summaryrefslogtreecommitdiff
path: root/net/openvswitch
AgeCommit message (Collapse)Author
2015-10-05openvswitch: Rename LABEL->LABELSJoe Stringer
Conntrack LABELS (plural) are exposed by conntrack; rename the OVS name for these to be consistent with conntrack. Fixes: c2ac667 "openvswitch: Allow matching on conntrack label" Signed-off-by: Joe Stringer <joestringer@nicira.com> Acked-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-30openvswitch: Remove ovs_vport_output_skEric W. Biederman
This was a compatibility function needed while the ipv4 and ipv6 fragmentation code was being modified to pass a struct net through them. Now that is complete this function has no more users so remove it. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2015-09-30ipv6: Pass struct net through ip6_fragmentEric W. Biederman
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2015-09-30ipv4: Pass struct net through ip_fragmentEric W. Biederman
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2015-09-30openvswitch: Pass net into ovs_fragmentEric W. Biederman
In preparation for the ipv4 and ipv6 fragmentation code taking a net parameter pass a struct net into ovs_fragment where the v4 and v6 fragmentation code is called. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2015-09-30openvswitch: Pass net into ovs_vport_outputEric W. Biederman
When struct net starts being passed through the ipv4 and ipv6 fragment routines ovs_vport_output will need to take a net parameter. Prepare ovs_vport_output before that is needed and introduce ovs_vport_output_skk for the call sites that still need the old calling conventions. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2015-09-29net: Drop unlikely before IS_ERR(_OR_NULL)Viresh Kumar
IS_ERR(_OR_NULL) already contain an 'unlikely' compiler flag and there is no need to do that again from its callers. Drop it. Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-09-26vxlan: support both IPv4 and IPv6 sockets in a single vxlan deviceJiri Benc
For metadata based vxlan interface, open both IPv4 and IPv6 socket. This is much more user friendly: it's not necessary to create two vxlan interfaces and pay attention to using the right one in routing rules. Signed-off-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: net/ipv4/arp.c The net/ipv4/arp.c conflict was one commit adding a new local variable while another commit was deleting one. Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-24genetlink: simplify genl_notifyJiri Benc
The genl_notify function has too many arguments for no real reason - all callers use genl_info to get them anyway. Just pass the genl_info down to genl_notify. Signed-off-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-22openvswitch: Zero flows on allocation.Jesse Gross
When support for megaflows was introduced, OVS needed to start installing flows with a mask applied to them. Since masking is an expensive operation, OVS also had an optimization that would only take the parts of the flow keys that were covered by a non-zero mask. The values stored in the remaining pieces should not matter because they are masked out. While this works fine for the purposes of matching (which must always look at the mask), serialization to netlink can be problematic. Since the flow and the mask are serialized separately, the uninitialized portions of the flow can be encoded with whatever values happen to be present. In terms of functionality, this has little effect since these fields will be masked out by definition. However, it leaks kernel memory to userspace, which is a potential security vulnerability. It is also possible that other code paths could look at the masked key and get uninitialized data, although this does not currently appear to be an issue in practice. This removes the mask optimization for flows that are being installed. This was always intended to be the case as the mask optimizations were really targetting per-packet flow operations. Fixes: 03f0d916 ("openvswitch: Mega flow implementation") Signed-off-by: Jesse Gross <jesse@nicira.com> Acked-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-18netfilter: nf_conntrack: Add a struct net parameter to l4_pkt_to_tupleEric W. Biederman
As gre does not have the srckey in the packet gre_pkt_to_tuple needs to perform a lookup in it's per network namespace tables. Pass in the proper network namespace to all pkt_to_tuple implementations to ensure gre (and any similar protocols) can get this right. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2015-09-17openvswitch: Fix IPv6 exthdr handling with ct helpers.Joe Stringer
Static code analysis reveals the following bug: net/openvswitch/conntrack.c:281 ovs_ct_helper() warn: unsigned 'protoff' is never less than zero. This signedness bug breaks error handling for IPv6 extension headers when using conntrack helpers. Fix the error by using a local signed variable. Fixes: cae3a2627520: "openvswitch: Allow attaching helpers to ct action" Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Joe Stringer <joestringer@nicira.com> Acked-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-15openvswitch: Fix mask generation for nested attributes.Jesse Gross
Masks were added to OVS flows in a way that was backwards compatible with userspace programs that did not generate masks. As a result, it is possible that we may receive flows that do not have a mask and we need to synthesize one. Generating a mask requires iterating over attributes and descending into nested attributes. For each level we need to know the size to generate the correct mask. We do this with a linked table of attribute types. Although the logic to handle these nested attributes was there in concept, there are a number of bugs in practice. Examples include incomplete links between tables, variable length attributes being treated as nested and missing sanity checks. Signed-off-by: Jesse Gross <jesse@nicira.com> Acked-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-11openvswitch: Fix dependency on IPv6 defrag.Joe Stringer
When NF_CONNTRACK is built-in, NF_DEFRAG_IPV6 is a module, and OPENVSWITCH is built-in, the following build error would occur: net/built-in.o: In function `ovs_ct_execute': (.text+0x10f587): undefined reference to `nf_ct_frag6_gather' Fixes: 7f8a436eaa2c ("openvswitch: Add conntrack action") Reported-by: Jim Davis <jim.epost@gmail.com> Signed-off-by: Joe Stringer <joestringer@nicira.com> Acked-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-06openvswitch: Remove conntrack Kconfig option.Joe Stringer
There's no particular desire to have conntrack action support in Open vSwitch as an independently configurable bit, rather just to ensure there is not a hard dependency. This exposed option doesn't accurately reflect the conntrack dependency when enabled, so simplify this by removing the option. Compile the support if NF_CONNTRACK is enabled. Fixes: 7f8a436eaa2c ("openvswitch: Add conntrack action") Signed-off-by: Joe Stringer <joestringer@nicira.com> Acked-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-31ip-tunnel: Use API to access tunnel metadata options.Pravin B Shelar
Currently tun-info options pointer is used in few cases to pass options around. But tunnel options can be accessed using ip_tunnel_info_opts() API without using the pointer. Following patch removes the redundant pointer and consistently make use of API. Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Acked-by: Thomas Graf <tgraf@suug.ch> Reviewed-by: Jesse Gross <jesse@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-29openvswitch: Remove vport-netPravin B Shelar
This structure is not used anymore. Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-29openvswitch: Remove vport stats.Pravin B Shelar
Since all vport types are now backed by netdev, we can directly use netdev stats. Following patch removes redundant stat from vport. Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-29openvswitch: Remove egress_tun_info.Pravin B Shelar
tun info is passed using skb-dst pointer. Now we have converted all vports to netdev based implementation so Now we can remove redundant pointer to tun-info from OVS_CB. Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-29openvswitch: Remove vport get_name()Pravin B Shelar
Remove unused get_name() function pointer from vport ops. Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-29openvswitch: retain parsed IPv6 header fields in flow on error skipping ↵Simon Horman
extension headers When an error occurs skipping IPv6 extension headers retain the already parsed IP protocol and IPv6 addresses in the flow. Also assume that the packet is not a fragment in the absence of information to the contrary; that is always use the frag_off value set by ipv6_skip_exthdr(). This allows matching on the IP protocol and IPv6 addresses of packets with malformed extension headers. Signed-off-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-29ip_tunnels: record IP version in tunnel infoJiri Benc
There's currently nothing preventing directing packets with IPv6 encapsulation data to IPv4 tunnels (and vice versa). If this happens, IPv6 addresses are incorrectly interpreted as IPv4 ones. Track whether the given ip_tunnel_key contains IPv4 or IPv6 data. Store this in ip_tunnel_info. Reject packets at appropriate places if they are supposed to be encapsulated into an incompatible protocol. Signed-off-by: Jiri Benc <jbenc@redhat.com> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Acked-by: Thomas Graf <tgraf@suug.ch> Acked-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-28openvswitch: Fix conntrack compilation without mark.Joe Stringer
Fix build with !CONFIG_NF_CONNTRACK_MARK && CONFIG_OPENVSWITCH_CONNTRACK Fixes: 182e304 ("openvswitch: Allow matching on conntrack mark") Reported-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: Joe Stringer <joestringer@nicira.com> Tested-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-28openswitch: fix typo CONFIG_NF_CONNTRACK_LABELValentin Rothberg
Fix typo in conntrack.c s/CONFIG_NF_CONNTRACK_LABEL/CONFIG_NF_CONNTRACK_LABELS/ Signed-off-by: Valentin Rothberg <valentinrothberg@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-27openvswitch: Include ip6_fib.h.Joe Stringer
kbuild test robot reports that certain configurations will not automatically pick up on the "struct rt6_info" definition, so explicitly include the header for this structure. Fixes: 7f8a436 "openvswitch: Add conntrack action" Signed-off-by: Joe Stringer <joestringer@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-27net: add netif_is_ovs_master helper with IFF_OPENVSWITCH private flagJiri Pirko
Add this helper so code can easily figure out if netdev is openswitch. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-27openvswitch: Use Geneve device.Pravin B Shelar
With help of tunnel metadata mode OVS can directly use Geneve devices to implement Geneve tunnels. This patch removes all of the OVS specific Geneve code and make OVS use a Geneve net_device. Basic geneve vport is still there to handle compatibility with current userspace application. Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Reviewed-by: Jesse Gross <jesse@nicira.com> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-27openvswitch: Allow attaching helpers to ct actionJoe Stringer
Add support for using conntrack helpers to assist protocol detection. The new OVS_CT_ATTR_HELPER attribute of the CT action specifies a helper to be used for this connection. If no helper is specified, then helpers will be automatically applied as per the sysctl configuration of net.netfilter.nf_conntrack_helper. The helper may be specified as part of the conntrack action, eg: ct(helper=ftp). Initial packets for related connections should be committed to allow later packets for the flow to be considered established. Example ovs-ofctl flows allowing FTP connections from ports 1->2: in_port=1,tcp,action=ct(helper=ftp,commit),2 in_port=2,tcp,ct_state=-trk,action=ct(recirc) in_port=2,tcp,ct_state=+trk-new+est,action=1 in_port=2,tcp,ct_state=+trk+rel,action=1 Signed-off-by: Joe Stringer <joestringer@nicira.com> Acked-by: Thomas Graf <tgraf@suug.ch> Acked-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-27openvswitch: Allow matching on conntrack labelJoe Stringer
Allow matching and setting the ct_label field. As with ct_mark, this is populated by executing the CT action. The label field may be modified by specifying a label and mask nested under the CT action. It is stored as metadata attached to the connection. Label modification occurs after lookup, and will only persist when the conntrack entry is committed by providing the COMMIT flag to the CT action. Labels are currently fixed to 128 bits in size. Signed-off-by: Joe Stringer <joestringer@nicira.com> Acked-by: Thomas Graf <tgraf@suug.ch> Acked-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-27openvswitch: Allow matching on conntrack markJoe Stringer
Allow matching and setting the ct_mark field. As with ct_state and ct_zone, these fields are populated when the CT action is executed. To write to this field, a value and mask can be specified as a nested attribute under the CT action. This data is stored with the conntrack entry, and is executed after the lookup occurs for the CT action. The conntrack entry itself must be committed using the COMMIT flag in the CT action flags for this change to persist. Signed-off-by: Justin Pettit <jpettit@nicira.com> Signed-off-by: Joe Stringer <joestringer@nicira.com> Acked-by: Thomas Graf <tgraf@suug.ch> Acked-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-27openvswitch: Add conntrack actionJoe Stringer
Expose the kernel connection tracker via OVS. Userspace components can make use of the CT action to populate the connection state (ct_state) field for a flow. This state can be subsequently matched. Exposed connection states are OVS_CS_F_*: - NEW (0x01) - Beginning of a new connection. - ESTABLISHED (0x02) - Part of an existing connection. - RELATED (0x04) - Related to an established connection. - INVALID (0x20) - Could not track the connection for this packet. - REPLY_DIR (0x40) - This packet is in the reply direction for the flow. - TRACKED (0x80) - This packet has been sent through conntrack. When the CT action is executed by itself, it will send the packet through the connection tracker and populate the ct_state field with one or more of the connection state flags above. The CT action will always set the TRACKED bit. When the COMMIT flag is passed to the conntrack action, this specifies that information about the connection should be stored. This allows subsequent packets for the same (or related) connections to be correlated with this connection. Sending subsequent packets for the connection through conntrack allows the connection tracker to consider the packets as ESTABLISHED, RELATED, and/or REPLY_DIR. The CT action may optionally take a zone to track the flow within. This allows connections with the same 5-tuple to be kept logically separate from connections in other zones. If the zone is specified, then the "ct_zone" match field will be subsequently populated with the zone id. IP fragments are handled by transparently assembling them as part of the CT action. The maximum received unit (MRU) size is tracked so that refragmentation can occur during output. IP frag handling contributed by Andy Zhou. Based on original design by Justin Pettit. Signed-off-by: Joe Stringer <joestringer@nicira.com> Signed-off-by: Justin Pettit <jpettit@nicira.com> Signed-off-by: Andy Zhou <azhou@nicira.com> Acked-by: Thomas Graf <tgraf@suug.ch> Acked-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-27openvswitch: Move MASKED* macros to datapath.hJoe Stringer
This will allow the ovs-conntrack code to reuse these macros. Signed-off-by: Joe Stringer <joestringer@nicira.com> Acked-by: Thomas Graf <tgraf@suug.ch> Acked-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-27openvswitch: Serialize acts with original netlink lenJoe Stringer
Previously, we used the kernel-internal netlink actions length to calculate the size of messages to serialize back to userspace. However,the sw_flow_actions may not be formatted exactly the same as the actions on the wire, so store the original actions length when de-serializing and re-use the original length when serializing. Signed-off-by: Joe Stringer <joestringer@nicira.com> Acked-by: Pravin B Shelar <pshelar@nicira.com> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-20route: move lwtunnel state to dst_entryJiri Benc
Currently, the lwtunnel state resides in per-protocol data. This is a problem if we encapsulate ipv6 traffic in an ipv4 tunnel (or vice versa). The xmit function of the tunnel does not know whether the packet has been routed to it by ipv4 or ipv6, yet it needs the lwtstate data. Moving the lwtstate data to dst_entry makes such inter-protocol tunneling possible. As a bonus, this brings a nice diffstat. Signed-off-by: Jiri Benc <jbenc@redhat.com> Acked-by: Roopa Prabhu <roopa@cumulusnetworks.com> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-20ip_tunnels: use tos and ttl fields also for IPv6Jiri Benc
Rename the ipv4_tos and ipv4_ttl fields to just 'tos' and 'ttl', as they'll be used with IPv6 tunnels, too. Signed-off-by: Jiri Benc <jbenc@redhat.com> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-20ip_tunnels: add IPv6 addresses to ip_tunnel_keyJiri Benc
Add the IPv6 addresses as an union with IPv4 ones. When using IPv4, the newly introduced padding after the IPv4 addresses needs to be zeroed out. Signed-off-by: Jiri Benc <jbenc@redhat.com> Acked-by: Thomas Graf <tgraf@suug.ch> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-17net: Change pseudohdr argument of inet_proto_csum_replace* to be a boolTom Herbert
inet_proto_csum_replace4,2,16 take a pseudohdr argument which indicates the checksum field carries a pseudo header. This argument should be a boolean instead of an int. Signed-off-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-13Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: drivers/net/ethernet/cavium/Kconfig The cavium conflict was overlapping dependency changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-10openvswitch: Use regular GRE net_device instead of vportPravin B Shelar
Using GRE tunnel meta data collection feature, we can implement OVS GRE vport. This patch removes all of the OVS specific GRE code and make OVS use a ip_gre net_device. Minimal GRE vport is kept to handle compatibility with current userspace application. Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-10openvswitch: Move tunnel destroy function to oppenvswitch module.Pravin B Shelar
This function will be used in gre and geneve vport implementations. Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-07openvswitch: Make 100 percents packets sampled when sampling rate is 1.Wenyu Zhang
When sampling rate is 1, the sampling probability is UINT32_MAX. The packet should be sampled even the prandom32() generate the number of UINT32_MAX. And none packet need be sampled when the probability is 0. Signed-off-by: Wenyu Zhang <wenyuz@vmware.com> Acked-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-07vxlan: combine VXLAN_FLOWBASED into VXLAN_COLLECT_METADATAAlexei Starovoitov
IFLA_VXLAN_FLOWBASED is useless without IFLA_VXLAN_COLLECT_METADATA, so combine them into single IFLA_VXLAN_COLLECT_METADATA flag. 'flowbased' doesn't convey real meaning of the vxlan tunnel mode. This mode can be used by routing, tc+bpf and ovs. Only ovs is strictly flow based, so 'collect metadata' is a better name for this tunnel mode. Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-03openvswitch: Fix L4 checksum handling when dealing with IP fragmentsGlenn Griffin
openvswitch modifies the L4 checksum of a packet when modifying the ip address. When an IP packet is fragmented only the first fragment contains an L4 header and checksum. Prior to this change openvswitch would modify all fragments, modifying application data in non-first fragments, causing checksum failures in the reassembled packet. Signed-off-by: Glenn Griffin <ggriffin.kernel@gmail.com> Acked-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-29openvswitch: Re-add CONFIG_OPENVSWITCH_VXLANThomas Graf
This readds the config option CONFIG_OPENVSWITCH_VXLAN to avoid a hard dependency of OVS on VXLAN. It moves the VXLAN config compat code to vport-vxlan.c and allows compliation as a module. Fixes: 614732eaa12d ("openvswitch: Use regular VXLAN net_device device") Fixes: 2661371ace96 ("openvswitch: fix compilation when vxlan is a module") Cc: Pravin B Shelar <pshelar@nicira.com> Cc: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: Thomas Graf <tgraf@suug.ch> Acked-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-26openvswitch: Retrieve tunnel metadata when receiving from vport-netdevThomas Graf
Retrieve the tunnel metadata for packets received by a net_device and provide it to ovs_vport_receive() for flow key extraction. [This hunk was in the GRE patch in the initial series and missed the cut for the initial submission for merging.] Fixes: 614732eaa12d ("openvswitch: Use regular VXLAN net_device device") Signed-off-by: Thomas Graf <tgraf@suug.ch> Acked-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-26openvswitch: fix compilation when vxlan is a moduleNicolas Dichtel
With CONFIG_VXLAN=m and CONFIG_OPENVSWITCH=y, there was the following compilation error: LD init/built-in.o net/built-in.o: In function `vxlan_tnl_create': .../net/openvswitch/vport-netdev.c:322: undefined reference to `vxlan_dev_create' make: *** [vmlinux] Error 1 CC: Thomas Graf <tgraf@suug.ch> Fixes: 614732eaa12d ("openvswitch: Use regular VXLAN net_device device") Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: net/bridge/br_mdb.c br_mdb.c conflict was a function call being removed to fix a bug in 'net' but whose signature was changed in 'net-next'. Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-21openvswitch: allocate nr_node_ids flow_stats instead of num_possible_nodesChris J Arges
Some architectures like POWER can have a NUMA node_possible_map that contains sparse entries. This causes memory corruption with openvswitch since it allocates flow_cache with a multiple of num_possible_nodes() and assumes the node variable returned by for_each_node will index into flow->stats[node]. Use nr_node_ids to allocate a maximal sparse array instead of num_possible_nodes(). The crash was noticed after 3af229f2 was applied as it changed the node_possible_map to match node_online_map on boot. Fixes: 3af229f2071f5b5cb31664be6109561fbe19c861 Signed-off-by: Chris J Arges <chris.j.arges@canonical.com> Acked-by: Pravin B Shelar <pshelar@nicira.com> Acked-by: Nishanth Aravamudan <nacc@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-21openvswitch: Use regular VXLAN net_device deviceThomas Graf
This gets rid of all OVS specific VXLAN code in the receive and transmit path by using a VXLAN net_device to represent the vport. Only a small shim layer remains which takes care of handling the VXLAN specific OVS Netlink configuration. Unexports vxlan_sock_add(), vxlan_sock_release(), vxlan_xmit_skb() since they are no longer needed. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.0.4) at 2024-05-26 06:20:28 +0000