e41a8bfc 00000000 ff80: 00000000 e4049db4 00000013 e4049db0 00000013 00000000 00000000 00000000 ffa0: e4db0b40 e4db0b40 80204cbc 00000013 00000000 00000000 00000000 80204cfc ffc0: e4049da0 80089544 80040a40 00000000 e4db0b40 00000000 00000000 00000000 ffe0: e423ffe0 e423ffe0 e4049da0 800894c4 80040a40 80040a40 00000000 00000000 [<80043240>] (__bug+0x1c/0x28) from [<80048544>] (___dma_single_dev_to_cpu+0x84) [<80048544>] (___dma_single_dev_to_cpu+0x84/0x94) from [<8039dda0>] (ahash_fina) [<8039dda0>] (ahash_final_ctx+0x180/0x428) from [<8039ce18>] (ahash_final+0xc/0) [<8039ce18>] (ahash_final+0xc/0x10) from [<80203808>] (crypto_ahash_op+0x28/0xc) [<80203808>] (crypto_ahash_op+0x28/0xc0) from [<80207180>] (test_hash+0x214/0x5) [<80207180>] (test_hash+0x214/0x5b8) from [<8020758c>] (alg_test_hash+0x68/0x8c) [<8020758c>] (alg_test_hash+0x68/0x8c) from [<80206e00>] (alg_test+0x7c/0x1b8) [<80206e00>] (alg_test+0x7c/0x1b8) from [<80204cfc>] (cryptomgr_test+0x40/0x48) [<80204cfc>] (cryptomgr_test+0x40/0x48) from [<80089544>] (kthread+0x80/0x88) [<80089544>] (kthread+0x80/0x88) from [<80040a40>] (kernel_thread_exit+0x0/0x8) Code: e59f0010 e1a01003 eb126a8d e3a03000 (e5833000) ---[ end trace d52a403a1d1eaa86 ]--- Cc: stable@vger.kernel.org Signed-off-by: Steve Cornelius <steve.cornelius@freescale.com> Signed-off-by: Victoria Milhoan <vicki.milhoan@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-06-16drm/mgag200: Reject non-character-cell-aligned mode widthsAdam Jackson
Turns out 1366x768 does not in fact work on this hardware. Signed-off-by: Adam Jackson <ajax@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2015-06-15Revert "drm/i915: Don't skip request retirement if the active list is empty"Jani Nikula
This reverts commit 0aedb1626566efd72b369c01992ee7413c82a0c5. I messed things up while applying [1] to drm-intel-fixes. Rectify. [1] http://mid.gmane.org/1432827156-9605-1-git-send-email-ville.syrjala@linux.intel.com Fixes: 0aedb1626566 ("drm/i915: Don't skip request retirement if the active list is empty") Cc: stable@vger.kernel.org Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2015-06-15drm/i915: Always reset vma->ggtt_view.pages cache on unbindingChris Wilson
With the introduction of multiple views of an obj in the same vm, each vma was taught to cache its copy of the pages (so that different views could have different page arrangements). However, this missed decoupling those vma->ggtt_view.pages when the vma released its reference on the obj->pages. As we don't always free the vma, this leads to a possible scenario (e.g. execbuffer interrupted by the shrinker) where the vma points to a stale obj->pages, and explodes. Fixes regression from commit fe14d5f4e5468c5b80a24f1a64abcbe116143670 Author: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Date: Wed Dec 10 17:27:58 2014 +0000 drm/i915: Infrastructure for supporting different GGTT views per object Tvrtko says, if someone else will be confused how this can happen, key is the reservation execbuffer path. That puts the VMA on the exec_list which prevents i915_vma_unbind and i915_gem_vma_destroy from fully destroying the VMA. So the VMA is left existing as an empty object in the list - unbound and disassociated with the backing store. Kind of a cached memory object. And then re-using it needs to clear the cached pages pointer which is fixed above. Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1227892 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Michel Thierry <michel.thierry@intel.com> Cc: stable@vger.kernel.org Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> [Jani: Added Tvrtko's explanation to commit message.] Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2015-06-14Merge branch 'fixes' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds
Pull dmaengine fixes from Vinod Koul: "Here are hopefully last set of fixes for 4.1. This time we have: - fixing pause capability reporting on both dmaengine pause & resume support by Krzysztof - locking fix fir at_xdmac by Ludovic - slave configuration fix for at_xdmac by Ludovic" * 'fixes' of git://git.infradead.org/users/vkoul/slave-dma: dmaengine: Fix choppy sound because of unimplemented resume dmaengine: at_xdmac: rework slave configuration part dmaengine: at_xdmac: lock fixes
2015-06-14Merge tag 'ntb-4.1' of git://github.com/jonmason/ntbLinus Torvalds
Pull NTB fixes from Jon Mason: "I apologize for the tardiness of this request. Here are a couple of last minute NTB bug fixes for v4.1: NTB bug fixes to address issues in unmapping the MW reg base and vbase, and an uninitialized variable on Atom platforms" * tag 'ntb-4.1' of git://github.com/jonmason/ntb: ntb: initialize max_mw for Atom before using it ntb: iounmap MW reg and vbase in error path
2015-06-14Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds
Pull more MIPS fixes from Ralf Baechle: "Another round of 4.1 MIPS fixes, one fix to a MIPS-specific #if condition in lib/mpi, one fix to the MIPS GIC irqchip driver and one SSB fix. Details: - fix handling of clock in chipco SSB driver. - fix two MIPS-specific #if conditions to correctly work for GCC 5.1. - fix damage to R6 pgtable bits done by XPA support. - fix possible crash due to unloading modules that contain statically defined platform devices. - fix disabling of the MSA ASE on context switch to also work correctly when a new thread/process has the CPU for the very first time. This is part of linux-next and has been beaten to death on Imagination's test farm. While things are not looking too grim this pull request also means the rate of fixes for 4.1 remains nearly constant so I'd not be unhappy if you'd delay the release" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: MPI: MIPS: Fix compilation error with GCC 5.1 IRQCHIP: mips-gic: Don't nest calls to do_IRQ() MIPS: MSA: bugfix - disable MSA correctly for new threads/processes. MIPS: Loongson: Do not register 8250 platform device from module. MIPS: Cobalt: Do not build MTD platform device registration code as module. SSB: Fix handling of ssb_pmu_get_alp_clock() MIPS: pgtable-bits: Fix XPA damage to R6 definitions.
2015-06-14Merge branch 'irq-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irqchip fix from Thomas Gleixner: "A single fix for an off by one bug in the sunxi irqchip driver" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip: sunxi-nmi: Fix off-by-one error in irq iterator
2015-06-13IRQCHIP: mips-gic: Don't nest calls to do_IRQ()Rabin Vincent
The GIC chained handlers use do_IRQ() to call the subhandlers. This means that irq_enter() calls get nested, which leads to preempt count looking like we're in nested interrupts, which in turn leads to all system time being accounted as IRQ time in account_system_time(). Fix it by using generic_handle_irq(). Since these same functions are used in some systems (if cpu_has_veic) from a low-level vectored interrupt handler which does not go throught do_IRQ(), we need to do it conditionally. Signed-off-by: Rabin Vincent <rabin.vincent@axis.com> Reviewed-by: Andrew Bresticker <abrestic@chromium.org> Acked-by: Thomas Gleixner <tglx@linutronix.de> Cc: linux-mips@linux-mips.org Cc: tglx@linutronix.de Cc: jason@lakedaemon.net Patchwork: https://patchwork.linux-mips.org/patch/10545/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-06-12Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: 1) Fix uninitialized struct station_info in cfg80211_wireless_stats(), from Johannes Berg. 2) Revert commit attempt to fix ipv6 protocol resubmission, it adds regressions. 3) Endless loops can be created in bridge port lists, fix from Nikolay Aleksandrov. 4) Don't WARN_ON() if sk->sk_forward_alloc is non-zero in sk_clear_memalloc, it is a legal situation during swap deactivation. Fix from Mel Gorman. 5) Fix order of disabling interrupts and unlocking NAPI in enic driver to avoid a race. From Govindarajulu Varadarajan. 6) High and low register writes are swapped when programming the start of periodic output in igb driver. From Richard Cochran. 7) Fix device rename handling in mpls stack, from Robert Shearman. 8) Do not trigger compaction synchronously when optimistically trying to allocate an order 3 page in alloc_skb_with_frags() and skb_page_frag_refill(). From Shaohua Li. 9) Authentication with COOKIE_ECHO is not handled properly in SCTP, fix from Marcelo Ricardo Leitner. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: Doc: networking: Fix URL for wiki.wireshark.org in udplite.txt sctp: allow authenticating DATA chunks that are bundled with COOKIE_ECHO net: don't wait for order-3 page allocation mpls: handle device renames for per-device sysctls net: igb: fix the start time for periodic output signals enic: fix memory leak in rq_clean enic: check return value for stat dump enic: unlock napi busy poll before unmasking intr net, swap: Remove a warning and clarify why sk_mem_reclaim is required when deactivating swap bridge: fix multicast router rlist endless loop tipc: disconnect socket directly after probe failure Revert "ipv6: Fix protocol resubmission" cfg80211: wext: clear sinfo struct before calling driver
2015-06-12Merge branch 'for-linus' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block layer fixes from Jens Axboe: "Remember about a week ago when I sent the last pull request for 4.1? Well, I lied. Now, I don't want to shift the blame, but Dan, Ming, and Richard made a liar out of me. Here are three small patches that should go into 4.1. More specifically, this pull request contains: - A Kconfig dependency for the pmem block driver, so it can't be selected if HAS_IOMEM isn't availble. From Richard Weinberger. - A fix for genhd, making the ext_devt_lock softirq safe. This makes lockdep happier, since we also end up grabbing this lock on release off the softirq path. From Dan Williams. - A blk-mq software queue release fix from Ming Lei. Last two are headed to stable, first fixes an issue introduced in this cycle" * 'for-linus' of git://git.kernel.dk/linux-block: block: pmem: Add dependency on HAS_IOMEM block: fix ext_dev_lock lockdep report blk-mq: free hctx->ctxs in queue's release handler
generated by cgit v1.2.3 (git 2.0.4) at 2024-06-25 09:22:39 +0000