summaryrefslogtreecommitdiff
path: root/sound/soc
AgeCommit message (Collapse)Author
2010-08-23ASoC: Log WM8994 separate ADC LRCLKs every time we configureMark Brown
This makes it that little bit easier to spot the diagnostics in the logs. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-08-23Merge remote branch 'broonie-asoc/for-2.6.37' into for-2.6.37Liam Girdwood
2010-08-23ASoC: omap: rx51: Use gpio_set_value_cansleep for speaker amp controlJarkko Nikula
Speaker amplifier is controlled by TWL4030 GPIO which may sleep. Therefore use gpio_set_value_cansleep to get rid of runtime warning that is introduced after the commit 9c4ba94 and to get a stack trace if ever executing this code in atomic context. Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-08-23ASoC: Fix tlv320aic3x GPIO initializationJarkko Nikula
aic3x_init does a soft reset first and thus TLV320AIC3x GPIO setup must be done after doing the basic init. Before multi-component the init was done at i2c probe time and GPIO setup at soc probe time. Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-08-20ASoC: mpc8610: replace of_device with platform_deviceTimur Tabi
'struct of_device' no longer exists, and its functionality has been merged into platform_device. Update the MPC8610 HPCD audio drivers (fsl_ssi, fsl_dma, and mpc8610_hpcd) accordingly. Also add a #include for slab.h, which is now needed for kmalloc and kfree. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-08-20Merge branch 'for-2.6.37' of ↵Mark Brown
git://git.kernel.org/pub/scm/linux/kernel/git/lrg/asoc-2.6 into for-2.6.37
2010-08-20ASoC: Don't call DAI registration for CODECs with no DAIMark Brown
Otherwise we generate worrying (but benign) warnings for amps. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-08-20ASoC: TI WL1273 FM Radio Codec.Matti J. Aaltonen
This is an ALSA codec for the Texas Instruments WL1273 FM Radio. Signed-off-by: Matti J. Aaltonen <matti.j.aaltonen@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-08-20ASoC: add support for the Freescale P1022 DS reference boardTimur Tabi
The Freescale P1022 is a dual-core e500-based SOC with multimedia capabilities, specifically the same SSI audio controller on the MPC8610. The P1022 DS reference board includes a P1022 and a Wolfson Microelectronics WM8776 codec. Signed-off-by: Timur Tabi <timur@freescale.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-08-20ASoC: remove include of pxa2xx-pcm.h in pxa2xx-ac97.cAxel Lin
Fix reference to moved header file, which was unused anyway. This change fixes below build error: CC sound/soc/pxa/pxa2xx-ac97.o sound/soc/pxa/pxa2xx-ac97.c:27:24: error: pxa2xx-pcm.h: No such file or directory make[3]: *** [sound/soc/pxa/pxa2xx-ac97.o] Error 1 make[2]: *** [sound/soc/pxa] Error 2 make[1]: *** [sound/soc] Error 2 make: *** [sound] Error 2 Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-08-20ASoC: Add support for tlv320aic3007 to tlv320aic3x codec.Randolph Chung
This patch adds support for the tlv320aic3007 codec to the tlv320aic3x driver. The tlv320aic3007 is similar to the aic31, but has an additional class-D speaker amp. The speaker amp control register overlaps with the mono output register of other codecs in this family, so we add logic to identify the actual codec being registered to set things up accordingly. Signed-off-by: Randolph Chung <tausq@parisc-linux.org> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-08-20ASoC: add support for separate codec DAIs to the fsl_dma driverTimur Tabi
Some codecs have separate DAIs for playback and capture, so the DMA driver should allocate a DMA buffer only for the streams that are valid when the driver is opened. Signed-off-by: Timur Tabi <timur@freescale.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-08-20ASoC: e740_wm9705 - free gpio in e740_exit()Axel Lin
In e740_init(), we call gpio_request() for GPIO_E740_MIC_ON, GPIO_E740_AMP_ON and GPIO_E740_WM9705_nAVDD2. We should free the these gpio accordingly in e740_exit(). Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-08-19ASoC: Use a more adequate name for the CX20442 codec DAIJanusz Krzysztofik
In the process of unification of codec DAI names while implementing multi-component, the CX20442 codec DAI has been renamed to "cx20442-hifi". This new name seems not adequate for a 8kHz voice codec. Use a better name, "cx20442-voice", as suggested by Liam Girdwood. Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-08-19ASoC: Configure symmetric rates for tlv320aic3xRandolph Chung
The tlv320aic3x codec driver only supports symmetric rates for capture/ playback. Set the flag in the DAI accordingly. Signed-off-by: Randolph Chung <tausq@parisc-linux.org> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-08-18asoc/multi-component: fsl: add support for variable SSI FIFO depthTimur Tabi
Add code that programs the DMA and SSI controllers differently based on the FIFO depth of the SSI. The SSI devices on the MPC8610 and the P1022 are identical in every way except one: the transmit and receive FIFO depth. On the MPC8610, the depth is eight. On the P1022, it's fifteen. The device tree nodes for the SSI include a "fsl,fifo-depth" property that specifies the FIFO depth. Signed-off-by: Timur Tabi <timur@freescale.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-08-18ASoC: add saarb machine driver for 88pm860xHaojian Zhuang
88PM860x codec is used in Marvell saarb development board. 88PM860x codec is used as master mode for SSP communication. Only I2S format is supported. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-08-18ASoC: add tavorevb3 machine driver for 88pm860xHaojian Zhuang
Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-08-18ASoC: add 88pm860x codec driverHaojian Zhuang
Add 88PM860x codec driver. 88PM860x codec supports two interfaces. And it also supports headset/mic/hook/short detection. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-08-18ASoC: Add simplfied device registration for Atmel SSC devicesMark Brown
Since the SSC is already being registered as a device under arch and the DMA and SSC hardware are pretty much the same provide a simplified device registration function for the Atmel SSC which will add the ASoC-specific devices within the ASoC code, parenting the SSC device off the actual SSC device. Also use it in the sam9g20-ek driver. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-08-18ASoC: Fix device name for AT91SAM9G20-EK devicesMark Brown
A couple of typos in the multi-component conversion. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-08-18ASoC: Support non-crystal master clocks for WM8731Mark Brown
Instead of unconditionally enabling the crystal oscillator on the WM8731 only enable it when explicitly selected via set_sysclk(), allowing machine drivers to specify that they drive a clock into MCLK alone. This avoids any conflicts between the oscillator and the external MCLK source and saves power for systems which do not need the oscillator. This should also deliver a small power saving on systems using the crystal since the oscillator will only be enabled when the ADC or DAC is active. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-08-18ASoC: core - fix build warning on x86_64Liam Girdwood
Output size_t type as a "%Zu" to avoid warnings. Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-08-18ASoC: core - fix build warning on x86_64Liam Girdwood
Output size_t type as a "%Zu" to avoid warnings. Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-08-17ASoC: Fix a few more PXA build errorsMark Brown
Dead pxa2xx-pcm.h includes and a missing , Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-08-17ASoC: Multi-component: JZ4740: QI_LB60 board fixesLars-Peter Clausen
This patch contains two small fixes for the sound board driver for the qi_lb60 introduced by the multi-component patches: * Remove unnecessary includes: Those includes where only used to get the definitions for the DAI devices and are thus not needed anymore. * Fix a typo. Signed-off-By: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-08-17ASoC: Remove unused WM8974 private dataMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-08-16ASoC: Fix argument ordering for snd_soc_update_bits() in WM8580Mark Brown
Reported-by: Seungwhan Youn <claude.youn@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-08-16ASoC: Fix WM8580 CLKSEL mask selectionMark Brown
The RX and TX directions were inverted. Reported-by: Seungwhan Youn <claude.youn@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-08-16Merge branch 'for-2.6.36' into for-2.6.37Mark Brown
Fairly simple conflicts, the most serious ones are the i.MX ones which I suspect now need another rename. Conflicts: arch/arm/mach-mx2/clock_imx27.c arch/arm/mach-mx2/devices.c arch/arm/mach-omap2/board-rx51-peripherals.c arch/arm/mach-omap2/board-zoom2.c sound/soc/fsl/mpc5200_dma.c sound/soc/fsl/mpc5200_dma.h sound/soc/fsl/mpc8610_hpcd.c sound/soc/pxa/spitz.c
2010-08-16ASoC: Remove DSP mode support for WM8776Mark Brown
This is not supported by current hardware revisions. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Cc: stable@kernel.org
2010-08-15Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: ALSA: sound/usb/format: silence uninitialized variable warnings MAINTAINERS: Add Ian Lartey as comaintaner for Wolfson devices MAINTAINERS: Make Wolfson entry also cover CODEC drivers ASoC: Only tweak WM8994 chip configuration on devices up to rev D ASoC: Optimise DSP performance for WM8994 ALSA: hda - Fix dynamic ADC change working again ALSA: hda - Restrict PCM parameters per ELD information over HDMI sound: oss: sh_dac_audio.c removed duplicated #include
2010-08-15Merge branch 'for-2.6.36' of ↵Mark Brown
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound-2.6 into for-2.6.37 Trivial overlap with the removal of the local revision variable. Conflicts: sound/soc/codecs/wm8994.c
2010-08-15ASoC: Automatically manage WM8580 DAC OSRMark Brown
The DAC OSR should be selected based on the sample clock ratio. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-08-15ASoC: Fix inverted WM8580 capture mute controlMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-08-15ASoC: Implement BCLK rate selection for WM8580Mark Brown
Drive a minimal supported number of clocks required for the current bit format in master mode. In slave mode this setting has no effect. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-08-15ASoC: Automatically calculate clock ratio for WM8580Mark Brown
Implement set_sysclk() and then rather than assuming 256fs use the supplied value to calculate and configure the clock ratio for the currently used sample rate. As a side effect we also end up implementing clock selection for the ADC path. In order to avoid confusion remove the existing set_clkdiv() based configuration of the clock source for the DAC and update the SMDK64xx driver (which is the only in-tree user of the CODEC). Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-08-15ASoC: Remove unused rate selection bitmasks from WM8580Mark Brown
In the case of the BCLK rate the defines are at best misleading anyway. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-08-15ASoC: Convert WM8580 hw_params to use snd_soc_update_bits()Mark Brown
All the cool kids are using snd_soc_update_bits() these days. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-08-15ASoC: Add a bit of resource unwinding in the S3C IISv4 driverMark Brown
There's much more needed but this'll get us started. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-08-15ASoC: update setting for pxa ssp slave modeHaojian Zhuang
SCFR bit is required to be always set if pxa ssp is in slave mode. This bit indicates clock input to SSPSCLK is only active during data transfers. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-08-15ASoC: fix pxa2xx-pcm.h pathHaojian Zhuang
Since pxa2xx-pcm.h is removed from sound/soc/pxa, we need to update the path in related files. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Tested-by: Ian Lartey <ian@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-08-15ASoC: multi-component: Fix reference to moved header file, which was unused ↵Ian Lartey
anyway. Removed #include of pxa2xx-pcm.h Signed-off-by: Ian Lartey <ian@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-08-15ASoC: Remove redundant device name from debugfs directoryMark Brown
Since the core now includes deduplication in the name of CODEC devices there's no need to add extra for the debugfs directory name. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-08-15ASoC: Set up debugfs only once per CODECMark Brown
Since the debugfs directory is current per CODEC we should only init it when the CODEC is initialised, otherwise we end up with errors being generated when an attempt is made to add duplicate debugfs entries. Since most of this stuff is actually for the card we should refactor but this can come later. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-08-15Merge branch 'fix/asoc' into for-linusTakashi Iwai
2010-08-13ASoC: Only tweak WM8994 chip configuration on devices up to rev DMark Brown
Any subsequent revisions will have these configuration changes applied by default. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-08-13ASoC: Optimise DSP performance for WM8994Mark Brown
Change the chip defaults to optimise performance of some of the DSP functionality. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-08-12Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: ASoC: add AD1980 obsolete information ASoC: register cache should be 1 byte aligned for 1 byte long register ALSA: hda - Adding support for new IDT 92HD87XX codecs ASoC: Fix inverted mute controls for WM8580 ALSA: HDA: Use model=auto for LG R510 ALSA: hda - Update model entries in HD-Audio-Models.txt ALSA: hda: document VIA models ALSA: hda - patch_nvhdmi.c: Add missing codec IDs, unify names ALSA: hda - add support for Conexant CX20584 ALSA: hda - New snd-hda-intel model/pin config for hp dv7-4000 ALSA: hda - Fix missing stream for second ADC on Realtek ALC260 HDA codec ALSA: hda - Make converter setups sticky ALSA: hda - Add support for Acer ZGA ALC271 (1025:047c) sound/oss: Adjust confusing if indentation sound: oss: au1550_ac97.c removed duplicated #include ASoC: Fix for changed Eureka Kconfig symbol names
2010-08-12Merge branch 'next-devicetree' of git://git.secretlab.ca/git/linux-2.6Linus Torvalds
* 'next-devicetree' of git://git.secretlab.ca/git/linux-2.6: mmc_spi: Fix unterminated of_match_table of/sparc: fix build regression from of_device changes of/device: Replace struct of_device with struct platform_device
generated by cgit v1.2.3 (git 2.0.4) at 2024-05-14 02:20:40 +0000