summaryrefslogtreecommitdiff
path: root/net/ipv6/route.c
AgeCommit message (Collapse)Author
2018-03-03ipv6: icmp6: Allow icmp messages to be looped backBrendan McGrath
[ Upstream commit 588753f1eb18978512b1c9b85fddb457d46f9033 ] One example of when an ICMPv6 packet is required to be looped back is when a host acts as both a Multicast Listener and a Multicast Router. A Multicast Router will listen on address ff02::16 for MLDv2 messages. Currently, MLDv2 messages originating from a Multicast Listener running on the same host as the Multicast Router are not being delivered to the Multicast Router. This is due to dst.input being assigned the default value of dst_discard. This results in the packet being looped back but discarded before being delivered to the Multicast Router. This patch sets dst.input to ip6_input to ensure a looped back packet is delivered to the Multicast Router. Signed-off-by: Brendan McGrath <redmcg@redmandi.dyndns.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-30ipv6: only call ip6_route_dev_notify() once for NETDEV_UNREGISTERWANG Cong
commit 76da0704507bbc51875013f6557877ab308cfd0a upstream. In commit 242d3a49a2a1 ("ipv6: reorder ip6_route_dev_notifier after ipv6_dev_notf") I assumed NETDEV_REGISTER and NETDEV_UNREGISTER are paired, unfortunately, as reported by jeffy, netdev_wait_allrefs() could rebroadcast NETDEV_UNREGISTER event until all refs are gone. We have to add an additional check to avoid this corner case. For netdev_wait_allrefs() dev->reg_state is NETREG_UNREGISTERED, for dev_change_net_namespace(), dev->reg_state is NETREG_REGISTERED. So check for dev->reg_state != NETREG_UNREGISTERED. Fixes: 242d3a49a2a1 ("ipv6: reorder ip6_route_dev_notifier after ipv6_dev_notf") Reported-by: jeffy <jeffy.chen@rock-chips.com> Cc: David Ahern <dsahern@gmail.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-09-20ipv6: Fix may be used uninitialized warning in rt6_checkSteffen Klassert
commit 3614364527daa870264f6dde77f02853cdecd02c upstream. rt_cookie might be used uninitialized, fix this by initializing it. Fixes: c5cff8561d2d ("ipv6: add rcu grace period before freeing fib6_node") Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: David S. Miller <davem@davemloft.net> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-09-20ipv6: fix sparse warning on rt6i_nodeWei Wang
[ Upstream commit 4e587ea71bf924f7dac621f1351653bd41e446cb ] Commit c5cff8561d2d adds rcu grace period before freeing fib6_node. This generates a new sparse warning on rt->rt6i_node related code: net/ipv6/route.c:1394:30: error: incompatible types in comparison expression (different address spaces) ./include/net/ip6_fib.h:187:14: error: incompatible types in comparison expression (different address spaces) This commit adds "__rcu" tag for rt6i_node and makes sure corresponding rcu API is used for it. After this fix, sparse no longer generates the above warning. Fixes: c5cff8561d2d ("ipv6: add rcu grace period before freeing fib6_node") Signed-off-by: Wei Wang <weiwan@google.com> Acked-by: Eric Dumazet <edumazet@google.com> Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-09-20ipv6: add rcu grace period before freeing fib6_nodeWei Wang
[ Upstream commit c5cff8561d2d0006e972bd114afd51f082fee77c ] We currently keep rt->rt6i_node pointing to the fib6_node for the route. And some functions make use of this pointer to dereference the fib6_node from rt structure, e.g. rt6_check(). However, as there is neither refcount nor rcu taken when dereferencing rt->rt6i_node, it could potentially cause crashes as rt->rt6i_node could be set to NULL by other CPUs when doing a route deletion. This patch introduces an rcu grace period before freeing fib6_node and makes sure the functions that dereference it takes rcu_read_lock(). Note: there is no "Fixes" tag because this bug was there in a very early stage. Signed-off-by: Wei Wang <weiwan@google.com> Acked-by: Eric Dumazet <edumazet@google.com> Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-21net: ipv6: Compare lwstate in detecting duplicate nexthopsDavid Ahern
commit f06b7549b79e29a672336d4e134524373fb7a232 upstream. Lennert reported a failure to add different mpls encaps in a multipath route: $ ip -6 route add 1234::/16 \ nexthop encap mpls 10 via fe80::1 dev ens3 \ nexthop encap mpls 20 via fe80::1 dev ens3 RTNETLINK answers: File exists The problem is that the duplicate nexthop detection does not compare lwtunnel configuration. Add it. Fixes: 19e42e451506 ("ipv6: support for fib route lwtunnel encap attributes") Signed-off-by: David Ahern <dsahern@gmail.com> Reported-by: João Taveira Araújo <joao.taveira@gmail.com> Reported-by: Lennert Buytenhek <buytenh@wantstofly.org> Acked-by: Roopa Prabhu <roopa@cumulusnetworks.com> Tested-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-14ipv6: reorder ip6_route_dev_notifier after ipv6_dev_notfWANG Cong
[ Upstream commit 242d3a49a2a1a71d8eb9f953db1bcaa9d698ce00 ] For each netns (except init_net), we initialize its null entry in 3 places: 1) The template itself, as we use kmemdup() 2) Code around dst_init_metrics() in ip6_route_net_init() 3) ip6_route_dev_notify(), which is supposed to initialize it after loopback registers Unfortunately the last one still happens in a wrong order because we expect to initialize net->ipv6.ip6_null_entry->rt6i_idev to net->loopback_dev's idev, thus we have to do that after we add idev to loopback. However, this notifier has priority == 0 same as ipv6_dev_notf, and ipv6_dev_notf is registered after ip6_route_dev_notifier so it is called actually after ip6_route_dev_notifier. This is similar to commit 2f460933f58e ("ipv6: initialize route null entry in addrconf_init()") which fixes init_net. Fix it by picking a smaller priority for ip6_route_dev_notifier. Also, we have to release the refcnt accordingly when unregistering loopback_dev because device exit functions are called before subsys exit functions. Acked-by: David Ahern <dsahern@gmail.com> Tested-by: David Ahern <dsahern@gmail.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-14ipv6: initialize route null entry in addrconf_init()WANG Cong
[ Upstream commit 2f460933f58eee3393aba64f0f6d14acb08d1724 ] Andrey reported a crash on init_net.ipv6.ip6_null_entry->rt6i_idev since it is always NULL. This is clearly wrong, we have code to initialize it to loopback_dev, unfortunately the order is still not correct. loopback_dev is registered very early during boot, we lose a chance to re-initialize it in notifier. addrconf_init() is called after ip6_route_init(), which means we have no chance to correct it. Fix it by moving this initialization explicitly after ipv6_add_dev(init_net.loopback_dev) in addrconf_init(). Reported-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Tested-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-03net: ipv6: RTF_PCPU should not be settable from userspaceDavid Ahern
[ Upstream commit 557c44be917c322860665be3d28376afa84aa936 ] Andrey reported a fault in the IPv6 route code: kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] SMP KASAN Modules linked in: CPU: 1 PID: 4035 Comm: a.out Not tainted 4.11.0-rc7+ #250 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 task: ffff880069809600 task.stack: ffff880062dc8000 RIP: 0010:ip6_rt_cache_alloc+0xa6/0x560 net/ipv6/route.c:975 RSP: 0018:ffff880062dced30 EFLAGS: 00010206 RAX: dffffc0000000000 RBX: ffff8800670561c0 RCX: 0000000000000006 RDX: 0000000000000003 RSI: ffff880062dcfb28 RDI: 0000000000000018 RBP: ffff880062dced68 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 R13: ffff880062dcfb28 R14: dffffc0000000000 R15: 0000000000000000 FS: 00007feebe37e7c0(0000) GS:ffff88006cb00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000205a0fe4 CR3: 000000006b5c9000 CR4: 00000000000006e0 Call Trace: ip6_pol_route+0x1512/0x1f20 net/ipv6/route.c:1128 ip6_pol_route_output+0x4c/0x60 net/ipv6/route.c:1212 ... Andrey's syzkaller program passes rtmsg.rtmsg_flags with the RTF_PCPU bit set. Flags passed to the kernel are blindly copied to the allocated rt6_info by ip6_route_info_create making a newly inserted route appear as though it is a per-cpu route. ip6_rt_cache_alloc sees the flag set and expects rt->dst.from to be set - which it is not since it is not really a per-cpu copy. The subsequent call to __ip6_dst_alloc then generates the fault. Fix by checking for the flag and failing with EINVAL. Fixes: d52d3997f843f ("ipv6: Create percpu rt6_info") Reported-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Acked-by: Martin KaFai Lau <kafai@fb.com> Tested-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-04-21net: ipv6: check route protocol when deleting routesMantas M
commit c2ed1880fd61a998e3ce40254a99a2ad000f1a7d upstream. The protocol field is checked when deleting IPv4 routes, but ignored for IPv6, which causes problems with routing daemons accidentally deleting externally set routes (observed by multiple bird6 users). This can be verified using `ip -6 route del <prefix> proto something`. Signed-off-by: Mantas Mikulėnas <grawity@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Cc: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-04lwtunnel: fix autoload of lwt modulesDavid Ahern
[ Upstream commit 9ed59592e3e379b2e9557dc1d9e9ec8fcbb33f16] Trying to add an mpls encap route when the MPLS modules are not loaded hangs. For example: CONFIG_MPLS=y CONFIG_NET_MPLS_GSO=m CONFIG_MPLS_ROUTING=m CONFIG_MPLS_IPTUNNEL=m $ ip route add 10.10.10.10/32 encap mpls 100 via inet 10.100.1.2 The ip command hangs: root 880 826 0 21:25 pts/0 00:00:00 ip route add 10.10.10.10/32 encap mpls 100 via inet 10.100.1.2 $ cat /proc/880/stack [<ffffffff81065a9b>] call_usermodehelper_exec+0xd6/0x134 [<ffffffff81065efc>] __request_module+0x27b/0x30a [<ffffffff814542f6>] lwtunnel_build_state+0xe4/0x178 [<ffffffff814aa1e4>] fib_create_info+0x47f/0xdd4 [<ffffffff814ae451>] fib_table_insert+0x90/0x41f [<ffffffff814a8010>] inet_rtm_newroute+0x4b/0x52 ... modprobe is trying to load rtnl-lwt-MPLS: root 881 5 0 21:25 ? 00:00:00 /sbin/modprobe -q -- rtnl-lwt-MPLS and it hangs after loading mpls_router: $ cat /proc/881/stack [<ffffffff81441537>] rtnl_lock+0x12/0x14 [<ffffffff8142ca2a>] register_netdevice_notifier+0x16/0x179 [<ffffffffa0033025>] mpls_init+0x25/0x1000 [mpls_router] [<ffffffff81000471>] do_one_initcall+0x8e/0x13f [<ffffffff81119961>] do_init_module+0x5a/0x1e5 [<ffffffff810bd070>] load_module+0x13bd/0x17d6 ... The problem is that lwtunnel_build_state is called with rtnl lock held preventing mpls_init from registering. Given the potential references held by the time lwtunnel_build_state it can not drop the rtnl lock to the load module. So, extract the module loading code from lwtunnel_build_state into a new function to validate the encap type. The new function is called while converting the user request into a fib_config which is well before any table, device or fib entries are examined. Fixes: 745041e2aaf1 ("lwtunnel: autoload of lwt modules") Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-04net: lwtunnel: Handle lwtunnel_fill_encap failureDavid Ahern
[ Upstream commit ea7a80858f57d8878b1499ea0f1b8a635cc48de7 ] Handle failure in lwtunnel_fill_encap adding attributes to skb. Fixes: 571e722676fe ("ipv4: support for fib route lwtunnel encap attributes") Fixes: 19e42e451506 ("ipv6: support for fib route lwtunnel encap attributes") Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-09net-ipv6: on device mtu change do not add mtu to mtu-less routesMaciej Żenczykowski
Routes can specify an mtu explicitly or inherit the mtu from the underlying device - this inheritance is implemented in dst->ops->mtu handlers ip6_mtu() and ip6_blackhole_mtu(). Currently changing the mtu of a device adds mtu explicitly to routes using that device. ie. # ip link set dev lo mtu 65536 # ip -6 route add local 2000::1 dev lo # ip -6 route get 2000::1 local 2000::1 dev lo table local src ... metric 1024 pref medium # ip link set dev lo mtu 65535 # ip -6 route get 2000::1 local 2000::1 dev lo table local src ... metric 1024 mtu 65535 pref medium # ip link set dev lo mtu 65536 # ip -6 route get 2000::1 local 2000::1 dev lo table local src ... metric 1024 mtu 65536 pref medium # ip -6 route del local 2000::1 After this patch the route entry no longer changes unless it already has an mtu. There is no need: this inheritance is already done in ip6_mtu() # ip link set dev lo mtu 65536 # ip -6 route add local 2000::1 dev lo # ip -6 route add local 2000::2 dev lo mtu 2000 # ip -6 route get 2000::1; ip -6 route get 2000::2 local 2000::1 dev lo table local src ... metric 1024 pref medium local 2000::2 dev lo table local src ... metric 1024 mtu 2000 pref medium # ip link set dev lo mtu 65535 # ip -6 route get 2000::1; ip -6 route get 2000::2 local 2000::1 dev lo table local src ... metric 1024 pref medium local 2000::2 dev lo table local src ... metric 1024 mtu 2000 pref medium # ip link set dev lo mtu 1501 # ip -6 route get 2000::1; ip -6 route get 2000::2 local 2000::1 dev lo table local src ... metric 1024 pref medium local 2000::2 dev lo table local src ... metric 1024 mtu 1501 pref medium # ip link set dev lo mtu 65536 # ip -6 route get 2000::1; ip -6 route get 2000::2 local 2000::1 dev lo table local src ... metric 1024 pref medium local 2000::2 dev lo table local src ... metric 1024 mtu 65536 pref medium # ip -6 route del local 2000::1 # ip -6 route del local 2000::2 This is desirable because changing device mtu and then resetting it to the previous value shouldn't change the user visible routing table. Signed-off-by: Maciej Żenczykowski <maze@google.com> CC: Eric Dumazet <edumazet@google.com> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-31ipv6: add mtu lock check in __ip6_rt_update_pmtuXin Long
Prior to this patch, ipv6 didn't do mtu lock check in ip6_update_pmtu. It leaded to that mtu lock doesn't really work when receiving the pkt of ICMPV6_PKT_TOOBIG. This patch is to add mtu lock check in __ip6_rt_update_pmtu just as ipv4 did in __ip_rt_update_pmtu. Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-27net: ipv6: Do not consider link state for nexthop validationDavid Ahern
Similar to IPv4, do not consider link state when validating next hops. Currently, if the link is down default routes can fail to insert: $ ip -6 ro add vrf blue default via 2100:2::64 dev eth2 RTNETLINK answers: No route to host With this patch the command succeeds. Fixes: 8c14586fc320 ("net: ipv6: Use passed in table for nexthop lookups") Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-27net: ipv6: Fix processing of RAs in presence of VRFDavid Ahern
rt6_add_route_info and rt6_add_dflt_router were updated to pull the FIB table from the device index, but the corresponding rt6_get_route_info and rt6_get_dflt_router functions were not leading to the failure to process RA's: ICMPv6: RA: ndisc_router_discovery failed to add default route Fix the 'get' functions by using the table id associated with the device when applicable. Also, now that default routes can be added to tables other than the default table, rt6_purge_dflt_routers needs to be updated as well to look at all tables. To handle that efficiently, add a flag to the table denoting if it is has a default route via RA. Fixes: ca254490c8dfd ("net: Add VRF support to IPv6 stack") Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Three sets of overlapping changes. Nothing serious. Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-25ipmr, ip6mr: fix scheduling while atomic and a deadlock with ipmr_get_routeNikolay Aleksandrov
Since the commit below the ipmr/ip6mr rtnl_unicast() code uses the portid instead of the previous dst_pid which was copied from in_skb's portid. Since the skb is new the portid is 0 at that point so the packets are sent to the kernel and we get scheduling while atomic or a deadlock (depending on where it happens) by trying to acquire rtnl two times. Also since this is RTM_GETROUTE, it can be triggered by a normal user. Here's the sleeping while atomic trace: [ 7858.212557] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:620 [ 7858.212748] in_atomic(): 1, irqs_disabled(): 0, pid: 0, name: swapper/0 [ 7858.212881] 2 locks held by swapper/0/0: [ 7858.213013] #0: (((&mrt->ipmr_expire_timer))){+.-...}, at: [<ffffffff810fbbf5>] call_timer_fn+0x5/0x350 [ 7858.213422] #1: (mfc_unres_lock){+.....}, at: [<ffffffff8161e005>] ipmr_expire_process+0x25/0x130 [ 7858.213807] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.8.0-rc7+ #179 [ 7858.213934] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.7.5-20140531_083030-gandalf 04/01/2014 [ 7858.214108] 0000000000000000 ffff88005b403c50 ffffffff813a7804 0000000000000000 [ 7858.214412] ffffffff81a1338e ffff88005b403c78 ffffffff810a4a72 ffffffff81a1338e [ 7858.214716] 000000000000026c 0000000000000000 ffff88005b403ca8 ffffffff810a4b9f [ 7858.215251] Call Trace: [ 7858.215412] <IRQ> [<ffffffff813a7804>] dump_stack+0x85/0xc1 [ 7858.215662] [<ffffffff810a4a72>] ___might_sleep+0x192/0x250 [ 7858.215868] [<ffffffff810a4b9f>] __might_sleep+0x6f/0x100 [ 7858.216072] [<ffffffff8165bea3>] mutex_lock_nested+0x33/0x4d0 [ 7858.216279] [<ffffffff815a7a5f>] ? netlink_lookup+0x25f/0x460 [ 7858.216487] [<ffffffff8157474b>] rtnetlink_rcv+0x1b/0x40 [ 7858.216687] [<ffffffff815a9a0c>] netlink_unicast+0x19c/0x260 [ 7858.216900] [<ffffffff81573c70>] rtnl_unicast+0x20/0x30 [ 7858.217128] [<ffffffff8161cd39>] ipmr_destroy_unres+0xa9/0xf0 [ 7858.217351] [<ffffffff8161e06f>] ipmr_expire_process+0x8f/0x130 [ 7858.217581] [<ffffffff8161dfe0>] ? ipmr_net_init+0x180/0x180 [ 7858.217785] [<ffffffff8161dfe0>] ? ipmr_net_init+0x180/0x180 [ 7858.217990] [<ffffffff810fbc95>] call_timer_fn+0xa5/0x350 [ 7858.218192] [<ffffffff810fbbf5>] ? call_timer_fn+0x5/0x350 [ 7858.218415] [<ffffffff8161dfe0>] ? ipmr_net_init+0x180/0x180 [ 7858.218656] [<ffffffff810fde10>] run_timer_softirq+0x260/0x640 [ 7858.218865] [<ffffffff8166379b>] ? __do_softirq+0xbb/0x54f [ 7858.219068] [<ffffffff816637c8>] __do_softirq+0xe8/0x54f [ 7858.219269] [<ffffffff8107a948>] irq_exit+0xb8/0xc0 [ 7858.219463] [<ffffffff81663452>] smp_apic_timer_interrupt+0x42/0x50 [ 7858.219678] [<ffffffff816625bc>] apic_timer_interrupt+0x8c/0xa0 [ 7858.219897] <EOI> [<ffffffff81055f16>] ? native_safe_halt+0x6/0x10 [ 7858.220165] [<ffffffff810d64dd>] ? trace_hardirqs_on+0xd/0x10 [ 7858.220373] [<ffffffff810298e3>] default_idle+0x23/0x190 [ 7858.220574] [<ffffffff8102a20f>] arch_cpu_idle+0xf/0x20 [ 7858.220790] [<ffffffff810c9f8c>] default_idle_call+0x4c/0x60 [ 7858.221016] [<ffffffff810ca33b>] cpu_startup_entry+0x39b/0x4d0 [ 7858.221257] [<ffffffff8164f995>] rest_init+0x135/0x140 [ 7858.221469] [<ffffffff81f83014>] start_kernel+0x50e/0x51b [ 7858.221670] [<ffffffff81f82120>] ? early_idt_handler_array+0x120/0x120 [ 7858.221894] [<ffffffff81f8243f>] x86_64_start_reservations+0x2a/0x2c [ 7858.222113] [<ffffffff81f8257c>] x86_64_start_kernel+0x13b/0x14a Fixes: 2942e9005056 ("[RTNETLINK]: Use rtnl_unicast() for rtnetlink unicasts") Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
2016-09-20net: ipv6: fallback to full lookup if table lookup is unsuitableVincent Bernat
Commit 8c14586fc320 ("net: ipv6: Use passed in table for nexthop lookups") introduced a regression: insertion of an IPv6 route in a table not containing the appropriate connected route for the gateway but which contained a non-connected route (like a default gateway) fails while it was previously working: $ ip link add eth0 type dummy $ ip link set up dev eth0 $ ip addr add 2001:db8::1/64 dev eth0 $ ip route add ::/0 via 2001:db8::5 dev eth0 table 20 $ ip route add 2001:db8:cafe::1/128 via 2001:db8::6 dev eth0 table 20 RTNETLINK answers: No route to host $ ip -6 route show table 20 default via 2001:db8::5 dev eth0 metric 1024 pref medium After this patch, we get: $ ip route add 2001:db8:cafe::1/128 via 2001:db8::6 dev eth0 table 20 $ ip -6 route show table 20 2001:db8:cafe::1 via 2001:db8::6 dev eth0 metric 1024 pref medium default via 2001:db8::5 dev eth0 metric 1024 pref medium Fixes: 8c14586fc320 ("net: ipv6: Use passed in table for nexthop lookups") Signed-off-by: Vincent Bernat <vincent@bernat.im> Acked-by: David Ahern <dsa@cumulusnetworks.com> Tested-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-19ipv6: Export p6_route_input_lookup symbolMahesh Bandewar
Make ip6_route_input_lookup available outside of ipv6 the module similar to ip_route_input_noref in the IPv4 world. Signed-off-by: Mahesh Bandewar <maheshb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-10net: l3mdev: remove redundant callsDavid Ahern
A previous patch added l3mdev flow update making these hooks redundant. Remove them. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-10net: vrf: Flip IPv6 output path from FIB lookup hook to out hookDavid Ahern
Flip the IPv6 output path to use the l3mdev tx out hook. The VRF dst is not returned on the first FIB lookup. Instead, the dst on the skb is switched at the beginning of the IPv6 output processing to send the packet to the VRF driver on xmit. Link scope addresses (linklocal and multicast) need special handling: specifically the oif the flow struct can not be changed because we want the lookup tied to the enslaved interface. ie., the source address and the returned route MUST point to the interface scope passed in. Convert the existing vrf_get_rt6_dst to handle only link scope addresses. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-10net: l3mdev: Allow the l3mdev to be a loopbackDavid Ahern
Allow an L3 master device to act as the loopback for that L3 domain. For IPv4 the device can also have the address 127.0.0.1. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-30net: lwtunnel: Handle fragmentationRoopa Prabhu
Today mpls iptunnel lwtunnel_output redirect expects the tunnel output function to handle fragmentation. This is ok but can be avoided if we did not do the mpls output redirect too early. ie we could wait until ip fragmentation is done and then call mpls output for each ip fragment. To make this work we will need, 1) the lwtunnel state to carry encap headroom 2) and do the redirect to the encap output handler on the ip fragment (essentially do the output redirect after fragmentation) This patch adds tunnel headroom in lwtstate to make sure we account for tunnel data in mtu calculations during fragmentation and adds new xmit redirect handler to redirect to lwtunnel xmit func after ip fragmentation. This includes IPV6 and some mtu fixes and testing from David Ahern. Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-30Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Several cases of overlapping changes, except the packet scheduler conflicts which deal with the addition of the free list parameter to qdisc_enqueue(). Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-27ipv6: enforce egress device match in per table nexthop lookupsPaolo Abeni
with the commit 8c14586fc320 ("net: ipv6: Use passed in table for nexthop lookups"), net hop lookup is first performed on route creation in the passed-in table. However device match is not enforced in table lookup, so the found route can be later discarded due to egress device mismatch and no global lookup will be performed. This cause the following to fail: ip link add dummy1 type dummy ip link add dummy2 type dummy ip link set dummy1 up ip link set dummy2 up ip route add 2001:db8:8086::/48 dev dummy1 metric 20 ip route add 2001:db8:d34d::/64 via 2001:db8:8086::2 dev dummy1 metric 20 ip route add 2001:db8:8086::/48 dev dummy2 metric 21 ip route add 2001:db8:d34d::/64 via 2001:db8:8086::2 dev dummy2 metric 21 RTNETLINK answers: No route to host This change fixes the issue enforcing device lookup in ip6_nh_lookup_table() v1->v2: updated commit message title Fixes: 8c14586fc320 ("net: ipv6: Use passed in table for nexthop lookups") Reported-and-tested-by: Beniamino Galvani <bgalvani@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Acked-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-17net: ipv6: Move ip6_route_get_saddr to inlineDavid Ahern
VRF driver needs access to ip6_route_get_saddr code. Since it does little beyond ipv6_dev_get_saddr and ipv6_dev_get_saddr is already exported for modules move ip6_route_get_saddr to the header as an inline. Code move only; no functional change. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-15ipv6: introduce neighbour discovery opsAlexander Aring
This patch introduces neighbour discovery ops callback structure. The idea is to separate the handling for 6LoWPAN into the 6lowpan module. These callback offers 6lowpan different handling, such as 802.15.4 short address handling or RFC6775 (Neighbor Discovery Optimization for IPv6 over 6LoWPANs). Cc: David S. Miller <davem@davemloft.net> Cc: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru> Cc: James Morris <jmorris@namei.org> Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org> Cc: Patrick McHardy <kaber@trash.net> Acked-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: Alexander Aring <aar@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-15net: vrf: Handle ipv6 multicast and link-local addressesDavid Ahern
IPv6 multicast and link-local addresses require special handling by the VRF driver: 1. Rather than using the VRF device index and full FIB lookups, packets to/from these addresses should use direct FIB lookups based on the VRF device table. 2. fail sends/receives on a VRF device to/from a multicast address (e.g, make ping6 ff02::1%<vrf> fail) 3. move the setting of the flow oif to the first dst lookup and revert the change in icmpv6_echo_reply made in ca254490c8dfd ("net: Add VRF support to IPv6 stack"). Linklocal/mcast addresses require use of the skb->dev. With this change connections into and out of a VRF enslaved device work for multicast and link-local addresses work (icmp, tcp, and udp) e.g., 1. packets into VM with VRF config: ping6 -c3 fe80::e0:f9ff:fe1c:b974%br1 ping6 -c3 ff02::1%br1 ssh -6 fe80::e0:f9ff:fe1c:b974%br1 2. packets going out a VRF enslaved device: ping6 -c3 fe80::18f8:83ff:fe4b:7a2e%eth1 ping6 -c3 ff02::1%eth1 ssh -6 root@fe80::18f8:83ff:fe4b:7a2e%eth1 Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-11ipv6: use TOS marks from sockets for routing decisionHannes Frederic Sowa
In IPv6 the ToS values are part of the flowlabel in flowi6 and get extracted during fib rule lookup, but we forgot to correctly initialize the flowlabel before the routing lookup. Reported-by: <liam.mcbirnie@boeing.com> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
The nf_conntrack_core.c fix in 'net' is not relevant in 'net-next' because we no longer have a per-netns conntrack hash. The ip_gre.c conflict as well as the iwlwifi ones were cases of overlapping changes. Conflicts: drivers/net/wireless/intel/iwlwifi/mvm/tx.c net/ipv4/ip_gre.c net/netfilter/nf_conntrack_core.c Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-14net/route: enforce hoplimit max valuePaolo Abeni
Currently, when creating or updating a route, no check is performed in both ipv4 and ipv6 code to the hoplimit value. The caller can i.e. set hoplimit to 256, and when such route will be used, packets will be sent with hoplimit/ttl equal to 0. This commit adds checks for the RTAX_HOPLIMIT value, in both ipv4 ipv6 route code, substituting any value greater than 255 with 255. This is consistent with what is currently done for ADVMSS and MTU in the ipv4 code. Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-09net: l3mdev: Move get_saddr and rt6_dstDavid Ahern
Move l3mdev_rt6_dst_by_oif and l3mdev_get_saddr to l3mdev.c. Collapse l3mdev_get_rt6_dst into l3mdev_rt6_dst_by_oif since it is the only user and keep the l3mdev_get_rt6_dst name for consistency with other hooks. A follow-on patch adds more code to these functions making them long for inlined functions. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-27net: ipv6: Use passed in table for nexthop lookupsDavid Ahern
Similar to 3bfd847203c6 ("net: Use passed in table for nexthop lookups") for IPv4, if the route spec contains a table id use that to lookup the next hop first and fall back to a full lookup if it fails (per the fix 4c9bcd117918b ("net: Fix nexthop lookups")). Example: root@kenny:~# ip -6 ro ls table red local 2100:1::1 dev lo proto none metric 0 pref medium 2100:1::/120 dev eth1 proto kernel metric 256 pref medium local 2100:2::1 dev lo proto none metric 0 pref medium 2100:2::/120 dev eth2 proto kernel metric 256 pref medium local fe80::e0:f9ff:fe09:3cac dev lo proto none metric 0 pref medium local fe80::e0:f9ff:fe1c:b974 dev lo proto none metric 0 pref medium fe80::/64 dev eth1 proto kernel metric 256 pref medium fe80::/64 dev eth2 proto kernel metric 256 pref medium ff00::/8 dev red metric 256 pref medium ff00::/8 dev eth1 metric 256 pref medium ff00::/8 dev eth2 metric 256 pref medium unreachable default dev lo metric 240 error -113 pref medium root@kenny:~# ip -6 ro add table red 2100:3::/64 via 2100:1::64 RTNETLINK answers: No route to host Route add fails even though 2100:1::64 is a reachable next hop: root@kenny:~# ping6 -I red 2100:1::64 ping6: Warning: source address might be selected on device other than red. PING 2100:1::64(2100:1::64) from 2100:1::1 red: 56 data bytes 64 bytes from 2100:1::64: icmp_seq=1 ttl=64 time=1.33 ms With this patch: root@kenny:~# ip -6 ro add table red 2100:3::/64 via 2100:1::64 root@kenny:~# ip -6 ro ls table red local 2100:1::1 dev lo proto none metric 0 pref medium 2100:1::/120 dev eth1 proto kernel metric 256 pref medium local 2100:2::1 dev lo proto none metric 0 pref medium 2100:2::/120 dev eth2 proto kernel metric 256 pref medium 2100:3::/64 via 2100:1::64 dev eth1 metric 1024 pref medium local fe80::e0:f9ff:fe09:3cac dev lo proto none metric 0 pref medium local fe80::e0:f9ff:fe1c:b974 dev lo proto none metric 0 pref medium fe80::/64 dev eth1 proto kernel metric 256 pref medium fe80::/64 dev eth2 proto kernel metric 256 pref medium ff00::/8 dev red metric 256 pref medium ff00::/8 dev eth1 metric 256 pref medium ff00::/8 dev eth2 metric 256 pref medium unreachable default dev lo metric 240 error -113 pref medium Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-14ipv6: datagram: Update dst cache of a connected datagram sk during pmtu updateMartin KaFai Lau
There is a case in connected UDP socket such that getsockopt(IPV6_MTU) will return a stale MTU value. The reproducible sequence could be the following: 1. Create a connected UDP socket 2. Send some datagrams out 3. Receive a ICMPV6_PKT_TOOBIG 4. No new outgoing datagrams to trigger the sk_dst_check() logic to update the sk->sk_dst_cache. 5. getsockopt(IPV6_MTU) returns the mtu from the invalid sk->sk_dst_cache instead of the newly created RTF_CACHE clone. This patch updates the sk->sk_dst_cache for a connected datagram sk during pmtu-update code path. Note that the sk->sk_v6_daddr is used to do the route lookup instead of skb->data (i.e. iph). It is because a UDP socket can become connected after sending out some datagrams in un-connected state. or It can be connected multiple times to different destinations. Hence, iph may not be related to where sk is currently connected to. It is done under '!sock_owned_by_user(sk)' condition because the user may make another ip6_datagram_connect() (i.e changing the sk->sk_v6_daddr) while dst lookup is happening in the pmtu-update code path. For the sock_owned_by_user(sk) == true case, the next patch will introduce a release_cb() which will update the sk->sk_dst_cache. Test: Server (Connected UDP Socket): ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Route Details: [root@arch-fb-vm1 ~]# ip -6 r show | egrep '2fac' 2fac::/64 dev eth0 proto kernel metric 256 pref medium 2fac:face::/64 via 2fac::face dev eth0 metric 1024 pref medium A simple python code to create a connected UDP socket: import socket import errno HOST = '2fac::1' PORT = 8080 s = socket.socket(socket.AF_INET6, socket.SOCK_DGRAM) s.bind((HOST, PORT)) s.connect(('2fac:face::face', 53)) print("connected") while True: try: data = s.recv(1024) except socket.error as se: if se.errno == errno.EMSGSIZE: pmtu = s.getsockopt(41, 24) print("PMTU:%d" % pmtu) break s.close() Python program output after getting a ICMPV6_PKT_TOOBIG: [root@arch-fb-vm1 ~]# python2 ~/devshare/kernel/tasks/fib6/udp-connect-53-8080.py connected PMTU:1300 Cache routes after recieving TOOBIG: [root@arch-fb-vm1 ~]# ip -6 r show table cache 2fac:face::face via 2fac::face dev eth0 metric 0 cache expires 463sec mtu 1300 pref medium Client (Send the ICMPV6_PKT_TOOBIG): ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ scapy is used to generate the TOOBIG message. Here is the scapy script I have used: >>> p=Ether(src='da:75:4d:36:ac:32', dst='52:54:00:12:34:66', type=0x86dd)/IPv6(src='2fac::face', dst='2fac::1')/ICMPv6PacketTooBig(mtu=1300)/IPv6(src='2fac:: 1',dst='2fac:face::face', nh='UDP')/UDP(sport=8080,dport=53) >>> sendp(p, iface='qemubr0') Fixes: 45e4fd26683c ("ipv6: Only create RTF_CACHE routes after encountering pmtu exception") Signed-off-by: Martin KaFai Lau <kafai@fb.com> Reported-by: Wei Wang <weiwan@google.com> Cc: Cong Wang <xiyou.wangcong@gmail.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Wei Wang <weiwan@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-11net: vrf: Fix dst reference countingDavid Ahern
Vivek reported a kernel exception deleting a VRF with an active connection through it. The root cause is that the socket has a cached reference to a dst that is destroyed. Converting the dst_destroy to dst_release and letting proper reference counting kick in does not work as the dst has a reference to the device which needs to be released as well. I talked to Hannes about this at netdev and he pointed out the ipv4 and ipv6 dst handling has dst_ifdown for just this scenario. Rather than continuing with the reinvented dst wheel in VRF just remove it and leverage the ipv4 and ipv6 versions. Fixes: 193125dbd8eb2 ("net: Introduce VRF device driver") Fixes: 35402e3136634 ("net: Add IPv6 support to VRF device") Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-29ipv6: enforce flowi6_oif usage in ip6_dst_lookup_tail()Paolo Abeni
The current implementation of ip6_dst_lookup_tail basically ignore the egress ifindex match: if the saddr is set, ip6_route_output() purposefully ignores flowi6_oif, due to the commit d46a9d678e4c ("net: ipv6: Dont add RT6_LOOKUP_F_IFACE flag if saddr set"), if the saddr is 'any' the first route lookup in ip6_dst_lookup_tail fails, but upon failure a second lookup will be performed with saddr set, thus ignoring the ifindex constraint. This commit adds an output route lookup function variant, which allows the caller to specify lookup flags, and modify ip6_dst_lookup_tail() to enforce the ifindex match on the second lookup via said helper. ip6_route_output() becames now a static inline function build on top of ip6_route_output_flags(); as a side effect, out-of-tree modules need now a GPL license to access the output route lookup functionality. Signed-off-by: Paolo Abeni <pabeni@redhat.com> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Acked-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-17ipv6: allow routes to be configured with expire valuesXin Long
Add the support for adding expire value to routes, requested by Tom Gundersen <teg@jklm.no> for systemd-networkd, and NetworkManager wants it too. implement it by adding the new RTNETLINK attribute RTA_EXPIRES. Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: drivers/net/ethernet/renesas/ravb_main.c kernel/bpf/syscall.c net/ipv4/ipmr.c All three conflicts were cases of overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-01Revert "ipv6: ndisc: inherit metadata dst when creating ndisc requests"Nicolas Dichtel
This reverts commit ab450605b35caa768ca33e86db9403229bf42be4. In IPv6, we cannot inherit the dst of the original dst. ndisc packets are IPv6 packets and may take another route than the original packet. This patch breaks the following scenario: a packet comes from eth0 and is forwarded through vxlan1. The encapsulated packet triggers an NS which cannot be sent because of the wrong route. CC: Jiri Benc <jbenc@redhat.com> CC: Thomas Graf <tgraf@suug.ch> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-22net: IPv6 fib lookup tracepointDavid Ahern
Add tracepoint to show fib6 table lookups and result. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-15ipv6: Check rt->dst.from for the DST_NOCACHE routeMartin KaFai Lau
All DST_NOCACHE rt6_info used to have rt->dst.from set to its parent. After commit 8e3d5be73681 ("ipv6: Avoid double dst_free"), DST_NOCACHE is also set to rt6_info which does not have a parent (i.e. rt->dst.from is NULL). This patch catches the rt->dst.from == NULL case. Fixes: 8e3d5be73681 ("ipv6: Avoid double dst_free") Signed-off-by: Martin KaFai Lau <kafai@fb.com> Cc: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-15ipv6: Check expire on DST_NOCACHE routeMartin KaFai Lau
Since the expires of the DST_NOCACHE rt can be set during the ip6_rt_update_pmtu(), we also need to consider the expires value when doing ip6_dst_check(). This patches creates __rt6_check_expired() to only check the expire value (if one exists) of the current rt. In rt6_dst_from_check(), it adds __rt6_check_expired() as one of the condition check. Signed-off-by: Martin KaFai Lau <kafai@fb.com> Cc: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-15ipv6: Avoid creating RTF_CACHE from a rt that is not managed by fib6 treeMartin KaFai Lau
The original bug report: https://bugzilla.redhat.com/show_bug.cgi?id=1272571 The setup has a IPv4 GRE tunnel running in a IPSec. The bug happens when ndisc starts sending router solicitation at the gre interface. The simplified oops stack is like: __lock_acquire+0x1b2/0x1c30 lock_acquire+0xb9/0x140 _raw_write_lock_bh+0x3f/0x50 __ip6_ins_rt+0x2e/0x60 ip6_ins_rt+0x49/0x50 ~~~~~~~~ __ip6_rt_update_pmtu.part.54+0x145/0x250 ip6_rt_update_pmtu+0x2e/0x40 ~~~~~~~~ ip_tunnel_xmit+0x1f1/0xf40 __gre_xmit+0x7a/0x90 ipgre_xmit+0x15a/0x220 dev_hard_start_xmit+0x2bd/0x480 __dev_queue_xmit+0x696/0x730 dev_queue_xmit+0x10/0x20 neigh_direct_output+0x11/0x20 ip6_finish_output2+0x21f/0x770 ip6_finish_output+0xa7/0x1d0 ip6_output+0x56/0x190 ~~~~~~~~ ndisc_send_skb+0x1d9/0x400 ndisc_send_rs+0x88/0xc0 ~~~~~~~~ The rt passed to ip6_rt_update_pmtu() is created by icmp6_dst_alloc() and it is not managed by the fib6 tree, so its rt6i_table == NULL. When __ip6_rt_update_pmtu() creates a RTF_CACHE clone, the newly created clone also has rt6i_table == NULL and it causes the ip6_ins_rt() oops. During pmtu update, we only want to create a RTF_CACHE clone from a rt which is currently managed (or owned) by the fib6 tree. It means either rt->rt6i_node != NULL or rt is a RTF_PCPU clone. It is worth to note that rt6i_table may not be NULL even it is not (yet) managed by the fib6 tree (e.g. addrconf_dst_alloc()). Hence, rt6i_node is a better check instead of rt6i_table. Fixes: 45e4fd26683c ("ipv6: Only create RTF_CACHE routes after encountering pmtu") Signed-off-by: Martin KaFai Lau <kafai@fb.com> Reported-by: Chris Siebenmann <cks-rhbugzilla@cs.toronto.edu> Cc: Chris Siebenmann <cks-rhbugzilla@cs.toronto.edu> Cc: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Minor overlapping changes in net/ipv4/ipmr.c, in 'net' we were fixing the "BH-ness" of the counter bumps whilst in 'net-next' the functions were modified to take an explicit 'net' parameter. Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-02ipv6: fix crash on ICMPv6 redirects with prohibited/blackholed sourceMatthias Schiffer
There are other error values besides ip6_null_entry that can be returned by ip6_route_redirect(): fib6_rule_action() can also result in ip6_blk_hole_entry and ip6_prohibit_entry if such ip rules are installed. Only checking for ip6_null_entry in rt6_do_redirect() causes ip6_ins_rt() to be called with rt->rt6i_table == NULL in these cases, making the kernel crash. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: net/ipv6/xfrm6_output.c net/openvswitch/flow_netlink.c net/openvswitch/vport-gre.c net/openvswitch/vport-vxlan.c net/openvswitch/vport.c net/openvswitch/vport.h The openvswitch conflicts were overlapping changes. One was the egress tunnel info fix in 'net' and the other was the vport ->send() op simplification in 'net-next'. The xfrm6_output.c conflicts was also a simplification overlapping a bug fix. Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-22net: ipv6: Dont add RT6_LOOKUP_F_IFACE flag if saddr setDavid Ahern
741a11d9e410 ("net: ipv6: Add RT6_LOOKUP_F_IFACE flag if oif is set") adds the RT6_LOOKUP_F_IFACE flag to make device index mismatch fatal if oif is given. Hajime reported that this change breaks the Mobile IPv6 use case that wants to force the message through one interface yet use the source address from another interface. Handle this case by only adding the flag if oif is set and saddr is not set. Fixes: 741a11d9e410 ("net: ipv6: Add RT6_LOOKUP_F_IFACE flag if oif is set") Cc: Hajime Tazaki <thehajime@gmail.com> Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-21net: Really fix vti6 with oif in dst lookupsDavid Ahern
6e28b000825d ("net: Fix vti use case with oif in dst lookups for IPv6") is missing the checks on FLOWI_FLAG_SKIP_NH_OIF. Add them. Fixes: 42a7b32b73d6 ("xfrm: Add oif to dst lookups") Cc: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Acked-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.0.4) at 2024-05-24 01:32:26 +0000