summaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)Author
2013-03-14Initial changes to support mcc and i2c semaphore for ping pong demoPD13.0.2Russell Robinson Jr
Signed-off-by: Russell Robinson Jr <rrobinson@phytec.com>
2012-12-12ENGR00181365-2: ADC: Add driver support for ADC VybridWang Xiaojun
Add driver support for ADC Vybrid. Signed-off-by: Wang Xiaojun <b41435@freescale.com>
2012-12-12ENGR00216087-1: ASRC support for VybridJingchang Lu
The ASRC driver supports stereo audio streams resample, the ASRCK1 serial clock using audio external clock source can not support 44.1K sample rate due to divider and prescaler restriction. Signed-off-by: Jingchang Lu <b35083@freescale.com>
2012-12-12ENGR00216076-2: DCU: Update DCU driver for PM and blending issueAlison Wang
Fix layers blending and reinitialization issue for DCU driver. Update power management part for DCU driver. Signed-off-by: Alison Wang <b18965@freescale.com>
2012-10-17ENGR00181395-1: Add UART MISC functions support for FaradayJingchang Lu
Add hardware flow control support, Add transmit DMA support, Add FIFO operation support, Add MSB/LSB on data support, Add 9-bits MARK/SPACE support. Signed-off-by: Jingchang Lu <b35083@freescale.com>
2012-09-12ENGR00181396-2: high-speed USB device disconnection managementJingchang Lu
Detection of high-speed USB device disconnection should be enable on connection and disable on disconnection. Signed-off-by: Jingchang Lu <b35083@freescale.com>
2012-09-12ENGR00212251-1: sai: add platform support for SAI driverAlison Wang
Add platform support for SAI driver. Signed-off-by: Alison Wang <b18965@freescale.com>
2012-03-07ENGR00176147-3: usb: change data types for wakeup_eventPeter Chen
In order to know which wakeup event occurs for usb wakeup Signed-off-by: Peter Chen <peter.chen@freescale.com>
2012-03-07ENGR00176061-2 usb: otg: add discharge vbus flagPeter Chen
Add discharge vbus flag Signed-off-by: Peter Chen <peter.chen@freescale.com>
2012-03-07ENGR00175864 [MMC]pipeline mmc requestsTony Lin
the patch is based on a series of patches by Per Forlin the patch is sdhci host side implementation. using a toshiba SDHC3.0 card, the performance increases from 48.5MB/s to 52.4MB/s. cmd: dd if=/dev/mmcblk0 of=/dev/null bs=1M count=500 the performance results running@1GHz, 200MHz CPU freq are: 52.4MB/s -> 20.7MB/s Signed-off-by: Tony Lin <tony.lin@freescale.com>
2012-03-06ENGR00170526-2 AUDIO: Remove struct field rst_gpio to audio platform dataLionel Xu
Remove rst_gpio field to mxc_audio_platform_data. Signed-off-by: Lionel Xu <Lionel.Xu@freescale.com>
2012-03-01mmc: queue: let host controllers specify maximum discard timeoutAdrian Hunter
Some host controllers will not operate without a hardware timeout that is limited in value. However large discards require large timeouts, so there needs to be a way to specify the maximum discard size. A host controller driver may now specify the maximum discard timeout possible so that max_discard_sectors can be calculated. However, for eMMC when the High Capacity Erase Group Size is not in use, the timeout calculation depends on clock rate which may change. For that case Preferred Erase Size is used instead. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-03-01mmc: block: allow get_card_status() to return error statusRussell King - ARM Linux
If the MMC_SEND_STATUS command is not successful, we should not return a zero status word, but instead allow the caller to know positively that an error occurred. Convert the open-coded get_card_status() to use the helper function, and provide definitions for the card state field. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Acked-by: Linus Walleij <linus.walleij@linaro.org> Tested-by: Pawel Moll <pawel.moll@arm.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-03-01mmc: core: add non-blocking mmc request functionPer Forlin
Previously there has only been one function mmc_wait_for_req() to start and wait for a request. This patch adds: * mmc_start_req() - starts a request wihtout waiting If there is on ongoing request wait for completion of that request and start the new one and return. Does not wait for the new command to complete. This patch also adds new function members in struct mmc_host_ops only called from core.c: * pre_req - asks the host driver to prepare for the next job * post_req - asks the host driver to clean up after a completed job The intention is to use pre_req() and post_req() to do cache maintenance while a request is active. pre_req() can be called while a request is active to minimize latency to start next job. post_req() can be used after the next job is started to clean up the request. This will minimize the host driver request end latency. post_req() is typically used before ending the block request and handing over the buffer to the block layer. Add a host-private member in mmc_data to be used by pre_req to mark the data. The host driver will then check this mark to see if the data is prepared or not. Signed-off-by: Per Forlin <per.forlin@linaro.org> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Venkatraman S <svenkatr@ti.com> Tested-by: Sourav Poddar <sourav.poddar@ti.com> Tested-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-02-28plist: Remove the need to supply locks to plist headsDima Zavin
This was legacy code brought over from the RT tree and is no longer necessary. Signed-off-by: Dima Zavin <dima@android.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Cc: Daniel Walker <dwalker@codeaurora.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Andi Kleen <andi@firstfloor.org> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Link: http://lkml.kernel.org/r/1310084879-10351-2-git-send-email-dima@android.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-23ENGR00175221-02 [MX6] MMCSD: clear EXE_TUNE bit after tuning finishes.Ryan QIAN
- add hook for post tuning in common code - add hook for post tuning for platform code to deal with clean up stuff on finishing tuning. Signed-off-by: Ryan QIAN <b32804@freescale.com>
2012-02-22ENGR00174734-3 usb: change function name for discharge data linePeter Chen
In order to reflect the function well, it needs to discharge both dp and dm, so change the function name. Signed-off-by: Peter Chen <peter.chen@freescale.com>
2012-02-21ENGR00171079-3 fsl_devices add generic audio codec platform dataAdrian Alonso
* Add generic audio codec platform_data to be able to pass specific settings to audio codecs found in Freescale target boards. * cs42888 get this platform data to override specific settings Signed-off-by: Adrian Alonso <aalonso@freescale.com>
2012-02-17ENGR00173964 make hdmi audio init dependent on hdmi video initAlan Tull
Don't show hdmi as an audio playback device if hdmi isn't configured on the command line. Signed-off-by: Alan Tull <r80115@freescale.com>
2012-02-17ENGR00174747 ASRC:fix spinlock bugChen Liangjun
When use clk_enable and clk_disable function, system may enter sleep. so these 2 funciton can not used surrounding with spin lock/unlock. And the clk_enable/disable function already keep the counter of open and close and it is no need to keep the counter in driver. Signed-off-by: Chen Liangjun <b36089@freescale.com>
2012-02-17ENGR00174732 ASRC:close core clock if ASRC idleChen Liangjun
Close ASRC core clock when ASRC device is not used. Open ASRC core clock when an ASRC device is open. Close ASRC core clock when an ASRC device is close. Signed-off-by: Chen Liangjun <b36089@freescale.com>
2012-02-15ENGR00174106-3 - EPDC fb: Support EPDC v2.0Danny Nold
- Added new register definitions for EPDCv2.0 - Added support for 64 LUTs - Conditionalized code for EPDC versions 1.0, 2.0, and 2.1 - Support for EPDC auto-waveform selection - Support for collision test mode - Support for PxP bypassing - Support for LUT cancellation - Support for new PxP limitations - Support for collision minimization EPDC feature - Added workaround for collision status bug (can't clear IRQ before reading collision status for LUTs 16-63) Signed-off-by: Danny Nold <dannynold@freescale.com>
2012-02-14ENGR00174299-1: driver part: Add ePxP v2 DMAENGINE driverRobby Cai
add ePxP v2 DMAENGINE driver Signed-off-by: Robby Cai <R63905@freescale.com>
2012-02-14ENGR00174121-1 power: max8903 add support for dcm always high.Zhang Jiejing
add this to support MX6Q_SABRESD board hardware design. Signed-off-by: Zhang Jiejing <jiejing.zhang@freescale.com>
2012-02-10ENGR00174128-3 Revert "Remove the discharge for VBUS and DP -3"Peter Chen
This reverts commit cc9616316bf044382ec422da5a6d4ed007235a3d. Signed-off-by: Peter Chen <peter.chen@freescale.com>
2012-02-09ENGR00174037-3 Add HSIC suspend/resume featureTony LIU
head file Signed-off-by: Tony LIU <junjie.liu@freescale.com>
2012-02-08ENGR00172342-2 EDID parse audio data blocksAlan Tull
Add functionality to parse Audio Data Blocks from EDID data to find out what modes of LPCM are suppored by the HDMI sink device. The parsed settings are saved in the hdmi mfd. The HDMI audio driver will check the settings when the audio stream is opened and will then apply appropriate constraints. If we are unable to read from the EDID, then we default to supporting Basic Audio as defined by the HDMI specification (stereo, 16 bit, 32KHz, 44.1KHz, 48KHz PCM). Signed-off-by: Alan Tull <r80115@freescale.com>
2012-02-08ENGR00173864 MX6Q ipu capture: add multi camera switchYuxi Sun
Add IOCTRL command V4L2_CID_MXC_SWITCH_CAM for multi camera switch Signed-off-by: Yuxi Sun <b36102@freescale.com>
2012-02-08ENGR00174038 [mx6 mmc]fix build errTony Lin
fix build error: incompatible pointer type Signed-off-by: Tony Lin <tony.lin@freescale.com>
2012-02-08ENGR00174031 [MX6Q] Support AR6003 SDIO wifi on kernel v3.0Ryan QIAN
- add macros and struct used in new ath6kl. Signed-off-by: Ryan QIAN <b32804@freescale.com>
2012-02-08ENGR00173947-1 mtd/gpmi : add BBT support to gpmi nand driverHuang Shijie
Add a new field to gpmi_nand_platform_data{}. Make the BBT support to board specific. Signed-off-by: Huang Shijie <b32955@freescale.com>
2012-02-07ENGR00173731-1 mxs-dma : rename the dma.h for mxs-dmaHuang Shijie
Move the header to a more common place. The mxs dma engine is not only used in mx23/mx28, but also used in mx50/mx6q. It will also be used in the future chips. rename it to mxs-dma.h Acked-by: Lily Zhang <r58066@freescale.com> Signed-off-by: Huang Shijie <b32955@freescale.com>
2012-02-06ENGR00173288-02 merge "[MX6Q]add SDHC3.0 support on uSDHC controller"Ryan QIAN
ENGR152547-03 [MX6Q]add SDHC3.0 support on uSDHC controller add voltage switch function due to SDHC3.0 spec requirement add tuning function due to SDHC3.0 spec requirement extend some functions to support SDR50 & SDR104 speed mode - adjust the sequence of current_limit and bus_speed_mode - add FSL specific tuning procedure Signed-off-by: Ryan QIAN <b32804@freescale.com>
2012-01-31ENGR00173397 MTD: add NAND_BBT_USE_FLASH macroHuang Shijie
add the new macro to fix a compiling error. Signed-off-by: Huang Shijie <b32955@freescale.com>
2012-01-31mtd: abstract last MTD partition parser argumentDmitry Eremin-Solenikov
Encapsulate last MTD partition parser argument into a separate structure. Currently it holds only 'origin' field for RedBoot parser, but will be extended in future to contain at least device_node for OF devices. Amended commentary to make kerneldoc happy Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: Artem Bityutskiy <dedekind1@gmail.com>
2012-01-31mtd: add new API for handling MTD registrationDmitry Eremin-Solenikov
Lots (nearly all) mtd drivers contain nearly the similar code that calls parse_mtd_partitions, provides some platform-default values, if parsing fails, and registers mtd device. This is an aim to provide single implementation of this scenario: mtd_device_parse_register() which will handle all this parsing and defaults. Artem: amended comments Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2012-01-31clk: add helper functions clk_prepare_enable and clk_disable_unprepareRichard Zhao
It's for migrating to generic clk framework API. The helper functions help cases clk_enable/clk_disable is used in non-atomic context. For example, Call clk_enable in probe and clk_disable in remove. Signed-off-by: Richard Zhao <richard.zhao@linaro.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Cc: Russell King <linux@arm.linux.org.uk> Acked-by: Marek Vasut <marek.vasut@gmail.com>
2012-01-31clk: provide prepare/unprepare functionsRussell King
As discussed previously, there's the need on some platforms to run some parts of clk_enable() in contexts which can schedule. The solution which was agreed upon was to provide clk_prepare() and clk_unprepare() to contain this parts, while clk_enable() and clk_disable() perform the atomic part. This patch provides a common definition for clk_prepare() and clk_unprepare() in linux/clk.h, and provides an upgrade path for existing implementation and drivers: drivers can start using clk_prepare() and clk_unprepare() once this patch is merged without having to wait for platform support. Platforms can then start to provide these additional functions. Eventually, HAVE_CLK_PREPARE will be removed from the kernel, and everyone will have to provide these new APIs. Acked-by: Saravana Kannan <skannan@codeaurora.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-31dmaengine: move drivers to dma_transfer_directionVinod Koul
fixup usage of dma direction by introducing dma_transfer_direction, this patch moves dma/drivers/* to use new enum Cc: Jassi Brar <jaswinder.singh@linaro.org> Cc: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Viresh Kumar <viresh.kumar@st.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Mika Westerberg <mika.westerberg@iki.fi> Cc: H Hartley Sweeten <hartleys@visionengravers.com> Cc: Li Yang <leoli@freescale.com> Cc: Zhang Wei <zw@zh-kernel.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Cc: Shawn Guo <shawn.guo@freescale.com> Cc: Yong Wang <yong.y.wang@intel.com> Cc: Tomoya MORINAGA <tomoya-linux@dsn.lapis-semi.com> Cc: Boojin Kim <boojin.kim@samsung.com> Cc: Barry Song <Baohua.Song@csr.com> Acked-by: Mika Westerberg <mika.westerberg@iki.fi> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Viresh Kumar <viresh.kumar@st.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-01-31dmaengine: add DMA_TRANS_NONE to dma_transfer_directionShawn Guo
Before dma_transfer_direction was introduced to replace dma_data_direction, some dmaengine device uses DMA_NONE of dma_data_direction for some talk with its client drivers. The mxs-dma and its clients mxs-mmc and gpmi-nand are such case. This patch adds DMA_TRANS_NONE to dma_transfer_direction and migrate the DMA_NONE use in mxs-dma to it. It also fixes the compile warning below. CC drivers/dma/mxs-dma.o drivers/dma/mxs-dma.c: In function ‘mxs_dma_prep_slave_sg’: drivers/dma/mxs-dma.c:420:16: warning: comparison between ‘enum dma_transfer_direction’ and ‘enum dma_data_direction’ Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-01-31linux/dmaengine.h: fix implicit use of bitmap.h and asm/page.hPaul Gortmaker
The implicit presence of module.h and all its sub-includes was masking these implicit header usages: include/linux/dmaengine.h:684: warning: 'struct page' declared inside parameter list include/linux/dmaengine.h:684: warning: its scope is only this definition or declaration, which is probably not what you want include/linux/dmaengine.h:687: warning: 'struct page' declared inside parameter list include/linux/dmaengine.h:736:2: error: implicit declaration of function 'bitmap_zero' With input from Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-01-31dmaengine: add new enum dma_transfer_directionVinod Koul
This new enum removes usage of dma_data_direction for dma direction. The new enum cleans tells the DMA direction and mode This further paves way for merging the dmaengine _prep operations and also for interleaved dma Suggested-by: Jassi Brar <jaswinder.singh@linaro.org> Reviewed-by: Barry Song <Baohua.Song@csr.com> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-01-31dmaengine: remove struct scatterlist for headerVinod Koul
Commit 90b44f8 introduces dmaengine_prep_slave_single API which adds scatterlist.h in dmaengine.h, so defining struct scatterlist is not required Signed-off-by: Vinod Koul <vinod.koul@intel.com> Acked-by: Dan Williams <dan.j.williams@intel.com>
2012-01-31dmaengine: add helper function for slave_singleVinod Koul
For clients which require a single slave transfer and dont want to be bothered about the scatterlist api, this helper gives simple API for this transfer and creates single scatterlist for DMA API Idea from Russell King Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2012-01-31net: remove mm.h inclusion from netdevice.hAlexey Dobriyan
Remove linux/mm.h inclusion from netdevice.h -- it's unused (I've checked manually). To prevent mm.h inclusion via other channels also extract "enum dma_data_direction" definition into separate header. This tiny piece is what gluing netdevice.h with mm.h via "netdevice.h => dmaengine.h => dma-mapping.h => scatterlist.h => mm.h". Removal of mm.h from scatterlist.h was tried and was found not feasible on most archs, so the link was cutoff earlier. Hope people are OK with tiny include file. Note, that mm_types.h is still dragged in, but it is a separate story. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-31ENGR00173284 merge "eMMC: Configure boot_partition_enable"Ryan QIAN
ENGR126228 eMMC: Configure boot_partition_enable Enable the configurations of the boot enable on the eMMC cards. Add the interface that used to configure the boot_bus_width In order to make sure that the re-read the ext-csd of card can be completed successfully, add the method to wait for the finish of the busy state. NOTE: The following are the valid inputs when configure the boot bus width of the eMMC cards. +--------------------------------------------------------------------+ | Bit7 Bit6 Bit5 | Bit4 Bit3 | Bit2 | Bit1 Bit0 | |----------------|----------------------------------|----------------| | X | BOOT_MODE | RESET_BOOT_BUS_WIDTH | BOOT_BUS_WIDTH | +--------------------------------------------------------------------+ Bit [4:3] : BOOT_MODE (non-volatile) 0x0 : Use single data rate + backward compatible timings in boot operation (default) 0x1 : Use single data rate + high speed timings in boot operation mode 0x2 : Use dual data rate in boot operation 0x3 : Reserved Bit [2]: RESET_BOOT_BUS_WIDTH (non-volatile) 0x0 : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default) 0x1 : Retain boot bus width and boot mode after boot operation Bit[1:0] : BOOT_BUS_WIDTH (non-volatile) 0x0 : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default) 0x1 : x4 (sdr/ddr) bus width in boot operation mode 0x2 : x8 (sdr/ddr) bus width in boot operation mode 0x3 : Reserved The following are the valid inputs when configure the boot partitions of the eMMC cards. +------------------------------------------------------------+ | Bit7 | Bit6 | Bit5 Bit4 Bit3 | Bit2 Bit1 Bit0 | |------|----------|-----------------------|------------------| | X | BOOT_ACK | BOOT_PARTITION_ENABLE | PARTITION_ACCESS | +------------------------------------------------------------+ Bit7: Reserved Bit6: always set to vaule '1' when boot_part is enabled Bit[5:3]: 0x0 : Device not boot enabled (default) 0x1 : Boot partition 1 enabled for boot 0x2 : Boot partition 2 enabled for boot 0x7 : User area enabled for boot Bit[2:0]: 0x0 : No access to boot partition (default) 0x1 : R/W boot partition 1 0x2 : R/W boot partition 2 So only the '0, 1, 2; 8, 9, 10; 16, 17, 18; 56, 57, 58' are valid parameters when configure the boot_partiton. Signed-off-by: Richard Zhu <r65037@freescale.com> Signed-off-by: Ryan QIAN <b32804@freescale.com>
2012-01-31ENGR00173283 merge "eMMC: Boot Partition switch func used in MFG tool"Ryan QIAN
ENGR125411 eMMC: Boot Partition switch func used in MFG tool User can get eMMC partitions info from user space layer in linux OS enviroment. User can do switch operations between the eMMC boot partitions and the user partition. User can access the eMMC boot partitions from user space layer in linux OS enviroment. NOTE:This func had been verified on TOSHIBA eMMC44 card only. Signed-off-by: Richard Zhu <r65037@freescale.com> Signed-off-by: Rob Herring <r.herring@freescale.com> Signed-off-by: Ryan QIAN <b32804@freescale.com>
2012-01-31mtd: fix compile error for gpmi-nandHuang Shijie
The driver gpmi-nand should compile at least. This patch adds the missing gpmi-nand.h to fix the compile error below. CC drivers/mtd/nand/gpmi-nand/gpmi-nand.o CC drivers/mtd/nand/gpmi-nand/gpmi-lib.o drivers/mtd/nand/gpmi-nand/gpmi-nand.c:25:33: fatal error: linux/mtd/gpmi-nand.h: No such file or directory drivers/mtd/nand/gpmi-nand/gpmi-lib.c:21:33: fatal error: linux/mtd/gpmi-nand.h: No such file or directory This header is grabbed from patch below, which has not been postponed for merging. [PATCH v8 1/4] ARM: mxs: add GPMI-NAND support for imx23/imx28 http://permalink.gmane.org/gmane.linux.drivers.mtd/37338 Signed-off-by: Huang Shijie <b32955@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-01-25ENGR00172752-2 Remove usless code in pfuze100 regulator driverNancy Chen
Remove usless code in pfuze100 regulator driver Signed-off-by: Robin Gong <b38343@freescale.com> Signed-off-by: Nancy Chen <Nancy.Chen@freescale.com>
2012-01-19ENGR00171564-1 MX6Q ARM2: Enable TVin based on AUTO BoardEven Xu
Add TVin struct to Head file. Signed-off-by: Even Xu <b21019@freescale.com>