summaryrefslogtreecommitdiff
path: root/net/8021q/vlan_dev.c
AgeCommit message (Collapse)Author
2009-05-29net: convert unicast addr listJiri Pirko
This patch converts unicast address list to standard list_head using previously introduced struct netdev_hw_addr. It also relaxes the locking. Original spinlock (still used for multicast addresses) is not needed and is no longer used for a protection of this list. All reading and writing takes place under rtnl (with no changes). I also removed a possibility to specify the length of the address while adding or deleting unicast address. It's always dev->addr_len. The convertion touched especially e1000 and ixgbe codes when the change is not so trivial. Signed-off-by: Jiri Pirko <jpirko@redhat.com> drivers/net/bnx2.c | 13 +-- drivers/net/e1000/e1000_main.c | 24 +++-- drivers/net/ixgbe/ixgbe_common.c | 14 ++-- drivers/net/ixgbe/ixgbe_common.h | 4 +- drivers/net/ixgbe/ixgbe_main.c | 6 +- drivers/net/ixgbe/ixgbe_type.h | 4 +- drivers/net/macvlan.c | 11 +- drivers/net/mv643xx_eth.c | 11 +- drivers/net/niu.c | 7 +- drivers/net/virtio_net.c | 7 +- drivers/s390/net/qeth_l2_main.c | 6 +- drivers/scsi/fcoe/fcoe.c | 16 ++-- include/linux/netdevice.h | 18 ++-- net/8021q/vlan.c | 4 +- net/8021q/vlan_dev.c | 10 +- net/core/dev.c | 195 +++++++++++++++++++++++++++----------- net/dsa/slave.c | 10 +- net/packet/af_packet.c | 4 +- 18 files changed, 227 insertions(+), 137 deletions(-) Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-25net: remove COMPAT_NET_DEV_OPSAlexander Beregalov
All drivers are already converted to new net_device_ops API and nobody uses old API anymore. Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-18net: release dst entry in dev_hard_start_xmit()Eric Dumazet
One point of contention in high network loads is the dst_release() performed when a transmited skb is freed. This is because NIC tx completion calls dev_kree_skb() long after original call to dev_queue_xmit(skb). CPU cache is cold and the atomic op in dst_release() stalls. On SMP, this is quite visible if one CPU is 100% handling softirqs for a network device, since dst_clone() is done by other cpus, involving cache line ping pongs. It seems right place to release dst is in dev_hard_start_xmit(), for most devices but ones that are virtual, and some exceptions. David Miller suggested to define a new device flag, set in alloc_netdev_mq() (so that most devices set it at init time), and carefuly unset in devices which dont want a NULL skb->dst in their ndo_start_xmit(). List of devices that must clear this flag is : - loopback device, because it calls netif_rx() and quoting Patrick : "ip_route_input() doesn't accept loopback addresses, so loopback packets already need to have a dst_entry attached." - appletalk/ipddp.c : needs skb->dst in its xmit function - And all devices that call again dev_queue_xmit() from their xmit function (as some classifiers need skb->dst) : bonding, vlan, macvlan, eql, ifb, hdlc_fr Signed-off-by: Eric Dumazet <dada1@cosmosbay.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-18vlan: use struct netdev_queue counters instead of dev->statsEric Dumazet
We can update netdev_queue tx_bytes/tx_packets/tx_dropped counters instead of dev->stats ones, to reduce number of cache lines dirtied in xmit path. This fixes a performance problem on SMP when many different cpus take vlan tx path. Signed-off-by: Eric Dumazet <dada1@cosmosbay.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-29Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: Documentation/isdn/00-INDEX drivers/net/wireless/iwlwifi/iwl-scan.c drivers/net/wireless/rndis_wlan.c net/mac80211/main.c
2009-04-25vlan: update vlan carrier state for admin up/downJay Vosburgh
Currently, the VLAN event handler does not adjust the VLAN device's carrier state when the real device or the VLAN device is set administratively up or down. The following patch adds a transfer of operating state from the real device to the VLAN device when the real device is administratively set up or down, and sets the carrier state up or down during init, open and close of the VLAN device. This permits observers above the VLAN device that care about the carrier state (bonding's link monitor, for example) to receive updates for administrative changes by more closely mimicing the behavior of real devices. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Patrick McHardy <kaber@trash.net>
2009-04-21net: factor out ethtool invocation of vlan/macvlan driversPatrick McHardy
Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-17vlan/macvlan: fix NULL pointer dereferences in ethtool handlersPatrick McHardy
Check whether the underlying device provides a set of ethtool ops before checking for individual handlers to avoid NULL pointer dereferences. Reported-by: Art van Breemen <ard@telegraafnet.nl> Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-04vlan: Fix vlan-in-vlan crashes.David S. Miller
As analyzed by Patrick McHardy, vlan needs to reset it's netdev_ops pointer in it's ->init() function but this leaves the compat method pointers stale. Add a netdev_resync_ops() and call it from the vlan code. Any other driver which changes ->netdev_ops after register_netdevice() will need to call this new function after doing so too. With help from Patrick McHardy. Tested-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-08vlan: add neigh_setupFrank Blaschka
In case the real device has a neigh_setup function, this neigh_setup function should be used for the vlan device. Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-25vlan: fix convertion to net_device_opsEric Dumazet
commit 656299f706e52e0409733d704c2761f1b12d6954 (vlan: convert to net_device_ops) added a net_device_ops with a NULL ndo_start_xmit field. This gives a crash in dev_hard_start_xmit() Fix it using two net_device_ops structures, one for hwaccel vlan, one for non hwaccel vlan. Signed-off-by: Eric Dumazet <dada1@cosmosbay.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-19vlan: convert to net_device_opsStephen Hemminger
Convert vlan devices and function pointers to net_device_ops. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-03net/: Kill now superfluous ->last_rx stores.David S. Miller
The generic packet receive code takes care of setting netdev->last_rx when necessary, for the sake of the bonding ARP monitor. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-28vlan: propogate ethtool speed valuesStephen Hemminger
This enables more ethtool information. The speed and settings of the underlying device are propagated up. This makes services like SNMP that use ethtool to get speed setting, work when managing a vlan, without adding silly heurtistics into SNMP daemon. For the driver info, just use existing driver strings. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-09-20net: Use hton[sl]() instead of __constant_hton[sl]() where applicableArnaldo Carvalho de Melo
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-09-11vlan: vlan device not reading gso max size of parent.Alexander Duyck
The vlan devices are not reading the gso max size of the parent device. As a result devices that do not support 64K max gso size are currently failing. This issue is seen on 2.6.26 kernels as well and the same patch should be able to be applied without any issues. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-22netdev: Handle ->addr_list_lock just like ->_xmit_lock for lockdep.David S. Miller
The new address list lock needs to handle the same device layering issues that the _xmit_lock one does. This integrates work done by Patrick McHardy. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-17netdev: Allocate multiple queues for TX.David S. Miller
alloc_netdev_mq() now allocates an array of netdev_queue structures for TX, based upon the queue_count argument. Furthermore, all accesses to the TX queues are now vectored through the netdev_get_tx_queue() and netdev_for_each_tx_queue() interfaces. This makes it easy to grep the tree for all things that want to get to a TX queue of a net device. Problem spots which are not really multiqueue aware yet, and only work with one queue, can easily be spotted by grepping for all netdev_get_tx_queue() calls that pass in a zero index. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-14vlan: remove unnecessary include statementsPatrick McHardy
Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-14vlan: clean up hard_start_xmit functionsPatrick McHardy
Remove excessive comments and debugging, use NETDEV_TX codes, remove some empty lines. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-14vlan: clean up vlan_dev_hard_header()Patrick McHardy
Remove some debugging and excessive comments, merge the two dev_hard_header calls into one. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-14vlan: ethtool ->get_flags supportPatrick McHardy
Allow to query LRO settings of underlying device when VLAN RX acceleration is used. Suggested by Ben Hutchings <bhutchings@solarflare.com>. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-148021q: Check return of dev_set_promiscuity/allmultiWang Chen
dev_set_promiscuity/allmulti might overflow. Commit: "netdevice: Fix promiscuity and allmulti overflow" in net-next makes dev_set_promiscuity/allmulti return error number if overflow happened. Here, we check all positive increment for promiscuity and allmulti to get error return. Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com> Acked-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-08netdev: Move _xmit_lock and xmit_lock_owner into netdev_queue.David S. Miller
Accesses are mostly structured such that when there are multiple TX queues the code transformations will be a little bit simpler. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-08vlan: avoid header copying and linearisation where possiblePatrick McHardy
- vlan_dev_reorder_header() is only called on the receive path after calling skb_share_check(). This means we can use skb_cow() since all we need is a writable header. - vlan_dev_hard_header() includes a work-around for some apparently broken out of tree MPLS code. The hard_header functions can expect to always have a headroom of at least there own hard_header_len available, so the reallocation check is unnecessary. - __vlan_put_tag() can use skb_cow_head() to avoid the skb_unshare() copy when the header is writable. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-08vlan: TCI related type and naming cleanupsPatrick McHardy
The VLAN code contains multiple spots that use tag, id and tci as identifiers for arguments and variables incorrectly and they actually contain or are expected to contain something different. Additionally types are used inconsistently (unsigned short vs u16) and identifiers are sometimes capitalized. - consistently use u16 for storing TCI, ID or QoS values - consistently use vlan_id and vlan_tci for storing the respective values - remove capitalization - add kdoc comment to netif_hwaccel_{rx,receive_skb} Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-08vlan: move struct vlan_dev_info to private headerPatrick McHardy
Hide struct vlan_dev_info from drivers to prevent them from growing more creative ways to use it. Provide accessors for the two drivers that currently use it. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-08vlan: Add ethtool supportPatrick McHardy
Add ethtool support for querying the device for offload settings. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-08vlan: Use is_vlan_dev()Joonwoo Park
Use simplified is_vlan_dev function. Signed-off-by: Joonwoo Park <joonwpark81@gmail.com> Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-08vlan: fix network_header/mac_header adjustmentsPatrick McHardy
Lennert Buytenhek points out that the VLAN code incorrectly adjusts skb->network_header to point in the middle of the VLAN header and additionally tries to adjust skb->mac_header without checking for validity. The network_header should not be touched at all since we're only adding headers in front of it, mac_header adjustments are not necessary at all. Based on patch by Lennert Buytenhek <buytenh@wantstofly.org>. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-05vlan: Add GVRP supportPatrick McHardy
Add GVRP support for dynamically registering VLANs with switches. By default GVRP is disabled because we only support the applicant-only participant model, which means it should not be enabled on vlans that are members of a bridge. Since there is currently no way to cleanly determine that, the user is responsible for enabling it. The code is pretty small and low impact, its wrapped in a config option though because it depends on the GARP implementation and the STP core. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-05vlan: Change vlan_dev_set_vlan_flag() to handle multiple flags at oncePatrick McHardy
Change vlan_dev_set_vlan_flag() to handle multiple flags at once and rename to vlan_dev_change_flags(). This allows to to use it from the netlink interface, which in turn allows to handle necessary adjustments when changing flags centrally. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-05-23vlan: Use bitmask of feature flags instead of seperate feature bitsPatrick McHardy
Herbert Xu points out that the use of seperate feature bits for features to be propagated to VLAN devices is going to get messy real soon. Replace the VLAN feature bits by a bitmask of feature flags to be propagated and restore the old GSO_SHIFT/MASK values. Signed-off-by: Patrick McHardy <kaber@trash.net> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-05-20[VLAN]: Propagate selected feature bits to VLAN devicesPatrick McHardy
Propagate feature bits from the NETDEV_FEAT_CHANGE notifier. For now only TSO is propagated for devices that announce their ability to support TSO in combination with VLAN accel by setting the NETIF_F_VLAN_TSO flag. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-04-16[VLAN]: Allow vlan devices registration in net namespaces.Pavel Emelyanov
This one is similar to what I've done for TUN - set the proper net after device allocation and clean VLANs on net exit (use the rtnl_kill_links helper finally). Plus, drop explicit init_net usage and net != &init_net checks. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Acked-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-04-14Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/ehea/ehea_main.c drivers/net/wireless/iwlwifi/Kconfig drivers/net/wireless/rt2x00/rt61pci.c net/ipv4/inet_timewait_sock.c net/ipv6/raw.c net/mac80211/ieee80211_sta.c
2008-04-04[VLAN]: Fix egress priority mappings leak.Pavel Emelyanov
These entries are allocated in vlan_dev_set_egress_priority, but are never released and leaks on vlan device removal. Drop these in vlan's ->uninit callback - after the device is brought down and everyone is notified about it is going to be unregistered. Found during testing vlan netnsization patchset. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Acked-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-03-27Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/usb/rndis_host.c drivers/net/wireless/b43/dma.c net/ipv6/ndisc.c
2008-03-26[VLAN]: Don't copy ALLMULTI/PROMISC flags from underlying devicePatrick McHardy
Changing these flags requires to use dev_set_allmulti/dev_set_promiscuity or dev_change_flags. Setting it directly causes two unwanted effects: - the next dev_change_flags call will notice a difference between dev->gflags and the actual flags, enable promisc/allmulti mode and incorrectly update dev->gflags - this keeps the underlying device in promisc/allmulti mode until the VLAN device is deleted Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-03-26[NET] NETNS: Omit net_device->nd_net without CONFIG_NET_NS.YOSHIFUJI Hideaki
Introduce per-net_device inlines: dev_net(), dev_net_set(). Without CONFIG_NET_NS, no namespace other than &init_net exists. Let's explicitly define them to help compiler optimizations. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-03-18Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/wireless/rt2x00/rt2x00dev.c net/8021q/vlan_dev.c
2008-03-17[8021Q]: vlan_dev misannotationsAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-03-05net: replace remaining __FUNCTION__ occurrencesHarvey Harrison
__FUNCTION__ is gcc-specific, use __func__ Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-23[NET]: Restore sanity wrt. print_mac().David S. Miller
MAC_FMT had only one user and we tried to get rid of that, but this created more problems than it solved. As a result, this reverts three commits: 235365f3aaaa10b7056293877c0ead50425f25c7 ("net/8021q/vlan_dev.c: Use print_mac."), fea5fa875eb235dc186b1f5184eb36abc63e26cc ("[NET]: Remove MAC_FMT"), and 8f789c48448aed74fe1c07af76de8f04adacec7d ("[NET]: Elminate spurious print_mac() calls.") Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-17net/8021q/vlan_dev.c: Use print_mac.Joe Perches
Remove direct use of MAC_FMT Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-31[VLAN]: set_rx_mode support for unicast address listChris Leech
Reuse the existing logic for multicast list synchronization for the unicast address list. The core of dev_mc_sync/unsync are split out as __dev_addr_sync/unsync and moved from dev_mcast.c to dev.c. These are then used to implement dev_unicast_sync/unsync as well. I'm working on cleaning up Intel's FCoE stack, which generates new MAC addresses from the fibre channel device id assigned by the fabric as per the current draft specification in T11. When using such a protocol in a VLAN environment it would be nice to not always be forced into promiscuous mode, assuming the underlying Ethernet driver supports multiple unicast addresses as well. Signed-off-by: Chris Leech <christopher.leech@intel.com> Signed-off-by: Patrick McHardy <kaber@trash.net>
2008-01-28[VLAN]: Move protocol determination to seperate functionPavel Emelyanov
I think, that we can make this code flow easier to understand by introducing the vlan_set_encap_proto() function (I hope the name is good) to setup the skb proto and merge the paths calling netif_rx() together. [Patrick: Modified to apply on top of my previous patches] Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[VLAN]: Clean up vlan_skb_recv()Patrick McHardy
- remove three instances of identical code - remove unnecessary NULL initialization - remove obvious and unnecessary comments Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[VLAN]: Update list addressPatrick McHardy
VLAN related mail should go to netdev. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[VLAN]: checkpatch cleanupsPatrick McHardy
Checkpatch cleanups, consisting mainly of overly long lines and missing spaces. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.0.4) at 2024-05-25 23:04:50 +0000