| Age | Commit message (Collapse) | Author |
|---|
|
RCU free the struct inode. This will allow:
- Subsequent store-free path walking patch. The inode must be consulted for
permissions when walking, so an RCU inode reference is a must.
- sb_inode_list_lock to be moved inside i_lock because sb list walkers who want
to take i_lock no longer need to take sb_inode_list_lock to walk the list in
the first place. This will simplify and optimize locking.
- Could remove some nested trylock loops in dcache code
- Could potentially simplify things a bit in VM land. Do not need to take the
page lock to follow page->mapping.
The downsides of this is the performance cost of using RCU. In a simple
creat/unlink microbenchmark, performance drops by about 10% due to inability to
reuse cache-hot slab objects. As iterations increase and RCU freeing starts
kicking over, this increases to about 20%.
In cases where inode lifetimes are longer (ie. many inodes may be allocated
during the average life span of a single inode), a lot of this cache reuse is
not applicable, so the regression caused by this patch is smaller.
The cache-hot regression could largely be avoided by using SLAB_DESTROY_BY_RCU,
however this adds some complexity to list walking and store-free path walking,
so I prefer to implement this at a later date, if it is shown to be a win in
real situations. I haven't found a regression in any non-micro benchmark so I
doubt it will be a problem.
Signed-off-by: Nick Piggin <npiggin@kernel.dk>
|
|
Change d_delete from a dentry deletion notification to a dentry caching
advise, more like ->drop_inode. Require it to be constant and idempotent,
and not take d_lock. This is how all existing filesystems use the callback
anyway.
This makes fine grained dentry locking of dput and dentry lru scanning
much simpler.
Signed-off-by: Nick Piggin <npiggin@kernel.dk>
|
|
Differentiate from server backchannel
Signed-off-by: Andy Adamson <andros@netapp.com>
Acked-by: Bruce Fields <bfields@redhat.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
The sessions based callback service is started prior to the CREATE_SESSION call
so that it can handle CB_NULL requests which can be sent before the
CREATE_SESSION call returns and the session ID is known.
Set the callback sessionid after a sucessful CREATE_SESSION.
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
Move the current sock create and destroy routines into the new transport ops.
Back channel socket will be destroyed by the svc_closs_all call in svc_destroy.
Added check: only TCP supported on shared back channel.
Signed-off-by: Andy Adamson <andros@netapp.com>
Acked-by: Bruce Fields <bfields@redhat.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
The NFSv4.1 shared back channel does not need to call svc_drop because the
callback service never outlives the single connection it services, and it
reuses it's buffers and keeps the trasport.
Signed-off-by: Andy Adamson <andros@netapp.com>
Acked-by: Bruce Fields <bfields@redhat.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
Supposes cache_check runs simultaneously with an update on a different
CPU:
cache_check task doing update
^^^^^^^^^^^ ^^^^^^^^^^^^^^^^^
1. test for CACHE_VALID 1'. set entry->data
& !CACHE_NEGATIVE
2. use entry->data 2'. set CACHE_VALID
If the two memory writes performed in step 1' and 2' appear misordered
with respect to the reads in step 1 and 2, then the caller could get
stale data at step 2 even though it saw CACHE_VALID set on the cache
entry.
Add memory barriers to prevent this.
Reviewed-by: NeilBrown <neilb@suse.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
We attempt to turn a cache entry negative in place. But that entry may
already have been filled in by some other task since we last checked
whether it was valid, so we could be modifying an already-valid entry.
If nothing else there's a likely leak in such a case when the entry is
eventually put() and contents are not freed because it has
CACHE_NEGATIVE set.
So, take the cache_lock just as sunrpc_cache_update() does.
Reviewed-by: NeilBrown <neilb@suse.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
Currently we use -EAGAIN returns to determine when to drop a deferred
request. On its own, that is error-prone, as it makes us treat -EAGAIN
returns from other functions specially to prevent inadvertent dropping.
So, use a flag on the request instead.
Returning an error on request deferral is still required, to prevent
further processing, but we no longer need worry that an error return on
its own could result in a drop.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
Commit d29068c431599fa "sunrpc: Simplify cache_defer_req and related
functions." asserted that cache_check() could determine success or
failure of cache_defer_req() by checking the CACHE_PENDING bit.
This isn't quite right.
We need to know whether cache_defer_req() created a deferred request,
in which case sending an rpc reply has become the responsibility of the
deferred request, and it is important that we not send our own reply,
resulting in two different replies to the same request.
And the CACHE_PENDING bit doesn't tell us that; we could have
succesfully created a deferred request at the same time as another
thread cleared the CACHE_PENDING bit.
So, partially revert that commit, to ensure that cache_check() returns
-EAGAIN if and only if a deferred request has been created.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Acked-by: NeilBrown <neilb@suse.de>
|
|
Signed-off-by: NeilBrown <neilb@suse.de>
[bfields@redhat.com: moved svcauth_unix_purge outside ifdef's.]
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
Once a sunrpc cache entry is VALID, we should be replacing it (and
allowing any concurrent users to destroy it on last put) instead of
trying to update it in place.
Otherwise someone referencing the ip_map we're modifying here could try
to use the m_client just as we're putting the last reference.
The bug should only be seen by users of the legacy nfsd interfaces.
(Thanks to Neil for suggestion to use sunrpc_invalidate.)
Reviewed-by: NeilBrown <neilb@suse.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
On Tue, 2010-12-14 at 16:58 +0800, Mi Jinlong wrote:
> Hi,
>
> When testing NFSv4 at RHEL6 with kernel 2.6.32, I got a kernel panic
> at NFS client's __rpc_create_common function.
>
> The panic place is:
> rpc_mkpipe
> __rpc_lookup_create() <=== find pipefile *idmap*
> __rpc_mkpipe() <=== pipefile is *idmap*
> __rpc_create_common()
> ****** BUG_ON(!d_unhashed(dentry)); ****** *panic*
>
> It means that the dentry's d_flags have be set DCACHE_UNHASHED,
> but it should not be set here.
>
> Is someone known this bug? or give me some idea?
>
> A reproduce program is append, but it can't reproduce the bug every time.
> the export is: "/nfsroot *(rw,no_root_squash,fsid=0,insecure)"
>
> And the panic message is append.
>
> ============================================================================
> #!/bin/sh
>
> LOOPTOTAL=768
> LOOPCOUNT=0
> ret=0
>
> while [ $LOOPCOUNT -ne $LOOPTOTAL ]
> do
> ((LOOPCOUNT += 1))
> service nfs restart
> /usr/sbin/rpc.idmapd
> mount -t nfs4 127.0.0.1:/ /mnt|| return 1;
> ls -l /var/lib/nfs/rpc_pipefs/nfs/*/
> umount /mnt
> echo $LOOPCOUNT
> done
>
> ===============================================================================
> Code: af 60 01 00 00 89 fa 89 f0 e8 64 cf 89 f0 e8 5c 7c 64 cf 31 c0 8b 5c 24 10 8b
> 74 24 14 8b 7c 24 18 8b 6c 24 1c 83 c4 20 c3 <0f> 0b eb fc 8b 46 28 c7 44 24 08 20
> de ee f0 c7 44 24 04 56 ea
> EIP:[<f0ee92ea>] __rpc_create_common+0x8a/0xc0 [sunrpc] SS:ESP 0068:eccb5d28
> ---[ end trace 8f5606cd08928ed2]---
> Kernel panic - not syncing: Fatal exception
> Pid:7131, comm: mount.nfs4 Tainted: G D -------------------2.6.32 #1
> Call Trace:
> [<c080ad18>] ? panic+0x42/0xed
> [<c080e42c>] ? oops_end+0xbc/0xd0
> [<c040b090>] ? do_invalid_op+0x0/0x90
> [<c040b10f>] ? do_invalid_op+0x7f/0x90
> [<f0ee92ea>] ? __rpc_create_common+0x8a/0xc0[sunrpc]
> [<f0edc433>] ? rpc_free_task+0x33/0x70[sunrpc]
> [<f0ed6508>] ? prc_call_sync+0x48/0x60[sunrpc]
> [<f0ed656e>] ? rpc_ping+0x4e/0x60[sunrpc]
> [<f0ed6eaf>] ? rpc_create+0x38f/0x4f0[sunrpc]
> [<c080d80b>] ? error_code+0x73/0x78
> [<f0ee92ea>] ? __rpc_create_common+0x8a/0xc0[sunrpc]
> [<c0532bda>] ? d_lookup+0x2a/0x40
> [<f0ee94b1>] ? rpc_mkpipe+0x111/0x1b0[sunrpc]
> [<f10a59f4>] ? nfs_create_rpc_client+0xb4/0xf0[nfs]
> [<f10d6c6d>] ? nfs_fscache_get_client_cookie+0x1d/0x50[nfs]
> [<f10d3fcb>] ? nfs_idmap_new+0x7b/0x140[nfs]
> [<c05e76aa>] ? strlcpy+0x3a/0x60
> [<f10a60ca>] ? nfs4_set_client+0xea/0x2b0[nfs]
> [<f10a6d0c>] ? nfs4_create_server+0xac/0x1b0[nfs]
> [<c04f1400>] ? krealloc+0x40/0x50
> [<f10b0e8b>] ? nfs4_remote_get_sb+0x6b/0x250[nfs]
> [<c04f14ec>] ? kstrdup+0x3c/0x60
> [<c0520739>] ? vfs_kern_mount+0x69/0x170
> [<f10b1a3c>] ? nfs_do_root_mount+0x6c/0xa0[nfs]
> [<f10b1b47>] ? nfs4_try_mount+0x37/0xa0[nfs]
> [<f10afe6d>] ? nfs4_validate_text_mount_data+-x7d/0xf0[nfs]
> [<f10b1c42>] ? nfs4_get_sb+0x92/0x2f0
> [<c0520739>] ? vfs_kern_mount+0x69/0x170
> [<c05366d2>] ? get_fs_type+0x32/0xb0
> [<c052089f>] ? do_kern_mount+0x3f/0xe0
> [<c053954f>] ? do_mount+0x2ef/0x740
> [<c0537740>] ? copy_mount_options+0xb0/0x120
> [<c0539a0e>] ? sys_mount+0x6e/0xa0
Hi,
Does the following patch fix the problem?
Cheers
Trond
--------------------------
SUNRPC: Fix a BUG in __rpc_create_common
From: Trond Myklebust <Trond.Myklebust@netapp.com>
Mi Jinlong reports:
When testing NFSv4 at RHEL6 with kernel 2.6.32, I got a kernel panic
at NFS client's __rpc_create_common function.
The panic place is:
rpc_mkpipe
__rpc_lookup_create() <=== find pipefile *idmap*
__rpc_mkpipe() <=== pipefile is *idmap*
__rpc_create_common()
****** BUG_ON(!d_unhashed(dentry)); ****** *panic*
The test is wrong: we can find ourselves with a hashed negative dentry here
if the idmapper tried to look up the file before we got round to creating
it.
Just replace the BUG_ON() with a d_drop(dentry).
Reported-by: Mi Jinlong <mijinlong@cn.fujitsu.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
Conflicts:
net/ipv4/fib_frontend.c
|
|
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
And remove unnecessary double semicolon too.
No effect to code, as test is != 0.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
These macros never be used for several years.
Signed-off-by: Shan Wei <shanwei@cn.fujitsu.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
Currently svc_sock_names calls svc_close_xprt on a svc_sock to
which it does not own a reference.
As soon as svc_close_xprt sets XPT_CLOSE, the socket could be
freed by a separate thread (though this is a very unlikely race).
It is safer to hold a reference while calling svc_close_xprt.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
The xpt_pool field is only used for reporting BUGs.
And it isn't used correctly.
In particular, when it is cleared in svc_xprt_received before
XPT_BUSY is cleared, there is no guarantee that either the
compiler or the CPU might not re-order to two assignments, just
setting xpt_pool to NULL after XPT_BUSY is cleared.
If a different cpu were running svc_xprt_enqueue at this moment,
it might see XPT_BUSY clear and then xpt_pool non-NULL, and
so BUG.
This could be fixed by calling
smp_mb__before_clear_bit()
before the clear_bit. However as xpt_pool isn't really used,
it seems safest to simply remove xpt_pool.
Another alternate would be to change the clear_bit to
clear_bit_unlock, and the test_and_set_bit to test_and_set_bit_lock.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
|
|
Now that all client-side XDR decoder routines use xdr_streams, there
should be no need to support the legacy calling sequence [rpc_rqst *,
__be32 *, RPC res *] anywhere. We can construct an xdr_stream in the
generic RPC code, instead of in each decoder function.
This is a refactoring change. It should not cause different behavior.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
Now that all client-side XDR encoder routines use xdr_streams, there
should be no need to support the legacy calling sequence [rpc_rqst *,
__be32 *, RPC arg *] anywhere. We can construct an xdr_stream in the
generic RPC code, instead of in each encoder function.
Also, all the client-side encoder functions return 0 now, making a
return value superfluous. Take this opportunity to convert them to
return void instead.
This is a refactoring change. It should not cause different behavior.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
Clean up.
Just fixed a panic where the nrprocs field in a different upper layer
client was set by hand incorrectly. Use the compiler-generated method
used by the other upper layer protocols.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
Clean up.
The trend in the other XDR encoder functions is to BUG() when encoding
problems occur, since a problem here is always due to a local coding
error. Then, instead of a status, zero is unconditionally returned.
Update the rpcbind XDR encoders to behave this way.
To finish the update, use the new-style be32_to_cpup() and
cpu_to_be32() macros, and compute the buffer sizes using raw integers
instead of sizeof(). This matches the conventions used in other XDR
functions.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
cancel_delayed_work_sync()
cancel_rearming_delayed_work[queue]() has been superceded by
cancel_delayed_work_sync() quite some time ago. Convert all the
in-kernel users. The conversions are completely equivalent and
trivial.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: "David S. Miller" <davem@davemloft.net>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Acked-by: Evgeniy Polyakov <zbr@ioremap.net>
Cc: Jeff Garzik <jgarzik@pobox.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Mauro Carvalho Chehab <mchehab@infradead.org>
Cc: netdev@vger.kernel.org
Cc: Anton Vorontsov <cbou@mail.ru>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: Neil Brown <neilb@suse.de>
Cc: Alex Elder <aelder@sgi.com>
Cc: xfs-masters@oss.sgi.com
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: netfilter-devel@vger.kernel.org
Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: linux-nfs@vger.kernel.org
|
|
When an xprt is created, it has a refcount of 1, and XPT_BUSY is set.
The refcount is *not* owned by the thread that created the xprt
(as is clear from the fact that creators never put the reference).
Rather, it is owned by the absence of XPT_DEAD. Once XPT_DEAD is set,
(And XPT_BUSY is clear) that initial reference is dropped and the xprt
can be freed.
So when a creator clears XPT_BUSY it is dropping its only reference and
so must not touch the xprt again.
However svc_recv, after calling ->xpo_accept (and so getting an XPT_BUSY
reference on a new xprt), calls svc_xprt_recieved. This clears
XPT_BUSY and then svc_xprt_enqueue - this last without owning a reference.
This is dangerous and has been seen to leave svc_xprt_enqueue working
with an xprt containing garbage.
So we need to hold an extra counted reference over that call to
svc_xprt_received.
For safety, any time we clear XPT_BUSY and then use the xprt again, we
first get a reference, and the put it again afterwards.
Note that svc_close_all does not need this extra protection as there are
no threads running, and the final free can only be called asynchronously
from such a thread.
Signed-off-by: NeilBrown <neilb@suse.de>
Cc: stable@kernel.org
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
If the rpcauth_refreshcred() call returns an error other than
EACCES, ENOMEM or ETIMEDOUT, we currently end up looping forever
between call_refresh and call_refreshresult.
The correct thing to do here is to exit on all errors except
EAGAIN and ETIMEDOUT, for which case we retry 3 times, then
return EACCES.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
Changed Makefile to use <modules>-y instead of <modules>-objs
because -objs is deprecated and not mentioned in
Documentation/kbuild/makefiles.txt.
Signed-off-by: Tracey Dent <tdent48227@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We call svc_xprt_enqueue() after something happens which we think may
require handling from a server thread. To avoid such events being lost,
svc_xprt_enqueue() must guarantee that there will be a svc_serv() call
from a server thread following any such event. It does that by either
waking up a server thread itself, or checking that XPT_BUSY is set (in
which case somebody else is doing it).
But the check of XPT_BUSY could occur just as someone finishes
processing some other event, and just before they clear XPT_BUSY.
Therefore it's important not to clear XPT_BUSY without subsequently
doing another svc_export_enqueue() to check whether the xprt should be
requeued.
The xpo_wspace() check in svc_xprt_enqueue() breaks this rule, allowing
an event to be missed in situations like:
data arrives
call svc_tcp_data_ready():
call svc_xprt_enqueue():
set BUSY
find no write space
svc_reserve():
free up write space
call svc_enqueue():
test BUSY
clear BUSY
So, instead, check wspace in the same places that the state flags are
checked: before taking BUSY, and in svc_receive().
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
Neil Brown had to explain to me why we do this here; record the answer
for posterity.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
There's no need to be fooling with XPT_BUSY now that all the threads
are gone.
The list_del_init() here could execute at the same time as the
svc_xprt_enqueue()'s list_add_tail(), with undefined results. We don't
really care at this point, but it might result in a spurious
list-corruption warning or something.
And svc_close() isn't adding any value; just call svc_delete_xprt()
directly.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
Follow up on b48fa6b99100dc7772af3cd276035fcec9719ceb by moving all the
svc_xprt_received() calls for the main xprt to one place. The clearing
of XPT_BUSY here is critical to the correctness of the server, so I'd
prefer it to be obvious where we do it.
The only substantive result is moving svc_xprt_received() after
svc_receive_deferred(). Other than a (likely insignificant) delay
waking up the next thread, that should be harmless.
Also reshuffle the exit code a little to skip a few other steps that we
don't care about the in the svc_delete_xprt() case.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
There's no harm to doing this, since the only caller will immediately
call svc_enqueue() afterwards, ensuring we don't miss the remaining
deferred requests just because XPT_DEFERRED was briefly cleared.
But why not just do this the simple way?
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
The big kernel lock has been removed from all these files at some point,
leaving only the #include.
Remove this too as a cleanup.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Hi,
We can simplify net/sunrpc/stats.c::rpc_alloc_iostats() a bit by getting
rid of the unneeded local variable 'new'.
Please CC me on replies.
Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: (52 commits)
split invalidate_inodes()
fs: skip I_FREEING inodes in writeback_sb_inodes
fs: fold invalidate_list into invalidate_inodes
fs: do not drop inode_lock in dispose_list
fs: inode split IO and LRU lists
fs: switch bdev inode bdi's correctly
fs: fix buffer invalidation in invalidate_list
fsnotify: use dget_parent
smbfs: use dget_parent
exportfs: use dget_parent
fs: use RCU read side protection in d_validate
fs: clean up dentry lru modification
fs: split __shrink_dcache_sb
fs: improve DCACHE_REFERENCED usage
fs: use percpu counter for nr_dentry and nr_dentry_unused
fs: simplify __d_free
fs: take dcache_lock inside __d_path
fs: do not assign default i_ino in new_inode
fs: introduce a per-cpu last_ino allocator
new helper: ihold()
...
|
|
* 'for-2.6.37' of git://linux-nfs.org/~bfields/linux: (99 commits)
svcrpc: svc_tcp_sendto XPT_DEAD check is redundant
svcrpc: no need for XPT_DEAD check in svc_xprt_enqueue
svcrpc: assume svc_delete_xprt() called only once
svcrpc: never clear XPT_BUSY on dead xprt
nfsd4: fix connection allocation in sequence()
nfsd4: only require krb5 principal for NFSv4.0 callbacks
nfsd4: move minorversion to client
nfsd4: delay session removal till free_client
nfsd4: separate callback change and callback probe
nfsd4: callback program number is per-session
nfsd4: track backchannel connections
nfsd4: confirm only on succesful create_session
nfsd4: make backchannel sequence number per-session
nfsd4: use client pointer to backchannel session
nfsd4: move callback setup into session init code
nfsd4: don't cache seq_misordered replies
SUNRPC: Properly initialize sock_xprt.srcaddr in all cases
SUNRPC: Use conventional switch statement when reclassifying sockets
sunrpc/xprtrdma: clean up workqueue usage
sunrpc: Turn list_for_each-s into the ..._entry-s
...
Fix up trivial conflicts (two different deprecation notices added in
separate branches) in Documentation/feature-removal-schedule.txt
|
|
git://git.linux-nfs.org/projects/trondmy/nfs-2.6
* 'nfs-for-2.6.37' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6:
net/sunrpc: Use static const char arrays
nfs4: fix channel attribute sanity-checks
NFSv4.1: Use more sensible names for 'initialize_mountpoint'
NFSv4.1: pnfs: filelayout: add driver's LAYOUTGET and GETDEVICEINFO infrastructure
NFSv4.1: pnfs: add LAYOUTGET and GETDEVICEINFO infrastructure
NFS: client needs to maintain list of inodes with active layouts
NFS: create and destroy inode's layout cache
NFSv4.1: pnfs: filelayout: introduce minimal file layout driver
NFSv4.1: pnfs: full mount/umount infrastructure
NFS: set layout driver
NFS: ask for layouttypes during v4 fsinfo call
NFS: change stateid to be a union
NFSv4.1: pnfsd, pnfs: protocol level pnfs constants
SUNRPC: define xdr_decode_opaque_fixed
NFSD: remove duplicate NFS4_STATEID_SIZE
|
|
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
Instead of always assigning an increasing inode number in new_inode
move the call to assign it into those callers that actually need it.
For now callers that need it is estimated conservatively, that is
the call is added to all filesystems that do not assign an i_ino
by themselves. For a few more filesystems we can avoid assigning
any inode number given that they aren't user visible, and for others
it could be done lazily when an inode number is actually needed,
but that's left for later patches.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
The only caller (svc_send) has already checked XPT_DEAD.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
If any xprt marked DEAD is also left BUSY for the rest of its life, then
the XPT_DEAD check here is superfluous--we'll get the same result from
the XPT_BUSY check just after.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
As long as DEAD exports are left BUSY, and svc_delete_xprt is called
only with BUSY held, then svc_delete_xprt() will never be called on an
xprt that is already DEAD.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
Once an xprt has been deleted, there's no reason to allow it to be
enqueued--at worst, that might cause the xprt to be re-added to some
global list, resulting in later corruption.
Also, note this leaves us with no need for the reference-count
manipulation here.
Reviewed-by: NeilBrown <neilb@suse.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
git://git.linux-nfs.org/projects/trondmy/nfs-2.6
* 'nfs-for-2.6.37' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6: (67 commits)
SUNRPC: Cleanup duplicate assignment in rpcauth_refreshcred
nfs: fix unchecked value
Ask for time_delta during fsinfo probe
Revalidate caches on lock
SUNRPC: After calling xprt_release(), we must restart from call_reserve
NFSv4: Fix up the 'dircount' hint in encode_readdir
NFSv4: Clean up nfs4_decode_dirent
NFSv4: nfs4_decode_dirent must clear entry->fattr->valid
NFSv4: Fix a regression in decode_getfattr
NFSv4: Fix up decode_attr_filehandle() to handle the case of empty fh pointer
NFS: Ensure we check all allocation return values in new readdir code
NFS: Readdir plus in v4
NFS: introduce generic decode_getattr function
NFS: check xdr_decode for errors
NFS: nfs_readdir_filler catch all errors
NFS: readdir with vmapped pages
NFS: remove page size checking code
NFS: decode_dirent should use an xdr_stream
SUNRPC: Add a helper function xdr_inline_peek
NFS: remove readdir plus limit
...
|
|
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
Rob Leslie reports seeing the following Oops after his Kerberos session
expired.
BUG: unable to handle kernel NULL pointer dereference at 00000058
IP: [<e186ed94>] rpcauth_refreshcred+0x11/0x12c [sunrpc]
*pde = 00000000
Oops: 0000 [#1]
last sysfs file: /sys/devices/platform/pc87360.26144/temp3_input
Modules linked in: autofs4 authenc esp4 xfrm4_mode_transport ipt_LOG ipt_REJECT xt_limit xt_state ipt_REDIRECT xt_owner xt_HL xt_hl xt_tcpudp xt_mark cls_u32 cls_tcindex sch_sfq sch_htb sch_dsmark geodewdt deflate ctr twofish_generic twofish_i586 twofish_common camellia serpent blowfish cast5 cbc xcbc rmd160 sha512_generic sha1_generic hmac crypto_null af_key rpcsec_gss_krb5 nfsd exportfs nfs lockd fscache nfs_acl auth_rpcgss sunrpc ip_gre sit tunnel4 dummy ext3 jbd nf_nat_irc nf_conntrack_irc nf_nat_ftp nf_conntrack_ftp iptable_mangle iptable_nat nf_nat nf_conntrack_ipv4 nf_conntrack nf_defrag_ipv4 iptable_filter ip_tables x_tables pc8736x_gpio nsc_gpio pc87360 hwmon_vid loop aes_i586 aes_generic sha256_generic dm_crypt cs5535_gpio serio_raw cs5535_mfgpt hifn_795x des_generic geode_rng rng_core led_class ext4 mbcache jbd2 crc16 dm_mirror dm_region_hash dm_log dm_snapshot dm_mod sd_mod crc_t10dif ide_pci_generic cs5536 amd74xx ide_core pata_cs5536 ata_generic libata usb_storage via_rhine mii scsi_mod btrfs zlib_deflate crc32c libcrc32c [last unloaded: scsi_wait_scan]
Pid: 12875, comm: sudo Not tainted 2.6.36-net5501 #1 /
EIP: 0060:[<e186ed94>] EFLAGS: 00010292 CPU: 0
EIP is at rpcauth_refreshcred+0x11/0x12c [sunrpc]
EAX: 00000000 EBX: defb13a0 ECX: 00000006 EDX: e18683b8
ESI: defb13a0 EDI: 00000000 EBP: 00000000 ESP: de571d58
DS: 007b ES: 007b FS: 0000 GS: 0033 SS: 0068
Process sudo (pid: 12875, ti=de570000 task=decd1430 task.ti=de570000)
Stack:
e186e008 00000000 defb13a0 0000000d deda6000 e1868f22 e196f12b defb13a0
<0> defb13d8 00000000 00000000 e186e0aa 00000000 defb13a0 de571dac 00000000
<0> e186956c de571e34 debea5c0 de571dc8 e186967a 00000000 debea5c0 de571e34
Call Trace:
[<e186e008>] ? rpc_wake_up_next+0x114/0x11b [sunrpc]
[<e1868f22>] ? call_decode+0x24a/0x5af [sunrpc]
[<e196f12b>] ? nfs4_xdr_dec_access+0x0/0xa2 [nfs]
[<e186e0aa>] ? __rpc_execute+0x62/0x17b [sunrpc]
[<e186956c>] ? rpc_run_task+0x91/0x97 [sunrpc]
[<e186967a>] ? rpc_call_sync+0x40/0x5b [sunrpc]
[<e1969ca2>] ? nfs4_proc_access+0x10a/0x176 [nfs]
[<e19572fa>] ? nfs_do_access+0x2b1/0x2c0 [nfs]
[<e186ed61>] ? rpcauth_lookupcred+0x62/0x84 [sunrpc]
[<e19573b6>] ? nfs_permission+0xad/0x13b [nfs]
[<c0177824>] ? exec_permission+0x15/0x4b
[<c0177fbd>] ? link_path_walk+0x4f/0x456
[<c017867d>] ? path_walk+0x4c/0xa8
[<c0179678>] ? do_path_lookup+0x1f/0x68
[<c017a3fb>] ? user_path_at+0x37/0x5f
[<c016359c>] ? handle_mm_fault+0x229/0x55b
[<c0170a2d>] ? sys_faccessat+0x93/0x146
[<c0170aef>] ? sys_access+0xf/0x13
[<c02cf615>] ? syscall_call+0x7/0xb
Code: 0f 94 c2 84 d2 74 09 8b 44 24 0c e8 6a e9 8b de 83 c4 14 89 d8 5b 5e 5f 5d c3 55 57 56 53 83 ec 1c fc 89 c6 8b 40 10 89 44 24 04 <8b> 58 58 85 db 0f 85 d4 00 00 00 0f b7 46 70 8b 56 20 89 c5 83
EIP: [<e186ed94>] rpcauth_refreshcred+0x11/0x12c [sunrpc] SS:ESP 0068:de571d58
CR2: 0000000000000058
This appears to be caused by the function rpc_verify_header() first
calling xprt_release(), then doing a call_refresh. If we release the
transport slot, we should _always_ jump back to call_reserve before
calling anything else.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: stable@kernel.org
|
