summaryrefslogtreecommitdiff
path: root/tools/lguest
AgeCommit message (Collapse)Author
2015-08-26tools/lguest: Clean up include dirRusty Russell
It contains a symlinked header we use; ignore it and clean it up on 'make clean'. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-08-26tools/lguest: Fix redefinition of struct virtio_pci_cfg_capRusty Russell
Ours uses a u32 for the data, since we ensure it's always aligned and it's x86 so it doesn't matter anyway. lguest.c:128:8: error: redefinition of ‘struct virtio_pci_cfg_cap’ Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Fixes: 3121bb023e2db ("virtio: define virtio_pci_cfg_cap in header.") Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-02-13tools/lguest: don't use legacy definitions for net device in example launcher.Rusty Russell
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-02-13tools/lguest: use common error macros in the example launcher.Rusty Russell
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-02-13tools/lguest: give virtqueues names for better error messagesRusty Russell
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-02-13tools/lguest: more documentation and checking of virtio 1.0 compliance.Rusty Russell
This is from all the non-PCI parts of the spec. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-02-13tools/lguest: don't start devices until DRIVER_OK status set.Rusty Russell
We were activating them with the virtqueues, and that's not allowed. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-02-13tools/lguest: handle indirect partway through chain.Rusty Russell
Linux doesn't generate these, but it's perfectly valid according to a close reading of the spec. I opened virtio spec bug VIRTIO-134 to make this clearer there, too. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-02-13tools/lguest: insert driver references from the 1.0 spec (4.1 Virtio Over PCI)Rusty Russell
As a demonstration, the lguest launcher is pretty strict, trying to catch badly behaved drivers. Document this precisely. A good implementation would *NOT* crash the guest when these happened! Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-02-13tools/lguest: insert device references from the 1.0 spec (4.1 Virtio Over PCI)Rusty Russell
There are some (optional) parts we don't implement, but this quotes all the device requirements from the spec (csd 03, but it should be the same across all released versions). Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-02-13tools/lguest: rename virtio_pci_cfg_cap field to match spec.Rusty Russell
The next patch will insert many quotes from the virtio 1.0 spec; they make most sense if we copy the spec. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-02-13tools/lguest: fix features_accepted logic in example launcher.Rusty Russell
We were clearing the lower bits when setting the upper bits. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-02-13tools/lguest: handle device reset correctly in example launcher.Rusty Russell
The example launcher doesn't reset the queue_enable like the spec says we have to. Plus, we should reset the size in case they negotiated a different (smaller) one. This is easy to test by unloading and reloading a virtio module. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-02-11lguest: remove NOTIFY facility from demonstration launcher.Rusty Russell
This was only used for early console, now we can get rid of it altogether. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-02-11lguest: always put console in PCI slot #1.Rusty Russell
This simplifies the early probe. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-02-11lguest: support backdoor window.Rusty Russell
The VIRTIO_PCI_CAP_PCI_CFG in the PCI virtio 1.0 spec allows access to the BAR registers without mapping them. This is a compulsory feature, and we implement it here. There are some subtleties involving access widths which we should note: 4.1.4.7.1 Device Requirements: PCI configuration access capability ... Upon detecting driver write access to pci_cfg_data, the device MUST execute a write access at offset cap.offset at BAR selected by cap.bar using the first cap.length bytes from pci_cfg_data. Upon detecting driver read access to pci_cfg_data, the device MUST execute a read access of length cap.length at offset cap.offset at BAR selected by cap.bar and store the first cap.length bytes in pci_cfg_data. So, for a write, we copy into the pci_cfg_data window, then write from there out to the BAR. This works correctly if cap.length != width of write. Similarly, for a read, we read into window from the BAR then read the value from there. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-02-11lguest: support emerg_wr in console device in example launcher.Rusty Russell
This is a magic register which causes a character to be outputted: it can be used even before the device is configured. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-02-11lguest: remove support for lguest bus in demonstration launcher.Rusty Russell
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-02-11lguest: define VIRTIO_CONFIG_NO_LEGACY in example launcher.Rusty Russell
We only support virtio 1.0 now Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-02-11lguest: Convert console device to virtio 1.0 PCI.Rusty Russell
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-02-11lguest: Convert entropy device to virtio 1.0 PCI.Rusty Russell
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-02-11lguest: Convert net device to virtio 1.0 PCI.Rusty Russell
The only real change here (other than using the PCI bus) is that we didn't negotiate VIRTIO_NET_F_MRG_RXBUF before, so the format of the packet header changed with virtio 1.0; we need TUNSETVNETHDRSZ on the tun fd to tell it about the extra two bytes. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-02-11lguest: Convert block device to virtio 1.0 PCI.Rusty Russell
We remove SCSI support (which was removed for 1.0) and VIRTIO_BLK_F_FLUSH feature flag (removed too, since it's compulsory for 1.0). The rest is mainly mechanical. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-02-11lguest: add a dummy PCI host bridge.Rusty Russell
Otherwise Linux fails to find the bus. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-02-11lguest: fix failure to find linux/virtio_types.hRusty Russell
We want to use the local kernel headers, but -I../../include/uapi leads us into a world of hurt. Instead we create a dummy include/ dir with symlinks. If we just use #include "../../include/uapi/linux/virtio_blk.h" we get: ../../include/uapi/linux/virtio_blk.h:31:32: fatal error: linux/virtio_types.h: No such file or directory #include <linux/virtio_types.h> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-02-11lguest: implement virtio-PCI MMIO accesses.Rusty Russell
For each device, We need to include the vendor capabilities to demark where virtio common, notification and ISR regions are (we put them all in BAR0). We need to handle the switching of the virtqueues using the accessors. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-02-11lguest: add PCI config space emulation to example launcher.Rusty Russell
This handles ioport 0xCF8 and 0xCFC accesses, which are used to read/write PCI device config space. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-02-11lguest: decode mmio accesses for PCI in example launcher.Rusty Russell
We don't do anything with them yet (emulate_mmio_write and emulate_mmio_read are stubs), but we decode the instructions and search for the device they're hitting. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-02-11lguest: add MMIO region allocator in example launcher.Rusty Russell
This is where we point our PCI BARs, so that we can intercept MMIO accesses. We tell the kernel about it so any faults in this area are directed to us. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-02-11lguest: add iomem region, where guest page faults get sent to userspace.Rusty Russell
This lets us implement PCI. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-02-11lguest: suppress PS/2 keyboard polling.Rusty Russell
While hacking on getting I/O out to the lguest launcher, I noticed that returning 0xFF for the PS/2 keyboard status made it spin for a while thinking there was a key pending. Fix this by returning 1 instead of 0xFF. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-02-11lguest: send trap 13 through to userspace.Rusty Russell
We copy 7 bytes at eip for userspace's instruction decode; we have to carefully handle the case where eip is at the end of a page. We can't leave this to userspace since kernel has all the page table decode logic. The decode logic moves to userspace, basically unchanged. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-02-11lguest: write more information to userspace about pending traps.Rusty Russell
This is preparation for userspace handling MMIO and ioport accesses. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-02-11lguest: have --rng read from /dev/urandom not /dev/random.Rusty Russell
Theoretical debates aside, now it boots. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2013-07-15tools/lguest: offer VIRTIO_F_ANY_LAYOUT for net device.Rusty Russell
We don't care about layout, so advertise that fact. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2013-07-04lguest: fix example launcher compilation for broken glibc headers.Rusty Russell
Somehow a naked u16 slipped into the glibc headers on my Ubuntu machine (i386 2.17-0ubuntu5), breaking compile: In file included from lguest.c:46:0: /usr/include/linux/virtio_net.h:188:2: error: unknown type name ‘u16’ We use the kernel-style types anyway, just define them before the includes. Also remove the advice on adding missing headers: that no longer works. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2013-07-02tools/lguest: real barriers.Rusty Russell
Lguest guests are UP, but the host is probably SMP, so real barriers are required in case the device thread and the guest are on different CPUs. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2013-07-02tools/lguest: fix missing rmb().Rusty Russell
The virtio spec was missing a barrier in example code, so I went back to look at the lguest code. Indeed, we need one. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2013-03-07lguest: fix paths in commentsWanlong Gao
After commit 07fe997, lguest tool has already moved from Documentation/virtual/lguest/ to tools/lguest/. Signed-off-by: Wanlong Gao <gaowanlong@cn.fujitsu.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2013-01-11tools/lguest: remove depends on CONFIG_EXPERIMENTALKees Cook
The CONFIG_EXPERIMENTAL config item has not carried much meaning for a while now and is almost always enabled by default. As agreed during the Linux kernel summit, remove it from any "depends on" lines in Kconfigs. CC: Rusty Russell <rusty@rustcorp.com.au> CC: Davidlohr Bueso <dave@gnu.org> Signed-off-by: Kees Cook <keescook@chromium.org> Acked-by: Rusty Russell <rusty@rustcorp.com.au>
2012-10-22lguest: fix block request handling in example launcher.Rusty Russell
virtio requests are scatter-gather-style descriptors, but no assumptions should be made about the layout. lguest was lazy here, but saved by the fact that the network device hands all requests to tun (which does it correctly) and console and random devices simply use readv and writev. Block devices, however, are broken: we convert to iovecs internally, just make sure we handle the correctly. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2012-10-04lguest: fix occasional crash in example launcher.Rusty Russell
We usually got away with ->next on the final entry being NULL, but it finally bit me. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Cc: stable@kernel.org
2012-01-12lguest: move the lguest tool to the tools directoryDavidlohr Bueso
This is a better location instead of having it in Documentation. Signed-off-by: Davidlohr Bueso <dave@gnu.org> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> (fixed compile)