summaryrefslogtreecommitdiff
path: root/sound
AgeCommit message (Collapse)Author
2014-11-21ALSA: usb-audio: Fix memory leak in FTU quirkTakashi Iwai
commit 1a290581ded60e87276741f8ca97b161d2b226fc upstream. M-audio FastTrack Ultra quirk doesn't release the kzalloc'ed memory. This patch adds the private_free callback to release it properly. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-21ALSA: hda - Add mute LED control for Lenovo Ideapad Z560Takashi Iwai
commit 3542aed7480925eb859f7ce101982209cc19a126 upstream. Lenovo Ideapad Z560 has a mute LED that is controlled via EAPD pin 0x1b on CX20585 codec. (EAPD bit on corresponds to mute LED on.) The machine doesn't need other EAPD, so the fixup concentrates on controlling EAPD 0x1b following the vmaster state (but inversely). Bugzilla: https://bugzilla.novell.com/show_bug.cgi?id=665315 Reported-by: Szymon Kowalczyk <fazerxlo@o2.pl> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-14ALSA: hda - fix mute led problem for three HP laptopsHui Wang
commit c922c4e87b9b5a3b50d4d17b96f189121430f511 upstream. Without the fix, the mute led can't work on these three machines. After apply this fix, these three machines will fall back on the led control quirk as below, and through testing, the mute led works very well. PIN_QUIRK(0x10ec0282, 0x103c, "HP", ALC269_FIXUP_HP_LINE1_MIC1_LED, ALC282_STANDARD_PINS, {0x12, 0x90a60140}, ... BugLink: https://bugs.launchpad.net/bugs/1389497 Tested-by: TieFu Chen <tienfu.chen@canonical.com> Cc: Kailang Yang <kailang@realtek.com> Signed-off-by: Hui Wang <hui.wang@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-14ALSA: usb-audio: Fix device_del() sysfs warnings at disconnectTakashi Iwai
commit 0725dda207e95ff25f1aa01432250323e0ec49d6 upstream. Some USB-audio devices show weird sysfs warnings at disconnecting the devices, e.g. usb 1-3: USB disconnect, device number 3 ------------[ cut here ]------------ WARNING: CPU: 0 PID: 973 at fs/sysfs/group.c:216 device_del+0x39/0x180() sysfs group ffffffff8183df40 not found for kobject 'midiC1D0' Call Trace: [<ffffffff814a3e38>] ? dump_stack+0x49/0x71 [<ffffffff8103cb72>] ? warn_slowpath_common+0x82/0xb0 [<ffffffff8103cc55>] ? warn_slowpath_fmt+0x45/0x50 [<ffffffff813521e9>] ? device_del+0x39/0x180 [<ffffffff81352339>] ? device_unregister+0x9/0x20 [<ffffffff81352384>] ? device_destroy+0x34/0x40 [<ffffffffa00ba29f>] ? snd_unregister_device+0x7f/0xd0 [snd] [<ffffffffa025124e>] ? snd_rawmidi_dev_disconnect+0xce/0x100 [snd_rawmidi] [<ffffffffa00c0192>] ? snd_device_disconnect+0x62/0x90 [snd] [<ffffffffa00c025c>] ? snd_device_disconnect_all+0x3c/0x60 [snd] [<ffffffffa00bb574>] ? snd_card_disconnect+0x124/0x1a0 [snd] [<ffffffffa02e54e8>] ? usb_audio_disconnect+0x88/0x1c0 [snd_usb_audio] [<ffffffffa015260e>] ? usb_unbind_interface+0x5e/0x1b0 [usbcore] [<ffffffff813553e9>] ? __device_release_driver+0x79/0xf0 [<ffffffff81355485>] ? device_release_driver+0x25/0x40 [<ffffffff81354e11>] ? bus_remove_device+0xf1/0x130 [<ffffffff813522b9>] ? device_del+0x109/0x180 [<ffffffffa01501d5>] ? usb_disable_device+0x95/0x1f0 [usbcore] [<ffffffffa014634f>] ? usb_disconnect+0x8f/0x190 [usbcore] [<ffffffffa0149179>] ? hub_thread+0x539/0x13a0 [usbcore] [<ffffffff810669f5>] ? sched_clock_local+0x15/0x80 [<ffffffff81066c98>] ? sched_clock_cpu+0xb8/0xd0 [<ffffffff81070730>] ? bit_waitqueue+0xb0/0xb0 [<ffffffffa0148c40>] ? usb_port_resume+0x430/0x430 [usbcore] [<ffffffffa0148c40>] ? usb_port_resume+0x430/0x430 [usbcore] [<ffffffff8105973e>] ? kthread+0xce/0xf0 [<ffffffff81059670>] ? kthread_create_on_node+0x1c0/0x1c0 [<ffffffff814a8b7c>] ? ret_from_fork+0x7c/0xb0 [<ffffffff81059670>] ? kthread_create_on_node+0x1c0/0x1c0 ---[ end trace 40b1928d1136b91e ]--- This comes from the fact that usb-audio driver may receive the disconnect callback multiple times, per each usb interface. When a device has both audio and midi interfaces, it gets called twice, and currently the driver tries to release resources at the last call. At this point, the first parent interface has been already deleted, thus deleting a child of the first parent hits such a warning. For fixing this problem, we need to call snd_card_disconnect() and cancel pending operations at the very first disconnect while the release of the whole objects waits until the last disconnect call. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=80931 Reported-and-tested-by: Tomas Gayoso <tgayoso@gmail.com> Reported-and-tested-by: Chris J Arges <chris.j.arges@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-14ALSA: pcm: Zero-clear reserved fields of PCM status ioctl in compat modeTakashi Iwai
commit 317168d0c766defd14b3d0e9c2c4a9a258b803ee upstream. In compat mode, we copy each field of snd_pcm_status struct but don't touch the reserved fields, and this leaves uninitialized values there. Meanwhile the native ioctl does zero-clear the whole structure, so we should follow the same rule in compat mode, too. Reported-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-14ALSA: bebob: Uninitialized id returned by saffirepro_both_clk_src_getChristian Vogel
commit d1d0b6b668818571122d30d68a0b3f768bd83a52 upstream. snd_bebob_stream_check_internal_clock() may get an id from saffirepro_both_clk_src_get (via clk_src->get()) that was uninitialized. a) make logic in saffirepro_both_clk_src_get explicit b) test if id used in snd_bebob_stream_check_internal_clock matches array size [fixed missing signed prefix to *_maps[] by tiwai] Signed-off-by: Christian Vogel <vogelchr@vogel.cx> Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-14ALSA: hda - Add workaround for CMI8888 snoop behaviorTakashi Iwai
commit 3b70bdba2fcb374a2235a56ab73334348d819579 upstream. CMI8888 shows the stuttering playback when the snooping is disabled on the audio buffer. Meanwhile, we've got reports that CORB/RIRB doesn't work in the snooped mode. So, as a compromise, disable the snoop only for CORB/RIRB and enable the snoop for the stream buffers. The resultant patch became a bit ugly, unfortunately, but we still can live with it. Reported-and-tested-by: Geoffrey McRae <geoff@spacevs.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-14ASoC: adau1761: Fix input PGA volumeLars-Peter Clausen
commit 3b283f0893f55cb79e4507e5ec34e49c17d0a787 upstream. For the input PGA to work correctly the ALC clock needs to be active. Otherwise volume changes are not applied. Fixes: dab464b60b2 ("ASoC: Add ADAU1361/ADAU1761 audio CODEC support") Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-14ASoC: Intel: HSW/BDW only support S16 and S24 formats.Liam Girdwood
commit 2ccf3bd4f8b120936cdfc796baf40c5d3dfab68d upstream. Fix driver with correct formats. Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-14ASoC: tlv320aic3x: fix PLL D configurationDmitry Lavnikevich
commit 31d9f8faf9a54c851e835af489c82f45105a442f upstream. Current caching implementation during regcache_sync() call bypasses all register writes of values that are already known as default (regmap reg_defaults). Same time in TLV320AIC3x codecs register 5 (AIC3X_PLL_PROGC_REG) write should be immediately followed by register 6 write (AIC3X_PLL_PROGD_REG) even if it was not changed. Otherwise both registers will not be written. This brings to issue that appears particulary in case of 44.1kHz playback with 19.2MHz master clock. In this case AIC3X_PLL_PROGC_REG is 0x6e while AIC3X_PLL_PROGD_REG is 0x0 (same as register default). Thus AIC3X_PLL_PROGC_REG also remains not written and we get wrong playback speed. In this patch snd_soc_read() is used to get cached pll values and snd_soc_write() (unlike regcache_sync() this function doesn't bypasses hardware default values) to write them to registers. Signed-off-by: Dmitry Lavnikevich <d.lavnikevich@sam-solutions.com> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-14ASoC: soc-pcm: fix sig_bits determination in soc_pcm_apply_msb()Daniel Mack
commit 5e63dfccf34d4dbf21429c4919f33c028ff49991 upstream. In the SNDRV_PCM_STREAM_CAPTURE branch in soc_pcm_apply_msb(), look at sig_bits of the capture stream, not the playback one. Spotted by coverity. Signed-off-by: Daniel Mack <daniel@zonque.org> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-14ASoC: soc-dapm: fix use after freeDaniel Mack
commit e5092c96c9c28f4d12811edcd02ca8eec16e748e upstream. Coverity spotted the following possible use-after-free condition in dapm_create_or_share_mixmux_kcontrol(): If kcontrol is NULL, and (wname_in_long_name && kcname_in_long_name) validates to true, 'name' will be set to an allocated string, and be freed a few lines later via the 'long_name' alias. 'name', however, is used by dev_err() in case snd_ctl_add() fails. Fix this by adding a jump label that frees 'long_name' at the end of the function. Signed-off-by: Daniel Mack <daniel@zonque.org> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-14ASoC: core: fix use after free in snd_soc_remove_platform()Daniel Mack
commit decc27b01d584c985c231e73d3b493de6ec07af8 upstream. Coverity spotted an use-after-free condition in snd_soc_remove_platform(). Fix this by moving snd_soc_component_cleanup() after the debug print statement which uses the component's string. Signed-off-by: Daniel Mack <daniel@zonque.org> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-10-30ALSA: hda - Add missing terminating entry to SND_HDA_PIN_QUIRK macroDavid Henningsson
commit fb54a645b2739fb196446ffbbbe3f3589d117b55 upstream. Without this terminating entry, the pin matching would continue across random memory until a zero or a non-matching entry was found. The result being that in some cases, the pin quirk would not be applied correctly. Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-10-30ALSA: hda - Fix inverted LED gpio setup for Lenovo IdeapadTakashi Iwai
commit b1974f965a506c131b60cd3e483340884e831920 upstream. We implemented in a wrong way for mute LED on Lenovo Ideapad; the bit must be flipped. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=16373 Fixes: 3e887f379d8a ('ALSA: hda - Add mute LED support to Lenovo Ideapad') Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-10-30ALSA: hda - hdmi: Fix missing ELD change event on plug/unplugAnssi Hannula
commit 6acce400d9daf1353fbf497302670c90a3205e1d upstream. The ELD ALSA control change event is sent by hdmi_present_sense() when eld_changed is true. Currently, it is only true when the ELD buffer contents have been modified. However, the user-visible ELD controls also change to a zero-length value and back when eld_valid is unset/set, and no event is currently sent in such cases (such as when unplugging or replugging a sink). Fix the code to always set eld_changed if eld_valid value is changed, and therefore to always send the change event when the user-visible value changes. Signed-off-by: Anssi Hannula <anssi.hannula@iki.fi> Cc: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-10-30ALSA: usb-audio: Add support for Steinberg UR22 USB interfaceVlad Catoi
commit f0b127fbfdc8756eba7437ab668f3169280bd358 upstream. Adding support for Steinberg UR22 USB interface via quirks table patch See Ubuntu bug report: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1317244 Also see threads: http://linux-audio.4202.n7.nabble.com/Support-for-Steinberg-UR22-Yamaha-USB-chipset-0499-1509-tc82888.html#a82917 http://www.steinberg.net/forums/viewtopic.php?t=62290 Tested by at least 4 people judging by the threads. Did not test MIDI interface, but audio output and capture both are functional. Built 3.17 kernel with this driver on Ubuntu 14.04 & tested with mpg123 Patch applied to 3.13 Ubuntu kernel works well enough for daily use. Signed-off-by: Vlad Catoi <vladcatoi@gmail.com> Acked-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-10-30ALSA: ALC283 codec - Avoid pop noise on headphones during suspend/resumeHarsha Priya
commit b450b17c156e264bc44a198046d3ebaaef5a041d upstream. This patch sets the headphones mode to default before suspending which helps avoid the pop noise on headphones Signed-off-by: Harsha Priya <harshapriya.n@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-10-30ALSA: emu10k1: Fix deadlock in synth voice lookupTakashi Iwai
commit 95926035b187cc9fee6fb61385b7da9c28123f74 upstream. The emu10k1 voice allocator takes voice_lock spinlock. When there is no empty stream available, it tries to release a voice used by synth, and calls get_synth_voice. The callback function, snd_emu10k1_synth_get_voice(), however, also takes the voice_lock, thus it deadlocks. The fix is simply removing the voice_lock holds in snd_emu10k1_synth_get_voice(), as this is always called in the spinlock context. Reported-and-tested-by: Arthur Marsh <arthur.marsh@internode.on.net> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-10-30ALSA: bebob: Fix failure to detect source of clock for Terratec Phase 88Takashi Sakamoto
commit 3f4032861cfbff0b9134bf94c5c92e2146d1f068 upstream. This patch fixes a failure to open PCM device with -ENOSYS in Terratec Phase 88. Terratec Phase 88 has two Selector Function Blocks of AVC Audio subunit to switch source of clock. One is to switch internal/external for the source and another is to switch word/spdif for the external clock. The IDs for these Selector Function Blocks are 9 and 8. But in current implementation they're 0 and 0. Reported-by: András Murányi <muranyia@gmail.com> Tested-by: András Murányi <muranyia@gmail.com> Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-10-30ALSA: pcm: use the same dma mmap codepath both for arm and arm64Anatol Pomozov
commit a011e213f3700233ed2a676f1ef0a74a052d7162 upstream. This avoids following kernel crash when try to playback on arm64 [ 107.497203] [<ffffffc00046b310>] snd_pcm_mmap_data_fault+0x90/0xd4 [ 107.503405] [<ffffffc0001541ac>] __do_fault+0xb0/0x498 [ 107.508565] [<ffffffc0001576a0>] handle_mm_fault+0x224/0x7b0 [ 107.514246] [<ffffffc000092640>] do_page_fault+0x11c/0x310 [ 107.519738] [<ffffffc000081100>] do_mem_abort+0x38/0x98 Tested: backported to 3.14 and tried to playback on arm64 machine Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-10-01Merge tag 'asoc-v3.17-rc7' of ↵Takashi Iwai
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Fix SSM2602 device identification Another fix for v3.17, fixing device identification after the split out of the I2C and SPI code.
2014-09-30ASoC: ssm2602: do not hardcode type to SSM2602Stefan Kristiansson
The correct type (SSM2602/SSM2603/SSM2604) is passed down from the ssm2602_spi_probe()/ssm2602_spi_probe() functions, so use that instead of hardcoding it to SSM2602 in ssm2602_probe(). Fixes: c924dc68f737 ("ASoC: ssm2602: Split SPI and I2C code into different modules") Signed-off-by: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi> Signed-off-by: Mark Brown <broonie@kernel.org> Acked-by: Lars-Peter Clausen <lars@metafoo.de> Cc: stable@vger.kernel.org
2014-09-30Merge tag 'asoc-v3.17-rc6' of ↵Takashi Iwai
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Fixes for v3.17 A few small driver specific fixes and a couple of error handling fixes in the core.
2014-09-28Merge remote-tracking branches 'asoc/fix/atmel', 'asoc/fix/compress', ↵Mark Brown
'asoc/fix/core', 'asoc/fix/fsl-ssi' and 'asoc/fix/rt286' into asoc-linus
2014-09-28ASoC: core: fix possible ZERO_SIZE_PTR pointer dereferencing error.Xiubo Li
Since we cannot make sure the 'params->num_regs' will always be none zero here, and then if it equals to zero, the kmemdup() will return ZERO_SIZE_PTR, which equals to ((void *)16). So this patch fix this with just doing the zero check before calling kmemdup(). Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org
2014-09-26ASoC: rt286: Fix sync functionBard Liao
We try to write index registers into cache when we write an index register, but we change the reg value before updating the cache. As a result, the cache is never be updated. This patch will fix this issue. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org
2014-09-26ASoC: rt286: Correct default valueBard Liao
This patch corrects some incorrect default value in the cache. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org
2014-09-24ASoC: soc-compress: fix double unlock of fe card mutexQiao Zhou
Fix double unlock of fe card mutex introduced by patch 8f70e515a8bb "ASoC: soc-pcm: fix dpcm_path_get error handling" The first unlock is at line 106, and the unlock is at line 149. we should remove the first unlock. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Qiao Zhou <zhouqiao@marvell.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-09-22ASoC: fsl_ssi: fix kernel panic in probe functionMichael Trimarchi
code can raise a panic when the ssi_private->pdev is null [...] /* * If codec-handle property is missing from SSI node, we assume * that the machine driver uses new binding which does not require * SSI driver to trigger machine driver's probe. */ if (!of_get_property(np, "codec-handle", NULL)) goto done; [...] ssi_private->pdev = platform_device_register_data(&pdev->dev, name, 0, NULL, 0); [...] done: if (ssi_private->dai_fmt) _fsl_ssi_set_dai_fmt(ssi_private, ssi_private->dai_fmt); Proposal was to not use ssi_private->pdev->dev here but adding a new parameter of *dev pointer to this _set_dai_fmt() -- passing pdev->dev in probe() and cpu_dai->dev in fsl_ssi_set_dai_fmt(). Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com> Reported-by: Jean-Michel Hautbois <jean-michel.hautbois@vodalys.com> Acked-by: Nicolin Chen <nicoleotsuka@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-09-22ALSA: snd-usb-caiaq: Fix LED commands for Kore controllerDaniel Mack
KoreController and KoreController2 need an EP1_CMD_DIMM_LEDS command to set their LEDs, not EP1_CMD_WRITE_IO. Signed-off-by: Daniel Mack <daniel@zonque.org> Reported-and-tested-by: Brad Wilson <brad.wilson.00@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-09-22ALSA: pcm: fix fifo_size frame calculationClemens Ladisch
The calculated frame size was wrong because snd_pcm_format_physical_width() actually returns the number of bits, not bytes. Use snd_pcm_format_size() instead, which not only returns bytes, but also simplifies the calculation. Fixes: 8bea869c5e56 ("ALSA: PCM midlevel: improve fifo_size handling") Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-09-19ALSA: hda - Add fixup model name lookup for Lemote A1205Huacai Chen
Lemote A1004 is already added in commit a2dd933d01f (ALSA: hda - Add fixup name lookup for CX5051 and 5066 codecs), but Lemote A1205 has missing. Signed-off-by: Huacai Chen <chenhc@lemote.com> Cc: <stable@vger.kernel.org> # 3.15+ Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-09-16Merge tag 'asoc-v3.17-rc4' of ↵Takashi Iwai
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Fixes for v3.17 This is mostly driver fixes, the biggest one being the tlv320aic31xx which is relatively large but simple and device specific. There's a small fix in the error handling in DPCM too which is relatively minor error handling fix.
2014-09-15Merge remote-tracking branches 'asoc/fix/cs4265', 'asoc/fix/davinci', ↵Mark Brown
'asoc/fix/rockchip', 'asoc/fix/samsung' and 'asoc/fix/tlv320aic31xx' into asoc-linus
2014-09-15Merge remote-tracking branch 'asoc/fix/pcm' into asoc-linusMark Brown
2014-09-15Merge remote-tracking branch 'asoc/fix/core' into asoc-linusMark Brown
2014-09-13ASoC: rockchip-i2s: fix registers' property of rockchip i2s controllerJianqun
Reference rockchip I2S controller TRM, modify some registers' property I2S_FIFOLR: read / write, but not volatile, not precious I2S_INTSR: read / write I2S_CLR: volatile, register value will be cleared by read Test on RK3288 with max98090. Signed-off-by: Jianqun Xu <jay.xu@rock-chips.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-09-13ASoC: rockchip-i2s: fix master mode set bit errorJianqun
Fix error format set to I2S master or slave mode. Test on RK3288 board with max98090. Signed-off-by: Jianqun Xu <jay.xu@rock-chips.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-09-11ASoC: cs4265: Fix register address to set the proper data type.Paul Handrigan
The SPDIF control register must be written to set the data type in hw_params not the ADC control register. Signed-off-by: Paul Handrigan <Paul.Handrigan@cirrus.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org
2014-09-11ALSA: hda - Fix invalid pin powermap without jack detectionTakashi Iwai
When a driver is set up without the jack detection explicitly (either by passing a model option or via a specific fixup), the pin powermap of IDT/STAC codecs is set up wrongly, resulting in the silence output. It's because of a logic failure in stac_init_power_map(). It tries to avoid creating a callback for the pins that have other auto-hp and auto-mic callbacks, but the check is done in a wrong way at a wrong time. The stac_init_power_map() should be called after creating other jack detection ctls, and the jack callback should be created only for jack-detectable widgets. This patch fixes the check in stac_init_power_map() and its callee at the right place, after snd_hda_gen_build_controls(). Reported-by: Adam Richter <adam_richter2004@yahoo.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-09-10ASoC: soc-pcm: fix dpcm_path_get error handlingQiao Zhou
dpcm_path_get may return -ENOMEM when allocating memory for list fails. We should not keep processing path or start up dpcm dai in this case. Signed-off-by: Qiao Zhou <zhouqiao@marvell.com> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-09-09ASoC: samsung-i2s: Check secondary DAI exists before referencingCharles Keepax
In a couple of places the driver is missing a check to ensure there is a secondary DAI before it de-references the pointer to it, causing a null pointer de-reference. This patch adds a check to avoid this. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mark Brown <broonie@linaro.org> Cc: stable@vger.kernel.org
2014-09-09ASoC: Update email id of the authorRajeev Kumar
I moved from ST Microelectronics and so updating email-id to personal one. Signed-off-by: Rajeev Kumar <rajeevkumar.linux@gmail.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-09-06ASoC: dwc: Update email id of the authorRajeev Kumar
I moved from ST Microelectronics and the email-id no longer exists. Update email-id to personal one, Signed-off-by: Rajeev Kumar <rajeevkumar.linux@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-09-04ASoC: davinci-mcasp: Correct rx format unit configurationPeter Ujfalusi
In case of capture we should not use rotation. The reverse and mask is enough to get the data align correctly from the bus to MCU: Format data from bus after reverse (XRBUF) S16_LE: |LSB|MSB|xxx|xxx| |xxx|xxx|MSB|LSB| S24_3LE: |LSB|DAT|MSB|xxx| |xxx|MSB|DAT|LSB| S24_LE: |LSB|DAT|MSB|xxx| |xxx|MSB|DAT|LSB| S32_LE: |LSB|DAT|DAT|MSB| |MSB|DAT|DAT|LSB| With this patch all supported formats will work for playback and capture. Reported-by: Jyri Sarha <jsarha@ti.com> (broken S24_3LE capture) Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org
2014-09-03Merge tag 'asoc-v3.17-rc3' of ↵Takashi Iwai
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Fixes for v3.17 A few more driver specific fixes on top of the currently pending fixes (which are already in your tree but not Linus').
2014-09-03ASoC: tlv320aic31xx: Fix 24bit samples with I2S format and 12MHz mclkJyri Sarha
I2S format requires bitclock to have an exact amount of cycles in a frame for audio to work cleanly. With dsp formats that is not so important. Updates aic31xx_setup_pll() to look for a line in aic31xx_divs table that produces the best match for the bitclock and adds lines to aic31xx_divs for 12MHz mclk and 24bit samples. Signed-off-by: Jyri Sarha <jsarha@ti.com> Tested-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-09-02Merge remote-tracking branches 'asoc/fix/axi', 'asoc/fix/cs4265', ↵Mark Brown
'asoc/fix/da732x', 'asoc/fix/omap', 'asoc/fix/rsnd', 'asoc/fix/rt5640', 'asoc/fix/rt5677', 'asoc/fix/simple' and 'asoc/fix/tegra' into asoc-linus
2014-09-02Merge remote-tracking branch 'asoc/fix/core' into asoc-linusMark Brown
generated by cgit v1.2.3 (git 2.0.4) at 2024-06-18 06:48:30 +0000