summaryrefslogtreecommitdiff
path: root/include/media
AgeCommit message (Collapse)Author
2011-10-27media: video: tegra: ar0832: Sunny P8M01E supportCharlie Huang
Add support of Sunny P8M01E module (AKA aptina 8141) This new module is identical with 8140 plus pixel improvement. Use different recommended register settings for each sensor. Add function to figure out the sensor id and let the odm driver pick up the right config data. Bug 868929 Change-Id: I5f0c4c2376d50305e2872e2b34c6078597971146 Reviewed-on: http://git-master/r/53022 Reviewed-by: Charlie Huang <chahuang@nvidia.com> Tested-by: Charlie Huang <chahuang@nvidia.com> Reviewed-by: Frank Chen <frankc@nvidia.com> Reviewed-by: Dan Willemsen <dwillemsen@nvidia.com>
2011-09-09media: tegra_camera: Enable Null sensorkdivvela
Enable pd2vi_clk in case of Null sensor Bug 870406 Change-Id: I29ab4e4d3d24a54b2eace84eeb8266582e53dd1f Reviewed-on: http://git-master/r/50822 Reviewed-by: Bharat Nihalani <bnihalani@nvidia.com> Tested-by: Krupal Divvela <kdivvela@nvidia.com> Reviewed-by: Prayas Mohanty <pmohanty@nvidia.com>
2011-08-17media: video: ov5650: add 2x2 binning mode controlChangyeon Jo
Add IOCTL (OV5650_IOCTL_SET_BINNING) that user code can access to registers which have 2x2 binning control bits. Bug 835589 Change-Id: I07f8d3536fcdb92e8bae0af294d1a0f8523cefbc Reviewed-on: http://git-master/r/43727 Tested-by: Changyeon Jo <cjo@nvidia.com> Reviewed-by: Bharat Nihalani <bnihalani@nvidia.com>
2011-08-03ARM: Tegra: Sh532u: enable focuser attached to right cameragaryz
The sh532u focuser is enabled to pair with the stereo right camera with the required power control configurations. Bug 827897 Change-Id: Icc21bcd2327671da193a8b8f24c338b0b2f6729c Reviewed-on: http://git-master/r/36571 Reviewed-by: Varun Colbert <vcolbert@nvidia.com> Tested-by: Varun Colbert <vcolbert@nvidia.com>
2011-07-20media: video: tegra: enable ov9726 sensorCharlie Huang
initial support for sensor ov9726 bug 829399 Change-Id: I67315dfce7baf2c14f49bf526c10fe19cf32d1d3 Reviewed-on: http://git-master/r/40472 Reviewed-by: Daniel Willemsen <dwillemsen@nvidia.com> Reviewed-by: Chonglei Huang <chahuang@nvidia.com> Tested-by: Chonglei Huang <chahuang@nvidia.com>
2011-07-15media: video: tegra: support multiple camerasJihoon Bang
Separate board specific sequence from ar0832 driver and add it to board files. Add function that changes device slave address in real time to support multiple devices in the same I2C bus. Bug 844021 Change-Id: I48641909eb531b4ba827096bc30fa4eccf83469e Reviewed-on: http://git-master/r/40385 Reviewed-by: Daniel Willemsen <dwillemsen@nvidia.com> Reviewed-by: Jihoon Bang <jbang@nvidia.com> Tested-by: Jihoon Bang <jbang@nvidia.com>
2011-07-11media: video: tegra: enable ar0832 sensorJihoon Bang
Support only one sensor for now. Change-Id: I1d0b804077e271052a6d6f4554865675fa70d612 Reviewed-on: http://git-master/r/36779 Reviewed-by: Varun Colbert <vcolbert@nvidia.com> Tested-by: Varun Colbert <vcolbert@nvidia.com>
2011-07-07media: video: tegra: TPS61050 flash driverDanielle Sun
Kernel driver for TPS61050 flash/torch camera device. Bug 794431 Change-Id: I760bd086c283076dc7136bd8ccd6b75e6e823ea8 Reviewed-on: http://git-master/r/34208 Tested-by: Erik M Lilliebjerg <elilliebjerg@nvidia.com> Reviewed-by: Michael Stewart <mstewart@nvidia.com> Reviewed-by: John Sasinowski <jsasinowski@nvidia.com> Reviewed-by: Bharat Nihalani <bnihalani@nvidia.com>
2011-07-07media: video: update copyright headersFrank Chen
update headers for camera files bug 846086 Change-Id: Id53c77ead17b569ad05c0a5b8ec7f2a5d1aef869 Reviewed-on: http://git-master/r/39102 Reviewed-by: Erik M Lilliebjerg <elilliebjerg@nvidia.com> Reviewed-by: Abhinav Sinha <absinha@nvidia.com> Reviewed-by: Michael Stewart <mstewart@nvidia.com> Tested-by: Frank Chen <frankc@nvidia.com> Reviewed-by: Jonathan Mayo <jmayo@nvidia.com>
2011-05-18media: video: ov5650: synchronize sensors for stereoPrayas Mohanty
For stereo camera, it is important that both sensors should start sending data at the same time for them to be in sync. Add IOCTL (OV5650_IOCTL_SYNC_SENSORS), which user code can access to synchronize both sensors. bug 787214 bug 786928 Change-Id: I6bf34a8af3b7dd51150d5c0247b6787b824c1dae Reviewed-on: http://git-master/r/30005 Reviewed-by: Bharat Nihalani <bnihalani@nvidia.com> Tested-by: Bharat Nihalani <bnihalani@nvidia.com>
2011-05-11media: sh532u: Adding board related init/deinitLaxman Dewangan
When device sh532u is open, it calls board related initialization and de- initialization function. In the board related functions, the client can initialize the required signal, power on/off the device etc. bug 802264 Change-Id: Ie69a6e70c5d104489d248bef538e89263208ee54 Reviewed-on: http://git-master/r/30169 Tested-by: Laxman Dewangan <ldewangan@nvidia.com> Reviewed-by: Laxman Dewangan <ldewangan@nvidia.com> Reviewed-by: Danielle Sun <dsun@nvidia.com> Tested-by: Danielle Sun <dsun@nvidia.com> Reviewed-by: Prayas Mohanty <pmohanty@nvidia.com>
2011-05-05ARM: Tegra: Sh532u: Add focus motor state checkGary Zhang
Return last requested position if the motor settled or timeout occurs. Change-Id: Ib0ff58b827fcf871dbf185eb0a284b7fe010aef2 Reviewed-on: http://git-master/r/27978 Reviewed-by: Frank Chen <frankc@nvidia.com> Reviewed-by: Andrei Denissov <adenissov@nvidia.com> Reviewed-by: Gary Zhang <garyz@nvidia.com> Tested-by: Gary Zhang <garyz@nvidia.com> Reviewed-by: Scott Williams <scwilliams@nvidia.com>
2011-05-03media: video: tegra: ov5650: updated copyrightsPritesh Raithatha
Change-Id: I6f0bc3b5859c8545853051f10bda60ab6ac3dd8b Bug 819975 Reviewed-on: http://git-master/r/29467 (cherry picked from commit 9c4eac8a44eef360c2e5be07838fecc78096847f) Change-Id: If868656a2c8811593974723e85010257b07ed22b Reviewed-on: http://git-master/r/29972 Reviewed-by: Pritesh Raithatha <praithatha@nvidia.com> Tested-by: Pritesh Raithatha <praithatha@nvidia.com> Reviewed-by: Bharat Nihalani <bnihalani@nvidia.com>
2011-04-15camera: Add driver for soc380 front sensorAbhinav Sinha
Bug: 783488 Change-Id: I0d70ec5bb0fd880b167e9ced0e002829abeccdbf Reviewed-on: http://git-master/r/24969 Reviewed-by: Varun Colbert <vcolbert@nvidia.com> Tested-by: Varun Colbert <vcolbert@nvidia.com>
2011-04-15media: video: tegra: AD5820: Add AD5820 focuser driver.Frank Chen
Add AD5820 focuser driver for Whistler. Bug 783488 Change-Id: I0d8a08e7df9f472ffc4edfe7bfa255357bff5126 Reviewed-on: http://git-master/r/26970 Reviewed-by: Varun Colbert <vcolbert@nvidia.com> Tested-by: Varun Colbert <vcolbert@nvidia.com>
2011-04-14media: video: tegra: ov5650: add stereo camera supportPritesh Raithatha
-Removed unused sensor mode mode_1920x1088 -Added ov5650_write_reg_helper function to do write_reg() according to camera_mode. -ov5650_get_status function is removed as it is reading reg 2 value and there is not any definition of reg 2 in datasheet and even user space is not using it's value at all. -Added ov5650_set_power function to on/off camera sensors power according to camera_mode. -Added ioctl OV5650_IOCTL_SET_CAMERA_MODE to set camera_mode from user space. -Added i2c driver for right ov5650. Bug 809921 Change-Id: Ib3cf43d0a064c18c218d0850e849fff84e18e661 Reviewed-on: http://git-master/r/26857 Tested-by: Pritesh Raithatha <praithatha@nvidia.com> Reviewed-by: George Bauernschmidt <georgeb@nvidia.com> Reviewed-by: Bharat Nihalani <bnihalani@nvidia.com>
2011-03-24media: video: tegra: SH532U: fix formatting errorsQinggang Zhou
- fix an incorrect i2c address and a function return check. - add checks for function returns. - remove the developer name in the beginning comment. - fix an uninitialized variable.. Change-Id: I2d42025b7ff47eb6228e626e65990f4da04b94ac Reviewed-on: http://git-master/r/23594 Reviewed-by: Jonathan Mayo <jmayo@nvidia.com> Tested-by: Qinggang Zhou <qzhou@nvidia.com> Reviewed-by: Yu-Huan Hsu <yhsu@nvidia.com>
2011-03-17media: video: tegra: SH532U: Add the SH532U focuser driver.Qinggang Zhou
This focuser is from SEMCO and is integrated with OV5650 sensor and LC898211 driver. bug 778859 Change-Id: I6e5dcc129c72aed7d92a00a1d926424050583c1d Reviewed-on: http://git-master/r/22711 Reviewed-by: Qinggang Zhou <qzhou@nvidia.com> Tested-by: Qinggang Zhou <qzhou@nvidia.com> Reviewed-by: Bharat Nihalani <bnihalani@nvidia.com> Tested-by: Bharat Nihalani <bnihalani@nvidia.com> Reviewed-by: Jonathan Mayo <jmayo@nvidia.com>
2011-03-04Kernel driver for SSL3250A flash/torch camera device.Erik Lilliebjerg
Change-Id: Id5cb40c9823c7fcfd26e45e4608c45b16a2d431a Reviewed-on: http://git-master/r/21351 Reviewed-by: Erik M Lilliebjerg <elilliebjerg@nvidia.com> Tested-by: Erik M Lilliebjerg <elilliebjerg@nvidia.com> Reviewed-by: George Bauernschmidt <georgeb@nvidia.com> Reviewed-by: Bharat Nihalani <bnihalani@nvidia.com>
2011-02-16media: video: tegra: add ov5650 test pattern modeNathan Lord
Change-Id: Ie894d71f45cc08709daff3f258e0c4676b7778b0 Reviewed-on: http://git-master/r/19687 Reviewed-by: Nathan Lord <nlord@nvidia.com> Tested-by: Nathan Lord <nlord@nvidia.com> Reviewed-by: Bharat Nihalani <bnihalani@nvidia.com>
2011-02-08media: video: tegra: add driver for ov2710Nathan Lord
Change-Id: I9d9a9a301f23398a13fa7d865058f384288f6c92 Reviewed-on: http://git-master/r/18537 Reviewed-by: Nathan Lord <nlord@nvidia.com> Tested-by: Nathan Lord <nlord@nvidia.com> Reviewed-by: Jonathan Mayo <jmayo@nvidia.com> Reviewed-by: Pritesh Raithatha <praithatha@nvidia.com> Reviewed-by: Bharat Nihalani <bnihalani@nvidia.com>
2011-01-10merging android-tegra-2.6.36 into git-master/linux-2.6/android-tegra-2.6.36Nitin Kumbhar
Conflicts: arch/arm/mach-tegra/fuse.c drivers/misc/Makefile Change-Id: I300b925d78b31efe00c342190d8dbd50e2e81230
2011-01-07Merge commit 'v2.6.36.3' into linux-tegra-2.6.36Colin Cross
2011-01-07Don't export format_by_forcc on two different driversMauro Carvalho Chehab
commit a757ee2216211278680dd8ac869aabe7b4a9970d upstream. Drivers should append their name on exported symbols, to avoid conflicts with allyesconfig: drivers/staging/built-in.o: In function `format_by_fourcc': /home/v4l/work_trees/linus/drivers/staging/cx25821/cx25821-video.c:96: multiple definition of `format_by_fourcc' drivers/media/built-in.o:/home/v4l/work_trees/linus/drivers/media/common/saa7146_video.c:88: first defined here Let's rename both occurences with a small shellscript: for i in drivers/staging/cx25821/*.[ch]; do sed s,format_by_fourcc,cx25821_format_by_fourcc,g <$i >a && mv a $i; done for i in drivers/media/common/saa7146*.[ch]; do sed s,format_by_fourcc,saa7146_format_by_fourcc,g <$i >a && mv a $i; done for i in include/media/saa7146*.[ch]; do sed s,format_by_fourcc,saa7146_format_by_fourcc,g <$i >a && mv a $i; done Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-12-14[misc] cancel executable permission on source filesChao Jiang
Source files should not be with executable permission. Change-Id: I70b6be4cf88fea4be9b092ca2f5dd08e40ee7cbd Reviewed-on: http://git-master/r/12081 Reviewed-by: Chao Jiang <chaoj@nvidia.com> Tested-by: Chao Jiang <chaoj@nvidia.com> Reviewed-by: Bharat Nihalani <bnihalani@nvidia.com>
2010-11-21camera: add driver for ov5650Pritesh Raithatha
Change-Id: I127ea2a132adf2126c28194e8d778cc46b0a2e63 Reviewed-on: http://git-master/r/10573 Reviewed-by: Chien-Yu Chen <chichen@nvidia.com> Reviewed-by: Bharat Nihalani <bnihalani@nvidia.com> Tested-by: Bharat Nihalani <bnihalani@nvidia.com>
2010-11-02media: video: tegra: add basic camera/isp supportRebecca Schultz Zavin
The tegra_camera device includes all clock and regulator functionality needed to support camera on tegra. Change-Id: I281f1cb5f360276af832309e35dbe17c98b62bb3 Signed-off-by: Dima Zavin <dima@android.com>
2010-10-19Merge remote branch 'android-tegra-2.6.36'Dan Willemsen
Conflicts: arch/arm/configs/tegra_defconfig arch/arm/mach-tegra/tegra_i2s_audio.c Change-Id: Ib0d7fc5c84b21a58f78a4a987c245e0e110ff437
2010-10-13media: video: tegra: Move tegra_isp to tegra_camera and add functionalityRebecca Schultz Zavin
The tegra_camera device has been extended to include all clock and regulator functionality needed by to support camera on tegra. Change-Id: Ie1611a79c24f7ebe3ae570d38a9f470683af91dd Signed-off-by: Rebecca Schultz Zavin <rebecca@android.com>
2010-10-13media: video: Add stub isp driver for tegraRebecca Schultz Zavin
Change-Id: I6ff1bf0e72ef69b59d5875bd60c7cd825fa2ca4f Signed-off-by: Rebecca Schultz Zavin <rebecca@android.com>
2010-09-27V4L/DVB: videobuf-dma-sg: set correct size in last sg elementHans Verkuil
This fixes a nasty memory corruption bug when using userptr I/O. The function videobuf_pages_to_sg() sets up the scatter-gather list for the DMA transfer to the userspace pages. The first transfer is setup correctly (the size is set to PAGE_SIZE - offset), but all other transfers have size PAGE_SIZE. This is wrong for the last transfer which may be less than PAGE_SIZE. Most, if not all, drivers will program the boards DMA engine correctly, i.e. even though the size in the last sg element is wrong, they will do their own size calculations and make sure the right amount is DMA-ed, and so seemingly prevent memory corruption. However, behind the scenes the dynamic DMA mapping support (in lib/swiotlb.c) may create bounce buffers if the memory pages are not in DMA-able memory. This happens for example on a 64-bit linux with a board that only supports 32-bit DMA. These bounce buffers DO use the information in the sg list to determine the size. So while the DMA engine transfers the correct amount of data, when the data is 'bounced' back too much is copied, causing buffer overwrites. The fix is simple: calculate and set the correct size for the last sg list element. Signed-off-by: Hans Verkuil <hans.verkuil@tandberg.com> Cc: stable@kernel.org Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-08V4L/DVB: cx2341x: convert to the control frameworkHans Verkuil
Since this module is also used by drivers that are not yet converted, the old and new code have to co-exist. The source is split into three parts: a common part at the top, which is used by both old and new code, then the old code followed by the new control framework implementation. This new code is much more readable (and shorter!) than the original code. Once all bridge drivers that use this are converted the old code can be deleted. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-08V4L/DVB: cx25840/ivtv: replace ugly priv control with s_configHans Verkuil
The cx25840 used a private control CX25840_CID_ENABLE_PVR150_WORKAROUND to be told whether to enable a workaround for certain pvr150 cards. This is really config data that it needs to get at load time. Implemented this in cx25840 and ivtv. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-08V4L/DVB: v4l2: Add new control handling frameworkHans Verkuil
Add a new framework to handle controls which makes life for driver developers much easier. Note that this patch moves some of the control support that used to be in v4l2-common.c to v4l2-ctrls.c. The tables were copied unchanged. The body of v4l2_ctrl_query_fill() was copied to a new v4l2_ctrl_fill() function in v4l2-ctrls.c. This new function doesn't use the v4l2_queryctrl struct anymore, which makes it more general. The remainder of v4l2-ctrls.c is all new. Highlights include: - No need to implement VIDIOC_QUERYCTRL, QUERYMENU, S_CTRL, G_CTRL, S_EXT_CTRLS, G_EXT_CTRLS or TRY_EXT_CTRLS in either bridge drivers or subdevs. New wrapper functions are provided that can just be plugged in. Once everything has been converted these wrapper functions can be removed as well. - When subdevices are added their controls can be automatically merged with the bridge driver's controls. - Most drivers just need to implement s_ctrl to set the controls. The framework handles the locking and tries to be as 'atomic' as possible. - Ready for the subdev device nodes: the same mechanism applies to subdevs and their device nodes as well. Sub-device drivers can make controls local, preventing them from being merged with bridge drivers. - Takes care of backwards compatibility handling of VIDIOC_S_CTRL and VIDIOC_G_CTRL. Handling of V4L2_CID_PRIVATE_BASE is fully transparent. CTRL_CLASS controls are automatically added. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-08V4L/DVB: IR: extend interfaces to support more device settingsMaxim Levitsky
LIRC: add new IOCTL that enables learning mode (wide band receiver) Still missing features: carrier report & timeout reports. Will need to pack these into ir_raw_event Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-08V4L/DVB: IR: add helper function for hardware with small o/b bufferMaxim Levitsky
Some ir input devices have small buffer, and interrupt the host each time it is full (or half full) Add a helper that automaticly handles timeouts, and also automaticly merges samples of same time (space-space) Such samples might be placed by hardware because size of sample in the buffer is small (a byte for example). Also remove constness from ir_dev_props, because it now contains timeout settings that driver might want to change Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com> Acked-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-08V4L/DVB: IR: Allow not to compile keymaps inMaxim Levitsky
Currently, ir device registration fails if keymap requested by driver is not found. Fix that by always compiling in the empty keymap, and using it as a failback. Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com> Acked-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-08V4L/DVB: staging/lirc: port lirc_streamzap to ir-coreJarod Wilson
This ports lirc_streamzap.c over to ir-core in-place, to be followed by a patch moving the driver over to drivers/media/IR/streamzap.c and enabling the proper Kconfig bits. Presently, the in-kernel keymap doesn't work, as the stock Streamzap remote uses an RC-5-like, but not-quite-RC-5 protocol, which the in-kernel RC-5 decoder doesn't cope with. The remote can be used right now with the lirc bridge driver though, and other remotes (at least an RC-6(A) MCE remote) work perfectly with the driver. I'll take a look at making the existing RC-5 decoder cope with this odd duck, possibly implement another standalone decoder engine, or just throw up my hands and say "meh, use lirc"... But the driver itself should be perfectly sound. Remaining items on the streamzap TODO list: - add LIRC_SET_REC_TIMEOUT-alike support - add LIRC_GET_M{AX,IN}_TIMEOUT-alike support - add LIRC_GET_REC_RESOLUTION-alike support All of the above should be trivial to add. There are patches pending to add this support to ir-core from Maxim Levitsky, and I'll take care of these once his patches get integrated. None of them are currently essential though. Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-08V4L/DVB: v4l2_subdev: Get rid of now unused IR pulse width definesAndy Walls
Signed-off-by: Andy Walls <awalls@md.metrocast.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-08V4L/DVB: v4l2_subdev: Move interrupt_service_routine ptr to v4l2_subdev_core_opsAndy Walls
The CX2584x and related cores are multifunction subdevices with a number of internal blocks that act as interrupt sources. Move the v4L2_subdev interrupt_service_routine callback from v4l_subdev_ir_ops to v4l2_subdev_core_ops, as the video and audio blocks of a CX2584x and related cores can generate interrupts along with the IR block. This change also makes sense for other subdev's that generate interrupts and do not have an IR block. Signed-off-by: Andy Walls <awalls@md.metrocast.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-08V4L/DVB: v4l2_subdev, cx23885: Differentiate IR carrier sense and I/O pin ↵Andy Walls
inversion There is a distinction on IR Tx for the CX2388[578] chips of carrier sense inversion (space is a carrier burst and mark is no burst) and I/O pin level inversion (0 is high output level, 1 is low output level). Allow the caller to set these parameters distinctly as v4l2_subdevice IR parameters. This permits the IR device to be configured and enabled without the IR Tx LED being on during idle/space time due to an external hardware level inversion Signed-off-by: Andy Walls <awalls@md.metrocast.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-08V4L/DVB: cx25840: Add s_io_pin_config core subdev ops for the CX2388[578]Andy Walls
Add s_io_pin_config core subdev op for the CX2388[578] AV cores. This is complete for IR_RX, IR_TX, GPIOs 16,19-23, and IRQ_N. It likely needs work for the I2S signal direction. Signed-off-by: Andy Walls <awalls@md.metrocast.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-08V4L/DVB: v4l2_subdev: Add s_io_pin_config to v4l2_subdev_core_opsAndy Walls
Add a method to v4l2_sudev_core_ops to allow bridge drivers to manage what signal pads/functions are routed out to multiplexed IO pins on a pin by pin basis. The interface also allows specifying initial output settings for pins and disabling an IO pin altogether. Signed-off-by: Andy Walls <awalls@md.metrocast.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-02V4L/DVB: dib0700: break keytable into NEC and RC-5 variantsMauro Carvalho Chehab
Instead of having one big keytable with 2 protocols inside, break it into two separate tables, being one for NEC and another for RC-5 variants, and properly identify what variant should be used at the boards entries. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-02V4L/DVB: Add a keymap file with dib0700 tableMauro Carvalho Chehab
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-02V4L/DVB: V4L2: sh_mobile_camera_ceu: add support for CSI2Guennadi Liakhovetski
Using CEU with CSI2 on SH-Mobile requires some special configuration of the former. We also have to switch from calling only one subdev .s_mbus_fmt and .try_mbus_fmt to calling all subdevices. Take care to increment CSI2 driver use count to prevent it from unloading, while in use. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-02V4L/DVB: V4L2: soc-camera: add a MIPI CSI-2 driver for SH-Mobile platformsGuennadi Liakhovetski
Some SH-Mobile SoCs implement a MIPI CSI-2 controller, that can interface to several video clients and send data to the CEU or to the Image Signal Processor. This patch implements a v4l2-subdevice driver for CSI-2 to be used within the soc-camera framework, implementing the second subdevice in addition to the actual video clients. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-02V4L/DVB: V4L2: soc-camera: export soc-camera bus type for notificationsGuennadi Liakhovetski
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-02V4L/DVB: V4L2: mediabus: add 12-bit Bayer and YUV420 pixel formatsGuennadi Liakhovetski
These formats belong to the standard format set, defined by the MIPI CSI-2 specification. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-02V4L/DVB: mediabus: fix ambiguous pixel code namesGuennadi Liakhovetski
Endianness notation is meaningless for 8 bit YUYV codes. Switch pixel code names to explicitly state the order of colour components in the data stream. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
generated by cgit v1.2.3 (git 2.0.4) at 2024-06-21 22:39:27 +0000