From 542a8d98f16fd345af690a8a563c5b8218cb88a3 Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Thu, 9 Jun 2016 21:43:13 +0200 Subject: ARM: dts: mxs: Add SanDisk Sansa Fuze+ support Add support for this small MP3 player based on STMP3780 (rev.3). Currently supported are both external microSD and internal SD-NAND bridge, PWM and USB gadget. Signed-off-by: Marek Vasut Cc: Fabio Estevam Signed-off-by: Shawn Guo --- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/imx23-sansa.dts | 207 ++++++++++++++++++++++++++++++++++++++ 2 files changed, 208 insertions(+) create mode 100644 arch/arm/boot/dts/imx23-sansa.dts diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 123593428464..5ead7871f411 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -416,6 +416,7 @@ dtb-$(CONFIG_SOC_VF610) += \ dtb-$(CONFIG_ARCH_MXS) += \ imx23-evk.dtb \ imx23-olinuxino.dtb \ + imx23-sansa.dtb \ imx23-stmp378x_devb.dtb \ imx23-xfi3.dtb \ imx28-apf28.dtb \ diff --git a/arch/arm/boot/dts/imx23-sansa.dts b/arch/arm/boot/dts/imx23-sansa.dts new file mode 100644 index 000000000000..4ec32f4c7885 --- /dev/null +++ b/arch/arm/boot/dts/imx23-sansa.dts @@ -0,0 +1,207 @@ +/* + * Copyright (C) 2013-2016 Marek Vasut + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + * + */ + +/dts-v1/; +#include "imx23.dtsi" + +/ { + model = "SanDisk Sansa Fuze+"; + compatible = "sandisk,sansa_fuze_plus", "fsl,imx23"; + + memory { + reg = <0x40000000 0x04000000>; + }; + + apb@80000000 { + apbh@80000000 { + ssp0: ssp@80010000 { + compatible = "fsl,imx23-mmc"; + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_pins_fixup>; + bus-width = <4>; + vmmc-supply = <®_vddio_sd0>; + cd-inverted; + status = "okay"; + }; + + ssp1: ssp@80034000 { + compatible = "fsl,imx23-mmc"; + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_8bit_pins_a>; + bus-width = <8>; + vmmc-supply = <®_vddio_sd1>; + non-removable; + status = "okay"; + }; + + pinctrl@80018000 { + pinctrl-names = "default"; + pinctrl-0 = <&hog_pins_a>; + + hog_pins_a: hog@0 { + reg = <0>; + fsl,pinmux-ids = < + MX23_PAD_GPMI_D08__GPIO_0_8 + MX23_PAD_PWM3__GPIO_1_29 + MX23_PAD_AUART1_RTS__GPIO_0_27 + MX23_PAD_AUART1_CTS__GPIO_0_26 + MX23_PAD_I2C_SCL__I2C_SCL + MX23_PAD_I2C_SDA__I2C_SDA + MX23_PAD_LCD_DOTCK__GPIO_1_22 + MX23_PAD_LCD_HSYNC__GPIO_1_24 + MX23_PAD_PWM3__GPIO_1_29 + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; + }; + }; + + apbx@80040000 { + pwm: pwm@80064000 { + pinctrl-names = "default"; + pinctrl-0 = <&pwm2_pins_a>; + status = "okay"; + }; + + duart: serial@80070000 { + pinctrl-names = "default"; + pinctrl-0 = <&duart_pins_a>; + status = "okay"; + }; + + usbphy0: usbphy@8007c000 { + status = "okay"; + }; + + lradc@80050000 { + status = "okay"; + }; + }; + }; + + ahb@80080000 { + usb0: usb@80080000 { + dr_mode = "peripheral"; + status = "okay"; + }; + }; + + reg_vddio_sd0: regulator-vddio-sd0 { + compatible = "regulator-fixed"; + regulator-name = "vddio-sd0"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio0 8 0>; + }; + + reg_vddio_sd1: regulator-vddio-sd1 { + compatible = "regulator-fixed"; + regulator-name = "vddio-sd1"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio1 29 0>; + }; + + reg_vdd_touchpad: regulator-vdd-touchpad0 { + compatible = "regulator-fixed"; + regulator-name = "vdd-touchpad0"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio0 26 0>; + regulator-always-on; + enable-active-low; + }; + + reg_vdd_tuner: regulator-vdd-tuner0 { + compatible = "regulator-fixed"; + regulator-name = "vdd-tuner0"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio0 29 0>; + regulator-always-on; + enable-active-low; + }; + + backlight { + compatible = "pwm-backlight"; + pwms = <&pwm 2 5000000>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <6>; + }; + + i2c-0 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "i2c-gpio"; + gpios = < + &gpio1 24 0 /* SDA */ + &gpio1 22 0 /* SCL */ + >; + i2c-gpio,delay-us = <2>; /* ~100 kHz */ + }; + + i2c-1 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "i2c-gpio"; + gpios = < + &gpio0 31 0 /* SDA */ + &gpio0 30 0 /* SCL */ + >; + i2c-gpio,delay-us = <2>; /* ~100 kHz */ + + touch: touch@20 { + compatible = "synaptics,synaptics_i2c"; + reg = <0x20>; + }; + + eeprom: eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + pagesize = <32>; + }; + }; + +}; -- cgit v1.2.3