summaryrefslogtreecommitdiff
path: root/fs/jffs2
AgeCommit message (Collapse)Author
2022-04-15jffs2: fix memory leak in jffs2_scan_mediumBaokun Li
commit 9cdd3128874f5fe759e2c4e1360ab7fb96a8d1df upstream. If an error is returned in jffs2_scan_eraseblock() and some memory has been added to the jffs2_summary *s, we can observe the following kmemleak report: -------------------------------------------- unreferenced object 0xffff88812b889c40 (size 64): comm "mount", pid 692, jiffies 4294838325 (age 34.288s) hex dump (first 32 bytes): 40 48 b5 14 81 88 ff ff 01 e0 31 00 00 00 50 00 @H........1...P. 00 00 01 00 00 00 01 00 00 00 02 00 00 00 09 08 ................ backtrace: [<ffffffffae93a3a3>] __kmalloc+0x613/0x910 [<ffffffffaf423b9c>] jffs2_sum_add_dirent_mem+0x5c/0xa0 [<ffffffffb0f3afa8>] jffs2_scan_medium.cold+0x36e5/0x4794 [<ffffffffb0f3dbe1>] jffs2_do_mount_fs.cold+0xa7/0x2267 [<ffffffffaf40acf3>] jffs2_do_fill_super+0x383/0xc30 [<ffffffffaf40c00a>] jffs2_fill_super+0x2ea/0x4c0 [<ffffffffb0315d64>] mtd_get_sb+0x254/0x400 [<ffffffffb0315f5f>] mtd_get_sb_by_nr+0x4f/0xd0 [<ffffffffb0316478>] get_tree_mtd+0x498/0x840 [<ffffffffaf40bd15>] jffs2_get_tree+0x25/0x30 [<ffffffffae9f358d>] vfs_get_tree+0x8d/0x2e0 [<ffffffffaea7a98f>] path_mount+0x50f/0x1e50 [<ffffffffaea7c3d7>] do_mount+0x107/0x130 [<ffffffffaea7c5c5>] __se_sys_mount+0x1c5/0x2f0 [<ffffffffaea7c917>] __x64_sys_mount+0xc7/0x160 [<ffffffffb10142f5>] do_syscall_64+0x45/0x70 unreferenced object 0xffff888114b54840 (size 32): comm "mount", pid 692, jiffies 4294838325 (age 34.288s) hex dump (first 32 bytes): c0 75 b5 14 81 88 ff ff 02 e0 02 00 00 00 02 00 .u.............. 00 00 84 00 00 00 44 00 00 00 6b 6b 6b 6b 6b a5 ......D...kkkkk. backtrace: [<ffffffffae93be24>] kmem_cache_alloc_trace+0x584/0x880 [<ffffffffaf423b04>] jffs2_sum_add_inode_mem+0x54/0x90 [<ffffffffb0f3bd44>] jffs2_scan_medium.cold+0x4481/0x4794 [...] unreferenced object 0xffff888114b57280 (size 32): comm "mount", pid 692, jiffies 4294838393 (age 34.357s) hex dump (first 32 bytes): 10 d5 6c 11 81 88 ff ff 08 e0 05 00 00 00 01 00 ..l............. 00 00 38 02 00 00 28 00 00 00 6b 6b 6b 6b 6b a5 ..8...(...kkkkk. backtrace: [<ffffffffae93be24>] kmem_cache_alloc_trace+0x584/0x880 [<ffffffffaf423c34>] jffs2_sum_add_xattr_mem+0x54/0x90 [<ffffffffb0f3a24f>] jffs2_scan_medium.cold+0x298c/0x4794 [...] unreferenced object 0xffff8881116cd510 (size 16): comm "mount", pid 692, jiffies 4294838395 (age 34.355s) hex dump (first 16 bytes): 00 00 00 00 00 00 00 00 09 e0 60 02 00 00 6b a5 ..........`...k. backtrace: [<ffffffffae93be24>] kmem_cache_alloc_trace+0x584/0x880 [<ffffffffaf423cc4>] jffs2_sum_add_xref_mem+0x54/0x90 [<ffffffffb0f3b2e3>] jffs2_scan_medium.cold+0x3a20/0x4794 [...] -------------------------------------------- Therefore, we should call jffs2_sum_reset_collected(s) on exit to release the memory added in s. In addition, a new tag "out_buf" is added to prevent the NULL pointer reference caused by s being NULL. (thanks to Zhang Yi for this analysis) Fixes: e631ddba5887 ("[JFFS2] Add erase block summary support (mount time improvement)") Cc: stable@vger.kernel.org Co-developed-with: Zhihao Cheng <chengzhihao1@huawei.com> Signed-off-by: Baokun Li <libaokun1@huawei.com> Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-15jffs2: fix memory leak in jffs2_do_mount_fsBaokun Li
commit d051cef784de4d54835f6b6836d98a8f6935772c upstream. If jffs2_build_filesystem() in jffs2_do_mount_fs() returns an error, we can observe the following kmemleak report: -------------------------------------------- unreferenced object 0xffff88811b25a640 (size 64): comm "mount", pid 691, jiffies 4294957728 (age 71.952s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<ffffffffa493be24>] kmem_cache_alloc_trace+0x584/0x880 [<ffffffffa5423a06>] jffs2_sum_init+0x86/0x130 [<ffffffffa5400e58>] jffs2_do_mount_fs+0x798/0xac0 [<ffffffffa540acf3>] jffs2_do_fill_super+0x383/0xc30 [<ffffffffa540c00a>] jffs2_fill_super+0x2ea/0x4c0 [...] unreferenced object 0xffff88812c760000 (size 65536): comm "mount", pid 691, jiffies 4294957728 (age 71.952s) hex dump (first 32 bytes): bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb ................ bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb ................ backtrace: [<ffffffffa493a449>] __kmalloc+0x6b9/0x910 [<ffffffffa5423a57>] jffs2_sum_init+0xd7/0x130 [<ffffffffa5400e58>] jffs2_do_mount_fs+0x798/0xac0 [<ffffffffa540acf3>] jffs2_do_fill_super+0x383/0xc30 [<ffffffffa540c00a>] jffs2_fill_super+0x2ea/0x4c0 [...] -------------------------------------------- This is because the resources allocated in jffs2_sum_init() are not released. Call jffs2_sum_exit() to release these resources to solve the problem. Fixes: e631ddba5887 ("[JFFS2] Add erase block summary support (mount time improvement)") Cc: stable@vger.kernel.org Signed-off-by: Baokun Li <libaokun1@huawei.com> Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-15jffs2: fix use-after-free in jffs2_clear_xattr_subsystemBaokun Li
commit 4c7c44ee1650677fbe89d86edbad9497b7679b5c upstream. When we mount a jffs2 image, assume that the first few blocks of the image are normal and contain at least one xattr-related inode, but the next block is abnormal. As a result, an error is returned in jffs2_scan_eraseblock(). jffs2_clear_xattr_subsystem() is then called in jffs2_build_filesystem() and then again in jffs2_do_fill_super(). Finally we can observe the following report: ================================================================== BUG: KASAN: use-after-free in jffs2_clear_xattr_subsystem+0x95/0x6ac Read of size 8 at addr ffff8881243384e0 by task mount/719 Call Trace: dump_stack+0x115/0x16b jffs2_clear_xattr_subsystem+0x95/0x6ac jffs2_do_fill_super+0x84f/0xc30 jffs2_fill_super+0x2ea/0x4c0 mtd_get_sb+0x254/0x400 mtd_get_sb_by_nr+0x4f/0xd0 get_tree_mtd+0x498/0x840 jffs2_get_tree+0x25/0x30 vfs_get_tree+0x8d/0x2e0 path_mount+0x50f/0x1e50 do_mount+0x107/0x130 __se_sys_mount+0x1c5/0x2f0 __x64_sys_mount+0xc7/0x160 do_syscall_64+0x45/0x70 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Allocated by task 719: kasan_save_stack+0x23/0x60 __kasan_kmalloc.constprop.0+0x10b/0x120 kasan_slab_alloc+0x12/0x20 kmem_cache_alloc+0x1c0/0x870 jffs2_alloc_xattr_ref+0x2f/0xa0 jffs2_scan_medium.cold+0x3713/0x4794 jffs2_do_mount_fs.cold+0xa7/0x2253 jffs2_do_fill_super+0x383/0xc30 jffs2_fill_super+0x2ea/0x4c0 [...] Freed by task 719: kmem_cache_free+0xcc/0x7b0 jffs2_free_xattr_ref+0x78/0x98 jffs2_clear_xattr_subsystem+0xa1/0x6ac jffs2_do_mount_fs.cold+0x5e6/0x2253 jffs2_do_fill_super+0x383/0xc30 jffs2_fill_super+0x2ea/0x4c0 [...] The buggy address belongs to the object at ffff8881243384b8 which belongs to the cache jffs2_xattr_ref of size 48 The buggy address is located 40 bytes inside of 48-byte region [ffff8881243384b8, ffff8881243384e8) [...] ================================================================== The triggering of the BUG is shown in the following stack: ----------------------------------------------------------- jffs2_fill_super jffs2_do_fill_super jffs2_do_mount_fs jffs2_build_filesystem jffs2_scan_medium jffs2_scan_eraseblock <--- ERROR jffs2_clear_xattr_subsystem <--- free jffs2_clear_xattr_subsystem <--- free again ----------------------------------------------------------- An error is returned in jffs2_do_mount_fs(). If the error is returned by jffs2_sum_init(), the jffs2_clear_xattr_subsystem() does not need to be executed. If the error is returned by jffs2_build_filesystem(), the jffs2_clear_xattr_subsystem() also does not need to be executed again. So move jffs2_clear_xattr_subsystem() from 'out_inohash' to 'out_root' to fix this UAF problem. Fixes: aa98d7cf59b5 ("[JFFS2][XATTR] XATTR support on JFFS2 (version. 5)") Cc: stable@vger.kernel.org Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Baokun Li <libaokun1@huawei.com> Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-27jffs2: GC deadlock reading a page that is used in jffs2_write_begin()Kyeong Yoo
[ Upstream commit aa39cc675799bc92da153af9a13d6f969c348e82 ] GC task can deadlock in read_cache_page() because it may attempt to release a page that is actually allocated by another task in jffs2_write_begin(). The reason is that in jffs2_write_begin() there is a small window a cache page is allocated for use but not set Uptodate yet. This ends up with a deadlock between two tasks: 1) A task (e.g. file copy) - jffs2_write_begin() locks a cache page - jffs2_write_end() tries to lock "alloc_sem" from jffs2_reserve_space() <-- STUCK 2) GC task (jffs2_gcd_mtd3) - jffs2_garbage_collect_pass() locks "alloc_sem" - try to lock the same cache page in read_cache_page() <-- STUCK So to avoid this deadlock, hold "alloc_sem" in jffs2_write_begin() while reading data in a cache page. Signed-off-by: Kyeong Yoo <kyeong.yoo@alliedtelesis.co.nz> Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-05-11jffs2: check the validity of dstlen in jffs2_zlib_compress()Yang Yang
commit 90ada91f4610c5ef11bc52576516d96c496fc3f1 upstream. KASAN reports a BUG when download file in jffs2 filesystem.It is because when dstlen == 1, cpage_out will write array out of bounds. Actually, data will not be compressed in jffs2_zlib_compress() if data's length less than 4. [ 393.799778] BUG: KASAN: slab-out-of-bounds in jffs2_rtime_compress+0x214/0x2f0 at addr ffff800062e3b281 [ 393.809166] Write of size 1 by task tftp/2918 [ 393.813526] CPU: 3 PID: 2918 Comm: tftp Tainted: G B 4.9.115-rt93-EMBSYS-CGEL-6.1.R6-dirty #1 [ 393.823173] Hardware name: LS1043A RDB Board (DT) [ 393.827870] Call trace: [ 393.830322] [<ffff20000808c700>] dump_backtrace+0x0/0x2f0 [ 393.835721] [<ffff20000808ca04>] show_stack+0x14/0x20 [ 393.840774] [<ffff2000086ef700>] dump_stack+0x90/0xb0 [ 393.845829] [<ffff20000827b19c>] kasan_object_err+0x24/0x80 [ 393.851402] [<ffff20000827b404>] kasan_report_error+0x1b4/0x4d8 [ 393.857323] [<ffff20000827bae8>] kasan_report+0x38/0x40 [ 393.862548] [<ffff200008279d44>] __asan_store1+0x4c/0x58 [ 393.867859] [<ffff2000084ce2ec>] jffs2_rtime_compress+0x214/0x2f0 [ 393.873955] [<ffff2000084bb3b0>] jffs2_selected_compress+0x178/0x2a0 [ 393.880308] [<ffff2000084bb530>] jffs2_compress+0x58/0x478 [ 393.885796] [<ffff2000084c5b34>] jffs2_write_inode_range+0x13c/0x450 [ 393.892150] [<ffff2000084be0b8>] jffs2_write_end+0x2a8/0x4a0 [ 393.897811] [<ffff2000081f3008>] generic_perform_write+0x1c0/0x280 [ 393.903990] [<ffff2000081f5074>] __generic_file_write_iter+0x1c4/0x228 [ 393.910517] [<ffff2000081f5210>] generic_file_write_iter+0x138/0x288 [ 393.916870] [<ffff20000829ec1c>] __vfs_write+0x1b4/0x238 [ 393.922181] [<ffff20000829ff00>] vfs_write+0xd0/0x238 [ 393.927232] [<ffff2000082a1ba8>] SyS_write+0xa0/0x110 [ 393.932283] [<ffff20000808429c>] __sys_trace_return+0x0/0x4 [ 393.937851] Object at ffff800062e3b280, in cache kmalloc-64 size: 64 [ 393.944197] Allocated: [ 393.946552] PID = 2918 [ 393.948913] save_stack_trace_tsk+0x0/0x220 [ 393.953096] save_stack_trace+0x18/0x20 [ 393.956932] kasan_kmalloc+0xd8/0x188 [ 393.960594] __kmalloc+0x144/0x238 [ 393.963994] jffs2_selected_compress+0x48/0x2a0 [ 393.968524] jffs2_compress+0x58/0x478 [ 393.972273] jffs2_write_inode_range+0x13c/0x450 [ 393.976889] jffs2_write_end+0x2a8/0x4a0 [ 393.980810] generic_perform_write+0x1c0/0x280 [ 393.985251] __generic_file_write_iter+0x1c4/0x228 [ 393.990040] generic_file_write_iter+0x138/0x288 [ 393.994655] __vfs_write+0x1b4/0x238 [ 393.998228] vfs_write+0xd0/0x238 [ 394.001543] SyS_write+0xa0/0x110 [ 394.004856] __sys_trace_return+0x0/0x4 [ 394.008684] Freed: [ 394.010691] PID = 2918 [ 394.013051] save_stack_trace_tsk+0x0/0x220 [ 394.017233] save_stack_trace+0x18/0x20 [ 394.021069] kasan_slab_free+0x88/0x188 [ 394.024902] kfree+0x6c/0x1d8 [ 394.027868] jffs2_sum_write_sumnode+0x2c4/0x880 [ 394.032486] jffs2_do_reserve_space+0x198/0x598 [ 394.037016] jffs2_reserve_space+0x3f8/0x4d8 [ 394.041286] jffs2_write_inode_range+0xf0/0x450 [ 394.045816] jffs2_write_end+0x2a8/0x4a0 [ 394.049737] generic_perform_write+0x1c0/0x280 [ 394.054179] __generic_file_write_iter+0x1c4/0x228 [ 394.058968] generic_file_write_iter+0x138/0x288 [ 394.063583] __vfs_write+0x1b4/0x238 [ 394.067157] vfs_write+0xd0/0x238 [ 394.070470] SyS_write+0xa0/0x110 [ 394.073783] __sys_trace_return+0x0/0x4 [ 394.077612] Memory state around the buggy address: [ 394.082404] ffff800062e3b180: 00 00 00 00 00 00 00 00 fc fc fc fc fc fc fc fc [ 394.089623] ffff800062e3b200: 00 00 00 00 00 00 00 00 fc fc fc fc fc fc fc fc [ 394.096842] >ffff800062e3b280: 01 fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 394.104056] ^ [ 394.107283] ffff800062e3b300: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc [ 394.114502] ffff800062e3b380: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc [ 394.121718] ================================================================== Signed-off-by: Yang Yang <yang.yang29@zte.com.cn> Cc: Joel Stanley <joel@jms.id.au> Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-11jffs2: Fix kasan slab-out-of-bounds problemlizhe
commit 960b9a8a7676b9054d8b46a2c7db52a0c8766b56 upstream. KASAN report a slab-out-of-bounds problem. The logs are listed below. It is because in function jffs2_scan_dirent_node, we alloc "checkedlen+1" bytes for fd->name and we check crc with length rd->nsize. If checkedlen is less than rd->nsize, it will cause the slab-out-of-bounds problem. jffs2: Dirent at *** has zeroes in name. Truncating to %d char ================================================================== BUG: KASAN: slab-out-of-bounds in crc32_le+0x1ce/0x260 at addr ffff8800842cf2d1 Read of size 1 by task test_JFFS2/915 ============================================================================= BUG kmalloc-64 (Tainted: G B O ): kasan: bad access detected ----------------------------------------------------------------------------- INFO: Allocated in jffs2_alloc_full_dirent+0x2a/0x40 age=0 cpu=1 pid=915 ___slab_alloc+0x580/0x5f0 __slab_alloc.isra.24+0x4e/0x64 __kmalloc+0x170/0x300 jffs2_alloc_full_dirent+0x2a/0x40 jffs2_scan_eraseblock+0x1ca4/0x3b64 jffs2_scan_medium+0x285/0xfe0 jffs2_do_mount_fs+0x5fb/0x1bbc jffs2_do_fill_super+0x245/0x6f0 jffs2_fill_super+0x287/0x2e0 mount_mtd_aux.isra.0+0x9a/0x144 mount_mtd+0x222/0x2f0 jffs2_mount+0x41/0x60 mount_fs+0x63/0x230 vfs_kern_mount.part.6+0x6c/0x1f4 do_mount+0xae8/0x1940 SyS_mount+0x105/0x1d0 INFO: Freed in jffs2_free_full_dirent+0x22/0x40 age=27 cpu=1 pid=915 __slab_free+0x372/0x4e4 kfree+0x1d4/0x20c jffs2_free_full_dirent+0x22/0x40 jffs2_build_remove_unlinked_inode+0x17a/0x1e4 jffs2_do_mount_fs+0x1646/0x1bbc jffs2_do_fill_super+0x245/0x6f0 jffs2_fill_super+0x287/0x2e0 mount_mtd_aux.isra.0+0x9a/0x144 mount_mtd+0x222/0x2f0 jffs2_mount+0x41/0x60 mount_fs+0x63/0x230 vfs_kern_mount.part.6+0x6c/0x1f4 do_mount+0xae8/0x1940 SyS_mount+0x105/0x1d0 entry_SYSCALL_64_fastpath+0x1e/0x97 Call Trace: [<ffffffff815befef>] dump_stack+0x59/0x7e [<ffffffff812d1d65>] print_trailer+0x125/0x1b0 [<ffffffff812d82c8>] object_err+0x34/0x40 [<ffffffff812dadef>] kasan_report.part.1+0x21f/0x534 [<ffffffff81132401>] ? vprintk+0x2d/0x40 [<ffffffff815f1ee2>] ? crc32_le+0x1ce/0x260 [<ffffffff812db41a>] kasan_report+0x26/0x30 [<ffffffff812d9fc1>] __asan_load1+0x3d/0x50 [<ffffffff815f1ee2>] crc32_le+0x1ce/0x260 [<ffffffff814764ae>] ? jffs2_alloc_full_dirent+0x2a/0x40 [<ffffffff81485cec>] jffs2_scan_eraseblock+0x1d0c/0x3b64 [<ffffffff81488813>] ? jffs2_scan_medium+0xccf/0xfe0 [<ffffffff81483fe0>] ? jffs2_scan_make_ino_cache+0x14c/0x14c [<ffffffff812da3e9>] ? kasan_unpoison_shadow+0x35/0x50 [<ffffffff812da3e9>] ? kasan_unpoison_shadow+0x35/0x50 [<ffffffff812da462>] ? kasan_kmalloc+0x5e/0x70 [<ffffffff812d5d90>] ? kmem_cache_alloc_trace+0x10c/0x2cc [<ffffffff818169fb>] ? mtd_point+0xf7/0x130 [<ffffffff81487dc9>] jffs2_scan_medium+0x285/0xfe0 [<ffffffff81487b44>] ? jffs2_scan_eraseblock+0x3b64/0x3b64 [<ffffffff812da3e9>] ? kasan_unpoison_shadow+0x35/0x50 [<ffffffff812da3e9>] ? kasan_unpoison_shadow+0x35/0x50 [<ffffffff812da462>] ? kasan_kmalloc+0x5e/0x70 [<ffffffff812d57df>] ? __kmalloc+0x12b/0x300 [<ffffffff812da462>] ? kasan_kmalloc+0x5e/0x70 [<ffffffff814a2753>] ? jffs2_sum_init+0x9f/0x240 [<ffffffff8148b2ff>] jffs2_do_mount_fs+0x5fb/0x1bbc [<ffffffff8148ad04>] ? jffs2_del_noinode_dirent+0x640/0x640 [<ffffffff812da462>] ? kasan_kmalloc+0x5e/0x70 [<ffffffff81127c5b>] ? __init_rwsem+0x97/0xac [<ffffffff81492349>] jffs2_do_fill_super+0x245/0x6f0 [<ffffffff81493c5b>] jffs2_fill_super+0x287/0x2e0 [<ffffffff814939d4>] ? jffs2_parse_options+0x594/0x594 [<ffffffff81819bea>] mount_mtd_aux.isra.0+0x9a/0x144 [<ffffffff81819eb6>] mount_mtd+0x222/0x2f0 [<ffffffff814939d4>] ? jffs2_parse_options+0x594/0x594 [<ffffffff81819c94>] ? mount_mtd_aux.isra.0+0x144/0x144 [<ffffffff81258757>] ? free_pages+0x13/0x1c [<ffffffff814fa0ac>] ? selinux_sb_copy_data+0x278/0x2e0 [<ffffffff81492b35>] jffs2_mount+0x41/0x60 [<ffffffff81302fb7>] mount_fs+0x63/0x230 [<ffffffff8133755f>] ? alloc_vfsmnt+0x32f/0x3b0 [<ffffffff81337f2c>] vfs_kern_mount.part.6+0x6c/0x1f4 [<ffffffff8133ceec>] do_mount+0xae8/0x1940 [<ffffffff811b94e0>] ? audit_filter_rules.constprop.6+0x1d10/0x1d10 [<ffffffff8133c404>] ? copy_mount_string+0x40/0x40 [<ffffffff812cbf78>] ? alloc_pages_current+0xa4/0x1bc [<ffffffff81253a89>] ? __get_free_pages+0x25/0x50 [<ffffffff81338993>] ? copy_mount_options.part.17+0x183/0x264 [<ffffffff8133e3a9>] SyS_mount+0x105/0x1d0 [<ffffffff8133e2a4>] ? copy_mnt_ns+0x560/0x560 [<ffffffff810e8391>] ? msa_space_switch_handler+0x13d/0x190 [<ffffffff81be184a>] entry_SYSCALL_64_fastpath+0x1e/0x97 [<ffffffff810e9274>] ? msa_space_switch+0xb0/0xe0 Memory state around the buggy address: ffff8800842cf180: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff8800842cf200: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc >ffff8800842cf280: fc fc fc fc fc fc 00 00 00 00 01 fc fc fc fc fc ^ ffff8800842cf300: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff8800842cf380: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ================================================================== Cc: stable@vger.kernel.org Reported-by: Kunkun Xu <xukunkun1@huawei.com> Signed-off-by: lizhe <lizhe67@huawei.com> Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-04jffs2: fix use after free in jffs2_sum_write_data()Tom Rix
[ Upstream commit 19646447ad3a680d2ab08c097585b7d96a66126b ] clang static analysis reports this problem fs/jffs2/summary.c:794:31: warning: Use of memory after it is freed c->summary->sum_list_head = temp->u.next; ^~~~~~~~~~~~ In jffs2_sum_write_data(), in a loop summary data is handles a node at a time. When it has written out the node it is removed the summary list, and the node is deleted. In the corner case when a JFFS2_FEATURE_RWCOMPAT_COPY is seen, a call is made to jffs2_sum_disable_collecting(). jffs2_sum_disable_collecting() deletes the whole list which conflicts with the loop's deleting the list by parts. To preserve the old behavior of stopping the write midway, bail out of the loop after disabling summary collection. Fixes: 6171586a7ae5 ("[JFFS2] Correct handling of JFFS2_FEATURE_RWCOMPAT_COPY nodes.") Signed-off-by: Tom Rix <trix@redhat.com> Reviewed-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-01-06jffs2: Fix NULL pointer dereference in rp_size fs option parsingJamie Iles
[ Upstream commit a61df3c413e49b0042f9caf774c58512d1cc71b7 ] syzkaller found the following JFFS2 splat: Unable to handle kernel paging request at virtual address dfffa00000000001 Mem abort info: ESR = 0x96000004 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 Data abort info: ISV = 0, ISS = 0x00000004 CM = 0, WnR = 0 [dfffa00000000001] address between user and kernel address ranges Internal error: Oops: 96000004 [#1] SMP Dumping ftrace buffer: (ftrace buffer empty) Modules linked in: CPU: 0 PID: 12745 Comm: syz-executor.5 Tainted: G S 5.9.0-rc8+ #98 Hardware name: linux,dummy-virt (DT) pstate: 20400005 (nzCv daif +PAN -UAO BTYPE=--) pc : jffs2_parse_param+0x138/0x308 fs/jffs2/super.c:206 lr : jffs2_parse_param+0x108/0x308 fs/jffs2/super.c:205 sp : ffff000022a57910 x29: ffff000022a57910 x28: 0000000000000000 x27: ffff000057634008 x26: 000000000000d800 x25: 000000000000d800 x24: ffff0000271a9000 x23: ffffa0001adb5dc0 x22: ffff000023fdcf00 x21: 1fffe0000454af2c x20: ffff000024cc9400 x19: 0000000000000000 x18: 0000000000000000 x17: 0000000000000000 x16: ffffa000102dbdd0 x15: 0000000000000000 x14: ffffa000109e44bc x13: ffffa00010a3a26c x12: ffff80000476e0b3 x11: 1fffe0000476e0b2 x10: ffff80000476e0b2 x9 : ffffa00010a3ad60 x8 : ffff000023b70593 x7 : 0000000000000003 x6 : 00000000f1f1f1f1 x5 : ffff000023fdcf00 x4 : 0000000000000002 x3 : ffffa00010000000 x2 : 0000000000000001 x1 : dfffa00000000000 x0 : 0000000000000008 Call trace: jffs2_parse_param+0x138/0x308 fs/jffs2/super.c:206 vfs_parse_fs_param+0x234/0x4e8 fs/fs_context.c:117 vfs_parse_fs_string+0xe8/0x148 fs/fs_context.c:161 generic_parse_monolithic+0x17c/0x208 fs/fs_context.c:201 parse_monolithic_mount_data+0x7c/0xa8 fs/fs_context.c:649 do_new_mount fs/namespace.c:2871 [inline] path_mount+0x548/0x1da8 fs/namespace.c:3192 do_mount+0x124/0x138 fs/namespace.c:3205 __do_sys_mount fs/namespace.c:3413 [inline] __se_sys_mount fs/namespace.c:3390 [inline] __arm64_sys_mount+0x164/0x238 fs/namespace.c:3390 __invoke_syscall arch/arm64/kernel/syscall.c:36 [inline] invoke_syscall arch/arm64/kernel/syscall.c:48 [inline] el0_svc_common.constprop.0+0x15c/0x598 arch/arm64/kernel/syscall.c:149 do_el0_svc+0x60/0x150 arch/arm64/kernel/syscall.c:195 el0_svc+0x34/0xb0 arch/arm64/kernel/entry-common.c:226 el0_sync_handler+0xc8/0x5b4 arch/arm64/kernel/entry-common.c:236 el0_sync+0x15c/0x180 arch/arm64/kernel/entry.S:663 Code: d2d40001 f2fbffe1 91002260 d343fc02 (38e16841) ---[ end trace 4edf690313deda44 ]--- This is because since ec10a24f10c8, the option parsing happens before fill_super and so the MTD device isn't associated with the filesystem. Defer the size check until there is a valid association. Fixes: ec10a24f10c8 ("vfs: Convert jffs2 to use the new mount API") Cc: <stable@vger.kernel.org> Cc: David Howells <dhowells@redhat.com> Signed-off-by: Jamie Iles <jamie@nuviainc.com> Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-01-06jffs2: Allow setting rp_size to zero during remountinglizhe
[ Upstream commit cd3ed3c73ac671ff6b0230ccb72b8300292d3643 ] Set rp_size to zero will be ignore during remounting. The method to identify whether we input a remounting option of rp_size is to check if the rp_size input is zero. It can not work well if we pass "rp_size=0". This patch add a bool variable "set_rp_size" to fix this problem. Reported-by: Jubin Zhong <zhongjubin@huawei.com> Signed-off-by: lizhe <lizhe67@huawei.com> Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-12-30jffs2: Fix ignoring mounting options problem during remountinglizhe
commit 08cd274f9b8283a1da93e2ccab216a336da83525 upstream. The jffs2 mount options will be ignored when remounting jffs2. It can be easily reproduced with the steps listed below. 1. mount -t jffs2 -o compr=none /dev/mtdblockx /mnt 2. mount -o remount compr=zlib /mnt Since ec10a24f10c8, the option parsing happens before fill_super and then pass fc, which contains the options parsing results, to function jffs2_reconfigure during remounting. But function jffs2_reconfigure do not update c->mount_opts. This patch add a function jffs2_update_mount_opts to fix this problem. By the way, I notice that tmpfs use the same way to update remounting options. If it is necessary to unify them? Cc: <stable@vger.kernel.org> Fixes: ec10a24f10c8 ("vfs: Convert jffs2 to use the new mount API") Signed-off-by: lizhe <lizhe67@huawei.com> Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-12-30jffs2: Fix GC exit abnormallyZhe Li
commit 9afc9a8a4909fece0e911e72b1060614ba2f7969 upstream. The log of this problem is: jffs2: Error garbage collecting node at 0x***! jffs2: No space for garbage collection. Aborting GC thread This is because GC believe that it do nothing, so it abort. After going over the image of jffs2, I find a scene that can trigger this problem stably. The scene is: there is a normal dirent node at summary-area, but abnormal at corresponding not-summary-area with error name_crc. The reason that GC exit abnormally is because it find that abnormal dirent node to GC, but when it goes to function jffs2_add_fd_to_list, it cannot meet the condition listed below: if ((*prev)->nhash == new->nhash && !strcmp((*prev)->name, new->name)) So no node is marked obsolete, statistical information of erase_block do not change, which cause GC exit abnormally. The root cause of this problem is: we do not check the name_crc of the abnormal dirent node with summary is enabled. Noticed that in function jffs2_scan_dirent_node, we use function jffs2_scan_dirty_space to deal with the dirent node with error name_crc. So this patch add a checking code in function read_direntry to ensure the correctness of dirent node. If checked failed, the dirent node will be marked obsolete so GC will pass this node and this problem will be fixed. Cc: <stable@vger.kernel.org> Signed-off-by: Zhe Li <lizhe67@huawei.com> Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-08-26jffs2: fix UAF problemZhe Li
[ Upstream commit 798b7347e4f29553db4b996393caf12f5b233daf ] The log of UAF problem is listed below. BUG: KASAN: use-after-free in jffs2_rmdir+0xa4/0x1cc [jffs2] at addr c1f165fc Read of size 4 by task rm/8283 ============================================================================= BUG kmalloc-32 (Tainted: P B O ): kasan: bad access detected ----------------------------------------------------------------------------- INFO: Allocated in 0xbbbbbbbb age=3054364 cpu=0 pid=0 0xb0bba6ef jffs2_write_dirent+0x11c/0x9c8 [jffs2] __slab_alloc.isra.21.constprop.25+0x2c/0x44 __kmalloc+0x1dc/0x370 jffs2_write_dirent+0x11c/0x9c8 [jffs2] jffs2_do_unlink+0x328/0x5fc [jffs2] jffs2_rmdir+0x110/0x1cc [jffs2] vfs_rmdir+0x180/0x268 do_rmdir+0x2cc/0x300 ret_from_syscall+0x0/0x3c INFO: Freed in 0x205b age=3054364 cpu=0 pid=0 0x2e9173 jffs2_add_fd_to_list+0x138/0x1dc [jffs2] jffs2_add_fd_to_list+0x138/0x1dc [jffs2] jffs2_garbage_collect_dirent.isra.3+0x21c/0x288 [jffs2] jffs2_garbage_collect_live+0x16bc/0x1800 [jffs2] jffs2_garbage_collect_pass+0x678/0x11d4 [jffs2] jffs2_garbage_collect_thread+0x1e8/0x3b0 [jffs2] kthread+0x1a8/0x1b0 ret_from_kernel_thread+0x5c/0x64 Call Trace: [c17ddd20] [c02452d4] kasan_report.part.0+0x298/0x72c (unreliable) [c17ddda0] [d2509680] jffs2_rmdir+0xa4/0x1cc [jffs2] [c17dddd0] [c026da04] vfs_rmdir+0x180/0x268 [c17dde00] [c026f4e4] do_rmdir+0x2cc/0x300 [c17ddf40] [c001a658] ret_from_syscall+0x0/0x3c The root cause is that we don't get "jffs2_inode_info.sem" before we scan list "jffs2_inode_info.dents" in function jffs2_rmdir. This patch add codes to get "jffs2_inode_info.sem" before we scan "jffs2_inode_info.dents" to slove the UAF problem. Signed-off-by: Zhe Li <lizhe67@huawei.com> Reviewed-by: Hou Tao <houtao1@huawei.com> Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-12-04Revert "jffs2: Fix possible null-pointer dereferences in ↵Joel Stanley
jffs2_add_frag_to_fragtree()" commit 6e78c01fde9023e0701f3af880c1fd9de6e4e8e3 upstream. This reverts commit f2538f999345405f7d2e1194c0c8efa4e11f7b3a. The patch stopped JFFS2 from being able to mount an existing filesystem with the following errors: jffs2: error: (77) jffs2_build_inode_fragtree: Add node to tree failed -22 jffs2: error: (77) jffs2_do_read_inode_internal: Failed to build final fragtree for inode #5377: error -22 Fixes: f2538f999345 ("jffs2: Fix possible null-pointer dereferences...") Cc: stable@vger.kernel.org Suggested-by: Hou Tao <houtao1@huawei.com> Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-09-26Merge branch 'work.mount3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull jffs2 fix from Al Viro: "braino fix for mount API conversion for jffs2" * 'work.mount3' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: jffs2: Fix mounting under new mount API
2019-09-26jffs2: Fix mounting under new mount APIDavid Howells
The mounting of jffs2 is broken due to the changes from the new mount API because it specifies a "source" operation, but then doesn't actually process it. But because it specified it, it doesn't return -ENOPARAM and the caller doesn't process it either and the source gets lost. Fix this by simply removing the source parameter from jffs2 and letting the VFS deal with it in the default manner. To test it, enable CONFIG_MTD_MTDRAM and allow the default size and erase block size parameters, then try and mount the /dev/mtdblock<N> file that that creates as jffs2. No need to initialise it. Fixes: ec10a24f10c8 ("vfs: Convert jffs2 to use the new mount API") Reported-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: David Howells <dhowells@redhat.com> cc: David Woodhouse <dwmw2@infradead.org> cc: Richard Weinberger <richard@nod.at> cc: linux-mtd@lists.infradead.org Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2019-09-21Merge tag 'upstream-5.4-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs Pull UBI, UBIFS and JFFS2 updates from Richard Weinberger: "UBI: - Be less stupid when placing a fastmap anchor - Try harder to get an empty PEB in case of contention - Make ubiblock to warn if image is not a multiple of 512 UBIFS: - Various fixes in error paths JFFS2: - Various fixes in error paths" * tag 'upstream-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs: jffs2: Fix memory leak in jffs2_scan_eraseblock() error path jffs2: Remove jffs2_gc_fetch_page and jffs2_gc_release_page jffs2: Fix possible null-pointer dereferences in jffs2_add_frag_to_fragtree() ubi: block: Warn if volume size is not multiple of 512 ubifs: Fix memory leak bug in alloc_ubifs_info() error path ubifs: Fix memory leak in __ubifs_node_verify_hmac error path ubifs: Fix memory leak in read_znode() error path ubi: ubi_wl_get_peb: Increase the number of attempts while getting PEB ubi: Don't do anchor move within fastmap area ubifs: Remove redundant assignment to pointer fname
2019-09-19Merge branch 'work.mount2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull misc mount API conversions from Al Viro: "Conversions to new API for shmem and friends and for mount_mtd()-using filesystems. As for the rest of the mount API conversions in -next, some of them belong in the individual trees (e.g. binderfs one should definitely go through android folks, after getting redone on top of their changes). I'm going to drop those and send the rest (trivial ones + stuff ACKed by maintainers) in a separate series - by that point they are independent from each other. Some stuff has already migrated into individual trees (NFS conversion, for example, or FUSE stuff, etc.); those presumably will go through the regular merges from corresponding trees." * 'work.mount2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: vfs: Make fs_parse() handle fs_param_is_fd-type params better vfs: Convert ramfs, shmem, tmpfs, devtmpfs, rootfs to use the new mount API shmem_parse_one(): switch to use of fs_parse() shmem_parse_options(): take handling a single option into a helper shmem_parse_options(): don't bother with mpol in separate variable shmem_parse_options(): use a separate structure to keep the results make shmem_fill_super() static make ramfs_fill_super() static devtmpfs: don't mix {ramfs,shmem}_fill_super() with mount_single() vfs: Convert squashfs to use the new mount API mtd: Kill mount_mtd() vfs: Convert jffs2 to use the new mount API vfs: Convert cramfs to use the new mount API vfs: Convert romfs to use the new mount API vfs: Add a single-or-reconfig keying to vfs_get_super()
2019-09-15jffs2: Fix memory leak in jffs2_scan_eraseblock() error pathWenwen Wang
In jffs2_scan_eraseblock(), 'sumptr' is allocated through kmalloc() if 'sumlen' is larger than 'buf_size'. However, it is not deallocated in the following execution if jffs2_fill_scan_buf() fails, leading to a memory leak bug. To fix this issue, free 'sumptr' before returning the error. Signed-off-by: Wenwen Wang <wenwen@cs.uga.edu> Signed-off-by: Richard Weinberger <richard@nod.at>
2019-09-15jffs2: Remove jffs2_gc_fetch_page and jffs2_gc_release_pageChristoph Hellwig
Merge these two helpers into the only callers to get rid of some amazingly bad calling conventions. Suggested-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Richard Weinberger <richard@nod.at>
2019-09-15jffs2: Fix possible null-pointer dereferences in jffs2_add_frag_to_fragtree()Jia-Ju Bai
In jffs2_add_frag_to_fragtree(), there is an if statement on line 223 to check whether "this" is NULL: if (this) When "this" is NULL, it is used at several places, such as on line 249: if (this->node) and on line 260: if (newfrag->ofs > this->ofs) Thus possible null-pointer dereferences may occur. To fix these bugs, -EINVAL is returned when "this" is NULL. These bugs are found by a static analysis tool STCheck written by us. Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2019-09-05vfs: Convert jffs2 to use the new mount APIDavid Howells
Convert the jffs2 filesystem to the new internal mount API as the old one will be obsoleted and removed. This allows greater flexibility in communication of mount parameters between userspace, the VFS and the filesystem. See Documentation/filesystems/mount_api.txt for more information. Signed-off-by: David Howells <dhowells@redhat.com> cc: David Woodhouse <dwmw2@infradead.org> cc: linux-mtd@lists.infradead.org Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2019-08-30fs: Fill in max and min timestamps in superblockDeepa Dinamani
Fill in the appropriate limits to avoid inconsistencies in the vfs cached inode times when timestamps are outside the permitted range. Even though some filesystems are read-only, fill in the timestamps to reflect the on-disk representation. Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Acked-By: Tigran Aivazian <aivazian.tigran@gmail.com> Acked-by: Jeff Layton <jlayton@kernel.org> Cc: aivazian.tigran@gmail.com Cc: al@alarsen.net Cc: coda@cs.cmu.edu Cc: darrick.wong@oracle.com Cc: dushistov@mail.ru Cc: dwmw2@infradead.org Cc: hch@infradead.org Cc: jack@suse.com Cc: jaharkes@cs.cmu.edu Cc: luisbg@kernel.org Cc: nico@fluxnic.net Cc: phillip@squashfs.org.uk Cc: richard@nod.at Cc: salah.triki@gmail.com Cc: shaggy@kernel.org Cc: linux-xfs@vger.kernel.org Cc: codalist@coda.cs.cmu.edu Cc: linux-ext4@vger.kernel.org Cc: linux-mtd@lists.infradead.org Cc: jfs-discussion@lists.sourceforge.net Cc: reiserfs-devel@vger.kernel.org
2019-07-12jffs2: pass the correct prototype to read_cache_pageChristoph Hellwig
Fix the callback jffs2 passes to read_cache_page to actually have the proper type expected. Casting around function pointers can easily hide typing bugs, and defeats control flow protection. Link: http://lkml.kernel.org/r/20190520055731.24538-4-hch@lst.de Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Kees Cook <keescook@chromium.org> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Sami Tolvanen <samitolvanen@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-07Merge tag 'Wimplicit-fallthrough-5.2-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux Pull Wimplicit-fallthrough updates from Gustavo A. R. Silva: "Mark switch cases where we are expecting to fall through. This is part of the ongoing efforts to enable -Wimplicit-fallthrough. Most of them have been baking in linux-next for a whole development cycle. And with Stephen Rothwell's help, we've had linux-next nag-emails going out for newly introduced code that triggers -Wimplicit-fallthrough to avoid gaining more of these cases while we work to remove the ones that are already present. We are getting close to completing this work. Currently, there are only 32 of 2311 of these cases left to be addressed in linux-next. I'm auditing every case; I take a look into the code and analyze it in order to determine if I'm dealing with an actual bug or a false positive, as explained here: https://lore.kernel.org/lkml/c2fad584-1705-a5f2-d63c-824e9b96cf50@embeddedor.com/ While working on this, I've found and fixed the several missing break/return bugs, some of them introduced more than 5 years ago. Once this work is finished, we'll be able to universally enable "-Wimplicit-fallthrough" to avoid any of these kinds of bugs from entering the kernel again" * tag 'Wimplicit-fallthrough-5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux: (27 commits) memstick: mark expected switch fall-throughs drm/nouveau/nvkm: mark expected switch fall-throughs NFC: st21nfca: Fix fall-through warnings NFC: pn533: mark expected switch fall-throughs block: Mark expected switch fall-throughs ASN.1: mark expected switch fall-through lib/cmdline.c: mark expected switch fall-throughs lib: zstd: Mark expected switch fall-throughs scsi: sym53c8xx_2: sym_nvram: Mark expected switch fall-through scsi: sym53c8xx_2: sym_hipd: mark expected switch fall-throughs scsi: ppa: mark expected switch fall-through scsi: osst: mark expected switch fall-throughs scsi: lpfc: lpfc_scsi: Mark expected switch fall-throughs scsi: lpfc: lpfc_nvme: Mark expected switch fall-through scsi: lpfc: lpfc_nportdisc: Mark expected switch fall-through scsi: lpfc: lpfc_hbadisc: Mark expected switch fall-throughs scsi: lpfc: lpfc_els: Mark expected switch fall-throughs scsi: lpfc: lpfc_ct: Mark expected switch fall-throughs scsi: imm: mark expected switch fall-throughs scsi: csiostor: csio_wr: mark expected switch fall-through ...
2019-05-01jffs2: switch to ->free_inode()Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2019-04-08fs: mark expected switch fall-throughsGustavo A. R. Silva
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. This patch fixes the following warnings: fs/affs/affs.h:124:38: warning: this statement may fall through [-Wimplicit-fallthrough=] fs/configfs/dir.c:1692:11: warning: this statement may fall through [-Wimplicit-fallthrough=] fs/configfs/dir.c:1694:7: warning: this statement may fall through [-Wimplicit-fallthrough=] fs/ceph/file.c:249:3: warning: this statement may fall through [-Wimplicit-fallthrough=] fs/ext4/hash.c:233:15: warning: this statement may fall through [-Wimplicit-fallthrough=] fs/ext4/hash.c:246:15: warning: this statement may fall through [-Wimplicit-fallthrough=] fs/ext2/inode.c:1237:7: warning: this statement may fall through [-Wimplicit-fallthrough=] fs/ext2/inode.c:1244:7: warning: this statement may fall through [-Wimplicit-fallthrough=] fs/ext4/indirect.c:1182:6: warning: this statement may fall through [-Wimplicit-fallthrough=] fs/ext4/indirect.c:1188:6: warning: this statement may fall through [-Wimplicit-fallthrough=] fs/ext4/indirect.c:1432:6: warning: this statement may fall through [-Wimplicit-fallthrough=] fs/ext4/indirect.c:1440:6: warning: this statement may fall through [-Wimplicit-fallthrough=] fs/f2fs/node.c:618:8: warning: this statement may fall through [-Wimplicit-fallthrough=] fs/f2fs/node.c:620:8: warning: this statement may fall through [-Wimplicit-fallthrough=] fs/btrfs/ref-verify.c:522:15: warning: this statement may fall through [-Wimplicit-fallthrough=] fs/gfs2/bmap.c:711:7: warning: this statement may fall through [-Wimplicit-fallthrough=] fs/gfs2/bmap.c:722:7: warning: this statement may fall through [-Wimplicit-fallthrough=] fs/jffs2/fs.c:339:6: warning: this statement may fall through [-Wimplicit-fallthrough=] fs/nfsd/nfs4proc.c:429:12: warning: this statement may fall through [-Wimplicit-fallthrough=] fs/ufs/util.h:62:6: warning: this statement may fall through [-Wimplicit-fallthrough=] fs/ufs/util.h:43:6: warning: this statement may fall through [-Wimplicit-fallthrough=] fs/fcntl.c:770:7: warning: this statement may fall through [-Wimplicit-fallthrough=] fs/seq_file.c:319:10: warning: this statement may fall through [-Wimplicit-fallthrough=] fs/libfs.c:148:11: warning: this statement may fall through [-Wimplicit-fallthrough=] fs/libfs.c:150:7: warning: this statement may fall through [-Wimplicit-fallthrough=] fs/signalfd.c:178:7: warning: this statement may fall through [-Wimplicit-fallthrough=] fs/locks.c:1473:16: warning: this statement may fall through [-Wimplicit-fallthrough=] Warning level 3 was used: -Wimplicit-fallthrough=3 This patch is part of the ongoing efforts to enabling -Wimplicit-fallthrough. Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
2019-04-01jffs2: fix use-after-free on symlink traversalAl Viro
free the symlink body after the same RCU delay we have for freeing the struct inode itself, so that traversal during RCU pathwalk wouldn't step into freed memory. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-12-02jffs2: Fix use of uninitialized delayed_work, lockdep breakageDaniel Santos
jffs2_sync_fs makes the assumption that if CONFIG_JFFS2_FS_WRITEBUFFER is defined then a write buffer is available and has been initialized. However, this does is not the case when the mtd device has no out-of-band buffer: int jffs2_nand_flash_setup(struct jffs2_sb_info *c) { if (!c->mtd->oobsize) return 0; ... The resulting call to cancel_delayed_work_sync passing a uninitialized (but zeroed) delayed_work struct forces lockdep to become disabled. [ 90.050639] overlayfs: upper fs does not support tmpfile. [ 90.652264] INFO: trying to register non-static key. [ 90.662171] the code is fine but needs lockdep annotation. [ 90.673090] turning off the locking correctness validator. [ 90.684021] CPU: 0 PID: 1762 Comm: mount_root Not tainted 4.14.63 #0 [ 90.696672] Stack : 00000000 00000000 80d8f6a2 00000038 805f0000 80444600 8fe364f4 805dfbe7 [ 90.713349] 80563a30 000006e2 8068370c 00000001 00000000 00000001 8e2fdc48 ffffffff [ 90.730020] 00000000 00000000 80d90000 00000000 00000106 00000000 6465746e 312e3420 [ 90.746690] 6b636f6c 03bf0000 f8000000 20676e69 00000000 80000000 00000000 8e2c2a90 [ 90.763362] 80d90000 00000001 00000000 8e2c2a90 00000003 80260dc0 08052098 80680000 [ 90.780033] ... [ 90.784902] Call Trace: [ 90.789793] [<8000f0d8>] show_stack+0xb8/0x148 [ 90.798659] [<8005a000>] register_lock_class+0x270/0x55c [ 90.809247] [<8005cb64>] __lock_acquire+0x13c/0xf7c [ 90.818964] [<8005e314>] lock_acquire+0x194/0x1dc [ 90.828345] [<8003f27c>] flush_work+0x200/0x24c [ 90.837374] [<80041dfc>] __cancel_work_timer+0x158/0x210 [ 90.847958] [<801a8770>] jffs2_sync_fs+0x20/0x54 [ 90.857173] [<80125cf4>] iterate_supers+0xf4/0x120 [ 90.866729] [<80158fc4>] sys_sync+0x44/0x9c [ 90.875067] [<80014424>] syscall_common+0x34/0x58 Signed-off-by: Daniel Santos <daniel.santos@pobox.com> Reviewed-by: Hou Tao <houtao1@huawei.com> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-10-24Merge branch 'siginfo-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace Pull siginfo updates from Eric Biederman: "I have been slowly sorting out siginfo and this is the culmination of that work. The primary result is in several ways the signal infrastructure has been made less error prone. The code has been updated so that manually specifying SEND_SIG_FORCED is never necessary. The conversion to the new siginfo sending functions is now complete, which makes it difficult to send a signal without filling in the proper siginfo fields. At the tail end of the patchset comes the optimization of decreasing the size of struct siginfo in the kernel from 128 bytes to about 48 bytes on 64bit. The fundamental observation that enables this is by definition none of the known ways to use struct siginfo uses the extra bytes. This comes at the cost of a small user space observable difference. For the rare case of siginfo being injected into the kernel only what can be copied into kernel_siginfo is delivered to the destination, the rest of the bytes are set to 0. For cases where the signal and the si_code are known this is safe, because we know those bytes are not used. For cases where the signal and si_code combination is unknown the bits that won't fit into struct kernel_siginfo are tested to verify they are zero, and the send fails if they are not. I made an extensive search through userspace code and I could not find anything that would break because of the above change. If it turns out I did break something it will take just the revert of a single change to restore kernel_siginfo to the same size as userspace siginfo. Testing did reveal dependencies on preferring the signo passed to sigqueueinfo over si->signo, so bit the bullet and added the complexity necessary to handle that case. Testing also revealed bad things can happen if a negative signal number is passed into the system calls. Something no sane application will do but something a malicious program or a fuzzer might do. So I have fixed the code that performs the bounds checks to ensure negative signal numbers are handled" * 'siginfo-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (80 commits) signal: Guard against negative signal numbers in copy_siginfo_from_user32 signal: Guard against negative signal numbers in copy_siginfo_from_user signal: In sigqueueinfo prefer sig not si_signo signal: Use a smaller struct siginfo in the kernel signal: Distinguish between kernel_siginfo and siginfo signal: Introduce copy_siginfo_from_user and use it's return value signal: Remove the need for __ARCH_SI_PREABLE_SIZE and SI_PAD_SIZE signal: Fail sigqueueinfo if si_signo != sig signal/sparc: Move EMT_TAGOVF into the generic siginfo.h signal/unicore32: Use force_sig_fault where appropriate signal/unicore32: Generate siginfo in ucs32_notify_die signal/unicore32: Use send_sig_fault where appropriate signal/arc: Use force_sig_fault where appropriate signal/arc: Push siginfo generation into unhandled_exception signal/ia64: Use force_sig_fault where appropriate signal/ia64: Use the force_sig(SIGSEGV,...) in ia64_rt_sigreturn signal/ia64: Use the generic force_sigsegv in setup_frame signal/arm/kvm: Use send_sig_mceerr signal/arm: Use send_sig_fault where appropriate signal/arm: Use force_sig_fault where appropriate ...
2018-10-16jffs2: free jffs2_sb_info through jffs2_kill_sb()Hou Tao
When an invalid mount option is passed to jffs2, jffs2_parse_options() will fail and jffs2_sb_info will be freed, but then jffs2_sb_info will be used (use-after-free) and freeed (double-free) in jffs2_kill_sb(). Fix it by removing the buggy invocation of kfree() when getting invalid mount options. Fixes: 92abc475d8de ("jffs2: implement mount option parsing and compression overriding") Cc: stable@kernel.org Signed-off-by: Hou Tao <houtao1@huawei.com> Reviewed-by: Richard Weinberger <richard@nod.at> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-09-11signal: Remove the siginfo paramater from kernel_dqueue_signalEric W. Biederman
None of the callers use the it so remove it. Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-07-18jffs2: use unsigned 32-bit timstamps consistentlyArnd Bergmann
Most users of jffs2 are 32-bit systems that traditionally only support timestamps using a 32-bit signed time_t, in the range from years 1902 to 2038. On 64-bit systems, jffs2 however interpreted the same timestamps as unsigned values, reading back negative times (before 1970) as times between 2038 and 2106. Now that Linux supports 64-bit inode timestamps even on 32-bit systems, let's use the second interpretation everywhere to allow jffs2 to be used on 32-bit systems beyond 2038 without a fundamental change to the inode format. This has a slight risk of regressions, when existing files with timestamps before 1970 are present in file system images and are now interpreted as future time stamps. I considered moving the wraparound point a bit, e.g. to 1960, in order to deal with timestamps that ended up on Dec 31, 1969 due to incorrect timezone handling. However, this would complicate the implementation unnecessarily, so I went with the simplest possible method of extending the timestamps. Writing files with timestamps before 1970 or after 2106 now results in those times being clamped in the file system. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-07-18jffs2: use 64-bit intermediate timestampsArnd Bergmann
The VFS now uses timespec64 timestamps consistently, but jffs2 still converts them to 32-bit numbers on the storage medium. As the helper functions for the conversion (get_seconds() and timespec_to_timespec64()) are now deprecated, let's change them over to the more modern replacements. This keeps the traditional interpretation of those values, where the on-disk 32-bit numbers are taken to be negative numbers, i.e. dates before 1970, on 32-bit machines, but future numbers past 2038 on 64-bit machines. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-06-15Merge tag 'vfs-timespec64' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/playground Pull inode timestamps conversion to timespec64 from Arnd Bergmann: "This is a late set of changes from Deepa Dinamani doing an automated treewide conversion of the inode and iattr structures from 'timespec' to 'timespec64', to push the conversion from the VFS layer into the individual file systems. As Deepa writes: 'The series aims to switch vfs timestamps to use struct timespec64. Currently vfs uses struct timespec, which is not y2038 safe. The series involves the following: 1. Add vfs helper functions for supporting struct timepec64 timestamps. 2. Cast prints of vfs timestamps to avoid warnings after the switch. 3. Simplify code using vfs timestamps so that the actual replacement becomes easy. 4. Convert vfs timestamps to use struct timespec64 using a script. This is a flag day patch. Next steps: 1. Convert APIs that can handle timespec64, instead of converting timestamps at the boundaries. 2. Update internal data structures to avoid timestamp conversions' Thomas Gleixner adds: 'I think there is no point to drag that out for the next merge window. The whole thing needs to be done in one go for the core changes which means that you're going to play that catchup game forever. Let's get over with it towards the end of the merge window'" * tag 'vfs-timespec64' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/playground: pstore: Remove bogus format string definition vfs: change inode times to use struct timespec64 pstore: Convert internal records to timespec64 udf: Simplify calls to udf_disk_stamp_to_time fs: nfs: get rid of memcpys for inode times ceph: make inode time prints to be long long lustre: Use long long type to print inode time fs: add timespec64_truncate()
2018-06-14Merge branch 'vfs_timespec64' of https://github.com/deepa-hub/vfs into ↵Arnd Bergmann
vfs-timespec64 Pull the timespec64 conversion from Deepa Dinamani: "The series aims to switch vfs timestamps to use struct timespec64. Currently vfs uses struct timespec, which is not y2038 safe. The flag patch applies cleanly. I've not seen the timestamps update logic change often. The series applies cleanly on 4.17-rc6 and linux-next tip (top commit: next-20180517). I'm not sure how to merge this kind of a series with a flag patch. We are targeting 4.18 for this. Let me know if you have other suggestions. The series involves the following: 1. Add vfs helper functions for supporting struct timepec64 timestamps. 2. Cast prints of vfs timestamps to avoid warnings after the switch. 3. Simplify code using vfs timestamps so that the actual replacement becomes easy. 4. Convert vfs timestamps to use struct timespec64 using a script. This is a flag day patch. I've tried to keep the conversions with the script simple, to aid in the reviews. I've kept all the internal filesystem data structures and function signatures the same. Next steps: 1. Convert APIs that can handle timespec64, instead of converting timestamps at the boundaries. 2. Update internal data structures to avoid timestamp conversions." I've pulled it into a branch based on top of the NFS changes that are now in mainline, so I could resolve the non-obvious conflict between the two while merging. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-06-12treewide: kmalloc() -> kmalloc_array()Kees Cook
The kmalloc() function has a 2-factor argument form, kmalloc_array(). This patch replaces cases of: kmalloc(a * b, gfp) with: kmalloc_array(a * b, gfp) as well as handling cases of: kmalloc(a * b * c, gfp) with: kmalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kmalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kmalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The tools/ directory was manually excluded, since it has its own implementation of kmalloc(). The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kmalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kmalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kmalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(char) * COUNT + COUNT , ...) | kmalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kmalloc + kmalloc_array ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kmalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kmalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kmalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kmalloc(C1 * C2 * C3, ...) | kmalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kmalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kmalloc(sizeof(THING) * C2, ...) | kmalloc(sizeof(TYPE) * C2, ...) | kmalloc(C1 * C2 * C3, ...) | kmalloc(C1 * C2, ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - (E1) * E2 + E1, E2 , ...) | - kmalloc + kmalloc_array ( - (E1) * (E2) + E1, E2 , ...) | - kmalloc + kmalloc_array ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-12Convert jffs2 acl to struct_sizeMatthew Wilcox
Need to tell the compiler that the acl entries follow the acl header. Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com> Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-05vfs: change inode times to use struct timespec64Deepa Dinamani
struct timespec is not y2038 safe. Transition vfs to use y2038 safe struct timespec64 instead. The change was made with the help of the following cocinelle script. This catches about 80% of the changes. All the header file and logic changes are included in the first 5 rules. The rest are trivial substitutions. I avoid changing any of the function signatures or any other filesystem specific data structures to keep the patch simple for review. The script can be a little shorter by combining different cases. But, this version was sufficient for my usecase. virtual patch @ depends on patch @ identifier now; @@ - struct timespec + struct timespec64 current_time ( ... ) { - struct timespec now = current_kernel_time(); + struct timespec64 now = current_kernel_time64(); ... - return timespec_trunc( + return timespec64_trunc( ... ); } @ depends on patch @ identifier xtime; @@ struct \( iattr \| inode \| kstat \) { ... - struct timespec xtime; + struct timespec64 xtime; ... } @ depends on patch @ identifier t; @@ struct inode_operations { ... int (*update_time) (..., - struct timespec t, + struct timespec64 t, ...); ... } @ depends on patch @ identifier t; identifier fn_update_time =~ "update_time$"; @@ fn_update_time (..., - struct timespec *t, + struct timespec64 *t, ...) { ... } @ depends on patch @ identifier t; @@ lease_get_mtime( ... , - struct timespec *t + struct timespec64 *t ) { ... } @te depends on patch forall@ identifier ts; local idexpression struct inode *inode_node; identifier i_xtime =~ "^i_[acm]time$"; identifier ia_xtime =~ "^ia_[acm]time$"; identifier fn_update_time =~ "update_time$"; identifier fn; expression e, E3; local idexpression struct inode *node1; local idexpression struct inode *node2; local idexpression struct iattr *attr1; local idexpression struct iattr *attr2; local idexpression struct iattr attr; identifier i_xtime1 =~ "^i_[acm]time$"; identifier i_xtime2 =~ "^i_[acm]time$"; identifier ia_xtime1 =~ "^ia_[acm]time$"; identifier ia_xtime2 =~ "^ia_[acm]time$"; @@ ( ( - struct timespec ts; + struct timespec64 ts; | - struct timespec ts = current_time(inode_node); + struct timespec64 ts = current_time(inode_node); ) <+... when != ts ( - timespec_equal(&inode_node->i_xtime, &ts) + timespec64_equal(&inode_node->i_xtime, &ts) | - timespec_equal(&ts, &inode_node->i_xtime) + timespec64_equal(&ts, &inode_node->i_xtime) | - timespec_compare(&inode_node->i_xtime, &ts) + timespec64_compare(&inode_node->i_xtime, &ts) | - timespec_compare(&ts, &inode_node->i_xtime) + timespec64_compare(&ts, &inode_node->i_xtime) | ts = current_time(e) | fn_update_time(..., &ts,...) | inode_node->i_xtime = ts | node1->i_xtime = ts | ts = inode_node->i_xtime | <+... attr1->ia_xtime ...+> = ts | ts = attr1->ia_xtime | ts.tv_sec | ts.tv_nsec | btrfs_set_stack_timespec_sec(..., ts.tv_sec) | btrfs_set_stack_timespec_nsec(..., ts.tv_nsec) | - ts = timespec64_to_timespec( + ts = ... -) | - ts = ktime_to_timespec( + ts = ktime_to_timespec64( ...) | - ts = E3 + ts = timespec_to_timespec64(E3) | - ktime_get_real_ts(&ts) + ktime_get_real_ts64(&ts) | fn(..., - ts + timespec64_to_timespec(ts) ,...) ) ...+> ( <... when != ts - return ts; + return timespec64_to_timespec(ts); ...> ) | - timespec_equal(&node1->i_xtime1, &node2->i_xtime2) + timespec64_equal(&node1->i_xtime2, &node2->i_xtime2) | - timespec_equal(&node1->i_xtime1, &attr2->ia_xtime2) + timespec64_equal(&node1->i_xtime2, &attr2->ia_xtime2) | - timespec_compare(&node1->i_xtime1, &node2->i_xtime2) + timespec64_compare(&node1->i_xtime1, &node2->i_xtime2) | node1->i_xtime1 = - timespec_trunc(attr1->ia_xtime1, + timespec64_trunc(attr1->ia_xtime1, ...) | - attr1->ia_xtime1 = timespec_trunc(attr2->ia_xtime2, + attr1->ia_xtime1 = timespec64_trunc(attr2->ia_xtime2, ...) | - ktime_get_real_ts(&attr1->ia_xtime1) + ktime_get_real_ts64(&attr1->ia_xtime1) | - ktime_get_real_ts(&attr.ia_xtime1) + ktime_get_real_ts64(&attr.ia_xtime1) ) @ depends on patch @ struct inode *node; struct iattr *attr; identifier fn; identifier i_xtime =~ "^i_[acm]time$"; identifier ia_xtime =~ "^ia_[acm]time$"; expression e; @@ ( - fn(node->i_xtime); + fn(timespec64_to_timespec(node->i_xtime)); | fn(..., - node->i_xtime); + timespec64_to_timespec(node->i_xtime)); | - e = fn(attr->ia_xtime); + e = fn(timespec64_to_timespec(attr->ia_xtime)); ) @ depends on patch forall @ struct inode *node; struct iattr *attr; identifier i_xtime =~ "^i_[acm]time$"; identifier ia_xtime =~ "^ia_[acm]time$"; identifier fn; @@ { + struct timespec ts; <+... ( + ts = timespec64_to_timespec(node->i_xtime); fn (..., - &node->i_xtime, + &ts, ...); | + ts = timespec64_to_timespec(attr->ia_xtime); fn (..., - &attr->ia_xtime, + &ts, ...); ) ...+> } @ depends on patch forall @ struct inode *node; struct iattr *attr; struct kstat *stat; identifier ia_xtime =~ "^ia_[acm]time$"; identifier i_xtime =~ "^i_[acm]time$"; identifier xtime =~ "^[acm]time$"; identifier fn, ret; @@ { + struct timespec ts; <+... ( + ts = timespec64_to_timespec(node->i_xtime); ret = fn (..., - &node->i_xtime, + &ts, ...); | + ts = timespec64_to_timespec(node->i_xtime); ret = fn (..., - &node->i_xtime); + &ts); | + ts = timespec64_to_timespec(attr->ia_xtime); ret = fn (..., - &attr->ia_xtime, + &ts, ...); | + ts = timespec64_to_timespec(attr->ia_xtime); ret = fn (..., - &attr->ia_xtime); + &ts); | + ts = timespec64_to_timespec(stat->xtime); ret = fn (..., - &stat->xtime); + &ts); ) ...+> } @ depends on patch @ struct inode *node; struct inode *node2; identifier i_xtime1 =~ "^i_[acm]time$"; identifier i_xtime2 =~ "^i_[acm]time$"; identifier i_xtime3 =~ "^i_[acm]time$"; struct iattr *attrp; struct iattr *attrp2; struct iattr attr ; identifier ia_xtime1 =~ "^ia_[acm]time$"; identifier ia_xtime2 =~ "^ia_[acm]time$"; struct kstat *stat; struct kstat stat1; struct timespec64 ts; identifier xtime =~ "^[acmb]time$"; expression e; @@ ( ( node->i_xtime2 \| attrp->ia_xtime2 \| attr.ia_xtime2 \) = node->i_xtime1 ; | node->i_xtime2 = \( node2->i_xtime1 \| timespec64_trunc(...) \); | node->i_xtime2 = node->i_xtime1 = node->i_xtime3 = \(ts \| current_time(...) \); | node->i_xtime1 = node->i_xtime3 = \(ts \| current_time(...) \); | stat->xtime = node2->i_xtime1; | stat1.xtime = node2->i_xtime1; | ( node->i_xtime2 \| attrp->ia_xtime2 \) = attrp->ia_xtime1 ; | ( attrp->ia_xtime1 \| attr.ia_xtime1 \) = attrp2->ia_xtime2; | - e = node->i_xtime1; + e = timespec64_to_timespec( node->i_xtime1 ); | - e = attrp->ia_xtime1; + e = timespec64_to_timespec( attrp->ia_xtime1 ); | node->i_xtime1 = current_time(...); | node->i_xtime2 = node->i_xtime1 = node->i_xtime3 = - e; + timespec_to_timespec64(e); | node->i_xtime1 = node->i_xtime3 = - e; + timespec_to_timespec64(e); | - node->i_xtime1 = e; + node->i_xtime1 = timespec_to_timespec64(e); ) Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com> Cc: <anton@tuxera.com> Cc: <balbi@kernel.org> Cc: <bfields@fieldses.org> Cc: <darrick.wong@oracle.com> Cc: <dhowells@redhat.com> Cc: <dsterba@suse.com> Cc: <dwmw2@infradead.org> Cc: <hch@lst.de> Cc: <hirofumi@mail.parknet.co.jp> Cc: <hubcap@omnibond.com> Cc: <jack@suse.com> Cc: <jaegeuk@kernel.org> Cc: <jaharkes@cs.cmu.edu> Cc: <jslaby@suse.com> Cc: <keescook@chromium.org> Cc: <mark@fasheh.com> Cc: <miklos@szeredi.hu> Cc: <nico@linaro.org> Cc: <reiserfs-devel@vger.kernel.org> Cc: <richard@nod.at> Cc: <sage@redhat.com> Cc: <sfrench@samba.org> Cc: <swhiteho@redhat.com> Cc: <tj@kernel.org> Cc: <trond.myklebust@primarydata.com> Cc: <tytso@mit.edu> Cc: <viro@zeniv.linux.org.uk>
2018-05-11do d_instantiate/unlock_new_inode combinations safelyAl Viro
For anything NFS-exported we do _not_ want to unlock new inode before it has grown an alias; original set of fixes got the ordering right, but missed the nasty complication in case of lockdep being enabled - unlock_new_inode() does lockdep_annotate_inode_mutex_key(inode) which can only be done before anyone gets a chance to touch ->i_mutex. Unfortunately, flipping the order and doing unlock_new_inode() before d_instantiate() opens a window when mkdir can race with open-by-fhandle on a guessed fhandle, leading to multiple aliases for a directory inode and all the breakage that follows from that. Correct solution: a new primitive (d_instantiate_new()) combining these two in the right order - lockdep annotate, then d_instantiate(), then the rest of unlock_new_inode(). All combinations of d_instantiate() with unlock_new_inode() should be converted to that. Cc: stable@kernel.org # 2.6.29 and later Tested-by: Mike Marshall <hubcap@omnibond.com> Reviewed-by: Andreas Dilger <adilger@dilger.ca> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-04-15jffs2_kill_sb(): deal with failed allocationsAl Viro
jffs2_fill_super() might fail to allocate jffs2_sb_info; jffs2_kill_sb() must survive that. Cc: stable@kernel.org Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-03-15mtd: Unconditionally update ->fail_addr and ->addr in part_erase()Boris Brezillon
->fail_addr and ->addr can be updated no matter the result of parent->_erase(), we just need to remove the code doing the same thing in mtd_erase_callback() to avoid adjusting those fields twice. Note that this can be done because all MTD users have been converted to not pass an erase_info->callback() and are thus only taking the ->addr_fail and ->addr fields into account after part_erase() has returned. While we're at it, get rid of the erase_info->mtd field which was only needed to let mtd_erase_callback() get the partition device back. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Reviewed-by: Richard Weinberger <richard@nod.at>
2018-03-15mtd: Stop assuming mtd_erase() is asynchronousBoris Brezillon
None of the mtd->_erase() implementations work in an asynchronous manner, so let's simplify MTD users that call mtd_erase(). All they need to do is check the value returned by mtd_erase() and assume that != 0 means failure. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Reviewed-by: Richard Weinberger <richard@nod.at>
2018-01-31Merge tag 'docs-4.16' of git://git.lwn.net/linuxLinus Torvalds
Pull documentation updates from Jonathan Corbet: "Documentation updates for 4.16. New stuff includes refcount_t documentation, errseq documentation, kernel-doc support for nested structure definitions, the removal of lots of crufty kernel-doc support for unused formats, SPDX tag documentation, the beginnings of a manual for subsystem maintainers, and lots of fixes and updates. As usual, some of the changesets reach outside of Documentation/ to effect kerneldoc comment fixes. It also adds the new LICENSES directory, of which Thomas promises I do not need to be the maintainer" * tag 'docs-4.16' of git://git.lwn.net/linux: (65 commits) linux-next: docs-rst: Fix typos in kfigure.py linux-next: DOC: HWPOISON: Fix path to debugfs in hwpoison.txt Documentation: Fix misconversion of #if docs: add index entry for networking/msg_zerocopy Documentation: security/credentials.rst: explain need to sort group_list LICENSES: Add MPL-1.1 license LICENSES: Add the GPL 1.0 license LICENSES: Add Linux syscall note exception LICENSES: Add the MIT license LICENSES: Add the BSD-3-clause "Clear" license LICENSES: Add the BSD 3-clause "New" or "Revised" License LICENSES: Add the BSD 2-clause "Simplified" license LICENSES: Add the LGPL-2.1 license LICENSES: Add the LGPL 2.0 license LICENSES: Add the GPL 2.0 license Documentation: Add license-rules.rst to describe how to properly identify file licenses scripts: kernel_doc: better handle show warnings logic fs/*/Kconfig: drop links to 404-compliant http://acl.bestbits.at doc: md: Fix a file name to md-fault.c in fault-injection.txt errseq: Add to documentation tree ...
2018-01-31Merge branch 'work.misc' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull misc vfs updates from Al Viro: "All kinds of misc stuff, without any unifying topic, from various people. Neil's d_anon patch, several bugfixes, introduction of kvmalloc analogue of kmemdup_user(), extending bitfield.h to deal with fixed-endians, assorted cleanups all over the place..." * 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (28 commits) alpha: osf_sys.c: use timespec64 where appropriate alpha: osf_sys.c: fix put_tv32 regression jffs2: Fix use-after-free bug in jffs2_iget()'s error handling path dcache: delete unused d_hash_mask dcache: subtract d_hash_shift from 32 in advance fs/buffer.c: fold init_buffer() into init_page_buffers() fs: fold __inode_permission() into inode_permission() fs: add RWF_APPEND sctp: use vmemdup_user() rather than badly open-coding memdup_user() snd_ctl_elem_init_enum_names(): switch to vmemdup_user() replace_user_tlv(): switch to vmemdup_user() new primitive: vmemdup_user() memdup_user(): switch to GFP_USER eventfd: fold eventfd_ctx_get() into eventfd_ctx_fileget() eventfd: fold eventfd_ctx_read() into eventfd_read() eventfd: convert to use anon_inode_getfd() nfs4file: get rid of pointless include of btrfs.h uvc_v4l2: clean copyin/copyout up vme_user: don't use __copy_..._user() usx2y: don't bother with memdup_user() for 16-byte structure ...
2018-01-25jffs2: Fix use-after-free bug in jffs2_iget()'s error handling pathJake Daryll Obina
If jffs2_iget() fails for a newly-allocated inode, jffs2_do_clear_inode() can get called twice in the error handling path, the first call in jffs2_iget() itself and the second through iget_failed(). This can result to a use-after-free error in the second jffs2_do_clear_inode() call, such as shown by the oops below wherein the second jffs2_do_clear_inode() call was trying to free node fragments that were already freed in the first jffs2_do_clear_inode() call. [ 78.178860] jffs2: error: (1904) jffs2_do_read_inode_internal: CRC failed for read_inode of inode 24 at physical location 0x1fc00c [ 78.178914] Unable to handle kernel paging request at virtual address 6b6b6b6b6b6b6b7b [ 78.185871] pgd = ffffffc03a567000 [ 78.188794] [6b6b6b6b6b6b6b7b] *pgd=0000000000000000, *pud=0000000000000000 [ 78.194968] Internal error: Oops: 96000004 [#1] PREEMPT SMP ... [ 78.513147] PC is at rb_first_postorder+0xc/0x28 [ 78.516503] LR is at jffs2_kill_fragtree+0x28/0x90 [jffs2] [ 78.520672] pc : [<ffffff8008323d28>] lr : [<ffffff8000eb1cc8>] pstate: 60000105 [ 78.526757] sp : ffffff800cea38f0 [ 78.528753] x29: ffffff800cea38f0 x28: ffffffc01f3f8e80 [ 78.532754] x27: 0000000000000000 x26: ffffff800cea3c70 [ 78.536756] x25: 00000000dc67c8ae x24: ffffffc033d6945d [ 78.540759] x23: ffffffc036811740 x22: ffffff800891a5b8 [ 78.544760] x21: 0000000000000000 x20: 0000000000000000 [ 78.548762] x19: ffffffc037d48910 x18: ffffff800891a588 [ 78.552764] x17: 0000000000000800 x16: 0000000000000c00 [ 78.556766] x15: 0000000000000010 x14: 6f2065646f6e695f [ 78.560767] x13: 6461657220726f66 x12: 2064656c69616620 [ 78.564769] x11: 435243203a6c616e x10: 7265746e695f6564 [ 78.568771] x9 : 6f6e695f64616572 x8 : ffffffc037974038 [ 78.572774] x7 : bbbbbbbbbbbbbbbb x6 : 0000000000000008 [ 78.576775] x5 : 002f91d85bd44a2f x4 : 0000000000000000 [ 78.580777] x3 : 0000000000000000 x2 : 000000403755e000 [ 78.584779] x1 : 6b6b6b6b6b6b6b6b x0 : 6b6b6b6b6b6b6b6b ... [ 79.038551] [<ffffff8008323d28>] rb_first_postorder+0xc/0x28 [ 79.042962] [<ffffff8000eb5578>] jffs2_do_clear_inode+0x88/0x100 [jffs2] [ 79.048395] [<ffffff8000eb9ddc>] jffs2_evict_inode+0x3c/0x48 [jffs2] [ 79.053443] [<ffffff8008201ca8>] evict+0xb0/0x168 [ 79.056835] [<ffffff8008202650>] iput+0x1c0/0x200 [ 79.060228] [<ffffff800820408c>] iget_failed+0x30/0x3c [ 79.064097] [<ffffff8000eba0c0>] jffs2_iget+0x2d8/0x360 [jffs2] [ 79.068740] [<ffffff8000eb0a60>] jffs2_lookup+0xe8/0x130 [jffs2] [ 79.073434] [<ffffff80081f1a28>] lookup_slow+0x118/0x190 [ 79.077435] [<ffffff80081f4708>] walk_component+0xfc/0x28c [ 79.081610] [<ffffff80081f4dd0>] path_lookupat+0x84/0x108 [ 79.085699] [<ffffff80081f5578>] filename_lookup+0x88/0x100 [ 79.089960] [<ffffff80081f572c>] user_path_at_empty+0x58/0x6c [ 79.094396] [<ffffff80081ebe14>] vfs_statx+0xa4/0x114 [ 79.098138] [<ffffff80081ec44c>] SyS_newfstatat+0x58/0x98 [ 79.102227] [<ffffff800808354c>] __sys_trace_return+0x0/0x4 [ 79.106489] Code: d65f03c0 f9400001 b40000e1 aa0103e0 (f9400821) The jffs2_do_clear_inode() call in jffs2_iget() is unnecessary since iget_failed() will eventually call jffs2_do_clear_inode() if needed, so just remove it. Fixes: 5451f79f5f81 ("iget: stop JFFS2 from using iget() and read_inode()") Reviewed-by: Richard Weinberger <richard@nod.at> Signed-off-by: Jake Daryll Obina <jake.obina@gmail.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-01-01fs/*/Kconfig: drop links to 404-compliant http://acl.bestbits.atAdam Borowski
This link is replicated in most filesystems' config stanzas. Referring to an archived version of that site is pointless as it mostly deals with patches; user documentation is available elsewhere. Signed-off-by: Adam Borowski <kilobyte@angband.pl> CC: Alexander Viro <viro@zeniv.linux.org.uk> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Acked-by: Jan Kara <jack@suse.cz> Acked-by: Dave Kleikamp <dave.kleikamp@oracle.com> Acked-by: David Sterba <dsterba@suse.com> Acked-by: "Yan, Zheng" <zyan@redhat.com> Acked-by: Chao Yu <yuchao0@huawei.com> Acked-by: Jaegeuk Kim <jaegeuk@kernel.org> Acked-by: Steve French <smfrench@gmail.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2017-11-27Rename superblock flags (MS_xyz -> SB_xyz)Linus Torvalds
This is a pure automated search-and-replace of the internal kernel superblock flags. The s_flags are now called SB_*, with the names and the values for the moment mirroring the MS_* flags that they're equivalent to. Note how the MS_xyz flags are the ones passed to the mount system call, while the SB_xyz flags are what we then use in sb->s_flags. The script to do this was: # places to look in; re security/*: it generally should *not* be # touched (that stuff parses mount(2) arguments directly), but # there are two places where we really deal with superblock flags. FILES="drivers/mtd drivers/staging/lustre fs ipc mm \ include/linux/fs.h include/uapi/linux/bfs_fs.h \ security/apparmor/apparmorfs.c security/apparmor/include/lib.h" # the list of MS_... constants SYMS="RDONLY NOSUID NODEV NOEXEC SYNCHRONOUS REMOUNT MANDLOCK \ DIRSYNC NOATIME NODIRATIME BIND MOVE REC VERBOSE SILENT \ POSIXACL UNBINDABLE PRIVATE SLAVE SHARED RELATIME KERNMOUNT \ I_VERSION STRICTATIME LAZYTIME SUBMOUNT NOREMOTELOCK NOSEC BORN \ ACTIVE NOUSER" SED_PROG= for i in $SYMS; do SED_PROG="$SED_PROG -e s/MS_$i/SB_$i/g"; done # we want files that contain at least one of MS_..., # with fs/namespace.c and fs/pnode.c excluded. L=$(for i in $SYMS; do git grep -w -l MS_$i $FILES; done| sort|uniq|grep -v '^fs/namespace.c'|grep -v '^fs/pnode.c') for f in $L; do sed -i $f $SED_PROG; done Requested-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-09-14Merge branch 'work.mount' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull mount flag updates from Al Viro: "Another chunk of fmount preparations from dhowells; only trivial conflicts for that part. It separates MS_... bits (very grotty mount(2) ABI) from the struct super_block ->s_flags (kernel-internal, only a small subset of MS_... stuff). This does *not* convert the filesystems to new constants; only the infrastructure is done here. The next step in that series is where the conflicts would be; that's the conversion of filesystems. It's purely mechanical and it's better done after the merge, so if you could run something like list=$(for i in MS_RDONLY MS_NOSUID MS_NODEV MS_NOEXEC MS_SYNCHRONOUS MS_MANDLOCK MS_DIRSYNC MS_NOATIME MS_NODIRATIME MS_SILENT MS_POSIXACL MS_KERNMOUNT MS_I_VERSION MS_LAZYTIME; do git grep -l $i fs drivers/staging/lustre drivers/mtd ipc mm include/linux; done|sort|uniq|grep -v '^fs/namespace.c$') sed -i -e 's/\<MS_RDONLY\>/SB_RDONLY/g' \ -e 's/\<MS_NOSUID\>/SB_NOSUID/g' \ -e 's/\<MS_NODEV\>/SB_NODEV/g' \ -e 's/\<MS_NOEXEC\>/SB_NOEXEC/g' \ -e 's/\<MS_SYNCHRONOUS\>/SB_SYNCHRONOUS/g' \ -e 's/\<MS_MANDLOCK\>/SB_MANDLOCK/g' \ -e 's/\<MS_DIRSYNC\>/SB_DIRSYNC/g' \ -e 's/\<MS_NOATIME\>/SB_NOATIME/g' \ -e 's/\<MS_NODIRATIME\>/SB_NODIRATIME/g' \ -e 's/\<MS_SILENT\>/SB_SILENT/g' \ -e 's/\<MS_POSIXACL\>/SB_POSIXACL/g' \ -e 's/\<MS_KERNMOUNT\>/SB_KERNMOUNT/g' \ -e 's/\<MS_I_VERSION\>/SB_I_VERSION/g' \ -e 's/\<MS_LAZYTIME\>/SB_LAZYTIME/g' \ $list and commit it with something along the lines of 'convert filesystems away from use of MS_... constants' as commit message, it would save a quite a bit of headache next cycle" * 'work.mount' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: VFS: Differentiate mount flags (MS_*) from internal superblock flags VFS: Convert sb->s_flags & MS_RDONLY to sb_rdonly(sb) vfs: Add sb_rdonly(sb) to query the MS_RDONLY flag on s_flags
generated by cgit v1.2.3 (git 2.0.4) at 2024-05-25 21:41:24 +0000