summaryrefslogtreecommitdiff
path: root/kernel/futex.c
AgeCommit message (Collapse)Author
2009-12-14rtmutes: Convert rtmutex.lock to raw_spinlockThomas Gleixner
Convert locks which cannot be sleeping locks in preempt-rt to raw_spinlocks. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Peter Zijlstra <peterz@infradead.org> Acked-by: Ingo Molnar <mingo@elte.hu>
2009-12-14sched: Convert pi_lock to raw_spinlockThomas Gleixner
Convert locks which cannot be sleeping locks in preempt-rt to raw_spinlocks. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Peter Zijlstra <peterz@infradead.org> Acked-by: Ingo Molnar <mingo@elte.hu>
2009-12-14plist: Make plist debugging raw_spinlock awareThomas Gleixner
plists are used with spinlocks and raw_spinlocks. Change the plist debugging to handle both types. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Peter Zijlstra <peterz@infradead.org> Acked-by: Ingo Molnar <mingo@elte.hu>
2009-12-08futex: Take mmap_sem for get_user_pages in fault_in_user_writeableAndi Kleen
get_user_pages() must be called with mmap_sem held. Signed-off-by: Andi Kleen <ak@linux.intel.com> Cc: stable@kernel.org Cc: Andrew Morton <akpm@linuxfoundation.org> Cc: Nick Piggin <npiggin@suse.de> Cc: Darren Hart <dvhltc@us.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> LKML-Reference: <20091208121942.GA21298@basil.fritz.box> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2009-10-28futex: Fix spurious wakeup for requeue_pi reallyThomas Gleixner
The requeue_pi path doesn't use unqueue_me() (and the racy lock_ptr == NULL test) nor does it use the wake_list of futex_wake() which where the reason for commit 41890f2 (futex: Handle spurious wake up) See debugging discussing on LKML Message-ID: <4AD4080C.20703@us.ibm.com> The changes in this fix to the wait_requeue_pi path were considered to be a likely unecessary, but harmless safety net. But it turns out that due to the fact that for unknown $@#!*( reasons EWOULDBLOCK is defined as EAGAIN we built an endless loop in the code path which returns correctly EWOULDBLOCK. Spurious wakeups in wait_requeue_pi code path are unlikely so we do the easy solution and return EWOULDBLOCK^WEAGAIN to user space and let it deal with the spurious wakeup. Cc: Darren Hart <dvhltc@us.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: John Stultz <johnstul@linux.vnet.ibm.com> Cc: Dinakar Guniguntala <dino@in.ibm.com> LKML-Reference: <4AE23C74.1090502@us.ibm.com> Cc: stable@kernel.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2009-10-16futex: Move drop_futex_key_refs out of spinlock'ed regionDarren Hart
When requeuing tasks from one futex to another, the reference held by the requeued task to the original futex location needs to be dropped eventually. Dropping the reference may ultimately lead to a call to "iput_final" and subsequently call into filesystem- specific code - which may be non-atomic. It is therefore safer to defer this drop operation until after the futex_hash_bucket spinlock has been dropped. Originally-From: Helge Bahmann <hcb@chaoticmind.net> Signed-off-by: Darren Hart <dvhltc@us.ibm.com> Cc: <stable@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Dinakar Guniguntala <dino@in.ibm.com> Cc: John Stultz <johnstul@linux.vnet.ibm.com> Cc: Sven-Thorsten Dietrich <sdietrich@novell.com> Cc: John Kacur <jkacur@redhat.com> LKML-Reference: <4AD7A298.5040802@us.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-14futex: Check for NULL keys in match_futexDarren Hart
If userspace tries to perform a requeue_pi on a non-requeue_pi waiter, it will find the futex_q->requeue_pi_key to be NULL and OOPS. Check for NULL in match_futex() instead of doing explicit NULL pointer checks on all call sites. While match_futex(NULL, NULL) returning false is a little odd, it's still correct as we expect valid key references. Signed-off-by: Darren Hart <dvhltc@us.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ingo Molnar <mingo@elte.hu> CC: Eric Dumazet <eric.dumazet@gmail.com> CC: Dinakar Guniguntala <dino@in.ibm.com> CC: John Stultz <johnstul@us.ibm.com> Cc: stable@kernel.org LKML-Reference: <4AD60687.10306@us.ibm.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2009-10-13futex: Handle spurious wake upThomas Gleixner
The futex code does not handle spurious wake up in futex_wait and futex_wait_requeue_pi. The code assumes that any wake up which was not caused by futex_wake / requeue or by a timeout was caused by a signal wake up and returns one of the syscall restart error codes. In case of a spurious wake up the signal delivery code which deals with the restart error codes is not invoked and we return that error code to user space. That causes applications which actually check the return codes to fail. Blaise reported that on preempt-rt a python test program run into a exception trap. -rt exposed that due to a built in spurious wake up accelerator :) Solve this by checking signal_pending(current) in the wake up path and handle the spurious wake up case w/o returning to user space. Reported-by: Blaise Gassend <blaise@willowgarage.com> Debugged-by: Darren Hart <dvhltc@us.ibm.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: stable@kernel.org LKML-Reference: <new-submission>
2009-10-08Merge branch 'core-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: futex: fix requeue_pi key imbalance futex: Fix typo in FUTEX_WAIT/WAKE_BITSET_PRIVATE definitions rcu: Place root rcu_node structure in separate lockdep class rcu: Make hot-unplugged CPU relinquish its own RCU callbacks rcu: Move rcu_barrier() to rcutree futex: Move exit_pi_state() call to release_mm() futex: Nullify robust lists after cleanup futex: Fix locking imbalance panic: Fix panic message visibility by calling bust_spinlocks(0) before dying rcu: Replace the rcu_barrier enum with pointer to call_rcu*() function rcu: Clean up code based on review feedback from Josh Triplett, part 4 rcu: Clean up code based on review feedback from Josh Triplett, part 3 rcu: Fix rcu_lock_map build failure on CONFIG_PROVE_LOCKING=y rcu: Clean up code to address Ingo's checkpatch feedback rcu: Clean up code based on review feedback from Josh Triplett, part 2 rcu: Clean up code based on review feedback from Josh Triplett
2009-10-07futex: fix requeue_pi key imbalanceDarren Hart
If futex_wait_requeue_pi() wakes prior to requeue, we drop the reference to the source futex_key twice, once in handle_early_requeue_pi_wakeup() and once on our way out. Remove the drop from the handle_early_requeue_pi_wakeup() and keep the get/drops together in futex_wait_requeue_pi(). Reported-by: Helge Bahmann <hcb@chaoticmind.net> Signed-off-by: Darren Hart <dvhltc@us.ibm.com> Cc: Helge Bahmann <hcb@chaoticmind.net> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Dinakar Guniguntala <dino@in.ibm.com> Cc: John Stultz <johnstul@us.ibm.com> Cc: stable-2.6.31 <stable@kernel.org> LKML-Reference: <4ACCE21E.5030805@us.ibm.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2009-10-05futex: Fix locking imbalanceThomas Gleixner
Rich reported a lock imbalance in the futex code: http://bugzilla.kernel.org/show_bug.cgi?id=14288 It's caused by the displacement of the retry_private label in futex_wake_op(). The code unlocks the hash bucket locks in the error handling path and retries without locking them again which makes the next unlock fail. Move retry_private so we lock the hash bucket locks when we retry. Reported-by: Rich Ercolany <rercola@acm.jhu.edu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Darren Hart <dvhltc@us.ibm.com> Cc: stable-2.6.31 <stable@kernel.org> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-24futex: Add memory barrier commentary to futex_wait_queue_me()Darren Hart
The memory barrier semantics of futex_wait_queue_me() are non-obvious. Add some commentary to try and clarify it. Signed-off-by: Darren Hart <dvhltc@us.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Dinakar Guniguntala <dino@in.ibm.com> Cc: John Stultz <johnstul@us.ibm.com> LKML-Reference: <20090924185447.694.38948.stgit@Aeon> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-22futex: Fix wakeup race by setting TASK_INTERRUPTIBLE before queue_me()Darren Hart
PI futexes do not use the same plist_node_empty() test for wakeup. It was possible for the waiter (in futex_wait_requeue_pi()) to set TASK_INTERRUPTIBLE after the waker assigned the rtmutex to the waiter. The waiter would then note the plist was not empty and call schedule(). The task would not be found by any subsequeuent futex wakeups, resulting in a userspace hang. By moving the setting of TASK_INTERRUPTIBLE to before the call to queue_me(), the race with the waker is eliminated. Since we no longer call get_user() from within queue_me(), there is no need to delay the setting of TASK_INTERRUPTIBLE until after the call to queue_me(). The FUTEX_LOCK_PI operation is not affected as futex_lock_pi() relies entirely on the rtmutex code to handle schedule() and wakeup. The requeue PI code is affected because the waiter starts as a non-PI waiter and is woken on a PI futex. Remove the crusty old comment about holding spinlocks() across get_user() as we no longer do that. Correct the locking statement with a description of why the test is performed. Signed-off-by: Darren Hart <dvhltc@us.ibm.com> Acked-by: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Dinakar Guniguntala <dino@in.ibm.com> Cc: John Stultz <johnstul@us.ibm.com> LKML-Reference: <20090922053038.8717.97838.stgit@Aeon> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-22futex: Correct futex_q woken state commentaryDarren Hart
Use kernel-doc format to describe struct futex_q. Correct the wakeup definition to eliminate the statement about waking the waiter between the plist_del() and the q->lock_ptr = 0. Note in the comment that PI futexes have a different definition of the woken state. Signed-off-by: Darren Hart <dvhltc@us.ibm.com> Acked-by: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Dinakar Guniguntala <dino@in.ibm.com> Cc: John Stultz <johnstul@us.ibm.com> LKML-Reference: <20090922053029.8717.62798.stgit@Aeon> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-22futex: Make function kernel-doc commentary consistentDarren Hart
Make the existing function kernel-doc consistent throughout futex.c, following Documentation/kernel-doc-nano-howto.txt as closely as possible. When unsure, at least be consistent within futex.c. Signed-off-by: Darren Hart <dvhltc@us.ibm.com> Acked-by: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Dinakar Guniguntala <dino@in.ibm.com> Cc: John Stultz <johnstul@us.ibm.com> LKML-Reference: <20090922053022.8717.13339.stgit@Aeon> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-22futex: Correct queue_me and unqueue_me commentaryDarren Hart
The queue_me/unqueue_me commentary is oddly placed and out of date. Clean it up and correct the inaccurate bits. Signed-off-by: Darren Hart <dvhltc@us.ibm.com> Acked-by: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Dinakar Guniguntala <dino@in.ibm.com> Cc: John Stultz <johnstul@us.ibm.com> LKML-Reference: <20090922053015.8717.71713.stgit@Aeon> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-22futex: Correct futex_wait_requeue_pi() commentaryDarren Hart
Correct various typos and formatting inconsistencies in the commentary of futex_wait_requeue_pi(). Signed-off-by: Darren Hart <dvhltc@us.ibm.com> Acked-by: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Dinakar Guniguntala <dino@in.ibm.com> Cc: John Stultz <johnstul@us.ibm.com> LKML-Reference: <20090922052958.8717.21932.stgit@Aeon> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-11Merge branch 'core-futexes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'core-futexes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: futex: Detect mismatched requeue targets futex: Correct futex_wait_requeue_pi() commentary
2009-08-16futex: Detect mismatched requeue targetsDarren Hart
There is currently no check to ensure that userspace uses the same futex requeue target (uaddr2) in futex_requeue() that the waiter used in futex_wait_requeue_pi(). A mismatch here could very unexpected results as the waiter assumes it either wakes on uaddr1 or uaddr2. We could detect this on wakeup in the waiter, but the cleanup is more intense after the improper requeue has occured. This patch stores the waiter's expected requeue target in a new requeue_pi_key pointer in the futex_q which futex_requeue() checks prior to attempting to do a proxy lock acquistion or a requeue when requeue_pi=1. If they don't match, return -EINVAL from futex_requeue, aborting the requeue of any remaining waiters. Signed-off-by: Darren Hart <dvhltc@us.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: John Kacur <jkacur@redhat.com> Cc: Dinakar Guniguntala <dino@in.ibm.com> Cc: John Stultz <johnstul@us.ibm.com> LKML-Reference: <20090814003650.14634.63916.stgit@Aeon> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2009-08-10futex: Fix handling of bad requeue syscall pairingDarren Hart
If futex_requeue(requeue_pi=1) finds a futex_q that was created by a call other the futex_wait_requeue_pi(), the q.rt_waiter may be null. If so, this will result in an oops from the following call graph: futex_requeue() rt_mutex_start_proxy_lock() task_blocks_on_rt_mutex() waiter->task dereference OOPS We currently WARN_ON() if this is detected, clearly this is inadequate. If we detect a mispairing in futex_requeue(), bail out, seding -EINVAL to user-space. V2: Fix parenthesis warnings. Signed-off-by: Darren Hart <dvhltc@us.ibm.com> Acked-by: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: John Kacur <jkacur@redhat.com> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Dinakar Guniguntala <dino@in.ibm.com> Cc: John Stultz <johnstul@linux.vnet.ibm.com> LKML-Reference: <4A7CA8C0.7010809@us.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-10futex: Update futex_q lock_ptr on requeue proxy lockDarren Hart
futex_requeue() can acquire the lock on behalf of a waiter early on or during the requeue loop if it is uncontended or in the event of a lock steal or owner died. On wakeup, the waiter (in futex_wait_requeue_pi()) cleans up the pi_state owner using the lock_ptr to protect against concurrent access to the pi_state. The pi_state is hung off futex_q's on the requeue target futex hash bucket so the lock_ptr needs to be updated accordingly. The problem manifested by triggering the WARN_ON in lookup_pi_state() about the pid != pi_state->owner->pid. With this patch, the pi_state is properly guarded against concurrent access via the requeue target hb lock. The astute reviewer may notice that there is a window of time between when futex_requeue() unlocks the hb locks and when futex_wait_requeue_pi() will acquire hb2->lock. During this time the pi_state and uval are not in sync with the underlying rtmutex owner (but the uval does indicate there are waiters, so no atomic changes will occur in userspace). However, this is not a problem. Should a contending thread enter lookup_pi_state() and acquire hb2->lock before the ownership is fixed up, it will find the pi_state hung off a waiter's (possibly the pending owner's) futex_q and block on the rtmutex. Once futex_wait_requeue_pi() fixes up the owner, it will also move the pi_state from the old owner's task->pi_state_list to its own. v3: Fix plist lock name for application to mainline (rather than -rt) Compile tested against tip/v2.6.31-rc5. Signed-off-by: Darren Hart <dvhltc@us.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Dinakar Guniguntala <dino@in.ibm.com> Cc: John Stultz <johnstul@linux.vnet.ibm.com> LKML-Reference: <4A7F4EFF.6090903@us.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-04futex: Correct futex_wait_requeue_pi() commentaryDarren Hart
The state machine described in the comments wasn't updated with a follow-on fix. Address that and cleanup the corresponding commentary in the function. Signed-off-by: Darren Hart <dvhltc@us.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> LKML-Reference: <4A737C2A.9090001@us.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-11futexes: Fix infinite loop in get_futex_key() on huge pageSonny Rao
get_futex_key() can infinitely loop if it is called on a virtual address that is within a huge page but not aligned to the beginning of that page. The call to get_user_pages_fast will return the struct page for a sub-page within the huge page and the check for page->mapping will always fail. The fix is to call compound_head on the page before checking that it's mapped. Signed-off-by: Sonny Rao <sonnyrao@us.ibm.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Cc: stable@kernel.org Cc: anton@samba.org Cc: rajamony@us.ibm.com Cc: speight@us.ibm.com Cc: mstephen@us.ibm.com Cc: grimm@us.ibm.com Cc: mikey@ozlabs.au.ibm.com LKML-Reference: <20090710231313.GA23572@us.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-25futex: request only one page from get_user_pages()Thomas Gleixner
Yanmin noticed that fault_in_user_writeable() requests 4 pages instead of one. That's the result of blindly trusting Linus' proposal :) I even looked up the prototype to verify the correctness: the argument in question is confusingly enough named "len" while in reality it means number of pages. Pointed-out-by: Yanmin Zhang <yanmin_zhang@linux.intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2009-06-24futex: Fix the write access fault problem for realThomas Gleixner
commit 64d1304a64 (futex: setup writeable mapping for futex ops which modify user space data) did address only half of the problem of write access faults. The patch was made on two wrong assumptions: 1) access_ok(VERIFY_WRITE,...) would actually check write access. On x86 it does _NOT_. It's a pure address range check. 2) a RW mapped region can not go away under us. That's wrong as well. Nobody can prevent another thread to call mprotect(PROT_READ) on that region where the futex resides. If that call hits between the get_user_pages_fast() verification and the actual write access in the atomic region we are toast again. The solution is to not rely on access_ok and get_user() for any write access related fault on private and shared futexes. Instead we need to fault it in with verification of write access. There is no generic non destructive write mechanism which would fault the user page in trough a #PF, but as we already know that we will fault we can as well call get_user_pages() directly and avoid the #PF overhead. If get_user_pages() returns -EFAULT we know that we can not fix it anymore and need to bail out to user space. Remove a bunch of confusing comments on this issue as well. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: stable@kernel.org
2009-05-20futex: fix restart in wait_requeue_piThomas Gleixner
If the waiter has been requeued to the outer PI futex and is interrupted by a signal and the thread handles the signal then ERESTART_RESTARTBLOCK is changed to EINTR and the restart block is discarded. That way we return an unexcpected EINTR to user space instead of ending up in futex_lock_pi_restart. But we do not need to restart the syscall because we know that the condition has changed since we have been requeued. If we would simply restart the syscall then we would drop out via the comparison of the user space value with EWOULDBLOCK. The user space side needs to handle EWOULDBLOCK anyway as the enqueueing on the inner futex can race with a requeue/wake. So we can simply return EWOULDBLOCK to user space which also signals that we did not take the outer futex and let user space handle it in the same way it has to handle the requeue/wake race. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2009-05-20futex: fix restart for early wakeup in futex_wait_requeue_pi()Thomas Gleixner
The futex_wait_requeue_pi op should restart unconditionally like futex_lock_pi. The user of that function e.g. pthread_cond_wait can not be interrupted so we do not care about the SA_RESTART flag of the signal. Clean up the FIXMEs. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2009-05-20futex: cleanup error exitThomas Gleixner
Reuse the put_key_ref(key2) call in the exit path. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2009-05-20Merge branch 'core/urgent' into core/futexesThomas Gleixner
Merge reason: this branch was on an pre -rc1 base, merge it up to -rc6+ to get the latest upstream fixes. Conflicts: kernel/futex.c Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2009-05-19futex: setup writeable mapping for futex ops which modify user space dataThomas Gleixner
The futex code installs a read only mapping via get_user_pages_fast() even if the futex op function has to modify user space data. The eventual fault was fixed up by futex_handle_fault() which walked the VMA with mmap_sem held. After the cleanup patches which removed the mmap_sem dependency of the futex code commit 4dc5b7a36a49eff97050894cf1b3a9a02523717 (futex: clean up fault logic) removed the private VMA walk logic from the futex code. This change results in a stale RO mapping which is not fixed up. Instead of reintroducing the previous fault logic we set up the mapping in get_user_pages_fast() read/write for all operations which modify user space data. Also handle private futexes in the same way and make the current unconditional access_ok(VERIFY_WRITE) depend on the futex op. Reported-by: Andreas Schwab <schwab@linux-m68k.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> CC: stable@kernel.org
2009-05-15futex: remove the wait queueThomas Gleixner
The waitqueue which is used in struct futex_q is a leftover from the futexfd implementation. There is no need to use a waitqueue at all, as the waiting task is the only user of it. The waitqueue just adds additional locking and a loop in the wake up path which both can be avoided. We have already a task reference in struct futex_q which is used for PI futexes. Use it for normal futexes as well and just wake up the task directly. The logic of signalling the futex wakeup via setting q->lock_ptr to NULL is kept with the difference that we set it NULL before doing the wakeup. This opens an exit race window vs. a non futex wake up of the to be woken up task, which we prevent with get_task_struct / put_task_struct on the waiter. [ Impact: simplification ] Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2009-04-30futex: remove FUTEX_REQUEUE_PI (non CMP)Darren Hart
The new requeue PI futex op codes were modeled after the existing FUTEX_REQUEUE and FUTEX_CMP_REQUEUE calls. I was unaware at the time that FUTEX_REQUEUE was only around for compatibility reasons and shouldn't be used in new code. Ulrich Drepper elaborates on this in his Futexes are Tricky paper: http://people.redhat.com/drepper/futex.pdf. The deprecated call doesn't catch changes to the futex corresponding to the destination futex which can lead to deadlock. Therefor, I feel it best to remove FUTEX_REQUEUE_PI and leave only FUTEX_CMP_REQUEUE_PI as there are not yet any existing users of the API. This patch does change the OP code value of FUTEX_CMP_REQUEUE_PI to 12 from 13. Since my test case is the only known user of this API, I felt this was the right thing to do, rather than leave a hole in the enumeration. I chose to continue using the _CMP_ modifier in the OP code to make it explicit to the user that the test is being done. Builds, boots, and ran several hundred iterations requeue_pi.c. Signed-off-by: Darren Hart <dvhltc@us.ibm.com> LKML-Reference: <49ED580E.1050502@us.ibm.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2009-04-10futex: fix futex_wait_setup key handlingDarren Hart
If the get_futex_key() call were to fail, the existing code would try and put_futex_key() prior to returning. This patch makes sure we only put_futex_key() if get_futex_key() succeeded. Reported-by: Clark Williams <williams@redhat.com> Signed-off-by: Darren Hart <dvhltc@us.ibm.com> LKML-Reference: <20090410165005.14342.16973.stgit@Aeon> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2009-04-08futex: fixup unlocked requeue pi caseDarren Hart
Thomas's testing caught a problem when the requeue target futex is unowned and multiple tasks are requeued to it. This patch ensures the FUTEX_WAITERS bit gets set if futex_requeue() will requeue one or more tasks in addition to the one acquiring the lock. Signed-off-by: Darren Hart <dvhltc@us.ibm.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2009-04-06futex: add requeue_pi functionalityDarren Hart
PI Futexes and their underlying rt_mutex cannot be left ownerless if there are pending waiters as this will break the PI boosting logic, so the standard requeue commands aren't sufficient. The new commands properly manage pi futex ownership by ensuring a futex with waiters has an owner at all times. This will allow glibc to properly handle pi mutexes with pthread_condvars. The approach taken here is to create two new futex op codes: FUTEX_WAIT_REQUEUE_PI: Tasks will use this op code to wait on a futex (such as a non-pi waitqueue) and wake after they have been requeued to a pi futex. Prior to returning to userspace, they will acquire this pi futex (and the underlying rt_mutex). futex_wait_requeue_pi() is the result of a high speed collision between futex_wait() and futex_lock_pi() (with the first part of futex_lock_pi() being done by futex_proxy_trylock_atomic() on behalf of the top_waiter). FUTEX_REQUEUE_PI (and FUTEX_CMP_REQUEUE_PI): This call must be used to wake tasks waiting with FUTEX_WAIT_REQUEUE_PI, regardless of how many tasks the caller intends to wake or requeue. pthread_cond_broadcast() should call this with nr_wake=1 and nr_requeue=INT_MAX. pthread_cond_signal() should call this with nr_wake=1 and nr_requeue=0. The reason being we need both callers to get the benefit of the futex_proxy_trylock_atomic() routine. futex_requeue() also enqueues the top_waiter on the rt_mutex via rt_mutex_start_proxy_lock(). Signed-off-by: Darren Hart <dvhltc@us.ibm.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2009-04-06futex: split out futex value validation codeDarren Hart
Refactor the code to validate the expected futex value in order to reuse it with the requeue_pi code. Signed-off-by: Darren Hart <dvhltc@us.ibm.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2009-04-06futex: distangle futex_requeue()Darren Hart
futex_requeue() is getting a bit long-winded, and will be getting more so after the requeue_pi patch. Factor out the actual requeueing into a nicely contained inline function to reduce function length and improve legibility. Signed-off-by: Darren Hart <dvhltc@us.ibm.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2009-04-06futex: add FUTEX_HAS_TIMEOUT flag to restart.futex.flagsDarren Hart
Currently restart is only used if there is a timeout. The requeue_pi functionality requires restarting to futex_lock_pi() on signal after wakeup in futex_wait_requeue_pi() regardless of if there was a timeout or not. Using 0 for the timeout value is confusing as that could indicate an expired timer. The flag makes this explicit. While the check is not technically needed in futex_wait_restart(), doing so makes the code consistent with and will avoid confusion should the need arise to restart wait without a timeout. Signed-off-by: Darren Hart <dvhltc@us.ibm.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2009-04-06futex: split out fixup owner logic from futex_lock_pi()Darren Hart
Refactor the post lock acquisition logic from futex_lock_pi(). This code will be reused in futex_wait_requeue_pi(). Signed-off-by: Darren Hart <dvhltc@us.ibm.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2009-04-06futex: split out atomic logic from futex_lock_pi()Darren Hart
Refactor the atomic portion of futex_lock_pi() into futex_lock_pi_atomic(). This logic will be needed by requeue_pi, so modularize it to reduce code duplication. The only significant change is passing of the task to try and take the lock for. This simplifies the -EDEADLK test as if the lock is owned by task t, it's a deadlock, regardless of if we are doing requeue pi or not. This patch updates the corresponding comment accordingly. Signed-off-by: Darren Hart <dvhltc@us.ibm.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2009-04-06futex: add helper to find the top prio waiter of a futexDarren Hart
Improve legibility by wrapping finding the top waiter in a function. This will be used by the follow-on patches for enabling requeue pi. Signed-off-by: Darren Hart <dvhltc@us.ibm.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2009-04-06futex: separate futex_wait_queue_me() logic from futex_wait()Darren Hart
Refactor futex_wait() in preparation for futex_wait_requeue_pi(). In order to reuse a good chunk of the futex_wait() code for the upcoming futex_wait_requeue_pi() function, this patch breaks out the queue-to-wakeup section of futex_wait() into futex_wait_queue_me(). Signed-off-by: Darren Hart <dvhltc@us.ibm.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2009-04-02futex: comment requeue key reference semanticsDarren Hart
We've tripped over the futex_requeue drop_count refering to key2 instead of key1. The code is actually correct, but is non-intuitive. This patch adds an explicit comment explaining the requeue. Signed-off-by: Darren Hart <dvhltc@us.ibm.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-13futex: remove the pointer math from double_unlock_hb, fixIngo Molnar
Impact: fix double unlock crash Thomas Gleixner noticed that the simplified double_unlock_hb() became ... too unsophisticated: in the hb1 == hb2 case it will do a double unlock. Reported-by: Thomas Gleixner <tglx@linutronix.de> Cc: Darren Hart <dvhltc@us.ibm.com> LKML-Reference: <20090312221118.11146.68610.stgit@Aeon> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-13futex: remove the pointer math from double_unlock_hbDarren Hart
Impact: simplify code I mistakenly included the pointer value ordering in the double_unlock_hb() in my previous patch. It's only necessary in the double_lock_hb() function. This patch removes it. Signed-off-by: Darren Hart <dvhltc@us.ibm.com> Acked-by: Peter Zijlstra <peterz@infradead.org> Cc: Rusty Russell <rusty@rustcorp.com.au> LKML-Reference: <20090312221118.11146.68610.stgit@Aeon> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-12futex: clean up fault logicDarren Hart
Impact: cleanup Older versions of the futex code held the mmap_sem which had to be dropped in order to call get_user(), so a two-pronged fault handling mechanism was employed to handle faults of the atomic operations. The mmap_sem is no longer held, so get_user() should be adequate. This patch greatly simplifies the logic and improves legibility. Build and boot tested on a 4 way Intel x86_64 workstation. Passes basic pthread_mutex and PI tests out of ltp/testcases/realtime. Signed-off-by: Darren Hart <dvhltc@us.ibm.com> Acked-by: Peter Zijlstra <peterz@infradead.org> Cc: Rusty Russell <rusty@rustcorp.com.au> LKML-Reference: <20090312075612.9856.48612.stgit@Aeon> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-12futex: unlock before returning -EFAULTDarren Hart
Impact: rt-mutex failure case fix futex_lock_pi can potentially return -EFAULT with the rt_mutex held. This seems like the wrong thing to do as userspace should assume -EFAULT means the lock was not taken. Even if it could figure this out, we'd be leaving the pi_state->owner in an inconsistent state. This patch unlocks the rt_mutex prior to returning -EFAULT to userspace. Build and boot tested on a 4 way Intel x86_64 workstation. Passes basic pthread_mutex and PI tests out of ltp/testcases/realtime. Signed-off-by: Darren Hart <dvhltc@us.ibm.com> Acked-by: Peter Zijlstra <peterz@infradead.org> Cc: Rusty Russell <rusty@rustcorp.com.au> LKML-Reference: <20090312075606.9856.88729.stgit@Aeon> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-12futex: use current->time_slack_ns for rt tasks tooDarren Hart
RT tasks should set their timer slack to 0 on their own. This patch removes the 'if (rt_task()) slack = 0;' block in futex_wait. Build and boot tested on a 4 way Intel x86_64 workstation. Passes basic pthread_mutex and PI tests out of ltp/testcases/realtime. Signed-off-by: Darren Hart <dvhltc@us.ibm.com> Acked-by: Peter Zijlstra <peterz@infradead.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Arjan van de Ven <arjan@linux.intel.com> LKML-Reference: <20090312075559.9856.28822.stgit@Aeon> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-12futex: add double_unlock_hb()Darren Hart
Impact: cleanup The futex code uses double_lock_hb() which locks the hb->lock's in pointer value order. There is no parallel unlock routine, and the code unlocks them in name order, ignoring pointer value. This patch adds double_unlock_hb() to refactor the duplicated code segments. Build and boot tested on a 4 way Intel x86_64 workstation. Passes basic pthread_mutex and PI tests out of ltp/testcases/realtime. Signed-off-by: Darren Hart <dvhltc@us.ibm.com> Acked-by: Peter Zijlstra <peterz@infradead.org> Cc: Rusty Russell <rusty@rustcorp.com.au> LKML-Reference: <20090312075552.9856.48021.stgit@Aeon> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-12futex: additional (get|put)_futex_key() fixesDarren Hart
Impact: fix races futex_requeue and futex_lock_pi still had some bad (get|put)_futex_key() usage. This patch adds the missing put_futex_keys() and corrects a goto in futex_lock_pi() to avoid a double get. Build and boot tested on a 4 way Intel x86_64 workstation. Passes basic pthread_mutex and PI tests out of ltp/testcases/realtime. Signed-off-by: Darren Hart <dvhltc@us.ibm.com> Acked-by: Peter Zijlstra <peterz@infradead.org> Cc: Rusty Russell <rusty@rustcorp.com.au> LKML-Reference: <20090312075545.9856.75152.stgit@Aeon> Signed-off-by: Ingo Molnar <mingo@elte.hu>