From 59c51591a0ac7568824f541f57de967e88adaa07 Mon Sep 17 00:00:00 2001 From: Michael Opdenacker Date: Wed, 9 May 2007 08:57:56 +0200 Subject: Fix occurrences of "the the " Signed-off-by: Michael Opdenacker Signed-off-by: Adrian Bunk --- Documentation/ABI/removed/devfs | 2 +- Documentation/driver-model/platform.txt | 2 +- Documentation/netlabel/introduction.txt | 2 +- Documentation/pci.txt | 2 +- Documentation/powerpc/booting-without-of.txt | 2 +- arch/mips/Makefile | 2 +- arch/mips/pci/fixup-sb1250.c | 4 ++-- arch/powerpc/platforms/cell/io-workarounds.c | 2 +- arch/v850/kernel/entry.S | 2 +- block/ll_rw_blk.c | 2 +- drivers/block/rd.c | 2 +- drivers/char/drm/drm_dma.c | 2 +- drivers/char/drm/drm_vm.c | 2 +- drivers/char/drm/r300_reg.h | 2 +- drivers/char/pcmcia/cm4000_cs.c | 2 +- drivers/ide/pci/siimage.c | 2 +- drivers/ieee1394/nodemgr.c | 2 +- drivers/isdn/hardware/eicon/divasync.h | 2 +- drivers/isdn/hisax/hfc_usb.c | 4 ++-- drivers/media/dvb/dvb-usb/dvb-usb-remote.c | 2 +- drivers/media/dvb/frontends/tda10021.c | 2 +- drivers/media/dvb/frontends/ves1x93.c | 2 +- drivers/media/video/em28xx/em28xx-video.c | 2 +- drivers/media/video/usbvideo/vicam.c | 2 +- drivers/message/fusion/mptbase.c | 2 +- drivers/mtd/maps/nettel.c | 2 +- drivers/mtd/onenand/onenand_base.c | 2 +- drivers/net/bonding/bond_main.c | 2 +- drivers/net/eepro.c | 2 +- drivers/net/ixgb/ixgb_ee.c | 2 +- drivers/net/meth.h | 2 +- drivers/net/tulip/interrupt.c | 2 +- drivers/net/tulip/winbond-840.c | 2 +- drivers/net/tulip/xircom_cb.c | 2 +- drivers/net/typhoon.c | 2 +- drivers/net/wireless/airport.c | 2 +- drivers/s390/char/sclp_rw.c | 2 +- drivers/s390/net/qeth_main.c | 2 +- drivers/s390/scsi/zfcp_qdio.c | 2 +- drivers/scsi/aic7xxx/aic79xx_pci.c | 2 +- drivers/scsi/aic94xx/Makefile | 2 +- drivers/scsi/dc395x.c | 6 +++--- drivers/scsi/scsi_lib.c | 2 +- drivers/usb/misc/auerswald.c | 2 +- drivers/usb/net/usbnet.h | 2 +- drivers/video/i810/i810_main.c | 2 +- drivers/video/skeletonfb.c | 2 +- fs/jfs/jfs_dmap.c | 2 +- fs/jfs/jfs_imap.c | 4 ++-- fs/jfs/jfs_logmgr.c | 2 +- fs/xfs/xfs_itable.c | 2 +- include/asm-arm/dma-mapping.h | 2 +- include/asm-powerpc/ppc-pci.h | 2 +- include/linux/ext3_fs_i.h | 2 +- include/linux/ext4_fs_i.h | 2 +- include/linux/radix-tree.h | 4 ++-- include/linux/security.h | 2 +- include/linux/usb.h | 2 +- kernel/relay.c | 2 +- kernel/wait.c | 2 +- mm/mmap.c | 2 +- net/decnet/af_decnet.c | 2 +- net/ipv4/cipso_ipv4.c | 2 +- net/ipv4/ipvs/ip_vs_sed.c | 2 +- net/ipv4/udp.c | 2 +- net/llc/af_llc.c | 2 +- net/netfilter/nf_conntrack_expect.c | 2 +- net/sctp/chunk.c | 2 +- net/sctp/socket.c | 4 ++-- net/sunrpc/svcauth.c | 2 +- scripts/basic/docproc.c | 2 +- sound/pci/ac97/ac97_codec.c | 2 +- 72 files changed, 79 insertions(+), 79 deletions(-) diff --git a/Documentation/ABI/removed/devfs b/Documentation/ABI/removed/devfs index 8195c4e0d0a1..8ffd28bf6598 100644 --- a/Documentation/ABI/removed/devfs +++ b/Documentation/ABI/removed/devfs @@ -6,7 +6,7 @@ Description: races, contains a naming policy within the kernel that is against the LSB, and can be replaced by using udev. The files fs/devfs/*, include/linux/devfs_fs*.h were removed, - along with the the assorted devfs function calls throughout the + along with the assorted devfs function calls throughout the kernel tree. Users: diff --git a/Documentation/driver-model/platform.txt b/Documentation/driver-model/platform.txt index f7c9262b2dc8..c5491c22086c 100644 --- a/Documentation/driver-model/platform.txt +++ b/Documentation/driver-model/platform.txt @@ -125,7 +125,7 @@ three different ways to find such a match: usually register later during booting, or by module loading. - Registering a driver using platform_driver_probe() works just like - using platform_driver_register(), except that the the driver won't + using platform_driver_register(), except that the driver won't be probed later if another device registers. (Which is OK, since this interface is only for use with non-hotpluggable devices.) diff --git a/Documentation/netlabel/introduction.txt b/Documentation/netlabel/introduction.txt index a4ffba1694c8..5ecd8d1dcf4e 100644 --- a/Documentation/netlabel/introduction.txt +++ b/Documentation/netlabel/introduction.txt @@ -30,7 +30,7 @@ The communication layer exists to allow NetLabel configuration and monitoring from user space. The NetLabel communication layer uses a message based protocol built on top of the Generic NETLINK transport mechanism. The exact formatting of these NetLabel messages as well as the Generic NETLINK family -names can be found in the the 'net/netlabel/' directory as comments in the +names can be found in the 'net/netlabel/' directory as comments in the header files as well as in 'include/net/netlabel.h'. * Security Module API diff --git a/Documentation/pci.txt b/Documentation/pci.txt index e2c9d0a0c43d..d38261b67905 100644 --- a/Documentation/pci.txt +++ b/Documentation/pci.txt @@ -373,7 +373,7 @@ E.g. clearing pending interrupts. 3.6 Register IRQ handler ~~~~~~~~~~~~~~~~~~~~~~~~ -While calling request_irq() is the the last step described here, +While calling request_irq() is the last step described here, this is often just another intermediate step to initialize a device. This step can often be deferred until the device is opened for use. diff --git a/Documentation/powerpc/booting-without-of.txt b/Documentation/powerpc/booting-without-of.txt index d4bfae75c946..c141f2388474 100644 --- a/Documentation/powerpc/booting-without-of.txt +++ b/Documentation/powerpc/booting-without-of.txt @@ -1444,7 +1444,7 @@ platforms are moved over to use the flattened-device-tree model. Basically, it is a bus of devices, that could act more or less as a complete entity (UCC, USB etc ). All of them should be siblings on the "root" qe node, using the common properties from there. - The description below applies to the the qe of MPC8360 and + The description below applies to the qe of MPC8360 and more nodes and properties would be extended in the future. i) Root QE device diff --git a/arch/mips/Makefile b/arch/mips/Makefile index f2f742df32c7..4892db88a86a 100644 --- a/arch/mips/Makefile +++ b/arch/mips/Makefile @@ -92,7 +92,7 @@ cflags-y += -ffreestanding # when fed the toolchain default! # # Certain gcc versions upto gcc 4.1.1 (probably 4.2-subversion as of -# 2006-10-10 don't properly change the the predefined symbols if -EB / -EL +# 2006-10-10 don't properly change the predefined symbols if -EB / -EL # are used, so we kludge that here. A bug has been filed at # http://gcc.gnu.org/bugzilla/show_bug.cgi?id=29413. # diff --git a/arch/mips/pci/fixup-sb1250.c b/arch/mips/pci/fixup-sb1250.c index 7a7444874e80..0ad39e53f7b1 100644 --- a/arch/mips/pci/fixup-sb1250.c +++ b/arch/mips/pci/fixup-sb1250.c @@ -14,7 +14,7 @@ #include /* - * Set the the BCM1250, etc. PCI host bridge's TRDY timeout + * Set the BCM1250, etc. PCI host bridge's TRDY timeout * to the finite max. */ static void __init quirk_sb1250_pci(struct pci_dev *dev) @@ -35,7 +35,7 @@ DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_SIBYTE, PCI_DEVICE_ID_BCM1250_HT, quirk_sb1250_ht); /* - * Set the the SP1011 HT/PCI bridge's TRDY timeout to the finite max. + * Set the SP1011 HT/PCI bridge's TRDY timeout to the finite max. */ static void __init quirk_sp1011(struct pci_dev *dev) { diff --git a/arch/powerpc/platforms/cell/io-workarounds.c b/arch/powerpc/platforms/cell/io-workarounds.c index d68d920eb2c4..7fb92f23f380 100644 --- a/arch/powerpc/platforms/cell/io-workarounds.c +++ b/arch/powerpc/platforms/cell/io-workarounds.c @@ -74,7 +74,7 @@ static void spider_io_flush(const volatile void __iomem *addr) /* Fast path if we have a non-0 token, it indicates which bus we * are on. * - * If the token is 0, that means either the the ioremap was done + * If the token is 0, that means either that the ioremap was done * before we initialized this layer, or it's a PIO operation. We * fallback to a low path in this case. Hopefully, internal devices * which are ioremap'ed early should use in_XX/out_XX functions diff --git a/arch/v850/kernel/entry.S b/arch/v850/kernel/entry.S index 8bc521ca081f..e4327a8d6bcd 100644 --- a/arch/v850/kernel/entry.S +++ b/arch/v850/kernel/entry.S @@ -523,7 +523,7 @@ END(ret_from_trap) /* This the initial entry point for a new child thread, with an appropriate - stack in place that makes it look the the child is in the middle of an + stack in place that makes it look that the child is in the middle of an syscall. This function is actually `returned to' from switch_thread (copy_thread makes ret_from_fork the return address in each new thread's saved context). */ diff --git a/block/ll_rw_blk.c b/block/ll_rw_blk.c index d99d402953a3..f294f1538f1e 100644 --- a/block/ll_rw_blk.c +++ b/block/ll_rw_blk.c @@ -1704,7 +1704,7 @@ EXPORT_SYMBOL(blk_stop_queue); * on a queue, such as calling the unplug function after a timeout. * A block device may call blk_sync_queue to ensure that any * such activity is cancelled, thus allowing it to release resources - * the the callbacks might use. The caller must already have made sure + * that the callbacks might use. The caller must already have made sure * that its ->make_request_fn will not re-add plugging prior to calling * this function. * diff --git a/drivers/block/rd.c b/drivers/block/rd.c index 43d4ebcb3b44..a1512da32410 100644 --- a/drivers/block/rd.c +++ b/drivers/block/rd.c @@ -151,7 +151,7 @@ static int ramdisk_commit_write(struct file *file, struct page *page, } /* - * ->writepage to the the blockdev's mapping has to redirty the page so that the + * ->writepage to the blockdev's mapping has to redirty the page so that the * VM doesn't go and steal it. We return AOP_WRITEPAGE_ACTIVATE so that the VM * won't try to (pointlessly) write the page again for a while. * diff --git a/drivers/char/drm/drm_dma.c b/drivers/char/drm/drm_dma.c index 892db7096986..32ed19c9ec1c 100644 --- a/drivers/char/drm/drm_dma.c +++ b/drivers/char/drm/drm_dma.c @@ -65,7 +65,7 @@ int drm_dma_setup(drm_device_t * dev) * \param dev DRM device. * * Free all pages associated with DMA buffers, the buffers and pages lists, and - * finally the the drm_device::dma structure itself. + * finally the drm_device::dma structure itself. */ void drm_dma_takedown(drm_device_t * dev) { diff --git a/drivers/char/drm/drm_vm.c b/drivers/char/drm/drm_vm.c index 35540cfb43dd..b5c5b9fa84c3 100644 --- a/drivers/char/drm/drm_vm.c +++ b/drivers/char/drm/drm_vm.c @@ -157,7 +157,7 @@ static __inline__ struct page *drm_do_vm_nopage(struct vm_area_struct *vma, * \param address access address. * \return pointer to the page structure. * - * Get the the mapping, find the real physical page to map, get the page, and + * Get the mapping, find the real physical page to map, get the page, and * return it. */ static __inline__ struct page *drm_do_vm_shm_nopage(struct vm_area_struct *vma, diff --git a/drivers/char/drm/r300_reg.h b/drivers/char/drm/r300_reg.h index a881f96c983e..ecda760ae8c0 100644 --- a/drivers/char/drm/r300_reg.h +++ b/drivers/char/drm/r300_reg.h @@ -293,7 +293,7 @@ I am fairly certain that they are correct unless stated otherwise in comments. # define R300_PVS_CNTL_1_PROGRAM_START_SHIFT 0 # define R300_PVS_CNTL_1_POS_END_SHIFT 10 # define R300_PVS_CNTL_1_PROGRAM_END_SHIFT 20 -/* Addresses are relative the the vertex program parameters area. */ +/* Addresses are relative to the vertex program parameters area. */ #define R300_VAP_PVS_CNTL_2 0x22D4 # define R300_PVS_CNTL_2_PARAM_OFFSET_SHIFT 0 # define R300_PVS_CNTL_2_PARAM_COUNT_SHIFT 16 diff --git a/drivers/char/pcmcia/cm4000_cs.c b/drivers/char/pcmcia/cm4000_cs.c index e91b43a014b0..4ea587983aef 100644 --- a/drivers/char/pcmcia/cm4000_cs.c +++ b/drivers/char/pcmcia/cm4000_cs.c @@ -1114,7 +1114,7 @@ static ssize_t cmm_write(struct file *filp, const char __user *buf, /* * wait for atr to become valid. * note: it is important to lock this code. if we dont, the monitor - * could be run between test_bit and the the call the sleep on the + * could be run between test_bit and the call to sleep on the * atr-queue. if *then* the monitor detects atr valid, it will wake up * any process on the atr-queue, *but* since we have been interrupted, * we do not yet sleep on this queue. this would result in a missed diff --git a/drivers/ide/pci/siimage.c b/drivers/ide/pci/siimage.c index c0188de3cc66..79cec50a242f 100644 --- a/drivers/ide/pci/siimage.c +++ b/drivers/ide/pci/siimage.c @@ -831,7 +831,7 @@ static void __devinit init_mmio_iops_siimage(ide_hwif_t *hwif) /* * Now set up the hw. We have to do this ourselves as - * the MMIO layout isnt the same as the the standard port + * the MMIO layout isnt the same as the standard port * based I/O */ diff --git a/drivers/ieee1394/nodemgr.c b/drivers/ieee1394/nodemgr.c index 6a1a0572275e..835937e38529 100644 --- a/drivers/ieee1394/nodemgr.c +++ b/drivers/ieee1394/nodemgr.c @@ -1702,7 +1702,7 @@ static int nodemgr_host_thread(void *__hi) generation = get_hpsb_generation(host); /* If we get a reset before we are done waiting, then - * start the the waiting over again */ + * start the waiting over again */ if (generation != g) g = generation, i = 0; } diff --git a/drivers/isdn/hardware/eicon/divasync.h b/drivers/isdn/hardware/eicon/divasync.h index af3eb9e795b5..85784a7ffb25 100644 --- a/drivers/isdn/hardware/eicon/divasync.h +++ b/drivers/isdn/hardware/eicon/divasync.h @@ -216,7 +216,7 @@ typedef struct #define SERIAL_HOOK_RING 0x85 #define SERIAL_HOOK_DETACH 0x8f unsigned char Flags; /* function refinements */ - /* parameters passed by the the ATTACH request */ + /* parameters passed by the ATTACH request */ SERIAL_INT_CB InterruptHandler; /* called on each interrupt */ SERIAL_DPC_CB DeferredHandler; /* called on hook state changes */ void *HandlerContext; /* context for both handlers */ diff --git a/drivers/isdn/hisax/hfc_usb.c b/drivers/isdn/hisax/hfc_usb.c index 99e70d4103b6..1f18f1993387 100644 --- a/drivers/isdn/hisax/hfc_usb.c +++ b/drivers/isdn/hisax/hfc_usb.c @@ -1217,11 +1217,11 @@ usb_init(hfcusb_data * hfc) /* aux = output, reset off */ write_usb(hfc, HFCUSB_CIRM, 0x10); - /* set USB_SIZE to match the the wMaxPacketSize for INT or BULK transfers */ + /* set USB_SIZE to match the wMaxPacketSize for INT or BULK transfers */ write_usb(hfc, HFCUSB_USB_SIZE, (hfc->packet_size / 8) | ((hfc->packet_size / 8) << 4)); - /* set USB_SIZE_I to match the the wMaxPacketSize for ISO transfers */ + /* set USB_SIZE_I to match the wMaxPacketSize for ISO transfers */ write_usb(hfc, HFCUSB_USB_SIZE_I, hfc->iso_packet_size); /* enable PCM/GCI master mode */ diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-remote.c b/drivers/media/dvb/dvb-usb/dvb-usb-remote.c index 68ed3a788083..9200a30dd1b9 100644 --- a/drivers/media/dvb/dvb-usb/dvb-usb-remote.c +++ b/drivers/media/dvb/dvb-usb/dvb-usb-remote.c @@ -3,7 +3,7 @@ * Copyright (C) 2004-6 Patrick Boettcher (patrick.boettcher@desy.de) * see dvb-usb-init.c for copyright information. * - * This file contains functions for initializing the the input-device and for handling remote-control-queries. + * This file contains functions for initializing the input-device and for handling remote-control-queries. */ #include "dvb-usb-common.h" #include diff --git a/drivers/media/dvb/frontends/tda10021.c b/drivers/media/dvb/frontends/tda10021.c index 110536843e8e..e725f612a6b7 100644 --- a/drivers/media/dvb/frontends/tda10021.c +++ b/drivers/media/dvb/frontends/tda10021.c @@ -1,6 +1,6 @@ /* TDA10021 - Single Chip Cable Channel Receiver driver module - used on the the Siemens DVB-C cards + used on the Siemens DVB-C cards Copyright (C) 1999 Convergence Integrated Media GmbH Copyright (C) 2004 Markus Schulz diff --git a/drivers/media/dvb/frontends/ves1x93.c b/drivers/media/dvb/frontends/ves1x93.c index 54d7b07571b8..23fd0303c91b 100644 --- a/drivers/media/dvb/frontends/ves1x93.c +++ b/drivers/media/dvb/frontends/ves1x93.c @@ -306,7 +306,7 @@ static int ves1x93_read_status(struct dvb_frontend* fe, fe_status_t* status) * The ves1893 sometimes returns sync values that make no sense, * because, e.g., the SIGNAL bit is 0, while some of the higher * bits are 1 (and how can there be a CARRIER w/o a SIGNAL?). - * Tests showed that the the VITERBI and SYNC bits are returned + * Tests showed that the VITERBI and SYNC bits are returned * reliably, while the SIGNAL and CARRIER bits ar sometimes wrong. * If such a case occurs, we read the value again, until we get a * valid value. diff --git a/drivers/media/video/em28xx/em28xx-video.c b/drivers/media/video/em28xx/em28xx-video.c index bec67609500f..2c7b158ce7e1 100644 --- a/drivers/media/video/em28xx/em28xx-video.c +++ b/drivers/media/video/em28xx/em28xx-video.c @@ -1729,7 +1729,7 @@ static int em28xx_usb_probe(struct usb_interface *interface, endpoint = &interface->cur_altsetting->endpoint[1].desc; - /* check if the the device has the iso in endpoint at the correct place */ + /* check if the device has the iso in endpoint at the correct place */ if ((endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) != USB_ENDPOINT_XFER_ISOC) { em28xx_err(DRIVER_NAME " probing error: endpoint is non-ISO endpoint!\n"); diff --git a/drivers/media/video/usbvideo/vicam.c b/drivers/media/video/usbvideo/vicam.c index 876fd2768242..982b115193f8 100644 --- a/drivers/media/video/usbvideo/vicam.c +++ b/drivers/media/video/usbvideo/vicam.c @@ -28,7 +28,7 @@ * * Portions of this code were also copied from usbvideo.c * - * Special thanks to the the whole team at Sourceforge for help making + * Special thanks to the whole team at Sourceforge for help making * this driver become a reality. Notably: * Andy Armstrong who reverse engineered the color encoding and * Pavel Machek and Chris Cheney who worked on reverse engineering the diff --git a/drivers/message/fusion/mptbase.c b/drivers/message/fusion/mptbase.c index 97471af4309c..5021d1a2a1d4 100644 --- a/drivers/message/fusion/mptbase.c +++ b/drivers/message/fusion/mptbase.c @@ -3585,7 +3585,7 @@ initChainBuffers(MPT_ADAPTER *ioc) * index = chain_idx * * Calculate the number of chain buffers needed(plus 1) per I/O - * then multiply the the maximum number of simultaneous cmds + * then multiply the maximum number of simultaneous cmds * * num_sge = num sge in request frame + last chain buffer * scale = num sge per chain buffer if no chain element diff --git a/drivers/mtd/maps/nettel.c b/drivers/mtd/maps/nettel.c index 9f53c655af3a..7b96cd02f82b 100644 --- a/drivers/mtd/maps/nettel.c +++ b/drivers/mtd/maps/nettel.c @@ -358,7 +358,7 @@ int __init nettel_init(void) /* Turn other PAR off so the first probe doesn't find it */ *intel1par = 0; - /* Probe for the the size of the first Intel flash */ + /* Probe for the size of the first Intel flash */ nettel_intel_map.size = maxsize; nettel_intel_map.phys = intel0addr; nettel_intel_map.virt = ioremap_nocache(intel0addr, maxsize); diff --git a/drivers/mtd/onenand/onenand_base.c b/drivers/mtd/onenand/onenand_base.c index 000794c6caf5..0537fac8de74 100644 --- a/drivers/mtd/onenand/onenand_base.c +++ b/drivers/mtd/onenand/onenand_base.c @@ -2192,7 +2192,7 @@ static int onenand_check_maf(int manuf) * @param mtd MTD device structure * * OneNAND detection method: - * Compare the the values from command with ones from register + * Compare the values from command with ones from register */ static int onenand_probe(struct mtd_info *mtd) { diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index 724bce51f936..223517dcbcfd 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -3461,7 +3461,7 @@ void bond_unregister_arp(struct bonding *bond) /*---------------------------- Hashing Policies -----------------------------*/ /* - * Hash for the the output device based upon layer 3 and layer 4 data. If + * Hash for the output device based upon layer 3 and layer 4 data. If * the packet is a frag or not TCP or UDP, just use layer 3 data. If it is * altogether not IP, mimic bond_xmit_hash_policy_l2() */ diff --git a/drivers/net/eepro.c b/drivers/net/eepro.c index 39654e1e2bed..47680237f783 100644 --- a/drivers/net/eepro.c +++ b/drivers/net/eepro.c @@ -1126,7 +1126,7 @@ static void eepro_tx_timeout (struct net_device *dev) printk (KERN_ERR "%s: transmit timed out, %s?\n", dev->name, "network cable problem"); /* This is not a duplicate. One message for the console, - one for the the log file */ + one for the log file */ printk (KERN_DEBUG "%s: transmit timed out, %s?\n", dev->name, "network cable problem"); eepro_complete_selreset(ioaddr); diff --git a/drivers/net/ixgb/ixgb_ee.c b/drivers/net/ixgb/ixgb_ee.c index f15aebde7b90..52c99d01d568 100644 --- a/drivers/net/ixgb/ixgb_ee.c +++ b/drivers/net/ixgb/ixgb_ee.c @@ -315,7 +315,7 @@ ixgb_wait_eeprom_command(struct ixgb_hw *hw) * hw - Struct containing variables accessed by shared code * * Reads the first 64 16 bit words of the EEPROM and sums the values read. - * If the the sum of the 64 16 bit words is 0xBABA, the EEPROM's checksum is + * If the sum of the 64 16 bit words is 0xBABA, the EEPROM's checksum is * valid. * * Returns: diff --git a/drivers/net/meth.h b/drivers/net/meth.h index 84960dae2a22..ea3b8fc86d1e 100644 --- a/drivers/net/meth.h +++ b/drivers/net/meth.h @@ -126,7 +126,7 @@ typedef struct rx_packet { /* Note: when loopback is set this bit becomes collision control. Setting this bit will */ /* cause a collision to be reported. */ - /* Bits 5 and 6 are used to determine the the Destination address filter mode */ + /* Bits 5 and 6 are used to determine the Destination address filter mode */ #define METH_ACCEPT_MY 0 /* 00: Accept PHY address only */ #define METH_ACCEPT_MCAST 0x20 /* 01: Accept physical, broadcast, and multicast filter matches only */ #define METH_ACCEPT_AMCAST 0x40 /* 10: Accept physical, broadcast, and all multicast packets */ diff --git a/drivers/net/tulip/interrupt.c b/drivers/net/tulip/interrupt.c index 9b08afbd1f65..ea896777bcaf 100644 --- a/drivers/net/tulip/interrupt.c +++ b/drivers/net/tulip/interrupt.c @@ -269,7 +269,7 @@ done: This would turn on IM for devices that is not contributing to backlog congestion with unnecessary latency. - We monitor the the device RX-ring and have: + We monitor the device RX-ring and have: HW Interrupt Mitigation either ON or OFF. diff --git a/drivers/net/tulip/winbond-840.c b/drivers/net/tulip/winbond-840.c index fa440706fb4a..38f3b99716b8 100644 --- a/drivers/net/tulip/winbond-840.c +++ b/drivers/net/tulip/winbond-840.c @@ -1021,7 +1021,7 @@ static int start_tx(struct sk_buff *skb, struct net_device *dev) np->tx_ring[entry].length |= DescEndRing; /* Now acquire the irq spinlock. - * The difficult race is the the ordering between + * The difficult race is the ordering between * increasing np->cur_tx and setting DescOwned: * - if np->cur_tx is increased first the interrupt * handler could consider the packet as transmitted diff --git a/drivers/net/tulip/xircom_cb.c b/drivers/net/tulip/xircom_cb.c index 985a1810ca59..2470b1ee33c0 100644 --- a/drivers/net/tulip/xircom_cb.c +++ b/drivers/net/tulip/xircom_cb.c @@ -1043,7 +1043,7 @@ static int enable_promisc(struct xircom_private *card) /* -link_status() checks the the links status and will return 0 for no link, 10 for 10mbit link and 100 for.. guess what. +link_status() checks the links status and will return 0 for no link, 10 for 10mbit link and 100 for.. guess what. Must be called in locked state with interrupts disabled */ diff --git a/drivers/net/typhoon.c b/drivers/net/typhoon.c index f2dd7763cd0b..f72573594121 100644 --- a/drivers/net/typhoon.c +++ b/drivers/net/typhoon.c @@ -639,7 +639,7 @@ typhoon_issue_command(struct typhoon *tp, int num_cmd, struct cmd_desc *cmd, typhoon_inc_cmd_index(&ring->lastWrite, num_cmd); - /* "I feel a presence... another warrior is on the the mesa." + /* "I feel a presence... another warrior is on the mesa." */ wmb(); iowrite32(ring->lastWrite, tp->ioaddr + TYPHOON_REG_CMD_READY); diff --git a/drivers/net/wireless/airport.c b/drivers/net/wireless/airport.c index 38fac3bbcd82..7d5b8c2cc614 100644 --- a/drivers/net/wireless/airport.c +++ b/drivers/net/wireless/airport.c @@ -149,7 +149,7 @@ static int airport_hard_reset(struct orinoco_private *priv) /* Vitally important. If we don't do this it seems we get an * interrupt somewhere during the power cycle, since * hw_unavailable is already set it doesn't get ACKed, we get - * into an interrupt loop and the the PMU decides to turn us + * into an interrupt loop and the PMU decides to turn us * off. */ disable_irq(dev->irq); diff --git a/drivers/s390/char/sclp_rw.c b/drivers/s390/char/sclp_rw.c index bbd5b8b66f42..d6b06ab81188 100644 --- a/drivers/s390/char/sclp_rw.c +++ b/drivers/s390/char/sclp_rw.c @@ -23,7 +23,7 @@ /* * The room for the SCCB (only for writing) is not equal to a pages size - * (as it is specified as the maximum size in the the SCLP documentation) + * (as it is specified as the maximum size in the SCLP documentation) * because of the additional data structure described above. */ #define MAX_SCCB_ROOM (PAGE_SIZE - sizeof(struct sclp_buffer)) diff --git a/drivers/s390/net/qeth_main.c b/drivers/s390/net/qeth_main.c index 29d176036e5c..0b96d49dd636 100644 --- a/drivers/s390/net/qeth_main.c +++ b/drivers/s390/net/qeth_main.c @@ -2860,7 +2860,7 @@ qeth_flush_buffers(struct qeth_qdio_out_q *queue, int under_int, if (!atomic_read(&queue->set_pci_flags_count)){ /* * there's no outstanding PCI any more, so we - * have to request a PCI to be sure the the PCI + * have to request a PCI to be sure that the PCI * will wake at some time in the future then we * can flush packed buffers that might still be * hanging around, which can happen if no diff --git a/drivers/s390/scsi/zfcp_qdio.c b/drivers/s390/scsi/zfcp_qdio.c index cb08ca3cc0f9..bdf5782b8a7a 100644 --- a/drivers/s390/scsi/zfcp_qdio.c +++ b/drivers/s390/scsi/zfcp_qdio.c @@ -222,7 +222,7 @@ zfcp_qdio_handler_error_check(struct zfcp_adapter *adapter, unsigned int status, * Since we have been using this adapter, it is save to assume * that it is not failed but recoverable. The card seems to * report link-up events by self-initiated queue shutdown. - * That is why we need to clear the the link-down flag + * That is why we need to clear the link-down flag * which is set again in case we have missed by a mile. */ zfcp_erp_adapter_reopen( diff --git a/drivers/scsi/aic7xxx/aic79xx_pci.c b/drivers/scsi/aic7xxx/aic79xx_pci.c index 8d72bbae96ad..0bada0028aa0 100644 --- a/drivers/scsi/aic7xxx/aic79xx_pci.c +++ b/drivers/scsi/aic7xxx/aic79xx_pci.c @@ -966,7 +966,7 @@ ahd_aic790X_setup(struct ahd_softc *ahd) | AHD_BUSFREEREV_BUG; ahd->bugs |= AHD_LQOOVERRUN_BUG|AHD_EARLY_REQ_BUG; - /* If the user requested the the SLOWCRC bit to be set. */ + /* If the user requested that the SLOWCRC bit to be set. */ if (aic79xx_slowcrc) ahd->features |= AHD_AIC79XXB_SLOWCRC; diff --git a/drivers/scsi/aic94xx/Makefile b/drivers/scsi/aic94xx/Makefile index e6b70123940c..e78ce0fa44d2 100644 --- a/drivers/scsi/aic94xx/Makefile +++ b/drivers/scsi/aic94xx/Makefile @@ -6,7 +6,7 @@ # # This file is licensed under GPLv2. # -# This file is part of the the aic94xx driver. +# This file is part of the aic94xx driver. # # The aic94xx driver is free software; you can redistribute it and/or # modify it under the terms of the GNU General Public License as diff --git a/drivers/scsi/dc395x.c b/drivers/scsi/dc395x.c index a965ed3548d5..564ea90ed3a0 100644 --- a/drivers/scsi/dc395x.c +++ b/drivers/scsi/dc395x.c @@ -541,7 +541,7 @@ static struct ParameterData __devinitdata cfg_data[] = { /* - * Safe settings. If set to zero the the BIOS/default values with + * Safe settings. If set to zero the BIOS/default values with * command line overrides will be used. If set to 1 then safe and * slow settings will be used. */ @@ -617,7 +617,7 @@ static void __devinit fix_settings(void) /* * Mapping from the eeprom delay index value (index into this array) - * to the the number of actual seconds that the delay should be for. + * to the number of actual seconds that the delay should be for. */ static char __devinitdata eeprom_index_to_delay_map[] = { 1, 3, 5, 10, 16, 30, 60, 120 }; @@ -4136,7 +4136,7 @@ static void __devinit trms1040_write_all(struct NvRamType *eeprom, unsigned long * @io_port: base I/O address * @addr: offset into SEEPROM * - * Returns the the byte read. + * Returns the byte read. **/ static u8 __devinit trms1040_get_data(unsigned long io_port, u8 addr) { diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c index 61fbcdcbb009..1f5a07bf2a75 100644 --- a/drivers/scsi/scsi_lib.c +++ b/drivers/scsi/scsi_lib.c @@ -173,7 +173,7 @@ int scsi_queue_insert(struct scsi_cmnd *cmd, int reason) * @retries: number of times to retry request * @flags: or into request flags; * - * returns the req->errors value which is the the scsi_cmnd result + * returns the req->errors value which is the scsi_cmnd result * field. **/ int scsi_execute(struct scsi_device *sdev, const unsigned char *cmd, diff --git a/drivers/usb/misc/auerswald.c b/drivers/usb/misc/auerswald.c index b5332e679c46..88fb56d5db8f 100644 --- a/drivers/usb/misc/auerswald.c +++ b/drivers/usb/misc/auerswald.c @@ -1307,7 +1307,7 @@ static int auerswald_addservice (pauerswald_t cp, pauerscon_t scp) } -/* remove a service from the the device +/* remove a service from the device scp->id must be set! */ static void auerswald_removeservice (pauerswald_t cp, pauerscon_t scp) { diff --git a/drivers/usb/net/usbnet.h b/drivers/usb/net/usbnet.h index cbb53e065d6c..82db5a8e528e 100644 --- a/drivers/usb/net/usbnet.h +++ b/drivers/usb/net/usbnet.h @@ -129,7 +129,7 @@ extern void usbnet_disconnect(struct usb_interface *); /* Drivers that reuse some of the standard USB CDC infrastructure - * (notably, using multiple interfaces according to the the CDC + * (notably, using multiple interfaces according to the CDC * union descriptor) get some helper code. */ struct cdc_state { diff --git a/drivers/video/i810/i810_main.c b/drivers/video/i810/i810_main.c index 7e760197cf29..1a7d7789d877 100644 --- a/drivers/video/i810/i810_main.c +++ b/drivers/video/i810/i810_main.c @@ -1717,7 +1717,7 @@ static int __devinit i810_alloc_agp_mem(struct fb_info *info) * @info: pointer to device specific info structure * * DESCRIPTION: - * Sets the the user monitor's horizontal and vertical + * Sets the user monitor's horizontal and vertical * frequency limits */ static void __devinit i810_init_monspecs(struct fb_info *info) diff --git a/drivers/video/skeletonfb.c b/drivers/video/skeletonfb.c index 842b5cd054c6..836a612af977 100644 --- a/drivers/video/skeletonfb.c +++ b/drivers/video/skeletonfb.c @@ -14,7 +14,7 @@ * of it. * * First the roles of struct fb_info and struct display have changed. Struct - * display will go away. The way the the new framebuffer console code will + * display will go away. The way the new framebuffer console code will * work is that it will act to translate data about the tty/console in * struct vc_data to data in a device independent way in struct fb_info. Then * various functions in struct fb_ops will be called to store the device diff --git a/fs/jfs/jfs_dmap.c b/fs/jfs/jfs_dmap.c index 82b0544bd76d..f3b1ebb22280 100644 --- a/fs/jfs/jfs_dmap.c +++ b/fs/jfs/jfs_dmap.c @@ -1507,7 +1507,7 @@ dbAllocAG(struct bmap * bmp, int agno, s64 nblocks, int l2nb, s64 * results) if (l2nb < budmin) { /* search the lower level dmap control pages to get - * the starting block number of the the dmap that + * the starting block number of the dmap that * contains or starts off the free space. */ if ((rc = diff --git a/fs/jfs/jfs_imap.c b/fs/jfs/jfs_imap.c index c465607be991..c6530227cda6 100644 --- a/fs/jfs/jfs_imap.c +++ b/fs/jfs/jfs_imap.c @@ -386,7 +386,7 @@ int diRead(struct inode *ip) return -EIO; } - /* locate the the disk inode requested */ + /* locate the disk inode requested */ dp = (struct dinode *) mp->data; dp += rel_inode; @@ -1407,7 +1407,7 @@ int diAlloc(struct inode *pip, bool dir, struct inode *ip) inum = pip->i_ino + 1; ino = inum & (INOSPERIAG - 1); - /* back off the the hint if it is outside of the iag */ + /* back off the hint if it is outside of the iag */ if (ino == 0) inum = pip->i_ino; diff --git a/fs/jfs/jfs_logmgr.c b/fs/jfs/jfs_logmgr.c index 6a3f00dc8c83..44a2f33cb98d 100644 --- a/fs/jfs/jfs_logmgr.c +++ b/fs/jfs/jfs_logmgr.c @@ -1960,7 +1960,7 @@ static void lbmfree(struct lbuf * bp) /* * NAME: lbmRedrive * - * FUNCTION: add a log buffer to the the log redrive list + * FUNCTION: add a log buffer to the log redrive list * * PARAMETER: * bp - log buffer diff --git a/fs/xfs/xfs_itable.c b/fs/xfs/xfs_itable.c index 7775ddc0b3c6..e725ddd3de5f 100644 --- a/fs/xfs/xfs_itable.c +++ b/fs/xfs/xfs_itable.c @@ -809,7 +809,7 @@ xfs_inumbers( xfs_buf_relse(agbp); agbp = NULL; /* - * Move up the the last inode in the current + * Move up the last inode in the current * chunk. The lookup_ge will always get * us the first inode in the next chunk. */ diff --git a/include/asm-arm/dma-mapping.h b/include/asm-arm/dma-mapping.h index abfb75b654c7..c8b5d0db0cf0 100644 --- a/include/asm-arm/dma-mapping.h +++ b/include/asm-arm/dma-mapping.h @@ -445,7 +445,7 @@ extern void dmabounce_unregister_dev(struct device *); * * The dmabounce routines call this function whenever a dma-mapping * is requested to determine whether a given buffer needs to be bounced - * or not. The function must return 0 if the the buffer is OK for + * or not. The function must return 0 if the buffer is OK for * DMA access and 1 if the buffer needs to be bounced. * */ diff --git a/include/asm-powerpc/ppc-pci.h b/include/asm-powerpc/ppc-pci.h index d74b2965bb82..6dcd7a811fe1 100644 --- a/include/asm-powerpc/ppc-pci.h +++ b/include/asm-powerpc/ppc-pci.h @@ -64,7 +64,7 @@ struct pci_dev *pci_get_device_by_addr(unsigned long addr); * eeh_slot_error_detail -- record and EEH error condition to the log * @severity: 1 if temporary, 2 if permanent failure. * - * Obtains the the EEH error details from the RTAS subsystem, + * Obtains the EEH error details from the RTAS subsystem, * and then logs these details with the RTAS error log system. */ void eeh_slot_error_detail (struct pci_dn *pdn, int severity); diff --git a/include/linux/ext3_fs_i.h b/include/linux/ext3_fs_i.h index 4395e5206746..7894dd0f3b77 100644 --- a/include/linux/ext3_fs_i.h +++ b/include/linux/ext3_fs_i.h @@ -54,7 +54,7 @@ struct ext3_block_alloc_info { /* * Was i_next_alloc_goal in ext3_inode_info * is the *physical* companion to i_next_alloc_block. - * it the the physical block number of the block which was most-recentl + * it the physical block number of the block which was most-recentl * allocated to this file. This give us the goal (target) for the next * allocation when we detect linearly ascending requests. */ diff --git a/include/linux/ext4_fs_i.h b/include/linux/ext4_fs_i.h index bb42379cb7fd..d5b177e5b395 100644 --- a/include/linux/ext4_fs_i.h +++ b/include/linux/ext4_fs_i.h @@ -52,7 +52,7 @@ struct ext4_block_alloc_info { /* * Was i_next_alloc_goal in ext4_inode_info * is the *physical* companion to i_next_alloc_block. - * it the the physical block number of the block which was most-recentl + * it the physical block number of the block which was most-recentl * allocated to this file. This give us the goal (target) for the next * allocation when we detect linearly ascending requests. */ diff --git a/include/linux/radix-tree.h b/include/linux/radix-tree.h index 0deb842541ac..f9e77d2ee320 100644 --- a/include/linux/radix-tree.h +++ b/include/linux/radix-tree.h @@ -87,10 +87,10 @@ do { \ * management of their lifetimes must be completely managed by API users. * * For API usage, in general, - * - any function _modifying_ the the tree or tags (inserting or deleting + * - any function _modifying_ the tree or tags (inserting or deleting * items, setting or clearing tags must exclude other modifications, and * exclude any functions reading the tree. - * - any function _reading_ the the tree or tags (looking up items or tags, + * - any function _reading_ the tree or tags (looking up items or tags, * gang lookups) must exclude modifications to the tree, but may occur * concurrently with other readers. * diff --git a/include/linux/security.h b/include/linux/security.h index 47e82c120f9a..9eb9e0fe0331 100644 --- a/include/linux/security.h +++ b/include/linux/security.h @@ -322,7 +322,7 @@ struct request_sock; * @dir contains the inode structure of parent of the new file. * @dentry contains the dentry structure of the new file. * @mode contains the mode of the new file. - * @dev contains the the device number. + * @dev contains the device number. * Return 0 if permission is granted. * @inode_rename: * Check for permission to rename a file or directory. diff --git a/include/linux/usb.h b/include/linux/usb.h index cfbd2bb8fa2c..94bd38a6d947 100644 --- a/include/linux/usb.h +++ b/include/linux/usb.h @@ -126,7 +126,7 @@ enum usb_interface_condition { * Each interface may have alternate settings. The initial configuration * of a device sets altsetting 0, but the device driver can change * that setting using usb_set_interface(). Alternate settings are often - * used to control the the use of periodic endpoints, such as by having + * used to control the use of periodic endpoints, such as by having * different endpoints use different amounts of reserved USB bandwidth. * All standards-conformant USB devices that use isochronous endpoints * will use them in non-default settings. diff --git a/kernel/relay.c b/kernel/relay.c index 577f251c7e28..d24395e8b6e5 100644 --- a/kernel/relay.c +++ b/kernel/relay.c @@ -310,7 +310,7 @@ static struct rchan_callbacks default_channel_callbacks = { /** * wakeup_readers - wake up readers waiting on a channel - * @work: work struct that contains the the channel buffer + * @work: work struct that contains the channel buffer * * This is the work function used to defer reader waking. The * reason waking is deferred is that calling directly from write diff --git a/kernel/wait.c b/kernel/wait.c index 59a82f63275d..444ddbfaefc4 100644 --- a/kernel/wait.c +++ b/kernel/wait.c @@ -61,7 +61,7 @@ EXPORT_SYMBOL(remove_wait_queue); * The spin_unlock() itself is semi-permeable and only protects * one way (it only protects stuff inside the critical region and * stops them from bleeding out - it would still allow subsequent - * loads to move into the the critical region). + * loads to move into the critical region). */ void fastcall prepare_to_wait(wait_queue_head_t *q, wait_queue_t *wait, int state) diff --git a/mm/mmap.c b/mm/mmap.c index cc1f543eb1b8..68b9ad2ef1d6 100644 --- a/mm/mmap.c +++ b/mm/mmap.c @@ -1720,7 +1720,7 @@ detach_vmas_to_be_unmapped(struct mm_struct *mm, struct vm_area_struct *vma, /* * Split a vma into two pieces at address 'addr', a new vma is allocated - * either for the first part or the the tail. + * either for the first part or the tail. */ int split_vma(struct mm_struct * mm, struct vm_area_struct * vma, unsigned long addr, int new_below) diff --git a/net/decnet/af_decnet.c b/net/decnet/af_decnet.c index 9fbe87c93802..bfa910b6ad25 100644 --- a/net/decnet/af_decnet.c +++ b/net/decnet/af_decnet.c @@ -1839,7 +1839,7 @@ static inline int dn_queue_too_long(struct dn_scp *scp, struct sk_buff_head *que } /* - * The DECnet spec requires the the "routing layer" accepts packets which + * The DECnet spec requires that the "routing layer" accepts packets which * are at least 230 bytes in size. This excludes any headers which the NSP * layer might add, so we always assume that we'll be using the maximal * length header on data packets. The variation in length is due to the diff --git a/net/ipv4/cipso_ipv4.c b/net/ipv4/cipso_ipv4.c index e1f18489db1d..86a2b52aad38 100644 --- a/net/ipv4/cipso_ipv4.c +++ b/net/ipv4/cipso_ipv4.c @@ -629,7 +629,7 @@ doi_walk_return: * @domain: the domain to add * * Description: - * Adds the @domain to the the DOI specified by @doi_def, this function + * Adds the @domain to the DOI specified by @doi_def, this function * should only be called by external functions (i.e. NetLabel). This function * does allocate memory. Returns zero on success, negative values on failure. * diff --git a/net/ipv4/ipvs/ip_vs_sed.c b/net/ipv4/ipvs/ip_vs_sed.c index ff366f7390d9..dd7c128f9db3 100644 --- a/net/ipv4/ipvs/ip_vs_sed.c +++ b/net/ipv4/ipvs/ip_vs_sed.c @@ -18,7 +18,7 @@ * The SED algorithm attempts to minimize each job's expected delay until * completion. The expected delay that the job will experience is * (Ci + 1) / Ui if sent to the ith server, in which Ci is the number of - * jobs on the the ith server and Ui is the fixed service rate (weight) of + * jobs on the ith server and Ui is the fixed service rate (weight) of * the ith server. The SED algorithm adopts a greedy policy that each does * what is in its own best interest, i.e. to join the queue which would * minimize its expected delay of completion. diff --git a/net/ipv4/udp.c b/net/ipv4/udp.c index 113e0c4c8a92..66026df1cc76 100644 --- a/net/ipv4/udp.c +++ b/net/ipv4/udp.c @@ -983,7 +983,7 @@ int udp_disconnect(struct sock *sk, int flags) } /* return: - * 1 if the the UDP system should process it + * 1 if the UDP system should process it * 0 if we should drop this packet * -1 if it should get processed by xfrm4_rcv_encap */ diff --git a/net/llc/af_llc.c b/net/llc/af_llc.c index 7d9fa38b6a7d..6b8a103cf9e6 100644 --- a/net/llc/af_llc.c +++ b/net/llc/af_llc.c @@ -324,7 +324,7 @@ static int llc_ui_bind(struct socket *sock, struct sockaddr *uaddr, int addrlen) memset(&laddr, 0, sizeof(laddr)); memset(&daddr, 0, sizeof(daddr)); /* - * FIXME: check if the the address is multicast, + * FIXME: check if the address is multicast, * only SOCK_DGRAM can do this. */ memcpy(laddr.mac, addr->sllc_mac, IFHWADDRLEN); diff --git a/net/netfilter/nf_conntrack_expect.c b/net/netfilter/nf_conntrack_expect.c index c31af29a4439..117cbfdb910c 100644 --- a/net/netfilter/nf_conntrack_expect.c +++ b/net/netfilter/nf_conntrack_expect.c @@ -177,7 +177,7 @@ void nf_conntrack_unexpect_related(struct nf_conntrack_expect *exp) struct nf_conntrack_expect *i; write_lock_bh(&nf_conntrack_lock); - /* choose the the oldest expectation to evict */ + /* choose the oldest expectation to evict */ list_for_each_entry_reverse(i, &nf_conntrack_expect_list, list) { if (expect_matches(i, exp) && del_timer(&i->timeout)) { nf_ct_unlink_expect(i); diff --git a/net/sctp/chunk.c b/net/sctp/chunk.c index 83ef411772f4..77fb7b06a9c4 100644 --- a/net/sctp/chunk.c +++ b/net/sctp/chunk.c @@ -3,7 +3,7 @@ * * This file is part of the SCTP kernel reference Implementation * - * This file contains the code relating the the chunk abstraction. + * This file contains the code relating the chunk abstraction. * * The SCTP reference implementation is free software; * you can redistribute it and/or modify it under the terms of diff --git a/net/sctp/socket.c b/net/sctp/socket.c index 9f1a908776de..83a76ba9d7b3 100644 --- a/net/sctp/socket.c +++ b/net/sctp/socket.c @@ -2586,7 +2586,7 @@ static int sctp_setsockopt_rtoinfo(struct sock *sk, char __user *optval, int opt * * 7.1.2 SCTP_ASSOCINFO * - * This option is used to tune the the maximum retransmission attempts + * This option is used to tune the maximum retransmission attempts * of the association. * Returns an error if the new association retransmission value is * greater than the sum of the retransmission value of the peer. @@ -4547,7 +4547,7 @@ static int sctp_getsockopt_rtoinfo(struct sock *sk, int len, * * 7.1.2 SCTP_ASSOCINFO * - * This option is used to tune the the maximum retransmission attempts + * This option is used to tune the maximum retransmission attempts * of the association. * Returns an error if the new association retransmission value is * greater than the sum of the retransmission value of the peer. diff --git a/net/sunrpc/svcauth.c b/net/sunrpc/svcauth.c index f5c3808bf85a..af7c5f05c6e1 100644 --- a/net/sunrpc/svcauth.c +++ b/net/sunrpc/svcauth.c @@ -64,7 +64,7 @@ int svc_set_client(struct svc_rqst *rqstp) } /* A request, which was authenticated, has now executed. - * Time to finalise the the credentials and verifier + * Time to finalise the credentials and verifier * and release and resources */ int svc_authorise(struct svc_rqst *rqstp) diff --git a/scripts/basic/docproc.c b/scripts/basic/docproc.c index d6071cbf13d7..f4d2f68452ba 100644 --- a/scripts/basic/docproc.c +++ b/scripts/basic/docproc.c @@ -211,7 +211,7 @@ void find_export_symbols(char * filename) * Document all external or internal functions in a file. * Call kernel-doc with following parameters: * kernel-doc -docbook -nofunction function_name1 filename - * function names are obtained from all the the src files + * function names are obtained from all the src files * by find_export_symbols. * intfunc uses -nofunction * extfunc uses -function diff --git a/sound/pci/ac97/ac97_codec.c b/sound/pci/ac97/ac97_codec.c index a9eec2a2357d..3bfb2102fc5d 100644 --- a/sound/pci/ac97/ac97_codec.c +++ b/sound/pci/ac97/ac97_codec.c @@ -1083,7 +1083,7 @@ static void check_volume_resolution(struct snd_ac97 *ac97, int reg, unsigned cha unsigned short val; snd_ac97_write(ac97, reg, 0x8080 | cbit[i] | (cbit[i] << 8)); /* Do the read twice due to buffers on some ac97 codecs. - * e.g. The STAC9704 returns exactly what you wrote the the register + * e.g. The STAC9704 returns exactly what you wrote to the register * if you read it immediately. This causes the detect routine to fail. */ val = snd_ac97_read(ac97, reg); -- cgit v1.2.3