summaryrefslogtreecommitdiff
path: root/include/acpi
AgeCommit message (Collapse)Author
2010-08-02ACPI: skip checking BM_STS if the BIOS doesn't ask for itLen Brown
commit 718be4aaf3613cf7c2d097f925abc3d3553c0605 upstream. It turns out that there is a bit in the _CST for Intel FFH C3 that tells the OS if we should be checking BM_STS or not. Linux has been unconditionally checking BM_STS. If the chip-set is configured to enable BM_STS, it can retard or completely prevent entry into deep C-states -- as illustrated by turbostat: http://userweb.kernel.org/~lenb/acpi/utils/pmtools/turbostat/ ref: Intel Processor Vendor-Specific ACPI Interface Specification table 4 "_CST FFH GAS Field Encoding" Bit 1: Set to 1 if OSPM should use Bus Master avoidance for this C-state https://bugzilla.kernel.org/show_bug.cgi?id=15886 Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-01-28ACPI: don't cond_resched if irq is disabledXiaotian Feng
commit c084ca704a3661bf77690a05bc6bd2c305d87c34 upstream. commit 8bd108d adds preemption point after each opcode parse, then a sleeping function called from invalid context bug was founded during suspend/resume stage. this was fixed in commit abe1dfa by don't cond_resched when irq_disabled. But recent commit 138d156 changes the behaviour to don't cond_resched when in_atomic. This makes the sleeping function called from invalid context bug happen again, which is reported in http://lkml.org/lkml/2009/12/1/371. This patch also fixes http://bugzilla.kernel.org/show_bug.cgi?id=14483 Reported-and-bisected-by: Larry Finger <Larry.Finger@lwfinger.net> Reported-and-bisected-by: Justin P. Mattock <justinmattock@gmail.com> Signed-off-by: Xiaotian Feng <dfeng@redhat.com> Acked-by: Alexey Starikovskiy <astarikovskiy@suse.de> Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-25ACPI: remove acpi_device_uid() and related stuffBjorn Helgaas
Nobody uses acpi_device_uid(), so this patch removes it. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-09-25ACPI: remove acpi_device.flags.hardware_idBjorn Helgaas
Every acpi_device has at least one ID (if there's no _HID or _CID, we give it a synthetic or default ID). So there's no longer a need to check whether an ID exists; we can just use it. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-09-25ACPI: remove acpi_device.flags.compatible_idsBjorn Helgaas
We now keep a single list of IDs that includes both the _HID and any _CIDs. We no longer need to keep track of whether the device has a _CID. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-09-25ACPI: maintain a single list of _HID and _CID IDsBjorn Helgaas
There's no need to treat _HID and _CID differently. Keeping them in a single list makes code that uses the IDs a little simpler because it can just traverse the list rather than checking "do we have a HID?", "do we have any CIDs?" Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Reviewed-by: Alex Chiang <achiang@hp.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-09-25ACPI: add acpi_bus_get_status_handle()Bjorn Helgaas
Add acpi_bus_get_status_handle() so we can get the status of a namespace object before building a struct acpi_device. This removes a use of "device->flags.dynamic_status", a cached indicator of whether _STA exists. It seems simpler and more reliable to just evaluate _STA and catch AE_NOT_FOUND errors. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-09-25ACPI: identify device tree root by null parent pointer, not ACPI_BUS_TYPEBjorn Helgaas
We can identify the root of the ACPI device tree by the fact that it has no parent. This is simpler than passing around ACPI_BUS_TYPE_SYSTEM and will help remove special treatment of the device tree root. Currently, we add the root by hand with ACPI_BUS_TYPE_SYSTEM. If we traverse the tree treating the root as just another device and use acpi_get_type(), the root shows up as ACPI_TYPE_DEVICE. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-09-25ACPI: save device_type in acpi_deviceBjorn Helgaas
Most uses of the ACPI bus device_type (ACPI_BUS_TYPE_DEVICE, ACPI_BUS_TYPE_POWER, etc) are during device initialization, but we do need it later for notify handler installation, since that is different for fixed hardware devices vs. namespace devices. This patch saves the device_type in the acpi_device structure, so we can check that rather than comparing against the _HID string. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-09-24Merge branch 'drm-intel-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel * 'drm-intel-next' of git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel: (57 commits) drm/i915: Handle ERESTARTSYS during page fault drm/i915: Warn before mmaping a purgeable buffer. drm/i915: Track purged state. drm/i915: Remove eviction debug spam drm/i915: Immediately discard any backing storage for uneeded objects drm/i915: Do not mis-classify clean objects as purgeable drm/i915: Whitespace correction for madv drm/i915: BUG_ON page refleak during unbind drm/i915: Search harder for a reusable object drm/i915: Clean up evict from list. drm/i915: Add tracepoints drm/i915: framebuffer compression for GM45+ drm/i915: split display functions by chip type drm/i915: Skip the sanity checks if the current relocation is valid drm/i915: Check that the relocation points to within the target drm/i915: correct FBC update when pipe base update occurs drm/i915: blacklist Acer AspireOne lid status ACPI: make ACPI button funcs no-ops if not built in drm/i915: prevent FIFO calculation overflows on 32 bits with high dotclocks drm/i915: intel_display.c handle latency variable efficiently ... Fix up trivial conflicts in drivers/gpu/drm/i915/{i915_dma.c|i915_drv.h}
2009-09-23Merge branch 'release' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6 * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: (119 commits) ACPI: don't pass handle for fixed hardware notifications ACPI: remove null pointer checks in deferred execution path ACPI: simplify deferred execution path acerhdf: additional BIOS versions acerhdf: convert to dev_pm_ops acerhdf: fix fan control for AOA150 model thermal: add missing Kconfig dependency acpi: switch /proc/acpi/{debug_layer,debug_level} to seq_file hp-wmi: fix rfkill memory leak on unload ACPI: remove unnecessary #ifdef CONFIG_DMI ACPI: linux/acpi.h should not include linux/dmi.h hwmon driver for ACPI 4.0 power meters topstar-laptop: add new driver for hotkeys support on Topstar N01 thinkpad_acpi: fix rfkill memory leak on unload thinkpad-acpi: report brightness events when required thinkpad-acpi: don't poll by default any of the reserved hotkeys thinkpad-acpi: Fix procfs hotkey reset command thinkpad-acpi: deprecate hotkey_bios_mask thinkpad-acpi: hotkey poll fixes thinkpad-acpi: be more strict when detecting a ThinkPad ...
2009-09-21trivial: fix typo "to to" in multiple filesAnand Gadiyar
Signed-off-by: Anand Gadiyar <gadiyar@ti.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-09-20includecheck fix: include/acpi, acpi_bus.hJaswinder Singh Rajput
fix the following 'make includecheck' warning: include/acpi/acpi_bus.h: linux/device.h is included more than once. Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com> Cc: Sam Ravnborg <sam@ravnborg.org> LKML-Reference: <1247068058.4382.96.camel@ht.satnam> Acked-by: Len Brown <len.brown@intel.com>
2009-09-19Merge branch 'preempt' into releaseLen Brown
2009-09-19Merge branch 'bugzilla-13620' into releaseLen Brown
2009-09-19Merge branch 'bjorn-start-stop-2.6.32' into releaseLen Brown
2009-09-19Merge branch 'acpica' into releaseLen Brown
2009-09-19Merge branch 'sfi-base' into releaseLen Brown
Conflicts: drivers/acpi/power.c Signed-off-by: Len Brown <len.brown@intel.com>
2009-09-17ACPI: make ACPI button funcs no-ops if not built inJesse Barnes
Yakui pointed out that we don't properly no-op the ACPI button routines if the button driver isn't built in. This will cause problems if ACPI is disabled, so provide stub functions in that case. Reported-by: ykzhao <yakui.zhao@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-09-10ACPI button: provide lid status functionsJesse Barnes
Some drivers need to know when a lid event occurs and get the current status. This can be useful for when a platform firmware clobbers some hardware state at lid time, and a driver needs to restore things when the lid is opened again. Acked-by: Matthew Garrett <mjg59@srcf.ucam.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Eric Anholt <eric@anholt.net>
2009-09-09ACPI PM: Replace wakeup.prepared with reference counterRafael J. Wysocki
The wakeup.prepared flag is used for marking devices that have the wake-up power already enabled, so that the wake-up power is not enabled twice in a row for the same device. This assumes, however, that device wake-up power will only be enabled once, while the device is being prepared for a system-wide sleep transition, and the second attempt is made by acpi_enable_wakeup_device_prep(). With the upcoming PCI wake-up rework this assumption will not hold any more for PCI bridges and the root bridge whose wake-up power may be enabled as a result of wake-up enable propagation from other devices (eg. add-on devices that are not associated with any GPEs). Thus, there may be many attempts to enable wake-up power on a PCI bridge or the root bridge during a system power state transition and it's better to replace wakeup.prepared with a reference counter. Reviewed-by: Matthew Garrett <mjg59@srcf.ucam.org> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-09-09ACPI: export acpi_pci_root and friendsAlex Chiang
We can simplify ACPI drivers if we can tell whether a handle is an ACPI PCI root or not. Reviewed-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Alex Chiang <achiang@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-09-08ACPICA: Update version to 20090903.Bob Moore
Version 20090903. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-08-29ACPICA: Don't switch task then not allowedAlexey Starikovskiy
Signed-off-by: Alexey Starikovskiy <astarikovskiy@suse.de> Signed-off-by: Len Brown <len.brown@intel.com>
2009-08-28ACPI: Move definition of PREFIX from acpi_bus.h to internal..hLen Brown
Linux/ACPI core files using internal.h all PREFIX "ACPI: ", however, not all ACPI drivers use/want it -- and they should not have to #undef PREFIX to define their own. Add GPL commment to internal.h while we are there. This does not change any actual console output, asside from a whitespace fix. Signed-off-by: Len Brown <len.brown@intel.com>
2009-08-28ACPICA: Update version to 20090730Bob Moore
Version 20090730. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-08-28ACPICA: Fix typo for HEST ACPI tableBob Moore
Problem with the name of one of the subtables. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-08-28ACPICA: Update definitions for HEST tableBob Moore
Eliminate duplicated code in disassembler. Shorten identifiers that were too long. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-08-28ACPICA: ACPI 4: Update headers for new and changed ACPI tables.Bob Moore
Add IVRS,MSCT,UEFI,WAET,WDAT. Updated several existing tables for ACPI 4.0-related changes. Added document references for all tables not defined in ACPI spec. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-08-28ACPICA: Split large ACPI table headerBob Moore
Split out the non-acpi-defined ACPI tables into the existing (but empty) actbl2.h file. Preparation for new ACPI 4.0 tables. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-08-27ACPICA: fix leak of acpi_os_validate_addressLin Ming
http://bugzilla.kernel.org/show_bug.cgi?id=13620 If the dynamic region is created and added to resource list over and over again, it has the potential to be a memory leak by growing the list every time. This patch fixes the memory leak, as below 1) add a new field "count" to struct acpi_res_list. When inserting, if the region(addr, len) is already in the resource list, we just increase "count", otherwise, the region is inserted with count=1. When deleting, the "count" is decreased, if it's decreased to 0, the region is deleted from the resource list. With "count", the region with same address and length can only be inserted to the resource list once, so prevent potential memory leak. 2) add a new function acpi_os_invalidate_address, which is called when region is deleted. Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-08-27ACPICA: Update version to 20090625Bob Moore
Update version number. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-08-27ACPICA: ACPI 4.0: Changes for existing ACPI tables.Bob Moore
FACS: new flag and new OspmFlags field. SRAT: x2APIC - add ClockDomain field to descriptor #2 Includes header and disassembler support. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-08-27ACPICA: Fix several acpi_attach_data problemsBob Moore
Handler was never invoked. Now invoked if/when host node is deleted. Data object was not automatically deleted when host node was deleted. Interface to handler had an unused parameter, removed it. ACPICA BZ 778. http://acpica.org/bugzilla/show_bug.cgi?id=778 Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-08-27ACPICA: ACPI 4.0: Interpreter support for IPMI.Lin Ming
Adds support for IPMI which is similar to SMBus and uses a bi-directional data buffer. ACPICA BZ 773. http://acpica.org/bugzilla/show_bug.cgi?id=773 Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-08-27ACPICA: Major update for acpi_get_object_info external interfaceBob Moore
Completed a major update for the acpi_get_object_info external interface. Changes include: - Support for variable, unlimited length HID, UID, and CID strings - Support Processor objects the same as Devices (HID,UID,CID,ADR,STA, etc.) - Call the _SxW power methods on behalf of a device object - Determine if a device is a PCI root bridge - Change the ACPI_BUFFER parameter to ACPI_DEVICE_INFO. These changes will require an update to all callers of this interface. See the ACPICA Programmer Reference for details. Also, update all invocations of acpi_get_object_info interface Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-08-27ACPICA: Add 64-bit support to acpi_read and acpi_writeBob Moore
Needed by drivers for new ACPi tables. Internal versions of these functions still use 32-bit max transfers, in order to minimize disruption and stack use for the standard ACPI registers (FADT-based). Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-08-27ACPICA: Remove duplicate extern declarations for public globalsBob Moore
Some were defined twice, causes a warning with gcc -Wredundant-decls. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-08-26ACPI processor: force throttling state when BIOS returns incorrect valueFrans Pop
If the BIOS reports an invalid throttling state (which seems to be fairly common after system boot), a reset is done to state T0. Because of a check in acpi_processor_get_throttling_ptc(), the reset never actually gets executed, which results in the error reoccurring on every access of for example /proc/acpi/processor/CPU0/throttling. Add a 'force' option to acpi_processor_set_throttling() to ensure the reset really takes effect. Addresses http://bugzilla.kernel.org/show_bug.cgi?id=13389 This patch, together with the next one, fixes a regression introduced in 2.6.30, listed on the regression list. They have been available for 2.5 months now in bugzilla, but have not been picked up, despite various reminders and without any reason given. Google shows that numerous people are hitting this issue. The issue is in itself relatively minor, but the bug in the code is clear. The patches have been in all my kernels and today testing has shown that throttling works correctly with the patches applied when the system overheats (http://bugzilla.kernel.org/show_bug.cgi?id=13918#c14). Signed-off-by: Frans Pop <elendil@planet.nl> Acked-by: Zhang Rui <rui.zhang@intel.com> Cc: Len Brown <lenb@kernel.org> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-07-27Revert "ACPICA: Remove obsolete acpi_os_validate_address interface"Len Brown
This reverts commit f9ca058430333c9a24c5ca926aa445125f88df18. which caused a regression: http://bugzilla.kernel.org/show_bug.cgi?id=13620 Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-06-25ACPI: remove unused acpi_device_ops .stop methodBjorn Helgaas
No drivers use the .stop method, so remove it. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Reviewed-by: Alex Chiang <achiang@hp.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-06-24Merge branch 'bjorn-notify' into releaseLen Brown
Conflicts: drivers/platform/x86/eeepc-laptop.c Signed-off-by: Len Brown <len.brown@intel.com>
2009-06-24Merge branches 'acerhdf', 'acpi-pci-bind', 'bjorn-pci-root', ↵Len Brown
'bugzilla-12904', 'bugzilla-13121', 'bugzilla-13396', 'bugzilla-13533', 'bugzilla-13612', 'c3_lock', 'hid-cleanups', 'misc-2.6.31', 'pdc-leak-fix', 'pnpacpi', 'power_nocheck', 'thinkpad_acpi', 'video' and 'wmi' into release
2009-06-23ACPI: Add the reference count to avoid unloading ACPI video bus twiceZhao Yakui
Sometimes both acpi video and i915 driver are compiled as modules. And there exists the strict dependency between the two drivers. The acpi video bus will be unloaded in course of unloading the i915 driver. If we unload the acpi video driver, then the kernel oops will be triggered. Add the reference count to avoid unloading the ACPI video bus twice. The reference count should be checked before unregistering the acpi video bus. If the reference count is already zero, it won't unregister it again. And after the acpi video bus is already unregistered, the reference count will be set to zero. http://bugzilla.kernel.org/show_bug.cgi?id=13396 Signed-off-by: Zhao Yakui <yakui.zhao@intel.com> Acked-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-06-20ACPI: pdc init related memory leak with physical CPU hotplugPallipadi, Venkatesh
arch_acpi_processor_cleanup_pdc() in x86 and ia64 results in memory allocated for _PDC objects that is never freed and will cause memory leak in case of physical CPU remove and add. Patch fixes the memory leak by freeing the objects soon after _PDC is evaluated. Reported-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-06-18ACPI: allow drivers to request both device and system notify eventsBjorn Helgaas
System notify events (0x00-0x7f) are common across all device types and should be handled in Linux/ACPI, not in drivers. However, some BIOSes use system notify events in device-specific ways that require the driver to be involved. This patch adds a ACPI_DRIVER_ALL_NOTIFY_EVENTS driver flag. When a driver sets this flag and supplies a .notify method, Linux/ACPI calls the .notify method for ALL notify events on the device, not just the device-specific (0x80-0xff) events. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-06-17ACPI: kill acpi_get_physical_pci_device()Alexander Chiang
acpi_get_pci_dev() is (hopefully) better, and all callers have been converted, so let's get rid of this duplicated functionality. Cc: Thomas Renninger <trenn@suse.de> Signed-off-by: Alex Chiang <achiang@hp.com> Acked-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-06-17ACPI: kill acpi_get_pci_idAlexander Chiang
acpi_get_pci_dev() is better, and all callers have been converted, so eliminate acpi_get_pci_id(). Signed-off-by: Alex Chiang <achiang@hp.com> Acked-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-06-17ACPI: simplify acpi_pci_irq_del_prt() APIAlexander Chiang
There is no need to pass a segment/bus tuple to this API, as the callsite always has a struct pci_bus. We can derive segment/bus from the struct pci_bus, so let's take this opportunit to simplify the API and make life easier for the callers. Signed-off-by: Alex Chiang <achiang@hp.com> Acked-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-06-17ACPI: simplify acpi_pci_irq_add_prt() APIAlexander Chiang
A PCI domain cannot change as you descend down subordinate buses, which makes the 'segment' argument to acpi_pci_irq_add_prt() useless. Change the interface to take a struct pci_bus *, from whence we can derive the bus number and segment. Reducing the number of arguments makes life simpler for callers. Signed-off-by: Alex Chiang <achiang@hp.com> Acked-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Len Brown <len.brown@intel.com>
generated by cgit v1.2.3 (git 2.0.4) at 2024-06-04 16:13:28 +0000