summaryrefslogtreecommitdiff
path: root/fs/jbd2
AgeCommit message (Collapse)Author
2020-02-28jbd2: switch to use jbd2_journal_abort() when failed to submit the commit recordzhangyi (F)
[ Upstream commit d0a186e0d3e7ac05cc77da7c157dae5aa59f95d9 ] We invoke jbd2_journal_abort() to abort the journal and record errno in the jbd2 superblock when committing journal transaction besides the failure on submitting the commit record. But there is no need for the case and we can also invoke jbd2_journal_abort() instead of __jbd2_journal_abort_hard(). Fixes: 818d276ceb83a ("ext4: Add the journal checksum feature") Signed-off-by: zhangyi (F) <yi.zhang@huawei.com> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20191204124614.45424-2-yi.zhang@huawei.com Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-02-28ext4, jbd2: ensure panic when aborting with zero errnozhangyi (F)
[ Upstream commit 51f57b01e4a3c7d7bdceffd84de35144e8c538e7 ] JBD2_REC_ERR flag used to indicate the errno has been updated when jbd2 aborted, and then __ext4_abort() and ext4_handle_error() can invoke panic if ERRORS_PANIC is specified. But if the journal has been aborted with zero errno, jbd2_journal_abort() didn't set this flag so we can no longer panic. Fix this by always record the proper errno in the journal superblock. Fixes: 4327ba52afd03 ("ext4, jbd2: ensure entering into panic after recording an error in superblock") Signed-off-by: zhangyi (F) <yi.zhang@huawei.com> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20191204124614.45424-3-yi.zhang@huawei.com Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-02-28jbd2: clear JBD2_ABORT flag before journal_reset to update log tail info ↵Kai Li
when load journal [ Upstream commit a09decff5c32060639a685581c380f51b14e1fc2 ] If the journal is dirty when the filesystem is mounted, jbd2 will replay the journal but the journal superblock will not be updated by journal_reset() because JBD2_ABORT flag is still set (it was set in journal_init_common()). This is problematic because when a new transaction is then committed, it will be recorded in block 1 (journal->j_tail was set to 1 in journal_reset()). If unclean shutdown happens again before the journal superblock is updated, the new recorded transaction will not be replayed during the next mount (because of stale sb->s_start and sb->s_sequence values) which can lead to filesystem corruption. Fixes: 85e0c4e89c1b ("jbd2: if the journal is aborted then don't allow update of the log tail") Signed-off-by: Kai Li <li.kai4@h3c.com> Link: https://lore.kernel.org/r/20200111022542.5008-1-li.kai4@h3c.com Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-02-28jbd2: do not clear the BH_Mapped flag when forgetting a metadata bufferzhangyi (F)
[ Upstream commit c96dceeabf765d0b1b1f29c3bf50a5c01315b820 ] Commit 904cdbd41d74 ("jbd2: clear dirty flag when revoking a buffer from an older transaction") set the BH_Freed flag when forgetting a metadata buffer which belongs to the committing transaction, it indicate the committing process clear dirty bits when it is done with the buffer. But it also clear the BH_Mapped flag at the same time, which may trigger below NULL pointer oops when block_size < PAGE_SIZE. rmdir 1 kjournald2 mkdir 2 jbd2_journal_commit_transaction commit transaction N jbd2_journal_forget set_buffer_freed(bh1) jbd2_journal_commit_transaction commit transaction N+1 ... clear_buffer_mapped(bh1) ext4_getblk(bh2 ummapped) ... grow_dev_page init_page_buffers bh1->b_private=NULL bh2->b_private=NULL jbd2_journal_put_journal_head(jh1) __journal_remove_journal_head(hb1) jh1 is NULL and trigger oops *) Dir entry block bh1 and bh2 belongs to one page, and the bh2 has already been unmapped. For the metadata buffer we forgetting, we should always keep the mapped flag and clear the dirty flags is enough, so this patch pick out the these buffers and keep their BH_Mapped flag. Link: https://lore.kernel.org/r/20200213063821.30455-3-yi.zhang@huawei.com Fixes: 904cdbd41d74 ("jbd2: clear dirty flag when revoking a buffer from an older transaction") Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: zhangyi (F) <yi.zhang@huawei.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-02-28jbd2: move the clearing of b_modified flag to the journal_unmap_buffer()zhangyi (F)
[ Upstream commit 6a66a7ded12baa6ebbb2e3e82f8cb91382814839 ] There is no need to delay the clearing of b_modified flag to the transaction committing time when unmapping the journalled buffer, so just move it to the journal_unmap_buffer(). Link: https://lore.kernel.org/r/20200213063821.30455-2-yi.zhang@huawei.com Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: zhangyi (F) <yi.zhang@huawei.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-04jbd2: Fix statistics for the number of logged blocksJan Kara
[ Upstream commit 015c6033068208d6227612c878877919f3fcf6b6 ] jbd2 statistics counting number of blocks logged in a transaction was wrong. It didn't count the commit block and more importantly it didn't count revoke descriptor blocks. Make sure these get properly counted. Reviewed-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20191105164437.32602-13-jack@suse.cz Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-05-21jbd2: check superblock mapped prior to committingJiufei Xue
commit 742b06b5628f2cd23cb51a034cb54dc33c6162c5 upstream. We hit a BUG at fs/buffer.c:3057 if we detached the nbd device before unmounting ext4 filesystem. The typical chain of events leading to the BUG: jbd2_write_superblock submit_bh submit_bh_wbc BUG_ON(!buffer_mapped(bh)); The block device is removed and all the pages are invalidated. JBD2 was trying to write journal superblock to the block device which is no longer present. Fix this by checking the journal superblock's buffer head prior to submitting. Reported-by: Eric Ren <renzhen@linux.alibaba.com> Signed-off-by: Jiufei Xue <jiufei.xue@linux.alibaba.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Reviewed-by: Jan Kara <jack@suse.cz> Cc: stable@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-05jbd2: fix invalid descriptor block checksumluojiajun
[ Upstream commit 6e876c3dd205d30b0db6850e97a03d75457df007 ] In jbd2_journal_commit_transaction(), if we are in abort mode, we may flush the buffer without setting descriptor block checksum by goto start_journal_io. Then fs is mounted, jbd2_descriptor_block_csum_verify() failed. [ 271.379811] EXT4-fs (vdd): shut down requested (2) [ 271.381827] Aborting journal on device vdd-8. [ 271.597136] JBD2: Invalid checksum recovering block 22199 in log [ 271.598023] JBD2: recovery failed [ 271.598484] EXT4-fs (vdd): error loading journal Fix this problem by keep setting descriptor block checksum if the descriptor buffer is not NULL. This checksum problem can be reproduced by xfstests generic/388. Signed-off-by: luojiajun <luojiajun3@huawei.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-03-23jbd2: fix compile warning when using JBUFFER_TRACEzhangyi (F)
commit 01215d3edb0f384ddeaa5e4a22c1ae5ff634149f upstream. The jh pointer may be used uninitialized in the two cases below and the compiler complain about it when enabling JBUFFER_TRACE macro, fix them. In file included from fs/jbd2/transaction.c:19:0: fs/jbd2/transaction.c: In function ‘jbd2_journal_get_undo_access’: ./include/linux/jbd2.h:1637:38: warning: ‘jh’ is used uninitialized in this function [-Wuninitialized] #define JBUFFER_TRACE(jh, info) do { printk("%s: %d\n", __func__, jh->b_jcount);} while (0) ^ fs/jbd2/transaction.c:1219:23: note: ‘jh’ was declared here struct journal_head *jh; ^ In file included from fs/jbd2/transaction.c:19:0: fs/jbd2/transaction.c: In function ‘jbd2_journal_dirty_metadata’: ./include/linux/jbd2.h:1637:38: warning: ‘jh’ may be used uninitialized in this function [-Wmaybe-uninitialized] #define JBUFFER_TRACE(jh, info) do { printk("%s: %d\n", __func__, jh->b_jcount);} while (0) ^ fs/jbd2/transaction.c:1332:23: note: ‘jh’ was declared here struct journal_head *jh; ^ Signed-off-by: zhangyi (F) <yi.zhang@huawei.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@vger.kernel.org Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-23jbd2: clear dirty flag when revoking a buffer from an older transactionzhangyi (F)
commit 904cdbd41d749a476863a0ca41f6f396774f26e4 upstream. Now, we capture a data corruption problem on ext4 while we're truncating an extent index block. Imaging that if we are revoking a buffer which has been journaled by the committing transaction, the buffer's jbddirty flag will not be cleared in jbd2_journal_forget(), so the commit code will set the buffer dirty flag again after refile the buffer. fsx kjournald2 jbd2_journal_commit_transaction jbd2_journal_revoke commit phase 1~5... jbd2_journal_forget belongs to older transaction commit phase 6 jbddirty not clear __jbd2_journal_refile_buffer __jbd2_journal_unfile_buffer test_clear_buffer_jbddirty mark_buffer_dirty Finally, if the freed extent index block was allocated again as data block by some other files, it may corrupt the file data after writing cached pages later, such as during unmount time. (In general, clean_bdev_aliases() related helpers should be invoked after re-allocation to prevent the above corruption, but unfortunately we missed it when zeroout the head of extra extent blocks in ext4_ext_handle_unwritten_extents()). This patch mark buffer as freed and set j_next_transaction to the new transaction when it already belongs to the committing transaction in jbd2_journal_forget(), so that commit code knows it should clear dirty bits when it is done with the buffer. This problem can be reproduced by xfstests generic/455 easily with seeds (3246 3247 3248 3249). Signed-off-by: zhangyi (F) <yi.zhang@huawei.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Reviewed-by: Jan Kara <jack@suse.cz> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-13jbd2: fix use after free in jbd2_log_do_checkpoint()Jan Kara
commit ccd3c4373eacb044eb3832966299d13d2631f66f upstream. The code cleaning transaction's lists of checkpoint buffers has a bug where it increases bh refcount only after releasing journal->j_list_lock. Thus the following race is possible: CPU0 CPU1 jbd2_log_do_checkpoint() jbd2_journal_try_to_free_buffers() __journal_try_to_free_buffer(bh) ... while (transaction->t_checkpoint_io_list) ... if (buffer_locked(bh)) { <-- IO completes now, buffer gets unlocked --> spin_unlock(&journal->j_list_lock); spin_lock(&journal->j_list_lock); __jbd2_journal_remove_checkpoint(jh); spin_unlock(&journal->j_list_lock); try_to_free_buffers(page); get_bh(bh) <-- accesses freed bh Fix the problem by grabbing bh reference before unlocking journal->j_list_lock. Fixes: dc6e8d669cf5 ("jbd2: don't call get_bh() before calling __jbd2_journal_remove_checkpoint()") Fixes: be1158cc615f ("jbd2: fold __process_buffer() into jbd2_log_do_checkpoint()") Reported-by: syzbot+7f4a27091759e2fe7453@syzkaller.appspotmail.com CC: stable@vger.kernel.org Reviewed-by: Lukas Czerner <lczerner@redhat.com> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-11jbd2: don't mark block as modified if the handle is out of creditsTheodore Ts'o
commit e09463f220ca9a1a1ecfda84fcda658f99a1f12a upstream. Do not set the b_modified flag in block's journal head should not until after we're sure that jbd2_journal_dirty_metadat() will not abort with an error due to there not being enough space reserved in the jbd2 handle. Otherwise, future attempts to modify the buffer may lead a large number of spurious errors and warnings. This addresses CVE-2018-10883. https://bugzilla.kernel.org/show_bug.cgi?id=200071 Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-01ext4: set h_journal if there is a failure starting a reserved handleTheodore Ts'o
commit b2569260d55228b617bd82aba6d0db2faeeb4116 upstream. If ext4 tries to start a reserved handle via jbd2_journal_start_reserved(), and the journal has been aborted, this can result in a NULL pointer dereference. This is because the fields h_journal and h_transaction in the handle structure share the same memory, via a union, so jbd2_journal_start_reserved() will clear h_journal before calling start_this_handle(). If this function fails due to an aborted handle, h_journal will still be NULL, and the call to jbd2_journal_free_reserved() will pass a NULL journal to sub_reserve_credits(). This can be reproduced by running "kvm-xfstests -c dioread_nolock generic/475". Cc: stable@kernel.org # 3.11 Fixes: 8f7d89f36829b ("jbd2: transaction reservation support") Signed-off-by: Theodore Ts'o <tytso@mit.edu> Reviewed-by: Andreas Dilger <adilger@dilger.ca> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-29jbd2: fix use after free in kjournald2()Sahitya Tummala
commit dbfcef6b0f4012c57bc0b6e0e660d5ed12a5eaed upstream. Below is the synchronization issue between unmount and kjournald2 contexts, which results into use after free issue in kjournald2(). Fix this issue by using journal->j_state_lock to synchronize the wait_event() done in journal_kill_thread() and the wake_up() done in kjournald2(). TASK 1: umount cmd: |--jbd2_journal_destroy() { |--journal_kill_thread() { write_lock(&journal->j_state_lock); journal->j_flags |= JBD2_UNMOUNT; ... write_unlock(&journal->j_state_lock); wake_up(&journal->j_wait_commit); TASK 2 wakes up here: kjournald2() { ... checks JBD2_UNMOUNT flag and calls goto end-loop; ... end_loop: write_unlock(&journal->j_state_lock); journal->j_task = NULL; --> If this thread gets pre-empted here, then TASK 1 wait_event will exit even before this thread is completely done. wait_event(journal->j_wait_done_commit, journal->j_task == NULL); ... write_lock(&journal->j_state_lock); write_unlock(&journal->j_state_lock); } |--kfree(journal); } } wake_up(&journal->j_wait_done_commit); --> this step now results into use after free issue. } Signed-off-by: Sahitya Tummala <stummala@codeaurora.org> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: Amit Pundir <amit.pundir@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-24jbd2: if the journal is aborted then don't allow update of the log tailTheodore Ts'o
commit 85e0c4e89c1b864e763c4e3bb15d0b6d501ad5d9 upstream. This updates the jbd2 superblock unnecessarily, and on an abort we shouldn't truncate the log. Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-24jbd2: Fix lockdep splat with generic/270 testJan Kara
[ Upstream commit c52c47e4b4fbe4284602fc2ccbfc4a4d8dc05b49 ] I've hit a lockdep splat with generic/270 test complaining that: 3216.fsstress.b/3533 is trying to acquire lock: (jbd2_handle){++++..}, at: [<ffffffff813152e0>] jbd2_log_wait_commit+0x0/0x150 but task is already holding lock: (jbd2_handle){++++..}, at: [<ffffffff8130bd3b>] start_this_handle+0x35b/0x850 The underlying problem is that jbd2_journal_force_commit_nested() (called from ext4_should_retry_alloc()) may get called while a transaction handle is started. In such case it takes care to not wait for commit of the running transaction (which would deadlock) but only for a commit of a transaction that is already committing (which is safe as that doesn't wait for any filesystem locks). In fact there are also other callers of jbd2_log_wait_commit() that take care to pass tid of a transaction that is already committing and for those cases, the lockdep instrumentation is too restrictive and leading to false positive reports. Fix the problem by calling jbd2_might_wait_for_commit() from jbd2_log_wait_commit() only if the transaction isn't already committing. Fixes: 1eaa566d368b214d99cbb973647c1b0b8102a9ae Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-22jbd2: fix sphinx kernel-doc build warningsTobin C. Harding
commit f69120ce6c024aa634a8fc25787205e42f0ccbe6 upstream. Sphinx emits various (26) warnings when building make target 'htmldocs'. Currently struct definitions contain duplicate documentation, some as kernel-docs and some as standard c89 comments. We can reduce duplication while cleaning up the kernel docs. Move all kernel-docs to right above each struct member. Use the set of all existing comments (kernel-doc and c89). Add documentation for missing struct members and function arguments. Signed-off-by: Tobin C. Harding <me@tobin.cc> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-30jbd2: don't leak memory if setting up journal failsEric Biggers
commit cd9cb405e0b948363811dc74dbb2890f56f2cb87 upstream. In journal_init_common(), if we failed to allocate the j_wbuf array, or if we failed to create the buffer_head for the journal superblock, we leaked the memory allocated for the revocation tables. Fix this. Fixes: f0c9fd5458bacf7b12a9a579a727dc740cbe047e Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-12jbd2: don't leak modified metadata buffers on an aborted journalTheodore Ts'o
commit e112666b4959b25a8552d63bc564e1059be703e8 upstream. If the journal has been aborted, we shouldn't mark the underlying buffer head as dirty, since that will cause the metadata block to get modified. And if the journal has been aborted, we shouldn't allow this since it will almost certainly lead to a corrupted file system. Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-10-12jbd2: fix incorrect unlock on j_list_lockTaesoo Kim
When 'jh->b_transaction == transaction' (asserted by below) J_ASSERT_JH(jh, (jh->b_transaction == transaction || ... 'journal->j_list_lock' will be incorrectly unlocked, since the the lock is aquired only at the end of if / else-if statements (missing the else case). Signed-off-by: Taesoo Kim <tsgatesv@gmail.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Reviewed-by: Andreas Dilger <adilger@dilger.ca> Fixes: 6e4862a5bb9d12be87e4ea5d9a60836ebed71d28 Cc: stable@vger.kernel.org # 3.14+
2016-10-11fs: use mapping_set_error instead of opencoded set_bitMichal Hocko
The mapping_set_error() helper sets the correct AS_ flag for the mapping so there is no reason to open code it. Use the helper directly. [akpm@linux-foundation.org: be honest about conversion from -ENXIO to -EIO] Link: http://lkml.kernel.org/r/20160912111608.2588-2-mhocko@kernel.org Signed-off-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-09-22jbd2: fix lockdep annotation in add_transaction_credits()Jan Kara
Thomas has reported a lockdep splat hitting in add_transaction_credits(). The problem is that that function calls jbd2_might_wait_for_commit() while holding j_state_lock which is wrong (we do not really wait for transaction commit while holding that lock). Fix the problem by moving jbd2_might_wait_for_commit() into places where we are ready to wait for transaction commit and thus j_state_lock is unlocked. Cc: stable@vger.kernel.org Fixes: 1eaa566d368b214d99cbb973647c1b0b8102a9ae Reported-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2016-09-15jbd2: move more common code into journal_init_common()Geliang Tang
There are some repetitive code in jbd2_journal_init_dev() and jbd2_journal_init_inode(). So this patch moves the common code into journal_init_common() helper to simplify the code. And fix the coding style warnings reported by checkpatch.pl by the way. Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Reviewed-by: Jan Kara <jack@suse.cz>
2016-07-26Merge tag 'ext4_for_linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4 Pull ext4 updates from Ted Ts'o: "The major change this cycle is deleting ext4's copy of the file system encryption code and switching things over to using the copies in fs/crypto. I've updated the MAINTAINERS file to add an entry for fs/crypto listing Jaeguk Kim and myself as the maintainers. There are also a number of bug fixes, most notably for some problems found by American Fuzzy Lop (AFL) courtesy of Vegard Nossum. Also fixed is a writeback deadlock detected by generic/130, and some potential races in the metadata checksum code" * tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (21 commits) ext4: verify extent header depth ext4: short-cut orphan cleanup on error ext4: fix reference counting bug on block allocation error MAINTAINRES: fs-crypto maintainers update ext4 crypto: migrate into vfs's crypto engine ext2: fix filesystem deadlock while reading corrupted xattr block ext4: fix project quota accounting without quota limits enabled ext4: validate s_reserved_gdt_blocks on mount ext4: remove unused page_idx ext4: don't call ext4_should_journal_data() on the journal inode ext4: Fix WARN_ON_ONCE in ext4_commit_super() ext4: fix deadlock during page writeback ext4: correct error value of function verifying dx checksum ext4: avoid modifying checksum fields directly during checksum verification ext4: check for extents that wrap around jbd2: make journal y2038 safe jbd2: track more dependencies on transaction commit jbd2: move lockdep tracking to journal_s jbd2: move lockdep instrumentation for jbd2 handles ext4: respect the nobarrier mount option in nojournal mode ...
2016-07-26Merge branch 'for-4.8/core' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull core block updates from Jens Axboe: - the big change is the cleanup from Mike Christie, cleaning up our uses of command types and modified flags. This is what will throw some merge conflicts - regression fix for the above for btrfs, from Vincent - following up to the above, better packing of struct request from Christoph - a 2038 fix for blktrace from Arnd - a few trivial/spelling fixes from Bart Van Assche - a front merge check fix from Damien, which could cause issues on SMR drives - Atari partition fix from Gabriel - convert cfq to highres timers, since jiffies isn't granular enough for some devices these days. From Jan and Jeff - CFQ priority boost fix idle classes, from me - cleanup series from Ming, improving our bio/bvec iteration - a direct issue fix for blk-mq from Omar - fix for plug merging not involving the IO scheduler, like we do for other types of merges. From Tahsin - expose DAX type internally and through sysfs. From Toshi and Yigal * 'for-4.8/core' of git://git.kernel.dk/linux-block: (76 commits) block: Fix front merge check block: do not merge requests without consulting with io scheduler block: Fix spelling in a source code comment block: expose QUEUE_FLAG_DAX in sysfs block: add QUEUE_FLAG_DAX for devices to advertise their DAX support Btrfs: fix comparison in __btrfs_map_block() block: atari: Return early for unsupported sector size Doc: block: Fix a typo in queue-sysfs.txt cfq-iosched: Charge at least 1 jiffie instead of 1 ns cfq-iosched: Fix regression in bonnie++ rewrite performance cfq-iosched: Convert slice_resid from u64 to s64 block: Convert fifo_time from ulong to u64 blktrace: avoid using timespec block/blk-cgroup.c: Declare local symbols static block/bio-integrity.c: Add #include "blk.h" block/partition-generic.c: Remove a set-but-not-used variable block: bio: kill BIO_MAX_SIZE cfq-iosched: temporarily boost queue priority for idle classes block: drbd: avoid to use BIO_MAX_SIZE block: bio: remove BIO_MAX_SECTORS ...
2016-06-30jbd2: make journal y2038 safeArnd Bergmann
The jbd2 journal stores the commit time in 64-bit seconds and 32-bit nanoseconds, which avoids an overflow in 2038, but it gets the numbers from current_kernel_time(), which uses 'long' seconds on 32-bit architectures. This simply changes the code to call current_kernel_time64() so we use 64-bit seconds consistently. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Reviewed-by: Jan Kara <jack@suse.cz> Cc: stable@vger.kernel.org
2016-06-30jbd2: track more dependencies on transaction commitJan Kara
So far we were tracking only dependency on transaction commit due to starting a new handle (which may require commit to start a new transaction). Now add tracking also for other cases where we wait for transaction commit. This way lockdep can catch deadlocks e. g. because we call jbd2_journal_stop() for a synchronous handle with some locks held which rank below transaction start. Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2016-06-30jbd2: move lockdep tracking to journal_sJan Kara
Currently lockdep map is tracked in each journal handle. To be able to expand lockdep support to cover also other cases where we depend on transaction commit and where handle is not available, move lockdep map into struct journal_s. Since this makes the lockdep map shared for all handles, we have to use rwsem_acquire_read() for acquisitions now. Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2016-06-30jbd2: move lockdep instrumentation for jbd2 handlesJan Kara
The transaction the handle references is free to commit once we've decremented t_updates counter. Move the lockdep instrumentation to that place. Currently it was a bit later which did not really matter but subsequent improvements to lockdep instrumentation would cause false positives with it. Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2016-06-24jbd2: get rid of superfluous __GFP_REPEATMichal Hocko
jbd2_alloc is explicit about its allocation preferences wrt. the allocation size. Sub page allocations go to the slab allocator and larger are using either the page allocator or vmalloc. This is all good but the logic is unnecessarily complex. 1) as per Ted, the vmalloc fallback is a left-over: : jbd2_alloc is only passed in the bh->b_size, which can't be PAGE_SIZE, so : the code path that calls vmalloc() should never get called. When we : conveted jbd2_alloc() to suppor sub-page size allocations in commit : d2eecb039368, there was an assumption that it could be called with a size : greater than PAGE_SIZE, but that's certaily not true today. Moreover vmalloc allocation might even lead to a deadlock because the callers expect GFP_NOFS context while vmalloc is GFP_KERNEL. 2) __GFP_REPEAT for requests <= PAGE_ALLOC_COSTLY_ORDER is ignored since the flag was introduced. Let's simplify the code flow and use the slab allocator for sub-page requests and the page allocator for others. Even though order > 0 is not currently used as per above leave that option open. Link: http://lkml.kernel.org/r/1464599699-30131-18-git-send-email-mhocko@kernel.org Signed-off-by: Michal Hocko <mhocko@suse.com> Reviewed-by: Jan Kara <jack@suse.cz> Cc: "Theodore Ts'o" <tytso@mit.edu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-06-07block, drivers, fs: rename REQ_FLUSH to REQ_PREFLUSHMike Christie
To avoid confusion between REQ_OP_FLUSH, which is handled by request_fn drivers, and upper layers requesting the block layer perform a flush sequence along with possibly a WRITE, this patch renames REQ_FLUSH to REQ_PREFLUSH. Signed-off-by: Mike Christie <mchristi@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-06-07fs: have ll_rw_block users pass in op and flags separatelyMike Christie
This has ll_rw_block users pass in the operation and flags separately, so ll_rw_block can setup the bio op and bi_rw flags on the bio that is submitted. Signed-off-by: Mike Christie <mchristi@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-06-07fs: have submit_bh users pass in op and flags separatelyMike Christie
This has submit_bh users pass in the operation and flags separately, so submit_bh_wbc can setup the bio op and bi_rw flags on the bio that is submitted. Signed-off-by: Mike Christie <mchristi@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-05-24Merge tag 'ext4_for_linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4 Pull ext4 updates from Ted Ts'o: "Fix a number of bugs, most notably a potential stale data exposure after a crash and a potential BUG_ON crash if a file has the data journalling flag enabled while it has dirty delayed allocation blocks that haven't been written yet. Also fix a potential crash in the new project quota code and a maliciously corrupted file system. In addition, fix some DAX-specific bugs, including when there is a transient ENOSPC situation and races between writes via direct I/O and an mmap'ed segment that could lead to lost I/O. Finally the usual set of miscellaneous cleanups" * tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (23 commits) ext4: pre-zero allocated blocks for DAX IO ext4: refactor direct IO code ext4: fix race in transient ENOSPC detection ext4: handle transient ENOSPC properly for DAX dax: call get_blocks() with create == 1 for write faults to unwritten extents ext4: remove unmeetable inconsisteny check from ext4_find_extent() jbd2: remove excess descriptions for handle_s ext4: remove unnecessary bio get/put ext4: silence UBSAN in ext4_mb_init() ext4: address UBSAN warning in mb_find_order_for_block() ext4: fix oops on corrupted filesystem ext4: fix check of dqget() return value in ext4_ioctl_setproject() ext4: clean up error handling when orphan list is corrupted ext4: fix hang when processing corrupted orphaned inode list ext4: remove trailing \n from ext4_warning/ext4_error calls ext4: fix races between changing inode journal mode and ext4_writepages ext4: handle unwritten or delalloc buffers before enabling data journaling ext4: fix jbd2 handle extension in ext4_ext_truncate_extend_restart() ext4: do not ask jbd2 to write data for delalloc buffers jbd2: add support for avoiding data writes during transaction commits ...
2016-04-24jbd2: add support for avoiding data writes during transaction commitsJan Kara
Currently when filesystem needs to make sure data is on permanent storage before committing a transaction it adds inode to transaction's inode list. During transaction commit, jbd2 writes back all dirty buffers that have allocated underlying blocks and waits for the IO to finish. However when doing writeback for delayed allocated data, we allocate blocks and immediately submit the data. Thus asking jbd2 to write dirty pages just unnecessarily adds more work to jbd2 possibly writing back other redirtied blocks. Add support to jbd2 to allow filesystem to ask jbd2 to only wait for outstanding data writes before committing a transaction and thus avoid unnecessary writes. Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2016-04-18Merge branch 'master' into for-nextJiri Kosina
Sync with Linus' tree so that patches against newer codebase can be applied. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2016-04-18Doc: treewide : Fix typos in DocBook/filesystem.xmlMasanari Iida
This patch fix spelling typos found in DocBook/filesystem.xml. It is because the file was generated from comments in code, I have to fix the comments in codes, instead of xml file. Signed-off-by: Masanari Iida <standby24x7@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2016-04-04mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macrosKirill A. Shutemov
PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-13jbd2: do not fail journal because of frozen_buffer allocation failureMichal Hocko
Journal transaction might fail prematurely because the frozen_buffer is allocated by GFP_NOFS request: [ 72.440013] do_get_write_access: OOM for frozen_buffer [ 72.440014] EXT4-fs: ext4_reserve_inode_write:4729: aborting transaction: Out of memory in __ext4_journal_get_write_access [ 72.440015] EXT4-fs error (device sda1) in ext4_reserve_inode_write:4735: Out of memory (...snipped....) [ 72.495559] do_get_write_access: OOM for frozen_buffer [ 72.495560] EXT4-fs: ext4_reserve_inode_write:4729: aborting transaction: Out of memory in __ext4_journal_get_write_access [ 72.496839] do_get_write_access: OOM for frozen_buffer [ 72.496841] EXT4-fs: ext4_reserve_inode_write:4729: aborting transaction: Out of memory in __ext4_journal_get_write_access [ 72.505766] Aborting journal on device sda1-8. [ 72.505851] EXT4-fs (sda1): Remounting filesystem read-only This wasn't a problem until "mm: page_alloc: do not lock up GFP_NOFS allocations upon OOM" because small GPF_NOFS allocations never failed. This allocation seems essential for the journal and GFP_NOFS is too restrictive to the memory allocator so let's use __GFP_NOFAIL here to emulate the previous behavior. Signed-off-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2016-03-09jbd2: fix FS corruption possibility in jbd2_journal_destroy() on umount pathOGAWA Hirofumi
On umount path, jbd2_journal_destroy() writes latest transaction ID (->j_tail_sequence) to be used at next mount. The bug is that ->j_tail_sequence is not holding latest transaction ID in some cases. So, at next mount, there is chance to conflict with remaining (not overwritten yet) transactions. mount (id=10) write transaction (id=11) write transaction (id=12) umount (id=10) <= the bug doesn't write latest ID mount (id=10) write transaction (id=11) crash mount [recovery process] transaction (id=11) transaction (id=12) <= valid transaction ID, but old commit must not replay Like above, this bug become the cause of recovery failure, or FS corruption. So why ->j_tail_sequence doesn't point latest ID? Because if checkpoint transactions was reclaimed by memory pressure (i.e. bdev_try_to_free_page()), then ->j_tail_sequence is not updated. (And another case is, __jbd2_journal_clean_checkpoint_list() is called with empty transaction.) So in above cases, ->j_tail_sequence is not pointing latest transaction ID at umount path. Plus, REQ_FLUSH for checkpoint is not done too. So, to fix this problem with minimum changes, this patch updates ->j_tail_sequence, and issue REQ_FLUSH. (With more complex changes, some optimizations would be possible to avoid unnecessary REQ_FLUSH for example though.) BTW, journal->j_tail_sequence = ++journal->j_transaction_sequence; Increment of ->j_transaction_sequence seems to be unnecessary, but ext3 does this. Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@vger.kernel.org
2016-02-22jbd2: save some atomic ops in __JI_COMMIT_RUNNING handlingJan Kara
Currently we used atomic bit operations to manipulate __JI_COMMIT_RUNNING bit. However this is unnecessary as i_flags are always written and read under j_list_lock. So just change the operations to standard bit operations. Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2016-02-22jbd2: unify revoke and tag block checksum handlingJan Kara
Revoke and tag descriptor blocks are just different kinds of descriptor blocks and thus have checksum in the same place. Unify computation and checking of checksums for these. Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2016-02-22jbd2: factor out common descriptor block initializationJan Kara
Descriptor block header is initialized in several places. Factor out the common code into jbd2_journal_get_descriptor_buffer(). Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2016-02-22jbd2: remove unnecessary arguments of jbd2_journal_write_revoke_recordsJan Kara
jbd2_journal_write_revoke_records() takes journal pointer and write_op, although journal can be obtained from the passed transaction and write_op is always WRITE_SYNC. Remove these superfluous arguments. Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2016-01-06fs: use block_device name vsprintf helperDmitry Monakhov
Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-12-07Merge tag 'ext4_for_linus_stable' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4 Pull ext4 fixes from Ted Ts'o: "Ext4 bug fixes for v4.4, including fixes for post-2038 time encodings, some endian conversion problems with ext4 encryption, potential memory leaks after truncate in data=journal mode, and an ocfs2 regression caused by a jbd2 performance improvement" * tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: jbd2: fix null committed data return in undo_access ext4: add "static" to ext4_seq_##name##_fops struct ext4: fix an endianness bug in ext4_encrypted_follow_link() ext4: fix an endianness bug in ext4_encrypted_zeroout() jbd2: Fix unreclaimed pages after truncate in data=journal mode ext4: Fix handling of extended tv_sec
2015-12-04jbd2: fix null committed data return in undo_accessJunxiao Bi
introduced jbd2_write_access_granted() to improve write|undo_access speed, but missed to check the status of b_committed_data which caused a kernel panic on ocfs2. [ 6538.405938] ------------[ cut here ]------------ [ 6538.406686] kernel BUG at fs/ocfs2/suballoc.c:2400! [ 6538.406686] invalid opcode: 0000 [#1] SMP [ 6538.406686] Modules linked in: ocfs2 nfsd lockd grace nfs_acl auth_rpcgss sunrpc autofs4 ocfs2_dlmfs ocfs2_stack_o2cb ocfs2_dlm ocfs2_nodemanager ocfs2_stackglue configfs sd_mod sg ip6t_REJECT nf_reject_ipv6 nf_conntrack_ipv6 nf_defrag_ipv6 xt_state nf_conntrack ip6table_filter ip6_tables be2iscsi iscsi_boot_sysfs bnx2i cnic uio cxgb4i cxgb4 cxgb3i libcxgbi cxgb3 mdio ib_iser rdma_cm ib_cm iw_cm ib_sa ib_mad ib_core ib_addr ipv6 iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi ppdev xen_kbdfront xen_netfront xen_fbfront parport_pc parport pcspkr i2c_piix4 acpi_cpufreq ext4 jbd2 mbcache xen_blkfront floppy pata_acpi ata_generic ata_piix cirrus ttm drm_kms_helper drm fb_sys_fops sysimgblt sysfillrect i2c_core syscopyarea dm_mirror dm_region_hash dm_log dm_mod [ 6538.406686] CPU: 1 PID: 16265 Comm: mmap_truncate Not tainted 4.3.0 #1 [ 6538.406686] Hardware name: Xen HVM domU, BIOS 4.3.1OVM 05/14/2014 [ 6538.406686] task: ffff88007c2bab00 ti: ffff880075b78000 task.ti: ffff880075b78000 [ 6538.406686] RIP: 0010:[<ffffffffa06a286b>] [<ffffffffa06a286b>] ocfs2_block_group_clear_bits+0x23b/0x250 [ocfs2] [ 6538.406686] RSP: 0018:ffff880075b7b7f8 EFLAGS: 00010246 [ 6538.406686] RAX: ffff8800760c5b40 RBX: ffff88006c06a000 RCX: ffffffffa06e6df0 [ 6538.406686] RDX: 0000000000000000 RSI: ffff88007a6f6ea0 RDI: ffff88007a760430 [ 6538.406686] RBP: ffff880075b7b878 R08: 0000000000000002 R09: 0000000000000001 [ 6538.406686] R10: ffffffffa06769be R11: 0000000000000000 R12: 0000000000000001 [ 6538.406686] R13: ffffffffa06a1750 R14: 0000000000000001 R15: ffff88007a6f6ea0 [ 6538.406686] FS: 00007f17fde30720(0000) GS:ffff88007f040000(0000) knlGS:0000000000000000 [ 6538.406686] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 6538.406686] CR2: 0000000000601730 CR3: 000000007aea0000 CR4: 00000000000406e0 [ 6538.406686] Stack: [ 6538.406686] ffff88007c2bb5b0 ffff880075b7b8e0 ffff88007a7604b0 ffff88006c640800 [ 6538.406686] ffff88007a7604b0 ffff880075d77390 0000000075b7b878 ffffffffa06a309d [ 6538.406686] ffff880075d752d8 ffff880075b7b990 ffff880075b7b898 0000000000000000 [ 6538.406686] Call Trace: [ 6538.406686] [<ffffffffa06a309d>] ? ocfs2_read_group_descriptor+0x6d/0xa0 [ocfs2] [ 6538.406686] [<ffffffffa06a3654>] _ocfs2_free_suballoc_bits+0xe4/0x320 [ocfs2] [ 6538.406686] [<ffffffffa06a1750>] ? ocfs2_put_slot+0xf0/0xf0 [ocfs2] [ 6538.406686] [<ffffffffa06a397e>] _ocfs2_free_clusters+0xee/0x210 [ocfs2] [ 6538.406686] [<ffffffffa06a1750>] ? ocfs2_put_slot+0xf0/0xf0 [ocfs2] [ 6538.406686] [<ffffffffa06a1750>] ? ocfs2_put_slot+0xf0/0xf0 [ocfs2] [ 6538.406686] [<ffffffffa0682d50>] ? ocfs2_extend_trans+0x50/0x1a0 [ocfs2] [ 6538.406686] [<ffffffffa06a3ad5>] ocfs2_free_clusters+0x15/0x20 [ocfs2] [ 6538.406686] [<ffffffffa065072c>] ocfs2_replay_truncate_records+0xfc/0x290 [ocfs2] [ 6538.406686] [<ffffffffa06843ac>] ? ocfs2_start_trans+0xec/0x1d0 [ocfs2] [ 6538.406686] [<ffffffffa0654600>] __ocfs2_flush_truncate_log+0x140/0x2d0 [ocfs2] [ 6538.406686] [<ffffffffa0654394>] ? ocfs2_reserve_blocks_for_rec_trunc.clone.0+0x44/0x170 [ocfs2] [ 6538.406686] [<ffffffffa065acd4>] ocfs2_remove_btree_range+0x374/0x630 [ocfs2] [ 6538.406686] [<ffffffffa017486b>] ? jbd2_journal_stop+0x25b/0x470 [jbd2] [ 6538.406686] [<ffffffffa065d5b5>] ocfs2_commit_truncate+0x305/0x670 [ocfs2] [ 6538.406686] [<ffffffffa0683430>] ? ocfs2_journal_access_eb+0x20/0x20 [ocfs2] [ 6538.406686] [<ffffffffa067adb7>] ocfs2_truncate_file+0x297/0x380 [ocfs2] [ 6538.406686] [<ffffffffa01759e4>] ? jbd2_journal_begin_ordered_truncate+0x64/0xc0 [jbd2] [ 6538.406686] [<ffffffffa067c7a2>] ocfs2_setattr+0x572/0x860 [ocfs2] [ 6538.406686] [<ffffffff810e4a3f>] ? current_fs_time+0x3f/0x50 [ 6538.406686] [<ffffffff812124b7>] notify_change+0x1d7/0x340 [ 6538.406686] [<ffffffff8121abf9>] ? generic_getxattr+0x79/0x80 [ 6538.406686] [<ffffffff811f5876>] do_truncate+0x66/0x90 [ 6538.406686] [<ffffffff81120e30>] ? __audit_syscall_entry+0xb0/0x110 [ 6538.406686] [<ffffffff811f5bb3>] do_sys_ftruncate.clone.0+0xf3/0x120 [ 6538.406686] [<ffffffff811f5bee>] SyS_ftruncate+0xe/0x10 [ 6538.406686] [<ffffffff816aa2ae>] entry_SYSCALL_64_fastpath+0x12/0x71 [ 6538.406686] Code: 28 48 81 ee b0 04 00 00 48 8b 92 50 fb ff ff 48 8b 80 b0 03 00 00 48 39 90 88 00 00 00 0f 84 30 fe ff ff 0f 0b eb fe 0f 0b eb fe <0f> 0b 0f 1f 00 eb fb 66 66 66 66 66 2e 0f 1f 84 00 00 00 00 00 [ 6538.406686] RIP [<ffffffffa06a286b>] ocfs2_block_group_clear_bits+0x23b/0x250 [ocfs2] [ 6538.406686] RSP <ffff880075b7b7f8> [ 6538.691128] ---[ end trace 31cd7011d6770d7e ]--- [ 6538.694492] Kernel panic - not syncing: Fatal exception [ 6538.695484] Kernel Offset: disabled Fixes: de92c8caf16c("jbd2: speedup jbd2_journal_get_[write|undo]_access()") Cc: <stable@vger.kernel.org> Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2015-11-24jbd2: Fix unreclaimed pages after truncate in data=journal modeJan Kara
Ted and Namjae have reported that truncated pages don't get timely reclaimed after being truncated in data=journal mode. The following test triggers the issue easily: for (i = 0; i < 1000; i++) { pwrite(fd, buf, 1024*1024, 0); fsync(fd); fsync(fd); ftruncate(fd, 0); } The reason is that journal_unmap_buffer() finds that truncated buffers are not journalled (jh->b_transaction == NULL), they are part of checkpoint list of a transaction (jh->b_cp_transaction != NULL) and have been already written out (!buffer_dirty(bh)). We clean such buffers but we leave them in the checkpoint list. Since checkpoint transaction holds a reference to the journal head, these buffers cannot be released until the checkpoint transaction is cleaned up. And at that point we don't call release_buffer_page() anymore so pages detached from mapping are lingering in the system waiting for reclaim to find them and free them. Fix the problem by removing buffers from transaction checkpoint lists when journal_unmap_buffer() finds out they don't have to be there anymore. Reported-and-tested-by: Namjae Jeon <namjae.jeon@samsung.com> Fixes: de1b794130b130e77ffa975bb58cb843744f9ae5 Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@vger.kernel.org
2015-11-07Merge branch 'akpm' (patches from Andrew)Linus Torvalds
Merge second patch-bomb from Andrew Morton: - most of the rest of MM - procfs - lib/ updates - printk updates - bitops infrastructure tweaks - checkpatch updates - nilfs2 update - signals - various other misc bits: coredump, seqfile, kexec, pidns, zlib, ipc, dma-debug, dma-mapping, ... * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (102 commits) ipc,msg: drop dst nil validation in copy_msg include/linux/zutil.h: fix usage example of zlib_adler32() panic: release stale console lock to always get the logbuf printed out dma-debug: check nents in dma_sync_sg* dma-mapping: tidy up dma_parms default handling pidns: fix set/getpriority and ioprio_set/get in PRIO_USER mode kexec: use file name as the output message prefix fs, seqfile: always allow oom killer seq_file: reuse string_escape_str() fs/seq_file: use seq_* helpers in seq_hex_dump() coredump: change zap_threads() and zap_process() to use for_each_thread() coredump: ensure all coredumping tasks have SIGNAL_GROUP_COREDUMP signal: remove jffs2_garbage_collect_thread()->allow_signal(SIGCONT) signal: introduce kernel_signal_stop() to fix jffs2_garbage_collect_thread() signal: turn dequeue_signal_lock() into kernel_dequeue_signal() signals: kill block_all_signals() and unblock_all_signals() nilfs2: fix gcc uninitialized-variable warnings in powerpc build nilfs2: fix gcc unused-but-set-variable warnings MAINTAINERS: nilfs2: add header file for tracing nilfs2: add tracepoints for analyzing reading and writing metadata files ...
2015-11-06mm, page_alloc: distinguish between being unable to sleep, unwilling to ↵Mel Gorman
sleep and avoiding waking kswapd __GFP_WAIT has been used to identify atomic context in callers that hold spinlocks or are in interrupts. They are expected to be high priority and have access one of two watermarks lower than "min" which can be referred to as the "atomic reserve". __GFP_HIGH users get access to the first lower watermark and can be called the "high priority reserve". Over time, callers had a requirement to not block when fallback options were available. Some have abused __GFP_WAIT leading to a situation where an optimisitic allocation with a fallback option can access atomic reserves. This patch uses __GFP_ATOMIC to identify callers that are truely atomic, cannot sleep and have no alternative. High priority users continue to use __GFP_HIGH. __GFP_DIRECT_RECLAIM identifies callers that can sleep and are willing to enter direct reclaim. __GFP_KSWAPD_RECLAIM to identify callers that want to wake kswapd for background reclaim. __GFP_WAIT is redefined as a caller that is willing to enter direct reclaim and wake kswapd for background reclaim. This patch then converts a number of sites o __GFP_ATOMIC is used by callers that are high priority and have memory pools for those requests. GFP_ATOMIC uses this flag. o Callers that have a limited mempool to guarantee forward progress clear __GFP_DIRECT_RECLAIM but keep __GFP_KSWAPD_RECLAIM. bio allocations fall into this category where kswapd will still be woken but atomic reserves are not used as there is a one-entry mempool to guarantee progress. o Callers that are checking if they are non-blocking should use the helper gfpflags_allow_blocking() where possible. This is because checking for __GFP_WAIT as was done historically now can trigger false positives. Some exceptions like dm-crypt.c exist where the code intent is clearer if __GFP_DIRECT_RECLAIM is used instead of the helper due to flag manipulations. o Callers that built their own GFP flags instead of starting with GFP_KERNEL and friends now also need to specify __GFP_KSWAPD_RECLAIM. The first key hazard to watch out for is callers that removed __GFP_WAIT and was depending on access to atomic reserves for inconspicuous reasons. In some cases it may be appropriate for them to use __GFP_HIGH. The second key hazard is callers that assembled their own combination of GFP flags instead of starting with something like GFP_KERNEL. They may now wish to specify __GFP_KSWAPD_RECLAIM. It's almost certainly harmless if it's missed in most cases as other activity will wake kswapd. Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Christoph Lameter <cl@linux.com> Cc: David Rientjes <rientjes@google.com> Cc: Vitaly Wool <vitalywool@gmail.com> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit v1.2.3 (git 2.0.4) at 2024-06-20 14:21:59 +0000