summaryrefslogtreecommitdiff
path: root/include/media
AgeCommit message (Collapse)Author
2013-09-05Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds
Pull networking changes from David Miller: "Noteworthy changes this time around: 1) Multicast rejoin support for team driver, from Jiri Pirko. 2) Centralize and simplify TCP RTT measurement handling in order to reduce the impact of bad RTO seeding from SYN/ACKs. Also, when both timestamps and local RTT measurements are available prefer the later because there are broken middleware devices which scramble the timestamp. From Yuchung Cheng. 3) Add TCP_NOTSENT_LOWAT socket option to limit the amount of kernel memory consumed to queue up unsend user data. From Eric Dumazet. 4) Add a "physical port ID" abstraction for network devices, from Jiri Pirko. 5) Add a "suppress" operation to influence fib_rules lookups, from Stefan Tomanek. 6) Add a networking development FAQ, from Paul Gortmaker. 7) Extend the information provided by tcp_probe and add ipv6 support, from Daniel Borkmann. 8) Use RCU locking more extensively in openvswitch data paths, from Pravin B Shelar. 9) Add SCTP support to openvswitch, from Joe Stringer. 10) Add EF10 chip support to SFC driver, from Ben Hutchings. 11) Add new SYNPROXY netfilter target, from Patrick McHardy. 12) Compute a rate approximation for sending in TCP sockets, and use this to more intelligently coalesce TSO frames. Furthermore, add a new packet scheduler which takes advantage of this estimate when available. From Eric Dumazet. 13) Allow AF_PACKET fanouts with random selection, from Daniel Borkmann. 14) Add ipv6 support to vxlan driver, from Cong Wang" Resolved conflicts as per discussion. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1218 commits) openvswitch: Fix alignment of struct sw_flow_key. netfilter: Fix build errors with xt_socket.c tcp: Add missing braces to do_tcp_setsockopt caif: Add missing braces to multiline if in cfctrl_linkup_request bnx2x: Add missing braces in bnx2x:bnx2x_link_initialize vxlan: Fix kernel panic on device delete. net: mvneta: implement ->ndo_do_ioctl() to support PHY ioctls net: mvneta: properly disable HW PHY polling and ensure adjust_link() works icplus: Use netif_running to determine device state ethernet/arc/arc_emac: Fix huge delays in large file copies tuntap: orphan frags before trying to set tx timestamp tuntap: purge socket error queue on detach qlcnic: use standard NAPI weights ipv6:introduce function to find route for redirect bnx2x: VF RSS support - VF side bnx2x: VF RSS support - PF side vxlan: Notify drivers for listening UDP port changes net: usbnet: update addr_assign_type if appropriate driver/net: enic: update enic maintainers and driver driver/net: enic: Exposing symbols for Cisco's low latency driver ...
2013-09-03[media] v4l2: added missing mutex.h include to v4l2-ctrls.hAndrzej Hajda
This patch fixes following error: include/media/v4l2-ctrls.h:193:15: error: field ‘_lock’ has incomplete type include/media/v4l2-ctrls.h: In function ‘v4l2_ctrl_lock’: include/media/v4l2-ctrls.h:570:2: error: implicit declaration of function ‘mutex_lock’ [-Werror=implicit-function-declaration] include/media/v4l2-ctrls.h: In function ‘v4l2_ctrl_unlock’: include/media/v4l2-ctrls.h:579:2: error: implicit declaration of function ‘mutex_unlock’ [-Werror=implicit-function-declaration] Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com> Cc: stable@vger.kernel.org
2013-08-26[media] adv7511: add new video encoderHans Verkuil
This is an Analog Devices HDMI transmitter. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-08-26[media] adv7842: add new video decoder driverHans Verkuil
This is a Analog Devices Component/Graphics/SD Digitizer with 2:1 Multiplexed HDMI Receiver. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-08-24[media] v4l2-dv-timings: add callback to handle exceptionsHans Verkuil
In most cases the v4l2_bt_timings_cap struct has all the information necessary to determine valid timings, but occasionally there are exceptions. Add a callback function to be able to test for those exceptions. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-08-24[media] v4l2-dv-timings: rename v4l2_dv_valid_timings to v4l2_valid_dv_timingsHans Verkuil
All other functions follow the v4l2_<foo>_dv_timings pattern, do the same for this function. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-08-24[media] v4l2-dv-timings: export the timings listHans Verkuil
Some drivers need to be able to access the full list of timings. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-08-24[media] v4l2-dv-timings: rename v4l_match_dv_timings to v4l2_match_dv_timingsHans Verkuil
It's the only function in v4l2-dv-timings.c with the v4l prefix instead of v4l2. Make it consistent with the other functions. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-08-24[media] v4l2-dv-timings: add v4l2_print_dv_timings helperHans Verkuil
Drivers often have to log the contents of a dv_timings struct. Adding this helper will make it easier for drivers to do so. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-08-24[media] media: OF: add "sync-on-green-active" propertyLad, Prabhakar
This patch adds 'sync-on-green-active' property as part of endpoint property. Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-08-22[media] smiapp: Call the clock "ext_clk"Sakari Ailus
As the clock framework makes it possible to assign a device specific name to the clocks, remove the ability to use a named clock in the driver. Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-08-22[media] mt9v032: Use the common clock frameworkLaurent Pinchart
Configure the device external clock using the common clock framework instead of a board code callback function. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-08-18v4l2-common: warning fix (W=1): add a missed function prototypeMauro Carvalho Chehab
changeset d1e9b7c12 added a new ancilliary function to API, but forgot to add it to the corresponding header file. drivers/media/v4l2-core/v4l2-ctrls.c:568:18: warning: no previous prototype for 'v4l2_ctrl_get_int_menu' [-Wmissing-prototypes] const s64 const *v4l2_ctrl_get_int_menu(u32 id, u32 *len) Cc: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-08-18[media] saa7115: make multi-line comments compliant with CodingStyleMauro Carvalho Chehab
changeset 2ccf12a did a crappy job when added multi-line comment lines, violating CodingStyle. Change the comments added there to fulfill CodingStyle, and document the platform_data using Documentation/kernel-doc-nano-HOWTO.txt. Cc: Jon Arne Jørgensen <jonarne@jonarne.no> Cc: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-08-18[media] saa7115: Implement i2c_board_info.platform_dataJon Arne Jørgensen
This patch implements i2c_board_info.platform_data, and some options to override the default initialization table for the GM7113C and SAA7113 chips. Signed-off-by: Jon Arne Jørgensen <jonarne@jonarne.no> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-08-18[media] v4l2: move dv-timings related code to v4l2-dv-timings.cHans Verkuil
v4l2-common.c contained a bunch of dv-timings related functions. Move that to the new v4l2-dv-timings.c which is a more appropriate place for them. There aren't many drivers that do HDTV, so it is a good idea to separate common code related to that into a module of its own. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-08-18[media] v4l2-dv-timings: add new helper moduleHans Verkuil
This module makes it easy to filter valid timings from the full list of CEA and DMT timings based on the timings capabilities. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-08-18[media] tea575x: Move header from sound to mediaOndrej Zary
Move include/sound/tea575x-tuner.h to include/media/tea575x.h and update files that include it. Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Acked-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-08-18[media] media: vb2: Clarify queue_setup() and buf_prepare() usage documentationLaurent Pinchart
Explain how the two operations must handle formats and validate buffer sizes when used with VIDIOC_CREATE_BUFS. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-08-18[media] media: Add support for circular graph traversalLaurent Pinchart
The graph traversal API (media_entity_graph_walk_*) doesn't support cyclic graphs and will fail to correctly walk a graph when circular links exist. Support circular graph traversal by checking whether an entity has already been visited before pushing it to the stack. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Sakari Ailus <sakari.ailus@iki.fi> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-08-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
2013-08-02include: Convert ethernet mac address declarations to use ETH_ALENJoe Perches
It's convenient to have ethernet mac addresses use ETH_ALEN to be able to grep for them a bit easier and also to ensure that the addresses are __aligned(2). Add #include <linux/if_ether.h> as necessary. Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Mauro Carvalho Chehab <m.chehab@samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-31[media] media: lirc: Allow lirc dev to talk to rc deviceSrinivas Kandagatla
The use case is simple, if any rc device has allowed protocols = RC_TYPE_LIRC and map_name = RC_MAP_LIRC set, the driver open will be never called. The reason for this is, all of the key maps except lirc have some KEYS in there map, so during rc_register_device process these keys are matched against the input drivers and open is performed, so for the case of RC_MAP_EMPTY, a vt/keyboard is matched and the driver open is performed. In case of lirc, there is no match and result is that there is no open performed, however the lirc-dev will go ahead and create a /dev/lirc0 node. Now when lircd/mode2 opens this device, no data is available because the driver was never opened. Other case pointed by Sean Young, As rc device gets opened via the input interface. If the input device is never opened (e.g. embedded with no console) then the rc open is never called and lirc will not work either. So that's another case. lirc_dev seems to have no link with actual rc device w.r.t open/close. This patch adds rc_dev pointer to lirc_driver structure for cases like this, so that it can do the open/close of the real driver in accordance to lircd/mode2 open/close. Without this patch its impossible to open a rc device which has RC_TYPE_LIRC ad RC_MAP_LIRC set. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@st.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-07-31[media] media: rc: Add rc_open/close and use count to rc_devSrinivas Kandagatla
This patch adds user count to rc_dev structure, the reason to add this new member is to allow other code like lirc to open rc device directly. In the existing code, rc device is only opened by input subsystem which works ok if we have any input drivers to match. But in case like lirc where there will be no input driver, rc device will be never opened. Having this user count variable will be usefull to allow rc device to be opened from code other than rc-main. This patch also adds rc_open and rc_close functions for other drivers like lirc to open and close rc devices. This functions safely increment and decrement the user count. Other driver wanting to open rc device should call rc_open and rc_close, rather than directly modifying the rc_dev structure. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@st.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-07-30[media] V4L: Merge struct v4l2_async_subdev_list with struct v4l2_subdevSylwester Nawrocki
By integrating the v4l2-async API internals a bit more with the core overall the v4l2-async code becomes a bit simpler and easier to follow. Acked-and-tested-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-07-30[media] V4L: Rename subdev field of struct v4l2_async_notifierSylwester Nawrocki
This is a purely cosmetic change. Since the 'subdev' member points to an array of subdevs make it more explicit by renaming to the plural form. Acked-and-tested-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-07-30[media] V4L: Add V4L2_ASYNC_MATCH_OF subdev matching typeSylwester Nawrocki
Add support for matching by device_node pointer. This allows the notifier user to simply pass a list of device_node pointers corresponding to sub-devices. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-07-30[media] V4L: Rename v4l2_async_bus_* to v4l2_async_match_*Sylwester Nawrocki
enum v4l2_async_bus_type also selects a method subdevs are matched in the notification handlers, rename it to v4l2_async_match_type so V4L2_ASYNC_MATCH_OF entry can be further added for matching by device tree node pointer. Acked-and-tested-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-07-26[media] media: i2c: adv7343: make the platform data members as arrayLad, Prabhakar
This patch makes the platform data members as array wherever possible, so as this makes easier while collecting the data in DT case and read the entire array at once. This patch also makes appropriate changes to board-da850-evm.c Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Acked-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-07-26[media] media: davinci: vpif: display: add V4L2-async supportLad, Prabhakar
Add support for asynchronous subdevice probing, using the v4l2-async API. The legacy synchronous mode is still supported too, which allows to gradually update drivers and platforms. Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Cc: Hans Verkuil <hans.verkuil@cisco.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Sakari Ailus <sakari.ailus@iki.fi> Cc: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-07-26[media] media: davinci: vpif: capture: add V4L2-async supportLad, Prabhakar
Add support for asynchronous subdevice probing, using the v4l2-async API. The legacy synchronous mode is still supported too, which allows to gradually update drivers and platforms. Signed-off-by: Prabhakar Lad <prabhakar.csengg@gmail.com> Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Cc: Hans Verkuil <hans.verkuil@cisco.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Sakari Ailus <sakari.ailus@iki.fi> Cc: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-07-26[media] v4l2: added missing mutex.h include to v4l2-ctrls.hAndrzej Hajda
This patch fixes following error: include/media/v4l2-ctrls.h:193:15: error: field ‘_lock’ has incomplete type include/media/v4l2-ctrls.h: In function ‘v4l2_ctrl_lock’: include/media/v4l2-ctrls.h:570:2: error: implicit declaration of function ‘mutex_lock’ [-Werror=implicit-function-declaration] include/media/v4l2-ctrls.h: In function ‘v4l2_ctrl_unlock’: include/media/v4l2-ctrls.h:579:2: error: implicit declaration of function ‘mutex_unlock’ [-Werror=implicit-function-declaration] Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-07-26[media] mem2mem: add support for hardware buffered queuePhilipp Zabel
On mem2mem decoders with a hardware bitstream ringbuffer, to drain the buffer at the end of the stream, remaining frames might need to be decoded from the bitstream buffer without additional input buffers being provided. To achieve this, allow a queue to be marked as buffered by the driver, and allow scheduling of device_runs when buffered ready queues are empty. This also allows a driver to copy input buffers into their bitstream ringbuffer and immediately mark them as done to be dequeued. The motivation for this patch is hardware assisted h.264 reordering support in the coda driver. For high profile streams, the coda can hold back out-of-order frames, causing a few mem2mem device runs in the beginning, that don't produce any decompressed buffer at the v4l2 capture side. At the same time, the last few frames can be decoded from the bitstream with mem2mem device runs that don't need a new input buffer at the v4l2 output side. The decoder command ioctl can be used to put the decoder into the ringbuffer draining end-of-stream mode. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kamil Debski <k.debski@samsung.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-06-28[media] exynos4-is: Correct colorspace handling at FIMC-LITESylwester Nawrocki
Ensure the colorspace is properly adjusted by the driver for YUV and Bayer image formats. The subdev try_fmt helper is simplified. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-06-28[media] V4L2: soc-camera: fix uninitialised use compiler warningGuennadi Liakhovetski
In scan_async_group() if the size parameter is negative, the sasd pointer will be used uninitialised: drivers/media/platform/soc_camera/soc_camera.c: In function "soc_camera_host_register": drivers/media/platform/soc_camera/soc_camera.c:1514:55: warning: "sasd" may be used uninitialized in this function [-Wmaybe-uninitialized] sasd->asd.match.i2c.adapter_id, sasd->asd.match.i2c.address); ^ drivers/media/platform/soc_camera/soc_camera.c:1464:34: note: "sasd" was declared here struct soc_camera_async_subdev *sasd; Fix this by making "size" and the array, from which it is assigned unsigned. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-06-21[media] sh_mobile_ceu_camera: add asynchronous subdevice probing supportGuennadi Liakhovetski
Use the v4l2-async API to support asynchronous subdevice probing, including the CSI2 subdevice. Synchronous probing is still supported too. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-06-21[media] soc-camera: add V4L2-async supportGuennadi Liakhovetski
Add support for asynchronous subdevice probing, using the v4l2-async API. The legacy synchronous mode is still supported too, which allows to gradually update drivers and platforms. The selected approach adds a notifier for each struct soc_camera_device instance, i.e. for each video device node, even when there are multiple such instances registered with a single soc-camera host simultaneously. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-06-21[media] soc-camera: switch I2C subdevice drivers to use v4l2-clkGuennadi Liakhovetski
Instead of centrally enabling and disabling subdevice master clocks in soc-camera core, let subdevice drivers do that themselves, using the V4L2 clock API and soc-camera convenience wrappers. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-06-21[media] V4L2: support asynchronous subdevice registrationGuennadi Liakhovetski
Currently bridge device drivers register devices for all subdevices synchronously, typically, during their probing. E.g. if an I2C CMOS sensor is attached to a video bridge device, the bridge driver will create an I2C device and wait for the respective I2C driver to probe. This makes linking of devices straight forward, but this approach cannot be used with intrinsically asynchronous and unordered device registration systems like the Flattened Device Tree. To support such systems this patch adds an asynchronous subdevice registration framework to V4L2. To use it respective (e.g. I2C) subdevice drivers must register themselves with the framework. A bridge driver on the other hand must register notification callbacks, that will be called upon various related events. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Tested-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-06-21[media] V4L2: add a device pointer to struct v4l2_subdevGuennadi Liakhovetski
It is often useful to have simple means to get from a subdevice to the underlying physical device. This patch adds such a pointer to struct v4l2_subdev and sets it accordingly in the I2C and SPI cases. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Tested-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-06-21[media] V4L2: add temporary clock helpersGuennadi Liakhovetski
Typical video devices like camera sensors require an external clock source. Many such devices cannot even access their hardware registers without a running clock. These clock sources should be controlled by their consumers. This should be performed, using the generic clock framework. Unfortunately so far only very few systems have been ported to that framework. This patch adds a set of temporary helpers, mimicking the generic clock API, to V4L2. Platforms, adopting the clock API, should switch to using it. Eventually this temporary API should be removed. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-06-21[media] soc-camera: add host clock callbacks to start and stop the master clockGuennadi Liakhovetski
Currently soc-camera uses a single camera host callback to activate the interface master clock and to configure the interface for a specific client. However, during probing we might not have the information about a client, we just need to activate the clock. Add new camera host driver callbacks to only start and stop the clock without and client-specific configuration. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-06-21[media] soc-camera: move common code to soc_camera.cGuennadi Liakhovetski
All soc-camera host drivers include a pointer to an soc-camera device in their host private struct to check, that only one client is connected. Move this common code to soc_camera.c. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-06-21[media] v4l2: always require v4l2_dev, rename parent to dev_parentHans Verkuil
The last set of drivers still using the parent field of video_device instead of the v4l2_dev field have been converted, so v4l2_dev is now always set. A proper pointer to v4l2_dev is necessary these days otherwise the advanced debugging ioctls will not work when addressing sub-devices. It also ensures that the core can always go from a video_device struct to the top-level v4l2_device struct. There is still one single use case for the parent pointer: if there are multiple busses, each being the parent of one or more video nodes, and if they all share the same v4l2_device struct. In that case one still needs a parent pointer since the v4l2_device struct can only refer to a single parent device. The cx88 driver is one such case. Unfortunately, the cx88 failed to set the parent pointer since 3.6. The next patch will correct this. In order to support this use-case the parent pointer is only renamed to dev_parent, not removed altogether. It has been renamed to ensure that the compiler will catch any (possibly out-of-tree) drivers that were missed during the conversion. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Sakari Ailus <sakari.ailus@iki.fi> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-06-21[media] soc_camera: replace vdev->parent by vdev->v4l2_devHans Verkuil
The parent field will eventually disappear to be replaced by v4l2_dev. soc_camera does provide a v4l2_device struct but did not point to it in struct video_device. This is now fixed. Now the video nodes can be found under the correct platform bus, and the advanced debug ioctls work correctly as well (the core implementation of those ioctls requires that v4l2_dev is set correctly). Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-06-21[media] v4l2-core: remove support for obsolete VIDIOC_DBG_G_CHIP_IDENTHans Verkuil
This has been replaced by the new and much better VIDIOC_DBG_G_CHIP_INFO. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-06-21[media] v4l2-int-device: remove unused chip_ident referenceHans Verkuil
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Cc: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-06-21[media] v4l2-common: remove unused v4l2_chip_match/ident_i2c_client functionsHans Verkuil
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-06-21[media] v4l2: remove obsolete v4l2_chip_match_host()Hans Verkuil
This function is no longer needed since it is now the responsibility of the v4l2 core to check if the DBG_G/S_REGISTER and DBG_G_CHIP_INFO ioctls are called for the bridge driver or not. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-06-20Merge branch 'linus' into patchworkMauro Carvalho Chehab
* linus: (1465 commits) ARM: tegra30: clocks: Fix pciex clock registration lseek(fd, n, SEEK_END) does *not* go to eof - n Linux 3.10-rc6 smp.h: Use local_irq_{save,restore}() in !SMP version of on_each_cpu(). powerpc: Fix missing/delayed calls to irq_work powerpc: Fix emulation of illegal instructions on PowerNV platform powerpc: Fix stack overflow crash in resume_kernel when ftracing snd_pcm_link(): fix a leak... use can_lookup() instead of direct checks of ->i_op->lookup move exit_task_namespaces() outside of exit_notify() fput: task_work_add() can fail if the caller has passed exit_task_work() xfs: don't shutdown log recovery on validation errors xfs: ensure btree root split sets blkno correctly xfs: fix implicit padding in directory and attr CRC formats xfs: don't emit v5 superblock warnings on write mei: me: clear interrupts on the resume path mei: nfc: fix nfc device freeing mei: init: Flush scheduled work before resetting the device sctp: fully initialize sctp_outq in sctp_outq_init netiucv: Hold rtnl between name allocation and device registration. ...