summaryrefslogtreecommitdiff
path: root/sound/soc/fsl/fsl_ssi.c
AgeCommit message (Collapse)Author
2014-01-31Merge tag 'sound-fix-3.14-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "The big chunks here are the updates for oxygen driver for Xonar DG devices, which were slipped from the previous pull request. They are device-specific and thus not too dangerous. Other than that, all patches are small bug fixes, mainly for Samsung build fixes, a few HD-audio enhancements, and other misc ASoC fixes. (And this time ASoC merge is less than Octopus, lucky seven :)" * tag 'sound-fix-3.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (42 commits) ALSA: hda/hdmi - allow PIN_OUT to be dynamically enabled ALSA: hda - add headset mic detect quirks for another Dell laptop ALSA: oxygen: Xonar DG(X): cleanup and minor changes ALSA: oxygen: Xonar DG(X): modify high-pass filter control ALSA: oxygen: Xonar DG(X): modify input select functions ALSA: oxygen: Xonar DG(X): modify capture volume functions ALSA: oxygen: Xonar DG(X): use headphone volume control ALSA: oxygen: Xonar DG(X): modify playback output select ALSA: oxygen: Xonar DG(X): capture from I2S channel 1, not 2 ALSA: oxygen: Xonar DG(X): move the mixer code into another file ALSA: oxygen: modify CS4245 register dumping function ALSA: oxygen: modify adjust_dg_dac_routing function ALSA: oxygen: Xonar DG(X): modify DAC/ADC parameters function ALSA: oxygen: Xonar DG(X): modify initialization functions ALSA: oxygen: Xonar DG(X): add new CS4245 SPI functions ALSA: oxygen: additional definitions for the Xonar DG/DGX card ALSA: oxygen: change description of the xonar_dg.c file ALSA: oxygen: export oxygen_update_dac_routing symbol ALSA: oxygen: add mute mask for the OXYGEN_PLAY_ROUTING register ALSA: oxygen: modify the SPI writing function ...
2014-01-29Merge branch 'for-linus' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds
Pull slave-dma updates from Vinod Koul: - new driver for BCM2835 used in R-pi - new driver for MOXA ART - dma_get_any_slave_channel API for DT based systems - minor fixes and updates spread acrooss driver [ The fsl-ssi dual fifo mode support addition clashed badly with the other changes to fsl-ssi that came in through the sound merge. I did a very rough cut at fixing up the conflict, but Nicolin Chen (author of both sides) will need to verify and check things ] * 'for-linus' of git://git.infradead.org/users/vkoul/slave-dma: (36 commits) dmaengine: mmp_pdma: fix mismerge dma: pl08x: Export pl08x_filter_id acpi-dma: align documentation with kernel-doc format dma: fix vchan_cookie_complete() debug print DMA: dmatest: extend the "device" module parameter to 32 characters drivers/dma: fix error return code dma: omap: Set debug level to debugging messages dmaengine: fix kernel-doc style typos for few comments dma: tegra: add support for Tegra148/124 dma: dw: use %pad instead of casting dma_addr_t dma: dw: join split up messages dma: dw: fix style of multiline comment dmaengine: k3dma: fix sparse warnings dma: pl330: Use dma_get_slave_channel() in the of xlate callback dma: pl330: Differentiate between submitted and issued descriptors dmaengine: sirf: Add device_slave_caps interface DMA: Freescale: change BWC from 256 bytes to 1024 bytes dmaengine: Add MOXA ART DMA engine driver dmaengine: Add DMA_PRIVATE to BCM2835 driver dma: imx-sdma: Assign a default script number for ROM firmware cases ...
2014-01-21ASoC: fsl_ssi: Do not print 'baud clock' error message all the timeFabio Estevam
Currently everytime we get the following message on boot: fsl-ssi-dai 202c000.ssi: could not get baud clock: -2 This is not really useful information to get on every boot, so make it a debug message instead. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-01-21ASoC: fsl_ssi: We do support master mode nowFabio Estevam
Since commit aafa85e71a (ASoC: fsl_ssi: Add DAI master mode support for SSI on i.MX series) master mode is supported, so update the comments and code to reflect that. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-01-16Merge remote-tracking branches 'asoc/topic/adsp', 'asoc/topic/atmel', ↵Mark Brown
'asoc/topic/bcm2835', 'asoc/topic/docs', 'asoc/topic/fsl', 'asoc/topic/generic', 'asoc/topic/kirkwood', 'asoc/topic/mc13783', 'asoc/topic/mxs', 'asoc/topic/nuc900', 'asoc/topic/sai', 'asoc/topic/sh', 'asoc/topic/ssm2602', 'asoc/topic/tlv320aic3x', 'asoc/topic/twl4030', 'asoc/topic/ux500', 'asoc/topic/width' and 'asoc/topic/x86' into for-tiwai
2014-01-16Merge remote-tracking branch 'asoc/topic/pcm' into for-tiwaiMark Brown
2014-01-14ASoC: fsl: Don't mix SNDRV_PCM_RATE_CONTINUOUS with specific ratesLars-Peter Clausen
SNDRV_PCM_RATE_CONTINUOUS means that all rates (possibly limited to a certain interval) are supported. There is no need to manually set other rate bits. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-01-09ASoC: fsl_ssi: Set default slot number for common casesNicolin Chen
For those platforms using DAI master mode like I2S, it's better to pre-set a default slot number so that there's no need for these common cases to set the slot number from its machine driver any more. Signed-off-by: Nicolin Chen <Guangyu.Chen@freescale.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-01-09ASoC: fsl-ssi: Add missing clk_disable_unprepare() on error in fsl_ssi_probe()Wei Yongjun
Add the missing clk_disable_unprepare() before return from fsl_ssi_probe() in the request irq error handling case. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-01-09ASoC: fsl-ssi: Fix stats compile warningMarkus Pargmann
single_open requires a function with signature 'int (*)(struct seq_file *, void *)'. This patch fixes the warning by fixing the wrong return type of fsl_ssi_stats_show. Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-01-08ASoC: fsl-ssi: Drop ac97 specific trigger functionMarkus Pargmann
The normal trigger function can now be used for AC97. Drop AC97 trigger function. Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-01-08ASoC: fsl-ssi: Move RX/TX configuration to seperate functionsMarkus Pargmann
This patch defines the appropriate register values for different oparation modes and IP versions. We have to handle DMA/FIQ, AC97, DEBUG-IRQs and offline/online configuration support. With this patch we cleanup some driver code that was not reference manual conform and try to cleanup the whole trigger function to seperate the actual register values from the enable/disable logic, which is now hidden in fsl_ssi_config helpers. Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-01-08ASoC: fsl-ssi: Add configuration helper functionsMarkus Pargmann
This patch adds a struct 'fsl_ssi_rxtx_reg_val' which holds register values necessary to enable rx/tx. Based on those preset register values, the added configuration functions will cleanly enable/disable different parts of the SSI IP while supporting online/offline configuration. Different operating modes can be setup directly as different register values in fsl_ssi_reg_val. These functions and structs will help to cleanup and simplify the trigger function to support many different IP versions (online/offline configuration) and different operating modes. Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-01-08ASoC: fsl-ssi: Add offline_config flagMarkus Pargmann
imx50-ssi and later versions of this IP support online reconfiguration of all registers. The reference manual does not list any registers that can only be configured while the SSI unit is disabled. This patch introduces the flag for later use. Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-01-08ASoC: fsl-ssi: Fix interrupt stats for imxMarkus Pargmann
irqs should only be requested/released with enabled DMA. Previously interrupt statistics where disabled for IMX Processors because of different writeable SISR bits. This patch introduces support for irqstats on imx processors again by creating a sisr writeback mask and introducing a imx35-ssi compatible. Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-01-08ASoC: fsl-ssi: Add imx51-ssi and of_device_id matchingMarkus Pargmann
There is a small but significant difference between imx21-ssi and imx51-ssi and above. imx21-ssi does not allow online reconfiguration of some registers. They have to be configured at the beginning. imx51-ssi has to reconfigure the SSI unit while it is running. Otherwise it would not be possible to have two streams in parallel. The new SDMA unit in imx51 and above has to be configured before the first DMA request arrives. Therefor we need to setup TDMAE/RDMAE just before starting the stream. This patch introduces distinct imx51-ssi as compatible and adds of_device_id matching in the probe function. Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-01-08ASoC: fsl-ssi: Move sysfs stats to debugfsMarkus Pargmann
Interrupt statistics of fsl_ssi are mainly for debugging purpose. Most of those interrupts show error states, e.g. under/overflow. The stats should be exposed via debugfs instead of sysfs. This patch moves the statistics file to debugfs. Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-01-08ASoC: fsl-ssi: Fix probe error handlingMarkus Pargmann
This patch fixes the error handling in the fsl-ssi probe function. Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-01-07ASoC: fsl: fsl_ssi: Use '%ld' to print 'long int'Fabio Estevam
Commit 6873ee464a (ASoC: fsl_ssi: Fix printing return code on clk error) caused the following build warning: sound/soc/fsl/fsl_ssi.c: In function 'fsl_ssi_probe': sound/soc/fsl/fsl_ssi.c:1196:6: warning: format '%d' expects argument of type 'int', but argument 3 has type 'long int' [-Wformat] Fix it by using '%ld' to print the 'long int' format. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-01-06ASoC: fsl_ssi: Fix printing return code on clk errorAlexander Shiyan
Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-12-19ASoC: fsl_ssi: Add DAI master mode support for SSI on i.MX seriesNicolin Chen
This patch adds three main functions for DAI master mode: set_dai_fmt(), set_dai_sysclk() and set_dai_tdm_slot(), and one essential baud clock accordingly. After appending this patch, the fsl_ssi driver on i.MX series has the ability to derive LRCLK and BCLK from baud clock source so as to support some audio Codecs which can only be used in slave mode. Signed-off-by: Nicolin Chen <Guangyu.Chen@freescale.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-12-16ASoC: fsl_ssi: Add dual fifo mode supportNicolin Chen
By enabling dual fifo mode, it would allow SSI enter a better performance to transimit/receive data without occasional hardware underrun/overrun. Signed-off-by: Nicolin Chen <b42378@freescale.com> Acked-by: Timur Tabi <timur@tabi.org> Acked-by: Mark Brown <broonie@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-12-03ASoC: fsl_ssi: Implement symmetric_channels and symmetric_samplebitsNicolin Chen
Since we introduced symmetric_channels and symmetric_samplebits, we implement these two features to fsl_ssi so as to drop some no-more-needed code and make the driver neat and clean. Signed-off-by: Nicolin Chen <b42378@freescale.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-12-02ASoC: fsl_ssi: Add monaural audio support for non-ac97 interfaceNicolin Chen
The normal mode of SSI allows it to send/receive data to/from the first slot of each period. So we can use this normal mode to trick I2S signal by puting/getting data to/from the first slot only (the left channel) so as to support monaural audio playback and recording. Signed-off-by: Nicolin Chen <b42378@freescale.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-12-02ASoC: fsl: Use devm_snd_dmaengine_pcm_register()Lars-Peter Clausen
Makes the code shorter. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-11-24ASoC: fsl-ssi: Move ac97 specific setup to seperate functionMarkus Pargmann
This is a pure cleanup patch to increase code readability. Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-09-26ASoC: fsl_ssi: let check zero instead of check NO_IRQChen Gang
NO_IRQ may be defined as '(unsigned int) -1' in some architectures (arm, sh ...), and either may not be defined in some architectures which can enable SND_SOC_FSL_SSI (e.g. allmodconfig for arc). When irq_of_parse_and_map() fails, it will always return 0, so need check zero instead of NO_IRQ, or will cause compiling issue or run time bug in some architectures. Signed-off-by: Chen Gang <gang.chen@asianux.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-09-24ASoC: fsl: fsl_ssi: Fix simultaneous capture and playbackFabio Estevam
When doing simultaneous capture and playback on a mx6 board we get the following error: $ arecord -f cd | aplay -f cd imx-sgtl5000 sound.13: set sample size in capture stream first fsl-ssi-dai 2028000.ssi: ASoC: can't open interface 2028000.ssi: -11 ALSA lib pcm_dmix.c:1018:(snd_pcm_dmix_ open) unable to open slave aplay: main:660: audio open error: Device or resource busy Recording WAVE 'stdin' : Signed 16 bit Little Endian, Rate 44100 Hz, Stereo The 'arecord -f cd | aplay -f cd' always trigger cause the 'if (!first_runtime->sample_bits)' block to be true which returns an error. Adjust the logic inside fsl_ssi_startup(), so that we do not always hit the error when playing 'arecord | aplay' line for the first time. Reported-by: Chris Clepper <cgclepper@gmail.com> Suggested-by: Nicolin Chen <b42378@freescale.com> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-09-17ASoC: fsl_ssi: Remove redundant dev_set_drvdataSachin Kamat
Driver core sets the driver data to NULL on detach. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-09-17ASoC: fsl_ssi: Staticize local symbolsSachin Kamat
Local symbols used only in this file are made static. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-26ASoC: fsl_ssi: Remove unnecessary dev_set_drvdata()Fabio Estevam
Driver core clears the driver data to NULL after device_release or on probe failure, so just remove it from here. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-22ASoC: fsl: disable ssi irq for imxMichael Grzeschik
We have to disable the ssi irq, as it is not safe for all platforms to write back into the status register. It also runs into non-linefetch aborts. Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-22ASoC: fsl-ssi: imx-pcm-fiq bugfixMichael Grzeschik
imx-pcm-fiq is checking for TE RE bits, so enable them only if necessary. Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-22ASoC: fsl-ssi: add SSIEN errata work aroundSteffen Trumtrar
The chip errata for the i.MX35, Rev.2 has the following errata: ENGcm06222: SSI:Transmission does not take place in bit length early frame sync configuration The workaround states, that TX_EN and SSI_EN bits should be set in the same register write. As the next errata in the document (ENGcm06532) says to always write RX_EN and TX_EN in the same register write in network mode. Therefore include the whole write to CCSR_SSI_SCR_TE and CCSR_SSI_SCR_RE into the write to CCSR_SSI_SCR_SSIEN Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-22ASoC: fsl-ssi: ac97-slave supportMarkus Pargmann
This patch adds ac97-slave support. For ac97, the registers have to be setup earlier than for other ssi modes because there is some communication with the external device before streaming. So this patch introduces a fsl_ssi_setup function to setup the registers for different ssi operation modes seperately. This patch was tested with imx27-pca100. Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Tested-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-20ASoC: fsl: fsl_ssi: Fix the order of resources removalFabio Estevam
In fsl_ssi_remove() we need to remove the resources in the opposite order that they were acquired in probe. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-06ASoC: fsl-ssi: Use generic DMA bindings if possibleMarkus Pargmann
There may be some platforms using fsl-ssi that do not have a DMA driver with generic DMA bindings. So this patch adds support for the generic DMA bindings, while still accepting the old "fsl,dma-events" property if "dmas" is not found. Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Tested-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-06ASoC: fsl-ssi: Add support for imx-pcm-fiqMarkus Pargmann
Add support for non-dma pcm for imx platforms with imx-pcm-fiq support. Instead of imx-pcm-audio, in this case imx-pcm-fiq-audio device is added and the SIER flags are set differently. We need imx-pcm-fiq for some boards that use an incompatible codec. imx-pcm-fiq handles those codecs differently and allows to operate with them. DMA is not possible because some data sent by the codecs, e.g. wm9712, is not in the datastream. Also some data is mixed up in the fifos, so that we need to sort them out manually. Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Tested-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-25ASoC: fsl: Set sdma peripheral type directlyNicolin Chen
Let CPU DAI drivers set SDMA periperal type directly to support more dma types(SPDIF, ESAI) other than only two for SSI. This will easily allow some non-SSI drivers to use the imx-pcm-dma as well. Signed-off-by: Nicolin Chen <b42378@freescale.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-22ASoC: fsl: fsl_ssi: Add MODULE_ALIASFabio Estevam
Add MODULE_ALIAS, so that auto module loading can work. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Timur Tavi <timur@tabi.org> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-19ASoC: fsl_ssi: Provide register I/O functions by defaultMark Brown
Use the ARM version by default as that's the more generally portable one, it doesn't matter if they work well on random platforms when the goal is only build coverage. Signed-off-by: Mark Brown <broonie@linaro.org> Acked-by: Timur Tabi <timur@tabi.org>
2013-07-17ASoC: fsl: fsl_ssi: Check the return value from clk_prepare_enable()Fabio Estevam
clk_prepare_enable() may fail, so let's check its return value and propagate it in the case of error. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-17ASoC: fsl: fsl_ssi: Use devm_ functionsFabio Estevam
Using devm_ functions can make the code cleaner and smaller. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-15ASoC: fsl: Disable SSI in trigger() if RE/TE are both clearedNicolin Chen
The code enabled SSIEN when triggered by SNDRV_PCM_TRIGGER_START, so move the disable code to SNDRV_PCM_TRIGGER_STOP for symmetric. This also allows us to use the SSI driver more flexible so that it can support some use cases like "aplay S16_LE.wav S24_LE.wav" which would call the driver in sequence like: startup()->hw_params(S16_LE)->trigger(START)->tirgger(STOP)-> hw_params(S24_LE)->trigger(START)->tirgger(STOP)->shutdown() If we disable SSIEN in shutdown(), the second hw_params() would bypass the sample bits setting while using symmetric_rate. Signed-off-by: Nicolin Chen <b42378@freescale.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-05-15ASoC: fsl: remove use of imx-pcm-audio from fsl_ssiShawn Guo
Rather than instantiating imx-pcm-audio to call imx_pcm_dma_init(), fsl_ssi can just directly call it to save the use of imx-pcm-audio. With this change, fsl_ssi becomes not only a cpu DAI but also a platform device, so updates platform device setup in imx-sgtl5000 accordingly. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-04-18Merge tag 'asoc-v3.10-2' of ↵Takashi Iwai
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next ASoC: More updates for v3.10 The main additional change here is Lars-Peter's DMA work plus the platform conversions which have been tested - getting this in mainline will make life easier for development after the merge window. These factor a large chunk of code out of the drivers for the platforms using dmaengine, greatly simplifying development.
2013-04-17ASoC: imx: Setup dma data in DAI probeLars-Peter Clausen
This allows us to access the DAI DMA data when we create the PCM. We'll use this when converting imx to generic DMA engine PCM driver. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Tested-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-04-12Merge remote-tracking branch 'asoc/topic/dma' into asoc-nextMark Brown
2013-04-05ASoC: fsl: Use common DAI DMA data structLars-Peter Clausen
Use the common DAI DMA data struct for fsl/imx, this allows us to use the common helper function to configure the DMA slave config based on the DAI DMA data. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Tested-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-03-26ASoC: switch over to use snd_soc_register_component() on fsl ssiKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
generated by cgit v1.2.3 (git 2.0.4) at 2024-05-27 19:40:01 +0000