summaryrefslogtreecommitdiff
path: root/net/mac80211
AgeCommit message (Collapse)Author
2019-12-05mac80211: fix station inactive_time shortly after bootAhmed Zaki
[ Upstream commit 285531f9e6774e3be71da6673d475ff1a088d675 ] In the first 5 minutes after boot (time of INITIAL_JIFFIES), ieee80211_sta_last_active() returns zero if last_ack is zero. This leads to "inactive time" showing jiffies_to_msecs(jiffies). # iw wlan0 station get fc:ec:da:64:a6:dd Station fc:ec:da:64:a6:dd (on wlan0) inactive time: 4294894049 ms . . connected time: 70 seconds Fix by returning last_rx if last_ack == 0. Signed-off-by: Ahmed Zaki <anzaki@gmail.com> Link: https://lore.kernel.org/r/20191031121243.27694-1-anzaki@gmail.com Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-11-24mac80211: minstrel: fix sampling/reporting of CCK rates in HT modeFelix Fietkau
[ Upstream commit 972b66b86f85f4e8201db454f4c3e9d990cf9836 ] Long/short preamble selection cannot be sampled separately, since it depends on the BSS state. Because of that, sampling attempts to currently not used preamble modes are not counted in the statistics, which leads to CCK rates being sampled too often. Fix statistics accounting for long/short preamble by increasing the index where necessary. Fix excessive CCK rate sampling by dropping unsupported sample attempts. This improves throughput on 2.4 GHz channels Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-11-24mac80211: minstrel: fix CCK rate group streams valueFelix Fietkau
[ Upstream commit 80df9be67c44cb636bbc92caeddad8caf334c53c ] Fixes a harmless underflow issue when CCK rates are actively being used Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-11-24mac80211: minstrel: fix using short preamble CCK rates on HT clientsFelix Fietkau
[ Upstream commit 37439f2d6e43ae79e22be9be159f0af157468f82 ] mi->supported[MINSTREL_CCK_GROUP] needs to be updated short preamble rates need to be marked as supported regardless of whether it's currently enabled. Its state can change at any time without a rate_update call. Fixes: 782dda00ab8e ("mac80211: minstrel_ht: move short preamble check out of get_rate") Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-10-29mac80211: Reject malformed SSID elementsWill Deacon
commit 4152561f5da3fca92af7179dd538ea89e248f9d0 upstream. Although this shouldn't occur in practice, it's a good idea to bounds check the length field of the SSID element prior to using it for things like allocations or memcpy operations. Cc: <stable@vger.kernel.org> Cc: Kees Cook <keescook@chromium.org> Reported-by: Nicolas Waisman <nico@semmle.com> Signed-off-by: Will Deacon <will@kernel.org> Link: https://lore.kernel.org/r/20191004095132.15777-1-will@kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-29mac80211: fix txq null pointer dereferenceMiaoqing Pan
[ Upstream commit 8ed31a264065ae92058ce54aa3cc8da8d81dc6d7 ] If the interface type is P2P_DEVICE or NAN, read the file of '/sys/kernel/debug/ieee80211/phyx/netdev:wlanx/aqm' will get a NULL pointer dereference. As for those interface type, the pointer sdata->vif.txq is NULL. Unable to handle kernel NULL pointer dereference at virtual address 00000011 CPU: 1 PID: 30936 Comm: cat Not tainted 4.14.104 #1 task: ffffffc0337e4880 task.stack: ffffff800cd20000 PC is at ieee80211_if_fmt_aqm+0x34/0xa0 [mac80211] LR is at ieee80211_if_fmt_aqm+0x34/0xa0 [mac80211] [...] Process cat (pid: 30936, stack limit = 0xffffff800cd20000) [...] [<ffffff8000b7cd00>] ieee80211_if_fmt_aqm+0x34/0xa0 [mac80211] [<ffffff8000b7c414>] ieee80211_if_read+0x60/0xbc [mac80211] [<ffffff8000b7ccc4>] ieee80211_if_read_aqm+0x28/0x30 [mac80211] [<ffffff80082eff94>] full_proxy_read+0x2c/0x48 [<ffffff80081eef00>] __vfs_read+0x2c/0xd4 [<ffffff80081ef084>] vfs_read+0x8c/0x108 [<ffffff80081ef494>] SyS_read+0x40/0x7c Signed-off-by: Miaoqing Pan <miaoqing@codeaurora.org> Acked-by: Toke Høiland-Jørgensen <toke@redhat.com> Link: https://lore.kernel.org/r/1569549796-8223-1-git-send-email-miaoqing@codeaurora.org [trim useless data from commit message] Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-09-06mac80211: fix possible sta leakJohannes Berg
commit 5fd2f91ad483baffdbe798f8a08f1b41442d1e24 upstream. If TDLS station addition is rejected, the sta memory is leaked. Avoid this by moving the check before the allocation. Cc: stable@vger.kernel.org Fixes: 7ed5285396c2 ("mac80211: don't initiate TDLS connection if station is not associated to AP") Link: https://lore.kernel.org/r/20190801073033.7892-1-johannes@sipsolutions.net Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-08-16mac80211: don't WARN on short WMM parameters from APBrian Norris
commit 05aaa5c97dce4c10a9e7eae2f1569a684e0c5ced upstream. In a very similar spirit to commit c470bdc1aaf3 ("mac80211: don't WARN on bad WMM parameters from buggy APs"), an AP may not transmit a fully-formed WMM IE. For example, it may miss or repeat an Access Category. The above loop won't catch that and will instead leave one of the four ACs zeroed out. This triggers the following warning in drv_conf_tx() wlan0: invalid CW_min/CW_max: 0/0 and it may leave one of the hardware queues unconfigured. If we detect such a case, let's just print a warning and fall back to the defaults. Tested with a hacked version of hostapd, intentionally corrupting the IEs in hostapd_eid_wmm(). Cc: stable@vger.kernel.org Signed-off-by: Brian Norris <briannorris@chromium.org> Link: https://lore.kernel.org/r/20190726224758.210953-1-briannorris@chromium.org Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-08-16mac80211: don't warn about CW params when not using themBrian Norris
[ Upstream commit d2b3fe42bc629c2d4002f652b3abdfb2e72991c7 ] ieee80211_set_wmm_default() normally sets up the initial CW min/max for each queue, except that it skips doing this if the driver doesn't support ->conf_tx. We still end up calling drv_conf_tx() in some cases (e.g., ieee80211_reconfig()), which also still won't do anything useful...except it complains here about the invalid CW parameters. Let's just skip the WARN if we weren't going to do anything useful with the parameters. Signed-off-by: Brian Norris <briannorris@chromium.org> Link: https://lore.kernel.org/r/20190718015712.197499-1-briannorris@chromium.org Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-21mac80211: only warn once on chanctx_conf being NULLYibo Zhao
[ Upstream commit 563572340173865a9a356e6bb02579e6998a876d ] In multiple SSID cases, it takes time to prepare every AP interface to be ready in initializing phase. If a sta already knows everything it needs to join one of the APs and sends authentication to the AP which is not fully prepared at this point of time, AP's channel context could be NULL. As a result, warning message occurs. Even worse, if the AP is under attack via tools such as MDK3 and massive authentication requests are received in a very short time, console will be hung due to kernel warning messages. WARN_ON_ONCE() could be a better way for indicating warning messages without duplicate messages to flood the console. Johannes: We still need to address the underlying problem, but we don't really have a good handle on it yet. Suppress the worst side-effects for now. Signed-off-by: Zhi Chen <zhichen@codeaurora.org> Signed-off-by: Yibo Zhao <yiboz@codeaurora.org> [johannes: add note, change subject] Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-21mac80211: free peer keys before vif down in meshPradeep Kumar Chitrapu
[ Upstream commit 0112fa557c3bb3a002bc85760dc3761d737264d3 ] freeing peer keys after vif down is resulting in peer key uninstall to fail due to interface lookup failure. so fix that. Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-21mac80211: mesh: fix RCU warningThomas Pedersen
[ Upstream commit 551842446ed695641a00782cd118cbb064a416a1 ] ifmsh->csa is an RCU-protected pointer. The writer context in ieee80211_mesh_finish_csa() is already mutually exclusive with wdev->sdata.mtx, but the RCU checker did not know this. Use rcu_dereference_protected() to avoid a warning. fixes the following warning: [ 12.519089] ============================= [ 12.520042] WARNING: suspicious RCU usage [ 12.520652] 5.1.0-rc7-wt+ #16 Tainted: G W [ 12.521409] ----------------------------- [ 12.521972] net/mac80211/mesh.c:1223 suspicious rcu_dereference_check() usage! [ 12.522928] other info that might help us debug this: [ 12.523984] rcu_scheduler_active = 2, debug_locks = 1 [ 12.524855] 5 locks held by kworker/u8:2/152: [ 12.525438] #0: 00000000057be08c ((wq_completion)phy0){+.+.}, at: process_one_work+0x1a2/0x620 [ 12.526607] #1: 0000000059c6b07a ((work_completion)(&sdata->csa_finalize_work)){+.+.}, at: process_one_work+0x1a2/0x620 [ 12.528001] #2: 00000000f184ba7d (&wdev->mtx){+.+.}, at: ieee80211_csa_finalize_work+0x2f/0x90 [ 12.529116] #3: 00000000831a1f54 (&local->mtx){+.+.}, at: ieee80211_csa_finalize_work+0x47/0x90 [ 12.530233] #4: 00000000fd06f988 (&local->chanctx_mtx){+.+.}, at: ieee80211_csa_finalize_work+0x51/0x90 Signed-off-by: Thomas Pedersen <thomas@eero.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-06-25mac80211: Do not use stack memory with scatterlist for GMACJouni Malinen
commit a71fd9dac23613d96ba3c05619a8ef4fd6cdf9b9 upstream. ieee80211_aes_gmac() uses the mic argument directly in sg_set_buf() and that does not allow use of stack memory (e.g., BUG_ON() is hit in sg_set_buf() with CONFIG_DEBUG_SG). BIP GMAC TX side is fine for this since it can use the skb data buffer, but the RX side was using a stack variable for deriving the local MIC value to compare against the received one. Fix this by allocating heap memory for the mic buffer. This was found with hwsim test case ap_cipher_bip_gmac_128 hitting that BUG_ON() and kernel panic. Cc: stable@vger.kernel.org Signed-off-by: Jouni Malinen <j@w1.fi> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-25mac80211: handle deauthentication/disassociation from TDLS peerYu Wang
commit 79c92ca42b5a3e0ea172ea2ce8df8e125af237da upstream. When receiving a deauthentication/disassociation frame from a TDLS peer, a station should not disconnect the current AP, but only disable the current TDLS link if it's enabled. Without this change, a TDLS issue can be reproduced by following the steps as below: 1. STA-1 and STA-2 are connected to AP, bidirection traffic is running between STA-1 and STA-2. 2. Set up TDLS link between STA-1 and STA-2, stay for a while, then teardown TDLS link. 3. Repeat step #2 and monitor the connection between STA and AP. During the test, one STA may send a deauthentication/disassociation frame to another, after TDLS teardown, with reason code 6/7, which means: Class 2/3 frame received from nonassociated STA. On receive this frame, the receiver STA will disconnect the current AP and then reconnect. It's not a expected behavior, purpose of this frame should be disabling the TDLS link, not the link with AP. Cc: stable@vger.kernel.org Signed-off-by: Yu Wang <yyuwang@codeaurora.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-25mac80211: drop robust management frames from unknown TAJohannes Berg
commit 588f7d39b3592a36fb7702ae3b8bdd9be4621e2f upstream. When receiving a robust management frame, drop it if we don't have rx->sta since then we don't have a security association and thus couldn't possibly validate the frame. Cc: stable@vger.kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-31mac80211/cfg80211: update bss channel on channel switchSergey Matyukevich
[ Upstream commit 5dc8cdce1d722c733f8c7af14c5fb595cfedbfa8 ] FullMAC STAs have no way to update bss channel after CSA channel switch completion. As a result, user-space tools may provide inconsistent channel info. For instance, consider the following two commands: $ sudo iw dev wlan0 link $ sudo iw dev wlan0 info The latter command gets channel info from the hardware, so most probably its output will be correct. However the former command gets channel info from scan cache, so its output will contain outdated channel info. In fact, current bss channel info will not be updated until the next [re-]connect. Note that mac80211 STAs have a workaround for this, but it requires access to internal cfg80211 data, see ieee80211_chswitch_work: /* XXX: shouldn't really modify cfg80211-owned data! */ ifmgd->associated->channel = sdata->csa_chandef.chan; This patch suggests to convert mac80211 workaround into cfg80211 behavior and to update current bss channel in cfg80211_ch_switch_notify. Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-05-25mac80211: Fix kernel panic due to use of txq after freeBhagavathi Perumal S
[ Upstream commit f1267cf3c01b12e0f843fb6a7450a7f0b2efab8a ] The txq of vif is added to active_txqs list for ATF TXQ scheduling in the function ieee80211_queue_skb(), but it was not properly removed before freeing the txq object. It was causing use after free of the txq objects from the active_txqs list, result was kernel panic due to invalid memory access. Fix kernel invalid memory access by properly removing txq object from active_txqs list before free the object. Signed-off-by: Bhagavathi Perumal S <bperumal@codeaurora.org> Acked-by: Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-05-16mac80211: fix memory accounting with A-MSDU aggregationFelix Fietkau
[ Upstream commit eb9b64e3a9f8483e6e54f4e03b2ae14ae5db2690 ] skb->truesize can change due to memory reallocation or when adding extra fragments. Adjust fq->memory_usage accordingly Signed-off-by: Felix Fietkau <nbd@nbd.name> Acked-by: Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-05-16mac80211: Increase MAX_MSG_LENAndrei Otcheretianski
[ Upstream commit 78be2d21cc1cd3069c6138dcfecec62583130171 ] Looks that 100 chars isn't enough for messages, as we keep getting warnings popping from different places due to message shortening. Instead of trying to shorten the prints, just increase the buffer size. Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-05-16mac80211: fix unaligned access in mesh table hash functionFelix Fietkau
[ Upstream commit 40586e3fc400c00c11151804dcdc93f8c831c808 ] The pointer to the last four bytes of the address is not guaranteed to be aligned, so we need to use __get_unaligned_cpu32 here Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-04-27mac80211: do not call driver wake_tx_queue op during reconfigFelix Fietkau
commit 4856bfd230985e43e84c26473c91028ff0a533bd upstream. There are several scenarios in which mac80211 can call drv_wake_tx_queue after ieee80211_restart_hw has been called and has not yet completed. Driver private structs are considered uninitialized until mac80211 has uploaded the vifs, stations and keys again, so using private tx queue data during that time is not safe. The driver can also not rely on drv_reconfig_complete to figure out when it is safe to accept drv_wake_tx_queue calls again, because it is only called after all tx queues are woken again. To fix this, bail out early in drv_wake_tx_queue if local->in_reconfig is set. Cc: stable@vger.kernel.org Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-23mac80211: Fix Tx aggregation session tear down with ITXQsIlan Peer
[ Upstream commit 6157ca0d6bfe437691b1e98a62e2efe12b6714da ] When mac80211 requests the low level driver to stop an ongoing Tx aggregation, the low level driver is expected to call ieee80211_stop_tx_ba_cb_irqsafe() to indicate that it is ready to stop the session. The callback in turn schedules a worker to complete the session tear down, which in turn also handles the relevant state for the intermediate Tx queue. However, as this flow in asynchronous, the intermediate queue should be stopped and not continue servicing frames, as in such a case frames that are dequeued would be marked as part of an aggregation, although the aggregation is already been stopped. Fix this by stopping the intermediate Tx queue, before calling the low level driver to stop the Tx aggregation. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-03-05mac80211: Add attribute aligned(2) to struct 'action'Mathieu Malaterre
[ Upstream commit 7c53eb5d87bc21464da4268c3c0c47457b6d9c9b ] During refactor in commit 9e478066eae4 ("mac80211: fix MU-MIMO follow-MAC mode") a new struct 'action' was declared with packed attribute as: struct { struct ieee80211_hdr_3addr hdr; u8 category; u8 action_code; } __packed action; But since struct 'ieee80211_hdr_3addr' is declared with an aligned keyword as: struct ieee80211_hdr { __le16 frame_control; __le16 duration_id; u8 addr1[ETH_ALEN]; u8 addr2[ETH_ALEN]; u8 addr3[ETH_ALEN]; __le16 seq_ctrl; u8 addr4[ETH_ALEN]; } __packed __aligned(2); Solve the ambiguity of placing aligned structure in a packed one by adding the aligned(2) attribute to struct 'action'. This removes the following warning (W=1): net/mac80211/rx.c:234:2: warning: alignment 1 of 'struct <anonymous>' is less than 2 [-Wpacked-not-aligned] Cc: Johannes Berg <johannes.berg@intel.com> Suggested-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Mathieu Malaterre <malat@debian.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-03-05mac80211: don't initiate TDLS connection if station is not associated to APBalaji Pothunoori
[ Upstream commit 7ed5285396c257fd4070b1e29e7b2341aae2a1ce ] Following call trace is observed while adding TDLS peer entry in driver during TDLS setup. Call Trace: [<c1301476>] dump_stack+0x47/0x61 [<c10537d2>] __warn+0xe2/0x100 [<fa22415f>] ? sta_apply_parameters+0x49f/0x550 [mac80211] [<c1053895>] warn_slowpath_null+0x25/0x30 [<fa22415f>] sta_apply_parameters+0x49f/0x550 [mac80211] [<fa20ad42>] ? sta_info_alloc+0x1c2/0x450 [mac80211] [<fa224623>] ieee80211_add_station+0xe3/0x160 [mac80211] [<c1876fe3>] nl80211_new_station+0x273/0x420 [<c170f6d9>] genl_rcv_msg+0x219/0x3c0 [<c170f4c0>] ? genl_rcv+0x30/0x30 [<c170ee7e>] netlink_rcv_skb+0x8e/0xb0 [<c170f4ac>] genl_rcv+0x1c/0x30 [<c170e8aa>] netlink_unicast+0x13a/0x1d0 [<c170ec18>] netlink_sendmsg+0x2d8/0x390 [<c16c5acd>] sock_sendmsg+0x2d/0x40 [<c16c6369>] ___sys_sendmsg+0x1d9/0x1e0 Fixing this by allowing TDLS setup request only when we have completed association. Signed-off-by: Balaji Pothunoori <bpothuno@codeaurora.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-03-05mac80211: fix miscounting of ttl-dropped framesBob Copeland
[ Upstream commit a0dc02039a2ee54fb4ae400e0b755ed30e73e58c ] In ieee80211_rx_h_mesh_fwding, we increment the 'dropped_frames_ttl' counter when we decrement the ttl to zero. For unicast frames destined for other hosts, we stop processing the frame at that point. For multicast frames, we do not rebroadcast it in this case, but we do pass the frame up the stack to process it on this STA. That doesn't match the usual definition of "dropped," so don't count those as such. With this change, something like `ping6 -i0.2 ff02::1%mesh0` from a peer in a ttl=1 network no longer increments the counter rapidly. Signed-off-by: Bob Copeland <bobcopeland@fb.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-02-27mac80211: Free mpath object when rhashtable insertion failsHerbert Xu
commit 4ff3a9d14c6c06eaa4e5976c61599ea2bd9e81b2 upstream. When rhashtable insertion fails the mesh table code doesn't free the now-orphan mesh path object. This patch fixes that. Cc: stable@vger.kernel.org Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-27mac80211: Restore vif beacon interval if start ap failsRakesh Pillai
commit 83e37e0bdd1470bbe6612250b745ad39b1a7b130 upstream. The starting of AP interface can fail due to invalid beacon interval, which does not match the minimum gcd requirement set by the wifi driver. In such case, the beacon interval of that interface gets updated with that invalid beacon interval. The next time that interface is brought up in AP mode, an interface combination check is performed and the beacon interval is taken from the previously set value. In a case where an invalid beacon interval, i.e. a beacon interval value which does not satisfy the minimum gcd criteria set by the driver, is set, all the subsequent trials to bring that interface in AP mode will fail, even if the subsequent trials have a valid beacon interval. To avoid this, in case of a failure in bringing up an interface in AP mode due to interface combination error, the interface beacon interval which is stored in bss conf, needs to be restored with the last working value of beacon interval. Tested on ath10k using WCN3990. Cc: stable@vger.kernel.org Fixes: 0c317a02ca98 ("cfg80211: support virtual interfaces with different beacon intervals") Signed-off-by: Rakesh Pillai <pillair@codeaurora.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-15mac80211: ensure that mgmt tx skbs have tailroom for encryptionFelix Fietkau
commit 9d0f50b80222dc273e67e4e14410fcfa4130a90c upstream. Some drivers use IEEE80211_KEY_FLAG_SW_MGMT_TX to indicate that management frames need to be software encrypted. Since normal data packets are still encrypted by the hardware, crypto_tx_tailroom_needed_cnt gets decremented after key upload to hw. This can lead to passing skbs to ccmp_encrypt_skb, which don't have the necessary tailroom for software encryption. Change the code to add tailroom for encrypted management packets, even if crypto_tx_tailroom_needed_cnt is 0. Cc: stable@vger.kernel.org Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-12mac80211: fix radiotap vendor presence bitmap handlingJohannes Berg
[ Upstream commit efc38dd7d5fa5c8cdd0c917c5d00947aa0539443 ] Due to the alignment handling, it actually matters where in the code we add the 4 bytes for the presence bitmap to the length; the first field is the timestamp with 8 byte alignment so we need to add the space for the extra vendor namespace presence bitmap *before* we do any alignment for the fields. Move the presence bitmap length accounting to the right place to fix the alignment for the data properly. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-01-13mac80211: free skb fraglist before freeing the skbSara Sharon
[ Upstream commit 34b1e0e9efe101822e83cc62d22443ed3867ae7a ] mac80211 uses the frag list to build AMSDU. When freeing the skb, it may not be really freed, since someone is still holding a reference to it. In that case, when TCP skb is being retransmitted, the pointer to the frag list is being reused, while the data in there is no longer valid. Since we will never get frag list from the network stack, as mac80211 doesn't advertise the capability, we can safely free and nullify it before releasing the SKB. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2018-12-21mac80211: Fix condition validating WMM IEIlan Peer
[ Upstream commit 911a26484c33e10de6237228ca1d7293548e9f49 ] Commit c470bdc1aaf3 ("mac80211: don't WARN on bad WMM parameters from buggy APs") handled cases where an AP reports a zeroed WMM IE. However, the condition that checks the validity accessed the wrong index in the ieee80211_tx_queue_params array, thus wrongly deducing that the parameters are invalid. Fix it. Fixes: c470bdc1aaf3 ("mac80211: don't WARN on bad WMM parameters from buggy APs") Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2018-12-21mac80211: don't WARN on bad WMM parameters from buggy APsEmmanuel Grumbach
[ Upstream commit c470bdc1aaf36669e04ba65faf1092b2d1c6cabe ] Apparently, some APs are buggy enough to send a zeroed WMM IE. Don't WARN on this since this is not caused by a bug on the client's system. This aligns the condition of the WARNING in drv_conf_tx with the validity check in ieee80211_sta_wmm_params. We will now pick the default values whenever we get a zeroed WMM IE. This has been reported here: https://bugzilla.kernel.org/show_bug.cgi?id=199161 Fixes: f409079bb678 ("mac80211: sanity check CW_min/CW_max towards driver") Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2018-12-13mac80211: ignore NullFunc frames in the duplicate detectionEmmanuel Grumbach
commit 990d71846a0b7281bd933c34d734e6afc7408e7e upstream. NullFunc packets should never be duplicate just like QoS-NullFunc packets. We saw a client that enters / exits power save with NullFunc frames (and not with QoS-NullFunc) despite the fact that the association supports HT. This specific client also re-uses a non-zero sequence number for different NullFunc frames. At some point, the client had to send a retransmission of the NullFunc frame and we dropped it, leading to a misalignment in the power save state. Fix this by never consider a NullFunc frame as duplicate, just like we do for QoS NullFunc frames. This fixes https://bugzilla.kernel.org/show_bug.cgi?id=201449 CC: <stable@vger.kernel.org> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-13mac80211: fix reordering of buffered broadcast packetsFelix Fietkau
commit 9ec1190d065998650fd9260dea8cf3e1f56c0e8c upstream. If the buffered broadcast queue contains packets, letting new packets bypass that queue can lead to heavy reordering, since the driver is probably throttling transmission of buffered multicast packets after beacons. Keep buffering packets until the buffer has been cleared (and no client is in powersave mode). Cc: stable@vger.kernel.org Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-13mac80211: ignore tx status for PS stations in ieee80211_tx_status_extFelix Fietkau
commit a317e65face482371de30246b6494feb093ff7f9 upstream. Make it behave like regular ieee80211_tx_status calls, except for the lack of filtered frame processing. This fixes spurious low-ack triggered disconnections with powersave clients connected to an AP. Fixes: f027c2aca0cf4 ("mac80211: add ieee80211_tx_status_noskb") Cc: stable@vger.kernel.org Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-13mac80211: Clear beacon_int in ieee80211_do_stopBen Greear
commit 5c21e8100dfd57c806e833ae905e26efbb87840f upstream. This fixes stale beacon-int values that would keep a netdev from going up. To reproduce: Create two VAP on one radio. vap1 has beacon-int 100, start it. vap2 has beacon-int 240, start it (and it will fail because beacon-int mismatch). reconfigure vap2 to have beacon-int 100 and start it. It will fail because the stale beacon-int 240 will be used in the ifup path and hostapd never gets a chance to set the new beacon interval. Cc: stable@vger.kernel.org Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-04mac80211: fix TX status reporting for ieee80211sYuan-Chi Pang
[ Upstream commit c42055105785580563535e6d3143cad95c7ac7ee ] TX status reporting to ieee80211s is through ieee80211s_update_metric. There are two problems about ieee80211s_update_metric: 1. The purpose is to estimate the fail probability to a specific link. No need to restrict to data frame. 2. Current implementation does not work if wireless driver does not pass tx_status with skb. Fix this by removing ieee80211_is_data condition, passing ieee80211_tx_status directly to ieee80211s_update_metric, and putting it in both __ieee80211_tx_status and ieee80211_tx_status_ext. Signed-off-by: Yuan-Chi Pang <fu3mo6goo@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2018-11-04mac80211: TDLS: fix skb queue/priority assignmentJohannes Berg
[ Upstream commit cb59bc14e830028d2244861216df038165d7625d ] If the TDLS setup happens over a connection to an AP that doesn't have QoS, we nevertheless assign a non-zero TID (skb->priority) and queue mapping, which may confuse us or drivers later. Fix it by just assigning the special skb->priority and then using ieee80211_select_queue() just like other data frames would go through. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2018-11-04mac80211: fix pending queue hang due to TX_DROPBob Copeland
[ Upstream commit 6eae4a6c2be387fec41b0d2782c4fffb57159498 ] In our environment running lots of mesh nodes, we are seeing the pending queue hang periodically, with the debugfs queues file showing lines such as: 00: 0x00000000/348 i.e. there are a large number of frames but no stop reason set. One way this could happen is if queue processing from the pending tasklet exited early without processing all frames, and without having some future event (incoming frame, stop reason flag, ...) to reschedule it. Exactly this can occur today if ieee80211_tx() returns false due to packet drops or power-save buffering in the tx handlers. In the past, this function would return true in such cases, and the change to false doesn't seem to be intentional. Fix this case by reverting to the previous behavior. Fixes: bb42f2d13ffc ("mac80211: Move reorder-sensitive TX handlers to after TXQ dequeue") Signed-off-by: Bob Copeland <bobcopeland@fb.com> Acked-by: Toke Høiland-Jørgensen <toke@toke.dk> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2018-11-04mac80211: Always report TX statusAndrei Otcheretianski
[ Upstream commit 8682250b3c1b75a45feb7452bc413d004cfe3778 ] If a frame is dropped for any reason, mac80211 wouldn't report the TX status back to user space. As the user space may rely on the TX_STATUS to kick its state machines, resends etc, it's better to just report this frame as not acked instead. Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2018-10-13mac80211: fix setting IEEE80211_KEY_FLAG_RX_MGMT for AP mode keysFelix Fietkau
commit 211710ca74adf790b46ab3867fcce8047b573cd1 upstream. key->sta is only valid after ieee80211_key_link, which is called later in this function. Because of that, the IEEE80211_KEY_FLAG_RX_MGMT is never set when management frame protection is enabled. Fixes: e548c49e6dc6b ("mac80211: add key flag for management keys") Cc: stable@vger.kernel.org Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-10mac80211: shorten the IBSS debug messagesEmmanuel Grumbach
[ Upstream commit c6e57b3896fc76299913b8cfd82d853bee8a2c84 ] When tracing is enabled, all the debug messages are recorded and must not exceed MAX_MSG_LEN (100) columns. Longer debug messages grant the user with: WARNING: CPU: 3 PID: 32642 at /tmp/wifi-core-20180806094828/src/iwlwifi-stack-dev/net/mac80211/./trace_msg.h:32 trace_event_raw_event_mac80211_msg_event+0xab/0xc0 [mac80211] Workqueue: phy1 ieee80211_iface_work [mac80211] RIP: 0010:trace_event_raw_event_mac80211_msg_event+0xab/0xc0 [mac80211] Call Trace: __sdata_dbg+0xbd/0x120 [mac80211] ieee80211_ibss_rx_queued_mgmt+0x15f/0x510 [mac80211] ieee80211_iface_work+0x21d/0x320 [mac80211] Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-10mac80211: don't Tx a deauth frame if the AP forbade TxEmmanuel Grumbach
[ Upstream commit 6c18b27d6e5c6a7206364eae2b47bc8d8b2fa68f ] If the driver fails to properly prepare for the channel switch, mac80211 will disconnect. If the CSA IE had mode set to 1, it means that the clients are not allowed to send any Tx on the current channel, and that includes the deauthentication frame. Make sure that we don't send the deauthentication frame in this case. In iwlwifi, this caused a failure to flush queues since the firmware already closed the queues after having parsed the CSA IE. Then mac80211 would wait until the deauthentication frame would go out (drv_flush(drop=false)) and that would never happen. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-10mac80211: Fix station bandwidth setting after channel switchIlan Peer
[ Upstream commit 0007e94355fdb71a1cf5dba0754155cba08f0666 ] When performing a channel switch flow for a managed interface, the flow did not update the bandwidth of the AP station and the rate scale algorithm. In case of a channel width downgrade, this would result with the rate scale algorithm using a bandwidth that does not match the interface channel configuration. Fix this by updating the AP station bandwidth and rate scaling algorithm before the actual channel change in case of a bandwidth downgrade, or after the actual channel change in case of a bandwidth upgrade. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-10mac80211: fix a race between restart and CSA flowsEmmanuel Grumbach
[ Upstream commit f3ffb6c3a28963657eb8b02a795d75f2ebbd5ef4 ] We hit a problem with iwlwifi that was caused by a bug in mac80211. A bug in iwlwifi caused the firwmare to crash in certain cases in channel switch. Because of that bug, drv_pre_channel_switch would fail and trigger the restart flow. Now we had the hw restart worker which runs on the system's workqueue and the csa_connection_drop_work worker that runs on mac80211's workqueue that can run together. This is obviously problematic since the restart work wants to reconfigure the connection, while the csa_connection_drop_work worker does the exact opposite: it tries to disconnect. Fix this by cancelling the csa_connection_drop_work worker in the restart worker. Note that this can sound racy: we could have: driver iface_work CSA_work restart_work +++++++++++++++++++++++++++++++++++++++++++++ | <--drv_cs ---| <FW CRASH!> -CS FAILED--> | | | cancel_work(CSA) schedule | CSA work | | | Race between those 2 But this is not possible because we flush the workqueue in the restart worker before we cancel the CSA worker. That would be bullet proof if we could guarantee that we schedule the CSA worker only from the iface_work which runs on the workqueue (and not on the system's workqueue), but unfortunately we do have an instance in which we schedule the CSA work outside the context of the workqueue (ieee80211_chswitch_done). Note also that we should probably cancel other workers like beacon_connection_loss_work and possibly others for different types of interfaces, at the very least, IBSS should suffer from the exact same problem, but for now, do the minimum to fix the actual bug that was actually experienced and reproduced. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-10mac80211: fix an off-by-one issue in A-MSDU max_subframe computationLorenzo Bianconi
[ Upstream commit 66eb02d839e8495ae6b612e2d09ff599374b80e2 ] Initialize 'n' to 2 in order to take into account also the first packet in the estimation of max_subframe limit for a given A-MSDU since frag_tail pointer is NULL when ieee80211_amsdu_aggregate routine analyzes the second frame. Fixes: 6e0456b54545 ("mac80211: add A-MSDU tx support") Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-10mac80211: always account for A-MSDU header changesJohannes Berg
[ Upstream commit aa58acf325b4aadeecae2bfc90658273b47dbace ] In the error path of changing the SKB headroom of the second A-MSDU subframe, we would not account for the already-changed length of the first frame that just got converted to be in A-MSDU format and thus is a bit longer now. Fix this by doing the necessary accounting. It would be possible to reorder the operations, but that would make the code more complex (to calculate the necessary pad), and the headroom expansion should not fail frequently enough to make that worthwhile. Fixes: 6e0456b54545 ("mac80211: add A-MSDU tx support") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Acked-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-10mac80211: do not convert to A-MSDU if frag/subframe limitedLorenzo Bianconi
[ Upstream commit 1eb507903665442360a959136dfa3234c43db085 ] Do not start to aggregate packets in a A-MSDU frame (converting the first subframe to A-MSDU, adding the header) if max_tx_fragments or max_amsdu_subframes limits are already exceeded by it. In particular, this happens when drivers set the limit to 1 to avoid A-MSDUs at all. Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> [reword commit message to be more precise] Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-10mac80211: avoid kernel panic when building AMSDU from non-linear SKBSara Sharon
[ Upstream commit 166ac9d55b0ab70b644e429be1f217fe8393cbd7 ] When building building AMSDU from non-linear SKB, we hit a kernel panic when trying to push the padding to the tail. Instead, put the padding at the head of the next subframe. This also fixes the A-MSDU subframes to not have the padding accounted in the length field and not have pad at all for the last subframe, both required by the spec. Fixes: 6e0456b54545 ("mac80211: add A-MSDU tx support") Signed-off-by: Sara Sharon <sara.sharon@intel.com> Reviewed-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-10mac80211: mesh: fix HWMP sequence numbering to follow standardYuan-Chi Pang
[ Upstream commit 1f631c3201fe5491808df143d8fcba81b3197ffd ] IEEE 802.11-2016 14.10.8.3 HWMP sequence numbering says: If it is a target mesh STA, it shall update its own HWMP SN to maximum (current HWMP SN, target HWMP SN in the PREQ element) + 1 immediately before it generates a PREP element in response to a PREQ element. Signed-off-by: Yuan-Chi Pang <fu3mo6goo@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.0.4) at 2024-04-28 07:45:26 +0000