summaryrefslogtreecommitdiff
path: root/net
AgeCommit message (Collapse)Author
2016-09-07mac80211: fix purging multicast PS buffer queueFelix Fietkau
commit 6b07d9ca9b5363dda959b9582a3fc9c0b89ef3b5 upstream. The code currently assumes that buffered multicast PS frames don't have a pending ACK frame for tx status reporting. However, hostapd sends a broadcast deauth frame on teardown for which tx status is requested. This can lead to the "Have pending ack frames" warning on module reload. Fix this by using ieee80211_free_txskb/ieee80211_purge_tx_queue. Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-07SUNRPC: allow for upcalls for same uid but different gss serviceOlga Kornievskaia
commit 9130b8dbc6ac20f2dc5846e1647f5b60eafab6e3 upstream. It's possible to have simultaneous upcalls for the same UIDs but different GSS service. In that case, we need to allow for the upcall to gssd to proceed so that not the same context is used by two different GSS services. Some servers lock the use of context to the GSS service. Signed-off-by: Olga Kornievskaia <kolga@netapp.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-07SUNRPC: Handle EADDRNOTAVAIL on connection failuresTrond Myklebust
commit 1f4c17a03ba7f430d63dba8c8e08ff1e2712581d upstream. If the connect attempt immediately fails with an EADDRNOTAVAIL error, then that means our choice of source port number was bad. This error is expected when we set the SO_REUSEPORT socket option and we have 2 sockets sharing the same source and destination address and port combinations. Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com> Fixes: 402e23b4ed9ed ("SUNRPC: Fix stupid typo in xs_sock_set_reuseport") Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-20netlabel: add address family checks to netlbl_{sock,req}_delattr()Paul Moore
commit 0e0e36774081534783aa8eeb9f6fbddf98d3c061 upstream. It seems risky to always rely on the caller to ensure the socket's address family is correct before passing it to the NetLabel kAPI, especially since we see at least one LSM which didn't. Add address family checks to the *_delattr() functions to help prevent future problems. Reported-by: Maninder Singh <maninder1.s@samsung.com> Signed-off-by: Paul Moore <paul@paul-moore.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-20Bluetooth: Fix l2cap_sock_setsockopt() with optname BT_RCVMTUAmadeusz Sławiński
commit 23bc6ab0a0912146fd674a0becc758c3162baabc upstream. When we retrieve imtu value from userspace we should use 16 bit pointer cast instead of 32 as it's defined that way in headers. Fixes setsockopt calls on big-endian platforms. Signed-off-by: Amadeusz Sławiński <amadeusz.slawinski@tieto.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-16tcp: consider recv buf for the initial window scaleSoheil Hassas Yeganeh
[ Upstream commit f626300a3e776ccc9671b0dd94698fb3aa315966 ] tcp_select_initial_window() intends to advertise a window scaling for the maximum possible window size. To do so, it considers the maximum of net.ipv4.tcp_rmem[2] and net.core.rmem_max as the only possible upper-bounds. However, users with CAP_NET_ADMIN can use SO_RCVBUFFORCE to set the socket's receive buffer size to values larger than net.ipv4.tcp_rmem[2] and net.core.rmem_max. Thus, SO_RCVBUFFORCE is effectively ignored by tcp_select_initial_window(). To fix this, consider the maximum of net.ipv4.tcp_rmem[2], net.core.rmem_max and socket's initial buffer space. Fixes: b0573dea1fb3 ("[NET]: Introduce SO_{SND,RCV}BUFFORCE socket options") Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com> Suggested-by: Neal Cardwell <ncardwell@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-16net/irda: fix NULL pointer dereference on memory allocation failureVegard Nossum
[ Upstream commit d3e6952cfb7ba5f4bfa29d4803ba91f96ce1204d ] I ran into this: kasan: CONFIG_KASAN_INLINE enabled kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] PREEMPT SMP KASAN CPU: 2 PID: 2012 Comm: trinity-c3 Not tainted 4.7.0-rc7+ #19 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 task: ffff8800b745f2c0 ti: ffff880111740000 task.ti: ffff880111740000 RIP: 0010:[<ffffffff82bbf066>] [<ffffffff82bbf066>] irttp_connect_request+0x36/0x710 RSP: 0018:ffff880111747bb8 EFLAGS: 00010286 RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 0000000069dd8358 RDX: 0000000000000009 RSI: 0000000000000027 RDI: 0000000000000048 RBP: ffff880111747c00 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000069dd8358 R11: 1ffffffff0759723 R12: 0000000000000000 R13: ffff88011a7e4780 R14: 0000000000000027 R15: 0000000000000000 FS: 00007fc738404700(0000) GS:ffff88011af00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fc737fdfb10 CR3: 0000000118087000 CR4: 00000000000006e0 Stack: 0000000000000200 ffff880111747bd8 ffffffff810ee611 ffff880119f1f220 ffff880119f1f4f8 ffff880119f1f4f0 ffff88011a7e4780 ffff880119f1f232 ffff880119f1f220 ffff880111747d58 ffffffff82bca542 0000000000000000 Call Trace: [<ffffffff82bca542>] irda_connect+0x562/0x1190 [<ffffffff825ae582>] SYSC_connect+0x202/0x2a0 [<ffffffff825b4489>] SyS_connect+0x9/0x10 [<ffffffff8100334c>] do_syscall_64+0x19c/0x410 [<ffffffff83295ca5>] entry_SYSCALL64_slow_path+0x25/0x25 Code: 41 89 ca 48 89 e5 41 57 41 56 41 55 41 54 41 89 d7 53 48 89 fb 48 83 c7 48 48 89 fa 41 89 f6 48 c1 ea 03 48 83 ec 20 4c 8b 65 10 <0f> b6 04 02 84 c0 74 08 84 c0 0f 8e 4c 04 00 00 80 7b 48 00 74 RIP [<ffffffff82bbf066>] irttp_connect_request+0x36/0x710 RSP <ffff880111747bb8> ---[ end trace 4cda2588bc055b30 ]--- The problem is that irda_open_tsap() can fail and leave self->tsap = NULL, and then irttp_connect_request() almost immediately dereferences it. Cc: stable@vger.kernel.org Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-16ipv4: reject RTNH_F_DEAD and RTNH_F_LINKDOWN from user spaceJulian Anastasov
[ Upstream commit 80610229ef7b26615dbb6cb6e873709a60bacc9f ] Vegard Nossum is reporting for a crash in fib_dump_info when nh_dev = NULL and fib_nhs == 1: Pid: 50, comm: netlink.exe Not tainted 4.7.0-rc5+ RIP: 0033:[<00000000602b3d18>] RSP: 0000000062623890 EFLAGS: 00010202 RAX: 0000000000000000 RBX: 000000006261b800 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000024 RDI: 000000006245ba00 RBP: 00000000626238f0 R08: 000000000000029c R09: 0000000000000000 R10: 0000000062468038 R11: 000000006245ba00 R12: 000000006245ba00 R13: 00000000625f96c0 R14: 00000000601e16f0 R15: 0000000000000000 Kernel panic - not syncing: Kernel mode fault at addr 0x2e0, ip 0x602b3d18 CPU: 0 PID: 50 Comm: netlink.exe Not tainted 4.7.0-rc5+ #581 Stack: 626238f0 960226a02 00000400 000000fe 62623910 600afca7 62623970 62623a48 62468038 00000018 00000000 00000000 Call Trace: [<602b3e93>] rtmsg_fib+0xd3/0x190 [<602b6680>] fib_table_insert+0x260/0x500 [<602b0e5d>] inet_rtm_newroute+0x4d/0x60 [<60250def>] rtnetlink_rcv_msg+0x8f/0x270 [<60267079>] netlink_rcv_skb+0xc9/0xe0 [<60250d4b>] rtnetlink_rcv+0x3b/0x50 [<60265400>] netlink_unicast+0x1a0/0x2c0 [<60265e47>] netlink_sendmsg+0x3f7/0x470 [<6021dc9a>] sock_sendmsg+0x3a/0x90 [<6021e0d0>] ___sys_sendmsg+0x300/0x360 [<6021fa64>] __sys_sendmsg+0x54/0xa0 [<6021fac0>] SyS_sendmsg+0x10/0x20 [<6001ea68>] handle_syscall+0x88/0x90 [<600295fd>] userspace+0x3fd/0x500 [<6001ac55>] fork_handler+0x85/0x90 $ addr2line -e vmlinux -i 0x602b3d18 include/linux/inetdevice.h:222 net/ipv4/fib_semantics.c:1264 Problem happens when RTNH_F_LINKDOWN is provided from user space when creating routes that do not use the flag, catched with netlink fuzzer. Currently, the kernel allows user space to set both flags to nh_flags and fib_flags but this is not intentional, the assumption was that they are not set. Fix this by rejecting both flags with EINVAL. Reported-by: Vegard Nossum <vegard.nossum@oracle.com> Fixes: 0eeb075fad73 ("net: ipv4 sysctl option to ignore routes when nexthop link is down") Signed-off-by: Julian Anastasov <ja@ssi.bg> Cc: Andy Gospodarek <gospo@cumulusnetworks.com> Cc: Dinesh Dutt <ddutt@cumulusnetworks.com> Cc: Scott Feldman <sfeldma@gmail.com> Reviewed-by: Andy Gospodarek <gospo@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-16tcp: enable per-socket rate limiting of all 'challenge acks'Jason Baron
[ Upstream commit 083ae308280d13d187512b9babe3454342a7987e ] The per-socket rate limit for 'challenge acks' was introduced in the context of limiting ack loops: commit f2b2c582e824 ("tcp: mitigate ACK loops for connections as tcp_sock") And I think it can be extended to rate limit all 'challenge acks' on a per-socket basis. Since we have the global tcp_challenge_ack_limit, this patch allows for tcp_challenge_ack_limit to be set to a large value and effectively rely on the per-socket limit, or set tcp_challenge_ack_limit to a lower value and still prevents a single connections from consuming the entire challenge ack quota. It further moves in the direction of eliminating the global limit at some point, as Eric Dumazet has suggested. This a follow-up to: Subject: tcp: make challenge acks less predictable Cc: Eric Dumazet <edumazet@google.com> Cc: David S. Miller <davem@davemloft.net> Cc: Neal Cardwell <ncardwell@google.com> Cc: Yuchung Cheng <ycheng@google.com> Cc: Yue Cao <ycao009@ucr.edu> Signed-off-by: Jason Baron <jbaron@akamai.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-16tcp: make challenge acks less predictableEric Dumazet
[ Upstream commit 75ff39ccc1bd5d3c455b6822ab09e533c551f758 ] Yue Cao claims that current host rate limiting of challenge ACKS (RFC 5961) could leak enough information to allow a patient attacker to hijack TCP sessions. He will soon provide details in an academic paper. This patch increases the default limit from 100 to 1000, and adds some randomization so that the attacker can no longer hijack sessions without spending a considerable amount of probes. Based on initial analysis and patch from Linus. Note that we also have per socket rate limiting, so it is tempting to remove the host limit in the future. v2: randomize the count of challenge acks per second, not the period. Fixes: 282f23c6ee34 ("tcp: implement RFC 5961 3.2") Reported-by: Yue Cao <ycao009@ucr.edu> Signed-off-by: Eric Dumazet <edumazet@google.com> Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Yuchung Cheng <ycheng@google.com> Cc: Neal Cardwell <ncardwell@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Acked-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-10libceph: apply new_state before new_up_client on incrementalsIlya Dryomov
commit 930c532869774ebf8af9efe9484c597f896a7d46 upstream. Currently, osd_weight and osd_state fields are updated in the encoding order. This is wrong, because an incremental map may look like e.g. new_up_client: { osd=6, addr=... } # set osd_state and addr new_state: { osd=6, xorstate=EXISTS } # clear osd_state Suppose osd6's current osd_state is EXISTS (i.e. osd6 is down). After applying new_up_client, osd_state is changed to EXISTS | UP. Carrying on with the new_state update, we flip EXISTS and leave osd6 in a weird "!EXISTS but UP" state. A non-existent OSD is considered down by the mapping code 2087 for (i = 0; i < pg->pg_temp.len; i++) { 2088 if (ceph_osd_is_down(osdmap, pg->pg_temp.osds[i])) { 2089 if (ceph_can_shift_osds(pi)) 2090 continue; 2091 2092 temp->osds[temp->size++] = CRUSH_ITEM_NONE; and so requests get directed to the second OSD in the set instead of the first, resulting in OSD-side errors like: [WRN] : client.4239 192.168.122.21:0/2444980242 misdirected client.4239.1:2827 pg 2.5df899f2 to osd.4 not [1,4,6] in e680/680 and hung rbds on the client: [ 493.566367] rbd: rbd0: write 400000 at 11cc00000 (0) [ 493.566805] rbd: rbd0: result -6 xferred 400000 [ 493.567011] blk_update_request: I/O error, dev rbd0, sector 9330688 The fix is to decouple application from the decoding and: - apply new_weight first - apply new_state before new_up_client - twiddle osd_state flags if marking in - clear out some of the state if osd is destroyed Fixes: http://tracker.ceph.com/issues/14901 Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Josh Durgin <jdurgin@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-10RDS: fix rds_tcp_init() error pathVegard Nossum
commit 3dad5424adfb346c871847d467f97dcdca64ea97 upstream. If register_pernet_subsys() fails, we shouldn't try to call unregister_pernet_subsys(). Fixes: 467fa15356 ("RDS-TCP: Support multiple RDS-TCP listen endpoints, one per netns.") Cc: Sowmini Varadhan <sowmini.varadhan@oracle.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com> Acked-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-07-27af_unix: fix hard linked sockets on overlayMiklos Szeredi
commit eb0a4a47ae89aaa0674ab3180de6a162f3be2ddf upstream. Overlayfs uses separate inodes even in the case of hard links on the underlying filesystems. This is a problem for AF_UNIX socket implementation which indexes sockets based on the inode. This resulted in hard linked sockets not working. The fix is to use the real, underlying inode. Test case follows: -- ovl-sock-test.c -- #include <unistd.h> #include <err.h> #include <sys/socket.h> #include <sys/un.h> #define SOCK "test-sock" #define SOCK2 "test-sock2" int main(void) { int fd, fd2; struct sockaddr_un addr = { .sun_family = AF_UNIX, .sun_path = SOCK, }; struct sockaddr_un addr2 = { .sun_family = AF_UNIX, .sun_path = SOCK2, }; unlink(SOCK); unlink(SOCK2); if ((fd = socket(AF_UNIX, SOCK_STREAM, 0)) == -1) err(1, "socket"); if (bind(fd, (struct sockaddr *) &addr, sizeof(addr)) == -1) err(1, "bind"); if (listen(fd, 0) == -1) err(1, "listen"); if (link(SOCK, SOCK2) == -1) err(1, "link"); if ((fd2 = socket(AF_UNIX, SOCK_STREAM, 0)) == -1) err(1, "socket"); if (connect(fd2, (struct sockaddr *) &addr2, sizeof(addr2)) == -1) err (1, "connect"); return 0; } ---- Reported-by: Alexander Morozov <alexandr.morozov@docker.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-07-27ipv6: Fix mem leak in rt6i_pcpuMartin KaFai Lau
[ Upstream commit 903ce4abdf374e3365d93bcb3df56c62008835ba ] It was first reported and reproduced by Petr (thanks!) in https://bugzilla.kernel.org/show_bug.cgi?id=119581 free_percpu(rt->rt6i_pcpu) used to always happen in ip6_dst_destroy(). However, after fixing a deadlock bug in commit 9c7370a166b4 ("ipv6: Fix a potential deadlock when creating pcpu rt"), free_percpu() is not called before setting non_pcpu_rt->rt6i_pcpu to NULL. It is worth to note that rt6i_pcpu is protected by table->tb6_lock. kmemleak somehow did not report it. We nailed it down by observing the pcpu entries in /proc/vmallocinfo (first suggested by Hannes, thanks!). Signed-off-by: Martin KaFai Lau <kafai@fb.com> Fixes: 9c7370a166b4 ("ipv6: Fix a potential deadlock when creating pcpu rt") Reported-by: Petr Novopashenniy <pety@rusnet.ru> Tested-by: Petr Novopashenniy <pety@rusnet.ru> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Cc: Hannes Frederic Sowa <hannes@stressinduktion.org> Cc: Petr Novopashenniy <pety@rusnet.ru> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-07-27net_sched: fix mirrored packets checksumWANG Cong
[ Upstream commit 82a31b9231f02d9c1b7b290a46999d517b0d312a ] Similar to commit 9b368814b336 ("net: fix bridge multicast packet checksum validation") we need to fixup the checksum for CHECKSUM_COMPLETE when pushing skb on RX path. Otherwise we get similar splats. Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Tom Herbert <tom@herbertland.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-07-27packet: Use symmetric hash for PACKET_FANOUT_HASH.David S. Miller
[ Upstream commit eb70db8756717b90c01ccc765fdefc4dd969fc74 ] People who use PACKET_FANOUT_HASH want a symmetric hash, meaning that they want packets going in both directions on a flow to hash to the same bucket. The core kernel SKB hash became non-symmetric when the ipv6 flow label and other entities were incorporated into the standard flow hash order to increase entropy. But there are no users of PACKET_FANOUT_HASH who want an assymetric hash, they all want a symmetric one. Therefore, use the flow dissector to compute a flat symmetric hash over only the protocol, addresses and ports. This hash does not get installed into and override the normal skb hash, so this change has no effect whatsoever on the rest of the stack. Reported-by: Eric Leblond <eric@regit.org> Tested-by: Eric Leblond <eric@regit.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-07-27nfsd4/rpc: move backchannel create logic into rpc codeJ. Bruce Fields
commit d50039ea5ee63c589b0434baa5ecf6e5075bb6f9 upstream. Also simplify the logic a bit. Signed-off-by: J. Bruce Fields <bfields@redhat.com> Acked-by: Trond Myklebust <trondmy@primarydata.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-07-27mac80211: Fix mesh estab_plinks counting in STA removal caseJouni Malinen
commit 126e7557328a1cd576be4fca95b133a2695283ff upstream. If a user space program (e.g., wpa_supplicant) deletes a STA entry that is currently in NL80211_PLINK_ESTAB state, the number of established plinks counter was not decremented and this could result in rejecting new plink establishment before really hitting the real maximum plink limit. For !user_mpm case, this decrementation is handled by mesh_plink_deactive(). Fix this by decrementing estab_plinks on STA deletion (mesh_sta_cleanup() gets called from there) so that the counter has a correct value and the Beacon frame advertisement in Mesh Configuration element shows the proper value for capability to accept additional peers. Signed-off-by: Jouni Malinen <j@w1.fi> Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-07-27mac80211: mesh: flush mesh paths unconditionallyBob Copeland
commit fe7a7c57629e8dcbc0e297363a9b2366d67a6dc5 upstream. Currently, the mesh paths associated with a nexthop station are cleaned up in the following code path: __sta_info_destroy_part1 synchronize_net() __sta_info_destroy_part2 -> cleanup_single_sta -> mesh_sta_cleanup -> mesh_plink_deactivate -> mesh_path_flush_by_nexthop However, there are a couple of problems here: 1) the paths aren't flushed at all if the MPM is running in userspace (e.g. when using wpa_supplicant or authsae) 2) there is no synchronize_rcu between removing the path and readers accessing the nexthop, which means the following race is possible: CPU0 CPU1 ~~~~ ~~~~ sta_info_destroy_part1() synchronize_net() rcu_read_lock() mesh_nexthop_resolve() mpath = mesh_path_lookup() [...] -> mesh_path_flush_by_nexthop() sta = rcu_dereference( mpath->next_hop) kfree(sta) access sta <-- CRASH Fix both of these by unconditionally flushing paths before destroying the sta, and by adding a synchronize_net() after path flush to ensure no active readers can still dereference the sta. Fixes this crash: [ 348.529295] BUG: unable to handle kernel paging request at 00020040 [ 348.530014] IP: [<f929245d>] ieee80211_mps_set_frame_flags+0x40/0xaa [mac80211] [ 348.530014] *pde = 00000000 [ 348.530014] Oops: 0000 [#1] PREEMPT [ 348.530014] Modules linked in: drbg ansi_cprng ctr ccm ppp_generic slhc ipt_MASQUERADE nf_nat_masquerade_ipv4 8021q ] [ 348.530014] CPU: 0 PID: 20597 Comm: wget Tainted: G O 4.6.0-rc5-wt=V1 #1 [ 348.530014] Hardware name: To Be Filled By O.E.M./To be filled by O.E.M., BIOS 080016 11/07/2014 [ 348.530014] task: f64fa280 ti: f4f9c000 task.ti: f4f9c000 [ 348.530014] EIP: 0060:[<f929245d>] EFLAGS: 00010246 CPU: 0 [ 348.530014] EIP is at ieee80211_mps_set_frame_flags+0x40/0xaa [mac80211] [ 348.530014] EAX: f4ce63e0 EBX: 00000088 ECX: f3788416 EDX: 00020008 [ 348.530014] ESI: 00000000 EDI: 00000088 EBP: f6409a4c ESP: f6409a40 [ 348.530014] DS: 007b ES: 007b FS: 0000 GS: 0033 SS: 0068 [ 348.530014] CR0: 80050033 CR2: 00020040 CR3: 33190000 CR4: 00000690 [ 348.530014] Stack: [ 348.530014] 00000000 f4ce63e0 f5f9bd80 f6409a64 f9291d80 0000ce67 f5d51e00 f4ce63e0 [ 348.530014] f3788416 f6409a80 f9291dc1 f4ce8320 f4ce63e0 f5d51e00 f4ce63e0 f4ce8320 [ 348.530014] f6409a98 f9277f6f 00000000 00000000 0000007c 00000000 f6409b2c f9278dd1 [ 348.530014] Call Trace: [ 348.530014] [<f9291d80>] mesh_nexthop_lookup+0xbb/0xc8 [mac80211] [ 348.530014] [<f9291dc1>] mesh_nexthop_resolve+0x34/0xd8 [mac80211] [ 348.530014] [<f9277f6f>] ieee80211_xmit+0x92/0xc1 [mac80211] [ 348.530014] [<f9278dd1>] __ieee80211_subif_start_xmit+0x807/0x83c [mac80211] [ 348.530014] [<c04df012>] ? sch_direct_xmit+0xd7/0x1b3 [ 348.530014] [<c022a8c6>] ? __local_bh_enable_ip+0x5d/0x7b [ 348.530014] [<f956870c>] ? nf_nat_ipv4_out+0x4c/0xd0 [nf_nat_ipv4] [ 348.530014] [<f957e036>] ? iptable_nat_ipv4_fn+0xf/0xf [iptable_nat] [ 348.530014] [<c04c6f45>] ? netif_skb_features+0x14d/0x30a [ 348.530014] [<f9278e10>] ieee80211_subif_start_xmit+0xa/0xe [mac80211] [ 348.530014] [<c04c769c>] dev_hard_start_xmit+0x1f8/0x267 [ 348.530014] [<c04c7261>] ? validate_xmit_skb.isra.120.part.121+0x10/0x253 [ 348.530014] [<c04defc6>] sch_direct_xmit+0x8b/0x1b3 [ 348.530014] [<c04c7a9c>] __dev_queue_xmit+0x2c8/0x513 [ 348.530014] [<c04c7cfb>] dev_queue_xmit+0xa/0xc [ 348.530014] [<f91bfc7a>] batadv_send_skb_packet+0xd6/0xec [batman_adv] [ 348.530014] [<f91bfdc4>] batadv_send_unicast_skb+0x15/0x4a [batman_adv] [ 348.530014] [<f91b5938>] batadv_dat_send_data+0x27e/0x310 [batman_adv] [ 348.530014] [<f91c30b5>] ? batadv_tt_global_hash_find.isra.11+0x8/0xa [batman_adv] [ 348.530014] [<f91b63f3>] batadv_dat_snoop_outgoing_arp_request+0x208/0x23d [batman_adv] [ 348.530014] [<f91c0cd9>] batadv_interface_tx+0x206/0x385 [batman_adv] [ 348.530014] [<c04c769c>] dev_hard_start_xmit+0x1f8/0x267 [ 348.530014] [<c04c7261>] ? validate_xmit_skb.isra.120.part.121+0x10/0x253 [ 348.530014] [<c04defc6>] sch_direct_xmit+0x8b/0x1b3 [ 348.530014] [<c04c7a9c>] __dev_queue_xmit+0x2c8/0x513 [ 348.530014] [<f80cbd2a>] ? igb_xmit_frame+0x57/0x72 [igb] [ 348.530014] [<c04c7cfb>] dev_queue_xmit+0xa/0xc [ 348.530014] [<f843a326>] br_dev_queue_push_xmit+0xeb/0xfb [bridge] [ 348.530014] [<f843a35f>] br_forward_finish+0x29/0x74 [bridge] [ 348.530014] [<f843a23b>] ? deliver_clone+0x3b/0x3b [bridge] [ 348.530014] [<f843a714>] __br_forward+0x89/0xe7 [bridge] [ 348.530014] [<f843a336>] ? br_dev_queue_push_xmit+0xfb/0xfb [bridge] [ 348.530014] [<f843a234>] deliver_clone+0x34/0x3b [bridge] [ 348.530014] [<f843a68b>] ? br_flood+0x95/0x95 [bridge] [ 348.530014] [<f843a66d>] br_flood+0x77/0x95 [bridge] [ 348.530014] [<f843a809>] br_flood_forward+0x13/0x1a [bridge] [ 348.530014] [<f843a68b>] ? br_flood+0x95/0x95 [bridge] [ 348.530014] [<f843b877>] br_handle_frame_finish+0x392/0x3db [bridge] [ 348.530014] [<c04e9b2b>] ? nf_iterate+0x2b/0x6b [ 348.530014] [<f843baa6>] br_handle_frame+0x1e6/0x240 [bridge] [ 348.530014] [<f843b4e5>] ? br_handle_local_finish+0x6a/0x6a [bridge] [ 348.530014] [<c04c4ba0>] __netif_receive_skb_core+0x43a/0x66b [ 348.530014] [<f843b8c0>] ? br_handle_frame_finish+0x3db/0x3db [bridge] [ 348.530014] [<c023cea4>] ? resched_curr+0x19/0x37 [ 348.530014] [<c0240707>] ? check_preempt_wakeup+0xbf/0xfe [ 348.530014] [<c0255dec>] ? ktime_get_with_offset+0x5c/0xfc [ 348.530014] [<c04c4fc1>] __netif_receive_skb+0x47/0x55 [ 348.530014] [<c04c57ba>] netif_receive_skb_internal+0x40/0x5a [ 348.530014] [<c04c61ef>] napi_gro_receive+0x3a/0x94 [ 348.530014] [<f80ce8d5>] igb_poll+0x6fd/0x9ad [igb] [ 348.530014] [<c0242bd8>] ? swake_up_locked+0x14/0x26 [ 348.530014] [<c04c5d29>] net_rx_action+0xde/0x250 [ 348.530014] [<c022a743>] __do_softirq+0x8a/0x163 [ 348.530014] [<c022a6b9>] ? __hrtimer_tasklet_trampoline+0x19/0x19 [ 348.530014] [<c021100f>] do_softirq_own_stack+0x26/0x2c [ 348.530014] <IRQ> [ 348.530014] [<c022a957>] irq_exit+0x31/0x6f [ 348.530014] [<c0210eb2>] do_IRQ+0x8d/0xa0 [ 348.530014] [<c058152c>] common_interrupt+0x2c/0x40 [ 348.530014] Code: e7 8c 00 66 81 ff 88 00 75 12 85 d2 75 0e b2 c3 b8 83 e9 29 f9 e8 a7 5f f9 c6 eb 74 66 81 e3 8c 005 [ 348.530014] EIP: [<f929245d>] ieee80211_mps_set_frame_flags+0x40/0xaa [mac80211] SS:ESP 0068:f6409a40 [ 348.530014] CR2: 0000000000020040 [ 348.530014] ---[ end trace 48556ac26779732e ]--- [ 348.530014] Kernel panic - not syncing: Fatal exception in interrupt [ 348.530014] Kernel Offset: disabled Reported-by: Fred Veldini <fred.veldini@gmail.com> Tested-by: Fred Veldini <fred.veldini@gmail.com> Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-07-27mac80211: fix fast_tx header alignmentFelix Fietkau
commit 6fe04128f158c5ad27e7504bfdf1b12e63331bc9 upstream. The header field is defined as u8[] but also accessed as struct ieee80211_hdr. Enforce an alignment of 2 to prevent unnecessary unaligned accesses, which can be very harmful for performance on many platforms. Fixes: e495c24731a2 ("mac80211: extend fast-xmit for more ciphers") Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-07-11AX.25: Close socket connection on session completionBasil Gunn
[ Upstream commit 4a7d99ea1b27734558feb6833f180cd38a159940 ] A socket connection made in ax.25 is not closed when session is completed. The heartbeat timer is stopped prematurely and this is where the socket gets closed. Allow heatbeat timer to run to close socket. Symptom occurs in kernels >= 4.2.0 Originally sent 6/15/2016. Resend with distribution list matching scripts/maintainer.pl output. Signed-off-by: Basil Gunn <basil@pacabunga.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-07-11bpf: try harder on clones when writing into skbDaniel Borkmann
[ Upstream commit 3697649ff29e0f647565eed04b27a7779c646a22 ] When we're dealing with clones and the area is not writeable, try harder and get a copy via pskb_expand_head(). Replace also other occurences in tc actions with the new skb_try_make_writable(). Reported-by: Ashhad Sheikh <ashhadsheikh394@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-07-11neigh: Explicitly declare RCU-bh read side critical section in neigh_xmit()David Barroso
[ Upstream commit b560f03ddfb072bca65e9440ff0dc4f9b1d1f056 ] neigh_xmit() expects to be called inside an RCU-bh read side critical section, and while one of its two current callers gets this right, the other one doesn't. More specifically, neigh_xmit() has two callers, mpls_forward() and mpls_output(), and while both callers call neigh_xmit() under rcu_read_lock(), this provides sufficient protection for neigh_xmit() only in the case of mpls_forward(), as that is always called from softirq context and therefore doesn't need explicit BH protection, while mpls_output() can be called from process context with softirqs enabled. When mpls_output() is called from process context, with softirqs enabled, we can be preempted by a softirq at any time, and RCU-bh considers the completion of a softirq as signaling the end of any pending read-side critical sections, so if we do get a softirq while we are in the part of neigh_xmit() that expects to be run inside an RCU-bh read side critical section, we can end up with an unexpected RCU grace period running right in the middle of that critical section, making things go boom. This patch fixes this impedance mismatch in the callee, by making neigh_xmit() always take rcu_read_{,un}lock_bh() around the code that expects to be treated as an RCU-bh read side critical section, as this seems a safer option than fixing it in the callers. Fixes: 4fd3d7d9e868f ("neigh: Add helper function neigh_xmit") Signed-off-by: David Barroso <dbarroso@fastly.com> Signed-off-by: Lennert Buytenhek <lbuytenhek@fastly.com> Acked-by: David Ahern <dsa@cumulusnetworks.com> Acked-by: Robert Shearman <rshearma@brocade.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-07-11Bridge: Fix ipv6 mc snooping if bridge has no ipv6 addressdaniel
[ Upstream commit 0888d5f3c0f183ea6177355752ada433d370ac89 ] The bridge is falsly dropping ipv6 mulitcast packets if there is: 1. No ipv6 address assigned on the brigde. 2. No external mld querier present. 3. The internal querier enabled. When the bridge fails to build mld queries, because it has no ipv6 address, it slilently returns, but keeps the local querier enabled. This specific case causes confusing packet loss. Ipv6 multicast snooping can only work if: a) An external querier is present OR b) The bridge has an ipv6 address an is capable of sending own queries Otherwise it has to forward/flood the ipv6 multicast traffic, because snooping cannot work. This patch fixes the issue by adding a flag to the bridge struct that indicates that there is currently no ipv6 address assinged to the bridge and returns a false state for the local querier in __br_multicast_querier_exists(). Special thanks to Linus Lüssing. Fixes: d1d81d4c3dd8 ("bridge: check return value of ipv6_dev_get_saddr()") Signed-off-by: Daniel Danzberger <daniel@dd-wrt.com> Acked-by: Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-07-11ipmr/ip6mr: Initialize the last assert time of mfc entries.Tom Goff
[ Upstream commit 70a0dec45174c976c64b4c8c1d0898581f759948 ] This fixes wrong-interface signaling on 32-bit platforms for entries created when jiffies > 2^31 + MFC_ASSERT_THRESH. Signed-off-by: Tom Goff <thomas.goff@ll.mit.edu> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-07-11netem: fix a use after freeEric Dumazet
[ Upstream commit 21de12ee5568fd1aec47890c72967abf791ac80a ] If the packet was dropped by lower qdisc, then we must not access it later. Save qdisc_pkt_len(skb) in a temp variable. Fixes: 2ccccf5fb43f ("net_sched: update hierarchical backlog too") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: WANG Cong <xiyou.wangcong@gmail.com> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-07-11esp: Fix ESN generation under UDP encapsulationHerbert Xu
[ Upstream commit 962fcef33b03395051367181a0549d29d109d9a4 ] Blair Steven noticed that ESN in conjunction with UDP encapsulation is broken because we set the temporary ESP header to the wrong spot. This patch fixes this by first of all using the right spot, i.e., 4 bytes off the real ESP header, and then saving this information so that after encryption we can restore it properly. Fixes: 7021b2e1cddd ("esp4: Switch to new AEAD interface") Reported-by: Blair Steven <Blair.Steven@alliedtelesis.co.nz> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Acked-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-07-11sit: correct IP protocol used in ipip6_errSimon Horman
[ Upstream commit d5d8760b78d0cfafe292f965f599988138b06a70 ] Since 32b8a8e59c9c ("sit: add IPv4 over IPv4 support") ipip6_err() may be called for packets whose IP protocol is IPPROTO_IPIP as well as those whose IP protocol is IPPROTO_IPV6. In the case of IPPROTO_IPIP packets the correct protocol value is not passed to ipv4_update_pmtu() or ipv4_redirect(). This patch resolves this problem by using the IP protocol of the packet rather than a hard-coded value. This appears to be consistent with the usage of the protocol of a packet by icmp_socket_deliver() the caller of ipip6_err(). I was able to exercise the redirect case by using a setup where an ICMP redirect was received for the destination of the encapsulated packet. However, it appears that although incorrect the protocol field is not used in this case and thus no problem manifests. On inspection it does not appear that a problem will manifest in the fragmentation needed/update pmtu case either. In short I believe this is a cosmetic fix. None the less, the use of IPPROTO_IPV6 seems wrong and confusing. Reviewed-by: Dinan Gunawardena <dinan.gunawardena@netronome.com> Signed-off-by: Simon Horman <simon.horman@netronome.com> Acked-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-07-11net_sched: fix pfifo_head_drop behavior vs backlogEric Dumazet
[ Upstream commit 6c0d54f1897d229748d4f41ef919078db6db2123 ] When the qdisc is full, we drop a packet at the head of the queue, queue the current skb and return NET_XMIT_CN Now we track backlog on upper qdiscs, we need to call qdisc_tree_reduce_backlog(), even if the qlen did not change. Fixes: 2ccccf5fb43f ("net_sched: update hierarchical backlog too") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: WANG Cong <xiyou.wangcong@gmail.com> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Acked-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-24netfilter: x_tables: introduce and use xt_copy_counters_from_userFlorian Westphal
commit d7591f0c41ce3e67600a982bab6989ef0f07b3ce upstream. The three variants use same copy&pasted code, condense this into a helper and use that. Make sure info.name is 0-terminated. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-24netfilter: x_tables: do compat validation via translate_tableFlorian Westphal
commit 09d9686047dbbe1cf4faa558d3ecc4aae2046054 upstream. This looks like refactoring, but its also a bug fix. Problem is that the compat path (32bit iptables, 64bit kernel) lacks a few sanity tests that are done in the normal path. For example, we do not check for underflows and the base chain policies. While its possible to also add such checks to the compat path, its more copy&pastry, for instance we cannot reuse check_underflow() helper as e->target_offset differs in the compat case. Other problem is that it makes auditing for validation errors harder; two places need to be checked and kept in sync. At a high level 32 bit compat works like this: 1- initial pass over blob: validate match/entry offsets, bounds checking lookup all matches and targets do bookkeeping wrt. size delta of 32/64bit structures assign match/target.u.kernel pointer (points at kernel implementation, needed to access ->compatsize etc.) 2- allocate memory according to the total bookkeeping size to contain the translated ruleset 3- second pass over original blob: for each entry, copy the 32bit representation to the newly allocated memory. This also does any special match translations (e.g. adjust 32bit to 64bit longs, etc). 4- check if ruleset is free of loops (chase all jumps) 5-first pass over translated blob: call the checkentry function of all matches and targets. The alternative implemented by this patch is to drop steps 3&4 from the compat process, the translation is changed into an intermediate step rather than a full 1:1 translate_table replacement. In the 2nd pass (step #3), change the 64bit ruleset back to a kernel representation, i.e. put() the kernel pointer and restore ->u.user.name . This gets us a 64bit ruleset that is in the format generated by a 64bit iptables userspace -- we can then use translate_table() to get the 'native' sanity checks. This has two drawbacks: 1. we re-validate all the match and target entry structure sizes even though compat translation is supposed to never generate bogus offsets. 2. we put and then re-lookup each match and target. THe upside is that we get all sanity tests and ruleset validations provided by the normal path and can remove some duplicated compat code. iptables-restore time of autogenerated ruleset with 300k chains of form -A CHAIN0001 -m limit --limit 1/s -j CHAIN0002 -A CHAIN0002 -m limit --limit 1/s -j CHAIN0003 shows no noticeable differences in restore times: old: 0m30.796s new: 0m31.521s 64bit: 0m25.674s Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-24netfilter: x_tables: xt_compat_match_from_user doesn't need a retvalFlorian Westphal
commit 0188346f21e6546498c2a0f84888797ad4063fc5 upstream. Always returned 0. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-24netfilter: ip6_tables: simplify translate_compat_table argsFlorian Westphal
commit 329a0807124f12fe1c8032f95d8a8eb47047fb0e upstream. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-24netfilter: ip_tables: simplify translate_compat_table argsFlorian Westphal
commit 7d3f843eed29222254c9feab481f55175a1afcc9 upstream. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-24netfilter: arp_tables: simplify translate_compat_table argsFlorian Westphal
commit 8dddd32756f6fe8e4e82a63361119b7e2384e02f upstream. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-24netfilter: x_tables: don't reject valid target size on some architecturesFlorian Westphal
commit 7b7eba0f3515fca3296b8881d583f7c1042f5226 upstream. Quoting John Stultz: In updating a 32bit arm device from 4.6 to Linus' current HEAD, I noticed I was having some trouble with networking, and realized that /proc/net/ip_tables_names was suddenly empty. Digging through the registration process, it seems we're catching on the: if (strcmp(t->u.user.name, XT_STANDARD_TARGET) == 0 && target_offset + sizeof(struct xt_standard_target) != next_offset) return -EINVAL; Where next_offset seems to be 4 bytes larger then the offset + standard_target struct size. next_offset needs to be aligned via XT_ALIGN (so we can access all members of ip(6)t_entry struct). This problem didn't show up on i686 as it only needs 4-byte alignment for u64, but iptables userspace on other 32bit arches does insert extra padding. Reported-by: John Stultz <john.stultz@linaro.org> Tested-by: John Stultz <john.stultz@linaro.org> Fixes: 7ed2abddd20cf ("netfilter: x_tables: check standard target size too") Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-24netfilter: x_tables: validate all offsets and sizes in a ruleFlorian Westphal
commit 13631bfc604161a9d69cd68991dff8603edd66f9 upstream. Validate that all matches (if any) add up to the beginning of the target and that each match covers at least the base structure size. The compat path should be able to safely re-use the function as the structures only differ in alignment; added a BUILD_BUG_ON just in case we have an arch that adds padding as well. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-24netfilter: x_tables: check for bogus target offsetFlorian Westphal
commit ce683e5f9d045e5d67d1312a42b359cb2ab2a13c upstream. We're currently asserting that targetoff + targetsize <= nextoff. Extend it to also check that targetoff is >= sizeof(xt_entry). Since this is generic code, add an argument pointing to the start of the match/target, we can then derive the base structure size from the delta. We also need the e->elems pointer in a followup change to validate matches. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-24netfilter: x_tables: check standard target size tooFlorian Westphal
commit 7ed2abddd20cf8f6bd27f65bd218f26fa5bf7f44 upstream. We have targets and standard targets -- the latter carries a verdict. The ip/ip6tables validation functions will access t->verdict for the standard targets to fetch the jump offset or verdict for chainloop detection, but this happens before the targets get checked/validated. Thus we also need to check for verdict presence here, else t->verdict can point right after a blob. Spotted with UBSAN while testing malformed blobs. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-24netfilter: x_tables: add compat version of xt_check_entry_offsetsFlorian Westphal
commit fc1221b3a163d1386d1052184202d5dc50d302d1 upstream. 32bit rulesets have different layout and alignment requirements, so once more integrity checks get added to xt_check_entry_offsets it will reject well-formed 32bit rulesets. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-24netfilter: x_tables: assert minimum target sizeFlorian Westphal
commit a08e4e190b866579896c09af59b3bdca821da2cd upstream. The target size includes the size of the xt_entry_target struct. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-24netfilter: x_tables: kill check_entry helperFlorian Westphal
commit aa412ba225dd3bc36d404c28cdc3d674850d80d0 upstream. Once we add more sanity testing to xt_check_entry_offsets it becomes relvant if we're expecting a 32bit 'config_compat' blob or a normal one. Since we already have a lot of similar-named functions (check_entry, compat_check_entry, find_and_check_entry, etc.) and the current incarnation is short just fold its contents into the callers. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-24netfilter: x_tables: add and use xt_check_entry_offsetsFlorian Westphal
commit 7d35812c3214afa5b37a675113555259cfd67b98 upstream. Currently arp/ip and ip6tables each implement a short helper to check that the target offset is large enough to hold one xt_entry_target struct and that t->u.target_size fits within the current rule. Unfortunately these checks are not sufficient. To avoid adding new tests to all of ip/ip6/arptables move the current checks into a helper, then extend this helper in followup patches. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-24netfilter: x_tables: validate targets of jumpsFlorian Westphal
commit 36472341017529e2b12573093cc0f68719300997 upstream. When we see a jump also check that the offset gets us to beginning of a rule (an ipt_entry). The extra overhead is negible, even with absurd cases. 300k custom rules, 300k jumps to 'next' user chain: [ plus one jump from INPUT to first userchain ]: Before: real 0m24.874s user 0m7.532s sys 0m16.076s After: real 0m27.464s user 0m7.436s sys 0m18.840s Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-24netfilter: x_tables: don't move to non-existent next ruleFlorian Westphal
commit f24e230d257af1ad7476c6e81a8dc3127a74204e upstream. Ben Hawkes says: In the mark_source_chains function (net/ipv4/netfilter/ip_tables.c) it is possible for a user-supplied ipt_entry structure to have a large next_offset field. This field is not bounds checked prior to writing a counter value at the supplied offset. Base chains enforce absolute verdict. User defined chains are supposed to end with an unconditional return, xtables userspace adds them automatically. But if such return is missing we will move to non-existent next rule. Reported-by: Ben Hawkes <hawkes@google.com> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-24netfilter: x_tables: fix unconditional helperFlorian Westphal
commit 54d83fc74aa9ec72794373cb47432c5f7fb1a309 upstream. Ben Hawkes says: In the mark_source_chains function (net/ipv4/netfilter/ip_tables.c) it is possible for a user-supplied ipt_entry structure to have a large next_offset field. This field is not bounds checked prior to writing a counter value at the supplied offset. Problem is that mark_source_chains should not have been called -- the rule doesn't have a next entry, so its supposed to return an absolute verdict of either ACCEPT or DROP. However, the function conditional() doesn't work as the name implies. It only checks that the rule is using wildcard address matching. However, an unconditional rule must also not be using any matches (no -m args). The underflow validator only checked the addresses, therefore passing the 'unconditional absolute verdict' test, while mark_source_chains also tested for presence of matches, and thus proceeeded to the next (not-existent) rule. Unify this so that all the callers have same idea of 'unconditional rule'. Reported-by: Ben Hawkes <hawkes@google.com> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-24netfilter: x_tables: make sure e->next_offset covers remaining blob sizeFlorian Westphal
commit 6e94e0cfb0887e4013b3b930fa6ab1fe6bb6ba91 upstream. Otherwise this function may read data beyond the ruleset blob. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-24netfilter: x_tables: validate e->target_offset earlyFlorian Westphal
commit bdf533de6968e9686df777dc178486f600c6e617 upstream. We should check that e->target_offset is sane before mark_source_chains gets called since it will fetch the target entry for loop detection. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-24wext: Fix 32 bit iwpriv compatibility issue with 64 bit KernelPrasun Maiti
commit 3d5fdff46c4b2b9534fa2f9fc78e90a48e0ff724 upstream. iwpriv app uses iw_point structure to send data to Kernel. The iw_point structure holds a pointer. For compatibility Kernel converts the pointer as required for WEXT IOCTLs (SIOCIWFIRST to SIOCIWLAST). Some drivers may use iw_handler_def.private_args to populate iwpriv commands instead of iw_handler_def.private. For those case, the IOCTLs from SIOCIWFIRSTPRIV to SIOCIWLASTPRIV will follow the path ndo_do_ioctl(). Accordingly when the filled up iw_point structure comes from 32 bit iwpriv to 64 bit Kernel, Kernel will not convert the pointer and sends it to driver. So, the driver may get the invalid data. The pointer conversion for the IOCTLs (SIOCIWFIRSTPRIV to SIOCIWLASTPRIV), which follow the path ndo_do_ioctl(), is mandatory. This patch adds pointer conversion from 32 bit to 64 bit and vice versa, if the ioctl comes from 32 bit iwpriv to 64 bit Kernel. Signed-off-by: Prasun Maiti <prasunmaiti87@gmail.com> Signed-off-by: Ujjal Roy <royujjal@gmail.com> Tested-by: Dibyajyoti Ghosh <dibyajyotig@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-24vxlan, gre, geneve: Set a large MTU on ovs-created tunnel devicesDavid Wragg
[ Upstream commit 7e059158d57b79159eaf1f504825d19866ef2c42 ] Prior to 4.3, openvswitch tunnel vports (vxlan, gre and geneve) could transmit vxlan packets of any size, constrained only by the ability to send out the resulting packets. 4.3 introduced netdevs corresponding to tunnel vports. These netdevs have an MTU, which limits the size of a packet that can be successfully encapsulated. The default MTU values are low (1500 or less), which is awkwardly small in the context of physical networks supporting jumbo frames, and leads to a conspicuous change in behaviour for userspace. Instead, set the MTU on openvswitch-created netdevs to be the relevant maximum (i.e. the maximum IP packet size minus any relevant overhead), effectively restoring the behaviour prior to 4.3. Signed-off-by: David Wragg <david@weave.works> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.0.4) at 2024-06-21 03:30:32 +0000