From 69cb955aaff4ba686f6b7aa41eecd898aef2ca4a Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Tue, 28 May 2013 20:55:56 +0200 Subject: ASoC: sgtl5000: Fix VAG_POWER enabling/disabling order The VAG_POWER must be enabled after all other bits in CHIP_ANA_POWER and disabled before any other bit in CHIP_ANA_POWER. See the SGTL5000 datasheet (Table 31, BIT 7, page 42-43). Failing to follow this order will result in ugly loud "POP" noise at the end of playback. To achieve such order, use the _PRE and _POST DAPM widgets to trigger the power_vag_event, where the event type check has to be fixed accordingly as well. Signed-off-by: Marek Vasut Signed-off-by: Mark Brown (cherry picked from commit dd4d2d6dfb49e8916064f2cb07f0ad7b32a82fb7) --- sound/soc/codecs/sgtl5000.c | 14 +++++--------- 1 file changed, 5 insertions(+), 9 deletions(-) diff --git a/sound/soc/codecs/sgtl5000.c b/sound/soc/codecs/sgtl5000.c index eeb4bb2060d4..125af746461d 100644 --- a/sound/soc/codecs/sgtl5000.c +++ b/sound/soc/codecs/sgtl5000.c @@ -183,12 +183,12 @@ static int power_vag_event(struct snd_soc_dapm_widget *w, struct snd_kcontrol *kcontrol, int event) { switch (event) { - case SND_SOC_DAPM_PRE_PMU: + case SND_SOC_DAPM_POST_PMU: snd_soc_update_bits(w->codec, SGTL5000_CHIP_ANA_POWER, SGTL5000_VAG_POWERUP, SGTL5000_VAG_POWERUP); break; - case SND_SOC_DAPM_POST_PMD: + case SND_SOC_DAPM_PRE_PMD: snd_soc_update_bits(w->codec, SGTL5000_CHIP_ANA_POWER, SGTL5000_VAG_POWERUP, 0); msleep(400); @@ -249,12 +249,11 @@ static const struct snd_soc_dapm_widget sgtl5000_dapm_widgets[] = { 0, SGTL5000_CHIP_DIG_POWER, 1, 0), - SND_SOC_DAPM_SUPPLY("VAG_POWER", SGTL5000_CHIP_ANA_POWER, 7, 0, - power_vag_event, - SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMD), - SND_SOC_DAPM_ADC("ADC", "Capture", SGTL5000_CHIP_ANA_POWER, 1, 0), SND_SOC_DAPM_DAC("DAC", "Playback", SGTL5000_CHIP_ANA_POWER, 3, 0), + + SND_SOC_DAPM_PRE("VAG_POWER_PRE", power_vag_event), + SND_SOC_DAPM_POST("VAG_POWER_POST", power_vag_event), }; /* routes for sgtl5000 */ @@ -262,16 +261,13 @@ static const struct snd_soc_dapm_route audio_map[] = { {"Capture Mux", "LINE_IN", "LINE_IN"}, /* line_in --> adc_mux */ {"Capture Mux", "MIC_IN", "MIC_IN"}, /* mic_in --> adc_mux */ - {"ADC", NULL, "VAG_POWER"}, {"ADC", NULL, "Capture Mux"}, /* adc_mux --> adc */ {"AIFOUT", NULL, "ADC"}, /* adc --> i2s_out */ - {"DAC", NULL, "VAG_POWER"}, {"DAC", NULL, "AIFIN"}, /* i2s-->dac,skip audio mux */ {"Headphone Mux", "DAC", "DAC"}, /* dac --> hp_mux */ {"LO", NULL, "DAC"}, /* dac --> line_out */ - {"LINE_IN", NULL, "VAG_POWER"}, {"Headphone Mux", "LINE_IN", "LINE_IN"},/* line_in --> hp_mux */ {"HP", NULL, "Headphone Mux"}, /* hp_mux --> hp */ -- cgit v1.2.3