summaryrefslogtreecommitdiff
path: root/sound/soc
AgeCommit message (Collapse)Author
2010-09-14ASoC: fsi codecs: Update card name fieldKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-09-11ASoC: S3C: Fix PCM TXFIFO_DIPSTICK valueSeungwhan Youn
This patch modify FIFO_DIPSTICK value of PCM TX FIFO to be a optimal one. Privious value (0x20) did not support 'Almost_full' of PCM FIFO for the DMA request. Signed-off-by: Seungwhan Youn <sw.youn@samsung.com> Acked-by: Jassi Brar <jassi.brar@samsung.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-09-11ASoC: S3C: Fix PCM RX FIFO settingsSeungwhan Youn
When PCM capture, sound recorded abnormally because of RX FIFO threshold settings are missing. So, This patch modify PCM RX FIFO setting codes same as TX. And for DMA, if PCM RXFIFO_DIPSTICK is not '0', it doesn't effect to DMA request, because DMA refer RX_FIFO_EMPTY flag as the DMA request. Signed-off-by: Seungwhan Youn <sw.youn@samsung.com> Acked-by: Jassi Brar <jassi.brar@samsung.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-09-11ASoC: Fix off-by-one bug in WM8962 register cache size configurationDimitris Papastamos
This is a simple off-by-one bug, the size of the register cache is incorrectly set to the maximum register index. Fix it by adding one. Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-09-11ASoC: WL1273 FM Radio: Eliminate unnecessary error return value.Matti J. Aaltonen
With this change it's not a error to call wl1273_set_audio_route when the codec is active if the new routing value is the same as the current active setting. Signed-off-by: Matti J. Aaltonen <matti.j.aaltonen@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-09-11ASoC: tlv320aic3x: Optimize PLL programming in aic3x_set_bias_levelJarkko Nikula
There is only need to enable/disable once the PLL when the bias is going between on, prepare, standby and off states. Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-09-10ASoC: Fix incorrect register cache size configurationDimitris Papastamos
The reg_cache_size is the number of elements in the register cache, not the size of the cache itself. This is not a problem if the size of each element of the cache is 1 byte but it matters in any other case. Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-09-10ASoC: ad1980 - set reg_cache_default to ad1980_regAxel Lin
Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-09-10ASoC: fsi-hdmi: remove unneeded headerKuninori Morimoto
This patch solve below report from Guennadi. But I didn't remove #include <sound/sh_fsi.h>. Because it have FSI_PORT_B define which is used on this file. > +#include <linux/platform_device.h> > +#include <sound/sh_fsi.h> > +#include <video/sh_mobile_hdmi.h> Now that everything is done with strings - do you still need these headers? Reported-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Reviewed-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-09-10ASoC: Samsung: Debug PCM platform device nameJassi Brar
The PCM controller platform devices are registered by the name 'samsung-pcm', so use the same in the CPU driver. Signed-off-by: Jassi Brar <jassi.brar@samsung.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-09-10ASoC: S3C: AC97: Remove the -dai suffixJassi Brar
Drop the invalid -dai suffix appended to the Samsung AC97 CPU DAI. Signed-off-by: Jassi Brar <jassi.brar@samsung.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-09-10ASoC: fsi codecs: modify menu attribute on KconfigKuninori Morimoto
Current SND_FSI_xxx menu attributes were bool, but it should be tristate. This patch solve below report from Guennadi "bool" means, if someone is linking the whole ASoC into the kernel, they will not be able to build this as a module. Not a big deal, but you're stealing some freedom from the user. Reported-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-09-10ASoC: fsi-ak4642: modify platform_nameKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Laim Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-09-08OMAP: McBSP: Fix static function warningG, Manjunath Kondaiah
This patch fixes sparse warning due non declaration of static function sound/soc/omap/omap-mcbsp.c:783:5: warning: symbol 'omap_mcbsp_st_info_volsw' was not declared. Should it be static? Signed-off-by: G, Manjunath Kondaiah <manjugk@ti.com> Cc: alsa-devel@alsa-project.org Cc: Jarkko Nikula <jhnikula@gmail.com> Cc: Peter Ujfalusi <peter.ujfalusi@nokia.com> Cc: Liam Girdwood <lrg@slimlogic.co.uk> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Nishanth Menon <nm@ti.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Jarkko Nikula <jhnikula@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-09-08ASoC: rx1950: Fix clkdiv for 16khz and 48khzVasily Khoruzhick
Usage of 256 as clkdiv gives better rounding error (<1%) for 16khz and 48khz Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-09-08ASoC: UDA1380: Add delay between power on and resetVasily Khoruzhick
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-09-08ASoC: rx1950: remove unnecessary headersVasily Khoruzhick
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-09-08ASoC: rx1950: check that machine is rx1950 in glue driverVasily Khoruzhick
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-09-07ASoC: Remove export of CS4270 DAIMark Brown
Not needed with multi-component. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Timur Tabi <timur@freescale.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-09-06ASoC: Staticise WM9712 DAI listMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-09-06ASoC: Fix cut'n'paste comment in WM8994Mark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-09-06Merge branch 'for-2.6.37' of ↵Mark Brown
git://git.kernel.org/pub/scm/linux/kernel/git/lrg/asoc-2.6 into for-2.6.37
2010-09-06ASoC: wm8753, remove dead codeJiri Slaby
There is adangling code in wm8753_probe which is never executed. Remove it. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Acked-by: Liam Girdwood <lg@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-09-06ASoC: tlv320aic3x: Fix null pointer dereference when pdata is not setJarkko Nikula
Null pointer dereference will occur from *setup = pdata->setup if pdata is not set. Fix this by moving assignments from pdata inside non-null case. Thanks to Jiri Slaby <jirislaby@gmail.com> for noticing. Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Cc: Jiri Slaby <jirislaby@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-09-03ASoC: ak4642: Revive ak4642_snd_controlsKuninori Morimoto
This patch revive ak4642_snd_controls which was removed on f0fba2ad1b6b53d5360125c41953b7afcd6deff0 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-09-02ASoC: pl022_ds.c: Add of_node_put to avoid memory leakJulia Lawall
Add a call to of_node_put in the error handling code following a call to of_parse_phandle. This patch also moves the existing call to of_node_put tothe end of the error handling code, to make it possible to jump to of_node_put without doing the other cleanup operations. These appear to be disjoint operations, so the ordering doesn't matter. The semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r exists@ local idexpression x; expression E,E1,E2; statement S; @@ *x = (of_find_node_by_path |of_find_node_by_name |of_find_node_by_phandle |of_get_parent |of_get_next_parent |of_get_next_child |of_find_compatible_node |of_match_node |of_find_node_by_type |of_find_node_with_property |of_find_matching_node |of_parse_phandle )(...); ... if (x == NULL) S <... when != x = E *if (...) { ... when != of_node_put(x) when != if (...) { ... of_node_put(x); ... } ( return <+...x...+>; | * return ...; ) } ...> ( E2 = x; | of_node_put(x); ) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Acked-by: Timur Tabi <timur@freescale.com> Acked-by: Liam Girdwood <lrg@slimlogic.uo.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-09-02ASoC: kirkwood: add alias to pcm moduleArnaud Patard (Rtp)
Allow snd-soc-kirkwood autoloading by adding an alias. Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-09-01ASoC: Added a missing 32-bit PCM format, to the wm8994 codec.Ian Lartey
Signed-off-by: Ian Lartey <ian@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-09-01ASoC: Implement WM8994 DAC data source muxesMark Brown
Allow selection of the channel used for input to the AIFnDAC signals. This isn't integrated into DAPM since we treat the data as a single mono channel until just beyond this selection so it ends up having no visible effect on the routing. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-09-01ASoC: fsi-codec: Add FSI - HDMI supportKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-08-31ASoC: OpenRD Client : Fix naming breakage due to multicomponent supportArnaud Patard (Rtp)
multicomponent support added/changed some device name but added some typos, breaking existing OpenRD Client support. Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-08-31ASoC: fsi-ak4642/fsi-da7210: modify dai link settings for card detectKuninori Morimoto
This patch modify dai link - platform_name: sh_fsi/sh_fsi2 are used for FSI driver - codec_name: ak4642/ak4643 are used for ak4642 driver This is quick hack. I should modify it more wisely in future Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-08-31ASoC: Add HP iPAQ RX1950 supportVasily Khoruzhick
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-08-31ASoC: uda1380: make driver more powersave-friendlyVasily Khoruzhick
Disable some codec modules in standby mode, completely disable codec in off mode to save some power. Fix suspend/resume: mark mixer regs as dirty on resume to restore mixer values, otherwise driver produces no sound (master is muted by default). Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> Acked-by: Marek Vasut <marek.vasut@gmail.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-08-31ASoC: fix au1x platformManuel Lauss
This patch fixes up the au1x audio platform after the multi-component merge: - compile fixes and updates to get DB1200 platform audio working again, - removal of global variables in AC97/I2S/DMA(PCM) modules. The AC97 part is limited to one instance only for now due to issues with getting at driver data in the soc_ac97_ops. Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-08-28ASoC: tlv320aic3x: Sanitize output controlsJarkko Nikula
Currently output controls are not uniform. Some routes are adjusted by mono controls that don't match to associated mixer switch, many routes are not covered at all and stereo controls have following variants: - L-to-L & R-to-R - R-to-L & R-to-R - L-to-L & R-to-L This patch attempts to fix these issues. First, for the convenience, only direct L-to-L, R-to-R and [L | R]-to-Mono routes are controlled by the stereo controls. This logic is also used with the output pin mute controls so all of them except mono output are controlled by stereo switches. Then rest of the swapped L-to-R and R-to-L routes are controlled by the mono controls that map to mixer switches with a same name. Mixers can then associate these switches and volumes together. Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-08-28ASoC: tlv320aic3x: Reimplement output mixersJarkko Nikula
It turned out that the output mixers and their routes were misdefined: They are not mixing output pins to internal signals but opposite. This has worked for direct left-to-left and right-to-right routes since for those there are complete routes. For swapped left-to-right and right-to-left routes this is not working since there are no routes defined between them. Another consequence is that those misdefined mixers are incorrectly routed to several output pins leading unnecessary pin powerings even if there is no route active to them. Fix these by reimplementing the output mixers and routes as they are in hardware. For completeness add also a few missing links between internal signals and outputs. Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-08-28ASoC: tlv320aic3x: Sort output pin control registers in header fileJarkko Nikula
Each output pin has 7 consecutive control registers in tlv320aic3x register map. First 6 of them control the signal mixing and one is for output level and power control. Sort these registers as they are sorted clearly in hardware, it makes also definitions more readable and easier to pinpoint missing register definitions. Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-08-28ASoC: tlv320aic3x: Fix remaining output pin switch namesJarkko Nikula
Bit 3 in output pin_CTRL register mutes the whole output pin not just the route from DAC so remove misleading DAC from control name. Currently only "Line[L | R] Playback Switch" were correct. Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-08-28ASoC: ad1980: remove unneeded function declarationUwe Kleine-König
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-08-28ASoC: Complete supported clock ratios and rate constraints for wm8741Ian Lartey
Signed-off-by: Ian Lartey <ian@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-08-27Merge branch 'for-2.6.36' into for-2.6.37Mark Brown
2010-08-27ASoC: soc-core: fix debugfs_pop_time file permissionsAxel Lin
I think this is a typo, debugfs_pop_time should not be executable. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Liam Girdwood <lrg@slimloogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-08-25ASoC: pxa-ssp: fix a memory leak in pxa_ssp_remove()Axel Lin
The "priv" allocated in pxa_ssp_probe() should be kfreed in pxa_ssp_remove(). Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-08-23Merge branch 'for-2.6.36' into for-2.6.37Mark Brown
2010-08-23ASoC: Enable autoloading of pxa2xx CPU I2S driver with module aliasIan Lartey
Signed-off-by: Ian Lartey <ian@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-08-23ASoC: Make codec dai naming for WM8741 consistentIan Lartey
Signed-off-by: Ian Lartey <ian@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-08-23ASoC: pxa2xx-i2s is the proper name of the I2S DAI, not pxa-i2s.Ian Lartey
Signed-off-by: Ian Lartey <ian@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-08-23ASoC: i.MX ssi: use SSI_STCCR in synchronous modeSascha Hauer
In synchronous mode the SSI_SRCCR values are ignored. Instead SSI_STCCR must be used for both receiving and transmitting. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-08-23ASoC: Add build infrastructure for WL1273Mark Brown
The Makefile and Kconfig updates for WL1273 appear to have been mising from the patch posted, add them. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
generated by cgit v1.2.3 (git 2.0.4) at 2024-04-28 17:57:49 +0000