summaryrefslogtreecommitdiff
path: root/net/tipc
AgeCommit message (Collapse)Author
2017-06-17tipc: ignore requests when the connection state is not CONNECTEDParthasarathy Bhuvaragan
[ Upstream commit 4c887aa65d38633885010277f3482400681be719 ] In tipc_conn_sendmsg(), we first queue the request to the outqueue followed by the connection state check. If the connection is not connected, we should not queue this message. In this commit, we reject the messages if the connection state is not CF_CONNECTED. Acked-by: Ying Xue <ying.xue@windriver.com> Acked-by: Jon Maloy <jon.maloy@ericsson.com> Tested-by: John Thompson <thompa.atl@gmail.com> Signed-off-by: Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-04-30tipc: check minimum bearer MTUMichal Kubeček
commit 3de81b758853f0b29c61e246679d20b513c4cfec upstream. Qian Zhang (张谦) reported a potential socket buffer overflow in tipc_msg_build() which is also known as CVE-2016-8632: due to insufficient checks, a buffer overflow can occur if MTU is too short for even tipc headers. As anyone can set device MTU in a user/net namespace, this issue can be abused by a regular user. As agreed in the discussion on Ben Hutchings' original patch, we should check the MTU at the moment a bearer is attached rather than for each processed packet. We also need to repeat the check when bearer MTU is adjusted to new device MTU. UDP case also needs a check to avoid overflow when calculating bearer MTU. Fixes: b97bf3fd8f6a ("[TIPC] Initial merge") Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Reported-by: Qian Zhang (张谦) <zhangqian-c@360.cn> Acked-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net> [bwh: Backported to 4.4: - Adjust context - NETDEV_GOING_DOWN and NETDEV_CHANGEMTU cases in net notifier were combined] Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-04-30tipc: fix socket timer deadlockJon Paul Maloy
commit f1d048f24e66ba85d3dabf3d076cefa5f2b546b0 upstream. We sometimes observe a 'deadly embrace' type deadlock occurring between mutually connected sockets on the same node. This happens when the one-hour peer supervision timers happen to expire simultaneously in both sockets. The scenario is as follows: CPU 1: CPU 2: -------- -------- tipc_sk_timeout(sk1) tipc_sk_timeout(sk2) lock(sk1.slock) lock(sk2.slock) msg_create(probe) msg_create(probe) unlock(sk1.slock) unlock(sk2.slock) tipc_node_xmit_skb() tipc_node_xmit_skb() tipc_node_xmit() tipc_node_xmit() tipc_sk_rcv(sk2) tipc_sk_rcv(sk1) lock(sk2.slock) lock((sk1.slock) filter_rcv() filter_rcv() tipc_sk_proto_rcv() tipc_sk_proto_rcv() msg_create(probe_rsp) msg_create(probe_rsp) tipc_sk_respond() tipc_sk_respond() tipc_node_xmit_skb() tipc_node_xmit_skb() tipc_node_xmit() tipc_node_xmit() tipc_sk_rcv(sk1) tipc_sk_rcv(sk2) lock((sk1.slock) lock((sk2.slock) ===> DEADLOCK ===> DEADLOCK Further analysis reveals that there are three different locations in the socket code where tipc_sk_respond() is called within the context of the socket lock, with ensuing risk of similar deadlocks. We now solve this by passing a buffer queue along with all upcalls where sk_lock.slock may potentially be held. Response or rejected message buffers are accumulated into this queue instead of being sent out directly, and only sent once we know we are safely outside the slock context. Reported-by: GUNA <gbalasun@gmail.com> Acked-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-04-30tipc: fix random link resets while adding a second bearerParthasarathy Bhuvaragan
commit d2f394dc4816b7bd1b44981d83509f18f19c53f0 upstream. In a dual bearer configuration, if the second tipc link becomes active while the first link still has pending nametable "bulk" updates, it randomly leads to reset of the second link. When a link is established, the function named_distribute(), fills the skb based on node mtu (allows room for TUNNEL_PROTOCOL) with NAME_DISTRIBUTOR message for each PUBLICATION. However, the function named_distribute() allocates the buffer by increasing the node mtu by INT_H_SIZE (to insert NAME_DISTRIBUTOR). This consumes the space allocated for TUNNEL_PROTOCOL. When establishing the second link, the link shall tunnel all the messages in the first link queue including the "bulk" update. As size of the NAME_DISTRIBUTOR messages while tunnelling, exceeds the link mtu the transmission fails (-EMSGSIZE). Thus, the synch point based on the message count of the tunnel packets is never reached leading to link timeout. In this commit, we adjust the size of name distributor message so that they can be tunnelled. Reviewed-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-04-30tipc: correct error in node fsmJon Paul Maloy
commit c4282ca76c5b81ed73ef4c5eb5c07ee397e51642 upstream. commit 88e8ac7000dc ("tipc: reduce transmission rate of reset messages when link is down") revealed a flaw in the node FSM, as defined in the log of commit 66996b6c47ed ("tipc: extend node FSM"). We see the following scenario: 1: Node B receives a RESET message from node A before its link endpoint is fully up, i.e., the node FSM is in state SELF_UP_PEER_COMING. This event will not change the node FSM state, but the (distinct) link FSM will move to state RESETTING. 2: As an effect of the previous event, the local endpoint on B will declare node A lost, and post the event SELF_DOWN to the its node FSM. This moves the FSM state to SELF_DOWN_PEER_LEAVING, meaning that no messages will be accepted from A until it receives another RESET message that confirms that A's endpoint has been reset. This is wasteful, since we know this as a fact already from the first received RESET, but worse is that the link instance's FSM has not wasted this information, but instead moved on to state ESTABLISHING, meaning that it repeatedly sends out ACTIVATE messages to the reset peer A. 3: Node A will receive one of the ACTIVATE messages, move its link FSM to state ESTABLISHED, and start repeatedly sending out STATE messages to node B. 4: Node B will consistently drop these messages, since it can only accept accept a RESET according to its node FSM. 5: After four lost STATE messages node A will reset its link and start repeatedly sending out RESET messages to B. 6: Because of the reduced send rate for RESET messages, it is very likely that A will receive an ACTIVATE (which is sent out at a much higher frequency) before it gets the chance to send a RESET, and A may hence quickly move back to state ESTABLISHED and continue sending out STATE messages, which will again be dropped by B. 7: GOTO 5. 8: After having repeated the cycle 5-7 a number of times, node A will by chance get in between with sending a RESET, and the situation is resolved. Unfortunately, we have seen that it may take a substantial amount of time before this vicious loop is broken, sometimes in the order of minutes. We correct this by making a small correction to the node FSM: When a node in state SELF_UP_PEER_COMING receives a SELF_DOWN event, it now moves directly back to state SELF_DOWN_PEER_DOWN, instead of as now SELF_DOWN_PEER_LEAVING. This is logically consistent, since we don't need to wait for RESET confirmation from of an endpoint that we alread know has been reset. It also means that node B in the scenario above will not be dropping incoming STATE messages, and the link can come up immediately. Finally, a symmetry comparison reveals that the FSM has a similar error when receiving the event PEER_DOWN in state PEER_UP_SELF_COMING. Instead of moving to PERR_DOWN_SELF_LEAVING, it should move directly to SELF_DOWN_PEER_DOWN. Although we have never seen any negative effect of this logical error, we choose fix this one, too. The node FSM looks as follows after those changes: +----------------------------------------+ | PEER_DOWN_EVT| | | +------------------------+----------------+ | |SELF_DOWN_EVT | | | | | | | | +-----------+ +-----------+ | | |NODE_ | |NODE_ | | | +----------|FAILINGOVER|<---------|SYNCHING |-----------+ | | |SELF_ +-----------+ FAILOVER_+-----------+ PEER_ | | | |DOWN_EVT | A BEGIN_EVT A | DOWN_EVT| | | | | | | | | | | | | | | | | | | | |FAILOVER_ |FAILOVER_ |SYNCH_ |SYNCH_ | | | | |END_EVT |BEGIN_EVT |BEGIN_EVT|END_EVT | | | | | | | | | | | | | | | | | | | | | +--------------+ | | | | | +-------->| SELF_UP_ |<-------+ | | | | +-----------------| PEER_UP |----------------+ | | | | |SELF_DOWN_EVT +--------------+ PEER_DOWN_EVT| | | | | | A A | | | | | | | | | | | | | | PEER_UP_EVT| |SELF_UP_EVT | | | | | | | | | | | V V V | | V V V +------------+ +-----------+ +-----------+ +------------+ |SELF_DOWN_ | |SELF_UP_ | |PEER_UP_ | |PEER_DOWN | |PEER_LEAVING| |PEER_COMING| |SELF_COMING| |SELF_LEAVING| +------------+ +-----------+ +-----------+ +------------+ | | A A | | | | | | | | | SELF_ | |SELF_ |PEER_ |PEER_ | | DOWN_EVT| |UP_EVT |UP_EVT |DOWN_EVT | | | | | | | | | | | | | | | +--------------+ | | |PEER_DOWN_EVT +--->| SELF_DOWN_ |<---+ SELF_DOWN_EVT| +------------------->| PEER_DOWN |<--------------------+ +--------------+ Acked-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-04-30tipc: re-enable compensation for socket receive buffer double countingJon Paul Maloy
commit 7c8bcfb1255fe9d929c227d67bdcd84430fd200b upstream. In the refactoring commit d570d86497ee ("tipc: enqueue arrived buffers in socket in separate function") we did by accident replace the test if (sk->sk_backlog.len == 0) atomic_set(&tsk->dupl_rcvcnt, 0); with if (sk->sk_backlog.len) atomic_set(&tsk->dupl_rcvcnt, 0); This effectively disables the compensation we have for the double receive buffer accounting that occurs temporarily when buffers are moved from the backlog to the socket receive queue. Until now, this has gone unnoticed because of the large receive buffer limits we are applying, but becomes indispensable when we reduce this buffer limit later in this series. We now fix this by inverting the mentioned condition. Acked-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-04-30tipc: make dist queue pernetErik Hugne
commit 541726abe7daca64390c2ec34e6a203145f1686d upstream. Nametable updates received from the network that cannot be applied immediately are placed on a defer queue. This queue is global to the TIPC module, which might cause problems when using TIPC in containers. To prevent nametable updates from escaping into the wrong namespace, we make the queue pernet instead. Signed-off-by: Erik Hugne <erik.hugne@gmail.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-04-30tipc: make sure IPv6 header fits in skb headroomRichard Alpe
commit 9bd160bfa27fa41927dbbce7ee0ea779700e09ef upstream. Expand headroom further in order to be able to fit the larger IPv6 header. Prior to this patch this caused a skb under panic for certain tipc packets when using IPv6 UDP bearer(s). Signed-off-by: Richard Alpe <richard.alpe@ericsson.com> Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-04-27tipc: fix crash during node removalJon Paul Maloy
commit d25a01257e422a4bdeb426f69529d57c73b235fe upstream. When the TIPC module is unloaded, we have identified a race condition that allows a node reference counter to go to zero and the node instance being freed before the node timer is finished with accessing it. This leads to occasional crashes, especially in multi-namespace environments. The scenario goes as follows: CPU0:(node_stop) CPU1:(node_timeout) // ref == 2 1: if(!mod_timer()) 2: if (del_timer()) 3: tipc_node_put() // ref -> 1 4: tipc_node_put() // ref -> 0 5: kfree_rcu(node); 6: tipc_node_get(node) 7: // BOOM! We now clean up this functionality as follows: 1) We remove the node pointer from the node lookup table before we attempt deactivating the timer. This way, we reduce the risk that tipc_node_find() may obtain a valid pointer to an instance marked for deletion; a harmless but undesirable situation. 2) We use del_timer_sync() instead of del_timer() to safely deactivate the node timer without any risk that it might be reactivated by the timeout handler. There is no risk of deadlock here, since the two functions never touch the same spinlocks. 3: We remove a pointless tipc_node_get() + tipc_node_put() from the timeout handler. Reported-by: Zhijiang Hu <huzhijiang@gmail.com> Acked-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-30tipc: fix NULL pointer dereference in shutdown()Vegard Nossum
[ Upstream commit d2fbdf76b85bcdfe57b8ef2ba09d20e8ada79abd ] tipc_msg_create() can return a NULL skb and if so, we shouldn't try to call tipc_node_xmit_skb() on it. general protection fault: 0000 [#1] PREEMPT SMP KASAN CPU: 3 PID: 30298 Comm: trinity-c0 Not tainted 4.7.0-rc7+ #19 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 task: ffff8800baf09980 ti: ffff8800595b8000 task.ti: ffff8800595b8000 RIP: 0010:[<ffffffff830bb46b>] [<ffffffff830bb46b>] tipc_node_xmit_skb+0x6b/0x140 RSP: 0018:ffff8800595bfce8 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 000000003023b0e0 RDX: 0000000000000000 RSI: dffffc0000000000 RDI: ffffffff83d12580 RBP: ffff8800595bfd78 R08: ffffed000b2b7f32 R09: 0000000000000000 R10: fffffbfff0759725 R11: 0000000000000000 R12: 1ffff1000b2b7f9f R13: ffff8800595bfd58 R14: ffffffff83d12580 R15: dffffc0000000000 FS: 00007fcdde242700(0000) GS:ffff88011af80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fcddde1db10 CR3: 000000006874b000 CR4: 00000000000006e0 DR0: 00007fcdde248000 DR1: 00007fcddd73d000 DR2: 00007fcdde248000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000090602 Stack: 0000000000000018 0000000000000018 0000000041b58ab3 ffffffff83954208 ffffffff830bb400 ffff8800595bfd30 ffffffff8309d767 0000000000000018 0000000000000018 ffff8800595bfd78 ffffffff8309da1a 00000000810ee611 Call Trace: [<ffffffff830c84a3>] tipc_shutdown+0x553/0x880 [<ffffffff825b4a3b>] SyS_shutdown+0x14b/0x170 [<ffffffff8100334c>] do_syscall_64+0x19c/0x410 [<ffffffff83295ca5>] entry_SYSCALL64_slow_path+0x25/0x25 Code: 90 00 b4 0b 83 c7 00 f1 f1 f1 f1 4c 8d 6d e0 c7 40 04 00 00 00 f4 c7 40 08 f3 f3 f3 f3 48 89 d8 48 c1 e8 03 c7 45 b4 00 00 00 00 <80> 3c 30 00 75 78 48 8d 7b 08 49 8d 75 c0 48 b8 00 00 00 00 00 RIP [<ffffffff830bb46b>] tipc_node_xmit_skb+0x6b/0x140 RSP <ffff8800595bfce8> ---[ end trace 57b0484e351e71f1 ]--- I feel like we should maybe return -ENOMEM or -ENOBUFS, but I'm not sure userspace is equipped to handle that. Anyway, this is better than a GPF and looks somewhat consistent with other tipc_msg_create() callers. Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com> Acked-by: Ying Xue <ying.xue@windriver.com> Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-24tipc: move linearization of buffers to generic codeJon Paul Maloy
commit c7cad0d6f70cd4ce8644ffe528a4df1cdc2e77f5 upstream. In commit 5cbb28a4bf65c7e4 ("tipc: linearize arriving NAME_DISTR and LINK_PROTO buffers") we added linearization of NAME_DISTRIBUTOR, LINK_PROTOCOL/RESET and LINK_PROTOCOL/ACTIVATE to the function tipc_udp_recv(). The location of the change was selected in order to make the commit easily appliable to 'net' and 'stable'. We now move this linearization to where it should be done, in the functions tipc_named_rcv() and tipc_link_proto_rcv() respectively. Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Juerg Haefliger <juerg.haefliger@hpe.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-15tipc: fix nl compat regression for link statisticsRichard Alpe
[ Upstream commit 55e77a3e8297581c919b45adcc4d0815b69afa84 ] Fix incorrect use of nla_strlcpy() where the first NLA_HDRLEN bytes of the link name where left out. Making the output of tipc-config -ls look something like: Link statistics: dcast-link 1:data0-1.1.2:data0 1:data0-1.1.3:data0 Also, for the record, the patch that introduce this regression claims "Sending the whole object out can cause a leak". Which isn't very likely as this is a compat layer, where the data we are parsing is generated by us and we know the string to be NULL terminated. But you can of course never be to secure. Fixes: 5d2be1422e02 (tipc: fix an infoleak in tipc_nl_compat_link_dump) Signed-off-by: Richard Alpe <richard.alpe@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-15tipc: fix an infoleak in tipc_nl_compat_link_dumpKangjie Lu
[ Upstream commit 5d2be1422e02ccd697ccfcd45c85b4a26e6178e2 ] link_info.str is a char array of size 60. Memory after the NULL byte is not initialized. Sending the whole object out can cause a leak. Signed-off-by: Kangjie Lu <kjlu@gatech.edu> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-15tipc: fix nullptr crash during subscription cancelParthasarathy Bhuvaragan
[ Upstream commit 4de13d7ed6ffdcbb34317acaa9236f121176f5f8 ] commit 4d5cfcba2f6e ('tipc: fix connection abort during subscription cancel'), removes the check for a valid subscription before calling tipc_nametbl_subscribe(). This will lead to a nullptr exception when we process a subscription cancel request. For a cancel request, a null subscription is passed to tipc_nametbl_subscribe() resulting in exception. In this commit, we call tipc_nametbl_subscribe() only for a valid subscription. Fixes: 4d5cfcba2f6e ('tipc: fix connection abort during subscription cancel') Reported-by: Anders Widell <anders.widell@ericsson.com> Signed-off-by: Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com> Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-24tipc: fix nametable publication field in nl compatRichard Alpe
[ Upstream commit 03aaaa9b941e136757b55c4cf775aab6068dfd94 ] The publication field of the old netlink API should contain the publication key and not the publication reference. Fixes: 44a8ae94fd55 (tipc: convert legacy nl name table dump to nl compat) Signed-off-by: Richard Alpe <richard.alpe@ericsson.com> Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-24tipc: check nl sock before parsing nested attributesRichard Alpe
[ Upstream commit 45e093ae2830cd1264677d47ff9a95a71f5d9f9c ] Make sure the socket for which the user is listing publication exists before parsing the socket netlink attributes. Prior to this patch a call without any socket caused a NULL pointer dereference in tipc_nl_publ_dump(). Tested-and-reported-by: Baozeng Ding <sploving1@gmail.com> Signed-off-by: Richard Alpe <richard.alpe@ericsson.com> Acked-by: Jon Maloy <jon.maloy@ericsson.cm> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-20tipc: Revert "tipc: use existing sk_write_queue for outgoing packet chain"Parthasarathy Bhuvaragan
[ Upstream commit f214fc402967e1bc94ad7f39faa03db5813d6849 ] reverts commit 94153e36e709e ("tipc: use existing sk_write_queue for outgoing packet chain") In Commit 94153e36e709e, we assume that we fill & empty the socket's sk_write_queue within the same lock_sock() session. This is not true if the link is congested. During congestion, the socket lock is released while we wait for the congestion to cease. This implementation causes a nullptr exception, if the user space program has several threads accessing the same socket descriptor. Consider two threads of the same program performing the following: Thread1 Thread2 -------------------- ---------------------- Enter tipc_sendmsg() Enter tipc_sendmsg() lock_sock() lock_sock() Enter tipc_link_xmit(), ret=ELINKCONG spin on socket lock.. sk_wait_event() : release_sock() grab socket lock : Enter tipc_link_xmit(), ret=0 : release_sock() Wakeup after congestion lock_sock() skb = skb_peek(pktchain); !! TIPC_SKB_CB(skb)->wakeup_pending = tsk->link_cong; In this case, the second thread transmits the buffers belonging to both thread1 and thread2 successfully. When the first thread wakeup after the congestion it assumes that the pktchain is intact and operates on the skb's in it, which leads to the following exception: [2102.439969] BUG: unable to handle kernel NULL pointer dereference at 00000000000000d0 [2102.440074] IP: [<ffffffffa005f330>] __tipc_link_xmit+0x2b0/0x4d0 [tipc] [2102.440074] PGD 3fa3f067 PUD 3fa6b067 PMD 0 [2102.440074] Oops: 0000 [#1] SMP [2102.440074] CPU: 2 PID: 244 Comm: sender Not tainted 3.12.28 #1 [2102.440074] RIP: 0010:[<ffffffffa005f330>] [<ffffffffa005f330>] __tipc_link_xmit+0x2b0/0x4d0 [tipc] [...] [2102.440074] Call Trace: [2102.440074] [<ffffffff8163f0b9>] ? schedule+0x29/0x70 [2102.440074] [<ffffffffa006a756>] ? tipc_node_unlock+0x46/0x170 [tipc] [2102.440074] [<ffffffffa005f761>] tipc_link_xmit+0x51/0xf0 [tipc] [2102.440074] [<ffffffffa006d8ae>] tipc_send_stream+0x11e/0x4f0 [tipc] [2102.440074] [<ffffffff8106b150>] ? __wake_up_sync+0x20/0x20 [2102.440074] [<ffffffffa006dc9c>] tipc_send_packet+0x1c/0x20 [tipc] [2102.440074] [<ffffffff81502478>] sock_sendmsg+0xa8/0xd0 [2102.440074] [<ffffffff81507895>] ? release_sock+0x145/0x170 [2102.440074] [<ffffffff815030d8>] ___sys_sendmsg+0x3d8/0x3e0 [2102.440074] [<ffffffff816426ae>] ? _raw_spin_unlock+0xe/0x10 [2102.440074] [<ffffffff81115c2a>] ? handle_mm_fault+0x6ca/0x9d0 [2102.440074] [<ffffffff8107dd65>] ? set_next_entity+0x85/0xa0 [2102.440074] [<ffffffff816426de>] ? _raw_spin_unlock_irq+0xe/0x20 [2102.440074] [<ffffffff8107463c>] ? finish_task_switch+0x5c/0xc0 [2102.440074] [<ffffffff8163ea8c>] ? __schedule+0x34c/0x950 [2102.440074] [<ffffffff81504e12>] __sys_sendmsg+0x42/0x80 [2102.440074] [<ffffffff81504e62>] SyS_sendmsg+0x12/0x20 [2102.440074] [<ffffffff8164aed2>] system_call_fastpath+0x16/0x1b In this commit, we maintain the skb list always in the stack. Signed-off-by: Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com> Acked-by: Ying Xue <ying.xue@windriver.com> Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-03tipc: unlock in error pathInsu Yun
[ Upstream commit b53ce3e7d407aa4196877a48b8601181162ab158 ] tipc_bcast_unlock need to be unlocked in error path. Signed-off-by: Insu Yun <wuninsu@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-03tipc: fix premature addition of node to lookup tableJon Paul Maloy
[ Upstream commit d5c91fb72f1652ea3026925240a0998a42ddb16b ] In commit 5266698661401a ("tipc: let broadcast packet reception use new link receive function") we introduced a new per-node broadcast reception link instance. This link is created at the moment the node itself is created. Unfortunately, the allocation is done after the node instance has already been added to the node lookup hash table. This creates a potential race condition, where arriving broadcast packets are able to find and access the node before it has been fully initialized, and before the above mentioned link has been created. The result is occasional crashes in the function tipc_bcast_rcv(), which is trying to access the not-yet existing link. We fix this by deferring the addition of the node instance until after it has been fully initialized in the function tipc_node_create(). Acked-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-03tipc: fix connection abort during subscription cancelParthasarathy Bhuvaragan
[ Upstream commit 4d5cfcba2f6ec494d8810b9e3c0a7b06255c8067 ] In 'commit 7fe8097cef5f ("tipc: fix nullpointer bug when subscribing to events")', we terminate the connection if the subscription creation fails. In the same commit, the subscription creation result was based on the value of the subscription pointer (set in the function) instead of the return code. Unfortunately, the same function tipc_subscrp_create() handles subscription cancel request. For a subscription cancellation request, the subscription pointer cannot be set. Thus if a subscriber has several subscriptions and cancels any of them, the connection is terminated. In this commit, we terminate the connection based on the return value of tipc_subscrp_create(). Fixes: commit 7fe8097cef5f ("tipc: fix nullpointer bug when subscribing to events") Reviewed-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-11-24tipc: fix error handling of expanding buffer headroomYing Xue
Coverity says: *** CID 1338065: Error handling issues (CHECKED_RETURN) /net/tipc/udp_media.c: 162 in tipc_udp_send_msg() 156 struct udp_media_addr *dst = (struct udp_media_addr *)&dest->value; 157 struct udp_media_addr *src = (struct udp_media_addr *)&b->addr.value; 158 struct sk_buff *clone; 159 struct rtable *rt; 160 161 if (skb_headroom(skb) < UDP_MIN_HEADROOM) >>> CID 1338065: Error handling issues (CHECKED_RETURN) >>> Calling "pskb_expand_head" without checking return value (as is done elsewhere 51 out of 56 times). 162 pskb_expand_head(skb, UDP_MIN_HEADROOM, 0, GFP_ATOMIC); 163 164 clone = skb_clone(skb, GFP_ATOMIC); 165 skb_set_inner_protocol(clone, htons(ETH_P_TIPC)); 166 ub = rcu_dereference_rtnl(b->media_ptr); 167 if (!ub) { When expanding buffer headroom over udp tunnel with pskb_expand_head(), it's unfortunate that we don't check its return value. As a result, if the function returns an error code due to the lack of memory, it may cause unpredictable consequence as we unconditionally consider that it's always successful. Fixes: e53567948f82 ("tipc: conditionally expand buffer headroom over udp tunnel") Reported-by: <scan-admin@coverity.com> Cc: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-23tipc: avoid packets leaking on socket receive queueYing Xue
Even if we drain receive queue thoroughly in tipc_release() after tipc socket is removed from rhashtable, it is possible that some packets are in flight because some CPU runs receiver and did rhashtable lookup before we removed socket. They will achieve receive queue, but nobody delete them at all. To avoid this leak, we register a private socket destructor to purge receive queue, meaning releasing packets pending on receive queue will be delayed until the last reference of tipc socket will be released. Signed-off-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-20tipc: correct settings of broadcast link stateJon Paul Maloy
Since commit 5266698661401afc5e ("tipc: let broadcast packet reception use new link receive function") the broadcast send link state was meant to always be set to LINK_ESTABLISHED, since we don't need this link to follow the regular link FSM rules. It was also the intention that this state anyway shouldn't impact the run-time working state of the link, since the latter in reality is controlled by the number of registered peers. We have now discovered that this assumption is not quite correct. If the broadcast link is reset because of too many retransmissions, its state will inadvertently go to LINK_RESETTING, and never go back to LINK_ESTABLISHED, because the LINK_FAILURE event was not anticipated. This will work well once, but if it happens a second time, the reset on a link in LINK_RESETTING has has no effect, and neither the broadcast link nor the unicast links will go down as they should. Furthermore, it is confusing that the management tool shows that this link is in UP state when that obviously isn't the case. We now ensure that this state strictly follows the true working state of the link. The state is set to LINK_ESTABLISHED when the number of peers is non-zero, and to LINK_RESET otherwise. Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Minor overlapping changes in net/ipv4/ipmr.c, in 'net' we were fixing the "BH-ness" of the counter bumps whilst in 'net-next' the functions were modified to take an explicit 'net' parameter. Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-01tipc: linearize arriving NAME_DISTR and LINK_PROTO buffersJon Paul Maloy
Testing of the new UDP bearer has revealed that reception of NAME_DISTRIBUTOR, LINK_PROTOCOL/RESET and LINK_PROTOCOL/ACTIVATE message buffers is not prepared for the case that those may be non-linear. We now linearize all such buffers before they are delivered up to the generic reception layer. In order for the commit to apply cleanly to 'net' and 'stable', we do the change in the function tipc_udp_recv() for now. Later, we will post a commit to 'net-next' moving the linearization to generic code, in tipc_named_rcv() and tipc_link_proto_rcv(). Fixes: commit d0f91938bede ("tipc: add ip/udp media type") Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-25tipc: link_is_bc_sndlink() can be staticWu Fengguang
TO: "David S. Miller" <davem@davemloft.net> CC: netdev@vger.kernel.org CC: Jon Maloy <jon.maloy@ericsson.com> CC: Ying Xue <ying.xue@windriver.com> CC: tipc-discussion@lists.sourceforge.net CC: linux-kernel@vger.kernel.org Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-24tipc: clean up unused code and structuresJon Paul Maloy
After the previous changes in this series, we can now remove some unused code and structures, both in the broadcast, link aggregation and link code. There are no functional changes in this commit. Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-24tipc: ensure binding table initial distribution is sent via first linkJon Paul Maloy
Correct synchronization of the broadcast link at first contact between two nodes is dependent on the assumption that the binding table "bulk" update passes via the same link as the initial broadcast syncronization message, i.e., via the first link that is established. This is not guaranteed in the current implementation. If two link come up very close to each other in time, the "bulk" may quite well pass via the second link, and hence void the guarantee of a correct initial synchronization before the broadcast link is opened. This commit makes two small changes to strengthen this guarantee. 1) We let the second established link occupy slot 1 of the "active_links" array, while the first link will retain slot 0. (This is in reality a cosmetic change, we could just as well keep the current, opposite order) 2) We let the name distributor always use link selector/slot 0 when it sends it binding table updates. The extra traffic bias on the first link caused by this change should be negligible, since binding table updates constitutes a very small fraction of the total traffic. Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-24tipc: eliminate link's reference to owner nodeJon Paul Maloy
With the recent commit series, we have established a one-way dependency between the link aggregation (struct tipc_node) instances and their pertaining tipc_link instances. This has enabled quite significant code and structure simplifications. In this commit, we eliminate the field 'owner', which points to an instance of struct tipc_node, from struct tipc_link, and replace it with a pointer to struct net, which is the only external reference now needed by a link instance. Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-24tipc: eliminate redundant buffer cloning at transmissionJon Paul Maloy
Since all packet transmitters (link, bcast, discovery) are now sending consumable buffer clones to the bearer layer, we can remove the redundant buffer cloning that is perfomed in the lower level functions tipc_l2_send_msg() and tipc_udp_send_msg(). Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-24tipc: let neighbor discoverer tranmsit consumable buffersJon Paul Maloy
The neighbor discovery function currently uses the function tipc_bearer_send() for transmitting packets, assuming that the sent buffers are not consumed by the called function. We want to change this, in order to avoid unnecessary buffer cloning elswhere in the code. This commit introduces a new function tipc_bearer_skb() which consumes the sent buffers, and let the discoverer functions use this new call instead. The discoverer does now itself perform the cloning when that is necessary. Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-24tipc: introduce jumbo frame support for broadcastJon Paul Maloy
Until now, we have only been supporting a fix MTU size of 1500 bytes for all broadcast media, irrespective of their actual capability. We now make the broadcast MTU adaptable to the carrying media, i.e., we use the smallest MTU supported by any of the interfaces attached to TIPC. Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-24tipc: simplify bearer level broadcastJon Paul Maloy
Until now, we have been keeping track of the exact set of broadcast destinations though the help structure tipc_node_map. This leads us to have to maintain a whole infrastructure for supporting this, including a pseudo-bearer and a number of functions to manipulate both the bearers and the node map correctly. Apart from the complexity, this approach is also limiting, as struct tipc_node_map only can support cluster local broadcast if we want to avoid it becoming excessively large. We want to eliminate this limitation, in order to enable introduction of scoped multicast in the future. A closer analysis reveals that it is unnecessary maintaining this "full set" overview; it is sufficient to keep a counter per bearer, indicating how many nodes can be reached via this bearer at the moment. The protocol is now robust enough to handle transitional discrepancies between the nominal number of reachable destinations, as expected by the broadcast protocol itself, and the number which is actually reachable at the moment. The initial broadcast synchronization, in conjunction with the retransmission mechanism, ensures that all packets will eventually be acknowledged by the correct set of destinations. This commit introduces these changes. Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-24tipc: let broadcast packet reception use new link receive functionJon Paul Maloy
The code path for receiving broadcast packets is currently distinct from the unicast path. This leads to unnecessary code and data duplication, something that can be avoided with some effort. We now introduce separate per-peer tipc_link instances for handling broadcast packet reception. Each receive link keeps a pointer to the common, single, broadcast link instance, and can hence handle release and retransmission of send buffers as if they belonged to the own instance. Furthermore, we let each unicast link instance keep a reference to both the pertaining broadcast receive link, and to the common send link. This makes it possible for the unicast links to easily access data for broadcast link synchronization, as well as for carrying acknowledges for received broadcast packets. Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-24tipc: introduce capability bit for broadcast synchronizationJon Paul Maloy
Until now, we have tried to support both the newer, dedicated broadcast synchronization mechanism along with the older, less safe, RESET_MSG/ ACTIVATE_MSG based one. The latter method has turned out to be a hazard in a highly dynamic cluster, so we find it safer to disable it completely when we find that the former mechanism is supported by the peer node. For this purpose, we now introduce a new capabability bit, TIPC_BCAST_SYNCH, to inform any peer nodes that dedicated broadcast syncronization is supported by the present node. The new bit is conveyed between peers in the 'capabilities' field of neighbor discovery messages. Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-24tipc: let broadcast transmission use new link transmit functionJon Paul Maloy
This commit simplifies the broadcast link transmission function, by leveraging previous changes to the link transmission function and the broadcast transmission link life cycle. Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-24tipc: make struct tipc_link generic to support broadcastJon Paul Maloy
Realizing that unicast is just a special case of broadcast, we also see that we can go in the other direction, i.e., that modest changes to the current unicast link can make it generic enough to support broadcast. The following changes are introduced here: - A new counter ("ackers") in struct tipc_link, to indicate how many peers need to ack a packet before it can be released. - A corresponding counter in the skb user area, to keep track of how many peers a are left to ack before a buffer can be released. - A new counter ("acked"), to keep persistent track of how far a peer has acked at the moment, i.e., where in the transmission queue to start updating buffers when the next ack arrives. This is to avoid double acknowledgements from a peer, with inadvertent relase of packets as a result. - A more generic tipc_link_retrans() function, where retransmit starts from a given sequence number, instead of the first packet in the transmision queue. This is to minimize the number of retransmitted packets on the broadcast media. When the new functionality is taken into use in the next commits, we expect it to have minimal effect on unicast mode performance. Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-24tipc: use explicit allocation of broadcast send linkJon Paul Maloy
The broadcast link instance (struct tipc_link) used for sending is currently aggregated into struct tipc_bclink. This means that we cannot use the regular tipc_link_create() function for initiating the link, but do instead have to initiate numerous fields directly from the bcast_init() function. We want to reduce dependencies between the broadcast functionality and the inner workings of tipc_link. In this commit, we introduce a new function tipc_bclink_create() to link.c, and allocate the instance of the link separately using this function. Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-24tipc: make link implementation independent from struct tipc_bearerJon Paul Maloy
In reality, the link implementation is already independent from struct tipc_bearer, in that it doesn't store any reference to it. However, we still pass on a pointer to a bearer instance in the function tipc_link_create(), just to have it extract some initialization information from it. I later commits, we need to create instances of tipc_link without having any associated struct tipc_bearer. To facilitate this, we want to extract the initialization data already in the creator function in node.c, before calling tipc_link_create(), and pass this info on as individual parameters in the call. This commit introduces this change. Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-24tipc: create broadcast transmission link at namespace initJon Paul Maloy
The broadcast transmission link is currently instantiated when the network subsystem is started, i.e., on order from user space via netlink. This forces the broadcast transmission code to do unnecessary tests for the existence of the transmission link, as well in single mode node as in network mode. In this commit, we do instead create the link during initialization of the name space, and remove it when it is stopped. The fact that the transmission link now has a guaranteed longer life cycle than any of its potential clients paves the way for further code simplifcations and optimizations. Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-24tipc: move broadcast link lock to struct tipc_netJon Paul Maloy
The broadcast lock will need to be acquired outside bcast.c in a later commit. For this reason, we move the lock to struct tipc_net. Consistent with the changes in the previous commit, we also introducee two new functions tipc_bcast_lock() and tipc_bcast_unlock(). The code that is currently using tipc_bclink_lock()/unlock() will be phased out during the coming commits in this series. Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-24tipc: move bcast definitions to bcast.cJon Paul Maloy
Currently, a number of structure and function definitions related to the broadcast functionality are unnecessarily exposed in the file bcast.h. This obscures the fact that the external interface towards the broadcast link in fact is very narrow, and causes unnecessary recompilations of other files when anything changes in those definitions. In this commit, we move as many of those definitions as is currently possible to the file bcast.c. We also rename the structure 'tipc_bclink' to 'tipc_bc_base', both since the name does not correctly describe the contents of this struct, and will do so even less in the future, and because we want to use the term 'link' more appropriately in the functionality introduced later in this series. Finally, we rename a couple of functions, such as tipc_bclink_xmit() and others that will be kept in the future, to include the term 'bcast' instead. There are no functional changes in this commit. Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: net/ipv6/xfrm6_output.c net/openvswitch/flow_netlink.c net/openvswitch/vport-gre.c net/openvswitch/vport-vxlan.c net/openvswitch/vport.c net/openvswitch/vport.h The openvswitch conflicts were overlapping changes. One was the egress tunnel info fix in 'net' and the other was the vport ->send() op simplification in 'net-next'. The xfrm6_output.c conflicts was also a simplification overlapping a bug fix. Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-21tipc: conditionally expand buffer headroom over udp tunnelJon Paul Maloy
In commit d999297c3dbbe ("tipc: reduce locking scope during packet reception") we altered the packet retransmission function. Since then, when restransmitting packets, we create a clone of the original buffer using __pskb_copy(skb, MIN_H_SIZE), where MIN_H_SIZE is the size of the area we want to have copied, but also the smallest possible TIPC packet size. The value of MIN_H_SIZE is 24. Unfortunately, __pskb_copy() also has the effect that the headroom of the cloned buffer takes the size MIN_H_SIZE. This is too small for carrying the packet over the UDP tunnel bearer, which requires a minimum headroom of 28 bytes. A change to just use pskb_copy() lets the clone inherit the original headroom of 80 bytes, but also assumes that the copied data area is of at least that size, something that is not always the case. So that is not a viable solution. We now fix this by adding a check for sufficient headroom in the transmit function of udp_media.c, and expanding it when necessary. Fixes: commit d999297c3dbbe ("tipc: reduce locking scope during packet reception") Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-21tipc: allow non-linear first fragment bufferJon Paul Maloy
The current code for message reassembly is erroneously assuming that the the first arriving fragment buffer always is linear, and then goes ahead resetting the fragment list of that buffer in anticipation of more arriving fragments. However, if the buffer already happens to be non-linear, we will inadvertently drop the already attached fragment list, and later on trig a BUG() in __pskb_pull_tail(). We see this happen when running fragmented TIPC multicast across UDP, something made possible since commit d0f91938bede ("tipc: add ip/udp media type") We fix this by not resetting the fragment list when the buffer is non- linear, and by initiatlizing our private fragment list tail pointer to the tail of the existing fragment list. Fixes: commit d0f91938bede ("tipc: add ip/udp media type") Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-21tipc: extend broadcast link window sizeJon Paul Maloy
The default fix broadcast window size is currently set to 20 packets. This is a very low value, set at a time when we were still testing on 10 Mb/s hubs, and a change to it is long overdue. Commit 7845989cb4b3da1db ("net: tipc: fix stall during bclink wakeup procedure") revealed a problem with this low value. For messages of importance LOW, the backlog queue limit will be calculated to 30 packets, while a single, maximum sized message of 66000 bytes, carried across a 1500 MTU network consists of 46 packets. This leads to the following scenario (among others leading to the same situation): 1: Msg 1 of 46 packets is sent. 20 packets go to the transmit queue, 26 packets to the backlog queue. 2: Msg 2 of 46 packets is attempted sent, but rejected because there is no more space in the backlog queue at this level. The sender is added to the wakeup queue with a "pending packets chain size" number of 46. 3: Some packets in the transmit queue are acked and released. We try to wake up the sender, but the pending size of 46 is bigger than the LOW wakeup limit of 30, so this doesn't happen. 5: Subsequent acks releases all the remaining buffers. Each time we test for the wakeup criteria and find that 46 still is larger than 30, even after both the transmit and the backlog queues are empty. 6: The sender is never woken up and given a chance to send its message. He is stuck. We could now loosen the wakeup criteria (used by link_prepare_wakeup()) to become equal to the send criteria (used by tipc_link_xmit()), i.e., by ignoring the "pending packets chain size" value altogether, or we can just increase the queue limits so that the criteria can be satisfied anyway. There are good reasons (potentially multiple waiting senders) to not opt for the former solution, so we choose the latter one. This commit fixes the problem by giving the broadcast link window a default value of 50 packets. We also introduce a new minimum link window size BCLINK_MIN_WIN of 32, which is enough to always avoid the described situation. Finally, in order to not break any existing users which may set the window explicitly, we enforce that the window is set to the new minimum value in case the user is trying to set it to anything lower. Fixes: 7845989cb4b3da1db ("net: tipc: fix stall during bclink wakeup procedure") Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: drivers/net/usb/asix_common.c net/ipv4/inet_connection_sock.c net/switchdev/switchdev.c In the inet_connection_sock.c case the request socket hashing scheme is completely different in net-next. The other two conflicts were overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-15tipc: update node FSM when peer RESET message is receivedJon Paul Maloy
The change made in the previous commit revealed a small flaw in the way the node FSM is updated. When the function tipc_node_link_down() is called for the last link to a node, we should check whether this was caused by a local reset or by a received RESET message from the peer. In the latter case, we can directly issue a PEER_LOST_CONTACT_EVT to the node FSM, so that it is ready to re-establish contact. If this is not done, the peer node will sometimes have to go through a second establish cycle before the link becomes stable. We fix this in this commit by conditionally issuing the mentioned event in the function tipc_node_link_down(). We also move LINK_RESET FSM even away from the link_reset() function and into the caller function, partially because it is easier to follow the code when state changes are gathered at a limited number of locations, partially because there will be cases in future commits where we don't want the link to go RESET mode when link_reset() is called. Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Acked-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-15tipc: send out RESET immediately when link goes downJon Paul Maloy
When a link is taken down because of a node local event, such as disabling of a bearer or an interface, we currently leave it to the peer node to discover the broken communication. The default time for such failure discovery is 1.5-2 seconds. If we instead allow the terminating link endpoint to send out a RESET message at the moment it is reset, we can achieve the impression that both endpoints are going down instantly. Since this is a very common scenario, we find it worthwhile to make this small modification. Apart from letting the link produce the said message, we also have to ensure that the interface is able to transmit it before TIPC is detached. We do this by performing the disabling of a bearer in three steps: 1) Disable reception of TIPC packets from the interface in question. 2) Take down the links, while allowing them so send out a RESET message. 3) Disable transmission of TIPC packets on the interface. Apart from this, we now have to react on the NETDEV_GOING_DOWN event, instead of as currently the NEDEV_DOWN event, to ensure that such transmission is possible during the teardown phase. Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Acked-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-15tipc: delay ESTABLISH state event when link is establishedJon Paul Maloy
Link establishing, just like link teardown, is a non-atomic action, in the sense that discovering that conditions are right to establish a link, and the actual adding of the link to one of the node's send slots is done in two different lock contexts. The link FSM is designed to help bridging the gap between the two contexts in a safe manner. We have now discovered a weakness in the implementaton of this FSM. Because we directly let the link go from state LINK_ESTABLISHING to state LINK_ESTABLISHED already in the first lock context, we are unable to distinguish between a fully established link, i.e., a link that has been added to its slot, and a link that has not yet reached the second lock context. It may hence happen that a manual intervention, e.g., when disabling an interface, causes the function tipc_node_link_down() to try removing the link from the node slots, decrementing its active link counter etc, although the link was never added there in the first place. We solve this by delaying the actual state change until we reach the second lock context, inside the function tipc_node_link_up(). This makes it possible for potentail callers of __tipc_node_link_down() to know if they should proceed or not, and the problem is solved. Unforunately, the situation described above also has a second problem. Since there by necessity is a tipc_node_link_up() call pending once the node lock has been released, we must defuse that call by setting the link back from LINK_ESTABLISHING to LINK_RESET state. This forces us to make a slight modification to the link FSM, which will now look as follows. +------------------------------------+ |RESET_EVT | | | | +--------------+ | +-----------------| SYNCHING |-----------------+ | |FAILURE_EVT +--------------+ PEER_RESET_EVT| | | A | | | | | | | | | | | | | | |SYNCH_ |SYNCH_ | | | |BEGIN_EVT |END_EVT | | | | | | | V | V V | +-------------+ +--------------+ +------------+ | | RESETTING |<---------| ESTABLISHED |--------->| PEER_RESET | | +-------------+ FAILURE_ +--------------+ PEER_ +------------+ | | EVT | A RESET_EVT | | | | | | | | +----------------+ | | | RESET_EVT| |RESET_EVT | | | | | | | | | | |ESTABLISH_EVT | | | | +-------------+ | | | | | | RESET_EVT | | | | | | | | | | | V V V | | | | +-------------+ +--------------+ RESET_EVT| +--->| RESET |--------->| ESTABLISHING |<----------------+ +-------------+ PEER_ +--------------+ | A RESET_EVT | | | | | | | |FAILOVER_ |FAILOVER_ |FAILOVER_ |BEGIN_EVT |END_EVT |BEGIN_EVT | | | V | | +-------------+ | | FAILINGOVER |<----------------+ +-------------+ Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Acked-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.0.4) at 2024-06-26 21:45:57 +0000