summaryrefslogtreecommitdiff
path: root/net/mac80211
AgeCommit message (Collapse)Author
2018-10-10mac80211: correct use of IEEE80211_VHT_CAP_RXSTBC_XDanek Duvall
[ Upstream commit 67d1ba8a6dc83d90cd58b89fa6cbf9ae35a0cf7f ] The mod mask for VHT capabilities intends to say that you can override the number of STBC receive streams, and it does, but only by accident. The IEEE80211_VHT_CAP_RXSTBC_X aren't bits to be set, but values (albeit left-shifted). ORing the bits together gets the right answer, but we should use the _MASK macro here instead. Signed-off-by: Danek Duvall <duvall@comfychair.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-10mac80211: Run TXQ teardown code before de-registering interfacesToke Høiland-Jørgensen
[ Upstream commit 77cfaf52eca5cac30ed029507e0cab065f888995 ] The TXQ teardown code can reference the vif data structures that are stored in the netdev private memory area if there are still packets on the queue when it is being freed. Since the TXQ teardown code is run after the netdevs are freed, this can lead to a use-after-free. Fix this by moving the TXQ teardown code to earlier in ieee80211_unregister_hw(). Reported-by: Ben Greear <greearb@candelatech.com> Tested-by: Ben Greear <greearb@candelatech.com> Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-26mac80211: restrict delayed tailroom needed decrementManikanta Pubbisetty
[ Upstream commit 133bf90dbb8b873286f8ec2e81ba26e863114b8c ] As explained in ieee80211_delayed_tailroom_dec(), during roam, keys of the old AP will be destroyed and new keys will be installed. Deletion of the old key causes crypto_tx_tailroom_needed_cnt to go from 1 to 0 and the new key installation causes a transition from 0 to 1. Whenever crypto_tx_tailroom_needed_cnt transitions from 0 to 1, we invoke synchronize_net(); the reason for doing this is to avoid a race in the TX path as explained in increment_tailroom_need_count(). This synchronize_net() operation can be slow and can affect the station roam time. To avoid this, decrementing the crypto_tx_tailroom_needed_cnt is delayed for a while so that upon installation of new key the transition would be from 1 to 2 instead of 0 to 1 and thereby improving the roam time. This is all correct for a STA iftype, but deferring the tailroom_needed decrement for other iftypes may be unnecessary. For example, let's consider the case of a 4-addr client connecting to an AP for which AP_VLAN interface is also created, let the initial value for tailroom_needed on the AP be 1. * 4-addr client connects to the AP (AP: tailroom_needed = 1) * AP will clear old keys, delay decrement of tailroom_needed count * AP_VLAN is created, it takes the tailroom count from master (AP_VLAN: tailroom_needed = 1, AP: tailroom_needed = 1) * Install new key for the station, assume key is plumbed in the HW, there won't be any change in tailroom_needed count on AP iface * Delayed decrement of tailroom_needed count on AP (AP: tailroom_needed = 0, AP_VLAN: tailroom_needed = 1) Because of the delayed decrement on AP iface, tailroom_needed count goes out of sync between AP(master iface) and AP_VLAN(slave iface) and there would be unnecessary tailroom created for the packets going through AP_VLAN iface. Also, WARN_ONs were observed while trying to bring down the AP_VLAN interface: (warn_slowpath_common) (warn_slowpath_null+0x18/0x20) (warn_slowpath_null) (ieee80211_free_keys+0x114/0x1e4) (ieee80211_free_keys) (ieee80211_del_virtual_monitor+0x51c/0x850) (ieee80211_del_virtual_monitor) (ieee80211_stop+0x30/0x3c) (ieee80211_stop) (__dev_close_many+0x94/0xb8) (__dev_close_many) (dev_close_many+0x5c/0xc8) Restricting delayed decrement to station interface alone fixes the problem and it makes sense to do so because delayed decrement is done to improve roam time which is applicable only for client devices. Signed-off-by: Manikanta Pubbisetty <mpubbise@codeaurora.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-05mac80211: add stations tied to AP_VLANs during hw reconfigmpubbise@codeaurora.org
[ Upstream commit 19103a4bfb42f320395daa5616ece3e89e759d63 ] As part of hw reconfig, only stations linked to AP interfaces are added back to the driver ignoring those which are tied to AP_VLAN interfaces. It is true that there could be stations tied to the AP_VLAN interface while serving 4addr clients or when using AP_VLAN for VLAN operations; we should be adding these stations back to the driver as part of hw reconfig, failing to do so can cause functional issues. In the case of ath10k driver, the following errors were observed. ath10k_pci : failed to install key for non-existent peer XX:XX:XX:XX:XX:XX Workqueue: events_freezable ieee80211_restart_work [mac80211] (unwind_backtrace) from (show_stack+0x10/0x14) (show_stack) (dump_stack+0x80/0xa0) (dump_stack) (warn_slowpath_common+0x68/0x8c) (warn_slowpath_common) (warn_slowpath_null+0x18/0x20) (warn_slowpath_null) (ieee80211_enable_keys+0x88/0x154 [mac80211]) (ieee80211_enable_keys) (ieee80211_reconfig+0xc90/0x19c8 [mac80211]) (ieee80211_reconfig]) (ieee80211_restart_work+0x8c/0xa0 [mac80211]) (ieee80211_restart_work) (process_one_work+0x284/0x488) (process_one_work) (worker_thread+0x228/0x360) (worker_thread) (kthread+0xd8/0xec) (kthread) (ret_from_fork+0x14/0x24) Also while bringing down the AP VAP, WARN_ONs and errors related to peer removal were observed. ath10k_pci : failed to clear all peer wep keys for vdev 0: -2 ath10k_pci : failed to disassociate station: 8c:fd:f0:0a:8c:f5 vdev 0: -2 (unwind_backtrace) (show_stack+0x10/0x14) (show_stack) (dump_stack+0x80/0xa0) (dump_stack) (warn_slowpath_common+0x68/0x8c) (warn_slowpath_common) (warn_slowpath_null+0x18/0x20) (warn_slowpath_null) (sta_set_sinfo+0xb98/0xc9c [mac80211]) (sta_set_sinfo [mac80211]) (__sta_info_flush+0xf0/0x134 [mac80211]) (__sta_info_flush [mac80211]) (ieee80211_stop_ap+0xe8/0x390 [mac80211]) (ieee80211_stop_ap [mac80211]) (__cfg80211_stop_ap+0xe0/0x3dc [cfg80211]) (__cfg80211_stop_ap [cfg80211]) (cfg80211_stop_ap+0x30/0x44 [cfg80211]) (cfg80211_stop_ap [cfg80211]) (genl_rcv_msg+0x274/0x30c) (genl_rcv_msg) (netlink_rcv_skb+0x58/0xac) (netlink_rcv_skb) (genl_rcv+0x20/0x34) (genl_rcv) (netlink_unicast+0x11c/0x204) (netlink_unicast) (netlink_sendmsg+0x30c/0x370) (netlink_sendmsg) (sock_sendmsg+0x70/0x84) (sock_sendmsg) (___sys_sendmsg.part.3+0x188/0x228) (___sys_sendmsg.part.3) (__sys_sendmsg+0x4c/0x70) (__sys_sendmsg) (ret_fast_syscall+0x0/0x44) These issues got fixed by adding the stations which are tied to AP_VLANs back to the driver. Signed-off-by: Manikanta Pubbisetty <mpubbise@codeaurora.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-06-21mac80211: use timeout from the AddBA response instead of the requestSara Sharon
[ Upstream commit 914eac248d876f9c00cd1792ffec3d182c863f13 ] 2016 spec, section 10.24.2 specifies that the block ack timeout in the ADD BA request is advisory. That means we should check the value in the response and act upon it (same as buffer size). Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-06-21mac80211: Adjust SAE authentication timeoutIlan Peer
[ Upstream commit 407879b690ba3a6bf29be896d02dad63463bd1c0 ] The IEEE P802.11-REVmd D1.0 specification updated the SAE authentication timeout to be 2000 milliseconds (see dot11RSNASAERetransPeriod). Update the SAE timeout setting accordingly. While at it, reduce some code duplication in the timeout configuration. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-30mac80211: drop frames with unexpected DS bits from fast-rx to slow pathFelix Fietkau
[ Upstream commit b323ac19b7734a1c464b2785a082ee50bccd3b91 ] Fixes rx for 4-addr packets in AP mode. These may be used for setting up a 4-addr link for stations that are allowed to do so. Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-30mac80211: Fix sending ADDBA response for an ongoing sessionIlan Peer
[ Upstream commit 3b07029729e347f288c70227cfe3c66b085d6b0b ] In case an ADDBA request is received while there is already an ongoing BA sessions with the same parameters, i.e., update flow, an ADBBA response with decline status was sent twice. Fix it. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-30mac80211: Do not disconnect on invalid operating classIlan Peer
[ Upstream commit 191da271ac260700db3e5b4bb982a17ca78769d6 ] Some APs include a non global operating class in their extended channel switch information element. In such a case, as the operating class is not known, mac80211 would decide to disconnect. However the specification states that the operating class needs to be taken from Annex E, but it does not specify from which table it should be taken, so it is valid for an AP to use a non global operating class. To avoid possibly unneeded disconnection, in such a case ignore the operating class and assume that the current band is used, and if the resulting channel and band configuration is invalid disconnect. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-30mac80211: fix calling sleeping function in atomic contextSara Sharon
[ Upstream commit 95f3ce6a77893ac828ba841df44421620de4314b ] sta_info_alloc can be called from atomic paths (such as RX path) so we need to call pcpu_alloc with the correct gfp. Fixes: c9c5962b56c1 ("mac80211: enable collecting station statistics per-CPU") Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-30mac80211: fix a possible leak of station statsSara Sharon
[ Upstream commit d78d9ee9d40aca4781d2c5334972544601a4c3a2 ] If sta_info_alloc fails after allocating the per CPU statistics, they are not properly freed. Fixes: c9c5962b56c1 ("mac80211: enable collecting station statistics per-CPU") Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-30mac80211: mesh: fix wrong mesh TTL offset calculationPeter Oh
[ Upstream commit c4de37ee2b55deac7d6aeac33e02e3d6be243898 ] mesh TTL offset in Mesh Channel Switch Parameters element depends on not only Secondary Channel Offset element, but also affected by HT Control field and Wide Bandwidth Channel Switch element. So use element structure to manipulate mesh channel swich param IE after removing its constant attribution to correct the miscalculation. Signed-off-by: Peter Oh <peter.oh@bowerswilkins.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-12mac80211: Fix setting TX power on monitor interfacesPeter Große
[ Upstream commit 3a3713ec360138f806c6fc368d1de570f692b347 ] Instead of calling ieee80211_recalc_txpower on monitor interfaces directly, call it using the virtual monitor interface, if one exists. In case of a single monitor interface given, reject setting TX power, if no virtual monitor interface exists. That being checked, don't warn in ieee80211_bss_info_change_notify, after setting TX power on a monitor interface. Fixes warning: ------------[ cut here ]------------ WARNING: CPU: 0 PID: 2193 at net/mac80211/driver-ops.h:167 ieee80211_bss_info_change_notify+0x111/0x190 Modules linked in: uvcvideo videobuf2_vmalloc videobuf2_memops videobuf2_v4l2 videobuf2_core rndis_host cdc_ether usbnet mii tp_smapi(O) thinkpad_ec(O) ohci_hcd vboxpci(O) vboxnetadp(O) vboxnetflt(O) v boxdrv(O) x86_pkg_temp_thermal kvm_intel kvm irqbypass iwldvm iwlwifi ehci_pci ehci_hcd tpm_tis tpm_tis_core tpm CPU: 0 PID: 2193 Comm: iw Tainted: G O 4.12.12-gentoo #2 task: ffff880186fd5cc0 task.stack: ffffc90001b54000 RIP: 0010:ieee80211_bss_info_change_notify+0x111/0x190 RSP: 0018:ffffc90001b57a10 EFLAGS: 00010246 RAX: 0000000000000006 RBX: ffff8801052ce840 RCX: 0000000000000064 RDX: 00000000fffffffc RSI: 0000000000040000 RDI: ffff8801052ce840 RBP: ffffc90001b57a38 R08: 0000000000000062 R09: 0000000000000000 R10: ffff8802144b5000 R11: ffff880049dc4614 R12: 0000000000040000 R13: 0000000000000064 R14: ffff8802105f0760 R15: ffffc90001b57b48 FS: 00007f92644b4580(0000) GS:ffff88021e200000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f9263c109f0 CR3: 00000001df850000 CR4: 00000000000406f0 Call Trace: ieee80211_recalc_txpower+0x33/0x40 ieee80211_set_tx_power+0x40/0x180 nl80211_set_wiphy+0x32e/0x950 Reported-by: Peter Große <pegro@friiks.de> Signed-off-by: Peter Große <pegro@friiks.de> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-19mac80211: remove BUG() when interface type is invalidLuca Coelho
[ Upstream commit c7976f5272486e4ff406014c4b43e2fa3b70b052 ] In the ieee80211_setup_sdata() we check if the interface type is valid and, if not, call BUG(). This should never happen, but if there is something wrong with the code, it will not be caught until the bug happens when an interface is being set up. Calling BUG() is too extreme for this and a WARN_ON() would be better used instead. Change that. Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-03mac80211: mesh: drop frames appearing to be from usJohannes Berg
[ Upstream commit 736a80bbfda709fb3631f5f62056f250a38e5804 ] If there are multiple mesh stations with the same MAC address, they will both get confused and start throwing warnings. Obviously in this case nothing can actually work anyway, so just drop frames that look like they're from ourselves early on. Reported-by: Gui Iribarren <gui@altermundi.net> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-28cfg80211: fix cfg80211_beacon_dupArnd Bergmann
commit bee92d06157fc39d5d7836a061c7d41289a55797 upstream. gcc-8 warns about some obviously incorrect code: net/mac80211/cfg.c: In function 'cfg80211_beacon_dup': net/mac80211/cfg.c:2896:3: error: 'memcpy' source argument is the same as destination [-Werror=restrict] From the context, I conclude that we want to copy from beacon into new_beacon, as we do in the rest of the function. Cc: stable@vger.kernel.org Fixes: 73da7d5bab79 ("mac80211: add channel switch command and beacon callbacks") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-03mac80211: fix the update of path metric for RANN frameChun-Yeow Yeoh
[ Upstream commit fbbdad5edf0bb59786a51b94a9d006bc8c2da9a2 ] The previous path metric update from RANN frame has not considered the own link metric toward the transmitting mesh STA. Fix this. Reported-by: Michael65535 Signed-off-by: Chun-Yeow Yeoh <yeohchunyeow@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-03mac80211: use QoS NDP for AP probingJohannes Berg
[ Upstream commit 7b6ddeaf27eca72795ceeae2f0f347db1b5f9a30 ] When connected to a QoS/WMM AP, mac80211 should use a QoS NDP for probing it, instead of a regular non-QoS one, fix this. Change all the drivers to *not* allow QoS NDP for now, even though it looks like most of them should be OK with that. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02Merge tag 'spdx_identifiers-4.14-rc8' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull initial SPDX identifiers from Greg KH: "License cleanup: add SPDX license identifiers to some files Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>" * tag 'spdx_identifiers-4.14-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: License cleanup: add SPDX license identifier to uapi header files with a license License cleanup: add SPDX license identifier to uapi header files with no license License cleanup: add SPDX GPL-2.0 license identifier to files with no license
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-25mac80211: don't compare TKIP TX MIC key in reinstall preventionJohannes Berg
For the reinstall prevention, the code I had added compares the whole key. It turns out though that iwlwifi firmware doesn't provide the TKIP TX MIC key as it's not needed in client mode, and thus the comparison will always return false. For client mode, thus always zero out the TX MIC key part before doing the comparison in order to avoid accepting the reinstall of the key with identical encryption and RX MIC key, but not the same TX MIC key (since the supplicant provides the real one.) Fixes: fdf7cb4185b6 ("mac80211: accept key reinstall without changing anything") Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-10-18mac80211: validate user rate mask before configuring driverJohannes Berg
Ben reported that when the user rate mask is rejected for not matching any basic rate, the driver had already been configured. This is clearly an oversight in my original change, fix this by doing the validation before calling the driver. Reported-by: Ben Greear <greearb@candelatech.com> Fixes: e8e4f5280ddd ("mac80211: reject/clear user rate mask if not usable") Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-10-18mac80211: use constant time comparison with keysJason A. Donenfeld
Otherwise we risk leaking information via timing side channel. Fixes: fdf7cb4185b6 ("mac80211: accept key reinstall without changing anything") Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-10-16mac80211: accept key reinstall without changing anythingJohannes Berg
When a key is reinstalled we can reset the replay counters etc. which can lead to nonce reuse and/or replay detection being impossible, breaking security properties, as described in the "KRACK attacks". In particular, CVE-2017-13080 applies to GTK rekeying that happened in firmware while the host is in D3, with the second part of the attack being done after the host wakes up. In this case, the wpa_supplicant mitigation isn't sufficient since wpa_supplicant doesn't know the GTK material. In case this happens, simply silently accept the new key coming from userspace but don't take any action on it since it's the same key; this keeps the PN replay counters intact. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-09-06mac80211: fix deadlock in driver-managed RX BA session startJohannes Berg
When an RX BA session is started by the driver, and it has to tell mac80211 about it, the corresponding bit in tid_rx_manage_offl gets set and the BA session work is scheduled. Upon testing this bit, it will call __ieee80211_start_rx_ba_session(), thus deadlocking as it already holds the ampdu_mlme.mtx, which that acquires again. Fix this by adding ___ieee80211_start_rx_ba_session(), a version of the function that requires the mutex already held. Cc: stable@vger.kernel.org Fixes: 699cb58c8a52 ("mac80211: manage RX BA session offload without SKB queue") Reported-by: Matteo Croce <mcroce@redhat.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-09-06mac80211: Complete ampdu work schedule during session tear downIlan peer
Commit 7a7c0a6438b8 ("mac80211: fix TX aggregation start/stop callback race") added a cancellation of the ampdu work after the loop that stopped the Tx and Rx BA sessions. However, in some cases, e.g., during HW reconfig, the low level driver might call mac80211 APIs to complete the stopping of the BA sessions, which would queue the ampdu work to handle the actual completion. This work needs to be performed as otherwise mac80211 data structures would not be properly synced. Fix this by checking if BA session STOP_CB bit is set after the BA session cancellation and properly clean the session. Signed-off-by: Ilan Peer <ilan.peer@intel.com> [Johannes: the work isn't flushed because that could do other things we don't want, and the locking situation isn't clear] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-09-05mac80211: flush hw_roc_start work before cancelling the ROCAvraham Stern
When HW ROC is supported it is possible that after the HW notified that the ROC has started, the ROC was cancelled and another ROC was added while the hw_roc_start worker is waiting on the mutex (since cancelling the ROC and adding another one also holds the same mutex). As a result, the hw_roc_start worker will continue to run after the new ROC is added but before it is actually started by the HW. This may result in notifying userspace that the ROC has started before it actually does, or in case of management tx ROC, in an attempt to tx while not on the right channel. In addition, when the driver will notify mac80211 that the second ROC has started, mac80211 will warn that this ROC has already been notified. Fix this by flushing the hw_roc_start work before cancelling an ROC. Cc: stable@vger.kernel.org Signed-off-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-09-05mac80211: agg-tx: call drv_wake_tx_queue in proper contextJohannes Berg
Since drv_wake_tx_queue() is normally called in the TX path, which is already in an RCU critical section, we should call it the same way in the aggregation code path, so if the driver expects to be able to use RCU, it'll already be protected without having to enter a nested critical section. Additionally, disable soft-IRQs, since not doing so could cause issues in a driver that relies on them already being disabled like in the other path. Fixes: ba8c3d6f16a1 ("mac80211: add an intermediate software queue implementation") Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-09-05mac80211: Fix null pointer dereference with iTXQ supportChunho Lee
This change adds null pointer check before dereferencing pointer dev on netif_tx_start_all_queues() when an interface is added. With iTXQ support, netif_tx_start_all_queues() is always called while an interface is added. however, the netdev queues are not associated and dev is null when the interface is either NL80211_IFTYPE_P2P_DEVICE or NL80211_IFTYPE_NAN. Signed-off-by: Chunho Lee <ch.lee@newracom.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-09-05mac80211: add MESH IE in the correct orderLiad Kaufman
VHT MESH support was added, but the order of the IEs wasn't enforced. Fix that. Signed-off-by: Liad Kaufman <liad.kaufman@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-09-05mac80211: shorten debug prints using ht_dbg() to avoid warningSharon Dvir
Invoking ht_dbg() with too long of a string will print a warning. Shorten the messages while retaining the printed patameters. Signed-off-by: Sharon Dvir <sharon.dvir@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-09-05mac80211: fix VLAN handling with TXQsJohannes Berg
With TXQs, the AP_VLAN interfaces are resolved to their owner AP interface when enqueuing the frame, which makes sense since the frame really goes out on that as far as the driver is concerned. However, this introduces a problem: frames to be encrypted with a VLAN-specific GTK will now be encrypted with the AP GTK, since the information about which virtual interface to use to select the key is taken from the TXQ. Fix this by preserving info->control.vif and using that in the dequeue function. This now requires doing the driver-mapping in the dequeue as well. Since there's no way to filter the frames that are sitting on a TXQ, drop all frames, which may affect other interfaces, when an AP_VLAN is removed. Cc: stable@vger.kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-09-05mac80211: fix incorrect assignment of reassoc valueSimon Dinkin
this fix minor issue in the log message. in ieee80211_rx_mgmt_assoc_resp function, when assigning the reassoc value from the mgmt frame control: ieee80211_is_reassoc_resp function need to be used, instead of ieee80211_is_reassoc_req function. Signed-off-by: Simon Dinkin <simon.dinkin@tandemg.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-08-09mac80211: add api to start ba session timer expired flowNaftali Goldstein
Some drivers handle rx buffer reordering internally (and by extension handle also the rx ba session timer internally), but do not ofload the addba/delba negotiation. Add an api for these drivers to properly tear-down the ba session, including sending a delba. Signed-off-by: Naftali Goldstein <naftali.goldstein@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-06-20net: manual clean code which call skb_put_[data:zero]yuan linyu
Signed-off-by: yuan linyu <Linyu.Yuan@alcatel-sbell.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-16networking: make skb_push & __skb_push return void pointersJohannes Berg
It seems like a historic accident that these return unsigned char *, and in many places that means casts are required, more often than not. Make these functions return void * and remove all the casts across the tree, adding a (u8 *) cast only where the unsigned char pointer was used directly, all done with the following spatch: @@ expression SKB, LEN; typedef u8; identifier fn = { skb_push, __skb_push, skb_push_rcsum }; @@ - *(fn(SKB, LEN)) + *(u8 *)fn(SKB, LEN) @@ expression E, SKB, LEN; identifier fn = { skb_push, __skb_push, skb_push_rcsum }; type T; @@ - E = ((T *)(fn(SKB, LEN))) + E = fn(SKB, LEN) @@ expression SKB, LEN; identifier fn = { skb_push, __skb_push, skb_push_rcsum }; @@ - fn(SKB, LEN)[0] + *(u8 *)fn(SKB, LEN) Note that the last part there converts from push(...)[0] to the more idiomatic *(u8 *)push(...). Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-16networking: make skb_put & friends return void pointersJohannes Berg
It seems like a historic accident that these return unsigned char *, and in many places that means casts are required, more often than not. Make these functions (skb_put, __skb_put and pskb_put) return void * and remove all the casts across the tree, adding a (u8 *) cast only where the unsigned char pointer was used directly, all done with the following spatch: @@ expression SKB, LEN; typedef u8; identifier fn = { skb_put, __skb_put }; @@ - *(fn(SKB, LEN)) + *(u8 *)fn(SKB, LEN) @@ expression E, SKB, LEN; identifier fn = { skb_put, __skb_put }; type T; @@ - E = ((T *)(fn(SKB, LEN))) + E = fn(SKB, LEN) which actually doesn't cover pskb_put since there are only three users overall. A handful of stragglers were converted manually, notably a macro in drivers/isdn/i4l/isdn_bsdcomp.c and, oddly enough, one of the many instances in net/bluetooth/hci_sock.c. In the former file, I also had to fix one whitespace problem spatch introduced. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-16networking: introduce and use skb_put_data()Johannes Berg
A common pattern with skb_put() is to just want to memcpy() some data into the new space, introduce skb_put_data() for this. An spatch similar to the one for skb_put_zero() converts many of the places using it: @@ identifier p, p2; expression len, skb, data; type t, t2; @@ ( -p = skb_put(skb, len); +p = skb_put_data(skb, data, len); | -p = (t)skb_put(skb, len); +p = skb_put_data(skb, data, len); ) ( p2 = (t2)p; -memcpy(p2, data, len); | -memcpy(p, data, len); ) @@ type t, t2; identifier p, p2; expression skb, data; @@ t *p; ... ( -p = skb_put(skb, sizeof(t)); +p = skb_put_data(skb, data, sizeof(t)); | -p = (t *)skb_put(skb, sizeof(t)); +p = skb_put_data(skb, data, sizeof(t)); ) ( p2 = (t2)p; -memcpy(p2, data, sizeof(*p)); | -memcpy(p, data, sizeof(*p)); ) @@ expression skb, len, data; @@ -memcpy(skb_put(skb, len), data, len); +skb_put_data(skb, data, len); (again, manually post-processed to retain some comments) Reviewed-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-16networking: convert many more places to skb_put_zero()Johannes Berg
There were many places that my previous spatch didn't find, as pointed out by yuan linyu in various patches. The following spatch found many more and also removes the now unnecessary casts: @@ identifier p, p2; expression len; expression skb; type t, t2; @@ ( -p = skb_put(skb, len); +p = skb_put_zero(skb, len); | -p = (t)skb_put(skb, len); +p = skb_put_zero(skb, len); ) ... when != p ( p2 = (t2)p; -memset(p2, 0, len); | -memset(p, 0, len); ) @@ type t, t2; identifier p, p2; expression skb; @@ t *p; ... ( -p = skb_put(skb, sizeof(t)); +p = skb_put_zero(skb, sizeof(t)); | -p = (t *)skb_put(skb, sizeof(t)); +p = skb_put_zero(skb, sizeof(t)); ) ... when != p ( p2 = (t2)p; -memset(p2, 0, sizeof(*p)); | -memset(p, 0, sizeof(*p)); ) @@ expression skb, len; @@ -memset(skb_put(skb, len), 0, len); +skb_put_zero(skb, len); Apply it to the tree (with one manual fixup to keep the comment in vxlan.c, which spatch removed.) Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
The conflicts were two cases of overlapping changes in batman-adv and the qed driver. Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-13Merge tag 'mac80211-for-davem-2017-06-13' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes Berg says: ==================== Some fixes: * Avi fixes some fallout from my mac80211 RX flags changes * Emmanuel fixes an issue with adhering to the spec, and an oversight in the SMPS management code * Jason's patch makes mac80211 use constant-time memory comparisons for message authentication, to avoid having potentially observable timing differences * my fix makes mac80211 set the basic rates bitmap before the channel so the next update to the driver has more consistent data - this required another rework patch to remove some useless 5/10 MHz code that can never be hit ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-13mac80211: add the action to the drv_ampdu_action tracepointEmmanuel Grumbach
It is very useful to know what ampdu action is currently happening. Add this information to the tracepoint. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-06-13mac80211: don't send SMPS action frame in AP mode when not neededEmmanuel Grumbach
mac80211 allows to modify the SMPS state of an AP both, when it is started, and after it has been started. Such a change will trigger an action frame to all the peers that are currently connected, and will be remembered so that new peers will get notified as soon as they connect (since the SMPS setting in the beacon may not be the right one). This means that we need to remember the SMPS state currently requested as well as the SMPS state that was configured initially (and advertised in the beacon). The former is bss->req_smps and the latter is sdata->smps_mode. Initially, the AP interface could only be started with SMPS_OFF, which means that sdata->smps_mode was SMPS_OFF always. Later, a nl80211 API was added to be able to start an AP with a different AP mode. That code forgot to update bss->req_smps and because of that, if the AP interface was started with SMPS_DYNAMIC, we had: sdata->smps_mode = SMPS_DYNAMIC bss->req_smps = SMPS_OFF That configuration made mac80211 think it needs to fire off an action frame to any new station connecting to the AP in order to let it know that the actual SMPS configuration is SMPS_OFF. Fix that by properly setting bss->req_smps in ieee80211_start_ap. Fixes: f69931748730 ("mac80211: set smps_mode according to ap params") Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-06-13mac80211/wpa: use constant time memory comparison for MACsJason A. Donenfeld
Otherwise, we enable all sorts of forgeries via timing attack. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: linux-wireless@vger.kernel.org Cc: stable@vger.kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-06-13mac80211: set bss_info data before configuring the channelJohannes Berg
When mac80211 changes the channel, it also calls into the driver's bss_info_changed() callback, e.g. with BSS_CHANGED_IDLE. The driver may, like iwlwifi does, access more data from bss_info in that case and iwlwifi accesses the basic_rates bitmap, but if changing from a band with more (basic) rates to one with fewer, an out-of-bounds access of the rate array may result. While we can't avoid having invalid data at some point in time, we can avoid having it while we call the driver - so set up all the data before configuring the channel, and then apply it afterwards. This fixes https://bugzilla.kernel.org/show_bug.cgi?id=195677 Reported-by: Johannes Hirte <johannes.hirte@datenkhaos.de> Tested-by: Johannes Hirte <johannes.hirte@datenkhaos.de> Debugged-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-06-13mac80211: remove 5/10 MHz rate code from station MLMEJohannes Berg
There's no need for the station MLME code to handle bitrates for 5 or 10 MHz channels when it can't ever create such a configuration. Remove the unnecessary code. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-06-13mac80211: Fix incorrect condition when checking rx timestampAvraham Stern
If the driver reports the rx timestamp at PLCP start, mac80211 can only handle legacy encoding, but the code checks that the encoding is not legacy. Fix this. Fixes: da6a4352e7c8 ("mac80211: separate encoding/bandwidth from flags") Signed-off-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-06-13mac80211: don't look at the PM bit of BAR framesEmmanuel Grumbach
When a peer sends a BAR frame with PM bit clear, we should not modify its PM state as madated by the spec in 802.11-20012 10.2.1.2. Cc: stable@vger.kernel.org Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-06-09mac80211: free netdev on dev_alloc_name() errorJohannes Berg
The change to remove free_netdev() from ieee80211_if_free() erroneously didn't add the necessary free_netdev() for when ieee80211_if_free() is called directly in one place, rather than as the priv_destructor. Add the missing call. Fixes: cf124db566e6 ("net: Fix inconsistent teardown and release of private netdev state.") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-08mac80211: manage RX BA session offload without SKB queueJohannes Berg
Instead of using the SKB queue with the fake pkt_type for the offloaded RX BA session management, also handle this with the normal aggregation state machine worker. This also makes the use of this more reliable since it gets rid of the allocation of the fake skb. Combined with the previous patch, this finally allows us to get rid of the pkt_type hack entirely, so do that as well. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
generated by cgit v1.2.3 (git 2.0.4) at 2024-05-12 01:17:35 +0000