summaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)Author
2010-03-07Merge branch 'x86-mrst-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-mrst-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (30 commits) x86, mrst: Fix whitespace breakage in apb_timer.c x86, mrst: Fix APB timer per cpu clockevent x86, mrst: Remove X86_MRST dependency on PCI_IOAPIC x86, olpc: Use pci subarch init for OLPC x86, pci: Add arch_init to x86_init abstraction x86, mrst: Add Kconfig dependencies for Moorestown x86, pci: Exclude Moorestown PCI code if CONFIG_X86_MRST=n x86, numaq: Make CONFIG_X86_NUMAQ depend on CONFIG_PCI x86, pci: Add sanity check for PCI fixed bar probing x86, legacy_irq: Remove duplicate vector assigment x86, legacy_irq: Remove left over nr_legacy_irqs x86, mrst: Platform clock setup code x86, apbt: Moorestown APB system timer driver x86, mrst: Add vrtc platform data setup code x86, mrst: Add platform timer info parsing code x86, mrst: Fill in PCI functions in x86_init layer x86, mrst: Add dummy legacy pic to platform setup x86/PCI: Moorestown PCI support x86, ioapic: Add dummy ioapic functions x86, ioapic: Early enable ioapic for timer irq ... Fixed up semantic conflict of new clocksources due to commit 17622339af25 ("clocksource: add argument to resume callback").
2010-03-07Merge branch 'for-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6 * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: (66 commits) mfd: Fix ucb1x00 build failure for collie_defconfig mfd: Fix lpc_sch related depends/selects, fix build error gpio: Fix sch_gpio warning gpio: add Intel SCH GPIO controller driver i2c: convert i2c-isch to platform_device mfd: Use completion interrupt for WM831x AUXADC mfd: Use completion interrupt for WM835x AUXADC mfd: Introduce remove_script function for twl4030 mfd/mmc: SDHI Kconfig update mfd: sh_mobile_sdhi MMC_CAP_MMC_HIGHSPEED support gpiolib: Force wm831x GPIOs into GPIO mode when requested mfd: Add WM831x revision B support gpiolib: Correct debugfs display of WM831x GPIO inversion gpiolib: Actually set output state in wm831x_gpio_direction_output() tmio_mmc: Balance cell enable()/disable() calls tmio_mmc: Remove const from platform data V3 tmio_mmc: Use 100ms mmc_detect_change() delay tmio_mmc: Add MMC_CAP_MMC_HIGHSPEED support V2 tmio_mmc: Keep card-detect interrupts enabled mfd: Add twl6030 base addr for ID0, ID1, ID2 ...
2010-03-07Merge git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: (26 commits) sh: Convert sh to use read/update_persistent_clock sh: Move PMB debugfs entry initialization to later stage sh: Fix up flush_cache_vmap() on SMP. sh: fix up MMU reset with variable PMB mapping sizes. sh: establish PMB mappings for NUMA nodes. sh: check for existing mappings for bolted PMB entries. sh: fixed virt/phys mapping helpers for PMB. sh: make pmb iomapping configurable. sh: reworked dynamic PMB mapping. sh: Fix up cpumask_of_pcibus() for the NUMA build. serial: sh-sci: Tidy up build warnings. sh: Fix up ctrl_read/write stragglers in migor setup. serial: sh-sci: Add DMA support. dmaengine: shdma: extend .device_terminate_all() to record partial transfer sh: merge sh7722 and sh7724 DMA register definitions sh: activate runtime PM for dmaengine on sh7722 and sh7724 dmaengine: shdma: add runtime PM support. dmaengine: shdma: separate DMA headers. dmaengine: shdma: convert to platform device resources dmaengine: shdma: fix DMA error handling. ...
2010-03-07Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6: PM: Provide generic subsystem-level callbacks PM / Runtime: Document power.runtime_auto and related functions
2010-03-07mfd: Fix ucb1x00 build failure for collie_defconfigPeter Huewe
This patch fixes a build failure[1], by adding the missing semaphore.h include References: [1] http://kisskb.ellerman.id.au/kisskb/buildresult/2234322/ Signed-off-by: Peter Huewe <peterhuewe@gmx.de> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-03-07mfd: Use completion interrupt for WM831x AUXADCMark Brown
Use the completion interrupt generated by the device rather than polling for conversions to complete. As a backup we still check the status of the AUXADC if we don't get a completion, mostly for systems that don't have the WM831x interrupt infrastructure hooked up. Also reduce the timeout for completion of conversions to 5ms from the previous 10ms, the lower timeout should be sufficient. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-03-07mfd: Use completion interrupt for WM835x AUXADCMark Brown
Use the completion interrupt generated by the device rather than polling for conversions to complete. As a backup we still check the state of the AUXADC if we don't get a completion, mostly for systems that don't have the WM8350 interrupt infrastructure hooked up. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-03-07mfd: Introduce remove_script function for twl4030Mike Turquette
New function twl4030_remove_script(u8 flags) takes a script type as defined in twl.h and prevents any script already loaded in that position from running. This is accomplished by programming SEQ_ADD_* to 0x3f, the END_OF_SCRIPT value, where SEQ_ADD_* is determined by flags. (Future) users of this function include OMAP board files for machines facing a race condition between sleep and warm reset. Signed-off-by: Mike Turquette <mturquette@ti.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-03-07mfd: Add WM831x revision B supportMark Brown
Revision B of the WM831x devices changes the sense of the tristate bit for GPIO configuration, inverting it to become an enable instead. Take account of this in the gpiolib driver. A current sink regulation status bit has also been added in revision B, add a flag indicating if it's present but don't use it yet. This revision also adds an interrupt on key up for the ON pin event which the existing code is able to take advantage of. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-03-07tmio_mmc: Remove const from platform data V3Magnus Damm
Remove const from the tmio-mmc platform data hclk V3. This change makes it possible to remove the type cast from the sh_mobile_sdhi driver which is using the clock framework to get the clock rate. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-03-07tmio_mmc: Add MMC_CAP_MMC_HIGHSPEED support V2Yusuke Goda
Enable MMC_CAP_XX support in the tmio_mmc driver if pdata->capabilities is set. Signed-off-by: Yusuke Goda <goda.yusuke@renesas.com> Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-03-07mfd: Add twl6030 base addr for ID0, ID1, ID2Balaji T K
Add base address for generic slave ID0, ID1, ID2 and introduced one more entry to align RTC module number between twl4030 and twl6030 Signed-off-by: Balaji T K <balajitk@ti.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-03-07mfd: Disable TWL4030/5030 I2C1/I2C4 internal pull-upsMoiz Sonasath
This patch disables TWL4030/5030 I2C1 adn I2C4(SR) internal pull-up, to use only the external HW resistor >=470 Ohm for the assured functionality in HS mode. While testing the I2C in High Speed mode, it was discovered that without a proper pull-up resistor, there is data corruption during multi-byte transfer. RTC(time_set) test case was used for testing. From the analysis done, it was concluded that ideally we need a pull-up of 1.6k Ohm(recomended) or atleast 470 Ohm or greater for assured performance in HS mode. Signed-off-by: Moiz Sonasath <m-sonasath@ti.com> Signed-off-by: Allen Pais <allen.pais@ti.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-03-07mfd: Use genirq in 88pm860xHaojian Zhuang
Use genirq to simplify IRQ handling in 88pm860x. Remove the interface of mask/free IRQs on 88pm860x. All these work is taken by genirq. Update the touchscreen driver of 88pm860x since IRQ handling is changed. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-03-07mfd: Clean code in max8925Haojian Zhuang
Remove unused definitions. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-03-07mfd: Update irq handler in max8925Haojian Zhuang
Update thread irq handler. Simply the interface of using thread irq. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-03-07mfd: Add initial WM8994 supportMark Brown
The WM8994 is a highly integrated ultra low power audio hub CODEC. Since it includes on-board regulators and GPIOs it is represented as a multi-function device, though the overwhelming majority of the functionality is provided by the ASoC CODEC driver. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-03-07mfd: Add WM8994 register definitionsMark Brown
As a separate patch due to the large size. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-03-07mfd: Remove leftover from discontinued TWL4030 battery patchChristoph Egger
The TWL4030_BCI_BATTERY config option originates from a patch to the omap git tree. However inclusion in linux was seemingly rejected and the functionality nears inclusion under a different name so this removes the bits of the old version that made it into the mainline kernel again. Signed-off-by: Christoph Egger <siccegge@stud.informatik.uni-erlangen.de> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-03-07mfd: Add HTCPLD driverCory Maccarrone
This change introduces a driver for the HTC PLD chip found on some smartphones, such as the HTC Wizard and HTC Herald. It works through the I2C bus and acts as a GPIO extender. Specifically: * it can have several sub-devices, each with its own I2C address * Each sub-device provides 8 output and 8 input pins * The chip attaches to one GPIO to signal when any of the input GPIOs change -- at which point all chips must be scanned for changes This driver implements the GPIOs throught the kernel's GPIO and IRQ framework. This allows any GPIO-servicing drivers to operate on htcpld pins, such as the gpio-keys and gpio-leds drivers. Signed-off-by: Cory Maccarrone <darkstar6262@gmail.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-03-07mfd: Add subdevs in max8925Haojian Zhuang
Add subdevs in MAX8925. MAX8925 includes regulator, backlight and touch components. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-03-07mfd: Initial max8925 supportHaojian Zhuang
Basic Max8925 support, which is a power management IC from Maxim Semiconductor. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-03-07input: Enable touch on 88pm860xHaojian Zhuang
Enable touchscreen driver for the 88pm860x multi function core. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Acked-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-03-07mfd: Append subdev into 88pm860x driverHaojian Zhuang
Append backlight, led & touch subdevs into 88pm860x driver. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-03-07mfd: Add irq support in 88pm860xHaojian Zhuang
88PM860x is a complex PMIC device. It contains touch, charger, sound, rtc, backlight, led, and so on. Host communicates to 88PM860x by I2C bus. Use thread irq to support this usage case. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-03-07mfd: Support 88pm8606 in 860x driverHaojian Zhuang
88PM8606 and 88PM8607 are two discrete chips used for power management. Hardware designer can use them together or only one of them according to requirement. There's some logic tightly linked between these two chips. For example, USB charger driver needs to access both chips by I2C interface. Now share one driver to these two devices. Only one I2C client is identified in platform init data. If another chip is also used, user should mark it in companion_addr field of platform init data. Then driver could create another I2C client for the companion chip. All I2C operations are accessed by 860x-i2c driver. In order to support both I2C client address, the read/write API is changed in below. reg_read(client, offset) reg_write(client, offset, data) The benefit is that client drivers only need one kind of read/write API. I2C and MFD driver can be shared in both 8606 and 8607. Since API is changed, update API in 8607 regulator driver. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-03-07mfd: Split 88pm8607 driverHaojian Zhuang
Create 88pm8607-i2c driver to support all I2C operation of 88PM8607. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-03-07mfd: Convert AB3100 driver to threaded IRQLinus Walleij
This converts the AB3100 core MFD driver to use a threaded interrupt handler instead of the explicit top/bottom-half construction with a workqueue. This saves some code and make it more similar to other modern MFD drivers. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-03-07gpiolib: Add support for WM8350 GPIO controllerMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-03-07mfd: Convert WM8350 to genirqMark Brown
This gives us use of the diagnostic facilities genirq provides and will allow implementation of interrupt support for the WM8350 GPIOs. Stub functions are provided to ease the transition of the individual drivers, probably after additional work to pass the IRQ numbers via the struct devices. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-03-07rtc: Suppress duplicate enable/disable of WM8350 update interruptMark Brown
Unlike the wm8350-custom code genirq nests enable and disable calls so we can't just unconditionally mask or unmask the interrupt, we need to remember the state we set and only mask or unmask when there is a real change. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Alessandro Zummo <a.zummo@towertech.it> Cc: rtc-linux@googlegroups.com Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-03-07mfd: Add a data argument to the WM8350 IRQ free functionMark Brown
To better match genirq. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-03-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/joern/logfsLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/joern/logfs: [LogFS] Change magic number [LogFS] Remove h_version field [LogFS] Check feature flags [LogFS] Only write journal if dirty [LogFS] Fix bdev erases [LogFS] Silence gcc [LogFS] Prevent 64bit divisions in hash_index [LogFS] Plug memory leak on error paths [LogFS] Add MAINTAINERS entry [LogFS] add new flash file system Fixed up trivial conflict in lib/Kconfig, and a semantic conflict in fs/logfs/inode.c introduced by write_inode() being changed to use writeback_control' by commit a9185b41a4f84971b930c519f0c63bd450c4810d ("pass writeback_control to ->write_inode")
2010-03-06PM: Provide generic subsystem-level callbacksRafael J. Wysocki
There are subsystems whose power management callbacks only need to invoke the callbacks provided by device drivers. Still, their system sleep PM callbacks should play well with the runtime PM callbacks, so that devices suspended at run time can be left in that state for a system sleep transition. Provide a set of generic PM callbacks for such subsystems and define convenience macros for populating dev_pm_ops structures. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2010-03-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-2.6-dmLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-2.6-dm: dm raid1: fix deadlock when suspending failed device dm: eliminate some holes data structures dm ioctl: introduce flag indicating uevent was generated dm: free dm_io before bio_endio not after dm table: remove unused dm_get_device range parameters dm ioctl: only issue uevent on resume if state changed dm raid1: always return error if all legs fail dm mpath: refactor pg_init dm mpath: wait for pg_init completion when suspending dm mpath: hold io until all pg_inits completed dm mpath: avoid storing private suspended state dm: document when snapshot has finished merging dm table: remove dm_get from dm_table_get_md dm mpath: skip activate_path for failed paths dm mpath: pass struct pgpath to pg init done
2010-03-06Merge branch 'for-2.6.34' of git://linux-nfs.org/~bfields/linuxLinus Torvalds
* 'for-2.6.34' of git://linux-nfs.org/~bfields/linux: (22 commits) nfsd4: fix minor memory leak svcrpc: treat uid's as unsigned nfsd: ensure sockets are closed on error Revert "sunrpc: move the close processing after do recvfrom method" Revert "sunrpc: fix peername failed on closed listener" sunrpc: remove unnecessary svc_xprt_put NFSD: NFSv4 callback client should use RPC_TASK_SOFTCONN xfs_export_operations.commit_metadata commit_metadata export operation replacing nfsd_sync_dir lockd: don't clear sm_monitored on nsm_reboot_lookup lockd: release reference to nsm_handle in nlm_host_rebooted nfsd: Use vfs_fsync_range() in nfsd_commit NFSD: Create PF_INET6 listener in write_ports SUNRPC: NFS kernel APIs shouldn't return ENOENT for "transport not found" SUNRPC: Bury "#ifdef IPV6" in svc_create_xprt() NFSD: Support AF_INET6 in svc_addsock() function SUNRPC: Use rpc_pton() in ip_map_parse() nfsd: 4.1 has an rfc number nfsd41: Create the recovery entry for the NFSv4.1 client nfsd: use vfs_fsync for non-directories ...
2010-03-06gpio: pca953x.c: add interrupt handling capabilityMarc Zyngier
Most of the GPIO expanders controlled by the pca953x driver are able to report changes on the input pins through an *INT pin. This patch implements the irq_chip functionality (edge detection only). The driver has been tested on an Arcom Zeus. [akpm@linux-foundation.org: the compiler does inlining for us nowadays] Signed-off-by: Marc Zyngier <maz@misterjones.org> Cc: Eric Miao <eric.y.miao@gmail.com> Cc: Haojian Zhuang <haojian.zhuang@gmail.com> Cc: David Brownell <david-b@pacbell.net> Cc: Nate Case <ncase@xes-inc.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-06gpio: introduce gpio_request_one() and friendsEric Miao
gpio_request() without initial configuration of the GPIO is normally useless, introduce gpio_request_one() together with GPIOF_ flags for input/output direction and initial output level. gpio_{request,free}_array() for multiple GPIOs. Signed-off-by: Eric Miao <eric.y.miao@gmail.com> Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: Ben Nizette <bn@niasdigital.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-06pca953x: minor include cleanupOlof Johansson
linux/i2c/pca953x.h is a very bare include file. Fix check for multiple includes of linux/i2c/pca953x.h, and add dependent includes into the header file. Signed-off-by: Olof Johansson <olof@lixom.net> Acked-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Jean Delvare <khali@linux-fr.org> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-06gpio: add driver for MAX7300 I2C GPIO extenderWolfram Sang
Add the MAX7300-I2C variant of the MAX7301-SPI version. Both chips share the same core logic, so the generic part of the in-kernel SPI-driver is refactored into a generic part. The I2C and SPI specific funtions are then wrapped into seperate drivers picking up the generic part. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Cc: Juergen Beisert <j.beisert@pengutronix.de> Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: Jean Delvare <khali@linux-fr.org> Cc: Anton Vorontsov <avorontsov@ru.mvista.com> Cc: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-06mfd/mc13783: new function reading irq mask and status registerUwe Kleine-König
The driver for the mc13783 rtc needs to know if the TODA irq is pending. Instead of tracking in the rtc driver if the irq is enabled provide that information, too. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Paul Gortmaker <p_gortmaker@yahoo.com> Cc: Valentin Longchamp <valentin.longchamp@epfl.ch> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Samuel Ortiz <sameo@linux.intel.com> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Luotao Fu <l.fu@pengutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-06mc13783: rename mc13783_{{un,}mask,ack_irq} to have a mc13783_irq prefixUwe Kleine-König
In the source file group these functions together. The mc13783 header file provides fallback implementations for the old names to prevent build failures. When all users of the old names are fixed to use the new names these can go away. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Paul Gortmaker <p_gortmaker@yahoo.com> Cc: Valentin Longchamp <valentin.longchamp@epfl.ch> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Samuel Ortiz <sameo@linux.intel.com> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Luotao Fu <l.fu@pengutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-06coredump: pass mm->flags as a coredump parameter for consistencyMasami Hiramatsu
Pass mm->flags as a coredump parameter for consistency. --- 1787 if (mm->core_state || !get_dumpable(mm)) { <- (1) 1788 up_write(&mm->mmap_sem); 1789 put_cred(cred); 1790 goto fail; 1791 } 1792 [...] 1798 if (get_dumpable(mm) == 2) { /* Setuid core dump mode */ <-(2) 1799 flag = O_EXCL; /* Stop rewrite attacks */ 1800 cred->fsuid = 0; /* Dump root private */ 1801 } --- Since dumpable bits are not protected by lock, there is a chance to change these bits between (1) and (2). To solve this issue, this patch copies mm->flags to coredump_params.mm_flags at the beginning of do_coredump() and uses it instead of get_dumpable() while dumping core. This copy is also passed to binfmt->core_dump, since elf*_core_dump() uses dump_filter bits in mm->flags. [akpm@linux-foundation.org: fix merge] Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Acked-by: Roland McGrath <roland@redhat.com> Cc: Hidehiro Kawai <hidehiro.kawai.ez@hitachi.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Ingo Molnar <mingo@elte.hu> Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-06elf coredump: add extended numbering supportDaisuke HATAYAMA
The current ELF dumper implementation can produce broken corefiles if program headers exceed 65535. This number is determined by the number of vmas which the process have. In particular, some extreme programs may use more than 65535 vmas. (If you google max_map_count, you can find some users facing this problem.) This kind of program never be able to generate correct coredumps. This patch implements ``extended numbering'' that uses sh_info field of the first section header instead of e_phnum field in order to represent upto 4294967295 vmas. This is supported by AMD64-ABI(http://www.x86-64.org/documentation.html) and Solaris(http://docs.sun.com/app/docs/doc/817-1984/). Of course, we are preparing patches for gdb and binutils. Signed-off-by: Daisuke HATAYAMA <d.hatayama@jp.fujitsu.com> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Jeff Dike <jdike@addtoit.com> Cc: David Howells <dhowells@redhat.com> Cc: Greg Ungerer <gerg@snapgear.com> Cc: Roland McGrath <roland@redhat.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Andi Kleen <andi@firstfloor.org> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: <linux-arch@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-06elf coredump: replace ELF_CORE_EXTRA_* macros by functionsDaisuke HATAYAMA
elf_core_dump() and elf_fdpic_core_dump() use #ifdef and the corresponding macro for hiding _multiline_ logics in functions. This patch removes #ifdef and replaces ELF_CORE_EXTRA_* by corresponding functions. For architectures not implemeonting ELF_CORE_EXTRA_*, we use weak functions in order to reduce a range of modification. This cleanup is for my next patches, but I think this cleanup itself is worth doing regardless of my firnal purpose. Signed-off-by: Daisuke HATAYAMA <d.hatayama@jp.fujitsu.com> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Jeff Dike <jdike@addtoit.com> Cc: David Howells <dhowells@redhat.com> Cc: Greg Ungerer <gerg@snapgear.com> Cc: Roland McGrath <roland@redhat.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Andi Kleen <andi@firstfloor.org> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: <linux-arch@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-06coredump: move dump_write() and dump_seek() into a header fileDaisuke HATAYAMA
My next patch will replace ELF_CORE_EXTRA_* macros by functions, putting them into other newly created *.c files. Then, each files will contain dump_write(), where each pair of binfmt_*.c and elfcore.c should be the same. So, this patch moves them into a header file with dump_seek(). Also, the patch deletes confusing DUMP_WRITE macros in each files. Signed-off-by: Daisuke HATAYAMA <d.hatayama@jp.fujitsu.com> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Jeff Dike <jdike@addtoit.com> Cc: David Howells <dhowells@redhat.com> Cc: Greg Ungerer <gerg@snapgear.com> Cc: Roland McGrath <roland@redhat.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Andi Kleen <andi@firstfloor.org> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: <linux-arch@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-06sdio: put active devices into 1-bit mode during suspendDaniel Drake
And bring them back to 4-bit mode during resume. Signed-off-by: Daniel Drake <dsd@laptop.org> Signed-off-by: Nicolas Pitre <nico@marvell.com> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-06sdio: introduce API for special power management featuresNicolas Pitre
This patch series provides the core changes needed to allow SDIO cards to remain powered and active while the host system is suspended, and let them wake up the host system when needed. This is used to implement wake-on-lan with SDIO wireless cards at the moment. Patches to add that support to the libertas driver will be posted separately. This patch: Some SDIO cards have the ability to keep on running autonomously when the host system is suspended, and wake it up when needed. This however requires that the host controller preserve power to the card, and configure itself appropriately for wake-up. There is however 4 layers of abstractions involved: the host controller driver, the MMC core code, the SDIO card management code, and the actual SDIO function driver. To make things simple and manageable, host drivers must advertise their PM capabilities with a feature bitmask, then function drivers can query and set those features from their suspend method. Then each layer in the suspend call chain is expected to act upon those bits accordingly. [akpm@linux-foundation.org: fix typo in comment] Signed-off-by: Nicolas Pitre <nico@marvell.com> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-06sdio: add quirk to clamp byte mode transferBing Zhao
Some SDIO cards expect byte transfers not to exceed the configured block transfer size. Add a quirk to that effect. Patches to make use of this quirk will be sent separately. Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: Nicolas Pitre <nico@marvell.com> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-06lib: fix first line of kernel-doc for a few functionsBen Hutchings
The function name must be followed by a space, hypen, space, and a short description. Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit v1.2.3 (git 2.0.4) at 2024-05-02 00:52:12 +0000