| Age | Commit message (Collapse) | Author |
|---|
|
[ Upstream commit d46b0da7a33dd8c99d969834f682267a45444ab3 ]
There's a deadlock that is possible and can easily be seen with
a test where multiple readers open/read/close of the same file
and a disruption occurs causing reconnect. The deadlock is due
a reader thread inside cifs_strict_readv calling down_read and
obtaining lock_sem, and then after reconnect inside
cifs_reopen_file calling down_read a second time. If in
between the two down_read calls, a down_write comes from
another process, deadlock occurs.
CPU0 CPU1
---- ----
cifs_strict_readv()
down_read(&cifsi->lock_sem);
_cifsFileInfo_put
OR
cifs_new_fileinfo
down_write(&cifsi->lock_sem);
cifs_reopen_file()
down_read(&cifsi->lock_sem);
Fix the above by changing all down_write(lock_sem) calls to
down_write_trylock(lock_sem)/msleep() loop, which in turn
makes the second down_read call benign since it will never
block behind the writer while holding lock_sem.
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
Suggested-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed--by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit b98749cac4a695f084a5ff076f4510b23e353ecd upstream.
In the oplock break handler, writing pending changes from pages puts
the FileInfo handle. If the refcount reaches zero it closes the handle
and waits for any oplock break handler to return, thus causing a deadlock.
To prevent this situation:
* We add a wait flag to cifsFileInfo_put() to decide whether we should
wait for running/pending oplock break handlers
* We keep an additionnal reference of the SMB FileInfo handle so that
for the rest of the handler putting the handle won't close it.
- The ref is bumped everytime we queue the handler via the
cifs_queue_oplock_break() helper.
- The ref is decremented at the end of the handler
This bug was triggered by xfstest 464.
Also important fix to address the various reports of
oops in smb2_push_mandatory_locks
Signed-off-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
CC: Stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 696e420bb2a6624478105651d5368d45b502b324 upstream.
With protocol version 2.0 mounts we have seen crashes with corrupt mid
entries. Either the server->pending_mid_q list becomes corrupt with a
cyclic reference in one element or a mid object fetched by the
demultiplexer thread becomes overwritten during use.
Code review identified a race between the demultiplexer thread and the
request issuing thread. The demultiplexer thread seems to be written
with the assumption that it is the sole user of the mid object until
it calls the mid callback which either wakes the issuer task or
deletes the mid.
This assumption is not true because the issuer task can be woken up
earlier by a signal. If the demultiplexer thread has proceeded as far
as setting the mid_state to MID_RESPONSE_RECEIVED then the issuer
thread will happily end up calling cifs_delete_mid while the
demultiplexer thread still is using the mid object.
Inserting a delay in the cifs demultiplexer thread widens the race
window and makes reproduction of the race very easy:
if (server->large_buf)
buf = server->bigbuf;
+ usleep_range(500, 4000);
server->lstrp = jiffies;
To resolve this I think the proper solution involves putting a
reference count on the mid object. This patch makes sure that the
demultiplexer thread holds a reference until it has finished
processing the transaction.
Cc: stable@vger.kernel.org
Signed-off-by: Lars Persson <larper@axis.com>
Acked-by: Paulo Alcantara <palcantara@suse.de>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 5fcd7f3f966f37f3f9a215af4cc1597fe338d0d5 upstream.
* prepare for SMB3.11 pre-auth integrity
* enable sha512 when SMB311 is enabled in Kconfig
* add sha512 as a soft dependency
Signed-off-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <smfrench@gmail.com>
CC: Stable <stable@vger.kernel.org>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 7ea884c77e5c97f1e0a1a422d961d27f78ca2745 upstream.
Some servers return inode number zero for the root directory, which
causes ls to display incorrect data (missing "." and "..").
If the server returns zero for the inode number of the root directory,
fake an inode number for it.
Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
CC: Stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
SMB3.1.1 is most secure and recent dialect. Fixup labels and lengths
for sMB3.1.1 signing and encryption.
Signed-off-by: Steve French <smfrench@gmail.com>
CC: Stable <stable@vger.kernel.org>
|
|
With the need to discourage use of less secure dialect, SMB1 (CIFS),
we temporarily upgraded the dialect to SMB3 in 4.13, but since there
are various servers which only support SMB2.1 (2.1 is more secure
than CIFS/SMB1) but not optimal for a default dialect - add support
for multidialect negotiation. cifs.ko will now request SMB2.1
or later (ie SMB2.1 or SMB3.0, SMB3.02) and the server will
pick the latest most secure one it can support.
In addition since we are sending multidialect negotiate, add
support for secure negotiate to validate that a man in the
middle didn't downgrade us.
Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
CC: Stable <stable@vger.kernel.org> # 4.13+
|
|
This adds support for writing extended attributes on SMB2+ shares.
Attributes can be written using the setfattr command.
RH-bz: 1110709
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
|
|
Remove the CONFIG_CIFS_SMB2 ifdef and Kconfig option since they
must always be on now.
For various security reasons, SMB3 and later are STRONGLY preferred
over CIFS and older dialects, and SMB3 (and later) will now be
the default dialects so we do not want to allow them to be
ifdeffed out.
In the longer term, we may be able to make older CIFS support
disableable in Kconfig with a new set of #ifdef, but we always
want SMB3 and later support enabled.
Signed-off-by: Steven French <smfrench@gmail.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
|
|
According to the MS-SMB2 spec (3.2.5.1.6) once the client receives
STATUS_NETWORK_SESSION_EXPIRED error code from a server it should
reconnect the current SMB session. Currently the client doesn't do
that. This can result in subsequent client requests failing by
the server. The patch adds an additional logic to the demultiplex
thread to identify expired sessions and reconnect them.
Cc: <stable@vger.kernel.org>
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <smfrench@gmail.com>
|
|
Some minor cleanup of cifs query xattr functions (will also make
SMB3 xattr implementation cleaner as well).
Signed-off-by: Steve French <steve.french@primarydata.com>
|
|
When the final cifsFileInfo_put() is called from cifsiod and an oplock
break work is queued, lockdep complains loudly:
=============================================
[ INFO: possible recursive locking detected ]
4.11.0+ #21 Not tainted
---------------------------------------------
kworker/0:2/78 is trying to acquire lock:
("cifsiod"){++++.+}, at: flush_work+0x215/0x350
but task is already holding lock:
("cifsiod"){++++.+}, at: process_one_work+0x255/0x8e0
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock("cifsiod");
lock("cifsiod");
*** DEADLOCK ***
May be due to missing lock nesting notation
2 locks held by kworker/0:2/78:
#0: ("cifsiod"){++++.+}, at: process_one_work+0x255/0x8e0
#1: ((&wdata->work)){+.+...}, at: process_one_work+0x255/0x8e0
stack backtrace:
CPU: 0 PID: 78 Comm: kworker/0:2 Not tainted 4.11.0+ #21
Workqueue: cifsiod cifs_writev_complete
Call Trace:
dump_stack+0x85/0xc2
__lock_acquire+0x17dd/0x2260
? match_held_lock+0x20/0x2b0
? trace_hardirqs_off_caller+0x86/0x130
? mark_lock+0xa6/0x920
lock_acquire+0xcc/0x260
? lock_acquire+0xcc/0x260
? flush_work+0x215/0x350
flush_work+0x236/0x350
? flush_work+0x215/0x350
? destroy_worker+0x170/0x170
__cancel_work_timer+0x17d/0x210
? ___preempt_schedule+0x16/0x18
cancel_work_sync+0x10/0x20
cifsFileInfo_put+0x338/0x7f0
cifs_writedata_release+0x2a/0x40
? cifs_writedata_release+0x2a/0x40
cifs_writev_complete+0x29d/0x850
? preempt_count_sub+0x18/0xd0
process_one_work+0x304/0x8e0
worker_thread+0x9b/0x6a0
kthread+0x1b2/0x200
? process_one_work+0x8e0/0x8e0
? kthread_create_on_node+0x40/0x40
ret_from_fork+0x31/0x40
This is a real warning. Since the oplock is queued on the same
workqueue this can deadlock if there is only one worker thread active
for the workqueue (which will be the case during memory pressure when
the rescuer thread is handling it).
Furthermore, there is at least one other kind of hang possible due to
the oplock break handling if there is only worker. (This can be
reproduced without introducing memory pressure by having passing 1 for
the max_active parameter of cifsiod.) cifs_oplock_break() can wait
indefintely in the filemap_fdatawait() while the cifs_writev_complete()
work is blocked:
sysrq: SysRq : Show Blocked State
task PC stack pid father
kworker/0:1 D 0 16 2 0x00000000
Workqueue: cifsiod cifs_oplock_break
Call Trace:
__schedule+0x562/0xf40
? mark_held_locks+0x4a/0xb0
schedule+0x57/0xe0
io_schedule+0x21/0x50
wait_on_page_bit+0x143/0x190
? add_to_page_cache_lru+0x150/0x150
__filemap_fdatawait_range+0x134/0x190
? do_writepages+0x51/0x70
filemap_fdatawait_range+0x14/0x30
filemap_fdatawait+0x3b/0x40
cifs_oplock_break+0x651/0x710
? preempt_count_sub+0x18/0xd0
process_one_work+0x304/0x8e0
worker_thread+0x9b/0x6a0
kthread+0x1b2/0x200
? process_one_work+0x8e0/0x8e0
? kthread_create_on_node+0x40/0x40
ret_from_fork+0x31/0x40
dd D 0 683 171 0x00000000
Call Trace:
__schedule+0x562/0xf40
? mark_held_locks+0x29/0xb0
schedule+0x57/0xe0
io_schedule+0x21/0x50
wait_on_page_bit+0x143/0x190
? add_to_page_cache_lru+0x150/0x150
__filemap_fdatawait_range+0x134/0x190
? do_writepages+0x51/0x70
filemap_fdatawait_range+0x14/0x30
filemap_fdatawait+0x3b/0x40
filemap_write_and_wait+0x4e/0x70
cifs_flush+0x6a/0xb0
filp_close+0x52/0xa0
__close_fd+0xdc/0x150
SyS_close+0x33/0x60
entry_SYSCALL_64_fastpath+0x1f/0xbe
Showing all locks held in the system:
2 locks held by kworker/0:1/16:
#0: ("cifsiod"){.+.+.+}, at: process_one_work+0x255/0x8e0
#1: ((&cfile->oplock_break)){+.+.+.}, at: process_one_work+0x255/0x8e0
Showing busy workqueues and worker pools:
workqueue cifsiod: flags=0xc
pwq 0: cpus=0 node=0 flags=0x0 nice=0 active=1/1
in-flight: 16:cifs_oplock_break
delayed: cifs_writev_complete, cifs_echo_request
pool 0: cpus=0 node=0 flags=0x0 nice=0 hung=0s workers=3 idle: 750 3
Fix these problems by creating a a new workqueue (with a rescuer) for
the oplock break work.
Signed-off-by: Rabin Vincent <rabinv@axis.com>
Signed-off-by: Steve French <smfrench@gmail.com>
CC: Stable <stable@vger.kernel.org>
|
|
This patch adds support to process write calls passed by io_submit()
asynchronously. It based on the previously introduced async context
that allows to process i/o responses in a separate thread and
return the caller immediately for asynchronous calls.
This improves writing performance of single threaded applications
with increasing of i/o queue depth size.
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <smfrench@gmail.com>
|
|
This patch adds support to process read calls passed by io_submit()
asynchronously. It based on the previously introduced async context
that allows to process i/o responses in a separate thread and
return the caller immediately for asynchronous calls.
This improves reading performance of single threaded applications
with increasing of i/o queue depth size.
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <smfrench@gmail.com>
|
|
Currently the code doesn't recognize asynchronous calls passed
by io_submit() and processes all calls synchronously. This is not
what kernel AIO expects. This patch introduces a new async context
that keeps track of all issued i/o requests and moves a response
collecting procedure to a separate thread. This allows to return
to a caller immediately for async calls and call iocb->ki_complete()
once all requests are completed. For sync calls the current thread
simply waits until all requests are completed.
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <smfrench@gmail.com>
|
|
STATUS_BAD_NETWORK_NAME can be received during node failover,
causing the flag to be set and making the reconnect thread
always unsuccessful, thereafter.
Once the only place where it is set is removed, the remaining
bits are rendered moot.
Removing it does not prevent "mount" from failing when a non
existent share is passed.
What happens when the share really ceases to exist while the
share is mounted is undefined now as much as it was before.
Signed-off-by: Germano Percossi <germano.percossi@citrix.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
CC: Stable <stable@vger.kernel.org>
Signed-off-by: Steve French <smfrench@gmail.com>
|
|
The earlier changes to copy range for cifs unintentionally disabled the more
common form of server side copy.
The patch introduces the file_operations helper cifs_copy_file_range()
which is used by the syscall copy_file_range. The new file operations
helper allows us to perform server side copies for SMB2.0 and 2.1
servers as well as SMB 3.0+ servers which do not support the ioctl
FSCTL_DUPLICATE_EXTENTS_TO_FILE.
The new helper uses the ioctl FSCTL_SRV_COPYCHUNK_WRITE to perform
server side copies. The helper is called by vfs_copy_file_range() only
once an attempt to clone the file using the ioctl
FSCTL_DUPLICATE_EXTENTS_TO_FILE has failed.
Signed-off-by: Sachin Prabhu <sprabhu@redhat.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
CC: Stable <stable@vger.kernel.org>
Signed-off-by: Steve French <smfrench@gmail.com>
|
|
Server side copy is one of the most important mechanisms smb2/smb3
supports and it was unintentionally disabled for most use cases.
Renaming calls to reflect the underlying smb2 ioctl called. This is
similar to the name duplicate_extents used for a similar ioctl which is
also used to duplicate files by reusing fs blocks. The name change is to
avoid confusion.
Signed-off-by: Sachin Prabhu <sprabhu@redhat.com>
CC: Stable <stable@vger.kernel.org>
Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
|
|
A signal can interrupt a SendReceive call which result in incoming
responses to the call being ignored. This is a problem for calls such as
open which results in the successful response being ignored. This
results in an open file resource on the server.
The patch looks into responses which were cancelled after being sent and
in case of successful open closes the open fids.
For this patch, the check is only done in SendReceive2()
RH-bz: 1403319
Signed-off-by: Sachin Prabhu <sprabhu@redhat.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Cc: Stable <stable@vger.kernel.org>
|
|
If the security type specified using a mount option is not supported,
the SMB2 session setup code changes the security type to RawNTLMSSP. We
should instead fail the mount and return an error.
The patch changes the code for SMB2 to make it similar to the code used
for SMB1. Like in SMB1, we now use the global security flags to select
the security method to be used when no security method is specified and
to return an error when the requested auth method is not available.
For SMB2, we also use ntlmv2 as a synonym for nltmssp.
Signed-off-by: Sachin Prabhu <sprabhu@redhat.com>
Acked-by: Pavel Shilovsky <pshilov@microsoft.com>
Acked-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
|
|
the TreeId field went from 2 bytes in CIFS to 4 bytes in SMB2+. this
commit updates the size of the ipc_tid field of a cifs_ses, which was
still using 2 bytes.
Signed-off-by: Aurelien Aptel <aaptel@suse.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <smfrench@gmail.com>
|
|
Allow to decrypt transformed packets, find a corresponding mid
and process as usual further.
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
|
|
Since we have two different types of reads (pagecache and direct)
we need to process such responses differently after decryption of
a packet. The change allows to specify a callback that copies a read
payload data into preallocated pages.
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
|
|
We need to process read responses differently because the data
should go directly into preallocated pages. This can be done
by specifying a mid handle callback.
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
|
|
We need to recognize and parse transformed packets in demultiplex
thread to find a corresponsing mid and process it further.
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
|
|
This change allows to encrypt packets if it is required by a server
for SMB sessions or tree connections.
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
|
|
This will allow us to do protocol specific tranformations of packets
before sending to the server. For SMB3 it can be used to support
encryption.
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
|
|
In order to simplify further encryption support we need to separate
RFC1001 length and SMB2 header when sending a request. Put the length
field in iov[0] and the rest of the packet into following iovs.
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
|
|
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
|
|
With commit 2b149f119 many things have been fixed/introduced.
However, the default behaviour for RawNTLMSSP authentication
seems to be wrong in case the domain is not passed on the command line.
The main points (see below) of the patch are:
- It alignes behaviour with Windows clients
- It fixes backward compatibility
- It fixes UPN
I compared this behavour with the one from a Windows 10 command line
client. When no domains are specified on the command line, I traced
the packets and observed that the client does send an empty
domain to the server.
In the linux kernel case, the empty domain is replaced by the
primary domain communicated by the SMB server.
This means that, if the credentials are valid against the local server
but that server is part of a domain, then the kernel module will
ask to authenticate against that domain and we will get LOGON failure.
I compared the packet trace from the smbclient when no domain is passed
and, in that case, a default domain from the client smb.conf is taken.
Apparently, connection succeeds anyway, because when the domain passed
is not valid (in my case WORKGROUP), then the local one is tried and
authentication succeeds. I tried with any kind of invalid domain and
the result was always a connection.
So, trying to interpret what to do and picking a valid domain if none
is passed, seems the wrong thing to do.
To this end, a new option "domainauto" has been added in case the
user wants a mechanism for guessing.
Without this patch, backward compatibility also is broken.
With kernel 3.10, the default auth mechanism was NTLM.
One of our testing servers accepted NTLM and, because no
domains are passed, authentication was local.
Moving to RawNTLMSSP forced us to change our command line
to add a fake domain to pass to prevent this mechanism to kick in.
For the same reasons, UPN is broken because the domain is specified
in the username.
The SMB server will work out the domain from the UPN and authenticate
against the right server.
Without the patch, though, given the domain is empty, it gets replaced
with another domain that could be the wrong one for the authentication.
Signed-off-by: Germano Percossi <germano.percossi@citrix.com>
Acked-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <smfrench@gmail.com>
|
|
With the current code it is possible to lock a mutex twice when
a subsequent reconnects are triggered. On the 1st reconnect we
reconnect sessions and tcons and then persistent file handles.
If the 2nd reconnect happens during the reconnecting of persistent
file handles then the following sequence of calls is observed:
cifs_reopen_file -> SMB2_open -> small_smb2_init -> smb2_reconnect
-> cifs_reopen_persistent_file_handles -> cifs_reopen_file (again!).
So, we are trying to acquire the same cfile->fh_mutex twice which
is wrong. Fix this by moving reconnecting of persistent handles to
the delayed work (smb2_reconnect_server) and submitting this work
every time we reconnect tcon in SMB2 commands handling codepath.
This can also lead to corruption of a temporary file list in
cifs_reopen_persistent_file_handles() because we can recursively
call this function twice.
Cc: Stable <stable@vger.kernel.org> # v4.9+
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
|
|
We can not unlock/lock cifs_tcp_ses_lock while walking through ses
and tcon lists because it can corrupt list iterator pointers and
a tcon structure can be released if we don't hold an extra reference.
Fix it by moving a reconnect process to a separate delayed work
and acquiring a reference to every tcon that needs to be reconnected.
Also do not send an echo request on newly established connections.
CC: Stable <stable@vger.kernel.org>
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
|
|
New mount option "snapshot=<time>" to allow mounting an earlier
version of the remote volume (if such a snapshot exists on
the server).
Note that eventually specifying a snapshot time of 1 will allow
the user to mount the oldest snapshot. A subsequent patch
add the processing for that and another for actually specifying
the "time warp" create context on SMB2/SMB3 open.
Check to make sure SMB2 negotiated, and ensure that
we use a different tcon if mount same share twice
but with different snaphshot times
Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
|
|
Add "idsfromsid" mount option to indicate to cifs.ko that it should
try to retrieve the uid and gid owner fields from special sids in the
ACL if present. This first patch just adds the parsing for the mount
option.
Signed-off-by: Steve French <steve.french@primarydata.com>
Reviewed-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
|
|
openFileList of tcon can be changed while cifs_reopen_file() is called
that can lead to an unexpected behavior when we return to the loop.
Fix this by introducing a temp list for keeping all file handles that
need to be reopen.
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <smfrench@gmail.com>
|
|
Add ioctl to query previous versions of file
Allows listing snapshots on files on SMB3 mounts.
Signed-off-by: Steve French <smfrench@gmail.com>
|
|
Add mount option "max_credits" to allow setting maximum SMB3
credits to any value from 10 to 64000 (default is 32000).
This can be useful to workaround servers with problems allocating
credits, or to throttle the client to use smaller amount of
simultaneous i/o or to workaround server performance issues.
Also adds a cap, so that even if the server granted us more than
65000 credits due to a server bug, we would not use that many.
Signed-off-by: Steve French <steve.french@primarydata.com>
|
|
Remove the global file_list_lock to simplify cifs/smb3 locking and
have spinlocks that more closely match the information they are
protecting.
Add new tcon->open_file_lock and file->file_info_lock spinlocks.
Locks continue to follow a heirachy,
cifs_socket --> cifs_ses --> cifs_tcon --> cifs_file
where global tcp_ses_lock still protects socket and cifs_ses, while the
the newer locks protect the lower level structure's information
(tcon and cifs_file respectively).
CC: Stable <stable@vger.kernel.org>
Signed-off-by: Steve French <steve.french@primarydata.com>
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Reviewed-by: Germano Percossi <germano.percossi@citrix.com>
|
|
Right now, we send the tgid cross the wire. What we really want to send
though is a hashed fl_owner_t since samba treats this field as a generic
lockowner.
It turns out that because we enforce and release locks locally before
they are ever sent to the server, this patch makes no difference in
behavior. Still, setting OFD locks on the server using the process
pid seems wrong, so I think this patch still makes sense.
Signed-off-by: Jeff Layton <jlayton@poochiereds.net>
Signed-off-by: Steve French <smfrench@gmail.com>
Acked-by: Pavel Shilovsky <pshilovsky@samba.org>
Acked-by: Sachin Prabhu <sprabhu@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull cifs iovec cleanups from Al Viro.
* 'sendmsg.cifs' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
cifs: don't bother with kmap on read_pages side
cifs_readv_receive: use cifs_read_from_socket()
cifs: no need to wank with copying and advancing iovec on recvmsg side either
cifs: quit playing games with draining iovecs
cifs: merge the hash calculation helpers
|
|
Mostly direct substitution with occasional adjustment or removing
outdated comments.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Some callers of strtobool() were passing a pointer to unterminated
strings. In preparation of adding multi-character processing to
kstrtobool(), update the callers to not pass single-character pointers,
and switch to using the new kstrtobool_from_user() helper where
possible.
Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: Amitkumar Karwar <akarwar@marvell.com>
Cc: Nishant Sarmukadam <nishants@marvell.com>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: Steve French <sfrench@samba.org>
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Joe Perches <joe@perches.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
key generation. Thanks to Metze for helping with this.
Reviewed-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Steve French <steve.french@primarydata.com>
|
|
Currently the echo interval is set to 60 seconds using a macro. This
setting determines the interval at which echo requests are sent to the
server on an idling connection. This setting also affects the time
required for a connection to an unresponsive server to timeout.
Making this setting a tunable allows users to control the echo interval
times as well as control the time after which the connecting to an
unresponsive server times out.
To set echo interval, pass the echo_interval=n mount option.
Version four of the patch.
v2: Change MIN and MAX timeout values
v3: Remove incorrect comment in cifs_get_tcp_session
v4: Fix bug in setting echo_intervalw
Signed-off-by: Sachin Prabhu <sprabhu@redhat.com>
Acked-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com>
|
|
Since many servers (Windows clients, and non-clustered servers) do not
support persistent handles but do support resilient handles, allow
the user to specify a mount option "resilienthandles" in order
to get more reliable connections and less chance of data loss
(at least when SMB2.1 or later). Default resilient handle
timeout (120 seconds to recent Windows server) is used.
Reviewed-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Steve French <steve.french@primarydata.com>
|
|
Version 2 of the patch. Thanks to Dan Carpenter and the smatch
tool for finding a problem in the first version of this patch.
CC: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Steve French <steve.french@primarydata.com>
|
|
Validate "persistenthandles" and "nopersistenthandles" mount options against
the support the server claims in negotiate and tree connect SMB3 responses.
Signed-off-by: Steve French <steve.french@primarydata.com>
Reviewed-by: Pavel Shilovsky <pshilovsky@samba.org>
|
|
"nopersistenthandles" and "persistenthandles" mount options added.
The former will not request persistent handles on open even when
SMB3 negotiated and Continuous Availability share. The latter
will request persistent handles (as long as server notes the
capability in protocol negotiation) even if share is not Continuous
Availability share.
Signed-off-by: Steve French <steve.french@primarydata.com>
Reviewed-by: Pavel Shilovsky <pshilovsky@samba.org>
|
|
set integrity increases reliability of files stored on SMB3 servers.
Add ioctl to allow setting this on files on SMB3 and later mounts.
Signed-off-by: Steve French <steve.french@primarydata.com>
|
