From c9257433f2eaf8803a1f3d3be5d984232db41ffe Mon Sep 17 00:00:00 2001 From: Vladimir Sokolovsky Date: Tue, 2 Sep 2008 13:38:29 -0700 Subject: mlx4_core: Set RAE and init mtt_sz field in FRMR MPT entries Set the RAE (remote access enable) bit and correctly initialize the MTT size in MPT entries being set up for fast register memory regions. Otherwise the callers can't enable remote access and in fact can't fast register at all (since the HCA will think no MTT entries are allocated). Signed-off-by: Vladimir Sokolovsky Signed-off-by: Roland Dreier --- drivers/net/mlx4/mr.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/drivers/net/mlx4/mr.c b/drivers/net/mlx4/mr.c index 62071d9c4a55..644adf074a35 100644 --- a/drivers/net/mlx4/mr.c +++ b/drivers/net/mlx4/mr.c @@ -67,7 +67,8 @@ struct mlx4_mpt_entry { #define MLX4_MPT_FLAG_PHYSICAL (1 << 9) #define MLX4_MPT_FLAG_REGION (1 << 8) -#define MLX4_MPT_PD_FLAG_FAST_REG (1 << 26) +#define MLX4_MPT_PD_FLAG_FAST_REG (1 << 27) +#define MLX4_MPT_PD_FLAG_RAE (1 << 28) #define MLX4_MPT_PD_FLAG_EN_INV (3 << 24) #define MLX4_MTT_FLAG_PRESENT 1 @@ -348,7 +349,10 @@ int mlx4_mr_enable(struct mlx4_dev *dev, struct mlx4_mr *mr) if (mr->mtt.order >= 0 && mr->mtt.page_shift == 0) { /* fast register MR in free state */ mpt_entry->flags |= cpu_to_be32(MLX4_MPT_FLAG_FREE); - mpt_entry->pd_flags |= cpu_to_be32(MLX4_MPT_PD_FLAG_FAST_REG); + mpt_entry->pd_flags |= cpu_to_be32(MLX4_MPT_PD_FLAG_FAST_REG | + MLX4_MPT_PD_FLAG_RAE); + mpt_entry->mtt_sz = cpu_to_be32((1 << mr->mtt.order) * + MLX4_MTT_ENTRY_PER_SEG); } else { mpt_entry->flags |= cpu_to_be32(MLX4_MPT_FLAG_SW_OWNS); } -- cgit v1.2.3 From e75b986af7881ed8d8ccb1ed154045ed17cfebd0 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Tue, 9 Sep 2008 21:38:57 +0200 Subject: clockevents: remove WARN_ON which was used to gather information The issue of the endless reprogramming loop due to a too small min_delta_ns was fixed with the previous updates of the clock events code, but we had no information about the spread of this problem. I added a WARN_ON to get automated information via kerneloops.org and to get some direct reports, which allowed me to analyse the affected machines. The WARN_ON has served its purpose and would be annoying for a release kernel. Remove it and just keep the information about the increase of the min_delta_ns value. Signed-off-by: Thomas Gleixner --- kernel/time/tick-oneshot.c | 18 ++++++++---------- 1 file changed, 8 insertions(+), 10 deletions(-) diff --git a/kernel/time/tick-oneshot.c b/kernel/time/tick-oneshot.c index 2e35501e61dd..2e8de678e767 100644 --- a/kernel/time/tick-oneshot.c +++ b/kernel/time/tick-oneshot.c @@ -43,19 +43,17 @@ int tick_dev_program_event(struct clock_event_device *dev, ktime_t expires, * and emit a warning. */ if (++i > 2) { - printk(KERN_WARNING "CE: __tick_program_event of %s is " - "stuck %llx %llx\n", dev->name ? dev->name : "?", - now.tv64, expires.tv64); - printk(KERN_WARNING - "CE: increasing min_delta_ns %ld to %ld nsec\n", - dev->min_delta_ns, dev->min_delta_ns << 1); - WARN_ON(1); - - /* Double the min. delta and try again */ + /* Increase the min. delta and try again */ if (!dev->min_delta_ns) dev->min_delta_ns = 5000; else - dev->min_delta_ns <<= 1; + dev->min_delta_ns += dev->min_delta_ns >> 1; + + printk(KERN_WARNING + "CE: %s increasing min_delta_ns to %lu nsec\n", + dev->name ? dev->name : "?", + dev->min_delta_ns << 1); + i = 0; } -- cgit v1.2.3 From f461a1d80c865e5ec4d24107adbab8b010b60e32 Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Wed, 10 Sep 2008 13:57:43 +0200 Subject: arch/x86/kernel/kdebugfs.c: introduce missing kfree Error handling code following a kmalloc should free the allocated data. Note that at the point of the change, node has not yet been stored in d, so it is not affected by the existing cleanup code. The semantic match that finds the problem is as follows: (http://www.emn.fr/x-info/coccinelle/) // @r exists@ local idexpression x; statement S; expression E; identifier f,l; position p1,p2; expression *ptr != NULL; @@ ( if ((x@p1 = \(kmalloc\|kzalloc\|kcalloc\)(...)) == NULL) S | x@p1 = \(kmalloc\|kzalloc\|kcalloc\)(...); ... if (x == NULL) S ) <... when != x when != if (...) { <+...x...+> } x->f = E ...> ( return \(0\|<+...x...+>\|ptr\); | return@p2 ...; ) @script:python@ p1 << r.p1; p2 << r.p2; @@ print "* file: %s kmalloc %s return %s" % (p1[0].file,p1[0].line,p2[0].line) // Signed-off-by: Julia Lawall Signed-off-by: Ingo Molnar --- arch/x86/kernel/kdebugfs.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/x86/kernel/kdebugfs.c b/arch/x86/kernel/kdebugfs.c index f2d43bc75514..ff7d3b0124f1 100644 --- a/arch/x86/kernel/kdebugfs.c +++ b/arch/x86/kernel/kdebugfs.c @@ -139,6 +139,7 @@ static int __init create_setup_data_nodes(struct dentry *parent) if (PageHighMem(pg)) { data = ioremap_cache(pa_data, sizeof(*data)); if (!data) { + kfree(node); error = -ENXIO; goto err_dir; } -- cgit v1.2.3 From 2389b36072892fed57a701e01a7dbe655420e5e5 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Wed, 6 Aug 2008 20:13:46 -0300 Subject: V4L/DVB (8559a): Fix a merge conflict at gspca/sonixb Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/gspca/sonixb.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/media/video/gspca/sonixb.c b/drivers/media/video/gspca/sonixb.c index 5dd78c6766ea..12b81ae526b7 100644 --- a/drivers/media/video/gspca/sonixb.c +++ b/drivers/media/video/gspca/sonixb.c @@ -232,7 +232,7 @@ static struct ctrl sd_ctrls[] = { static struct v4l2_pix_format vga_mode[] = { {160, 120, V4L2_PIX_FMT_SBGGR8, V4L2_FIELD_NONE, .bytesperline = 160, - .sizeimage = 160 * 120 * 5 / 4, + .sizeimage = 160 * 120, .colorspace = V4L2_COLORSPACE_SRGB, .priv = 2 | MODE_RAW}, {160, 120, V4L2_PIX_FMT_SN9C10X, V4L2_FIELD_NONE, @@ -264,7 +264,7 @@ static struct v4l2_pix_format sif_mode[] = { .priv = 1 | MODE_REDUCED_SIF}, {176, 144, V4L2_PIX_FMT_SBGGR8, V4L2_FIELD_NONE, .bytesperline = 176, - .sizeimage = 176 * 144 * 5 / 4, + .sizeimage = 176 * 144, .colorspace = V4L2_COLORSPACE_SRGB, .priv = 1 | MODE_RAW}, {176, 144, V4L2_PIX_FMT_SN9C10X, V4L2_FIELD_NONE, -- cgit v1.2.3 From 6c832e36447821779344f3d33970a4a7a10245cc Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Sun, 24 Aug 2008 06:29:30 -0300 Subject: V4L/DVB (8789): wm8739: remove wrong kfree i2c_client is allocated for us, we should never free it ourselves. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/wm8739.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/drivers/media/video/wm8739.c b/drivers/media/video/wm8739.c index 95c79ad80487..54ac3fe26ec2 100644 --- a/drivers/media/video/wm8739.c +++ b/drivers/media/video/wm8739.c @@ -274,10 +274,8 @@ static int wm8739_probe(struct i2c_client *client, client->addr << 1, client->adapter->name); state = kmalloc(sizeof(struct wm8739_state), GFP_KERNEL); - if (state == NULL) { - kfree(client); + if (state == NULL) return -ENOMEM; - } state->vol_l = 0x17; /* 0dB */ state->vol_r = 0x17; /* 0dB */ state->muted = 0; -- cgit v1.2.3 From baf25731e54d06eb13dc4eda78c6dc7da4ce84e8 Mon Sep 17 00:00:00 2001 From: "Zhang, Yanmin" Date: Tue, 9 Sep 2008 11:26:33 +0800 Subject: sched: fix 2.6.27-rc5 couldn't boot on tulsa machine randomly On my tulsa x86-64 machine, kernel 2.6.25-rc5 couldn't boot randomly. Basically, function __enable_runtime forgets to reset rt_rq->rt_throttled to 0. When every cpu is up, per-cpu migration_thread is created and it runs very fast, sometimes to mark the corresponding rt_rq->rt_throttled to 1 very quickly. After all cpus are up, with below calling chain: sched_init_smp => arch_init_sched_domains => build_sched_domains => ... => cpu_attach_domain => rq_attach_root => set_rq_online => ... => _enable_runtime _enable_runtime is called against every rt_rq again, so rt_rq->rt_time is reset to 0, but rt_rq->rt_throttled might be still 1. Later on function do_sched_rt_period_timer couldn't reset it, and all RT tasks couldn't be scheduled to run on that cpu. here is RT task migration_thread which is woken up when a task is migrated to another cpu. Below patch fixes it against 2.6.27-rc5. Signed-off-by: Zhang Yanmin Signed-off-by: Ingo Molnar --- kernel/sched_rt.c | 1 + 1 file changed, 1 insertion(+) diff --git a/kernel/sched_rt.c b/kernel/sched_rt.c index 552310798dad..1113157b2058 100644 --- a/kernel/sched_rt.c +++ b/kernel/sched_rt.c @@ -350,6 +350,7 @@ static void __enable_runtime(struct rq *rq) spin_lock(&rt_rq->rt_runtime_lock); rt_rq->rt_runtime = rt_b->rt_runtime; rt_rq->rt_time = 0; + rt_rq->rt_throttled = 0; spin_unlock(&rt_rq->rt_runtime_lock); spin_unlock(&rt_b->rt_runtime_lock); } -- cgit v1.2.3 From ec5d498991e87c74730509508b25c3959192b7e7 Mon Sep 17 00:00:00 2001 From: Hiroshi Shimamoto Date: Wed, 10 Sep 2008 17:00:19 -0700 Subject: sched: fix deadlock in setting scheduler parameter to zero Andrei Gusev wrote: > I played witch scheduler settings. After doing something like: > echo -n 1000000 >sched_rt_period_us > > command is locked. I found in kernel.log: > > Sep 11 00:39:34 zaratustra > Sep 11 00:39:34 zaratustra Pid: 4495, comm: bash Tainted: G W > (2.6.26.3 #12) > Sep 11 00:39:34 zaratustra EIP: 0060:[] EFLAGS: 00210246 CPU: 0 > Sep 11 00:39:34 zaratustra EIP is at div64_u64+0x57/0x80 > Sep 11 00:39:34 zaratustra EAX: 0000389f EBX: 00000000 ECX: 00000000 > EDX: 00000000 > Sep 11 00:39:34 zaratustra ESI: d9800000 EDI: d9800000 EBP: 0000389f > ESP: ea7a6edc > Sep 11 00:39:34 zaratustra DS: 007b ES: 007b FS: 0000 GS: 0033 SS: 0068 > Sep 11 00:39:34 zaratustra Process bash (pid: 4495, ti=ea7a6000 > task=ea744000 task.ti=ea7a6000) > Sep 11 00:39:34 zaratustra Stack: 00000000 000003e8 d9800000 0000389f > c0119042 00000000 00000000 00000001 > Sep 11 00:39:34 zaratustra 00000000 00000000 ea7a6f54 00010000 00000000 > c04d2e80 00000001 000e7ef0 > Sep 11 00:39:34 zaratustra c01191a3 00000000 00000000 ea7a6fa0 00000001 > ffffffff c04d2e80 ea5b2480 > Sep 11 00:39:34 zaratustra Call Trace: > Sep 11 00:39:34 zaratustra [] __rt_schedulable+0x52/0x130 > Sep 11 00:39:34 zaratustra [] sched_rt_handler+0x83/0x120 > Sep 11 00:39:34 zaratustra [] proc_sys_call_handler+0xb6/0xd0 > Sep 11 00:39:34 zaratustra [] proc_sys_write+0x0/0x20 > Sep 11 00:39:34 zaratustra [] proc_sys_write+0x19/0x20 > Sep 11 00:39:34 zaratustra [] vfs_write+0xa8/0x140 > Sep 11 00:39:34 zaratustra [] sys_write+0x41/0x80 > Sep 11 00:39:34 zaratustra [] sysenter_past_esp+0x6a/0x91 > Sep 11 00:39:34 zaratustra ======================= > Sep 11 00:39:34 zaratustra Code: c8 41 0f ad f3 d3 ee f6 c1 20 0f 45 de > 31 f6 0f ad ef d3 ed f6 c1 20 0f 45 fd 0f 45 ee 31 c9 39 eb 89 fe 89 ea > 77 08 89 e8 31 d2 f3 89 c1 89 f0 8b 7c 24 08 f7 f3 8b 74 24 04 89 > ca 8b 1c 24 > Sep 11 00:39:34 zaratustra EIP: [] div64_u64+0x57/0x80 SS:ESP > 0068:ea7a6edc > Sep 11 00:39:34 zaratustra ---[ end trace 4eaa2a86a8e2da22 ]--- fix the boundary condition. sysctl_sched_rt_period=0 makes exception at to_ratio(). Signed-off-by: Hiroshi Shimamoto Signed-off-by: Ingo Molnar --- kernel/sched.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/kernel/sched.c b/kernel/sched.c index cc1f81b50b82..98890807375b 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -8909,6 +8909,9 @@ static int sched_rt_global_constraints(void) u64 rt_runtime, rt_period; int ret = 0; + if (sysctl_sched_rt_period <= 0) + return -EINVAL; + rt_period = ktime_to_ns(tg->rt_bandwidth.rt_period); rt_runtime = tg->rt_bandwidth.rt_runtime; @@ -8925,6 +8928,9 @@ static int sched_rt_global_constraints(void) unsigned long flags; int i; + if (sysctl_sched_rt_period <= 0) + return -EINVAL; + spin_lock_irqsave(&def_rt_bandwidth.rt_runtime_lock, flags); for_each_possible_cpu(i) { struct rt_rq *rt_rq = &cpu_rq(i)->rt; -- cgit v1.2.3 From f1926ce63b996b42772b39e4b47bb4ef4ba748b4 Mon Sep 17 00:00:00 2001 From: Dominik Brodowski Date: Thu, 11 Sep 2008 11:09:49 +0200 Subject: clocksource, acpi_pm.c: fix check for monotonicity MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Actually check the monotonicity of the ACPI PMTMR ten times, only delay for 0.9 miliseconds at most, and bail out early if some problem is determined. Reported-by: Jochen Voß Signed-off-by: Dominik Brodowski Signed-off-by: Ingo Molnar --- drivers/clocksource/acpi_pm.c | 21 ++++++++++----------- 1 file changed, 10 insertions(+), 11 deletions(-) diff --git a/drivers/clocksource/acpi_pm.c b/drivers/clocksource/acpi_pm.c index 4eee533f3f4a..71d2ac4e3f46 100644 --- a/drivers/clocksource/acpi_pm.c +++ b/drivers/clocksource/acpi_pm.c @@ -178,11 +178,13 @@ static int verify_pmtmr_rate(void) /* Number of monotonicity checks to perform during initialization */ #define ACPI_PM_MONOTONICITY_CHECKS 10 +/* Number of reads we try to get two different values */ +#define ACPI_PM_READ_CHECKS 10000 static int __init init_acpi_pm_clocksource(void) { cycle_t value1, value2; - unsigned int i, j, good = 0; + unsigned int i, j = 0; if (!pmtmr_ioport) return -ENODEV; @@ -192,29 +194,26 @@ static int __init init_acpi_pm_clocksource(void) /* "verify" this timing source: */ for (j = 0; j < ACPI_PM_MONOTONICITY_CHECKS; j++) { + udelay(100 * j); value1 = clocksource_acpi_pm.read(); - for (i = 0; i < 10000; i++) { + for (i = 0; i < ACPI_PM_READ_CHECKS; i++) { value2 = clocksource_acpi_pm.read(); if (value2 == value1) continue; if (value2 > value1) - good++; break; if ((value2 < value1) && ((value2) < 0xFFF)) - good++; break; printk(KERN_INFO "PM-Timer had inconsistent results:" " 0x%#llx, 0x%#llx - aborting.\n", value1, value2); return -EINVAL; } - udelay(300 * i); - } - - if (good != ACPI_PM_MONOTONICITY_CHECKS) { - printk(KERN_INFO "PM-Timer failed consistency check " - " (0x%#llx) - aborting.\n", value1); - return -ENODEV; + if (i == ACPI_PM_READ_CHECKS) { + printk(KERN_INFO "PM-Timer failed consistency check " + " (0x%#llx) - aborting.\n", value1); + return -ENODEV; + } } if (verify_pmtmr_rate() != 0) -- cgit v1.2.3 From 0ad5bce7409d681a5655c66e64bb0eb740b89c1f Mon Sep 17 00:00:00 2001 From: Jeremy Fitzhardinge Date: Thu, 11 Sep 2008 16:42:00 -0700 Subject: x86: fix possible x86_64 and EFI regression Russ Anderson reported a boot crash with EFI and latest mainline: BIOS-e820: 00000000fffa0000 - 00000000fffac000 (reserved) Pid: 0, comm: swapper Not tainted 2.6.27-rc5-00100-gec0c15a-dirty #5 Call Trace: [] early_idt_handler+0x55/0x69 [] __memcpy+0x12/0xa4 [] efi_init+0xce/0x932 [] setup_early_serial8250_console+0x2d/0x36a [] __insert_resource+0x18/0xc8 [] setup_arch+0x3a7/0x632 [] start_kernel+0x91/0x367 [] x86_64_start_kernel+0xe3/0xe7 [] x86_64_start_kernel+0x0/0xe7 RIP 0x10 Such a crash is possible if the CPU in this system is a 64-bit processor which doesn't support NX (ie, old Intel P4 -based64-bit processors). Certainly, if we support such processors, then we should start with _PAGE_NX initially clear in __supported_pte_flags, and then set it once we've established that the processor does indeed support NX. That will prevent early_ioremap - or anything else - from trying to set it. The simple fix is to simply call check_efer() earlier. Reported-by: Russ Anderson Signed-off-by: Jeremy Fitzhardinge Signed-off-by: Ingo Molnar --- arch/x86/kernel/setup.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c index 362d4e7f2d38..9838f2539dfc 100644 --- a/arch/x86/kernel/setup.c +++ b/arch/x86/kernel/setup.c @@ -670,6 +670,10 @@ void __init setup_arch(char **cmdline_p) parse_early_param(); +#ifdef CONFIG_X86_64 + check_efer(); +#endif + #if defined(CONFIG_VMI) && defined(CONFIG_X86_32) /* * Must be before kernel pagetables are setup @@ -738,7 +742,6 @@ void __init setup_arch(char **cmdline_p) #else num_physpages = max_pfn; - check_efer(); /* How many end-of-memory variables you have, grandma! */ /* need this before calling reserve_initrd */ -- cgit v1.2.3 From 048feec5548c0582ee96148c61b87cccbcb5f9be Mon Sep 17 00:00:00 2001 From: Andrew Vasquez Date: Thu, 11 Sep 2008 22:19:45 -0700 Subject: [SCSI] qla2xxx: Defer enablement of RISC interrupts until ISP initialization completes. Josip Rodin noted (http://article.gmane.org/gmane.linux.ports.sparc/10152) the driver oopsing during registration of an rport to the FC-transport layer with a backtrace indicating a dereferencing of an shost->shost_data equal to NULL. David Miller identified a small window in driver logic where this could happen: > Look at how the driver registers the IRQ handler before the host has > been registered with the SCSI layer. > > That leads to a window of time where the shost hasn't been setup > fully, yet ISRs can come in and trigger DPC thread events, such as > loop resyncs, which expect the transport area to be setup. > > But it won't be setup, because scsi_add_host() hasn't finished yet. > > Note that in Josip's crash log, we don't even see the > > qla_printk(KERN_INFO, ha, "\n" > " QLogic Fibre Channel HBA Driver: %s\n" > " QLogic %s - %s\n" > " ISP%04X: %s @ %s hdma%c, host#=%ld, fw=%s\n", > ... > > message yet. > > Which means that the crash occurs between qla2x00_request_irqs() > and printing that message. Close this window by enabling RISC interrupts after the host has been registered with the SCSI midlayer. Reported-by: Josip Rodin Cc: Stable Tree Signed-off-by: Andrew Vasquez Signed-off-by: James Bottomley --- drivers/scsi/qla2xxx/qla_isr.c | 1 - drivers/scsi/qla2xxx/qla_os.c | 2 ++ 2 files changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c index 45a3b93eed57..bf41887cdd65 100644 --- a/drivers/scsi/qla2xxx/qla_isr.c +++ b/drivers/scsi/qla2xxx/qla_isr.c @@ -1834,7 +1834,6 @@ clear_risc_ints: WRT_REG_WORD(®->isp.hccr, HCCR_CLR_HOST_INT); } spin_unlock_irq(&ha->hardware_lock); - ha->isp_ops->enable_intrs(ha); fail: return ret; diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c index 26afe44265c7..6d0f0e5f2827 100644 --- a/drivers/scsi/qla2xxx/qla_os.c +++ b/drivers/scsi/qla2xxx/qla_os.c @@ -1740,6 +1740,8 @@ qla2x00_probe_one(struct pci_dev *pdev, const struct pci_device_id *id) if (ret) goto probe_failed; + ha->isp_ops->enable_intrs(ha); + scsi_scan_host(host); qla2x00_alloc_sysfs_attr(ha); -- cgit v1.2.3 From 5670a43d710a12fcbbfaefd3991002768b488d82 Mon Sep 17 00:00:00 2001 From: Jeremy Fitzhardinge Date: Sun, 14 Sep 2008 07:42:23 -0700 Subject: xen: fix for xen guest with mem > 3.7G PFN_PHYS() can truncate large addresses unless its passed a suitable large type. This is fixed more generally in the patch series introducing phys_addr_t, but we need a short-term fix to solve a Xen regression reported by Roberto De Ioris. Reported-by: Roberto De Ioris Signed-off-by: Jeremy Fitzhardinge Signed-off-by: Ingo Molnar --- arch/x86/xen/setup.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/xen/setup.c b/arch/x86/xen/setup.c index b6acc3a0af46..d67901083888 100644 --- a/arch/x86/xen/setup.c +++ b/arch/x86/xen/setup.c @@ -42,7 +42,7 @@ char * __init xen_memory_setup(void) e820.nr_map = 0; - e820_add_region(0, PFN_PHYS(max_pfn), E820_RAM); + e820_add_region(0, PFN_PHYS((u64)max_pfn), E820_RAM); /* * Even though this is normal, usable memory under Xen, reserve -- cgit v1.2.3 From 5132895f14a57607152f7865dc862fb076ce2585 Mon Sep 17 00:00:00 2001 From: Alex Nixon Date: Wed, 3 Sep 2008 14:36:40 +0100 Subject: x86/paravirt: Remove duplicate paravirt_pagetable_setup_{start, done}() They were already called once in arch/x86/kernel/setup.c - we don't need to call them again. fixes: http://bugzilla.kernel.org/show_bug.cgi?id=11485 Signed-off-by: Alex Nixon Signed-off-by: Ingo Molnar --- arch/x86/mm/init_32.c | 4 ---- 1 file changed, 4 deletions(-) diff --git a/arch/x86/mm/init_32.c b/arch/x86/mm/init_32.c index d37f29376b0c..60ec1d08ff24 100644 --- a/arch/x86/mm/init_32.c +++ b/arch/x86/mm/init_32.c @@ -458,11 +458,7 @@ static void __init pagetable_init(void) { pgd_t *pgd_base = swapper_pg_dir; - paravirt_pagetable_setup_start(pgd_base); - permanent_kmaps_init(pgd_base); - - paravirt_pagetable_setup_done(pgd_base); } #ifdef CONFIG_ACPI_SLEEP -- cgit v1.2.3 From 93821778def10ec1e69aa3ac10adee975dad4ff3 Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Mon, 15 Sep 2008 11:48:46 -0700 Subject: udp: Fix rcv socket locking The previous patch in response to the recursive locking on IPsec reception is broken as it tries to drop the BH socket lock while in user context. This patch fixes it by shrinking the section protected by the socket lock to sock_queue_rcv_skb only. The only reason we added the lock is for the accounting which happens in that function. Signed-off-by: Herbert Xu Signed-off-by: David S. Miller --- net/ipv4/udp.c | 62 +++++++++++++++++++++++++++++++--------------------------- 1 file changed, 33 insertions(+), 29 deletions(-) diff --git a/net/ipv4/udp.c b/net/ipv4/udp.c index 8e42fbbd5761..57e26fa66185 100644 --- a/net/ipv4/udp.c +++ b/net/ipv4/udp.c @@ -951,6 +951,27 @@ int udp_disconnect(struct sock *sk, int flags) return 0; } +static int __udp_queue_rcv_skb(struct sock *sk, struct sk_buff *skb) +{ + int is_udplite = IS_UDPLITE(sk); + int rc; + + if ((rc = sock_queue_rcv_skb(sk, skb)) < 0) { + /* Note that an ENOMEM error is charged twice */ + if (rc == -ENOMEM) + UDP_INC_STATS_BH(sock_net(sk), UDP_MIB_RCVBUFERRORS, + is_udplite); + goto drop; + } + + return 0; + +drop: + UDP_INC_STATS_BH(sock_net(sk), UDP_MIB_INERRORS, is_udplite); + kfree_skb(skb); + return -1; +} + /* returns: * -1: error * 0: success @@ -989,9 +1010,7 @@ int udp_queue_rcv_skb(struct sock * sk, struct sk_buff *skb) up->encap_rcv != NULL) { int ret; - bh_unlock_sock(sk); ret = (*up->encap_rcv)(sk, skb); - bh_lock_sock(sk); if (ret <= 0) { UDP_INC_STATS_BH(sock_net(sk), UDP_MIB_INDATAGRAMS, @@ -1044,17 +1063,16 @@ int udp_queue_rcv_skb(struct sock * sk, struct sk_buff *skb) goto drop; } - if ((rc = sock_queue_rcv_skb(sk,skb)) < 0) { - /* Note that an ENOMEM error is charged twice */ - if (rc == -ENOMEM) { - UDP_INC_STATS_BH(sock_net(sk), - UDP_MIB_RCVBUFERRORS, is_udplite); - atomic_inc(&sk->sk_drops); - } - goto drop; - } + rc = 0; - return 0; + bh_lock_sock(sk); + if (!sock_owned_by_user(sk)) + rc = __udp_queue_rcv_skb(sk, skb); + else + sk_add_backlog(sk, skb); + bh_unlock_sock(sk); + + return rc; drop: UDP_INC_STATS_BH(sock_net(sk), UDP_MIB_INERRORS, is_udplite); @@ -1092,15 +1110,7 @@ static int __udp4_lib_mcast_deliver(struct net *net, struct sk_buff *skb, skb1 = skb_clone(skb, GFP_ATOMIC); if (skb1) { - int ret = 0; - - bh_lock_sock(sk); - if (!sock_owned_by_user(sk)) - ret = udp_queue_rcv_skb(sk, skb1); - else - sk_add_backlog(sk, skb1); - bh_unlock_sock(sk); - + int ret = udp_queue_rcv_skb(sk, skb1); if (ret > 0) /* we should probably re-process instead * of dropping packets here. */ @@ -1195,13 +1205,7 @@ int __udp4_lib_rcv(struct sk_buff *skb, struct hlist_head udptable[], uh->dest, inet_iif(skb), udptable); if (sk != NULL) { - int ret = 0; - bh_lock_sock(sk); - if (!sock_owned_by_user(sk)) - ret = udp_queue_rcv_skb(sk, skb); - else - sk_add_backlog(sk, skb); - bh_unlock_sock(sk); + int ret = udp_queue_rcv_skb(sk, skb); sock_put(sk); /* a return value > 0 means to resubmit the input, but @@ -1494,7 +1498,7 @@ struct proto udp_prot = { .sendmsg = udp_sendmsg, .recvmsg = udp_recvmsg, .sendpage = udp_sendpage, - .backlog_rcv = udp_queue_rcv_skb, + .backlog_rcv = __udp_queue_rcv_skb, .hash = udp_lib_hash, .unhash = udp_lib_unhash, .get_port = udp_v4_get_port, -- cgit v1.2.3 From 29bdc88384c2b24e37e5760df0dc898546083d6b Mon Sep 17 00:00:00 2001 From: Vladimir Sokolovsky Date: Mon, 15 Sep 2008 14:25:23 -0700 Subject: IB/mlx4: Fix up fast register page list format Byte swap the addresses in the page list for fast register work requests to big endian to match what the HCA expectx. Also, the addresses must have the "present" bit set so that the HCA knows it can access them. Otherwise the HCA will fault the first time it accesses the memory region. Signed-off-by: Vladimir Sokolovsky Signed-off-by: Roland Dreier --- drivers/infiniband/hw/mlx4/qp.c | 6 ++++++ drivers/net/mlx4/mr.c | 2 -- include/linux/mlx4/device.h | 4 ++++ 3 files changed, 10 insertions(+), 2 deletions(-) diff --git a/drivers/infiniband/hw/mlx4/qp.c b/drivers/infiniband/hw/mlx4/qp.c index f29dbb767e87..9559248f265b 100644 --- a/drivers/infiniband/hw/mlx4/qp.c +++ b/drivers/infiniband/hw/mlx4/qp.c @@ -1342,6 +1342,12 @@ static __be32 convert_access(int acc) static void set_fmr_seg(struct mlx4_wqe_fmr_seg *fseg, struct ib_send_wr *wr) { struct mlx4_ib_fast_reg_page_list *mfrpl = to_mfrpl(wr->wr.fast_reg.page_list); + int i; + + for (i = 0; i < wr->wr.fast_reg.page_list_len; ++i) + wr->wr.fast_reg.page_list->page_list[i] = + cpu_to_be64(wr->wr.fast_reg.page_list->page_list[i] | + MLX4_MTT_FLAG_PRESENT); fseg->flags = convert_access(wr->wr.fast_reg.access_flags); fseg->mem_key = cpu_to_be32(wr->wr.fast_reg.rkey); diff --git a/drivers/net/mlx4/mr.c b/drivers/net/mlx4/mr.c index 644adf074a35..d1dd5b48dbd1 100644 --- a/drivers/net/mlx4/mr.c +++ b/drivers/net/mlx4/mr.c @@ -71,8 +71,6 @@ struct mlx4_mpt_entry { #define MLX4_MPT_PD_FLAG_RAE (1 << 28) #define MLX4_MPT_PD_FLAG_EN_INV (3 << 24) -#define MLX4_MTT_FLAG_PRESENT 1 - #define MLX4_MPT_STATUS_SW 0xF0 #define MLX4_MPT_STATUS_HW 0x00 diff --git a/include/linux/mlx4/device.h b/include/linux/mlx4/device.h index 655ea0d1ee14..b2f944468313 100644 --- a/include/linux/mlx4/device.h +++ b/include/linux/mlx4/device.h @@ -141,6 +141,10 @@ enum { MLX4_STAT_RATE_OFFSET = 5 }; +enum { + MLX4_MTT_FLAG_PRESENT = 1 +}; + static inline u64 mlx4_fw_ver(u64 major, u64 minor, u64 subminor) { return (major << 32) | (minor << 16) | subminor; -- cgit v1.2.3 From e1f4f59d1ab9ebac44830d6ae450fb358ac559d3 Mon Sep 17 00:00:00 2001 From: Sitsofe Wheeler Date: Tue, 16 Sep 2008 14:27:13 +0100 Subject: PCI: Fix pcie_aspm=force pcie_aspm=force did not work because aspm_force was being double negated leading to the sanity check failing. Moving a bracket should fix this. Acked-by: Alan Cox Signed-off-by: Sitsofe Wheeler Signed-off-by: Jesse Barnes --- drivers/pci/pcie/aspm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/pci/pcie/aspm.c b/drivers/pci/pcie/aspm.c index 9a7c9e1408a4..851f5b83cdbc 100644 --- a/drivers/pci/pcie/aspm.c +++ b/drivers/pci/pcie/aspm.c @@ -527,7 +527,7 @@ static int pcie_aspm_sanity_check(struct pci_dev *pdev) */ pci_read_config_dword(child_dev, child_pos + PCI_EXP_DEVCAP, ®32); - if (!(reg32 & PCI_EXP_DEVCAP_RBER && !aspm_force)) { + if (!(reg32 & PCI_EXP_DEVCAP_RBER) && !aspm_force) { printk("Pre-1.1 PCIe device detected, " "disable ASPM for %s. It can be enabled forcedly" " with 'pcie_aspm=force'\n", pci_name(pdev)); -- cgit v1.2.3 From cd72ad3f57c400baa2ddb78b4fc2781cf68ffb6f Mon Sep 17 00:00:00 2001 From: Henrik Rydberg Date: Sun, 14 Sep 2008 11:52:44 -0400 Subject: Input: bcm5974 - switch back to normal mode when closing Staying in multi-touch mode after closing the device sometimes makes the keyboard drop keys or repeat keys irratically. The conjecture is that some internal buffer starts to overflow, resulting in undefined behavior. Switching back to normal mode when closing the device makes the problem go away. Signed-off-by: Henrik Rydberg Signed-off-by: Dmitry Torokhov --- drivers/input/mouse/bcm5974.c | 13 +++++++++---- 1 file changed, 9 insertions(+), 4 deletions(-) diff --git a/drivers/input/mouse/bcm5974.c b/drivers/input/mouse/bcm5974.c index 18f4d7f6ce6d..2998a6ac9ae4 100644 --- a/drivers/input/mouse/bcm5974.c +++ b/drivers/input/mouse/bcm5974.c @@ -351,8 +351,9 @@ static int report_tp_state(struct bcm5974 *dev, int size) #define BCM5974_WELLSPRING_MODE_REQUEST_VALUE 0x300 #define BCM5974_WELLSPRING_MODE_REQUEST_INDEX 0 #define BCM5974_WELLSPRING_MODE_VENDOR_VALUE 0x01 +#define BCM5974_WELLSPRING_MODE_NORMAL_VALUE 0x08 -static int bcm5974_wellspring_mode(struct bcm5974 *dev) +static int bcm5974_wellspring_mode(struct bcm5974 *dev, bool on) { char *data = kmalloc(8, GFP_KERNEL); int retval = 0, size; @@ -377,7 +378,9 @@ static int bcm5974_wellspring_mode(struct bcm5974 *dev) } /* apply the mode switch */ - data[0] = BCM5974_WELLSPRING_MODE_VENDOR_VALUE; + data[0] = on ? + BCM5974_WELLSPRING_MODE_VENDOR_VALUE : + BCM5974_WELLSPRING_MODE_NORMAL_VALUE; /* write configuration */ size = usb_control_msg(dev->udev, usb_sndctrlpipe(dev->udev, 0), @@ -392,7 +395,8 @@ static int bcm5974_wellspring_mode(struct bcm5974 *dev) goto out; } - dprintk(2, "bcm5974: switched to wellspring mode.\n"); + dprintk(2, "bcm5974: switched to %s mode.\n", + on ? "wellspring" : "normal"); out: kfree(data); @@ -481,7 +485,7 @@ exit: */ static int bcm5974_start_traffic(struct bcm5974 *dev) { - if (bcm5974_wellspring_mode(dev)) { + if (bcm5974_wellspring_mode(dev, true)) { dprintk(1, "bcm5974: mode switch failed\n"); goto error; } @@ -504,6 +508,7 @@ static void bcm5974_pause_traffic(struct bcm5974 *dev) { usb_kill_urb(dev->tp_urb); usb_kill_urb(dev->bt_urb); + bcm5974_wellspring_mode(dev, false); } /* -- cgit v1.2.3 From ba0593bf553c450a03dbc5f8c1f0ff58b778a0c8 Mon Sep 17 00:00:00 2001 From: "H. Peter Anvin" Date: Tue, 16 Sep 2008 09:29:40 -0700 Subject: x86: completely disable NOPL on 32 bits Completely disable NOPL on 32 bits. It turns out that Microsoft Virtual PC is so broken it can't even reliably *fail* in the presence of NOPL. This leaves the infrastructure in place but disables it unconditionally. Signed-off-by: H. Peter Anvin --- arch/x86/kernel/cpu/common.c | 24 ++++-------------------- 1 file changed, 4 insertions(+), 20 deletions(-) diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c index 8aab8517642e..4e456bd955bb 100644 --- a/arch/x86/kernel/cpu/common.c +++ b/arch/x86/kernel/cpu/common.c @@ -344,31 +344,15 @@ static void __init early_cpu_detect(void) /* * The NOPL instruction is supposed to exist on all CPUs with - * family >= 6, unfortunately, that's not true in practice because + * family >= 6; unfortunately, that's not true in practice because * of early VIA chips and (more importantly) broken virtualizers that - * are not easy to detect. Hence, probe for it based on first - * principles. + * are not easy to detect. In the latter case it doesn't even *fail* + * reliably, so probing for it doesn't even work. Disable it completely + * unless we can find a reliable way to detect all the broken cases. */ static void __cpuinit detect_nopl(struct cpuinfo_x86 *c) { - const u32 nopl_signature = 0x888c53b1; /* Random number */ - u32 has_nopl = nopl_signature; - clear_cpu_cap(c, X86_FEATURE_NOPL); - if (c->x86 >= 6) { - asm volatile("\n" - "1: .byte 0x0f,0x1f,0xc0\n" /* nopl %eax */ - "2:\n" - " .section .fixup,\"ax\"\n" - "3: xor %0,%0\n" - " jmp 2b\n" - " .previous\n" - _ASM_EXTABLE(1b,3b) - : "+a" (has_nopl)); - - if (has_nopl == nopl_signature) - set_cpu_cap(c, X86_FEATURE_NOPL); - } } static void __cpuinit generic_identify(struct cpuinfo_x86 *c) -- cgit v1.2.3 From f26fd5d6e5006eae75a389c7ce74ed16761d094b Mon Sep 17 00:00:00 2001 From: Cornelia Huck Date: Tue, 16 Sep 2008 09:32:18 -0700 Subject: [S390] cio: Fix driver_data handling for ccwgroup devices. Since 16f7f9564c3ae190954f2ec55f385a268b93ac4d, we've seen oopses when grouping/ungrouping devices: Unable to handle kernel pointer dereference at virtual kernel address 0000000000 114000 Oops: 0004 [#1] PREEMPT SMP Modules linked in: bonding qeth_l2 dm_multipath sunrpc qeth_l3 dm_mod qeth chsc_ sch ccwgroup CPU: 1 Not tainted 2.6.26-29.x.20080815-s390xdefault #1 Process iperf (pid: 24412, task: 000000003f446038, ksp: 000000003c929e08) Krnl PSW : 0404d00180000000 000003e00006f6e6 (qeth_irq+0xda/0xb28 [qeth]) R:0 T:1 IO:0 EX:0 Key:0 M:1 W:0 P:0 AS:3 CC:1 PM:0 EA:3 Krnl GPRS: 0000000000000000 000003e000000003 0000000000000000 0000000000114ccc 000000003fb82e48 000003e00006f60c 000000000000000c 000000003ce72100 0000000000114944 000000003fb82e48 0000000000114ccc 000000003fe8fd28 000003e000066000 000003e000076128 000000003fe8fdb8 000000003fe8fd28 Krnl Code: 000003e00006f6da: bf3f2024 icm %r3,15,36(%r2) 000003e00006f6de: a774023c brc 7,3e00006fb56 000003e00006f6e2: a7280000 lhi %r2,0 >000003e00006f6e6: 5020a1a0 st %r2,416(%r10) 000003e00006f6ea: 58109000 l %r1,0(%r9) 000003e00006f6ee: a7111000 tmll %r1,4096 000003e00006f6f2: a77400f9 brc 7,3e00006f8e4 000003e00006f6f6: 8810000c srl %r1,12 Call Trace: ([<000000003fe8fd20>] 0x3fe8fd20) [<000000000033bf2a>] ccw_device_call_handler+0xb2/0xd8 [<0000000000339e1c>] ccw_device_irq+0x124/0x164 [<0000000000339758>] io_subchannel_irq+0x8c/0x118 [<00000000003309ba>] do_IRQ+0x192/0x1bc [<0000000000114f66>] io_return+0x0/0x8 [<00000000001149cc>] sysc_do_svc+0x0/0x22 ([<0000000000114a18>] sysc_noemu+0x10/0x16) [<00000200002e047c>] 0x200002e047c Last Breaking-Event-Address: [<000003e00006f6d6>] qeth_irq+0xca/0xb28 [qeth] The problem is that dev->driver_data for a ccw device is NULL, while it should point to the ccwgroup device it is a member of. This happened due to incorrect cleanup if creating a ccwgroup device failed because the ccw devices were already grouped. Fix this by setting cdev[i] to NULL in the error handling of ccwgroup_create_from_string() after we give up our reference and by checking if the driver_data points to the ccwgroup device in ccwgroup_release() just to be really sure. Signed-off-by: Cornelia Huck Signed-off-by: Martin Schwidefsky --- drivers/s390/cio/ccwgroup.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/s390/cio/ccwgroup.c b/drivers/s390/cio/ccwgroup.c index e0ce65fca4e7..9a50f245774b 100644 --- a/drivers/s390/cio/ccwgroup.c +++ b/drivers/s390/cio/ccwgroup.c @@ -113,7 +113,8 @@ ccwgroup_release (struct device *dev) for (i = 0; i < gdev->count; i++) { if (gdev->cdev[i]) { - dev_set_drvdata(&gdev->cdev[i]->dev, NULL); + if (dev_get_drvdata(&gdev->cdev[i]->dev) == gdev) + dev_set_drvdata(&gdev->cdev[i]->dev, NULL); put_device(&gdev->cdev[i]->dev); } } @@ -296,6 +297,7 @@ error: if (dev_get_drvdata(&gdev->cdev[i]->dev) == gdev) dev_set_drvdata(&gdev->cdev[i]->dev, NULL); put_device(&gdev->cdev[i]->dev); + gdev->cdev[i] = NULL; } mutex_unlock(&gdev->reg_mutex); put_device(&gdev->dev); -- cgit v1.2.3 From 9adb8c1d4f0ac78b3469e377ce5f8a846cbaedaf Mon Sep 17 00:00:00 2001 From: Stefan Weinhuber Date: Tue, 16 Sep 2008 09:32:19 -0700 Subject: [S390] cio: fix orb initialization in cio_start_key The functions cio_tm_start_key and cio_start_key use the same private orb structure of a subchannel, so the orb needs to be cleared of old data before it is used again. A respective memset is missing from cio_start_key and hereby added. Signed-off-by: Stefan Weinhuber Acked-by: Cornelia Huck Signed-off-by: Martin Schwidefsky --- drivers/s390/cio/cio.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/s390/cio/cio.c b/drivers/s390/cio/cio.c index 5954b905e3ca..326f4cc7f92c 100644 --- a/drivers/s390/cio/cio.c +++ b/drivers/s390/cio/cio.c @@ -174,6 +174,7 @@ cio_start_key (struct subchannel *sch, /* subchannel structure */ CIO_TRACE_EVENT(4, sch->dev.bus_id); orb = &to_io_private(sch)->orb; + memset(orb, 0, sizeof(union orb)); /* sch is always under 2G. */ orb->cmd.intparm = (u32)(addr_t)sch; orb->cmd.fmt = 1; -- cgit v1.2.3 From f948cc6ab9e61a8e88d70ee9aafc690e6d26f92c Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Tue, 16 Sep 2008 09:53:42 -0700 Subject: sparc64: Fix OOPS in psycho_pcierr_intr_other(). We no longer put the top-level PCI controller device into the PCI layer device list. So pbm->pci_bus->self is always NULL. Therefore, use direct PCI config space accesses to get at the PCI controller's PCI_STATUS register. Tested by Meelis Roos. Signed-off-by: David S. Miller --- arch/sparc64/kernel/pci_psycho.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/arch/sparc64/kernel/pci_psycho.c b/arch/sparc64/kernel/pci_psycho.c index e205ade69cfc..f85b6bebb0be 100644 --- a/arch/sparc64/kernel/pci_psycho.c +++ b/arch/sparc64/kernel/pci_psycho.c @@ -575,7 +575,7 @@ static irqreturn_t psycho_pcierr_intr_other(struct pci_pbm_info *pbm, int is_pbm { unsigned long csr_reg, csr, csr_error_bits; irqreturn_t ret = IRQ_NONE; - u16 stat; + u16 stat, *addr; if (is_pbm_a) { csr_reg = pbm->controller_regs + PSYCHO_PCIA_CTRL; @@ -597,7 +597,9 @@ static irqreturn_t psycho_pcierr_intr_other(struct pci_pbm_info *pbm, int is_pbm printk("%s: PCI SERR signal asserted.\n", pbm->name); ret = IRQ_HANDLED; } - pci_read_config_word(pbm->pci_bus->self, PCI_STATUS, &stat); + addr = psycho_pci_config_mkaddr(pbm, pbm->pci_first_busno, + 0, PCI_STATUS); + pci_config_read16(addr, &stat); if (stat & (PCI_STATUS_PARITY | PCI_STATUS_SIG_TARGET_ABORT | PCI_STATUS_REC_TARGET_ABORT | @@ -605,7 +607,7 @@ static irqreturn_t psycho_pcierr_intr_other(struct pci_pbm_info *pbm, int is_pbm PCI_STATUS_SIG_SYSTEM_ERROR)) { printk("%s: PCI bus error, PCI_STATUS[%04x]\n", pbm->name, stat); - pci_write_config_word(pbm->pci_bus->self, PCI_STATUS, 0xffff); + pci_config_write16(addr, 0xffff); ret = IRQ_HANDLED; } return ret; -- cgit v1.2.3 From 1577e4b70a04cce39f296cc714da5ad5d272105a Mon Sep 17 00:00:00 2001 From: Kristoffer Ericson Date: Tue, 16 Sep 2008 14:19:25 -0400 Subject: Input: jornada720_ts - fix build error ( LONG() usage ) This patch removes the usage of LONG() which is deprecated; we also replace BIT() with BIT_MASK(). signed-off-by: Kristoffer Ericson Signed-off-by: Dmitry Torokhov --- drivers/input/touchscreen/jornada720_ts.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/input/touchscreen/jornada720_ts.c b/drivers/input/touchscreen/jornada720_ts.c index 1aca108b1031..b7f1260738a6 100644 --- a/drivers/input/touchscreen/jornada720_ts.c +++ b/drivers/input/touchscreen/jornada720_ts.c @@ -119,8 +119,8 @@ static int __devinit jornada720_ts_probe(struct platform_device *pdev) input_dev->id.bustype = BUS_HOST; input_dev->dev.parent = &pdev->dev; - input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_ABS); - input_dev->keybit[LONG(BTN_TOUCH)] = BIT(BTN_TOUCH); + input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS); + input_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH); input_set_abs_params(input_dev, ABS_X, 270, 3900, 0, 0); input_set_abs_params(input_dev, ABS_Y, 180, 3700, 0, 0); -- cgit v1.2.3 From 9843099ff46467461d6476a827f6f9701682dbac Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Tue, 16 Sep 2008 11:44:00 -0700 Subject: sparc64: Fix SMP bootup with CONFIG_STACK_DEBUG or ftrace. Based upon a report by Meelis Roos. Any function call can try to access the current thread register via the _mcount hooks when the kernel is built with -pg (via ftrace or STACK_DEBUG). That can't be setup properly very early on during the bootup of other cpus for sun4u and some early sun4v systems. So add notrace markers to these specific functions, so that _mcount doesn't get invoked too early. Signed-off-by: David S. Miller --- arch/sparc64/kernel/irq.c | 5 +++-- arch/sparc64/kernel/traps.c | 3 ++- 2 files changed, 5 insertions(+), 3 deletions(-) diff --git a/arch/sparc64/kernel/irq.c b/arch/sparc64/kernel/irq.c index 23963882bc18..7495bc774685 100644 --- a/arch/sparc64/kernel/irq.c +++ b/arch/sparc64/kernel/irq.c @@ -7,6 +7,7 @@ #include #include +#include #include #include #include @@ -866,7 +867,7 @@ static void kill_prom_timer(void) : "g1", "g2"); } -void init_irqwork_curcpu(void) +void notrace init_irqwork_curcpu(void) { int cpu = hard_smp_processor_id(); @@ -897,7 +898,7 @@ static void __cpuinit register_one_mondo(unsigned long paddr, unsigned long type } } -void __cpuinit sun4v_register_mondo_queues(int this_cpu) +void __cpuinit notrace sun4v_register_mondo_queues(int this_cpu) { struct trap_per_cpu *tb = &trap_block[this_cpu]; diff --git a/arch/sparc64/kernel/traps.c b/arch/sparc64/kernel/traps.c index 3d924121c796..c824df13f589 100644 --- a/arch/sparc64/kernel/traps.c +++ b/arch/sparc64/kernel/traps.c @@ -10,6 +10,7 @@ #include #include +#include #include #include #include @@ -2453,7 +2454,7 @@ struct trap_per_cpu trap_block[NR_CPUS]; /* This can get invoked before sched_init() so play it super safe * and use hard_smp_processor_id(). */ -void init_cur_cpu_trap(struct thread_info *t) +void notrace init_cur_cpu_trap(struct thread_info *t) { int cpu = hard_smp_processor_id(); struct trap_per_cpu *p = &trap_block[cpu]; -- cgit v1.2.3 From d7ffd5076d4407d54b25bc4b25f3002f74fbafde Mon Sep 17 00:00:00 2001 From: Faisal Latif Date: Tue, 16 Sep 2008 11:56:26 -0700 Subject: RDMA/nes: Fix client side QP destroy Fix QP not being destroyed properly on the client, which leads to userspace programs hanging on exit. This is a missing chunk from the connection management rewrite in commit 6492cdf3 ("RDMA/nes: CM connection setup/teardown rework"). Signed-off-by: Faisal Latif Signed-off-by: Roland Dreier --- drivers/infiniband/hw/nes/nes_cm.c | 11 ++--------- 1 file changed, 2 insertions(+), 9 deletions(-) diff --git a/drivers/infiniband/hw/nes/nes_cm.c b/drivers/infiniband/hw/nes/nes_cm.c index 9f0b964b2c99..499d3cf83e1f 100644 --- a/drivers/infiniband/hw/nes/nes_cm.c +++ b/drivers/infiniband/hw/nes/nes_cm.c @@ -1956,13 +1956,6 @@ static int mini_cm_reject(struct nes_cm_core *cm_core, return ret; cleanup_retrans_entry(cm_node); cm_node->state = NES_CM_STATE_CLOSED; - ret = send_fin(cm_node, NULL); - - if (cm_node->accept_pend) { - BUG_ON(!cm_node->listener); - atomic_dec(&cm_node->listener->pend_accepts_cnt); - BUG_ON(atomic_read(&cm_node->listener->pend_accepts_cnt) < 0); - } ret = send_reset(cm_node, NULL); return ret; @@ -2383,6 +2376,7 @@ static int nes_cm_disconn_true(struct nes_qp *nesqp) atomic_inc(&cm_disconnects); cm_event.event = IW_CM_EVENT_DISCONNECT; if (last_ae == NES_AEQE_AEID_LLP_CONNECTION_RESET) { + issued_disconnect_reset = 1; cm_event.status = IW_CM_EVENT_STATUS_RESET; nes_debug(NES_DBG_CM, "Generating a CM " "Disconnect Event (status reset) for " @@ -2508,7 +2502,6 @@ static int nes_disconnect(struct nes_qp *nesqp, int abrupt) nes_debug(NES_DBG_CM, "Call close API\n"); g_cm_core->api->close(g_cm_core, nesqp->cm_node); - nesqp->cm_node = NULL; } return ret; @@ -2837,6 +2830,7 @@ int nes_connect(struct iw_cm_id *cm_id, struct iw_cm_conn_param *conn_param) cm_node->apbvt_set = 1; nesqp->cm_node = cm_node; cm_node->nesqp = nesqp; + nes_add_ref(&nesqp->ibqp); return 0; } @@ -3167,7 +3161,6 @@ static void cm_event_connect_error(struct nes_cm_event *event) if (ret) printk(KERN_ERR "%s[%u] OFA CM event_handler returned, " "ret=%d\n", __func__, __LINE__, ret); - nes_rem_ref(&nesqp->ibqp); cm_id->rem_ref(cm_id); rem_ref_cm_node(event->cm_node->cm_core, event->cm_node); -- cgit v1.2.3 From e8224e4b804b4fd26723191c1891101a5959bb8a Mon Sep 17 00:00:00 2001 From: Yossi Etigin Date: Tue, 16 Sep 2008 11:57:45 -0700 Subject: IPoIB: Fix deadlock on RTNL between bcast join comp and ipoib_stop() Taking rtnl_lock in ipoib_mcast_join_complete() causes a deadlock with ipoib_stop(). We avoid it by scheduling the piece of code that takes the lock on ipoib_workqueue instead of executing it directly. This works because we only flush the ipoib_workqueue with the RTNL not held. The deadlock happens because ipoib_stop() calls ipoib_ib_dev_down() which calls ipoib_mcast_dev_flush(), which calls ipoib_mcast_free(), which calls ipoib_mcast_leave(). The latter calls ib_sa_free_multicast(), and this waits until the multicast completion handler finishes. This handler is ipoib_mcast_join_complete(), which waits for the rtnl_lock(), which was already taken by ipoib_stop(). This bug was introduced in commit a77a57a1 ("IPoIB: Fix deadlock on RTNL in ipoib_stop()"). Signed-off-by: Yossi Etigin Signed-off-by: Roland Dreier --- drivers/infiniband/ulp/ipoib/ipoib.h | 2 ++ drivers/infiniband/ulp/ipoib/ipoib_main.c | 1 + drivers/infiniband/ulp/ipoib/ipoib_multicast.c | 31 +++++++++++++++++--------- 3 files changed, 24 insertions(+), 10 deletions(-) diff --git a/drivers/infiniband/ulp/ipoib/ipoib.h b/drivers/infiniband/ulp/ipoib/ipoib.h index b0ffc9abe8c0..05eb41b8ab63 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib.h +++ b/drivers/infiniband/ulp/ipoib/ipoib.h @@ -293,6 +293,7 @@ struct ipoib_dev_priv { struct delayed_work pkey_poll_task; struct delayed_work mcast_task; + struct work_struct carrier_on_task; struct work_struct flush_light; struct work_struct flush_normal; struct work_struct flush_heavy; @@ -464,6 +465,7 @@ int ipoib_dev_init(struct net_device *dev, struct ib_device *ca, int port); void ipoib_dev_cleanup(struct net_device *dev); void ipoib_mcast_join_task(struct work_struct *work); +void ipoib_mcast_carrier_on_task(struct work_struct *work); void ipoib_mcast_send(struct net_device *dev, void *mgid, struct sk_buff *skb); void ipoib_mcast_restart_task(struct work_struct *work); diff --git a/drivers/infiniband/ulp/ipoib/ipoib_main.c b/drivers/infiniband/ulp/ipoib/ipoib_main.c index 7e9e218738fa..1b1df5cc4113 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib_main.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_main.c @@ -1075,6 +1075,7 @@ static void ipoib_setup(struct net_device *dev) INIT_DELAYED_WORK(&priv->pkey_poll_task, ipoib_pkey_poll); INIT_DELAYED_WORK(&priv->mcast_task, ipoib_mcast_join_task); + INIT_WORK(&priv->carrier_on_task, ipoib_mcast_carrier_on_task); INIT_WORK(&priv->flush_light, ipoib_ib_dev_flush_light); INIT_WORK(&priv->flush_normal, ipoib_ib_dev_flush_normal); INIT_WORK(&priv->flush_heavy, ipoib_ib_dev_flush_heavy); diff --git a/drivers/infiniband/ulp/ipoib/ipoib_multicast.c b/drivers/infiniband/ulp/ipoib/ipoib_multicast.c index ac33c8f3ea85..aae28620a6e5 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib_multicast.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_multicast.c @@ -366,6 +366,21 @@ static int ipoib_mcast_sendonly_join(struct ipoib_mcast *mcast) return ret; } +void ipoib_mcast_carrier_on_task(struct work_struct *work) +{ + struct ipoib_dev_priv *priv = container_of(work, struct ipoib_dev_priv, + carrier_on_task); + + /* + * Take rtnl_lock to avoid racing with ipoib_stop() and + * turning the carrier back on while a device is being + * removed. + */ + rtnl_lock(); + netif_carrier_on(priv->dev); + rtnl_unlock(); +} + static int ipoib_mcast_join_complete(int status, struct ib_sa_multicast *multicast) { @@ -392,16 +407,12 @@ static int ipoib_mcast_join_complete(int status, &priv->mcast_task, 0); mutex_unlock(&mcast_mutex); - if (mcast == priv->broadcast) { - /* - * Take RTNL lock here to avoid racing with - * ipoib_stop() and turning the carrier back - * on while a device is being removed. - */ - rtnl_lock(); - netif_carrier_on(dev); - rtnl_unlock(); - } + /* + * Defer carrier on work to ipoib_workqueue to avoid a + * deadlock on rtnl_lock here. + */ + if (mcast == priv->broadcast) + queue_work(ipoib_workqueue, &priv->carrier_on_task); return 0; } -- cgit v1.2.3 From 2344abbcbdb82140050e8be29d3d55e4f6fe860b Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Tue, 16 Sep 2008 11:32:50 -0700 Subject: clockevents: make device shutdown robust The device shut down does not cleanup the next_event variable of the clock event device. So when the device is reactivated the possible stale next_event value can prevent the device to be reprogrammed as it claims to wait on a event already. This is the root cause of the resurfacing suspend/resume problem, where systems need key press to come back to life. Fix this by setting next_event to KTIME_MAX when the device is shut down. Use a separate function for shutdown which takes care of that and only keep the direct set mode call in the broadcast code, where we can not touch the next_event value. Signed-off-by: Thomas Gleixner --- kernel/time/clockevents.c | 12 +++++++++++- kernel/time/tick-broadcast.c | 9 ++++----- kernel/time/tick-common.c | 4 ++-- kernel/time/tick-internal.h | 2 ++ 4 files changed, 19 insertions(+), 8 deletions(-) diff --git a/kernel/time/clockevents.c b/kernel/time/clockevents.c index 1876b526c778..f8d968063cea 100644 --- a/kernel/time/clockevents.c +++ b/kernel/time/clockevents.c @@ -71,6 +71,16 @@ void clockevents_set_mode(struct clock_event_device *dev, } } +/** + * clockevents_shutdown - shutdown the device and clear next_event + * @dev: device to shutdown + */ +void clockevents_shutdown(struct clock_event_device *dev) +{ + clockevents_set_mode(dev, CLOCK_EVT_MODE_SHUTDOWN); + dev->next_event.tv64 = KTIME_MAX; +} + /** * clockevents_program_event - Reprogram the clock event device. * @expires: absolute expiry time (monotonic clock) @@ -206,7 +216,7 @@ void clockevents_exchange_device(struct clock_event_device *old, if (new) { BUG_ON(new->mode != CLOCK_EVT_MODE_UNUSED); - clockevents_set_mode(new, CLOCK_EVT_MODE_SHUTDOWN); + clockevents_shutdown(new); } local_irq_restore(flags); } diff --git a/kernel/time/tick-broadcast.c b/kernel/time/tick-broadcast.c index 2f5a38294bf9..f1f3eee28113 100644 --- a/kernel/time/tick-broadcast.c +++ b/kernel/time/tick-broadcast.c @@ -236,8 +236,7 @@ static void tick_do_broadcast_on_off(void *why) if (!cpu_isset(cpu, tick_broadcast_mask)) { cpu_set(cpu, tick_broadcast_mask); if (td->mode == TICKDEV_MODE_PERIODIC) - clockevents_set_mode(dev, - CLOCK_EVT_MODE_SHUTDOWN); + clockevents_shutdown(dev); } if (*reason == CLOCK_EVT_NOTIFY_BROADCAST_FORCE) tick_broadcast_force = 1; @@ -254,7 +253,7 @@ static void tick_do_broadcast_on_off(void *why) if (cpus_empty(tick_broadcast_mask)) { if (!bc_stopped) - clockevents_set_mode(bc, CLOCK_EVT_MODE_SHUTDOWN); + clockevents_shutdown(bc); } else if (bc_stopped) { if (tick_broadcast_device.mode == TICKDEV_MODE_PERIODIC) tick_broadcast_start_periodic(bc); @@ -306,7 +305,7 @@ void tick_shutdown_broadcast(unsigned int *cpup) if (tick_broadcast_device.mode == TICKDEV_MODE_PERIODIC) { if (bc && cpus_empty(tick_broadcast_mask)) - clockevents_set_mode(bc, CLOCK_EVT_MODE_SHUTDOWN); + clockevents_shutdown(bc); } spin_unlock_irqrestore(&tick_broadcast_lock, flags); @@ -321,7 +320,7 @@ void tick_suspend_broadcast(void) bc = tick_broadcast_device.evtdev; if (bc) - clockevents_set_mode(bc, CLOCK_EVT_MODE_SHUTDOWN); + clockevents_shutdown(bc); spin_unlock_irqrestore(&tick_broadcast_lock, flags); } diff --git a/kernel/time/tick-common.c b/kernel/time/tick-common.c index c4777193d567..019315ebf9de 100644 --- a/kernel/time/tick-common.c +++ b/kernel/time/tick-common.c @@ -249,7 +249,7 @@ static int tick_check_new_device(struct clock_event_device *newdev) * not give it back to the clockevents layer ! */ if (tick_is_broadcast_device(curdev)) { - clockevents_set_mode(curdev, CLOCK_EVT_MODE_SHUTDOWN); + clockevents_shutdown(curdev); curdev = NULL; } clockevents_exchange_device(curdev, newdev); @@ -311,7 +311,7 @@ static void tick_suspend(void) unsigned long flags; spin_lock_irqsave(&tick_device_lock, flags); - clockevents_set_mode(td->evtdev, CLOCK_EVT_MODE_SHUTDOWN); + clockevents_shutdown(td->evtdev); spin_unlock_irqrestore(&tick_device_lock, flags); } diff --git a/kernel/time/tick-internal.h b/kernel/time/tick-internal.h index 0ffc2918ea6f..6e9db9734aa6 100644 --- a/kernel/time/tick-internal.h +++ b/kernel/time/tick-internal.h @@ -10,6 +10,8 @@ extern int tick_do_timer_cpu __read_mostly; extern void tick_setup_periodic(struct clock_event_device *dev, int broadcast); extern void tick_handle_periodic(struct clock_event_device *dev); +extern void clockevents_shutdown(struct clock_event_device *dev); + /* * NO_HZ / high resolution timer shared code */ -- cgit v1.2.3 From 612f9d338a6060f814ef35b7108b43407a5df423 Mon Sep 17 00:00:00 2001 From: Timur Tabi Date: Tue, 9 Sep 2008 14:43:39 -0500 Subject: powerpc: Fix interrupt values for DMA2 in MPC8610 HPCD device tree For Freescale 8xxx devices that use an MPIC, the interrupt numbers in the device tree must be 16 greater than the values documented in the reference manual. In these chips, the MPIC is wired to use the first 16 numbers for external interrupts, but the documentation numbers internal interrupts from 0. In the MPC8610 HPCD device tree, the interrupt properties for the DMA channels for DMA2 were not the adjusted values. This fixes that. Signed-off-by: Timur Tabi Signed-off-by: Kumar Gala Signed-off-by: Paul Mackerras --- arch/powerpc/boot/dts/mpc8610_hpcd.dts | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/powerpc/boot/dts/mpc8610_hpcd.dts b/arch/powerpc/boot/dts/mpc8610_hpcd.dts index 3b3a1062cb25..584a4f184eb2 100644 --- a/arch/powerpc/boot/dts/mpc8610_hpcd.dts +++ b/arch/powerpc/boot/dts/mpc8610_hpcd.dts @@ -281,7 +281,7 @@ cell-index = <0>; reg = <0x0 0x80>; interrupt-parent = <&mpic>; - interrupts = <60 2>; + interrupts = <76 2>; }; dma-channel@1 { compatible = "fsl,mpc8610-dma-channel", @@ -289,7 +289,7 @@ cell-index = <1>; reg = <0x80 0x80>; interrupt-parent = <&mpic>; - interrupts = <61 2>; + interrupts = <77 2>; }; dma-channel@2 { compatible = "fsl,mpc8610-dma-channel", @@ -297,7 +297,7 @@ cell-index = <2>; reg = <0x100 0x80>; interrupt-parent = <&mpic>; - interrupts = <62 2>; + interrupts = <78 2>; }; dma-channel@3 { compatible = "fsl,mpc8610-dma-channel", @@ -305,7 +305,7 @@ cell-index = <3>; reg = <0x180 0x80>; interrupt-parent = <&mpic>; - interrupts = <63 2>; + interrupts = <79 2>; }; }; -- cgit v1.2.3 From b08508c40adf3fd1330aabc4f37d3254179776c4 Mon Sep 17 00:00:00 2001 From: Greg KH Date: Tue, 26 Aug 2008 08:20:34 -0700 Subject: PCI: fix compiler warnings in pci_get_subsys() pci_get_subsys() changed in 2.6.26 so that the from pointer is modified when the call is being invoked, so fix up the 'const' marking of it that the compiler is complaining about. Reported-by: Rufus & Azrael Signed-off-by: Greg Kroah-Hartman Signed-off-by: Jesse Barnes --- drivers/pci/search.c | 6 +++--- include/linux/pci.h | 8 ++++---- 2 files changed, 7 insertions(+), 7 deletions(-) diff --git a/drivers/pci/search.c b/drivers/pci/search.c index 3b3b5f178797..4edfc4731bd4 100644 --- a/drivers/pci/search.c +++ b/drivers/pci/search.c @@ -162,7 +162,7 @@ EXPORT_SYMBOL(pci_find_slot); * time. */ struct pci_dev *pci_find_device(unsigned int vendor, unsigned int device, - const struct pci_dev *from) + struct pci_dev *from) { struct pci_dev *pdev; @@ -263,7 +263,7 @@ static int match_pci_dev_by_id(struct device *dev, void *data) * this file. */ static struct pci_dev *pci_get_dev_by_id(const struct pci_device_id *id, - const struct pci_dev *from) + struct pci_dev *from) { struct device *dev; struct device *dev_start = NULL; @@ -303,7 +303,7 @@ static struct pci_dev *pci_get_dev_by_id(const struct pci_device_id *id, */ struct pci_dev *pci_get_subsys(unsigned int vendor, unsigned int device, unsigned int ss_vendor, unsigned int ss_device, - const struct pci_dev *from) + struct pci_dev *from) { struct pci_dev *pdev; struct pci_device_id *id; diff --git a/include/linux/pci.h b/include/linux/pci.h index c0e14008a3c2..98dc6243a706 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -534,7 +534,7 @@ extern void pci_sort_breadthfirst(void); #ifdef CONFIG_PCI_LEGACY struct pci_dev __deprecated *pci_find_device(unsigned int vendor, unsigned int device, - const struct pci_dev *from); + struct pci_dev *from); struct pci_dev __deprecated *pci_find_slot(unsigned int bus, unsigned int devfn); #endif /* CONFIG_PCI_LEGACY */ @@ -550,7 +550,7 @@ struct pci_dev *pci_get_device(unsigned int vendor, unsigned int device, struct pci_dev *from); struct pci_dev *pci_get_subsys(unsigned int vendor, unsigned int device, unsigned int ss_vendor, unsigned int ss_device, - const struct pci_dev *from); + struct pci_dev *from); struct pci_dev *pci_get_slot(struct pci_bus *bus, unsigned int devfn); struct pci_dev *pci_get_bus_and_slot(unsigned int bus, unsigned int devfn); struct pci_dev *pci_get_class(unsigned int class, struct pci_dev *from); @@ -816,7 +816,7 @@ _PCI_NOP_ALL(write,) static inline struct pci_dev *pci_find_device(unsigned int vendor, unsigned int device, - const struct pci_dev *from) + struct pci_dev *from) { return NULL; } @@ -838,7 +838,7 @@ static inline struct pci_dev *pci_get_subsys(unsigned int vendor, unsigned int device, unsigned int ss_vendor, unsigned int ss_device, - const struct pci_dev *from) + struct pci_dev *from) { return NULL; } -- cgit v1.2.3 From 31bd61f2bb79e098117d823e054342b03aa87668 Mon Sep 17 00:00:00 2001 From: Lachlan McIlroy Date: Wed, 17 Sep 2008 16:45:37 +1000 Subject: [XFS] Move memory allocations for log tracing out of the critical path Memory allocations for log->l_grant_trace and iclog->ic_trace are done on demand when the first event is logged. In xlog_state_get_iclog_space() we call xlog_trace_iclog() under a spinlock and allocating memory here can cause us to sleep with a spinlock held and deadlock the system. For the log grant tracing we use KM_NOSLEEP but that means we can lose trace entries. Since there is no locking to serialize the log grant tracing we could race and have multiple allocations and leak memory. So move the allocations to where we initialize the log/iclog structures. Use KM_NOFS to avoid recursing into the filesystem and drop log->l_trace since it's not even used. SGI-PV: 983738 SGI-Modid: xfs-linux-melb:xfs-kern:31896a Signed-off-by: Lachlan McIlroy Signed-off-by: Christoph Hellwig --- fs/xfs/xfs_log.c | 60 ++++++++++++++++++++++++++++++++++----------------- fs/xfs/xfs_log_priv.h | 1 - 2 files changed, 40 insertions(+), 21 deletions(-) diff --git a/fs/xfs/xfs_log.c b/fs/xfs/xfs_log.c index ccba14eb9dbe..7812bd036e2b 100644 --- a/fs/xfs/xfs_log.c +++ b/fs/xfs/xfs_log.c @@ -124,16 +124,27 @@ STATIC void xlog_verify_tail_lsn(xlog_t *log, xlog_in_core_t *iclog, STATIC int xlog_iclogs_empty(xlog_t *log); #if defined(XFS_LOG_TRACE) + +#define XLOG_TRACE_LOGGRANT_SIZE 2048 +#define XLOG_TRACE_ICLOG_SIZE 256 + +void +xlog_trace_loggrant_alloc(xlog_t *log) +{ + log->l_grant_trace = ktrace_alloc(XLOG_TRACE_LOGGRANT_SIZE, KM_NOFS); +} + +void +xlog_trace_loggrant_dealloc(xlog_t *log) +{ + ktrace_free(log->l_grant_trace); +} + void xlog_trace_loggrant(xlog_t *log, xlog_ticket_t *tic, xfs_caddr_t string) { unsigned long cnts; - if (!log->l_grant_trace) { - log->l_grant_trace = ktrace_alloc(2048, KM_NOSLEEP); - if (!log->l_grant_trace) - return; - } /* ticket counts are 1 byte each */ cnts = ((unsigned long)tic->t_ocnt) | ((unsigned long)tic->t_cnt) << 8; @@ -156,11 +167,21 @@ xlog_trace_loggrant(xlog_t *log, xlog_ticket_t *tic, xfs_caddr_t string) (void *)((unsigned long)tic->t_unit_res)); } +void +xlog_trace_iclog_alloc(xlog_in_core_t *iclog) +{ + iclog->ic_trace = ktrace_alloc(XLOG_TRACE_ICLOG_SIZE, KM_NOFS); +} + +void +xlog_trace_iclog_dealloc(xlog_in_core_t *iclog) +{ + ktrace_free(iclog->ic_trace); +} + void xlog_trace_iclog(xlog_in_core_t *iclog, uint state) { - if (!iclog->ic_trace) - iclog->ic_trace = ktrace_alloc(256, KM_NOFS); ktrace_enter(iclog->ic_trace, (void *)((unsigned long)state), (void *)((unsigned long)current_pid()), @@ -170,8 +191,15 @@ xlog_trace_iclog(xlog_in_core_t *iclog, uint state) (void *)NULL, (void *)NULL); } #else + +#define xlog_trace_loggrant_alloc(log) +#define xlog_trace_loggrant_dealloc(log) #define xlog_trace_loggrant(log,tic,string) + +#define xlog_trace_iclog_alloc(iclog) +#define xlog_trace_iclog_dealloc(iclog) #define xlog_trace_iclog(iclog,state) + #endif /* XFS_LOG_TRACE */ @@ -1231,6 +1259,7 @@ xlog_alloc_log(xfs_mount_t *mp, spin_lock_init(&log->l_grant_lock); sv_init(&log->l_flush_wait, 0, "flush_wait"); + xlog_trace_loggrant_alloc(log); /* log record size must be multiple of BBSIZE; see xlog_rec_header_t */ ASSERT((XFS_BUF_SIZE(bp) & BBMASK) == 0); @@ -1285,6 +1314,8 @@ xlog_alloc_log(xfs_mount_t *mp, sv_init(&iclog->ic_force_wait, SV_DEFAULT, "iclog-force"); sv_init(&iclog->ic_write_wait, SV_DEFAULT, "iclog-write"); + xlog_trace_iclog_alloc(iclog); + iclogp = &iclog->ic_next; } *iclogp = log->l_iclog; /* complete ring */ @@ -1565,11 +1596,7 @@ xlog_dealloc_log(xlog_t *log) sv_destroy(&iclog->ic_force_wait); sv_destroy(&iclog->ic_write_wait); xfs_buf_free(iclog->ic_bp); -#ifdef XFS_LOG_TRACE - if (iclog->ic_trace != NULL) { - ktrace_free(iclog->ic_trace); - } -#endif + xlog_trace_iclog_dealloc(iclog); next_iclog = iclog->ic_next; kmem_free(iclog); iclog = next_iclog; @@ -1578,14 +1605,7 @@ xlog_dealloc_log(xlog_t *log) spinlock_destroy(&log->l_grant_lock); xfs_buf_free(log->l_xbuf); -#ifdef XFS_LOG_TRACE - if (log->l_trace != NULL) { - ktrace_free(log->l_trace); - } - if (log->l_grant_trace != NULL) { - ktrace_free(log->l_grant_trace); - } -#endif + xlog_trace_loggrant_dealloc(log); log->l_mp->m_log = NULL; kmem_free(log); } /* xlog_dealloc_log */ diff --git a/fs/xfs/xfs_log_priv.h b/fs/xfs/xfs_log_priv.h index c8a5b22ee3e3..e7d8f84443fa 100644 --- a/fs/xfs/xfs_log_priv.h +++ b/fs/xfs/xfs_log_priv.h @@ -448,7 +448,6 @@ typedef struct log { int l_grant_write_bytes; #ifdef XFS_LOG_TRACE - struct ktrace *l_trace; struct ktrace *l_grant_trace; #endif -- cgit v1.2.3 From 6efdf281777eb07fac28ac2b2d7df1e619ee6da1 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Wed, 17 Sep 2008 16:49:33 +1000 Subject: [XFS] Fix regression introduced by remount fixup Logically we would return an error in xfs_fs_remount code to prevent users from believing they might have changed mount options using remount which can't be changed. But unfortunately mount(8) adds all options from mtab and fstab to the mount arguments in some cases so we can't blindly reject options, but have to check for each specified option if it actually differs from the currently set option and only reject it if that's the case. Until that is implemented we return success for every remount request, and silently ignore all options that we can't actually change. SGI-PV: 985710 SGI-Modid: xfs-linux-melb:xfs-kern:31908a Signed-off-by: Christoph Hellwig Signed-off-by: Tim Shimmin Signed-off-by: Lachlan McIlroy --- fs/xfs/linux-2.6/xfs_super.c | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) diff --git a/fs/xfs/linux-2.6/xfs_super.c b/fs/xfs/linux-2.6/xfs_super.c index 73c65f19e549..18d3c8487835 100644 --- a/fs/xfs/linux-2.6/xfs_super.c +++ b/fs/xfs/linux-2.6/xfs_super.c @@ -1302,9 +1302,29 @@ xfs_fs_remount( mp->m_flags &= ~XFS_MOUNT_BARRIER; break; default: + /* + * Logically we would return an error here to prevent + * users from believing they might have changed + * mount options using remount which can't be changed. + * + * But unfortunately mount(8) adds all options from + * mtab and fstab to the mount arguments in some cases + * so we can't blindly reject options, but have to + * check for each specified option if it actually + * differs from the currently set option and only + * reject it if that's the case. + * + * Until that is implemented we return success for + * every remount request, and silently ignore all + * options that we can't actually change. + */ +#if 0 printk(KERN_INFO "XFS: mount option \"%s\" not supported for remount\n", p); return -EINVAL; +#else + return 0; +#endif } } -- cgit v1.2.3 From 364f358a734ddcd827c662ccbfa58ee3ac510762 Mon Sep 17 00:00:00 2001 From: Lachlan McIlroy Date: Wed, 17 Sep 2008 16:50:14 +1000 Subject: [XFS] Prevent direct I/O from mapping extents beyond eof With the help from some tracing I found that we try to map extents beyond eof when doing a direct I/O read. It appears that the way to inform the generic direct I/O path (ie do_direct_IO()) that we have breached eof is to return an unmapped buffer from xfs_get_blocks_direct(). This will cause do_direct_IO() to jump to the hole handling code where is will check for eof and then abort. This problem was found because a direct I/O read was trying to map beyond eof and was encountering delayed allocations. The delayed allocations beyond eof are speculative allocations and they didn't get converted when the direct I/O flushed the file because there was only enough space in the current AG to convert and write out the dirty pages within eof. Note that xfs_iomap_write_allocate() wont necessarily convert all the delayed allocation passed to it - it will return after allocating the first extent - so if the delayed allocation extends beyond eof then it will stay that way. SGI-PV: 983683 SGI-Modid: xfs-linux-melb:xfs-kern:31929a Signed-off-by: Lachlan McIlroy Signed-off-by: Christoph Hellwig --- fs/xfs/linux-2.6/xfs_aops.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/fs/xfs/linux-2.6/xfs_aops.c b/fs/xfs/linux-2.6/xfs_aops.c index f42f80a3b1fa..a44d68eb50b5 100644 --- a/fs/xfs/linux-2.6/xfs_aops.c +++ b/fs/xfs/linux-2.6/xfs_aops.c @@ -1338,6 +1338,10 @@ __xfs_get_blocks( offset = (xfs_off_t)iblock << inode->i_blkbits; ASSERT(bh_result->b_size >= (1 << inode->i_blkbits)); size = bh_result->b_size; + + if (!create && direct && offset >= i_size_read(inode)) + return 0; + error = xfs_iomap(XFS_I(inode), offset, size, create ? flags : BMAPI_READ, &iomap, &niomap); if (error) -- cgit v1.2.3 From b5b8c9acd547244eb2b7d0280ba38b9dd01971cc Mon Sep 17 00:00:00 2001 From: David Chinner Date: Wed, 17 Sep 2008 16:50:50 +1000 Subject: [XFS] Fix barrier status change detection. The current code in xlog_iodone() uses the wrong macro to check if the barrier has been cleared due to an EOPNOTSUPP error form the lower layer. SGI-PV: 986143 SGI-Modid: xfs-linux-melb:xfs-kern:31984a Signed-off-by: David Chinner Signed-off-by: Nathaniel W. Turner Signed-off-by: Peter Leckie Signed-off-by: Lachlan McIlroy --- fs/xfs/xfs_log.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/xfs/xfs_log.c b/fs/xfs/xfs_log.c index 7812bd036e2b..503ea89e8b9a 100644 --- a/fs/xfs/xfs_log.c +++ b/fs/xfs/xfs_log.c @@ -1037,7 +1037,7 @@ xlog_iodone(xfs_buf_t *bp) * layer, it means the underlyin device no longer supports * barrier I/O. Warn loudly and turn off barriers. */ - if ((l->l_mp->m_flags & XFS_MOUNT_BARRIER) && !XFS_BUF_ORDERED(bp)) { + if ((l->l_mp->m_flags & XFS_MOUNT_BARRIER) && !XFS_BUF_ISORDERED(bp)) { l->l_mp->m_flags &= ~XFS_MOUNT_BARRIER; xfs_fs_cmn_err(CE_WARN, l->l_mp, "xlog_iodone: Barriers are no longer supported" -- cgit v1.2.3 From f9114eba1eb08ee75fd0f1eee780f0290fb3c043 Mon Sep 17 00:00:00 2001 From: David Chinner Date: Wed, 17 Sep 2008 16:51:21 +1000 Subject: [XFS] Prevent lockdep false positives when locking two inodes. If we call xfs_lock_two_inodes() to grab both the iolock and the ilock, then drop the ilocks on both inodes, then grab them again (as xfs_swap_extents() does) then lockdep will report a locking order problem. This is a false positive. To avoid this, disallow xfs_lock_two_inodes() fom locking both inode locks at once - force calers to make two separate calls. This means that nested dropping and regaining of the ilocks will retain the same lockdep subclass and so lockdep will not see anything wrong with this code. SGI-PV: 986238 SGI-Modid: xfs-linux-melb:xfs-kern:31999a Signed-off-by: David Chinner Signed-off-by: Christoph Hellwig Signed-off-by: Peter Leckie Signed-off-by: Lachlan McIlroy --- fs/xfs/xfs_dfrag.c | 9 ++++++++- fs/xfs/xfs_vnodeops.c | 8 ++++++++ 2 files changed, 16 insertions(+), 1 deletion(-) diff --git a/fs/xfs/xfs_dfrag.c b/fs/xfs/xfs_dfrag.c index 760f4c5b5160..75b0cd4da0ea 100644 --- a/fs/xfs/xfs_dfrag.c +++ b/fs/xfs/xfs_dfrag.c @@ -149,7 +149,14 @@ xfs_swap_extents( sbp = &sxp->sx_stat; - xfs_lock_two_inodes(ip, tip, lock_flags); + /* + * we have to do two separate lock calls here to keep lockdep + * happy. If we try to get all the locks in one call, lock will + * report false positives when we drop the ILOCK and regain them + * below. + */ + xfs_lock_two_inodes(ip, tip, XFS_IOLOCK_EXCL); + xfs_lock_two_inodes(ip, tip, XFS_ILOCK_EXCL); locked = 1; /* Verify that both files have the same format */ diff --git a/fs/xfs/xfs_vnodeops.c b/fs/xfs/xfs_vnodeops.c index aa238c8fbd7a..98a0aecafddc 100644 --- a/fs/xfs/xfs_vnodeops.c +++ b/fs/xfs/xfs_vnodeops.c @@ -1838,6 +1838,12 @@ again: #endif } +/* + * xfs_lock_two_inodes() can only be used to lock one type of lock + * at a time - the iolock or the ilock, but not both at once. If + * we lock both at once, lockdep will report false positives saying + * we have violated locking orders. + */ void xfs_lock_two_inodes( xfs_inode_t *ip0, @@ -1848,6 +1854,8 @@ xfs_lock_two_inodes( int attempts = 0; xfs_log_item_t *lp; + if (lock_mode & (XFS_IOLOCK_SHARED|XFS_IOLOCK_EXCL)) + ASSERT((lock_mode & (XFS_ILOCK_SHARED|XFS_ILOCK_EXCL)) == 0); ASSERT(ip0->i_ino != ip1->i_ino); if (ip0->i_ino > ip1->i_ino) { -- cgit v1.2.3 From e1f5dbd7077eebec794452a516cb02f1669b036d Mon Sep 17 00:00:00 2001 From: Lachlan McIlroy Date: Wed, 17 Sep 2008 16:52:13 +1000 Subject: [XFS] Fix use-after-free with buffers We have a use-after-free issue where log completions access buffers via the buffer log item and the buffer has already been freed. Fix this by taking a reference on the buffer when attaching the buffer log item and release the hold when the buffer log item is detached and we no longer need the buffer. Also create a new function xfs_buf_item_free() to combine some common code. SGI-PV: 985757 SGI-Modid: xfs-linux-melb:xfs-kern:32025a Signed-off-by: Lachlan McIlroy Signed-off-by: Christoph Hellwig --- fs/xfs/xfs_buf_item.c | 44 ++++++++++++++++++++------------------------ 1 file changed, 20 insertions(+), 24 deletions(-) diff --git a/fs/xfs/xfs_buf_item.c b/fs/xfs/xfs_buf_item.c index 608c30c3f76b..002fc2617c8e 100644 --- a/fs/xfs/xfs_buf_item.c +++ b/fs/xfs/xfs_buf_item.c @@ -732,6 +732,7 @@ xfs_buf_item_init( bip->bli_item.li_ops = &xfs_buf_item_ops; bip->bli_item.li_mountp = mp; bip->bli_buf = bp; + xfs_buf_hold(bp); bip->bli_format.blf_type = XFS_LI_BUF; bip->bli_format.blf_blkno = (__int64_t)XFS_BUF_ADDR(bp); bip->bli_format.blf_len = (ushort)BTOBB(XFS_BUF_COUNT(bp)); @@ -867,6 +868,21 @@ xfs_buf_item_dirty( return (bip->bli_flags & XFS_BLI_DIRTY); } +STATIC void +xfs_buf_item_free( + xfs_buf_log_item_t *bip) +{ +#ifdef XFS_TRANS_DEBUG + kmem_free(bip->bli_orig); + kmem_free(bip->bli_logged); +#endif /* XFS_TRANS_DEBUG */ + +#ifdef XFS_BLI_TRACE + ktrace_free(bip->bli_trace); +#endif + kmem_zone_free(xfs_buf_item_zone, bip); +} + /* * This is called when the buf log item is no longer needed. It should * free the buf log item associated with the given buffer and clear @@ -887,18 +903,8 @@ xfs_buf_item_relse( (XFS_BUF_IODONE_FUNC(bp) != NULL)) { XFS_BUF_CLR_IODONE_FUNC(bp); } - -#ifdef XFS_TRANS_DEBUG - kmem_free(bip->bli_orig); - bip->bli_orig = NULL; - kmem_free(bip->bli_logged); - bip->bli_logged = NULL; -#endif /* XFS_TRANS_DEBUG */ - -#ifdef XFS_BLI_TRACE - ktrace_free(bip->bli_trace); -#endif - kmem_zone_free(xfs_buf_item_zone, bip); + xfs_buf_rele(bp); + xfs_buf_item_free(bip); } @@ -1120,6 +1126,7 @@ xfs_buf_iodone( ASSERT(bip->bli_buf == bp); + xfs_buf_rele(bp); mp = bip->bli_item.li_mountp; /* @@ -1136,18 +1143,7 @@ xfs_buf_iodone( * xfs_trans_delete_ail() drops the AIL lock. */ xfs_trans_delete_ail(mp, (xfs_log_item_t *)bip); - -#ifdef XFS_TRANS_DEBUG - kmem_free(bip->bli_orig); - bip->bli_orig = NULL; - kmem_free(bip->bli_logged); - bip->bli_logged = NULL; -#endif /* XFS_TRANS_DEBUG */ - -#ifdef XFS_BLI_TRACE - ktrace_free(bip->bli_trace); -#endif - kmem_zone_free(xfs_buf_item_zone, bip); + xfs_buf_item_free(bip); } #if defined(XFS_BLI_TRACE) -- cgit v1.2.3 From 2fd6f6ec64ff347447d26646ac6188f3658b383c Mon Sep 17 00:00:00 2001 From: Lachlan McIlroy Date: Wed, 17 Sep 2008 16:52:50 +1000 Subject: [XFS] Don't do I/O beyond eof when unreserving space When unreserving space with boundaries that are not block aligned we round up the start and round down the end boundaries and then use this function, xfs_zero_remaining_bytes(), to zero the parts of the blocks that got dropped during the rounding. The problem is we don't consider if these blocks are beyond eof. Worse still is if we encounter delayed allocations beyond eof we will try to use the magic delayed allocation block number as a real block number. If the file size is ever extended to expose these blocks then we'll go through xfs_zero_eof() to zero them anyway. SGI-PV: 983683 SGI-Modid: xfs-linux-melb:xfs-kern:32055a Signed-off-by: Lachlan McIlroy Signed-off-by: Christoph Hellwig --- fs/xfs/xfs_vnodeops.c | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) diff --git a/fs/xfs/xfs_vnodeops.c b/fs/xfs/xfs_vnodeops.c index 98a0aecafddc..8b6812f66a15 100644 --- a/fs/xfs/xfs_vnodeops.c +++ b/fs/xfs/xfs_vnodeops.c @@ -3160,6 +3160,13 @@ error1: /* Just cancel transaction */ /* * Zero file bytes between startoff and endoff inclusive. * The iolock is held exclusive and no blocks are buffered. + * + * This function is used by xfs_free_file_space() to zero + * partial blocks when the range to free is not block aligned. + * When unreserving space with boundaries that are not block + * aligned we round up the start and round down the end + * boundaries and then use this function to zero the parts of + * the blocks that got dropped during the rounding. */ STATIC int xfs_zero_remaining_bytes( @@ -3176,6 +3183,17 @@ xfs_zero_remaining_bytes( int nimap; int error = 0; + /* + * Avoid doing I/O beyond eof - it's not necessary + * since nothing can read beyond eof. The space will + * be zeroed when the file is extended anyway. + */ + if (startoff >= ip->i_size) + return 0; + + if (endoff > ip->i_size) + endoff = ip->i_size; + bp = xfs_buf_get_noaddr(mp->m_sb.sb_blocksize, XFS_IS_REALTIME_INODE(ip) ? mp->m_rtdev_targp : mp->m_ddev_targp); -- cgit v1.2.3 From 0855f310dff76ae42c5aac32f600f8f692bbd23f Mon Sep 17 00:00:00 2001 From: Sebastian Siewior Date: Tue, 9 Sep 2008 11:17:29 +0200 Subject: UBIFS: create the name of the background thread in every case If the ubifs partition is mounted RO and then remounted RW we end up with no thread name in ubifs_remount_rw() and the thread appears nameless. Signed-off-by: Sebastian Siewior Signed-off-by: Artem Bityutskiy --- fs/ubifs/super.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/fs/ubifs/super.c b/fs/ubifs/super.c index 7562464ac83f..3f4902060c7a 100644 --- a/fs/ubifs/super.c +++ b/fs/ubifs/super.c @@ -1024,14 +1024,13 @@ static int mount_ubifs(struct ubifs_info *c) goto out_dereg; } + sprintf(c->bgt_name, BGT_NAME_PATTERN, c->vi.ubi_num, c->vi.vol_id); if (!mounted_read_only) { err = alloc_wbufs(c); if (err) goto out_cbuf; /* Create background thread */ - sprintf(c->bgt_name, BGT_NAME_PATTERN, c->vi.ubi_num, - c->vi.vol_id); c->bgt = kthread_create(ubifs_bg_thread, c, c->bgt_name); if (!c->bgt) c->bgt = ERR_PTR(-EINVAL); -- cgit v1.2.3 From 6dcfac4f13d6b32fbaa60b64a23249999e66af8e Mon Sep 17 00:00:00 2001 From: Adrian Hunter Date: Fri, 12 Sep 2008 12:27:47 +0300 Subject: UBIFS: TNC / GC race fixes - update GC sequence number if any nodes may have been moved even if GC did not finish the LEB - don't ignore error return when reading Signed-off-by: Adrian Hunter Signed-off-by: Artem Bityutskiy --- fs/ubifs/gc.c | 14 +++++++++++--- fs/ubifs/tnc.c | 2 +- 2 files changed, 12 insertions(+), 4 deletions(-) diff --git a/fs/ubifs/gc.c b/fs/ubifs/gc.c index 13f1019c859f..02aba36fe3d4 100644 --- a/fs/ubifs/gc.c +++ b/fs/ubifs/gc.c @@ -334,15 +334,15 @@ int ubifs_garbage_collect_leb(struct ubifs_info *c, struct ubifs_lprops *lp) err = move_nodes(c, sleb); if (err) - goto out; + goto out_inc_seq; err = gc_sync_wbufs(c); if (err) - goto out; + goto out_inc_seq; err = ubifs_change_one_lp(c, lnum, c->leb_size, 0, 0, 0, 0); if (err) - goto out; + goto out_inc_seq; /* Allow for races with TNC */ c->gced_lnum = lnum; @@ -369,6 +369,14 @@ int ubifs_garbage_collect_leb(struct ubifs_info *c, struct ubifs_lprops *lp) out: ubifs_scan_destroy(sleb); return err; + +out_inc_seq: + /* We may have moved at least some nodes so allow for races with TNC */ + c->gced_lnum = lnum; + smp_wmb(); + c->gc_seq += 1; + smp_wmb(); + goto out; } /** diff --git a/fs/ubifs/tnc.c b/fs/ubifs/tnc.c index 7da209ab9378..7634c5970887 100644 --- a/fs/ubifs/tnc.c +++ b/fs/ubifs/tnc.c @@ -1476,7 +1476,7 @@ again: } err = fallible_read_node(c, key, &zbr, node); - if (maybe_leb_gced(c, zbr.lnum, gc_seq1)) { + if (err <= 0 || maybe_leb_gced(c, zbr.lnum, gc_seq1)) { /* * The node may have been GC'ed out from under us so try again * while keeping the TNC mutex locked. -- cgit v1.2.3 From 6e14968c869cd30e236bb626dd0c16421d2a658d Mon Sep 17 00:00:00 2001 From: Adrian Hunter Date: Wed, 17 Sep 2008 10:52:07 +0300 Subject: UBIFS: remove incorrect assert The assert was not valid because one of the variables 'taken_empty_lebs' has transient values out of sync with the other variables. Signed-off-by: Adrian Hunter Signed-off-by: Artem Bityutskiy --- fs/ubifs/find.c | 1 - 1 file changed, 1 deletion(-) diff --git a/fs/ubifs/find.c b/fs/ubifs/find.c index e045c8b55423..47814cde2407 100644 --- a/fs/ubifs/find.c +++ b/fs/ubifs/find.c @@ -507,7 +507,6 @@ int ubifs_find_free_space(struct ubifs_info *c, int min_space, int *free, rsvd_idx_lebs = 0; lebs = c->lst.empty_lebs + c->freeable_cnt + c->idx_gc_cnt - c->lst.taken_empty_lebs; - ubifs_assert(lebs + c->lst.idx_lebs >= c->min_idx_lebs); if (rsvd_idx_lebs < lebs) /* * OK to allocate an empty LEB, but we still don't want to go -- cgit v1.2.3 From 32dde0f975e430f00f03f80f7dbab585d8b45eab Mon Sep 17 00:00:00 2001 From: Josh Boyer Date: Tue, 9 Sep 2008 04:00:28 +0000 Subject: powerpc: Holly board needs dtbImage target One of the changes in the bootwrapper makefile introduced the dtbImage targets for boards that need a simple zImage with a DTB embedded in them (595be948cce574ff2d5dde5d0426a636a4363c70, "[POWERPC] bootwrapper: Build multiple cuImages"). When this was done, it broke booting on the Holly board as the zImage.holly wrapper did not get the DTB embedded properly. This changes the target for the Holly board to a dtbImage so that the wrapper includes the vmlinux, wrapper bits, and DTB. Signed-off-by: Josh Boyer Signed-off-by: Paul Mackerras --- arch/powerpc/boot/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile index 717a3bc1352e..65d1a8454d2c 100644 --- a/arch/powerpc/boot/Makefile +++ b/arch/powerpc/boot/Makefile @@ -195,7 +195,7 @@ image-$(CONFIG_PPC_CELLEB) += zImage.pseries image-$(CONFIG_PPC_CHRP) += zImage.chrp image-$(CONFIG_PPC_EFIKA) += zImage.chrp image-$(CONFIG_PPC_PMAC) += zImage.pmac -image-$(CONFIG_PPC_HOLLY) += zImage.holly +image-$(CONFIG_PPC_HOLLY) += dtbImage.holly image-$(CONFIG_PPC_PRPMC2800) += dtbImage.prpmc2800 image-$(CONFIG_PPC_ISERIES) += zImage.iseries image-$(CONFIG_DEFAULT_UIMAGE) += uImage -- cgit v1.2.3 From 2d291e902791e1c8d72bc223b6f063bbb27a1280 Mon Sep 17 00:00:00 2001 From: James Bottomley Date: Tue, 9 Sep 2008 14:04:18 +0000 Subject: Fix compile failure with non modular builds Commit deac93df26b20cf8438339b5935b5f5643bc30c9 ("lib: Correct printk %pF to work on all architectures") broke the non modular builds by moving an essential function into modules.c. Fix this by moving it out again and into asm/sections.h as an inline. To do this, the definition of struct ppc64_opd_entry has been lifted out of modules.c and put in asm/elf.h where it belongs. Signed-off-by: James Bottomley Signed-off-by: Paul Mackerras --- arch/powerpc/include/asm/elf.h | 7 +++++++ arch/powerpc/include/asm/sections.h | 12 +++++++++++- arch/powerpc/kernel/module_64.c | 19 ------------------- 3 files changed, 18 insertions(+), 20 deletions(-) diff --git a/arch/powerpc/include/asm/elf.h b/arch/powerpc/include/asm/elf.h index 80d1f399ee51..64c6ee22eefd 100644 --- a/arch/powerpc/include/asm/elf.h +++ b/arch/powerpc/include/asm/elf.h @@ -409,6 +409,13 @@ do { \ /* Keep this the last entry. */ #define R_PPC64_NUM 107 +/* There's actually a third entry here, but it's unused */ +struct ppc64_opd_entry +{ + unsigned long funcaddr; + unsigned long r2; +}; + #ifdef __KERNEL__ #ifdef CONFIG_SPU_BASE diff --git a/arch/powerpc/include/asm/sections.h b/arch/powerpc/include/asm/sections.h index 7710e9e6660f..07956f3e7844 100644 --- a/arch/powerpc/include/asm/sections.h +++ b/arch/powerpc/include/asm/sections.h @@ -2,6 +2,8 @@ #define _ASM_POWERPC_SECTIONS_H #ifdef __KERNEL__ +#include +#include #include #ifdef __powerpc64__ @@ -17,7 +19,15 @@ static inline int in_kernel_text(unsigned long addr) } #undef dereference_function_descriptor -void *dereference_function_descriptor(void *); +static inline void *dereference_function_descriptor(void *ptr) +{ + struct ppc64_opd_entry *desc = ptr; + void *p; + + if (!probe_kernel_address(&desc->funcaddr, p)) + ptr = p; + return ptr; +} #endif diff --git a/arch/powerpc/kernel/module_64.c b/arch/powerpc/kernel/module_64.c index ad79de272ff3..1af2377e4992 100644 --- a/arch/powerpc/kernel/module_64.c +++ b/arch/powerpc/kernel/module_64.c @@ -21,9 +21,7 @@ #include #include #include -#include #include -#include #include #include #include @@ -43,13 +41,6 @@ #define DEBUGP(fmt , ...) #endif -/* There's actually a third entry here, but it's unused */ -struct ppc64_opd_entry -{ - unsigned long funcaddr; - unsigned long r2; -}; - /* Like PPC32, we need little trampolines to do > 24-bit jumps (into the kernel itself). But on PPC64, these need to be used for every jump, actually, to reset r2 (TOC+0x8000). */ @@ -452,13 +443,3 @@ int apply_relocate_add(Elf64_Shdr *sechdrs, return 0; } - -void *dereference_function_descriptor(void *ptr) -{ - struct ppc64_opd_entry *desc = ptr; - void *p; - - if (!probe_kernel_address(&desc->funcaddr, p)) - ptr = p; - return ptr; -} -- cgit v1.2.3 From 380b0fdfd0227d7604cd91ad97fb846ba643e0e7 Mon Sep 17 00:00:00 2001 From: roelkluin Date: Mon, 15 Sep 2008 20:56:44 +0100 Subject: [ARM] 5249/1: davinci: remove redundant check in davinci_psc_config() id is unsigned, check is redundant. Signed-off-by: Roel Kluin Signed-off-by: Russell King --- arch/arm/mach-davinci/psc.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/arch/arm/mach-davinci/psc.c b/arch/arm/mach-davinci/psc.c index 720c48b9ee04..aa2fc375a325 100644 --- a/arch/arm/mach-davinci/psc.c +++ b/arch/arm/mach-davinci/psc.c @@ -70,9 +70,6 @@ void davinci_psc_config(unsigned int domain, unsigned int id, char enable) { u32 epcpr, ptcmd, ptstat, pdstat, pdctl1, mdstat, mdctl, mdstat_mask; - if (id < 0) - return; - mdctl = davinci_readl(DAVINCI_PWR_SLEEP_CNTRL_BASE + MDCTL + 4 * id); if (enable) mdctl |= 0x00000003; /* Enable Module */ -- cgit v1.2.3 From 7e8bc3c6db9b4b74842b1c70bbf5c2a99a112b0d Mon Sep 17 00:00:00 2001 From: Russell King Date: Wed, 17 Sep 2008 20:58:11 +0100 Subject: [ARM] omap: back out 'internal_clock' support The structures weren't ready for this change: arch/arm/plat-omap/devices.c:320: error: 'struct omap_mmc_conf' has no member named 'internal_clock' arch/arm/plat-omap/devices.c:326: error: implicit declaration of function 'omap_ctrl_readl' arch/arm/plat-omap/devices.c:326: error: 'OMAP2_CONTROL_DEVCONF0' undeclared (first use in this function) arch/arm/plat-omap/devices.c:328: error: implicit declaration of function 'omap_ctrl_writel' Signed-off-by: Russell King --- arch/arm/plat-omap/devices.c | 13 ------------- 1 file changed, 13 deletions(-) diff --git a/arch/arm/plat-omap/devices.c b/arch/arm/plat-omap/devices.c index bc1cf30c83e0..01da719a7453 100644 --- a/arch/arm/plat-omap/devices.c +++ b/arch/arm/plat-omap/devices.c @@ -316,19 +316,6 @@ static inline void omap_init_mmc_conf(const struct omap_mmc_config *mmc_conf) omap_cfg_reg(MMC_DAT3); } } -#if defined(CONFIG_ARCH_OMAP2420) - if (mmc_conf->mmc[0].internal_clock) { - /* - * Use internal loop-back in MMC/SDIO - * Module Input Clock selection - */ - if (cpu_is_omap24xx()) { - u32 v = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0); - v |= (1 << 24); /* not used in 243x */ - omap_ctrl_writel(v, OMAP2_CONTROL_DEVCONF0); - } - } -#endif } #ifdef CONFIG_ARCH_OMAP16XX -- cgit v1.2.3 From 7424bac82ff3bd956ea04101550e01bdae17284d Mon Sep 17 00:00:00 2001 From: Alexander Beregalov Date: Wed, 17 Sep 2008 22:09:41 +0400 Subject: UBIFS: fix printk format warnings fs/ubifs/dir.c:428: warning: format '%llu' expects type 'long long unsigned int', but argument 5 has type 'long unsigned int' fs/ubifs/debug.c:541: warning: format '%llu' expects type 'long long unsigned int', but argument 2 has type 'long unsigned int' Signed-off-by: Alexander Beregalov Signed-off-by: Artem Bityutskiy --- fs/ubifs/debug.c | 2 +- fs/ubifs/dir.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/fs/ubifs/debug.c b/fs/ubifs/debug.c index b9cb77473758..d7f7645779f2 100644 --- a/fs/ubifs/debug.c +++ b/fs/ubifs/debug.c @@ -538,7 +538,7 @@ void dbg_dump_node(const struct ubifs_info *c, const void *node) printk(KERN_DEBUG "\t%d orphan inode numbers:\n", n); for (i = 0; i < n; i++) printk(KERN_DEBUG "\t ino %llu\n", - le64_to_cpu(orph->inos[i])); + (unsigned long long)le64_to_cpu(orph->inos[i])); break; } default: diff --git a/fs/ubifs/dir.c b/fs/ubifs/dir.c index 2b267c9a1806..526c01ec8003 100644 --- a/fs/ubifs/dir.c +++ b/fs/ubifs/dir.c @@ -426,7 +426,7 @@ static int ubifs_readdir(struct file *file, void *dirent, filldir_t filldir) while (1) { dbg_gen("feed '%s', ino %llu, new f_pos %#x", - dent->name, le64_to_cpu(dent->inum), + dent->name, (unsigned long long)le64_to_cpu(dent->inum), key_hash_flash(c, &dent->key)); ubifs_assert(dent->ch.sqnum > ubifs_inode(dir)->creat_sqnum); -- cgit v1.2.3 From ee2fa7435b6dddf1ca119f298ad0100cf50c0397 Mon Sep 17 00:00:00 2001 From: Joerg Roedel Date: Wed, 17 Sep 2008 13:47:25 +0200 Subject: AMD IOMMU: set iommu sunc flag after command queuing The iommu->need_sync flag must be set after the command is queued to avoid race conditions. Signed-off-by: Joerg Roedel Signed-off-by: Ingo Molnar --- arch/x86/kernel/amd_iommu.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) diff --git a/arch/x86/kernel/amd_iommu.c b/arch/x86/kernel/amd_iommu.c index 69b4d060b21c..a96d8c049a88 100644 --- a/arch/x86/kernel/amd_iommu.c +++ b/arch/x86/kernel/amd_iommu.c @@ -140,6 +140,7 @@ static int iommu_completion_wait(struct amd_iommu *iommu) static int iommu_queue_inv_dev_entry(struct amd_iommu *iommu, u16 devid) { struct iommu_cmd cmd; + int ret; BUG_ON(iommu == NULL); @@ -147,9 +148,11 @@ static int iommu_queue_inv_dev_entry(struct amd_iommu *iommu, u16 devid) CMD_SET_TYPE(&cmd, CMD_INV_DEV_ENTRY); cmd.data[0] = devid; + ret = iommu_queue_command(iommu, &cmd); + iommu->need_sync = 1; - return iommu_queue_command(iommu, &cmd); + return ret; } /* @@ -159,6 +162,7 @@ static int iommu_queue_inv_iommu_pages(struct amd_iommu *iommu, u64 address, u16 domid, int pde, int s) { struct iommu_cmd cmd; + int ret; memset(&cmd, 0, sizeof(cmd)); address &= PAGE_MASK; @@ -171,9 +175,11 @@ static int iommu_queue_inv_iommu_pages(struct amd_iommu *iommu, if (pde) /* PDE bit - we wan't flush everything not only the PTEs */ cmd.data[2] |= CMD_INV_IOMMU_PAGES_PDE_MASK; + ret = iommu_queue_command(iommu, &cmd); + iommu->need_sync = 1; - return iommu_queue_command(iommu, &cmd); + return ret; } /* -- cgit v1.2.3 From 7e4f88da7bf1887563f70bd5edbbd0479e31dc12 Mon Sep 17 00:00:00 2001 From: Joerg Roedel Date: Wed, 17 Sep 2008 14:19:15 +0200 Subject: AMD IOMMU: protect completion wait loop with iommu lock The unlocked polling of the ComWaitInt bit in the IOMMU completion wait path is racy. Protect it with the iommu lock. Signed-off-by: Joerg Roedel Signed-off-by: Ingo Molnar --- arch/x86/kernel/amd_iommu.c | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-) diff --git a/arch/x86/kernel/amd_iommu.c b/arch/x86/kernel/amd_iommu.c index a96d8c049a88..042fdc27bc92 100644 --- a/arch/x86/kernel/amd_iommu.c +++ b/arch/x86/kernel/amd_iommu.c @@ -101,10 +101,10 @@ static int iommu_queue_command(struct amd_iommu *iommu, struct iommu_cmd *cmd) */ static int iommu_completion_wait(struct amd_iommu *iommu) { - int ret, ready = 0; + int ret = 0, ready = 0; unsigned status = 0; struct iommu_cmd cmd; - unsigned long i = 0; + unsigned long flags, i = 0; memset(&cmd, 0, sizeof(cmd)); cmd.data[0] = CMD_COMPL_WAIT_INT_MASK; @@ -112,10 +112,12 @@ static int iommu_completion_wait(struct amd_iommu *iommu) iommu->need_sync = 0; - ret = iommu_queue_command(iommu, &cmd); + spin_lock_irqsave(&iommu->lock, flags); + + ret = __iommu_queue_command(iommu, &cmd); if (ret) - return ret; + goto out; while (!ready && (i < EXIT_LOOP_COUNT)) { ++i; @@ -130,6 +132,8 @@ static int iommu_completion_wait(struct amd_iommu *iommu) if (unlikely((i == EXIT_LOOP_COUNT) && printk_ratelimit())) printk(KERN_WARNING "AMD IOMMU: Completion wait loop failed\n"); +out: + spin_unlock_irqrestore(&iommu->lock, flags); return 0; } -- cgit v1.2.3 From a3028b8ed1e1e9930bfa70ce4555fb7f9fad3dcc Mon Sep 17 00:00:00 2001 From: Vlad Yasevich Date: Thu, 18 Sep 2008 02:48:25 -0700 Subject: sctp: set the skb->ip_summed correctly when sending over loopback. Loopback used to clobber the ip_summed filed which sctp then used to figure out if it needed to do checksumming or not. Now that loopback doesn't do that any more, sctp needs to set the ip_summed field correctly. Signed-off-by: Vlad Yasevich Signed-off-by: David S. Miller --- net/sctp/output.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/net/sctp/output.c b/net/sctp/output.c index 0dc4a7dfb234..225c7123c41f 100644 --- a/net/sctp/output.c +++ b/net/sctp/output.c @@ -533,7 +533,8 @@ int sctp_packet_transmit(struct sctp_packet *packet) if (!(dst->dev->features & NETIF_F_NO_CSUM)) { crc32 = sctp_start_cksum((__u8 *)sh, cksum_buf_len); crc32 = sctp_end_cksum(crc32); - } + } else + nskb->ip_summed = CHECKSUM_UNNECESSARY; /* 3) Put the resultant value into the checksum field in the * common header, and leave the rest of the bits unchanged. -- cgit v1.2.3 From 58005b325394b18b8b6a737e06b4128deb2c4e63 Mon Sep 17 00:00:00 2001 From: Kristoffer Ericson Date: Thu, 18 Sep 2008 12:19:39 +0100 Subject: [ARM] 5255/1: Update jornada ssp to remove build errors/warnings * Adds ssp functions into header so we don't get "implicit declaration" error at builtime. * Converts jornada_ssp_start/end functions into voids with proper declarations (to avoid "prototype..." warning). * Sorts include files in alphabetical order * Minor comment changes Signed-off-by: Kristoffer Ericson Signed-off-by: Russell King --- arch/arm/mach-sa1100/include/mach/jornada720.h | 11 ++++++++--- arch/arm/mach-sa1100/jornada720_ssp.c | 10 +++++----- 2 files changed, 13 insertions(+), 8 deletions(-) diff --git a/arch/arm/mach-sa1100/include/mach/jornada720.h b/arch/arm/mach-sa1100/include/mach/jornada720.h index bc120850d313..cc6b4bfcecf6 100644 --- a/arch/arm/mach-sa1100/include/mach/jornada720.h +++ b/arch/arm/mach-sa1100/include/mach/jornada720.h @@ -1,10 +1,10 @@ /* * arch/arm/mach-sa1100/include/mach/jornada720.h * - * This file contains SSP/MCU communication definitions for HP Jornada 710/720/728 + * SSP/MCU communication definitions for HP Jornada 710/720/728 * - * Copyright (C) 2007 Kristoffer Ericson - * Copyright (C) 2000 John Ankcorn + * Copyright 2007,2008 Kristoffer Ericson + * Copyright 2000 John Ankcorn * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -25,3 +25,8 @@ #define PWMOFF 0xDF #define TXDUMMY 0x11 #define ERRORCODE 0x00 + +extern void jornada_ssp_start(void); +extern void jornada_ssp_end(void); +extern int jornada_ssp_inout(u8 byte); +extern int jornada_ssp_byte(u8 byte); diff --git a/arch/arm/mach-sa1100/jornada720_ssp.c b/arch/arm/mach-sa1100/jornada720_ssp.c index 06ea7abd9170..28cf36967977 100644 --- a/arch/arm/mach-sa1100/jornada720_ssp.c +++ b/arch/arm/mach-sa1100/jornada720_ssp.c @@ -21,8 +21,8 @@ #include #include -#include #include +#include static DEFINE_SPINLOCK(jornada_ssp_lock); static unsigned long jornada_ssp_flags; @@ -109,12 +109,12 @@ EXPORT_SYMBOL(jornada_ssp_inout); * jornada_ssp_start - enable mcu * */ -int jornada_ssp_start() +void jornada_ssp_start(void) { spin_lock_irqsave(&jornada_ssp_lock, jornada_ssp_flags); GPCR = GPIO_GPIO25; udelay(50); - return 0; + return; }; EXPORT_SYMBOL(jornada_ssp_start); @@ -122,11 +122,11 @@ EXPORT_SYMBOL(jornada_ssp_start); * jornada_ssp_end - disable mcu and turn off lock * */ -int jornada_ssp_end() +void jornada_ssp_end(void) { GPSR = GPIO_GPIO25; spin_unlock_irqrestore(&jornada_ssp_lock, jornada_ssp_flags); - return 0; + return; }; EXPORT_SYMBOL(jornada_ssp_end); -- cgit v1.2.3 From 0ef46e285c062cbe35d60c0adbff96f530d31c86 Mon Sep 17 00:00:00 2001 From: Vlad Yasevich Date: Thu, 18 Sep 2008 16:27:38 -0700 Subject: sctp: do not enable peer features if we can't do them. Do not enable peer features like addip and auth, if they are administratively disabled localy. If the peer resports that he supports something that we don't, neither end can use it so enabling it is pointless. This solves a problem when talking to a peer that has auth and addip enabled while we do not. Found by Andrei Pelinescu-Onciul . Signed-off-by: Vlad Yasevich Signed-off-by: David S. Miller --- net/sctp/sm_make_chunk.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/net/sctp/sm_make_chunk.c b/net/sctp/sm_make_chunk.c index e8ca4e54981f..fe94f42fa068 100644 --- a/net/sctp/sm_make_chunk.c +++ b/net/sctp/sm_make_chunk.c @@ -1886,11 +1886,13 @@ static void sctp_process_ext_param(struct sctp_association *asoc, /* if the peer reports AUTH, assume that he * supports AUTH. */ - asoc->peer.auth_capable = 1; + if (sctp_auth_enable) + asoc->peer.auth_capable = 1; break; case SCTP_CID_ASCONF: case SCTP_CID_ASCONF_ACK: - asoc->peer.asconf_capable = 1; + if (sctp_addip_enable) + asoc->peer.asconf_capable = 1; break; default: break; @@ -2460,6 +2462,9 @@ do_addr_param: break; case SCTP_PARAM_SET_PRIMARY: + if (!sctp_addip_enable) + goto fall_through; + addr_param = param.v + sizeof(sctp_addip_param_t); af = sctp_get_af_specific(param_type2af(param.p->type)); -- cgit v1.2.3 From add52379dde2e5300e2d574b172e62c6cf43b3d3 Mon Sep 17 00:00:00 2001 From: Vlad Yasevich Date: Thu, 18 Sep 2008 16:28:27 -0700 Subject: sctp: Fix oops when INIT-ACK indicates that peer doesn't support AUTH If INIT-ACK is received with SupportedExtensions parameter which indicates that the peer does not support AUTH, the packet will be silently ignore, and sctp_process_init() do cleanup all of the transports in the association. When T1-Init timer is expires, OOPS happen while we try to choose a different init transport. The solution is to only clean up the non-active transports, i.e the ones that the peer added. However, that introduces a problem with sctp_connectx(), because we don't mark the proper state for the transports provided by the user. So, we'll simply mark user-provided transports as ACTIVE. That will allow INIT retransmissions to work properly in the sctp_connectx() context and prevent the crash. Signed-off-by: Vlad Yasevich Signed-off-by: David S. Miller --- net/sctp/associola.c | 9 +++++---- net/sctp/sm_make_chunk.c | 6 ++---- 2 files changed, 7 insertions(+), 8 deletions(-) diff --git a/net/sctp/associola.c b/net/sctp/associola.c index 8472b8b349c4..abd51cef2413 100644 --- a/net/sctp/associola.c +++ b/net/sctp/associola.c @@ -599,11 +599,12 @@ struct sctp_transport *sctp_assoc_add_peer(struct sctp_association *asoc, /* Check to see if this is a duplicate. */ peer = sctp_assoc_lookup_paddr(asoc, addr); if (peer) { + /* An UNKNOWN state is only set on transports added by + * user in sctp_connectx() call. Such transports should be + * considered CONFIRMED per RFC 4960, Section 5.4. + */ if (peer->state == SCTP_UNKNOWN) { - if (peer_state == SCTP_ACTIVE) - peer->state = SCTP_ACTIVE; - if (peer_state == SCTP_UNCONFIRMED) - peer->state = SCTP_UNCONFIRMED; + peer->state = SCTP_ACTIVE; } return peer; } diff --git a/net/sctp/sm_make_chunk.c b/net/sctp/sm_make_chunk.c index fe94f42fa068..b599cbba4fbe 100644 --- a/net/sctp/sm_make_chunk.c +++ b/net/sctp/sm_make_chunk.c @@ -2321,12 +2321,10 @@ clean_up: /* Release the transport structures. */ list_for_each_safe(pos, temp, &asoc->peer.transport_addr_list) { transport = list_entry(pos, struct sctp_transport, transports); - list_del_init(pos); - sctp_transport_free(transport); + if (transport->state != SCTP_ACTIVE) + sctp_assoc_rm_peer(asoc, transport); } - asoc->peer.transport_count = 0; - nomem: return 0; } -- cgit v1.2.3 From 27ed9ddfde8d2967076c51815e4ce297c4a18139 Mon Sep 17 00:00:00 2001 From: Benjamin Li Date: Thu, 18 Sep 2008 16:46:11 -0700 Subject: bnx2: Promote vector field in bnx2_irq structure from u16 to unsigned int The bnx2 driver stores/uses the irq value from the pci_dev internally. But when it stores the irq value, it has been performing an integer demotion. Because of the recent changes made to arch/x86/kernel/io_apic.c, the new method in creating the irq value (using build_irq_for_pci_dev()) has exposed this bug on x86 systems. Because of this demotion when calling request_irq() from bnx2_request_irq(), the driver would get a return code of -EINVAL. This is because the kernel could not find the requested irq descriptor. By storing the irq value properly, the kernel can find the correct irq descriptor and the bnx2 driver can operate normally. Signed-off-by: Benjamin Li Signed-off-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/bnx2.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/bnx2.h b/drivers/net/bnx2.h index c3c579f98ed0..dfacd31f7ed0 100644 --- a/drivers/net/bnx2.h +++ b/drivers/net/bnx2.h @@ -6597,7 +6597,7 @@ struct flash_spec { struct bnx2_irq { irq_handler_t handler; - u16 vector; + unsigned int vector; u8 requested; char name[16]; }; -- cgit v1.2.3 From f55c21fd9a92a444e55ad1ca4e4732d56661bf2e Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Sat, 13 Sep 2008 13:10:31 -0700 Subject: forcedeth: call restore mac addr in nv_shutdown path after | commit f735a2a1a4f2a0f5cd823ce323e82675990469e2 | Author: Tobias Diedrich | Date: Sun May 18 15:02:37 2008 +0200 | | [netdrvr] forcedeth: setup wake-on-lan before shutting down | | When hibernating in 'shutdown' mode, after saving the image the suspend hook | is not called again. | However, if the device is in promiscous mode, wake-on-lan will not work. | This adds a shutdown hook to setup wake-on-lan before the final shutdown. | | Signed-off-by: Tobias Diedrich | Signed-off-by: Jeff Garzik my servers with nvidia ck804 and mcp55 will reverse mac address with kexec. it turns out that we need to restore the mac addr in nv_shutdown(). [akpm@linux-foundation.org: fix typo in printk] Signed-off-by: Yinghai Lu Cc: Tobias Diedrich Cc: Ayaz Abdulla Cc: Jeff Garzik Cc: "Rafael J. Wysocki" Signed-off-by: Andrew Morton Signed-off-by: Jeff Garzik --- drivers/net/forcedeth.c | 16 +++++++++++++--- 1 file changed, 13 insertions(+), 3 deletions(-) diff --git a/drivers/net/forcedeth.c b/drivers/net/forcedeth.c index 0b6ecef9a849..eeb55ed2152d 100644 --- a/drivers/net/forcedeth.c +++ b/drivers/net/forcedeth.c @@ -5643,6 +5643,7 @@ static int __devinit nv_probe(struct pci_dev *pci_dev, const struct pci_device_i dev->dev_addr[4] = (np->orig_mac[0] >> 8) & 0xff; dev->dev_addr[5] = (np->orig_mac[0] >> 0) & 0xff; writel(txreg|NVREG_TRANSMITPOLL_MAC_ADDR_REV, base + NvRegTransmitPoll); + printk(KERN_DEBUG "nv_probe: set workaround bit for reversed mac addr\n"); } memcpy(dev->perm_addr, dev->dev_addr, dev->addr_len); @@ -5890,14 +5891,12 @@ static void nv_restore_phy(struct net_device *dev) } } -static void __devexit nv_remove(struct pci_dev *pci_dev) +static void nv_restore_mac_addr(struct pci_dev *pci_dev) { struct net_device *dev = pci_get_drvdata(pci_dev); struct fe_priv *np = netdev_priv(dev); u8 __iomem *base = get_hwbase(dev); - unregister_netdev(dev); - /* special op: write back the misordered MAC address - otherwise * the next nv_probe would see a wrong address. */ @@ -5905,6 +5904,15 @@ static void __devexit nv_remove(struct pci_dev *pci_dev) writel(np->orig_mac[1], base + NvRegMacAddrB); writel(readl(base + NvRegTransmitPoll) & ~NVREG_TRANSMITPOLL_MAC_ADDR_REV, base + NvRegTransmitPoll); +} + +static void __devexit nv_remove(struct pci_dev *pci_dev) +{ + struct net_device *dev = pci_get_drvdata(pci_dev); + + unregister_netdev(dev); + + nv_restore_mac_addr(pci_dev); /* restore any phy related changes */ nv_restore_phy(dev); @@ -5975,6 +5983,8 @@ static void nv_shutdown(struct pci_dev *pdev) if (netif_running(dev)) nv_close(dev); + nv_restore_mac_addr(pdev); + pci_disable_device(pdev); if (system_state == SYSTEM_POWER_OFF) { if (pci_enable_wake(pdev, PCI_D3cold, np->wolenabled)) -- cgit v1.2.3 From 78566fecbb12a7616ae9a88b2ffbc8062c4a89e3 Mon Sep 17 00:00:00 2001 From: Christopher Li Date: Fri, 5 Sep 2008 14:04:05 -0700 Subject: e1000: prevent corruption of EEPROM/NVM Andrey reports e1000 corruption, and that a patch in vmware's ESX fixed it. The EEPROM corruption is triggered by concurrent access of the EEPROM read/write. Putting a lock around it solve the problem. [akpm@linux-foundation.org: use DEFINE_SPINLOCK to avoid confusing lockdep] Signed-off-by: Christopher Li Reported-by: Andrey Borzenkov Cc: Zach Amsden Cc: Pratap Subrahmanyam Cc: Jeff Kirsher Cc: Jesse Brandeburg Cc: Bruce Allan Cc: PJ Waskiewicz Cc: John Ronciak Cc: Jeff Garzik Signed-off-by: Andrew Morton Signed-off-by: Jeff Garzik --- drivers/net/e1000/e1000_hw.c | 23 +++++++++++++++++++++++ 1 file changed, 23 insertions(+) diff --git a/drivers/net/e1000/e1000_hw.c b/drivers/net/e1000/e1000_hw.c index 9d6edf3e73f9..d04eef53571e 100644 --- a/drivers/net/e1000/e1000_hw.c +++ b/drivers/net/e1000/e1000_hw.c @@ -144,6 +144,8 @@ static s32 e1000_host_if_read_cookie(struct e1000_hw *hw, u8 *buffer); static u8 e1000_calculate_mng_checksum(char *buffer, u32 length); static s32 e1000_configure_kmrn_for_10_100(struct e1000_hw *hw, u16 duplex); static s32 e1000_configure_kmrn_for_1000(struct e1000_hw *hw); +static s32 e1000_do_read_eeprom(struct e1000_hw *hw, u16 offset, u16 words, u16 *data); +static s32 e1000_do_write_eeprom(struct e1000_hw *hw, u16 offset, u16 words, u16 *data); /* IGP cable length table */ static const @@ -168,6 +170,8 @@ u16 e1000_igp_2_cable_length_table[IGP02E1000_AGC_LENGTH_TABLE_SIZE] = 83, 89, 95, 100, 105, 109, 113, 116, 119, 122, 124, 104, 109, 114, 118, 121, 124}; +static DEFINE_SPINLOCK(e1000_eeprom_lock); + /****************************************************************************** * Set the phy type member in the hw struct. * @@ -4903,6 +4907,15 @@ static s32 e1000_spi_eeprom_ready(struct e1000_hw *hw) * words - number of words to read *****************************************************************************/ s32 e1000_read_eeprom(struct e1000_hw *hw, u16 offset, u16 words, u16 *data) +{ + s32 ret; + spin_lock(&e1000_eeprom_lock); + ret = e1000_do_read_eeprom(hw, offset, words, data); + spin_unlock(&e1000_eeprom_lock); + return ret; +} + +static s32 e1000_do_read_eeprom(struct e1000_hw *hw, u16 offset, u16 words, u16 *data) { struct e1000_eeprom_info *eeprom = &hw->eeprom; u32 i = 0; @@ -5235,6 +5248,16 @@ s32 e1000_update_eeprom_checksum(struct e1000_hw *hw) * EEPROM will most likely contain an invalid checksum. *****************************************************************************/ s32 e1000_write_eeprom(struct e1000_hw *hw, u16 offset, u16 words, u16 *data) +{ + s32 ret; + spin_lock(&e1000_eeprom_lock); + ret = e1000_do_write_eeprom(hw, offset, words, data); + spin_unlock(&e1000_eeprom_lock); + return ret; +} + + +static s32 e1000_do_write_eeprom(struct e1000_hw *hw, u16 offset, u16 words, u16 *data) { struct e1000_eeprom_info *eeprom = &hw->eeprom; s32 status = 0; -- cgit v1.2.3 From e7272403d2f9be3dbb7cc185fcc390e781b1af6b Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Fri, 8 Aug 2008 00:18:04 +0200 Subject: e100: Use pci_pme_active to clear PME_Status and disable PME# Currently e100 uses pci_enable_wake() to clear pending wake-up events and disable PME# during intitialization, but that function is not suitable for this purpose, because it immediately returns error code if device_may_wakeup() returns false for given device. Make e100 use pci_pme_active(), which carries out exactly the required operations, instead. Signed-off-by: Rafael J. Wysocki Signed-off-by: Jeff Garzik --- drivers/net/e100.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/drivers/net/e100.c b/drivers/net/e100.c index 453115acaad2..5cf78d612c45 100644 --- a/drivers/net/e100.c +++ b/drivers/net/e100.c @@ -2738,9 +2738,7 @@ static int __devinit e100_probe(struct pci_dev *pdev, nic->flags |= wol_magic; /* ack any pending wake events, disable PME */ - err = pci_enable_wake(pdev, 0, 0); - if (err) - DPRINTK(PROBE, ERR, "Error clearing wake event\n"); + pci_pme_active(pdev, false); strcpy(netdev->name, "eth%d"); if((err = register_netdev(netdev))) { -- cgit v1.2.3 From 9744197c3d7b329590c2be33ad7b17409bd798fe Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Fri, 19 Sep 2008 11:49:54 +1000 Subject: md: Don't wait UNINTERRUPTIBLE for other resync to finish When two md arrays share some block device (e.g each uses different partitions on the one device), a resync of one array will wait for the resync on the other to finish. This can be a long time and as it currently waits TASK_UNINTERRUPTIBLE, the softlockup code notices and complains. So use TASK_INTERRUPTIBLE instead and make sure to flush signals before calling schedule. Signed-off-by: NeilBrown --- drivers/md/md.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/drivers/md/md.c b/drivers/md/md.c index 4790c83d78d0..deeac4b44173 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -5761,7 +5761,11 @@ void md_do_sync(mddev_t *mddev) * time 'round when curr_resync == 2 */ continue; - prepare_to_wait(&resync_wait, &wq, TASK_UNINTERRUPTIBLE); + /* We need to wait 'interruptible' so as not to + * contribute to the load average, and not to + * be caught by 'softlockup' + */ + prepare_to_wait(&resync_wait, &wq, TASK_INTERRUPTIBLE); if (!kthread_should_stop() && mddev2->curr_resync >= mddev->curr_resync) { printk(KERN_INFO "md: delaying %s of %s" @@ -5769,6 +5773,8 @@ void md_do_sync(mddev_t *mddev) " share one or more physical units)\n", desc, mdname(mddev), mdname(mddev2)); mddev_put(mddev2); + if (signal_pending(current)) + flush_signals(current); schedule(); finish_wait(&resync_wait, &wq); goto try_again; -- cgit v1.2.3 From 7fb61a7b6f9111245867fa2bce47949f4298d430 Mon Sep 17 00:00:00 2001 From: Haavard Skinnemoen Date: Fri, 19 Sep 2008 17:56:54 +0200 Subject: atstk1000: fix build breakage with BOARD_ATSTK100X_SW2_CUSTOM=y The #ifdef surrounding the code adding the mmc controller had a typo, causing it to be compiled even when mmc was supposed to be disabled. Signed-off-by: Haavard Skinnemoen --- arch/avr32/boards/atstk1000/atstk1002.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/avr32/boards/atstk1000/atstk1002.c b/arch/avr32/boards/atstk1000/atstk1002.c index ee4c292683e1..dfc3443e23aa 100644 --- a/arch/avr32/boards/atstk1000/atstk1002.c +++ b/arch/avr32/boards/atstk1000/atstk1002.c @@ -325,7 +325,7 @@ static int __init atstk1002_init(void) #ifdef CONFIG_BOARD_ATSTK100X_SPI1 at32_add_device_spi(1, spi1_board_info, ARRAY_SIZE(spi1_board_info)); #endif -#ifndef CONFIG_BOARD_ATSTK1002_SW2_CUSTOM +#ifndef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM at32_add_device_mci(0, MCI_PDATA); #endif #ifdef CONFIG_BOARD_ATSTK1002_SW5_CUSTOM -- cgit v1.2.3 From 1b771c12b56fdea6c0596a69c63b097b62ce9f41 Mon Sep 17 00:00:00 2001 From: Markus Heidelberg Date: Mon, 8 Sep 2008 00:22:45 +0200 Subject: avr32: add .gitignore files Ignore Kernel binaries, kernel/vmlinux.lds and a log file. Signed-off-by: Markus Heidelberg Signed-off-by: Haavard Skinnemoen --- arch/avr32/boot/images/.gitignore | 4 ++++ arch/avr32/kernel/.gitignore | 1 + 2 files changed, 5 insertions(+) create mode 100644 arch/avr32/boot/images/.gitignore create mode 100644 arch/avr32/kernel/.gitignore diff --git a/arch/avr32/boot/images/.gitignore b/arch/avr32/boot/images/.gitignore new file mode 100644 index 000000000000..64ea9d0141d2 --- /dev/null +++ b/arch/avr32/boot/images/.gitignore @@ -0,0 +1,4 @@ +uImage +uImage.srec +vmlinux.cso +sfdwarf.log diff --git a/arch/avr32/kernel/.gitignore b/arch/avr32/kernel/.gitignore new file mode 100644 index 000000000000..c5f676c3c224 --- /dev/null +++ b/arch/avr32/kernel/.gitignore @@ -0,0 +1 @@ +vmlinux.lds -- cgit v1.2.3 From e37925ebdb9738fc7968119198c6997e79093c02 Mon Sep 17 00:00:00 2001 From: Hans-Christian Egtvedt Date: Wed, 10 Sep 2008 15:52:04 +0200 Subject: avr32: add generic_find_next_le_bit bit function This patch implements the generic_find_next_le_bit bit function for AVR32 architecture. This is used by EXT4 file system. Signed-off-by: Hans-Christian Egtvedt Signed-off-by: Haavard Skinnemoen --- arch/avr32/kernel/avr32_ksyms.c | 1 + arch/avr32/lib/findbit.S | 30 ++++++++++++++++++++++++++++++ 2 files changed, 31 insertions(+) diff --git a/arch/avr32/kernel/avr32_ksyms.c b/arch/avr32/kernel/avr32_ksyms.c index 84a7d44edc67..11e310c567a9 100644 --- a/arch/avr32/kernel/avr32_ksyms.c +++ b/arch/avr32/kernel/avr32_ksyms.c @@ -58,6 +58,7 @@ EXPORT_SYMBOL(find_first_zero_bit); EXPORT_SYMBOL(find_next_zero_bit); EXPORT_SYMBOL(find_first_bit); EXPORT_SYMBOL(find_next_bit); +EXPORT_SYMBOL(generic_find_next_le_bit); EXPORT_SYMBOL(generic_find_next_zero_le_bit); /* I/O primitives (lib/io-*.S) */ diff --git a/arch/avr32/lib/findbit.S b/arch/avr32/lib/findbit.S index c6b91dee857c..997b33b2288a 100644 --- a/arch/avr32/lib/findbit.S +++ b/arch/avr32/lib/findbit.S @@ -123,6 +123,36 @@ ENTRY(find_next_bit) brgt 1b retal r11 +ENTRY(generic_find_next_le_bit) + lsr r8, r10, 5 + sub r9, r11, r10 + retle r11 + + lsl r8, 2 + add r12, r8 + andl r10, 31, COH + breq 1f + + /* offset is not word-aligned. Handle the first (32 - r10) bits */ + ldswp.w r8, r12[0] + sub r12, -4 + lsr r8, r8, r10 + brne .L_found + + /* r9 = r9 - (32 - r10) = r9 + r10 - 32 */ + add r9, r10 + sub r9, 32 + retle r11 + + /* Main loop. offset must be word-aligned */ +1: ldswp.w r8, r12[0] + cp.w r8, 0 + brne .L_found + sub r12, -4 + sub r9, 32 + brgt 1b + retal r11 + ENTRY(generic_find_next_zero_le_bit) lsr r8, r10, 5 sub r9, r11, r10 -- cgit v1.2.3 From 73d4393d1df4ff3892b040396f101ede94e9e846 Mon Sep 17 00:00:00 2001 From: Hans-Christian Egtvedt Date: Wed, 17 Sep 2008 13:39:45 +0200 Subject: avr32: fix sys_sync_file_range() call convention On AVR32, all parameters beyond the 5th are passed on the stack. System calls don't use the stack -- they borrow a callee-saved register instead. This means that syscalls that take 6 parameters must be called through a stub that pushes the last parameter on the stack. This patch adds a stub for sync_file_range syscall on AVR32 architecture. Tested with uClibc snapshot. Signed-off-by: Hans-Christian Egtvedt Signed-off-by: Haavard Skinnemoen --- arch/avr32/kernel/syscall-stubs.S | 9 +++++++++ arch/avr32/kernel/syscall_table.S | 2 +- 2 files changed, 10 insertions(+), 1 deletion(-) diff --git a/arch/avr32/kernel/syscall-stubs.S b/arch/avr32/kernel/syscall-stubs.S index 890286a1e62b..673178e235f3 100644 --- a/arch/avr32/kernel/syscall-stubs.S +++ b/arch/avr32/kernel/syscall-stubs.S @@ -109,3 +109,12 @@ __sys_epoll_pwait: rcall sys_epoll_pwait sub sp, -4 popm pc + + .global __sys_sync_file_range + .type __sys_sync_file_range,@function +__sys_sync_file_range: + pushm lr + st.w --sp, ARG6 + rcall sys_sync_file_range + sub sp, -4 + popm pc diff --git a/arch/avr32/kernel/syscall_table.S b/arch/avr32/kernel/syscall_table.S index 478bda4c4a09..7ee0057613b3 100644 --- a/arch/avr32/kernel/syscall_table.S +++ b/arch/avr32/kernel/syscall_table.S @@ -275,7 +275,7 @@ sys_call_table: .long sys_set_robust_list .long sys_get_robust_list /* 260 */ .long __sys_splice - .long sys_sync_file_range + .long __sys_sync_file_range .long sys_tee .long sys_vmsplice .long __sys_epoll_pwait /* 265 */ -- cgit v1.2.3 From 3d431a742728e6b619ce57a030a92d228c13d1d2 Mon Sep 17 00:00:00 2001 From: Manfred Spraul Date: Wed, 20 Aug 2008 15:39:59 +0200 Subject: avr32: nmi_enter() without nmi_exit() While updating the rcu code, I noticed that do_nmi() for AVR32 is odd: There is an nmi_enter() call without an nmi_exit(). This can't be correct, it breaks rcu (at least the preempt version) and lockdep. [haavard.skinnemoen@atmel.com: fixed another case that returned directly] Signed-off-by: Haavard Skinnemoen --- arch/avr32/kernel/traps.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/avr32/kernel/traps.c b/arch/avr32/kernel/traps.c index b835c4c01368..0d987373bc01 100644 --- a/arch/avr32/kernel/traps.c +++ b/arch/avr32/kernel/traps.c @@ -116,15 +116,15 @@ asmlinkage void do_nmi(unsigned long ecr, struct pt_regs *regs) switch (ret) { case NOTIFY_OK: case NOTIFY_STOP: - return; + break; case NOTIFY_BAD: die("Fatal Non-Maskable Interrupt", regs, SIGINT); default: + printk(KERN_ALERT "Got NMI, but nobody cared. Disabling...\n"); + nmi_disable(); break; } - - printk(KERN_ALERT "Got NMI, but nobody cared. Disabling...\n"); - nmi_disable(); + nmi_exit(); } asmlinkage void do_critical_exception(unsigned long ecr, struct pt_regs *regs) -- cgit v1.2.3 From 9f7263236aa4401f8e52cae084f652175b7a7b5f Mon Sep 17 00:00:00 2001 From: Jes Sorensen Date: Fri, 12 Sep 2008 14:12:08 +0200 Subject: KVM: ia64: 'struct fdesc' build fix Commit 4611a77 ("[IA64] fix compile failure with non modular builds") introduced struct fdesc into asm/elf.h, which duplicates KVM's definition. Remove the latter to avoid the build error. Signed-off-by: Jes Sorensen Acked-by: Tony Luck Signed-off-by: Avi Kivity --- arch/ia64/kvm/kvm-ia64.c | 7 +------ 1 file changed, 1 insertion(+), 6 deletions(-) diff --git a/arch/ia64/kvm/kvm-ia64.c b/arch/ia64/kvm/kvm-ia64.c index 7a37d06376be..cd0d1a7284b7 100644 --- a/arch/ia64/kvm/kvm-ia64.c +++ b/arch/ia64/kvm/kvm-ia64.c @@ -38,6 +38,7 @@ #include #include #include +#include #include "misc.h" #include "vti.h" @@ -61,12 +62,6 @@ struct kvm_stats_debugfs_item debugfs_entries[] = { { NULL } }; - -struct fdesc{ - unsigned long ip; - unsigned long gp; -}; - static void kvm_flush_icache(unsigned long start, unsigned long len) { int l; -- cgit v1.2.3 From 13b3c3fa27f8f4ed306ce624f446fab000dd8ee4 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Sat, 20 Sep 2008 10:25:19 +0200 Subject: hwmon: (atxp1) Fix device detection logic The atxp1 device detection code has a major logic flaw, fix it. Not sure how we managed to miss this when the driver was merged... Signed-off-by: Jean Delvare Acked-by: Sebastian Witt --- drivers/hwmon/atxp1.c | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) diff --git a/drivers/hwmon/atxp1.c b/drivers/hwmon/atxp1.c index d191118ba0cb..d6b490d3e36f 100644 --- a/drivers/hwmon/atxp1.c +++ b/drivers/hwmon/atxp1.c @@ -31,7 +31,7 @@ MODULE_LICENSE("GPL"); MODULE_DESCRIPTION("System voltages control via Attansic ATXP1"); -MODULE_VERSION("0.6.2"); +MODULE_VERSION("0.6.3"); MODULE_AUTHOR("Sebastian Witt "); #define ATXP1_VID 0x00 @@ -289,16 +289,16 @@ static int atxp1_detect(struct i2c_client *new_client, int kind, if (!((i2c_smbus_read_byte_data(new_client, 0x3e) == 0) && (i2c_smbus_read_byte_data(new_client, 0x3f) == 0) && (i2c_smbus_read_byte_data(new_client, 0xfe) == 0) && - (i2c_smbus_read_byte_data(new_client, 0xff) == 0) )) { + (i2c_smbus_read_byte_data(new_client, 0xff) == 0))) + return -ENODEV; - /* No vendor ID, now checking if registers 0x10,0x11 (non-existent) - * showing the same as register 0x00 */ - temp = i2c_smbus_read_byte_data(new_client, 0x00); + /* No vendor ID, now checking if registers 0x10,0x11 (non-existent) + * showing the same as register 0x00 */ + temp = i2c_smbus_read_byte_data(new_client, 0x00); - if (!((i2c_smbus_read_byte_data(new_client, 0x10) == temp) && - (i2c_smbus_read_byte_data(new_client, 0x11) == temp) )) - return -ENODEV; - } + if (!((i2c_smbus_read_byte_data(new_client, 0x10) == temp) && + (i2c_smbus_read_byte_data(new_client, 0x11) == temp))) + return -ENODEV; /* Get VRM */ temp = vid_which_vrm(); -- cgit v1.2.3 From 859b9ef30cc1bdba4b55327b95b22489bd5591c2 Mon Sep 17 00:00:00 2001 From: Andrew Paprocki Date: Sat, 20 Sep 2008 10:25:19 +0200 Subject: hwmon: (it87) Fix fan tachometer reading in IT8712F rev 0x7 (I) The IT8712F v0.9.1 datasheet applies to revisions >= 0x8 (J). The driver was incorrectly attempting to enable 16-bit fan readings on rev 0x7 (I) which led to incorrect RPM values. Signed-off-by: Andrew Paprocki Tested-by: John Gumb Signed-off-by: Jean Delvare --- drivers/hwmon/it87.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/hwmon/it87.c b/drivers/hwmon/it87.c index 30cdb0956779..f1133081cc42 100644 --- a/drivers/hwmon/it87.c +++ b/drivers/hwmon/it87.c @@ -273,10 +273,10 @@ struct it87_data { static inline int has_16bit_fans(const struct it87_data *data) { /* IT8705F Datasheet 0.4.1, 3h == Version G. - IT8712F Datasheet 0.9.1, section 8.3.5 indicates 7h == Version I. + IT8712F Datasheet 0.9.1, section 8.3.5 indicates 8h == Version J. These are the first revisions with 16bit tachometer support. */ return (data->type == it87 && data->revision >= 0x03) - || (data->type == it8712 && data->revision >= 0x07) + || (data->type == it8712 && data->revision >= 0x08) || data->type == it8716 || data->type == it8718; } -- cgit v1.2.3 From d130d97154f5342973a0fffc0b5a144359273c79 Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Sat, 20 Sep 2008 10:25:20 +0200 Subject: hwmon: (ad7414) Make ad7414_update_device() static This patch makes the needlessly global ad7414_update_device() static. Signed-off-by: Adrian Bunk Acked-by: Sean MacLennan Signed-off-by: Jean Delvare --- drivers/hwmon/ad7414.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/hwmon/ad7414.c b/drivers/hwmon/ad7414.c index ce8d94fbfd7e..bfda8c80ef24 100644 --- a/drivers/hwmon/ad7414.c +++ b/drivers/hwmon/ad7414.c @@ -69,7 +69,7 @@ static inline int ad7414_write(struct i2c_client *client, u8 reg, u8 value) return i2c_smbus_write_byte_data(client, reg, value); } -struct ad7414_data *ad7414_update_device(struct device *dev) +static struct ad7414_data *ad7414_update_device(struct device *dev) { struct i2c_client *client = to_i2c_client(dev); struct ad7414_data *data = i2c_get_clientdata(client); -- cgit v1.2.3 From fe246eb0b7f2e995c4f172f360bc4e86baccaafe Mon Sep 17 00:00:00 2001 From: Dmitry Baryshkov Date: Wed, 3 Sep 2008 19:33:30 +0400 Subject: tmio_mmc: fix compilation with debug enabled Signed-off-by: Dmitry Baryshkov Acked-by: Ian Molton Signed-off-by: Pierre Ossman --- drivers/mmc/host/tmio_mmc.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/mmc/host/tmio_mmc.h b/drivers/mmc/host/tmio_mmc.h index 9e647a06054f..ba2b4240a86a 100644 --- a/drivers/mmc/host/tmio_mmc.h +++ b/drivers/mmc/host/tmio_mmc.h @@ -159,10 +159,10 @@ static inline void tmio_mmc_kunmap_atomic(struct tmio_mmc_host *host, #define STATUS_TO_TEXT(a) \ do { \ if (status & TMIO_STAT_##a) \ - printf(#a); \ + printk(#a); \ } while (0) -void debug_status(u32 status) +void pr_debug_status(u32 status) { printk(KERN_DEBUG "status: %08x = ", status); STATUS_TO_TEXT(CARD_REMOVE); -- cgit v1.2.3 From 87e60f2b80202575a23fa1bf56c6eb3b419c480a Mon Sep 17 00:00:00 2001 From: Haavard Skinnemoen Date: Fri, 19 Sep 2008 21:09:27 +0200 Subject: atmel-mci: debugfs: enable clock before dumping regs Make sure that the peripheral clock is enabled before reading the MMIO registers for the debugfs "regs" dump. Signed-off-by: Haavard Skinnemoen Signed-off-by: Pierre Ossman --- drivers/mmc/host/atmel-mci.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c index 0bd06f5bd62f..6de773d3a0cf 100644 --- a/drivers/mmc/host/atmel-mci.c +++ b/drivers/mmc/host/atmel-mci.c @@ -195,7 +195,9 @@ static int atmci_regs_show(struct seq_file *s, void *v) /* Grab a more or less consistent snapshot */ spin_lock_irq(&host->mmc->lock); + clk_enable(host->mck); memcpy_fromio(buf, host->regs, MCI_REGS_SIZE); + clk_disable(host->mck); spin_unlock_irq(&host->mmc->lock); seq_printf(s, "MR:\t0x%08x%s%s CLKDIV=%u\n", -- cgit v1.2.3 From b17339a12c279d73869c74a37642035cd2f896f8 Mon Sep 17 00:00:00 2001 From: Haavard Skinnemoen Date: Fri, 19 Sep 2008 21:09:28 +0200 Subject: atmel-mci: Fix memory leak in atmci_regs_show The debugfs hook atmci_regs_show allocates a temporary buffer for storing a register snapshot, but it doesn't free it before returning. Plug this leak. Signed-off-by: Haavard Skinnemoen Signed-off-by: Pierre Ossman --- drivers/mmc/host/atmel-mci.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c index 6de773d3a0cf..becca9145070 100644 --- a/drivers/mmc/host/atmel-mci.c +++ b/drivers/mmc/host/atmel-mci.c @@ -218,6 +218,8 @@ static int atmci_regs_show(struct seq_file *s, void *v) atmci_show_status_reg(s, "SR", buf[MCI_SR / 4]); atmci_show_status_reg(s, "IMR", buf[MCI_IMR / 4]); + kfree(buf); + return 0; } -- cgit v1.2.3 From 75d33cc751214f8388d58fca3ef6d1df786b5861 Mon Sep 17 00:00:00 2001 From: Haavard Skinnemoen Date: Fri, 19 Sep 2008 21:09:29 +0200 Subject: atmel-mci: Fix bogus debugfs file size We used to store a binary register snapshot in the "regs" file, so we set the file size to be the size of this snapshot. This is no longer valid since we switched to using seq_file. Signed-off-by: Haavard Skinnemoen Signed-off-by: Pierre Ossman --- drivers/mmc/host/atmel-mci.c | 4 ---- 1 file changed, 4 deletions(-) diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c index becca9145070..39096083bb61 100644 --- a/drivers/mmc/host/atmel-mci.c +++ b/drivers/mmc/host/atmel-mci.c @@ -241,7 +241,6 @@ static void atmci_init_debugfs(struct atmel_mci *host) struct mmc_host *mmc; struct dentry *root; struct dentry *node; - struct resource *res; mmc = host->mmc; root = mmc->debugfs_root; @@ -255,9 +254,6 @@ static void atmci_init_debugfs(struct atmel_mci *host) if (!node) goto err; - res = platform_get_resource(host->pdev, IORESOURCE_MEM, 0); - node->d_inode->i_size = res->end - res->start + 1; - node = debugfs_create_file("req", S_IRUSR, root, host, &atmci_req_fops); if (!node) goto err; -- cgit v1.2.3 From da45b66ec89bbf3a1c172688c35d4d3a6e8e757f Mon Sep 17 00:00:00 2001 From: Haavard Skinnemoen Date: Fri, 19 Sep 2008 21:09:30 +0200 Subject: atmel-mci: Set MMC_CAP_NEEDS_POLL if no detect_pin This allows the mmc core to detect card insertion/removal for slots that don't have any CD pin wired up. Signed-off-by: Haavard Skinnemoen Signed-off-by: Pierre Ossman --- drivers/mmc/host/atmel-mci.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c index 39096083bb61..917035e16da4 100644 --- a/drivers/mmc/host/atmel-mci.c +++ b/drivers/mmc/host/atmel-mci.c @@ -1059,6 +1059,10 @@ static int __init atmci_probe(struct platform_device *pdev) host->present = !gpio_get_value(host->detect_pin); } } + + if (!gpio_is_valid(host->detect_pin)) + mmc->caps |= MMC_CAP_NEEDS_POLL; + if (gpio_is_valid(host->wp_pin)) { if (gpio_request(host->wp_pin, "mmc_wp")) { dev_dbg(&mmc->class_dev, "no WP pin available\n"); -- cgit v1.2.3 From 9d4e98e9609bc19d4a8ac4a5c3218358d1820114 Mon Sep 17 00:00:00 2001 From: Akinobu Mita Date: Sat, 13 Sep 2008 19:02:07 +0900 Subject: mmc_block: handle error from mmc_register_driver() Check error from mmc_register_driver() and properly unwind block device registration. Signed-off-by: Akinobu Mita Signed-off-by: Pierre Ossman --- drivers/mmc/card/block.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/drivers/mmc/card/block.c b/drivers/mmc/card/block.c index 86dbb366415a..43d9a5b53e8d 100644 --- a/drivers/mmc/card/block.c +++ b/drivers/mmc/card/block.c @@ -613,14 +613,19 @@ static struct mmc_driver mmc_driver = { static int __init mmc_blk_init(void) { - int res = -ENOMEM; + int res; res = register_blkdev(MMC_BLOCK_MAJOR, "mmc"); if (res) goto out; - return mmc_register_driver(&mmc_driver); + res = mmc_register_driver(&mmc_driver); + if (res) + goto out2; + return 0; + out2: + unregister_blkdev(MMC_BLOCK_MAJOR, "mmc"); out: return res; } -- cgit v1.2.3 From a650031a6bd16cb6789da9b3c27fc97341239f12 Mon Sep 17 00:00:00 2001 From: Akinobu Mita Date: Sat, 13 Sep 2008 19:03:32 +0900 Subject: mmc_test: initialize mmc_test_lock statically The mutex mmc_test_lock is initialized at every time mmc_test device is probed. Probing another mmc_test device may break the mutex, if the probe function is called while the mutex is locked. This patch fixes it by statically initializing mmc_test_lock. Signed-off-by: Akinobu Mita Signed-off-by: Pierre Ossman --- drivers/mmc/card/mmc_test.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/drivers/mmc/card/mmc_test.c b/drivers/mmc/card/mmc_test.c index f26b01d811ae..b92b172074ee 100644 --- a/drivers/mmc/card/mmc_test.c +++ b/drivers/mmc/card/mmc_test.c @@ -1040,7 +1040,7 @@ static const struct mmc_test_case mmc_test_cases[] = { }; -static struct mutex mmc_test_lock; +static DEFINE_MUTEX(mmc_test_lock); static void mmc_test_run(struct mmc_test_card *test, int testcase) { @@ -1171,8 +1171,6 @@ static int mmc_test_probe(struct mmc_card *card) if ((card->type != MMC_TYPE_MMC) && (card->type != MMC_TYPE_SD)) return -ENODEV; - mutex_init(&mmc_test_lock); - ret = device_create_file(&card->dev, &dev_attr_test); if (ret) return ret; -- cgit v1.2.3 From 7ee766d8fba9dfd93bf3eca7a8d84a25404a68dc Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Sat, 20 Sep 2008 22:00:40 -0700 Subject: sparc64: Fix disappearing PCI devices on e3500. Based upon a bug report by Meelis Roos. The OF device layer builds properties by matching bus types and applying 'range' properties as appropriate, up to the root. The match for "PCI" busses is looking at the 'device_type' property, and this does work %99 of the time. But on an E3500 system with a PCI QFE card, the DEC 21153 bridge sitting above the QFE network interface devices has a 'name' of "pci", but it completely lacks a 'device_type' property. So we don't match it as a PCI bus, and subsequently we end up with no resource values at all for the devices sitting under that DEC bridge. Signed-off-by: David S. Miller --- arch/sparc64/kernel/of_device.c | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-) diff --git a/arch/sparc64/kernel/of_device.c b/arch/sparc64/kernel/of_device.c index f845f150f565..100ebd527499 100644 --- a/arch/sparc64/kernel/of_device.c +++ b/arch/sparc64/kernel/of_device.c @@ -169,7 +169,7 @@ static unsigned long of_bus_default_get_flags(const u32 *addr, unsigned long fla static int of_bus_pci_match(struct device_node *np) { - if (!strcmp(np->type, "pci") || !strcmp(np->type, "pciex")) { + if (!strcmp(np->name, "pci")) { const char *model = of_get_property(np, "model", NULL); if (model && !strcmp(model, "SUNW,simba")) @@ -200,7 +200,7 @@ static int of_bus_simba_match(struct device_node *np) /* Treat PCI busses lacking ranges property just like * simba. */ - if (!strcmp(np->type, "pci") || !strcmp(np->type, "pciex")) { + if (!strcmp(np->name, "pci")) { if (!of_find_property(np, "ranges", NULL)) return 1; } @@ -429,7 +429,7 @@ static int __init use_1to1_mapping(struct device_node *pp) * it lacks a ranges property, and this will include * cases like Simba. */ - if (!strcmp(pp->type, "pci") || !strcmp(pp->type, "pciex")) + if (!strcmp(pp->name, "pci")) return 0; return 1; @@ -714,8 +714,7 @@ static unsigned int __init build_one_device_irq(struct of_device *op, break; } } else { - if (!strcmp(pp->type, "pci") || - !strcmp(pp->type, "pciex")) { + if (!strcmp(pp->name, "pci")) { unsigned int this_orig_irq = irq; irq = pci_irq_swizzle(dp, pp, irq); -- cgit v1.2.3 From ad55dcaff0e34269f86975ce2ea0da22e9eb74a1 Mon Sep 17 00:00:00 2001 From: Alexander Duyck Date: Sat, 20 Sep 2008 22:05:50 -0700 Subject: netdev: simple_tx_hash shouldn't hash inside fragments Currently simple_tx_hash is hashing inside of udp fragments. As a result packets are getting getting sent to all queues when they shouldn't be. This causes a serious performance regression which can be seen by sending UDP frames larger than mtu on multiqueue devices. This change will make it so that fragments are hashed only as IP datagrams w/o any protocol information. Signed-off-by: Alexander Duyck Signed-off-by: David S. Miller --- net/core/dev.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/net/core/dev.c b/net/core/dev.c index e719ed29310f..e8eb2b478344 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -122,6 +122,7 @@ #include #include #include +#include #include #include #include @@ -1667,7 +1668,7 @@ static u16 simple_tx_hash(struct net_device *dev, struct sk_buff *skb) { u32 addr1, addr2, ports; u32 hash, ihl; - u8 ip_proto; + u8 ip_proto = 0; if (unlikely(!simple_tx_hashrnd_initialized)) { get_random_bytes(&simple_tx_hashrnd, 4); @@ -1676,7 +1677,8 @@ static u16 simple_tx_hash(struct net_device *dev, struct sk_buff *skb) switch (skb->protocol) { case __constant_htons(ETH_P_IP): - ip_proto = ip_hdr(skb)->protocol; + if (!(ip_hdr(skb)->frag_off & htons(IP_MF | IP_OFFSET))) + ip_proto = ip_hdr(skb)->protocol; addr1 = ip_hdr(skb)->saddr; addr2 = ip_hdr(skb)->daddr; ihl = ip_hdr(skb)->ihl; -- cgit v1.2.3 From b80a1b80818cd83c6c2109081b43551e7af72c84 Mon Sep 17 00:00:00 2001 From: Atsushi Nemoto Date: Sat, 20 Sep 2008 17:20:04 +0200 Subject: [MIPS] Fix 64-bit IP checksum code Use unsigned loads to avoid possible misscalculation of IP checksums. This bug was instruced in f761106cd728bcf65b7fe161b10221ee00cf7132 (lmo) / ed99e2bc1dc5dc54eb5a019f4975562dbef20103 (kernel.org). [Original fix by Atsushi. Improved instruction scheduling and fix for unaligned unsigned load by me -- Ralf] Signed-off-by: Atsushi Nemoto Signed-off-by: Ralf Baechle --- arch/mips/lib/csum_partial.S | 21 +++++++++++++++++---- 1 file changed, 17 insertions(+), 4 deletions(-) diff --git a/arch/mips/lib/csum_partial.S b/arch/mips/lib/csum_partial.S index 8d7784122c14..edac9892c51a 100644 --- a/arch/mips/lib/csum_partial.S +++ b/arch/mips/lib/csum_partial.S @@ -39,12 +39,14 @@ #ifdef USE_DOUBLE #define LOAD ld +#define LOAD32 lwu #define ADD daddu #define NBYTES 8 #else #define LOAD lw +#define LOAD32 lw #define ADD addu #define NBYTES 4 @@ -60,6 +62,14 @@ ADD sum, v1; \ .set pop +#define ADDC32(sum,reg) \ + .set push; \ + .set noat; \ + addu sum, reg; \ + sltu v1, sum, reg; \ + addu sum, v1; \ + .set pop + #define CSUM_BIGCHUNK1(src, offset, sum, _t0, _t1, _t2, _t3) \ LOAD _t0, (offset + UNIT(0))(src); \ LOAD _t1, (offset + UNIT(1))(src); \ @@ -132,7 +142,7 @@ LEAF(csum_partial) beqz t8, .Lqword_align andi t8, src, 0x8 - lw t0, 0x00(src) + LOAD32 t0, 0x00(src) LONG_SUBU a1, a1, 0x4 ADDC(sum, t0) PTR_ADDU src, src, 0x4 @@ -211,7 +221,7 @@ LEAF(csum_partial) LONG_SRL t8, t8, 0x2 .Lend_words: - lw t0, (src) + LOAD32 t0, (src) LONG_SUBU t8, t8, 0x1 ADDC(sum, t0) .set reorder /* DADDI_WAR */ @@ -230,6 +240,9 @@ LEAF(csum_partial) /* Still a full word to go */ ulw t1, (src) PTR_ADDIU src, 4 +#ifdef USE_DOUBLE + dsll t1, t1, 32 /* clear lower 32bit */ +#endif ADDC(sum, t1) 1: move t1, zero @@ -280,7 +293,7 @@ LEAF(csum_partial) 1: .set reorder /* Add the passed partial csum. */ - ADDC(sum, a2) + ADDC32(sum, a2) jr ra .set noreorder END(csum_partial) @@ -681,7 +694,7 @@ EXC( sb t0, NBYTES-2(dst), .Ls_exc) .set pop 1: .set reorder - ADDC(sum, psum) + ADDC32(sum, psum) jr ra .set noreorder -- cgit v1.2.3 From 6657fe0a0281e06ff46eb42bc18ecb68d8b14b27 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Tue, 9 Sep 2008 15:19:10 +0200 Subject: [MIPS] SMTC: Clear TIF_FPUBOUND on clone / fork. Signed-off-by: Ralf Baechle --- arch/mips/kernel/process.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/mips/kernel/process.c b/arch/mips/kernel/process.c index b16facd9ea8e..ce7684335a41 100644 --- a/arch/mips/kernel/process.c +++ b/arch/mips/kernel/process.c @@ -148,6 +148,8 @@ int copy_thread(int nr, unsigned long clone_flags, unsigned long usp, clear_tsk_thread_flag(p, TIF_USEDFPU); #ifdef CONFIG_MIPS_MT_FPAFF + clear_tsk_thread_flag(p, TIF_FPUBOUND); + /* * FPU affinity support is cleaner if we track the * user-visible CPU affinity from the very beginning. -- cgit v1.2.3 From c65a5480ff29198c241f11d39d9e34ab22c72c69 Mon Sep 17 00:00:00 2001 From: Atsushi Nemoto Date: Mon, 12 Nov 2007 02:05:18 +0900 Subject: [MIPS] Fix potential latency problem due to non-atomic cpu_wait. If an interrupt happened between checking of NEED_RESCHED and WAIT instruction, adjust EPC to restart from checking of NEED_RESCHED. Signed-off-by: Atsushi Nemoto Signed-off-by: Ralf Baechle --- arch/mips/kernel/cpu-probe.c | 16 ++-------------- arch/mips/kernel/genex.S | 37 +++++++++++++++++++++++++++++++++++++ arch/mips/kernel/traps.c | 22 ++++++++++++++++------ 3 files changed, 55 insertions(+), 20 deletions(-) diff --git a/arch/mips/kernel/cpu-probe.c b/arch/mips/kernel/cpu-probe.c index 335a6ae3d594..11c92dc53791 100644 --- a/arch/mips/kernel/cpu-probe.c +++ b/arch/mips/kernel/cpu-probe.c @@ -45,18 +45,7 @@ static void r39xx_wait(void) local_irq_enable(); } -/* - * There is a race when WAIT instruction executed with interrupt - * enabled. - * But it is implementation-dependent wheter the pipelie restarts when - * a non-enabled interrupt is requested. - */ -static void r4k_wait(void) -{ - __asm__(" .set mips3 \n" - " wait \n" - " .set mips0 \n"); -} +extern void r4k_wait(void); /* * This variant is preferable as it allows testing need_resched and going to @@ -128,7 +117,7 @@ static int __init wait_disable(char *s) __setup("nowait", wait_disable); -static inline void check_wait(void) +void __init check_wait(void) { struct cpuinfo_mips *c = ¤t_cpu_data; @@ -242,7 +231,6 @@ static inline void check_errata(void) void __init check_bugs32(void) { - check_wait(); check_errata(); } diff --git a/arch/mips/kernel/genex.S b/arch/mips/kernel/genex.S index c6ada98ee042..f886dd7f708e 100644 --- a/arch/mips/kernel/genex.S +++ b/arch/mips/kernel/genex.S @@ -20,6 +20,7 @@ #include #include #include +#include #define PANIC_PIC(msg) \ .set push; \ @@ -126,7 +127,42 @@ handle_vcei: __FINIT + .align 5 /* 32 byte rollback region */ +LEAF(r4k_wait) + .set push + .set noreorder + /* start of rollback region */ + LONG_L t0, TI_FLAGS($28) + nop + andi t0, _TIF_NEED_RESCHED + bnez t0, 1f + nop + nop + nop + .set mips3 + wait + /* end of rollback region (the region size must be power of two) */ + .set pop +1: + jr ra + END(r4k_wait) + + .macro BUILD_ROLLBACK_PROLOGUE handler + FEXPORT(rollback_\handler) + .set push + .set noat + MFC0 k0, CP0_EPC + PTR_LA k1, r4k_wait + ori k0, 0x1f /* 32 byte rollback region */ + xori k0, 0x1f + bne k0, k1, 9f + MTC0 k0, CP0_EPC +9: + .set pop + .endm + .align 5 +BUILD_ROLLBACK_PROLOGUE handle_int NESTED(handle_int, PT_SIZE, sp) #ifdef CONFIG_TRACE_IRQFLAGS /* @@ -201,6 +237,7 @@ NESTED(except_vec_ejtag_debug, 0, sp) * This prototype is copied to ebase + n*IntCtl.VS and patched * to invoke the handler */ +BUILD_ROLLBACK_PROLOGUE except_vec_vi NESTED(except_vec_vi, 0, sp) SAVE_SOME SAVE_AT diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c index 6bee29097a56..5fd0cd020af5 100644 --- a/arch/mips/kernel/traps.c +++ b/arch/mips/kernel/traps.c @@ -46,6 +46,9 @@ #include #include +extern void check_wait(void); +extern asmlinkage void r4k_wait(void); +extern asmlinkage void rollback_handle_int(void); extern asmlinkage void handle_int(void); extern asmlinkage void handle_tlbm(void); extern asmlinkage void handle_tlbl(void); @@ -1251,6 +1254,9 @@ static void *set_vi_srs_handler(int n, vi_handler_t addr, int srs) extern char except_vec_vi, except_vec_vi_lui; extern char except_vec_vi_ori, except_vec_vi_end; + extern char rollback_except_vec_vi; + char *vec_start = (cpu_wait == r4k_wait) ? + &rollback_except_vec_vi : &except_vec_vi; #ifdef CONFIG_MIPS_MT_SMTC /* * We need to provide the SMTC vectored interrupt handler @@ -1258,11 +1264,11 @@ static void *set_vi_srs_handler(int n, vi_handler_t addr, int srs) * Status.IM bit to be masked before going there. */ extern char except_vec_vi_mori; - const int mori_offset = &except_vec_vi_mori - &except_vec_vi; + const int mori_offset = &except_vec_vi_mori - vec_start; #endif /* CONFIG_MIPS_MT_SMTC */ - const int handler_len = &except_vec_vi_end - &except_vec_vi; - const int lui_offset = &except_vec_vi_lui - &except_vec_vi; - const int ori_offset = &except_vec_vi_ori - &except_vec_vi; + const int handler_len = &except_vec_vi_end - vec_start; + const int lui_offset = &except_vec_vi_lui - vec_start; + const int ori_offset = &except_vec_vi_ori - vec_start; if (handler_len > VECTORSPACING) { /* @@ -1272,7 +1278,7 @@ static void *set_vi_srs_handler(int n, vi_handler_t addr, int srs) panic("VECTORSPACING too small"); } - memcpy(b, &except_vec_vi, handler_len); + memcpy(b, vec_start, handler_len); #ifdef CONFIG_MIPS_MT_SMTC BUG_ON(n > 7); /* Vector index %d exceeds SMTC maximum. */ @@ -1554,6 +1560,10 @@ void __init trap_init(void) extern char except_vec3_generic, except_vec3_r4000; extern char except_vec4; unsigned long i; + int rollback; + + check_wait(); + rollback = (cpu_wait == r4k_wait); #if defined(CONFIG_KGDB) if (kgdb_early_setup) @@ -1618,7 +1628,7 @@ void __init trap_init(void) if (board_be_init) board_be_init(); - set_except_vector(0, handle_int); + set_except_vector(0, rollback ? rollback_handle_int : handle_int); set_except_vector(1, handle_tlbm); set_except_vector(2, handle_tlbl); set_except_vector(3, handle_tlbs); -- cgit v1.2.3 From 6b3766a263a62fc82ca0457faa73dc34b98ceb87 Mon Sep 17 00:00:00 2001 From: Atsushi Nemoto Date: Tue, 5 Aug 2008 23:45:14 +0900 Subject: [MIPS] vmlinux.lds.S: handle .text.* The -ffunction-sections puts each text in .text.function_name section. Without this patch, most functions are placed outside _text..._etext area and it breaks show_stacktrace(), etc. Signed-off-by: Atsushi Nemoto Signed-off-by: Ralf Baechle --- arch/mips/kernel/vmlinux.lds.S | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/mips/kernel/vmlinux.lds.S b/arch/mips/kernel/vmlinux.lds.S index b5470ceb418b..afb119f35682 100644 --- a/arch/mips/kernel/vmlinux.lds.S +++ b/arch/mips/kernel/vmlinux.lds.S @@ -36,6 +36,7 @@ SECTIONS SCHED_TEXT LOCK_TEXT KPROBES_TEXT + *(.text.*) *(.fixup) *(.gnu.warning) } :text = 0 -- cgit v1.2.3 From 795fb7e74dff04f661b61eccd3c48554b7d1f747 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Sat, 20 Sep 2008 12:33:08 +0200 Subject: MAINTAINERS: Trivial whitespace cleanups * Drop trailing whitespace. * Replace spaces and combinations of spaces and tabs by single tabs. Signed-off-by: Jean Delvare Signed-off-by: Linus Torvalds --- MAINTAINERS | 162 ++++++++++++++++++++++++++++++------------------------------ 1 file changed, 81 insertions(+), 81 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index 0a613cb926c6..85cfd4d2ff49 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -271,20 +271,20 @@ W: http://www.lesswatts.org/projects/acpi/ S: Supported ACPI WMI DRIVER -P: Carlos Corbacho -M: carlos@strangeworlds.co.uk -L: linux-acpi@vger.kernel.org -W: http://www.lesswatts.org/projects/acpi/ -S: Maintained +P: Carlos Corbacho +M: carlos@strangeworlds.co.uk +L: linux-acpi@vger.kernel.org +W: http://www.lesswatts.org/projects/acpi/ +S: Maintained AD1889 ALSA SOUND DRIVER -P: Kyle McMartin -M: kyle@mcmartin.ca -P: Thibaut Varene -M: T-Bone@parisc-linux.org -W: http://wiki.parisc-linux.org/AD1889 -L: linux-parisc@vger.kernel.org -S: Maintained +P: Kyle McMartin +M: kyle@mcmartin.ca +P: Thibaut Varene +M: T-Bone@parisc-linux.org +W: http://wiki.parisc-linux.org/AD1889 +L: linux-parisc@vger.kernel.org +S: Maintained ADM1025 HARDWARE MONITOR DRIVER P: Jean Delvare @@ -473,11 +473,11 @@ L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only) S: Maintained ARM/ATMEL AT91RM9200 ARM ARCHITECTURE -P: Andrew Victor -M: linux@maxim.org.za -L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only) -W: http://maxim.org.za/at91_26.html -S: Maintained +P: Andrew Victor +M: linux@maxim.org.za +L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only) +W: http://maxim.org.za/at91_26.html +S: Maintained ARM/CIRRUS LOGIC EP93XX ARM ARCHITECTURE P: Lennert Buytenhek @@ -532,10 +532,10 @@ L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only) S: Maintained ARM/HP JORNADA 7XX MACHINE SUPPORT -P: Kristoffer Ericson -M: kristoffer.ericson@gmail.com -W: www.jlime.com -S: Maintained +P: Kristoffer Ericson +M: kristoffer.ericson@gmail.com +W: www.jlime.com +S: Maintained ARM/INTEL IOP32X ARM ARCHITECTURE P: Lennert Buytenhek @@ -1017,7 +1017,7 @@ T: git kernel.org:/pub/scm/linux/kernel/git/mchehab/v4l-dvb.git S: Maintained CAFE CMOS INTEGRATED CAMERA CONTROLLER DRIVER -P: Jonathan Corbet +P: Jonathan Corbet M: corbet@lwn.net L: video4linux-list@redhat.com S: Maintained @@ -1423,12 +1423,12 @@ L: linux-acpi@vger.kernel.org S: Supported DOCUMENTATION (/Documentation directory) -P: Michael Kerrisk -M: mtk.manpages@gmail.com -P: Randy Dunlap -M: rdunlap@xenotime.net -L: linux-doc@vger.kernel.org -S: Maintained +P: Michael Kerrisk +M: mtk.manpages@gmail.com +P: Randy Dunlap +M: rdunlap@xenotime.net +L: linux-doc@vger.kernel.org +S: Maintained DOUBLETALK DRIVER P: James R. Van Zandt @@ -1459,7 +1459,7 @@ S: Maintained DVB SUBSYSTEM AND DRIVERS P: LinuxTV.org Project M: v4l-dvb-maintainer@linuxtv.org -L: linux-dvb@linuxtv.org (subscription required) +L: linux-dvb@linuxtv.org (subscription required) W: http://linuxtv.org/ T: git kernel.org:/pub/scm/linux/kernel/git/mchehab/v4l-dvb.git S: Maintained @@ -2108,7 +2108,7 @@ M: rolandd@cisco.com P: Sean Hefty M: sean.hefty@intel.com P: Hal Rosenstock -M: hal.rosenstock@gmail.com +M: hal.rosenstock@gmail.com L: general@lists.openfabrics.org W: http://www.openib.org/ T: git kernel.org:/pub/scm/linux/kernel/git/roland/infiniband.git @@ -2696,17 +2696,17 @@ S: Maintained MARVELL YUKON / SYSKONNECT DRIVER P: Mirko Lindner -M: mlindner@syskonnect.de +M: mlindner@syskonnect.de P: Ralph Roesler -M: rroesler@syskonnect.de -W: http://www.syskonnect.com -S: Supported +M: rroesler@syskonnect.de +W: http://www.syskonnect.com +S: Supported MAN-PAGES: MANUAL PAGES FOR LINUX -- Sections 2, 3, 4, 5, and 7 P: Michael Kerrisk M: mtk.manpages@gmail.com -W: http://www.kernel.org/doc/man-pages -S: Supported +W: http://www.kernel.org/doc/man-pages +S: Supported MARVELL LIBERTAS WIRELESS DRIVER P: Dan Williams @@ -2867,10 +2867,10 @@ L: linux-kernel@vger.kernel.org S: Maintained MUSB MULTIPOINT HIGH SPEED DUAL-ROLE CONTROLLER -P: Felipe Balbi -M: felipe.balbi@nokia.com -L: linux-usb@vger.kernel.org -S: Maintained +P: Felipe Balbi +M: felipe.balbi@nokia.com +L: linux-usb@vger.kernel.org +S: Maintained MYRICOM MYRI-10G 10GbE DRIVER (MYRI10GE) P: Andrew Gallatin @@ -2882,7 +2882,7 @@ W: http://www.myri.com/scs/download-Myri10GE.html S: Supported NATSEMI ETHERNET DRIVER (DP8381x) -P: Tim Hockin +P: Tim Hockin M: thockin@hockin.org S: Maintained @@ -3101,7 +3101,7 @@ M: laforge@gnumonks.org S: Maintained OMNIVISION OV7670 SENSOR DRIVER -P: Jonathan Corbet +P: Jonathan Corbet M: corbet@lwn.net L: video4linux-list@redhat.com S: Maintained @@ -3211,7 +3211,7 @@ T: git kernel.org:/pub/scm/linux/kernel/git/jbarnes/pci-2.6.git S: Supported PCI HOTPLUG CORE -P: Kristen Carlson Accardi +P: Kristen Carlson Accardi M: kristen.c.accardi@intel.com S: Supported @@ -3650,7 +3650,7 @@ M: jmorris@namei.org P: Eric Paris M: eparis@parisplace.org L: linux-kernel@vger.kernel.org (kernel issues) -L: selinux@tycho.nsa.gov (subscribers-only, general discussion) +L: selinux@tycho.nsa.gov (subscribers-only, general discussion) W: http://www.nsa.gov/selinux S: Supported @@ -3768,10 +3768,10 @@ M: bn@niasdigital.com S: Maintained SOC-CAMERA V4L2 SUBSYSTEM -P: Guennadi Liakhovetski -M: g.liakhovetski@gmx.de -L: video4linux-list@redhat.com -S: Maintained +P: Guennadi Liakhovetski +M: g.liakhovetski@gmx.de +L: video4linux-list@redhat.com +S: Maintained SOFTWARE RAID (Multiple Disks) SUPPORT P: Ingo Molnar @@ -4006,9 +4006,9 @@ T: git repo.or.cz/linux-2.6/linux-acpi-2.6/ibm-acpi-2.6.git S: Maintained TI FLASH MEDIA INTERFACE DRIVER -P: Alex Dubov -M: oakad@yahoo.com -S: Maintained +P: Alex Dubov +M: oakad@yahoo.com +S: Maintained TI OMAP MMC INTERFACE DRIVER P: Carlos Aguiar, Anderson Briglia and Syed Khasim @@ -4154,13 +4154,13 @@ USB BLOCK DRIVER (UB ub) P: Pete Zaitcev M: zaitcev@redhat.com L: linux-kernel@vger.kernel.org -L: linux-usb@vger.kernel.org +L: linux-usb@vger.kernel.org S: Supported USB CDC ETHERNET DRIVER P: Greg Kroah-Hartman M: greg@kroah.com -L: linux-usb@vger.kernel.org +L: linux-usb@vger.kernel.org S: Maintained W: http://www.kroah.com/linux-usb/ @@ -4187,13 +4187,13 @@ S: Maintained USB EHCI DRIVER P: David Brownell M: dbrownell@users.sourceforge.net -L: linux-usb@vger.kernel.org +L: linux-usb@vger.kernel.org S: Odd Fixes USB ET61X[12]51 DRIVER P: Luca Risolia M: luca.risolia@studio.unibo.it -L: linux-usb@vger.kernel.org +L: linux-usb@vger.kernel.org L: video4linux-list@redhat.com W: http://www.linux-projects.org S: Maintained @@ -4201,33 +4201,33 @@ S: Maintained USB GADGET/PERIPHERAL SUBSYSTEM P: David Brownell M: dbrownell@users.sourceforge.net -L: linux-usb@vger.kernel.org +L: linux-usb@vger.kernel.org W: http://www.linux-usb.org/gadget S: Maintained USB HID/HIDBP DRIVERS (USB KEYBOARDS, MICE, REMOTE CONTROLS, ...) P: Jiri Kosina M: jkosina@suse.cz -L: linux-usb@vger.kernel.org +L: linux-usb@vger.kernel.org T: git kernel.org:/pub/scm/linux/kernel/git/jikos/hid.git S: Maintained USB ISP116X DRIVER P: Olav Kongas M: ok@artecdesign.ee -L: linux-usb@vger.kernel.org +L: linux-usb@vger.kernel.org S: Maintained USB KAWASAKI LSI DRIVER P: Oliver Neukum M: oliver@neukum.name -L: linux-usb@vger.kernel.org +L: linux-usb@vger.kernel.org S: Maintained USB MASS STORAGE DRIVER P: Matthew Dharm M: mdharm-usb@one-eyed-alien.net -L: linux-usb@vger.kernel.org +L: linux-usb@vger.kernel.org L: usb-storage@lists.one-eyed-alien.net S: Maintained W: http://www.one-eyed-alien.net/~mdharm/linux-usb/ @@ -4235,26 +4235,26 @@ W: http://www.one-eyed-alien.net/~mdharm/linux-usb/ USB OHCI DRIVER P: David Brownell M: dbrownell@users.sourceforge.net -L: linux-usb@vger.kernel.org +L: linux-usb@vger.kernel.org S: Odd Fixes USB OPTION-CARD DRIVER P: Matthias Urlichs M: smurf@smurf.noris.de -L: linux-usb@vger.kernel.org +L: linux-usb@vger.kernel.org S: Maintained USB OV511 DRIVER P: Mark McClelland M: mmcclell@bigfoot.com -L: linux-usb@vger.kernel.org +L: linux-usb@vger.kernel.org W: http://alpha.dyndns.org/ov511/ S: Maintained USB PEGASUS DRIVER P: Petko Manolov M: petkan@users.sourceforge.net -L: linux-usb@vger.kernel.org +L: linux-usb@vger.kernel.org L: netdev@vger.kernel.org W: http://pegasus2.sourceforge.net/ S: Maintained @@ -4262,13 +4262,13 @@ S: Maintained USB PRINTER DRIVER (usblp) P: Pete Zaitcev M: zaitcev@redhat.com -L: linux-usb@vger.kernel.org +L: linux-usb@vger.kernel.org S: Supported USB RTL8150 DRIVER P: Petko Manolov M: petkan@users.sourceforge.net -L: linux-usb@vger.kernel.org +L: linux-usb@vger.kernel.org L: netdev@vger.kernel.org W: http://pegasus2.sourceforge.net/ S: Maintained @@ -4276,20 +4276,20 @@ S: Maintained USB SE401 DRIVER P: Jeroen Vreeken M: pe1rxq@amsat.org -L: linux-usb@vger.kernel.org +L: linux-usb@vger.kernel.org W: http://www.chello.nl/~j.vreeken/se401/ S: Maintained USB SERIAL BELKIN F5U103 DRIVER P: William Greathouse M: wgreathouse@smva.com -L: linux-usb@vger.kernel.org +L: linux-usb@vger.kernel.org S: Maintained USB SERIAL CYPRESS M8 DRIVER P: Lonnie Mendez M: dignome@gmail.com -L: linux-usb@vger.kernel.org +L: linux-usb@vger.kernel.org S: Maintained W: http://geocities.com/i0xox0i W: http://firstlight.net/cvs @@ -4304,39 +4304,39 @@ USB SERIAL DIGI ACCELEPORT DRIVER P: Peter Berger and Al Borchers M: pberger@brimson.com M: alborchers@steinerpoint.com -L: linux-usb@vger.kernel.org +L: linux-usb@vger.kernel.org S: Maintained USB SERIAL DRIVER P: Greg Kroah-Hartman M: gregkh@suse.de -L: linux-usb@vger.kernel.org +L: linux-usb@vger.kernel.org S: Supported USB SERIAL EMPEG EMPEG-CAR MARK I/II DRIVER P: Gary Brubaker M: xavyer@ix.netcom.com -L: linux-usb@vger.kernel.org +L: linux-usb@vger.kernel.org S: Maintained USB SERIAL KEYSPAN DRIVER P: Greg Kroah-Hartman M: greg@kroah.com -L: linux-usb@vger.kernel.org +L: linux-usb@vger.kernel.org W: http://www.kroah.com/linux/ S: Maintained USB SERIAL WHITEHEAT DRIVER P: Support Department M: support@connecttech.com -L: linux-usb@vger.kernel.org +L: linux-usb@vger.kernel.org W: http://www.connecttech.com S: Supported USB SN9C1xx DRIVER P: Luca Risolia M: luca.risolia@studio.unibo.it -L: linux-usb@vger.kernel.org +L: linux-usb@vger.kernel.org L: video4linux-list@redhat.com W: http://www.linux-projects.org S: Maintained @@ -4344,7 +4344,7 @@ S: Maintained USB SUBSYSTEM P: Greg Kroah-Hartman M: gregkh@suse.de -L: linux-usb@vger.kernel.org +L: linux-usb@vger.kernel.org W: http://www.linux-usb.org T: quilt kernel.org/pub/linux/kernel/people/gregkh/gregkh-2.6/ S: Supported @@ -4352,7 +4352,7 @@ S: Supported USB UHCI DRIVER P: Alan Stern M: stern@rowland.harvard.edu -L: linux-usb@vger.kernel.org +L: linux-usb@vger.kernel.org S: Maintained USB "USBNET" DRIVER FRAMEWORK @@ -4373,7 +4373,7 @@ S: Maintained USB W996[87]CF DRIVER P: Luca Risolia M: luca.risolia@studio.unibo.it -L: linux-usb@vger.kernel.org +L: linux-usb@vger.kernel.org L: video4linux-list@redhat.com W: http://www.linux-projects.org S: Maintained @@ -4387,7 +4387,7 @@ S: Maintained USB ZC0301 DRIVER P: Luca Risolia M: luca.risolia@studio.unibo.it -L: linux-usb@vger.kernel.org +L: linux-usb@vger.kernel.org L: video4linux-list@redhat.com W: http://www.linux-projects.org S: Maintained @@ -4395,14 +4395,14 @@ S: Maintained USB ZD1201 DRIVER P: Jeroen Vreeken M: pe1rxq@amsat.org -L: linux-usb@vger.kernel.org +L: linux-usb@vger.kernel.org W: http://linux-lc100020.sourceforge.net S: Maintained USB ZR364XX DRIVER P: Antoine Jacquet M: royale@zerezo.com -L: linux-usb@vger.kernel.org +L: linux-usb@vger.kernel.org L: video4linux-list@redhat.com W: http://royale.zerezo.com/zr364xx/ S: Maintained -- cgit v1.2.3 From baaea1dc0befb7b64e6dbf2d1469d0a296a79e54 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Sat, 20 Sep 2008 12:34:33 +0200 Subject: MAINTAINERS: Various fixes * Normalize some S: entries to match the enumeration at the beginning of the file. * Change one mailing list entry from S: to L:. Signed-off-by: Jean Delvare Signed-off-by: Linus Torvalds --- MAINTAINERS | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index 85cfd4d2ff49..cad81a24e832 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1359,7 +1359,7 @@ P: Digi International, Inc M: Eng.Linux@digi.com L: Eng.Linux@digi.com W: http://www.digi.com -S: Orphaned +S: Orphan DIRECTORY NOTIFICATION P: Stephen Rothwell @@ -1797,7 +1797,7 @@ FUTURE DOMAIN TMC-16x0 SCSI DRIVER (16-bit) P: Rik Faith M: faith@cs.unc.edu L: linux-scsi@vger.kernel.org -S: Odd fixes (e.g., new signatures) +S: Odd Fixes (e.g., new signatures) GDT SCSI DISK ARRAY CONTROLLER DRIVER P: Achim Leubner @@ -1838,10 +1838,10 @@ S: Maintained HARDWARE MONITORING L: lm-sensors@lm-sensors.org W: http://www.lm-sensors.org/ -S: Orphaned +S: Orphan HARDWARE RANDOM NUMBER GENERATOR CORE -S: Orphaned +S: Orphan HARD DRIVE ACTIVE PROTECTION SYSTEM (HDAPS) DRIVER P: Robert Love @@ -2735,7 +2735,7 @@ S: Maintained MEGARAID SCSI DRIVERS P: Neela Syam Kolli M: megaraidlinux@lsi.com -S: linux-scsi@vger.kernel.org +L: linux-scsi@vger.kernel.org W: http://megaraid.lsilogic.com S: Maintained @@ -2853,7 +2853,7 @@ MULTIMEDIA CARD (MMC) ETC. OVER SPI P: David Brownell M: dbrownell@users.sourceforge.net L: linux-kernel@vger.kernel.org -S: Odd fixes +S: Odd Fixes MULTISOUND SOUND DRIVER P: Andrew Veliath @@ -3925,7 +3925,7 @@ S: Maintained STARMODE RADIO IP (STRIP) PROTOCOL DRIVER W: http://mosquitonet.Stanford.EDU/strip.html -S: Unsupported ? +S: Orphan STRADIS MPEG-2 DECODER DRIVER P: Nathan Laredo -- cgit v1.2.3 From 72d31053f62c4bc464c2783974926969614a8649 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sun, 21 Sep 2008 15:29:55 -0700 Subject: Linux 2.6.27-rc7 --- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Makefile b/Makefile index 4ff83ea36c19..cab896a97296 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ VERSION = 2 PATCHLEVEL = 6 SUBLEVEL = 27 -EXTRAVERSION = -rc6 +EXTRAVERSION = -rc7 NAME = Rotary Wombat # *DOCUMENTATION* -- cgit v1.2.3 From b61e06f258e50b25c38a73bea782bdb6876f0f70 Mon Sep 17 00:00:00 2001 From: Andrea Righi Date: Sat, 20 Sep 2008 18:02:27 +0200 Subject: x86, oprofile: BUG scheduling while atomic nmi_shutdown() calls unregister_die_notifier() from an atomic context after setting preempt_disable() via get_cpu_var(): [ 1049.404154] BUG: scheduling while atomic: oprofiled/7796/0x00000002 [ 1049.404171] INFO: lockdep is turned off. [ 1049.404176] Modules linked in: oprofile af_packet rfcomm l2cap kvm_intel kvm i915 drm acpi_cpufreq cpufreq_userspace cpufreq_conservative cpufreq_ondemand cpufreq_powersave freq_table container sbs sbshc dm_mod arc4 ecb cryptomgr aead snd_hda_intel crypto_blkcipher snd_pcm_oss crypto_algapi snd_pcm iwlagn iwlcore snd_timer iTCO_wdt led_class btusb iTCO_vendor_support snd psmouse bluetooth mac80211 soundcore cfg80211 snd_page_alloc intel_agp video output button battery ac dcdbas evdev ext3 jbd mbcache sg sd_mod piix ata_piix libata scsi_mod dock tg3 libphy ehci_hcd uhci_hcd usbcore thermal processor fan fuse [ 1049.404362] Pid: 7796, comm: oprofiled Not tainted 2.6.27-rc5-mm1 #30 [ 1049.404368] Call Trace: [ 1049.404384] [] thread_return+0x4a0/0x7d3 [ 1049.404396] [] generic_exec_single+0x52/0xe0 [ 1049.404405] [] generic_exec_single+0xda/0xe0 [ 1049.404414] [] smp_call_function_single+0x73/0x150 [ 1049.404423] [] schedule_timeout+0x95/0xd0 [ 1049.404430] [] wait_for_common+0x43/0x180 [ 1049.404438] [] wait_for_common+0x114/0x180 [ 1049.404448] [] default_wake_function+0x0/0x10 [ 1049.404457] [] synchronize_rcu+0x30/0x40 [ 1049.404463] [] wakeme_after_rcu+0x0/0x10 [ 1049.404472] [] _spin_unlock_irqrestore+0x40/0x80 [ 1049.404482] [] atomic_notifier_chain_unregister+0x3f/0x60 [ 1049.404501] [] nmi_shutdown+0x51/0x90 [oprofile] [ 1049.404517] [] oprofile_shutdown+0x34/0x70 [oprofile] [ 1049.404532] [] event_buffer_release+0xe/0x40 [oprofile] [ 1049.404543] [] __fput+0xcd/0x240 [ 1049.404551] [] filp_close+0x54/0x90 [ 1049.404560] [] put_files_struct+0xb1/0xd0 [ 1049.404568] [] do_exit+0x18f/0x930 [ 1049.404576] [] restore_args+0x0/0x30 [ 1049.404584] [] do_group_exit+0x36/0xa0 [ 1049.404592] [] system_call_fastpath+0x16/0x1b This can be easily triggered with 'opcontrol --shutdown'. Simply move get_cpu_var() above unregister_die_notifier(). Signed-off-by: Andrea Righi Acked-by: Robert Richter Signed-off-by: Ingo Molnar --- arch/x86/oprofile/nmi_int.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/arch/x86/oprofile/nmi_int.c b/arch/x86/oprofile/nmi_int.c index 0227694f7dab..8a5f1614a3d5 100644 --- a/arch/x86/oprofile/nmi_int.c +++ b/arch/x86/oprofile/nmi_int.c @@ -295,10 +295,12 @@ static void nmi_cpu_shutdown(void *dummy) static void nmi_shutdown(void) { - struct op_msrs *msrs = &get_cpu_var(cpu_msrs); + struct op_msrs *msrs; + nmi_enabled = 0; on_each_cpu(nmi_cpu_shutdown, NULL, 1); unregister_die_notifier(&profile_exceptions_nb); + msrs = &get_cpu_var(cpu_msrs); model->shutdown(msrs); free_msrs(); put_cpu_var(cpu_msrs); -- cgit v1.2.3 From b1132b3d874dcef296a63b46680a41b02de66bb4 Mon Sep 17 00:00:00 2001 From: Haavard Skinnemoen Date: Fri, 19 Sep 2008 18:50:45 +0200 Subject: ALSA: ASoC: Fix at32-pcm build breakage with PM enabled s/PDC_PTCR/ATMEL_PDC_PTCR/ Signed-off-by: Haavard Skinnemoen Acked-by: Mark Brown Signed-off-by: Takashi Iwai --- sound/soc/at32/at32-pcm.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/sound/soc/at32/at32-pcm.c b/sound/soc/at32/at32-pcm.c index 435f1daf177c..c83584f989a9 100644 --- a/sound/soc/at32/at32-pcm.c +++ b/sound/soc/at32/at32-pcm.c @@ -434,7 +434,8 @@ static int at32_pcm_suspend(struct platform_device *pdev, params = prtd->params; /* Disable the PDC and save the PDC registers */ - ssc_writex(params->ssc->regs, PDC_PTCR, params->mask->pdc_disable); + ssc_writex(params->ssc->regs, ATMEL_PDC_PTCR, + params->mask->pdc_disable); prtd->pdc_xpr_save = ssc_readx(params->ssc->regs, params->pdc->xpr); prtd->pdc_xcr_save = ssc_readx(params->ssc->regs, params->pdc->xcr); @@ -464,7 +465,7 @@ static int at32_pcm_resume(struct platform_device *pdev, ssc_writex(params->ssc->regs, params->pdc->xnpr, prtd->pdc_xnpr_save); ssc_writex(params->ssc->regs, params->pdc->xncr, prtd->pdc_xncr_save); - ssc_writex(params->ssc->regs, PDC_PTCR, params->mask->pdc_enable); + ssc_writex(params->ssc->regs, ATMEL_PDC_PTCR, params->mask->pdc_enable); return 0; } #else /* CONFIG_PM */ -- cgit v1.2.3 From cec5eb7be3a104fffd27ca967ee8e15a123050e2 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Mon, 22 Sep 2008 15:58:14 +0100 Subject: pcmcia: Fix broken abuse of dev->driver_data PCMCIA abuses dev->private_data in the probe methods. Unfortunately it continues to abuse it after calling drv->probe() which leads to crashes and other nasties (such as bogus probes of multifunction devices) giving errors like pcmcia: registering new device pcmcia0.1 kernel: 0.1: GetNextTuple: No more items Extract the passed data before calling the driver probe function that way we don't blow up when the driver reuses dev->private_data as its right. As its close to the final release just move the hack so it works out, hopefully someone will be sufficiently embarrassed to produce a nice rework for 2.6.28. Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/pcmcia/ds.c | 23 ++++++++++++++--------- 1 file changed, 14 insertions(+), 9 deletions(-) diff --git a/drivers/pcmcia/ds.c b/drivers/pcmcia/ds.c index 4174d9656e35..34c83d3ca0fa 100644 --- a/drivers/pcmcia/ds.c +++ b/drivers/pcmcia/ds.c @@ -427,6 +427,18 @@ static int pcmcia_device_probe(struct device * dev) p_drv = to_pcmcia_drv(dev->driver); s = p_dev->socket; + /* The PCMCIA code passes the match data in via dev->driver_data + * which is an ugly hack. Once the driver probe is called it may + * and often will overwrite the match data so we must save it first + * + * handle pseudo multifunction devices: + * there are at most two pseudo multifunction devices. + * if we're matching against the first, schedule a + * call which will then check whether there are two + * pseudo devices, and if not, add the second one. + */ + did = p_dev->dev.driver_data; + ds_dbg(1, "trying to bind %s to %s\n", p_dev->dev.bus_id, p_drv->drv.name); @@ -455,21 +467,14 @@ static int pcmcia_device_probe(struct device * dev) goto put_module; } - /* handle pseudo multifunction devices: - * there are at most two pseudo multifunction devices. - * if we're matching against the first, schedule a - * call which will then check whether there are two - * pseudo devices, and if not, add the second one. - */ - did = p_dev->dev.driver_data; if (did && (did->match_flags & PCMCIA_DEV_ID_MATCH_DEVICE_NO) && (p_dev->socket->device_count == 1) && (p_dev->device_no == 0)) pcmcia_add_device_later(p_dev->socket, 0); - put_module: +put_module: if (ret) module_put(p_drv->owner); - put_dev: +put_dev: if (ret) put_device(dev); return (ret); -- cgit v1.2.3 From d0be7cc7688d0cc2e4daf952c43b5ce86e5c8a1d Mon Sep 17 00:00:00 2001 From: Senthil Balasubramanian Date: Wed, 17 Sep 2008 12:39:49 +0530 Subject: ath9k: connectivity is lost after Group rekeying is done Connectivtiy is lost after Group rekeying is done. The keytype maintained by ath9k is reset when group key is updated. Though sc_keytype can be reset only for broadcast key the proper fix would be to use mac80211 provided key type from txinfo during xmit and get rid of sc_keytype from ath9k ath_softc. Signed-off-by: Vasanthakumar Thiagarajan Signed-off-by: Senthil Balasubramanian Tested-by: Steven Noonan Signed-off-by: John W. Linville --- drivers/net/wireless/ath9k/core.h | 1 - drivers/net/wireless/ath9k/main.c | 3 --- drivers/net/wireless/ath9k/xmit.c | 6 +++--- 3 files changed, 3 insertions(+), 7 deletions(-) diff --git a/drivers/net/wireless/ath9k/core.h b/drivers/net/wireless/ath9k/core.h index 4ee695b76b88..2f84093331ee 100644 --- a/drivers/net/wireless/ath9k/core.h +++ b/drivers/net/wireless/ath9k/core.h @@ -974,7 +974,6 @@ struct ath_softc { u32 sc_keymax; /* size of key cache */ DECLARE_BITMAP(sc_keymap, ATH_KEYMAX); /* key use bit map */ u8 sc_splitmic; /* split TKIP MIC keys */ - int sc_keytype; /* RX */ struct list_head sc_rxbuf; diff --git a/drivers/net/wireless/ath9k/main.c b/drivers/net/wireless/ath9k/main.c index 99badf1404c3..099719649c98 100644 --- a/drivers/net/wireless/ath9k/main.c +++ b/drivers/net/wireless/ath9k/main.c @@ -206,8 +206,6 @@ static int ath_key_config(struct ath_softc *sc, if (!ret) return -EIO; - if (mac) - sc->sc_keytype = hk.kv_type; return 0; } @@ -778,7 +776,6 @@ static int ath9k_set_key(struct ieee80211_hw *hw, case DISABLE_KEY: ath_key_delete(sc, key); clear_bit(key->keyidx, sc->sc_keymap); - sc->sc_keytype = ATH9K_CIPHER_CLR; break; default: ret = -EINVAL; diff --git a/drivers/net/wireless/ath9k/xmit.c b/drivers/net/wireless/ath9k/xmit.c index 550129f717e2..8b332e11a656 100644 --- a/drivers/net/wireless/ath9k/xmit.c +++ b/drivers/net/wireless/ath9k/xmit.c @@ -315,11 +315,11 @@ static int ath_tx_prepare(struct ath_softc *sc, txctl->keyix = tx_info->control.hw_key->hw_key_idx; txctl->frmlen += tx_info->control.icv_len; - if (sc->sc_keytype == ATH9K_CIPHER_WEP) + if (tx_info->control.hw_key->alg == ALG_WEP) txctl->keytype = ATH9K_KEY_TYPE_WEP; - else if (sc->sc_keytype == ATH9K_CIPHER_TKIP) + else if (tx_info->control.hw_key->alg == ALG_TKIP) txctl->keytype = ATH9K_KEY_TYPE_TKIP; - else if (sc->sc_keytype == ATH9K_CIPHER_AES_CCM) + else if (tx_info->control.hw_key->alg == ALG_CCMP) txctl->keytype = ATH9K_KEY_TYPE_AES; } -- cgit v1.2.3 From 5d89945e6ec44494285cb8de85d4f43d4647b740 Mon Sep 17 00:00:00 2001 From: "born.into.silence@gmail.com" Date: Fri, 19 Sep 2008 16:47:06 -0700 Subject: wireless: zd1211rw: add device ID fix wifi dongle "trust nw-3100" akpm: taken from http://bugzilla.kernel.org/show_bug.cgi?id=11587 I bought the wifi dongle trust nw-3100 wich is in fact a zd1211rw. Its hardware id was missing in the sources, adding it made it work flawlessly. Cc: Daniel Drake Cc: Ulrich Kunitz Cc: Johannes Berg Signed-off-by: Andrew Morton Signed-off-by: John W. Linville --- drivers/net/wireless/zd1211rw/zd_usb.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/wireless/zd1211rw/zd_usb.c b/drivers/net/wireless/zd1211rw/zd_usb.c index da8b7433e3a6..a60ae86bd5c9 100644 --- a/drivers/net/wireless/zd1211rw/zd_usb.c +++ b/drivers/net/wireless/zd1211rw/zd_usb.c @@ -58,6 +58,7 @@ static struct usb_device_id usb_ids[] = { { USB_DEVICE(0x0586, 0x3407), .driver_info = DEVICE_ZD1211 }, { USB_DEVICE(0x129b, 0x1666), .driver_info = DEVICE_ZD1211 }, { USB_DEVICE(0x157e, 0x300a), .driver_info = DEVICE_ZD1211 }, + { USB_DEVICE(0x0105, 0x145f), .driver_info = DEVICE_ZD1211 }, /* ZD1211B */ { USB_DEVICE(0x0ace, 0x1215), .driver_info = DEVICE_ZD1211B }, { USB_DEVICE(0x157e, 0x300d), .driver_info = DEVICE_ZD1211B }, -- cgit v1.2.3 From 06f95ea8988513b172080c419e4be8826c55a318 Mon Sep 17 00:00:00 2001 From: Alex Chiang Date: Tue, 16 Sep 2008 18:25:33 -0600 Subject: [IA64] Ski simulator doesn't need check_sal_cache_flush Peter Chubb reported that commit 3463a93def55c309f3c0d0a8aaf216be3be42d64 (Update check_sal_cache_flush to use platform_send_ipi()) broke Ski because it does not implement IPIs. Tony Luck suggested we just #ifndef out the call (since the simulator does not have the SAL bug that this code is attempting to detect and workaround) Signed-off-by: Alex Chiang Signed-off-by: Tony Luck --- arch/ia64/kernel/setup.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/ia64/kernel/setup.c b/arch/ia64/kernel/setup.c index c27d5b2c182b..de636b215677 100644 --- a/arch/ia64/kernel/setup.c +++ b/arch/ia64/kernel/setup.c @@ -616,7 +616,9 @@ setup_arch (char **cmdline_p) ia64_mca_init(); platform_setup(cmdline_p); +#ifndef CONFIG_IA64_HP_SIM check_sal_cache_flush(); +#endif paging_init(); } -- cgit v1.2.3 From d3758f87f39c5b072dde74c55bfb988262a3a45c Mon Sep 17 00:00:00 2001 From: Jay Lan Date: Mon, 22 Sep 2008 14:21:19 -0700 Subject: [IA64] kexec fails on systems with blocks of uncached memory Currently a memory segment in memory map with attribute of EFI_MEMORY_UC is denoted as "System RAM" in /proc/iomem, while memory of attribute (EFI_MEMORY_WB|EFI_MEMORY_UC) is also labeled the same. The kexec utility then includes uncached memory as part of vmcore. The kdump kernel MCA'ed when it tries to save the vmcore to a disk. A normal "cached" access may cause MCAs. This patch would label memory with attribute of EFI_MEMORY_UC only as "Uncached RAM" so that kexec would know not to include it in the vmcore. I will submit a separate kexec-tools patch to the kexec list. Signed-off-by: Jay Lan Acked-by: Simon Horman Signed-off-by: Tony Luck --- arch/ia64/kernel/efi.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/arch/ia64/kernel/efi.c b/arch/ia64/kernel/efi.c index d45f215bc8fc..51b75cea7018 100644 --- a/arch/ia64/kernel/efi.c +++ b/arch/ia64/kernel/efi.c @@ -1232,9 +1232,10 @@ efi_initialize_iomem_resources(struct resource *code_resource, if (md->attribute & EFI_MEMORY_WP) { name = "System ROM"; flags |= IORESOURCE_READONLY; - } else { + } else if (md->attribute == EFI_MEMORY_UC) + name = "Uncached RAM"; + else name = "System RAM"; - } break; case EFI_ACPI_MEMORY_NVS: -- cgit v1.2.3 From 6115e8557a75b5f24b56ed46c60dffef7e7fa992 Mon Sep 17 00:00:00 2001 From: Senthil Balasubramanian Date: Mon, 22 Sep 2008 14:22:39 +0530 Subject: ath9k: Fix IRQ nobody cared issue with ath9k IRQs should be disabled before calling free_irq. Also flush pending IRQs. Pasted the kernel log message for reference. kernel: irq 17: nobody cared (try booting with the "irqpoll" option) kernel: [] __report_bad_irq+0x2e/0x6f kernel: [] note_interrupt+0x1b5/0x207 kernel: [] ? handle_IRQ_event+0x21/0x48 kernel: [] handle_fasteoi_irq+0x8e/0xad kernel: [] do_IRQ+0x6c/0x84 kernel: [] common_interrupt+0x23/0x28 kernel: [] ? acpi_idle_enter_simple+0x198/0x205 kernel: [] ? menu_select+0x5c/0x78 kernel: [] cpuidle_idle_call+0x59/0x89 kernel: [] cpu_idle+0xae/0xcf kernel: [] rest_init+0x4e/0x50 kernel: ======================= kernel: handlers: kernel: [] (ath_isr+0x0/0x13a [ath9k]) kernel: Disabling IRQ #17 Signed-off-by: Senthil Balasubramanian Tested-by: Steven Noonan Signed-off-by: John W. Linville --- drivers/net/wireless/ath9k/core.c | 4 ++-- drivers/net/wireless/ath9k/main.c | 9 ++++++++- 2 files changed, 10 insertions(+), 3 deletions(-) diff --git a/drivers/net/wireless/ath9k/core.c b/drivers/net/wireless/ath9k/core.c index f6c45288d0e7..c04959357bda 100644 --- a/drivers/net/wireless/ath9k/core.c +++ b/drivers/net/wireless/ath9k/core.c @@ -294,8 +294,6 @@ static int ath_stop(struct ath_softc *sc) * hardware is gone (invalid). */ - if (!sc->sc_invalid) - ath9k_hw_set_interrupts(ah, 0); ath_draintxq(sc, false); if (!sc->sc_invalid) { ath_stoprecv(sc); @@ -1336,6 +1334,8 @@ void ath_deinit(struct ath_softc *sc) DPRINTF(sc, ATH_DBG_CONFIG, "%s\n", __func__); + tasklet_kill(&sc->intr_tq); + tasklet_kill(&sc->bcon_tasklet); ath_stop(sc); if (!sc->sc_invalid) ath9k_hw_setpower(sc->sc_ah, ATH9K_PM_AWAKE); diff --git a/drivers/net/wireless/ath9k/main.c b/drivers/net/wireless/ath9k/main.c index 099719649c98..acebdf1d20a8 100644 --- a/drivers/net/wireless/ath9k/main.c +++ b/drivers/net/wireless/ath9k/main.c @@ -1411,10 +1411,17 @@ static void ath_pci_remove(struct pci_dev *pdev) { struct ieee80211_hw *hw = pci_get_drvdata(pdev); struct ath_softc *sc = hw->priv; + enum ath9k_int status; - if (pdev->irq) + if (pdev->irq) { + ath9k_hw_set_interrupts(sc->sc_ah, 0); + /* clear the ISR */ + ath9k_hw_getisr(sc->sc_ah, &status); + sc->sc_invalid = 1; free_irq(pdev->irq, sc); + } ath_detach(sc); + pci_iounmap(pdev, sc->mem); pci_release_region(pdev, 0); pci_disable_device(pdev); -- cgit v1.2.3 From bdbef3d696ca83489eb653459b5a7a62ecf5596a Mon Sep 17 00:00:00 2001 From: Marcel Holtmann Date: Tue, 23 Sep 2008 00:16:35 +0200 Subject: [Bluetooth] Fix I/O errors on MacBooks with Broadcom chips The newer MacBooks contain a Broadcom based Bluetooth chip and to make this work properly, HCI_Reset must be send first. If HCI_Reset is not used then a lot of I/O errors show up and its triggers packets from non-existent ACL links. Signed-off-by: Marcel Holtmann --- drivers/bluetooth/btusb.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c index 6a010681ecf3..7665347238c7 100644 --- a/drivers/bluetooth/btusb.c +++ b/drivers/bluetooth/btusb.c @@ -104,6 +104,9 @@ static struct usb_device_id blacklist_table[] = { /* Broadcom BCM2046 */ { USB_DEVICE(0x0a5c, 0x2151), .driver_info = BTUSB_RESET }, + /* Apple MacBook Pro with Broadcom chip */ + { USB_DEVICE(0x05ac, 0x820f), .driver_info = BTUSB_RESET }, + /* IBM/Lenovo ThinkPad with Broadcom chip */ { USB_DEVICE(0x0a5c, 0x201e), .driver_info = BTUSB_RESET | BTUSB_WRONG_SCO_MTU }, { USB_DEVICE(0x0a5c, 0x2110), .driver_info = BTUSB_RESET | BTUSB_WRONG_SCO_MTU }, -- cgit v1.2.3 From e8c3c3d22b340a406a9aab1b7a9f436636c3de9d Mon Sep 17 00:00:00 2001 From: Marcel Holtmann Date: Tue, 23 Sep 2008 00:16:36 +0200 Subject: [Bluetooth] Fix wrong URB handling of btusb driver The btusb driver contains two typos that result in some buggy behavior, but the impact is not immediately visible. During initialization the submitting of interrupt URBs might fail and then make sure to remove the correct flag and not one of the hci_dev flags. When closing down the interface make sure to kill the anchor for the ISOC URBs and not kill the interrupt URBs twice. Also cancel any scheduled work when closing down the interface. Signed-off-by: Marcel Holtmann --- drivers/bluetooth/btusb.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c index 7665347238c7..b4756a6a3a68 100644 --- a/drivers/bluetooth/btusb.c +++ b/drivers/bluetooth/btusb.c @@ -519,7 +519,7 @@ static int btusb_open(struct hci_dev *hdev) err = btusb_submit_intr_urb(hdev); if (err < 0) { - clear_bit(BTUSB_INTR_RUNNING, &hdev->flags); + clear_bit(BTUSB_INTR_RUNNING, &data->flags); clear_bit(HCI_RUNNING, &hdev->flags); } @@ -535,8 +535,10 @@ static int btusb_close(struct hci_dev *hdev) if (!test_and_clear_bit(HCI_RUNNING, &hdev->flags)) return 0; + cancel_work_sync(&data->work); + clear_bit(BTUSB_ISOC_RUNNING, &data->flags); - usb_kill_anchored_urbs(&data->intr_anchor); + usb_kill_anchored_urbs(&data->isoc_anchor); clear_bit(BTUSB_BULK_RUNNING, &data->flags); usb_kill_anchored_urbs(&data->bulk_anchor); -- cgit v1.2.3 From 5fbcd260c2c52f78cd699f65e9c7af2e60b5380c Mon Sep 17 00:00:00 2001 From: Marcel Holtmann Date: Tue, 23 Sep 2008 00:16:36 +0200 Subject: [Bluetooth] Fix USB disconnect handling of btusb driver The USB transport specification for Bluetooth splits the ACL and SCO handling into two separate interfaces. In Linux it possible to probe and disconnect these interfaces independently. So make sure that both interfaces are tightly bound together. This fixes the suspend regression that some people have expierenced. Signed-off-by: Oliver Neukum Signed-off-by: Marcel Holtmann --- drivers/bluetooth/btusb.c | 19 +++++++++++++++---- 1 file changed, 15 insertions(+), 4 deletions(-) diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c index b4756a6a3a68..29ae99817c60 100644 --- a/drivers/bluetooth/btusb.c +++ b/drivers/bluetooth/btusb.c @@ -172,6 +172,7 @@ static struct usb_device_id blacklist_table[] = { struct btusb_data { struct hci_dev *hdev; struct usb_device *udev; + struct usb_interface *intf; struct usb_interface *isoc; spinlock_t lock; @@ -826,6 +827,7 @@ static int btusb_probe(struct usb_interface *intf, } data->udev = interface_to_usbdev(intf); + data->intf = intf; spin_lock_init(&data->lock); @@ -894,7 +896,7 @@ static int btusb_probe(struct usb_interface *intf, if (data->isoc) { err = usb_driver_claim_interface(&btusb_driver, - data->isoc, NULL); + data->isoc, data); if (err < 0) { hci_free_dev(hdev); kfree(data); @@ -926,13 +928,22 @@ static void btusb_disconnect(struct usb_interface *intf) hdev = data->hdev; - if (data->isoc) - usb_driver_release_interface(&btusb_driver, data->isoc); + __hci_dev_hold(hdev); - usb_set_intfdata(intf, NULL); + usb_set_intfdata(data->intf, NULL); + + if (data->isoc) + usb_set_intfdata(data->isoc, NULL); hci_unregister_dev(hdev); + if (intf == data->isoc) + usb_driver_release_interface(&btusb_driver, data->intf); + else if (data->isoc) + usb_driver_release_interface(&btusb_driver, data->isoc); + + __hci_dev_put(hdev); + hci_free_dev(hdev); } -- cgit v1.2.3 From 44b50e5a1af13c605d6c3b17a60e42eb0ee48d5f Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Mon, 22 Sep 2008 15:42:24 -0700 Subject: sparc64: Fix missing devices due to PCI bridge test in of_create_pci_dev(). Just like in the arch/sparc64/kernel/of_device.c code fix commit 071d7f4c3b411beae08d27656e958070c43b78b4 ("sparc64: Fix SMP bootup with CONFIG_STACK_DEBUG or ftrace.") we have to check the OF device node name for "pci" instead of relying upon the 'device_type' property being there on all PCI bridges. Tested by Meelis Roos, and confirmed to make the PCI QFE devices reappear on the E3500 system. Signed-off-by: David S. Miller --- arch/sparc64/kernel/pci.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/sparc64/kernel/pci.c b/arch/sparc64/kernel/pci.c index 55096195458f..80dad76f8b81 100644 --- a/arch/sparc64/kernel/pci.c +++ b/arch/sparc64/kernel/pci.c @@ -425,7 +425,7 @@ struct pci_dev *of_create_pci_dev(struct pci_pbm_info *pbm, dev->current_state = 4; /* unknown power state */ dev->error_state = pci_channel_io_normal; - if (!strcmp(type, "pci") || !strcmp(type, "pciex")) { + if (!strcmp(node->name, "pci")) { /* a PCI-PCI bridge */ dev->hdr_type = PCI_HEADER_TYPE_BRIDGE; dev->rom_base_reg = PCI_ROM_ADDRESS1; -- cgit v1.2.3 From 7f605ac00416d763c2d9681e378a75e7adbb06e8 Mon Sep 17 00:00:00 2001 From: Akinobu Mita Date: Sat, 13 Sep 2008 18:47:19 +0900 Subject: [WATCHDOG] ibmasr: remove unnecessary spin_unlock() __asr_toggle() is always called with asr_lock held. But there is unnecessary spin_unlock() call in __asr_toggle(). Signed-off-by: Akinobu Mita Signed-off-by: Wim Van Sebroeck Acked-by: Andrey Panin Signed-off-by: Andrew Morton --- drivers/watchdog/ibmasr.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/watchdog/ibmasr.c b/drivers/watchdog/ibmasr.c index b82405cfb4cd..89fcefcc8510 100644 --- a/drivers/watchdog/ibmasr.c +++ b/drivers/watchdog/ibmasr.c @@ -85,7 +85,6 @@ static void __asr_toggle(void) outb(reg & ~asr_toggle_mask, asr_write_addr); reg = inb(asr_read_addr); - spin_unlock(&asr_lock); } static void asr_toggle(void) -- cgit v1.2.3 From edf86c9b98b5162bed64a70f9424bd2dd58a717e Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Tue, 16 Sep 2008 11:31:01 +0100 Subject: [WATCHDOG] wdt285: fix sparse warnings The wdt285.c watchdog driver is producing a number of sparse errors due to missing __user attributes to calls to put_user and copy_to_user, as well as in the prototype of watchdog_write. wdt285.c:144:21: warning: incorrect type in argument 1 (different address spaces) wdt285.c:144:21: expected void [noderef] *to wdt285.c:144:21: got void * wdt285.c:150:9: warning: incorrect type in initializer (different address spaces) wdt285.c:150:9: expected int const [noderef] *register __p wdt285.c:150:9: got int * wdt285.c:159:9: warning: incorrect type in initializer (different address spaces) wdt285.c:159:9: expected int const [noderef] *register __p wdt285.c:159:9: got int * wdt285.c:174:9: warning: incorrect type in initializer (different address spaces) wdt285.c:174:9: expected int const [noderef] *register __p wdt285.c:174:9: got int * wdt285.c:183:12: warning: incorrect type in initializer (incompatible argument 2 (different address spaces)) wdt285.c:183:12: expected int ( *write )( ... ) wdt285.c:183:12: got int ( static [toplevel] * )( ... ) Signed-off-by: Ben Dooks Signed-off-by: Wim Van Sebroeck Signed-off-by: Andrew Morton --- drivers/watchdog/wdt285.c | 15 ++++++++------- 1 file changed, 8 insertions(+), 7 deletions(-) diff --git a/drivers/watchdog/wdt285.c b/drivers/watchdog/wdt285.c index db362c34958b..191ea6302107 100644 --- a/drivers/watchdog/wdt285.c +++ b/drivers/watchdog/wdt285.c @@ -115,8 +115,8 @@ static int watchdog_release(struct inode *inode, struct file *file) return 0; } -static ssize_t watchdog_write(struct file *file, const char *data, - size_t len, loff_t *ppos) +static ssize_t watchdog_write(struct file *file, const char __user *data, + size_t len, loff_t *ppos) { /* * Refresh the timer. @@ -133,21 +133,22 @@ static const struct watchdog_info ident = { }; static long watchdog_ioctl(struct file *file, unsigned int cmd, - unsigned long arg) + unsigned long arg) { unsigned int new_margin; + int __user *int_arg = (int __user *)arg; int ret = -ENOTTY; switch (cmd) { case WDIOC_GETSUPPORT: ret = 0; - if (copy_to_user((void *)arg, &ident, sizeof(ident))) + if (copy_to_user((void __user *)arg, &ident, sizeof(ident))) ret = -EFAULT; break; case WDIOC_GETSTATUS: case WDIOC_GETBOOTSTATUS: - ret = put_user(0, (int *)arg); + ret = put_user(0, int_arg); break; case WDIOC_KEEPALIVE: @@ -156,7 +157,7 @@ static long watchdog_ioctl(struct file *file, unsigned int cmd, break; case WDIOC_SETTIMEOUT: - ret = get_user(new_margin, (int *)arg); + ret = get_user(new_margin, int_arg); if (ret) break; @@ -171,7 +172,7 @@ static long watchdog_ioctl(struct file *file, unsigned int cmd, watchdog_ping(); /* Fall */ case WDIOC_GETTIMEOUT: - ret = put_user(soft_margin, (int *)arg); + ret = put_user(soft_margin, int_arg); break; } return ret; -- cgit v1.2.3 From 7275fc8c36dbad3a871f82b1f9f1f524688176ea Mon Sep 17 00:00:00 2001 From: Wim Van Sebroeck Date: Thu, 18 Sep 2008 12:26:15 +0000 Subject: [WATCHDOG] unlocked_ioctl changes Fix some drivers so that they use the unlocked_ioctl call. Signed-off-by: Wim Van Sebroeck --- drivers/watchdog/geodewdt.c | 6 +++--- drivers/watchdog/pnx4008_wdt.c | 4 ++-- drivers/watchdog/rc32434_wdt.c | 6 +++--- drivers/watchdog/rdc321x_wdt.c | 6 +++--- 4 files changed, 11 insertions(+), 11 deletions(-) diff --git a/drivers/watchdog/geodewdt.c b/drivers/watchdog/geodewdt.c index 614a5c7017b6..6799a6de66fe 100644 --- a/drivers/watchdog/geodewdt.c +++ b/drivers/watchdog/geodewdt.c @@ -130,8 +130,8 @@ static ssize_t geodewdt_write(struct file *file, const char __user *data, return len; } -static int geodewdt_ioctl(struct inode *inode, struct file *file, - unsigned int cmd, unsigned long arg) +static long geodewdt_ioctl(struct file *file, unsigned int cmd, + unsigned long arg) { void __user *argp = (void __user *)arg; int __user *p = argp; @@ -198,7 +198,7 @@ static const struct file_operations geodewdt_fops = { .owner = THIS_MODULE, .llseek = no_llseek, .write = geodewdt_write, - .ioctl = geodewdt_ioctl, + .unlocked_ioctl = geodewdt_ioctl, .open = geodewdt_open, .release = geodewdt_release, }; diff --git a/drivers/watchdog/pnx4008_wdt.c b/drivers/watchdog/pnx4008_wdt.c index 0ed84162437b..6d9f3d4a9987 100644 --- a/drivers/watchdog/pnx4008_wdt.c +++ b/drivers/watchdog/pnx4008_wdt.c @@ -173,8 +173,8 @@ static const struct watchdog_info ident = { .identity = "PNX4008 Watchdog", }; -static long pnx4008_wdt_ioctl(struct inode *inode, struct file *file, - unsigned int cmd, unsigned long arg) +static long pnx4008_wdt_ioctl(struct file *file, unsigned int cmd, + unsigned long arg) { int ret = -ENOTTY; int time; diff --git a/drivers/watchdog/rc32434_wdt.c b/drivers/watchdog/rc32434_wdt.c index 6756bcb009ed..c9c73b69c5e5 100644 --- a/drivers/watchdog/rc32434_wdt.c +++ b/drivers/watchdog/rc32434_wdt.c @@ -182,8 +182,8 @@ static ssize_t rc32434_wdt_write(struct file *file, const char *data, return 0; } -static int rc32434_wdt_ioctl(struct inode *inode, struct file *file, - unsigned int cmd, unsigned long arg) +static long rc32434_wdt_ioctl(struct file *file, unsigned int cmd, + unsigned long arg) { void __user *argp = (void __user *)arg; int new_timeout; @@ -242,7 +242,7 @@ static struct file_operations rc32434_wdt_fops = { .owner = THIS_MODULE, .llseek = no_llseek, .write = rc32434_wdt_write, - .ioctl = rc32434_wdt_ioctl, + .unlocked_ioctl = rc32434_wdt_ioctl, .open = rc32434_wdt_open, .release = rc32434_wdt_release, }; diff --git a/drivers/watchdog/rdc321x_wdt.c b/drivers/watchdog/rdc321x_wdt.c index 9108efa73e7d..bf92802f2bbe 100644 --- a/drivers/watchdog/rdc321x_wdt.c +++ b/drivers/watchdog/rdc321x_wdt.c @@ -144,8 +144,8 @@ static int rdc321x_wdt_release(struct inode *inode, struct file *file) return 0; } -static int rdc321x_wdt_ioctl(struct inode *inode, struct file *file, - unsigned int cmd, unsigned long arg) +static long rdc321x_wdt_ioctl(struct file *file, unsigned int cmd, + unsigned long arg) { void __user *argp = (void __user *)arg; unsigned int value; @@ -204,7 +204,7 @@ static ssize_t rdc321x_wdt_write(struct file *file, const char __user *buf, static const struct file_operations rdc321x_wdt_fops = { .owner = THIS_MODULE, .llseek = no_llseek, - .ioctl = rdc321x_wdt_ioctl, + .unlocked_ioctl = rdc321x_wdt_ioctl, .open = rdc321x_wdt_open, .write = rdc321x_wdt_write, .release = rdc321x_wdt_release, -- cgit v1.2.3 From 05e12e1c4c09cd35ac9f4e6af1e42b0036375d72 Mon Sep 17 00:00:00 2001 From: Ravikiran G Thirumalai Date: Mon, 22 Sep 2008 22:58:47 -0700 Subject: x86: fix 27-rc crash on vsmp due to paravirt during module load 27-rc fails to boot up if configured to use modules. Turns out vsmp_patch was marked __init, and vsmp_patch being the pvops 'patch' routine for vsmp, a call to vsmp_patch just turns out to execute a code page with series of 0xcc (POISON_FREE_INITMEM -- int3). vsmp_patch has been marked with __init ever since pvops, however, apply_paravirt can be called during module load causing calls to freed memory location. Since apply_paravirt can only be called during init/module load, make vsmp_patch with "__init_or_module" Signed-off-by: Ravikiran Thirumalai Signed-off-by: Ingo Molnar --- arch/x86/kernel/vsmp_64.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/kernel/vsmp_64.c b/arch/x86/kernel/vsmp_64.c index 0c029e8959c7..7766d36983fc 100644 --- a/arch/x86/kernel/vsmp_64.c +++ b/arch/x86/kernel/vsmp_64.c @@ -61,7 +61,7 @@ static void vsmp_irq_enable(void) native_restore_fl((flags | X86_EFLAGS_IF) & (~X86_EFLAGS_AC)); } -static unsigned __init vsmp_patch(u8 type, u16 clobbers, void *ibuf, +static unsigned __init_or_module vsmp_patch(u8 type, u16 clobbers, void *ibuf, unsigned long addr, unsigned len) { switch (type) { -- cgit v1.2.3 From fa748203175de7c08f2df80e5a0eeca40329b5e2 Mon Sep 17 00:00:00 2001 From: Rakib Mullick Date: Mon, 22 Sep 2008 14:55:45 -0700 Subject: sched: fix init_hrtick() section mismatch warning LD kernel/built-in.o WARNING: kernel/built-in.o(.text+0x326): Section mismatch in reference from the function init_hrtick() to the variable .cpuinit.data:hotplug_hrtick_nb.8 The function init_hrtick() references the variable __cpuinitdata hotplug_hrtick_nb.8. This is often because init_hrtick lacks a __cpuinitdata annotation or the annotation of hotplug_hrtick_nb.8 is wrong. Signed-off-by: Md.Rakib H. Mullick Signed-off-by: Andrew Morton Signed-off-by: Ingo Molnar --- kernel/sched.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/kernel/sched.c b/kernel/sched.c index 98890807375b..13dd2db9fb2d 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -1087,7 +1087,7 @@ hotplug_hrtick(struct notifier_block *nfb, unsigned long action, void *hcpu) return NOTIFY_DONE; } -static void init_hrtick(void) +static __init void init_hrtick(void) { hotcpu_notifier(hotplug_hrtick, 0); } -- cgit v1.2.3 From 6441402b1f173fa38e561d3cee7c01c32e5281ad Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Mon, 22 Sep 2008 18:46:37 +0200 Subject: clockevents: prevent cpu online to interfere with nohz Impact: rare hang which can be triggered on CPU online. tick_do_timer_cpu keeps track of the CPU which updates jiffies via do_timer. The value -1 is used to signal, that currently no CPU is doing this. There are two cases, where the variable can have this state: boot: necessary for systems where the boot cpu id can be != 0 nohz long idle sleep: When the CPU which did the jiffies update last goes into a long idle sleep it drops the update jiffies duty so another CPU which is not idle can pick it up and keep jiffies going. Using the same value for both situations is wrong, as the CPU online code can see the -1 state when the timer of the newly onlined CPU is setup. The setup for a newly onlined CPU goes through periodic mode and can pick up the do_timer duty without being aware of the nohz / highres mode of the already running system. Use two separate states and make them constants to avoid magic numbers confusion. Signed-off-by: Thomas Gleixner --- kernel/time/tick-common.c | 7 ++++--- kernel/time/tick-internal.h | 4 ++++ kernel/time/tick-sched.c | 8 ++++---- 3 files changed, 12 insertions(+), 7 deletions(-) diff --git a/kernel/time/tick-common.c b/kernel/time/tick-common.c index 019315ebf9de..b523d095decf 100644 --- a/kernel/time/tick-common.c +++ b/kernel/time/tick-common.c @@ -33,7 +33,7 @@ DEFINE_PER_CPU(struct tick_device, tick_cpu_device); */ ktime_t tick_next_period; ktime_t tick_period; -int tick_do_timer_cpu __read_mostly = -1; +int tick_do_timer_cpu __read_mostly = TICK_DO_TIMER_BOOT; DEFINE_SPINLOCK(tick_device_lock); /* @@ -148,7 +148,7 @@ static void tick_setup_device(struct tick_device *td, * If no cpu took the do_timer update, assign it to * this cpu: */ - if (tick_do_timer_cpu == -1) { + if (tick_do_timer_cpu == TICK_DO_TIMER_BOOT) { tick_do_timer_cpu = cpu; tick_next_period = ktime_get(); tick_period = ktime_set(0, NSEC_PER_SEC / HZ); @@ -300,7 +300,8 @@ static void tick_shutdown(unsigned int *cpup) if (*cpup == tick_do_timer_cpu) { int cpu = first_cpu(cpu_online_map); - tick_do_timer_cpu = (cpu != NR_CPUS) ? cpu : -1; + tick_do_timer_cpu = (cpu != NR_CPUS) ? cpu : + TICK_DO_TIMER_NONE; } spin_unlock_irqrestore(&tick_device_lock, flags); } diff --git a/kernel/time/tick-internal.h b/kernel/time/tick-internal.h index 6e9db9734aa6..e18014fadf95 100644 --- a/kernel/time/tick-internal.h +++ b/kernel/time/tick-internal.h @@ -1,6 +1,10 @@ /* * tick internal variable and functions used by low/high res code */ + +#define TICK_DO_TIMER_NONE -1 +#define TICK_DO_TIMER_BOOT -2 + DECLARE_PER_CPU(struct tick_device, tick_cpu_device); extern spinlock_t tick_device_lock; extern ktime_t tick_next_period; diff --git a/kernel/time/tick-sched.c b/kernel/time/tick-sched.c index a87b0468568b..31a14e8caac1 100644 --- a/kernel/time/tick-sched.c +++ b/kernel/time/tick-sched.c @@ -221,7 +221,7 @@ void tick_nohz_stop_sched_tick(int inidle) */ if (unlikely(!cpu_online(cpu))) { if (cpu == tick_do_timer_cpu) - tick_do_timer_cpu = -1; + tick_do_timer_cpu = TICK_DO_TIMER_NONE; } if (unlikely(ts->nohz_mode == NOHZ_MODE_INACTIVE)) @@ -303,7 +303,7 @@ void tick_nohz_stop_sched_tick(int inidle) * invoked. */ if (cpu == tick_do_timer_cpu) - tick_do_timer_cpu = -1; + tick_do_timer_cpu = TICK_DO_TIMER_NONE; ts->idle_sleeps++; @@ -468,7 +468,7 @@ static void tick_nohz_handler(struct clock_event_device *dev) * this duty, then the jiffies update is still serialized by * xtime_lock. */ - if (unlikely(tick_do_timer_cpu == -1)) + if (unlikely(tick_do_timer_cpu == TICK_DO_TIMER_NONE)) tick_do_timer_cpu = cpu; /* Check, if the jiffies need an update */ @@ -570,7 +570,7 @@ static enum hrtimer_restart tick_sched_timer(struct hrtimer *timer) * this duty, then the jiffies update is still serialized by * xtime_lock. */ - if (unlikely(tick_do_timer_cpu == -1)) + if (unlikely(tick_do_timer_cpu == TICK_DO_TIMER_NONE)) tick_do_timer_cpu = cpu; #endif -- cgit v1.2.3 From 4faac97d44ac27bdbb010a9c3597401a8f89341f Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Mon, 22 Sep 2008 18:54:29 +0200 Subject: x86: prevent stale state of c1e_mask across CPU offline/online Impact: hang which happens across CPU offline/online on AMD C1E systems. When a CPU goes offline then the corresponding bit in the broadcast mask is cleared. For AMD C1E enabled CPUs we do not reenable the broadcast when the CPU comes online again as we do not clear the corresponding bit in the c1e_mask, which keeps track which CPUs have been switched to broadcast already. So on those !$@#& machines we never switch back to broadcasting after a CPU offline/online cycle. Clear the bit when the CPU plays dead. Signed-off-by: Thomas Gleixner --- arch/x86/kernel/process.c | 11 ++++++++--- arch/x86/kernel/process_32.c | 1 + arch/x86/kernel/process_64.c | 2 ++ include/asm-x86/idle.h | 2 ++ 4 files changed, 13 insertions(+), 3 deletions(-) diff --git a/arch/x86/kernel/process.c b/arch/x86/kernel/process.c index 7fc4d5b0a6a0..2e2247117f6e 100644 --- a/arch/x86/kernel/process.c +++ b/arch/x86/kernel/process.c @@ -246,6 +246,14 @@ static int __cpuinit check_c1e_idle(const struct cpuinfo_x86 *c) return 1; } +static cpumask_t c1e_mask = CPU_MASK_NONE; +static int c1e_detected; + +void c1e_remove_cpu(int cpu) +{ + cpu_clear(cpu, c1e_mask); +} + /* * C1E aware idle routine. We check for C1E active in the interrupt * pending message MSR. If we detect C1E, then we handle it the same @@ -253,9 +261,6 @@ static int __cpuinit check_c1e_idle(const struct cpuinfo_x86 *c) */ static void c1e_idle(void) { - static cpumask_t c1e_mask = CPU_MASK_NONE; - static int c1e_detected; - if (need_resched()) return; diff --git a/arch/x86/kernel/process_32.c b/arch/x86/kernel/process_32.c index 3b7a1ddcc0bc..4b3cfdf54216 100644 --- a/arch/x86/kernel/process_32.c +++ b/arch/x86/kernel/process_32.c @@ -88,6 +88,7 @@ static void cpu_exit_clear(void) cpu_clear(cpu, cpu_callin_map); numa_remove_cpu(cpu); + c1e_remove_cpu(cpu); } /* We don't actually take CPU down, just spin without interrupts. */ diff --git a/arch/x86/kernel/process_64.c b/arch/x86/kernel/process_64.c index 71553b664e2a..e12e0e4dd256 100644 --- a/arch/x86/kernel/process_64.c +++ b/arch/x86/kernel/process_64.c @@ -93,6 +93,8 @@ DECLARE_PER_CPU(int, cpu_state); static inline void play_dead(void) { idle_task_exit(); + c1e_remove_cpu(raw_smp_processor_id()); + mb(); /* Ack it */ __get_cpu_var(cpu_state) = CPU_DEAD; diff --git a/include/asm-x86/idle.h b/include/asm-x86/idle.h index d240e5b30a45..cbb649123612 100644 --- a/include/asm-x86/idle.h +++ b/include/asm-x86/idle.h @@ -10,4 +10,6 @@ void idle_notifier_register(struct notifier_block *n); void enter_idle(void); void exit_idle(void); +void c1e_remove_cpu(int cpu); + #endif -- cgit v1.2.3 From 49d670fb8dd62d3ed4e3ed2513538ea65b051aed Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Mon, 22 Sep 2008 18:56:01 +0200 Subject: clockevents: prevent stale tick_next_period for onlining CPUs Impact: possible hang on CPU onlining in timer one shot mode. The tick_next_period variable is only used during boot on nohz/highres enabled systems, but for CPU onlining it needs to be maintained when the per cpu clock events device operates in one shot mode. Signed-off-by: Thomas Gleixner --- kernel/time/tick-sched.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/kernel/time/tick-sched.c b/kernel/time/tick-sched.c index 31a14e8caac1..39019b3f7621 100644 --- a/kernel/time/tick-sched.c +++ b/kernel/time/tick-sched.c @@ -75,6 +75,9 @@ static void tick_do_update_jiffies64(ktime_t now) incr * ticks); } do_timer(++ticks); + + /* Keep the tick_next_period variable up to date */ + tick_next_period = ktime_add(last_jiffies_update, tick_period); } write_sequnlock(&xtime_lock); } -- cgit v1.2.3 From 302745699c1b675b5d2a1af87271de10e4d96b6a Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Mon, 22 Sep 2008 19:02:25 +0200 Subject: clockevents: check broadcast device not tick device Impact: Possible hang on CPU online observed on AMD C1E machines. The broadcast setup code looks at the mode of the tick device to determine whether it needs to be shut down or setup. This is wrong when the broadcast mode is set to one shot already. This can happen when a CPU is brought online as it goes through the periodic setup first. The problem went unnoticed as sane systems do not call into that code before the switch to one shot for the clock event device happens. The AMD C1E idle routine switches over immediately and thereby shuts down the just setup device before the first interrupt happens. Signed-off-by: Thomas Gleixner --- kernel/time/tick-broadcast.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/kernel/time/tick-broadcast.c b/kernel/time/tick-broadcast.c index f1f3eee28113..e2b66d1c8ca5 100644 --- a/kernel/time/tick-broadcast.c +++ b/kernel/time/tick-broadcast.c @@ -235,7 +235,7 @@ static void tick_do_broadcast_on_off(void *why) case CLOCK_EVT_NOTIFY_BROADCAST_FORCE: if (!cpu_isset(cpu, tick_broadcast_mask)) { cpu_set(cpu, tick_broadcast_mask); - if (td->mode == TICKDEV_MODE_PERIODIC) + if (bc->mode == TICKDEV_MODE_PERIODIC) clockevents_shutdown(dev); } if (*reason == CLOCK_EVT_NOTIFY_BROADCAST_FORCE) @@ -245,7 +245,7 @@ static void tick_do_broadcast_on_off(void *why) if (!tick_broadcast_force && cpu_isset(cpu, tick_broadcast_mask)) { cpu_clear(cpu, tick_broadcast_mask); - if (td->mode == TICKDEV_MODE_PERIODIC) + if (bc->mode == TICKDEV_MODE_PERIODIC) tick_setup_periodic(dev, 0); } break; -- cgit v1.2.3 From 27ce4cb4a0c7cf59b9a9952266883862f2e4c99f Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Mon, 22 Sep 2008 19:04:02 +0200 Subject: clockevents: prevent mode mismatch on cpu online Impact: timer hang on CPU online observed on AMD C1E systems When a CPU is brought online then the broadcast machinery can be in the one shot state already. Check this and setup the timer device of the new CPU in one shot mode so the broadcast code can pick up the next_event value correctly. Another AMD C1E oddity, as we switch to broadcast immediately and not after the full bring up via the ACPI cpu idle code. Signed-off-by: Thomas Gleixner --- kernel/time/tick-broadcast.c | 8 ++++++++ kernel/time/tick-common.c | 3 ++- kernel/time/tick-internal.h | 2 ++ 3 files changed, 12 insertions(+), 1 deletion(-) diff --git a/kernel/time/tick-broadcast.c b/kernel/time/tick-broadcast.c index e2b66d1c8ca5..bd7034542399 100644 --- a/kernel/time/tick-broadcast.c +++ b/kernel/time/tick-broadcast.c @@ -575,4 +575,12 @@ void tick_shutdown_broadcast_oneshot(unsigned int *cpup) spin_unlock_irqrestore(&tick_broadcast_lock, flags); } +/* + * Check, whether the broadcast device is in one shot mode + */ +int tick_broadcast_oneshot_active(void) +{ + return tick_broadcast_device.mode == TICKDEV_MODE_ONESHOT; +} + #endif diff --git a/kernel/time/tick-common.c b/kernel/time/tick-common.c index b523d095decf..df12434b43ca 100644 --- a/kernel/time/tick-common.c +++ b/kernel/time/tick-common.c @@ -109,7 +109,8 @@ void tick_setup_periodic(struct clock_event_device *dev, int broadcast) if (!tick_device_is_functional(dev)) return; - if (dev->features & CLOCK_EVT_FEAT_PERIODIC) { + if ((dev->features & CLOCK_EVT_FEAT_PERIODIC) && + !tick_broadcast_oneshot_active()) { clockevents_set_mode(dev, CLOCK_EVT_MODE_PERIODIC); } else { unsigned long seq; diff --git a/kernel/time/tick-internal.h b/kernel/time/tick-internal.h index e18014fadf95..55c3f4be6077 100644 --- a/kernel/time/tick-internal.h +++ b/kernel/time/tick-internal.h @@ -35,6 +35,7 @@ extern void tick_broadcast_oneshot_control(unsigned long reason); extern void tick_broadcast_switch_to_oneshot(void); extern void tick_shutdown_broadcast_oneshot(unsigned int *cpup); extern int tick_resume_broadcast_oneshot(struct clock_event_device *bc); +extern int tick_broadcast_oneshot_active(void); # else /* BROADCAST */ static inline void tick_broadcast_setup_oneshot(struct clock_event_device *bc) { @@ -43,6 +44,7 @@ static inline void tick_broadcast_setup_oneshot(struct clock_event_device *bc) static inline void tick_broadcast_oneshot_control(unsigned long reason) { } static inline void tick_broadcast_switch_to_oneshot(void) { } static inline void tick_shutdown_broadcast_oneshot(unsigned int *cpup) { } +static inline int tick_broadcast_oneshot_active(void) { return 0; } # endif /* !BROADCAST */ #else /* !ONESHOT */ -- cgit v1.2.3 From a8d6829044901a67732904be5f1eacdf8539604f Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Mon, 22 Sep 2008 19:02:25 +0200 Subject: x86: prevent C-states hang on AMD C1E enabled machines Impact: System hang when AMD C1E machines switch into C2/C3 AMD C1E enabled systems do not work with normal ACPI C-states even if the BIOS is advertising them. Limit the C-states to C1 for the ACPI processor idle code. Signed-off-by: Thomas Gleixner --- arch/x86/kernel/process.c | 1 + include/asm-x86/acpi.h | 2 ++ include/asm-x86/cpufeature.h | 1 + 3 files changed, 4 insertions(+) diff --git a/arch/x86/kernel/process.c b/arch/x86/kernel/process.c index 2e2247117f6e..d8c2a299bfe5 100644 --- a/arch/x86/kernel/process.c +++ b/arch/x86/kernel/process.c @@ -272,6 +272,7 @@ static void c1e_idle(void) c1e_detected = 1; mark_tsc_unstable("TSC halt in C1E"); printk(KERN_INFO "System has C1E enabled\n"); + set_cpu_cap(&boot_cpu_data, X86_FEATURE_AMDC1E); } } diff --git a/include/asm-x86/acpi.h b/include/asm-x86/acpi.h index 635d764dc13e..35d1743b57ac 100644 --- a/include/asm-x86/acpi.h +++ b/include/asm-x86/acpi.h @@ -140,6 +140,8 @@ static inline unsigned int acpi_processor_cstate_check(unsigned int max_cstate) boot_cpu_data.x86_model <= 0x05 && boot_cpu_data.x86_mask < 0x0A) return 1; + else if (boot_cpu_has(X86_FEATURE_AMDC1E)) + return 1; else return max_cstate; } diff --git a/include/asm-x86/cpufeature.h b/include/asm-x86/cpufeature.h index 9489283a4bcf..cfcfb0a806ba 100644 --- a/include/asm-x86/cpufeature.h +++ b/include/asm-x86/cpufeature.h @@ -81,6 +81,7 @@ #define X86_FEATURE_LFENCE_RDTSC (3*32+18) /* Lfence synchronizes RDTSC */ #define X86_FEATURE_11AP (3*32+19) /* Bad local APIC aka 11AP */ #define X86_FEATURE_NOPL (3*32+20) /* The NOPL (0F 1F) instructions */ +#define X86_FEATURE_AMDC1E (3*32+21) /* AMD C1E detected */ /* Intel-defined CPU features, CPUID level 0x00000001 (ecx), word 4 */ #define X86_FEATURE_XMM3 (4*32+ 0) /* Streaming SIMD Extensions-3 */ -- cgit v1.2.3 From 09bfeea13cea843fb03eaa96b5d891fa0abdcc90 Mon Sep 17 00:00:00 2001 From: Andreas Herrmann Date: Thu, 18 Sep 2008 21:12:10 +0200 Subject: x86: c1e_idle: don't mark TSC unstable if CPU has invariant TSC Impact: Functional TSC is marked unstable on AMD family 0x10 and 0x11 CPUs. This would be wrong because for those CPUs "invariant TSC" means: "The TSC counts at the same rate in all P-states, all C states, S0, or S1" (See "Processor BIOS and Kernel Developer's Guides" for those CPUs.) [ tglx: Changed C1E to AMD C1E in the printks to avoid confusion with Intel C1E ] Signed-off-by: Andreas Herrmann Signed-off-by: Thomas Gleixner --- arch/x86/kernel/process.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/arch/x86/kernel/process.c b/arch/x86/kernel/process.c index d8c2a299bfe5..876e91890777 100644 --- a/arch/x86/kernel/process.c +++ b/arch/x86/kernel/process.c @@ -270,8 +270,9 @@ static void c1e_idle(void) rdmsr(MSR_K8_INT_PENDING_MSG, lo, hi); if (lo & K8_INTP_C1E_ACTIVE_MASK) { c1e_detected = 1; - mark_tsc_unstable("TSC halt in C1E"); - printk(KERN_INFO "System has C1E enabled\n"); + if (!boot_cpu_has(X86_FEATURE_CONSTANT_TSC)) + mark_tsc_unstable("TSC halt in AMD C1E"); + printk(KERN_INFO "System has AMD C1E enabled\n"); set_cpu_cap(&boot_cpu_data, X86_FEATURE_AMDC1E); } } -- cgit v1.2.3 From f8e256c687eb53850685747757c8d75e58756e15 Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Tue, 23 Sep 2008 13:00:57 +0200 Subject: timers: fix build error in !oneshot case MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit kernel/time/tick-common.c: In function ‘tick_setup_periodic’: kernel/time/tick-common.c:113: error: implicit declaration of function ‘tick_broadcast_oneshot_active’ Signed-off-by: Ingo Molnar --- kernel/time/tick-internal.h | 1 + 1 file changed, 1 insertion(+) diff --git a/kernel/time/tick-internal.h b/kernel/time/tick-internal.h index 55c3f4be6077..469248782c23 100644 --- a/kernel/time/tick-internal.h +++ b/kernel/time/tick-internal.h @@ -74,6 +74,7 @@ static inline int tick_resume_broadcast_oneshot(struct clock_event_device *bc) { return 0; } +static inline int tick_broadcast_oneshot_active(void) { return 0; } #endif /* !TICK_ONESHOT */ /* -- cgit v1.2.3 From b0b8daf7849cc98217ca018fbe82c61cd2b735bc Mon Sep 17 00:00:00 2001 From: Liam Girdwood Date: Thu, 18 Sep 2008 14:36:37 +0100 Subject: ALSA: ASoC: maintainers - update email address for Liam Girdwood This patch updates the maintainers email address for Liam Girdwood and adds a URL for the ASoC website. Signed-off-by: Liam Girdwood Signed-off-by: Takashi Iwai --- MAINTAINERS | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/MAINTAINERS b/MAINTAINERS index 28c69aaefcd9..657e0ffe2df5 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -3826,11 +3826,12 @@ S: Maintained SOUND - SOC LAYER / DYNAMIC AUDIO POWER MANAGEMENT P: Liam Girdwood -M: liam.girdwood@wolfsonmicro.com +M: lrg@slimlogic.co.uk P: Mark Brown M: broonie@opensource.wolfsonmicro.com T: git opensource.wolfsonmicro.com/linux-2.6-asoc L: alsa-devel@alsa-project.org (subscribers-only) +W: http://alsa-project.org/main/index.php/ASoC S: Supported SPI SUBSYSTEM -- cgit v1.2.3 From 683f40d7e7eee06811db43cb4c45349eab0d539e Mon Sep 17 00:00:00 2001 From: Akinobu Mita Date: Mon, 22 Sep 2008 13:57:41 -0700 Subject: ibmasr: remove unnecessary spin_unlock() __asr_toggle() is always called with asr_lock held. But there is unnecessary spin_unlock() call in __asr_toggle(). Signed-off-by: Akinobu Mita Cc: Wim Van Sebroeck Acked-by: Andrey Panin Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/watchdog/ibmasr.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/watchdog/ibmasr.c b/drivers/watchdog/ibmasr.c index b82405cfb4cd..89fcefcc8510 100644 --- a/drivers/watchdog/ibmasr.c +++ b/drivers/watchdog/ibmasr.c @@ -85,7 +85,6 @@ static void __asr_toggle(void) outb(reg & ~asr_toggle_mask, asr_write_addr); reg = inb(asr_read_addr); - spin_unlock(&asr_lock); } static void asr_toggle(void) -- cgit v1.2.3 From c32a162fd420fe8dfb049db941b2438061047fcc Mon Sep 17 00:00:00 2001 From: "Kirill A. Shutemov" Date: Mon, 22 Sep 2008 13:57:43 -0700 Subject: smb.h: do not include linux/time.h in userspace linux/time.h conflicts with time.h from glibc It breaks building smbmount from samba. It's regression introduced by commit 76308da (" smb.h: uses struct timespec but didn't include linux/time.h"). Signed-off-by: Kirill A. Shutemov Cc: [2.6.26.x] Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/smb.h | 2 ++ 1 file changed, 2 insertions(+) diff --git a/include/linux/smb.h b/include/linux/smb.h index caa43b2370cb..82fefddc5987 100644 --- a/include/linux/smb.h +++ b/include/linux/smb.h @@ -11,7 +11,9 @@ #include #include +#ifdef __KERNEL__ #include +#endif enum smb_protocol { SMB_PROTOCOL_NONE, -- cgit v1.2.3 From 39f00c087d31f668eb6eaf97508af22a32c5b1d9 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Mon, 22 Sep 2008 13:57:44 -0700 Subject: kernel-doc: allow structs whose members are all private Struct members may be marked as private by using /* private: */ before them, as noted in Documentation/kernel-doc-nano-HOWTO.txt Fix kernel-doc to handle structs whose members are all private; otherwise invalid XML is generated: xmlto: input does not validate (status 3) linux-2.6.27-rc6-git4/Documentation/DocBook/debugobjects.xml:146: element variablelist: validity error : Element variablelist content does not follow the DTD, expecting ((title , titleabbrev?)? , varlistentry+), got () Document linux-2.6.27-rc6-git4/Documentation/DocBook/debugobjects.xml does not validate make[1]: *** [Documentation/DocBook/debugobjects.html] Error 3 Signed-off-by: Randy Dunlap Reported-by: Roland McGrath Cc: Roland McGrath Cc: Christoph Hellwig Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- scripts/kernel-doc | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/scripts/kernel-doc b/scripts/kernel-doc index ff787e6ff8ed..44ee94d2ab76 100755 --- a/scripts/kernel-doc +++ b/scripts/kernel-doc @@ -781,6 +781,7 @@ sub output_struct_xml(%) { print " \n"; print " Members\n"; + if ($#{$args{'parameterlist'}} >= 0) { print " \n"; foreach $parameter (@{$args{'parameterlist'}}) { ($parameter =~ /^#/) && next; @@ -798,6 +799,9 @@ sub output_struct_xml(%) { print " \n"; } print " \n"; + } else { + print " \n None\n \n"; + } print " \n"; output_section_xml(@_); -- cgit v1.2.3 From f9092f358bc2ec5367621478811f046f82873376 Mon Sep 17 00:00:00 2001 From: Jonathan Steel Date: Mon, 22 Sep 2008 13:57:45 -0700 Subject: kexec: fix segmentation fault in kimage_add_entry A segmentation fault can occur in kimage_add_entry in kexec.c when loading a kernel image into memory. The fault occurs because a page is requested by calling kimage_alloc_page with gfp_mask GFP_KERNEL and the function may actually return a page with gfp_mask GFP_HIGHUSER. The high mem page is returned because it was swapped with the kernel page due to the kernel page being a page that will shortly be copied to. This patch ensures that kimage_alloc_page returns a page that was created with the correct gfp flags. I have verified the change and fixed the whitespace damage of the original patch. Jonathan did a great job of tracking this down after he hit the problem. -- Eric Signed-off-by: Jonathan Steel Signed-off-by: Eric W. Biederman Acked-by: Simon Horman Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- kernel/kexec.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/kernel/kexec.c b/kernel/kexec.c index 59f3f0df35d4..aef265325cd3 100644 --- a/kernel/kexec.c +++ b/kernel/kexec.c @@ -753,8 +753,14 @@ static struct page *kimage_alloc_page(struct kimage *image, *old = addr | (*old & ~PAGE_MASK); /* The old page I have found cannot be a - * destination page, so return it. + * destination page, so return it if it's + * gfp_flags honor the ones passed in. */ + if (!(gfp_mask & __GFP_HIGHMEM) && + PageHighMem(old_page)) { + kimage_free_pages(old_page); + continue; + } addr = old_addr; page = old_page; break; -- cgit v1.2.3 From 6675ce13ed783f88ea5d82f0d855462b76ff0dad Mon Sep 17 00:00:00 2001 From: Marin Mitov Date: Mon, 22 Sep 2008 13:57:46 -0700 Subject: Documentation/DMA-mapping.txt: update for pci_dma_mapping_error() changes Make the example code consistent with changed API. Signed-off-by: Marin Mitov Acked-by: FUJITA Tomonori Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- Documentation/DMA-mapping.txt | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/DMA-mapping.txt b/Documentation/DMA-mapping.txt index b463ecd0c7ce..c74fec8c2351 100644 --- a/Documentation/DMA-mapping.txt +++ b/Documentation/DMA-mapping.txt @@ -740,7 +740,7 @@ failure can be determined by: dma_addr_t dma_handle; dma_handle = pci_map_single(pdev, addr, size, direction); - if (pci_dma_mapping_error(dma_handle)) { + if (pci_dma_mapping_error(pdev, dma_handle)) { /* * reduce current DMA mapping usage, * delay and try again later or -- cgit v1.2.3 From 2d4c8266774188cda7f7e612e6dfb8ad12c579d5 Mon Sep 17 00:00:00 2001 From: Michael Kerrisk Date: Mon, 22 Sep 2008 13:57:49 -0700 Subject: sys_paccept: disable paccept() until API design is resolved The reasons for disabling paccept() are as follows: * The API is more complex than needed. There is AFAICS no demonstrated use case that the sigset argument of this syscall serves that couldn't equally be served by the use of pselect/ppoll/epoll_pwait + traditional accept(). Roland seems to concur with this opinion (http://thread.gmane.org/gmane.linux.kernel/723953/focus=732255). I have (more than once) asked Ulrich to explain otherwise (http://thread.gmane.org/gmane.linux.kernel/723952/focus=731018), but he does not respond, so one is left to assume that he doesn't know of such a case. * The use of a sigset argument is not consistent with other I/O APIs that can block on a single file descriptor (e.g., read(), recv(), connect()). * The behavior of paccept() when interrupted by a signal is IMO strange: the kernel restarts the system call if SA_RESTART was set for the handler. I think that it should not do this -- that it should behave consistently with paccept()/ppoll()/epoll_pwait(), which never restart, regardless of SA_RESTART. The reasoning here is that the very purpose of paccept() is to wait for a connection or a signal, and that restarting in the latter case is probably never useful. (Note: Roland disagrees on this point, believing that rather paccept() should be consistent with accept() in its behavior wrt EINTR (http://thread.gmane.org/gmane.linux.kernel/723953/focus=732255).) I believe that instead, a simpler API, consistent with Ulrich's other recent additions, is preferable: accept4(int fd, struct sockaddr *sa, socklen_t *salen, ind flags); (This simpler API was originally proposed by Ulrich: http://thread.gmane.org/gmane.linux.network/92072) If this simpler API is added, then if we later decide that the sigset argument really is required, then a suitable bit in 'flags' could be added to indicate the presence of the sigset argument. At this point, I am hoping we either will get a counter-argument from Ulrich about why we really do need paccept()'s sigset argument, or that he will resubmit the original accept4() patch. Signed-off-by: Michael Kerrisk Cc: David Miller Cc: Davide Libenzi Cc: Alan Cox Cc: Ulrich Drepper Cc: Jakub Jelinek Cc: Roland McGrath Cc: Oleg Nesterov Cc: Christoph Hellwig Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- net/socket.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/net/socket.c b/net/socket.c index 8ef8ba81b9e2..3e8d4e35c08f 100644 --- a/net/socket.c +++ b/net/socket.c @@ -1511,6 +1511,7 @@ out_fd: goto out_put; } +#if 0 #ifdef HAVE_SET_RESTORE_SIGMASK asmlinkage long sys_paccept(int fd, struct sockaddr __user *upeer_sockaddr, int __user *upeer_addrlen, @@ -1564,6 +1565,7 @@ asmlinkage long sys_paccept(int fd, struct sockaddr __user *upeer_sockaddr, return do_accept(fd, upeer_sockaddr, upeer_addrlen, flags); } #endif +#endif asmlinkage long sys_accept(int fd, struct sockaddr __user *upeer_sockaddr, int __user *upeer_addrlen) -- cgit v1.2.3 From db203d53d474aa068984e409d807628f5841da1b Mon Sep 17 00:00:00 2001 From: Nick Piggin Date: Mon, 22 Sep 2008 13:57:50 -0700 Subject: mm: tiny-shmem fix lock ordering: mmap_sem vs i_mutex tiny-shmem calls do_truncate in shmem_file_setup. do_truncate takes i_mutex, and shmem_file_setup is called with mmap_sem held. However i_mutex nests outside mmap_sem. Copy the code in shmem.c to avoid this problem. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Nick Piggin Reported-and-tested-by: Ingo Molnar Cc: Peter Zijlstra Cc: Matt Mackall Cc: Hugh Dickins Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/tiny-shmem.c | 24 +++++++++--------------- 1 file changed, 9 insertions(+), 15 deletions(-) diff --git a/mm/tiny-shmem.c b/mm/tiny-shmem.c index ae532f501943..d17cb6f6ab10 100644 --- a/mm/tiny-shmem.c +++ b/mm/tiny-shmem.c @@ -65,31 +65,25 @@ struct file *shmem_file_setup(char *name, loff_t size, unsigned long flags) if (!dentry) goto put_memory; - error = -ENOSPC; - inode = ramfs_get_inode(root->d_sb, S_IFREG | S_IRWXUGO, 0); - if (!inode) - goto put_dentry; - - d_instantiate(dentry, inode); error = -ENFILE; - file = alloc_file(shm_mnt, dentry, FMODE_WRITE | FMODE_READ, - &ramfs_file_operations); + file = get_empty_filp(); if (!file) goto put_dentry; - inode->i_nlink = 0; /* It is unlinked */ - - /* notify everyone as to the change of file size */ - error = do_truncate(dentry, size, 0, file); - if (error < 0) + error = -ENOSPC; + inode = ramfs_get_inode(root->d_sb, S_IFREG | S_IRWXUGO, 0); + if (!inode) goto close_file; + d_instantiate(dentry, inode); + inode->i_size = size; + inode->i_nlink = 0; /* It is unlinked */ + init_file(file, shm_mnt, dentry, FMODE_WRITE | FMODE_READ, + &ramfs_file_operations); return file; close_file: put_filp(file); - return ERR_PTR(error); - put_dentry: dput(dentry); put_memory: -- cgit v1.2.3 From b4d19cc84e8e6838f4aa0b26b3afcdc8c7f71505 Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Mon, 22 Sep 2008 13:57:51 -0700 Subject: Documentation/sysctl/kernel.txt: fix softlockup_thresh description - s/s/seconds/ - s/10 seconds/60 seconds/ - Mention the zero-disables-it feature. Cc: Ingo Molnar Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- Documentation/sysctl/kernel.txt | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/Documentation/sysctl/kernel.txt b/Documentation/sysctl/kernel.txt index 276a7e637822..e1ff0d920a5c 100644 --- a/Documentation/sysctl/kernel.txt +++ b/Documentation/sysctl/kernel.txt @@ -351,9 +351,10 @@ kernel. This value defaults to SHMMAX. softlockup_thresh: -This value can be used to lower the softlockup tolerance -threshold. The default threshold is 10s. If a cpu is locked up -for 10s, the kernel complains. Valid values are 1-60s. +This value can be used to lower the softlockup tolerance threshold. The +default threshold is 60 seconds. If a cpu is locked up for 60 seconds, +the kernel complains. Valid values are 1-60 seconds. Setting this +tunable to zero will disable the softlockup detection altogether. ============================================================== -- cgit v1.2.3 From a10cebf56ca7e7c034d1b6646230c6553e478967 Mon Sep 17 00:00:00 2001 From: Daisuke Nishimura Date: Mon, 22 Sep 2008 13:57:52 -0700 Subject: memcg: check under limit at shrink_usage Current memory cgroup(both in mainline and -mm) doesn't account swap caches as memory(swap cache support is dropped temporarily now). So try_to_free_mem_cgroup_pages doesn't reflect the count of pages that have been moved to swap cache. But this makes mem_cgroup_shrink_usage fail easily if most of the pages are anon/shmem, and then shmem_getpage returns -ENOMEM and the process will be killed. This patch adds res_counter_check_under_limit to avoid these cases. BTW, even if swap cache support is enabled again, if a process is moved to another cgroup, which has been just made, between precharge and shrink_usage in shmem_getpage, shrink_usage may fail just because there is no pages to reclaim. So this change would make sense anyway. Signed-off-by: Daisuke Nishimura Cc: Balbir Singh Cc: Pavel Emelyanov Cc: KAMEZAWA Hiroyuki Cc: Hugh Dickins Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/memcontrol.c | 1 + 1 file changed, 1 insertion(+) diff --git a/mm/memcontrol.c b/mm/memcontrol.c index 0f1f7a7374ba..c0500e4d3a2f 100644 --- a/mm/memcontrol.c +++ b/mm/memcontrol.c @@ -806,6 +806,7 @@ int mem_cgroup_shrink_usage(struct mm_struct *mm, gfp_t gfp_mask) do { progress = try_to_free_mem_cgroup_pages(mem, gfp_mask); + progress += res_counter_check_under_limit(&mem->res); } while (!progress && --retry); css_put(&mem->css); -- cgit v1.2.3 From f05596dbc922276ed675c713519220bae8042e32 Mon Sep 17 00:00:00 2001 From: Anti Sullin Date: Mon, 22 Sep 2008 13:57:54 -0700 Subject: atmel_serial: update the powersave handler to match serial core This problem seems to be unnoticed so far: http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=b3b708fa2780cd2b5d8266a8f0c3a1cab364d4d2 has changed the serial core behavior to not to suspend the port if the device is enabled as a wakeup source. If the AT91 system goes to slow clock mode, the port should be suspended always and the clocks should be switched off. The patch attached updates the atmel_serial driver to match the changes in serial core. Also, the interrupts are disabled when the clock is disabled. If we disable the clock with interrupts enabled, an interrupt may get stuck. If this is the DBGU interrupt, this blocks the OR logic at system controller and thus all other sysc interrupts. Signed-off-by: Anti Sullin Signed-off-by: Haavard Skinnemoen Cc: Michael Trimarchi Cc: Andrew Victor Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/serial/atmel_serial.c | 32 +++++++++++++++++++------------- 1 file changed, 19 insertions(+), 13 deletions(-) diff --git a/drivers/serial/atmel_serial.c b/drivers/serial/atmel_serial.c index 3a6da80b081c..61fb8b6d19af 100644 --- a/drivers/serial/atmel_serial.c +++ b/drivers/serial/atmel_serial.c @@ -131,7 +131,8 @@ struct atmel_uart_char { struct atmel_uart_port { struct uart_port uart; /* uart */ struct clk *clk; /* uart clock */ - unsigned short suspended; /* is port suspended? */ + int may_wakeup; /* cached value of device_may_wakeup for times we need to disable it */ + u32 backup_imr; /* IMR saved during suspend */ int break_active; /* break being received */ short use_dma_rx; /* enable PDC receiver */ @@ -984,8 +985,15 @@ static void atmel_serial_pm(struct uart_port *port, unsigned int state, * This is called on uart_open() or a resume event. */ clk_enable(atmel_port->clk); + + /* re-enable interrupts if we disabled some on suspend */ + UART_PUT_IER(port, atmel_port->backup_imr); break; case 3: + /* Back up the interrupt mask and disable all interrupts */ + atmel_port->backup_imr = UART_GET_IMR(port); + UART_PUT_IDR(port, -1); + /* * Disable the peripheral clock for this serial port. * This is called on uart_close() or a suspend event. @@ -1475,13 +1483,12 @@ static int atmel_serial_suspend(struct platform_device *pdev, cpu_relax(); } - if (device_may_wakeup(&pdev->dev) - && !atmel_serial_clk_will_stop()) - enable_irq_wake(port->irq); - else { - uart_suspend_port(&atmel_uart, port); - atmel_port->suspended = 1; - } + /* we can not wake up if we're running on slow clock */ + atmel_port->may_wakeup = device_may_wakeup(&pdev->dev); + if (atmel_serial_clk_will_stop()) + device_set_wakeup_enable(&pdev->dev, 0); + + uart_suspend_port(&atmel_uart, port); return 0; } @@ -1491,11 +1498,8 @@ static int atmel_serial_resume(struct platform_device *pdev) struct uart_port *port = platform_get_drvdata(pdev); struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); - if (atmel_port->suspended) { - uart_resume_port(&atmel_uart, port); - atmel_port->suspended = 0; - } else - disable_irq_wake(port->irq); + uart_resume_port(&atmel_uart, port); + device_set_wakeup_enable(&pdev->dev, atmel_port->may_wakeup); return 0; } @@ -1513,6 +1517,8 @@ static int __devinit atmel_serial_probe(struct platform_device *pdev) BUILD_BUG_ON(!is_power_of_2(ATMEL_SERIAL_RINGSIZE)); port = &atmel_ports[pdev->id]; + port->backup_imr = 0; + atmel_init_port(port, pdev); if (!atmel_use_dma_rx(&port->uart)) { -- cgit v1.2.3 From 44ea91c597ae4641d9ac21b8bbba0795d2f4261e Mon Sep 17 00:00:00 2001 From: James Bottomley Date: Sat, 20 Sep 2008 00:31:50 +0000 Subject: [SCSI] Fix hang with split requests Sometimes, particularly for USB devices with the last sector bug, requests get completed in chunks. There's a bug in this in that if one of the chunks gets an error, we complete that chunk with an error but never move on to the remaining ones, leading to the request hanging (because it's not fully completed). Fix this by completing all remaining chunks if an error is encountered. Cc: Alan Stern Signed-off-by: James Bottomley --- drivers/scsi/scsi_lib.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c index ff5d56b3ee4d..62307bd794a9 100644 --- a/drivers/scsi/scsi_lib.c +++ b/drivers/scsi/scsi_lib.c @@ -852,7 +852,7 @@ static void scsi_end_bidi_request(struct scsi_cmnd *cmd) void scsi_io_completion(struct scsi_cmnd *cmd, unsigned int good_bytes) { int result = cmd->result; - int this_count = scsi_bufflen(cmd); + int this_count; struct request_queue *q = cmd->device->request_queue; struct request *req = cmd->request; int error = 0; @@ -908,6 +908,7 @@ void scsi_io_completion(struct scsi_cmnd *cmd, unsigned int good_bytes) */ if (scsi_end_request(cmd, error, good_bytes, result == 0) == NULL) return; + this_count = blk_rq_bytes(req); /* good_bytes = 0, or (inclusive) there were leftovers and * result = 0, so scsi_end_request couldn't retry. -- cgit v1.2.3 From c9bab96bbfdda59fa8a35ba536c22e66055669e5 Mon Sep 17 00:00:00 2001 From: Kevin Lloyd Date: Tue, 26 Aug 2008 18:30:45 -0700 Subject: USB Storage: Sierra: Non-configurable TRU-Install This patch alters the Sierra Mass Storage patch so that it is non-configurable. Signed-off-by: Kevin Lloyd Signed-off-by: Greg Kroah-Hartman --- drivers/usb/storage/Kconfig | 12 ------------ drivers/usb/storage/Makefile | 3 +-- drivers/usb/storage/unusual_devs.h | 2 -- drivers/usb/storage/usb.c | 2 -- 4 files changed, 1 insertion(+), 18 deletions(-) diff --git a/drivers/usb/storage/Kconfig b/drivers/usb/storage/Kconfig index c76034672c18..3d9249632ae1 100644 --- a/drivers/usb/storage/Kconfig +++ b/drivers/usb/storage/Kconfig @@ -146,18 +146,6 @@ config USB_STORAGE_KARMA on the resulting scsi device node returns the Karma to normal operation. -config USB_STORAGE_SIERRA - bool "Sierra Wireless TRU-Install Feature Support" - depends on USB_STORAGE - help - Say Y here to include additional code to support Sierra Wireless - products with the TRU-Install feature (e.g., AC597E, AC881U). - - This code switches the Sierra Wireless device from being in - Mass Storage mode to Modem mode. It also has the ability to - support host software upgrades should full Linux support be added - to TRU-Install. - config USB_STORAGE_CYPRESS_ATACB bool "SAT emulation on Cypress USB/ATA Bridge with ATACB" depends on USB_STORAGE diff --git a/drivers/usb/storage/Makefile b/drivers/usb/storage/Makefile index bc3415b475c9..7f8beb5366ae 100644 --- a/drivers/usb/storage/Makefile +++ b/drivers/usb/storage/Makefile @@ -21,11 +21,10 @@ usb-storage-obj-$(CONFIG_USB_STORAGE_JUMPSHOT) += jumpshot.o usb-storage-obj-$(CONFIG_USB_STORAGE_ALAUDA) += alauda.o usb-storage-obj-$(CONFIG_USB_STORAGE_ONETOUCH) += onetouch.o usb-storage-obj-$(CONFIG_USB_STORAGE_KARMA) += karma.o -usb-storage-obj-$(CONFIG_USB_STORAGE_SIERRA) += sierra_ms.o usb-storage-obj-$(CONFIG_USB_STORAGE_CYPRESS_ATACB) += cypress_atacb.o usb-storage-objs := scsiglue.o protocol.o transport.o usb.o \ - initializers.o $(usb-storage-obj-y) + initializers.o sierra_ms.o $(usb-storage-obj-y) ifneq ($(CONFIG_USB_LIBUSUAL),) obj-$(CONFIG_USB) += libusual.o diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index ba412e68d474..0d44f7c11b72 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -1576,7 +1576,6 @@ UNUSUAL_DEV( 0x10d6, 0x2200, 0x0100, 0x0100, US_SC_DEVICE, US_PR_DEVICE, NULL, 0), -#ifdef CONFIG_USB_STORAGE_SIERRA /* Reported by Kevin Lloyd * Entry is needed for the initializer function override, * which instructs the device to load as a modem @@ -1587,7 +1586,6 @@ UNUSUAL_DEV( 0x1199, 0x0fff, 0x0000, 0x9999, "USB MMC Storage", US_SC_DEVICE, US_PR_DEVICE, sierra_ms_init, 0), -#endif /* Reported by Jaco Kroon * The usb-storage module found on the Digitech GNX4 (and supposedly other diff --git a/drivers/usb/storage/usb.c b/drivers/usb/storage/usb.c index 73679aa506de..27016fd2cad1 100644 --- a/drivers/usb/storage/usb.c +++ b/drivers/usb/storage/usb.c @@ -102,9 +102,7 @@ #ifdef CONFIG_USB_STORAGE_CYPRESS_ATACB #include "cypress_atacb.h" #endif -#ifdef CONFIG_USB_STORAGE_SIERRA #include "sierra_ms.h" -#endif /* Some informational data */ MODULE_AUTHOR("Matthew Dharm "); -- cgit v1.2.3 From 73b2c2057579314c4fea1a37e35a501fbb8b9916 Mon Sep 17 00:00:00 2001 From: Kevin Lloyd Date: Mon, 25 Aug 2008 19:20:40 -0700 Subject: USB Serial: Sierra: Device addition & version rev This patch adds devices to the sierra driver and rev's the driver version. Signed-off-by: Kevin Lloyd Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/sierra.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c index 706033753adb..396f099ba9f8 100644 --- a/drivers/usb/serial/sierra.c +++ b/drivers/usb/serial/sierra.c @@ -14,7 +14,7 @@ Whom based his on the Keyspan driver by Hugh Blemings */ -#define DRIVER_VERSION "v.1.2.13a" +#define DRIVER_VERSION "v.1.3.2" #define DRIVER_AUTHOR "Kevin Lloyd " #define DRIVER_DESC "USB Driver for Sierra Wireless USB modems" @@ -30,9 +30,6 @@ #define SWIMS_USB_REQUEST_SetPower 0x00 #define SWIMS_USB_REQUEST_SetNmea 0x07 -#define SWIMS_USB_REQUEST_SetMode 0x0B -#define SWIMS_USB_REQUEST_GetSwocInfo 0x0A -#define SWIMS_SET_MODE_Modem 0x0001 /* per port private data */ #define N_IN_URB 4 @@ -175,6 +172,8 @@ static struct usb_device_id id_table [] = { /* Sierra Wireless Device */ { USB_DEVICE_AND_INTERFACE_INFO(0x1199, 0x0025, 0xFF, 0xFF, 0xFF) }, { USB_DEVICE(0x1199, 0x0026) }, /* Sierra Wireless Device */ + { USB_DEVICE(0x1199, 0x0027) }, /* Sierra Wireless Device */ + { USB_DEVICE(0x1199, 0x0028) }, /* Sierra Wireless Device */ { USB_DEVICE(0x1199, 0x6802) }, /* Sierra Wireless MC8755 */ { USB_DEVICE(0x1199, 0x6804) }, /* Sierra Wireless MC8755 */ @@ -204,6 +203,8 @@ static struct usb_device_id id_table [] = { /* Sierra Wireless Device */ { USB_DEVICE_AND_INTERFACE_INFO(0x1199, 0x6890, 0xFF, 0xFF, 0xFF)}, /* Sierra Wireless Device */ + { USB_DEVICE_AND_INTERFACE_INFO(0x1199, 0x6891, 0xFF, 0xFF, 0xFF)}, + /* Sierra Wireless Device */ { USB_DEVICE_AND_INTERFACE_INFO(0x1199, 0x6892, 0xFF, 0xFF, 0xFF)}, { USB_DEVICE(0x1199, 0x0112) }, /* Sierra Wireless AirCard 580 */ -- cgit v1.2.3 From 0bcfeb3ec9467a8dfae3e906925ec28fe788afcf Mon Sep 17 00:00:00 2001 From: David Brownell Date: Tue, 26 Aug 2008 14:43:46 -0700 Subject: USB: ehci: fix some ehci hangs and crashes I noticed that the "Refactor "if (handshake()) state = HC_STATE_HALT" patch from earlier this year perpetuated a potential problem: it can mark the controller as halted when it's still running (but not acting as, perhaps wrongly, expected). That caused some hangs and crashes, rather than more polite failure modes of a truly halted controller. This patch forces a true halt, and emits a (previously missing) diagnostic. Signed-off-by: David Brownell Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/ehci-hcd.c | 26 ++++++++++++++++---------- 1 file changed, 16 insertions(+), 10 deletions(-) diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c index d9d53f289caf..8409e0705d63 100644 --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c @@ -145,16 +145,6 @@ static int handshake (struct ehci_hcd *ehci, void __iomem *ptr, return -ETIMEDOUT; } -static int handshake_on_error_set_halt(struct ehci_hcd *ehci, void __iomem *ptr, - u32 mask, u32 done, int usec) -{ - int error = handshake(ehci, ptr, mask, done, usec); - if (error) - ehci_to_hcd(ehci)->state = HC_STATE_HALT; - - return error; -} - /* force HC to halt state from unknown (EHCI spec section 2.3) */ static int ehci_halt (struct ehci_hcd *ehci) { @@ -173,6 +163,22 @@ static int ehci_halt (struct ehci_hcd *ehci) STS_HALT, STS_HALT, 16 * 125); } +static int handshake_on_error_set_halt(struct ehci_hcd *ehci, void __iomem *ptr, + u32 mask, u32 done, int usec) +{ + int error; + + error = handshake(ehci, ptr, mask, done, usec); + if (error) { + ehci_halt(ehci); + ehci_to_hcd(ehci)->state = HC_STATE_HALT; + ehci_err(ehci, "force halt; handhake %p %08x %08x -> %d\n", + ptr, mask, done, error); + } + + return error; +} + /* put TDI/ARC silicon into EHCI mode */ static void tdi_reset (struct ehci_hcd *ehci) { -- cgit v1.2.3 From 0a4d7f45ac173862796eb81942afc843d6244798 Mon Sep 17 00:00:00 2001 From: Richard Nauber Date: Tue, 26 Aug 2008 23:34:11 +0200 Subject: USB: Fix the Nokia 6300 storage-mode. This patch fixes that behavior: ... Aug 26 22:39:23 rnauber sd 2:0:0:0: [sda] Sense Key : 0x0 [current] Aug 26 22:39:23 rnauber sd 2:0:0:0: [sda] ASC=0x0 ASCQ=0x0 Aug 26 22:39:23 rnauber sd 2:0:0:0: [sda] Sense Key : 0x0 [current] Aug 26 22:39:23 rnauber sd 2:0:0:0: [sda] ASC=0x0 ASCQ=0x0 Aug 26 22:39:23 rnauber sd 2:0:0:0: [sda] Sense Key : 0x0 [current] Aug 26 22:39:23 rnauber sd 2:0:0:0: [sda] ASC=0x0 ASCQ=0x0 Aug 26 22:39:23 rnauber sd 2:0:0:0: [sda] Sense Key : 0x0 [current] ... cat /proc/bus/usb/devices ... T: Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 3 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=0421 ProdID=04fa Rev= 6.01 S: Manufacturer=Nokia S: Product=Nokia 6300 S: SerialNumber=35XXXXXXXX C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms ... From: Richard Nauber Signed-off-by: Greg Kroah-Hartman --- drivers/usb/storage/unusual_devs.h | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index 0d44f7c11b72..37f45c6c8f7c 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -232,6 +232,13 @@ UNUSUAL_DEV( 0x0421, 0x04b9, 0x0551, 0x0551, US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_FIX_CAPACITY ), +/* Reported by Richard Nauber */ +UNUSUAL_DEV( 0x0421, 0x04fa, 0x0601, 0x0601, + "Nokia", + "6300", + US_SC_DEVICE, US_PR_DEVICE, NULL, + US_FL_FIX_CAPACITY ), + /* Reported by Olaf Hering from novell bug #105878 */ UNUSUAL_DEV( 0x0424, 0x0fdc, 0x0210, 0x0210, "SMSC", -- cgit v1.2.3 From f8834f1febb8f56cdcfeb35485e0cc7a8d547818 Mon Sep 17 00:00:00 2001 From: Tony Murray Date: Fri, 22 Aug 2008 17:30:44 -0500 Subject: USB: Correct Sierra Wireless USB EVDO Modem Device ID I was trying to figure out why my device wasn't supported by the drivers/usb/serial/sierra.c driver, while looking throught the device IDs I spotted what I believe to be a typo in the device IDs. Please apply the following patch If you look down further, there is another HP wireless broadband card, which has a vendor ID of 03f0, like my device. Below is my "lsusb -v -d 03f0:1b1d". Bus 001 Device 005: ID 03f0:1b1d Hewlett-Packard Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x03f0 Hewlett-Packard idProduct 0x1b1d bcdDevice 0.01 iManufacturer 1 HP iProduct 2 HP ev2200 1xEV-DO Broadband Wireless Module iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 67 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 7 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 255 Vendor Specific Subclass bInterfaceProtocol 255 Vendor Specific Protocol iInterface 3 Data Interface Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0010 1x 16 bytes bInterval 128 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x84 EP 4 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x04 EP 4 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x85 EP 5 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x05 EP 5 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Device Status: 0x0000 (Bus Powered) From: Tony Murray Cc: Kevin Lloyd Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/sierra.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c index 396f099ba9f8..eb87640f362a 100644 --- a/drivers/usb/serial/sierra.c +++ b/drivers/usb/serial/sierra.c @@ -160,7 +160,7 @@ static struct usb_device_id id_table [] = { { USB_DEVICE(0x1199, 0x0017) }, /* Sierra Wireless EM5625 */ { USB_DEVICE(0x1199, 0x0018) }, /* Sierra Wireless MC5720 */ { USB_DEVICE(0x1199, 0x0218) }, /* Sierra Wireless MC5720 */ - { USB_DEVICE(0x0f30, 0x1b1d) }, /* Sierra Wireless MC5720 */ + { USB_DEVICE(0x03f0, 0x1b1d) }, /* HP ev2200 a.k.a MC5720 */ { USB_DEVICE(0x1199, 0x0020) }, /* Sierra Wireless MC5725 */ { USB_DEVICE(0x1199, 0x0024) }, /* Sierra Wireless MC5727 */ { USB_DEVICE(0x1199, 0x0220) }, /* Sierra Wireless MC5725 */ -- cgit v1.2.3 From 83a798207361cc26385187b2e71efa2b5d75de7f Mon Sep 17 00:00:00 2001 From: Geoff Levand Date: Fri, 22 Aug 2008 14:13:00 -0700 Subject: USB: fix hcd interrupt disabling Commit de85422b94ddb23c021126815ea49414047c13dc, 'USB: fix interrupt disabling for HCDs with shared interrupt handlers' changed usb_add_hcd() to strip IRQF_DISABLED from irqflags prior to calling request_irq() with the justification that such a removal was necessary for shared interrupts to work properly. Unfortunately, the change in that commit unconditionally removes the IRQF_DISABLED flag, causing problems on platforms that don't use a shared interrupt but require IRQF_DISABLED. This change adds a check for IRQF_SHARED prior to removing the IRQF_DISABLED flag. Fixes the PS3 system startup hang reported with recent Fedora and OpenSUSE kernels. Note that this problem is hidden when CONFIG_LOCKDEP=y (ps3_defconfig), as local_irq_enable_in_hardirq() is defined as a null statement for that config. CC: stable Signed-off-by: Geoff Levand Cc: Alan Stern Cc: Stefan Becker Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/hcd.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c index 8abd4e59bf4a..8ab389dca2b9 100644 --- a/drivers/usb/core/hcd.c +++ b/drivers/usb/core/hcd.c @@ -1876,7 +1876,8 @@ int usb_add_hcd(struct usb_hcd *hcd, * with IRQF_SHARED. As usb_hcd_irq() will always disable * interrupts we can remove it here. */ - irqflags &= ~IRQF_DISABLED; + if (irqflags & IRQF_SHARED) + irqflags &= ~IRQF_DISABLED; snprintf(hcd->irq_descr, sizeof(hcd->irq_descr), "%s:usb%d", hcd->driver->description, hcd->self.busnum); -- cgit v1.2.3 From 697e04db5678fadf96d437806b676403ebee806d Mon Sep 17 00:00:00 2001 From: Oliver Neukum Date: Tue, 2 Sep 2008 10:52:08 +0200 Subject: USB: update of Documentation/usb/anchors.txt The extended anchor API is documented Signed-off-by: Oliver Neukum Signed-off-by: Greg Kroah-Hartman --- Documentation/usb/anchors.txt | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/Documentation/usb/anchors.txt b/Documentation/usb/anchors.txt index 7304bcf5a306..5e6b64c20d25 100644 --- a/Documentation/usb/anchors.txt +++ b/Documentation/usb/anchors.txt @@ -42,9 +42,21 @@ This function kills all URBs associated with an anchor. The URBs are called in the reverse temporal order they were submitted. This way no data can be reordered. +usb_unlink_anchored_urbs() +-------------------------- + +This function unlinks all URBs associated with an anchor. The URBs +are processed in the reverse temporal order they were submitted. +This is similar to usb_kill_anchored_urbs(), but it will not sleep. +Therefore no guarantee is made that the URBs have been unlinked when +the call returns. They may be unlinked later but will be unlinked in +finite time. + usb_wait_anchor_empty_timeout() ------------------------------- This function waits for all URBs associated with an anchor to finish or a timeout, whichever comes first. Its return value will tell you whether the timeout was reached. + + -- cgit v1.2.3 From c3e3208e4b0cf4ed69cbcaa5e059e5cf64437c9a Mon Sep 17 00:00:00 2001 From: David Brownell Date: Sun, 31 Aug 2008 18:04:27 -0700 Subject: usb gadget: fix omap_udc DMA regression This resolves another regression caused by the "use omap_read/write instead of __REG" patch: the hardware address used for DMA to/from the UDC became wrong. Bug noted by Russell King. Reported-by: Russell King Signed-off-by: David Brownell Acked-by: Russell King Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/omap_udc.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/usb/gadget/omap_udc.c b/drivers/usb/gadget/omap_udc.c index 574c53831a05..bb54cca4c543 100644 --- a/drivers/usb/gadget/omap_udc.c +++ b/drivers/usb/gadget/omap_udc.c @@ -787,7 +787,7 @@ static void dma_channel_claim(struct omap_ep *ep, unsigned channel) omap_set_dma_dest_params(ep->lch, OMAP_DMA_PORT_TIPB, OMAP_DMA_AMODE_CONSTANT, - (unsigned long) io_v2p(UDC_DATA_DMA), + UDC_DATA_DMA, 0, 0); } } else { @@ -804,7 +804,7 @@ static void dma_channel_claim(struct omap_ep *ep, unsigned channel) omap_set_dma_src_params(ep->lch, OMAP_DMA_PORT_TIPB, OMAP_DMA_AMODE_CONSTANT, - (unsigned long) io_v2p(UDC_DATA_DMA), + UDC_DATA_DMA, 0, 0); /* EMIFF or SDRC */ omap_set_dma_dest_burst_mode(ep->lch, -- cgit v1.2.3 From 49cd2480baeb377f91e66ba682f81cac2a1feaa1 Mon Sep 17 00:00:00 2001 From: Filip Joelsson Date: Sun, 31 Aug 2008 08:22:16 +0200 Subject: USB: Fixing Nokia 3310c in storage mode I had trouble connecting my cell phone as a storage device - so I added it to the unusual_devs.h list. I had trouble with the bcdDeviceMin and Max values - so after some experimenting I made it pretty inclusive. From: Filip Joelsson Signed-off-by: Greg Kroah-Hartman --- drivers/usb/storage/unusual_devs.h | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index 37f45c6c8f7c..b311300cf788 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -160,6 +160,13 @@ UNUSUAL_DEV( 0x0421, 0x0019, 0x0592, 0x0592, US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_MAX_SECTORS_64 ), +/* Reported by Filip Joelsson */ +UNUSUAL_DEV( 0x0421, 0x005d, 0x0001, 0x0600, + "Nokia", + "Nokia 3110c", + US_SC_DEVICE, US_PR_DEVICE, NULL, + US_FL_FIX_CAPACITY ), + /* Reported by Mario Rettig */ UNUSUAL_DEV( 0x0421, 0x042e, 0x0100, 0x0100, "Nokia", -- cgit v1.2.3 From 0590d5875e3a5dc6586fb16354037f115628896d Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Sat, 30 Aug 2008 19:42:02 +0300 Subject: usb: musb: fix include path headers were moved, fixing. Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman --- drivers/usb/musb/musb_core.c | 4 ++-- drivers/usb/musb/omap2430.c | 4 ++-- drivers/usb/musb/omap2430.h | 4 ++-- 3 files changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c index c5b8f0296fcf..128e949db47c 100644 --- a/drivers/usb/musb/musb_core.c +++ b/drivers/usb/musb/musb_core.c @@ -100,8 +100,8 @@ #include #ifdef CONFIG_ARM -#include -#include +#include +#include #include #endif diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c index 298b22e6ad0d..9d2dcb121c5e 100644 --- a/drivers/usb/musb/omap2430.c +++ b/drivers/usb/musb/omap2430.c @@ -35,8 +35,8 @@ #include #include -#include -#include +#include +#include #include "musb_core.h" #include "omap2430.h" diff --git a/drivers/usb/musb/omap2430.h b/drivers/usb/musb/omap2430.h index 786a62071f72..dc7670718cd2 100644 --- a/drivers/usb/musb/omap2430.h +++ b/drivers/usb/musb/omap2430.h @@ -11,8 +11,8 @@ #define __MUSB_OMAP243X_H__ #if defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3430) -#include -#include +#include +#include /* * OMAP2430-specific definitions -- cgit v1.2.3 From 01c17142659c02d8cd4c67acdd8358180c5c4fb6 Mon Sep 17 00:00:00 2001 From: David Brownell Date: Tue, 26 Aug 2008 23:35:04 -0700 Subject: USB: fix EHCI periodic transfers As noted by Stefan Neis , we had a recent regression with EHCI periodic transfers, in some (seemingly not all that common) cases. The root cause was that the schedule activation was only loosely coupled to the addition or removal of transfers, so two different execution contexts could both think they had to deactivate (or conversely activate) the schedule. So this fix tightens that coupling, managing it more like a refcount. Signed-off-by: David Brownell Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/ehci-sched.c | 32 ++++++++++++++------------------ 1 file changed, 14 insertions(+), 18 deletions(-) diff --git a/drivers/usb/host/ehci-sched.c b/drivers/usb/host/ehci-sched.c index b7853c8bac0f..4a0c5a78b2ed 100644 --- a/drivers/usb/host/ehci-sched.c +++ b/drivers/usb/host/ehci-sched.c @@ -437,6 +437,9 @@ static int enable_periodic (struct ehci_hcd *ehci) u32 cmd; int status; + if (ehci->periodic_sched++) + return 0; + /* did clearing PSE did take effect yet? * takes effect only at frame boundaries... */ @@ -461,6 +464,9 @@ static int disable_periodic (struct ehci_hcd *ehci) u32 cmd; int status; + if (--ehci->periodic_sched) + return 0; + /* did setting PSE not take effect yet? * takes effect only at frame boundaries... */ @@ -544,13 +550,10 @@ static int qh_link_periodic (struct ehci_hcd *ehci, struct ehci_qh *qh) : (qh->usecs * 8); /* maybe enable periodic schedule processing */ - if (!ehci->periodic_sched++) - return enable_periodic (ehci); - - return 0; + return enable_periodic(ehci); } -static void qh_unlink_periodic (struct ehci_hcd *ehci, struct ehci_qh *qh) +static int qh_unlink_periodic(struct ehci_hcd *ehci, struct ehci_qh *qh) { unsigned i; unsigned period; @@ -586,9 +589,7 @@ static void qh_unlink_periodic (struct ehci_hcd *ehci, struct ehci_qh *qh) qh_put (qh); /* maybe turn off periodic schedule */ - ehci->periodic_sched--; - if (!ehci->periodic_sched) - (void) disable_periodic (ehci); + return disable_periodic(ehci); } static void intr_deschedule (struct ehci_hcd *ehci, struct ehci_qh *qh) @@ -1562,9 +1563,7 @@ itd_link_urb ( urb->hcpriv = NULL; timer_action (ehci, TIMER_IO_WATCHDOG); - if (unlikely (!ehci->periodic_sched++)) - return enable_periodic (ehci); - return 0; + return enable_periodic(ehci); } #define ISO_ERRS (EHCI_ISOC_BUF_ERR | EHCI_ISOC_BABBLE | EHCI_ISOC_XACTERR) @@ -1642,7 +1641,7 @@ itd_complete ( ehci_urb_done(ehci, urb, 0); retval = true; urb = NULL; - ehci->periodic_sched--; + (void) disable_periodic(ehci); ehci_to_hcd(ehci)->self.bandwidth_isoc_reqs--; if (unlikely (list_empty (&stream->td_list))) { @@ -1951,9 +1950,7 @@ sitd_link_urb ( urb->hcpriv = NULL; timer_action (ehci, TIMER_IO_WATCHDOG); - if (!ehci->periodic_sched++) - return enable_periodic (ehci); - return 0; + return enable_periodic(ehci); } /*-------------------------------------------------------------------------*/ @@ -2019,7 +2016,7 @@ sitd_complete ( ehci_urb_done(ehci, urb, 0); retval = true; urb = NULL; - ehci->periodic_sched--; + (void) disable_periodic(ehci); ehci_to_hcd(ehci)->self.bandwidth_isoc_reqs--; if (list_empty (&stream->td_list)) { @@ -2243,8 +2240,7 @@ restart: if (unlikely (modified)) { if (likely(ehci->periodic_sched > 0)) goto restart; - /* maybe we can short-circuit this scan! */ - disable_periodic(ehci); + /* short-circuit this scan */ now_uframe = clock; break; } -- cgit v1.2.3 From ce816cf9c917435cd2e3b68acc7cfe2c1f4a814f Mon Sep 17 00:00:00 2001 From: Andreas Bombe Date: Sun, 14 Sep 2008 01:58:55 +0200 Subject: usb-serial: Add Siemens EF81 to PL-2303 hack triggers This hardware needs the pl2303 hack in order to work properly :( Signed-off-by: Andreas Bombe Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/usb-serial.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c index b157c48e8b78..4f7f9e3ae0a4 100644 --- a/drivers/usb/serial/usb-serial.c +++ b/drivers/usb/serial/usb-serial.c @@ -733,7 +733,9 @@ int usb_serial_probe(struct usb_interface *interface, ((le16_to_cpu(dev->descriptor.idVendor) == ATEN_VENDOR_ID) && (le16_to_cpu(dev->descriptor.idProduct) == ATEN_PRODUCT_ID)) || ((le16_to_cpu(dev->descriptor.idVendor) == ALCOR_VENDOR_ID) && - (le16_to_cpu(dev->descriptor.idProduct) == ALCOR_PRODUCT_ID))) { + (le16_to_cpu(dev->descriptor.idProduct) == ALCOR_PRODUCT_ID)) || + ((le16_to_cpu(dev->descriptor.idVendor) == SIEMENS_VENDOR_ID) && + (le16_to_cpu(dev->descriptor.idProduct) == SIEMENS_PRODUCT_ID_EF81))) { if (interface != dev->actconfig->interface[0]) { /* check out the endpoints of the other interface*/ iface_desc = dev->actconfig->interface[0]->cur_altsetting; -- cgit v1.2.3 From ba0f332c413796925ce322d311d75269689a9e5d Mon Sep 17 00:00:00 2001 From: Craig Shelley Date: Thu, 4 Sep 2008 21:28:21 +0100 Subject: USB: SERIAL CP2101 add device IDs Signed-off-by: Craig Shelley Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/cp2101.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/usb/serial/cp2101.c b/drivers/usb/serial/cp2101.c index 442cba69cce5..1279553381e3 100644 --- a/drivers/usb/serial/cp2101.c +++ b/drivers/usb/serial/cp2101.c @@ -72,6 +72,7 @@ static struct usb_device_id id_table [] = { { USB_DEVICE(0x10C4, 0x80CA) }, /* Degree Controls Inc */ { USB_DEVICE(0x10C4, 0x80DD) }, /* Tracient RFID */ { USB_DEVICE(0x10C4, 0x80F6) }, /* Suunto sports instrument */ + { USB_DEVICE(0x10C4, 0x8115) }, /* Arygon NFC/Mifare Reader */ { USB_DEVICE(0x10C4, 0x813D) }, /* Burnside Telecom Deskmobile */ { USB_DEVICE(0x10C4, 0x814A) }, /* West Mountain Radio RIGblaster P&P */ { USB_DEVICE(0x10C4, 0x814B) }, /* West Mountain Radio RIGtalk */ @@ -83,6 +84,7 @@ static struct usb_device_id id_table [] = { { USB_DEVICE(0x10C4, 0x81E7) }, /* Aerocomm Radio */ { USB_DEVICE(0x10C4, 0x8218) }, /* Lipowsky Industrie Elektronik GmbH, HARP-1 */ { USB_DEVICE(0x10c4, 0x8293) }, /* Telegesys ETRX2USB */ + { USB_DEVICE(0x10C4, 0x8341) }, /* Siemens MC35PU GPRS Modem */ { USB_DEVICE(0x10C4, 0xEA60) }, /* Silicon Labs factory default */ { USB_DEVICE(0x10C4, 0xEA61) }, /* Silicon Labs factory default */ { USB_DEVICE(0x10C4, 0xF001) }, /* Elan Digital Systems USBscope50 */ @@ -93,6 +95,7 @@ static struct usb_device_id id_table [] = { { USB_DEVICE(0x13AD, 0x9999) }, /* Baltech card reader */ { USB_DEVICE(0x166A, 0x0303) }, /* Clipsal 5500PCU C-Bus USB interface */ { USB_DEVICE(0x16D6, 0x0001) }, /* Jablotron serial interface */ + { USB_DEVICE(0x18EF, 0xE00F) }, /* ELV USB-I2C-Interface */ { } /* Terminating Entry */ }; -- cgit v1.2.3 From fe1926a0f549741ed0ca778aa1c7d3e208895dee Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Thu, 4 Sep 2008 09:56:35 -0400 Subject: USB: unusual_devs addition for RockChip MP3 player This patch (as1136) adds an unusual_devs entry for a version of the RockChip MP3 player which can't handle the MODE SENSE command used for write-protect detection. Signed-off-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/storage/unusual_devs.h | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index b311300cf788..4d9ca02ac677 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -1001,6 +1001,13 @@ UNUSUAL_DEV( 0x069b, 0x3004, 0x0001, 0x0001, US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_FIX_CAPACITY ), +/* Reported by Adrian Pilchowiec */ +UNUSUAL_DEV( 0x071b, 0x3203, 0x0000, 0x0000, + "RockChip", + "MP3", + US_SC_DEVICE, US_PR_DEVICE, NULL, + US_FL_NO_WP_DETECT | US_FL_MAX_SECTORS_64), + /* Reported by Massimiliano Ghilardi * This USB MP3/AVI player device fails and disconnects if more than 128 * sectors (64kB) are read/written in a single command, and may be present -- cgit v1.2.3 From 6ef65a7fb609a7aca72730dfb9890f30fcd723bf Mon Sep 17 00:00:00 2001 From: Peter Korsgaard Date: Mon, 8 Sep 2008 10:08:59 +0200 Subject: USB: fsl_usb2_udc: fix VDBG() format string Fixes: drivers/usb/gadget/fsl_usb2_udc.c: In function 'dr_controller_setup': drivers/usb/gadget/fsl_usb2_udc.c:229: warning: format '%p' expects type 'void *', but argument 3 has type 'int' Signed-off-by: Peter Korsgaard Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/fsl_usb2_udc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/gadget/fsl_usb2_udc.c b/drivers/usb/gadget/fsl_usb2_udc.c index 1cfccf102a2d..45ad556169f1 100644 --- a/drivers/usb/gadget/fsl_usb2_udc.c +++ b/drivers/usb/gadget/fsl_usb2_udc.c @@ -223,7 +223,7 @@ static int dr_controller_setup(struct fsl_udc *udc) fsl_writel(tmp, &dr_regs->endpointlistaddr); VDBG("vir[qh_base] is %p phy[qh_base] is 0x%8x reg is 0x%8x", - (int)udc->ep_qh, (int)tmp, + udc->ep_qh, (int)tmp, fsl_readl(&dr_regs->endpointlistaddr)); /* Config PHY interface */ -- cgit v1.2.3 From 2bcbe4c199ec012169f938d2c6b543f50c4925ed Mon Sep 17 00:00:00 2001 From: Chris Adams Date: Wed, 10 Sep 2008 14:11:38 -0700 Subject: usb serial: ti_usb_3410_5052 obviously broken by firmware changes While making some other changes to ti_usb_3410_5052, I noticed that the changes made to move the firmware loading to a separate function are broken (in ti_download_firmware(), status is set to -ENOMEM and never changed). This means the driver will never initialize the device properly. It looks like status was supposed to get the result of ti_do_download(). Signed-off-by: Chris Adams Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/ti_usb_3410_5052.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c index e39c779e4160..9a3e495c769c 100644 --- a/drivers/usb/serial/ti_usb_3410_5052.c +++ b/drivers/usb/serial/ti_usb_3410_5052.c @@ -1744,7 +1744,7 @@ static int ti_download_firmware(struct ti_device *tdev, int type) if (buffer) { memcpy(buffer, fw_p->data, fw_p->size); memset(buffer + fw_p->size, 0xff, buffer_size - fw_p->size); - ti_do_download(dev, pipe, buffer, fw_p->size); + status = ti_do_download(dev, pipe, buffer, fw_p->size); kfree(buffer); } release_firmware(fw_p); -- cgit v1.2.3 From a18f80b4e2fdbc7b88d412c3deb533b9f1f30c30 Mon Sep 17 00:00:00 2001 From: Jaroslav Kysela Date: Tue, 16 Sep 2008 15:46:50 +0200 Subject: USB: ftdi_sio: Add 0x5050/0x0900 USB IDs (Papouch Quido USB 4/4) USB: ftdi_sio: Add 0x5050/0x0900 USB IDs (Papouch Quido USB 4/4) Signed-off-by: Jaroslav Kysela Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/ftdi_sio.c | 1 + drivers/usb/serial/ftdi_sio.h | 1 + 2 files changed, 2 insertions(+) diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 984f6eff4c47..8ff8d0a1bae3 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -654,6 +654,7 @@ static struct usb_device_id id_table_combined [] = { .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, { USB_DEVICE(RATOC_VENDOR_ID, RATOC_PRODUCT_ID_USB60F) }, { USB_DEVICE(FTDI_VID, FTDI_REU_TINY_PID) }, + { USB_DEVICE(PAPOUCH_VID, PAPOUCH_QUIDO4x4_PID) }, { }, /* Optional parameter entry */ { } /* Terminating entry */ }; diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h index 382265bba969..ad41287ac2c7 100644 --- a/drivers/usb/serial/ftdi_sio.h +++ b/drivers/usb/serial/ftdi_sio.h @@ -750,6 +750,7 @@ #define PAPOUCH_VID 0x5050 /* Vendor ID */ #define PAPOUCH_TMU_PID 0x0400 /* TMU USB Thermometer */ +#define PAPOUCH_QUIDO4x4_PID 0x0900 /* Quido 4/4 Module */ /* * ACG Identification Technologies GmbH products (http://www.acg.de/). -- cgit v1.2.3 From 884579d03a3e1e9ac8b7f32a1c36387cac3eb80b Mon Sep 17 00:00:00 2001 From: Otavio Salvador Date: Wed, 17 Sep 2008 14:40:46 -0300 Subject: USB: serial: add ZTE CDMA Tech id to option driver Signed-off-by: Otavio Salvador Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/option.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 9f9cd36455f4..73f8277f88f2 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -218,6 +218,7 @@ static int option_send_setup(struct tty_struct *tty, struct usb_serial_port *po /* ZTE PRODUCTS */ #define ZTE_VENDOR_ID 0x19d2 #define ZTE_PRODUCT_MF628 0x0015 +#define ZTE_PRODUCT_CDMA_TECH 0xfffe static struct usb_device_id option_ids[] = { { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COLT) }, @@ -347,6 +348,7 @@ static struct usb_device_id option_ids[] = { { USB_DEVICE(MAXON_VENDOR_ID, 0x6280) }, /* BP3-USB & BP3-EXT HSDPA */ { USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_UC864E) }, { USB_DEVICE(ZTE_VENDOR_ID, ZTE_PRODUCT_MF628) }, + { USB_DEVICE(ZTE_VENDOR_ID, ZTE_PRODUCT_CDMA_TECH) }, { } /* Terminating entry */ }; MODULE_DEVICE_TABLE(usb, option_ids); -- cgit v1.2.3 From b77a5c7040643e658622148bb7d7dad63e8d0158 Mon Sep 17 00:00:00 2001 From: Kevin Lloyd Date: Wed, 17 Sep 2008 09:03:38 -0700 Subject: USB Serial: Sierra: Add MC8785 VID/PID Add another MC8785 VID/PID Signed-off-by: Kevin Lloyd Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/sierra.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c index eb87640f362a..ea1a103c99be 100644 --- a/drivers/usb/serial/sierra.c +++ b/drivers/usb/serial/sierra.c @@ -186,6 +186,7 @@ static struct usb_device_id id_table [] = { { USB_DEVICE(0x1199, 0x6821) }, /* Sierra Wireless AirCard 875U */ { USB_DEVICE(0x1199, 0x6832) }, /* Sierra Wireless MC8780 */ { USB_DEVICE(0x1199, 0x6833) }, /* Sierra Wireless MC8781 */ + { USB_DEVICE(0x1199, 0x683A) }, /* Sierra Wireless MC8785 */ { USB_DEVICE(0x1199, 0x683B) }, /* Sierra Wireless MC8785 Composite */ { USB_DEVICE(0x1199, 0x683C) }, /* Sierra Wireless MC8790 */ { USB_DEVICE(0x1199, 0x683D) }, /* Sierra Wireless MC8790 */ -- cgit v1.2.3 From 09fa14aa9273ca5cf5459b2057eb79e83e81e6be Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Mon, 22 Sep 2008 15:00:08 -0700 Subject: USB: drivers/usb/musb/: disable it on SuperH In file included from drivers/usb/musb/musb_core.h:59, from drivers/usb/musb/musb_core.c:108: drivers/usb/musb/musb_io.h:42: error: conflicting types for '__raw_readsl' /usr/src/devel/arch/sh/include/asm/io.h:112: error: previous declaration of '__raw_readsl' was here drivers/usb/musb/musb_io.h:42: error: conflicting types for '__raw_readsl' /usr/src/devel/arch/sh/include/asm/io.h:112: error: previous declaration of '__raw_readsl' was here drivers/usb/musb/musb_io.h:44: error: conflicting types for 'readsw' /usr/src/devel/arch/sh/include/asm/io.h:164: error: previous definition of 'readsw' was here drivers/usb/musb/musb_io.h:46: error: conflicting types for 'readsb' /usr/src/devel/arch/sh/include/asm/io.h:163: error: previous definition of 'readsb' was here drivers/usb/musb/musb_io.h:49: error: conflicting types for '__raw_writesl' /usr/src/devel/arch/sh/include/asm/io.h:111: error: previous declaration of '__raw_writesl' was here drivers/usb/musb/musb_io.h:49: error: conflicting types for '__raw_writesl' /usr/src/devel/arch/sh/include/asm/io.h:111: error: previous declaration of '__raw_writesl' was here drivers/usb/musb/musb_io.h:51: error: conflicting types for 'writesw' /usr/src/devel/arch/sh/include/asm/io.h:164: error: previous definition of 'writesw' was here drivers/usb/musb/musb_io.h:53: error: conflicting types for 'writesb' /usr/src/devel/arch/sh/include/asm/io.h:163: error: previous definition of 'writesb' was here Cc: Karsten Keil Cc: Paul Mundt Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman --- drivers/usb/musb/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/usb/musb/Kconfig b/drivers/usb/musb/Kconfig index a0017486ad4e..58b2b8fc9439 100644 --- a/drivers/usb/musb/Kconfig +++ b/drivers/usb/musb/Kconfig @@ -9,6 +9,7 @@ comment "Enable Host or Gadget support to see Inventra options" # (M)HDRC = (Multipoint) Highspeed Dual-Role Controller config USB_MUSB_HDRC depends on (USB || USB_GADGET) && HAVE_CLK + depends on !SUPERH select TWL4030_USB if MACH_OMAP_3430SDP tristate 'Inventra Highspeed Dual Role Controller (TI, ...)' help -- cgit v1.2.3 From 96285cb885b445b03b22849f2536af23c7454a11 Mon Sep 17 00:00:00 2001 From: Gaetan Carlier Date: Mon, 22 Sep 2008 15:00:09 -0700 Subject: usb: ftdi_sio: add support for Domintell devices Support for Domintell devices (FTDI FT232BM based) : DGQG and DUSB01 module. PIDs were missing. Signed-off-by: Gaetan Carlier Cc: Greg Kroah-Hartman Cc: Ian Abbott Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/ftdi_sio.c | 2 ++ drivers/usb/serial/ftdi_sio.h | 4 ++++ 2 files changed, 6 insertions(+) diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 8ff8d0a1bae3..3dc93b542b30 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -655,6 +655,8 @@ static struct usb_device_id id_table_combined [] = { { USB_DEVICE(RATOC_VENDOR_ID, RATOC_PRODUCT_ID_USB60F) }, { USB_DEVICE(FTDI_VID, FTDI_REU_TINY_PID) }, { USB_DEVICE(PAPOUCH_VID, PAPOUCH_QUIDO4x4_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_DOMINTELL_DGQG_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_DOMINTELL_DUSB_PID) }, { }, /* Optional parameter entry */ { } /* Terminating entry */ }; diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h index ad41287ac2c7..8a5b6df3a976 100644 --- a/drivers/usb/serial/ftdi_sio.h +++ b/drivers/usb/serial/ftdi_sio.h @@ -839,6 +839,10 @@ /* Rig Expert Ukraine devices */ #define FTDI_REU_TINY_PID 0xED22 /* RigExpert Tiny */ +/* Domintell products http://www.domintell.com */ +#define FTDI_DOMINTELL_DGQG_PID 0xEF50 /* Master */ +#define FTDI_DOMINTELL_DUSB_PID 0xEF51 /* DUSB01 module */ + /* Commands */ #define FTDI_SIO_RESET 0 /* Reset the port */ #define FTDI_SIO_MODEM_CTRL 1 /* Set the modem control register */ -- cgit v1.2.3 From af747c460b663a4b7795dc3f6897b5506fde6888 Mon Sep 17 00:00:00 2001 From: David Almaroad Date: Mon, 22 Sep 2008 15:00:11 -0700 Subject: usb: unusual devs patch for Nokia 5310 Music Xpress The Nokia 5310 Music Xpress phone reports one too many sectors in usb-storage mode. This patch resolves that. Signed-off-by: David Almaroad Cc: Matthew Dharm Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman --- drivers/usb/storage/unusual_devs.h | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index 4d9ca02ac677..cd155475cb6e 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -246,6 +246,13 @@ UNUSUAL_DEV( 0x0421, 0x04fa, 0x0601, 0x0601, US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_FIX_CAPACITY ), +/* Patch for Nokia 5310 capacity */ +UNUSUAL_DEV( 0x0421, 0x006a, 0x0000, 0x0591, + "Nokia", + "5310", + US_SC_DEVICE, US_PR_DEVICE, NULL, + US_FL_FIX_CAPACITY ), + /* Reported by Olaf Hering from novell bug #105878 */ UNUSUAL_DEV( 0x0424, 0x0fdc, 0x0210, 0x0210, "SMSC", -- cgit v1.2.3 From 5257d97a219e17abf8188f136e1189da3b3af33c Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Mon, 22 Sep 2008 14:43:08 -0400 Subject: USB: revert recovery from transient errors This patch (as1135) essentially reverts the major parts of two earlier patches to usbcore, because they ended up causing a regression. Trying to recover from transient communication errors can lead to other problems, because operations that failed during the error period are not always retried. The simplest example is the initial Set-Config request sent after device enumeration; if it gets lost then it will not be retried and the device will remain unconfigured. This patch restores the old behavior in which any port disconnect or port disable causes the entire device structure to be removed, fixing a reported regression. Signed-off-by: Alan Stern Tested-by: Frans Pop Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/hub.c | 39 +++++++++++++++++---------------------- 1 file changed, 17 insertions(+), 22 deletions(-) diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 6a5cb018383d..d99963873e37 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -2683,35 +2683,17 @@ static void hub_port_connect_change(struct usb_hub *hub, int port1, USB_PORT_STAT_C_ENABLE); #endif - /* Try to use the debounce delay for protection against - * port-enable changes caused, for example, by EMI. - */ - if (portchange & (USB_PORT_STAT_C_CONNECTION | - USB_PORT_STAT_C_ENABLE)) { - status = hub_port_debounce(hub, port1); - if (status < 0) { - if (printk_ratelimit()) - dev_err (hub_dev, "connect-debounce failed, " - "port %d disabled\n", port1); - portstatus &= ~USB_PORT_STAT_CONNECTION; - } else { - portstatus = status; - } - } - /* Try to resuscitate an existing device */ udev = hdev->children[port1-1]; if ((portstatus & USB_PORT_STAT_CONNECTION) && udev && udev->state != USB_STATE_NOTATTACHED) { - usb_lock_device(udev); if (portstatus & USB_PORT_STAT_ENABLE) { status = 0; /* Nothing to do */ - } else if (!udev->persist_enabled) { - status = -ENODEV; /* Mustn't resuscitate */ #ifdef CONFIG_USB_SUSPEND - } else if (udev->state == USB_STATE_SUSPENDED) { + } else if (udev->state == USB_STATE_SUSPENDED && + udev->persist_enabled) { /* For a suspended device, treat this as a * remote wakeup event. */ @@ -2726,7 +2708,7 @@ static void hub_port_connect_change(struct usb_hub *hub, int port1, #endif } else { - status = usb_reset_device(udev); + status = -ENODEV; /* Don't resuscitate */ } usb_unlock_device(udev); @@ -2741,6 +2723,19 @@ static void hub_port_connect_change(struct usb_hub *hub, int port1, usb_disconnect(&hdev->children[port1-1]); clear_bit(port1, hub->change_bits); + if (portchange & (USB_PORT_STAT_C_CONNECTION | + USB_PORT_STAT_C_ENABLE)) { + status = hub_port_debounce(hub, port1); + if (status < 0) { + if (printk_ratelimit()) + dev_err(hub_dev, "connect-debounce failed, " + "port %d disabled\n", port1); + portstatus &= ~USB_PORT_STAT_CONNECTION; + } else { + portstatus = status; + } + } + /* Return now if debouncing failed or nothing is connected */ if (!(portstatus & USB_PORT_STAT_CONNECTION)) { @@ -2748,7 +2743,7 @@ static void hub_port_connect_change(struct usb_hub *hub, int port1, if ((wHubCharacteristics & HUB_CHAR_LPSM) < 2 && !(portstatus & (1 << USB_PORT_FEAT_POWER))) set_port_feature(hdev, port1, USB_PORT_FEAT_POWER); - + if (portstatus & USB_PORT_STAT_ENABLE) goto done; return; -- cgit v1.2.3 From 44ce17192a01218b242e032237e1d2e52ef50429 Mon Sep 17 00:00:00 2001 From: Bruno Randolf Date: Tue, 23 Sep 2008 19:48:36 +0200 Subject: [MIPS] au1000: Fix gpio direction When setting the direction of one GPIO pin we have to keep the state of the other pins, hence use binary OR. Also gpio_direction_output() wants to set an initial value, so add that too. This fixes a problem with the USB power switch on mtx-1 boards. Signed-off-by: Bruno Randolf Signed-off-by: Ralf Baechle --- arch/mips/au1000/common/gpio.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/arch/mips/au1000/common/gpio.c b/arch/mips/au1000/common/gpio.c index b485d94ce8a5..1f058434b726 100644 --- a/arch/mips/au1000/common/gpio.c +++ b/arch/mips/au1000/common/gpio.c @@ -61,7 +61,8 @@ static int au1xxx_gpio2_direction_input(unsigned gpio) static int au1xxx_gpio2_direction_output(unsigned gpio, int value) { gpio -= AU1XXX_GPIO_BASE; - gpio2->dir = (0x01 << gpio) | (value << gpio); + gpio2->dir |= 0x01 << gpio; + gpio2->output = (GPIO2_OUTPUT_ENABLE_MASK << gpio) | (value << gpio); return 0; } @@ -90,6 +91,7 @@ static int au1xxx_gpio1_direction_input(unsigned gpio) static int au1xxx_gpio1_direction_output(unsigned gpio, int value) { gpio1->trioutclr = (0x01 & gpio); + au1xxx_gpio1_write(gpio, value); return 0; } -- cgit v1.2.3 From 5291925a9a65ea334f6e887d0f01dd119b8e2b2e Mon Sep 17 00:00:00 2001 From: Jack Tan Date: Tue, 23 Sep 2008 22:52:34 +0800 Subject: [MIPS] Fixe the definition of PTRS_PER_PGD MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit When we use > 4KB's page size the original definition is not consistent with PGDIR_SIZE. For exeample, if we use 16KB page size the PGDIR_SHIFT is (14-2) + 14 = 26, PGDIR_SIZE is 2^26，so the PTRS_PER_PGD should be: 2^32/2^26 = 2^6 but the original definition of PTRS_PER_PGD is 4096 (PGDIR_ORDER = 0). So, this definition needs to be consistent with the PGDIR_SIZE. And the new definition is consistent with the PGD init in pagetable_init(). Signed-off-by: Dajie Tan Signed-off-by: Ralf Baechle --- include/asm-mips/pgtable-32.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/asm-mips/pgtable-32.h b/include/asm-mips/pgtable-32.h index 4396e9ffd418..55813d6150c7 100644 --- a/include/asm-mips/pgtable-32.h +++ b/include/asm-mips/pgtable-32.h @@ -57,7 +57,7 @@ extern int add_temporary_entry(unsigned long entrylo0, unsigned long entrylo1, #define PMD_ORDER 1 #define PTE_ORDER 0 -#define PTRS_PER_PGD ((PAGE_SIZE << PGD_ORDER) / sizeof(pgd_t)) +#define PTRS_PER_PGD (USER_PTRS_PER_PGD * 2) #define PTRS_PER_PTE ((PAGE_SIZE << PTE_ORDER) / sizeof(pte_t)) #define USER_PTRS_PER_PGD (0x80000000UL/PGDIR_SIZE) -- cgit v1.2.3 From 1eda81495a49a4ee91d8863b0a441a624375efea Mon Sep 17 00:00:00 2001 From: Marc Dionne Date: Tue, 23 Sep 2008 22:40:02 -0400 Subject: x86: prevent stale state of c1e_mask across CPU offline/online, fix Fix build error introduced by commit 4faac97d44ac27 ("x86: prevent stale state of c1e_mask across CPU offline/online"). process_32.c needs to include idle.h to get the prototype for c1e_remove_cpu() Signed-off-by: Marc Dionne Signed-off-by: Ingo Molnar --- arch/x86/kernel/process_32.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/x86/kernel/process_32.c b/arch/x86/kernel/process_32.c index 4b3cfdf54216..31f40b24bf5d 100644 --- a/arch/x86/kernel/process_32.c +++ b/arch/x86/kernel/process_32.c @@ -55,6 +55,7 @@ #include #include #include +#include asmlinkage void ret_from_fork(void) __asm__("ret_from_fork"); -- cgit v1.2.3 From 77a9a768b7374cd23d1f400097eede9f1547f508 Mon Sep 17 00:00:00 2001 From: Jeremy Katz Date: Tue, 23 Sep 2008 21:54:00 -0400 Subject: x86: disable apm on the olpc The OLPC doesn't support APM but also doesn't have DMI, so we can't detect and disable it based on DMI data. So, just disable based on machine_is_olpc() Signed-off-by: Jeremy Katz Signed-off-by: Ingo Molnar --- arch/x86/kernel/apm_32.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/x86/kernel/apm_32.c b/arch/x86/kernel/apm_32.c index 9ee24e6bc4b0..732d1f4e10ee 100644 --- a/arch/x86/kernel/apm_32.c +++ b/arch/x86/kernel/apm_32.c @@ -234,6 +234,7 @@ #include #include #include +#include #include #include @@ -2217,7 +2218,7 @@ static int __init apm_init(void) dmi_check_system(apm_dmi_table); - if (apm_info.bios.version == 0 || paravirt_enabled()) { + if (apm_info.bios.version == 0 || paravirt_enabled() || machine_is_olpc()) { printk(KERN_INFO "apm: BIOS not found.\n"); return -ENODEV; } -- cgit v1.2.3 From 4ebb52d34fac2904e541ccfa8e32126db836fa92 Mon Sep 17 00:00:00 2001 From: Uwe Kleine-Koenig Date: Wed, 24 Sep 2008 13:39:21 +0200 Subject: i2c-powermac: Fix section for probe and remove functions __devexit for i2c_powermac_probe is obviously wrong. In the definition of struct platform_driver i2c_powermac_driver the remove function i2c_powermac_remove is wrapped in __devexit_p, so it should be defined using __devexit. Signed-off-by: Uwe Kleine-Koenig Cc: Benjamin Herrenschmidt Cc: Paul Mackerras Signed-off-by: Jean Delvare --- drivers/i2c/busses/i2c-powermac.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/i2c/busses/i2c-powermac.c b/drivers/i2c/busses/i2c-powermac.c index 22f6d5c00d80..0e7b1c6724aa 100644 --- a/drivers/i2c/busses/i2c-powermac.c +++ b/drivers/i2c/busses/i2c-powermac.c @@ -180,7 +180,7 @@ static const struct i2c_algorithm i2c_powermac_algorithm = { }; -static int i2c_powermac_remove(struct platform_device *dev) +static int __devexit i2c_powermac_remove(struct platform_device *dev) { struct i2c_adapter *adapter = platform_get_drvdata(dev); struct pmac_i2c_bus *bus = i2c_get_adapdata(adapter); @@ -200,7 +200,7 @@ static int i2c_powermac_remove(struct platform_device *dev) } -static int __devexit i2c_powermac_probe(struct platform_device *dev) +static int __devinit i2c_powermac_probe(struct platform_device *dev) { struct pmac_i2c_bus *bus = dev->dev.platform_data; struct device_node *parent = NULL; -- cgit v1.2.3 From e74783ec3cb981211689bd2cfd3248f8dc48ec01 Mon Sep 17 00:00:00 2001 From: Sven Wegener Date: Wed, 24 Sep 2008 13:39:21 +0200 Subject: i2c-dev: Return correct error code on class_create() failure We need to convert the error pointer from class_create(), else we'll return the successful return code from register_chrdev() on failure. Signed-off-by: Sven Wegener Signed-off-by: Jean Delvare --- drivers/i2c/i2c-dev.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/i2c/i2c-dev.c b/drivers/i2c/i2c-dev.c index af4491fa7e34..307d976c9b69 100644 --- a/drivers/i2c/i2c-dev.c +++ b/drivers/i2c/i2c-dev.c @@ -583,8 +583,10 @@ static int __init i2c_dev_init(void) goto out; i2c_dev_class = class_create(THIS_MODULE, "i2c-dev"); - if (IS_ERR(i2c_dev_class)) + if (IS_ERR(i2c_dev_class)) { + res = PTR_ERR(i2c_dev_class); goto out_unreg_chrdev; + } res = i2c_add_driver(&i2cdev_driver); if (res) -- cgit v1.2.3 From 17a172fe112a15dc9cd694d84983c51e1dc6bf34 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Wed, 24 Sep 2008 13:39:22 +0200 Subject: i2c: Fix mailing lists in two MAINTAINERS entries Two MAINTAINER entries (I2C/SMBUS STUB DRIVER and SIS 96X I2C/SMBUS DRIVER) were improperly pointing to the lm-sensors mailing list instead of the i2c mailing list. Fix them. Signed-off-by: Jean Delvare Cc: Mark M. Hoffman --- MAINTAINERS | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index 42ebbfdc350b..3596d1782264 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1984,7 +1984,7 @@ S: Maintained I2C/SMBUS STUB DRIVER P: Mark M. Hoffman M: mhoffman@lightlink.com -L: lm-sensors@lm-sensors.org +L: i2c@lm-sensors.org S: Maintained I2C SUBSYSTEM @@ -3726,7 +3726,7 @@ S: Maintained SIS 96X I2C/SMBUS DRIVER P: Mark M. Hoffman M: mhoffman@lightlink.com -L: lm-sensors@lm-sensors.org +L: i2c@lm-sensors.org S: Maintained SIS FRAMEBUFFER DRIVER -- cgit v1.2.3 From 92cccc2cda9a744326bbd9f16c635187af7f8a09 Mon Sep 17 00:00:00 2001 From: "Luis R. Rodriguez" Date: Tue, 23 Sep 2008 14:28:16 -0700 Subject: ath9k: disable MIB interrupts to fix interrupt storm Enabling the MIB interrupts has proven to cause an interrupt storm after 7 hours of run. We will make use of the MIB interrupt once we have ANI supported added so for now to cure this we disable the interrupt. The interrupt storm can be seen as follows after 7 hours of run as reported by Steven Noonan : 18:28:38 sum 1106.00 18:28:39 sum 1037.62 18:28:40 sum 1069.00 18:28:41 sum 1167.00 18:28:42 sum 1155.00 18:28:43 sum 1339.00 18:28:44 sum 18355.00 18:28:45 sum 17845.45 18:28:46 sum 15285.00 18:28:47 sum 17511.00 18:28:48 sum 17568.69 18:28:49 sum 17704.04 18:28:50 sum 18566.67 18:28:51 sum 18913.13 at 18:28:44 the MIB interrupt kicked off and caused huge latency which can be seen even on a video he submitted: http://www.youtube.com/watch?v=4GeCx1gZMpA Signed-off-by: Luis R. Rodriguez Signed-off-by: John W. Linville --- drivers/net/wireless/ath9k/core.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/net/wireless/ath9k/core.c b/drivers/net/wireless/ath9k/core.c index c04959357bda..87e37bc39145 100644 --- a/drivers/net/wireless/ath9k/core.c +++ b/drivers/net/wireless/ath9k/core.c @@ -795,6 +795,12 @@ int ath_open(struct ath_softc *sc, struct ath9k_channel *initial_chan) if (ah->ah_caps.hw_caps & ATH9K_HW_CAP_HT) sc->sc_imask |= ATH9K_INT_CST; + /* Note: We disable MIB interrupts for now as we don't yet + * handle processing ANI, otherwise you will get an interrupt + * storm after about 7 hours of usage making the system unusable + * with huge latency. Once we do have ANI processing included + * we can re-enable this interrupt. */ +#if 0 /* * Enable MIB interrupts when there are hardware phy counters. * Note we only do this (at the moment) for station mode. @@ -802,6 +808,7 @@ int ath_open(struct ath_softc *sc, struct ath9k_channel *initial_chan) if (ath9k_hw_phycounters(ah) && ((sc->sc_opmode == ATH9K_M_STA) || (sc->sc_opmode == ATH9K_M_IBSS))) sc->sc_imask |= ATH9K_INT_MIB; +#endif /* * Some hardware processes the TIM IE and fires an * interrupt when the TIM bit is set. For hardware -- cgit v1.2.3 From 72029fe85d8d060b3f966f2dbc36b3c75b5a6532 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 24 Sep 2008 16:22:23 -0500 Subject: 9p: implement proper trans module refcounting and unregistration 9p trans modules aren't refcounted nor were they unregistered properly. Fix it. * Add 9p_trans_module->owner and reference the module on each trans instance creation and put it on destruction. * Protect v9fs_trans_list with a spinlock. This isn't strictly necessary as the list is manipulated only during module loading / unloading but it's a good idea to make the API safe. * Unregister trans modules when the corresponding module is being unloaded. * While at it, kill unnecessary EXPORT_SYMBOL on p9_trans_fd_init(). Signed-off-by: Tejun Heo Signed-off-by: Eric Van Hensbergen --- include/net/9p/9p.h | 1 + include/net/9p/transport.h | 9 ++++- net/9p/client.c | 10 ++++- net/9p/mod.c | 92 +++++++++++++++++++++++++++++++++------------- net/9p/trans_fd.c | 11 +++++- net/9p/trans_virtio.c | 2 + 6 files changed, 95 insertions(+), 30 deletions(-) diff --git a/include/net/9p/9p.h b/include/net/9p/9p.h index b3d3e27c6299..c3626c0ba9d3 100644 --- a/include/net/9p/9p.h +++ b/include/net/9p/9p.h @@ -596,4 +596,5 @@ int p9_idpool_check(int id, struct p9_idpool *p); int p9_error_init(void); int p9_errstr2errno(char *, int); int p9_trans_fd_init(void); +void p9_trans_fd_exit(void); #endif /* NET_9P_H */ diff --git a/include/net/9p/transport.h b/include/net/9p/transport.h index 0db3a4038dc0..3ca737120a90 100644 --- a/include/net/9p/transport.h +++ b/include/net/9p/transport.h @@ -26,6 +26,8 @@ #ifndef NET_9P_TRANSPORT_H #define NET_9P_TRANSPORT_H +#include + /** * enum p9_trans_status - different states of underlying transports * @Connected: transport is connected and healthy @@ -91,9 +93,12 @@ struct p9_trans_module { int maxsize; /* max message size of transport */ int def; /* this transport should be default */ struct p9_trans * (*create)(const char *, char *, int, unsigned char); + struct module *owner; }; void v9fs_register_trans(struct p9_trans_module *m); -struct p9_trans_module *v9fs_match_trans(const substring_t *name); -struct p9_trans_module *v9fs_default_trans(void); +void v9fs_unregister_trans(struct p9_trans_module *m); +struct p9_trans_module *v9fs_get_trans_by_name(const substring_t *name); +struct p9_trans_module *v9fs_get_default_trans(void); +void v9fs_put_trans(struct p9_trans_module *m); #endif /* NET_9P_TRANSPORT_H */ diff --git a/net/9p/client.c b/net/9p/client.c index 2ffe40cf2f01..10e320307ec0 100644 --- a/net/9p/client.c +++ b/net/9p/client.c @@ -75,7 +75,6 @@ static int parse_opts(char *opts, struct p9_client *clnt) int option; int ret = 0; - clnt->trans_mod = v9fs_default_trans(); clnt->dotu = 1; clnt->msize = 8192; @@ -108,7 +107,7 @@ static int parse_opts(char *opts, struct p9_client *clnt) clnt->msize = option; break; case Opt_trans: - clnt->trans_mod = v9fs_match_trans(&args[0]); + clnt->trans_mod = v9fs_get_trans_by_name(&args[0]); break; case Opt_legacy: clnt->dotu = 0; @@ -117,6 +116,10 @@ static int parse_opts(char *opts, struct p9_client *clnt) continue; } } + + if (!clnt->trans_mod) + clnt->trans_mod = v9fs_get_default_trans(); + kfree(options); return ret; } @@ -150,6 +153,7 @@ struct p9_client *p9_client_create(const char *dev_name, char *options) if (!clnt) return ERR_PTR(-ENOMEM); + clnt->trans_mod = NULL; clnt->trans = NULL; spin_lock_init(&clnt->lock); INIT_LIST_HEAD(&clnt->fidlist); @@ -235,6 +239,8 @@ void p9_client_destroy(struct p9_client *clnt) clnt->trans = NULL; } + v9fs_put_trans(clnt->trans_mod); + list_for_each_entry_safe(fid, fidptr, &clnt->fidlist, flist) p9_fid_destroy(fid); diff --git a/net/9p/mod.c b/net/9p/mod.c index bdee1fb7cc62..1084feb24cb0 100644 --- a/net/9p/mod.c +++ b/net/9p/mod.c @@ -31,6 +31,7 @@ #include #include #include +#include #ifdef CONFIG_NET_9P_DEBUG unsigned int p9_debug_level = 0; /* feature-rific global debug level */ @@ -44,8 +45,8 @@ MODULE_PARM_DESC(debug, "9P debugging level"); * */ +static DEFINE_SPINLOCK(v9fs_trans_lock); static LIST_HEAD(v9fs_trans_list); -static struct p9_trans_module *v9fs_default_transport; /** * v9fs_register_trans - register a new transport with 9p @@ -54,48 +55,87 @@ static struct p9_trans_module *v9fs_default_transport; */ void v9fs_register_trans(struct p9_trans_module *m) { + spin_lock(&v9fs_trans_lock); list_add_tail(&m->list, &v9fs_trans_list); - if (m->def) - v9fs_default_transport = m; + spin_unlock(&v9fs_trans_lock); } EXPORT_SYMBOL(v9fs_register_trans); /** - * v9fs_match_trans - match transport versus registered transports + * v9fs_unregister_trans - unregister a 9p transport + * @m: the transport to remove + * + */ +void v9fs_unregister_trans(struct p9_trans_module *m) +{ + spin_lock(&v9fs_trans_lock); + list_del_init(&m->list); + spin_unlock(&v9fs_trans_lock); +} +EXPORT_SYMBOL(v9fs_unregister_trans); + +/** + * v9fs_get_trans_by_name - get transport with the matching name * @name: string identifying transport * */ -struct p9_trans_module *v9fs_match_trans(const substring_t *name) +struct p9_trans_module *v9fs_get_trans_by_name(const substring_t *name) { - struct list_head *p; - struct p9_trans_module *t = NULL; - - list_for_each(p, &v9fs_trans_list) { - t = list_entry(p, struct p9_trans_module, list); - if (strncmp(t->name, name->from, name->to-name->from) == 0) - return t; - } - return NULL; + struct p9_trans_module *t, *found = NULL; + + spin_lock(&v9fs_trans_lock); + + list_for_each_entry(t, &v9fs_trans_list, list) + if (strncmp(t->name, name->from, name->to-name->from) == 0 && + try_module_get(t->owner)) { + found = t; + break; + } + + spin_unlock(&v9fs_trans_lock); + return found; } -EXPORT_SYMBOL(v9fs_match_trans); +EXPORT_SYMBOL(v9fs_get_trans_by_name); /** - * v9fs_default_trans - returns pointer to default transport + * v9fs_get_default_trans - get the default transport * */ -struct p9_trans_module *v9fs_default_trans(void) +struct p9_trans_module *v9fs_get_default_trans(void) { - if (v9fs_default_transport) - return v9fs_default_transport; - else if (!list_empty(&v9fs_trans_list)) - return list_first_entry(&v9fs_trans_list, - struct p9_trans_module, list); - else - return NULL; + struct p9_trans_module *t, *found = NULL; + + spin_lock(&v9fs_trans_lock); + + list_for_each_entry(t, &v9fs_trans_list, list) + if (t->def && try_module_get(t->owner)) { + found = t; + break; + } + + if (!found) + list_for_each_entry(t, &v9fs_trans_list, list) + if (try_module_get(t->owner)) { + found = t; + break; + } + + spin_unlock(&v9fs_trans_lock); + return found; } -EXPORT_SYMBOL(v9fs_default_trans); +EXPORT_SYMBOL(v9fs_get_default_trans); +/** + * v9fs_put_trans - put trans + * @m: transport to put + * + */ +void v9fs_put_trans(struct p9_trans_module *m) +{ + if (m) + module_put(m->owner); +} /** * v9fs_init - Initialize module @@ -120,6 +160,8 @@ static int __init init_p9(void) static void __exit exit_p9(void) { printk(KERN_INFO "Unloading 9P2000 support\n"); + + p9_trans_fd_exit(); } module_init(init_p9) diff --git a/net/9p/trans_fd.c b/net/9p/trans_fd.c index cdf137af7adc..6a32ffdb9429 100644 --- a/net/9p/trans_fd.c +++ b/net/9p/trans_fd.c @@ -1629,6 +1629,7 @@ static struct p9_trans_module p9_tcp_trans = { .maxsize = MAX_SOCK_BUF, .def = 1, .create = p9_trans_create_tcp, + .owner = THIS_MODULE, }; static struct p9_trans_module p9_unix_trans = { @@ -1636,6 +1637,7 @@ static struct p9_trans_module p9_unix_trans = { .maxsize = MAX_SOCK_BUF, .def = 0, .create = p9_trans_create_unix, + .owner = THIS_MODULE, }; static struct p9_trans_module p9_fd_trans = { @@ -1643,6 +1645,7 @@ static struct p9_trans_module p9_fd_trans = { .maxsize = MAX_SOCK_BUF, .def = 0, .create = p9_trans_create_fd, + .owner = THIS_MODULE, }; int p9_trans_fd_init(void) @@ -1659,4 +1662,10 @@ int p9_trans_fd_init(void) return 0; } -EXPORT_SYMBOL(p9_trans_fd_init); + +void p9_trans_fd_exit(void) +{ + v9fs_unregister_trans(&p9_tcp_trans); + v9fs_unregister_trans(&p9_unix_trans); + v9fs_unregister_trans(&p9_fd_trans); +} diff --git a/net/9p/trans_virtio.c b/net/9p/trans_virtio.c index 42adc052b149..94912e077a55 100644 --- a/net/9p/trans_virtio.c +++ b/net/9p/trans_virtio.c @@ -528,6 +528,7 @@ static struct p9_trans_module p9_virtio_trans = { .create = p9_virtio_create, .maxsize = PAGE_SIZE*16, .def = 0, + .owner = THIS_MODULE, }; /* The standard init function */ @@ -545,6 +546,7 @@ static int __init p9_virtio_init(void) static void __exit p9_virtio_cleanup(void) { unregister_virtio_driver(&p9_virtio_drv); + v9fs_unregister_trans(&p9_virtio_trans); } module_init(p9_virtio_init); -- cgit v1.2.3 From 7dc5d24be06a5ed874af035d52a083a7b61ef1bd Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 24 Sep 2008 16:22:23 -0500 Subject: 9p-trans_fd: fix trans_fd::p9_conn_destroy() p9_conn_destroy() first kills all current requests by calling p9_conn_cancel(), then waits for the request list to be cleared by waiting on p9_conn->equeue. After that, polling is stopped and the trans is destroyed. This sequence has a few problems. * Read and write works were never cancelled and the p9_conn can be destroyed while the works are running as r/w works remove requests from the list and dereference the p9_conn from them. * The list emptiness wait using p9_conn->equeue wouldn't trigger because p9_conn_cancel() always clears all the lists and the only way the wait can be triggered is to have another task to issue a request between the slim window between p9_conn_cancel() and the wait, which isn't safe under the current implementation with or without the wait. This patch fixes the problem by first stopping poll, which can schedule r/w works, first and cancle r/w works which guarantees that r/w works are not and will not run from that point and then calling p9_conn_cancel() and do the rest of destruction. Signed-off-by: Tejun Heo Signed-off-by: Eric Van Hensbergen --- net/9p/trans_fd.c | 24 +++++------------------- 1 file changed, 5 insertions(+), 19 deletions(-) diff --git a/net/9p/trans_fd.c b/net/9p/trans_fd.c index 6a32ffdb9429..ee0d151da31a 100644 --- a/net/9p/trans_fd.c +++ b/net/9p/trans_fd.c @@ -151,7 +151,6 @@ struct p9_mux_poll_task { * @trans: reference to transport instance for this connection * @tagpool: id accounting for transactions * @err: error state - * @equeue: event wait_q (?) * @req_list: accounting for requests which have been sent * @unsent_req_list: accounting for requests that haven't been sent * @rcall: current response &p9_fcall structure @@ -178,7 +177,6 @@ struct p9_conn { struct p9_trans *trans; struct p9_idpool *tagpool; int err; - wait_queue_head_t equeue; struct list_head req_list; struct list_head unsent_req_list; struct p9_fcall *rcall; @@ -430,7 +428,6 @@ static struct p9_conn *p9_conn_create(struct p9_trans *trans) } m->err = 0; - init_waitqueue_head(&m->equeue); INIT_LIST_HEAD(&m->req_list); INIT_LIST_HEAD(&m->unsent_req_list); m->rcall = NULL; @@ -483,18 +480,13 @@ static void p9_conn_destroy(struct p9_conn *m) { P9_DPRINTK(P9_DEBUG_MUX, "mux %p prev %p next %p\n", m, m->mux_list.prev, m->mux_list.next); - p9_conn_cancel(m, -ECONNRESET); - - if (!list_empty(&m->req_list)) { - /* wait until all processes waiting on this session exit */ - P9_DPRINTK(P9_DEBUG_MUX, - "mux %p waiting for empty request queue\n", m); - wait_event_timeout(m->equeue, (list_empty(&m->req_list)), 5000); - P9_DPRINTK(P9_DEBUG_MUX, "mux %p request queue empty: %d\n", m, - list_empty(&m->req_list)); - } p9_mux_poll_stop(m); + cancel_work_sync(&m->rq); + cancel_work_sync(&m->wq); + + p9_conn_cancel(m, -ECONNRESET); + m->trans = NULL; p9_idpool_destroy(m->tagpool); kfree(m); @@ -840,8 +832,6 @@ static void p9_read_work(struct work_struct *work) (*req->cb) (req, req->cba); else kfree(req->rcall); - - wake_up(&m->equeue); } } else { if (err >= 0 && rcall->id != P9_RFLUSH) @@ -984,8 +974,6 @@ static void p9_mux_flush_cb(struct p9_req *freq, void *a) (*req->cb) (req, req->cba); else kfree(req->rcall); - - wake_up(&m->equeue); } kfree(freq->tcall); @@ -1191,8 +1179,6 @@ void p9_conn_cancel(struct p9_conn *m, int err) else kfree(req->rcall); } - - wake_up(&m->equeue); } /** -- cgit v1.2.3 From 571ffeafffbfdd0b8f2f9d3b991028797ec87e42 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 24 Sep 2008 16:22:23 -0500 Subject: 9p-trans_fd: clean up p9_conn_create() * Use kzalloc() to allocate p9_conn and remove 0/NULL initializations. * Clean up error return paths. Signed-off-by: Tejun Heo Signed-off-by: Eric Van Hensbergen --- net/9p/trans_fd.c | 20 ++++---------------- 1 file changed, 4 insertions(+), 16 deletions(-) diff --git a/net/9p/trans_fd.c b/net/9p/trans_fd.c index ee0d151da31a..6c88e8983750 100644 --- a/net/9p/trans_fd.c +++ b/net/9p/trans_fd.c @@ -407,11 +407,11 @@ static void p9_mux_poll_stop(struct p9_conn *m) static struct p9_conn *p9_conn_create(struct p9_trans *trans) { int i, n; - struct p9_conn *m, *mtmp; + struct p9_conn *m; P9_DPRINTK(P9_DEBUG_MUX, "transport %p msize %d\n", trans, trans->msize); - m = kmalloc(sizeof(struct p9_conn), GFP_KERNEL); + m = kzalloc(sizeof(struct p9_conn), GFP_KERNEL); if (!m) return ERR_PTR(-ENOMEM); @@ -422,24 +422,14 @@ static struct p9_conn *p9_conn_create(struct p9_trans *trans) m->trans = trans; m->tagpool = p9_idpool_create(); if (IS_ERR(m->tagpool)) { - mtmp = ERR_PTR(-ENOMEM); kfree(m); - return mtmp; + return ERR_PTR(-ENOMEM); } - m->err = 0; INIT_LIST_HEAD(&m->req_list); INIT_LIST_HEAD(&m->unsent_req_list); - m->rcall = NULL; - m->rpos = 0; - m->rbuf = NULL; - m->wpos = m->wsize = 0; - m->wbuf = NULL; INIT_WORK(&m->rq, p9_read_work); INIT_WORK(&m->wq, p9_write_work); - m->wsched = 0; - memset(&m->poll_waddr, 0, sizeof(m->poll_waddr)); - m->poll_task = NULL; n = p9_mux_poll_start(m); if (n) { kfree(m); @@ -460,10 +450,8 @@ static struct p9_conn *p9_conn_create(struct p9_trans *trans) for (i = 0; i < ARRAY_SIZE(m->poll_waddr); i++) { if (IS_ERR(m->poll_waddr[i])) { p9_mux_poll_stop(m); - mtmp = (void *)m->poll_waddr; /* the error code */ kfree(m); - m = mtmp; - break; + return (void *)m->poll_waddr; /* the error code */ } } -- cgit v1.2.3 From ec3c68f232f6d98b4596c05c1c7551b44c617c5f Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 24 Sep 2008 16:22:23 -0500 Subject: 9p-trans_fd: don't do fs segment mangling in p9_fd_poll() p9_fd_poll() is never called with user pointers and f_op->poll() doesn't expect its arguments to be from userland. There's no need to set kernel ds before calling f_op->poll() from p9_fd_poll(). Remove it. Signed-off-by: Tejun Heo Signed-off-by: Eric Van Hensbergen --- net/9p/trans_fd.c | 14 +++----------- 1 file changed, 3 insertions(+), 11 deletions(-) diff --git a/net/9p/trans_fd.c b/net/9p/trans_fd.c index 6c88e8983750..f6d4af16cb19 100644 --- a/net/9p/trans_fd.c +++ b/net/9p/trans_fd.c @@ -1344,7 +1344,6 @@ p9_fd_poll(struct p9_trans *trans, struct poll_table_struct *pt) { int ret, n; struct p9_trans_fd *ts = NULL; - mm_segment_t oldfs; if (trans && trans->status == Connected) ts = trans->priv; @@ -1358,24 +1357,17 @@ p9_fd_poll(struct p9_trans *trans, struct poll_table_struct *pt) if (!ts->wr->f_op || !ts->wr->f_op->poll) return -EIO; - oldfs = get_fs(); - set_fs(get_ds()); - ret = ts->rd->f_op->poll(ts->rd, pt); if (ret < 0) - goto end; + return ret; if (ts->rd != ts->wr) { n = ts->wr->f_op->poll(ts->wr, pt); - if (n < 0) { - ret = n; - goto end; - } + if (n < 0) + return n; ret = (ret & ~POLLOUT) | (n & ~POLLIN); } -end: - set_fs(oldfs); return ret; } -- cgit v1.2.3 From 206ca50de77033c6cc17d0e14fbb12d119a67b01 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 24 Sep 2008 16:22:23 -0500 Subject: 9p-trans_fd: fix and clean up module init/exit paths trans_fd leaked p9_mux_wq on module unload. Fix it. While at it, collapse p9_mux_global_init() into p9_trans_fd_init(). It's easier to follow this way and the global poll_tasks array is about to removed anyway. Signed-off-by: Tejun Heo Signed-off-by: Eric Van Hensbergen --- net/9p/trans_fd.c | 31 +++++++++++-------------------- 1 file changed, 11 insertions(+), 20 deletions(-) diff --git a/net/9p/trans_fd.c b/net/9p/trans_fd.c index f6d4af16cb19..0b4eb5f78356 100644 --- a/net/9p/trans_fd.c +++ b/net/9p/trans_fd.c @@ -238,22 +238,6 @@ static int p9_conn_rpcnb(struct p9_conn *m, struct p9_fcall *tc, static void p9_conn_cancel(struct p9_conn *m, int err); -static int p9_mux_global_init(void) -{ - int i; - - for (i = 0; i < ARRAY_SIZE(p9_mux_poll_tasks); i++) - p9_mux_poll_tasks[i].task = NULL; - - p9_mux_wq = create_workqueue("v9fs"); - if (!p9_mux_wq) { - printk(KERN_WARNING "v9fs: mux: creating workqueue failed\n"); - return -ENOMEM; - } - - return 0; -} - static u16 p9_mux_get_tag(struct p9_conn *m) { int tag; @@ -1616,10 +1600,15 @@ static struct p9_trans_module p9_fd_trans = { int p9_trans_fd_init(void) { - int ret = p9_mux_global_init(); - if (ret) { - printk(KERN_WARNING "9p: starting mux failed\n"); - return ret; + int i; + + for (i = 0; i < ARRAY_SIZE(p9_mux_poll_tasks); i++) + p9_mux_poll_tasks[i].task = NULL; + + p9_mux_wq = create_workqueue("v9fs"); + if (!p9_mux_wq) { + printk(KERN_WARNING "v9fs: mux: creating workqueue failed\n"); + return -ENOMEM; } v9fs_register_trans(&p9_tcp_trans); @@ -1634,4 +1623,6 @@ void p9_trans_fd_exit(void) v9fs_unregister_trans(&p9_tcp_trans); v9fs_unregister_trans(&p9_unix_trans); v9fs_unregister_trans(&p9_fd_trans); + + destroy_workqueue(p9_mux_wq); } -- cgit v1.2.3 From 620678244bc7b83287e2e283ed4fe6b959e94b7d Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Wed, 24 Sep 2008 16:22:22 -0500 Subject: 9p: introduce missing kfree Error handling code following a kmalloc should free the allocated data. The semantic match that finds the problem is as follows: (http://www.emn.fr/x-info/coccinelle/) // @r exists@ local idexpression x; statement S; expression E; identifier f,l; position p1,p2; expression *ptr != NULL; @@ ( if ((x@p1 = \(kmalloc\|kzalloc\|kcalloc\)(...)) == NULL) S | x@p1 = \(kmalloc\|kzalloc\|kcalloc\)(...); ... if (x == NULL) S ) <... when != x when != if (...) { <+...x...+> } x->f = E ...> ( return \(0\|<+...x...+>\|ptr\); | return@p2 ...; ) @script:python@ p1 << r.p1; p2 << r.p2; @@ print "* file: %s kmalloc %s return %s" % (p1[0].file,p1[0].line,p2[0].line) // Signed-off-by: Julia Lawall Signed-off-by: Eric Van Hensbergen Signed-off-by: Andrew Morton --- net/9p/trans_fd.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/net/9p/trans_fd.c b/net/9p/trans_fd.c index 0b4eb5f78356..d652baf5ff91 100644 --- a/net/9p/trans_fd.c +++ b/net/9p/trans_fd.c @@ -870,8 +870,10 @@ static struct p9_req *p9_send_request(struct p9_conn *m, else n = p9_mux_get_tag(m); - if (n < 0) + if (n < 0) { + kfree(req); return ERR_PTR(-ENOMEM); + } p9_set_tag(tc, n); -- cgit v1.2.3 From 62aa528e0299ffef8e138d9d92d13e631d06c5ff Mon Sep 17 00:00:00 2001 From: Julien Brunel Date: Wed, 24 Sep 2008 16:22:22 -0500 Subject: 9p: use an IS_ERR test rather than a NULL test In case of error, the function p9_client_walk returns an ERR pointer, but never returns a NULL pointer. So a NULL test that comes after an IS_ERR test should be deleted. The semantic match that finds this problem is as follows: (http://www.emn.fr/x-info/coccinelle/) // @match_bad_null_test@ expression x, E; statement S1,S2; @@ x = p9_client_walk(...) ... when != x = E * if (x != NULL) S1 else S2 // Signed-off-by: Julien Brunel Signed-off-by: Julia Lawall Signed-off-by: Eric Van Hensbergen Signed-off-by: Andrew Morton --- fs/9p/vfs_inode.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/fs/9p/vfs_inode.c b/fs/9p/vfs_inode.c index c95295c65045..e83aa5ebe861 100644 --- a/fs/9p/vfs_inode.c +++ b/fs/9p/vfs_inode.c @@ -626,8 +626,7 @@ static struct dentry *v9fs_vfs_lookup(struct inode *dir, struct dentry *dentry, return NULL; error: - if (fid) - p9_client_clunk(fid); + p9_client_clunk(fid); return ERR_PTR(result); } -- cgit v1.2.3 From 16ec4700127d479143c77fd9128dfa17ab572963 Mon Sep 17 00:00:00 2001 From: Eric Van Hensbergen Date: Wed, 24 Sep 2008 16:22:22 -0500 Subject: 9p: fix put_data error handling Abhishek Kulkarni pointed out an inconsistency in the way errors are returned from p9_put_data. On deeper exploration it seems the error handling for this path was completely wrong. This patch adds checks for allocation problems and propagates errors correctly. Signed-off-by: Eric Van Hensbergen --- net/9p/conv.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/net/9p/conv.c b/net/9p/conv.c index 44547201f5bc..5ad3a3bd73b2 100644 --- a/net/9p/conv.c +++ b/net/9p/conv.c @@ -451,8 +451,10 @@ p9_put_data(struct cbuf *bufp, const char *data, int count, unsigned char **pdata) { *pdata = buf_alloc(bufp, count); + if (*pdata == NULL) + return -ENOMEM; memmove(*pdata, data, count); - return count; + return 0; } static int @@ -460,6 +462,8 @@ p9_put_user_data(struct cbuf *bufp, const char __user *data, int count, unsigned char **pdata) { *pdata = buf_alloc(bufp, count); + if (*pdata == NULL) + return -ENOMEM; return copy_from_user(*pdata, data, count); } -- cgit v1.2.3 From 8ca31ce52a5cfd03b960fd81a49197ae85d25347 Mon Sep 17 00:00:00 2001 From: Yasuyuki Kozakai Date: Wed, 24 Sep 2008 15:53:39 -0700 Subject: netfilter: ip6t_{hbh,dst}: Rejects not-strict mode on rule insertion The current code ignores rules for internal options in HBH/DST options header in packet processing if 'Not strict' mode is specified (which is not implemented). Clearly it is not expected by user. Kernel should reject HBH/DST rule insertion with 'Not strict' mode in the first place. Signed-off-by: Yasuyuki Kozakai Signed-off-by: Patrick McHardy Signed-off-by: David S. Miller --- net/ipv6/netfilter/ip6t_hbh.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/net/ipv6/netfilter/ip6t_hbh.c b/net/ipv6/netfilter/ip6t_hbh.c index 62e39ace0588..26654b26d7fa 100644 --- a/net/ipv6/netfilter/ip6t_hbh.c +++ b/net/ipv6/netfilter/ip6t_hbh.c @@ -97,8 +97,6 @@ hbh_mt6(const struct sk_buff *skb, const struct net_device *in, hdrlen -= 2; if (!(optinfo->flags & IP6T_OPTS_OPTS)) { return ret; - } else if (optinfo->flags & IP6T_OPTS_NSTRICT) { - pr_debug("Not strict - not implemented"); } else { pr_debug("Strict "); pr_debug("#%d ", optinfo->optsnr); @@ -177,6 +175,12 @@ hbh_mt6_check(const char *tablename, const void *entry, pr_debug("ip6t_opts: unknown flags %X\n", optsinfo->invflags); return false; } + + if (optsinfo->flags & IP6T_OPTS_NSTRICT) { + pr_debug("ip6t_opts: Not strict - not implemented"); + return false; + } + return true; } -- cgit v1.2.3 From b4f151ff899362fec952c45d166252c9912c041f Mon Sep 17 00:00:00 2001 From: David Howells Date: Wed, 24 Sep 2008 17:48:26 +0100 Subject: MN10300: Move asm-arm/cnt32_to_63.h to include/linux/ Move asm-arm/cnt32_to_63.h to include/linux/ so that MN10300 can make use of it too. Signed-off-by: David Howells Signed-off-by: Linus Torvalds --- arch/arm/mach-pxa/time.c | 2 +- arch/arm/mach-sa1100/generic.c | 2 +- arch/arm/mach-versatile/core.c | 2 +- include/linux/cnt32_to_63.h | 80 ++++++++++++++++++++++++++++++++++++++++++ 4 files changed, 83 insertions(+), 3 deletions(-) create mode 100644 include/linux/cnt32_to_63.h diff --git a/arch/arm/mach-pxa/time.c b/arch/arm/mach-pxa/time.c index 67e18509d7bf..b0d6b32654cf 100644 --- a/arch/arm/mach-pxa/time.c +++ b/arch/arm/mach-pxa/time.c @@ -17,9 +17,9 @@ #include #include #include +#include #include -#include #include #include #include diff --git a/arch/arm/mach-sa1100/generic.c b/arch/arm/mach-sa1100/generic.c index 1362994c78aa..b422526f6d8b 100644 --- a/arch/arm/mach-sa1100/generic.c +++ b/arch/arm/mach-sa1100/generic.c @@ -18,9 +18,9 @@ #include #include /* just for sched_clock() - funny that */ #include +#include #include -#include #include #include #include diff --git a/arch/arm/mach-versatile/core.c b/arch/arm/mach-versatile/core.c index d75e795c893e..b638f10411e8 100644 --- a/arch/arm/mach-versatile/core.c +++ b/arch/arm/mach-versatile/core.c @@ -28,8 +28,8 @@ #include #include #include +#include -#include #include #include #include diff --git a/include/linux/cnt32_to_63.h b/include/linux/cnt32_to_63.h new file mode 100644 index 000000000000..8c0f9505b48c --- /dev/null +++ b/include/linux/cnt32_to_63.h @@ -0,0 +1,80 @@ +/* + * Extend a 32-bit counter to 63 bits + * + * Author: Nicolas Pitre + * Created: December 3, 2006 + * Copyright: MontaVista Software, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 + * as published by the Free Software Foundation. + */ + +#ifndef __LINUX_CNT32_TO_63_H__ +#define __LINUX_CNT32_TO_63_H__ + +#include +#include +#include + +/* this is used only to give gcc a clue about good code generation */ +union cnt32_to_63 { + struct { +#if defined(__LITTLE_ENDIAN) + u32 lo, hi; +#elif defined(__BIG_ENDIAN) + u32 hi, lo; +#endif + }; + u64 val; +}; + + +/** + * cnt32_to_63 - Expand a 32-bit counter to a 63-bit counter + * @cnt_lo: The low part of the counter + * + * Many hardware clock counters are only 32 bits wide and therefore have + * a relatively short period making wrap-arounds rather frequent. This + * is a problem when implementing sched_clock() for example, where a 64-bit + * non-wrapping monotonic value is expected to be returned. + * + * To overcome that limitation, let's extend a 32-bit counter to 63 bits + * in a completely lock free fashion. Bits 0 to 31 of the clock are provided + * by the hardware while bits 32 to 62 are stored in memory. The top bit in + * memory is used to synchronize with the hardware clock half-period. When + * the top bit of both counters (hardware and in memory) differ then the + * memory is updated with a new value, incrementing it when the hardware + * counter wraps around. + * + * Because a word store in memory is atomic then the incremented value will + * always be in synch with the top bit indicating to any potential concurrent + * reader if the value in memory is up to date or not with regards to the + * needed increment. And any race in updating the value in memory is harmless + * as the same value would simply be stored more than once. + * + * The only restriction for the algorithm to work properly is that this + * code must be executed at least once per each half period of the 32-bit + * counter to properly update the state bit in memory. This is usually not a + * problem in practice, but if it is then a kernel timer could be scheduled + * to manage for this code to be executed often enough. + * + * Note that the top bit (bit 63) in the returned value should be considered + * as garbage. It is not cleared here because callers are likely to use a + * multiplier on the returned value which can get rid of the top bit + * implicitly by making the multiplier even, therefore saving on a runtime + * clear-bit instruction. Otherwise caller must remember to clear the top + * bit explicitly. + */ +#define cnt32_to_63(cnt_lo) \ +({ \ + static volatile u32 __m_cnt_hi; \ + union cnt32_to_63 __x; \ + __x.hi = __m_cnt_hi; \ + __x.lo = (cnt_lo); \ + if (unlikely((s32)(__x.hi ^ __x.lo) < 0)) \ + __m_cnt_hi = __x.hi = (__x.hi ^ 0x80000000) + (__x.hi >> 31); \ + __x.val; \ +}) + +#endif -- cgit v1.2.3 From 08ec3c2d45bac41c782acb4e3331ac5881b2c68a Mon Sep 17 00:00:00 2001 From: David Howells Date: Wed, 24 Sep 2008 17:48:31 +0100 Subject: MN10300: Make sched_clock() report time since boot Make sched_clock() report time since boot rather than time since last timer interrupt. Make sched_clock() expand and scale the 32-bit TSC value running at IOCLK speed (~33MHz) to a 64-bit nanosecond counter, using cnt32_to_63() acquired from the ARM arch and without using slow DIVU instructions every call. Signed-off-by: David Howells Signed-off-by: Linus Torvalds --- arch/mn10300/kernel/time.c | 52 ++++++++++++++++++++++++++++++++++++---------- 1 file changed, 41 insertions(+), 11 deletions(-) diff --git a/arch/mn10300/kernel/time.c b/arch/mn10300/kernel/time.c index babb7c2ac377..e4606586f94c 100644 --- a/arch/mn10300/kernel/time.c +++ b/arch/mn10300/kernel/time.c @@ -1,6 +1,6 @@ /* MN10300 Low level time management * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * Copyright (C) 2007-2008 Red Hat, Inc. All Rights Reserved. * Written by David Howells (dhowells@redhat.com) * - Derived from arch/i386/kernel/time.c * @@ -16,6 +16,7 @@ #include #include #include +#include #include #include #include @@ -40,27 +41,54 @@ static struct irqaction timer_irq = { .name = "timer", }; +static unsigned long sched_clock_multiplier; + /* * scheduler clock - returns current time in nanosec units. */ unsigned long long sched_clock(void) { union { - unsigned long long l; - u32 w[2]; - } quot; + unsigned long long ll; + unsigned l[2]; + } tsc64, result; + unsigned long tsc, tmp; + unsigned product[3]; /* 96-bit intermediate value */ + + /* read the TSC value + */ + tsc = 0 - get_cycles(); /* get_cycles() counts down */ - quot.w[0] = mn10300_last_tsc - get_cycles(); - quot.w[1] = 1000000000; + /* expand to 64-bits. + * - sched_clock() must be called once a minute or better or the + * following will go horribly wrong - see cnt32_to_63() + */ + tsc64.ll = cnt32_to_63(tsc) & 0x7fffffffffffffffULL; - asm("mulu %2,%3,%0,%1" - : "=r"(quot.w[1]), "=r"(quot.w[0]) - : "0"(quot.w[1]), "1"(quot.w[0]) + /* scale the 64-bit TSC value to a nanosecond value via a 96-bit + * intermediate + */ + asm("mulu %2,%0,%3,%0 \n" /* LSW * mult -> 0:%3:%0 */ + "mulu %2,%1,%2,%1 \n" /* MSW * mult -> %2:%1:0 */ + "add %3,%1 \n" + "addc 0,%2 \n" /* result in %2:%1:%0 */ + : "=r"(product[0]), "=r"(product[1]), "=r"(product[2]), "=r"(tmp) + : "0"(tsc64.l[0]), "1"(tsc64.l[1]), "2"(sched_clock_multiplier) : "cc"); - do_div(quot.l, MN10300_TSCCLK); + result.l[0] = product[1] << 16 | product[0] >> 16; + result.l[1] = product[2] << 16 | product[1] >> 16; - return quot.l; + return result.ll; +} + +/* + * initialise the scheduler clock + */ +static void __init mn10300_sched_clock_init(void) +{ + sched_clock_multiplier = + __muldiv64u(NSEC_PER_SEC, 1 << 16, MN10300_TSCCLK); } /* @@ -128,4 +156,6 @@ void __init time_init(void) /* start the watchdog timer */ watchdog_go(); #endif + + mn10300_sched_clock_init(); } -- cgit v1.2.3 From 399ccdc1cd4e92e541d4dacbbf18c52bd693418b Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Thu, 25 Sep 2008 14:51:03 +0200 Subject: ALSA: fix locking in snd_pcm_open*() and snd_rawmidi_open*() The PCM and rawmidi open callbacks have a lock against card->controls_list but it takes a wrong one, card->controls_rwsem, instead of a right one card->ctl_files_rwlock. This patch fixes them. This change also fixes automatically the potential deadlocks due to mm->mmap_sem in munmap and copy_from/to_user, reported by Sitsofe Wheeler: A: snd_ctl_elem_user_tlv(): card->controls_rwsem => mm->mmap_sem B: snd_pcm_open(): card->open_mutex => card->controls_rwsem C: munmap: mm->mmap_sem => snd_pcm_release(): card->open_mutex The patch breaks the chain. Signed-off-by: Takashi Iwai --- sound/core/pcm.c | 4 ++-- sound/core/rawmidi.c | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/sound/core/pcm.c b/sound/core/pcm.c index 9dd9bc73fe1d..ece25c718e95 100644 --- a/sound/core/pcm.c +++ b/sound/core/pcm.c @@ -781,7 +781,7 @@ int snd_pcm_attach_substream(struct snd_pcm *pcm, int stream, return -ENODEV; card = pcm->card; - down_read(&card->controls_rwsem); + read_lock(&card->ctl_files_rwlock); list_for_each_entry(kctl, &card->ctl_files, list) { if (kctl->pid == current->pid) { prefer_subdevice = kctl->prefer_pcm_subdevice; @@ -789,7 +789,7 @@ int snd_pcm_attach_substream(struct snd_pcm *pcm, int stream, break; } } - up_read(&card->controls_rwsem); + read_unlock(&card->ctl_files_rwlock); switch (stream) { case SNDRV_PCM_STREAM_PLAYBACK: diff --git a/sound/core/rawmidi.c b/sound/core/rawmidi.c index f7ea7287c59c..b917a9f981c7 100644 --- a/sound/core/rawmidi.c +++ b/sound/core/rawmidi.c @@ -418,7 +418,7 @@ static int snd_rawmidi_open(struct inode *inode, struct file *file) mutex_lock(&rmidi->open_mutex); while (1) { subdevice = -1; - down_read(&card->controls_rwsem); + read_lock(&card->ctl_files_rwlock); list_for_each_entry(kctl, &card->ctl_files, list) { if (kctl->pid == current->pid) { subdevice = kctl->prefer_rawmidi_subdevice; @@ -426,7 +426,7 @@ static int snd_rawmidi_open(struct inode *inode, struct file *file) break; } } - up_read(&card->controls_rwsem); + read_unlock(&card->ctl_files_rwlock); err = snd_rawmidi_kernel_open(rmidi->card, rmidi->device, subdevice, fflags, rawmidi_file); if (err >= 0) -- cgit v1.2.3 From 24e8fc498e9618338854bfbcf8d1d737e0bf1775 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Thu, 25 Sep 2008 17:51:11 +0200 Subject: ALSA: remove unneeded power_mutex lock in snd_pcm_drop The power_mutex lock in snd_pcm_drop may cause a possible deadlock chain, and above all, it's unneeded. Let's get rid of it. Signed-off-by: Takashi Iwai --- sound/core/pcm_native.c | 13 +++---------- 1 file changed, 3 insertions(+), 10 deletions(-) diff --git a/sound/core/pcm_native.c b/sound/core/pcm_native.c index c49b9d9e303c..c487025d3457 100644 --- a/sound/core/pcm_native.c +++ b/sound/core/pcm_native.c @@ -1546,16 +1546,10 @@ static int snd_pcm_drop(struct snd_pcm_substream *substream) card = substream->pcm->card; if (runtime->status->state == SNDRV_PCM_STATE_OPEN || - runtime->status->state == SNDRV_PCM_STATE_DISCONNECTED) + runtime->status->state == SNDRV_PCM_STATE_DISCONNECTED || + runtime->status->state == SNDRV_PCM_STATE_SUSPENDED) return -EBADFD; - snd_power_lock(card); - if (runtime->status->state == SNDRV_PCM_STATE_SUSPENDED) { - result = snd_power_wait(card, SNDRV_CTL_POWER_D0); - if (result < 0) - goto _unlock; - } - snd_pcm_stream_lock_irq(substream); /* resume pause */ if (runtime->status->state == SNDRV_PCM_STATE_PAUSED) @@ -1564,8 +1558,7 @@ static int snd_pcm_drop(struct snd_pcm_substream *substream) snd_pcm_stop(substream, SNDRV_PCM_STATE_SETUP); /* runtime->control->appl_ptr = runtime->status->hw_ptr; */ snd_pcm_stream_unlock_irq(substream); - _unlock: - snd_power_unlock(card); + return result; } -- cgit v1.2.3 From 6ef190cc92e33565accff6a320f0e7d90480bfe7 Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Thu, 25 Sep 2008 15:28:08 -0700 Subject: IPoIB: Fix crash when path record fails after path flush Commit ee1e2c82 ("IPoIB: Refresh paths instead of flushing them on SM change events") changed how paths are flushed on an SM event. This change introduces a problem if the path record query triggered by fails, causing path->ah to become NULL. A later successful path query will then trigger WARN_ON() in path_rec_completion(), and crash because path->ah has already been freed, so the ipoib_put_ah() inside the lock in path_rec_completion() may actually drop the last reference (contrary to the comment that claims this is safe). Fix this by updating path->ah and freeing old_ah only when the path record query is successful. This prevents the neighbour AH and that path AH from getting out of sync. This fixes Reported-by: Rabah Salem Debugged-by: Eli Cohen Signed-off-by: Roland Dreier Signed-off-by: Linus Torvalds --- drivers/infiniband/ulp/ipoib/ipoib_main.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/infiniband/ulp/ipoib/ipoib_main.c b/drivers/infiniband/ulp/ipoib/ipoib_main.c index 1b1df5cc4113..e9ca3cb57d52 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib_main.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_main.c @@ -404,7 +404,7 @@ static void path_rec_completion(int status, struct net_device *dev = path->dev; struct ipoib_dev_priv *priv = netdev_priv(dev); struct ipoib_ah *ah = NULL; - struct ipoib_ah *old_ah; + struct ipoib_ah *old_ah = NULL; struct ipoib_neigh *neigh, *tn; struct sk_buff_head skqueue; struct sk_buff *skb; @@ -428,12 +428,12 @@ static void path_rec_completion(int status, spin_lock_irqsave(&priv->lock, flags); - old_ah = path->ah; - path->ah = ah; - if (ah) { path->pathrec = *pathrec; + old_ah = path->ah; + path->ah = ah; + ipoib_dbg(priv, "created address handle %p for LID 0x%04x, SL %d\n", ah, be16_to_cpu(pathrec->dlid), pathrec->sl); -- cgit v1.2.3 From f1ccd2955157e1aff992f6aaaba0944209076220 Mon Sep 17 00:00:00 2001 From: Lachlan McIlroy Date: Fri, 26 Sep 2008 12:16:46 +1000 Subject: [XFS] Fix extent list corruption in xfs_iext_irec_compact_full(). If we don't move all the records from the next buffer into the current buffer then we need to update the er_extoff field of the next buffer as we shift the remaining records to the start of the buffer. SGI-PV: 987159 SGI-Modid: xfs-linux-melb:xfs-kern:32165a Signed-off-by: Lachlan McIlroy Signed-off-by: Eric Sandeen Signed-off-by: Russell Cattelan --- fs/xfs/xfs_inode.c | 1 + 1 file changed, 1 insertion(+) diff --git a/fs/xfs/xfs_inode.c b/fs/xfs/xfs_inode.c index 00e80df9dd9d..419cfc2eacb3 100644 --- a/fs/xfs/xfs_inode.c +++ b/fs/xfs/xfs_inode.c @@ -4584,6 +4584,7 @@ xfs_iext_irec_compact_full( (XFS_LINEAR_EXTS - erp_next->er_extcount) * sizeof(xfs_bmbt_rec_t)); + erp_next->er_extoff += ext_diff; } } -- cgit v1.2.3 From 71a8c87fb300b601eacf7a86cc6c6322fe827bfd Mon Sep 17 00:00:00 2001 From: Lachlan McIlroy Date: Fri, 26 Sep 2008 12:17:57 +1000 Subject: [XFS] Remove xfs_iext_irec_compact_full() Yet another bug was found in xfs_iext_irec_compact_full() and while the source of the bug was found it wasn't an easy task to track it down because the conditions are very difficult to reproduce. A HUGE thank-you goes to Russell Cattelan and Eric Sandeen for their significant effort in tracking down the source of this corruption. xfs_iext_irec_compact_full() and xfs_iext_irec_compact_pages() are almost identical - they both compact indirect extent lists by moving extents from subsequent buffers into earlier ones. xfs_iext_irec_compact_pages() only moves extents if all of the extents in the next buffer will fit into the empty space in the buffer before it. xfs_iext_irec_compact_full() will go a step further and move part of the next buffer if all the extents wont fit. It will then shift the remaining extents in the next buffer up to the start of the buffer. The bug here was that we did not update er_extoff and this caused extent list corruption. It does not appear that this extra functionality gains us much. Calling xfs_iext_irec_compact_pages() instead will do a good enough job at compacting the indirect list and will be quicker too. For the case in xfs_iext_indirect_to_direct() the total number of extents in the indirect list will fit into one buffer so we will never need the extra functionality of xfs_iext_irec_compact_full() there. Also xfs_iext_irec_compact_pages() doesn't need to do a memmove() (the buffers will never overlap) so we don't want the performance hit that can incur. SGI-PV: 987159 SGI-Modid: xfs-linux-melb:xfs-kern:32166a Signed-off-by: Lachlan McIlroy Signed-off-by: Eric Sandeen --- fs/xfs/xfs_inode.c | 95 ++---------------------------------------------------- 1 file changed, 3 insertions(+), 92 deletions(-) diff --git a/fs/xfs/xfs_inode.c b/fs/xfs/xfs_inode.c index 419cfc2eacb3..dbd9cef852ec 100644 --- a/fs/xfs/xfs_inode.c +++ b/fs/xfs/xfs_inode.c @@ -4118,7 +4118,7 @@ xfs_iext_indirect_to_direct( ASSERT(nextents <= XFS_LINEAR_EXTS); size = nextents * sizeof(xfs_bmbt_rec_t); - xfs_iext_irec_compact_full(ifp); + xfs_iext_irec_compact_pages(ifp); ASSERT(ifp->if_real_bytes == XFS_IEXT_BUFSZ); ep = ifp->if_u1.if_ext_irec->er_extbuf; @@ -4449,8 +4449,7 @@ xfs_iext_irec_remove( * compaction policy is as follows: * * Full Compaction: Extents fit into a single page (or inline buffer) - * Full Compaction: Extents occupy less than 10% of allocated space - * Partial Compaction: Extents occupy > 10% and < 50% of allocated space + * Partial Compaction: Extents occupy less than 50% of allocated space * No Compaction: Extents occupy at least 50% of allocated space */ void @@ -4471,8 +4470,6 @@ xfs_iext_irec_compact( xfs_iext_direct_to_inline(ifp, nextents); } else if (nextents <= XFS_LINEAR_EXTS) { xfs_iext_indirect_to_direct(ifp); - } else if (nextents < (nlists * XFS_LINEAR_EXTS) >> 3) { - xfs_iext_irec_compact_full(ifp); } else if (nextents < (nlists * XFS_LINEAR_EXTS) >> 1) { xfs_iext_irec_compact_pages(ifp); } @@ -4496,7 +4493,7 @@ xfs_iext_irec_compact_pages( erp_next = erp + 1; if (erp_next->er_extcount <= (XFS_LINEAR_EXTS - erp->er_extcount)) { - memmove(&erp->er_extbuf[erp->er_extcount], + memcpy(&erp->er_extbuf[erp->er_extcount], erp_next->er_extbuf, erp_next->er_extcount * sizeof(xfs_bmbt_rec_t)); erp->er_extcount += erp_next->er_extcount; @@ -4515,92 +4512,6 @@ xfs_iext_irec_compact_pages( } } -/* - * Fully compact the extent records managed by the indirection array. - */ -void -xfs_iext_irec_compact_full( - xfs_ifork_t *ifp) /* inode fork pointer */ -{ - xfs_bmbt_rec_host_t *ep, *ep_next; /* extent record pointers */ - xfs_ext_irec_t *erp, *erp_next; /* extent irec pointers */ - int erp_idx = 0; /* extent irec index */ - int ext_avail; /* empty entries in ex list */ - int ext_diff; /* number of exts to add */ - int nlists; /* number of irec's (ex lists) */ - - ASSERT(ifp->if_flags & XFS_IFEXTIREC); - - nlists = ifp->if_real_bytes / XFS_IEXT_BUFSZ; - erp = ifp->if_u1.if_ext_irec; - ep = &erp->er_extbuf[erp->er_extcount]; - erp_next = erp + 1; - ep_next = erp_next->er_extbuf; - - while (erp_idx < nlists - 1) { - /* - * Check how many extent records are available in this irec. - * If there is none skip the whole exercise. - */ - ext_avail = XFS_LINEAR_EXTS - erp->er_extcount; - if (ext_avail) { - - /* - * Copy over as many as possible extent records into - * the previous page. - */ - ext_diff = MIN(ext_avail, erp_next->er_extcount); - memcpy(ep, ep_next, ext_diff * sizeof(xfs_bmbt_rec_t)); - erp->er_extcount += ext_diff; - erp_next->er_extcount -= ext_diff; - - /* - * If the next irec is empty now we can simply - * remove it. - */ - if (erp_next->er_extcount == 0) { - /* - * Free page before removing extent record - * so er_extoffs don't get modified in - * xfs_iext_irec_remove. - */ - kmem_free(erp_next->er_extbuf); - erp_next->er_extbuf = NULL; - xfs_iext_irec_remove(ifp, erp_idx + 1); - erp = &ifp->if_u1.if_ext_irec[erp_idx]; - nlists = ifp->if_real_bytes / XFS_IEXT_BUFSZ; - - /* - * If the next irec is not empty move up the content - * that has not been copied to the previous page to - * the beggining of this one. - */ - } else { - memmove(erp_next->er_extbuf, &ep_next[ext_diff], - erp_next->er_extcount * - sizeof(xfs_bmbt_rec_t)); - ep_next = erp_next->er_extbuf; - memset(&ep_next[erp_next->er_extcount], 0, - (XFS_LINEAR_EXTS - - erp_next->er_extcount) * - sizeof(xfs_bmbt_rec_t)); - erp_next->er_extoff += ext_diff; - } - } - - if (erp->er_extcount == XFS_LINEAR_EXTS) { - erp_idx++; - if (erp_idx < nlists) - erp = &ifp->if_u1.if_ext_irec[erp_idx]; - else - break; - } - ep = &erp->er_extbuf[erp->er_extcount]; - erp_next = erp + 1; - ep_next = erp_next->er_extbuf; - } -} - /* * This is called to update the er_extoff field in the indirection * array when extents have been added or removed from one of the -- cgit v1.2.3 From 18d6522b86d21a04c8ac1ea79747e2e434a956d9 Mon Sep 17 00:00:00 2001 From: Atsuo Igarashi Date: Fri, 26 Sep 2008 10:36:41 -0500 Subject: kgdb: could not write to the last of valid memory with kgdb On the ARM architecture, kgdb will crash the kernel if the last byte of valid memory is written due to a flush_icache_range flushing beyond the memory boundary. Signed-off-by: Atsuo Igarashi Signed-off-by: Jason Wessel --- kernel/kgdb.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/kernel/kgdb.c b/kernel/kgdb.c index eaa21fc9ad1d..949806ab67de 100644 --- a/kernel/kgdb.c +++ b/kernel/kgdb.c @@ -488,7 +488,7 @@ static int write_mem_msg(int binary) if (err) return err; if (CACHE_FLUSH_IS_SAFE) - flush_icache_range(addr, addr + length + 1); + flush_icache_range(addr, addr + length); return 0; } -- cgit v1.2.3 From d7161a65341556bacb5e6654e133803f46f51063 Mon Sep 17 00:00:00 2001 From: Jason Wessel Date: Fri, 26 Sep 2008 10:36:41 -0500 Subject: kgdb, x86, arm, mips, powerpc: ignore user space single stepping On the x86 arch, user space single step exceptions should be ignored if they occur in the kernel space, such as ptrace stepping through a system call. First check if it is kgdb that is executing a single step, then ensure it is not an accidental traversal into the user space, while in kgdb, any other time the TIF_SINGLESTEP is set, kgdb should ignore the exception. On x86, arm, mips and powerpc, the kgdb_contthread usage was inconsistent with the way single stepping is implemented in the kgdb core. The arch specific stub should always set the kgdb_cpu_doing_single_step correctly if it is single stepping. This allows kgdb to correctly process an instruction steps if ptrace happens to be requesting an instruction step over a system call. Signed-off-by: Jason Wessel --- arch/arm/kernel/kgdb.c | 2 -- arch/mips/kernel/kgdb.c | 3 +-- arch/powerpc/kernel/kgdb.c | 5 ++--- arch/x86/kernel/kgdb.c | 18 +++++++++++------- kernel/kgdb.c | 8 ++++---- 5 files changed, 18 insertions(+), 18 deletions(-) diff --git a/arch/arm/kernel/kgdb.c b/arch/arm/kernel/kgdb.c index aaffaecffcd1..ba8ccfede964 100644 --- a/arch/arm/kernel/kgdb.c +++ b/arch/arm/kernel/kgdb.c @@ -111,8 +111,6 @@ int kgdb_arch_handle_exception(int exception_vector, int signo, case 'D': case 'k': case 'c': - kgdb_contthread = NULL; - /* * Try to read optional parameter, pc unchanged if no parm. * If this was a compiled breakpoint, we need to move diff --git a/arch/mips/kernel/kgdb.c b/arch/mips/kernel/kgdb.c index 8f6d58ede33c..6e152c80cd4a 100644 --- a/arch/mips/kernel/kgdb.c +++ b/arch/mips/kernel/kgdb.c @@ -236,8 +236,7 @@ int kgdb_arch_handle_exception(int vector, int signo, int err_code, atomic_set(&kgdb_cpu_doing_single_step, -1); if (remcom_in_buffer[0] == 's') - if (kgdb_contthread) - atomic_set(&kgdb_cpu_doing_single_step, cpu); + atomic_set(&kgdb_cpu_doing_single_step, cpu); return 0; } diff --git a/arch/powerpc/kernel/kgdb.c b/arch/powerpc/kernel/kgdb.c index b4fdf2f2743c..fe8f71dd0b3f 100644 --- a/arch/powerpc/kernel/kgdb.c +++ b/arch/powerpc/kernel/kgdb.c @@ -347,9 +347,8 @@ int kgdb_arch_handle_exception(int vector, int signo, int err_code, linux_regs->msr |= MSR_SE; #endif kgdb_single_step = 1; - if (kgdb_contthread) - atomic_set(&kgdb_cpu_doing_single_step, - raw_smp_processor_id()); + atomic_set(&kgdb_cpu_doing_single_step, + raw_smp_processor_id()); } return 0; } diff --git a/arch/x86/kernel/kgdb.c b/arch/x86/kernel/kgdb.c index f47f0eb886b8..00f7896c9a19 100644 --- a/arch/x86/kernel/kgdb.c +++ b/arch/x86/kernel/kgdb.c @@ -378,10 +378,8 @@ int kgdb_arch_handle_exception(int e_vector, int signo, int err_code, if (remcomInBuffer[0] == 's') { linux_regs->flags |= X86_EFLAGS_TF; kgdb_single_step = 1; - if (kgdb_contthread) { - atomic_set(&kgdb_cpu_doing_single_step, - raw_smp_processor_id()); - } + atomic_set(&kgdb_cpu_doing_single_step, + raw_smp_processor_id()); } get_debugreg(dr6, 6); @@ -466,9 +464,15 @@ static int __kgdb_notify(struct die_args *args, unsigned long cmd) case DIE_DEBUG: if (atomic_read(&kgdb_cpu_doing_single_step) == - raw_smp_processor_id() && - user_mode(regs)) - return single_step_cont(regs, args); + raw_smp_processor_id()) { + if (user_mode(regs)) + return single_step_cont(regs, args); + break; + } else if (test_thread_flag(TIF_SINGLESTEP)) + /* This means a user thread is single stepping + * a system call which should be ignored + */ + return NOTIFY_DONE; /* fall through */ default: if (user_mode(regs)) diff --git a/kernel/kgdb.c b/kernel/kgdb.c index 949806ab67de..25d955dbb989 100644 --- a/kernel/kgdb.c +++ b/kernel/kgdb.c @@ -1462,7 +1462,7 @@ acquirelock: * Get the passive CPU lock which will hold all the non-primary * CPU in a spin state while the debugger is active */ - if (!kgdb_single_step || !kgdb_contthread) { + if (!kgdb_single_step) { for (i = 0; i < NR_CPUS; i++) atomic_set(&passive_cpu_wait[i], 1); } @@ -1475,7 +1475,7 @@ acquirelock: #ifdef CONFIG_SMP /* Signal the other CPUs to enter kgdb_wait() */ - if ((!kgdb_single_step || !kgdb_contthread) && kgdb_do_roundup) + if ((!kgdb_single_step) && kgdb_do_roundup) kgdb_roundup_cpus(flags); #endif @@ -1494,7 +1494,7 @@ acquirelock: kgdb_post_primary_code(ks->linux_regs, ks->ex_vector, ks->err_code); kgdb_deactivate_sw_breakpoints(); kgdb_single_step = 0; - kgdb_contthread = NULL; + kgdb_contthread = current; exception_level = 0; /* Talk to debugger with gdbserial protocol */ @@ -1508,7 +1508,7 @@ acquirelock: kgdb_info[ks->cpu].task = NULL; atomic_set(&cpu_in_kgdb[ks->cpu], 0); - if (!kgdb_single_step || !kgdb_contthread) { + if (!kgdb_single_step) { for (i = NR_CPUS-1; i >= 0; i--) atomic_set(&passive_cpu_wait[i], 0); /* -- cgit v1.2.3 From 95dbf1dbe39ed336a3e72116c95cfa98dd3457e6 Mon Sep 17 00:00:00 2001 From: Jason Wessel Date: Fri, 26 Sep 2008 10:36:42 -0500 Subject: kgdb, x86_64: gdb serial has BX and DX reversed The BX and DX registers in the gdb serial register packet need to be flipped for gdb to receive the correct data. Signed-off-by: Jason Wessel --- include/asm-x86/kgdb.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/include/asm-x86/kgdb.h b/include/asm-x86/kgdb.h index 484c47554f3b..e86b3060bdcb 100644 --- a/include/asm-x86/kgdb.h +++ b/include/asm-x86/kgdb.h @@ -42,9 +42,9 @@ enum regnames { #else /* ! CONFIG_X86_32 */ enum regnames { GDB_AX, /* 0 */ - GDB_DX, /* 1 */ + GDB_BX, /* 1 */ GDB_CX, /* 2 */ - GDB_BX, /* 3 */ + GDB_DX, /* 3 */ GDB_SI, /* 4 */ GDB_DI, /* 5 */ GDB_BP, /* 6 */ -- cgit v1.2.3 From 703a1edcd1534468fc18f733c03bd91a65c8c6f0 Mon Sep 17 00:00:00 2001 From: Jason Wessel Date: Fri, 26 Sep 2008 10:36:42 -0500 Subject: kgdb, x86_64: fix PS CS SS registers in gdb serial On x86_64 the gdb serial register structure defines the PS (also known as eflags), CS and SS registers as 4 bytes entities. This patch splits the x86_64 regnames enum into a 32 and 64 version to account for the 32 bit entities in the gdb serial packets. Also the program counter is properly filled in for the sleeping threads. Signed-off-by: Jason Wessel --- arch/x86/kernel/kgdb.c | 25 +++++++++++++++++++++---- include/asm-x86/kgdb.h | 20 +++++++++----------- 2 files changed, 30 insertions(+), 15 deletions(-) diff --git a/arch/x86/kernel/kgdb.c b/arch/x86/kernel/kgdb.c index 00f7896c9a19..8282a2139681 100644 --- a/arch/x86/kernel/kgdb.c +++ b/arch/x86/kernel/kgdb.c @@ -69,6 +69,9 @@ static int gdb_x86vector = -1; */ void pt_regs_to_gdb_regs(unsigned long *gdb_regs, struct pt_regs *regs) { +#ifndef CONFIG_X86_32 + u32 *gdb_regs32 = (u32 *)gdb_regs; +#endif gdb_regs[GDB_AX] = regs->ax; gdb_regs[GDB_BX] = regs->bx; gdb_regs[GDB_CX] = regs->cx; @@ -76,9 +79,9 @@ void pt_regs_to_gdb_regs(unsigned long *gdb_regs, struct pt_regs *regs) gdb_regs[GDB_SI] = regs->si; gdb_regs[GDB_DI] = regs->di; gdb_regs[GDB_BP] = regs->bp; - gdb_regs[GDB_PS] = regs->flags; gdb_regs[GDB_PC] = regs->ip; #ifdef CONFIG_X86_32 + gdb_regs[GDB_PS] = regs->flags; gdb_regs[GDB_DS] = regs->ds; gdb_regs[GDB_ES] = regs->es; gdb_regs[GDB_CS] = regs->cs; @@ -94,6 +97,9 @@ void pt_regs_to_gdb_regs(unsigned long *gdb_regs, struct pt_regs *regs) gdb_regs[GDB_R13] = regs->r13; gdb_regs[GDB_R14] = regs->r14; gdb_regs[GDB_R15] = regs->r15; + gdb_regs32[GDB_PS] = regs->flags; + gdb_regs32[GDB_CS] = regs->cs; + gdb_regs32[GDB_SS] = regs->ss; #endif gdb_regs[GDB_SP] = regs->sp; } @@ -112,6 +118,9 @@ void pt_regs_to_gdb_regs(unsigned long *gdb_regs, struct pt_regs *regs) */ void sleeping_thread_to_gdb_regs(unsigned long *gdb_regs, struct task_struct *p) { +#ifndef CONFIG_X86_32 + u32 *gdb_regs32 = (u32 *)gdb_regs; +#endif gdb_regs[GDB_AX] = 0; gdb_regs[GDB_BX] = 0; gdb_regs[GDB_CX] = 0; @@ -129,8 +138,10 @@ void sleeping_thread_to_gdb_regs(unsigned long *gdb_regs, struct task_struct *p) gdb_regs[GDB_FS] = 0xFFFF; gdb_regs[GDB_GS] = 0xFFFF; #else - gdb_regs[GDB_PS] = *(unsigned long *)(p->thread.sp + 8); - gdb_regs[GDB_PC] = 0; + gdb_regs32[GDB_PS] = *(unsigned long *)(p->thread.sp + 8); + gdb_regs32[GDB_CS] = __KERNEL_CS; + gdb_regs32[GDB_SS] = __KERNEL_DS; + gdb_regs[GDB_PC] = p->thread.ip; gdb_regs[GDB_R8] = 0; gdb_regs[GDB_R9] = 0; gdb_regs[GDB_R10] = 0; @@ -153,6 +164,9 @@ void sleeping_thread_to_gdb_regs(unsigned long *gdb_regs, struct task_struct *p) */ void gdb_regs_to_pt_regs(unsigned long *gdb_regs, struct pt_regs *regs) { +#ifndef CONFIG_X86_32 + u32 *gdb_regs32 = (u32 *)gdb_regs; +#endif regs->ax = gdb_regs[GDB_AX]; regs->bx = gdb_regs[GDB_BX]; regs->cx = gdb_regs[GDB_CX]; @@ -160,9 +174,9 @@ void gdb_regs_to_pt_regs(unsigned long *gdb_regs, struct pt_regs *regs) regs->si = gdb_regs[GDB_SI]; regs->di = gdb_regs[GDB_DI]; regs->bp = gdb_regs[GDB_BP]; - regs->flags = gdb_regs[GDB_PS]; regs->ip = gdb_regs[GDB_PC]; #ifdef CONFIG_X86_32 + regs->flags = gdb_regs[GDB_PS]; regs->ds = gdb_regs[GDB_DS]; regs->es = gdb_regs[GDB_ES]; regs->cs = gdb_regs[GDB_CS]; @@ -175,6 +189,9 @@ void gdb_regs_to_pt_regs(unsigned long *gdb_regs, struct pt_regs *regs) regs->r13 = gdb_regs[GDB_R13]; regs->r14 = gdb_regs[GDB_R14]; regs->r15 = gdb_regs[GDB_R15]; + regs->flags = gdb_regs32[GDB_PS]; + regs->cs = gdb_regs32[GDB_CS]; + regs->ss = gdb_regs32[GDB_SS]; #endif } diff --git a/include/asm-x86/kgdb.h b/include/asm-x86/kgdb.h index e86b3060bdcb..94d63db10365 100644 --- a/include/asm-x86/kgdb.h +++ b/include/asm-x86/kgdb.h @@ -39,8 +39,9 @@ enum regnames { GDB_FS, /* 14 */ GDB_GS, /* 15 */ }; +#define NUMREGBYTES ((GDB_GS+1)*4) #else /* ! CONFIG_X86_32 */ -enum regnames { +enum regnames64 { GDB_AX, /* 0 */ GDB_BX, /* 1 */ GDB_CX, /* 2 */ @@ -58,18 +59,15 @@ enum regnames { GDB_R14, /* 14 */ GDB_R15, /* 15 */ GDB_PC, /* 16 */ - GDB_PS, /* 17 */ }; -#endif /* CONFIG_X86_32 */ -/* - * Number of bytes of registers: - */ -#ifdef CONFIG_X86_32 -# define NUMREGBYTES 64 -#else -# define NUMREGBYTES ((GDB_PS+1)*8) -#endif +enum regnames32 { + GDB_PS = 34, + GDB_CS, + GDB_SS, +}; +#define NUMREGBYTES ((GDB_SS+1)*4) +#endif /* CONFIG_X86_32 */ static inline void arch_kgdb_breakpoint(void) { -- cgit v1.2.3 From 0dca0fd2bfeb99738708d6c9117994ebf398e72c Mon Sep 17 00:00:00 2001 From: Jason Wessel Date: Fri, 26 Sep 2008 10:36:42 -0500 Subject: kgdboc,tty: Fix tty polling search to use name correctly The tty_find_polling_driver() routine did not correctly check the base part of the tty name. This can lead to kgdboc selecting an incorrect driver, as well as accepting a completely invalid tty such as "echo ffff0 > /sys/module/kgdboc/parameters/kgdboc". Signed-off-by: Jason Wessel --- drivers/char/tty_io.c | 14 ++++++++++++-- 1 file changed, 12 insertions(+), 2 deletions(-) diff --git a/drivers/char/tty_io.c b/drivers/char/tty_io.c index daeb8f766971..e4dce8709541 100644 --- a/drivers/char/tty_io.c +++ b/drivers/char/tty_io.c @@ -695,13 +695,23 @@ struct tty_driver *tty_find_polling_driver(char *name, int *line) { struct tty_driver *p, *res = NULL; int tty_line = 0; + int len; char *str; + for (str = name; *str; str++) + if ((*str >= '0' && *str <= '9') || *str == ',') + break; + if (!*str) + return NULL; + + len = str - name; + tty_line = simple_strtoul(str, &str, 10); + mutex_lock(&tty_mutex); /* Search through the tty devices to look for a match */ list_for_each_entry(p, &tty_drivers, tty_drivers) { - str = name + strlen(p->name); - tty_line = simple_strtoul(str, &str, 10); + if (strncmp(name, p->name, len) != 0) + continue; if (*str == ',') str++; if (*str == '\0') -- cgit v1.2.3 From bc173c5789e1fc6065fd378edc815914b40ee86b Mon Sep 17 00:00:00 2001 From: David Howells Date: Fri, 26 Sep 2008 16:22:58 +0100 Subject: ARM: Delete ARM's own cnt32_to_63.h Delete ARM's own cnt32_to_63.h as the copy in include/linux/ should now be used instead. Signed-off-by: David Howells Signed-off-by: Linus Torvalds --- arch/arm/include/asm/cnt32_to_63.h | 78 -------------------------------------- 1 file changed, 78 deletions(-) delete mode 100644 arch/arm/include/asm/cnt32_to_63.h diff --git a/arch/arm/include/asm/cnt32_to_63.h b/arch/arm/include/asm/cnt32_to_63.h deleted file mode 100644 index 480c873fa746..000000000000 --- a/arch/arm/include/asm/cnt32_to_63.h +++ /dev/null @@ -1,78 +0,0 @@ -/* - * include/asm/cnt32_to_63.h -- extend a 32-bit counter to 63 bits - * - * Author: Nicolas Pitre - * Created: December 3, 2006 - * Copyright: MontaVista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 - * as published by the Free Software Foundation. - */ - -#ifndef __INCLUDE_CNT32_TO_63_H__ -#define __INCLUDE_CNT32_TO_63_H__ - -#include -#include -#include - -/* - * Prototype: u64 cnt32_to_63(u32 cnt) - * Many hardware clock counters are only 32 bits wide and therefore have - * a relatively short period making wrap-arounds rather frequent. This - * is a problem when implementing sched_clock() for example, where a 64-bit - * non-wrapping monotonic value is expected to be returned. - * - * To overcome that limitation, let's extend a 32-bit counter to 63 bits - * in a completely lock free fashion. Bits 0 to 31 of the clock are provided - * by the hardware while bits 32 to 62 are stored in memory. The top bit in - * memory is used to synchronize with the hardware clock half-period. When - * the top bit of both counters (hardware and in memory) differ then the - * memory is updated with a new value, incrementing it when the hardware - * counter wraps around. - * - * Because a word store in memory is atomic then the incremented value will - * always be in synch with the top bit indicating to any potential concurrent - * reader if the value in memory is up to date or not with regards to the - * needed increment. And any race in updating the value in memory is harmless - * as the same value would simply be stored more than once. - * - * The only restriction for the algorithm to work properly is that this - * code must be executed at least once per each half period of the 32-bit - * counter to properly update the state bit in memory. This is usually not a - * problem in practice, but if it is then a kernel timer could be scheduled - * to manage for this code to be executed often enough. - * - * Note that the top bit (bit 63) in the returned value should be considered - * as garbage. It is not cleared here because callers are likely to use a - * multiplier on the returned value which can get rid of the top bit - * implicitly by making the multiplier even, therefore saving on a runtime - * clear-bit instruction. Otherwise caller must remember to clear the top - * bit explicitly. - */ - -/* this is used only to give gcc a clue about good code generation */ -typedef union { - struct { -#if defined(__LITTLE_ENDIAN) - u32 lo, hi; -#elif defined(__BIG_ENDIAN) - u32 hi, lo; -#endif - }; - u64 val; -} cnt32_to_63_t; - -#define cnt32_to_63(cnt_lo) \ -({ \ - static volatile u32 __m_cnt_hi = 0; \ - cnt32_to_63_t __x; \ - __x.hi = __m_cnt_hi; \ - __x.lo = (cnt_lo); \ - if (unlikely((s32)(__x.hi ^ __x.lo) < 0)) \ - __m_cnt_hi = __x.hi = (__x.hi ^ 0x80000000) + (__x.hi >> 31); \ - __x.val; \ -}) - -#endif -- cgit v1.2.3 From 1575da9ee4804ca889f32f8567dd7965e6fe4abc Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Wed, 24 Sep 2008 14:57:11 +0900 Subject: m32r: remove the unused NOHIGHMEM option Remove the unused NOHIGHMEM option. Reviewed-by: Robert P. J. Day Signed-off-by: Adrian Bunk Signed-off-by: Andrew Morton Signed-off-by: Hirokazu Takata --- arch/m32r/Kconfig | 4 ---- 1 file changed, 4 deletions(-) diff --git a/arch/m32r/Kconfig b/arch/m32r/Kconfig index a5f864c445b2..0266519491a4 100644 --- a/arch/m32r/Kconfig +++ b/arch/m32r/Kconfig @@ -216,10 +216,6 @@ config MEMORY_SIZE default "01000000" if PLAT_M32104UT default "00800000" if PLAT_OAKS32R -config NOHIGHMEM - bool - default y - config ARCH_DISCONTIGMEM_ENABLE bool "Internal RAM Support" depends on CHIP_M32700 || CHIP_M32102 || CHIP_VDEC2 || CHIP_OPSP || CHIP_M32104 -- cgit v1.2.3 From 1b20b093e7f81ff8cb322773684b260d1487b610 Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Wed, 24 Sep 2008 14:58:54 +0900 Subject: m32r: don't offer CONFIG_ISA As far as I know no M32R hardware actually has ISA slots. And ISA drivers don't compile on M32R. Signed-off-by: Adrian Bunk Signed-off-by: Andrew Morton Signed-off-by: Hirokazu Takata --- arch/m32r/Kconfig | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-) diff --git a/arch/m32r/Kconfig b/arch/m32r/Kconfig index 0266519491a4..f57113f1f892 100644 --- a/arch/m32r/Kconfig +++ b/arch/m32r/Kconfig @@ -406,11 +406,7 @@ config PCI_DIRECT source "drivers/pci/Kconfig" config ISA - bool "ISA support" - help - Find out whether you have ISA slots on your motherboard. ISA is the - name of a bus system, i.e. the way the CPU talks to the other stuff - inside your box. If you have ISA, say Y, otherwise N. + bool source "drivers/pcmcia/Kconfig" -- cgit v1.2.3 From affa6b120fa895e2bed0e131282fe89c05da1008 Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Wed, 24 Sep 2008 14:59:57 +0900 Subject: m32r: export empty_zero_page ERROR: "empty_zero_page" [fs/ext4/ext4dev.ko] undefined! Reported-by: Adrian Bunk Signed-off-by: Adrian Bunk Signed-off-by: Andrew Morton Signed-off-by: Hirokazu Takata --- arch/m32r/kernel/m32r_ksyms.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/m32r/kernel/m32r_ksyms.c b/arch/m32r/kernel/m32r_ksyms.c index 16bcb189a383..22624b51d4d3 100644 --- a/arch/m32r/kernel/m32r_ksyms.c +++ b/arch/m32r/kernel/m32r_ksyms.c @@ -14,6 +14,7 @@ #include #include #include +#include /* platform dependent support */ EXPORT_SYMBOL(boot_cpu_data); @@ -65,6 +66,7 @@ EXPORT_SYMBOL(memset); EXPORT_SYMBOL(copy_page); EXPORT_SYMBOL(clear_page); EXPORT_SYMBOL(strlen); +EXPORT_SYMBOL(empty_zero_page); EXPORT_SYMBOL(_inb); EXPORT_SYMBOL(_inw); -- cgit v1.2.3 From 4b65fd41807dec1484003a7618c492477511509e Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Wed, 24 Sep 2008 15:01:15 +0900 Subject: m32r: export __ndelay ERROR: "__ndelay" [drivers/spi/spi_bitbang.ko] undefined! Reported-by: Adrian Bunk Signed-off-by: Adrian Bunk Signed-off-by: Andrew Morton Signed-off-by: Hirokazu Takata --- arch/m32r/lib/delay.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/m32r/lib/delay.c b/arch/m32r/lib/delay.c index 59bfc34e0d9f..ced549be80f5 100644 --- a/arch/m32r/lib/delay.c +++ b/arch/m32r/lib/delay.c @@ -6,6 +6,7 @@ */ #include +#include #ifdef CONFIG_SMP #include #include @@ -121,3 +122,4 @@ void __ndelay(unsigned long nsecs) { __const_udelay(nsecs * 0x00005); /* 2**32 / 1000000000 (rounded up) */ } +EXPORT_SYMBOL(__ndelay); -- cgit v1.2.3 From 81e4807303c416a0defdce8b23a6204416d33280 Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Wed, 24 Sep 2008 15:01:47 +0900 Subject: m32r/kernel/: cleanups This patch contains the following cleanups: - make the following needlessly global code static: - entry.S: resume_userspace - process.c: pm_idle - process.c: default_idle() - smp.c: send_IPI_allbutself() - time.c: timer_interrupt() - time.c: struct irq0 - traps.c: set_eit_vector_entries() - traps.c: kstack_depth_to_print - traps.c: show_trace() - traps.c: die_lock - remove the following unused code: - head.S: startup_32 - process.c: hlt_counter - process.c: disable_hlt() - process.c: enable_hlt() - process.c: dump_task_regs() - remove the following variables and their usages since they were always 0: - irq.c: irq_err_count - irq.c: irq_mis_count Signed-off-by: Adrian Bunk Signed-off-by: Andrew Morton Signed-off-by: Hirokazu Takata --- arch/m32r/kernel/entry.S | 2 +- arch/m32r/kernel/head.S | 1 - arch/m32r/kernel/irq.c | 6 ------ arch/m32r/kernel/process.c | 30 ++---------------------------- arch/m32r/kernel/smp.c | 4 ++-- arch/m32r/kernel/time.c | 5 ++--- arch/m32r/kernel/traps.c | 8 ++++---- 7 files changed, 11 insertions(+), 45 deletions(-) diff --git a/arch/m32r/kernel/entry.S b/arch/m32r/kernel/entry.S index d4eaa2fd1818..612d35b082a6 100644 --- a/arch/m32r/kernel/entry.S +++ b/arch/m32r/kernel/entry.S @@ -143,7 +143,7 @@ ret_from_intr: and3 r4, r4, #0x8000 ; check BSM bit #endif beqz r4, resume_kernel -ENTRY(resume_userspace) +resume_userspace: DISABLE_INTERRUPTS(r4) ; make sure we don't miss an interrupt ; setting need_resched or sigpending ; between sampling and the iret diff --git a/arch/m32r/kernel/head.S b/arch/m32r/kernel/head.S index dab7436d7bbe..40180778a5c7 100644 --- a/arch/m32r/kernel/head.S +++ b/arch/m32r/kernel/head.S @@ -29,7 +29,6 @@ __INITDATA .global _end ENTRY(stext) ENTRY(_stext) -ENTRY(startup_32) /* Setup up the stack pointer */ LDIMM (r0, spi_stack_top) LDIMM (r1, spu_stack_top) diff --git a/arch/m32r/kernel/irq.c b/arch/m32r/kernel/irq.c index d0c5b0b7da2f..2aeae4670098 100644 --- a/arch/m32r/kernel/irq.c +++ b/arch/m32r/kernel/irq.c @@ -22,9 +22,6 @@ #include #include -atomic_t irq_err_count; -atomic_t irq_mis_count; - /* * Generic, controller-independent functions: */ @@ -63,9 +60,6 @@ int show_interrupts(struct seq_file *p, void *v) seq_putc(p, '\n'); skip: spin_unlock_irqrestore(&irq_desc[i].lock, flags); - } else if (i == NR_IRQS) { - seq_printf(p, "ERR: %10u\n", atomic_read(&irq_err_count)); - seq_printf(p, "MIS: %10u\n", atomic_read(&irq_mis_count)); } return 0; } diff --git a/arch/m32r/kernel/process.c b/arch/m32r/kernel/process.c index a689e2978b6e..5be4faaf5b1c 100644 --- a/arch/m32r/kernel/process.c +++ b/arch/m32r/kernel/process.c @@ -35,8 +35,6 @@ #include -static int hlt_counter=0; - /* * Return saved PC of a blocked thread. */ @@ -48,31 +46,16 @@ unsigned long thread_saved_pc(struct task_struct *tsk) /* * Powermanagement idle function, if any.. */ -void (*pm_idle)(void) = NULL; -EXPORT_SYMBOL(pm_idle); +static void (*pm_idle)(void) = NULL; void (*pm_power_off)(void) = NULL; EXPORT_SYMBOL(pm_power_off); -void disable_hlt(void) -{ - hlt_counter++; -} - -EXPORT_SYMBOL(disable_hlt); - -void enable_hlt(void) -{ - hlt_counter--; -} - -EXPORT_SYMBOL(enable_hlt); - /* * We use this is we don't have any better * idle routine.. */ -void default_idle(void) +static void default_idle(void) { /* M32R_FIXME: Please use "cpu_sleep" mode. */ cpu_relax(); @@ -260,15 +243,6 @@ int copy_thread(int nr, unsigned long clone_flags, unsigned long spu, return 0; } -/* - * Capture the user space registers if the task is not running (in user space) - */ -int dump_task_regs(struct task_struct *tsk, elf_gregset_t *regs) -{ - /* M32R_FIXME */ - return 1; -} - asmlinkage int sys_fork(unsigned long r0, unsigned long r1, unsigned long r2, unsigned long r3, unsigned long r4, unsigned long r5, unsigned long r6, struct pt_regs regs) diff --git a/arch/m32r/kernel/smp.c b/arch/m32r/kernel/smp.c index 7577f971ea4e..929e5c9d3ad9 100644 --- a/arch/m32r/kernel/smp.c +++ b/arch/m32r/kernel/smp.c @@ -84,7 +84,7 @@ void smp_send_timer(void); void smp_ipi_timer_interrupt(struct pt_regs *); void smp_local_timer_interrupt(void); -void send_IPI_allbutself(int, int); +static void send_IPI_allbutself(int, int); static void send_IPI_mask(cpumask_t, int, int); unsigned long send_IPI_mask_phys(cpumask_t, int, int); @@ -722,7 +722,7 @@ void smp_local_timer_interrupt(void) * ---------- --- -------------------------------------------------------- * *==========================================================================*/ -void send_IPI_allbutself(int ipi_num, int try) +static void send_IPI_allbutself(int ipi_num, int try) { cpumask_t cpumask; diff --git a/arch/m32r/kernel/time.c b/arch/m32r/kernel/time.c index 994cc1556355..6ea017727cce 100644 --- a/arch/m32r/kernel/time.c +++ b/arch/m32r/kernel/time.c @@ -34,7 +34,6 @@ #include #ifdef CONFIG_SMP -extern void send_IPI_allbutself(int, int); extern void smp_local_timer_interrupt(void); #endif @@ -188,7 +187,7 @@ static long last_rtc_update = 0; * timer_interrupt() needs to keep up the real-time clock, * as well as call the "do_timer()" routine every clocktick */ -irqreturn_t timer_interrupt(int irq, void *dev_id) +static irqreturn_t timer_interrupt(int irq, void *dev_id) { #ifndef CONFIG_SMP profile_tick(CPU_PROFILING); @@ -228,7 +227,7 @@ irqreturn_t timer_interrupt(int irq, void *dev_id) return IRQ_HANDLED; } -struct irqaction irq0 = { +static struct irqaction irq0 = { .handler = timer_interrupt, .flags = IRQF_DISABLED, .mask = CPU_MASK_NONE, diff --git a/arch/m32r/kernel/traps.c b/arch/m32r/kernel/traps.c index 46159a4e644b..03b14e55cd89 100644 --- a/arch/m32r/kernel/traps.c +++ b/arch/m32r/kernel/traps.c @@ -61,7 +61,7 @@ extern unsigned long eit_vector[]; ((unsigned long)func - (unsigned long)eit_vector - entry*4)/4 \ + 0xff000000UL -void set_eit_vector_entries(void) +static void set_eit_vector_entries(void) { extern void default_eit_handler(void); extern void system_call(void); @@ -121,9 +121,9 @@ void __init trap_init(void) cpu_init(); } -int kstack_depth_to_print = 24; +static int kstack_depth_to_print = 24; -void show_trace(struct task_struct *task, unsigned long *stack) +static void show_trace(struct task_struct *task, unsigned long *stack) { unsigned long addr; @@ -224,7 +224,7 @@ bad: printk("\n"); } -DEFINE_SPINLOCK(die_lock); +static DEFINE_SPINLOCK(die_lock); void die(const char * str, struct pt_regs * regs, long err) { -- cgit v1.2.3 From 19506fc51852e859bb08ab5abbdb8fd02b7392f2 Mon Sep 17 00:00:00 2001 From: Bruno Randolf Date: Thu, 25 Sep 2008 16:45:10 +0200 Subject: [MIPS] au1000: Make sure GPIO value is zero or one David Brownell wrote: > The problem is that "value" is zero-or-nonzero. > This code wrongly assumes it's zero-or-one. > Possible fix: "((!!value) << gpio)". Signed-off-by: Bruno Randolf Signed-off-by: Ralf Baechle --- arch/mips/au1000/common/gpio.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/mips/au1000/common/gpio.c b/arch/mips/au1000/common/gpio.c index 1f058434b726..e660ddd611c4 100644 --- a/arch/mips/au1000/common/gpio.c +++ b/arch/mips/au1000/common/gpio.c @@ -48,7 +48,7 @@ static void au1xxx_gpio2_write(unsigned gpio, int value) { gpio -= AU1XXX_GPIO_BASE; - gpio2->output = (GPIO2_OUTPUT_ENABLE_MASK << gpio) | (value << gpio); + gpio2->output = (GPIO2_OUTPUT_ENABLE_MASK << gpio) | ((!!value) << gpio); } static int au1xxx_gpio2_direction_input(unsigned gpio) @@ -62,7 +62,7 @@ static int au1xxx_gpio2_direction_output(unsigned gpio, int value) { gpio -= AU1XXX_GPIO_BASE; gpio2->dir |= 0x01 << gpio; - gpio2->output = (GPIO2_OUTPUT_ENABLE_MASK << gpio) | (value << gpio); + gpio2->output = (GPIO2_OUTPUT_ENABLE_MASK << gpio) | ((!!value) << gpio); return 0; } -- cgit v1.2.3 From f4d15f1c877644a604f8c8c3d094c13f9f8bdcf2 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Sat, 27 Sep 2008 15:05:06 +0100 Subject: [MIPS] IP27: Switch to dynamic interrupt routing avoding panic on error. pcibios_map_irq is no way of returning an error but on IP27 an interrupt is possibly not routable when running out of resources. So do the interrupt routing at pcibios_enable_device time. Signed-off-by: Ralf Baechle --- arch/mips/pci/pci-ip27.c | 40 +++++++++++++++++++++++++++++++--------- 1 file changed, 31 insertions(+), 9 deletions(-) diff --git a/arch/mips/pci/pci-ip27.c b/arch/mips/pci/pci-ip27.c index bd78368c82bf..f97ab1461012 100644 --- a/arch/mips/pci/pci-ip27.c +++ b/arch/mips/pci/pci-ip27.c @@ -142,26 +142,48 @@ int __cpuinit bridge_probe(nasid_t nasid, int widget_id, int masterwid) * on any one of the hubs connected to its xbow. */ int __devinit pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) +{ + return 0; +} + +/* Most MIPS systems have straight-forward swizzling needs. */ +static inline u8 bridge_swizzle(u8 pin, u8 slot) +{ + return (((pin - 1) + slot) % 4) + 1; +} + +static inline struct pci_dev *bridge_root_dev(struct pci_dev *dev) +{ + while (dev->bus->parent) { + /* Move up the chain of bridges. */ + dev = dev->bus->self; + } + + return dev; +} + +/* Do platform specific device initialization at pci_enable_device() time */ +int pcibios_plat_dev_init(struct pci_dev *dev) { struct bridge_controller *bc = BRIDGE_CONTROLLER(dev->bus); - int irq = bc->pci_int[slot]; + struct pci_dev *rdev = bridge_root_dev(dev); + int slot = PCI_SLOT(rdev->devfn); + int irq; + irq = bc->pci_int[slot]; if (irq == -1) { - irq = bc->pci_int[slot] = request_bridge_irq(bc); + irq = request_bridge_irq(bc); if (irq < 0) - panic("Can't allocate interrupt for PCI device %s\n", - pci_name(dev)); + return irq; + + bc->pci_int[slot] = irq; } irq_to_bridge[irq] = bc; irq_to_slot[irq] = slot; - return irq; -} + dev->irq = irq; -/* Do platform specific device initialization at pci_enable_device() time */ -int pcibios_plat_dev_init(struct pci_dev *dev) -{ return 0; } -- cgit v1.2.3 From 2dc42b47a7886bdc87514990c68ecdf8de61e653 Mon Sep 17 00:00:00 2001 From: Aurelien Jarno Date: Sat, 27 Sep 2008 16:06:16 +0200 Subject: [MIPS] BCM47xx: Fix build error due to missing PCI functions This patch defines pcibios_map_irq() and pcibios_plat_dev_init() for the BCM47xx platform. It fixes the regression introduced by commit aab547ce0d1493d400b6468c521a0137cd8c1edf. Signed-off-by: Aurelien Jarno Signed-off-by: Ralf Baechle --- arch/mips/pci/Makefile | 1 + arch/mips/pci/pci-bcm47xx.c | 60 +++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 61 insertions(+) create mode 100644 arch/mips/pci/pci-bcm47xx.c diff --git a/arch/mips/pci/Makefile b/arch/mips/pci/Makefile index 15e01aec37fd..c8c32f417b6c 100644 --- a/arch/mips/pci/Makefile +++ b/arch/mips/pci/Makefile @@ -15,6 +15,7 @@ obj-$(CONFIG_SOC_TX3927) += ops-tx3927.o obj-$(CONFIG_PCI_VR41XX) += ops-vr41xx.o pci-vr41xx.o obj-$(CONFIG_MARKEINS) += ops-emma2rh.o pci-emma2rh.o fixup-emma2rh.o obj-$(CONFIG_PCI_TX4927) += ops-tx4927.o +obj-$(CONFIG_BCM47XX) += pci-bcm47xx.o # # These are still pretty much in the old state, watch, go blind. diff --git a/arch/mips/pci/pci-bcm47xx.c b/arch/mips/pci/pci-bcm47xx.c new file mode 100644 index 000000000000..bea9b6cdfdbf --- /dev/null +++ b/arch/mips/pci/pci-bcm47xx.c @@ -0,0 +1,60 @@ +/* + * Copyright (C) 2008 Aurelien Jarno + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include + +int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) +{ + return 0; +} + +int pcibios_plat_dev_init(struct pci_dev *dev) +{ + int res; + u8 slot, pin; + + res = ssb_pcibios_plat_dev_init(dev); + if (res < 0) { + printk(KERN_ALERT "PCI: Failed to init device %s\n", + pci_name(dev)); + return res; + } + + pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin); + slot = PCI_SLOT(dev->devfn); + res = ssb_pcibios_map_irq(dev, slot, pin); + + /* IRQ-0 and IRQ-1 are software interrupts. */ + if (res < 2) { + printk(KERN_ALERT "PCI: Failed to map IRQ of device %s\n", + pci_name(dev)); + return res; + } + + dev->irq = res; + return 0; +} + -- cgit v1.2.3 From ac82da3381fc663dbda31612a0bff60bc41676a3 Mon Sep 17 00:00:00 2001 From: Aurelien Jarno Date: Fri, 26 Sep 2008 22:27:11 +0200 Subject: [SSB] Initialise dma_mask for SSB_BUSTYPE_SSB devices For SSB_BUSTYPE_SSB type devices, we need to initialize dma_mask using coherent_dma_mask so that calls to dma_set_mask() succeed. It fixes the regression on the b44 driver introduced by commit f225763a7d6c92c4932dbd528437997078496fcc Signed-off-by: Aurelien Jarno Signed-off-by: Ralf Baechle --- drivers/ssb/main.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/ssb/main.c b/drivers/ssb/main.c index 87ab2443e66d..0ffabf5c0b60 100644 --- a/drivers/ssb/main.c +++ b/drivers/ssb/main.c @@ -471,6 +471,7 @@ static int ssb_devices_register(struct ssb_bus *bus) #endif break; case SSB_BUSTYPE_SSB: + dev->dma_mask = &dev->coherent_dma_mask; break; } -- cgit v1.2.3 From 3d977760b9478538821a75dd5eb74d0f2a2b01e3 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Sat, 27 Sep 2008 19:32:16 +0200 Subject: Swarm: Fix crash due to missing initialization If things are just right this will result in the hws[0]->parent being passed to ide_host_add() being non-zero and an ooops a little later. Signed-off-by: Ralf Baechle Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/mips/swarm.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/ide/mips/swarm.c b/drivers/ide/mips/swarm.c index badf79fc9e3a..39c9ee995857 100644 --- a/drivers/ide/mips/swarm.c +++ b/drivers/ide/mips/swarm.c @@ -107,6 +107,7 @@ static int __devinit swarm_ide_probe(struct device *dev) base = ioremap(offset, size); + memset(&hw, 0, sizeof(hw)); for (i = 0; i <= 7; i++) hw.io_ports_array[i] = (unsigned long)(base + ((0x1f0 + i) << 5)); -- cgit v1.2.3 From 801bd32e205ca6ef78dcaf80121f1eccb89b8c1e Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Sat, 27 Sep 2008 19:32:17 +0200 Subject: ide-tape: fix vendor strings Remove superfluous two bytes from each string buffer and add proper length format specifiers. Signed-off-by: Borislav Petkov Tested-by: Mark de Wever Acked-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-tape.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index 1bce84b56630..3833189144ed 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -2338,7 +2338,7 @@ static void idetape_get_inquiry_results(ide_drive_t *drive) { idetape_tape_t *tape = drive->driver_data; struct ide_atapi_pc pc; - char fw_rev[6], vendor_id[10], product_id[18]; + char fw_rev[4], vendor_id[8], product_id[16]; idetape_create_inquiry_cmd(&pc); if (idetape_queue_pc_tail(drive, &pc)) { @@ -2350,11 +2350,11 @@ static void idetape_get_inquiry_results(ide_drive_t *drive) memcpy(product_id, &pc.buf[16], 16); memcpy(fw_rev, &pc.buf[32], 4); - ide_fixstring(vendor_id, 10, 0); - ide_fixstring(product_id, 18, 0); - ide_fixstring(fw_rev, 6, 0); + ide_fixstring(vendor_id, 8, 0); + ide_fixstring(product_id, 16, 0); + ide_fixstring(fw_rev, 4, 0); - printk(KERN_INFO "ide-tape: %s <-> %s: %s %s rev %s\n", + printk(KERN_INFO "ide-tape: %s <-> %s: %.8s %.16s rev %.4s\n", drive->name, tape->name, vendor_id, product_id, fw_rev); } -- cgit v1.2.3 From 278ecfb8f4100c0edc2bc77695b591ea16388829 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sat, 27 Sep 2008 19:32:17 +0200 Subject: ide: note that IDE generic may prevent other drivers from attaching Enabling IDE generic may prevent ATA controllers located on legacy ports from being attached to more proper driver or can prevent other controllers which share the IRQ from working. Note it in the help message. Signed-off-by: Tejun Heo Cc: xerces8 Cc: Jeff Garzik Cc: stein@hermes.si [bart: s/will grab/may grab/ since Borislav has fixed PCI-case for .28] Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/Kconfig | 14 ++++++++++++++ 1 file changed, 14 insertions(+) diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig index fc735ab08ff4..8e93a797c93d 100644 --- a/drivers/ide/Kconfig +++ b/drivers/ide/Kconfig @@ -292,6 +292,20 @@ config IDE_GENERIC tristate "generic/default IDE chipset support" depends on ALPHA || X86 || IA64 || M32R || MIPS help + This is the generic IDE driver. This driver attaches to the + fixed legacy ports (e.g. on PCs 0x1f0/0x170, 0x1e8/0x168 and + so on). Please note that if this driver is built into the + kernel or loaded before other ATA (IDE or libata) drivers + and the controller is located at legacy ports, this driver + may grab those ports and thus can prevent the controller + specific driver from attaching. + + Also, currently, IDE generic doesn't allow IRQ sharing + meaning that the IRQs it grabs won't be available to other + controllers sharing those IRQs which usually makes drivers + for those controllers fail. Generally, it's not a good idea + to load IDE generic driver on modern systems. + If unsure, say N. config BLK_DEV_PLATFORM -- cgit v1.2.3 From d0eb40628e29c2bb3b5f8242b1d2f50b1a88d9da Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?M=C3=A1rton=20N=C3=A9meth?= Date: Sat, 27 Sep 2008 19:32:17 +0200 Subject: cdrom: update ioctl documentation MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Correct copy-paste problem: CDROMCLOSETRAY is about closing the tray, not opening it. Signed-off-by: Márton Németh Signed-off-by: Andrew Morton Cc: Jens Axboe Signed-off-by: Bartlomiej Zolnierkiewicz --- Documentation/ioctl/cdrom.txt | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/Documentation/ioctl/cdrom.txt b/Documentation/ioctl/cdrom.txt index 62d4af44ec4a..59df81c8da2b 100644 --- a/Documentation/ioctl/cdrom.txt +++ b/Documentation/ioctl/cdrom.txt @@ -271,14 +271,14 @@ CDROMCLOSETRAY pendant of CDROMEJECT usage: - ioctl(fd, CDROMEJECT, 0); + ioctl(fd, CDROMCLOSETRAY, 0); inputs: none outputs: none error returns: - ENOSYS cd drive not capable of ejecting + ENOSYS cd drive not capable of closing the tray EBUSY other processes are accessing drive, or door is locked notes: -- cgit v1.2.3 From c9eeb248f3b44939532a9716bc06413383aa5d63 Mon Sep 17 00:00:00 2001 From: Boaz Harrosh Date: Wed, 24 Sep 2008 12:00:22 +0300 Subject: [SCSI] qlogicpti: fix sg list traversal error in continuation entries The current sg list traversal logic for the continuation entries doesn't advance the list pointer once all seven slots are used, so the next continuation entry (if there is one) wrongly begins again at the start of the sg list. Fix by advancing the sg pointer after the for_each_sg(). Reported-by: Meelis Roos Cc: David Miller Signed-off-by: James Bottomley --- drivers/scsi/qlogicpti.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/scsi/qlogicpti.c b/drivers/scsi/qlogicpti.c index 4a1cf6377f6c..905350896725 100644 --- a/drivers/scsi/qlogicpti.c +++ b/drivers/scsi/qlogicpti.c @@ -914,6 +914,7 @@ static inline int load_cmd(struct scsi_cmnd *Cmnd, struct Command_Entry *cmd, ds[i].d_count = sg_dma_len(s); } sg_count -= n; + sg = s; } } else { cmd->dataseg[0].d_base = 0; -- cgit v1.2.3 From 4c1eb90a0908c0c60db2169dce08fb672e7582f1 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sun, 28 Sep 2008 07:39:01 +0900 Subject: sata_nv: reinstate nv_hardreset() for non generic controllers Commit 2fd673ecf0378ddeeeb87b3605e50212e0c0ddc6 which tried to remove hardreset for generic accidentally removed it for all flavors as all others were inheriting from nv_generic_ops. This patch reinstates nv_hardreset() and puts it into nv_common_ops which all flavors inherit from. nv_generic_ops now inherits from nv_common_ops and overrides .hardreset to ATA_OP_NULL. While at it, explain why nv_hardreset and ATA_OP_NULL override are necessary. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/ata/sata_nv.c | 46 ++++++++++++++++++++++++++++++++++++++++------ 1 file changed, 40 insertions(+), 6 deletions(-) diff --git a/drivers/ata/sata_nv.c b/drivers/ata/sata_nv.c index 1e1f3f3757ae..14601dc05e41 100644 --- a/drivers/ata/sata_nv.c +++ b/drivers/ata/sata_nv.c @@ -309,6 +309,8 @@ static void nv_nf2_freeze(struct ata_port *ap); static void nv_nf2_thaw(struct ata_port *ap); static void nv_ck804_freeze(struct ata_port *ap); static void nv_ck804_thaw(struct ata_port *ap); +static int nv_hardreset(struct ata_link *link, unsigned int *class, + unsigned long deadline); static int nv_adma_slave_config(struct scsi_device *sdev); static int nv_adma_check_atapi_dma(struct ata_queued_cmd *qc); static void nv_adma_qc_prep(struct ata_queued_cmd *qc); @@ -403,28 +405,45 @@ static struct scsi_host_template nv_swncq_sht = { .slave_configure = nv_swncq_slave_config, }; -static struct ata_port_operations nv_generic_ops = { +/* OSDL bz3352 reports that some nv controllers can't determine device + * signature reliably and nv_hardreset is implemented to work around + * the problem. This was reported on nf3 and it's unclear whether any + * other controllers are affected. However, the workaround has been + * applied to all variants and there isn't much to gain by trying to + * find out exactly which ones are affected at this point especially + * because NV has moved over to ahci for newer controllers. + */ +static struct ata_port_operations nv_common_ops = { .inherits = &ata_bmdma_port_ops, - .hardreset = ATA_OP_NULL, + .hardreset = nv_hardreset, .scr_read = nv_scr_read, .scr_write = nv_scr_write, }; +/* OSDL bz11195 reports that link doesn't come online after hardreset + * on generic nv's and there have been several other similar reports + * on linux-ide. Disable hardreset for generic nv's. + */ +static struct ata_port_operations nv_generic_ops = { + .inherits = &nv_common_ops, + .hardreset = ATA_OP_NULL, +}; + static struct ata_port_operations nv_nf2_ops = { - .inherits = &nv_generic_ops, + .inherits = &nv_common_ops, .freeze = nv_nf2_freeze, .thaw = nv_nf2_thaw, }; static struct ata_port_operations nv_ck804_ops = { - .inherits = &nv_generic_ops, + .inherits = &nv_common_ops, .freeze = nv_ck804_freeze, .thaw = nv_ck804_thaw, .host_stop = nv_ck804_host_stop, }; static struct ata_port_operations nv_adma_ops = { - .inherits = &nv_generic_ops, + .inherits = &nv_common_ops, .check_atapi_dma = nv_adma_check_atapi_dma, .sff_tf_read = nv_adma_tf_read, @@ -448,7 +467,7 @@ static struct ata_port_operations nv_adma_ops = { }; static struct ata_port_operations nv_swncq_ops = { - .inherits = &nv_generic_ops, + .inherits = &nv_common_ops, .qc_defer = ata_std_qc_defer, .qc_prep = nv_swncq_qc_prep, @@ -1586,6 +1605,21 @@ static void nv_mcp55_thaw(struct ata_port *ap) ata_sff_thaw(ap); } +static int nv_hardreset(struct ata_link *link, unsigned int *class, + unsigned long deadline) +{ + int rc; + + /* SATA hardreset fails to retrieve proper device signature on + * some controllers. Request follow up SRST. For more info, + * see http://bugzilla.kernel.org/show_bug.cgi?id=3352 + */ + rc = sata_sff_hardreset(link, class, deadline); + if (rc) + return rc; + return -EAGAIN; +} + static void nv_adma_error_handler(struct ata_port *ap) { struct nv_adma_port_priv *pp = ap->private_data; -- cgit v1.2.3 From 7e6cfb54b1ff4b64d74aa8cd191204c9598c073d Mon Sep 17 00:00:00 2001 From: Boaz Harrosh Date: Mon, 29 Sep 2008 09:38:55 +0200 Subject: scsi: fix fall out of sg-chaining patch in qlogicpti Boaz writes: "I've reviewed all patches since Matthew's, and I find one small problem. In the load_cmd() there is a compound loop where the first 4 sg's are set then the rest are set into a memory structure in group of 7 sg's. Well the second 7-group and on is a bug because sg pointer does not advance. This is a fall out from Jens's patch." The reporter, Meelis Roos , verified that this patch does indeed fix his problem with qlogicpti. Signed-off-by: Jens Axboe --- drivers/scsi/qlogicpti.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/scsi/qlogicpti.c b/drivers/scsi/qlogicpti.c index 4a1cf6377f6c..905350896725 100644 --- a/drivers/scsi/qlogicpti.c +++ b/drivers/scsi/qlogicpti.c @@ -914,6 +914,7 @@ static inline int load_cmd(struct scsi_cmnd *Cmnd, struct Command_Entry *cmd, ds[i].d_count = sg_dma_len(s); } sg_count -= n; + sg = s; } } else { cmd->dataseg[0].d_base = 0; -- cgit v1.2.3 From ec2cd95f340fb07b905839ee219b3846ecf58396 Mon Sep 17 00:00:00 2001 From: Timur Tabi Date: Tue, 29 Jul 2008 16:35:52 -0500 Subject: ALSA: make the CS4270 driver a new-style I2C driver Update the CS4270 ALSA device driver to use the new-style I2C interface. Starting with the 2.6.27 PowerPC kernel, I2C devices that have entries in the device trees can no longer be probed by old-style I2C drivers. The device tree for Freescale MPC8610 HPCD has included an entry for the CS4270 since 2.6.25, but that entry was previously ignored by the PowerPC I2C subsystem. Since that's no longer the case, the best solution is to update the CS4270 driver to a new-style interface, rather than try to revert the behavior of new PowerPC I2C subsystem. Signed-off-by: Timur Tabi Signed-off-by: Takashi Iwai --- sound/soc/codecs/cs4270.c | 71 ++++++++++------------------------------------- 1 file changed, 15 insertions(+), 56 deletions(-) diff --git a/sound/soc/codecs/cs4270.c b/sound/soc/codecs/cs4270.c index 9deb8c74fdfd..82d94f00aa45 100644 --- a/sound/soc/codecs/cs4270.c +++ b/sound/soc/codecs/cs4270.c @@ -490,34 +490,7 @@ static int cs4270_mute(struct snd_soc_dai *dai, int mute) #endif -static int cs4270_i2c_probe(struct i2c_adapter *adap, int addr, int kind); - -/* - * Notify the driver that a new I2C bus has been found. - * - * This function is called for each I2C bus in the system. The function - * then asks the I2C subsystem to probe that bus at the addresses on which - * our device (the CS4270) could exist. If a device is found at one of - * those addresses, then our probe function (cs4270_i2c_probe) is called. - */ -static int cs4270_i2c_attach(struct i2c_adapter *adapter) -{ - return i2c_probe(adapter, &addr_data, cs4270_i2c_probe); -} - -static int cs4270_i2c_detach(struct i2c_client *client) -{ - struct snd_soc_codec *codec = i2c_get_clientdata(client); - - i2c_detach_client(client); - codec->control_data = NULL; - - kfree(codec->reg_cache); - codec->reg_cache = NULL; - - kfree(client); - return 0; -} +static int cs4270_i2c_probe(struct i2c_client *, const struct i2c_device_id *); /* A list of non-DAPM controls that the CS4270 supports */ static const struct snd_kcontrol_new cs4270_snd_controls[] = { @@ -525,14 +498,19 @@ static const struct snd_kcontrol_new cs4270_snd_controls[] = { CS4270_VOLA, CS4270_VOLB, 0, 0xFF, 1) }; +static const struct i2c_device_id cs4270_id[] = { + {"cs4270", 0}, + {} +}; +MODULE_DEVICE_TABLE(i2c, cs4270_id); + static struct i2c_driver cs4270_i2c_driver = { .driver = { .name = "CS4270 I2C", .owner = THIS_MODULE, }, - .id = I2C_DRIVERID_CS4270, - .attach_adapter = cs4270_i2c_attach, - .detach_client = cs4270_i2c_detach, + .id_table = cs4270_id, + .probe = cs4270_i2c_probe, }; /* @@ -561,11 +539,11 @@ static struct snd_soc_device *cs4270_socdev; * Note: snd_soc_new_pcms() must be called before this function can be called, * because of snd_ctl_add(). */ -static int cs4270_i2c_probe(struct i2c_adapter *adapter, int addr, int kind) +static int cs4270_i2c_probe(struct i2c_client *i2c_client, + const struct i2c_device_id *id) { struct snd_soc_device *socdev = cs4270_socdev; struct snd_soc_codec *codec = socdev->codec; - struct i2c_client *i2c_client = NULL; int i; int ret = 0; @@ -578,12 +556,6 @@ static int cs4270_i2c_probe(struct i2c_adapter *adapter, int addr, int kind) /* Note: codec_dai->codec is NULL here */ - i2c_client = kzalloc(sizeof(struct i2c_client), GFP_KERNEL); - if (!i2c_client) { - printk(KERN_ERR "cs4270: could not allocate I2C client\n"); - return -ENOMEM; - } - codec->reg_cache = kzalloc(CS4270_NUMREGS, GFP_KERNEL); if (!codec->reg_cache) { printk(KERN_ERR "cs4270: could not allocate register cache\n"); @@ -591,13 +563,6 @@ static int cs4270_i2c_probe(struct i2c_adapter *adapter, int addr, int kind) goto error; } - i2c_set_clientdata(i2c_client, codec); - strcpy(i2c_client->name, "CS4270"); - - i2c_client->driver = &cs4270_i2c_driver; - i2c_client->adapter = adapter; - i2c_client->addr = addr; - /* Verify that we have a CS4270 */ ret = i2c_smbus_read_byte_data(i2c_client, CS4270_CHIPID); @@ -612,18 +577,10 @@ static int cs4270_i2c_probe(struct i2c_adapter *adapter, int addr, int kind) goto error; } - printk(KERN_INFO "cs4270: found device at I2C address %X\n", addr); + printk(KERN_INFO "cs4270: found device at I2C address %X\n", + i2c_client->addr); printk(KERN_INFO "cs4270: hardware revision %X\n", ret & 0xF); - /* Tell the I2C layer a new client has arrived */ - - ret = i2c_attach_client(i2c_client); - if (ret) { - printk(KERN_ERR "cs4270: could not attach codec, " - "I2C address %x, error code %i\n", addr, ret); - goto error; - } - codec->control_data = i2c_client; codec->read = cs4270_read_reg_cache; codec->write = cs4270_i2c_write; @@ -648,6 +605,8 @@ static int cs4270_i2c_probe(struct i2c_adapter *adapter, int addr, int kind) goto error; } + i2c_set_clientdata(i2c_client, codec); + return 0; error: -- cgit v1.2.3 From 9778e9a0eafe796c2affcd1fa1fa8a3765e026e6 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Sat, 27 Sep 2008 20:30:52 +0200 Subject: ALSA: ASoC: Fix another cs4270 error path Conversion to new-style i2c driver missed the error path of the probe function. Fix it. Signed-off-by: Jean Delvare Cc: Timur Tabi Signed-off-by: Takashi Iwai --- sound/soc/codecs/cs4270.c | 7 +------ 1 file changed, 1 insertion(+), 6 deletions(-) diff --git a/sound/soc/codecs/cs4270.c b/sound/soc/codecs/cs4270.c index 82d94f00aa45..d68650de39bc 100644 --- a/sound/soc/codecs/cs4270.c +++ b/sound/soc/codecs/cs4270.c @@ -610,17 +610,12 @@ static int cs4270_i2c_probe(struct i2c_client *i2c_client, return 0; error: - if (codec->control_data) { - i2c_detach_client(i2c_client); - codec->control_data = NULL; - } + codec->control_data = NULL; kfree(codec->reg_cache); codec->reg_cache = NULL; codec->reg_cache_size = 0; - kfree(i2c_client); - return ret; } -- cgit v1.2.3 From ff41efcff635717ebe032437c4d6ee22badc9960 Mon Sep 17 00:00:00 2001 From: Douglas Schilling Landgraf Date: Thu, 4 Sep 2008 11:19:27 -0300 Subject: V4L/DVB (8883): w9968cf: Fix order of usb_alloc_urb validation Fixed order of usb_alloc_urb pointer validation. Cc: Luca Risolia Signed-off-by: Douglas Schilling Landgraf Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/w9968cf.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/media/video/w9968cf.c b/drivers/media/video/w9968cf.c index 168baabe4659..11edf79f57be 100644 --- a/drivers/media/video/w9968cf.c +++ b/drivers/media/video/w9968cf.c @@ -911,7 +911,6 @@ static int w9968cf_start_transfer(struct w9968cf_device* cam) for (i = 0; i < W9968CF_URBS; i++) { urb = usb_alloc_urb(W9968CF_ISO_PACKETS, GFP_KERNEL); - cam->urb[i] = urb; if (!urb) { for (j = 0; j < i; j++) usb_free_urb(cam->urb[j]); @@ -919,6 +918,7 @@ static int w9968cf_start_transfer(struct w9968cf_device* cam) return -ENOMEM; } + cam->urb[i] = urb; urb->dev = udev; urb->context = (void*)cam; urb->pipe = usb_rcvisocpipe(udev, 1); -- cgit v1.2.3 From ff9b3e430b04e00dd2d29a26ae9438d7044a51db Mon Sep 17 00:00:00 2001 From: Douglas Schilling Landgraf Date: Thu, 4 Sep 2008 11:20:20 -0300 Subject: V4L/DVB (8884): em28xx-audio: fix memory leak Free allocated memory Signed-off-by: Douglas Schilling Landgraf Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/em28xx/em28xx-audio.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/drivers/media/video/em28xx/em28xx-audio.c b/drivers/media/video/em28xx/em28xx-audio.c index 3c006103c1eb..08cb4e7711a5 100644 --- a/drivers/media/video/em28xx/em28xx-audio.c +++ b/drivers/media/video/em28xx/em28xx-audio.c @@ -161,8 +161,14 @@ static int em28xx_init_audio_isoc(struct em28xx *dev) memset(dev->adev->transfer_buffer[i], 0x80, sb_size); urb = usb_alloc_urb(EM28XX_NUM_AUDIO_PACKETS, GFP_ATOMIC); - if (!urb) + if (!urb) { + em28xx_errdev("usb_alloc_urb failed!\n"); + for (j = 0; j < i; j++) { + usb_free_urb(dev->adev->urb[j]); + kfree(dev->adev->transfer_buffer[j]); + } return -ENOMEM; + } urb->dev = dev->udev; urb->context = dev; -- cgit v1.2.3 From beeb82becc5cdd88766b4ec21f13952e2af03324 Mon Sep 17 00:00:00 2001 From: Douglas Schilling Landgraf Date: Thu, 4 Sep 2008 11:21:03 -0300 Subject: V4L/DVB (8885): cpia2_usb: fix memory leak Free allocated memory Signed-off-by: Douglas Schilling Landgraf Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/cpia2/cpia2_usb.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/media/video/cpia2/cpia2_usb.c b/drivers/media/video/cpia2/cpia2_usb.c index a4574740350d..a8a199047cbd 100644 --- a/drivers/media/video/cpia2/cpia2_usb.c +++ b/drivers/media/video/cpia2/cpia2_usb.c @@ -632,7 +632,7 @@ int cpia2_usb_transfer_cmd(struct camera_data *cam, static int submit_urbs(struct camera_data *cam) { struct urb *urb; - int fx, err, i; + int fx, err, i, j; for(i=0; isbuf[i].data) @@ -657,6 +657,9 @@ static int submit_urbs(struct camera_data *cam) } urb = usb_alloc_urb(FRAMES_PER_DESC, GFP_KERNEL); if (!urb) { + ERR("%s: usb_alloc_urb error!\n", __func__); + for (j = 0; j < i; j++) + usb_free_urb(cam->sbuf[j].urb); return -ENOMEM; } -- cgit v1.2.3 From dc2b80c191a67de8191f6323d532132fb257e402 Mon Sep 17 00:00:00 2001 From: Douglas Schilling Landgraf Date: Thu, 4 Sep 2008 11:21:58 -0300 Subject: V4L/DVB (8886): ov511: fix memory leak Free allocated memory Cc: Luca Risolia Signed-off-by: Douglas Schilling Landgraf Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/ov511.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/media/video/ov511.c b/drivers/media/video/ov511.c index 3d3c48db45d9..2576ded2b9c5 100644 --- a/drivers/media/video/ov511.c +++ b/drivers/media/video/ov511.c @@ -3591,7 +3591,7 @@ static int ov51x_init_isoc(struct usb_ov511 *ov) { struct urb *urb; - int fx, err, n, size; + int fx, err, n, i, size; PDEBUG(3, "*** Initializing capture ***"); @@ -3662,6 +3662,8 @@ ov51x_init_isoc(struct usb_ov511 *ov) urb = usb_alloc_urb(FRAMES_PER_DESC, GFP_KERNEL); if (!urb) { err("init isoc: usb_alloc_urb ret. NULL"); + for (i = 0; i < n; i++) + usb_free_urb(ov->sbuf[i].urb); return -ENOMEM; } ov->sbuf[n].urb = urb; -- cgit v1.2.3 From adf8c021d527b9c0247070513a8fa8cfd50668ed Mon Sep 17 00:00:00 2001 From: Douglas Schilling Landgraf Date: Thu, 4 Sep 2008 11:23:06 -0300 Subject: V4L/DVB (8887): gspca: fix memory leak Free allocated memory Cc: Jean-Francois Moine Cc: Hans de Goede Signed-off-by: Douglas Schilling Landgraf Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/gspca/gspca.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/media/video/gspca/gspca.c b/drivers/media/video/gspca/gspca.c index 7be69284da03..ed8935da58e0 100644 --- a/drivers/media/video/gspca/gspca.c +++ b/drivers/media/video/gspca/gspca.c @@ -459,6 +459,8 @@ static int create_urbs(struct gspca_dev *gspca_dev, urb = usb_alloc_urb(npkt, GFP_KERNEL); if (!urb) { err("usb_alloc_urb failed"); + for (i = 0; i < n; i++) + usb_free_urb(gspca_dev->urb[i]); return -ENOMEM; } urb->transfer_buffer = usb_buffer_alloc(gspca_dev->dev, -- cgit v1.2.3 From b675c0526e3d07742cbd62a22256a731ea6d5176 Mon Sep 17 00:00:00 2001 From: Mike Isely Date: Sat, 30 Aug 2008 15:08:28 -0300 Subject: V4L/DVB (8892): pvrusb2: Handle USB ID 2040:2950 same as 2040:2900 The device 2040:2950 is a really old variant of the PVR USB2 hardware. I have just learned of its existence. For the purposes of the pvrusb2 driver, it is functionally identical to the well known 29xxx series (2040:2900). Amazing that this went undetected for 3+ years. Signed-off-by: Mike Isely Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/pvrusb2/pvrusb2-devattr.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/media/video/pvrusb2/pvrusb2-devattr.c b/drivers/media/video/pvrusb2/pvrusb2-devattr.c index 88e175168438..cbe2a3417851 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-devattr.c +++ b/drivers/media/video/pvrusb2/pvrusb2-devattr.c @@ -489,6 +489,8 @@ static const struct pvr2_device_desc pvr2_device_751xx = { struct usb_device_id pvr2_device_table[] = { { USB_DEVICE(0x2040, 0x2900), .driver_info = (kernel_ulong_t)&pvr2_device_29xxx}, + { USB_DEVICE(0x2040, 0x2950), /* Logically identical to 2900 */ + .driver_info = (kernel_ulong_t)&pvr2_device_29xxx}, { USB_DEVICE(0x2040, 0x2400), .driver_info = (kernel_ulong_t)&pvr2_device_24xxx}, { USB_DEVICE(0x1164, 0x0622), -- cgit v1.2.3 From 135aedc38e812b922aa56096f36a3d72ffbcf2fb Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Tue, 2 Sep 2008 19:00:21 -0300 Subject: V4L/DVB (8904): cx88: add missing unlock_kernel sparse found an unbalanced BKL usage. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/cx88/cx88-blackbird.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/media/video/cx88/cx88-blackbird.c b/drivers/media/video/cx88/cx88-blackbird.c index 9a1374a38ec7..6b922066a660 100644 --- a/drivers/media/video/cx88/cx88-blackbird.c +++ b/drivers/media/video/cx88/cx88-blackbird.c @@ -1070,6 +1070,7 @@ static int mpeg_open(struct inode *inode, struct file *file) err = drv->request_acquire(drv); if(err != 0) { dprintk(1,"%s: Unable to acquire hardware, %d\n", __func__, err); + unlock_kernel(); return err; } } -- cgit v1.2.3 From 92762abc3dfb10c9cb41a12271b8c7513a4fce20 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Tue, 2 Sep 2008 19:02:32 -0300 Subject: V4L/DVB (8905): ov511: fix exposure sysfs attribute bug Exposure was always 0. Thanks to sparse for finding this. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/ov511.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/media/video/ov511.c b/drivers/media/video/ov511.c index 2576ded2b9c5..c6852402c5e9 100644 --- a/drivers/media/video/ov511.c +++ b/drivers/media/video/ov511.c @@ -5653,7 +5653,7 @@ static ssize_t show_exposure(struct device *cd, if (!ov->dev) return -ENODEV; sensor_get_exposure(ov, &exp); - return sprintf(buf, "%d\n", exp >> 8); + return sprintf(buf, "%d\n", exp); } static DEVICE_ATTR(exposure, S_IRUGO, show_exposure, NULL); -- cgit v1.2.3 From 40f17a7981f1d8baf0ad13233e5e7632754d931a Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Thu, 4 Sep 2008 03:57:01 -0300 Subject: V4L/DVB (8909): gspca: PAC 7302 webcam 093a:262a added. Signed-off-by: Hans de Goede Signed-off-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab --- Documentation/video4linux/gspca.txt | 1 + drivers/media/video/gspca/pac7311.c | 1 + 2 files changed, 2 insertions(+) diff --git a/Documentation/video4linux/gspca.txt b/Documentation/video4linux/gspca.txt index 0f03900c48fb..9a3e4d797fa8 100644 --- a/Documentation/video4linux/gspca.txt +++ b/Documentation/video4linux/gspca.txt @@ -190,6 +190,7 @@ pac7311 093a:260f SnakeCam pac7311 093a:2621 PAC731x pac7311 093a:2624 PAC7302 pac7311 093a:2626 Labtec 2200 +pac7311 093a:262a Webcam 300k zc3xx 0ac8:0302 Z-star Vimicro zc0302 vc032x 0ac8:0321 Vimicro generic vc0321 vc032x 0ac8:0323 Vimicro Vc0323 diff --git a/drivers/media/video/gspca/pac7311.c b/drivers/media/video/gspca/pac7311.c index d4be51843286..ba865b7f1ed8 100644 --- a/drivers/media/video/gspca/pac7311.c +++ b/drivers/media/video/gspca/pac7311.c @@ -1063,6 +1063,7 @@ static __devinitdata struct usb_device_id device_table[] = { {USB_DEVICE(0x093a, 0x2621), .driver_info = SENSOR_PAC7302}, {USB_DEVICE(0x093a, 0x2624), .driver_info = SENSOR_PAC7302}, {USB_DEVICE(0x093a, 0x2626), .driver_info = SENSOR_PAC7302}, + {USB_DEVICE(0x093a, 0x262a), .driver_info = SENSOR_PAC7302}, {} }; MODULE_DEVICE_TABLE(usb, device_table); -- cgit v1.2.3 From d0185c0882d76b8126d4a099c7ac82b3b216d103 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Mon, 29 Sep 2008 07:42:57 -0700 Subject: Fix NULL pointer dereference in proc_sys_compare The VFS interface for the 'd_compare()' is a bit special (read: 'odd'), because it really just essentially replaces a memcmp(). The filesystem is supposed to just compare the two names with whatever case-independent or other function. And when I say 'is supposed to', I obviously mean that 'procfs does odd things, and actually looks at the dentry that we don't even pass down, rather than just the name'. Which results in problems, because we actually call d_compare before we have even verified that the dentry is still hashed at all. And that causes a problm since the inode that procfs looks at may have been free'd and the d_inode pointer is NULL. procfs just assumes that all dentries are positive, since procfs itself never generates a negative one. But memory pressure will still result in the dentry getting torn down, and as it is removed by RCU, it still remains visible on some lists - and to d_compare. If the filesystem just did a name comparison, we wouldn't care. And we could just fix procfs to know about negative dentries too. But rather than have the low-level filesystems know about internal VFS details, just move the check for a unhashed dentry up a bit, so that we will only call d_compare on dentries that are still active. The actual oops this caused didn't look like a NULL pointer dereference because procfs did a 'container_of(inode, struct proc_inode, vfs_inode)' to get at its internal proc_inode information from the inode pointer, and accessed a field below the inode. So the oops would look something like BUG: unable to handle kernel paging request at fffffffffffffff0 IP: [] proc_sys_compare+0x36/0x50 and was seen on both x86-64 (Alexey Dobriyan and Hugh Dickins) and ppc64 (Hugh Dickins). Reported-by: Alexey Dobriyan Acked-by: Hugh Dickins Cc: Al Viro Reviewed-by: "Eric W. Biederman" Signed-of-by: Linus Torvalds --- fs/dcache.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) diff --git a/fs/dcache.c b/fs/dcache.c index 80e93956aced..e7a1a99b7464 100644 --- a/fs/dcache.c +++ b/fs/dcache.c @@ -1395,6 +1395,10 @@ struct dentry * __d_lookup(struct dentry * parent, struct qstr * name) if (dentry->d_parent != parent) goto next; + /* non-existing due to RCU? */ + if (d_unhashed(dentry)) + goto next; + /* * It is safe to compare names since d_move() cannot * change the qstr (protected by d_lock). @@ -1410,10 +1414,8 @@ struct dentry * __d_lookup(struct dentry * parent, struct qstr * name) goto next; } - if (!d_unhashed(dentry)) { - atomic_inc(&dentry->d_count); - found = dentry; - } + atomic_inc(&dentry->d_count); + found = dentry; spin_unlock(&dentry->d_lock); break; next: -- cgit v1.2.3 From 204c96f609045a8ce84d1dca3e758ee9b0b2a95c Mon Sep 17 00:00:00 2001 From: "zippel@linux-m68k.org" Date: Mon, 29 Sep 2008 05:27:10 +0200 Subject: kconfig: fix silentoldconfig Recent changes to oldconfig have mixed up the silentoldconfig handling, so this fixes that by clearly separating that special mode, e.g. KCONFIG_NOSILENTUPDATE is only relevant here, the .config is written as needed. This will also properly close Bug 11230. Signed-off-by: Roman Zippel Signed-off-by: Linus Torvalds --- scripts/kconfig/conf.c | 123 +++++++++++++++++++++++-------------------------- 1 file changed, 57 insertions(+), 66 deletions(-) diff --git a/scripts/kconfig/conf.c b/scripts/kconfig/conf.c index 36b5eedcdc75..3e1057f885c6 100644 --- a/scripts/kconfig/conf.c +++ b/scripts/kconfig/conf.c @@ -32,6 +32,7 @@ char *defconfig_file; static int indent = 1; static int valid_stdin = 1; +static int sync_kconfig; static int conf_cnt; static char line[128]; static struct menu *rootEntry; @@ -65,7 +66,7 @@ static void strip(char *str) static void check_stdin(void) { - if (!valid_stdin && input_mode == ask_silent) { + if (!valid_stdin) { printf(_("aborted!\n\n")); printf(_("Console input/output is redirected. ")); printf(_("Run 'make oldconfig' to update configuration.\n\n")); @@ -427,43 +428,6 @@ static void check_conf(struct menu *menu) check_conf(child); } -static void conf_do_update(void) -{ - /* Update until a loop caused no more changes */ - do { - conf_cnt = 0; - check_conf(&rootmenu); - } while (conf_cnt); -} - -static int conf_silent_update(void) -{ - const char *name; - - if (conf_get_changed()) { - name = getenv("KCONFIG_NOSILENTUPDATE"); - if (name && *name) { - fprintf(stderr, - _("\n*** Kernel configuration requires explicit update.\n\n")); - return 1; - } - conf_do_update(); - } - return 0; -} - -static int conf_update(void) -{ - rootEntry = &rootmenu; - conf(&rootmenu); - if (input_mode == ask_all) { - input_mode = ask_silent; - valid_stdin = 1; - } - conf_do_update(); - return 0; -} - int main(int ac, char **av) { int opt; @@ -477,11 +441,11 @@ int main(int ac, char **av) while ((opt = getopt(ac, av, "osdD:nmyrh")) != -1) { switch (opt) { case 'o': - input_mode = ask_new; + input_mode = ask_silent; break; case 's': input_mode = ask_silent; - valid_stdin = isatty(0) && isatty(1) && isatty(2); + sync_kconfig = 1; break; case 'd': input_mode = set_default; @@ -519,6 +483,19 @@ int main(int ac, char **av) name = av[optind]; conf_parse(name); //zconfdump(stdout); + if (sync_kconfig) { + if (stat(".config", &tmpstat)) { + fprintf(stderr, _("***\n" + "*** You have not yet configured your kernel!\n" + "*** (missing kernel .config file)\n" + "***\n" + "*** Please run some configurator (e.g. \"make oldconfig\" or\n" + "*** \"make menuconfig\" or \"make xconfig\").\n" + "***\n")); + exit(1); + } + } + switch (input_mode) { case set_default: if (!defconfig_file) @@ -531,16 +508,6 @@ int main(int ac, char **av) } break; case ask_silent: - if (stat(".config", &tmpstat)) { - printf(_("***\n" - "*** You have not yet configured your kernel!\n" - "*** (missing kernel .config file)\n" - "***\n" - "*** Please run some configurator (e.g. \"make oldconfig\" or\n" - "*** \"make menuconfig\" or \"make xconfig\").\n" - "***\n")); - exit(1); - } case ask_all: case ask_new: conf_read(NULL); @@ -569,6 +536,19 @@ int main(int ac, char **av) default: break; } + + if (sync_kconfig) { + if (conf_get_changed()) { + name = getenv("KCONFIG_NOSILENTUPDATE"); + if (name && *name) { + fprintf(stderr, + _("\n*** Kernel configuration requires explicit update.\n\n")); + return 1; + } + } + valid_stdin = isatty(0) && isatty(1) && isatty(2); + } + switch (input_mode) { case set_no: conf_set_all_new_symbols(def_no); @@ -585,27 +565,38 @@ int main(int ac, char **av) case set_default: conf_set_all_new_symbols(def_default); break; - case ask_silent: case ask_new: - if (conf_silent_update()) - exit(1); - break; case ask_all: - if (conf_update()) - exit(1); + rootEntry = &rootmenu; + conf(&rootmenu); + input_mode = ask_silent; + /* fall through */ + case ask_silent: + /* Update until a loop caused no more changes */ + do { + conf_cnt = 0; + check_conf(&rootmenu); + } while (conf_cnt); break; } - if (conf_write(NULL)) { - fprintf(stderr, _("\n*** Error during writing of the kernel configuration.\n\n")); - exit(1); - } - /* ask_silent is used during the build so we shall update autoconf. - * All other commands are only used to generate a config. - */ - if (input_mode == ask_silent && conf_write_autoconf()) { - fprintf(stderr, _("\n*** Error during writing of the kernel configuration.\n\n")); - return 1; + if (sync_kconfig) { + /* silentoldconfig is used during the build so we shall update autoconf. + * All other commands are only used to generate a config. + */ + if (conf_get_changed() && conf_write(NULL)) { + fprintf(stderr, _("\n*** Error during writing of the kernel configuration.\n\n")); + exit(1); + } + if (conf_write_autoconf()) { + fprintf(stderr, _("\n*** Error during update of the kernel configuration.\n\n")); + return 1; + } + } else { + if (conf_write(NULL)) { + fprintf(stderr, _("\n*** Error during writing of the kernel configuration.\n\n")); + exit(1); + } } return 0; } -- cgit v1.2.3 From 661b0680f736e628a6da1cc030c201646587d658 Mon Sep 17 00:00:00 2001 From: "zippel@linux-m68k.org" Date: Mon, 29 Sep 2008 05:27:11 +0200 Subject: kconfig: readd lost change count Commit f072181e6403b0fe2e2aa800a005497b748fd284 ("kconfig: drop the ""trying to assign nonexistent symbol" warning") simply dropped the warnings, but it does a little more than that, it also marks the current .config as needed saving, so add this back. Signed-off-by: Roman Zippel Signed-off-by: Linus Torvalds --- scripts/kconfig/confdata.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/scripts/kconfig/confdata.c b/scripts/kconfig/confdata.c index df6a188b9930..b91cf241a539 100644 --- a/scripts/kconfig/confdata.c +++ b/scripts/kconfig/confdata.c @@ -222,8 +222,10 @@ load: continue; if (def == S_DEF_USER) { sym = sym_find(line + 9); - if (!sym) + if (!sym) { + sym_add_change_count(1); break; + } } else { sym = sym_lookup(line + 9, 0); if (sym->type == S_UNKNOWN) @@ -259,8 +261,10 @@ load: } if (def == S_DEF_USER) { sym = sym_find(line + 7); - if (!sym) + if (!sym) { + sym_add_change_count(1); break; + } } else { sym = sym_lookup(line + 7, 0); if (sym->type == S_UNKNOWN) -- cgit v1.2.3 From 7659e349672bb0d378ef8d7d62bae4c53d2bdd18 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Mon, 29 Sep 2008 14:06:45 +0200 Subject: hrtimer: migrate pending list on cpu offline Impact: hrtimers which are on the pending list are not migrated at cpu offline and can be stale forever Add the pending list migration when CONFIG_HIGH_RES_TIMERS is enabled Signed-off-by: Thomas Gleixner --- kernel/hrtimer.c | 34 +++++++++++++++++++++++++++++++++- 1 file changed, 33 insertions(+), 1 deletion(-) diff --git a/kernel/hrtimer.c b/kernel/hrtimer.c index b8e4dce80a74..580bc66ae136 100644 --- a/kernel/hrtimer.c +++ b/kernel/hrtimer.c @@ -1610,10 +1610,36 @@ static void migrate_hrtimer_list(struct hrtimer_clock_base *old_base, } } +#ifdef CONFIG_HIGH_RES_TIMERS +static int migrate_hrtimer_pending(struct hrtimer_cpu_base *old_base, + struct hrtimer_cpu_base *new_base) +{ + struct hrtimer *timer; + int raise = 0; + + while (!list_empty(&old_base->cb_pending)) { + timer = list_entry(old_base->cb_pending.next, + struct hrtimer, cb_entry); + + __remove_hrtimer(timer, timer->base, HRTIMER_STATE_PENDING, 0); + timer->base = &new_base->clock_base[timer->base->index]; + list_add_tail(&timer->cb_entry, &new_base->cb_pending); + raise = 1; + } + return raise; +} +#else +static int migrate_hrtimer_pending(struct hrtimer_cpu_base *old_base, + struct hrtimer_cpu_base *new_base) +{ + return 0; +} +#endif + static void migrate_hrtimers(int cpu) { struct hrtimer_cpu_base *old_base, *new_base; - int i; + int i, raise = 0; BUG_ON(cpu_online(cpu)); old_base = &per_cpu(hrtimer_bases, cpu); @@ -1630,10 +1656,16 @@ static void migrate_hrtimers(int cpu) &new_base->clock_base[i]); } + if (migrate_hrtimer_pending(old_base, new_base)) + raise = 1; + spin_unlock(&old_base->lock); spin_unlock(&new_base->lock); local_irq_enable(); put_cpu_var(hrtimer_bases); + + if (raise) + hrtimer_raise_softirq(); } #endif /* CONFIG_HOTPLUG_CPU */ -- cgit v1.2.3 From 41e1022eae71707f1ce6801a746f70b1e57b7567 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Mon, 29 Sep 2008 14:09:39 +0200 Subject: hrtimer: fix migration of CB_IRQSAFE_NO_SOFTIRQ hrtimers Impact: Stale timers after a CPU went offline. commit 37bb6cb4097e29ffee970065b74499cbf10603a3 hrtimer: unlock hrtimer_wakeup changed the hrtimer sleeper callback mode to CB_IRQSAFE_NO_SOFTIRQ due to locking problems. A result of this change is that when enqueue is called for an already expired hrtimer the callback function is not longer called directly from the enqueue code. The normal callers have been fixed in the code, but the migration code which moves hrtimers from a dead CPU to a live CPU was not made aware of this. This can be fixed by checking the timer state after the call to enqueue in the migration code. Signed-off-by: Thomas Gleixner --- kernel/hrtimer.c | 28 +++++++++++++++++++++++++--- 1 file changed, 25 insertions(+), 3 deletions(-) diff --git a/kernel/hrtimer.c b/kernel/hrtimer.c index 580bc66ae136..ac2f6d6d4868 100644 --- a/kernel/hrtimer.c +++ b/kernel/hrtimer.c @@ -1591,11 +1591,12 @@ static void __cpuinit init_hrtimers_cpu(int cpu) #ifdef CONFIG_HOTPLUG_CPU -static void migrate_hrtimer_list(struct hrtimer_clock_base *old_base, +static int migrate_hrtimer_list(struct hrtimer_clock_base *old_base, struct hrtimer_clock_base *new_base) { struct hrtimer *timer; struct rb_node *node; + int raise = 0; while ((node = rb_first(&old_base->active))) { timer = rb_entry(node, struct hrtimer, node); @@ -1607,7 +1608,27 @@ static void migrate_hrtimer_list(struct hrtimer_clock_base *old_base, * Enqueue the timer. Allow reprogramming of the event device */ enqueue_hrtimer(timer, new_base, 1); + +#ifdef CONFIG_HIGH_RES_TIMERS + /* + * Happens with high res enabled when the timer was + * already expired and the callback mode is + * HRTIMER_CB_IRQSAFE_NO_SOFTIRQ + * (hrtimer_sleeper). The enqueue code does not move + * them to the soft irq pending list for + * performance/latency reasons, but in the migration + * state, we need to do that otherwise we end up with + * a stale timer. + */ + if (timer->state == HRTIMER_STATE_INACTIVE) { + timer->state = HRTIMER_STATE_PENDING; + list_add_tail(&timer->cb_entry, + &new_base->cpu_base->cb_pending); + raise = 1; + } +#endif } + return raise; } #ifdef CONFIG_HIGH_RES_TIMERS @@ -1652,8 +1673,9 @@ static void migrate_hrtimers(int cpu) spin_lock_nested(&old_base->lock, SINGLE_DEPTH_NESTING); for (i = 0; i < HRTIMER_MAX_CLOCK_BASES; i++) { - migrate_hrtimer_list(&old_base->clock_base[i], - &new_base->clock_base[i]); + if (migrate_hrtimer_list(&old_base->clock_base[i], + &new_base->clock_base[i])) + raise = 1; } if (migrate_hrtimer_pending(old_base, new_base)) -- cgit v1.2.3 From b00c1a99e7758f794923c61e5cd55268d61c9469 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Mon, 29 Sep 2008 15:44:46 +0200 Subject: hrtimer: mark migration state Impact: during migration active hrtimers can be seen as inactive The migration code removes the hrtimers from the queues of the dead CPU and sets the state temporary to INACTIVE. The enqueue code sets it to ACTIVE/PENDING again. Prevent that the wrong state can be seen by using a separate migration state bit. Signed-off-by: Thomas Gleixner --- include/linux/hrtimer.h | 4 +++- kernel/hrtimer.c | 12 ++++++++++-- 2 files changed, 13 insertions(+), 3 deletions(-) diff --git a/include/linux/hrtimer.h b/include/linux/hrtimer.h index 6d93dce61cbb..bdd88df1b4e5 100644 --- a/include/linux/hrtimer.h +++ b/include/linux/hrtimer.h @@ -67,9 +67,10 @@ enum hrtimer_cb_mode { * 0x02 callback function running * 0x04 callback pending (high resolution mode) * - * Special case: + * Special cases: * 0x03 callback function running and enqueued * (was requeued on another CPU) + * 0x09 timer was migrated on CPU hotunplug * The "callback function running and enqueued" status is only possible on * SMP. It happens for example when a posix timer expired and the callback * queued a signal. Between dropping the lock which protects the posix timer @@ -87,6 +88,7 @@ enum hrtimer_cb_mode { #define HRTIMER_STATE_ENQUEUED 0x01 #define HRTIMER_STATE_CALLBACK 0x02 #define HRTIMER_STATE_PENDING 0x04 +#define HRTIMER_STATE_MIGRATE 0x08 /** * struct hrtimer - the basic hrtimer structure diff --git a/kernel/hrtimer.c b/kernel/hrtimer.c index ac2f6d6d4868..ace723dd1e52 100644 --- a/kernel/hrtimer.c +++ b/kernel/hrtimer.c @@ -1602,7 +1602,13 @@ static int migrate_hrtimer_list(struct hrtimer_clock_base *old_base, timer = rb_entry(node, struct hrtimer, node); BUG_ON(hrtimer_callback_running(timer)); debug_hrtimer_deactivate(timer); - __remove_hrtimer(timer, old_base, HRTIMER_STATE_INACTIVE, 0); + + /* + * Mark it as STATE_MIGRATE not INACTIVE otherwise the + * timer could be seen as !active and just vanish away + * under us on another CPU + */ + __remove_hrtimer(timer, old_base, HRTIMER_STATE_MIGRATE, 0); timer->base = new_base; /* * Enqueue the timer. Allow reprogramming of the event device @@ -1620,13 +1626,15 @@ static int migrate_hrtimer_list(struct hrtimer_clock_base *old_base, * state, we need to do that otherwise we end up with * a stale timer. */ - if (timer->state == HRTIMER_STATE_INACTIVE) { + if (timer->state == HRTIMER_STATE_MIGRATE) { timer->state = HRTIMER_STATE_PENDING; list_add_tail(&timer->cb_entry, &new_base->cpu_base->cb_pending); raise = 1; } #endif + /* Clear the migration state bit */ + timer->state &= ~HRTIMER_STATE_MIGRATE; } return raise; } -- cgit v1.2.3 From ccc7dadf736639da86f3e0c86832c11a66fc8221 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Mon, 29 Sep 2008 15:47:42 +0200 Subject: hrtimer: prevent migration of per CPU hrtimers Impact: per CPU hrtimers can be migrated from a dead CPU The hrtimer code has no knowledge about per CPU timers, but we need to prevent the migration of such timers and warn when such a timer is active at migration time. Explicitely mark the timers as per CPU and use a more understandable mode descriptor for the interrupts safe unlocked callback mode, which is used by hrtimer_sleeper and the scheduler code. Signed-off-by: Thomas Gleixner --- include/linux/hrtimer.h | 14 +++++++++++--- kernel/hrtimer.c | 37 +++++++++++++++++++++++++------------ kernel/sched.c | 4 ++-- kernel/time/tick-sched.c | 2 +- kernel/trace/trace_sysprof.c | 2 +- 5 files changed, 40 insertions(+), 19 deletions(-) diff --git a/include/linux/hrtimer.h b/include/linux/hrtimer.h index bdd88df1b4e5..2f245fe63bda 100644 --- a/include/linux/hrtimer.h +++ b/include/linux/hrtimer.h @@ -47,14 +47,22 @@ enum hrtimer_restart { * HRTIMER_CB_IRQSAFE: Callback may run in hardirq context * HRTIMER_CB_IRQSAFE_NO_RESTART: Callback may run in hardirq context and * does not restart the timer - * HRTIMER_CB_IRQSAFE_NO_SOFTIRQ: Callback must run in hardirq context - * Special mode for tick emultation + * HRTIMER_CB_IRQSAFE_PERCPU: Callback must run in hardirq context + * Special mode for tick emulation and + * scheduler timer. Such timers are per + * cpu and not allowed to be migrated on + * cpu unplug. + * HRTIMER_CB_IRQSAFE_UNLOCKED: Callback should run in hardirq context + * with timer->base lock unlocked + * used for timers which call wakeup to + * avoid lock order problems with rq->lock */ enum hrtimer_cb_mode { HRTIMER_CB_SOFTIRQ, HRTIMER_CB_IRQSAFE, HRTIMER_CB_IRQSAFE_NO_RESTART, - HRTIMER_CB_IRQSAFE_NO_SOFTIRQ, + HRTIMER_CB_IRQSAFE_PERCPU, + HRTIMER_CB_IRQSAFE_UNLOCKED, }; /* diff --git a/kernel/hrtimer.c b/kernel/hrtimer.c index ace723dd1e52..cdec83e722fa 100644 --- a/kernel/hrtimer.c +++ b/kernel/hrtimer.c @@ -672,13 +672,14 @@ static inline int hrtimer_enqueue_reprogram(struct hrtimer *timer, */ BUG_ON(timer->function(timer) != HRTIMER_NORESTART); return 1; - case HRTIMER_CB_IRQSAFE_NO_SOFTIRQ: + case HRTIMER_CB_IRQSAFE_PERCPU: + case HRTIMER_CB_IRQSAFE_UNLOCKED: /* * This is solely for the sched tick emulation with * dynamic tick support to ensure that we do not * restart the tick right on the edge and end up with * the tick timer in the softirq ! The calling site - * takes care of this. + * takes care of this. Also used for hrtimer sleeper ! */ debug_hrtimer_deactivate(timer); return 1; @@ -1245,7 +1246,8 @@ static void __run_hrtimer(struct hrtimer *timer) timer_stats_account_hrtimer(timer); fn = timer->function; - if (timer->cb_mode == HRTIMER_CB_IRQSAFE_NO_SOFTIRQ) { + if (timer->cb_mode == HRTIMER_CB_IRQSAFE_PERCPU || + timer->cb_mode == HRTIMER_CB_IRQSAFE_UNLOCKED) { /* * Used for scheduler timers, avoid lock inversion with * rq->lock and tasklist_lock. @@ -1452,7 +1454,7 @@ void hrtimer_init_sleeper(struct hrtimer_sleeper *sl, struct task_struct *task) sl->timer.function = hrtimer_wakeup; sl->task = task; #ifdef CONFIG_HIGH_RES_TIMERS - sl->timer.cb_mode = HRTIMER_CB_IRQSAFE_NO_SOFTIRQ; + sl->timer.cb_mode = HRTIMER_CB_IRQSAFE_UNLOCKED; #endif } @@ -1592,7 +1594,7 @@ static void __cpuinit init_hrtimers_cpu(int cpu) #ifdef CONFIG_HOTPLUG_CPU static int migrate_hrtimer_list(struct hrtimer_clock_base *old_base, - struct hrtimer_clock_base *new_base) + struct hrtimer_clock_base *new_base, int dcpu) { struct hrtimer *timer; struct rb_node *node; @@ -1603,6 +1605,18 @@ static int migrate_hrtimer_list(struct hrtimer_clock_base *old_base, BUG_ON(hrtimer_callback_running(timer)); debug_hrtimer_deactivate(timer); + /* + * Should not happen. Per CPU timers should be + * canceled _before_ the migration code is called + */ + if (timer->cb_mode == HRTIMER_CB_IRQSAFE_PERCPU) { + __remove_hrtimer(timer, old_base, + HRTIMER_STATE_INACTIVE, 0); + WARN(1, "hrtimer (%p %p)active but cpu %d dead\n", + timer, timer->function, dcpu); + continue; + } + /* * Mark it as STATE_MIGRATE not INACTIVE otherwise the * timer could be seen as !active and just vanish away @@ -1619,12 +1633,11 @@ static int migrate_hrtimer_list(struct hrtimer_clock_base *old_base, /* * Happens with high res enabled when the timer was * already expired and the callback mode is - * HRTIMER_CB_IRQSAFE_NO_SOFTIRQ - * (hrtimer_sleeper). The enqueue code does not move - * them to the soft irq pending list for - * performance/latency reasons, but in the migration - * state, we need to do that otherwise we end up with - * a stale timer. + * HRTIMER_CB_IRQSAFE_UNLOCKED (hrtimer_sleeper). The + * enqueue code does not move them to the soft irq + * pending list for performance/latency reasons, but + * in the migration state, we need to do that + * otherwise we end up with a stale timer. */ if (timer->state == HRTIMER_STATE_MIGRATE) { timer->state = HRTIMER_STATE_PENDING; @@ -1682,7 +1695,7 @@ static void migrate_hrtimers(int cpu) for (i = 0; i < HRTIMER_MAX_CLOCK_BASES; i++) { if (migrate_hrtimer_list(&old_base->clock_base[i], - &new_base->clock_base[i])) + &new_base->clock_base[i], cpu)) raise = 1; } diff --git a/kernel/sched.c b/kernel/sched.c index 13dd2db9fb2d..ad1962dc0aa2 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -201,7 +201,7 @@ void init_rt_bandwidth(struct rt_bandwidth *rt_b, u64 period, u64 runtime) hrtimer_init(&rt_b->rt_period_timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL); rt_b->rt_period_timer.function = sched_rt_period_timer; - rt_b->rt_period_timer.cb_mode = HRTIMER_CB_IRQSAFE_NO_SOFTIRQ; + rt_b->rt_period_timer.cb_mode = HRTIMER_CB_IRQSAFE_UNLOCKED; } static void start_rt_bandwidth(struct rt_bandwidth *rt_b) @@ -1119,7 +1119,7 @@ static void init_rq_hrtick(struct rq *rq) hrtimer_init(&rq->hrtick_timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL); rq->hrtick_timer.function = hrtick; - rq->hrtick_timer.cb_mode = HRTIMER_CB_IRQSAFE_NO_SOFTIRQ; + rq->hrtick_timer.cb_mode = HRTIMER_CB_IRQSAFE_PERCPU; } #else static inline void hrtick_clear(struct rq *rq) diff --git a/kernel/time/tick-sched.c b/kernel/time/tick-sched.c index 39019b3f7621..cb02324bdb88 100644 --- a/kernel/time/tick-sched.c +++ b/kernel/time/tick-sched.c @@ -625,7 +625,7 @@ void tick_setup_sched_timer(void) */ hrtimer_init(&ts->sched_timer, CLOCK_MONOTONIC, HRTIMER_MODE_ABS); ts->sched_timer.function = tick_sched_timer; - ts->sched_timer.cb_mode = HRTIMER_CB_IRQSAFE_NO_SOFTIRQ; + ts->sched_timer.cb_mode = HRTIMER_CB_IRQSAFE_PERCPU; /* Get the next period (per cpu) */ ts->sched_timer.expires = tick_init_jiffy_update(); diff --git a/kernel/trace/trace_sysprof.c b/kernel/trace/trace_sysprof.c index bb948e52ce20..db58fb66a135 100644 --- a/kernel/trace/trace_sysprof.c +++ b/kernel/trace/trace_sysprof.c @@ -202,7 +202,7 @@ static void start_stack_timer(int cpu) hrtimer_init(hrtimer, CLOCK_MONOTONIC, HRTIMER_MODE_REL); hrtimer->function = stack_trace_timer_fn; - hrtimer->cb_mode = HRTIMER_CB_IRQSAFE_NO_SOFTIRQ; + hrtimer->cb_mode = HRTIMER_CB_IRQSAFE_PERCPU; hrtimer_start(hrtimer, ns_to_ktime(sample_period), HRTIMER_MODE_REL); } -- cgit v1.2.3 From 31a78f23bac0069004e69f98808b6988baccb6b6 Mon Sep 17 00:00:00 2001 From: Balbir Singh Date: Sun, 28 Sep 2008 23:09:31 +0100 Subject: mm owner: fix race between swapoff and exit There's a race between mm->owner assignment and swapoff, more easily seen when task slab poisoning is turned on. The condition occurs when try_to_unuse() runs in parallel with an exiting task. A similar race can occur with callers of get_task_mm(), such as /proc// or ptrace or page migration. CPU0 CPU1 try_to_unuse looks at mm = task0->mm increments mm->mm_users task 0 exits mm->owner needs to be updated, but no new owner is found (mm_users > 1, but no other task has task->mm = task0->mm) mm_update_next_owner() leaves mmput(mm) decrements mm->mm_users task0 freed dereferencing mm->owner fails The fix is to notify the subsystem via mm_owner_changed callback(), if no new owner is found, by specifying the new task as NULL. Jiri Slaby: mm->owner was set to NULL prior to calling cgroup_mm_owner_callbacks(), but must be set after that, so as not to pass NULL as old owner causing oops. Daisuke Nishimura: mm_update_next_owner() may set mm->owner to NULL, but mem_cgroup_from_task() and its callers need to take account of this situation to avoid oops. Hugh Dickins: Lockdep warning and hang below exec_mmap() when testing these patches. exit_mm() up_reads mmap_sem before calling mm_update_next_owner(), so exec_mmap() now needs to do the same. And with that repositioning, there's now no point in mm_need_new_owner() allowing for NULL mm. Reported-by: Hugh Dickins Signed-off-by: Balbir Singh Signed-off-by: Jiri Slaby Signed-off-by: Daisuke Nishimura Signed-off-by: Hugh Dickins Cc: KAMEZAWA Hiroyuki Cc: Paul Menage Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/exec.c | 2 +- kernel/cgroup.c | 5 +++-- kernel/exit.c | 12 ++++++++++-- mm/memcontrol.c | 17 +++++++++++++++++ 4 files changed, 31 insertions(+), 5 deletions(-) diff --git a/fs/exec.c b/fs/exec.c index 32993beecbe9..cecee501ce78 100644 --- a/fs/exec.c +++ b/fs/exec.c @@ -752,11 +752,11 @@ static int exec_mmap(struct mm_struct *mm) tsk->active_mm = mm; activate_mm(active_mm, mm); task_unlock(tsk); - mm_update_next_owner(old_mm); arch_pick_mmap_layout(mm); if (old_mm) { up_read(&old_mm->mmap_sem); BUG_ON(active_mm != old_mm); + mm_update_next_owner(old_mm); mmput(old_mm); return 0; } diff --git a/kernel/cgroup.c b/kernel/cgroup.c index 13932abde159..a0123d75ec9a 100644 --- a/kernel/cgroup.c +++ b/kernel/cgroup.c @@ -2738,14 +2738,15 @@ void cgroup_fork_callbacks(struct task_struct *child) */ void cgroup_mm_owner_callbacks(struct task_struct *old, struct task_struct *new) { - struct cgroup *oldcgrp, *newcgrp; + struct cgroup *oldcgrp, *newcgrp = NULL; if (need_mm_owner_callback) { int i; for (i = 0; i < CGROUP_SUBSYS_COUNT; i++) { struct cgroup_subsys *ss = subsys[i]; oldcgrp = task_cgroup(old, ss->subsys_id); - newcgrp = task_cgroup(new, ss->subsys_id); + if (new) + newcgrp = task_cgroup(new, ss->subsys_id); if (oldcgrp == newcgrp) continue; if (ss->mm_owner_changed) diff --git a/kernel/exit.c b/kernel/exit.c index 16395644a98f..85a83c831856 100644 --- a/kernel/exit.c +++ b/kernel/exit.c @@ -583,8 +583,6 @@ mm_need_new_owner(struct mm_struct *mm, struct task_struct *p) * If there are other users of the mm and the owner (us) is exiting * we need to find a new owner to take on the responsibility. */ - if (!mm) - return 0; if (atomic_read(&mm->mm_users) <= 1) return 0; if (mm->owner != p) @@ -627,6 +625,16 @@ retry: } while_each_thread(g, c); read_unlock(&tasklist_lock); + /* + * We found no owner yet mm_users > 1: this implies that we are + * most likely racing with swapoff (try_to_unuse()) or /proc or + * ptrace or page migration (get_task_mm()). Mark owner as NULL, + * so that subsystems can understand the callback and take action. + */ + down_write(&mm->mmap_sem); + cgroup_mm_owner_callbacks(mm->owner, NULL); + mm->owner = NULL; + up_write(&mm->mmap_sem); return; assign_new_owner: diff --git a/mm/memcontrol.c b/mm/memcontrol.c index c0500e4d3a2f..36896f3eb7f5 100644 --- a/mm/memcontrol.c +++ b/mm/memcontrol.c @@ -250,6 +250,14 @@ static struct mem_cgroup *mem_cgroup_from_cont(struct cgroup *cont) struct mem_cgroup *mem_cgroup_from_task(struct task_struct *p) { + /* + * mm_update_next_owner() may clear mm->owner to NULL + * if it races with swapoff, page migration, etc. + * So this can be called with p == NULL. + */ + if (unlikely(!p)) + return NULL; + return container_of(task_subsys_state(p, mem_cgroup_subsys_id), struct mem_cgroup, css); } @@ -549,6 +557,11 @@ static int mem_cgroup_charge_common(struct page *page, struct mm_struct *mm, if (likely(!memcg)) { rcu_read_lock(); mem = mem_cgroup_from_task(rcu_dereference(mm->owner)); + if (unlikely(!mem)) { + rcu_read_unlock(); + kmem_cache_free(page_cgroup_cache, pc); + return 0; + } /* * For every charge from the cgroup, increment reference count */ @@ -801,6 +814,10 @@ int mem_cgroup_shrink_usage(struct mm_struct *mm, gfp_t gfp_mask) rcu_read_lock(); mem = mem_cgroup_from_task(rcu_dereference(mm->owner)); + if (unlikely(!mem)) { + rcu_read_unlock(); + return 0; + } css_get(&mem->css); rcu_read_unlock(); -- cgit v1.2.3 From 94aca1dac6f6d21f4b07e4864baf7768cabcc6e7 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Mon, 29 Sep 2008 15:24:02 -0700 Subject: Linux 2.6.27-rc8 --- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Makefile b/Makefile index cab896a97296..1d03c1644ddb 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ VERSION = 2 PATCHLEVEL = 6 SUBLEVEL = 27 -EXTRAVERSION = -rc7 +EXTRAVERSION = -rc8 NAME = Rotary Wombat # *DOCUMENTATION* -- cgit v1.2.3 From c459ce8b5a7d933a3bcf6915ab17ac1e036e2ac4 Mon Sep 17 00:00:00 2001 From: Tony Luck Date: Mon, 29 Sep 2008 16:39:19 -0700 Subject: [IA64] Put the space for cpu0 per-cpu area into .data section Initial fix for making sure that we can access percpu variables in all C code (commit: 10617bbe84628eb18ab5f723d3ba35005adde143) inadvertantly allocated the memory in the "percpu" section of the vmlinux ELF executable. This confused kexec/dump. Signed-off-by: Tony Luck --- arch/ia64/include/asm/sections.h | 3 +++ arch/ia64/kernel/head.S | 9 +++++---- arch/ia64/kernel/vmlinux.lds.S | 8 +++++--- arch/ia64/mm/contig.c | 2 +- arch/ia64/mm/discontig.c | 2 +- 5 files changed, 15 insertions(+), 9 deletions(-) diff --git a/arch/ia64/include/asm/sections.h b/arch/ia64/include/asm/sections.h index f66799891036..1a873b36a4a1 100644 --- a/arch/ia64/include/asm/sections.h +++ b/arch/ia64/include/asm/sections.h @@ -11,6 +11,9 @@ #include extern char __per_cpu_start[], __per_cpu_end[], __phys_per_cpu_start[]; +#ifdef CONFIG_SMP +extern char __cpu0_per_cpu[]; +#endif extern char __start___vtop_patchlist[], __end___vtop_patchlist[]; extern char __start___rse_patchlist[], __end___rse_patchlist[]; extern char __start___mckinley_e9_bundles[], __end___mckinley_e9_bundles[]; diff --git a/arch/ia64/kernel/head.S b/arch/ia64/kernel/head.S index 8bdea8eb62e3..66e491d8baac 100644 --- a/arch/ia64/kernel/head.S +++ b/arch/ia64/kernel/head.S @@ -367,16 +367,17 @@ start_ap: ;; #else (isAP) br.few 2f - mov r20=r19 - sub r19=r19,r18 + movl r20=__cpu0_per_cpu ;; shr.u r18=r18,3 1: - ld8 r21=[r20],8;; - st8[r19]=r21,8 + ld8 r21=[r19],8;; + st8[r20]=r21,8 adds r18=-1,r18;; cmp4.lt p7,p6=0,r18 (p7) br.cond.dptk.few 1b + mov r19=r20 + ;; 2: #endif tpa r19=r19 diff --git a/arch/ia64/kernel/vmlinux.lds.S b/arch/ia64/kernel/vmlinux.lds.S index de71da811cd6..10a7d47e8510 100644 --- a/arch/ia64/kernel/vmlinux.lds.S +++ b/arch/ia64/kernel/vmlinux.lds.S @@ -215,9 +215,6 @@ SECTIONS /* Per-cpu data: */ percpu : { } :percpu . = ALIGN(PERCPU_PAGE_SIZE); -#ifdef CONFIG_SMP - . = . + PERCPU_PAGE_SIZE; /* cpu0 per-cpu space */ -#endif __phys_per_cpu_start = .; .data.percpu PERCPU_ADDR : AT(__phys_per_cpu_start - LOAD_OFFSET) { @@ -233,6 +230,11 @@ SECTIONS data : { } :data .data : AT(ADDR(.data) - LOAD_OFFSET) { +#ifdef CONFIG_SMP + . = ALIGN(PERCPU_PAGE_SIZE); + __cpu0_per_cpu = .; + . = . + PERCPU_PAGE_SIZE; /* cpu0 per-cpu space */ +#endif DATA_DATA *(.data1) *(.gnu.linkonce.d*) diff --git a/arch/ia64/mm/contig.c b/arch/ia64/mm/contig.c index e566ff43884a..0ee085efbe29 100644 --- a/arch/ia64/mm/contig.c +++ b/arch/ia64/mm/contig.c @@ -163,7 +163,7 @@ per_cpu_init (void) * get_zeroed_page(). */ if (first_time) { - void *cpu0_data = __phys_per_cpu_start - PERCPU_PAGE_SIZE; + void *cpu0_data = __cpu0_per_cpu; first_time=0; diff --git a/arch/ia64/mm/discontig.c b/arch/ia64/mm/discontig.c index 78026aabaa7f..d8c5fcd89e5b 100644 --- a/arch/ia64/mm/discontig.c +++ b/arch/ia64/mm/discontig.c @@ -144,7 +144,7 @@ static void *per_cpu_node_setup(void *cpu_data, int node) for_each_possible_early_cpu(cpu) { if (cpu == 0) { - void *cpu0_data = __phys_per_cpu_start - PERCPU_PAGE_SIZE; + void *cpu0_data = __cpu0_per_cpu; __per_cpu_offset[cpu] = (char*)cpu0_data - __per_cpu_start; } else if (node == node_cpuid[cpu].nid) { -- cgit v1.2.3 From ad611045ce5d059af84a9855b22ca3f7a99d47be Mon Sep 17 00:00:00 2001 From: David Gibson Date: Wed, 24 Sep 2008 16:39:04 +0000 Subject: powerpc: Fix PCI in Holly device tree The PCI bridge on the Holly board is incorrectly represented in the device tree. The current device tree node for the PCI bridge sits under the tsi-bridge node. That's not obviously wrong, but the PCI bridge translates some PCI spaces into CPU address ranges which were not translated by the "ranges" property in tsi-bridge node. We used to get away with this problem because the PCI bridge discovery code was also buggy, assuming incorrectly that PCI host bridge nodes were always directly under the root bus and treating the translated addresses as raw CPU addresses, rather than parent bus addresses. This has since been fixed, thus breaking Holly. This could be fixed by adding extra translations to the tsi-bridge node, but this patch instead moves the Holly PCI bridge out of the tsi-bridge node to the root bus. This makes the tsi-bridge node represent only the built-in IO devices in the bridge, with a more-or-less contiguous address range. This is the same convention used on Freescale SoC chips, where the "soc" node represents only the IMMR region, and the PCI and other bus bridges are separate nodes under the root bus. Signed-off-by: David Gibson Acked-by: Josh Boyer Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/boot/dts/holly.dts | 106 ++++++++++++++++++++-------------------- 1 file changed, 53 insertions(+), 53 deletions(-) diff --git a/arch/powerpc/boot/dts/holly.dts b/arch/powerpc/boot/dts/holly.dts index f87fe7b9ced9..c6e11ebecebb 100644 --- a/arch/powerpc/boot/dts/holly.dts +++ b/arch/powerpc/boot/dts/holly.dts @@ -133,61 +133,61 @@ reg = <0x00007400 0x00000400>; big-endian; }; + }; - pci@1000 { - device_type = "pci"; - compatible = "tsi109-pci", "tsi108-pci"; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - reg = <0x00001000 0x00001000>; - bus-range = <0x0 0x0>; - /*----------------------------------------------------+ - | PCI memory range. - | 01 denotes I/O space - | 02 denotes 32-bit memory space - +----------------------------------------------------*/ - ranges = <0x02000000 0x00000000 0x40000000 0x40000000 0x00000000 0x10000000 - 0x01000000 0x00000000 0x00000000 0x7e000000 0x00000000 0x00010000>; - clock-frequency = <133333332>; - interrupt-parent = <&MPIC>; + pci@c0001000 { + device_type = "pci"; + compatible = "tsi109-pci", "tsi108-pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <0xc0001000 0x00001000>; + bus-range = <0x0 0x0>; + /*----------------------------------------------------+ + | PCI memory range. + | 01 denotes I/O space + | 02 denotes 32-bit memory space + +----------------------------------------------------*/ + ranges = <0x02000000 0x00000000 0x40000000 0x40000000 0x00000000 0x10000000 + 0x01000000 0x00000000 0x00000000 0x7e000000 0x00000000 0x00010000>; + clock-frequency = <133333332>; + interrupt-parent = <&MPIC>; + interrupts = <0x17 0x2>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + /*----------------------------------------------------+ + | The INTA, INTB, INTC, INTD are shared. + +----------------------------------------------------*/ + interrupt-map = < + 0x800 0x0 0x0 0x1 &RT0 0x24 0x0 + 0x800 0x0 0x0 0x2 &RT0 0x25 0x0 + 0x800 0x0 0x0 0x3 &RT0 0x26 0x0 + 0x800 0x0 0x0 0x4 &RT0 0x27 0x0 + + 0x1000 0x0 0x0 0x1 &RT0 0x25 0x0 + 0x1000 0x0 0x0 0x2 &RT0 0x26 0x0 + 0x1000 0x0 0x0 0x3 &RT0 0x27 0x0 + 0x1000 0x0 0x0 0x4 &RT0 0x24 0x0 + + 0x1800 0x0 0x0 0x1 &RT0 0x26 0x0 + 0x1800 0x0 0x0 0x2 &RT0 0x27 0x0 + 0x1800 0x0 0x0 0x3 &RT0 0x24 0x0 + 0x1800 0x0 0x0 0x4 &RT0 0x25 0x0 + + 0x2000 0x0 0x0 0x1 &RT0 0x27 0x0 + 0x2000 0x0 0x0 0x2 &RT0 0x24 0x0 + 0x2000 0x0 0x0 0x3 &RT0 0x25 0x0 + 0x2000 0x0 0x0 0x4 &RT0 0x26 0x0 + >; + + RT0: router@1180 { + device_type = "pic-router"; + interrupt-controller; + big-endian; + clock-frequency = <0>; + #address-cells = <0>; + #interrupt-cells = <2>; interrupts = <0x17 0x2>; - interrupt-map-mask = <0xf800 0x0 0x0 0x7>; - /*----------------------------------------------------+ - | The INTA, INTB, INTC, INTD are shared. - +----------------------------------------------------*/ - interrupt-map = < - 0x800 0x0 0x0 0x1 &RT0 0x24 0x0 - 0x800 0x0 0x0 0x2 &RT0 0x25 0x0 - 0x800 0x0 0x0 0x3 &RT0 0x26 0x0 - 0x800 0x0 0x0 0x4 &RT0 0x27 0x0 - - 0x1000 0x0 0x0 0x1 &RT0 0x25 0x0 - 0x1000 0x0 0x0 0x2 &RT0 0x26 0x0 - 0x1000 0x0 0x0 0x3 &RT0 0x27 0x0 - 0x1000 0x0 0x0 0x4 &RT0 0x24 0x0 - - 0x1800 0x0 0x0 0x1 &RT0 0x26 0x0 - 0x1800 0x0 0x0 0x2 &RT0 0x27 0x0 - 0x1800 0x0 0x0 0x3 &RT0 0x24 0x0 - 0x1800 0x0 0x0 0x4 &RT0 0x25 0x0 - - 0x2000 0x0 0x0 0x1 &RT0 0x27 0x0 - 0x2000 0x0 0x0 0x2 &RT0 0x24 0x0 - 0x2000 0x0 0x0 0x3 &RT0 0x25 0x0 - 0x2000 0x0 0x0 0x4 &RT0 0x26 0x0 - >; - - RT0: router@1180 { - device_type = "pic-router"; - interrupt-controller; - big-endian; - clock-frequency = <0>; - #address-cells = <0>; - #interrupt-cells = <2>; - interrupts = <0x17 0x2>; - interrupt-parent = <&MPIC>; - }; + interrupt-parent = <&MPIC>; }; }; -- cgit v1.2.3 From 61e9916eba35dfb76d38013a5aae9a59cc50877a Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 24 Sep 2008 22:56:25 +0000 Subject: powerpc: Fix failure to shutdown with CPU hotplug I tracked down the shutdown regression to CPUs not dying when being shut down during power-off. This turns out to be due to the system_state being SYSTEM_POWER_OFF, which this code doesn't take as a valid state for shutting off CPUs in. This has never made sense to me, but when I added hotplug code to implement hibernate I only "made it work" and did not question the need to check the system_state. Thomas Gleixner helped me dig, but the only thing we found is that it was added with the original commit that added CPU hotplug support. Signed-off-by: Johannes Berg Acked-by: Joel Schopp Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/idle.c | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-) diff --git a/arch/powerpc/kernel/idle.c b/arch/powerpc/kernel/idle.c index d308a9f70f1b..31982d05d81a 100644 --- a/arch/powerpc/kernel/idle.c +++ b/arch/powerpc/kernel/idle.c @@ -34,11 +34,7 @@ #include #ifdef CONFIG_HOTPLUG_CPU -/* this is used for software suspend, and that shuts down - * CPUs even while the system is still booting... */ -#define cpu_should_die() (cpu_is_offline(smp_processor_id()) && \ - (system_state == SYSTEM_RUNNING \ - || system_state == SYSTEM_BOOTING)) +#define cpu_should_die() cpu_is_offline(smp_processor_id()) #else #define cpu_should_die() 0 #endif -- cgit v1.2.3 From 2eedd6047b050f82f4e596a50704686ec989c1c8 Mon Sep 17 00:00:00 2001 From: Samuel Ortiz Date: Thu, 25 Sep 2008 00:39:05 +0200 Subject: mfd: Fix Kconfig accroding to the new gpiolib symbols HAVE_GPIO_LIB has basically been replaced by GPIOLIB Signed-off-by: Samuel Ortiz --- drivers/mfd/Kconfig | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index 10c44d3fe01a..68dc8d9eb24e 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -21,7 +21,7 @@ config MFD_SM501 config MFD_SM501_GPIO bool "Export GPIO via GPIO layer" - depends on MFD_SM501 && HAVE_GPIO_LIB + depends on MFD_SM501 && GPIOLIB ---help--- This option uses the gpio library layer to export the 64 GPIO lines on the SM501. The platform data is used to supply the @@ -29,7 +29,7 @@ config MFD_SM501_GPIO config MFD_ASIC3 bool "Support for Compaq ASIC3" - depends on GENERIC_HARDIRQS && HAVE_GPIO_LIB && ARM + depends on GENERIC_HARDIRQS && GPIOLIB && ARM ---help--- This driver supports the ASIC3 multifunction chip found on many PDAs (mainly iPAQ and HTC based ones) -- cgit v1.2.3 From 6cac6e8489af6c419cb6af6911535a280e6b6c2e Mon Sep 17 00:00:00 2001 From: Samuel Ortiz Date: Thu, 25 Sep 2008 00:43:59 +0200 Subject: mfd: Fix asic3 compilation map_size was declared from the wrong place. Signed-off-by: Samuel Ortiz --- drivers/mfd/asic3.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/mfd/asic3.c b/drivers/mfd/asic3.c index bc2a807f210d..ba5aa2008273 100644 --- a/drivers/mfd/asic3.c +++ b/drivers/mfd/asic3.c @@ -312,7 +312,6 @@ static int __init asic3_irq_probe(struct platform_device *pdev) struct asic3 *asic = platform_get_drvdata(pdev); unsigned long clksel = 0; unsigned int irq, irq_base; - int map_size; int ret; ret = platform_get_irq(pdev, 0); @@ -534,6 +533,7 @@ static int __init asic3_probe(struct platform_device *pdev) struct asic3 *asic; struct resource *mem; unsigned long clksel; + int map_size; int ret = 0; asic = kzalloc(sizeof(struct asic3), GFP_KERNEL); -- cgit v1.2.3 From 3dcd7e269d2223126f6ee9bc893f5a6166e1770d Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?J=2EA=2E=20Magall=C3=B3n?= Date: Tue, 30 Sep 2008 10:02:52 +0200 Subject: x86: fix typo in enable_mtrr_cleanup early parameter Correct typo for 'enable_mtrr_cleanup' early boot param name. Signed-off-by: J.A. Magallon Signed-off-by: Ingo Molnar --- arch/x86/kernel/cpu/mtrr/main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/kernel/cpu/mtrr/main.c b/arch/x86/kernel/cpu/mtrr/main.c index b117d7f8a564..885c8265e6b5 100644 --- a/arch/x86/kernel/cpu/mtrr/main.c +++ b/arch/x86/kernel/cpu/mtrr/main.c @@ -834,7 +834,7 @@ static int __init enable_mtrr_cleanup_setup(char *str) enable_mtrr_cleanup = 1; return 0; } -early_param("enble_mtrr_cleanup", enable_mtrr_cleanup_setup); +early_param("enable_mtrr_cleanup", enable_mtrr_cleanup_setup); struct var_mtrr_state { unsigned long range_startk; -- cgit v1.2.3 From d01dbeb6af7a0848063033f73c3d146fec7451f3 Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Tue, 30 Sep 2008 02:03:19 -0700 Subject: ipsec: Fix pskb_expand_head corruption in xfrm_state_check_space We're never supposed to shrink the headroom or tailroom. In fact, shrinking the headroom is a fatal action. Signed-off-by: Herbert Xu Signed-off-by: David S. Miller --- net/xfrm/xfrm_output.c | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-) diff --git a/net/xfrm/xfrm_output.c b/net/xfrm/xfrm_output.c index ac25b4c0e982..dc50f1e71f76 100644 --- a/net/xfrm/xfrm_output.c +++ b/net/xfrm/xfrm_output.c @@ -27,10 +27,14 @@ static int xfrm_state_check_space(struct xfrm_state *x, struct sk_buff *skb) - skb_headroom(skb); int ntail = dst->dev->needed_tailroom - skb_tailroom(skb); - if (nhead > 0 || ntail > 0) - return pskb_expand_head(skb, nhead, ntail, GFP_ATOMIC); - - return 0; + if (nhead <= 0) { + if (ntail <= 0) + return 0; + nhead = 0; + } else if (ntail < 0) + ntail = 0; + + return pskb_expand_head(skb, nhead, ntail, GFP_ATOMIC); } static int xfrm_output_one(struct sk_buff *skb, int err) -- cgit v1.2.3 From 8b122efd13a227d35d5ca242561770db1b5e3658 Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Tue, 30 Sep 2008 03:03:35 -0700 Subject: iucv: Fix mismerge again. fb65a7c091529bfffb1262515252c0d0f6241c5c ("iucv: Fix bad merging.") fixed a merge error, but in a wrong way. We now end up with the bug below. This patch corrects the mismerge like it was intended. BUG: scheduling while atomic: swapper/1/0x00000000 Modules linked in: CPU: 1 Not tainted 2.6.27-rc7-00094-gc0f4d6d #9 Process swapper (pid: 1, task: 000000003fe7d988, ksp: 000000003fe838c0) 0000000000000000 000000003fe839b8 0000000000000002 0000000000000000 000000003fe83a58 000000003fe839d0 000000003fe839d0 0000000000390de6 000000000058acd8 00000000000000d0 000000003fe7dcd8 0000000000000000 000000000000000c 000000000000000d 0000000000000000 000000003fe83a28 000000000039c5b8 0000000000015e5e 000000003fe839b8 000000003fe83a00 Call Trace: ([<0000000000015d6a>] show_trace+0xe6/0x134) [<0000000000039656>] __schedule_bug+0xa2/0xa8 [<0000000000391744>] schedule+0x49c/0x910 [<0000000000391f64>] schedule_timeout+0xc4/0x114 [<00000000003910d4>] wait_for_common+0xe8/0x1b4 [<00000000000549ae>] call_usermodehelper_exec+0xa6/0xec [<00000000001af7b8>] kobject_uevent_env+0x418/0x438 [<00000000001d08fc>] bus_add_driver+0x1e4/0x298 [<00000000001d1ee4>] driver_register+0x90/0x18c [<0000000000566848>] netiucv_init+0x168/0x2c8 [<00000000000120be>] do_one_initcall+0x3e/0x17c [<000000000054a31a>] kernel_init+0x1ce/0x248 [<000000000001a97a>] kernel_thread_starter+0x6/0xc [<000000000001a974>] kernel_thread_starter+0x0/0xc iucv: NETIUCV driver initialized initcall netiucv_init+0x0/0x2c8 returned with preemption imbalance Signed-off-by: Heiko Carstens Signed-off-by: David S. Miller --- net/iucv/iucv.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/net/iucv/iucv.c b/net/iucv/iucv.c index 705959b31e24..d7b54b5bfa69 100644 --- a/net/iucv/iucv.c +++ b/net/iucv/iucv.c @@ -524,7 +524,6 @@ static int iucv_enable(void) get_online_cpus(); for_each_online_cpu(cpu) smp_call_function_single(cpu, iucv_declare_cpu, NULL, 1); - preempt_enable(); if (cpus_empty(iucv_buffer_cpumask)) /* No cpu could declare an iucv buffer. */ goto out_path; @@ -547,7 +546,9 @@ out: */ static void iucv_disable(void) { + get_online_cpus(); on_each_cpu(iucv_retrieve_cpu, NULL, 1); + put_online_cpus(); kfree(iucv_path_table); } -- cgit v1.2.3 From e3145dfb7b4262fa55907006b75da799de8c1be3 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Tue, 30 Sep 2008 11:40:37 +0200 Subject: ALSA: ASoC: Fix cs4270 error path The error path in cs4270_probe/cs4270_remove is pretty broken: * If cs4270_probe fails, codec is leaked. * If snd_soc_register_card fails, cs4270_i2c_driver stays registered. * If I2C support is enabled but no I2C device is found, i2c_del_driver is never called (neither in cs4270_probe nor in cs4270_remove. Fix all 3 problems by implementing a clean error path in cs4270_probe and jumping to its labels as needed. Signed-off-by: Jean Delvare Acked-by: Timur Tabi Signed-off-by: Takashi Iwai --- sound/soc/codecs/cs4270.c | 25 ++++++++++++++++++------- 1 file changed, 18 insertions(+), 7 deletions(-) diff --git a/sound/soc/codecs/cs4270.c b/sound/soc/codecs/cs4270.c index d68650de39bc..0bbd94501d7e 100644 --- a/sound/soc/codecs/cs4270.c +++ b/sound/soc/codecs/cs4270.c @@ -681,7 +681,7 @@ static int cs4270_probe(struct platform_device *pdev) ret = snd_soc_new_pcms(socdev, SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1); if (ret < 0) { printk(KERN_ERR "cs4270: failed to create PCMs\n"); - return ret; + goto error_free_codec; } #ifdef USE_I2C @@ -690,8 +690,7 @@ static int cs4270_probe(struct platform_device *pdev) ret = i2c_add_driver(&cs4270_i2c_driver); if (ret) { printk(KERN_ERR "cs4270: failed to attach driver"); - snd_soc_free_pcms(socdev); - return ret; + goto error_free_pcms; } /* Did we find a CS4270 on the I2C bus? */ @@ -713,10 +712,23 @@ static int cs4270_probe(struct platform_device *pdev) ret = snd_soc_register_card(socdev); if (ret < 0) { printk(KERN_ERR "cs4270: failed to register card\n"); - snd_soc_free_pcms(socdev); - return ret; + goto error_del_driver; } + return 0; + +error_del_driver: +#ifdef USE_I2C + i2c_del_driver(&cs4270_i2c_driver); + +error_free_pcms: +#endif + snd_soc_free_pcms(socdev); + +error_free_codec: + kfree(socdev->codec); + socdev->codec = NULL; + return ret; } @@ -727,8 +739,7 @@ static int cs4270_remove(struct platform_device *pdev) snd_soc_free_pcms(socdev); #ifdef USE_I2C - if (socdev->codec->control_data) - i2c_del_driver(&cs4270_i2c_driver); + i2c_del_driver(&cs4270_i2c_driver); #endif kfree(socdev->codec); -- cgit v1.2.3 From 24918b61b55c21e09a3e07cd82e1b3a8154782dc Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Tue, 30 Sep 2008 12:58:54 +0200 Subject: ALSA: hda - Fix model for Dell Inspiron 1525 Dell Inspiron 1525 seems to have a buggy BIOS setup and screws up the recent codec parser, as reported by Oleksandr Natalenko: http://lkml.org/lkml/2008/9/12/203 This patch adds the working model, dell-3stack, statically. Signed-off-by: Takashi Iwai Cc: --- sound/pci/hda/patch_sigmatel.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c index ad994fcab725..f3da621f25c5 100644 --- a/sound/pci/hda/patch_sigmatel.c +++ b/sound/pci/hda/patch_sigmatel.c @@ -1683,8 +1683,8 @@ static struct snd_pci_quirk stac927x_cfg_tbl[] = { /* Dell 3 stack systems with verb table in BIOS */ SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x01f3, "Dell Inspiron 1420", STAC_DELL_BIOS), SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x0227, "Dell Vostro 1400 ", STAC_DELL_BIOS), - SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x022f, "Dell ", STAC_DELL_BIOS), SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x022e, "Dell ", STAC_DELL_BIOS), + SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x022f, "Dell Inspiron 1525", STAC_DELL_3ST), SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x0242, "Dell ", STAC_DELL_BIOS), SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x0243, "Dell ", STAC_DELL_BIOS), SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x02ff, "Dell ", STAC_DELL_BIOS), -- cgit v1.2.3 From ba0166708ef4da7eeb61dd92bbba4d5a749d6561 Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Tue, 30 Sep 2008 05:32:24 -0700 Subject: sctp: Fix kernel panic while process protocol violation parameter Since call to function sctp_sf_abort_violation() need paramter 'arg' with 'struct sctp_chunk' type, it will read the chunk type and chunk length from the chunk_hdr member of chunk. But call to sctp_sf_violation_paramlen() always with 'struct sctp_paramhdr' type's parameter, it will be passed to sctp_sf_abort_violation(). This may cause kernel panic. sctp_sf_violation_paramlen() |-- sctp_sf_abort_violation() |-- sctp_make_abort_violation() This patch fixed this problem. This patch also fix two place which called sctp_sf_violation_paramlen() with wrong paramter type. Signed-off-by: Wei Yongjun Signed-off-by: Vlad Yasevich Signed-off-by: David S. Miller --- include/net/sctp/sm.h | 3 +++ net/sctp/sm_make_chunk.c | 37 ++++++++++++++++++++++++------------- net/sctp/sm_statefuns.c | 48 +++++++++++++++++++++++++++++++++++++----------- 3 files changed, 64 insertions(+), 24 deletions(-) diff --git a/include/net/sctp/sm.h b/include/net/sctp/sm.h index 24811732bdb2..029a54a02396 100644 --- a/include/net/sctp/sm.h +++ b/include/net/sctp/sm.h @@ -227,6 +227,9 @@ struct sctp_chunk *sctp_make_abort_violation(const struct sctp_association *, const struct sctp_chunk *, const __u8 *, const size_t ); +struct sctp_chunk *sctp_make_violation_paramlen(const struct sctp_association *, + const struct sctp_chunk *, + struct sctp_paramhdr *); struct sctp_chunk *sctp_make_heartbeat(const struct sctp_association *, const struct sctp_transport *, const void *payload, diff --git a/net/sctp/sm_make_chunk.c b/net/sctp/sm_make_chunk.c index b599cbba4fbe..d68869f966c3 100644 --- a/net/sctp/sm_make_chunk.c +++ b/net/sctp/sm_make_chunk.c @@ -1012,6 +1012,29 @@ end: return retval; } +struct sctp_chunk *sctp_make_violation_paramlen( + const struct sctp_association *asoc, + const struct sctp_chunk *chunk, + struct sctp_paramhdr *param) +{ + struct sctp_chunk *retval; + static const char error[] = "The following parameter had invalid length:"; + size_t payload_len = sizeof(error) + sizeof(sctp_errhdr_t) + + sizeof(sctp_paramhdr_t); + + retval = sctp_make_abort(asoc, chunk, payload_len); + if (!retval) + goto nodata; + + sctp_init_cause(retval, SCTP_ERROR_PROTO_VIOLATION, + sizeof(error) + sizeof(sctp_paramhdr_t)); + sctp_addto_chunk(retval, sizeof(error), error); + sctp_addto_param(retval, sizeof(sctp_paramhdr_t), param); + +nodata: + return retval; +} + /* Make a HEARTBEAT chunk. */ struct sctp_chunk *sctp_make_heartbeat(const struct sctp_association *asoc, const struct sctp_transport *transport, @@ -1782,11 +1805,6 @@ static int sctp_process_inv_paramlength(const struct sctp_association *asoc, const struct sctp_chunk *chunk, struct sctp_chunk **errp) { - static const char error[] = "The following parameter had invalid length:"; - size_t payload_len = WORD_ROUND(sizeof(error)) + - sizeof(sctp_paramhdr_t); - - /* This is a fatal error. Any accumulated non-fatal errors are * not reported. */ @@ -1794,14 +1812,7 @@ static int sctp_process_inv_paramlength(const struct sctp_association *asoc, sctp_chunk_free(*errp); /* Create an error chunk and fill it in with our payload. */ - *errp = sctp_make_op_error_space(asoc, chunk, payload_len); - - if (*errp) { - sctp_init_cause(*errp, SCTP_ERROR_PROTO_VIOLATION, - sizeof(error) + sizeof(sctp_paramhdr_t)); - sctp_addto_chunk(*errp, sizeof(error), error); - sctp_addto_param(*errp, sizeof(sctp_paramhdr_t), param); - } + *errp = sctp_make_violation_paramlen(asoc, chunk, param); return 0; } diff --git a/net/sctp/sm_statefuns.c b/net/sctp/sm_statefuns.c index 8848d329aa2c..7c622af2ce55 100644 --- a/net/sctp/sm_statefuns.c +++ b/net/sctp/sm_statefuns.c @@ -119,7 +119,7 @@ static sctp_disposition_t sctp_sf_violation_paramlen( const struct sctp_endpoint *ep, const struct sctp_association *asoc, const sctp_subtype_t type, - void *arg, + void *arg, void *ext, sctp_cmd_seq_t *commands); static sctp_disposition_t sctp_sf_violation_ctsn( @@ -3425,7 +3425,7 @@ sctp_disposition_t sctp_sf_do_asconf(const struct sctp_endpoint *ep, addr_param = (union sctp_addr_param *)hdr->params; length = ntohs(addr_param->p.length); if (length < sizeof(sctp_paramhdr_t)) - return sctp_sf_violation_paramlen(ep, asoc, type, + return sctp_sf_violation_paramlen(ep, asoc, type, arg, (void *)addr_param, commands); /* Verify the ASCONF chunk before processing it. */ @@ -3433,8 +3433,8 @@ sctp_disposition_t sctp_sf_do_asconf(const struct sctp_endpoint *ep, (sctp_paramhdr_t *)((void *)addr_param + length), (void *)chunk->chunk_end, &err_param)) - return sctp_sf_violation_paramlen(ep, asoc, type, - (void *)&err_param, commands); + return sctp_sf_violation_paramlen(ep, asoc, type, arg, + (void *)err_param, commands); /* ADDIP 5.2 E1) Compare the value of the serial number to the value * the endpoint stored in a new association variable @@ -3542,8 +3542,8 @@ sctp_disposition_t sctp_sf_do_asconf_ack(const struct sctp_endpoint *ep, (sctp_paramhdr_t *)addip_hdr->params, (void *)asconf_ack->chunk_end, &err_param)) - return sctp_sf_violation_paramlen(ep, asoc, type, - (void *)&err_param, commands); + return sctp_sf_violation_paramlen(ep, asoc, type, arg, + (void *)err_param, commands); if (last_asconf) { addip_hdr = (sctp_addiphdr_t *)last_asconf->subh.addip_hdr; @@ -4240,12 +4240,38 @@ static sctp_disposition_t sctp_sf_violation_paramlen( const struct sctp_endpoint *ep, const struct sctp_association *asoc, const sctp_subtype_t type, - void *arg, - sctp_cmd_seq_t *commands) { - static const char err_str[] = "The following parameter had invalid length:"; + void *arg, void *ext, + sctp_cmd_seq_t *commands) +{ + struct sctp_chunk *chunk = arg; + struct sctp_paramhdr *param = ext; + struct sctp_chunk *abort = NULL; - return sctp_sf_abort_violation(ep, asoc, arg, commands, err_str, - sizeof(err_str)); + if (sctp_auth_recv_cid(SCTP_CID_ABORT, asoc)) + goto discard; + + /* Make the abort chunk. */ + abort = sctp_make_violation_paramlen(asoc, chunk, param); + if (!abort) + goto nomem; + + sctp_add_cmd_sf(commands, SCTP_CMD_REPLY, SCTP_CHUNK(abort)); + SCTP_INC_STATS(SCTP_MIB_OUTCTRLCHUNKS); + + sctp_add_cmd_sf(commands, SCTP_CMD_SET_SK_ERR, + SCTP_ERROR(ECONNABORTED)); + sctp_add_cmd_sf(commands, SCTP_CMD_ASSOC_FAILED, + SCTP_PERR(SCTP_ERROR_PROTO_VIOLATION)); + SCTP_DEC_STATS(SCTP_MIB_CURRESTAB); + +discard: + sctp_sf_pdiscard(ep, asoc, SCTP_ST_CHUNK(0), arg, commands); + + SCTP_INC_STATS(SCTP_MIB_ABORTEDS); + + return SCTP_DISPOSITION_ABORT; +nomem: + return SCTP_DISPOSITION_NOMEM; } /* Handle a protocol violation when the peer trying to advance the -- cgit v1.2.3 From de59985e3a623d4d5d6207f1777398ca0606ab1c Mon Sep 17 00:00:00 2001 From: Zachary Amsden Date: Tue, 30 Sep 2008 11:02:12 -0700 Subject: x86: Fix broken LDT access in VMI After investigating a JRE failure, I found this bug was introduced a long time ago, and had already managed to survive another bugfix which occurred on the same line. The result is a total failure of the JRE due to LDT selectors not working properly. This one took a long time to rear up because LDT usage is not very common, but the bug is quite serious. It got introduced along with another bug, already fixed, by 75b8bb3e56ca09a467fbbe5229bc68627f7445be Signed-off-by: Zachary Amsden Cc: Ingo Molnar Cc: Glauber de Oliveira Costa Cc: Signed-off-by: Linus Torvalds --- arch/x86/kernel/vmi_32.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/kernel/vmi_32.c b/arch/x86/kernel/vmi_32.c index 6ca515d6db54..edfb09f30479 100644 --- a/arch/x86/kernel/vmi_32.c +++ b/arch/x86/kernel/vmi_32.c @@ -235,7 +235,7 @@ static void vmi_write_ldt_entry(struct desc_struct *dt, int entry, const void *desc) { u32 *ldt_entry = (u32 *)desc; - vmi_ops.write_idt_entry(dt, entry, ldt_entry[0], ldt_entry[1]); + vmi_ops.write_ldt_entry(dt, entry, ldt_entry[0], ldt_entry[1]); } static void vmi_load_sp0(struct tss_struct *tss, -- cgit v1.2.3 From dc63b52673d71f9d49b9d72d263a9f32df18c3ee Mon Sep 17 00:00:00 2001 From: Zachary Amsden Date: Tue, 30 Sep 2008 11:02:12 -0700 Subject: x86, vmi: fix broken LDT access This one took a long time to rear up because LDT usage is not very common, but the bug is quite serious. It got introduced along with another bug, already fixed, by 75b8bb3e56ca09a467fbbe5229bc68627f7445be After investigating a JRE failure, I found this bug was introduced a long time ago, and had already managed to survive another bugfix which occurred on the same line. The result is a total failure of the JRE due to LDT selectors not working properly. Signed-off-by: Zachary Amsden Cc: Glauber de Oliveira Costa Cc: stable@kernel.org Signed-off-by: Ingo Molnar --- arch/x86/kernel/vmi_32.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/kernel/vmi_32.c b/arch/x86/kernel/vmi_32.c index 6ca515d6db54..edfb09f30479 100644 --- a/arch/x86/kernel/vmi_32.c +++ b/arch/x86/kernel/vmi_32.c @@ -235,7 +235,7 @@ static void vmi_write_ldt_entry(struct desc_struct *dt, int entry, const void *desc) { u32 *ldt_entry = (u32 *)desc; - vmi_ops.write_idt_entry(dt, entry, ldt_entry[0], ldt_entry[1]); + vmi_ops.write_ldt_entry(dt, entry, ldt_entry[0], ldt_entry[1]); } static void vmi_load_sp0(struct tss_struct *tss, -- cgit v1.2.3 From 4dd7972d1204c3851a4092cecd2207e05eb29b09 Mon Sep 17 00:00:00 2001 From: Vitaliy Gusev Date: Wed, 1 Oct 2008 01:51:39 -0700 Subject: tcp: Fix NULL dereference in tcp_4_send_ack() Fix NULL dereference in tcp_4_send_ack(). As skb->dev is reset to NULL in tcp_v4_rcv() thus OOPS occurs: BUG: unable to handle kernel NULL pointer dereference at 00000000000004d0 IP: [] tcp_v4_send_ack+0x203/0x250 Stack: ffff810005dbb000 ffff810015c8acc0 e77b2c6e5f861600 a01610802e90cb6d 0a08010100000000 88afffff88afffff 0000000080762be8 0000000115c872e8 0004122000000000 0000000000000001 ffffffff80762b88 0000000000000020 Call Trace: [] tcp_v4_reqsk_send_ack+0x20/0x22 [] tcp_check_req+0x108/0x14c [] ? rt_intern_hash+0x322/0x33c [] tcp_v4_do_rcv+0x399/0x4ec [] ? skb_checksum+0x4f/0x272 [] ? __inet_lookup_listener+0x14a/0x15c [] tcp_v4_rcv+0x6a1/0x701 [] ip_local_deliver_finish+0x157/0x24a [] ip_local_deliver+0x72/0x7c [] ip_rcv_finish+0x38d/0x3b2 [] ? scsi_io_completion+0x19d/0x39e [] ip_rcv+0x2a2/0x2e5 [] netif_receive_skb+0x293/0x303 [] process_backlog+0x80/0xd0 [] ? __rcu_process_callbacks+0x125/0x1b4 [] net_rx_action+0xb9/0x17f [] __do_softirq+0xa3/0x164 [] call_softirq+0x1c/0x28 [] do_softirq+0x34/0x72 [] local_bh_enable_ip+0x3f/0x50 [] _spin_unlock_bh+0x12/0x14 [] release_sock+0xb8/0xc1 [] inet_stream_connect+0x146/0x25c [] ? autoremove_wake_function+0x0/0x38 [] sys_connect+0x68/0x8e [] ? fd_install+0x5f/0x68 [] ? sock_map_fd+0x55/0x62 [] system_call_after_swapgs+0x7b/0x80 Code: 41 10 11 d0 83 d0 00 4d 85 ed 89 45 c0 c7 45 c4 08 00 00 00 74 07 41 8b 45 04 89 45 c8 48 8b 43 20 8b 4d b8 48 8d 55 b0 48 89 de <48> 8b 80 d0 04 00 00 48 8b b8 60 01 00 00 e8 20 ae fe ff 65 48 RIP [] tcp_v4_send_ack+0x203/0x250 RSP CR2: 00000000000004d0 Signed-off-by: Vitaliy Gusev Signed-off-by: David S. Miller --- net/ipv4/tcp_ipv4.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/ipv4/tcp_ipv4.c b/net/ipv4/tcp_ipv4.c index 1b4fee20fc93..011478e46c40 100644 --- a/net/ipv4/tcp_ipv4.c +++ b/net/ipv4/tcp_ipv4.c @@ -618,7 +618,7 @@ static void tcp_v4_send_ack(struct sk_buff *skb, u32 seq, u32 ack, ]; } rep; struct ip_reply_arg arg; - struct net *net = dev_net(skb->dev); + struct net *net = dev_net(skb->dst->dev); memset(&rep.th, 0, sizeof(struct tcphdr)); memset(&arg, 0, sizeof(arg)); -- cgit v1.2.3 From 2a5b82751f73a0bf6f604ce56d34adba6da1b246 Mon Sep 17 00:00:00 2001 From: "Denis V. Lunev" Date: Wed, 1 Oct 2008 02:13:16 -0700 Subject: ipv6: NULL pointer dereferrence in tcp_v6_send_ack The following actions are possible: tcp_v6_rcv skb->dev = NULL; tcp_v6_do_rcv tcp_v6_hnd_req tcp_check_req req->rsk_ops->send_ack == tcp_v6_send_ack So, skb->dev can be NULL in tcp_v6_send_ack. We must obtain namespace from dst entry. Thanks to Vitaliy Gusev for initial problem finding in IPv4 code. Signed-off-by: Denis V. Lunev Signed-off-by: David S. Miller --- net/ipv6/tcp_ipv6.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/ipv6/tcp_ipv6.c b/net/ipv6/tcp_ipv6.c index b585c850a89a..10e22fd48222 100644 --- a/net/ipv6/tcp_ipv6.c +++ b/net/ipv6/tcp_ipv6.c @@ -1050,7 +1050,7 @@ static void tcp_v6_send_ack(struct sk_buff *skb, u32 seq, u32 ack, u32 win, u32 struct tcphdr *th = tcp_hdr(skb), *t1; struct sk_buff *buff; struct flowi fl; - struct net *net = dev_net(skb->dev); + struct net *net = dev_net(skb->dst->dev); struct sock *ctl_sk = net->ipv6.tcp_sk; unsigned int tot_len = sizeof(struct tcphdr); __be32 *topt; -- cgit v1.2.3 From 5dc121e9a7a8a3721cefeb07f3559f50fbedc67e Mon Sep 17 00:00:00 2001 From: Arnaud Ebalard Date: Wed, 1 Oct 2008 02:37:56 -0700 Subject: XFRM,IPv6: initialize ip6_dst_blackhole_ops.kmem_cachep ip6_dst_blackhole_ops.kmem_cachep is not expected to be NULL (i.e. to be initialized) when dst_alloc() is called from ip6_dst_blackhole(). Otherwise, it results in the following (xfrm_larval_drop is now set to 1 by default): [ 78.697642] Unable to handle kernel paging request for data at address 0x0000004c [ 78.703449] Faulting instruction address: 0xc0097f54 [ 78.786896] Oops: Kernel access of bad area, sig: 11 [#1] [ 78.792791] PowerMac [ 78.798383] Modules linked in: btusb usbhid bluetooth b43 mac80211 cfg80211 ehci_hcd ohci_hcd sungem sungem_phy usbcore ssb [ 78.804263] NIP: c0097f54 LR: c0334a28 CTR: c002d430 [ 78.809997] REGS: eef19ad0 TRAP: 0300 Not tainted (2.6.27-rc5) [ 78.815743] MSR: 00001032 CR: 22242482 XER: 20000000 [ 78.821550] DAR: 0000004c, DSISR: 40000000 [ 78.827278] TASK = eef0df40[3035] 'mip6d' THREAD: eef18000 [ 78.827408] GPR00: 00001032 eef19b80 eef0df40 00000000 00008020 eef19c30 00000001 00000000 [ 78.833249] GPR08: eee5101c c05a5c10 ef9ad500 00000000 24242422 1005787c 00000000 1004f960 [ 78.839151] GPR16: 00000000 10024e90 10050040 48030018 0fe44150 00000000 00000000 eef19c30 [ 78.845046] GPR24: eef19e44 00000000 eef19bf8 efb37c14 eef19bf8 00008020 00009032 c0596064 [ 78.856671] NIP [c0097f54] kmem_cache_alloc+0x20/0x94 [ 78.862581] LR [c0334a28] dst_alloc+0x40/0xc4 [ 78.868451] Call Trace: [ 78.874252] [eef19b80] [c03c1810] ip6_dst_lookup_tail+0x1c8/0x1dc (unreliable) [ 78.880222] [eef19ba0] [c0334a28] dst_alloc+0x40/0xc4 [ 78.886164] [eef19bb0] [c03cd698] ip6_dst_blackhole+0x28/0x1cc [ 78.892090] [eef19be0] [c03d9be8] rawv6_sendmsg+0x75c/0xc88 [ 78.897999] [eef19cb0] [c038bca4] inet_sendmsg+0x4c/0x78 [ 78.903907] [eef19cd0] [c03207c8] sock_sendmsg+0xac/0xe4 [ 78.909734] [eef19db0] [c03209e4] sys_sendmsg+0x1e4/0x2a0 [ 78.915540] [eef19f00] [c03220a8] sys_socketcall+0xfc/0x210 [ 78.921406] [eef19f40] [c0014b3c] ret_from_syscall+0x0/0x38 [ 78.927295] --- Exception: c01 at 0xfe2d730 [ 78.927297] LR = 0xfe2d71c [ 78.939019] Instruction dump: [ 78.944835] 91640018 9144001c 900a0000 4bffff44 9421ffe0 7c0802a6 bf810010 7c9d2378 [ 78.950694] 90010024 7fc000a6 57c0045e 7c000124 <83e3004c> 8383005c 2f9f0000 419e0050 [ 78.956464] ---[ end trace 05fa1ed7972487a1 ]--- As commented by Benjamin Thery, the bug was introduced by f2fc6a54585a1be6669613a31fbaba2ecbadcd36, while adding network namespaces support to ipv6 routes. Signed-off-by: Arnaud Ebalard Acked-by: Benjamin Thery Signed-off-by: David S. Miller --- net/ipv6/route.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/net/ipv6/route.c b/net/ipv6/route.c index 9af6115f0f50..63442a1e741c 100644 --- a/net/ipv6/route.c +++ b/net/ipv6/route.c @@ -2688,6 +2688,8 @@ int __init ip6_route_init(void) if (ret) goto out_kmem_cache; + ip6_dst_blackhole_ops.kmem_cachep = ip6_dst_ops_template.kmem_cachep; + /* Registering of the loopback is done before this portion of code, * the loopback reference in rt6_info will not be taken, do it * manually for init_net */ -- cgit v1.2.3 From 0523820482dcb42784572ffd2296c2f08c275a2b Mon Sep 17 00:00:00 2001 From: Timo Teras Date: Wed, 1 Oct 2008 05:17:54 -0700 Subject: af_key: Free dumping state on socket close Fix a xfrm_{state,policy}_walk leak if pfkey socket is closed while dumping is on-going. Signed-off-by: Timo Teras Signed-off-by: David S. Miller --- net/key/af_key.c | 30 +++++++++++++++++++----------- 1 file changed, 19 insertions(+), 11 deletions(-) diff --git a/net/key/af_key.c b/net/key/af_key.c index d628df97e02e..b7f5a1c353ee 100644 --- a/net/key/af_key.c +++ b/net/key/af_key.c @@ -73,22 +73,18 @@ static int pfkey_can_dump(struct sock *sk) return 0; } -static int pfkey_do_dump(struct pfkey_sock *pfk) +static void pfkey_terminate_dump(struct pfkey_sock *pfk) { - int rc; - - rc = pfk->dump.dump(pfk); - if (rc == -ENOBUFS) - return 0; - - pfk->dump.done(pfk); - pfk->dump.dump = NULL; - pfk->dump.done = NULL; - return rc; + if (pfk->dump.dump) { + pfk->dump.done(pfk); + pfk->dump.dump = NULL; + pfk->dump.done = NULL; + } } static void pfkey_sock_destruct(struct sock *sk) { + pfkey_terminate_dump(pfkey_sk(sk)); skb_queue_purge(&sk->sk_receive_queue); if (!sock_flag(sk, SOCK_DEAD)) { @@ -310,6 +306,18 @@ static int pfkey_broadcast(struct sk_buff *skb, gfp_t allocation, return err; } +static int pfkey_do_dump(struct pfkey_sock *pfk) +{ + int rc; + + rc = pfk->dump.dump(pfk); + if (rc == -ENOBUFS) + return 0; + + pfkey_terminate_dump(pfk); + return rc; +} + static inline void pfkey_hdr_dup(struct sadb_msg *new, struct sadb_msg *orig) { *new = *orig; -- cgit v1.2.3 From 5037108acd4dc40c210321cc83b0bf8352eda95a Mon Sep 17 00:00:00 2001 From: Mikulas Patocka Date: Wed, 1 Oct 2008 14:39:17 +0100 Subject: dm: always allow one page in dm_merge_bvec Some callers assume they can always add at least one page to an empty bio, so dm_merge_bvec should not return 0 in this case: we'll reject the I/O later after the bio is submitted. Signed-off-by: Mikulas Patocka Signed-off-by: Alasdair G Kergon --- drivers/md/dm.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/drivers/md/dm.c b/drivers/md/dm.c index bca448e11878..469cec54f371 100644 --- a/drivers/md/dm.c +++ b/drivers/md/dm.c @@ -837,10 +837,10 @@ static int dm_merge_bvec(struct request_queue *q, struct dm_table *map = dm_get_table(md); struct dm_target *ti; sector_t max_sectors; - int max_size; + int max_size = 0; if (unlikely(!map)) - return 0; + goto out; ti = dm_table_find_target(map, bvm->bi_sector); @@ -861,14 +861,15 @@ static int dm_merge_bvec(struct request_queue *q, if (max_size && ti->type->merge) max_size = ti->type->merge(ti, bvm, biovec, max_size); + dm_table_put(map); + +out: /* * Always allow an entire first page */ if (max_size <= biovec->bv_len && !(bvm->bi_size >> SECTOR_SHIFT)) max_size = biovec->bv_len; - dm_table_put(map); - return max_size; } -- cgit v1.2.3 From b01cd5ac43b00c49759c126c21e7d22c7e80b245 Mon Sep 17 00:00:00 2001 From: Mikulas Patocka Date: Wed, 1 Oct 2008 14:39:24 +0100 Subject: dm: cope with access beyond end of device in dm_merge_bvec If for any reason dm_merge_bvec() is given an offset beyond the end of the device, avoid an oops and always allow one page to be added to an empty bio. We'll reject the I/O later after the bio is submitted. Signed-off-by: Mikulas Patocka Signed-off-by: Alasdair G Kergon --- drivers/md/dm.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/md/dm.c b/drivers/md/dm.c index 469cec54f371..ace998ce59f6 100644 --- a/drivers/md/dm.c +++ b/drivers/md/dm.c @@ -843,6 +843,8 @@ static int dm_merge_bvec(struct request_queue *q, goto out; ti = dm_table_find_target(map, bvm->bi_sector); + if (!dm_target_is_valid(ti)) + goto out_table; /* * Find maximum amount of I/O that won't need splitting @@ -861,6 +863,7 @@ static int dm_merge_bvec(struct request_queue *q, if (max_size && ti->type->merge) max_size = ti->type->merge(ti, bvm, biovec, max_size); +out_table: dm_table_put(map); out: -- cgit v1.2.3 From 7253a33434245ee8243897559188186df65f3611 Mon Sep 17 00:00:00 2001 From: Chandra Seetharaman Date: Wed, 1 Oct 2008 14:39:27 +0100 Subject: dm mpath: add missing path switching locking Moving the path activation to workqueue along with scsi_dh patches introduced a race. It is due to the fact that the current_pgpath (in the multipath data structure) can be modified if changes happen in any of the paths leading to the lun. If the changes lead to current_pgpath being set to NULL, then it leads to the invalid access which results in the panic below. This patch fixes that by storing the pgpath to activate in the multipath data structure and properly protecting it. Note that if activate_path is called twice in succession with different pgpath, with the second one being called before the first one is done, then activate path will be called twice for the second pgpath, which is fine. Unable to handle kernel paging request for data at address 0x00000020 Faulting instruction address: 0xd000000000aa1844 cpu 0x1: Vector: 300 (Data Access) at [c00000006b987a80] pc: d000000000aa1844: .activate_path+0x30/0x218 [dm_multipath] lr: c000000000087a2c: .run_workqueue+0x114/0x204 sp: c00000006b987d00 msr: 8000000000009032 dar: 20 dsisr: 40000000 current = 0xc0000000676bb3f0 paca = 0xc0000000006f3680 pid = 2528, comm = kmpath_handlerd enter ? for help [c00000006b987da0] c000000000087a2c .run_workqueue+0x114/0x204 [c00000006b987e40] c000000000088b58 .worker_thread+0x120/0x144 [c00000006b987f00] c00000000008ca70 .kthread+0x78/0xc4 [c00000006b987f90] c000000000027cc8 .kernel_thread+0x4c/0x68 Signed-off-by: Chandra Seetharaman Signed-off-by: Alasdair G Kergon --- drivers/md/dm-mpath.c | 16 +++++++++++++++- 1 file changed, 15 insertions(+), 1 deletion(-) diff --git a/drivers/md/dm-mpath.c b/drivers/md/dm-mpath.c index 71dd65aa31b6..c2fcf28b4c70 100644 --- a/drivers/md/dm-mpath.c +++ b/drivers/md/dm-mpath.c @@ -63,6 +63,7 @@ struct multipath { const char *hw_handler_name; struct work_struct activate_path; + struct pgpath *pgpath_to_activate; unsigned nr_priority_groups; struct list_head priority_groups; unsigned pg_init_required; /* pg_init needs calling? */ @@ -146,6 +147,7 @@ static struct priority_group *alloc_priority_group(void) static void free_pgpaths(struct list_head *pgpaths, struct dm_target *ti) { + unsigned long flags; struct pgpath *pgpath, *tmp; struct multipath *m = ti->private; @@ -154,6 +156,10 @@ static void free_pgpaths(struct list_head *pgpaths, struct dm_target *ti) if (m->hw_handler_name) scsi_dh_detach(bdev_get_queue(pgpath->path.dev->bdev)); dm_put_device(ti, pgpath->path.dev); + spin_lock_irqsave(&m->lock, flags); + if (m->pgpath_to_activate == pgpath) + m->pgpath_to_activate = NULL; + spin_unlock_irqrestore(&m->lock, flags); free_pgpath(pgpath); } } @@ -421,6 +427,7 @@ static void process_queued_ios(struct work_struct *work) __choose_pgpath(m); pgpath = m->current_pgpath; + m->pgpath_to_activate = m->current_pgpath; if ((pgpath && !m->queue_io) || (!pgpath && !m->queue_if_no_path)) @@ -1093,8 +1100,15 @@ static void activate_path(struct work_struct *work) int ret; struct multipath *m = container_of(work, struct multipath, activate_path); - struct dm_path *path = &m->current_pgpath->path; + struct dm_path *path; + unsigned long flags; + spin_lock_irqsave(&m->lock, flags); + path = &m->pgpath_to_activate->path; + m->pgpath_to_activate = NULL; + spin_unlock_irqrestore(&m->lock, flags); + if (!path) + return; ret = scsi_dh_activate(bdev_get_queue(path->dev->bdev)); pg_init_done(path, ret); } -- cgit v1.2.3 From d6478fad430e37148b56f642c87301ba72476675 Mon Sep 17 00:00:00 2001 From: David Howells Date: Wed, 1 Oct 2008 13:47:06 +0100 Subject: MN10300: Fix IRQ handling Fix the IRQ handling on the MN10300 arch. This patch makes a number of significant changes: (1) It separates the irq_chip definition for edge-triggered interrupts from the one for level-triggered interrupts. This is necessary because the MN10300 PIC latches the IRQ channel's interrupt request bit (GxICR_REQUEST), even after the device has ceased to assert its interrupt line and the interrupt channel has been disabled in the PIC. So for level-triggered interrupts we need to clear this bit when we re-enable - which is achieved by setting GxICR_DETECT but not GxICR_REQUEST when writing to the register. Not doing this results in spurious interrupts occurring because calling mask_ack() at the start of handle_level_irq() is insufficient - it fails to clear the REQUEST latch because the device that caused the interrupt is still asserting its interrupt line at this point. (2) IRQ disablement [irq_chip::disable_irq()] shouldn't clear the interrupt request flag for edge-triggered interrupts lest it lose an interrupt. (3) IRQ unmasking [irq_chip::unmask_irq()] also shouldn't clear the interrupt request flag for edge-triggered interrupts lest it lose an interrupt. (4) The end() operation is now left to the default (no-operation) as __do_IRQ() is compiled out. This may affect misrouted_irq(), but according to Thomas Gleixner it's the correct thing to do. (5) handle_level_irq() is used for edge-triggered interrupts rather than handle_edge_irq() as the MN10300 PIC latches interrupt events even on masked IRQ channels, thus rendering IRQ_PENDING unnecessary. It is sufficient to call mask_ack() at the start and unmask() at the end. (6) For level-triggered interrupts, ack() is now NULL as it's not used, and there is no effective ACK function on the PIC. mask_ack() is now the same as mask() as the latch continues to latch, even when the channel is masked. Further, the patch discards the disable() op implementation as its now the same as the mask() op implementation, which is used instead. It also discards the enable() op implementations as they're now the same as the unmask() op implementations, which are used instead. Signed-off-by: David Howells Signed-off-by: Linus Torvalds --- arch/mn10300/kernel/irq.c | 71 ++++++++++++++++++++++------------- arch/mn10300/unit-asb2303/unit-init.c | 2 +- arch/mn10300/unit-asb2305/unit-init.c | 2 +- 3 files changed, 47 insertions(+), 28 deletions(-) diff --git a/arch/mn10300/kernel/irq.c b/arch/mn10300/kernel/irq.c index 761c434a2488..56c64ccc9c21 100644 --- a/arch/mn10300/kernel/irq.c +++ b/arch/mn10300/kernel/irq.c @@ -20,22 +20,8 @@ EXPORT_SYMBOL(__mn10300_irq_enabled_epsw); atomic_t irq_err_count; /* - * MN10300 INTC controller operations + * MN10300 interrupt controller operations */ -static void mn10300_cpupic_disable(unsigned int irq) -{ - u16 tmp = GxICR(irq); - GxICR(irq) = (tmp & GxICR_LEVEL) | GxICR_DETECT; - tmp = GxICR(irq); -} - -static void mn10300_cpupic_enable(unsigned int irq) -{ - u16 tmp = GxICR(irq); - GxICR(irq) = (tmp & GxICR_LEVEL) | GxICR_ENABLE; - tmp = GxICR(irq); -} - static void mn10300_cpupic_ack(unsigned int irq) { u16 tmp; @@ -60,26 +46,54 @@ static void mn10300_cpupic_mask_ack(unsigned int irq) static void mn10300_cpupic_unmask(unsigned int irq) { u16 tmp = GxICR(irq); - GxICR(irq) = (tmp & GxICR_LEVEL) | GxICR_ENABLE | GxICR_DETECT; + GxICR(irq) = (tmp & GxICR_LEVEL) | GxICR_ENABLE; tmp = GxICR(irq); } -static void mn10300_cpupic_end(unsigned int irq) +static void mn10300_cpupic_unmask_clear(unsigned int irq) { + /* the MN10300 PIC latches its interrupt request bit, even after the + * device has ceased to assert its interrupt line and the interrupt + * channel has been disabled in the PIC, so for level-triggered + * interrupts we need to clear the request bit when we re-enable */ u16 tmp = GxICR(irq); - GxICR(irq) = (tmp & GxICR_LEVEL) | GxICR_ENABLE; + GxICR(irq) = (tmp & GxICR_LEVEL) | GxICR_ENABLE | GxICR_DETECT; tmp = GxICR(irq); } -static struct irq_chip mn10300_cpu_pic = { - .name = "cpu", - .disable = mn10300_cpupic_disable, - .enable = mn10300_cpupic_enable, +/* + * MN10300 PIC level-triggered IRQ handling. + * + * The PIC has no 'ACK' function per se. It is possible to clear individual + * channel latches, but each latch relatches whether or not the channel is + * masked, so we need to clear the latch when we unmask the channel. + * + * Also for this reason, we don't supply an ack() op (it's unused anyway if + * mask_ack() is provided), and mask_ack() just masks. + */ +static struct irq_chip mn10300_cpu_pic_level = { + .name = "cpu_l", + .disable = mn10300_cpupic_mask, + .enable = mn10300_cpupic_unmask_clear, + .ack = NULL, + .mask = mn10300_cpupic_mask, + .mask_ack = mn10300_cpupic_mask, + .unmask = mn10300_cpupic_unmask_clear, +}; + +/* + * MN10300 PIC edge-triggered IRQ handling. + * + * We use the latch clearing function of the PIC as the 'ACK' function. + */ +static struct irq_chip mn10300_cpu_pic_edge = { + .name = "cpu_e", + .disable = mn10300_cpupic_mask, + .enable = mn10300_cpupic_unmask, .ack = mn10300_cpupic_ack, .mask = mn10300_cpupic_mask, .mask_ack = mn10300_cpupic_mask_ack, .unmask = mn10300_cpupic_unmask, - .end = mn10300_cpupic_end, }; /* @@ -114,7 +128,8 @@ void set_intr_level(int irq, u16 level) */ void set_intr_postackable(int irq) { - set_irq_handler(irq, handle_level_irq); + set_irq_chip_and_handler(irq, &mn10300_cpu_pic_level, + handle_level_irq); } /* @@ -126,8 +141,12 @@ void __init init_IRQ(void) for (irq = 0; irq < NR_IRQS; irq++) if (irq_desc[irq].chip == &no_irq_type) - set_irq_chip_and_handler(irq, &mn10300_cpu_pic, - handle_edge_irq); + /* due to the PIC latching interrupt requests, even + * when the IRQ is disabled, IRQ_PENDING is superfluous + * and we can use handle_level_irq() for edge-triggered + * interrupts */ + set_irq_chip_and_handler(irq, &mn10300_cpu_pic_edge, + handle_level_irq); unit_init_IRQ(); } diff --git a/arch/mn10300/unit-asb2303/unit-init.c b/arch/mn10300/unit-asb2303/unit-init.c index 14b2c817cff8..70e8cb4ea266 100644 --- a/arch/mn10300/unit-asb2303/unit-init.c +++ b/arch/mn10300/unit-asb2303/unit-init.c @@ -51,7 +51,7 @@ void __init unit_init_IRQ(void) switch (GET_XIRQ_TRIGGER(extnum)) { case XIRQ_TRIGGER_HILEVEL: case XIRQ_TRIGGER_LOWLEVEL: - set_irq_handler(XIRQ2IRQ(extnum), handle_level_irq); + set_intr_postackable(XIRQ2IRQ(extnum)); break; default: break; diff --git a/arch/mn10300/unit-asb2305/unit-init.c b/arch/mn10300/unit-asb2305/unit-init.c index 6a352414a358..72812a9439ac 100644 --- a/arch/mn10300/unit-asb2305/unit-init.c +++ b/arch/mn10300/unit-asb2305/unit-init.c @@ -52,7 +52,7 @@ void __init unit_init_IRQ(void) switch (GET_XIRQ_TRIGGER(extnum)) { case XIRQ_TRIGGER_HILEVEL: case XIRQ_TRIGGER_LOWLEVEL: - set_irq_handler(XIRQ2IRQ(extnum), handle_level_irq); + set_intr_postackable(XIRQ2IRQ(extnum)); break; default: break; -- cgit v1.2.3 From 20b918dc77b383e9779dafceee3f2198a6f7b0e5 Mon Sep 17 00:00:00 2001 From: Mike Rapoport Date: Wed, 1 Oct 2008 10:39:24 -0700 Subject: pxa2xx_spi: fix build breakage This patch fixes a build error in the pxa2xx-spi driver, introduced by commit 7e96445533ac3f4f7964646a202ff3620602fab4 ("pxa2xx_spi: dma bugfixes") CC drivers/spi/pxa2xx_spi.o drivers/spi/pxa2xx_spi.c: In function 'map_dma_buffers': drivers/spi/pxa2xx_spi.c:331: error: invalid operands to binary & drivers/spi/pxa2xx_spi.c:331: error: invalid operands to binary & drivers/spi/pxa2xx_spi.c: In function 'pump_transfers': drivers/spi/pxa2xx_spi.c:897: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'unsigned int' [dbrownell@users.sourceforge.net: fix warning too ] Signed-off-by: Mike Rapoport Acked-by: Eric Miao Signed-off-by: Andrew Morton Signed-off-by: David Brownell Signed-off-by: Linus Torvalds --- drivers/spi/pxa2xx_spi.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/spi/pxa2xx_spi.c b/drivers/spi/pxa2xx_spi.c index 0e53354c1cfe..d47d3636227f 100644 --- a/drivers/spi/pxa2xx_spi.c +++ b/drivers/spi/pxa2xx_spi.c @@ -49,7 +49,7 @@ MODULE_ALIAS("platform:pxa2xx-spi"); #define DMA_INT_MASK (DCSR_ENDINTR | DCSR_STARTINTR | DCSR_BUSERR) #define RESET_DMA_CHANNEL (DCSR_NODESC | DMA_INT_MASK) -#define IS_DMA_ALIGNED(x) (((x) & 0x07) == 0) +#define IS_DMA_ALIGNED(x) ((((u32)(x)) & 0x07) == 0) #define MAX_DMA_LEN 8191 /* @@ -896,7 +896,7 @@ static void pump_transfers(unsigned long data) || transfer->rx_dma || transfer->tx_dma) { dev_err(&drv_data->pdev->dev, "pump_transfers: mapped transfer length " - "of %lu is greater than %d\n", + "of %u is greater than %d\n", transfer->len, MAX_DMA_LEN); message->status = -EINVAL; giveback(drv_data); -- cgit v1.2.3 From 4a7703582836f55a1cbad0e2c1c6ebbee3f9b3a7 Mon Sep 17 00:00:00 2001 From: Bruce Allan Date: Wed, 1 Oct 2008 17:18:35 -0700 Subject: e1000e: write protect ICHx NVM to prevent malicious write/erase Set the hardware to ignore all write/erase cycles to the GbE region in the ICHx NVM. This feature can be disabled by the WriteProtectNVM module parameter (enabled by default) only after a hardware reset, but the machine must be power cycled before trying to enable writes. Signed-off-by: Bruce Allan Signed-off-by: Jesse Brandeburg CC: arjan@linux.intel.com Signed-off-by: Linus Torvalds --- drivers/net/e1000e/e1000.h | 2 ++ drivers/net/e1000e/ethtool.c | 3 +++ drivers/net/e1000e/ich8lan.c | 58 ++++++++++++++++++++++++++++++++++++++++++++ drivers/net/e1000e/netdev.c | 10 +++++--- drivers/net/e1000e/param.c | 30 +++++++++++++++++++++++ 5 files changed, 100 insertions(+), 3 deletions(-) diff --git a/drivers/net/e1000e/e1000.h b/drivers/net/e1000e/e1000.h index ac4e506b4f88..f0c48a2a6799 100644 --- a/drivers/net/e1000e/e1000.h +++ b/drivers/net/e1000e/e1000.h @@ -305,6 +305,7 @@ struct e1000_info { #define FLAG_HAS_CTRLEXT_ON_LOAD (1 << 5) #define FLAG_HAS_SWSM_ON_LOAD (1 << 6) #define FLAG_HAS_JUMBO_FRAMES (1 << 7) +#define FLAG_READ_ONLY_NVM (1 << 8) #define FLAG_IS_ICH (1 << 9) #define FLAG_HAS_SMART_POWER_DOWN (1 << 11) #define FLAG_IS_QUAD_PORT_A (1 << 12) @@ -385,6 +386,7 @@ extern bool e1000e_enable_mng_pass_thru(struct e1000_hw *hw); extern bool e1000e_get_laa_state_82571(struct e1000_hw *hw); extern void e1000e_set_laa_state_82571(struct e1000_hw *hw, bool state); +extern void e1000e_write_protect_nvm_ich8lan(struct e1000_hw *hw); extern void e1000e_set_kmrn_lock_loss_workaround_ich8lan(struct e1000_hw *hw, bool state); extern void e1000e_igp3_phy_powerdown_workaround_ich8lan(struct e1000_hw *hw); diff --git a/drivers/net/e1000e/ethtool.c b/drivers/net/e1000e/ethtool.c index e21c9e0f3738..5ed8e13d5fed 100644 --- a/drivers/net/e1000e/ethtool.c +++ b/drivers/net/e1000e/ethtool.c @@ -529,6 +529,9 @@ static int e1000_set_eeprom(struct net_device *netdev, if (eeprom->magic != (adapter->pdev->vendor | (adapter->pdev->device << 16))) return -EFAULT; + if (adapter->flags & FLAG_READ_ONLY_NVM) + return -EINVAL; + max_len = hw->nvm.word_size * 2; first_word = eeprom->offset >> 1; diff --git a/drivers/net/e1000e/ich8lan.c b/drivers/net/e1000e/ich8lan.c index 9e38452a738c..d8efba884134 100644 --- a/drivers/net/e1000e/ich8lan.c +++ b/drivers/net/e1000e/ich8lan.c @@ -58,6 +58,7 @@ #define ICH_FLASH_HSFCTL 0x0006 #define ICH_FLASH_FADDR 0x0008 #define ICH_FLASH_FDATA0 0x0010 +#define ICH_FLASH_PR0 0x0074 #define ICH_FLASH_READ_COMMAND_TIMEOUT 500 #define ICH_FLASH_WRITE_COMMAND_TIMEOUT 500 @@ -150,6 +151,19 @@ union ich8_hws_flash_regacc { u16 regval; }; +/* ICH Flash Protected Region */ +union ich8_flash_protected_range { + struct ich8_pr { + u32 base:13; /* 0:12 Protected Range Base */ + u32 reserved1:2; /* 13:14 Reserved */ + u32 rpe:1; /* 15 Read Protection Enable */ + u32 limit:13; /* 16:28 Protected Range Limit */ + u32 reserved2:2; /* 29:30 Reserved */ + u32 wpe:1; /* 31 Write Protection Enable */ + } range; + u32 regval; +}; + static s32 e1000_setup_link_ich8lan(struct e1000_hw *hw); static void e1000_clear_hw_cntrs_ich8lan(struct e1000_hw *hw); static void e1000_initialize_hw_bits_ich8lan(struct e1000_hw *hw); @@ -1284,6 +1298,7 @@ static s32 e1000_update_nvm_checksum_ich8lan(struct e1000_hw *hw) * programming failed. */ if (ret_val) { + /* Possibly read-only, see e1000e_write_protect_nvm_ich8lan() */ hw_dbg(hw, "Flash commit failed.\n"); e1000_release_swflag_ich8lan(hw); return ret_val; @@ -1373,6 +1388,49 @@ static s32 e1000_validate_nvm_checksum_ich8lan(struct e1000_hw *hw) return e1000e_validate_nvm_checksum_generic(hw); } +/** + * e1000e_write_protect_nvm_ich8lan - Make the NVM read-only + * @hw: pointer to the HW structure + * + * To prevent malicious write/erase of the NVM, set it to be read-only + * so that the hardware ignores all write/erase cycles of the NVM via + * the flash control registers. The shadow-ram copy of the NVM will + * still be updated, however any updates to this copy will not stick + * across driver reloads. + **/ +void e1000e_write_protect_nvm_ich8lan(struct e1000_hw *hw) +{ + union ich8_flash_protected_range pr0; + union ich8_hws_flash_status hsfsts; + u32 gfpreg; + s32 ret_val; + + ret_val = e1000_acquire_swflag_ich8lan(hw); + if (ret_val) + return; + + gfpreg = er32flash(ICH_FLASH_GFPREG); + + /* Write-protect GbE Sector of NVM */ + pr0.regval = er32flash(ICH_FLASH_PR0); + pr0.range.base = gfpreg & FLASH_GFPREG_BASE_MASK; + pr0.range.limit = ((gfpreg >> 16) & FLASH_GFPREG_BASE_MASK); + pr0.range.wpe = true; + ew32flash(ICH_FLASH_PR0, pr0.regval); + + /* + * Lock down a subset of GbE Flash Control Registers, e.g. + * PR0 to prevent the write-protection from being lifted. + * Once FLOCKDN is set, the registers protected by it cannot + * be written until FLOCKDN is cleared by a hardware reset. + */ + hsfsts.regval = er16flash(ICH_FLASH_HSFSTS); + hsfsts.hsf_status.flockdn = true; + ew32flash(ICH_FLASH_HSFSTS, hsfsts.regval); + + e1000_release_swflag_ich8lan(hw); +} + /** * e1000_write_flash_data_ich8lan - Writes bytes to the NVM * @hw: pointer to the HW structure diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c index d266510c8a94..1f767feda9a7 100644 --- a/drivers/net/e1000e/netdev.c +++ b/drivers/net/e1000e/netdev.c @@ -47,7 +47,7 @@ #include "e1000.h" -#define DRV_VERSION "0.3.3.3-k2" +#define DRV_VERSION "0.3.3.3-k4" char e1000e_driver_name[] = "e1000e"; const char e1000e_driver_version[] = DRV_VERSION; @@ -4467,6 +4467,8 @@ static int __devinit e1000_probe(struct pci_dev *pdev, adapter->bd_number = cards_found++; + e1000e_check_options(adapter); + /* setup adapter struct */ err = e1000_sw_init(adapter); if (err) @@ -4482,6 +4484,10 @@ static int __devinit e1000_probe(struct pci_dev *pdev, if (err) goto err_hw_init; + if ((adapter->flags & FLAG_IS_ICH) && + (adapter->flags & FLAG_READ_ONLY_NVM)) + e1000e_write_protect_nvm_ich8lan(&adapter->hw); + hw->mac.ops.get_bus_info(&adapter->hw); adapter->hw.phy.autoneg_wait_to_complete = 0; @@ -4573,8 +4579,6 @@ static int __devinit e1000_probe(struct pci_dev *pdev, INIT_WORK(&adapter->reset_task, e1000_reset_task); INIT_WORK(&adapter->watchdog_task, e1000_watchdog_task); - e1000e_check_options(adapter); - /* Initialize link parameters. User can change them with ethtool */ adapter->hw.mac.autoneg = 1; adapter->fc_autoneg = 1; diff --git a/drivers/net/e1000e/param.c b/drivers/net/e1000e/param.c index ed912e023a72..d91dbf7ba434 100644 --- a/drivers/net/e1000e/param.c +++ b/drivers/net/e1000e/param.c @@ -133,6 +133,15 @@ E1000_PARAM(SmartPowerDownEnable, "Enable PHY smart power down"); */ E1000_PARAM(KumeranLockLoss, "Enable Kumeran lock loss workaround"); +/* + * Write Protect NVM + * + * Valid Range: 0, 1 + * + * Default Value: 1 (enabled) + */ +E1000_PARAM(WriteProtectNVM, "Write-protect NVM [WARNING: disabling this can lead to corrupted NVM]"); + struct e1000_option { enum { enable_option, range_option, list_option } type; const char *name; @@ -388,4 +397,25 @@ void __devinit e1000e_check_options(struct e1000_adapter *adapter) opt.def); } } + { /* Write-protect NVM */ + const struct e1000_option opt = { + .type = enable_option, + .name = "Write-protect NVM", + .err = "defaulting to Enabled", + .def = OPTION_ENABLED + }; + + if (adapter->flags & FLAG_IS_ICH) { + if (num_WriteProtectNVM > bd) { + unsigned int write_protect_nvm = WriteProtectNVM[bd]; + e1000_validate_option(&write_protect_nvm, &opt, + adapter); + if (write_protect_nvm) + adapter->flags |= FLAG_READ_ONLY_NVM; + } else { + if (opt.def) + adapter->flags |= FLAG_READ_ONLY_NVM; + } + } + } } -- cgit v1.2.3 From 1fce2d01dff65a76cd08c1b145acd9d3c20021d2 Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Thu, 2 Oct 2008 00:58:49 -0500 Subject: powerpc: Fix boot hang regression on MPC8544DS Commit 00c5372d37a78990c1530184a9c792ee60a30067 caused the MPC8544DS board to hang at boot. The MPC8544DS is unique in that it doesn't use the PCI slots on the ULI (unlike the MPC8572DS or MPC8610HPCD). So the dummy read at the end of the address space causes us to hang. We can detect the situation by comparing the bridge's BARs versus the root complex. Signed-off-by: Kumar Gala --- arch/powerpc/platforms/fsl_uli1575.c | 12 +++++++++++- 1 file changed, 11 insertions(+), 1 deletion(-) diff --git a/arch/powerpc/platforms/fsl_uli1575.c b/arch/powerpc/platforms/fsl_uli1575.c index ef74a0763ec1..8c619963becc 100644 --- a/arch/powerpc/platforms/fsl_uli1575.c +++ b/arch/powerpc/platforms/fsl_uli1575.c @@ -219,11 +219,21 @@ static void __devinit quirk_final_uli5249(struct pci_dev *dev) int i; u8 *dummy; struct pci_bus *bus = dev->bus; + resource_size_t end = 0; + + for (i = PCI_BRIDGE_RESOURCES; i < PCI_BRIDGE_RESOURCES+3; i++) { + unsigned long flags = pci_resource_flags(dev, i); + if ((flags & (IORESOURCE_MEM|IORESOURCE_PREFETCH)) == IORESOURCE_MEM) + end = pci_resource_end(dev, i); + } for (i = 0; i < PCI_BUS_NUM_RESOURCES; i++) { if ((bus->resource[i]) && (bus->resource[i]->flags & IORESOURCE_MEM)) { - dummy = ioremap(bus->resource[i]->end - 3, 0x4); + if (bus->resource[i]->end == end) + dummy = ioremap(bus->resource[i]->start, 0x4); + else + dummy = ioremap(bus->resource[i]->end - 3, 0x4); if (dummy) { in_8(dummy); iounmap(dummy); -- cgit v1.2.3 From 4037314afc6eea3eab7e0447884c12b57a081f63 Mon Sep 17 00:00:00 2001 From: Rob Sims Date: Wed, 1 Oct 2008 21:47:31 +0200 Subject: ASoC: Set correct name for WM8753 rec mixer output Rob Sims wrote: "I can't seem to turn on register 0x17, bit 3 in the sound chip, except by codec_reg_write; the mixer lacks direct or indirect control. It seems there are two names for the output of the rec mixer: Capture ST Mixer Playback Mixer Would the following do the trick?" I confirm that this solves the audio problems I was having. Signed-off-by: Jonas Bonn Signed-off-by: Mark Brown Signed-off-by: Takashi Iwai --- sound/soc/codecs/wm8753.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/sound/soc/codecs/wm8753.c b/sound/soc/codecs/wm8753.c index 5761164fe16d..e873414840c8 100644 --- a/sound/soc/codecs/wm8753.c +++ b/sound/soc/codecs/wm8753.c @@ -583,7 +583,7 @@ static const struct snd_soc_dapm_route audio_map[] = { /* out 4 */ {"Out4 Mux", "VREF", "VREF"}, - {"Out4 Mux", "Capture ST", "Capture ST Mixer"}, + {"Out4 Mux", "Capture ST", "Playback Mixer"}, {"Out4 Mux", "LOUT2", "LOUT2"}, {"Out 4", NULL, "Out4 Mux"}, {"OUT4", NULL, "Out 4"}, @@ -607,7 +607,7 @@ static const struct snd_soc_dapm_route audio_map[] = { /* Capture Right Mux */ {"Capture Right Mux", "PGA", "Right Capture Volume"}, {"Capture Right Mux", "Line or RXP-RXN", "Line Right Mux"}, - {"Capture Right Mux", "Sidetone", "Capture ST Mixer"}, + {"Capture Right Mux", "Sidetone", "Playback Mixer"}, /* Mono Capture mixer-mux */ {"Capture Right Mixer", "Stereo", "Capture Right Mux"}, -- cgit v1.2.3 From 4dbf95ba6c344186ec6d38ff514dc675da464bec Mon Sep 17 00:00:00 2001 From: Risto Suominen Date: Mon, 25 Aug 2008 08:02:12 +0200 Subject: ALSA: snd-powermac: mixers for PowerMac G4 AGP Add mixer controls for PowerMac G4 AGP (Screamer). This patch fixes the regression in the recent snd-powermac which doesn't support some G3/G4 PowerMacs: http://lkml.org/lkml/2008/10/1/220 Signed-off-by: Risto Suominen Tested-by: Mariusz Kozlowski Cc: stable@kernel.org Signed-off-by: Takashi Iwai --- sound/ppc/awacs.c | 19 ++++++++++++++++--- 1 file changed, 16 insertions(+), 3 deletions(-) diff --git a/sound/ppc/awacs.c b/sound/ppc/awacs.c index 566a6d0daf4a..543d4f1784a5 100644 --- a/sound/ppc/awacs.c +++ b/sound/ppc/awacs.c @@ -621,6 +621,13 @@ static struct snd_kcontrol_new snd_pmac_screamer_mixers_imac[] __initdata = { AWACS_SWITCH("CD Capture Switch", 0, SHIFT_MUX_CD, 0), }; +static struct snd_kcontrol_new snd_pmac_screamer_mixers_g4agp[] __initdata = { + AWACS_VOLUME("Line out Playback Volume", 2, 6, 1), + AWACS_VOLUME("Master Playback Volume", 5, 6, 1), + AWACS_SWITCH("CD Capture Switch", 0, SHIFT_MUX_CD, 0), + AWACS_SWITCH("Line Capture Switch", 0, SHIFT_MUX_MIC, 0), +}; + static struct snd_kcontrol_new snd_pmac_awacs_mixers_pmac7500[] __initdata = { AWACS_VOLUME("Line out Playback Volume", 2, 6, 1), AWACS_SWITCH("CD Capture Switch", 0, SHIFT_MUX_CD, 0), @@ -768,6 +775,7 @@ static void snd_pmac_awacs_resume(struct snd_pmac *chip) #define IS_IMAC (machine_is_compatible("PowerMac2,1") \ || machine_is_compatible("PowerMac2,2") \ || machine_is_compatible("PowerMac4,1")) +#define IS_G4AGP (machine_is_compatible("PowerMac3,1")) static int imac; @@ -850,6 +858,7 @@ snd_pmac_awacs_init(struct snd_pmac *chip) { int pm7500 = IS_PM7500; int beige = IS_BEIGE; + int g4agp = IS_G4AGP; int err, vol; imac = IS_IMAC; @@ -939,7 +948,7 @@ snd_pmac_awacs_init(struct snd_pmac *chip) snd_pmac_awacs_mixers); if (err < 0) return err; - if (beige) + if (beige || g4agp) ; else if (chip->model == PMAC_SCREAMER) err = build_mixers(chip, ARRAY_SIZE(snd_pmac_screamer_mixers2), @@ -961,13 +970,17 @@ snd_pmac_awacs_init(struct snd_pmac *chip) err = build_mixers(chip, ARRAY_SIZE(snd_pmac_screamer_mixers_imac), snd_pmac_screamer_mixers_imac); + else if (g4agp) + err = build_mixers(chip, + ARRAY_SIZE(snd_pmac_screamer_mixers_g4agp), + snd_pmac_screamer_mixers_g4agp); else err = build_mixers(chip, ARRAY_SIZE(snd_pmac_awacs_mixers_pmac), snd_pmac_awacs_mixers_pmac); if (err < 0) return err; - chip->master_sw_ctl = snd_ctl_new1((pm7500 || imac) + chip->master_sw_ctl = snd_ctl_new1((pm7500 || imac || g4agp) ? &snd_pmac_awacs_master_sw_imac : &snd_pmac_awacs_master_sw, chip); err = snd_ctl_add(chip->card, chip->master_sw_ctl); @@ -1012,7 +1025,7 @@ snd_pmac_awacs_init(struct snd_pmac *chip) return err; } - if (beige) + if (beige || g4agp) err = build_mixers(chip, ARRAY_SIZE(snd_pmac_screamer_mic_boost_beige), snd_pmac_screamer_mic_boost_beige); -- cgit v1.2.3 From 030b655b062fe5190fc490e0091ea50307d7a86f Mon Sep 17 00:00:00 2001 From: Risto Suominen Date: Mon, 25 Aug 2008 08:04:23 +0200 Subject: ALSA: snd-powermac: HP detection for 1st iMac G3 SL Correct headphone detection for 1st generation iMac G3 Slot-loading (Screamer). This patch fixes the regression in the recent snd-powermac which doesn't support some G3/G4 PowerMacs: http://lkml.org/lkml/2008/10/1/220 Signed-off-by: Risto Suominen Tested-by: Mariusz Kozlowski Cc: stable@kernel.org Signed-off-by: Takashi Iwai --- sound/ppc/awacs.c | 31 ++++++++++++++++++++++--------- 1 file changed, 22 insertions(+), 9 deletions(-) diff --git a/sound/ppc/awacs.c b/sound/ppc/awacs.c index 543d4f1784a5..106c48225bba 100644 --- a/sound/ppc/awacs.c +++ b/sound/ppc/awacs.c @@ -695,7 +695,10 @@ static struct snd_kcontrol_new snd_pmac_awacs_speaker_vol[] __initdata = { static struct snd_kcontrol_new snd_pmac_awacs_speaker_sw __initdata = AWACS_SWITCH("PC Speaker Playback Switch", 1, SHIFT_SPKMUTE, 1); -static struct snd_kcontrol_new snd_pmac_awacs_speaker_sw_imac __initdata = +static struct snd_kcontrol_new snd_pmac_awacs_speaker_sw_imac1 __initdata = +AWACS_SWITCH("PC Speaker Playback Switch", 1, SHIFT_PAROUT1, 1); + +static struct snd_kcontrol_new snd_pmac_awacs_speaker_sw_imac2 __initdata = AWACS_SWITCH("PC Speaker Playback Switch", 1, SHIFT_PAROUT1, 0); @@ -772,12 +775,12 @@ static void snd_pmac_awacs_resume(struct snd_pmac *chip) #define IS_PM7500 (machine_is_compatible("AAPL,7500")) #define IS_BEIGE (machine_is_compatible("AAPL,Gossamer")) -#define IS_IMAC (machine_is_compatible("PowerMac2,1") \ - || machine_is_compatible("PowerMac2,2") \ +#define IS_IMAC1 (machine_is_compatible("PowerMac2,1")) +#define IS_IMAC2 (machine_is_compatible("PowerMac2,2") \ || machine_is_compatible("PowerMac4,1")) #define IS_G4AGP (machine_is_compatible("PowerMac3,1")) -static int imac; +static int imac1, imac2; #ifdef PMAC_SUPPORT_AUTOMUTE /* @@ -823,13 +826,18 @@ static void snd_pmac_awacs_update_automute(struct snd_pmac *chip, int do_notify) { int reg = chip->awacs_reg[1] | (MASK_HDMUTE | MASK_SPKMUTE); - if (imac) { + if (imac1) { + reg &= ~MASK_SPKMUTE; + reg |= MASK_PAROUT1; + } else if (imac2) { reg &= ~MASK_SPKMUTE; reg &= ~MASK_PAROUT1; } if (snd_pmac_awacs_detect_headphone(chip)) reg &= ~MASK_HDMUTE; - else if (imac) + else if (imac1) + reg &= ~MASK_PAROUT1; + else if (imac2) reg |= MASK_PAROUT1; else reg &= ~MASK_SPKMUTE; @@ -859,9 +867,12 @@ snd_pmac_awacs_init(struct snd_pmac *chip) int pm7500 = IS_PM7500; int beige = IS_BEIGE; int g4agp = IS_G4AGP; + int imac; int err, vol; - imac = IS_IMAC; + imac1 = IS_IMAC1; + imac2 = IS_IMAC2; + imac = imac1 || imac2; /* looks like MASK_GAINLINE triggers something, so we set here * as start-up */ @@ -1017,8 +1028,10 @@ snd_pmac_awacs_init(struct snd_pmac *chip) snd_pmac_awacs_speaker_vol); if (err < 0) return err; - chip->speaker_sw_ctl = snd_ctl_new1(imac - ? &snd_pmac_awacs_speaker_sw_imac + chip->speaker_sw_ctl = snd_ctl_new1(imac1 + ? &snd_pmac_awacs_speaker_sw_imac1 + : imac2 + ? &snd_pmac_awacs_speaker_sw_imac2 : &snd_pmac_awacs_speaker_sw, chip); err = snd_ctl_add(chip->card, chip->speaker_sw_ctl); if (err < 0) -- cgit v1.2.3 From 08650869e0ec581f8d88cfdb563d37f5383abfe2 Mon Sep 17 00:00:00 2001 From: David Winn Date: Thu, 2 Oct 2008 14:50:11 -0700 Subject: fbcon: fix monochrome color value calculation Commit 22af89aa0c0b4012a7431114a340efd3665a7617 ("fbcon: replace mono_col macro with static inline") changed the order of operations for computing monochrome color values. This generates 0xffff000f instead of 0x0000000f for a 4 bit monochrome color, leading to image corruption if it is passed to cfb_imageblit or other similar functions. Fix it up. Cc: Harvey Harrison Cc: "Antonino A. Daplas" Cc: Krzysztof Helt Cc: [2.6.26.x] Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/video/console/fbcon.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/video/console/fbcon.h b/drivers/video/console/fbcon.h index a6e38e9ea73f..89a346880ec0 100644 --- a/drivers/video/console/fbcon.h +++ b/drivers/video/console/fbcon.h @@ -110,7 +110,7 @@ static inline int mono_col(const struct fb_info *info) __u32 max_len; max_len = max(info->var.green.length, info->var.red.length); max_len = max(info->var.blue.length, max_len); - return ~(0xfff << (max_len & 0xff)); + return (~(0xfff << max_len)) & 0xff; } static inline int attr_col_ec(int shift, struct vc_data *vc, -- cgit v1.2.3 From 16dbc6c9616363fe53811abcbd935336dc0a0f01 Mon Sep 17 00:00:00 2001 From: Nick Piggin Date: Thu, 2 Oct 2008 14:50:12 -0700 Subject: inotify: fix lock ordering wrt do_page_fault's mmap_sem Fix inotify lock order reversal with mmap_sem due to holding locks over copy_to_user. Signed-off-by: Nick Piggin Reported-by: "Daniel J Blueman" Tested-by: "Daniel J Blueman" Cc: Ingo Molnar Cc: Peter Zijlstra Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/inotify_user.c | 27 ++++++++++++++++++++------- include/asm-x86/uaccess_64.h | 1 + 2 files changed, 21 insertions(+), 7 deletions(-) diff --git a/fs/inotify_user.c b/fs/inotify_user.c index 60249429a253..d85c7d931cdf 100644 --- a/fs/inotify_user.c +++ b/fs/inotify_user.c @@ -323,7 +323,7 @@ out: } /* - * remove_kevent - cleans up and ultimately frees the given kevent + * remove_kevent - cleans up the given kevent * * Caller must hold dev->ev_mutex. */ @@ -334,7 +334,13 @@ static void remove_kevent(struct inotify_device *dev, dev->event_count--; dev->queue_size -= sizeof(struct inotify_event) + kevent->event.len; +} +/* + * free_kevent - frees the given kevent. + */ +static void free_kevent(struct inotify_kernel_event *kevent) +{ kfree(kevent->name); kmem_cache_free(event_cachep, kevent); } @@ -350,6 +356,7 @@ static void inotify_dev_event_dequeue(struct inotify_device *dev) struct inotify_kernel_event *kevent; kevent = inotify_dev_get_event(dev); remove_kevent(dev, kevent); + free_kevent(kevent); } } @@ -433,17 +440,15 @@ static ssize_t inotify_read(struct file *file, char __user *buf, dev = file->private_data; while (1) { - int events; prepare_to_wait(&dev->wq, &wait, TASK_INTERRUPTIBLE); mutex_lock(&dev->ev_mutex); - events = !list_empty(&dev->events); - mutex_unlock(&dev->ev_mutex); - if (events) { + if (!list_empty(&dev->events)) { ret = 0; break; } + mutex_unlock(&dev->ev_mutex); if (file->f_flags & O_NONBLOCK) { ret = -EAGAIN; @@ -462,7 +467,6 @@ static ssize_t inotify_read(struct file *file, char __user *buf, if (ret) return ret; - mutex_lock(&dev->ev_mutex); while (1) { struct inotify_kernel_event *kevent; @@ -481,6 +485,13 @@ static ssize_t inotify_read(struct file *file, char __user *buf, } break; } + remove_kevent(dev, kevent); + + /* + * Must perform the copy_to_user outside the mutex in order + * to avoid a lock order reversal with mmap_sem. + */ + mutex_unlock(&dev->ev_mutex); if (copy_to_user(buf, &kevent->event, event_size)) { ret = -EFAULT; @@ -498,7 +509,9 @@ static ssize_t inotify_read(struct file *file, char __user *buf, count -= kevent->event.len; } - remove_kevent(dev, kevent); + free_kevent(kevent); + + mutex_lock(&dev->ev_mutex); } mutex_unlock(&dev->ev_mutex); diff --git a/include/asm-x86/uaccess_64.h b/include/asm-x86/uaccess_64.h index 515d4dce96b5..45806d60bcbe 100644 --- a/include/asm-x86/uaccess_64.h +++ b/include/asm-x86/uaccess_64.h @@ -7,6 +7,7 @@ #include #include #include +#include #include /* -- cgit v1.2.3 From c0c9209ddd96bc4f1d70a8b9958710671e076080 Mon Sep 17 00:00:00 2001 From: Pascal Terjan Date: Thu, 2 Oct 2008 14:50:13 -0700 Subject: braille_console: only register notifiers when the braille console is used Only register the braille driver VT and keyboard notifiers when the braille console is used. Avoids eating insert or backspace keys. Addresses http://bugzilla.kernel.org/show_bug.cgi?id=11242 Signed-off-by: Pascal Terjan Signed-off-by: Samuel Thibault Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/accessibility/braille/braille_console.c | 13 ++++--------- 1 file changed, 4 insertions(+), 9 deletions(-) diff --git a/drivers/accessibility/braille/braille_console.c b/drivers/accessibility/braille/braille_console.c index 0a5f6b2114c5..d672cfe7ca59 100644 --- a/drivers/accessibility/braille/braille_console.c +++ b/drivers/accessibility/braille/braille_console.c @@ -376,6 +376,8 @@ int braille_register_console(struct console *console, int index, console->flags |= CON_ENABLED; console->index = index; braille_co = console; + register_keyboard_notifier(&keyboard_notifier_block); + register_vt_notifier(&vt_notifier_block); return 0; } @@ -383,15 +385,8 @@ int braille_unregister_console(struct console *console) { if (braille_co != console) return -EINVAL; + unregister_keyboard_notifier(&keyboard_notifier_block); + unregister_vt_notifier(&vt_notifier_block); braille_co = NULL; return 0; } - -static int __init braille_init(void) -{ - register_keyboard_notifier(&keyboard_notifier_block); - register_vt_notifier(&vt_notifier_block); - return 0; -} - -console_initcall(braille_init); -- cgit v1.2.3 From aa94fbd5ccd840c8ab26d02439ec799b03a72547 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Thu, 2 Oct 2008 14:50:14 -0700 Subject: fix error-path NULL deref in alloc_posix_timer() Found by static checker (http://repo.or.cz/w/smatch.git). Signed-off-by: Dan Carpenter Acked-by: Thomas Gleixner Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- kernel/posix-timers.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/kernel/posix-timers.c b/kernel/posix-timers.c index e36d5798cbff..5131e5471169 100644 --- a/kernel/posix-timers.c +++ b/kernel/posix-timers.c @@ -441,7 +441,7 @@ static struct k_itimer * alloc_posix_timer(void) return tmr; if (unlikely(!(tmr->sigq = sigqueue_alloc()))) { kmem_cache_free(posix_timers_cache, tmr); - tmr = NULL; + return NULL; } memset(&tmr->sigq->info, 0, sizeof(siginfo_t)); return tmr; -- cgit v1.2.3 From 6c1b7f680dd4f550fa6f91f148cc6fa2c4bd0737 Mon Sep 17 00:00:00 2001 From: Gerald Schaefer Date: Thu, 2 Oct 2008 14:50:16 -0700 Subject: memory hotplug: missing zone->lock in test_pages_isolated() __test_page_isolated_in_pageblock() in mm/page_isolation.c has a comment saying that the caller must hold zone->lock. But the only caller of that function, test_pages_isolated(), does not hold zone->lock and the lock is also not acquired anywhere before. This patch adds the missing zone->lock to test_pages_isolated(). We reproducibly run into BUG_ON(!PageBuddy(page)) in __offline_isolated_pages() during memory hotplug stress test, see trace below. This patch fixes that problem, it would be good if we could have it in 2.6.27. kernel BUG at /home/autobuild/BUILD/linux-2.6.26-20080909/mm/page_alloc.c:4561! illegal operation: 0001 [#1] PREEMPT SMP Modules linked in: dm_multipath sunrpc bonding qeth_l3 dm_mod qeth ccwgroup vmur CPU: 1 Not tainted 2.6.26-29.x.20080909-s390default #1 Process memory_loop_all (pid: 10025, task: 2f444028, ksp: 2b10dd28) Krnl PSW : 040c0000 801727ea (__offline_isolated_pages+0x18e/0x1c4) R:0 T:1 IO:0 EX:0 Key:0 M:1 W:0 P:0 AS:0 CC:0 PM:0 Krnl GPRS: 00000000 7e27fc00 00000000 7e27fc00 00000000 00000400 00014000 7e27fc01 00606f00 7e27fc00 00013fe0 2b10dd28 00000005 80172662 801727b2 2b10dd28 Krnl Code: 801727de: 5810900c l %r1,12(%r9) 801727e2: a7f4ffb3 brc 15,80172748 801727e6: a7f40001 brc 15,801727e8 >801727ea: a7f4ffbc brc 15,80172762 801727ee: a7f40001 brc 15,801727f0 801727f2: a7f4ffaf brc 15,80172750 801727f6: 0707 bcr 0,%r7 801727f8: 0017 unknown Call Trace: ([<0000000000172772>] __offline_isolated_pages+0x116/0x1c4) [<00000000001953a2>] offline_isolated_pages_cb+0x22/0x34 [<000000000013164c>] walk_memory_resource+0xcc/0x11c [<000000000019520e>] offline_pages+0x36a/0x498 [<00000000001004d6>] remove_memory+0x36/0x44 [<000000000028fb06>] memory_block_change_state+0x112/0x150 [<000000000028ffb8>] store_mem_state+0x90/0xe4 [<0000000000289c00>] sysdev_store+0x34/0x40 [<00000000001ee048>] sysfs_write_file+0xd0/0x178 [<000000000019b1a8>] vfs_write+0x74/0x118 [<000000000019b9ae>] sys_write+0x46/0x7c [<000000000011160e>] sysc_do_restart+0x12/0x16 [<0000000077f3e8ca>] 0x77f3e8ca Signed-off-by: Gerald Schaefer Acked-by: KAMEZAWA Hiroyuki Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/page_isolation.c | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-) diff --git a/mm/page_isolation.c b/mm/page_isolation.c index c69f84fe038d..b70a7fec1ff6 100644 --- a/mm/page_isolation.c +++ b/mm/page_isolation.c @@ -114,8 +114,10 @@ __test_page_isolated_in_pageblock(unsigned long pfn, unsigned long end_pfn) int test_pages_isolated(unsigned long start_pfn, unsigned long end_pfn) { - unsigned long pfn; + unsigned long pfn, flags; struct page *page; + struct zone *zone; + int ret; pfn = start_pfn; /* @@ -131,7 +133,9 @@ int test_pages_isolated(unsigned long start_pfn, unsigned long end_pfn) if (pfn < end_pfn) return -EBUSY; /* Check all pages are free or Marked as ISOLATED */ - if (__test_page_isolated_in_pageblock(start_pfn, end_pfn)) - return 0; - return -EBUSY; + zone = page_zone(pfn_to_page(pfn)); + spin_lock_irqsave(&zone->lock, flags); + ret = __test_page_isolated_in_pageblock(start_pfn, end_pfn); + spin_unlock_irqrestore(&zone->lock, flags); + return ret ? 0 : -EBUSY; } -- cgit v1.2.3 From 4b19de6d1cb07c8bcb6778e771f9cfd5bcfdfd3e Mon Sep 17 00:00:00 2001 From: Nick Piggin Date: Thu, 2 Oct 2008 14:50:16 -0700 Subject: mm: tiny-shmem nommu fix The previous patch db203d53d474aa068984e409d807628f5841da1b ("mm: tiny-shmem fix lock ordering: mmap_sem vs i_mutex") to fix the lock ordering in tiny-shmem breaks shared anonymous and IPC memory on NOMMU architectures because it was using the expanding truncate to signal ramfs to allocate a physically contiguous RAM backing the inode (otherwise it is unusable for "memory mapping" it to userspace). However do_truncate is what caused the lock ordering error, due to it taking i_mutex. In this case, we can actually just call ramfs directly to allocate memory for the mapping, rather than go via truncate. Acked-by: David Howells Acked-by: Hugh Dickins Signed-off-by: Nick Piggin Cc: Matt Mackall Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/ramfs/file-nommu.c | 2 +- include/linux/ramfs.h | 1 + mm/tiny-shmem.c | 6 ++++++ 3 files changed, 8 insertions(+), 1 deletion(-) diff --git a/fs/ramfs/file-nommu.c b/fs/ramfs/file-nommu.c index 52312ec93ff4..5145cb9125af 100644 --- a/fs/ramfs/file-nommu.c +++ b/fs/ramfs/file-nommu.c @@ -58,7 +58,7 @@ const struct inode_operations ramfs_file_inode_operations = { * size 0 on the assumption that it's going to be used for an mmap of shared * memory */ -static int ramfs_nommu_expand_for_mapping(struct inode *inode, size_t newsize) +int ramfs_nommu_expand_for_mapping(struct inode *inode, size_t newsize) { struct pagevec lru_pvec; unsigned long npages, xpages, loop, limit; diff --git a/include/linux/ramfs.h b/include/linux/ramfs.h index b160fb18e8d6..37aaf2b39863 100644 --- a/include/linux/ramfs.h +++ b/include/linux/ramfs.h @@ -6,6 +6,7 @@ extern int ramfs_get_sb(struct file_system_type *fs_type, int flags, const char *dev_name, void *data, struct vfsmount *mnt); #ifndef CONFIG_MMU +extern int ramfs_nommu_expand_for_mapping(struct inode *inode, size_t newsize); extern unsigned long ramfs_nommu_get_unmapped_area(struct file *file, unsigned long addr, unsigned long len, diff --git a/mm/tiny-shmem.c b/mm/tiny-shmem.c index d17cb6f6ab10..8d7a27a6335c 100644 --- a/mm/tiny-shmem.c +++ b/mm/tiny-shmem.c @@ -80,6 +80,12 @@ struct file *shmem_file_setup(char *name, loff_t size, unsigned long flags) inode->i_nlink = 0; /* It is unlinked */ init_file(file, shm_mnt, dentry, FMODE_WRITE | FMODE_READ, &ramfs_file_operations); + +#ifndef CONFIG_MMU + error = ramfs_nommu_expand_for_mapping(inode, size); + if (error) + goto close_file; +#endif return file; close_file: -- cgit v1.2.3 From 6babc32c41e3642d875372cb6afbd9ade7a9f311 Mon Sep 17 00:00:00 2001 From: Andy Whitcroft Date: Thu, 2 Oct 2008 14:50:18 -0700 Subject: mm: handle initialising compound pages at orders greater than MAX_ORDER When we initialise a compound page we initialise the page flags and head page pointer for all base pages spanned by that page. When we initialise a gigantic page (a page of order greater than or equal to MAX_ORDER) we have to initialise more than MAX_ORDER_NR_PAGES pages. Currently we assume that all elements of the mem_map in this page are contigious in memory. However this is only guarenteed out to MAX_ORDER_NR_PAGES pages, and with SPARSEMEM enabled they will not be contigious. This leads us to walk off the end of the first section and scribble on everything which follows, BAD. When we reach a MAX_ORDER_NR_PAGES boundary we much locate the next section of the mem_map. As gigantic pages can only be maximally aligned we know this will occur at exact multiple of MAX_ORDER_NR_PAGES pages from the start of the page. This is a bug fix for the gigantic page support in hugetlbfs. Credit to Mel Gorman for spotting the issue. Signed-off-by: Andy Whitcroft Cc: Mel Gorman Cc: Jon Tollefson Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/page_alloc.c | 13 ++++++++----- 1 file changed, 8 insertions(+), 5 deletions(-) diff --git a/mm/page_alloc.c b/mm/page_alloc.c index e293c58bea58..27b8681139fd 100644 --- a/mm/page_alloc.c +++ b/mm/page_alloc.c @@ -268,13 +268,14 @@ void prep_compound_page(struct page *page, unsigned long order) { int i; int nr_pages = 1 << order; + struct page *p = page + 1; set_compound_page_dtor(page, free_compound_page); set_compound_order(page, order); __SetPageHead(page); - for (i = 1; i < nr_pages; i++) { - struct page *p = page + i; - + for (i = 1; i < nr_pages; i++, p++) { + if (unlikely((i & (MAX_ORDER_NR_PAGES - 1)) == 0)) + p = pfn_to_page(page_to_pfn(page) + i); __SetPageTail(p); p->first_page = page; } @@ -284,6 +285,7 @@ static void destroy_compound_page(struct page *page, unsigned long order) { int i; int nr_pages = 1 << order; + struct page *p = page + 1; if (unlikely(compound_order(page) != order)) bad_page(page); @@ -291,8 +293,9 @@ static void destroy_compound_page(struct page *page, unsigned long order) if (unlikely(!PageHead(page))) bad_page(page); __ClearPageHead(page); - for (i = 1; i < nr_pages; i++) { - struct page *p = page + i; + for (i = 1; i < nr_pages; i++, p++) { + if (unlikely((i & (MAX_ORDER_NR_PAGES - 1)) == 0)) + p = pfn_to_page(page_to_pfn(page) + i); if (unlikely(!PageTail(p) | (p->first_page != page))) -- cgit v1.2.3 From 37f40239f49fbc0b489d0327a700fee5b3898ac2 Mon Sep 17 00:00:00 2001 From: Jesse Brandeburg Date: Thu, 2 Oct 2008 16:33:20 -0700 Subject: e1000e: reset swflag after resetting hardware in the process of debugging things, noticed that the swflag is not reset by the driver after reset, and the swflag is probably not reset unless management firmware clears it after 100ms. Signed-off-by: Jesse Brandeburg Signed-off-by: Linus Torvalds --- drivers/net/e1000e/ich8lan.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/net/e1000e/ich8lan.c b/drivers/net/e1000e/ich8lan.c index d8efba884134..f4b6744d71df 100644 --- a/drivers/net/e1000e/ich8lan.c +++ b/drivers/net/e1000e/ich8lan.c @@ -1778,6 +1778,9 @@ static s32 e1000_reset_hw_ich8lan(struct e1000_hw *hw) ew32(CTRL, (ctrl | E1000_CTRL_RST)); msleep(20); + /* release the swflag because it is not reset by hardware reset */ + e1000_release_swflag_ich8lan(hw); + ret_val = e1000e_get_auto_rd_done(hw); if (ret_val) { /* -- cgit v1.2.3 From a8f88ff5a5abc2ce9f7d7d2694178b2c617d713a Mon Sep 17 00:00:00 2001 From: Jesse Brandeburg Date: Thu, 2 Oct 2008 16:33:25 -0700 Subject: e1000e: do not ever sleep in interrupt context e1000e was apparently calling two functions that attempted to reserve the SWFLAG bit for exclusive (to hardware and firmware) access to the PHY and NVM (aka eeprom). These accesses could possibly call msleep to wait for the resource which is not allowed from interrupt context. Signed-off-by: Jesse Brandeburg Acked-by: Thomas Gleixner Tested-by: Thomas Gleixner Signed-off-by: Linus Torvalds --- drivers/net/e1000e/e1000.h | 2 ++ drivers/net/e1000e/netdev.c | 31 ++++++++++++++++++++++++++++--- 2 files changed, 30 insertions(+), 3 deletions(-) diff --git a/drivers/net/e1000e/e1000.h b/drivers/net/e1000e/e1000.h index f0c48a2a6799..8087bda97218 100644 --- a/drivers/net/e1000e/e1000.h +++ b/drivers/net/e1000e/e1000.h @@ -284,6 +284,8 @@ struct e1000_adapter { unsigned long led_status; unsigned int flags; + struct work_struct downshift_task; + struct work_struct update_phy_task; }; struct e1000_info { diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c index 1f767feda9a7..803545b2fc8c 100644 --- a/drivers/net/e1000e/netdev.c +++ b/drivers/net/e1000e/netdev.c @@ -1115,6 +1115,14 @@ static void e1000_clean_rx_ring(struct e1000_adapter *adapter) writel(0, adapter->hw.hw_addr + rx_ring->tail); } +static void e1000e_downshift_workaround(struct work_struct *work) +{ + struct e1000_adapter *adapter = container_of(work, + struct e1000_adapter, downshift_task); + + e1000e_gig_downshift_workaround_ich8lan(&adapter->hw); +} + /** * e1000_intr_msi - Interrupt Handler * @irq: interrupt number @@ -1139,7 +1147,7 @@ static irqreturn_t e1000_intr_msi(int irq, void *data) */ if ((adapter->flags & FLAG_LSC_GIG_SPEED_DROP) && (!(er32(STATUS) & E1000_STATUS_LU))) - e1000e_gig_downshift_workaround_ich8lan(hw); + schedule_work(&adapter->downshift_task); /* * 80003ES2LAN workaround-- For packet buffer work-around on @@ -1205,7 +1213,7 @@ static irqreturn_t e1000_intr(int irq, void *data) */ if ((adapter->flags & FLAG_LSC_GIG_SPEED_DROP) && (!(er32(STATUS) & E1000_STATUS_LU))) - e1000e_gig_downshift_workaround_ich8lan(hw); + schedule_work(&adapter->downshift_task); /* * 80003ES2LAN workaround-- @@ -2912,6 +2920,21 @@ static int e1000_set_mac(struct net_device *netdev, void *p) return 0; } +/** + * e1000e_update_phy_task - work thread to update phy + * @work: pointer to our work struct + * + * this worker thread exists because we must acquire a + * semaphore to read the phy, which we could msleep while + * waiting for it, and we can't msleep in a timer. + **/ +static void e1000e_update_phy_task(struct work_struct *work) +{ + struct e1000_adapter *adapter = container_of(work, + struct e1000_adapter, update_phy_task); + e1000_get_phy_info(&adapter->hw); +} + /* * Need to wait a few seconds after link up to get diagnostic information from * the phy @@ -2919,7 +2942,7 @@ static int e1000_set_mac(struct net_device *netdev, void *p) static void e1000_update_phy_info(unsigned long data) { struct e1000_adapter *adapter = (struct e1000_adapter *) data; - e1000_get_phy_info(&adapter->hw); + schedule_work(&adapter->update_phy_task); } /** @@ -4578,6 +4601,8 @@ static int __devinit e1000_probe(struct pci_dev *pdev, INIT_WORK(&adapter->reset_task, e1000_reset_task); INIT_WORK(&adapter->watchdog_task, e1000_watchdog_task); + INIT_WORK(&adapter->downshift_task, e1000e_downshift_workaround); + INIT_WORK(&adapter->update_phy_task, e1000e_update_phy_task); /* Initialize link parameters. User can change them with ethtool */ adapter->hw.mac.autoneg = 1; -- cgit v1.2.3 From 23033fad5be0a2c7838cb9e1579919b64af713f6 Mon Sep 17 00:00:00 2001 From: Jesse Brandeburg Date: Thu, 2 Oct 2008 16:33:30 -0700 Subject: e1000e: remove phy read from inside spinlock thanks to tglx, we're finding some interesting reentrancy issues. this patch removes the phy read from inside a spinlock, paving the way for removing the spinlock completely. The phy read was only feeding a statistic that wasn't used. Signed-off-by: Jesse Brandeburg Acked-by: Thomas Gleixner Signed-off-by: Linus Torvalds --- drivers/net/e1000e/ethtool.c | 6 +++++- drivers/net/e1000e/netdev.c | 13 ------------- 2 files changed, 5 insertions(+), 14 deletions(-) diff --git a/drivers/net/e1000e/ethtool.c b/drivers/net/e1000e/ethtool.c index 5ed8e13d5fed..33a3ff17b5d0 100644 --- a/drivers/net/e1000e/ethtool.c +++ b/drivers/net/e1000e/ethtool.c @@ -432,6 +432,10 @@ static void e1000_get_regs(struct net_device *netdev, regs_buff[11] = er32(TIDV); regs_buff[12] = adapter->hw.phy.type; /* PHY type (IGP=1, M88=0) */ + + /* ethtool doesn't use anything past this point, so all this + * code is likely legacy junk for apps that may or may not + * exist */ if (hw->phy.type == e1000_phy_m88) { e1e_rphy(hw, M88E1000_PHY_SPEC_STATUS, &phy_data); regs_buff[13] = (u32)phy_data; /* cable length */ @@ -447,7 +451,7 @@ static void e1000_get_regs(struct net_device *netdev, regs_buff[22] = adapter->phy_stats.receive_errors; regs_buff[23] = regs_buff[13]; /* mdix mode */ } - regs_buff[21] = adapter->phy_stats.idle_errors; /* phy idle errors */ + regs_buff[21] = 0; /* was idle_errors */ e1e_rphy(hw, PHY_1000T_STATUS, &phy_data); regs_buff[24] = (u32)phy_data; /* phy local receiver status */ regs_buff[25] = regs_buff[24]; /* phy remote receiver status */ diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c index 803545b2fc8c..835b692e4fe3 100644 --- a/drivers/net/e1000e/netdev.c +++ b/drivers/net/e1000e/netdev.c @@ -2954,9 +2954,6 @@ void e1000e_update_stats(struct e1000_adapter *adapter) struct e1000_hw *hw = &adapter->hw; struct pci_dev *pdev = adapter->pdev; unsigned long irq_flags; - u16 phy_tmp; - -#define PHY_IDLE_ERROR_COUNT_MASK 0x00FF /* * Prevent stats update while adapter is being reset, or if the pci @@ -3045,15 +3042,6 @@ void e1000e_update_stats(struct e1000_adapter *adapter) /* Tx Dropped needs to be maintained elsewhere */ - /* Phy Stats */ - if (hw->phy.media_type == e1000_media_type_copper) { - if ((adapter->link_speed == SPEED_1000) && - (!e1e_rphy(hw, PHY_1000T_STATUS, &phy_tmp))) { - phy_tmp &= PHY_IDLE_ERROR_COUNT_MASK; - adapter->phy_stats.idle_errors += phy_tmp; - } - } - /* Management Stats */ adapter->stats.mgptc += er32(MGTPTC); adapter->stats.mgprc += er32(MGTPRC); @@ -3073,7 +3061,6 @@ static void e1000_phy_read_status(struct e1000_adapter *adapter) int ret_val; unsigned long irq_flags; - spin_lock_irqsave(&adapter->stats_lock, irq_flags); if ((er32(STATUS) & E1000_STATUS_LU) && -- cgit v1.2.3 From 4fa7553a075918e1e02a6039f9e826c8872b7049 Mon Sep 17 00:00:00 2001 From: Jesse Brandeburg Date: Thu, 2 Oct 2008 16:33:35 -0700 Subject: e1000e: drop stats lock the stats lock is left over from e1000, e1000e no longer has the adjust tbi stats function that required the addition of the stats lock to begin with. adding a mutex to acquire_swflag helped catch this one too. Signed-off-by: Jesse Brandeburg Acked-by: Thomas Gleixner Signed-off-by: Linus Torvalds --- drivers/net/e1000e/e1000.h | 1 - drivers/net/e1000e/netdev.c | 18 ------------------ 2 files changed, 19 deletions(-) diff --git a/drivers/net/e1000e/e1000.h b/drivers/net/e1000e/e1000.h index 8087bda97218..5ea6b60fa377 100644 --- a/drivers/net/e1000e/e1000.h +++ b/drivers/net/e1000e/e1000.h @@ -257,7 +257,6 @@ struct e1000_adapter { struct net_device *netdev; struct pci_dev *pdev; struct net_device_stats net_stats; - spinlock_t stats_lock; /* prevent concurrent stats updates */ /* structs defined in e1000_hw.h */ struct e1000_hw hw; diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c index 835b692e4fe3..01e95580d4ae 100644 --- a/drivers/net/e1000e/netdev.c +++ b/drivers/net/e1000e/netdev.c @@ -2600,8 +2600,6 @@ static int __devinit e1000_sw_init(struct e1000_adapter *adapter) /* Explicitly disable IRQ since the NIC can be in any state. */ e1000_irq_disable(adapter); - spin_lock_init(&adapter->stats_lock); - set_bit(__E1000_DOWN, &adapter->state); return 0; @@ -2953,7 +2951,6 @@ void e1000e_update_stats(struct e1000_adapter *adapter) { struct e1000_hw *hw = &adapter->hw; struct pci_dev *pdev = adapter->pdev; - unsigned long irq_flags; /* * Prevent stats update while adapter is being reset, or if the pci @@ -2964,14 +2961,6 @@ void e1000e_update_stats(struct e1000_adapter *adapter) if (pci_channel_offline(pdev)) return; - spin_lock_irqsave(&adapter->stats_lock, irq_flags); - - /* - * these counters are modified from e1000_adjust_tbi_stats, - * called from the interrupt context, so they must only - * be written while holding adapter->stats_lock - */ - adapter->stats.crcerrs += er32(CRCERRS); adapter->stats.gprc += er32(GPRC); adapter->stats.gorc += er32(GORCL); @@ -3046,8 +3035,6 @@ void e1000e_update_stats(struct e1000_adapter *adapter) adapter->stats.mgptc += er32(MGTPTC); adapter->stats.mgprc += er32(MGTPRC); adapter->stats.mgpdc += er32(MGTPDC); - - spin_unlock_irqrestore(&adapter->stats_lock, irq_flags); } /** @@ -3059,9 +3046,6 @@ static void e1000_phy_read_status(struct e1000_adapter *adapter) struct e1000_hw *hw = &adapter->hw; struct e1000_phy_regs *phy = &adapter->phy_regs; int ret_val; - unsigned long irq_flags; - - spin_lock_irqsave(&adapter->stats_lock, irq_flags); if ((er32(STATUS) & E1000_STATUS_LU) && (adapter->hw.phy.media_type == e1000_media_type_copper)) { @@ -3092,8 +3076,6 @@ static void e1000_phy_read_status(struct e1000_adapter *adapter) phy->stat1000 = 0; phy->estatus = (ESTATUS_1000_TFULL | ESTATUS_1000_THALF); } - - spin_unlock_irqrestore(&adapter->stats_lock, irq_flags); } static void e1000_print_link_info(struct e1000_adapter *adapter) -- cgit v1.2.3 From 717d438d1fde94decef874b9808379d1f4523453 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Thu, 2 Oct 2008 16:33:40 -0700 Subject: e1000e: debug contention on NVM SWFLAG This patch adds a mutex to the e1000e driver that would help catch any collisions of two e1000e threads accessing hardware at the same time. description and patch updated by Jesse Signed-off-by: Thomas Gleixner Signed-off-by: Jesse Brandeburg Signed-off-by: Linus Torvalds --- drivers/net/e1000e/ich8lan.c | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) diff --git a/drivers/net/e1000e/ich8lan.c b/drivers/net/e1000e/ich8lan.c index f4b6744d71df..0b6095ba3ce9 100644 --- a/drivers/net/e1000e/ich8lan.c +++ b/drivers/net/e1000e/ich8lan.c @@ -380,6 +380,9 @@ static s32 e1000_get_variants_ich8lan(struct e1000_adapter *adapter) return 0; } +static DEFINE_MUTEX(nvm_mutex); +static pid_t nvm_owner = -1; + /** * e1000_acquire_swflag_ich8lan - Acquire software control flag * @hw: pointer to the HW structure @@ -393,6 +396,15 @@ static s32 e1000_acquire_swflag_ich8lan(struct e1000_hw *hw) u32 extcnf_ctrl; u32 timeout = PHY_CFG_TIMEOUT; + WARN_ON(preempt_count()); + + if (!mutex_trylock(&nvm_mutex)) { + WARN(1, KERN_ERR "e1000e mutex contention. Owned by pid %d\n", + nvm_owner); + mutex_lock(&nvm_mutex); + } + nvm_owner = current->pid; + while (timeout) { extcnf_ctrl = er32(EXTCNF_CTRL); extcnf_ctrl |= E1000_EXTCNF_CTRL_SWFLAG; @@ -407,6 +419,8 @@ static s32 e1000_acquire_swflag_ich8lan(struct e1000_hw *hw) if (!timeout) { hw_dbg(hw, "FW or HW has locked the resource for too long.\n"); + nvm_owner = -1; + mutex_unlock(&nvm_mutex); return -E1000_ERR_CONFIG; } @@ -428,6 +442,9 @@ static void e1000_release_swflag_ich8lan(struct e1000_hw *hw) extcnf_ctrl = er32(EXTCNF_CTRL); extcnf_ctrl &= ~E1000_EXTCNF_CTRL_SWFLAG; ew32(EXTCNF_CTRL, extcnf_ctrl); + + nvm_owner = -1; + mutex_unlock(&nvm_mutex); } /** -- cgit v1.2.3 From 6f92a6a7ddba5ae7ca0f0255d46410465dcf2ba6 Mon Sep 17 00:00:00 2001 From: Jesse Brandeburg Date: Thu, 2 Oct 2008 16:33:45 -0700 Subject: e1000e: update version from k4 to k6 Signed-off-by: Jesse Brandeburg Signed-off-by: Linus Torvalds --- drivers/net/e1000e/netdev.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c index 01e95580d4ae..b81c4237b5d3 100644 --- a/drivers/net/e1000e/netdev.c +++ b/drivers/net/e1000e/netdev.c @@ -47,7 +47,7 @@ #include "e1000.h" -#define DRV_VERSION "0.3.3.3-k4" +#define DRV_VERSION "0.3.3.3-k6" char e1000e_driver_name[] = "e1000e"; const char e1000e_driver_version[] = DRV_VERSION; -- cgit v1.2.3 From b5ff7df3df9efab511244d5a299fce706c71af48 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Thu, 2 Oct 2008 18:52:51 -0700 Subject: Check mapped ranges on sysfs resource files This is loosely based on a patch by Jesse Barnes to check the user-space PCI mappings though the sysfs interfaces. Quoting Jesse's original explanation: It's fairly common for applications to map PCI resources through sysfs. However, with the current implementation, it's possible for an application to map far more than the range corresponding to the resourceN file it opened. This patch plugs that hole by checking the range at mmap time, similar to what is done on platforms like sparc64 in their lower level PCI remapping routines. It was initially put together to help debug the e1000e NVRAM corruption problem, since we initially thought an X driver might be walking past the end of one of its mappings and clobbering the NVRAM. It now looks like that's not the case, but doing the check is still important for obvious reasons. and this version of the patch differs in that it uses a helper function to clarify the code, and does all the checks in pages (instead of bytes) in order to avoid overflows when doing "<< PAGE_SHIFT" etc. Acked-by: Jesse Barnes Signed-off-by: Linus Torvalds --- drivers/pci/pci-sysfs.c | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) diff --git a/drivers/pci/pci-sysfs.c b/drivers/pci/pci-sysfs.c index 9c718583a237..77baff022f71 100644 --- a/drivers/pci/pci-sysfs.c +++ b/drivers/pci/pci-sysfs.c @@ -16,6 +16,7 @@ #include +#include #include #include #include @@ -484,6 +485,21 @@ pci_mmap_legacy_mem(struct kobject *kobj, struct bin_attribute *attr, #endif /* HAVE_PCI_LEGACY */ #ifdef HAVE_PCI_MMAP + +static int pci_mmap_fits(struct pci_dev *pdev, int resno, struct vm_area_struct *vma) +{ + unsigned long nr, start, size; + + nr = (vma->vm_end - vma->vm_start) >> PAGE_SHIFT; + start = vma->vm_pgoff; + size = pci_resource_len(pdev, resno) >> PAGE_SHIFT; + if (start < size && size - start >= nr) + return 1; + WARN(1, "process \"%s\" tried to map 0x%08lx-0x%08lx on %s BAR %d (size 0x%08lx)\n", + current->comm, start, start+nr, pci_name(pdev), resno, size); + return 0; +} + /** * pci_mmap_resource - map a PCI resource into user memory space * @kobj: kobject for mapping @@ -510,6 +526,9 @@ pci_mmap_resource(struct kobject *kobj, struct bin_attribute *attr, if (i >= PCI_ROM_RESOURCE) return -ENODEV; + if (!pci_mmap_fits(pdev, i, vma)) + return -EINVAL; + /* pci_mmap_page_range() expects the same kind of entry as coming * from /proc/bus/pci/ which is a "user visible" value. If this is * different from the resource itself, arch will do necessary fixup. -- cgit v1.2.3 From 95b866d5afcafee00fc9ad70665e48c86d8c4e0f Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Fri, 3 Oct 2008 09:18:17 -0700 Subject: e1000e: Fix incorrect debug warning Doing 'WARN_ON(preempt_count())' was horribly horribly wrong, and would cause tons of warnings at bootup if PREEMPT was enabled because the initcalls currently run with the kernel lock, which increments the preempt count. At the same time, the warning was also insufficient, since it didn't check that interrupts were enabled. The proper debug function to use for something that can sleep and wants a warning if it's called in the wrong context is 'might_sleep()'. Reported-by: Christian Borntraeger Signed-off-by: Linus Torvalds --- drivers/net/e1000e/ich8lan.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/e1000e/ich8lan.c b/drivers/net/e1000e/ich8lan.c index 0b6095ba3ce9..bcd2bc477af2 100644 --- a/drivers/net/e1000e/ich8lan.c +++ b/drivers/net/e1000e/ich8lan.c @@ -396,7 +396,7 @@ static s32 e1000_acquire_swflag_ich8lan(struct e1000_hw *hw) u32 extcnf_ctrl; u32 timeout = PHY_CFG_TIMEOUT; - WARN_ON(preempt_count()); + might_sleep(); if (!mutex_trylock(&nvm_mutex)) { WARN(1, KERN_ERR "e1000e mutex contention. Owned by pid %d\n", -- cgit v1.2.3 From b7e4226e4f427b59dc8e9c45a2a1a1ed1353a140 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Wed, 1 Oct 2008 21:52:41 +0100 Subject: [MIPS] Build fix: Fix irq flags type Though from a hardware perspective it would be sensible to use only a 32-bit unsigned int type Linux defines interrupt flags to be stored in an unsigned long and nothing else. Signed-off-by: Ralf Baechle --- arch/mips/kernel/ptrace.c | 2 +- arch/mips/kernel/smtc.c | 6 +++--- include/asm-mips/mipsregs.h | 6 +++--- 3 files changed, 7 insertions(+), 7 deletions(-) diff --git a/arch/mips/kernel/ptrace.c b/arch/mips/kernel/ptrace.c index 35234b92b9a5..96ffc9c6d194 100644 --- a/arch/mips/kernel/ptrace.c +++ b/arch/mips/kernel/ptrace.c @@ -238,7 +238,7 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data) case FPC_EIR: { /* implementation / version register */ unsigned int flags; #ifdef CONFIG_MIPS_MT_SMTC - unsigned int irqflags; + unsigned long irqflags; unsigned int mtflags; #endif /* CONFIG_MIPS_MT_SMTC */ diff --git a/arch/mips/kernel/smtc.c b/arch/mips/kernel/smtc.c index a516286532ab..05f2708a9029 100644 --- a/arch/mips/kernel/smtc.c +++ b/arch/mips/kernel/smtc.c @@ -556,7 +556,7 @@ void mipsmt_prepare_cpus(void) void __cpuinit smtc_boot_secondary(int cpu, struct task_struct *idle) { extern u32 kernelsp[NR_CPUS]; - long flags; + unsigned long flags; int mtflags; LOCK_MT_PRA(); @@ -753,7 +753,7 @@ void smtc_send_ipi(int cpu, int type, unsigned int action) { int tcstatus; struct smtc_ipi *pipi; - long flags; + unsigned long flags; int mtflags; if (cpu == smp_processor_id()) { @@ -975,7 +975,7 @@ static irqreturn_t ipi_interrupt(int irq, void *dev_idm) struct smtc_ipi *pipi; unsigned long tcstatus; int sent; - long flags; + unsigned long flags; unsigned int mtflags; unsigned int vpflags; diff --git a/include/asm-mips/mipsregs.h b/include/asm-mips/mipsregs.h index a46f8e258e6b..979866000da4 100644 --- a/include/asm-mips/mipsregs.h +++ b/include/asm-mips/mipsregs.h @@ -1462,7 +1462,7 @@ set_c0_##name(unsigned int set) \ { \ unsigned int res; \ unsigned int omt; \ - unsigned int flags; \ + unsigned long flags; \ \ local_irq_save(flags); \ omt = __dmt(); \ @@ -1480,7 +1480,7 @@ clear_c0_##name(unsigned int clear) \ { \ unsigned int res; \ unsigned int omt; \ - unsigned int flags; \ + unsigned long flags; \ \ local_irq_save(flags); \ omt = __dmt(); \ @@ -1498,7 +1498,7 @@ change_c0_##name(unsigned int change, unsigned int new) \ { \ unsigned int res; \ unsigned int omt; \ - unsigned int flags; \ + unsigned long flags; \ \ local_irq_save(flags); \ \ -- cgit v1.2.3 From 498a863fdfb3e60d2e0e964cd202c2030bda1005 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Wed, 1 Oct 2008 22:23:52 +0100 Subject: [MIPS] SMTC: Build fix: Fix filename in Makefile Signed-off-by: Ralf Baechle --- arch/mips/mti-malta/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/mips/mti-malta/Makefile b/arch/mips/mti-malta/Makefile index 3b7dd722c32a..cef2db8d2225 100644 --- a/arch/mips/mti-malta/Makefile +++ b/arch/mips/mti-malta/Makefile @@ -15,6 +15,6 @@ obj-$(CONFIG_EARLY_PRINTK) += malta-console.o obj-$(CONFIG_PCI) += malta-pci.o # FIXME FIXME FIXME -obj-$(CONFIG_MIPS_MT_SMTC) += malta_smtc.o +obj-$(CONFIG_MIPS_MT_SMTC) += malta-smtc.o EXTRA_CFLAGS += -Werror -- cgit v1.2.3 From 9cc123631b6630948eb5059d218f44424888daa7 Mon Sep 17 00:00:00 2001 From: "Kevin D. Kissell" Date: Tue, 9 Sep 2008 21:33:36 +0200 Subject: [MIPS] SMTC: Fix holes in SMTC and FPU affinity support. Signed-off-by: Kevin D. Kissell Signed-off-by: Ralf Baechle --- arch/mips/kernel/mips-mt-fpaff.c | 2 +- arch/mips/kernel/process.c | 19 +++++++++---------- arch/mips/kernel/traps.c | 6 ++++-- 3 files changed, 14 insertions(+), 13 deletions(-) diff --git a/arch/mips/kernel/mips-mt-fpaff.c b/arch/mips/kernel/mips-mt-fpaff.c index df4d3f2f740c..dc9eb72ed9de 100644 --- a/arch/mips/kernel/mips-mt-fpaff.c +++ b/arch/mips/kernel/mips-mt-fpaff.c @@ -159,7 +159,7 @@ __setup("fpaff=", fpaff_thresh); /* * FPU Use Factor empirically derived from experiments on 34K */ -#define FPUSEFACTOR 333 +#define FPUSEFACTOR 2000 static __init int mt_fp_affinity_init(void) { diff --git a/arch/mips/kernel/process.c b/arch/mips/kernel/process.c index ce7684335a41..22fc19bbe87f 100644 --- a/arch/mips/kernel/process.c +++ b/arch/mips/kernel/process.c @@ -55,7 +55,7 @@ void __noreturn cpu_idle(void) while (1) { tick_nohz_stop_sched_tick(1); while (!need_resched()) { -#ifdef CONFIG_SMTC_IDLE_HOOK_DEBUG +#ifdef CONFIG_MIPS_MT_SMTC extern void smtc_idle_loop_hook(void); smtc_idle_loop_hook(); @@ -145,19 +145,18 @@ int copy_thread(int nr, unsigned long clone_flags, unsigned long usp, */ p->thread.cp0_status = read_c0_status() & ~(ST0_CU2|ST0_CU1); childregs->cp0_status &= ~(ST0_CU2|ST0_CU1); + +#ifdef CONFIG_MIPS_MT_SMTC + /* + * SMTC restores TCStatus after Status, and the CU bits + * are aliased there. + */ + childregs->cp0_tcstatus &= ~(ST0_CU2|ST0_CU1); +#endif clear_tsk_thread_flag(p, TIF_USEDFPU); #ifdef CONFIG_MIPS_MT_FPAFF clear_tsk_thread_flag(p, TIF_FPUBOUND); - - /* - * FPU affinity support is cleaner if we track the - * user-visible CPU affinity from the very beginning. - * The generic cpus_allowed mask will already have - * been copied from the parent before copy_thread - * is invoked. - */ - p->thread.user_cpus_allowed = p->cpus_allowed; #endif /* CONFIG_MIPS_MT_FPAFF */ if (clone_flags & CLONE_SETTLS) diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c index 5fd0cd020af5..b602ac6eb47d 100644 --- a/arch/mips/kernel/traps.c +++ b/arch/mips/kernel/traps.c @@ -825,8 +825,10 @@ static void mt_ase_fp_affinity(void) if (cpus_intersects(current->cpus_allowed, mt_fpu_cpumask)) { cpumask_t tmask; - cpus_and(tmask, current->thread.user_cpus_allowed, - mt_fpu_cpumask); + current->thread.user_cpus_allowed + = current->cpus_allowed; + cpus_and(tmask, current->cpus_allowed, + mt_fpu_cpumask); set_cpus_allowed(current, tmask); set_thread_flag(TIF_FPUBOUND); } -- cgit v1.2.3 From d2bb01b042a38219fbddaafc214c5beb96248d2f Mon Sep 17 00:00:00 2001 From: "Kevin D. Kissell" Date: Tue, 9 Sep 2008 21:35:01 +0200 Subject: [MIPS] SMTC: Close tiny holes in the SMTC IPI replay system. Signed-off-by: Kevin D. Kissell Signed-off-by: Ralf Baechle --- arch/mips/kernel/entry.S | 10 +++--- arch/mips/kernel/smtc.c | 2 +- include/asm-mips/stackframe.h | 72 ++++++++++++++++++++++++++++++++++++------- 3 files changed, 67 insertions(+), 17 deletions(-) diff --git a/arch/mips/kernel/entry.S b/arch/mips/kernel/entry.S index e29598ae939d..ffa331029e08 100644 --- a/arch/mips/kernel/entry.S +++ b/arch/mips/kernel/entry.S @@ -79,11 +79,6 @@ FEXPORT(syscall_exit) FEXPORT(restore_all) # restore full frame #ifdef CONFIG_MIPS_MT_SMTC -/* Detect and execute deferred IPI "interrupts" */ - LONG_L s0, TI_REGS($28) - LONG_S sp, TI_REGS($28) - jal deferred_smtc_ipi - LONG_S s0, TI_REGS($28) #ifdef CONFIG_MIPS_MT_SMTC_IM_BACKSTOP /* Re-arm any temporarily masked interrupts not explicitly "acked" */ mfc0 v0, CP0_TCSTATUS @@ -112,6 +107,11 @@ FEXPORT(restore_all) # restore full frame xor t0, t0, t3 mtc0 t0, CP0_TCCONTEXT #endif /* CONFIG_MIPS_MT_SMTC_IM_BACKSTOP */ +/* Detect and execute deferred IPI "interrupts" */ + LONG_L s0, TI_REGS($28) + LONG_S sp, TI_REGS($28) + jal deferred_smtc_ipi + LONG_S s0, TI_REGS($28) #endif /* CONFIG_MIPS_MT_SMTC */ .set noat RESTORE_TEMP diff --git a/arch/mips/kernel/smtc.c b/arch/mips/kernel/smtc.c index 05f2708a9029..39b491b9ad87 100644 --- a/arch/mips/kernel/smtc.c +++ b/arch/mips/kernel/smtc.c @@ -70,7 +70,7 @@ static atomic_t ipi_timer_latch[NR_CPUS]; #define IPIBUF_PER_CPU 4 -static struct smtc_ipi_q IPIQ[NR_CPUS]; +struct smtc_ipi_q IPIQ[NR_CPUS]; static struct smtc_ipi_q freeIPIq; diff --git a/include/asm-mips/stackframe.h b/include/asm-mips/stackframe.h index 051e1af0bb95..4c37c4e5f72e 100644 --- a/include/asm-mips/stackframe.h +++ b/include/asm-mips/stackframe.h @@ -297,14 +297,31 @@ #ifdef CONFIG_MIPS_MT_SMTC .set mips32r2 /* - * This may not really be necessary if ints are already - * inhibited here. + * We need to make sure the read-modify-write + * of Status below isn't perturbed by an interrupt + * or cross-TC access, so we need to do at least a DMT, + * protected by an interrupt-inhibit. But setting IXMT + * also creates a few-cycle window where an IPI could + * be queued and not be detected before potentially + * returning to a WAIT or user-mode loop. It must be + * replayed. + * + * We're in the middle of a context switch, and + * we can't dispatch it directly without trashing + * some registers, so we'll try to detect this unlikely + * case and program a software interrupt in the VPE, + * as would be done for a cross-VPE IPI. To accomodate + * the handling of that case, we're doing a DVPE instead + * of just a DMT here to protect against other threads. + * This is a lot of cruft to cover a tiny window. + * If you can find a better design, implement it! + * */ mfc0 v0, CP0_TCSTATUS ori v0, TCSTATUS_IXMT mtc0 v0, CP0_TCSTATUS _ehb - DMT 5 # dmt a1 + DVPE 5 # dvpe a1 jal mips_ihb #endif /* CONFIG_MIPS_MT_SMTC */ mfc0 a0, CP0_STATUS @@ -325,17 +342,50 @@ */ LONG_L v1, PT_TCSTATUS(sp) _ehb - mfc0 v0, CP0_TCSTATUS + mfc0 a0, CP0_TCSTATUS andi v1, TCSTATUS_IXMT - /* We know that TCStatua.IXMT should be set from above */ - xori v0, v0, TCSTATUS_IXMT - or v0, v0, v1 - mtc0 v0, CP0_TCSTATUS - _ehb - andi a1, a1, VPECONTROL_TE + bnez v1, 0f + +/* + * We'd like to detect any IPIs queued in the tiny window + * above and request an software interrupt to service them + * when we ERET. + * + * Computing the offset into the IPIQ array of the executing + * TC's IPI queue in-line would be tedious. We use part of + * the TCContext register to hold 16 bits of offset that we + * can add in-line to find the queue head. + */ + mfc0 v0, CP0_TCCONTEXT + la a2, IPIQ + srl v0, v0, 16 + addu a2, a2, v0 + LONG_L v0, 0(a2) + beqz v0, 0f +/* + * If we have a queue, provoke dispatch within the VPE by setting C_SW1 + */ + mfc0 v0, CP0_CAUSE + ori v0, v0, C_SW1 + mtc0 v0, CP0_CAUSE +0: + /* + * This test should really never branch but + * let's be prudent here. Having atomized + * the shared register modifications, we can + * now EVPE, and must do so before interrupts + * are potentially re-enabled. + */ + andi a1, a1, MVPCONTROL_EVP beqz a1, 1f - emt + evpe 1: + /* We know that TCStatua.IXMT should be set from above */ + xori a0, a0, TCSTATUS_IXMT + or a0, a0, v1 + mtc0 a0, CP0_TCSTATUS + _ehb + .set mips0 #endif /* CONFIG_MIPS_MT_SMTC */ LONG_L v1, PT_EPC(sp) -- cgit v1.2.3 From 8531a35e5e275b17c57c39b7911bc2b37025f28c Mon Sep 17 00:00:00 2001 From: "Kevin D. Kissell" Date: Tue, 9 Sep 2008 21:48:52 +0200 Subject: [MIPS] SMTC: Fix SMTC dyntick support. Rework of SMTC support to make it work with the new clock event system, allowing "tickless" operation, and to make it compatible with the use of the "wait_irqoff" idle loop. The new clocking scheme means that the previously optional IPI instant replay mechanism is now required, and has been made more robust. Signed-off-by: Kevin D. Kissell Signed-off-by: Ralf Baechle --- arch/mips/Kconfig | 26 +--- arch/mips/kernel/Makefile | 1 + arch/mips/kernel/cevt-r4k.c | 173 ++++++--------------- arch/mips/kernel/cevt-smtc.c | 321 +++++++++++++++++++++++++++++++++++++++ arch/mips/kernel/cpu-probe.c | 10 +- arch/mips/kernel/genex.S | 4 +- arch/mips/kernel/smtc.c | 252 +++++++++++++++--------------- arch/mips/mti-malta/malta-smtc.c | 9 +- include/asm-mips/cevt-r4k.h | 46 ++++++ include/asm-mips/irqflags.h | 26 +++- include/asm-mips/smtc.h | 8 +- 11 files changed, 597 insertions(+), 279 deletions(-) create mode 100644 arch/mips/kernel/cevt-smtc.c create mode 100644 include/asm-mips/cevt-r4k.h diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 49896a2a1d72..c930b8ceb418 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -1403,7 +1403,6 @@ config MIPS_MT_SMTC depends on CPU_MIPS32_R2 #depends on CPU_MIPS64_R2 # once there is hardware ... depends on SYS_SUPPORTS_MULTITHREADING - select GENERIC_CLOCKEVENTS_BROADCAST select CPU_MIPSR2_IRQ_VI select CPU_MIPSR2_IRQ_EI select MIPS_MT @@ -1451,32 +1450,17 @@ config MIPS_VPE_LOADER Includes a loader for loading an elf relocatable object onto another VPE and running it. -config MIPS_MT_SMTC_INSTANT_REPLAY - bool "Low-latency Dispatch of Deferred SMTC IPIs" - depends on MIPS_MT_SMTC && !PREEMPT - default y - help - SMTC pseudo-interrupts between TCs are deferred and queued - if the target TC is interrupt-inhibited (IXMT). In the first - SMTC prototypes, these queued IPIs were serviced on return - to user mode, or on entry into the kernel idle loop. The - INSTANT_REPLAY option dispatches them as part of local_irq_restore() - processing, which adds runtime overhead (hence the option to turn - it off), but ensures that IPIs are handled promptly even under - heavy I/O interrupt load. - config MIPS_MT_SMTC_IM_BACKSTOP bool "Use per-TC register bits as backstop for inhibited IM bits" depends on MIPS_MT_SMTC - default y + default n help To support multiple TC microthreads acting as "CPUs" within a VPE, VPE-wide interrupt mask bits must be specially manipulated during interrupt handling. To support legacy drivers and interrupt controller management code, SMTC has a "backstop" to track and if necessary restore the interrupt mask. This has some performance - impact on interrupt service overhead. Disable it only if you know - what you are doing. + impact on interrupt service overhead. config MIPS_MT_SMTC_IRQAFF bool "Support IRQ affinity API" @@ -1486,10 +1470,8 @@ config MIPS_MT_SMTC_IRQAFF Enables SMP IRQ affinity API (/proc/irq/*/smp_affinity, etc.) for SMTC Linux kernel. Requires platform support, of which an example can be found in the MIPS kernel i8259 and Malta - platform code. It is recommended that MIPS_MT_SMTC_INSTANT_REPLAY - be enabled if MIPS_MT_SMTC_IRQAFF is used. Adds overhead to - interrupt dispatch, and should be used only if you know what - you are doing. + platform code. Adds some overhead to interrupt dispatch, and + should be used only if you know what you are doing. config MIPS_VPE_LOADER_TOM bool "Load VPE program into memory hidden from linux" diff --git a/arch/mips/kernel/Makefile b/arch/mips/kernel/Makefile index 706f93974797..25775cb54000 100644 --- a/arch/mips/kernel/Makefile +++ b/arch/mips/kernel/Makefile @@ -10,6 +10,7 @@ obj-y += cpu-probe.o branch.o entry.o genex.o irq.o process.o \ obj-$(CONFIG_CEVT_BCM1480) += cevt-bcm1480.o obj-$(CONFIG_CEVT_R4K) += cevt-r4k.o +obj-$(CONFIG_MIPS_MT_SMTC) += cevt-smtc.o obj-$(CONFIG_CEVT_DS1287) += cevt-ds1287.o obj-$(CONFIG_CEVT_GT641XX) += cevt-gt641xx.o obj-$(CONFIG_CEVT_SB1250) += cevt-sb1250.o diff --git a/arch/mips/kernel/cevt-r4k.c b/arch/mips/kernel/cevt-r4k.c index 24a2d907aa0d..4a4c59f2737a 100644 --- a/arch/mips/kernel/cevt-r4k.c +++ b/arch/mips/kernel/cevt-r4k.c @@ -12,6 +12,14 @@ #include #include +#include + +/* + * The SMTC Kernel for the 34K, 1004K, et. al. replaces several + * of these routines with SMTC-specific variants. + */ + +#ifndef CONFIG_MIPS_MT_SMTC static int mips_next_event(unsigned long delta, struct clock_event_device *evt) @@ -19,60 +27,27 @@ static int mips_next_event(unsigned long delta, unsigned int cnt; int res; -#ifdef CONFIG_MIPS_MT_SMTC - { - unsigned long flags, vpflags; - local_irq_save(flags); - vpflags = dvpe(); -#endif cnt = read_c0_count(); cnt += delta; write_c0_compare(cnt); res = ((int)(read_c0_count() - cnt) > 0) ? -ETIME : 0; -#ifdef CONFIG_MIPS_MT_SMTC - evpe(vpflags); - local_irq_restore(flags); - } -#endif return res; } -static void mips_set_mode(enum clock_event_mode mode, - struct clock_event_device *evt) +#endif /* CONFIG_MIPS_MT_SMTC */ + +void mips_set_clock_mode(enum clock_event_mode mode, + struct clock_event_device *evt) { /* Nothing to do ... */ } -static DEFINE_PER_CPU(struct clock_event_device, mips_clockevent_device); -static int cp0_timer_irq_installed; +DEFINE_PER_CPU(struct clock_event_device, mips_clockevent_device); +int cp0_timer_irq_installed; -/* - * Timer ack for an R4k-compatible timer of a known frequency. - */ -static void c0_timer_ack(void) -{ - write_c0_compare(read_c0_compare()); -} +#ifndef CONFIG_MIPS_MT_SMTC -/* - * Possibly handle a performance counter interrupt. - * Return true if the timer interrupt should not be checked - */ -static inline int handle_perf_irq(int r2) -{ - /* - * The performance counter overflow interrupt may be shared with the - * timer interrupt (cp0_perfcount_irq < 0). If it is and a - * performance counter has overflowed (perf_irq() == IRQ_HANDLED) - * and we can't reliably determine if a counter interrupt has also - * happened (!r2) then don't check for a timer interrupt. - */ - return (cp0_perfcount_irq < 0) && - perf_irq() == IRQ_HANDLED && - !r2; -} - -static irqreturn_t c0_compare_interrupt(int irq, void *dev_id) +irqreturn_t c0_compare_interrupt(int irq, void *dev_id) { const int r2 = cpu_has_mips_r2; struct clock_event_device *cd; @@ -93,12 +68,8 @@ static irqreturn_t c0_compare_interrupt(int irq, void *dev_id) * interrupt. Being the paranoiacs we are we check anyway. */ if (!r2 || (read_c0_cause() & (1 << 30))) { - c0_timer_ack(); -#ifdef CONFIG_MIPS_MT_SMTC - if (cpu_data[cpu].vpe_id) - goto out; - cpu = 0; -#endif + /* Clear Count/Compare Interrupt */ + write_c0_compare(read_c0_compare()); cd = &per_cpu(mips_clockevent_device, cpu); cd->event_handler(cd); } @@ -107,65 +78,16 @@ out: return IRQ_HANDLED; } -static struct irqaction c0_compare_irqaction = { +#endif /* Not CONFIG_MIPS_MT_SMTC */ + +struct irqaction c0_compare_irqaction = { .handler = c0_compare_interrupt, -#ifdef CONFIG_MIPS_MT_SMTC - .flags = IRQF_DISABLED, -#else .flags = IRQF_DISABLED | IRQF_PERCPU, -#endif .name = "timer", }; -#ifdef CONFIG_MIPS_MT_SMTC -DEFINE_PER_CPU(struct clock_event_device, smtc_dummy_clockevent_device); - -static void smtc_set_mode(enum clock_event_mode mode, - struct clock_event_device *evt) -{ -} - -static void mips_broadcast(cpumask_t mask) -{ - unsigned int cpu; - - for_each_cpu_mask(cpu, mask) - smtc_send_ipi(cpu, SMTC_CLOCK_TICK, 0); -} - -static void setup_smtc_dummy_clockevent_device(void) -{ - //uint64_t mips_freq = mips_hpt_^frequency; - unsigned int cpu = smp_processor_id(); - struct clock_event_device *cd; - cd = &per_cpu(smtc_dummy_clockevent_device, cpu); - - cd->name = "SMTC"; - cd->features = CLOCK_EVT_FEAT_DUMMY; - - /* Calculate the min / max delta */ - cd->mult = 0; //div_sc((unsigned long) mips_freq, NSEC_PER_SEC, 32); - cd->shift = 0; //32; - cd->max_delta_ns = 0; //clockevent_delta2ns(0x7fffffff, cd); - cd->min_delta_ns = 0; //clockevent_delta2ns(0x30, cd); - - cd->rating = 200; - cd->irq = 17; //-1; -// if (cpu) -// cd->cpumask = CPU_MASK_ALL; // cpumask_of_cpu(cpu); -// else - cd->cpumask = cpumask_of_cpu(cpu); - - cd->set_mode = smtc_set_mode; - - cd->broadcast = mips_broadcast; - - clockevents_register_device(cd); -} -#endif - -static void mips_event_handler(struct clock_event_device *dev) +void mips_event_handler(struct clock_event_device *dev) { } @@ -177,7 +99,23 @@ static int c0_compare_int_pending(void) return (read_c0_cause() >> cp0_compare_irq) & 0x100; } -static int c0_compare_int_usable(void) +/* + * Compare interrupt can be routed and latched outside the core, + * so a single execution hazard barrier may not be enough to give + * it time to clear as seen in the Cause register. 4 time the + * pipeline depth seems reasonably conservative, and empirically + * works better in configurations with high CPU/bus clock ratios. + */ + +#define compare_change_hazard() \ + do { \ + irq_disable_hazard(); \ + irq_disable_hazard(); \ + irq_disable_hazard(); \ + irq_disable_hazard(); \ + } while (0) + +int c0_compare_int_usable(void) { unsigned int delta; unsigned int cnt; @@ -187,7 +125,7 @@ static int c0_compare_int_usable(void) */ if (c0_compare_int_pending()) { write_c0_compare(read_c0_count()); - irq_disable_hazard(); + compare_change_hazard(); if (c0_compare_int_pending()) return 0; } @@ -196,7 +134,7 @@ static int c0_compare_int_usable(void) cnt = read_c0_count(); cnt += delta; write_c0_compare(cnt); - irq_disable_hazard(); + compare_change_hazard(); if ((int)(read_c0_count() - cnt) < 0) break; /* increase delta if the timer was already expired */ @@ -205,11 +143,12 @@ static int c0_compare_int_usable(void) while ((int)(read_c0_count() - cnt) <= 0) ; /* Wait for expiry */ + compare_change_hazard(); if (!c0_compare_int_pending()) return 0; write_c0_compare(read_c0_count()); - irq_disable_hazard(); + compare_change_hazard(); if (c0_compare_int_pending()) return 0; @@ -219,6 +158,8 @@ static int c0_compare_int_usable(void) return 1; } +#ifndef CONFIG_MIPS_MT_SMTC + int __cpuinit mips_clockevent_init(void) { uint64_t mips_freq = mips_hpt_frequency; @@ -229,17 +170,6 @@ int __cpuinit mips_clockevent_init(void) if (!cpu_has_counter || !mips_hpt_frequency) return -ENXIO; -#ifdef CONFIG_MIPS_MT_SMTC - setup_smtc_dummy_clockevent_device(); - - /* - * On SMTC we only register VPE0's compare interrupt as clockevent - * device. - */ - if (cpu) - return 0; -#endif - if (!c0_compare_int_usable()) return -ENXIO; @@ -265,13 +195,9 @@ int __cpuinit mips_clockevent_init(void) cd->rating = 300; cd->irq = irq; -#ifdef CONFIG_MIPS_MT_SMTC - cd->cpumask = CPU_MASK_ALL; -#else cd->cpumask = cpumask_of_cpu(cpu); -#endif cd->set_next_event = mips_next_event; - cd->set_mode = mips_set_mode; + cd->set_mode = mips_set_clock_mode; cd->event_handler = mips_event_handler; clockevents_register_device(cd); @@ -281,12 +207,9 @@ int __cpuinit mips_clockevent_init(void) cp0_timer_irq_installed = 1; -#ifdef CONFIG_MIPS_MT_SMTC -#define CPUCTR_IMASKBIT (0x100 << cp0_compare_irq) - setup_irq_smtc(irq, &c0_compare_irqaction, CPUCTR_IMASKBIT); -#else setup_irq(irq, &c0_compare_irqaction); -#endif return 0; } + +#endif /* Not CONFIG_MIPS_MT_SMTC */ diff --git a/arch/mips/kernel/cevt-smtc.c b/arch/mips/kernel/cevt-smtc.c new file mode 100644 index 000000000000..5162fe4b5952 --- /dev/null +++ b/arch/mips/kernel/cevt-smtc.c @@ -0,0 +1,321 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2007 MIPS Technologies, Inc. + * Copyright (C) 2007 Ralf Baechle + * Copyright (C) 2008 Kevin D. Kissell, Paralogos sarl + */ +#include +#include +#include + +#include +#include +#include + +/* + * Variant clock event timer support for SMTC on MIPS 34K, 1004K + * or other MIPS MT cores. + * + * Notes on SMTC Support: + * + * SMTC has multiple microthread TCs pretending to be Linux CPUs. + * But there's only one Count/Compare pair per VPE, and Compare + * interrupts are taken opportunisitically by available TCs + * bound to the VPE with the Count register. The new timer + * framework provides for global broadcasts, but we really + * want VPE-level multicasts for best behavior. So instead + * of invoking the high-level clock-event broadcast code, + * this version of SMTC support uses the historical SMTC + * multicast mechanisms "under the hood", appearing to the + * generic clock layer as if the interrupts are per-CPU. + * + * The approach taken here is to maintain a set of NR_CPUS + * virtual timers, and track which "CPU" needs to be alerted + * at each event. + * + * It's unlikely that we'll see a MIPS MT core with more than + * 2 VPEs, but we *know* that we won't need to handle more + * VPEs than we have "CPUs". So NCPUs arrays of NCPUs elements + * is always going to be overkill, but always going to be enough. + */ + +unsigned long smtc_nexttime[NR_CPUS][NR_CPUS]; +static int smtc_nextinvpe[NR_CPUS]; + +/* + * Timestamps stored are absolute values to be programmed + * into Count register. Valid timestamps will never be zero. + * If a Zero Count value is actually calculated, it is converted + * to be a 1, which will introduce 1 or two CPU cycles of error + * roughly once every four billion events, which at 1000 HZ means + * about once every 50 days. If that's actually a problem, one + * could alternate squashing 0 to 1 and to -1. + */ + +#define MAKEVALID(x) (((x) == 0L) ? 1L : (x)) +#define ISVALID(x) ((x) != 0L) + +/* + * Time comparison is subtle, as it's really truncated + * modular arithmetic. + */ + +#define IS_SOONER(a, b, reference) \ + (((a) - (unsigned long)(reference)) < ((b) - (unsigned long)(reference))) + +/* + * CATCHUP_INCREMENT, used when the function falls behind the counter. + * Could be an increasing function instead of a constant; + */ + +#define CATCHUP_INCREMENT 64 + +static int mips_next_event(unsigned long delta, + struct clock_event_device *evt) +{ + unsigned long flags; + unsigned int mtflags; + unsigned long timestamp, reference, previous; + unsigned long nextcomp = 0L; + int vpe = current_cpu_data.vpe_id; + int cpu = smp_processor_id(); + local_irq_save(flags); + mtflags = dmt(); + + /* + * Maintain the per-TC virtual timer + * and program the per-VPE shared Count register + * as appropriate here... + */ + reference = (unsigned long)read_c0_count(); + timestamp = MAKEVALID(reference + delta); + /* + * To really model the clock, we have to catch the case + * where the current next-in-VPE timestamp is the old + * timestamp for the calling CPE, but the new value is + * in fact later. In that case, we have to do a full + * scan and discover the new next-in-VPE CPU id and + * timestamp. + */ + previous = smtc_nexttime[vpe][cpu]; + if (cpu == smtc_nextinvpe[vpe] && ISVALID(previous) + && IS_SOONER(previous, timestamp, reference)) { + int i; + int soonest = cpu; + + /* + * Update timestamp array here, so that new + * value gets considered along with those of + * other virtual CPUs on the VPE. + */ + smtc_nexttime[vpe][cpu] = timestamp; + for_each_online_cpu(i) { + if (ISVALID(smtc_nexttime[vpe][i]) + && IS_SOONER(smtc_nexttime[vpe][i], + smtc_nexttime[vpe][soonest], reference)) { + soonest = i; + } + } + smtc_nextinvpe[vpe] = soonest; + nextcomp = smtc_nexttime[vpe][soonest]; + /* + * Otherwise, we don't have to process the whole array rank, + * we just have to see if the event horizon has gotten closer. + */ + } else { + if (!ISVALID(smtc_nexttime[vpe][smtc_nextinvpe[vpe]]) || + IS_SOONER(timestamp, + smtc_nexttime[vpe][smtc_nextinvpe[vpe]], reference)) { + smtc_nextinvpe[vpe] = cpu; + nextcomp = timestamp; + } + /* + * Since next-in-VPE may me the same as the executing + * virtual CPU, we update the array *after* checking + * its value. + */ + smtc_nexttime[vpe][cpu] = timestamp; + } + + /* + * It may be that, in fact, we don't need to update Compare, + * but if we do, we want to make sure we didn't fall into + * a crack just behind Count. + */ + if (ISVALID(nextcomp)) { + write_c0_compare(nextcomp); + ehb(); + /* + * We never return an error, we just make sure + * that we trigger the handlers as quickly as + * we can if we fell behind. + */ + while ((nextcomp - (unsigned long)read_c0_count()) + > (unsigned long)LONG_MAX) { + nextcomp += CATCHUP_INCREMENT; + write_c0_compare(nextcomp); + ehb(); + } + } + emt(mtflags); + local_irq_restore(flags); + return 0; +} + + +void smtc_distribute_timer(int vpe) +{ + unsigned long flags; + unsigned int mtflags; + int cpu; + struct clock_event_device *cd; + unsigned long nextstamp = 0L; + unsigned long reference; + + +repeat: + for_each_online_cpu(cpu) { + /* + * Find virtual CPUs within the current VPE who have + * unserviced timer requests whose time is now past. + */ + local_irq_save(flags); + mtflags = dmt(); + if (cpu_data[cpu].vpe_id == vpe && + ISVALID(smtc_nexttime[vpe][cpu])) { + reference = (unsigned long)read_c0_count(); + if ((smtc_nexttime[vpe][cpu] - reference) + > (unsigned long)LONG_MAX) { + smtc_nexttime[vpe][cpu] = 0L; + emt(mtflags); + local_irq_restore(flags); + /* + * We don't send IPIs to ourself. + */ + if (cpu != smp_processor_id()) { + smtc_send_ipi(cpu, SMTC_CLOCK_TICK, 0); + } else { + cd = &per_cpu(mips_clockevent_device, cpu); + cd->event_handler(cd); + } + } else { + /* Local to VPE but Valid Time not yet reached. */ + if (!ISVALID(nextstamp) || + IS_SOONER(smtc_nexttime[vpe][cpu], nextstamp, + reference)) { + smtc_nextinvpe[vpe] = cpu; + nextstamp = smtc_nexttime[vpe][cpu]; + } + emt(mtflags); + local_irq_restore(flags); + } + } else { + emt(mtflags); + local_irq_restore(flags); + + } + } + /* Reprogram for interrupt at next soonest timestamp for VPE */ + if (ISVALID(nextstamp)) { + write_c0_compare(nextstamp); + ehb(); + if ((nextstamp - (unsigned long)read_c0_count()) + > (unsigned long)LONG_MAX) + goto repeat; + } +} + + +irqreturn_t c0_compare_interrupt(int irq, void *dev_id) +{ + int cpu = smp_processor_id(); + + /* If we're running SMTC, we've got MIPS MT and therefore MIPS32R2 */ + handle_perf_irq(1); + + if (read_c0_cause() & (1 << 30)) { + /* Clear Count/Compare Interrupt */ + write_c0_compare(read_c0_compare()); + smtc_distribute_timer(cpu_data[cpu].vpe_id); + } + return IRQ_HANDLED; +} + + +int __cpuinit mips_clockevent_init(void) +{ + uint64_t mips_freq = mips_hpt_frequency; + unsigned int cpu = smp_processor_id(); + struct clock_event_device *cd; + unsigned int irq; + int i; + int j; + + if (!cpu_has_counter || !mips_hpt_frequency) + return -ENXIO; + if (cpu == 0) { + for (i = 0; i < num_possible_cpus(); i++) { + smtc_nextinvpe[i] = 0; + for (j = 0; j < num_possible_cpus(); j++) + smtc_nexttime[i][j] = 0L; + } + /* + * SMTC also can't have the usablility test + * run by secondary TCs once Compare is in use. + */ + if (!c0_compare_int_usable()) + return -ENXIO; + } + + /* + * With vectored interrupts things are getting platform specific. + * get_c0_compare_int is a hook to allow a platform to return the + * interrupt number of it's liking. + */ + irq = MIPS_CPU_IRQ_BASE + cp0_compare_irq; + if (get_c0_compare_int) + irq = get_c0_compare_int(); + + cd = &per_cpu(mips_clockevent_device, cpu); + + cd->name = "MIPS"; + cd->features = CLOCK_EVT_FEAT_ONESHOT; + + /* Calculate the min / max delta */ + cd->mult = div_sc((unsigned long) mips_freq, NSEC_PER_SEC, 32); + cd->shift = 32; + cd->max_delta_ns = clockevent_delta2ns(0x7fffffff, cd); + cd->min_delta_ns = clockevent_delta2ns(0x300, cd); + + cd->rating = 300; + cd->irq = irq; + cd->cpumask = cpumask_of_cpu(cpu); + cd->set_next_event = mips_next_event; + cd->set_mode = mips_set_clock_mode; + cd->event_handler = mips_event_handler; + + clockevents_register_device(cd); + + /* + * On SMTC we only want to do the data structure + * initialization and IRQ setup once. + */ + if (cpu) + return 0; + /* + * And we need the hwmask associated with the c0_compare + * vector to be initialized. + */ + irq_hwmask[irq] = (0x100 << cp0_compare_irq); + if (cp0_timer_irq_installed) + return 0; + + cp0_timer_irq_installed = 1; + + setup_irq(irq, &c0_compare_irqaction); + + return 0; +} diff --git a/arch/mips/kernel/cpu-probe.c b/arch/mips/kernel/cpu-probe.c index 11c92dc53791..e621fda8ab37 100644 --- a/arch/mips/kernel/cpu-probe.c +++ b/arch/mips/kernel/cpu-probe.c @@ -54,14 +54,18 @@ extern void r4k_wait(void); * interrupt is requested" restriction in the MIPS32/MIPS64 architecture makes * using this version a gamble. */ -static void r4k_wait_irqoff(void) +void r4k_wait_irqoff(void) { local_irq_disable(); if (!need_resched()) - __asm__(" .set mips3 \n" + __asm__(" .set push \n" + " .set mips3 \n" " wait \n" - " .set mips0 \n"); + " .set pop \n"); local_irq_enable(); + __asm__(" .globl __pastwait \n" + "__pastwait: \n"); + return; } /* diff --git a/arch/mips/kernel/genex.S b/arch/mips/kernel/genex.S index f886dd7f708e..01dcbe38fa01 100644 --- a/arch/mips/kernel/genex.S +++ b/arch/mips/kernel/genex.S @@ -282,8 +282,8 @@ NESTED(except_vec_vi_handler, 0, sp) and t0, a0, t1 #ifdef CONFIG_MIPS_MT_SMTC_IM_BACKSTOP mfc0 t2, CP0_TCCONTEXT - or t0, t0, t2 - mtc0 t0, CP0_TCCONTEXT + or t2, t0, t2 + mtc0 t2, CP0_TCCONTEXT #endif /* CONFIG_MIPS_MT_SMTC_IM_BACKSTOP */ xor t1, t1, t0 mtc0 t1, CP0_STATUS diff --git a/arch/mips/kernel/smtc.c b/arch/mips/kernel/smtc.c index 39b491b9ad87..897fb2b4751c 100644 --- a/arch/mips/kernel/smtc.c +++ b/arch/mips/kernel/smtc.c @@ -1,4 +1,21 @@ -/* Copyright (C) 2004 Mips Technologies, Inc */ +/* + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + * Copyright (C) 2004 Mips Technologies, Inc + * Copyright (C) 2008 Kevin D. Kissell + */ #include #include @@ -21,7 +38,6 @@ #include #include #include -#include #include /* @@ -58,11 +74,6 @@ unsigned long irq_hwmask[NR_IRQS]; asiduse smtc_live_asid[MAX_SMTC_TLBS][MAX_SMTC_ASIDS]; -/* - * Clock interrupt "latch" buffers, per "CPU" - */ - -static atomic_t ipi_timer_latch[NR_CPUS]; /* * Number of InterProcessor Interrupt (IPI) message buffers to allocate @@ -282,7 +293,7 @@ static void smtc_configure_tlb(void) * phys_cpu_present_map and the logical/physical mappings. */ -int __init mipsmt_build_cpu_map(int start_cpu_slot) +int __init smtc_build_cpu_map(int start_cpu_slot) { int i, ntcs; @@ -325,7 +336,12 @@ static void smtc_tc_setup(int vpe, int tc, int cpu) write_tc_c0_tcstatus((read_tc_c0_tcstatus() & ~(TCSTATUS_TKSU | TCSTATUS_DA | TCSTATUS_IXMT)) | TCSTATUS_A); - write_tc_c0_tccontext(0); + /* + * TCContext gets an offset from the base of the IPIQ array + * to be used in low-level code to detect the presence of + * an active IPI queue + */ + write_tc_c0_tccontext((sizeof(struct smtc_ipi_q) * cpu) << 16); /* Bind tc to vpe */ write_tc_c0_tcbind(vpe); /* In general, all TCs should have the same cpu_data indications */ @@ -336,10 +352,18 @@ static void smtc_tc_setup(int vpe, int tc, int cpu) cpu_data[cpu].options &= ~MIPS_CPU_FPU; cpu_data[cpu].vpe_id = vpe; cpu_data[cpu].tc_id = tc; + /* Multi-core SMTC hasn't been tested, but be prepared */ + cpu_data[cpu].core = (read_vpe_c0_ebase() >> 1) & 0xff; } +/* + * Tweak to get Count registes in as close a sync as possible. + * Value seems good for 34K-class cores. + */ + +#define CP0_SKEW 8 -void mipsmt_prepare_cpus(void) +void smtc_prepare_cpus(int cpus) { int i, vpe, tc, ntc, nvpe, tcpervpe[NR_CPUS], slop, cpu; unsigned long flags; @@ -363,13 +387,13 @@ void mipsmt_prepare_cpus(void) IPIQ[i].head = IPIQ[i].tail = NULL; spin_lock_init(&IPIQ[i].lock); IPIQ[i].depth = 0; - atomic_set(&ipi_timer_latch[i], 0); } /* cpu_data index starts at zero */ cpu = 0; cpu_data[cpu].vpe_id = 0; cpu_data[cpu].tc_id = 0; + cpu_data[cpu].core = (read_c0_ebase() >> 1) & 0xff; cpu++; /* Report on boot-time options */ @@ -484,7 +508,8 @@ void mipsmt_prepare_cpus(void) write_vpe_c0_compare(0); /* Propagate Config7 */ write_vpe_c0_config7(read_c0_config7()); - write_vpe_c0_count(read_c0_count()); + write_vpe_c0_count(read_c0_count() + CP0_SKEW); + ehb(); } /* enable multi-threading within VPE */ write_vpe_c0_vpecontrol(read_vpe_c0_vpecontrol() | VPECONTROL_TE); @@ -585,24 +610,22 @@ void __cpuinit smtc_boot_secondary(int cpu, struct task_struct *idle) void smtc_init_secondary(void) { - /* - * Start timer on secondary VPEs if necessary. - * plat_timer_setup has already have been invoked by init/main - * on "boot" TC. Like per_cpu_trap_init() hack, this assumes that - * SMTC init code assigns TCs consdecutively and in ascending order - * to across available VPEs. - */ - if (((read_c0_tcbind() & TCBIND_CURTC) != 0) && - ((read_c0_tcbind() & TCBIND_CURVPE) - != cpu_data[smp_processor_id() - 1].vpe_id)){ - write_c0_compare(read_c0_count() + mips_hpt_frequency/HZ); - } - local_irq_enable(); } void smtc_smp_finish(void) { + int cpu = smp_processor_id(); + + /* + * Lowest-numbered CPU per VPE starts a clock tick. + * Like per_cpu_trap_init() hack, this assumes that + * SMTC init code assigns TCs consdecutively and + * in ascending order across available VPEs. + */ + if (cpu > 0 && (cpu_data[cpu].vpe_id != cpu_data[cpu - 1].vpe_id)) + write_c0_compare(read_c0_count() + mips_hpt_frequency/HZ); + printk("TC %d going on-line as CPU %d\n", cpu_data[smp_processor_id()].tc_id, smp_processor_id()); } @@ -755,6 +778,8 @@ void smtc_send_ipi(int cpu, int type, unsigned int action) struct smtc_ipi *pipi; unsigned long flags; int mtflags; + unsigned long tcrestart; + extern void r4k_wait_irqoff(void), __pastwait(void); if (cpu == smp_processor_id()) { printk("Cannot Send IPI to self!\n"); @@ -771,8 +796,6 @@ void smtc_send_ipi(int cpu, int type, unsigned int action) pipi->arg = (void *)action; pipi->dest = cpu; if (cpu_data[cpu].vpe_id != cpu_data[smp_processor_id()].vpe_id) { - if (type == SMTC_CLOCK_TICK) - atomic_inc(&ipi_timer_latch[cpu]); /* If not on same VPE, enqueue and send cross-VPE interrupt */ smtc_ipi_nq(&IPIQ[cpu], pipi); LOCK_CORE_PRA(); @@ -800,22 +823,29 @@ void smtc_send_ipi(int cpu, int type, unsigned int action) if ((tcstatus & TCSTATUS_IXMT) != 0) { /* - * Spin-waiting here can deadlock, - * so we queue the message for the target TC. + * If we're in the the irq-off version of the wait + * loop, we need to force exit from the wait and + * do a direct post of the IPI. + */ + if (cpu_wait == r4k_wait_irqoff) { + tcrestart = read_tc_c0_tcrestart(); + if (tcrestart >= (unsigned long)r4k_wait_irqoff + && tcrestart < (unsigned long)__pastwait) { + write_tc_c0_tcrestart(__pastwait); + tcstatus &= ~TCSTATUS_IXMT; + write_tc_c0_tcstatus(tcstatus); + goto postdirect; + } + } + /* + * Otherwise we queue the message for the target TC + * to pick up when he does a local_irq_restore() */ write_tc_c0_tchalt(0); UNLOCK_CORE_PRA(); - /* Try to reduce redundant timer interrupt messages */ - if (type == SMTC_CLOCK_TICK) { - if (atomic_postincrement(&ipi_timer_latch[cpu])!=0){ - smtc_ipi_nq(&freeIPIq, pipi); - return; - } - } smtc_ipi_nq(&IPIQ[cpu], pipi); } else { - if (type == SMTC_CLOCK_TICK) - atomic_inc(&ipi_timer_latch[cpu]); +postdirect: post_direct_ipi(cpu, pipi); write_tc_c0_tchalt(0); UNLOCK_CORE_PRA(); @@ -883,7 +913,7 @@ static void ipi_call_interrupt(void) smp_call_function_interrupt(); } -DECLARE_PER_CPU(struct clock_event_device, smtc_dummy_clockevent_device); +DECLARE_PER_CPU(struct clock_event_device, mips_clockevent_device); void ipi_decode(struct smtc_ipi *pipi) { @@ -891,20 +921,13 @@ void ipi_decode(struct smtc_ipi *pipi) struct clock_event_device *cd; void *arg_copy = pipi->arg; int type_copy = pipi->type; - int ticks; - smtc_ipi_nq(&freeIPIq, pipi); switch (type_copy) { case SMTC_CLOCK_TICK: irq_enter(); kstat_this_cpu.irqs[MIPS_CPU_IRQ_BASE + 1]++; - cd = &per_cpu(smtc_dummy_clockevent_device, cpu); - ticks = atomic_read(&ipi_timer_latch[cpu]); - atomic_sub(ticks, &ipi_timer_latch[cpu]); - while (ticks) { - cd->event_handler(cd); - ticks--; - } + cd = &per_cpu(mips_clockevent_device, cpu); + cd->event_handler(cd); irq_exit(); break; @@ -937,24 +960,48 @@ void ipi_decode(struct smtc_ipi *pipi) } } +/* + * Similar to smtc_ipi_replay(), but invoked from context restore, + * so it reuses the current exception frame rather than set up a + * new one with self_ipi. + */ + void deferred_smtc_ipi(void) { - struct smtc_ipi *pipi; - unsigned long flags; -/* DEBUG */ - int q = smp_processor_id(); + int cpu = smp_processor_id(); /* * Test is not atomic, but much faster than a dequeue, * and the vast majority of invocations will have a null queue. + * If irq_disabled when this was called, then any IPIs queued + * after we test last will be taken on the next irq_enable/restore. + * If interrupts were enabled, then any IPIs added after the + * last test will be taken directly. */ - if (IPIQ[q].head != NULL) { - while((pipi = smtc_ipi_dq(&IPIQ[q])) != NULL) { - /* ipi_decode() should be called with interrupts off */ - local_irq_save(flags); + + while (IPIQ[cpu].head != NULL) { + struct smtc_ipi_q *q = &IPIQ[cpu]; + struct smtc_ipi *pipi; + unsigned long flags; + + /* + * It may be possible we'll come in with interrupts + * already enabled. + */ + local_irq_save(flags); + + spin_lock(&q->lock); + pipi = __smtc_ipi_dq(q); + spin_unlock(&q->lock); + if (pipi != NULL) ipi_decode(pipi); - local_irq_restore(flags); - } + /* + * The use of the __raw_local restore isn't + * as obviously necessary here as in smtc_ipi_replay(), + * but it's more efficient, given that we're already + * running down the IPI queue. + */ + __raw_local_irq_restore(flags); } } @@ -1066,55 +1113,53 @@ static void setup_cross_vpe_interrupts(unsigned int nvpe) /* * SMTC-specific hacks invoked from elsewhere in the kernel. - * - * smtc_ipi_replay is called from raw_local_irq_restore which is only ever - * called with interrupts disabled. We do rely on interrupts being disabled - * here because using spin_lock_irqsave()/spin_unlock_irqrestore() would - * result in a recursive call to raw_local_irq_restore(). */ -static void __smtc_ipi_replay(void) + /* + * smtc_ipi_replay is called from raw_local_irq_restore + */ + +void smtc_ipi_replay(void) { unsigned int cpu = smp_processor_id(); /* * To the extent that we've ever turned interrupts off, * we may have accumulated deferred IPIs. This is subtle. - * If we use the smtc_ipi_qdepth() macro, we'll get an - * exact number - but we'll also disable interrupts - * and create a window of failure where a new IPI gets - * queued after we test the depth but before we re-enable - * interrupts. So long as IXMT never gets set, however, * we should be OK: If we pick up something and dispatch * it here, that's great. If we see nothing, but concurrent * with this operation, another TC sends us an IPI, IXMT * is clear, and we'll handle it as a real pseudo-interrupt - * and not a pseudo-pseudo interrupt. + * and not a pseudo-pseudo interrupt. The important thing + * is to do the last check for queued message *after* the + * re-enabling of interrupts. */ - if (IPIQ[cpu].depth > 0) { - while (1) { - struct smtc_ipi_q *q = &IPIQ[cpu]; - struct smtc_ipi *pipi; - extern void self_ipi(struct smtc_ipi *); - - spin_lock(&q->lock); - pipi = __smtc_ipi_dq(q); - spin_unlock(&q->lock); - if (!pipi) - break; + while (IPIQ[cpu].head != NULL) { + struct smtc_ipi_q *q = &IPIQ[cpu]; + struct smtc_ipi *pipi; + unsigned long flags; + /* + * It's just possible we'll come in with interrupts + * already enabled. + */ + local_irq_save(flags); + + spin_lock(&q->lock); + pipi = __smtc_ipi_dq(q); + spin_unlock(&q->lock); + /* + ** But use a raw restore here to avoid recursion. + */ + __raw_local_irq_restore(flags); + + if (pipi) { self_ipi(pipi); smtc_cpu_stats[cpu].selfipis++; } } } -void smtc_ipi_replay(void) -{ - raw_local_irq_disable(); - __smtc_ipi_replay(); -} - EXPORT_SYMBOL(smtc_ipi_replay); void smtc_idle_loop_hook(void) @@ -1193,40 +1238,13 @@ void smtc_idle_loop_hook(void) } } - /* - * Now that we limit outstanding timer IPIs, check for hung TC - */ - for (tc = 0; tc < NR_CPUS; tc++) { - /* Don't check ourself - we'll dequeue IPIs just below */ - if ((tc != smp_processor_id()) && - atomic_read(&ipi_timer_latch[tc]) > timerq_limit) { - if (clock_hang_reported[tc] == 0) { - pdb_msg += sprintf(pdb_msg, - "TC %d looks hung with timer latch at %d\n", - tc, atomic_read(&ipi_timer_latch[tc])); - clock_hang_reported[tc]++; - } - } - } emt(mtflags); local_irq_restore(flags); if (pdb_msg != &id_ho_db_msg[0]) printk("CPU%d: %s", smp_processor_id(), id_ho_db_msg); #endif /* CONFIG_SMTC_IDLE_HOOK_DEBUG */ - /* - * Replay any accumulated deferred IPIs. If "Instant Replay" - * is in use, there should never be any. - */ -#ifndef CONFIG_MIPS_MT_SMTC_INSTANT_REPLAY - { - unsigned long flags; - - local_irq_save(flags); - __smtc_ipi_replay(); - local_irq_restore(flags); - } -#endif /* CONFIG_MIPS_MT_SMTC_INSTANT_REPLAY */ + smtc_ipi_replay(); } void smtc_soft_dump(void) @@ -1242,10 +1260,6 @@ void smtc_soft_dump(void) printk("%d: %ld\n", i, smtc_cpu_stats[i].selfipis); } smtc_ipi_qdump(); - printk("Timer IPI Backlogs:\n"); - for (i=0; i < NR_CPUS; i++) { - printk("%d: %d\n", i, atomic_read(&ipi_timer_latch[i])); - } printk("%d Recoveries of \"stolen\" FPU\n", atomic_read(&smtc_fpu_recoveries)); } diff --git a/arch/mips/mti-malta/malta-smtc.c b/arch/mips/mti-malta/malta-smtc.c index 5ea705e49454..f84a46a8ae6e 100644 --- a/arch/mips/mti-malta/malta-smtc.c +++ b/arch/mips/mti-malta/malta-smtc.c @@ -84,12 +84,17 @@ static void msmtc_cpus_done(void) static void __init msmtc_smp_setup(void) { - mipsmt_build_cpu_map(0); + /* + * we won't get the definitive value until + * we've run smtc_prepare_cpus later, but + * we would appear to need an upper bound now. + */ + smp_num_siblings = smtc_build_cpu_map(0); } static void __init msmtc_prepare_cpus(unsigned int max_cpus) { - mipsmt_prepare_cpus(); + smtc_prepare_cpus(max_cpus); } struct plat_smp_ops msmtc_smp_ops = { diff --git a/include/asm-mips/cevt-r4k.h b/include/asm-mips/cevt-r4k.h new file mode 100644 index 000000000000..fa4328f9124f --- /dev/null +++ b/include/asm-mips/cevt-r4k.h @@ -0,0 +1,46 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2008 Kevin D. Kissell + */ + +/* + * Definitions used for common event timer implementation + * for MIPS 4K-type processors and their MIPS MT variants. + * Avoids unsightly extern declarations in C files. + */ +#ifndef __ASM_CEVT_R4K_H +#define __ASM_CEVT_R4K_H + +DECLARE_PER_CPU(struct clock_event_device, mips_clockevent_device); + +void mips_event_handler(struct clock_event_device *dev); +int c0_compare_int_usable(void); +void mips_set_clock_mode(enum clock_event_mode, struct clock_event_device *); +irqreturn_t c0_compare_interrupt(int, void *); + +extern struct irqaction c0_compare_irqaction; +extern int cp0_timer_irq_installed; + +/* + * Possibly handle a performance counter interrupt. + * Return true if the timer interrupt should not be checked + */ + +static inline int handle_perf_irq(int r2) +{ + /* + * The performance counter overflow interrupt may be shared with the + * timer interrupt (cp0_perfcount_irq < 0). If it is and a + * performance counter has overflowed (perf_irq() == IRQ_HANDLED) + * and we can't reliably determine if a counter interrupt has also + * happened (!r2) then don't check for a timer interrupt. + */ + return (cp0_perfcount_irq < 0) && + perf_irq() == IRQ_HANDLED && + !r2; +} + +#endif /* __ASM_CEVT_R4K_H */ diff --git a/include/asm-mips/irqflags.h b/include/asm-mips/irqflags.h index 881e8866501d..701ec0ba8fa9 100644 --- a/include/asm-mips/irqflags.h +++ b/include/asm-mips/irqflags.h @@ -38,8 +38,17 @@ __asm__( " .set pop \n" " .endm"); +extern void smtc_ipi_replay(void); + static inline void raw_local_irq_enable(void) { +#ifdef CONFIG_MIPS_MT_SMTC + /* + * SMTC kernel needs to do a software replay of queued + * IPIs, at the cost of call overhead on each local_irq_enable() + */ + smtc_ipi_replay(); +#endif __asm__ __volatile__( "raw_local_irq_enable" : /* no outputs */ @@ -47,6 +56,7 @@ static inline void raw_local_irq_enable(void) : "memory"); } + /* * For cli() we have to insert nops to make sure that the new value * has actually arrived in the status register before the end of this @@ -185,15 +195,14 @@ __asm__( " .set pop \n" " .endm \n"); -extern void smtc_ipi_replay(void); static inline void raw_local_irq_restore(unsigned long flags) { unsigned long __tmp1; -#ifdef CONFIG_MIPS_MT_SMTC_INSTANT_REPLAY +#ifdef CONFIG_MIPS_MT_SMTC /* - * CONFIG_MIPS_MT_SMTC_INSTANT_REPLAY does prompt replay of deferred + * SMTC kernel needs to do a software replay of queued * IPIs, at the cost of branch and call overhead on each * local_irq_restore() */ @@ -208,6 +217,17 @@ static inline void raw_local_irq_restore(unsigned long flags) : "memory"); } +static inline void __raw_local_irq_restore(unsigned long flags) +{ + unsigned long __tmp1; + + __asm__ __volatile__( + "raw_local_irq_restore\t%0" + : "=r" (__tmp1) + : "0" (flags) + : "memory"); +} + static inline int raw_irqs_disabled_flags(unsigned long flags) { #ifdef CONFIG_MIPS_MT_SMTC diff --git a/include/asm-mips/smtc.h b/include/asm-mips/smtc.h index 3639b28f80db..ea60bf08dcb0 100644 --- a/include/asm-mips/smtc.h +++ b/include/asm-mips/smtc.h @@ -6,6 +6,7 @@ */ #include +#include /* * System-wide SMTC status information @@ -38,14 +39,15 @@ struct mm_struct; struct task_struct; void smtc_get_new_mmu_context(struct mm_struct *mm, unsigned long cpu); - +void self_ipi(struct smtc_ipi *); void smtc_flush_tlb_asid(unsigned long asid); -extern int mipsmt_build_cpu_map(int startslot); -extern void mipsmt_prepare_cpus(void); +extern int smtc_build_cpu_map(int startslot); +extern void smtc_prepare_cpus(int cpus); extern void smtc_smp_finish(void); extern void smtc_boot_secondary(int cpu, struct task_struct *t); extern void smtc_cpus_done(void); + /* * Sharing the TLB between multiple VPEs means that the * "random" index selection function is not allowed to -- cgit v1.2.3 From d3d238c7744d08c36a114a59cb537d4c0c6c9a86 Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Fri, 3 Oct 2008 21:54:59 +0200 Subject: [S390] nohz: Fix __udelay. This fixes a regression that came with 934b2857cc576ae53c92a66e63fce7ddcfa74691 ("[S390] nohz/sclp: disable timer on synchronous waits."). If udelay() gets called from a disabled context it sets the clock comparator to a value where it expects the next interrupt. When the interrupt happens the clock comparator gets not reset and therefore the interrupt condition doesn't get cleared. The result is an endless timer interrupt loop. In addition this patch fixes also the following: rcutorture reveals that our __udelay implementation is still buggy, since it might schedule tasklets, but prevents their execution: NOHZ: local_softirq_pending 42 NOHZ: local_softirq_pending 02 NOHZ: local_softirq_pending 142 NOHZ: local_softirq_pending 02 To fix this we make sure that only the clock comparator interrupt is enabled when the enabled wait psw is loaded. Also no code gets called anymore which might schedule tasklets. Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- arch/s390/kernel/time.c | 2 ++ arch/s390/lib/delay.c | 88 ++++++++++++++++++++++++++++++------------------- 2 files changed, 56 insertions(+), 34 deletions(-) diff --git a/arch/s390/kernel/time.c b/arch/s390/kernel/time.c index ca114fe46ffb..06acb1a18bbc 100644 --- a/arch/s390/kernel/time.c +++ b/arch/s390/kernel/time.c @@ -169,6 +169,8 @@ void init_cpu_timer(void) static void clock_comparator_interrupt(__u16 code) { + if (S390_lowcore.clock_comparator == -1ULL) + set_clock_comparator(S390_lowcore.clock_comparator); } static void etr_timing_alert(struct etr_irq_parm *); diff --git a/arch/s390/lib/delay.c b/arch/s390/lib/delay.c index fc6ab6094df8..0953cee05efc 100644 --- a/arch/s390/lib/delay.c +++ b/arch/s390/lib/delay.c @@ -1,14 +1,9 @@ /* - * arch/s390/lib/delay.c * Precise Delay Loops for S390 * - * S390 version - * Copyright (C) 1999 IBM Deutschland Entwicklung GmbH, IBM Corporation - * Author(s): Martin Schwidefsky (schwidefsky@de.ibm.com), - * - * Derived from "arch/i386/lib/delay.c" - * Copyright (C) 1993 Linus Torvalds - * Copyright (C) 1997 Martin Mares + * Copyright IBM Corp. 1999,2008 + * Author(s): Martin Schwidefsky , + * Heiko Carstens , */ #include @@ -29,30 +24,31 @@ void __delay(unsigned long loops) asm volatile("0: brct %0,0b" : : "d" ((loops/2) + 1)); } -/* - * Waits for 'usecs' microseconds using the TOD clock comparator. - */ -void __udelay(unsigned long usecs) +static void __udelay_disabled(unsigned long usecs) { - u64 end, time, old_cc = 0; - unsigned long flags, cr0, mask, dummy; - int irq_context; + unsigned long mask, cr0, cr0_saved; + u64 clock_saved; - irq_context = in_interrupt(); - if (!irq_context) - local_bh_disable(); - local_irq_save(flags); - if (raw_irqs_disabled_flags(flags)) { - old_cc = local_tick_disable(); - S390_lowcore.clock_comparator = -1ULL; - __ctl_store(cr0, 0, 0); - dummy = (cr0 & 0xffff00e0) | 0x00000800; - __ctl_load(dummy , 0, 0); - mask = psw_kernel_bits | PSW_MASK_WAIT | PSW_MASK_EXT; - } else - mask = psw_kernel_bits | PSW_MASK_WAIT | - PSW_MASK_EXT | PSW_MASK_IO; + clock_saved = local_tick_disable(); + set_clock_comparator(get_clock() + ((u64) usecs << 12)); + __ctl_store(cr0_saved, 0, 0); + cr0 = (cr0_saved & 0xffff00e0) | 0x00000800; + __ctl_load(cr0 , 0, 0); + mask = psw_kernel_bits | PSW_MASK_WAIT | PSW_MASK_EXT; + trace_hardirqs_on(); + __load_psw_mask(mask); + local_irq_disable(); + __ctl_load(cr0_saved, 0, 0); + local_tick_enable(clock_saved); + set_clock_comparator(S390_lowcore.clock_comparator); +} +static void __udelay_enabled(unsigned long usecs) +{ + unsigned long mask; + u64 end, time; + + mask = psw_kernel_bits | PSW_MASK_WAIT | PSW_MASK_EXT | PSW_MASK_IO; end = get_clock() + ((u64) usecs << 12); do { time = end < S390_lowcore.clock_comparator ? @@ -62,13 +58,37 @@ void __udelay(unsigned long usecs) __load_psw_mask(mask); local_irq_disable(); } while (get_clock() < end); + set_clock_comparator(S390_lowcore.clock_comparator); +} - if (raw_irqs_disabled_flags(flags)) { - __ctl_load(cr0, 0, 0); - local_tick_enable(old_cc); +/* + * Waits for 'usecs' microseconds using the TOD clock comparator. + */ +void __udelay(unsigned long usecs) +{ + unsigned long flags; + + preempt_disable(); + local_irq_save(flags); + if (in_irq()) { + __udelay_disabled(usecs); + goto out; + } + if (in_softirq()) { + if (raw_irqs_disabled_flags(flags)) + __udelay_disabled(usecs); + else + __udelay_enabled(usecs); + goto out; } - if (!irq_context) + if (raw_irqs_disabled_flags(flags)) { + local_bh_disable(); + __udelay_disabled(usecs); _local_bh_enable(); - set_clock_comparator(S390_lowcore.clock_comparator); + goto out; + } + __udelay_enabled(usecs); +out: local_irq_restore(flags); + preempt_enable(); } -- cgit v1.2.3 From 75f6276187e5ce5a312a0619fba2fe56c9290b48 Mon Sep 17 00:00:00 2001 From: Jan Glauber Date: Fri, 3 Oct 2008 21:55:00 +0200 Subject: [S390] qdio: prevent stack clobber Don't print more information than fits into the string on the stack. Combine the informational output of qdio to fit into one line. Signed-off-by: Jan Glauber Signed-off-by: Martin Schwidefsky --- drivers/s390/cio/qdio_setup.c | 55 ++++++++++++++++--------------------------- 1 file changed, 20 insertions(+), 35 deletions(-) diff --git a/drivers/s390/cio/qdio_setup.c b/drivers/s390/cio/qdio_setup.c index 1679e2f91c94..a0b6b46e7466 100644 --- a/drivers/s390/cio/qdio_setup.c +++ b/drivers/s390/cio/qdio_setup.c @@ -447,51 +447,36 @@ void qdio_print_subchannel_info(struct qdio_irq *irq_ptr, { char s[80]; - sprintf(s, "%s sc:%x ", cdev->dev.bus_id, irq_ptr->schid.sch_no); - + sprintf(s, "qdio: %s ", dev_name(&cdev->dev)); switch (irq_ptr->qib.qfmt) { case QDIO_QETH_QFMT: - sprintf(s + strlen(s), "OSADE "); + sprintf(s + strlen(s), "OSA "); break; case QDIO_ZFCP_QFMT: sprintf(s + strlen(s), "ZFCP "); break; case QDIO_IQDIO_QFMT: - sprintf(s + strlen(s), "HiperSockets "); + sprintf(s + strlen(s), "HS "); break; } - sprintf(s + strlen(s), "using: "); - - if (!is_thinint_irq(irq_ptr)) - sprintf(s + strlen(s), "no"); - sprintf(s + strlen(s), "AdapterInterrupts "); - if (!(irq_ptr->sch_token != 0)) - sprintf(s + strlen(s), "no"); - sprintf(s + strlen(s), "QEBSM "); - if (!(irq_ptr->qib.ac & QIB_AC_OUTBOUND_PCI_SUPPORTED)) - sprintf(s + strlen(s), "no"); - sprintf(s + strlen(s), "OutboundPCI "); - if (!css_general_characteristics.aif_tdd) - sprintf(s + strlen(s), "no"); - sprintf(s + strlen(s), "TDD\n"); - printk(KERN_INFO "qdio: %s", s); - - memset(s, 0, sizeof(s)); - sprintf(s, "%s SIGA required: ", cdev->dev.bus_id); - if (irq_ptr->siga_flag.input) - sprintf(s + strlen(s), "Read "); - if (irq_ptr->siga_flag.output) - sprintf(s + strlen(s), "Write "); - if (irq_ptr->siga_flag.sync) - sprintf(s + strlen(s), "Sync "); - if (!irq_ptr->siga_flag.no_sync_ti) - sprintf(s + strlen(s), "SyncAI "); - if (!irq_ptr->siga_flag.no_sync_out_ti) - sprintf(s + strlen(s), "SyncOutAI "); - if (!irq_ptr->siga_flag.no_sync_out_pci) - sprintf(s + strlen(s), "SyncOutPCI"); + sprintf(s + strlen(s), "on SC %x using ", irq_ptr->schid.sch_no); + sprintf(s + strlen(s), "AI:%d ", is_thinint_irq(irq_ptr)); + sprintf(s + strlen(s), "QEBSM:%d ", (irq_ptr->sch_token) ? 1 : 0); + sprintf(s + strlen(s), "PCI:%d ", + (irq_ptr->qib.ac & QIB_AC_OUTBOUND_PCI_SUPPORTED) ? 1 : 0); + sprintf(s + strlen(s), "TDD:%d ", css_general_characteristics.aif_tdd); + sprintf(s + strlen(s), "SIGA:"); + sprintf(s + strlen(s), "%s", (irq_ptr->siga_flag.input) ? "R" : " "); + sprintf(s + strlen(s), "%s", (irq_ptr->siga_flag.output) ? "W" : " "); + sprintf(s + strlen(s), "%s", (irq_ptr->siga_flag.sync) ? "S" : " "); + sprintf(s + strlen(s), "%s", + (!irq_ptr->siga_flag.no_sync_ti) ? "A" : " "); + sprintf(s + strlen(s), "%s", + (!irq_ptr->siga_flag.no_sync_out_ti) ? "O" : " "); + sprintf(s + strlen(s), "%s", + (!irq_ptr->siga_flag.no_sync_out_pci) ? "P" : " "); sprintf(s + strlen(s), "\n"); - printk(KERN_INFO "qdio: %s", s); + printk(KERN_INFO "%s", s); } int __init qdio_setup_init(void) -- cgit v1.2.3 From 96d746c68fae9a1e3167caab04c22fd0f677f62d Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Fri, 3 Oct 2008 13:38:07 -0700 Subject: Fix init/main.c to use regular printk with '%pF' for initcall fn .. small detail, but the silly e1000e initcall warning debugging caused me to look at this code. Rather than gouge my eyes out with a spoon, I just fixed it. Signed-off-by: Linus Torvalds --- init/main.c | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-) diff --git a/init/main.c b/init/main.c index f6f7042331dc..3820323c4c84 100644 --- a/init/main.c +++ b/init/main.c @@ -708,7 +708,7 @@ int do_one_initcall(initcall_t fn) int result; if (initcall_debug) { - print_fn_descriptor_symbol("calling %s\n", fn); + printk("calling %pF\n", fn); t0 = ktime_get(); } @@ -718,8 +718,8 @@ int do_one_initcall(initcall_t fn) t1 = ktime_get(); delta = ktime_sub(t1, t0); - print_fn_descriptor_symbol("initcall %s", fn); - printk(" returned %d after %Ld msecs\n", result, + printk("initcall %pF returned %d after %Ld msecs\n", + fn, result, (unsigned long long) delta.tv64 >> 20); } @@ -737,8 +737,7 @@ int do_one_initcall(initcall_t fn) local_irq_enable(); } if (msgbuf[0]) { - print_fn_descriptor_symbol(KERN_WARNING "initcall %s", fn); - printk(" returned with %s\n", msgbuf); + printk("initcall %pF returned with %s\n", fn, msgbuf); } return result; -- cgit v1.2.3 From cc65f1ec192dc54de57483194502e9fa00934c39 Mon Sep 17 00:00:00 2001 From: "H. Peter Anvin" Date: Fri, 3 Oct 2008 13:00:56 -0700 Subject: x86 setup: correct segfault in generation of 32-bit reloc kernel Impact: segfault on build of a 32-bit relocatable kernel When converting arch/x86/boot/compressed/relocs.c to support unlimited sections, the computation of sym_strtab in walk_relocs() was done incorrectly. This causes a segfault for some people when building the relocatable 32-bit kernel. Pointed out by Anonymous . Signed-off-by: H. Peter Anvin --- arch/x86/boot/compressed/relocs.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/boot/compressed/relocs.c b/arch/x86/boot/compressed/relocs.c index a1310c52fc0c..857e492c571e 100644 --- a/arch/x86/boot/compressed/relocs.c +++ b/arch/x86/boot/compressed/relocs.c @@ -492,7 +492,7 @@ static void walk_relocs(void (*visit)(Elf32_Rel *rel, Elf32_Sym *sym)) continue; } sh_symtab = sec_symtab->symtab; - sym_strtab = sec->link->strtab; + sym_strtab = sec_symtab->link->strtab; for (j = 0; j < sec->shdr.sh_size/sizeof(Elf32_Rel); j++) { Elf32_Rel *rel; Elf32_Sym *sym; -- cgit v1.2.3 From 3040a6d5a2655c7967bd42b5fb4903d48daa747f Mon Sep 17 00:00:00 2001 From: Paul Moore Date: Fri, 3 Oct 2008 10:51:15 -0400 Subject: selinux: Fix an uninitialized variable BUG/panic in selinux_secattr_to_sid() At some point during the 2.6.27 development cycle two new fields were added to the SELinux context structure, a string pointer and a length field. The code in selinux_secattr_to_sid() was not modified and as a result these two fields were left uninitialized which could result in erratic behavior, including kernel panics, when NetLabel is used. This patch fixes the problem by fully initializing the context in selinux_secattr_to_sid() before use and reducing the level of direct context manipulation done to help prevent future problems. Please apply this to the 2.6.27-rcX release stream. Signed-off-by: Paul Moore Signed-off-by: James Morris --- security/selinux/ss/services.c | 11 ++++------- 1 file changed, 4 insertions(+), 7 deletions(-) diff --git a/security/selinux/ss/services.c b/security/selinux/ss/services.c index d11a8154500f..8551952ef329 100644 --- a/security/selinux/ss/services.c +++ b/security/selinux/ss/services.c @@ -2737,6 +2737,7 @@ int security_netlbl_secattr_to_sid(struct netlbl_lsm_secattr *secattr, if (ctx == NULL) goto netlbl_secattr_to_sid_return; + context_init(&ctx_new); ctx_new.user = ctx->user; ctx_new.role = ctx->role; ctx_new.type = ctx->type; @@ -2745,13 +2746,9 @@ int security_netlbl_secattr_to_sid(struct netlbl_lsm_secattr *secattr, if (ebitmap_netlbl_import(&ctx_new.range.level[0].cat, secattr->attr.mls.cat) != 0) goto netlbl_secattr_to_sid_return; - ctx_new.range.level[1].cat.highbit = - ctx_new.range.level[0].cat.highbit; - ctx_new.range.level[1].cat.node = - ctx_new.range.level[0].cat.node; - } else { - ebitmap_init(&ctx_new.range.level[0].cat); - ebitmap_init(&ctx_new.range.level[1].cat); + memcpy(&ctx_new.range.level[1].cat, + &ctx_new.range.level[0].cat, + sizeof(ctx_new.range.level[0].cat)); } if (mls_context_isvalid(&policydb, &ctx_new) != 1) goto netlbl_secattr_to_sid_return_cleanup; -- cgit v1.2.3 From 2e4a75cdcb89ff53bb182dda3a6dcdc14befe007 Mon Sep 17 00:00:00 2001 From: Marcin Slusarz Date: Fri, 3 Oct 2008 15:23:36 -0700 Subject: rtc: fix kernel panic on second use of SIGIO nofitication When userspace uses SIGIO notification and forgets to disable it before closing file descriptor, rtc->async_queue contains stale pointer to struct file. When user space enables again SIGIO notification in different process, kernel dereferences this (poisoned) pointer and crashes. So disable SIGIO notification on close. Kernel panic: (second run of qemu (requires echo 1024 > /sys/class/rtc/rtc0/max_user_freq)) general protection fault: 0000 [1] PREEMPT CPU 0 Modules linked in: af_packet snd_pcm_oss snd_mixer_oss snd_seq_oss snd_seq_midi_event snd_seq usbhid tuner tea5767 tda8290 tuner_xc2028 xc5000 tda9887 tuner_simple tuner_types mt20xx tea5761 tda9875 uhci_hcd ehci_hcd usbcore bttv snd_via82xx snd_ac97_codec ac97_bus snd_pcm snd_timer ir_common compat_ioctl32 snd_page_alloc videodev v4l1_compat snd_mpu401_uart snd_rawmidi v4l2_common videobuf_dma_sg videobuf_core snd_seq_device snd btcx_risc soundcore tveeprom i2c_viapro Pid: 5781, comm: qemu-system-x86 Not tainted 2.6.27-rc6 #363 RIP: 0010:[] [] __lock_acquire+0x3db/0x73f RSP: 0000:ffffffff80674cb8 EFLAGS: 00010002 RAX: ffff8800224c62f0 RBX: 0000000000000046 RCX: 0000000000000002 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff8800224c62f0 RBP: ffffffff80674d08 R08: 0000000000000002 R09: 0000000000000001 R10: ffffffff80238941 R11: 0000000000000001 R12: 0000000000000000 R13: 6b6b6b6b6b6b6b6b R14: ffff88003a450080 R15: 0000000000000000 FS: 00007f98b69516f0(0000) GS:ffffffff80623200(0000) knlGS:00000000f7cc86d0 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 0000000000a87000 CR3: 0000000022598000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process qemu-system-x86 (pid: 5781, threadinfo ffff880028812000, task ffff88003a450080) Stack: ffffffff80674cf8 0000000180238440 0000000200000002 0000000000000000 ffff8800224c62f0 0000000000000046 0000000000000000 0000000000000002 0000000000000002 0000000000000000 ffffffff80674d68 ffffffff8024fc7a Call Trace: [] lock_acquire+0x85/0xa9 [] ? send_sigio+0x2a/0x184 [] _read_lock+0x3e/0x4a [] ? send_sigio+0x2a/0x184 [] send_sigio+0x2a/0x184 [] ? __lock_acquire+0x6e1/0x73f [] ? kill_fasync+0x2c/0x4e [] __kill_fasync+0x54/0x65 [] kill_fasync+0x3a/0x4e [] rtc_update_irq+0x9c/0xa5 [] cmos_interrupt+0xae/0xc0 [] handle_IRQ_event+0x25/0x5a [] handle_edge_irq+0xdd/0x123 [] do_IRQ+0xe4/0x144 [] ret_from_intr+0x0/0xf [] ? __alloc_pages_internal+0xe7/0x3ad [] ? clear_page_c+0x7/0x10 [] ? get_page_from_freelist+0x385/0x450 [] ? __alloc_pages_internal+0xe7/0x3ad [] ? anon_vma_prepare+0x2e/0xf6 [] ? handle_mm_fault+0x227/0x6a5 [] ? do_page_fault+0x494/0x83f [] ? error_exit+0x0/0xa9 Code: cc 41 39 45 28 74 24 e8 5e 1d 0f 00 85 c0 0f 84 6a 03 00 00 83 3d 8f a9 aa 00 00 be 47 03 00 00 0f 84 6a 02 00 00 e9 53 03 00 00 <41> ff 85 38 01 00 00 45 8b be 90 06 00 00 41 83 ff 2f 76 24 e8 RIP [] __lock_acquire+0x3db/0x73f RSP ---[ end trace 431877d860448760 ]--- Kernel panic - not syncing: Aiee, killing interrupt handler! Signed-off-by: Marcin Slusarz Acked-by: Alessandro Zummo Acked-by: David Brownell Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/rtc/rtc-dev.c | 15 +++++++++------ 1 file changed, 9 insertions(+), 6 deletions(-) diff --git a/drivers/rtc/rtc-dev.c b/drivers/rtc/rtc-dev.c index f118252f3a9f..52e2743b04ec 100644 --- a/drivers/rtc/rtc-dev.c +++ b/drivers/rtc/rtc-dev.c @@ -422,6 +422,12 @@ done: return err; } +static int rtc_dev_fasync(int fd, struct file *file, int on) +{ + struct rtc_device *rtc = file->private_data; + return fasync_helper(fd, file, on, &rtc->async_queue); +} + static int rtc_dev_release(struct inode *inode, struct file *file) { struct rtc_device *rtc = file->private_data; @@ -434,16 +440,13 @@ static int rtc_dev_release(struct inode *inode, struct file *file) if (rtc->ops->release) rtc->ops->release(rtc->dev.parent); + if (file->f_flags & FASYNC) + rtc_dev_fasync(-1, file, 0); + clear_bit_unlock(RTC_DEV_BUSY, &rtc->flags); return 0; } -static int rtc_dev_fasync(int fd, struct file *file, int on) -{ - struct rtc_device *rtc = file->private_data; - return fasync_helper(fd, file, on, &rtc->async_queue); -} - static const struct file_operations rtc_dev_fops = { .owner = THIS_MODULE, .llseek = no_llseek, -- cgit v1.2.3 From aef7db4bd5a3b6068dfa05919a3d685199eed116 Mon Sep 17 00:00:00 2001 From: Krzysztof Helt Date: Fri, 3 Oct 2008 15:23:38 -0700 Subject: fbdev: fix recursive notifier and locking when fbdev console is blanked Fix infinite recursive notifier in the fbdev layer. This causes recursive locking. Dmitry Baryshkov found the problem and confirmed that the patch fixes the bug. After doing # echo 1 > /sys/class/graphics/fb0/blank I got the following in my kernel log: ============================================= [ INFO: possible recursive locking detected ] 2.6.27-rc6-00086-gda63874-dirty #97 --------------------------------------------- echo/1564 is trying to acquire lock: ((fb_notifier_list).rwsem){..--}, at: [] __blocking_notifier_call_chain+0x38/0x6c but task is already holding lock: ((fb_notifier_list).rwsem){..--}, at: [] __blocking_notifier_call_chain+0x38/0x6c other info that might help us debug this: 2 locks held by echo/1564: #0: (&buffer->mutex){--..}, at: [] sysfs_write_file+0x30/0x80 #1: ((fb_notifier_list).rwsem){..--}, at: [] __blocking_notifier_call_chain+0x38/0x6c stack backtrace: [] (dump_stack+0x0/0x14) from [] (print_deadlock_bug+0xa4/0xd0) [] (print_deadlock_bug+0x0/0xd0) from [] (check_deadlock+0x148/0x17c) r6:c397a1e0 r5:c397a530 r4:c04fcf98 [] (check_deadlock+0x0/0x17c) from [] (validate_chain+0x3c4/0x4f0) [] (validate_chain+0x0/0x4f0) from [] (__lock_acquire+0x5e8/0x6b4) [] (__lock_acquire+0x0/0x6b4) from [] (lock_acquire+0x64/0x78) [] (lock_acquire+0x0/0x78) from [] (down_read+0x4c/0x60) r7:00000009 r6:ffffffff r5:c0427a40 r4:c005a384 [] (down_read+0x0/0x60) from [] (__blocking_notifier_call_chain+0x38/0x6c) r5:c0427a40 r4:c0427a74 [] (__blocking_notifier_call_chain+0x0/0x6c) from [] (blocking_notifier_call_chain+0x20/0x28) r8:00000009 r7:c086d640 r6:c3967940 r5:00000000 r4:c38984b8 [] (blocking_notifier_call_chain+0x0/0x28) from [] (fb_notifier_call_chain+0x1c/0x24) [] (fb_notifier_call_chain+0x0/0x24) from [] (fb_blank+0x64/0x70) [] (fb_blank+0x0/0x70) from [] (fbcon_blank+0x114/0x1bc) r5:00000001 r4:c38984b8 [] (fbcon_blank+0x0/0x1bc) from [] (do_blank_screen+0x1e0/0x2a0) [] (do_blank_screen+0x0/0x2a0) from [] (fbcon_fb_blanked+0x74/0x94) r5:c3967940 r4:00000001 [] (fbcon_fb_blanked+0x0/0x94) from [] (fbcon_event_notify+0x100/0x12c) r5:fffffffe r4:c39bc194 [] (fbcon_event_notify+0x0/0x12c) from [] (notifier_call_chain+0x38/0x7c) [] (notifier_call_chain+0x0/0x7c) from [] (__blocking_notifier_call_chain+0x54/0x6c) r8:c3b51ea0 r7:00000009 r6:ffffffff r5:c0427a40 r4:c0427a74 [] (__blocking_notifier_call_chain+0x0/0x6c) from [] (blocking_notifier_call_chain+0x20/0x28) r8:00000001 r7:c3a7e000 r6:00000000 r5:00000000 r4:c38984b8 [] (blocking_notifier_call_chain+0x0/0x28) from [] (fb_notifier_call_chain+0x1c/0x24) [] (fb_notifier_call_chain+0x0/0x24) from [] (fb_blank+0x64/0x70) [] (fb_blank+0x0/0x70) from [] (store_blank+0x54/0x7c) r5:c38984b8 r4:c3b51ec4 [] (store_blank+0x0/0x7c) from [] (dev_attr_store+0x28/0x2c) r8:00000001 r7:c042bf80 r6:c39eba10 r5:c3967c30 r4:c38e0140 [] (dev_attr_store+0x0/0x2c) from [] (flush_write_buffer+0x54/0x68) [] (flush_write_buffer+0x0/0x68) from [] (sysfs_write_file+0x58/0x80) r8:c3b51f78 r7:c3bcb070 r6:c39eba10 r5:00000001 r4:00000001 [] (sysfs_write_file+0x0/0x80) from [] (vfs_write+0xb8/0x148) [] (vfs_write+0x0/0x148) from [] (sys_write+0x44/0x70) r7:00000004 r6:c3bcb070 r5:00000000 r4:00000000 [] (sys_write+0x0/0x70) from [] (ret_fast_syscall+0x0/0x2c) r6:4001b000 r5:00000001 r4:401dc658 Signed-off-by: Krzysztof Helt Reported-by: Dmitry Baryshkov Testted-by: Dmitry Baryshkov Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/video/console/fbcon.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/video/console/fbcon.c b/drivers/video/console/fbcon.c index c6299e8a041d..9cbff84b787d 100644 --- a/drivers/video/console/fbcon.c +++ b/drivers/video/console/fbcon.c @@ -2400,11 +2400,15 @@ static int fbcon_blank(struct vc_data *vc, int blank, int mode_switch) if (!fbcon_is_inactive(vc, info)) { if (ops->blank_state != blank) { + int ret = 1; + ops->blank_state = blank; fbcon_cursor(vc, blank ? CM_ERASE : CM_DRAW); ops->cursor_flash = (!blank); - if (fb_blank(info, blank)) + if (info->fbops->fb_blank) + ret = info->fbops->fb_blank(blank, info); + if (ret) fbcon_generic_blank(vc, info, blank); } -- cgit v1.2.3 From f2fe1638f624467ae583b1a41a01804405f29eee Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Fri, 3 Oct 2008 15:23:39 -0700 Subject: orion_spi: fix handling of default transfer speed Accept zero (the default!) as a per-transfer clock speed override. Signed-off-by: Lennert Buytenhek Signed-off-by: David Brownell Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/spi/orion_spi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/spi/orion_spi.c b/drivers/spi/orion_spi.c index c4eaacd6e553..b872bfaf4bd2 100644 --- a/drivers/spi/orion_spi.c +++ b/drivers/spi/orion_spi.c @@ -427,7 +427,7 @@ static int orion_spi_transfer(struct spi_device *spi, struct spi_message *m) goto msg_rejected; } - if (t->speed_hz < orion_spi->min_speed) { + if (t->speed_hz && t->speed_hz < orion_spi->min_speed) { dev_err(&spi->dev, "message rejected : " "device min speed (%d Hz) exceeds " -- cgit v1.2.3 From 897312bd240357c88ce906633703c324c6f0a5cd Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Fri, 3 Oct 2008 15:23:41 -0700 Subject: include/linux/stacktrace.h: declare struct task_struct include/linux/stacktrace.h:13: warning: 'struct task_struct' declared inside parameter list (This might be a hard error on sparc64, which uses this header and has -Werror) Reported-by: "Randy.Dunlap" Acked-by: Ingo Molnar Cc: Peter Zijlstra Cc: Arjan van de Ven Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/stacktrace.h | 2 ++ 1 file changed, 2 insertions(+) diff --git a/include/linux/stacktrace.h b/include/linux/stacktrace.h index 5da9794b2d78..b106fd8e0d5c 100644 --- a/include/linux/stacktrace.h +++ b/include/linux/stacktrace.h @@ -1,6 +1,8 @@ #ifndef __LINUX_STACKTRACE_H #define __LINUX_STACKTRACE_H +struct task_struct; + #ifdef CONFIG_STACKTRACE struct stack_trace { unsigned int nr_entries, max_entries; -- cgit v1.2.3 From c222817f6add85197790e0071f6e511eff14ba25 Mon Sep 17 00:00:00 2001 From: Paul Jackson Date: Fri, 3 Oct 2008 15:23:42 -0700 Subject: cpusets: remove pj from cpuset maintainers Remove myself from the kernel MAINTAINERS file for cpusets. I am leaving SGI and probably will not be active in Linux kernel work. I can be reached at . Contact Derek Fults for future SGI+cpuset related issues. I'm off to the next chapter of this good life. Signed-off-by: Paul Jackson Cc: Paul Menage Cc: Derek Fults Cc: John Hesterberg Cc: Paul Jackson Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- MAINTAINERS | 2 -- 1 file changed, 2 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index 3596d1782264..f3d9cdb2816d 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1198,9 +1198,7 @@ M: hpa@zytor.com S: Maintained CPUSETS -P: Paul Jackson P: Paul Menage -M: pj@sgi.com M: menage@google.com L: linux-kernel@vger.kernel.org W: http://www.bullopensource.org/cpuset/ -- cgit v1.2.3 From bd7ebec64d65ccf72a955a50fec27caf0f2458f1 Mon Sep 17 00:00:00 2001 From: Michael Kerrisk Date: Fri, 3 Oct 2008 15:23:44 -0700 Subject: MAINTAINERS: add mailing list for man-pages Nowadays, man-pages has an associated mailing list. Mention that list in MAINTAINERS. Signed-off-by: Michael Kerrisk Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- MAINTAINERS | 1 + 1 file changed, 1 insertion(+) diff --git a/MAINTAINERS b/MAINTAINERS index f3d9cdb2816d..8dae4555f10e 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2704,6 +2704,7 @@ MAN-PAGES: MANUAL PAGES FOR LINUX -- Sections 2, 3, 4, 5, and 7 P: Michael Kerrisk M: mtk.manpages@gmail.com W: http://www.kernel.org/doc/man-pages +L: linux-man@vger.kernel.org S: Supported MARVELL LIBERTAS WIRELESS DRIVER -- cgit v1.2.3 From 1d992ce905c838c2ca26fff8f2417cd31f667fd5 Mon Sep 17 00:00:00 2001 From: Michael Kerrisk Date: Fri, 3 Oct 2008 15:23:44 -0700 Subject: SubmitChecklist: interfaces changes should CC linux-api@ Mention that patches that change the kernel-userland interface should be CCed to the new list linux-api@vger.kernel.org. Signed-off-by: Michael Kerrisk Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- Documentation/SubmitChecklist | 2 ++ 1 file changed, 2 insertions(+) diff --git a/Documentation/SubmitChecklist b/Documentation/SubmitChecklist index da10e0714241..21f0795af20f 100644 --- a/Documentation/SubmitChecklist +++ b/Documentation/SubmitChecklist @@ -67,6 +67,8 @@ kernel patches. 19: All new userspace interfaces are documented in Documentation/ABI/. See Documentation/ABI/README for more information. + Patches that change userspace interfaces should be CCed to + linux-api@vger.kernel.org. 20: Check that it all passes `make headers_check'. -- cgit v1.2.3 From 09b05f5ee04cd2e2af3384d50646f53c76712f10 Mon Sep 17 00:00:00 2001 From: Michael Kerrisk Date: Fri, 3 Oct 2008 15:23:45 -0700 Subject: Documentation/HOWTO: info about interface changes should CC linux-api@vger The "Documentation" section of this file mentions that when an interface change is made, I should be CCed with info about the change (so that man-pages can document it). Additionally request that this info be CCed to the new linux-api@vger.kernel.org list. Signed-off-by: Michael Kerrisk Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- Documentation/HOWTO | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/Documentation/HOWTO b/Documentation/HOWTO index c2371c5a98f9..48a3955f05fc 100644 --- a/Documentation/HOWTO +++ b/Documentation/HOWTO @@ -77,7 +77,8 @@ documentation files are also added which explain how to use the feature. When a kernel change causes the interface that the kernel exposes to userspace to change, it is recommended that you send the information or a patch to the manual pages explaining the change to the manual pages -maintainer at mtk.manpages@gmail.com. +maintainer at mtk.manpages@gmail.com, and CC the list +linux-api@vger.kernel.org. Here is a list of files that are in the kernel source tree that are required reading: -- cgit v1.2.3 From 7fe7b2f4ec14d6517078c5bc32b04301b468041c Mon Sep 17 00:00:00 2001 From: Haavard Skinnemoen Date: Fri, 3 Oct 2008 15:23:46 -0700 Subject: dw_dmac: fix copy/paste bug in tasklet The tasklet checks RAW.BLOCK twice, and does not check RAW.XFER. This is obviously wrong, and could theoretically cause the driver to hang. Reported-by: Nicolas Ferre Signed-off-by: Haavard Skinnemoen Acked-by: Dan Williams Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/dma/dw_dmac.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/dma/dw_dmac.c b/drivers/dma/dw_dmac.c index 94df91771243..0778d99aea7c 100644 --- a/drivers/dma/dw_dmac.c +++ b/drivers/dma/dw_dmac.c @@ -364,7 +364,7 @@ static void dw_dma_tasklet(unsigned long data) int i; status_block = dma_readl(dw, RAW.BLOCK); - status_xfer = dma_readl(dw, RAW.BLOCK); + status_xfer = dma_readl(dw, RAW.XFER); status_err = dma_readl(dw, RAW.ERROR); dev_vdbg(dw->dma.dev, "tasklet: status_block=%x status_err=%x\n", -- cgit v1.2.3 From 07f696c7772fb3501e9531de38333c49143a8d52 Mon Sep 17 00:00:00 2001 From: Sven Wegener Date: Fri, 3 Oct 2008 15:23:47 -0700 Subject: leds-fsg: change order of initialization and deinitialization On initialization, we first do the ioremap and then register the led devices. On deinitialization, we do it in reverse order. This prevents someone calling into the brightness_set functions with an invalid latch_address. Signed-off-by: Sven Wegener Acked-by: Rod Whitby Acked-by: Richard Purdie Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/leds/leds-fsg.c | 28 ++++++++++++++-------------- 1 file changed, 14 insertions(+), 14 deletions(-) diff --git a/drivers/leds/leds-fsg.c b/drivers/leds/leds-fsg.c index be0e12144b8b..34935155c1c0 100644 --- a/drivers/leds/leds-fsg.c +++ b/drivers/leds/leds-fsg.c @@ -161,6 +161,16 @@ static int fsg_led_probe(struct platform_device *pdev) { int ret; + /* Map the LED chip select address space */ + latch_address = (unsigned short *) ioremap(IXP4XX_EXP_BUS_BASE(2), 512); + if (!latch_address) { + ret = -ENOMEM; + goto failremap; + } + + latch_value = 0xffff; + *latch_address = latch_value; + ret = led_classdev_register(&pdev->dev, &fsg_wlan_led); if (ret < 0) goto failwlan; @@ -185,20 +195,8 @@ static int fsg_led_probe(struct platform_device *pdev) if (ret < 0) goto failring; - /* Map the LED chip select address space */ - latch_address = (unsigned short *) ioremap(IXP4XX_EXP_BUS_BASE(2), 512); - if (!latch_address) { - ret = -ENOMEM; - goto failremap; - } - - latch_value = 0xffff; - *latch_address = latch_value; - return ret; - failremap: - led_classdev_unregister(&fsg_ring_led); failring: led_classdev_unregister(&fsg_sync_led); failsync: @@ -210,14 +208,14 @@ static int fsg_led_probe(struct platform_device *pdev) failwan: led_classdev_unregister(&fsg_wlan_led); failwlan: + iounmap(latch_address); + failremap: return ret; } static int fsg_led_remove(struct platform_device *pdev) { - iounmap(latch_address); - led_classdev_unregister(&fsg_wlan_led); led_classdev_unregister(&fsg_wan_led); led_classdev_unregister(&fsg_sata_led); @@ -225,6 +223,8 @@ static int fsg_led_remove(struct platform_device *pdev) led_classdev_unregister(&fsg_sync_led); led_classdev_unregister(&fsg_ring_led); + iounmap(latch_address); + return 0; } -- cgit v1.2.3 From 95bf14bff58fd200f0c2147c84582cc2488367d0 Mon Sep 17 00:00:00 2001 From: Sven Wegener Date: Fri, 3 Oct 2008 15:23:48 -0700 Subject: leds-pca955x: add proper error handling and fix bogus memory handling Check the return value of led_classdev_register and unregister all registered devices, if registering one device fails. Also the dynamic memory handling is totally bogus. You can't allocate multiple chunks via kzalloc() and expect them to be in order later. I wonder how this ever worked. Signed-off-by: Sven Wegener Acked-by: Nate Case Tested-by: Nate Case Acked-by: Richard Purdie Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/leds/leds-pca955x.c | 70 ++++++++++++++++++++++++--------------------- 1 file changed, 38 insertions(+), 32 deletions(-) diff --git a/drivers/leds/leds-pca955x.c b/drivers/leds/leds-pca955x.c index 146c06972863..f508729123b5 100644 --- a/drivers/leds/leds-pca955x.c +++ b/drivers/leds/leds-pca955x.c @@ -248,11 +248,10 @@ static int __devinit pca955x_probe(struct i2c_client *client, const struct i2c_device_id *id) { struct pca955x_led *pca955x; - int i; - int err = -ENODEV; struct pca955x_chipdef *chip; struct i2c_adapter *adapter; struct led_platform_data *pdata; + int i, err; chip = &pca955x_chipdefs[id->driver_data]; adapter = to_i2c_adapter(client->dev.parent); @@ -282,43 +281,41 @@ static int __devinit pca955x_probe(struct i2c_client *client, } } + pca955x = kzalloc(sizeof(*pca955x) * chip->bits, GFP_KERNEL); + if (!pca955x) + return -ENOMEM; + + i2c_set_clientdata(client, pca955x); + for (i = 0; i < chip->bits; i++) { - pca955x = kzalloc(sizeof(struct pca955x_led), GFP_KERNEL); - if (!pca955x) { - err = -ENOMEM; - goto exit; - } + pca955x[i].chipdef = chip; + pca955x[i].client = client; + pca955x[i].led_num = i; - pca955x->chipdef = chip; - pca955x->client = client; - pca955x->led_num = i; /* Platform data can specify LED names and default triggers */ if (pdata) { if (pdata->leds[i].name) - snprintf(pca955x->name, 32, "pca955x:%s", - pdata->leds[i].name); + snprintf(pca955x[i].name, + sizeof(pca955x[i].name), "pca955x:%s", + pdata->leds[i].name); if (pdata->leds[i].default_trigger) - pca955x->led_cdev.default_trigger = + pca955x[i].led_cdev.default_trigger = pdata->leds[i].default_trigger; } else { - snprintf(pca955x->name, 32, "pca955x:%d", i); + snprintf(pca955x[i].name, sizeof(pca955x[i].name), + "pca955x:%d", i); } - spin_lock_init(&pca955x->lock); - pca955x->led_cdev.name = pca955x->name; - pca955x->led_cdev.brightness_set = - pca955x_led_set; + spin_lock_init(&pca955x[i].lock); - /* - * Client data is a pointer to the _first_ pca955x_led - * struct - */ - if (i == 0) - i2c_set_clientdata(client, pca955x); + pca955x[i].led_cdev.name = pca955x[i].name; + pca955x[i].led_cdev.brightness_set = pca955x_led_set; - INIT_WORK(&(pca955x->work), pca955x_led_work); + INIT_WORK(&pca955x[i].work, pca955x_led_work); - led_classdev_register(&client->dev, &(pca955x->led_cdev)); + err = led_classdev_register(&client->dev, &pca955x[i].led_cdev); + if (err < 0) + goto exit; } /* Turn off LEDs */ @@ -336,23 +333,32 @@ static int __devinit pca955x_probe(struct i2c_client *client, pca955x_write_psc(client, 1, 0); return 0; + exit: + while (i--) { + led_classdev_unregister(&pca955x[i].led_cdev); + cancel_work_sync(&pca955x[i].work); + } + + kfree(pca955x); + i2c_set_clientdata(client, NULL); + return err; } static int __devexit pca955x_remove(struct i2c_client *client) { struct pca955x_led *pca955x = i2c_get_clientdata(client); - int leds = pca955x->chipdef->bits; int i; - for (i = 0; i < leds; i++) { - led_classdev_unregister(&(pca955x->led_cdev)); - cancel_work_sync(&(pca955x->work)); - kfree(pca955x); - pca955x = pca955x + 1; + for (i = 0; i < pca955x->chipdef->bits; i++) { + led_classdev_unregister(&pca955x[i].led_cdev); + cancel_work_sync(&pca955x[i].work); } + kfree(pca955x); + i2c_set_clientdata(client, NULL); + return 0; } -- cgit v1.2.3 From 76acae04c892287949e1191e99600f3e952e43f7 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Fri, 3 Oct 2008 15:23:49 -0700 Subject: ACPI: Make /proc/acpi/wakeup interface handle PCI devices (again) Make the ACPI /proc/acpi/wakeup interface set the appropriate wake-up bits of physical devices corresponding to the ACPI devices and make those bits be set initially for devices that are enabled to wake up by default. This is needed to restore the 2.6.26 and earlier behavior for the PCI devices that were previously handled correctly with the help of the /proc/acpi/wakeup interface. Signed-off-by: Rafael J. Wysocki Cc: Len Brown Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/acpi/glue.c | 5 ++++- drivers/acpi/sleep/proc.c | 10 ++++++++++ 2 files changed, 14 insertions(+), 1 deletion(-) diff --git a/drivers/acpi/glue.c b/drivers/acpi/glue.c index 084109507c9f..8dd3336efd7e 100644 --- a/drivers/acpi/glue.c +++ b/drivers/acpi/glue.c @@ -165,8 +165,11 @@ static int acpi_bind_one(struct device *dev, acpi_handle handle) "firmware_node"); ret = sysfs_create_link(&acpi_dev->dev.kobj, &dev->kobj, "physical_node"); - if (acpi_dev->wakeup.flags.valid) + if (acpi_dev->wakeup.flags.valid) { device_set_wakeup_capable(dev, true); + device_set_wakeup_enable(dev, + acpi_dev->wakeup.state.enabled); + } } return 0; diff --git a/drivers/acpi/sleep/proc.c b/drivers/acpi/sleep/proc.c index 4ebbba2b6b19..bf5b04de02d1 100644 --- a/drivers/acpi/sleep/proc.c +++ b/drivers/acpi/sleep/proc.c @@ -377,6 +377,14 @@ acpi_system_wakeup_device_seq_show(struct seq_file *seq, void *offset) return 0; } +static void physical_device_enable_wakeup(struct acpi_device *adev) +{ + struct device *dev = acpi_get_physical_device(adev->handle); + + if (dev && device_can_wakeup(dev)) + device_set_wakeup_enable(dev, adev->wakeup.state.enabled); +} + static ssize_t acpi_system_write_wakeup_device(struct file *file, const char __user * buffer, @@ -411,6 +419,7 @@ acpi_system_write_wakeup_device(struct file *file, } } if (found_dev) { + physical_device_enable_wakeup(found_dev); list_for_each_safe(node, next, &acpi_wakeup_device_list) { struct acpi_device *dev = container_of(node, struct @@ -428,6 +437,7 @@ acpi_system_write_wakeup_device(struct file *file, dev->pnp.bus_id, found_dev->pnp.bus_id); dev->wakeup.state.enabled = found_dev->wakeup.state.enabled; + physical_device_enable_wakeup(dev); } } } -- cgit v1.2.3 From 07454bfff151d2465ada809bbaddf3548cc1097c Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Sat, 4 Oct 2008 10:51:07 +0200 Subject: clockevents: check broadcast tick device not the clock events device Impact: jiffies increment too fast. Hugh Dickins noted that with NOHZ=n and HIGHRES=n jiffies get incremented too fast. The reason is a wrong check in the broadcast enter/exit code, which keeps the local apic timer in periodic mode when the switch happens. Signed-off-by: Thomas Gleixner --- kernel/time/tick-broadcast.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/kernel/time/tick-broadcast.c b/kernel/time/tick-broadcast.c index bd7034542399..cb01cd8f919b 100644 --- a/kernel/time/tick-broadcast.c +++ b/kernel/time/tick-broadcast.c @@ -235,7 +235,8 @@ static void tick_do_broadcast_on_off(void *why) case CLOCK_EVT_NOTIFY_BROADCAST_FORCE: if (!cpu_isset(cpu, tick_broadcast_mask)) { cpu_set(cpu, tick_broadcast_mask); - if (bc->mode == TICKDEV_MODE_PERIODIC) + if (tick_broadcast_device.mode == + TICKDEV_MODE_PERIODIC) clockevents_shutdown(dev); } if (*reason == CLOCK_EVT_NOTIFY_BROADCAST_FORCE) @@ -245,7 +246,8 @@ static void tick_do_broadcast_on_off(void *why) if (!tick_broadcast_force && cpu_isset(cpu, tick_broadcast_mask)) { cpu_clear(cpu, tick_broadcast_mask); - if (bc->mode == TICKDEV_MODE_PERIODIC) + if (tick_broadcast_device.mode == + TICKDEV_MODE_PERIODIC) tick_setup_periodic(dev, 0); } break; -- cgit v1.2.3 From 1167b2e495e42d757f9bb879c60bc0cf3391eaae Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Sat, 6 Sep 2008 07:22:13 -0300 Subject: V4L/DVB (8919): cx18: Fix tuner audio input for Compro H900 cards Earlier fixes to get the tuner audio working correctly broke the audio on the Compro VideoMate H900 cards. This is now fixed. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/cx18/cx18-cards.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/media/video/cx18/cx18-cards.c b/drivers/media/video/cx18/cx18-cards.c index 8fe5f38c4d7c..3cb9734ec07b 100644 --- a/drivers/media/video/cx18/cx18-cards.c +++ b/drivers/media/video/cx18/cx18-cards.c @@ -163,7 +163,7 @@ static const struct cx18_card cx18_card_h900 = { }, .audio_inputs = { { CX18_CARD_INPUT_AUD_TUNER, - CX18_AV_AUDIO8, 0 }, + CX18_AV_AUDIO5, 0 }, { CX18_CARD_INPUT_LINE_IN1, CX18_AV_AUDIO_SERIAL1, 0 }, }, -- cgit v1.2.3 From 0d0548e67f0184704b7ecdf3c3ebf0e23c5af8c8 Mon Sep 17 00:00:00 2001 From: Jean-Francois Moine Date: Fri, 5 Sep 2008 12:49:54 -0300 Subject: V4L/DVB (8926): gspca: Bad fix of leak memory (changeset 43d2ead315b1). Signed-off-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/gspca/gspca.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/drivers/media/video/gspca/gspca.c b/drivers/media/video/gspca/gspca.c index ed8935da58e0..ac95c55887df 100644 --- a/drivers/media/video/gspca/gspca.c +++ b/drivers/media/video/gspca/gspca.c @@ -459,8 +459,7 @@ static int create_urbs(struct gspca_dev *gspca_dev, urb = usb_alloc_urb(npkt, GFP_KERNEL); if (!urb) { err("usb_alloc_urb failed"); - for (i = 0; i < n; i++) - usb_free_urb(gspca_dev->urb[i]); + destroy_urbs(gspca_dev); return -ENOMEM; } urb->transfer_buffer = usb_buffer_alloc(gspca_dev->dev, @@ -470,8 +469,8 @@ static int create_urbs(struct gspca_dev *gspca_dev, if (urb->transfer_buffer == NULL) { usb_free_urb(urb); - destroy_urbs(gspca_dev); err("usb_buffer_urb failed"); + destroy_urbs(gspca_dev); return -ENOMEM; } gspca_dev->urb[n] = urb; -- cgit v1.2.3 From 5be8b73e121c8d293d7cfc698bbb084574fd8de2 Mon Sep 17 00:00:00 2001 From: Costantino Leandro Date: Tue, 9 Sep 2008 04:32:46 -0300 Subject: V4L/DVB (8933): gspca: Disable light frquency for zc3xx cs2102 Kokom. CS2102K stop streaming on setlightfreq (50Hz & 60Hz). Disable it for now until a correct solution is found. Signed-off-by: Costantino Leandro Signed-off-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/gspca/zc3xx.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/media/video/gspca/zc3xx.c b/drivers/media/video/gspca/zc3xx.c index 8d7c27e6ac77..d61ef727e0c2 100644 --- a/drivers/media/video/gspca/zc3xx.c +++ b/drivers/media/video/gspca/zc3xx.c @@ -6576,8 +6576,8 @@ static int setlightfreq(struct gspca_dev *gspca_dev) cs2102_60HZ, cs2102_60HZScale}, /* SENSOR_CS2102K 1 */ {cs2102_NoFliker, cs2102_NoFlikerScale, - cs2102_50HZ, cs2102_50HZScale, - cs2102_60HZ, cs2102_60HZScale}, + NULL, NULL, /* currently disabled */ + NULL, NULL}, /* SENSOR_GC0305 2 */ {gc0305_NoFliker, gc0305_NoFliker, gc0305_50HZ, gc0305_50HZ, -- cgit v1.2.3 From c737684b51e1edee16fbdf22e9a65ddad261e907 Mon Sep 17 00:00:00 2001 From: Douglas Schilling Landgraf Date: Mon, 8 Sep 2008 03:22:55 -0300 Subject: V4L/DVB (8935): em28xx-cards: Remove duplicate entry (EM2800_BOARD_KWORLD_USB2800) Removed duplicated entry for EM2800_BOARD_KWORLD_USB2800 Signed-off-by: Douglas Schilling Landgraf Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/em28xx/em28xx-cards.c | 22 ---------------------- 1 file changed, 22 deletions(-) diff --git a/drivers/media/video/em28xx/em28xx-cards.c b/drivers/media/video/em28xx/em28xx-cards.c index 452da70e719f..4d20cda7a1fa 100644 --- a/drivers/media/video/em28xx/em28xx-cards.c +++ b/drivers/media/video/em28xx/em28xx-cards.c @@ -93,28 +93,6 @@ struct em28xx_board em28xx_boards[] = { .amux = 0, } }, }, - [EM2800_BOARD_KWORLD_USB2800] = { - .name = "Kworld USB2800", - .valid = EM28XX_BOARD_NOT_VALIDATED, - .is_em2800 = 1, - .vchannels = 3, - .tuner_type = TUNER_PHILIPS_FCV1236D, - .tda9887_conf = TDA9887_PRESENT, - .decoder = EM28XX_SAA7113, - .input = { { - .type = EM28XX_VMUX_TELEVISION, - .vmux = SAA7115_COMPOSITE2, - .amux = 0, - }, { - .type = EM28XX_VMUX_COMPOSITE1, - .vmux = SAA7115_COMPOSITE0, - .amux = 1, - }, { - .type = EM28XX_VMUX_SVIDEO, - .vmux = SAA7115_SVIDEO3, - .amux = 1, - } }, - }, [EM2820_BOARD_KWORLD_PVRTV2800RF] = { .name = "Kworld PVR TV 2800 RF", .is_em2800 = 0, -- cgit v1.2.3 From c37396c19403e249f12626187d51e92c915f2bc9 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Sun, 7 Sep 2008 13:47:03 -0300 Subject: V4L/DVB (8955): bttv: Prevent NULL pointer dereference in radio_open Fix the following crash in the bttv driver: BUG: unable to handle kernel NULL pointer dereference at 000000000000036c IP: [] radio_open+0x3a/0x170 [bttv] This happens because radio_open assumes that all present bttv devices have a radio function. If a bttv device without radio and one with radio are installed on the same system, and the one without radio is registered first, then radio_open checks for the radio device number of a bttv device that has no radio function, and this breaks. All we have to do to fix it is to skip bttv devices without a radio function. Signed-off-by: Jean Delvare Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/bt8xx/bttv-driver.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/media/video/bt8xx/bttv-driver.c b/drivers/media/video/bt8xx/bttv-driver.c index 6ae4cc860efe..933eaef41ead 100644 --- a/drivers/media/video/bt8xx/bttv-driver.c +++ b/drivers/media/video/bt8xx/bttv-driver.c @@ -3431,7 +3431,7 @@ static int radio_open(struct inode *inode, struct file *file) dprintk("bttv: open minor=%d\n",minor); for (i = 0; i < bttv_num; i++) { - if (bttvs[i].radio_dev->minor == minor) { + if (bttvs[i].radio_dev && bttvs[i].radio_dev->minor == minor) { btv = &bttvs[i]; break; } -- cgit v1.2.3 From c014ec90bc1b951e3fff89bc6ba826b8ef0f444b Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Sun, 7 Sep 2008 05:21:34 -0300 Subject: V4L/DVB (8957): zr36067: Restore the default pixel format Restore the default pixel format to YUYV as it used to be before kernel 2.6.23. It was accidentally changed to BGR3 by commit 603d6f2c8f9f3604f9c6c1f8903efc2df30a000f. Signed-off-by: Jean Delvare Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/zoran_card.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/media/video/zoran_card.c b/drivers/media/video/zoran_card.c index d842a7cb99d2..3282be730298 100644 --- a/drivers/media/video/zoran_card.c +++ b/drivers/media/video/zoran_card.c @@ -988,7 +988,7 @@ zoran_open_init_params (struct zoran *zr) zr->v4l_grab_seq = 0; zr->v4l_settings.width = 192; zr->v4l_settings.height = 144; - zr->v4l_settings.format = &zoran_formats[4]; /* YUY2 - YUV-4:2:2 packed */ + zr->v4l_settings.format = &zoran_formats[7]; /* YUY2 - YUV-4:2:2 packed */ zr->v4l_settings.bytesperline = zr->v4l_settings.width * ((zr->v4l_settings.format->depth + 7) / 8); -- cgit v1.2.3 From bba4449c637660d5a8b2aee5ad0206df9fd6f334 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Sun, 7 Sep 2008 05:56:55 -0300 Subject: V4L/DVB (8958): zr36067: Return proper bytes-per-line value The zr36067 driver should return the actual bytes-per-line value when queried with ioctl VIDIOC_G_FMT, instead of 0. Otherwise user-space applications can get confused. Likewise, with ioctl VIDIOC_S_FMT, we are supposed to fill the bytes-per-line value. And we shouldn't fail if the caller sets the initial value to something different from 0. This is perfectly valid for applications to pre-fill this field with the value they expect. Signed-off-by: Jean Delvare Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/zoran_driver.c | 13 +++++-------- 1 file changed, 5 insertions(+), 8 deletions(-) diff --git a/drivers/media/video/zoran_driver.c b/drivers/media/video/zoran_driver.c index ec6f59674b10..ca21bd22a02e 100644 --- a/drivers/media/video/zoran_driver.c +++ b/drivers/media/video/zoran_driver.c @@ -2737,7 +2737,8 @@ zoran_do_ioctl (struct inode *inode, fh->v4l_settings.format->fourcc; fmt->fmt.pix.colorspace = fh->v4l_settings.format->colorspace; - fmt->fmt.pix.bytesperline = 0; + fmt->fmt.pix.bytesperline = + fh->v4l_settings.bytesperline; if (BUZ_MAX_HEIGHT < (fh->v4l_settings.height * 2)) fmt->fmt.pix.field = @@ -2833,13 +2834,6 @@ zoran_do_ioctl (struct inode *inode, fmt->fmt.pix.pixelformat, (char *) &printformat); - if (fmt->fmt.pix.bytesperline > 0) { - dprintk(5, - KERN_ERR "%s: bpl not supported\n", - ZR_DEVNAME(zr)); - return -EINVAL; - } - /* we can be requested to do JPEG/raw playback/capture */ if (! (fmt->type == V4L2_BUF_TYPE_VIDEO_CAPTURE || @@ -2923,6 +2917,7 @@ zoran_do_ioctl (struct inode *inode, fh->jpg_buffers.buffer_size = zoran_v4l2_calc_bufsize(&fh-> jpg_settings); + fmt->fmt.pix.bytesperline = 0; fmt->fmt.pix.sizeimage = fh->jpg_buffers.buffer_size; @@ -2979,6 +2974,8 @@ zoran_do_ioctl (struct inode *inode, /* tell the user the * results/missing stuff */ + fmt->fmt.pix.bytesperline = + fh->v4l_settings.bytesperline; fmt->fmt.pix.sizeimage = fh->v4l_settings.height * fh->v4l_settings.bytesperline; -- cgit v1.2.3 From ec16d020836fd0a753312374a3277668ac4f8ee2 Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Wed, 3 Sep 2008 02:15:39 -0300 Subject: V4L/DVB (8960): drivers/media/video/cafe_ccic.c needs mm.h sparc32 allmodconfig: drivers/media/video/cafe_ccic.c: In function 'cafe_setup_siobuf': drivers/media/video/cafe_ccic.c:1192: error: implicit declaration of function 'PAGE_ALIGN' drivers/media/video/cafe_ccic.c: At top level: drivers/media/video/cafe_ccic.c:1430: error: variable 'cafe_v4l_vm_ops' has initializer but incomplete type drivers/media/video/cafe_ccic.c:1431: error: unknown field 'open' specified in initializer drivers/media/video/cafe_ccic.c:1431: warning: excess elements in struct initializer drivers/media/video/cafe_ccic.c:1431: warning: (near initialization for 'cafe_v4l_vm_ops') drivers/media/video/cafe_ccic.c:1432: error: unknown field 'close' specified in initializer drivers/media/video/cafe_ccic.c:1433: warning: excess elements in struct initializer drivers/media/video/cafe_ccic.c:1433: warning: (near initialization for 'cafe_v4l_vm_ops') drivers/media/video/cafe_ccic.c: In function 'cafe_v4l_mmap': drivers/media/video/cafe_ccic.c:1444: error: 'VM_WRITE' undeclared (first use in this function) drivers/media/video/cafe_ccic.c:1444: error: (Each undeclared identifier is reported only once drivers/media/video/cafe_ccic.c:1444: error: for each function it appears in.) drivers/media/video/cafe_ccic.c:1444: error: 'VM_SHARED' undeclared (first use in this function) drivers/media/video/cafe_ccic.c:1461: error: 'VM_DONTEXPAND' undeclared (first use in this function) This build breakage is caused by some header file shuffle in linux-next. But I suggest that this patch be merged ahead of linux-next to avoid bisection breakage. Signed-off-by: Andrew Morton Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/cafe_ccic.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/media/video/cafe_ccic.c b/drivers/media/video/cafe_ccic.c index c149b7d712e5..5405c30dbb04 100644 --- a/drivers/media/video/cafe_ccic.c +++ b/drivers/media/video/cafe_ccic.c @@ -19,6 +19,7 @@ #include #include #include +#include #include #include #include -- cgit v1.2.3 From a30ee3c747728f9151664118ffcbdeefd202c332 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Fri, 5 Sep 2008 10:39:27 -0300 Subject: V4L/DVB (8961): zr36067: Fix RGBR pixel format The zr36067 driver is improperly declaring pixel format RGBP twice, once as "16-bit RGB LE" and once as "16-bit RGB BE". The latter is actually RGBR. Fix the code to properly map both pixel formats. Signed-off-by: Jean Delvare Acked-by: Trent Piepho Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/zoran_driver.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/media/video/zoran_driver.c b/drivers/media/video/zoran_driver.c index ca21bd22a02e..2dab9eea4def 100644 --- a/drivers/media/video/zoran_driver.c +++ b/drivers/media/video/zoran_driver.c @@ -134,7 +134,7 @@ const struct zoran_format zoran_formats[] = { }, { .name = "16-bit RGB BE", ZFMT(-1, - V4L2_PIX_FMT_RGB565, V4L2_COLORSPACE_SRGB), + V4L2_PIX_FMT_RGB565X, V4L2_COLORSPACE_SRGB), .depth = 16, .flags = ZORAN_FORMAT_CAPTURE | ZORAN_FORMAT_OVERLAY, -- cgit v1.2.3 From a1c4530e4e5b73e60ed96c413902c6a46e812494 Mon Sep 17 00:00:00 2001 From: Dean Anderson Date: Tue, 9 Sep 2008 12:29:56 -0300 Subject: V4L/DVB (8963): s2255drv field count fix Fixes videobuf field_count Signed-off-by: Dean Anderson Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/s2255drv.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/media/video/s2255drv.c b/drivers/media/video/s2255drv.c index b1d09d8e2b85..92b83feae366 100644 --- a/drivers/media/video/s2255drv.c +++ b/drivers/media/video/s2255drv.c @@ -669,7 +669,7 @@ static void s2255_fillbuff(struct s2255_dev *dev, struct s2255_buffer *buf, (unsigned long)vbuf, pos); /* tell v4l buffer was filled */ - buf->vb.field_count++; + buf->vb.field_count = dev->frame_count[chn] * 2; do_gettimeofday(&ts); buf->vb.ts = ts; buf->vb.state = VIDEOBUF_DONE; @@ -1268,6 +1268,7 @@ static int vidioc_streamon(struct file *file, void *priv, enum v4l2_buf_type i) dev->last_frame[chn] = -1; dev->bad_payload[chn] = 0; dev->cur_frame[chn] = 0; + dev->frame_count[chn] = 0; for (j = 0; j < SYS_FRAMES; j++) { dev->buffer[chn].frame[j].ulState = 0; dev->buffer[chn].frame[j].cur_size = 0; -- cgit v1.2.3 From 5ea7fe48a95084897786b0f20109d0611bdababc Mon Sep 17 00:00:00 2001 From: Devin Heitmueller Date: Tue, 16 Sep 2008 02:02:12 -0300 Subject: V4L/DVB (8967): Use correct XC3028L firmware for AMD ATI TV Wonder 600 The AMD ATI TV Wonder 600 has an XC3028L and *not* an XC3028, so we need to load the proper firmware to prevent the device from overheating. Signed-off-by: Devin Heitmueller Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab --- drivers/media/common/tuners/tuner-xc2028.h | 1 + drivers/media/video/em28xx/em28xx-cards.c | 5 ++++- 2 files changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/media/common/tuners/tuner-xc2028.h b/drivers/media/common/tuners/tuner-xc2028.h index 216025cf5d4b..2c5b6282b569 100644 --- a/drivers/media/common/tuners/tuner-xc2028.h +++ b/drivers/media/common/tuners/tuner-xc2028.h @@ -10,6 +10,7 @@ #include "dvb_frontend.h" #define XC2028_DEFAULT_FIRMWARE "xc3028-v27.fw" +#define XC3028L_DEFAULT_FIRMWARE "xc3028L-v36.fw" /* Dmoduler IF (kHz) */ #define XC3028_FE_DEFAULT 0 /* Don't load SCODE */ diff --git a/drivers/media/video/em28xx/em28xx-cards.c b/drivers/media/video/em28xx/em28xx-cards.c index 4d20cda7a1fa..c7456e976655 100644 --- a/drivers/media/video/em28xx/em28xx-cards.c +++ b/drivers/media/video/em28xx/em28xx-cards.c @@ -1530,9 +1530,12 @@ static void em28xx_setup_xc3028(struct em28xx *dev, struct xc2028_ctrl *ctl) /* djh - Not sure which demod we need here */ ctl->demod = XC3028_FE_DEFAULT; break; + case EM2880_BOARD_AMD_ATI_TV_WONDER_HD_600: + ctl->demod = XC3028_FE_DEFAULT; + ctl->fname = XC3028L_DEFAULT_FIRMWARE; + break; case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950: case EM2880_BOARD_PINNACLE_PCTV_HD_PRO: - case EM2880_BOARD_AMD_ATI_TV_WONDER_HD_600: /* FIXME: Better to specify the needed IF */ ctl->demod = XC3028_FE_DEFAULT; break; -- cgit v1.2.3 From 7a9b5fc5fd9e30b58be767722e270f3df651f27c Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Thu, 11 Sep 2008 23:02:12 -0300 Subject: V4L/DVB (8978): sms1xxx: fix product name for Hauppauge WinTV MiniStick Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/siano/sms-cards.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/media/dvb/siano/sms-cards.c b/drivers/media/dvb/siano/sms-cards.c index cc5efb643f33..06297665c9f9 100644 --- a/drivers/media/dvb/siano/sms-cards.c +++ b/drivers/media/dvb/siano/sms-cards.c @@ -87,7 +87,7 @@ static struct sms_board sms_boards[] = { .fw[DEVICE_MODE_DVBT_BDA] = "sms1xxx-nova-b-dvbt-01.fw", }, [SMS1XXX_BOARD_HAUPPAUGE_WINDHAM] = { - .name = "Hauppauge WinTV-Nova-T-MiniStick", + .name = "Hauppauge WinTV MiniStick", .type = SMS_NOVA_B0, .fw[DEVICE_MODE_DVBT_BDA] = "sms1xxx-hcw-55xxx-dvbt-01.fw", }, -- cgit v1.2.3 From 3d843c92da5a1f1ab2cbc2b2e04f84d5ecedf5aa Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Tue, 16 Sep 2008 16:46:42 -0300 Subject: V4L/DVB (8979): sms1xxx: Add new USB product ID for Hauppauge WinTV MiniStick 2040:5510 is the same hardware as 2040:5500 Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/siano/sms-cards.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/media/dvb/siano/sms-cards.c b/drivers/media/dvb/siano/sms-cards.c index 06297665c9f9..9da260fe3fd1 100644 --- a/drivers/media/dvb/siano/sms-cards.c +++ b/drivers/media/dvb/siano/sms-cards.c @@ -40,6 +40,8 @@ struct usb_device_id smsusb_id_table[] = { .driver_info = SMS1XXX_BOARD_HAUPPAUGE_OKEMO_B }, { USB_DEVICE(0x2040, 0x5500), .driver_info = SMS1XXX_BOARD_HAUPPAUGE_WINDHAM }, + { USB_DEVICE(0x2040, 0x5510), + .driver_info = SMS1XXX_BOARD_HAUPPAUGE_WINDHAM }, { USB_DEVICE(0x2040, 0x5580), .driver_info = SMS1XXX_BOARD_HAUPPAUGE_WINDHAM }, { USB_DEVICE(0x2040, 0x5590), -- cgit v1.2.3 From dda06a8e4610757def753ee3a541a0b1a1feb36b Mon Sep 17 00:00:00 2001 From: Andreas Oberritter Date: Wed, 24 Sep 2008 05:00:37 -0300 Subject: V4L/DVB (9029): Fix deadlock in demux code The functions dvb_dmxdev_section_callback, dvb_dmxdev_ts_callback, dvb_dmx_swfilter_packet, dvb_dmx_swfilter_packets, dvb_dmx_swfilter and dvb_dmx_swfilter_204 may be called from both interrupt and process context. Therefore they need to be protected by spin_lock_irqsave() instead of spin_lock(). This fixes a deadlock discovered by lockdep. Signed-off-by: Andreas Oberritter Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/dvb-core/dmxdev.c | 16 +++++++++------- drivers/media/dvb/dvb-core/dvb_demux.c | 16 ++++++++++------ 2 files changed, 19 insertions(+), 13 deletions(-) diff --git a/drivers/media/dvb/dvb-core/dmxdev.c b/drivers/media/dvb/dvb-core/dmxdev.c index 069d847ba887..0c733c66a441 100644 --- a/drivers/media/dvb/dvb-core/dmxdev.c +++ b/drivers/media/dvb/dvb-core/dmxdev.c @@ -364,15 +364,16 @@ static int dvb_dmxdev_section_callback(const u8 *buffer1, size_t buffer1_len, enum dmx_success success) { struct dmxdev_filter *dmxdevfilter = filter->priv; + unsigned long flags; int ret; if (dmxdevfilter->buffer.error) { wake_up(&dmxdevfilter->buffer.queue); return 0; } - spin_lock(&dmxdevfilter->dev->lock); + spin_lock_irqsave(&dmxdevfilter->dev->lock, flags); if (dmxdevfilter->state != DMXDEV_STATE_GO) { - spin_unlock(&dmxdevfilter->dev->lock); + spin_unlock_irqrestore(&dmxdevfilter->dev->lock, flags); return 0; } del_timer(&dmxdevfilter->timer); @@ -391,7 +392,7 @@ static int dvb_dmxdev_section_callback(const u8 *buffer1, size_t buffer1_len, } if (dmxdevfilter->params.sec.flags & DMX_ONESHOT) dmxdevfilter->state = DMXDEV_STATE_DONE; - spin_unlock(&dmxdevfilter->dev->lock); + spin_unlock_irqrestore(&dmxdevfilter->dev->lock, flags); wake_up(&dmxdevfilter->buffer.queue); return 0; } @@ -403,11 +404,12 @@ static int dvb_dmxdev_ts_callback(const u8 *buffer1, size_t buffer1_len, { struct dmxdev_filter *dmxdevfilter = feed->priv; struct dvb_ringbuffer *buffer; + unsigned long flags; int ret; - spin_lock(&dmxdevfilter->dev->lock); + spin_lock_irqsave(&dmxdevfilter->dev->lock, flags); if (dmxdevfilter->params.pes.output == DMX_OUT_DECODER) { - spin_unlock(&dmxdevfilter->dev->lock); + spin_unlock_irqrestore(&dmxdevfilter->dev->lock, flags); return 0; } @@ -417,7 +419,7 @@ static int dvb_dmxdev_ts_callback(const u8 *buffer1, size_t buffer1_len, else buffer = &dmxdevfilter->dev->dvr_buffer; if (buffer->error) { - spin_unlock(&dmxdevfilter->dev->lock); + spin_unlock_irqrestore(&dmxdevfilter->dev->lock, flags); wake_up(&buffer->queue); return 0; } @@ -428,7 +430,7 @@ static int dvb_dmxdev_ts_callback(const u8 *buffer1, size_t buffer1_len, dvb_ringbuffer_flush(buffer); buffer->error = ret; } - spin_unlock(&dmxdevfilter->dev->lock); + spin_unlock_irqrestore(&dmxdevfilter->dev->lock, flags); wake_up(&buffer->queue); return 0; } diff --git a/drivers/media/dvb/dvb-core/dvb_demux.c b/drivers/media/dvb/dvb-core/dvb_demux.c index e2eca0b1fe7c..a2c1fd5d2f67 100644 --- a/drivers/media/dvb/dvb-core/dvb_demux.c +++ b/drivers/media/dvb/dvb-core/dvb_demux.c @@ -399,7 +399,9 @@ static void dvb_dmx_swfilter_packet(struct dvb_demux *demux, const u8 *buf) void dvb_dmx_swfilter_packets(struct dvb_demux *demux, const u8 *buf, size_t count) { - spin_lock(&demux->lock); + unsigned long flags; + + spin_lock_irqsave(&demux->lock, flags); while (count--) { if (buf[0] == 0x47) @@ -407,16 +409,17 @@ void dvb_dmx_swfilter_packets(struct dvb_demux *demux, const u8 *buf, buf += 188; } - spin_unlock(&demux->lock); + spin_unlock_irqrestore(&demux->lock, flags); } EXPORT_SYMBOL(dvb_dmx_swfilter_packets); void dvb_dmx_swfilter(struct dvb_demux *demux, const u8 *buf, size_t count) { + unsigned long flags; int p = 0, i, j; - spin_lock(&demux->lock); + spin_lock_irqsave(&demux->lock, flags); if (demux->tsbufp) { i = demux->tsbufp; @@ -449,17 +452,18 @@ void dvb_dmx_swfilter(struct dvb_demux *demux, const u8 *buf, size_t count) } bailout: - spin_unlock(&demux->lock); + spin_unlock_irqrestore(&demux->lock, flags); } EXPORT_SYMBOL(dvb_dmx_swfilter); void dvb_dmx_swfilter_204(struct dvb_demux *demux, const u8 *buf, size_t count) { + unsigned long flags; int p = 0, i, j; u8 tmppack[188]; - spin_lock(&demux->lock); + spin_lock_irqsave(&demux->lock, flags); if (demux->tsbufp) { i = demux->tsbufp; @@ -500,7 +504,7 @@ void dvb_dmx_swfilter_204(struct dvb_demux *demux, const u8 *buf, size_t count) } bailout: - spin_unlock(&demux->lock); + spin_unlock_irqrestore(&demux->lock, flags); } EXPORT_SYMBOL(dvb_dmx_swfilter_204); -- cgit v1.2.3 From c18c5ffe13e553cf670da521fe09150c36edeb61 Mon Sep 17 00:00:00 2001 From: Patrick Boettcher Date: Sat, 6 Sep 2008 13:31:58 -0300 Subject: V4L/DVB (9037): Fix support for Hauppauge Nova-S SE Different backends have different input busses (saa7146, flexcop). To reflect that a config-option to the s5h1420-driver was added which makes the output mode selectable. Furthermore the s5h1420-driver is now doing the same i2c-method as it was done before adding support for other i2c-users. This patch needs to go into the current release of the kernel, as this driver is currently broken. (Thanks to Eberhard Kaltenhaeuser for helping out to debug this issue.) Signed-off-by: Patrick Boettcher Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/b2c2/flexcop-fe-tuner.c | 1 + drivers/media/dvb/frontends/s5h1420.c | 9 ++++++--- drivers/media/dvb/frontends/s5h1420.h | 8 +++++--- 3 files changed, 12 insertions(+), 6 deletions(-) diff --git a/drivers/media/dvb/b2c2/flexcop-fe-tuner.c b/drivers/media/dvb/b2c2/flexcop-fe-tuner.c index 4eed783f4bce..a127a4175c40 100644 --- a/drivers/media/dvb/b2c2/flexcop-fe-tuner.c +++ b/drivers/media/dvb/b2c2/flexcop-fe-tuner.c @@ -491,6 +491,7 @@ static struct s5h1420_config skystar2_rev2_7_s5h1420_config = { .demod_address = 0x53, .invert = 1, .repeated_start_workaround = 1, + .serial_mpeg = 1, }; static struct itd1000_config skystar2_rev2_7_itd1000_config = { diff --git a/drivers/media/dvb/frontends/s5h1420.c b/drivers/media/dvb/frontends/s5h1420.c index 747d3fa2e5e5..7d6cb39da1d9 100644 --- a/drivers/media/dvb/frontends/s5h1420.c +++ b/drivers/media/dvb/frontends/s5h1420.c @@ -94,8 +94,11 @@ static u8 s5h1420_readreg(struct s5h1420_state *state, u8 reg) if (ret != 3) return ret; } else { - ret = i2c_transfer(state->i2c, &msg[1], 2); - if (ret != 2) + ret = i2c_transfer(state->i2c, &msg[1], 1); + if (ret != 1) + return ret; + ret = i2c_transfer(state->i2c, &msg[2], 1); + if (ret != 1) return ret; } @@ -823,7 +826,7 @@ static int s5h1420_init (struct dvb_frontend* fe) struct s5h1420_state* state = fe->demodulator_priv; /* disable power down and do reset */ - state->CON_1_val = 0x10; + state->CON_1_val = state->config->serial_mpeg << 4; s5h1420_writereg(state, 0x02, state->CON_1_val); msleep(10); s5h1420_reset(state); diff --git a/drivers/media/dvb/frontends/s5h1420.h b/drivers/media/dvb/frontends/s5h1420.h index 4c913f142bc4..ff308136d865 100644 --- a/drivers/media/dvb/frontends/s5h1420.h +++ b/drivers/media/dvb/frontends/s5h1420.h @@ -32,10 +32,12 @@ struct s5h1420_config u8 demod_address; /* does the inversion require inversion? */ - u8 invert : 1; + u8 invert:1; - u8 repeated_start_workaround : 1; - u8 cdclk_polarity : 1; /* 1 == falling edge, 0 == raising edge */ + u8 repeated_start_workaround:1; + u8 cdclk_polarity:1; /* 1 == falling edge, 0 == raising edge */ + + u8 serial_mpeg:1; }; #if defined(CONFIG_DVB_S5H1420) || (defined(CONFIG_DVB_S5H1420_MODULE) && defined(MODULE)) -- cgit v1.2.3 From bda1cda54b7e1654e9416fec76e6342847b25216 Mon Sep 17 00:00:00 2001 From: Patrick Boettcher Date: Sun, 7 Sep 2008 16:04:38 -0300 Subject: V4L/DVB (9043): S5H1420: Fix size of shadow-array to avoid overflow The array size of 'shadow' still needs to be fixed in order to not overflow when reading register 0x00. Thanks to Oliver Endriss for pointing that out. Signed-off-by: Patrick Boettcher Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/frontends/s5h1420.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/media/dvb/frontends/s5h1420.c b/drivers/media/dvb/frontends/s5h1420.c index 7d6cb39da1d9..2e9fd2893ede 100644 --- a/drivers/media/dvb/frontends/s5h1420.c +++ b/drivers/media/dvb/frontends/s5h1420.c @@ -59,7 +59,7 @@ struct s5h1420_state { * it does not support repeated-start, workaround: write addr-1 * and then read */ - u8 shadow[255]; + u8 shadow[256]; }; static u32 s5h1420_getsymbolrate(struct s5h1420_state* state); -- cgit v1.2.3 From fe6c700ff34e68e1eb7991e9c5d18986d0005ac1 Mon Sep 17 00:00:00 2001 From: Ralph Loader Date: Mon, 22 Sep 2008 21:06:48 -0300 Subject: V4L/DVB (9053): fix buffer overflow in uvc-video There is a buffer overflow in drivers/media/video/uvc/uvc_ctrl.c: INFO: 0xf2c5ce08-0xf2c5ce0b. First byte 0xa1 instead of 0xcc INFO: Allocated in uvc_query_v4l2_ctrl+0x3c/0x239 [uvcvideo] age=13 cpu=1 pid=4975 ... A fixed size 8-byte buffer is allocated, and a variable size field is read into it; there is no particular bound on the size of the field (it is dependent on hardware and configuration) and it can overflow [also verified by inserting printk's.] The patch attempts to size the buffer to the correctly. Signed-off-by: Andrew Morton Acked-by: Laurent Pinchart Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/uvc/uvc_ctrl.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/media/video/uvc/uvc_ctrl.c b/drivers/media/video/uvc/uvc_ctrl.c index 6ef3e5297de8..feab12aa2c7b 100644 --- a/drivers/media/video/uvc/uvc_ctrl.c +++ b/drivers/media/video/uvc/uvc_ctrl.c @@ -592,7 +592,7 @@ int uvc_query_v4l2_ctrl(struct uvc_video_device *video, if (ctrl == NULL) return -EINVAL; - data = kmalloc(8, GFP_KERNEL); + data = kmalloc(ctrl->info->size, GFP_KERNEL); if (data == NULL) return -ENOMEM; -- cgit v1.2.3 From 05d3c1e2fb95d3233f6ec0f1d4b9bb07655636b2 Mon Sep 17 00:00:00 2001 From: Shane Date: Sun, 14 Sep 2008 04:17:46 -0300 Subject: V4L/DVB (9075): gspca: Bad check of returned status in i2c_read() spca561. This makes auto gain functional on 04fc:0561. Signed-off-by: Shane Signed-off-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/gspca/spca561.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/media/video/gspca/spca561.c b/drivers/media/video/gspca/spca561.c index cfbc9ebc5c5d..95fcfcb9e31b 100644 --- a/drivers/media/video/gspca/spca561.c +++ b/drivers/media/video/gspca/spca561.c @@ -225,7 +225,7 @@ static int i2c_read(struct gspca_dev *gspca_dev, __u16 reg, __u8 mode) reg_w_val(gspca_dev->dev, 0x8802, (mode | 0x01)); do { reg_r(gspca_dev, 0x8803, 1); - if (!gspca_dev->usb_buf) + if (!gspca_dev->usb_buf[0]) break; } while (--retry); if (retry == 0) -- cgit v1.2.3 From 8d768e14fc57160b35ac13e797a81163baab34d2 Mon Sep 17 00:00:00 2001 From: Jean-Francois Moine Date: Sun, 21 Sep 2008 03:28:55 -0300 Subject: V4L/DVB (9080): gspca: Add a delay after writing to the sonixj sensors. Signed-off-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/gspca/sonixj.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/media/video/gspca/sonixj.c b/drivers/media/video/gspca/sonixj.c index d75b1d20b318..44f86e1f80f0 100644 --- a/drivers/media/video/gspca/sonixj.c +++ b/drivers/media/video/gspca/sonixj.c @@ -707,6 +707,7 @@ static void i2c_w8(struct gspca_dev *gspca_dev, 0x08, 0, /* value, index */ gspca_dev->usb_buf, 8, 500); + msleep(2); } /* read 5 bytes in gspca_dev->usb_buf */ -- cgit v1.2.3 From 674cbc691c5439134bb2ea064c0ee1311fc92384 Mon Sep 17 00:00:00 2001 From: Jean-Francois Moine Date: Thu, 2 Oct 2008 08:06:59 -0300 Subject: V4L/DVB (9092): gspca: Bad init values for sonixj ov7660. Signed-off-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/gspca/sonixj.c | 18 +++++++++++++----- 1 file changed, 13 insertions(+), 5 deletions(-) diff --git a/drivers/media/video/gspca/sonixj.c b/drivers/media/video/gspca/sonixj.c index 44f86e1f80f0..572b0f363b64 100644 --- a/drivers/media/video/gspca/sonixj.c +++ b/drivers/media/video/gspca/sonixj.c @@ -977,13 +977,13 @@ static int sd_init(struct gspca_dev *gspca_dev) case BRIDGE_SN9C105: if (regF1 != 0x11) return -ENODEV; - reg_w(gspca_dev, 0x02, regGpio, 2); + reg_w(gspca_dev, 0x01, regGpio, 2); break; case BRIDGE_SN9C120: if (regF1 != 0x12) return -ENODEV; regGpio[1] = 0x70; - reg_w(gspca_dev, 0x02, regGpio, 2); + reg_w(gspca_dev, 0x01, regGpio, 2); break; default: /* case BRIDGE_SN9C110: */ @@ -1184,7 +1184,7 @@ static void sd_start(struct gspca_dev *gspca_dev) static const __u8 CA[] = { 0x28, 0xd8, 0x14, 0xec }; static const __u8 CE[] = { 0x32, 0xdd, 0x2d, 0xdd }; /* MI0360 */ static const __u8 CE_ov76xx[] = - { 0x32, 0xdd, 0x32, 0xdd }; /* OV7630/48 */ + { 0x32, 0xdd, 0x32, 0xdd }; sn9c1xx = sn_tb[(int) sd->sensor]; configure_gpio(gspca_dev, sn9c1xx); @@ -1224,8 +1224,15 @@ static void sd_start(struct gspca_dev *gspca_dev) reg_w(gspca_dev, 0x20, gamma_def, sizeof gamma_def); for (i = 0; i < 8; i++) reg_w(gspca_dev, 0x84, reg84, sizeof reg84); + switch (sd->sensor) { + case SENSOR_OV7660: + reg_w1(gspca_dev, 0x9a, 0x05); + break; + default: reg_w1(gspca_dev, 0x9a, 0x08); reg_w1(gspca_dev, 0x99, 0x59); + break; + } mode = gspca_dev->cam.cam_mode[(int) gspca_dev->curr_mode].priv; if (mode) @@ -1276,8 +1283,8 @@ static void sd_start(struct gspca_dev *gspca_dev) /* reg1 = 0x44; */ /* reg1 = 0x46; (done) */ } else { - reg17 = 0x22; /* 640 MCKSIZE */ - reg1 = 0x06; + reg17 = 0xa2; /* 640 */ + reg1 = 0x44; } break; } @@ -1286,6 +1293,7 @@ static void sd_start(struct gspca_dev *gspca_dev) switch (sd->sensor) { case SENSOR_OV7630: case SENSOR_OV7648: + case SENSOR_OV7660: reg_w(gspca_dev, 0xce, CE_ov76xx, 4); break; default: -- cgit v1.2.3 From da3808e10faca68b064ac897753fa4e1707d29a4 Mon Sep 17 00:00:00 2001 From: Darron Broad Date: Tue, 30 Sep 2008 02:46:41 -0300 Subject: V4L/DVB (9099): em28xx: Add detection for K-WORLD DVB-T 310U Correct firmware type to MTS Correct audio routing for composite/s-video Add DVB-T detection. This patch uses the eeprom hash method for detection as the vendor/product ids are also used for the DIGIVOX_AD. This may be a clone of the same product. Explanatory text has been added prior to the hask look-up in anticipation that it may help others. The following has been tested to work: Analogue TV (PAL-I) Composite In DVB-T (UK Crystal Palace) USB AUDIO The following has not been tested but probably works: S-Video In Signed-off-by: Darron Broad Signed-off-by: Douglas Schilling Landgraf Signed-off-by: Mauro Carvalho Chehab --- Documentation/video4linux/CARDLIST.em28xx | 2 +- drivers/media/video/em28xx/em28xx-cards.c | 26 +++++++++++++++++++++----- drivers/media/video/em28xx/em28xx-dvb.c | 9 +++++++++ 3 files changed, 31 insertions(+), 6 deletions(-) diff --git a/Documentation/video4linux/CARDLIST.em28xx b/Documentation/video4linux/CARDLIST.em28xx index 89c7f32abf9f..53449cb99b17 100644 --- a/Documentation/video4linux/CARDLIST.em28xx +++ b/Documentation/video4linux/CARDLIST.em28xx @@ -46,7 +46,7 @@ 45 -> Pinnacle PCTV DVB-T (em2870) 46 -> Compro, VideoMate U3 (em2870) [185b:2870] 47 -> KWorld DVB-T 305U (em2880) [eb1a:e305] - 48 -> KWorld DVB-T 310U (em2880) + 48 -> KWorld DVB-T 310U (em2880) [eb1a:e310] 49 -> MSI DigiVox A/D (em2880) [eb1a:e310] 50 -> MSI DigiVox A/D II (em2880) [eb1a:e320] 51 -> Terratec Hybrid XS Secam (em2880) [0ccd:004c] diff --git a/drivers/media/video/em28xx/em28xx-cards.c b/drivers/media/video/em28xx/em28xx-cards.c index c7456e976655..279307cc3adb 100644 --- a/drivers/media/video/em28xx/em28xx-cards.c +++ b/drivers/media/video/em28xx/em28xx-cards.c @@ -930,22 +930,23 @@ struct em28xx_board em28xx_boards[] = { }, [EM2880_BOARD_KWORLD_DVB_310U] = { .name = "KWorld DVB-T 310U", - .valid = EM28XX_BOARD_NOT_VALIDATED, .vchannels = 3, .tuner_type = TUNER_XC2028, + .has_dvb = 1, + .mts_firmware = 1, .decoder = EM28XX_TVP5150, .input = { { .type = EM28XX_VMUX_TELEVISION, .vmux = TVP5150_COMPOSITE0, - .amux = 0, + .amux = EM28XX_AMUX_VIDEO, }, { .type = EM28XX_VMUX_COMPOSITE1, .vmux = TVP5150_COMPOSITE1, - .amux = 1, - }, { + .amux = EM28XX_AMUX_AC97_LINE_IN, + }, { /* S-video has not been tested yet */ .type = EM28XX_VMUX_SVIDEO, .vmux = TVP5150_SVIDEO, - .amux = 1, + .amux = EM28XX_AMUX_AC97_LINE_IN, } }, }, [EM2881_BOARD_DNT_DA2_HYBRID] = { @@ -1260,6 +1261,7 @@ static struct em28xx_reg_seq em2882_terratec_hybrid_xs_digital[] = { static struct em28xx_hash_table em28xx_eeprom_hash [] = { /* P/N: SA 60002070465 Tuner: TVF7533-MF */ {0x6ce05a8f, EM2820_BOARD_PROLINK_PLAYTV_USB2, TUNER_YMEC_TVF_5533MF}, + {0x966a0441, EM2880_BOARD_KWORLD_DVB_310U, TUNER_XC2028}, }; /* I2C devicelist hash table for devices with generic USB IDs */ @@ -1745,6 +1747,20 @@ void em28xx_card_setup(struct em28xx *dev) break; case EM2820_BOARD_UNKNOWN: case EM2800_BOARD_UNKNOWN: + /* + * The K-WORLD DVB-T 310U is detected as an MSI Digivox AD. + * + * This occurs because they share identical USB vendor and + * product IDs. + * + * What we do here is look up the EEPROM hash of the K-WORLD + * and if it is found then we decide that we do not have + * a DIGIVOX and reset the device to the K-WORLD instead. + * + * This solution is only valid if they do not share eeprom + * hash identities which has not been determined as yet. + */ + case EM2880_BOARD_MSI_DIGIVOX_AD: if (!em28xx_hint_board(dev)) em28xx_set_model(dev); break; diff --git a/drivers/media/video/em28xx/em28xx-dvb.c b/drivers/media/video/em28xx/em28xx-dvb.c index 4b992bc0083c..d2b1a1a52689 100644 --- a/drivers/media/video/em28xx/em28xx-dvb.c +++ b/drivers/media/video/em28xx/em28xx-dvb.c @@ -452,6 +452,15 @@ static int dvb_init(struct em28xx *dev) goto out_free; } break; + case EM2880_BOARD_KWORLD_DVB_310U: + dvb->frontend = dvb_attach(zl10353_attach, + &em28xx_zl10353_with_xc3028, + &dev->i2c_adap); + if (attach_xc3028(0x61, dev) < 0) { + result = -EINVAL; + goto out_free; + } + break; default: printk(KERN_ERR "%s/2: The frontend of your DVB/ATSC card" " isn't supported yet\n", -- cgit v1.2.3 From db98fb8b5b9210ba3b14fb984a26060e4afdb9f5 Mon Sep 17 00:00:00 2001 From: Wiktor Grebla Date: Sun, 28 Sep 2008 01:37:48 -0300 Subject: V4L/DVB (9103): em28xx: HVR-900 B3C0 - fix audio clicking issue Fixed audio clicking problem which could be heard when using analog tv or composite input Signed-off-by: Wiktor Grebla Signed-off-by: Douglas Schilling Landgraf Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/em28xx/em28xx-audio.c | 4 ++-- drivers/media/video/em28xx/em28xx-cards.c | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/media/video/em28xx/em28xx-audio.c b/drivers/media/video/em28xx/em28xx-audio.c index 08cb4e7711a5..ac3292d7646c 100644 --- a/drivers/media/video/em28xx/em28xx-audio.c +++ b/drivers/media/video/em28xx/em28xx-audio.c @@ -117,10 +117,10 @@ static void em28xx_audio_isocirq(struct urb *urb) if (oldptr + length >= runtime->buffer_size) { unsigned int cnt = - runtime->buffer_size - oldptr - 1; + runtime->buffer_size - oldptr; memcpy(runtime->dma_area + oldptr * stride, cp, cnt * stride); - memcpy(runtime->dma_area, cp + cnt, + memcpy(runtime->dma_area, cp + cnt * stride, length * stride - cnt * stride); } else { memcpy(runtime->dma_area + oldptr * stride, cp, diff --git a/drivers/media/video/em28xx/em28xx-cards.c b/drivers/media/video/em28xx/em28xx-cards.c index 279307cc3adb..de943cf6c169 100644 --- a/drivers/media/video/em28xx/em28xx-cards.c +++ b/drivers/media/video/em28xx/em28xx-cards.c @@ -577,7 +577,7 @@ struct em28xx_board em28xx_boards[] = { }, { .type = EM28XX_VMUX_COMPOSITE1, .vmux = TVP5150_COMPOSITE1, - .amux = 1, + .amux = 3, }, { .type = EM28XX_VMUX_SVIDEO, .vmux = TVP5150_SVIDEO, -- cgit v1.2.3 From d99e90164e6cf2eb85fa94d547d6336f8127a107 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Sat, 4 Oct 2008 15:55:12 -0700 Subject: x86: gart iommu have direct mapping when agp is present too move init_memory_mapping() out of init_k8_gatt. for: http://bugzilla.kernel.org/show_bug.cgi?id=11676 2.6.27-rc2 to rc8, apgart fails, iommu=soft works, regression This is needed because we need to map the GART aperture even if the GATT is not initialized. Signed-off-by: Yinghai Lu Signed-off-by: Ingo Molnar --- arch/x86/kernel/pci-gart_64.c | 20 +++++++++++--------- 1 file changed, 11 insertions(+), 9 deletions(-) diff --git a/arch/x86/kernel/pci-gart_64.c b/arch/x86/kernel/pci-gart_64.c index 49285f8fd4d5..be33a5442d82 100644 --- a/arch/x86/kernel/pci-gart_64.c +++ b/arch/x86/kernel/pci-gart_64.c @@ -626,7 +626,6 @@ static __init int init_k8_gatt(struct agp_kern_info *info) struct pci_dev *dev; void *gatt; int i, error; - unsigned long start_pfn, end_pfn; printk(KERN_INFO "PCI-DMA: Disabling AGP.\n"); aper_size = aper_base = info->aper_size = 0; @@ -672,12 +671,6 @@ static __init int init_k8_gatt(struct agp_kern_info *info) printk(KERN_INFO "PCI-DMA: aperture base @ %x size %u KB\n", aper_base, aper_size>>10); - /* need to map that range */ - end_pfn = (aper_base>>PAGE_SHIFT) + (aper_size>>PAGE_SHIFT); - if (end_pfn > max_low_pfn_mapped) { - start_pfn = (aper_base>>PAGE_SHIFT); - init_memory_mapping(start_pfn<>PAGE_SHIFT) + (aper_size>>PAGE_SHIFT); + if (end_pfn > max_low_pfn_mapped) { + start_pfn = (aper_base>>PAGE_SHIFT); + init_memory_mapping(start_pfn<> PAGE_SHIFT; -- cgit v1.2.3 From f20f258603ebc5da91e76884cf0c0d7ac9804b1c Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Sun, 5 Oct 2008 18:23:27 +0200 Subject: ide-cd: temporary tray close fix This one fixes http://bugzilla.kernel.org/show_bug.cgi?id=11602. A more generic fix for drives which cannot autoclose tray will follow. Signed-off-by: Borislav Petkov Cc: Jens Axboe [bart: add an extra parentheses for consistency with the rest of kernel code] Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-cd.c | 5 ++++- include/linux/ide.h | 4 +++- 2 files changed, 7 insertions(+), 2 deletions(-) diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c index 49a8c589e346..e1cd7d520fc0 100644 --- a/drivers/ide/ide-cd.c +++ b/drivers/ide/ide-cd.c @@ -1661,7 +1661,9 @@ static int ide_cdrom_probe_capabilities(ide_drive_t *drive) cdi->mask &= ~CDC_PLAY_AUDIO; mechtype = buf[8 + 6] >> 5; - if (mechtype == mechtype_caddy || mechtype == mechtype_popup) + if (mechtype == mechtype_caddy || + mechtype == mechtype_popup || + (drive->atapi_flags & IDE_AFLAG_NO_AUTOCLOSE)) cdi->mask |= CDC_CLOSE_TRAY; if (cdi->sanyo_slot > 0) { @@ -1859,6 +1861,7 @@ static const struct cd_list_entry ide_cd_quirks_list[] = { { "MATSHITADVD-ROM SR-8176", NULL, IDE_AFLAG_PLAY_AUDIO_OK }, { "MATSHITADVD-ROM SR-8174", NULL, IDE_AFLAG_PLAY_AUDIO_OK }, { "Optiarc DVD RW AD-5200A", NULL, IDE_AFLAG_PLAY_AUDIO_OK }, + { "Optiarc DVD RW AD-7543A", NULL, IDE_AFLAG_NO_AUTOCLOSE }, { NULL, NULL, 0 } }; diff --git a/include/linux/ide.h b/include/linux/ide.h index 1524829f73f2..6514db8fd2e4 100644 --- a/include/linux/ide.h +++ b/include/linux/ide.h @@ -366,7 +366,9 @@ enum { /* Currently on a filemark */ IDE_AFLAG_FILEMARK = (1 << 25), /* 0 = no tape is loaded, so we don't rewind after ejecting */ - IDE_AFLAG_MEDIUM_PRESENT = (1 << 26) + IDE_AFLAG_MEDIUM_PRESENT = (1 << 26), + + IDE_AFLAG_NO_AUTOCLOSE = (1 << 27), }; struct ide_drive_s { -- cgit v1.2.3 From 22e05b4549bf2405d6aca128540b20cd2dd33f1f Mon Sep 17 00:00:00 2001 From: Sergei Shtylylov Date: Sun, 5 Oct 2008 18:23:27 +0200 Subject: ide-dma: fix ide_build_dmatable() for TRM290 Apparently, 'xcount' being 0 does not mean 0 bytes for TRM290; it means 4 bytes, judging from the code immediately preceding this check. So, we must never try to "split" the PRD for TRM290. This is probably never hit anyway -- with the DMA buffers aligned to at least 512 bytes and ATAPI DMA not being used for non block I/O commands... Signed-off-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-dma.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/ide/ide-dma.c b/drivers/ide/ide-dma.c index adc682755857..3fa07c0aeaa4 100644 --- a/drivers/ide/ide-dma.c +++ b/drivers/ide/ide-dma.c @@ -211,7 +211,7 @@ int ide_build_dmatable (ide_drive_t *drive, struct request *rq) xcount = bcount & 0xffff; if (is_trm290) xcount = ((xcount >> 2) - 1) << 16; - if (xcount == 0x0000) { + else if (xcount == 0x0000) { /* * Most chipsets correctly interpret a length of 0x0000 as 64KB, * but at least one (e.g. CS5530) misinterprets it as zero (!). -- cgit v1.2.3 From 2fef357cf391b56b8b6952a412f7324e50427a77 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Sun, 5 Oct 2008 18:23:28 +0200 Subject: IDE: Fix platform device registration in Swarm IDE driver (v2) The Swarm IDE driver uses a release method which is defined in the driver itself thus potentially oopsable. The simple fix would be to just leak the device but this patch goes the full length and moves the entire handling of the platform device in the platform code and retains only the platform driver code in drivers/ide/mips/swarm.c. Signed-off-by: Ralf Baechle Cc: "Maciej W. Rozycki" Acked-by: Sergei Shtylyov [bart: remove no longer needed BLK_DEV_IDE_SWARM from ide/Kconfig] Signed-off-by: Bartlomiej Zolnierkiewicz --- arch/mips/sibyte/swarm/Makefile | 3 +- arch/mips/sibyte/swarm/platform.c | 81 ++++++++++++++++ drivers/ide/Kconfig | 4 - drivers/ide/mips/Makefile | 1 - drivers/ide/mips/swarm.c | 197 -------------------------------------- 5 files changed, 83 insertions(+), 203 deletions(-) create mode 100644 arch/mips/sibyte/swarm/platform.c delete mode 100644 drivers/ide/mips/swarm.c diff --git a/arch/mips/sibyte/swarm/Makefile b/arch/mips/sibyte/swarm/Makefile index f18ba9201bbc..7b45f199d92a 100644 --- a/arch/mips/sibyte/swarm/Makefile +++ b/arch/mips/sibyte/swarm/Makefile @@ -1,3 +1,4 @@ -obj-y := setup.o rtc_xicor1241.o rtc_m41t81.o +obj-y := platform.o setup.o rtc_xicor1241.o \ + rtc_m41t81.o obj-$(CONFIG_I2C_BOARDINFO) += swarm-i2c.o diff --git a/arch/mips/sibyte/swarm/platform.c b/arch/mips/sibyte/swarm/platform.c new file mode 100644 index 000000000000..dd0e5b9b64e8 --- /dev/null +++ b/arch/mips/sibyte/swarm/platform.c @@ -0,0 +1,81 @@ +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#define DRV_NAME "pata-swarm" + +#define SWARM_IDE_SHIFT 5 +#define SWARM_IDE_BASE 0x1f0 +#define SWARM_IDE_CTRL 0x3f6 + +static struct resource swarm_pata_resource[] = { + { + .name = "Swarm GenBus IDE", + .flags = IORESOURCE_MEM, + }, { + .name = "Swarm GenBus IDE", + .flags = IORESOURCE_MEM, + }, { + .name = "Swarm GenBus IDE", + .flags = IORESOURCE_IRQ, + .start = K_INT_GB_IDE, + .end = K_INT_GB_IDE, + }, +}; + +static struct pata_platform_info pata_platform_data = { + .ioport_shift = SWARM_IDE_SHIFT, +}; + +static struct platform_device swarm_pata_device = { + .name = "pata_platform", + .id = -1, + .resource = swarm_pata_resource, + .num_resources = ARRAY_SIZE(swarm_pata_resource), + .dev = { + .platform_data = &pata_platform_data, + .coherent_dma_mask = ~0, /* grumble */ + }, +}; + +static int __init swarm_pata_init(void) +{ + u8 __iomem *base; + phys_t offset, size; + struct resource *r; + + if (!SIBYTE_HAVE_IDE) + return -ENODEV; + + base = ioremap(A_IO_EXT_BASE, 0x800); + offset = __raw_readq(base + R_IO_EXT_REG(R_IO_EXT_START_ADDR, IDE_CS)); + size = __raw_readq(base + R_IO_EXT_REG(R_IO_EXT_MULT_SIZE, IDE_CS)); + iounmap(base); + + offset = G_IO_START_ADDR(offset) << S_IO_ADDRBASE; + size = (G_IO_MULT_SIZE(size) + 1) << S_IO_REGSIZE; + if (offset < A_PHYS_GENBUS || offset >= A_PHYS_GENBUS_END) { + pr_info(DRV_NAME ": PATA interface at GenBus disabled\n"); + + return -EBUSY; + } + + pr_info(DRV_NAME ": PATA interface at GenBus slot %i\n", IDE_CS); + + r = swarm_pata_resource; + r[0].start = offset + (SWARM_IDE_BASE << SWARM_IDE_SHIFT); + r[0].end = offset + ((SWARM_IDE_BASE + 8) << SWARM_IDE_SHIFT) - 1; + r[1].start = offset + (SWARM_IDE_CTRL << SWARM_IDE_SHIFT); + r[1].end = offset + ((SWARM_IDE_CTRL + 1) << SWARM_IDE_SHIFT) - 1; + + return platform_device_register(&swarm_pata_device); +} + +device_initcall(swarm_pata_init); diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig index 8e93a797c93d..052879a6f853 100644 --- a/drivers/ide/Kconfig +++ b/drivers/ide/Kconfig @@ -780,10 +780,6 @@ config BLK_DEV_IDEDMA_PMAC to transfer data to and from memory. Saying Y is safe and improves performance. -config BLK_DEV_IDE_SWARM - tristate "IDE for Sibyte evaluation boards" - depends on SIBYTE_SB1xxx_SOC - config BLK_DEV_IDE_AU1XXX bool "IDE for AMD Alchemy Au1200" depends on SOC_AU1200 diff --git a/drivers/ide/mips/Makefile b/drivers/ide/mips/Makefile index 677c7b2bac92..5873fa0b8769 100644 --- a/drivers/ide/mips/Makefile +++ b/drivers/ide/mips/Makefile @@ -1,4 +1,3 @@ -obj-$(CONFIG_BLK_DEV_IDE_SWARM) += swarm.o obj-$(CONFIG_BLK_DEV_IDE_AU1XXX) += au1xxx-ide.o EXTRA_CFLAGS := -Idrivers/ide diff --git a/drivers/ide/mips/swarm.c b/drivers/ide/mips/swarm.c deleted file mode 100644 index 39c9ee995857..000000000000 --- a/drivers/ide/mips/swarm.c +++ /dev/null @@ -1,197 +0,0 @@ -/* - * Copyright (C) 2001, 2002, 2003 Broadcom Corporation - * Copyright (C) 2004 MontaVista Software Inc. - * Author: Manish Lachwani, mlachwani@mvista.com - * Copyright (C) 2004 MIPS Technologies, Inc. All rights reserved. - * Author: Maciej W. Rozycki - * Copyright (c) 2006, 2008 Maciej W. Rozycki - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. - */ - -/* - * Derived loosely from ide-pmac.c, so: - * Copyright (C) 1998 Paul Mackerras. - * Copyright (C) 1995-1998 Mark Lord - */ - -/* - * Boards with SiByte processors so far have supported IDE devices via - * the Generic Bus, PCI bus, and built-in PCMCIA interface. In all - * cases, byte-swapping must be avoided for these devices (whereas - * other PCI devices, for example, will require swapping). Any - * SiByte-targetted kernel including IDE support will include this - * file. Probing of a Generic Bus for an IDE device is controlled by - * the definition of "SIBYTE_HAVE_IDE", which is provided by - * for Broadcom boards. - */ - -#include -#include -#include -#include -#include - -#include - -#include -#include -#include - -#define DRV_NAME "ide-swarm" - -static char swarm_ide_string[] = DRV_NAME; - -static struct resource swarm_ide_resource = { - .name = "SWARM GenBus IDE", - .flags = IORESOURCE_MEM, -}; - -static struct platform_device *swarm_ide_dev; - -static const struct ide_port_info swarm_port_info = { - .name = DRV_NAME, - .host_flags = IDE_HFLAG_MMIO | IDE_HFLAG_NO_DMA, -}; - -/* - * swarm_ide_probe - if the board header indicates the existence of - * Generic Bus IDE, allocate a HWIF for it. - */ -static int __devinit swarm_ide_probe(struct device *dev) -{ - u8 __iomem *base; - struct ide_host *host; - phys_t offset, size; - int i, rc; - hw_regs_t hw, *hws[] = { &hw, NULL, NULL, NULL }; - - if (!SIBYTE_HAVE_IDE) - return -ENODEV; - - base = ioremap(A_IO_EXT_BASE, 0x800); - offset = __raw_readq(base + R_IO_EXT_REG(R_IO_EXT_START_ADDR, IDE_CS)); - size = __raw_readq(base + R_IO_EXT_REG(R_IO_EXT_MULT_SIZE, IDE_CS)); - iounmap(base); - - offset = G_IO_START_ADDR(offset) << S_IO_ADDRBASE; - size = (G_IO_MULT_SIZE(size) + 1) << S_IO_REGSIZE; - if (offset < A_PHYS_GENBUS || offset >= A_PHYS_GENBUS_END) { - printk(KERN_INFO DRV_NAME - ": IDE interface at GenBus disabled\n"); - return -EBUSY; - } - - printk(KERN_INFO DRV_NAME ": IDE interface at GenBus slot %i\n", - IDE_CS); - - swarm_ide_resource.start = offset; - swarm_ide_resource.end = offset + size - 1; - if (request_resource(&iomem_resource, &swarm_ide_resource)) { - printk(KERN_ERR DRV_NAME - ": can't request I/O memory resource\n"); - return -EBUSY; - } - - base = ioremap(offset, size); - - memset(&hw, 0, sizeof(hw)); - for (i = 0; i <= 7; i++) - hw.io_ports_array[i] = - (unsigned long)(base + ((0x1f0 + i) << 5)); - hw.io_ports.ctl_addr = - (unsigned long)(base + (0x3f6 << 5)); - hw.irq = K_INT_GB_IDE; - hw.chipset = ide_generic; - - rc = ide_host_add(&swarm_port_info, hws, &host); - if (rc) - goto err; - - dev_set_drvdata(dev, host); - - return 0; -err: - release_resource(&swarm_ide_resource); - iounmap(base); - return rc; -} - -static struct device_driver swarm_ide_driver = { - .name = swarm_ide_string, - .bus = &platform_bus_type, - .probe = swarm_ide_probe, -}; - -static void swarm_ide_platform_release(struct device *device) -{ - struct platform_device *pldev; - - /* free device */ - pldev = to_platform_device(device); - kfree(pldev); -} - -static int __devinit swarm_ide_init_module(void) -{ - struct platform_device *pldev; - int err; - - printk(KERN_INFO "SWARM IDE driver\n"); - - if (driver_register(&swarm_ide_driver)) { - printk(KERN_ERR "Driver registration failed\n"); - err = -ENODEV; - goto out; - } - - if (!(pldev = kzalloc(sizeof (*pldev), GFP_KERNEL))) { - err = -ENOMEM; - goto out_unregister_driver; - } - - pldev->name = swarm_ide_string; - pldev->id = 0; - pldev->dev.release = swarm_ide_platform_release; - - if (platform_device_register(pldev)) { - err = -ENODEV; - goto out_free_pldev; - } - - if (!pldev->dev.driver) { - /* - * The driver was not bound to this device, there was - * no hardware at this address. Unregister it, as the - * release fuction will take care of freeing the - * allocated structure - */ - platform_device_unregister (pldev); - } - - swarm_ide_dev = pldev; - - return 0; - -out_free_pldev: - kfree(pldev); - -out_unregister_driver: - driver_unregister(&swarm_ide_driver); -out: - return err; -} - -module_init(swarm_ide_init_module); -- cgit v1.2.3 From f3e85ee70a8dd18e6ffa933ae4065a7031837cf3 Mon Sep 17 00:00:00 2001 From: Bodo Eggert <7eggert@gmx.de> Date: Sun, 5 Oct 2008 18:23:28 +0200 Subject: ide-cd: Optiarc DVD RW AD-7200A does play audio The Optiarc DVD RW AD-7200A can play audio, but tells it could not. Signed-off-by: Bodo Eggert <7eggert@gmx.de> Tested-by: Nick Warne Received-from: Borislav Petkov [bart: keep "audio" quirks together] Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-cd.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c index e1cd7d520fc0..f16bb4667238 100644 --- a/drivers/ide/ide-cd.c +++ b/drivers/ide/ide-cd.c @@ -1861,6 +1861,7 @@ static const struct cd_list_entry ide_cd_quirks_list[] = { { "MATSHITADVD-ROM SR-8176", NULL, IDE_AFLAG_PLAY_AUDIO_OK }, { "MATSHITADVD-ROM SR-8174", NULL, IDE_AFLAG_PLAY_AUDIO_OK }, { "Optiarc DVD RW AD-5200A", NULL, IDE_AFLAG_PLAY_AUDIO_OK }, + { "Optiarc DVD RW AD-7200A", NULL, IDE_AFLAG_PLAY_AUDIO_OK }, { "Optiarc DVD RW AD-7543A", NULL, IDE_AFLAG_NO_AUTOCLOSE }, { NULL, NULL, 0 } }; -- cgit v1.2.3 From ca09a237b8c6b053e101a4a83bc30d2c48435bd5 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Sun, 5 Oct 2008 18:23:28 +0200 Subject: ide: workaround for bogus gcc warning in ide_sysfs_register_port() Reported-by: "Steven Noonan" Suggested-by: "Elias Oltmanns" Cc: mingo@elte.hu Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-probe.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c index 994e41099b42..a51a30e9eab3 100644 --- a/drivers/ide/ide-probe.c +++ b/drivers/ide/ide-probe.c @@ -1492,7 +1492,7 @@ static struct device_attribute *ide_port_attrs[] = { static int ide_sysfs_register_port(ide_hwif_t *hwif) { - int i, rc; + int i, uninitialized_var(rc); for (i = 0; ide_port_attrs[i]; i++) { rc = device_create_file(hwif->portdev, ide_port_attrs[i]); -- cgit v1.2.3 From 4a16ff4c692d49f0caeabe08e6d3ae28a0ad4d04 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Sat, 4 Oct 2008 00:06:29 +0100 Subject: [MIPS] Fix CMP Kconfig configuration and mark as broken. Because sync-r4k.c doesn't build. Signed-off-by: Ralf Baechle --- arch/mips/Kconfig | 27 ++++++++++++++++----------- 1 file changed, 16 insertions(+), 11 deletions(-) diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index c930b8ceb418..1e06d233fa83 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -211,6 +211,7 @@ config MIPS_MALTA select SYS_SUPPORTS_64BIT_KERNEL select SYS_SUPPORTS_BIG_ENDIAN select SYS_SUPPORTS_LITTLE_ENDIAN + select SYS_SUPPORTS_MIPS_CMP if BROKEN # because SYNC_R4K is broken select SYS_SUPPORTS_MULTITHREADING select SYS_SUPPORTS_SMARTMIPS help @@ -1499,6 +1500,18 @@ config MIPS_APSP_KSPD "exit" syscall notifying other kernel modules the SP program is exiting. You probably want to say yes here. +config MIPS_CMP + bool "MIPS CMP framework support" + depends on SYS_SUPPORTS_MIPS_CMP + select SYNC_R4K if BROKEN + select SYS_SUPPORTS_SMP + select SYS_SUPPORTS_SCHED_SMT if SMP + select WEAK_ORDERING + default n + help + This is a placeholder option for the GCMP work. It will need to + be handled differently... + config SB1_PASS_1_WORKAROUNDS bool depends on CPU_SB1_PASS_1 @@ -1675,6 +1688,9 @@ config SMP config SMP_UP bool +config SYS_SUPPORTS_MIPS_CMP + bool + config SYS_SUPPORTS_SMP bool @@ -1722,17 +1738,6 @@ config NR_CPUS performance should round up your number of processors to the next power of two. -config MIPS_CMP - bool "MIPS CMP framework support" - depends on SMP - select SYNC_R4K - select SYS_SUPPORTS_SCHED_SMT - select WEAK_ORDERING - default n - help - This is a placeholder option for the GCMP work. It will need to - be handled differently... - source "kernel/time/Kconfig" # -- cgit v1.2.3 From fd3d2764ee5aad862e51c21b8239561acdea8c2f Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Fri, 3 Oct 2008 22:43:38 +0100 Subject: [MIPS] IP27: Fix build errors if CONFIG_MAPPED_KERNEL=y Signed-off-by: Ralf Baechle --- arch/mips/kernel/head.S | 1 + include/asm-mips/sn/mapped_kernel.h | 8 ++++---- 2 files changed, 5 insertions(+), 4 deletions(-) diff --git a/arch/mips/kernel/head.S b/arch/mips/kernel/head.S index 361364501d34..492a0a8d70fb 100644 --- a/arch/mips/kernel/head.S +++ b/arch/mips/kernel/head.S @@ -22,6 +22,7 @@ #include #include #include +#include #include #include diff --git a/include/asm-mips/sn/mapped_kernel.h b/include/asm-mips/sn/mapped_kernel.h index c3dd5d0d525f..721496a0bb92 100644 --- a/include/asm-mips/sn/mapped_kernel.h +++ b/include/asm-mips/sn/mapped_kernel.h @@ -5,6 +5,8 @@ #ifndef __ASM_SN_MAPPED_KERNEL_H #define __ASM_SN_MAPPED_KERNEL_H +#include + /* * Note on how mapped kernels work: the text and data section is * compiled at cksseg segment (LOADADDR = 0xc001c000), and the @@ -29,10 +31,8 @@ #define MAPPED_ADDR_RO_TO_PHYS(x) (x - REP_BASE) #define MAPPED_ADDR_RW_TO_PHYS(x) (x - REP_BASE - 16777216) -#define MAPPED_KERN_RO_PHYSBASE(n) \ - (PLAT_NODE_DATA(n)->kern_vars.kv_ro_baseaddr) -#define MAPPED_KERN_RW_PHYSBASE(n) \ - (PLAT_NODE_DATA(n)->kern_vars.kv_rw_baseaddr) +#define MAPPED_KERN_RO_PHYSBASE(n) (hub_data(n)->kern_vars.kv_ro_baseaddr) +#define MAPPED_KERN_RW_PHYSBASE(n) (hub_data(n)->kern_vars.kv_rw_baseaddr) #define MAPPED_KERN_RO_TO_PHYS(x) \ ((unsigned long)MAPPED_ADDR_RO_TO_PHYS(x) | \ -- cgit v1.2.3 From e84956f92a846246b09b34f2a728329c386d250f Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Mon, 6 Oct 2008 11:59:29 +0200 Subject: x86 ACPI: Blacklist two HP machines with buggy BIOSes There is a bug in the BIOSes of some HP boxes with AMD Turions which connects IO-APIC pins with ACPI thermal trip points in such a way that if the state of the IO-APIC is not as expected by the (buggy) BIOS, the thermal trip points are set to insanely low values (usually all of them become 16 degrees Celsius). As a result, thermal throttling kicks in and knock the system down to its shoes. Unfortunately some of the recent IO-APIC changes made the bug show up. To prevent this from happening, blacklist machines that are known to be affected (nx6115 and 6715b in this particular case). This fixes http://bugzilla.kernel.org/show_bug.cgi?id=11516 listed as a regression from 2.6.26. On my box it was caused by: commit 691874fa96d6349a8b60f8ea9c2bae52ece79941 Author: Maciej W. Rozycki Date: Tue May 27 21:19:51 2008 +0100 x86: I/O APIC: timer through 8259A second-chance Signed-off-by: Maciej W. Rozycki Signed-off-by: Ingo Molnar and the whole story is described in this (huge) thread: http://marc.info/?l=linux-kernel&m=121358440508410&w=4 Matthew Garrett told us about that happening on the nx6125: http://marc.info/?l=linux-kernel&m=121396307411930&w=4 and then Maciej analysed the breakage on the basis of a DSDT from the nx6325: http://marc.info/?l=linux-kernel&m=121401068718826&w=4 As far as the Dmitry's and Jason's boxes are concerned, I recognized the symptoms and asked them to verify that the blacklisting helped. It appears that the buggy BIOS code has been copy-pasted to the entire range of machines, for no good reason. Signed-off-by: Rafael J. Wysocki Tested-by: Dmitry Torokhov Tested-by: Jason Vas Dias Signed-off-by: Linus Torvalds --- arch/x86/kernel/acpi/boot.c | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c index bfd10fd211cd..c102af85df9c 100644 --- a/arch/x86/kernel/acpi/boot.c +++ b/arch/x86/kernel/acpi/boot.c @@ -1603,6 +1603,14 @@ static struct dmi_system_id __initdata acpi_dmi_table[] = { * is not connected at all. Force ignoring BIOS IRQ0 pin2 * override in that cases. */ + { + .callback = dmi_ignore_irq0_timer_override, + .ident = "HP nx6115 laptop", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), + DMI_MATCH(DMI_PRODUCT_NAME, "HP Compaq nx6115"), + }, + }, { .callback = dmi_ignore_irq0_timer_override, .ident = "HP NX6125 laptop", @@ -1619,6 +1627,14 @@ static struct dmi_system_id __initdata acpi_dmi_table[] = { DMI_MATCH(DMI_PRODUCT_NAME, "HP Compaq nx6325"), }, }, + { + .callback = dmi_ignore_irq0_timer_override, + .ident = "HP 6715b laptop", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), + DMI_MATCH(DMI_PRODUCT_NAME, "HP Compaq 6715b"), + }, + }, {} }; -- cgit v1.2.3 From e85ceae9102f6e3c1d707e7ac88fa48d252e9cfa Mon Sep 17 00:00:00 2001 From: Jan Kiszka Date: Mon, 6 Oct 2008 13:50:59 -0500 Subject: kgdb, x86: Avoid invoking kgdb_nmicallback twice per NMI Stress-testing KVM's latest NMI support with kgdbts inside an SMP guest, I came across spurious unhandled NMIs while running the singlestep test. Looking closer at the code path each NMI takes when KGDB is enabled, I noticed that kgdb_nmicallback is called twice per event: One time via DIE_NMI_IPI notification, the second time on DIE_NMI. Removing the first invocation cures the unhandled NMIs here. Signed-off-by: Jan Kiszka Signed-off-by: Jason Wessel --- arch/x86/kernel/kgdb.c | 7 +------ 1 file changed, 1 insertion(+), 6 deletions(-) diff --git a/arch/x86/kernel/kgdb.c b/arch/x86/kernel/kgdb.c index 8282a2139681..10435a120d22 100644 --- a/arch/x86/kernel/kgdb.c +++ b/arch/x86/kernel/kgdb.c @@ -455,12 +455,7 @@ static int __kgdb_notify(struct die_args *args, unsigned long cmd) return NOTIFY_DONE; case DIE_NMI_IPI: - if (atomic_read(&kgdb_active) != -1) { - /* KGDB CPU roundup */ - kgdb_nmicallback(raw_smp_processor_id(), regs); - was_in_debug_nmi[raw_smp_processor_id()] = 1; - touch_nmi_watchdog(); - } + /* Just ignore, we will handle the roundup on DIE_NMI. */ return NOTIFY_DONE; case DIE_NMIUNKNOWN: -- cgit v1.2.3 From cc1e0f4f7ad95a9eb81e1904cb16068af226180d Mon Sep 17 00:00:00 2001 From: Jason Wessel Date: Mon, 6 Oct 2008 13:50:59 -0500 Subject: kgdb: call touch_softlockup_watchdog on resume The softlockup watchdog needs to be touched when resuming the from the kgdb stopped state to avoid the printk that a CPU is stuck if the debugger was active for longer than the softlockup threshold. Signed-off-by: Jason Wessel --- kernel/kgdb.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/kernel/kgdb.c b/kernel/kgdb.c index 25d955dbb989..e4dcfb2272a4 100644 --- a/kernel/kgdb.c +++ b/kernel/kgdb.c @@ -590,6 +590,7 @@ static void kgdb_wait(struct pt_regs *regs) /* Signal the primary CPU that we are done: */ atomic_set(&cpu_in_kgdb[cpu], 0); + touch_softlockup_watchdog(); clocksource_touch_watchdog(); local_irq_restore(flags); } @@ -1432,6 +1433,7 @@ acquirelock: atomic_read(&kgdb_cpu_doing_single_step) != cpu) { atomic_set(&kgdb_active, -1); + touch_softlockup_watchdog(); clocksource_touch_watchdog(); local_irq_restore(flags); @@ -1524,6 +1526,7 @@ acquirelock: kgdb_restore: /* Free kgdb_active */ atomic_set(&kgdb_active, -1); + touch_softlockup_watchdog(); clocksource_touch_watchdog(); local_irq_restore(flags); -- cgit v1.2.3 From e683b423007b9befec30c672c695d0e6abf87493 Mon Sep 17 00:00:00 2001 From: Haavard Skinnemoen Date: Mon, 6 Oct 2008 20:09:53 +0200 Subject: atmel-mci: Initialize BLKR before sending data transfer command The atmel-mci driver sometimes fails data transfers like this: mmcblk0: error -5 transferring data end_request: I/O error, dev mmcblk0, sector 2749769 end_request: I/O error, dev mmcblk0, sector 2749777 It turns out that this might be caused by the BLKR register (which contains the block size and the number of blocks being transfered) being initialized too late. This patch moves the initialization of BLKR so that it contains the correct value before the block transfer command is sent. This error is difficult to reproduce, but if you insert a long delay (mdelay(10) or thereabouts) between the calls to atmci_start_command() and atmci_submit_data(), all transfers seem to fail without this patch, while I haven't seen any failures with this patch. Reported-by: Hein_Tibosch Signed-off-by: Haavard Skinnemoen Signed-off-by: Pierre Ossman Signed-off-by: Linus Torvalds --- drivers/mmc/host/atmel-mci.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c index 917035e16da4..00008967ef7a 100644 --- a/drivers/mmc/host/atmel-mci.c +++ b/drivers/mmc/host/atmel-mci.c @@ -426,8 +426,6 @@ static u32 atmci_submit_data(struct mmc_host *mmc, struct mmc_data *data) host->sg = NULL; host->data = data; - mci_writel(host, BLKR, MCI_BCNT(data->blocks) - | MCI_BLKLEN(data->blksz)); dev_vdbg(&mmc->class_dev, "BLKR=0x%08x\n", MCI_BCNT(data->blocks) | MCI_BLKLEN(data->blksz)); @@ -483,6 +481,10 @@ static void atmci_request(struct mmc_host *mmc, struct mmc_request *mrq) if (data->blocks > 1 && data->blksz & 3) goto fail; atmci_set_timeout(host, data); + + /* Must set block count/size before sending command */ + mci_writel(host, BLKR, MCI_BCNT(data->blocks) + | MCI_BLKLEN(data->blksz)); } iflags = MCI_CMDRDY; -- cgit v1.2.3 From 87f3b6b6fbcbfa715f0d0db3e7a63e65716a6d4e Mon Sep 17 00:00:00 2001 From: Mathieu Desnoyers Date: Mon, 6 Oct 2008 09:30:12 -0400 Subject: Marker depmod fix core kernel list * Theodore Ts'o (tytso@mit.edu) wrote: > > I've been playing with adding some markers into ext4 to see if they > could be useful in solving some problems along with Systemtap. It > appears, though, that as of 2.6.27-rc8, markers defined in code which is > compiled directly into the kernel (i.e., not as modules) don't show up > in Module.markers: > > kvm_trace_entryexit arch/x86/kvm/kvm-intel %u %p %u %u %u %u %u %u > kvm_trace_handler arch/x86/kvm/kvm-intel %u %p %u %u %u %u %u %u > kvm_trace_entryexit arch/x86/kvm/kvm-amd %u %p %u %u %u %u %u %u > kvm_trace_handler arch/x86/kvm/kvm-amd %u %p %u %u %u %u %u %u > > (Note the lack of any of the kernel_sched_* markers, and the markers I > added for ext4_* and jbd2_* are missing as wel.) > > Systemtap apparently depends on in-kernel trace_mark being recorded in > Module.markers, and apparently it's been claimed that it used to be > there. Is this a bug in systemtap, or in how Module.markers is getting > built? And is there a file that contains the equivalent information > for markers located in non-modules code? I think the problem comes from "markers: fix duplicate modpost entry" (commit d35cb360c29956510b2fe1a953bd4968536f7216) Especially : - add_marker(mod, marker, fmt); + if (!mod->skip) + add_marker(mod, marker, fmt); } return; fail: Here is a fix that should take care if this problem. Thanks for the bug report! Signed-off-by: Mathieu Desnoyers Tested-by: "Theodore Ts'o" CC: Greg KH CC: David Smith CC: Roland McGrath CC: Sam Ravnborg CC: Wenji Huang CC: Takashi Nishiie Signed-off-by: Linus Torvalds --- scripts/mod/modpost.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/scripts/mod/modpost.c b/scripts/mod/modpost.c index 418cd7dbbc93..8e0de6a5e18a 100644 --- a/scripts/mod/modpost.c +++ b/scripts/mod/modpost.c @@ -1986,11 +1986,13 @@ static void read_markers(const char *fname) mod = find_module(modname); if (!mod) { - if (is_vmlinux(modname)) - have_vmlinux = 1; mod = new_module(NOFAIL(strdup(modname))); mod->skip = 1; } + if (is_vmlinux(modname)) { + have_vmlinux = 1; + mod->skip = 0; + } if (!mod->skip) add_marker(mod, marker, fmt); -- cgit v1.2.3 From 4330ed8ed4da360ac1ca14b0fddff4c05b10de16 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Mon, 6 Oct 2008 16:39:58 -0700 Subject: Linux 2.6.27-rc9 --- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Makefile b/Makefile index 1d03c1644ddb..ce9eceb2538e 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ VERSION = 2 PATCHLEVEL = 6 SUBLEVEL = 27 -EXTRAVERSION = -rc8 +EXTRAVERSION = -rc9 NAME = Rotary Wombat # *DOCUMENTATION* -- cgit v1.2.3 From a2b7ba9ca471438c2bb0c3bdf0ff2ed7fdce3d2f Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Tue, 7 Oct 2008 22:26:09 +0100 Subject: [ARM] S3C24XX: Move files out of include/asm-arm/plat-s3c* First move of items out of include/asm-arm/plat-s3c* to their new homes under arch/arm/plat-s3c/include/plat and arch/arm/plat-s3c24xx/include/plat directories. Note, we have to create a dummy arch/arm/plat-s3c/Makefile to allow us to add arch/arm/plat-s3c/include/plat to the path. Signed-off-by: Ben Dooks --- arch/arm/Makefile | 2 +- arch/arm/mach-s3c2410/bast-irq.c | 2 +- arch/arm/mach-s3c2410/clock.c | 6 +- arch/arm/mach-s3c2410/dma.c | 4 +- arch/arm/mach-s3c2410/include/mach/debug-macro.S | 4 +- arch/arm/mach-s3c2410/irq.c | 4 +- arch/arm/mach-s3c2410/mach-amlm5900.c | 6 +- arch/arm/mach-s3c2410/mach-bast.c | 6 +- arch/arm/mach-s3c2410/mach-h1940.c | 8 +- arch/arm/mach-s3c2410/mach-n30.c | 8 +- arch/arm/mach-s3c2410/mach-otom.c | 8 +- arch/arm/mach-s3c2410/mach-qt2410.c | 8 +- arch/arm/mach-s3c2410/mach-smdk2410.c | 6 +- arch/arm/mach-s3c2410/mach-tct_hammer.c | 6 +- arch/arm/mach-s3c2410/mach-vr1000.c | 6 +- arch/arm/mach-s3c2410/pm.c | 4 +- arch/arm/mach-s3c2410/s3c2410.c | 8 +- arch/arm/mach-s3c2410/sleep.S | 2 +- arch/arm/mach-s3c2410/usb-simtec.c | 2 +- arch/arm/mach-s3c2412/clock.c | 4 +- arch/arm/mach-s3c2412/dma.c | 4 +- arch/arm/mach-s3c2412/irq.c | 6 +- arch/arm/mach-s3c2412/mach-jive.c | 8 +- arch/arm/mach-s3c2412/mach-smdk2413.c | 8 +- arch/arm/mach-s3c2412/mach-vstms.c | 8 +- arch/arm/mach-s3c2412/pm.c | 4 +- arch/arm/mach-s3c2412/s3c2412.c | 8 +- arch/arm/mach-s3c2440/clock.c | 2 +- arch/arm/mach-s3c2440/dma.c | 4 +- arch/arm/mach-s3c2440/dsc.c | 4 +- arch/arm/mach-s3c2440/irq.c | 6 +- arch/arm/mach-s3c2440/mach-anubis.c | 6 +- arch/arm/mach-s3c2440/mach-at2440evb.c | 6 +- arch/arm/mach-s3c2440/mach-nexcoder.c | 10 +- arch/arm/mach-s3c2440/mach-osiris.c | 6 +- arch/arm/mach-s3c2440/mach-rx3715.c | 8 +- arch/arm/mach-s3c2440/mach-smdk2440.c | 10 +- arch/arm/mach-s3c2440/s3c2440.c | 6 +- arch/arm/mach-s3c2442/clock.c | 2 +- arch/arm/mach-s3c2442/s3c2442.c | 4 +- arch/arm/mach-s3c2443/clock.c | 4 +- arch/arm/mach-s3c2443/dma.c | 4 +- arch/arm/mach-s3c2443/irq.c | 6 +- arch/arm/mach-s3c2443/mach-smdk2443.c | 10 +- arch/arm/mach-s3c2443/s3c2443.c | 6 +- arch/arm/plat-s3c/Makefile | 3 + arch/arm/plat-s3c/include/plat/debug-macro.S | 75 ++++++++ arch/arm/plat-s3c/include/plat/regs-serial.h | 232 +++++++++++++++++++++++ arch/arm/plat-s3c/include/plat/regs-timer.h | 115 +++++++++++ arch/arm/plat-s3c24xx/clock.c | 2 +- arch/arm/plat-s3c24xx/common-smdk.c | 4 +- arch/arm/plat-s3c24xx/cpu.c | 16 +- arch/arm/plat-s3c24xx/devs.c | 6 +- arch/arm/plat-s3c24xx/include/plat/cpu.h | 54 ++++++ arch/arm/plat-s3c24xx/include/plat/devs.h | 49 +++++ arch/arm/plat-s3c24xx/include/plat/irq.h | 109 +++++++++++ arch/arm/plat-s3c24xx/include/plat/pm.h | 73 +++++++ arch/arm/plat-s3c24xx/include/plat/s3c2400.h | 31 +++ arch/arm/plat-s3c24xx/include/plat/s3c2410.h | 31 +++ arch/arm/plat-s3c24xx/include/plat/s3c2440.h | 17 ++ arch/arm/plat-s3c24xx/include/plat/s3c2442.h | 17 ++ arch/arm/plat-s3c24xx/include/plat/s3c2443.h | 32 ++++ arch/arm/plat-s3c24xx/irq.c | 6 +- arch/arm/plat-s3c24xx/pm-simtec.c | 2 +- arch/arm/plat-s3c24xx/pm.c | 4 +- arch/arm/plat-s3c24xx/pwm-clock.c | 4 +- arch/arm/plat-s3c24xx/pwm.c | 4 +- arch/arm/plat-s3c24xx/s3c244x-clock.c | 2 +- arch/arm/plat-s3c24xx/s3c244x-irq.c | 6 +- arch/arm/plat-s3c24xx/s3c244x.c | 12 +- arch/arm/plat-s3c24xx/sleep.S | 2 +- arch/arm/plat-s3c24xx/time.c | 4 +- drivers/serial/s3c2400.c | 2 +- drivers/serial/s3c2410.c | 2 +- drivers/serial/s3c2412.c | 2 +- drivers/serial/s3c2440.c | 2 +- drivers/serial/samsung.c | 2 +- include/asm-arm/plat-s3c/debug-macro.S | 75 -------- include/asm-arm/plat-s3c/regs-serial.h | 232 ----------------------- include/asm-arm/plat-s3c/regs-timer.h | 115 ----------- include/asm-arm/plat-s3c/uncompress.h | 2 +- include/asm-arm/plat-s3c24xx/cpu.h | 54 ------ include/asm-arm/plat-s3c24xx/devs.h | 49 ----- include/asm-arm/plat-s3c24xx/irq.h | 109 ----------- include/asm-arm/plat-s3c24xx/pm.h | 73 ------- include/asm-arm/plat-s3c24xx/s3c2400.h | 31 --- include/asm-arm/plat-s3c24xx/s3c2410.h | 31 --- include/asm-arm/plat-s3c24xx/s3c2440.h | 17 -- include/asm-arm/plat-s3c24xx/s3c2442.h | 17 -- include/asm-arm/plat-s3c24xx/s3c2443.h | 32 ---- 90 files changed, 1008 insertions(+), 1005 deletions(-) create mode 100644 arch/arm/plat-s3c/Makefile create mode 100644 arch/arm/plat-s3c/include/plat/debug-macro.S create mode 100644 arch/arm/plat-s3c/include/plat/regs-serial.h create mode 100644 arch/arm/plat-s3c/include/plat/regs-timer.h create mode 100644 arch/arm/plat-s3c24xx/include/plat/cpu.h create mode 100644 arch/arm/plat-s3c24xx/include/plat/devs.h create mode 100644 arch/arm/plat-s3c24xx/include/plat/irq.h create mode 100644 arch/arm/plat-s3c24xx/include/plat/pm.h create mode 100644 arch/arm/plat-s3c24xx/include/plat/s3c2400.h create mode 100644 arch/arm/plat-s3c24xx/include/plat/s3c2410.h create mode 100644 arch/arm/plat-s3c24xx/include/plat/s3c2440.h create mode 100644 arch/arm/plat-s3c24xx/include/plat/s3c2442.h create mode 100644 arch/arm/plat-s3c24xx/include/plat/s3c2443.h delete mode 100644 include/asm-arm/plat-s3c/debug-macro.S delete mode 100644 include/asm-arm/plat-s3c/regs-serial.h delete mode 100644 include/asm-arm/plat-s3c/regs-timer.h delete mode 100644 include/asm-arm/plat-s3c24xx/cpu.h delete mode 100644 include/asm-arm/plat-s3c24xx/devs.h delete mode 100644 include/asm-arm/plat-s3c24xx/irq.h delete mode 100644 include/asm-arm/plat-s3c24xx/pm.h delete mode 100644 include/asm-arm/plat-s3c24xx/s3c2400.h delete mode 100644 include/asm-arm/plat-s3c24xx/s3c2410.h delete mode 100644 include/asm-arm/plat-s3c24xx/s3c2440.h delete mode 100644 include/asm-arm/plat-s3c24xx/s3c2442.h delete mode 100644 include/asm-arm/plat-s3c24xx/s3c2443.h diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 703a44fa0f9b..0e97f5cc5417 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -120,7 +120,7 @@ endif machine-$(CONFIG_ARCH_OMAP2) := omap2 plat-$(CONFIG_ARCH_OMAP) := omap machine-$(CONFIG_ARCH_S3C2410) := s3c2410 s3c2400 s3c2412 s3c2440 s3c2442 s3c2443 - plat-$(CONFIG_PLAT_S3C24XX) := s3c24xx + plat-$(CONFIG_PLAT_S3C24XX) := s3c24xx s3c machine-$(CONFIG_ARCH_LH7A40X) := lh7a40x machine-$(CONFIG_ARCH_VERSATILE) := versatile machine-$(CONFIG_ARCH_IMX) := imx diff --git a/arch/arm/mach-s3c2410/bast-irq.c b/arch/arm/mach-s3c2410/bast-irq.c index c66021b5fa4d..cfa8da5f4e16 100644 --- a/arch/arm/mach-s3c2410/bast-irq.c +++ b/arch/arm/mach-s3c2410/bast-irq.c @@ -38,7 +38,7 @@ #include #include -#include +#include #if 0 #include diff --git a/arch/arm/mach-s3c2410/clock.c b/arch/arm/mach-s3c2410/clock.c index 1322851d1acb..f0172d2c33bb 100644 --- a/arch/arm/mach-s3c2410/clock.c +++ b/arch/arm/mach-s3c2410/clock.c @@ -37,13 +37,13 @@ #include #include -#include +#include #include #include -#include +#include #include -#include +#include int s3c2410_clkcon_enable(struct clk *clk, int enable) { diff --git a/arch/arm/mach-s3c2410/dma.c b/arch/arm/mach-s3c2410/dma.c index 8730797749e3..99b6d68b754c 100644 --- a/arch/arm/mach-s3c2410/dma.c +++ b/arch/arm/mach-s3c2410/dma.c @@ -20,10 +20,10 @@ #include #include -#include +#include #include -#include +#include #include #include #include diff --git a/arch/arm/mach-s3c2410/include/mach/debug-macro.S b/arch/arm/mach-s3c2410/include/mach/debug-macro.S index 682df23087ab..4c29a89ad077 100644 --- a/arch/arm/mach-s3c2410/include/mach/debug-macro.S +++ b/arch/arm/mach-s3c2410/include/mach/debug-macro.S @@ -14,7 +14,7 @@ #include #include -#include +#include #define S3C2410_UART1_OFF (0x4000) #define SHIFT_2440TXF (14-9) @@ -99,4 +99,4 @@ /* include the reset of the code which will do the work */ -#include +#include diff --git a/arch/arm/mach-s3c2410/irq.c b/arch/arm/mach-s3c2410/irq.c index f5c5c53e1cc1..92150399563b 100644 --- a/arch/arm/mach-s3c2410/irq.c +++ b/arch/arm/mach-s3c2410/irq.c @@ -25,8 +25,8 @@ #include #include -#include -#include +#include +#include static int s3c2410_irq_add(struct sys_device *sysdev) { diff --git a/arch/arm/mach-s3c2410/mach-amlm5900.c b/arch/arm/mach-s3c2410/mach-amlm5900.c index f0de3c23ce78..c7936c15ec29 100644 --- a/arch/arm/mach-s3c2410/mach-amlm5900.c +++ b/arch/arm/mach-s3c2410/mach-amlm5900.c @@ -48,12 +48,12 @@ #include #include -#include +#include #include #include -#include -#include +#include +#include #ifdef CONFIG_MTD_PARTITIONS diff --git a/arch/arm/mach-s3c2410/mach-bast.c b/arch/arm/mach-s3c2410/mach-bast.c index 24c6334fac89..a01e3d3b0dff 100644 --- a/arch/arm/mach-s3c2410/mach-bast.c +++ b/arch/arm/mach-s3c2410/mach-bast.c @@ -39,7 +39,7 @@ #include //#include -#include +#include #include #include #include @@ -56,8 +56,8 @@ #include #include -#include -#include +#include +#include #include "usb-simtec.h" #include "nor-simtec.h" diff --git a/arch/arm/mach-s3c2410/mach-h1940.c b/arch/arm/mach-s3c2410/mach-h1940.c index e35933a46d10..f9538d1965f3 100644 --- a/arch/arm/mach-s3c2410/mach-h1940.c +++ b/arch/arm/mach-s3c2410/mach-h1940.c @@ -30,7 +30,7 @@ #include #include -#include +#include #include #include #include @@ -41,9 +41,9 @@ #include #include -#include -#include -#include +#include +#include +#include static struct map_desc h1940_iodesc[] __initdata = { [0] = { diff --git a/arch/arm/mach-s3c2410/mach-n30.c b/arch/arm/mach-s3c2410/mach-n30.c index 80fe2ed0775c..f9cc338a9c4c 100644 --- a/arch/arm/mach-s3c2410/mach-n30.c +++ b/arch/arm/mach-s3c2410/mach-n30.c @@ -41,12 +41,12 @@ #include #include -#include +#include #include -#include -#include -#include +#include +#include +#include #include static struct map_desc n30_iodesc[] __initdata = { diff --git a/arch/arm/mach-s3c2410/mach-otom.c b/arch/arm/mach-s3c2410/mach-otom.c index 606ee15911b6..d49dbb0a4c8d 100644 --- a/arch/arm/mach-s3c2410/mach-otom.c +++ b/arch/arm/mach-s3c2410/mach-otom.c @@ -29,13 +29,13 @@ #include #include -#include +#include #include -#include +#include #include -#include -#include +#include +#include static struct map_desc otom11_iodesc[] __initdata = { /* Device area */ diff --git a/arch/arm/mach-s3c2410/mach-qt2410.c b/arch/arm/mach-s3c2410/mach-qt2410.c index 7d34844debde..c3277258ecaf 100644 --- a/arch/arm/mach-s3c2410/mach-qt2410.c +++ b/arch/arm/mach-s3c2410/mach-qt2410.c @@ -49,7 +49,7 @@ #include #include -#include +#include #include #include #include @@ -57,9 +57,9 @@ #include #include -#include -#include -#include +#include +#include +#include static struct map_desc qt2410_iodesc[] __initdata = { { 0xe0000000, __phys_to_pfn(S3C2410_CS3+0x01000000), SZ_1M, MT_DEVICE } diff --git a/arch/arm/mach-s3c2410/mach-smdk2410.c b/arch/arm/mach-s3c2410/mach-smdk2410.c index b88939d72282..6d940640a74f 100644 --- a/arch/arm/mach-s3c2410/mach-smdk2410.c +++ b/arch/arm/mach-s3c2410/mach-smdk2410.c @@ -46,10 +46,10 @@ #include #include -#include +#include -#include -#include +#include +#include #include diff --git a/arch/arm/mach-s3c2410/mach-tct_hammer.c b/arch/arm/mach-s3c2410/mach-tct_hammer.c index ec87306a8c24..773abd439981 100644 --- a/arch/arm/mach-s3c2410/mach-tct_hammer.c +++ b/arch/arm/mach-s3c2410/mach-tct_hammer.c @@ -44,9 +44,9 @@ #include #include -#include -#include -#include +#include +#include +#include #ifdef CONFIG_MTD_PARTITIONS diff --git a/arch/arm/mach-s3c2410/mach-vr1000.c b/arch/arm/mach-s3c2410/mach-vr1000.c index fbc0213d5485..41a2a0ee3557 100644 --- a/arch/arm/mach-s3c2410/mach-vr1000.c +++ b/arch/arm/mach-s3c2410/mach-vr1000.c @@ -40,13 +40,13 @@ #include #include -#include +#include #include #include #include -#include -#include +#include +#include #include "usb-simtec.h" #include "nor-simtec.h" diff --git a/arch/arm/mach-s3c2410/pm.c b/arch/arm/mach-s3c2410/pm.c index ba43ff9e8164..b026cc8dcbae 100644 --- a/arch/arm/mach-s3c2410/pm.c +++ b/arch/arm/mach-s3c2410/pm.c @@ -34,8 +34,8 @@ #include #include -#include -#include +#include +#include #ifdef CONFIG_S3C2410_PM_DEBUG extern void pm_dbg(const char *fmt, ...); diff --git a/arch/arm/mach-s3c2410/s3c2410.c b/arch/arm/mach-s3c2410/s3c2410.c index 5d977f9c88ac..97173d360594 100644 --- a/arch/arm/mach-s3c2410/s3c2410.c +++ b/arch/arm/mach-s3c2410/s3c2410.c @@ -29,11 +29,11 @@ #include #include -#include +#include -#include -#include -#include +#include +#include +#include #include /* Initial IO mappings */ diff --git a/arch/arm/mach-s3c2410/sleep.S b/arch/arm/mach-s3c2410/sleep.S index be37f221a177..dd5b6388a5a5 100644 --- a/arch/arm/mach-s3c2410/sleep.S +++ b/arch/arm/mach-s3c2410/sleep.S @@ -32,7 +32,7 @@ #include #include #include -#include +#include /* s3c2410_cpu_suspend * diff --git a/arch/arm/mach-s3c2410/usb-simtec.c b/arch/arm/mach-s3c2410/usb-simtec.c index 4dacf8a1750d..a8a2c28722b9 100644 --- a/arch/arm/mach-s3c2410/usb-simtec.c +++ b/arch/arm/mach-s3c2410/usb-simtec.c @@ -35,7 +35,7 @@ #include #include -#include +#include #include "usb-simtec.h" /* control power and monitor over-current events on various Simtec diff --git a/arch/arm/mach-s3c2412/clock.c b/arch/arm/mach-s3c2412/clock.c index af4b2ce516f9..8b3382d24799 100644 --- a/arch/arm/mach-s3c2412/clock.c +++ b/arch/arm/mach-s3c2412/clock.c @@ -37,13 +37,13 @@ #include #include -#include +#include #include #include #include #include -#include +#include /* We currently have to assume that the system is running * from the XTPll input, and that all ***REFCLKs are being diff --git a/arch/arm/mach-s3c2412/dma.c b/arch/arm/mach-s3c2412/dma.c index 22fc04a3b533..d4af572f22fd 100644 --- a/arch/arm/mach-s3c2412/dma.c +++ b/arch/arm/mach-s3c2412/dma.c @@ -22,9 +22,9 @@ #include #include -#include +#include -#include +#include #include #include #include diff --git a/arch/arm/mach-s3c2412/irq.c b/arch/arm/mach-s3c2412/irq.c index ac62b79044f4..936fac7600e3 100644 --- a/arch/arm/mach-s3c2412/irq.c +++ b/arch/arm/mach-s3c2412/irq.c @@ -35,9 +35,9 @@ #include #include -#include -#include -#include +#include +#include +#include #define INTMSK(start, end) ((1 << ((end) + 1 - (start))) - 1) #define INTMSK_SUB(start, end) (INTMSK(start, end) << ((start - S3C2410_IRQSUB(0)))) diff --git a/arch/arm/mach-s3c2412/mach-jive.c b/arch/arm/mach-s3c2412/mach-jive.c index ad980a1690c2..246c6dbcd87c 100644 --- a/arch/arm/mach-s3c2412/mach-jive.c +++ b/arch/arm/mach-s3c2412/mach-jive.c @@ -30,7 +30,7 @@ #include #include -#include +#include #include #include @@ -49,9 +49,9 @@ #include #include -#include -#include -#include +#include +#include +#include #include static struct map_desc jive_iodesc[] __initdata = { diff --git a/arch/arm/mach-s3c2412/mach-smdk2413.c b/arch/arm/mach-s3c2412/mach-smdk2413.c index 80affb1ee4cd..ae8dea1dbd83 100644 --- a/arch/arm/mach-s3c2412/mach-smdk2413.c +++ b/arch/arm/mach-s3c2412/mach-smdk2413.c @@ -32,7 +32,7 @@ #include //#include -#include +#include #include #include @@ -40,11 +40,11 @@ #include #include -#include +#include #include #include -#include -#include +#include +#include #include diff --git a/arch/arm/mach-s3c2412/mach-vstms.c b/arch/arm/mach-s3c2412/mach-vstms.c index 7a08b3789915..4e84d404bf26 100644 --- a/arch/arm/mach-s3c2412/mach-vstms.c +++ b/arch/arm/mach-s3c2412/mach-vstms.c @@ -33,7 +33,7 @@ #include #include -#include +#include #include #include @@ -42,11 +42,11 @@ #include -#include +#include #include #include -#include -#include +#include +#include static struct map_desc vstms_iodesc[] __initdata = { diff --git a/arch/arm/mach-s3c2412/pm.c b/arch/arm/mach-s3c2412/pm.c index 737523a4e037..3e5575f66863 100644 --- a/arch/arm/mach-s3c2412/pm.c +++ b/arch/arm/mach-s3c2412/pm.c @@ -28,8 +28,8 @@ #include #include -#include -#include +#include +#include #include diff --git a/arch/arm/mach-s3c2412/s3c2412.c b/arch/arm/mach-s3c2412/s3c2412.c index d278010b9f60..4262de06f920 100644 --- a/arch/arm/mach-s3c2412/s3c2412.c +++ b/arch/arm/mach-s3c2412/s3c2412.c @@ -34,7 +34,7 @@ #include #include -#include +#include #include #include #include @@ -43,10 +43,10 @@ #include #include -#include -#include +#include +#include #include -#include +#include #ifndef CONFIG_CPU_S3C2412_ONLY void __iomem *s3c24xx_va_gpio2 = S3C24XX_VA_GPIO; diff --git a/arch/arm/mach-s3c2440/clock.c b/arch/arm/mach-s3c2440/clock.c index 95567e6daea1..bb1101f6a896 100644 --- a/arch/arm/mach-s3c2440/clock.c +++ b/arch/arm/mach-s3c2440/clock.c @@ -42,7 +42,7 @@ #include #include -#include +#include /* S3C2440 extended clock support */ diff --git a/arch/arm/mach-s3c2440/dma.c b/arch/arm/mach-s3c2440/dma.c index cdd4e6e79ac0..b674f869e57c 100644 --- a/arch/arm/mach-s3c2440/dma.c +++ b/arch/arm/mach-s3c2440/dma.c @@ -21,9 +21,9 @@ #include #include -#include +#include -#include +#include #include #include #include diff --git a/arch/arm/mach-s3c2440/dsc.c b/arch/arm/mach-s3c2440/dsc.c index c0c67438d0a4..a0d49a982096 100644 --- a/arch/arm/mach-s3c2440/dsc.c +++ b/arch/arm/mach-s3c2440/dsc.c @@ -27,8 +27,8 @@ #include #include -#include -#include +#include +#include int s3c2440_set_dsc(unsigned int pin, unsigned int value) { diff --git a/arch/arm/mach-s3c2440/irq.c b/arch/arm/mach-s3c2440/irq.c index 276b823f4e27..a23cffbfcce8 100644 --- a/arch/arm/mach-s3c2440/irq.c +++ b/arch/arm/mach-s3c2440/irq.c @@ -34,9 +34,9 @@ #include #include -#include -#include -#include +#include +#include +#include /* WDT/AC97 */ diff --git a/arch/arm/mach-s3c2440/mach-anubis.c b/arch/arm/mach-s3c2440/mach-anubis.c index 441f4bc09472..a37f8b220572 100644 --- a/arch/arm/mach-s3c2440/mach-anubis.c +++ b/arch/arm/mach-s3c2440/mach-anubis.c @@ -36,7 +36,7 @@ #include #include -#include +#include #include #include #include @@ -50,8 +50,8 @@ #include #include -#include -#include +#include +#include #define COPYRIGHT ", (c) 2005 Simtec Electronics" diff --git a/arch/arm/mach-s3c2440/mach-at2440evb.c b/arch/arm/mach-s3c2440/mach-at2440evb.c index f0f0cc6afcf4..5114b87d8cfd 100644 --- a/arch/arm/mach-s3c2440/mach-at2440evb.c +++ b/arch/arm/mach-s3c2440/mach-at2440evb.c @@ -31,7 +31,7 @@ #include #include -#include +#include #include #include #include @@ -43,8 +43,8 @@ #include #include -#include -#include +#include +#include static struct map_desc at2440evb_iodesc[] __initdata = { /* Nothing here */ diff --git a/arch/arm/mach-s3c2440/mach-nexcoder.c b/arch/arm/mach-s3c2440/mach-nexcoder.c index 1a5e7027b41b..9d8259589856 100644 --- a/arch/arm/mach-s3c2440/mach-nexcoder.c +++ b/arch/arm/mach-s3c2440/mach-nexcoder.c @@ -36,13 +36,13 @@ //#include #include -#include +#include -#include -#include +#include +#include #include -#include -#include +#include +#include static struct map_desc nexcoder_iodesc[] __initdata = { /* nothing here yet */ diff --git a/arch/arm/mach-s3c2440/mach-osiris.c b/arch/arm/mach-s3c2440/mach-osiris.c index 8b83f93b6102..5b1c32e64f0b 100644 --- a/arch/arm/mach-s3c2440/mach-osiris.c +++ b/arch/arm/mach-s3c2440/mach-osiris.c @@ -33,7 +33,7 @@ #include #include -#include +#include #include #include #include @@ -45,8 +45,8 @@ #include #include -#include -#include +#include +#include /* onboard perihperal map */ diff --git a/arch/arm/mach-s3c2440/mach-rx3715.c b/arch/arm/mach-s3c2440/mach-rx3715.c index e0b07e6a0a18..46128a170fed 100644 --- a/arch/arm/mach-s3c2440/mach-rx3715.c +++ b/arch/arm/mach-s3c2440/mach-rx3715.c @@ -38,7 +38,7 @@ #include #include -#include +#include #include #include @@ -47,9 +47,9 @@ #include #include -#include -#include -#include +#include +#include +#include static struct map_desc rx3715_iodesc[] __initdata = { /* dump ISA space somewhere unused */ diff --git a/arch/arm/mach-s3c2440/mach-smdk2440.c b/arch/arm/mach-s3c2440/mach-smdk2440.c index 327c8f371984..e1799abec87d 100644 --- a/arch/arm/mach-s3c2440/mach-smdk2440.c +++ b/arch/arm/mach-s3c2440/mach-smdk2440.c @@ -31,18 +31,18 @@ #include #include -#include +#include #include #include #include #include -#include -#include +#include +#include #include -#include -#include +#include +#include #include diff --git a/arch/arm/mach-s3c2440/s3c2440.c b/arch/arm/mach-s3c2440/s3c2440.c index d6b9a92d284e..52e527eebee4 100644 --- a/arch/arm/mach-s3c2440/s3c2440.c +++ b/arch/arm/mach-s3c2440/s3c2440.c @@ -29,9 +29,9 @@ #include #include -#include -#include -#include +#include +#include +#include static struct sys_device s3c2440_sysdev = { .cls = &s3c2440_sysclass, diff --git a/arch/arm/mach-s3c2442/clock.c b/arch/arm/mach-s3c2442/clock.c index 569b5c3d334a..075db289b7f3 100644 --- a/arch/arm/mach-s3c2442/clock.c +++ b/arch/arm/mach-s3c2442/clock.c @@ -42,7 +42,7 @@ #include #include -#include +#include /* S3C2442 extended clock support */ diff --git a/arch/arm/mach-s3c2442/s3c2442.c b/arch/arm/mach-s3c2442/s3c2442.c index fbf8264249da..4663bdc7fff6 100644 --- a/arch/arm/mach-s3c2442/s3c2442.c +++ b/arch/arm/mach-s3c2442/s3c2442.c @@ -19,8 +19,8 @@ #include #include -#include -#include +#include +#include static struct sys_device s3c2442_sysdev = { .cls = &s3c2442_sysclass, diff --git a/arch/arm/mach-s3c2443/clock.c b/arch/arm/mach-s3c2443/clock.c index 6a8d7cced4a2..ce56b51170f7 100644 --- a/arch/arm/mach-s3c2443/clock.c +++ b/arch/arm/mach-s3c2443/clock.c @@ -39,9 +39,9 @@ #include -#include +#include #include -#include +#include /* We currently have to assume that the system is running * from the XTPll input, and that all ***REFCLKs are being diff --git a/arch/arm/mach-s3c2443/dma.c b/arch/arm/mach-s3c2443/dma.c index c1ff03aebfda..e75b6e3cfc34 100644 --- a/arch/arm/mach-s3c2443/dma.c +++ b/arch/arm/mach-s3c2443/dma.c @@ -22,9 +22,9 @@ #include #include -#include +#include -#include +#include #include #include #include diff --git a/arch/arm/mach-s3c2443/irq.c b/arch/arm/mach-s3c2443/irq.c index 9674de7223fd..0e00809c1e6e 100644 --- a/arch/arm/mach-s3c2443/irq.c +++ b/arch/arm/mach-s3c2443/irq.c @@ -34,9 +34,9 @@ #include #include -#include -#include -#include +#include +#include +#include #define INTMSK(start, end) ((1 << ((end) + 1 - (start))) - 1) diff --git a/arch/arm/mach-s3c2443/mach-smdk2443.c b/arch/arm/mach-s3c2443/mach-smdk2443.c index e3c0d587bd10..b1d5637d6dc1 100644 --- a/arch/arm/mach-s3c2443/mach-smdk2443.c +++ b/arch/arm/mach-s3c2443/mach-smdk2443.c @@ -31,18 +31,18 @@ #include #include -#include +#include #include #include #include #include -#include -#include +#include +#include #include -#include -#include +#include +#include #include diff --git a/arch/arm/mach-s3c2443/s3c2443.c b/arch/arm/mach-s3c2443/s3c2443.c index 37793f924b5e..f1d1f8e158c2 100644 --- a/arch/arm/mach-s3c2443/s3c2443.c +++ b/arch/arm/mach-s3c2443/s3c2443.c @@ -32,9 +32,9 @@ #include #include -#include -#include -#include +#include +#include +#include static struct map_desc s3c2443_iodesc[] __initdata = { IODESC_ENT(WATCHDOG), diff --git a/arch/arm/plat-s3c/Makefile b/arch/arm/plat-s3c/Makefile new file mode 100644 index 000000000000..f03d7b35ba37 --- /dev/null +++ b/arch/arm/plat-s3c/Makefile @@ -0,0 +1,3 @@ +# dummy makefile, currently just including asm/arm/plat-s3c/include/plat + +obj-n := dummy.o diff --git a/arch/arm/plat-s3c/include/plat/debug-macro.S b/arch/arm/plat-s3c/include/plat/debug-macro.S new file mode 100644 index 000000000000..4aa7e2e6c001 --- /dev/null +++ b/arch/arm/plat-s3c/include/plat/debug-macro.S @@ -0,0 +1,75 @@ +/* linux/include/asm-arm/plat-s3c/debug-macro.S + * + * Copyright 2005, 2007 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * Ben Dooks + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include + +/* The S3C2440 implementations are used by default as they are the + * most widely re-used */ + + .macro fifo_level_s3c2440 rd, rx + ldr \rd, [ \rx, # S3C2410_UFSTAT ] + and \rd, \rd, #S3C2440_UFSTAT_TXMASK + .endm + +#ifndef fifo_level +#define fifo_level fifo_level_s3c2410 +#endif + + .macro fifo_full_s3c2440 rd, rx + ldr \rd, [ \rx, # S3C2410_UFSTAT ] + tst \rd, #S3C2440_UFSTAT_TXFULL + .endm + +#ifndef fifo_full +#define fifo_full fifo_full_s3c2440 +#endif + + .macro senduart,rd,rx + strb \rd, [\rx, # S3C2410_UTXH ] + .endm + + .macro busyuart, rd, rx + ldr \rd, [ \rx, # S3C2410_UFCON ] + tst \rd, #S3C2410_UFCON_FIFOMODE @ fifo enabled? + beq 1001f @ + @ FIFO enabled... +1003: + fifo_full \rd, \rx + bne 1003b + b 1002f + +1001: + @ busy waiting for non fifo + ldr \rd, [ \rx, # S3C2410_UTRSTAT ] + tst \rd, #S3C2410_UTRSTAT_TXFE + beq 1001b + +1002: @ exit busyuart + .endm + + .macro waituart,rd,rx + ldr \rd, [ \rx, # S3C2410_UFCON ] + tst \rd, #S3C2410_UFCON_FIFOMODE @ fifo enabled? + beq 1001f @ + @ FIFO enabled... +1003: + fifo_level \rd, \rx + teq \rd, #0 + bne 1003b + b 1002f +1001: + @ idle waiting for non fifo + ldr \rd, [ \rx, # S3C2410_UTRSTAT ] + tst \rd, #S3C2410_UTRSTAT_TXFE + beq 1001b + +1002: @ exit busyuart + .endm diff --git a/arch/arm/plat-s3c/include/plat/regs-serial.h b/arch/arm/plat-s3c/include/plat/regs-serial.h new file mode 100644 index 000000000000..a0daa647b92c --- /dev/null +++ b/arch/arm/plat-s3c/include/plat/regs-serial.h @@ -0,0 +1,232 @@ +/* arch/arm/mach-s3c2410/include/mach/regs-serial.h + * + * From linux/include/asm-arm/hardware/serial_s3c2410.h + * + * Internal header file for Samsung S3C2410 serial ports (UART0-2) + * + * Copyright (C) 2002 Shane Nay (shane@minirl.com) + * + * Additional defines, (c) 2003 Simtec Electronics (linux@simtec.co.uk) + * + * Adapted from: + * + * Internal header file for MX1ADS serial ports (UART1 & 2) + * + * Copyright (C) 2002 Shane Nay (shane@minirl.com) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +*/ + +#ifndef __ASM_ARM_REGS_SERIAL_H +#define __ASM_ARM_REGS_SERIAL_H + +#define S3C24XX_VA_UART0 (S3C_VA_UART) +#define S3C24XX_VA_UART1 (S3C_VA_UART + 0x4000 ) +#define S3C24XX_VA_UART2 (S3C_VA_UART + 0x8000 ) +#define S3C24XX_VA_UART3 (S3C_VA_UART + 0xC000 ) + +#define S3C2410_PA_UART0 (S3C24XX_PA_UART) +#define S3C2410_PA_UART1 (S3C24XX_PA_UART + 0x4000 ) +#define S3C2410_PA_UART2 (S3C24XX_PA_UART + 0x8000 ) +#define S3C2443_PA_UART3 (S3C24XX_PA_UART + 0xC000 ) + +#define S3C2410_URXH (0x24) +#define S3C2410_UTXH (0x20) +#define S3C2410_ULCON (0x00) +#define S3C2410_UCON (0x04) +#define S3C2410_UFCON (0x08) +#define S3C2410_UMCON (0x0C) +#define S3C2410_UBRDIV (0x28) +#define S3C2410_UTRSTAT (0x10) +#define S3C2410_UERSTAT (0x14) +#define S3C2410_UFSTAT (0x18) +#define S3C2410_UMSTAT (0x1C) + +#define S3C2410_LCON_CFGMASK ((0xF<<3)|(0x3)) + +#define S3C2410_LCON_CS5 (0x0) +#define S3C2410_LCON_CS6 (0x1) +#define S3C2410_LCON_CS7 (0x2) +#define S3C2410_LCON_CS8 (0x3) +#define S3C2410_LCON_CSMASK (0x3) + +#define S3C2410_LCON_PNONE (0x0) +#define S3C2410_LCON_PEVEN (0x5 << 3) +#define S3C2410_LCON_PODD (0x4 << 3) +#define S3C2410_LCON_PMASK (0x7 << 3) + +#define S3C2410_LCON_STOPB (1<<2) +#define S3C2410_LCON_IRM (1<<6) + +#define S3C2440_UCON_CLKMASK (3<<10) +#define S3C2440_UCON_PCLK (0<<10) +#define S3C2440_UCON_UCLK (1<<10) +#define S3C2440_UCON_PCLK2 (2<<10) +#define S3C2440_UCON_FCLK (3<<10) +#define S3C2443_UCON_EPLL (3<<10) + +#define S3C2440_UCON2_FCLK_EN (1<<15) +#define S3C2440_UCON0_DIVMASK (15 << 12) +#define S3C2440_UCON1_DIVMASK (15 << 12) +#define S3C2440_UCON2_DIVMASK (7 << 12) +#define S3C2440_UCON_DIVSHIFT (12) + +#define S3C2412_UCON_CLKMASK (3<<10) +#define S3C2412_UCON_UCLK (1<<10) +#define S3C2412_UCON_USYSCLK (3<<10) +#define S3C2412_UCON_PCLK (0<<10) +#define S3C2412_UCON_PCLK2 (2<<10) + +#define S3C2410_UCON_UCLK (1<<10) +#define S3C2410_UCON_SBREAK (1<<4) + +#define S3C2410_UCON_TXILEVEL (1<<9) +#define S3C2410_UCON_RXILEVEL (1<<8) +#define S3C2410_UCON_TXIRQMODE (1<<2) +#define S3C2410_UCON_RXIRQMODE (1<<0) +#define S3C2410_UCON_RXFIFO_TOI (1<<7) +#define S3C2443_UCON_RXERR_IRQEN (1<<6) +#define S3C2443_UCON_LOOPBACK (1<<5) + +#define S3C2410_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \ + S3C2410_UCON_RXILEVEL | \ + S3C2410_UCON_TXIRQMODE | \ + S3C2410_UCON_RXIRQMODE | \ + S3C2410_UCON_RXFIFO_TOI) + +#define S3C2410_UFCON_FIFOMODE (1<<0) +#define S3C2410_UFCON_TXTRIG0 (0<<6) +#define S3C2410_UFCON_RXTRIG8 (1<<4) +#define S3C2410_UFCON_RXTRIG12 (2<<4) + +/* S3C2440 FIFO trigger levels */ +#define S3C2440_UFCON_RXTRIG1 (0<<4) +#define S3C2440_UFCON_RXTRIG8 (1<<4) +#define S3C2440_UFCON_RXTRIG16 (2<<4) +#define S3C2440_UFCON_RXTRIG32 (3<<4) + +#define S3C2440_UFCON_TXTRIG0 (0<<6) +#define S3C2440_UFCON_TXTRIG16 (1<<6) +#define S3C2440_UFCON_TXTRIG32 (2<<6) +#define S3C2440_UFCON_TXTRIG48 (3<<6) + +#define S3C2410_UFCON_RESETBOTH (3<<1) +#define S3C2410_UFCON_RESETTX (1<<2) +#define S3C2410_UFCON_RESETRX (1<<1) + +#define S3C2410_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \ + S3C2410_UFCON_TXTRIG0 | \ + S3C2410_UFCON_RXTRIG8 ) + +#define S3C2410_UMCOM_AFC (1<<4) +#define S3C2410_UMCOM_RTS_LOW (1<<0) + +#define S3C2412_UMCON_AFC_63 (0<<5) /* same as s3c2443 */ +#define S3C2412_UMCON_AFC_56 (1<<5) +#define S3C2412_UMCON_AFC_48 (2<<5) +#define S3C2412_UMCON_AFC_40 (3<<5) +#define S3C2412_UMCON_AFC_32 (4<<5) +#define S3C2412_UMCON_AFC_24 (5<<5) +#define S3C2412_UMCON_AFC_16 (6<<5) +#define S3C2412_UMCON_AFC_8 (7<<5) + +#define S3C2410_UFSTAT_TXFULL (1<<9) +#define S3C2410_UFSTAT_RXFULL (1<<8) +#define S3C2410_UFSTAT_TXMASK (15<<4) +#define S3C2410_UFSTAT_TXSHIFT (4) +#define S3C2410_UFSTAT_RXMASK (15<<0) +#define S3C2410_UFSTAT_RXSHIFT (0) + +/* UFSTAT S3C2443 same as S3C2440 */ +#define S3C2440_UFSTAT_TXFULL (1<<14) +#define S3C2440_UFSTAT_RXFULL (1<<6) +#define S3C2440_UFSTAT_TXSHIFT (8) +#define S3C2440_UFSTAT_RXSHIFT (0) +#define S3C2440_UFSTAT_TXMASK (63<<8) +#define S3C2440_UFSTAT_RXMASK (63) + +#define S3C2410_UTRSTAT_TXE (1<<2) +#define S3C2410_UTRSTAT_TXFE (1<<1) +#define S3C2410_UTRSTAT_RXDR (1<<0) + +#define S3C2410_UERSTAT_OVERRUN (1<<0) +#define S3C2410_UERSTAT_FRAME (1<<2) +#define S3C2410_UERSTAT_BREAK (1<<3) +#define S3C2443_UERSTAT_PARITY (1<<1) + +#define S3C2410_UERSTAT_ANY (S3C2410_UERSTAT_OVERRUN | \ + S3C2410_UERSTAT_FRAME | \ + S3C2410_UERSTAT_BREAK) + +#define S3C2410_UMSTAT_CTS (1<<0) +#define S3C2410_UMSTAT_DeltaCTS (1<<2) + +#define S3C2443_DIVSLOT (0x2C) + +#ifndef __ASSEMBLY__ + +/* struct s3c24xx_uart_clksrc + * + * this structure defines a named clock source that can be used for the + * uart, so that the best clock can be selected for the requested baud + * rate. + * + * min_baud and max_baud define the range of baud-rates this clock is + * acceptable for, if they are both zero, it is assumed any baud rate that + * can be generated from this clock will be used. + * + * divisor gives the divisor from the clock to the one seen by the uart +*/ + +struct s3c24xx_uart_clksrc { + const char *name; + unsigned int divisor; + unsigned int min_baud; + unsigned int max_baud; +}; + +/* configuration structure for per-machine configurations for the + * serial port + * + * the pointer is setup by the machine specific initialisation from the + * arch/arm/mach-s3c2410/ directory. +*/ + +struct s3c2410_uartcfg { + unsigned char hwport; /* hardware port number */ + unsigned char unused; + unsigned short flags; + upf_t uart_flags; /* default uart flags */ + + unsigned long ucon; /* value of ucon for port */ + unsigned long ulcon; /* value of ulcon for port */ + unsigned long ufcon; /* value of ufcon for port */ + + struct s3c24xx_uart_clksrc *clocks; + unsigned int clocks_size; +}; + +/* s3c24xx_uart_devs + * + * this is exported from the core as we cannot use driver_register(), + * or platform_add_device() before the console_initcall() +*/ + +extern struct platform_device *s3c24xx_uart_devs[3]; + +#endif /* __ASSEMBLY__ */ + +#endif /* __ASM_ARM_REGS_SERIAL_H */ + diff --git a/arch/arm/plat-s3c/include/plat/regs-timer.h b/arch/arm/plat-s3c/include/plat/regs-timer.h new file mode 100644 index 000000000000..cc0eedd53e38 --- /dev/null +++ b/arch/arm/plat-s3c/include/plat/regs-timer.h @@ -0,0 +1,115 @@ +/* arch/arm/mach-s3c2410/include/mach/regs-timer.h + * + * Copyright (c) 2003 Simtec Electronics + * http://www.simtec.co.uk/products/SWLINUX/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * S3C2410 Timer configuration +*/ + + +#ifndef __ASM_ARCH_REGS_TIMER_H +#define __ASM_ARCH_REGS_TIMER_H + +#define S3C_TIMERREG(x) (S3C_VA_TIMER + (x)) +#define S3C_TIMERREG2(tmr,reg) S3C_TIMERREG((reg)+0x0c+((tmr)*0x0c)) + +#define S3C2410_TCFG0 S3C_TIMERREG(0x00) +#define S3C2410_TCFG1 S3C_TIMERREG(0x04) +#define S3C2410_TCON S3C_TIMERREG(0x08) + +#define S3C2410_TCFG_PRESCALER0_MASK (255<<0) +#define S3C2410_TCFG_PRESCALER1_MASK (255<<8) +#define S3C2410_TCFG_PRESCALER1_SHIFT (8) +#define S3C2410_TCFG_DEADZONE_MASK (255<<16) +#define S3C2410_TCFG_DEADZONE_SHIFT (16) + +#define S3C2410_TCFG1_MUX4_DIV2 (0<<16) +#define S3C2410_TCFG1_MUX4_DIV4 (1<<16) +#define S3C2410_TCFG1_MUX4_DIV8 (2<<16) +#define S3C2410_TCFG1_MUX4_DIV16 (3<<16) +#define S3C2410_TCFG1_MUX4_TCLK1 (4<<16) +#define S3C2410_TCFG1_MUX4_MASK (15<<16) +#define S3C2410_TCFG1_MUX4_SHIFT (16) + +#define S3C2410_TCFG1_MUX3_DIV2 (0<<12) +#define S3C2410_TCFG1_MUX3_DIV4 (1<<12) +#define S3C2410_TCFG1_MUX3_DIV8 (2<<12) +#define S3C2410_TCFG1_MUX3_DIV16 (3<<12) +#define S3C2410_TCFG1_MUX3_TCLK1 (4<<12) +#define S3C2410_TCFG1_MUX3_MASK (15<<12) + + +#define S3C2410_TCFG1_MUX2_DIV2 (0<<8) +#define S3C2410_TCFG1_MUX2_DIV4 (1<<8) +#define S3C2410_TCFG1_MUX2_DIV8 (2<<8) +#define S3C2410_TCFG1_MUX2_DIV16 (3<<8) +#define S3C2410_TCFG1_MUX2_TCLK1 (4<<8) +#define S3C2410_TCFG1_MUX2_MASK (15<<8) + + +#define S3C2410_TCFG1_MUX1_DIV2 (0<<4) +#define S3C2410_TCFG1_MUX1_DIV4 (1<<4) +#define S3C2410_TCFG1_MUX1_DIV8 (2<<4) +#define S3C2410_TCFG1_MUX1_DIV16 (3<<4) +#define S3C2410_TCFG1_MUX1_TCLK0 (4<<4) +#define S3C2410_TCFG1_MUX1_MASK (15<<4) + +#define S3C2410_TCFG1_MUX0_DIV2 (0<<0) +#define S3C2410_TCFG1_MUX0_DIV4 (1<<0) +#define S3C2410_TCFG1_MUX0_DIV8 (2<<0) +#define S3C2410_TCFG1_MUX0_DIV16 (3<<0) +#define S3C2410_TCFG1_MUX0_TCLK0 (4<<0) +#define S3C2410_TCFG1_MUX0_MASK (15<<0) + +#define S3C2410_TCFG1_MUX_DIV2 (0<<0) +#define S3C2410_TCFG1_MUX_DIV4 (1<<0) +#define S3C2410_TCFG1_MUX_DIV8 (2<<0) +#define S3C2410_TCFG1_MUX_DIV16 (3<<0) +#define S3C2410_TCFG1_MUX_TCLK (4<<0) +#define S3C2410_TCFG1_MUX_MASK (15<<0) + +#define S3C2410_TCFG1_SHIFT(x) ((x) * 4) + +/* for each timer, we have an count buffer, an compare buffer and + * an observation buffer +*/ + +/* WARNING - timer 4 has no buffer reg, and it's observation is at +4 */ + +#define S3C2410_TCNTB(tmr) S3C_TIMERREG2(tmr, 0x00) +#define S3C2410_TCMPB(tmr) S3C_TIMERREG2(tmr, 0x04) +#define S3C2410_TCNTO(tmr) S3C_TIMERREG2(tmr, (((tmr) == 4) ? 0x04 : 0x08)) + +#define S3C2410_TCON_T4RELOAD (1<<22) +#define S3C2410_TCON_T4MANUALUPD (1<<21) +#define S3C2410_TCON_T4START (1<<20) + +#define S3C2410_TCON_T3RELOAD (1<<19) +#define S3C2410_TCON_T3INVERT (1<<18) +#define S3C2410_TCON_T3MANUALUPD (1<<17) +#define S3C2410_TCON_T3START (1<<16) + +#define S3C2410_TCON_T2RELOAD (1<<15) +#define S3C2410_TCON_T2INVERT (1<<14) +#define S3C2410_TCON_T2MANUALUPD (1<<13) +#define S3C2410_TCON_T2START (1<<12) + +#define S3C2410_TCON_T1RELOAD (1<<11) +#define S3C2410_TCON_T1INVERT (1<<10) +#define S3C2410_TCON_T1MANUALUPD (1<<9) +#define S3C2410_TCON_T1START (1<<8) + +#define S3C2410_TCON_T0DEADZONE (1<<4) +#define S3C2410_TCON_T0RELOAD (1<<3) +#define S3C2410_TCON_T0INVERT (1<<2) +#define S3C2410_TCON_T0MANUALUPD (1<<1) +#define S3C2410_TCON_T0START (1<<0) + +#endif /* __ASM_ARCH_REGS_TIMER_H */ + + + diff --git a/arch/arm/plat-s3c24xx/clock.c b/arch/arm/plat-s3c24xx/clock.c index 54d4b8e2263c..80fb82f2616d 100644 --- a/arch/arm/plat-s3c24xx/clock.c +++ b/arch/arm/plat-s3c24xx/clock.c @@ -48,7 +48,7 @@ #include #include -#include +#include /* clock information */ diff --git a/arch/arm/plat-s3c24xx/common-smdk.c b/arch/arm/plat-s3c24xx/common-smdk.c index 1863a1b1bc49..32490fa97b40 100644 --- a/arch/arm/plat-s3c24xx/common-smdk.c +++ b/arch/arm/plat-s3c24xx/common-smdk.c @@ -41,8 +41,8 @@ #include #include -#include -#include +#include +#include /* LED devices */ diff --git a/arch/arm/plat-s3c24xx/cpu.c b/arch/arm/plat-s3c24xx/cpu.c index 89ce60eabd5b..abddadd69119 100644 --- a/arch/arm/plat-s3c24xx/cpu.c +++ b/arch/arm/plat-s3c24xx/cpu.c @@ -42,18 +42,18 @@ #include #include -#include +#include -#include -#include +#include +#include #include -#include -#include +#include +#include #include #include "s3c244x.h" -#include -#include -#include +#include +#include +#include struct cpu_table { unsigned long idcode; diff --git a/arch/arm/plat-s3c24xx/devs.c b/arch/arm/plat-s3c24xx/devs.c index d6fb76578b11..8cf4b1b32b05 100644 --- a/arch/arm/plat-s3c24xx/devs.c +++ b/arch/arm/plat-s3c24xx/devs.c @@ -28,11 +28,11 @@ #include #include -#include +#include #include -#include -#include +#include +#include #include /* Serial port registrations */ diff --git a/arch/arm/plat-s3c24xx/include/plat/cpu.h b/arch/arm/plat-s3c24xx/include/plat/cpu.h new file mode 100644 index 000000000000..23e420e8bd5b --- /dev/null +++ b/arch/arm/plat-s3c24xx/include/plat/cpu.h @@ -0,0 +1,54 @@ +/* linux/include/asm-arm/plat-s3c24xx/cpu.h + * + * Copyright (c) 2004-2005 Simtec Electronics + * Ben Dooks + * + * Header file for S3C24XX CPU support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/* todo - fix when rmk changes iodescs to use `void __iomem *` */ + +#define IODESC_ENT(x) { (unsigned long)S3C24XX_VA_##x, __phys_to_pfn(S3C24XX_PA_##x), S3C24XX_SZ_##x, MT_DEVICE } + +#ifndef MHZ +#define MHZ (1000*1000) +#endif + +#define print_mhz(m) ((m) / MHZ), ((m / 1000) % 1000) + +/* forward declaration */ +struct s3c24xx_uart_resources; +struct platform_device; +struct s3c2410_uartcfg; +struct map_desc; + +/* core initialisation functions */ + +extern void s3c24xx_init_irq(void); + +extern void s3c24xx_init_io(struct map_desc *mach_desc, int size); + +extern void s3c24xx_init_uarts(struct s3c2410_uartcfg *cfg, int no); + +extern void s3c24xx_init_clocks(int xtal); + +extern void s3c24xx_init_uartdevs(char *name, + struct s3c24xx_uart_resources *res, + struct s3c2410_uartcfg *cfg, int no); + +/* timer for 2410/2440 */ + +struct sys_timer; +extern struct sys_timer s3c24xx_timer; + +/* system device classes */ + +extern struct sysdev_class s3c2410_sysclass; +extern struct sysdev_class s3c2412_sysclass; +extern struct sysdev_class s3c2440_sysclass; +extern struct sysdev_class s3c2442_sysclass; +extern struct sysdev_class s3c2443_sysclass; diff --git a/arch/arm/plat-s3c24xx/include/plat/devs.h b/arch/arm/plat-s3c24xx/include/plat/devs.h new file mode 100644 index 000000000000..badaac9d64a8 --- /dev/null +++ b/arch/arm/plat-s3c24xx/include/plat/devs.h @@ -0,0 +1,49 @@ +/* linux/include/asm-arm/plat-s3c24xx/devs.h + * + * Copyright (c) 2004 Simtec Electronics + * Ben Dooks + * + * Header file for s3c2410 standard platform devices + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ +#include + +struct s3c24xx_uart_resources { + struct resource *resources; + unsigned long nr_resources; +}; + +extern struct s3c24xx_uart_resources s3c2410_uart_resources[]; + +extern struct platform_device *s3c24xx_uart_devs[]; +extern struct platform_device *s3c24xx_uart_src[]; + +extern struct platform_device s3c_device_timer[]; + +extern struct platform_device s3c_device_usb; +extern struct platform_device s3c_device_lcd; +extern struct platform_device s3c_device_wdt; +extern struct platform_device s3c_device_i2c; +extern struct platform_device s3c_device_iis; +extern struct platform_device s3c_device_rtc; +extern struct platform_device s3c_device_adc; +extern struct platform_device s3c_device_sdi; +extern struct platform_device s3c_device_hsmmc; + +extern struct platform_device s3c_device_spi0; +extern struct platform_device s3c_device_spi1; + +extern struct platform_device s3c_device_nand; + +extern struct platform_device s3c_device_usbgadget; + +/* s3c2440 specific devices */ + +#ifdef CONFIG_CPU_S3C2440 + +extern struct platform_device s3c_device_camif; + +#endif diff --git a/arch/arm/plat-s3c24xx/include/plat/irq.h b/arch/arm/plat-s3c24xx/include/plat/irq.h new file mode 100644 index 000000000000..45746a995343 --- /dev/null +++ b/arch/arm/plat-s3c24xx/include/plat/irq.h @@ -0,0 +1,109 @@ +/* linux/include/asm-arm/plat-s3c24xx/irq.h + * + * Copyright (c) 2004-2005 Simtec Electronics + * Ben Dooks + * + * Header file for S3C24XX CPU IRQ support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#define irqdbf(x...) +#define irqdbf2(x...) + +#define EXTINT_OFF (IRQ_EINT4 - 4) + +/* these are exported for arch/arm/mach-* usage */ +extern struct irq_chip s3c_irq_level_chip; +extern struct irq_chip s3c_irq_chip; + +static inline void +s3c_irqsub_mask(unsigned int irqno, unsigned int parentbit, + int subcheck) +{ + unsigned long mask; + unsigned long submask; + + submask = __raw_readl(S3C2410_INTSUBMSK); + mask = __raw_readl(S3C2410_INTMSK); + + submask |= (1UL << (irqno - IRQ_S3CUART_RX0)); + + /* check to see if we need to mask the parent IRQ */ + + if ((submask & subcheck) == subcheck) { + __raw_writel(mask | parentbit, S3C2410_INTMSK); + } + + /* write back masks */ + __raw_writel(submask, S3C2410_INTSUBMSK); + +} + +static inline void +s3c_irqsub_unmask(unsigned int irqno, unsigned int parentbit) +{ + unsigned long mask; + unsigned long submask; + + submask = __raw_readl(S3C2410_INTSUBMSK); + mask = __raw_readl(S3C2410_INTMSK); + + submask &= ~(1UL << (irqno - IRQ_S3CUART_RX0)); + mask &= ~parentbit; + + /* write back masks */ + __raw_writel(submask, S3C2410_INTSUBMSK); + __raw_writel(mask, S3C2410_INTMSK); +} + + +static inline void +s3c_irqsub_maskack(unsigned int irqno, unsigned int parentmask, unsigned int group) +{ + unsigned int bit = 1UL << (irqno - IRQ_S3CUART_RX0); + + s3c_irqsub_mask(irqno, parentmask, group); + + __raw_writel(bit, S3C2410_SUBSRCPND); + + /* only ack parent if we've got all the irqs (seems we must + * ack, all and hope that the irq system retriggers ok when + * the interrupt goes off again) + */ + + if (1) { + __raw_writel(parentmask, S3C2410_SRCPND); + __raw_writel(parentmask, S3C2410_INTPND); + } +} + +static inline void +s3c_irqsub_ack(unsigned int irqno, unsigned int parentmask, unsigned int group) +{ + unsigned int bit = 1UL << (irqno - IRQ_S3CUART_RX0); + + __raw_writel(bit, S3C2410_SUBSRCPND); + + /* only ack parent if we've got all the irqs (seems we must + * ack, all and hope that the irq system retriggers ok when + * the interrupt goes off again) + */ + + if (1) { + __raw_writel(parentmask, S3C2410_SRCPND); + __raw_writel(parentmask, S3C2410_INTPND); + } +} + +/* exported for use in arch/arm/mach-s3c2410 */ + +#ifdef CONFIG_PM +extern int s3c_irq_wake(unsigned int irqno, unsigned int state); +#else +#define s3c_irq_wake NULL +#endif + +extern int s3c_irqext_type(unsigned int irq, unsigned int type); diff --git a/arch/arm/plat-s3c24xx/include/plat/pm.h b/arch/arm/plat-s3c24xx/include/plat/pm.h new file mode 100644 index 000000000000..cc623667e48a --- /dev/null +++ b/arch/arm/plat-s3c24xx/include/plat/pm.h @@ -0,0 +1,73 @@ +/* linux/include/asm-arm/plat-s3c24xx/pm.h + * + * Copyright (c) 2004 Simtec Electronics + * Written by Ben Dooks, + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/* s3c2410_pm_init + * + * called from board at initialisation time to setup the power + * management +*/ + +#ifdef CONFIG_PM + +extern __init int s3c2410_pm_init(void); + +#else + +static inline int s3c2410_pm_init(void) +{ + return 0; +} +#endif + +/* configuration for the IRQ mask over sleep */ +extern unsigned long s3c_irqwake_intmask; +extern unsigned long s3c_irqwake_eintmask; + +/* IRQ masks for IRQs allowed to go to sleep (see irq.c) */ +extern unsigned long s3c_irqwake_intallow; +extern unsigned long s3c_irqwake_eintallow; + +/* per-cpu sleep functions */ + +extern void (*pm_cpu_prep)(void); +extern void (*pm_cpu_sleep)(void); + +/* Flags for PM Control */ + +extern unsigned long s3c_pm_flags; + +/* from sleep.S */ + +extern int s3c2410_cpu_save(unsigned long *saveblk); +extern void s3c2410_cpu_suspend(void); +extern void s3c2410_cpu_resume(void); + +extern unsigned long s3c2410_sleep_save_phys; + +/* sleep save info */ + +struct sleep_save { + void __iomem *reg; + unsigned long val; +}; + +#define SAVE_ITEM(x) \ + { .reg = (x) } + +extern void s3c2410_pm_do_save(struct sleep_save *ptr, int count); +extern void s3c2410_pm_do_restore(struct sleep_save *ptr, int count); + +#ifdef CONFIG_PM +extern int s3c24xx_irq_suspend(struct sys_device *dev, pm_message_t state); +extern int s3c24xx_irq_resume(struct sys_device *dev); +#else +#define s3c24xx_irq_suspend NULL +#define s3c24xx_irq_resume NULL +#endif diff --git a/arch/arm/plat-s3c24xx/include/plat/s3c2400.h b/arch/arm/plat-s3c24xx/include/plat/s3c2400.h new file mode 100644 index 000000000000..3a5a16821af8 --- /dev/null +++ b/arch/arm/plat-s3c24xx/include/plat/s3c2400.h @@ -0,0 +1,31 @@ +/* linux/include/asm-arm/plat-s3c24xx/s3c2400.h + * + * Copyright (c) 2004 Simtec Electronics + * Ben Dooks + * + * Header file for S3C2400 cpu support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Modifications: + * 09-Fev-2006 LCVR First version, based on s3c2410.h +*/ + +#ifdef CONFIG_CPU_S3C2400 + +extern int s3c2400_init(void); + +extern void s3c2400_map_io(struct map_desc *mach_desc, int size); + +extern void s3c2400_init_uarts(struct s3c2410_uartcfg *cfg, int no); + +extern void s3c2400_init_clocks(int xtal); + +#else +#define s3c2400_init_clocks NULL +#define s3c2400_init_uarts NULL +#define s3c2400_map_io NULL +#define s3c2400_init NULL +#endif diff --git a/arch/arm/plat-s3c24xx/include/plat/s3c2410.h b/arch/arm/plat-s3c24xx/include/plat/s3c2410.h new file mode 100644 index 000000000000..3cd1ec677b3f --- /dev/null +++ b/arch/arm/plat-s3c24xx/include/plat/s3c2410.h @@ -0,0 +1,31 @@ +/* linux/include/asm-arm/plat-s3c24xx/s3c2410.h + * + * Copyright (c) 2004 Simtec Electronics + * Ben Dooks + * + * Header file for s3c2410 machine directory + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * +*/ + +#ifdef CONFIG_CPU_S3C2410 + +extern int s3c2410_init(void); + +extern void s3c2410_map_io(struct map_desc *mach_desc, int size); + +extern void s3c2410_init_uarts(struct s3c2410_uartcfg *cfg, int no); + +extern void s3c2410_init_clocks(int xtal); + +#else +#define s3c2410_init_clocks NULL +#define s3c2410_init_uarts NULL +#define s3c2410_map_io NULL +#define s3c2410_init NULL +#endif + +extern int s3c2410_baseclk_add(void); diff --git a/arch/arm/plat-s3c24xx/include/plat/s3c2440.h b/arch/arm/plat-s3c24xx/include/plat/s3c2440.h new file mode 100644 index 000000000000..107853bf9481 --- /dev/null +++ b/arch/arm/plat-s3c24xx/include/plat/s3c2440.h @@ -0,0 +1,17 @@ +/* linux/include/asm-arm/plat-s3c24xx/s3c2440.h + * + * Copyright (c) 2004-2005 Simtec Electronics + * Ben Dooks + * + * Header file for s3c2440 cpu support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifdef CONFIG_CPU_S3C2440 +extern int s3c2440_init(void); +#else +#define s3c2440_init NULL +#endif diff --git a/arch/arm/plat-s3c24xx/include/plat/s3c2442.h b/arch/arm/plat-s3c24xx/include/plat/s3c2442.h new file mode 100644 index 000000000000..451a23a2092a --- /dev/null +++ b/arch/arm/plat-s3c24xx/include/plat/s3c2442.h @@ -0,0 +1,17 @@ +/* linux/include/asm-arm/plat-s3c24xx/s3c2442.h + * + * Copyright (c) 2006 Simtec Electronics + * Ben Dooks + * + * Header file for s3c2442 cpu support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifdef CONFIG_CPU_S3C2442 +extern int s3c2442_init(void); +#else +#define s3c2442_init NULL +#endif diff --git a/arch/arm/plat-s3c24xx/include/plat/s3c2443.h b/arch/arm/plat-s3c24xx/include/plat/s3c2443.h new file mode 100644 index 000000000000..11d83b5c84e6 --- /dev/null +++ b/arch/arm/plat-s3c24xx/include/plat/s3c2443.h @@ -0,0 +1,32 @@ +/* linux/include/asm-arm/plat-s3c24xx/s3c2443.h + * + * Copyright (c) 2004-2005 Simtec Electronics + * Ben Dooks + * + * Header file for s3c2443 cpu support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifdef CONFIG_CPU_S3C2443 + +struct s3c2410_uartcfg; + +extern int s3c2443_init(void); + +extern void s3c2443_map_io(struct map_desc *mach_desc, int size); + +extern void s3c2443_init_uarts(struct s3c2410_uartcfg *cfg, int no); + +extern void s3c2443_init_clocks(int xtal); + +extern int s3c2443_baseclk_add(void); + +#else +#define s3c2443_init_clocks NULL +#define s3c2443_init_uarts NULL +#define s3c2443_map_io NULL +#define s3c2443_init NULL +#endif diff --git a/arch/arm/plat-s3c24xx/irq.c b/arch/arm/plat-s3c24xx/irq.c index 36cefe176835..25d532490b44 100644 --- a/arch/arm/plat-s3c24xx/irq.c +++ b/arch/arm/plat-s3c24xx/irq.c @@ -65,9 +65,9 @@ #include #include -#include -#include -#include +#include +#include +#include /* wakeup irq control */ diff --git a/arch/arm/plat-s3c24xx/pm-simtec.c b/arch/arm/plat-s3c24xx/pm-simtec.c index e6705014b2a0..ef6029710415 100644 --- a/arch/arm/plat-s3c24xx/pm-simtec.c +++ b/arch/arm/plat-s3c24xx/pm-simtec.c @@ -33,7 +33,7 @@ #include -#include +#include #define COPYRIGHT ", (c) 2005 Simtec Electronics" diff --git a/arch/arm/plat-s3c24xx/pm.c b/arch/arm/plat-s3c24xx/pm.c index fc4b731a949c..d937ff1a9ac5 100644 --- a/arch/arm/plat-s3c24xx/pm.c +++ b/arch/arm/plat-s3c24xx/pm.c @@ -40,7 +40,7 @@ #include #include -#include +#include #include #include #include @@ -48,7 +48,7 @@ #include -#include +#include /* for external use */ diff --git a/arch/arm/plat-s3c24xx/pwm-clock.c b/arch/arm/plat-s3c24xx/pwm-clock.c index 306cc9c6f9ef..245270b7d5b7 100644 --- a/arch/arm/plat-s3c24xx/pwm-clock.c +++ b/arch/arm/plat-s3c24xx/pwm-clock.c @@ -25,9 +25,9 @@ #include #include -#include +#include -#include +#include /* Each of the timers 0 through 5 go through the following * clock tree, with the inputs depending on the timers. diff --git a/arch/arm/plat-s3c24xx/pwm.c b/arch/arm/plat-s3c24xx/pwm.c index 7a92c938542a..feb770f2e84e 100644 --- a/arch/arm/plat-s3c24xx/pwm.c +++ b/arch/arm/plat-s3c24xx/pwm.c @@ -19,8 +19,8 @@ #include #include -#include -#include +#include +#include struct pwm_device { struct list_head list; diff --git a/arch/arm/plat-s3c24xx/s3c244x-clock.c b/arch/arm/plat-s3c24xx/s3c244x-clock.c index 8a5fffde6631..2a8d7ca428b5 100644 --- a/arch/arm/plat-s3c24xx/s3c244x-clock.c +++ b/arch/arm/plat-s3c24xx/s3c244x-clock.c @@ -42,7 +42,7 @@ #include #include -#include +#include static int s3c2440_setparent_armclk(struct clk *clk, struct clk *parent) { diff --git a/arch/arm/plat-s3c24xx/s3c244x-irq.c b/arch/arm/plat-s3c24xx/s3c244x-irq.c index f3dc38cf1de4..3520a093ef88 100644 --- a/arch/arm/plat-s3c24xx/s3c244x-irq.c +++ b/arch/arm/plat-s3c24xx/s3c244x-irq.c @@ -34,9 +34,9 @@ #include #include -#include -#include -#include +#include +#include +#include /* camera irq */ diff --git a/arch/arm/plat-s3c24xx/s3c244x.c b/arch/arm/plat-s3c24xx/s3c244x.c index 281b4804ed38..793e0cae2c77 100644 --- a/arch/arm/plat-s3c24xx/s3c244x.c +++ b/arch/arm/plat-s3c24xx/s3c244x.c @@ -30,18 +30,18 @@ #include #include -#include +#include #include #include #include -#include -#include +#include +#include #include "s3c244x.h" #include -#include -#include -#include +#include +#include +#include static struct map_desc s3c244x_iodesc[] __initdata = { IODESC_ENT(CLKPWR), diff --git a/arch/arm/plat-s3c24xx/sleep.S b/arch/arm/plat-s3c24xx/sleep.S index 4981a08b6ebb..76594b212802 100644 --- a/arch/arm/plat-s3c24xx/sleep.S +++ b/arch/arm/plat-s3c24xx/sleep.S @@ -32,7 +32,7 @@ #include #include #include -#include +#include /* CONFIG_DEBUG_RESUME is dangerous if your bootloader does not * reset the UART configuration, only enable if you really need this! diff --git a/arch/arm/plat-s3c24xx/time.c b/arch/arm/plat-s3c24xx/time.c index b471a21ae2e4..71c65c93dab0 100644 --- a/arch/arm/plat-s3c24xx/time.c +++ b/arch/arm/plat-s3c24xx/time.c @@ -33,12 +33,12 @@ #include #include #include -#include +#include #include #include #include -#include +#include static unsigned long timer_startval; static unsigned long timer_usec_ticks; diff --git a/drivers/serial/s3c2400.c b/drivers/serial/s3c2400.c index c8b4266ac35f..4873f2978bd2 100644 --- a/drivers/serial/s3c2400.c +++ b/drivers/serial/s3c2400.c @@ -19,7 +19,7 @@ #include -#include +#include #include #include "samsung.h" diff --git a/drivers/serial/s3c2410.c b/drivers/serial/s3c2410.c index 40a2531b5541..87c182ef71b8 100644 --- a/drivers/serial/s3c2410.c +++ b/drivers/serial/s3c2410.c @@ -21,7 +21,7 @@ #include #include -#include +#include #include #include "samsung.h" diff --git a/drivers/serial/s3c2412.c b/drivers/serial/s3c2412.c index d0170319c729..fd017b375568 100644 --- a/drivers/serial/s3c2412.c +++ b/drivers/serial/s3c2412.c @@ -21,7 +21,7 @@ #include #include -#include +#include #include #include "samsung.h" diff --git a/drivers/serial/s3c2440.c b/drivers/serial/s3c2440.c index d4a2b17b2498..317d239ab740 100644 --- a/drivers/serial/s3c2440.c +++ b/drivers/serial/s3c2440.c @@ -21,7 +21,7 @@ #include #include -#include +#include #include #include "samsung.h" diff --git a/drivers/serial/samsung.c b/drivers/serial/samsung.c index 5a88b3f9fe9b..1e219d3d0352 100644 --- a/drivers/serial/samsung.c +++ b/drivers/serial/samsung.c @@ -47,7 +47,7 @@ #include -#include +#include #include #include "samsung.h" diff --git a/include/asm-arm/plat-s3c/debug-macro.S b/include/asm-arm/plat-s3c/debug-macro.S deleted file mode 100644 index 84c40b847da8..000000000000 --- a/include/asm-arm/plat-s3c/debug-macro.S +++ /dev/null @@ -1,75 +0,0 @@ -/* linux/include/asm-arm/plat-s3c/debug-macro.S - * - * Copyright 2005, 2007 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * Ben Dooks - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include - -/* The S3C2440 implementations are used by default as they are the - * most widely re-used */ - - .macro fifo_level_s3c2440 rd, rx - ldr \rd, [ \rx, # S3C2410_UFSTAT ] - and \rd, \rd, #S3C2440_UFSTAT_TXMASK - .endm - -#ifndef fifo_level -#define fifo_level fifo_level_s3c2410 -#endif - - .macro fifo_full_s3c2440 rd, rx - ldr \rd, [ \rx, # S3C2410_UFSTAT ] - tst \rd, #S3C2440_UFSTAT_TXFULL - .endm - -#ifndef fifo_full -#define fifo_full fifo_full_s3c2440 -#endif - - .macro senduart,rd,rx - strb \rd, [\rx, # S3C2410_UTXH ] - .endm - - .macro busyuart, rd, rx - ldr \rd, [ \rx, # S3C2410_UFCON ] - tst \rd, #S3C2410_UFCON_FIFOMODE @ fifo enabled? - beq 1001f @ - @ FIFO enabled... -1003: - fifo_full \rd, \rx - bne 1003b - b 1002f - -1001: - @ busy waiting for non fifo - ldr \rd, [ \rx, # S3C2410_UTRSTAT ] - tst \rd, #S3C2410_UTRSTAT_TXFE - beq 1001b - -1002: @ exit busyuart - .endm - - .macro waituart,rd,rx - ldr \rd, [ \rx, # S3C2410_UFCON ] - tst \rd, #S3C2410_UFCON_FIFOMODE @ fifo enabled? - beq 1001f @ - @ FIFO enabled... -1003: - fifo_level \rd, \rx - teq \rd, #0 - bne 1003b - b 1002f -1001: - @ idle waiting for non fifo - ldr \rd, [ \rx, # S3C2410_UTRSTAT ] - tst \rd, #S3C2410_UTRSTAT_TXFE - beq 1001b - -1002: @ exit busyuart - .endm diff --git a/include/asm-arm/plat-s3c/regs-serial.h b/include/asm-arm/plat-s3c/regs-serial.h deleted file mode 100644 index a0daa647b92c..000000000000 --- a/include/asm-arm/plat-s3c/regs-serial.h +++ /dev/null @@ -1,232 +0,0 @@ -/* arch/arm/mach-s3c2410/include/mach/regs-serial.h - * - * From linux/include/asm-arm/hardware/serial_s3c2410.h - * - * Internal header file for Samsung S3C2410 serial ports (UART0-2) - * - * Copyright (C) 2002 Shane Nay (shane@minirl.com) - * - * Additional defines, (c) 2003 Simtec Electronics (linux@simtec.co.uk) - * - * Adapted from: - * - * Internal header file for MX1ADS serial ports (UART1 & 2) - * - * Copyright (C) 2002 Shane Nay (shane@minirl.com) - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -*/ - -#ifndef __ASM_ARM_REGS_SERIAL_H -#define __ASM_ARM_REGS_SERIAL_H - -#define S3C24XX_VA_UART0 (S3C_VA_UART) -#define S3C24XX_VA_UART1 (S3C_VA_UART + 0x4000 ) -#define S3C24XX_VA_UART2 (S3C_VA_UART + 0x8000 ) -#define S3C24XX_VA_UART3 (S3C_VA_UART + 0xC000 ) - -#define S3C2410_PA_UART0 (S3C24XX_PA_UART) -#define S3C2410_PA_UART1 (S3C24XX_PA_UART + 0x4000 ) -#define S3C2410_PA_UART2 (S3C24XX_PA_UART + 0x8000 ) -#define S3C2443_PA_UART3 (S3C24XX_PA_UART + 0xC000 ) - -#define S3C2410_URXH (0x24) -#define S3C2410_UTXH (0x20) -#define S3C2410_ULCON (0x00) -#define S3C2410_UCON (0x04) -#define S3C2410_UFCON (0x08) -#define S3C2410_UMCON (0x0C) -#define S3C2410_UBRDIV (0x28) -#define S3C2410_UTRSTAT (0x10) -#define S3C2410_UERSTAT (0x14) -#define S3C2410_UFSTAT (0x18) -#define S3C2410_UMSTAT (0x1C) - -#define S3C2410_LCON_CFGMASK ((0xF<<3)|(0x3)) - -#define S3C2410_LCON_CS5 (0x0) -#define S3C2410_LCON_CS6 (0x1) -#define S3C2410_LCON_CS7 (0x2) -#define S3C2410_LCON_CS8 (0x3) -#define S3C2410_LCON_CSMASK (0x3) - -#define S3C2410_LCON_PNONE (0x0) -#define S3C2410_LCON_PEVEN (0x5 << 3) -#define S3C2410_LCON_PODD (0x4 << 3) -#define S3C2410_LCON_PMASK (0x7 << 3) - -#define S3C2410_LCON_STOPB (1<<2) -#define S3C2410_LCON_IRM (1<<6) - -#define S3C2440_UCON_CLKMASK (3<<10) -#define S3C2440_UCON_PCLK (0<<10) -#define S3C2440_UCON_UCLK (1<<10) -#define S3C2440_UCON_PCLK2 (2<<10) -#define S3C2440_UCON_FCLK (3<<10) -#define S3C2443_UCON_EPLL (3<<10) - -#define S3C2440_UCON2_FCLK_EN (1<<15) -#define S3C2440_UCON0_DIVMASK (15 << 12) -#define S3C2440_UCON1_DIVMASK (15 << 12) -#define S3C2440_UCON2_DIVMASK (7 << 12) -#define S3C2440_UCON_DIVSHIFT (12) - -#define S3C2412_UCON_CLKMASK (3<<10) -#define S3C2412_UCON_UCLK (1<<10) -#define S3C2412_UCON_USYSCLK (3<<10) -#define S3C2412_UCON_PCLK (0<<10) -#define S3C2412_UCON_PCLK2 (2<<10) - -#define S3C2410_UCON_UCLK (1<<10) -#define S3C2410_UCON_SBREAK (1<<4) - -#define S3C2410_UCON_TXILEVEL (1<<9) -#define S3C2410_UCON_RXILEVEL (1<<8) -#define S3C2410_UCON_TXIRQMODE (1<<2) -#define S3C2410_UCON_RXIRQMODE (1<<0) -#define S3C2410_UCON_RXFIFO_TOI (1<<7) -#define S3C2443_UCON_RXERR_IRQEN (1<<6) -#define S3C2443_UCON_LOOPBACK (1<<5) - -#define S3C2410_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \ - S3C2410_UCON_RXILEVEL | \ - S3C2410_UCON_TXIRQMODE | \ - S3C2410_UCON_RXIRQMODE | \ - S3C2410_UCON_RXFIFO_TOI) - -#define S3C2410_UFCON_FIFOMODE (1<<0) -#define S3C2410_UFCON_TXTRIG0 (0<<6) -#define S3C2410_UFCON_RXTRIG8 (1<<4) -#define S3C2410_UFCON_RXTRIG12 (2<<4) - -/* S3C2440 FIFO trigger levels */ -#define S3C2440_UFCON_RXTRIG1 (0<<4) -#define S3C2440_UFCON_RXTRIG8 (1<<4) -#define S3C2440_UFCON_RXTRIG16 (2<<4) -#define S3C2440_UFCON_RXTRIG32 (3<<4) - -#define S3C2440_UFCON_TXTRIG0 (0<<6) -#define S3C2440_UFCON_TXTRIG16 (1<<6) -#define S3C2440_UFCON_TXTRIG32 (2<<6) -#define S3C2440_UFCON_TXTRIG48 (3<<6) - -#define S3C2410_UFCON_RESETBOTH (3<<1) -#define S3C2410_UFCON_RESETTX (1<<2) -#define S3C2410_UFCON_RESETRX (1<<1) - -#define S3C2410_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \ - S3C2410_UFCON_TXTRIG0 | \ - S3C2410_UFCON_RXTRIG8 ) - -#define S3C2410_UMCOM_AFC (1<<4) -#define S3C2410_UMCOM_RTS_LOW (1<<0) - -#define S3C2412_UMCON_AFC_63 (0<<5) /* same as s3c2443 */ -#define S3C2412_UMCON_AFC_56 (1<<5) -#define S3C2412_UMCON_AFC_48 (2<<5) -#define S3C2412_UMCON_AFC_40 (3<<5) -#define S3C2412_UMCON_AFC_32 (4<<5) -#define S3C2412_UMCON_AFC_24 (5<<5) -#define S3C2412_UMCON_AFC_16 (6<<5) -#define S3C2412_UMCON_AFC_8 (7<<5) - -#define S3C2410_UFSTAT_TXFULL (1<<9) -#define S3C2410_UFSTAT_RXFULL (1<<8) -#define S3C2410_UFSTAT_TXMASK (15<<4) -#define S3C2410_UFSTAT_TXSHIFT (4) -#define S3C2410_UFSTAT_RXMASK (15<<0) -#define S3C2410_UFSTAT_RXSHIFT (0) - -/* UFSTAT S3C2443 same as S3C2440 */ -#define S3C2440_UFSTAT_TXFULL (1<<14) -#define S3C2440_UFSTAT_RXFULL (1<<6) -#define S3C2440_UFSTAT_TXSHIFT (8) -#define S3C2440_UFSTAT_RXSHIFT (0) -#define S3C2440_UFSTAT_TXMASK (63<<8) -#define S3C2440_UFSTAT_RXMASK (63) - -#define S3C2410_UTRSTAT_TXE (1<<2) -#define S3C2410_UTRSTAT_TXFE (1<<1) -#define S3C2410_UTRSTAT_RXDR (1<<0) - -#define S3C2410_UERSTAT_OVERRUN (1<<0) -#define S3C2410_UERSTAT_FRAME (1<<2) -#define S3C2410_UERSTAT_BREAK (1<<3) -#define S3C2443_UERSTAT_PARITY (1<<1) - -#define S3C2410_UERSTAT_ANY (S3C2410_UERSTAT_OVERRUN | \ - S3C2410_UERSTAT_FRAME | \ - S3C2410_UERSTAT_BREAK) - -#define S3C2410_UMSTAT_CTS (1<<0) -#define S3C2410_UMSTAT_DeltaCTS (1<<2) - -#define S3C2443_DIVSLOT (0x2C) - -#ifndef __ASSEMBLY__ - -/* struct s3c24xx_uart_clksrc - * - * this structure defines a named clock source that can be used for the - * uart, so that the best clock can be selected for the requested baud - * rate. - * - * min_baud and max_baud define the range of baud-rates this clock is - * acceptable for, if they are both zero, it is assumed any baud rate that - * can be generated from this clock will be used. - * - * divisor gives the divisor from the clock to the one seen by the uart -*/ - -struct s3c24xx_uart_clksrc { - const char *name; - unsigned int divisor; - unsigned int min_baud; - unsigned int max_baud; -}; - -/* configuration structure for per-machine configurations for the - * serial port - * - * the pointer is setup by the machine specific initialisation from the - * arch/arm/mach-s3c2410/ directory. -*/ - -struct s3c2410_uartcfg { - unsigned char hwport; /* hardware port number */ - unsigned char unused; - unsigned short flags; - upf_t uart_flags; /* default uart flags */ - - unsigned long ucon; /* value of ucon for port */ - unsigned long ulcon; /* value of ulcon for port */ - unsigned long ufcon; /* value of ufcon for port */ - - struct s3c24xx_uart_clksrc *clocks; - unsigned int clocks_size; -}; - -/* s3c24xx_uart_devs - * - * this is exported from the core as we cannot use driver_register(), - * or platform_add_device() before the console_initcall() -*/ - -extern struct platform_device *s3c24xx_uart_devs[3]; - -#endif /* __ASSEMBLY__ */ - -#endif /* __ASM_ARM_REGS_SERIAL_H */ - diff --git a/include/asm-arm/plat-s3c/regs-timer.h b/include/asm-arm/plat-s3c/regs-timer.h deleted file mode 100644 index cc0eedd53e38..000000000000 --- a/include/asm-arm/plat-s3c/regs-timer.h +++ /dev/null @@ -1,115 +0,0 @@ -/* arch/arm/mach-s3c2410/include/mach/regs-timer.h - * - * Copyright (c) 2003 Simtec Electronics - * http://www.simtec.co.uk/products/SWLINUX/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * S3C2410 Timer configuration -*/ - - -#ifndef __ASM_ARCH_REGS_TIMER_H -#define __ASM_ARCH_REGS_TIMER_H - -#define S3C_TIMERREG(x) (S3C_VA_TIMER + (x)) -#define S3C_TIMERREG2(tmr,reg) S3C_TIMERREG((reg)+0x0c+((tmr)*0x0c)) - -#define S3C2410_TCFG0 S3C_TIMERREG(0x00) -#define S3C2410_TCFG1 S3C_TIMERREG(0x04) -#define S3C2410_TCON S3C_TIMERREG(0x08) - -#define S3C2410_TCFG_PRESCALER0_MASK (255<<0) -#define S3C2410_TCFG_PRESCALER1_MASK (255<<8) -#define S3C2410_TCFG_PRESCALER1_SHIFT (8) -#define S3C2410_TCFG_DEADZONE_MASK (255<<16) -#define S3C2410_TCFG_DEADZONE_SHIFT (16) - -#define S3C2410_TCFG1_MUX4_DIV2 (0<<16) -#define S3C2410_TCFG1_MUX4_DIV4 (1<<16) -#define S3C2410_TCFG1_MUX4_DIV8 (2<<16) -#define S3C2410_TCFG1_MUX4_DIV16 (3<<16) -#define S3C2410_TCFG1_MUX4_TCLK1 (4<<16) -#define S3C2410_TCFG1_MUX4_MASK (15<<16) -#define S3C2410_TCFG1_MUX4_SHIFT (16) - -#define S3C2410_TCFG1_MUX3_DIV2 (0<<12) -#define S3C2410_TCFG1_MUX3_DIV4 (1<<12) -#define S3C2410_TCFG1_MUX3_DIV8 (2<<12) -#define S3C2410_TCFG1_MUX3_DIV16 (3<<12) -#define S3C2410_TCFG1_MUX3_TCLK1 (4<<12) -#define S3C2410_TCFG1_MUX3_MASK (15<<12) - - -#define S3C2410_TCFG1_MUX2_DIV2 (0<<8) -#define S3C2410_TCFG1_MUX2_DIV4 (1<<8) -#define S3C2410_TCFG1_MUX2_DIV8 (2<<8) -#define S3C2410_TCFG1_MUX2_DIV16 (3<<8) -#define S3C2410_TCFG1_MUX2_TCLK1 (4<<8) -#define S3C2410_TCFG1_MUX2_MASK (15<<8) - - -#define S3C2410_TCFG1_MUX1_DIV2 (0<<4) -#define S3C2410_TCFG1_MUX1_DIV4 (1<<4) -#define S3C2410_TCFG1_MUX1_DIV8 (2<<4) -#define S3C2410_TCFG1_MUX1_DIV16 (3<<4) -#define S3C2410_TCFG1_MUX1_TCLK0 (4<<4) -#define S3C2410_TCFG1_MUX1_MASK (15<<4) - -#define S3C2410_TCFG1_MUX0_DIV2 (0<<0) -#define S3C2410_TCFG1_MUX0_DIV4 (1<<0) -#define S3C2410_TCFG1_MUX0_DIV8 (2<<0) -#define S3C2410_TCFG1_MUX0_DIV16 (3<<0) -#define S3C2410_TCFG1_MUX0_TCLK0 (4<<0) -#define S3C2410_TCFG1_MUX0_MASK (15<<0) - -#define S3C2410_TCFG1_MUX_DIV2 (0<<0) -#define S3C2410_TCFG1_MUX_DIV4 (1<<0) -#define S3C2410_TCFG1_MUX_DIV8 (2<<0) -#define S3C2410_TCFG1_MUX_DIV16 (3<<0) -#define S3C2410_TCFG1_MUX_TCLK (4<<0) -#define S3C2410_TCFG1_MUX_MASK (15<<0) - -#define S3C2410_TCFG1_SHIFT(x) ((x) * 4) - -/* for each timer, we have an count buffer, an compare buffer and - * an observation buffer -*/ - -/* WARNING - timer 4 has no buffer reg, and it's observation is at +4 */ - -#define S3C2410_TCNTB(tmr) S3C_TIMERREG2(tmr, 0x00) -#define S3C2410_TCMPB(tmr) S3C_TIMERREG2(tmr, 0x04) -#define S3C2410_TCNTO(tmr) S3C_TIMERREG2(tmr, (((tmr) == 4) ? 0x04 : 0x08)) - -#define S3C2410_TCON_T4RELOAD (1<<22) -#define S3C2410_TCON_T4MANUALUPD (1<<21) -#define S3C2410_TCON_T4START (1<<20) - -#define S3C2410_TCON_T3RELOAD (1<<19) -#define S3C2410_TCON_T3INVERT (1<<18) -#define S3C2410_TCON_T3MANUALUPD (1<<17) -#define S3C2410_TCON_T3START (1<<16) - -#define S3C2410_TCON_T2RELOAD (1<<15) -#define S3C2410_TCON_T2INVERT (1<<14) -#define S3C2410_TCON_T2MANUALUPD (1<<13) -#define S3C2410_TCON_T2START (1<<12) - -#define S3C2410_TCON_T1RELOAD (1<<11) -#define S3C2410_TCON_T1INVERT (1<<10) -#define S3C2410_TCON_T1MANUALUPD (1<<9) -#define S3C2410_TCON_T1START (1<<8) - -#define S3C2410_TCON_T0DEADZONE (1<<4) -#define S3C2410_TCON_T0RELOAD (1<<3) -#define S3C2410_TCON_T0INVERT (1<<2) -#define S3C2410_TCON_T0MANUALUPD (1<<1) -#define S3C2410_TCON_T0START (1<<0) - -#endif /* __ASM_ARCH_REGS_TIMER_H */ - - - diff --git a/include/asm-arm/plat-s3c/uncompress.h b/include/asm-arm/plat-s3c/uncompress.h index 19b9eda39485..4df006b9cc10 100644 --- a/include/asm-arm/plat-s3c/uncompress.h +++ b/include/asm-arm/plat-s3c/uncompress.h @@ -27,7 +27,7 @@ static void arch_detect_cpu(void); /* defines for UART registers */ -#include +#include #include /* working in physical space... */ diff --git a/include/asm-arm/plat-s3c24xx/cpu.h b/include/asm-arm/plat-s3c24xx/cpu.h deleted file mode 100644 index 23e420e8bd5b..000000000000 --- a/include/asm-arm/plat-s3c24xx/cpu.h +++ /dev/null @@ -1,54 +0,0 @@ -/* linux/include/asm-arm/plat-s3c24xx/cpu.h - * - * Copyright (c) 2004-2005 Simtec Electronics - * Ben Dooks - * - * Header file for S3C24XX CPU support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -/* todo - fix when rmk changes iodescs to use `void __iomem *` */ - -#define IODESC_ENT(x) { (unsigned long)S3C24XX_VA_##x, __phys_to_pfn(S3C24XX_PA_##x), S3C24XX_SZ_##x, MT_DEVICE } - -#ifndef MHZ -#define MHZ (1000*1000) -#endif - -#define print_mhz(m) ((m) / MHZ), ((m / 1000) % 1000) - -/* forward declaration */ -struct s3c24xx_uart_resources; -struct platform_device; -struct s3c2410_uartcfg; -struct map_desc; - -/* core initialisation functions */ - -extern void s3c24xx_init_irq(void); - -extern void s3c24xx_init_io(struct map_desc *mach_desc, int size); - -extern void s3c24xx_init_uarts(struct s3c2410_uartcfg *cfg, int no); - -extern void s3c24xx_init_clocks(int xtal); - -extern void s3c24xx_init_uartdevs(char *name, - struct s3c24xx_uart_resources *res, - struct s3c2410_uartcfg *cfg, int no); - -/* timer for 2410/2440 */ - -struct sys_timer; -extern struct sys_timer s3c24xx_timer; - -/* system device classes */ - -extern struct sysdev_class s3c2410_sysclass; -extern struct sysdev_class s3c2412_sysclass; -extern struct sysdev_class s3c2440_sysclass; -extern struct sysdev_class s3c2442_sysclass; -extern struct sysdev_class s3c2443_sysclass; diff --git a/include/asm-arm/plat-s3c24xx/devs.h b/include/asm-arm/plat-s3c24xx/devs.h deleted file mode 100644 index badaac9d64a8..000000000000 --- a/include/asm-arm/plat-s3c24xx/devs.h +++ /dev/null @@ -1,49 +0,0 @@ -/* linux/include/asm-arm/plat-s3c24xx/devs.h - * - * Copyright (c) 2004 Simtec Electronics - * Ben Dooks - * - * Header file for s3c2410 standard platform devices - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ -#include - -struct s3c24xx_uart_resources { - struct resource *resources; - unsigned long nr_resources; -}; - -extern struct s3c24xx_uart_resources s3c2410_uart_resources[]; - -extern struct platform_device *s3c24xx_uart_devs[]; -extern struct platform_device *s3c24xx_uart_src[]; - -extern struct platform_device s3c_device_timer[]; - -extern struct platform_device s3c_device_usb; -extern struct platform_device s3c_device_lcd; -extern struct platform_device s3c_device_wdt; -extern struct platform_device s3c_device_i2c; -extern struct platform_device s3c_device_iis; -extern struct platform_device s3c_device_rtc; -extern struct platform_device s3c_device_adc; -extern struct platform_device s3c_device_sdi; -extern struct platform_device s3c_device_hsmmc; - -extern struct platform_device s3c_device_spi0; -extern struct platform_device s3c_device_spi1; - -extern struct platform_device s3c_device_nand; - -extern struct platform_device s3c_device_usbgadget; - -/* s3c2440 specific devices */ - -#ifdef CONFIG_CPU_S3C2440 - -extern struct platform_device s3c_device_camif; - -#endif diff --git a/include/asm-arm/plat-s3c24xx/irq.h b/include/asm-arm/plat-s3c24xx/irq.h deleted file mode 100644 index 45746a995343..000000000000 --- a/include/asm-arm/plat-s3c24xx/irq.h +++ /dev/null @@ -1,109 +0,0 @@ -/* linux/include/asm-arm/plat-s3c24xx/irq.h - * - * Copyright (c) 2004-2005 Simtec Electronics - * Ben Dooks - * - * Header file for S3C24XX CPU IRQ support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#define irqdbf(x...) -#define irqdbf2(x...) - -#define EXTINT_OFF (IRQ_EINT4 - 4) - -/* these are exported for arch/arm/mach-* usage */ -extern struct irq_chip s3c_irq_level_chip; -extern struct irq_chip s3c_irq_chip; - -static inline void -s3c_irqsub_mask(unsigned int irqno, unsigned int parentbit, - int subcheck) -{ - unsigned long mask; - unsigned long submask; - - submask = __raw_readl(S3C2410_INTSUBMSK); - mask = __raw_readl(S3C2410_INTMSK); - - submask |= (1UL << (irqno - IRQ_S3CUART_RX0)); - - /* check to see if we need to mask the parent IRQ */ - - if ((submask & subcheck) == subcheck) { - __raw_writel(mask | parentbit, S3C2410_INTMSK); - } - - /* write back masks */ - __raw_writel(submask, S3C2410_INTSUBMSK); - -} - -static inline void -s3c_irqsub_unmask(unsigned int irqno, unsigned int parentbit) -{ - unsigned long mask; - unsigned long submask; - - submask = __raw_readl(S3C2410_INTSUBMSK); - mask = __raw_readl(S3C2410_INTMSK); - - submask &= ~(1UL << (irqno - IRQ_S3CUART_RX0)); - mask &= ~parentbit; - - /* write back masks */ - __raw_writel(submask, S3C2410_INTSUBMSK); - __raw_writel(mask, S3C2410_INTMSK); -} - - -static inline void -s3c_irqsub_maskack(unsigned int irqno, unsigned int parentmask, unsigned int group) -{ - unsigned int bit = 1UL << (irqno - IRQ_S3CUART_RX0); - - s3c_irqsub_mask(irqno, parentmask, group); - - __raw_writel(bit, S3C2410_SUBSRCPND); - - /* only ack parent if we've got all the irqs (seems we must - * ack, all and hope that the irq system retriggers ok when - * the interrupt goes off again) - */ - - if (1) { - __raw_writel(parentmask, S3C2410_SRCPND); - __raw_writel(parentmask, S3C2410_INTPND); - } -} - -static inline void -s3c_irqsub_ack(unsigned int irqno, unsigned int parentmask, unsigned int group) -{ - unsigned int bit = 1UL << (irqno - IRQ_S3CUART_RX0); - - __raw_writel(bit, S3C2410_SUBSRCPND); - - /* only ack parent if we've got all the irqs (seems we must - * ack, all and hope that the irq system retriggers ok when - * the interrupt goes off again) - */ - - if (1) { - __raw_writel(parentmask, S3C2410_SRCPND); - __raw_writel(parentmask, S3C2410_INTPND); - } -} - -/* exported for use in arch/arm/mach-s3c2410 */ - -#ifdef CONFIG_PM -extern int s3c_irq_wake(unsigned int irqno, unsigned int state); -#else -#define s3c_irq_wake NULL -#endif - -extern int s3c_irqext_type(unsigned int irq, unsigned int type); diff --git a/include/asm-arm/plat-s3c24xx/pm.h b/include/asm-arm/plat-s3c24xx/pm.h deleted file mode 100644 index cc623667e48a..000000000000 --- a/include/asm-arm/plat-s3c24xx/pm.h +++ /dev/null @@ -1,73 +0,0 @@ -/* linux/include/asm-arm/plat-s3c24xx/pm.h - * - * Copyright (c) 2004 Simtec Electronics - * Written by Ben Dooks, - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -/* s3c2410_pm_init - * - * called from board at initialisation time to setup the power - * management -*/ - -#ifdef CONFIG_PM - -extern __init int s3c2410_pm_init(void); - -#else - -static inline int s3c2410_pm_init(void) -{ - return 0; -} -#endif - -/* configuration for the IRQ mask over sleep */ -extern unsigned long s3c_irqwake_intmask; -extern unsigned long s3c_irqwake_eintmask; - -/* IRQ masks for IRQs allowed to go to sleep (see irq.c) */ -extern unsigned long s3c_irqwake_intallow; -extern unsigned long s3c_irqwake_eintallow; - -/* per-cpu sleep functions */ - -extern void (*pm_cpu_prep)(void); -extern void (*pm_cpu_sleep)(void); - -/* Flags for PM Control */ - -extern unsigned long s3c_pm_flags; - -/* from sleep.S */ - -extern int s3c2410_cpu_save(unsigned long *saveblk); -extern void s3c2410_cpu_suspend(void); -extern void s3c2410_cpu_resume(void); - -extern unsigned long s3c2410_sleep_save_phys; - -/* sleep save info */ - -struct sleep_save { - void __iomem *reg; - unsigned long val; -}; - -#define SAVE_ITEM(x) \ - { .reg = (x) } - -extern void s3c2410_pm_do_save(struct sleep_save *ptr, int count); -extern void s3c2410_pm_do_restore(struct sleep_save *ptr, int count); - -#ifdef CONFIG_PM -extern int s3c24xx_irq_suspend(struct sys_device *dev, pm_message_t state); -extern int s3c24xx_irq_resume(struct sys_device *dev); -#else -#define s3c24xx_irq_suspend NULL -#define s3c24xx_irq_resume NULL -#endif diff --git a/include/asm-arm/plat-s3c24xx/s3c2400.h b/include/asm-arm/plat-s3c24xx/s3c2400.h deleted file mode 100644 index 3a5a16821af8..000000000000 --- a/include/asm-arm/plat-s3c24xx/s3c2400.h +++ /dev/null @@ -1,31 +0,0 @@ -/* linux/include/asm-arm/plat-s3c24xx/s3c2400.h - * - * Copyright (c) 2004 Simtec Electronics - * Ben Dooks - * - * Header file for S3C2400 cpu support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * Modifications: - * 09-Fev-2006 LCVR First version, based on s3c2410.h -*/ - -#ifdef CONFIG_CPU_S3C2400 - -extern int s3c2400_init(void); - -extern void s3c2400_map_io(struct map_desc *mach_desc, int size); - -extern void s3c2400_init_uarts(struct s3c2410_uartcfg *cfg, int no); - -extern void s3c2400_init_clocks(int xtal); - -#else -#define s3c2400_init_clocks NULL -#define s3c2400_init_uarts NULL -#define s3c2400_map_io NULL -#define s3c2400_init NULL -#endif diff --git a/include/asm-arm/plat-s3c24xx/s3c2410.h b/include/asm-arm/plat-s3c24xx/s3c2410.h deleted file mode 100644 index 3cd1ec677b3f..000000000000 --- a/include/asm-arm/plat-s3c24xx/s3c2410.h +++ /dev/null @@ -1,31 +0,0 @@ -/* linux/include/asm-arm/plat-s3c24xx/s3c2410.h - * - * Copyright (c) 2004 Simtec Electronics - * Ben Dooks - * - * Header file for s3c2410 machine directory - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * -*/ - -#ifdef CONFIG_CPU_S3C2410 - -extern int s3c2410_init(void); - -extern void s3c2410_map_io(struct map_desc *mach_desc, int size); - -extern void s3c2410_init_uarts(struct s3c2410_uartcfg *cfg, int no); - -extern void s3c2410_init_clocks(int xtal); - -#else -#define s3c2410_init_clocks NULL -#define s3c2410_init_uarts NULL -#define s3c2410_map_io NULL -#define s3c2410_init NULL -#endif - -extern int s3c2410_baseclk_add(void); diff --git a/include/asm-arm/plat-s3c24xx/s3c2440.h b/include/asm-arm/plat-s3c24xx/s3c2440.h deleted file mode 100644 index 107853bf9481..000000000000 --- a/include/asm-arm/plat-s3c24xx/s3c2440.h +++ /dev/null @@ -1,17 +0,0 @@ -/* linux/include/asm-arm/plat-s3c24xx/s3c2440.h - * - * Copyright (c) 2004-2005 Simtec Electronics - * Ben Dooks - * - * Header file for s3c2440 cpu support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifdef CONFIG_CPU_S3C2440 -extern int s3c2440_init(void); -#else -#define s3c2440_init NULL -#endif diff --git a/include/asm-arm/plat-s3c24xx/s3c2442.h b/include/asm-arm/plat-s3c24xx/s3c2442.h deleted file mode 100644 index 451a23a2092a..000000000000 --- a/include/asm-arm/plat-s3c24xx/s3c2442.h +++ /dev/null @@ -1,17 +0,0 @@ -/* linux/include/asm-arm/plat-s3c24xx/s3c2442.h - * - * Copyright (c) 2006 Simtec Electronics - * Ben Dooks - * - * Header file for s3c2442 cpu support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifdef CONFIG_CPU_S3C2442 -extern int s3c2442_init(void); -#else -#define s3c2442_init NULL -#endif diff --git a/include/asm-arm/plat-s3c24xx/s3c2443.h b/include/asm-arm/plat-s3c24xx/s3c2443.h deleted file mode 100644 index 11d83b5c84e6..000000000000 --- a/include/asm-arm/plat-s3c24xx/s3c2443.h +++ /dev/null @@ -1,32 +0,0 @@ -/* linux/include/asm-arm/plat-s3c24xx/s3c2443.h - * - * Copyright (c) 2004-2005 Simtec Electronics - * Ben Dooks - * - * Header file for s3c2443 cpu support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifdef CONFIG_CPU_S3C2443 - -struct s3c2410_uartcfg; - -extern int s3c2443_init(void); - -extern void s3c2443_map_io(struct map_desc *mach_desc, int size); - -extern void s3c2443_init_uarts(struct s3c2410_uartcfg *cfg, int no); - -extern void s3c2443_init_clocks(int xtal); - -extern int s3c2443_baseclk_add(void); - -#else -#define s3c2443_init_clocks NULL -#define s3c2443_init_uarts NULL -#define s3c2443_map_io NULL -#define s3c2443_init NULL -#endif -- cgit v1.2.3 From d5120ae72a066b18f98e0c45ce73262f58030851 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Tue, 7 Oct 2008 23:09:51 +0100 Subject: [ARM] S3C24XX: Additional include moves Continue moving the include files into arch/arm Signed-off-by: Ben Dooks --- arch/arm/mach-s3c2410/clock.c | 2 +- arch/arm/mach-s3c2410/dma.c | 2 +- arch/arm/mach-s3c2410/include/mach/map.h | 2 +- arch/arm/mach-s3c2410/include/mach/uncompress.h | 2 +- arch/arm/mach-s3c2410/mach-bast.c | 2 +- arch/arm/mach-s3c2410/mach-h1940.c | 2 +- arch/arm/mach-s3c2410/mach-n30.c | 2 +- arch/arm/mach-s3c2410/mach-otom.c | 2 +- arch/arm/mach-s3c2410/mach-qt2410.c | 2 +- arch/arm/mach-s3c2410/mach-smdk2410.c | 2 +- arch/arm/mach-s3c2410/mach-vr1000.c | 2 +- arch/arm/mach-s3c2410/s3c2410.c | 2 +- arch/arm/mach-s3c2412/clock.c | 4 +- arch/arm/mach-s3c2412/dma.c | 2 +- arch/arm/mach-s3c2412/mach-jive.c | 2 +- arch/arm/mach-s3c2412/mach-smdk2413.c | 6 +- arch/arm/mach-s3c2412/mach-vstms.c | 4 +- arch/arm/mach-s3c2412/pm.c | 2 +- arch/arm/mach-s3c2412/s3c2412.c | 4 +- arch/arm/mach-s3c2440/clock.c | 2 +- arch/arm/mach-s3c2440/dma.c | 2 +- arch/arm/mach-s3c2440/mach-anubis.c | 2 +- arch/arm/mach-s3c2440/mach-at2440evb.c | 2 +- arch/arm/mach-s3c2440/mach-nexcoder.c | 2 +- arch/arm/mach-s3c2440/mach-osiris.c | 2 +- arch/arm/mach-s3c2440/mach-rx3715.c | 2 +- arch/arm/mach-s3c2440/mach-smdk2440.c | 4 +- arch/arm/mach-s3c2442/clock.c | 2 +- arch/arm/mach-s3c2443/clock.c | 2 +- arch/arm/mach-s3c2443/dma.c | 2 +- arch/arm/mach-s3c2443/mach-smdk2443.c | 4 +- arch/arm/plat-s3c/include/plat/map.h | 40 ++++++ arch/arm/plat-s3c/include/plat/regs-adc.h | 60 +++++++++ arch/arm/plat-s3c/include/plat/uncompress.h | 155 +++++++++++++++++++++++ arch/arm/plat-s3c24xx/clock.c | 2 +- arch/arm/plat-s3c24xx/common-smdk.c | 2 +- arch/arm/plat-s3c24xx/cpu.c | 4 +- arch/arm/plat-s3c24xx/dma.c | 2 +- arch/arm/plat-s3c24xx/include/plat/clock.h | 64 ++++++++++ arch/arm/plat-s3c24xx/include/plat/common-smdk.h | 15 +++ arch/arm/plat-s3c24xx/include/plat/dma.h | 82 ++++++++++++ arch/arm/plat-s3c24xx/include/plat/s3c2412.h | 29 +++++ arch/arm/plat-s3c24xx/pwm-clock.c | 2 +- arch/arm/plat-s3c24xx/s3c244x-clock.c | 2 +- arch/arm/plat-s3c24xx/s3c244x.c | 2 +- arch/arm/plat-s3c24xx/time.c | 2 +- include/asm-arm/plat-s3c/map.h | 40 ------ include/asm-arm/plat-s3c/regs-adc.h | 60 --------- include/asm-arm/plat-s3c/uncompress.h | 155 ----------------------- include/asm-arm/plat-s3c24xx/clock.h | 64 ---------- include/asm-arm/plat-s3c24xx/common-smdk.h | 15 --- include/asm-arm/plat-s3c24xx/dma.h | 82 ------------ include/asm-arm/plat-s3c24xx/s3c2412.h | 29 ----- 53 files changed, 492 insertions(+), 492 deletions(-) create mode 100644 arch/arm/plat-s3c/include/plat/map.h create mode 100644 arch/arm/plat-s3c/include/plat/regs-adc.h create mode 100644 arch/arm/plat-s3c/include/plat/uncompress.h create mode 100644 arch/arm/plat-s3c24xx/include/plat/clock.h create mode 100644 arch/arm/plat-s3c24xx/include/plat/common-smdk.h create mode 100644 arch/arm/plat-s3c24xx/include/plat/dma.h create mode 100644 arch/arm/plat-s3c24xx/include/plat/s3c2412.h delete mode 100644 include/asm-arm/plat-s3c/map.h delete mode 100644 include/asm-arm/plat-s3c/regs-adc.h delete mode 100644 include/asm-arm/plat-s3c/uncompress.h delete mode 100644 include/asm-arm/plat-s3c24xx/clock.h delete mode 100644 include/asm-arm/plat-s3c24xx/common-smdk.h delete mode 100644 include/asm-arm/plat-s3c24xx/dma.h delete mode 100644 include/asm-arm/plat-s3c24xx/s3c2412.h diff --git a/arch/arm/mach-s3c2410/clock.c b/arch/arm/mach-s3c2410/clock.c index f0172d2c33bb..c9ac206f349b 100644 --- a/arch/arm/mach-s3c2410/clock.c +++ b/arch/arm/mach-s3c2410/clock.c @@ -42,7 +42,7 @@ #include #include -#include +#include #include int s3c2410_clkcon_enable(struct clk *clk, int enable) diff --git a/arch/arm/mach-s3c2410/dma.c b/arch/arm/mach-s3c2410/dma.c index 99b6d68b754c..7d914a470b6c 100644 --- a/arch/arm/mach-s3c2410/dma.c +++ b/arch/arm/mach-s3c2410/dma.c @@ -21,7 +21,7 @@ #include #include -#include +#include #include #include diff --git a/arch/arm/mach-s3c2410/include/mach/map.h b/arch/arm/mach-s3c2410/include/mach/map.h index 64bf7e94a5bf..23c470c2e5b1 100644 --- a/arch/arm/mach-s3c2410/include/mach/map.h +++ b/arch/arm/mach-s3c2410/include/mach/map.h @@ -13,7 +13,7 @@ #ifndef __ASM_ARCH_MAP_H #define __ASM_ARCH_MAP_H -#include +#include #define S3C2410_ADDR(x) S3C_ADDR(x) diff --git a/arch/arm/mach-s3c2410/include/mach/uncompress.h b/arch/arm/mach-s3c2410/include/mach/uncompress.h index 708e47459ffc..ab39491beee2 100644 --- a/arch/arm/mach-s3c2410/include/mach/uncompress.h +++ b/arch/arm/mach-s3c2410/include/mach/uncompress.h @@ -21,7 +21,7 @@ #undef S3C2410_GPIOREG #define S3C2410_GPIOREG(x) ((S3C24XX_PA_GPIO + (x))) -#include +#include static inline int is_arm926(void) { diff --git a/arch/arm/mach-s3c2410/mach-bast.c b/arch/arm/mach-s3c2410/mach-bast.c index a01e3d3b0dff..599c0c227b96 100644 --- a/arch/arm/mach-s3c2410/mach-bast.c +++ b/arch/arm/mach-s3c2410/mach-bast.c @@ -55,7 +55,7 @@ #include -#include +#include #include #include diff --git a/arch/arm/mach-s3c2410/mach-h1940.c b/arch/arm/mach-s3c2410/mach-h1940.c index f9538d1965f3..21b365739430 100644 --- a/arch/arm/mach-s3c2410/mach-h1940.c +++ b/arch/arm/mach-s3c2410/mach-h1940.c @@ -40,7 +40,7 @@ #include #include -#include +#include #include #include #include diff --git a/arch/arm/mach-s3c2410/mach-n30.c b/arch/arm/mach-s3c2410/mach-n30.c index f9cc338a9c4c..b0534ad5bc11 100644 --- a/arch/arm/mach-s3c2410/mach-n30.c +++ b/arch/arm/mach-s3c2410/mach-n30.c @@ -43,7 +43,7 @@ #include #include -#include +#include #include #include #include diff --git a/arch/arm/mach-s3c2410/mach-otom.c b/arch/arm/mach-s3c2410/mach-otom.c index d49dbb0a4c8d..3a32e1636aa4 100644 --- a/arch/arm/mach-s3c2410/mach-otom.c +++ b/arch/arm/mach-s3c2410/mach-otom.c @@ -33,7 +33,7 @@ #include #include -#include +#include #include #include diff --git a/arch/arm/mach-s3c2410/mach-qt2410.c b/arch/arm/mach-s3c2410/mach-qt2410.c index c3277258ecaf..53ad949ef6c2 100644 --- a/arch/arm/mach-s3c2410/mach-qt2410.c +++ b/arch/arm/mach-s3c2410/mach-qt2410.c @@ -56,7 +56,7 @@ #include #include -#include +#include #include #include #include diff --git a/arch/arm/mach-s3c2410/mach-smdk2410.c b/arch/arm/mach-s3c2410/mach-smdk2410.c index 6d940640a74f..406cba871c65 100644 --- a/arch/arm/mach-s3c2410/mach-smdk2410.c +++ b/arch/arm/mach-s3c2410/mach-smdk2410.c @@ -51,7 +51,7 @@ #include #include -#include +#include static struct map_desc smdk2410_iodesc[] __initdata = { /* nothing here yet */ diff --git a/arch/arm/mach-s3c2410/mach-vr1000.c b/arch/arm/mach-s3c2410/mach-vr1000.c index 41a2a0ee3557..99c82079335e 100644 --- a/arch/arm/mach-s3c2410/mach-vr1000.c +++ b/arch/arm/mach-s3c2410/mach-vr1000.c @@ -44,7 +44,7 @@ #include #include -#include +#include #include #include diff --git a/arch/arm/mach-s3c2410/s3c2410.c b/arch/arm/mach-s3c2410/s3c2410.c index 97173d360594..e84c166a6f6e 100644 --- a/arch/arm/mach-s3c2410/s3c2410.c +++ b/arch/arm/mach-s3c2410/s3c2410.c @@ -34,7 +34,7 @@ #include #include #include -#include +#include /* Initial IO mappings */ diff --git a/arch/arm/mach-s3c2412/clock.c b/arch/arm/mach-s3c2412/clock.c index 8b3382d24799..8be4cd677385 100644 --- a/arch/arm/mach-s3c2412/clock.c +++ b/arch/arm/mach-s3c2412/clock.c @@ -41,8 +41,8 @@ #include #include -#include -#include +#include +#include #include /* We currently have to assume that the system is running diff --git a/arch/arm/mach-s3c2412/dma.c b/arch/arm/mach-s3c2412/dma.c index d4af572f22fd..6038e9f30ad8 100644 --- a/arch/arm/mach-s3c2412/dma.c +++ b/arch/arm/mach-s3c2412/dma.c @@ -21,7 +21,7 @@ #include #include -#include +#include #include #include diff --git a/arch/arm/mach-s3c2412/mach-jive.c b/arch/arm/mach-s3c2412/mach-jive.c index 246c6dbcd87c..b08f18c8c47a 100644 --- a/arch/arm/mach-s3c2412/mach-jive.c +++ b/arch/arm/mach-s3c2412/mach-jive.c @@ -48,7 +48,7 @@ #include #include -#include +#include #include #include #include diff --git a/arch/arm/mach-s3c2412/mach-smdk2413.c b/arch/arm/mach-s3c2412/mach-smdk2413.c index ae8dea1dbd83..cd20dbbf9c27 100644 --- a/arch/arm/mach-s3c2412/mach-smdk2413.c +++ b/arch/arm/mach-s3c2412/mach-smdk2413.c @@ -41,12 +41,12 @@ #include #include -#include -#include +#include +#include #include #include -#include +#include static struct map_desc smdk2413_iodesc[] __initdata = { }; diff --git a/arch/arm/mach-s3c2412/mach-vstms.c b/arch/arm/mach-s3c2412/mach-vstms.c index 4e84d404bf26..70463ccdb5fe 100644 --- a/arch/arm/mach-s3c2412/mach-vstms.c +++ b/arch/arm/mach-s3c2412/mach-vstms.c @@ -43,8 +43,8 @@ #include #include -#include -#include +#include +#include #include #include diff --git a/arch/arm/mach-s3c2412/pm.c b/arch/arm/mach-s3c2412/pm.c index 3e5575f66863..4c988a44d286 100644 --- a/arch/arm/mach-s3c2412/pm.c +++ b/arch/arm/mach-s3c2412/pm.c @@ -31,7 +31,7 @@ #include #include -#include +#include extern void s3c2412_sleep_enter(void); diff --git a/arch/arm/mach-s3c2412/s3c2412.c b/arch/arm/mach-s3c2412/s3c2412.c index 4262de06f920..4f18dfc04226 100644 --- a/arch/arm/mach-s3c2412/s3c2412.c +++ b/arch/arm/mach-s3c2412/s3c2412.c @@ -42,10 +42,10 @@ #include #include -#include +#include #include #include -#include +#include #include #ifndef CONFIG_CPU_S3C2412_ONLY diff --git a/arch/arm/mach-s3c2440/clock.c b/arch/arm/mach-s3c2440/clock.c index bb1101f6a896..70aba1e9f7da 100644 --- a/arch/arm/mach-s3c2440/clock.c +++ b/arch/arm/mach-s3c2440/clock.c @@ -41,7 +41,7 @@ #include -#include +#include #include /* S3C2440 extended clock support */ diff --git a/arch/arm/mach-s3c2440/dma.c b/arch/arm/mach-s3c2440/dma.c index b674f869e57c..32303f6a8321 100644 --- a/arch/arm/mach-s3c2440/dma.c +++ b/arch/arm/mach-s3c2440/dma.c @@ -20,7 +20,7 @@ #include #include -#include +#include #include #include diff --git a/arch/arm/mach-s3c2440/mach-anubis.c b/arch/arm/mach-s3c2440/mach-anubis.c index a37f8b220572..1309fbe58543 100644 --- a/arch/arm/mach-s3c2440/mach-anubis.c +++ b/arch/arm/mach-s3c2440/mach-anubis.c @@ -49,7 +49,7 @@ #include -#include +#include #include #include diff --git a/arch/arm/mach-s3c2440/mach-at2440evb.c b/arch/arm/mach-s3c2440/mach-at2440evb.c index 5114b87d8cfd..66876c6f2f1c 100644 --- a/arch/arm/mach-s3c2440/mach-at2440evb.c +++ b/arch/arm/mach-s3c2440/mach-at2440evb.c @@ -42,7 +42,7 @@ #include #include -#include +#include #include #include diff --git a/arch/arm/mach-s3c2440/mach-nexcoder.c b/arch/arm/mach-s3c2440/mach-nexcoder.c index 9d8259589856..76b8991dc23d 100644 --- a/arch/arm/mach-s3c2440/mach-nexcoder.c +++ b/arch/arm/mach-s3c2440/mach-nexcoder.c @@ -40,7 +40,7 @@ #include #include -#include +#include #include #include diff --git a/arch/arm/mach-s3c2440/mach-osiris.c b/arch/arm/mach-s3c2440/mach-osiris.c index 5b1c32e64f0b..6de08f935a84 100644 --- a/arch/arm/mach-s3c2440/mach-osiris.c +++ b/arch/arm/mach-s3c2440/mach-osiris.c @@ -44,7 +44,7 @@ #include #include -#include +#include #include #include diff --git a/arch/arm/mach-s3c2440/mach-rx3715.c b/arch/arm/mach-s3c2440/mach-rx3715.c index 46128a170fed..1c91c586f64b 100644 --- a/arch/arm/mach-s3c2440/mach-rx3715.c +++ b/arch/arm/mach-s3c2440/mach-rx3715.c @@ -46,7 +46,7 @@ #include #include -#include +#include #include #include #include diff --git a/arch/arm/mach-s3c2440/mach-smdk2440.c b/arch/arm/mach-s3c2440/mach-smdk2440.c index e1799abec87d..2bd14a3778d4 100644 --- a/arch/arm/mach-s3c2440/mach-smdk2440.c +++ b/arch/arm/mach-s3c2440/mach-smdk2440.c @@ -40,11 +40,11 @@ #include #include -#include +#include #include #include -#include +#include static struct map_desc smdk2440_iodesc[] __initdata = { /* ISA IO Space map (memory space selected by A24) */ diff --git a/arch/arm/mach-s3c2442/clock.c b/arch/arm/mach-s3c2442/clock.c index 075db289b7f3..6bd81790c167 100644 --- a/arch/arm/mach-s3c2442/clock.c +++ b/arch/arm/mach-s3c2442/clock.c @@ -41,7 +41,7 @@ #include -#include +#include #include /* S3C2442 extended clock support */ diff --git a/arch/arm/mach-s3c2443/clock.c b/arch/arm/mach-s3c2443/clock.c index ce56b51170f7..0e849063de75 100644 --- a/arch/arm/mach-s3c2443/clock.c +++ b/arch/arm/mach-s3c2443/clock.c @@ -40,7 +40,7 @@ #include #include -#include +#include #include /* We currently have to assume that the system is running diff --git a/arch/arm/mach-s3c2443/dma.c b/arch/arm/mach-s3c2443/dma.c index e75b6e3cfc34..438a01960882 100644 --- a/arch/arm/mach-s3c2443/dma.c +++ b/arch/arm/mach-s3c2443/dma.c @@ -21,7 +21,7 @@ #include #include -#include +#include #include #include diff --git a/arch/arm/mach-s3c2443/mach-smdk2443.c b/arch/arm/mach-s3c2443/mach-smdk2443.c index b1d5637d6dc1..4ea77bfb8b0a 100644 --- a/arch/arm/mach-s3c2443/mach-smdk2443.c +++ b/arch/arm/mach-s3c2443/mach-smdk2443.c @@ -40,11 +40,11 @@ #include #include -#include +#include #include #include -#include +#include static struct map_desc smdk2443_iodesc[] __initdata = { /* ISA IO Space map (memory space selected by A24) */ diff --git a/arch/arm/plat-s3c/include/plat/map.h b/arch/arm/plat-s3c/include/plat/map.h new file mode 100644 index 000000000000..b84289d32a54 --- /dev/null +++ b/arch/arm/plat-s3c/include/plat/map.h @@ -0,0 +1,40 @@ +/* linux/include/asm-arm/plat-s3c/map.h + * + * Copyright 2003, 2007 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * Ben Dooks + * + * S3C - Memory map definitions (virtual addresses) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_PLAT_MAP_H +#define __ASM_PLAT_MAP_H __FILE__ + +/* Fit all our registers in at 0xF4000000 upwards, trying to use as + * little of the VA space as possible so vmalloc and friends have a + * better chance of getting memory. + * + * we try to ensure stuff like the IRQ registers are available for + * an single MOVS instruction (ie, only 8 bits of set data) + */ + +#define S3C_ADDR_BASE (0xF4000000) + +#ifndef __ASSEMBLY__ +#define S3C_ADDR(x) ((void __iomem __force *)S3C_ADDR_BASE + (x)) +#else +#define S3C_ADDR(x) (S3C_ADDR_BASE + (x)) +#endif + +#define S3C_VA_IRQ S3C_ADDR(0x00000000) /* irq controller(s) */ +#define S3C_VA_SYS S3C_ADDR(0x00100000) /* system control */ +#define S3C_VA_MEM S3C_ADDR(0x00200000) /* system control */ +#define S3C_VA_TIMER S3C_ADDR(0x00300000) /* timer block */ +#define S3C_VA_WATCHDOG S3C_ADDR(0x00400000) /* watchdog */ +#define S3C_VA_UART S3C_ADDR(0x01000000) /* UART */ + +#endif /* __ASM_PLAT_MAP_H */ diff --git a/arch/arm/plat-s3c/include/plat/regs-adc.h b/arch/arm/plat-s3c/include/plat/regs-adc.h new file mode 100644 index 000000000000..4323cccc86cd --- /dev/null +++ b/arch/arm/plat-s3c/include/plat/regs-adc.h @@ -0,0 +1,60 @@ +/* arch/arm/mach-s3c2410/include/mach/regs-adc.h + * + * Copyright (c) 2004 Shannon Holland + * + * This program is free software; yosu can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * S3C2410 ADC registers +*/ + +#ifndef __ASM_ARCH_REGS_ADC_H +#define __ASM_ARCH_REGS_ADC_H "regs-adc.h" + +#define S3C2410_ADCREG(x) (x) + +#define S3C2410_ADCCON S3C2410_ADCREG(0x00) +#define S3C2410_ADCTSC S3C2410_ADCREG(0x04) +#define S3C2410_ADCDLY S3C2410_ADCREG(0x08) +#define S3C2410_ADCDAT0 S3C2410_ADCREG(0x0C) +#define S3C2410_ADCDAT1 S3C2410_ADCREG(0x10) + + +/* ADCCON Register Bits */ +#define S3C2410_ADCCON_ECFLG (1<<15) +#define S3C2410_ADCCON_PRSCEN (1<<14) +#define S3C2410_ADCCON_PRSCVL(x) (((x)&0xFF)<<6) +#define S3C2410_ADCCON_PRSCVLMASK (0xFF<<6) +#define S3C2410_ADCCON_SELMUX(x) (((x)&0x7)<<3) +#define S3C2410_ADCCON_MUXMASK (0x7<<3) +#define S3C2410_ADCCON_STDBM (1<<2) +#define S3C2410_ADCCON_READ_START (1<<1) +#define S3C2410_ADCCON_ENABLE_START (1<<0) +#define S3C2410_ADCCON_STARTMASK (0x3<<0) + + +/* ADCTSC Register Bits */ +#define S3C2410_ADCTSC_YM_SEN (1<<7) +#define S3C2410_ADCTSC_YP_SEN (1<<6) +#define S3C2410_ADCTSC_XM_SEN (1<<5) +#define S3C2410_ADCTSC_XP_SEN (1<<4) +#define S3C2410_ADCTSC_PULL_UP_DISABLE (1<<3) +#define S3C2410_ADCTSC_AUTO_PST (1<<2) +#define S3C2410_ADCTSC_XY_PST(x) (((x)&0x3)<<0) + +/* ADCDAT0 Bits */ +#define S3C2410_ADCDAT0_UPDOWN (1<<15) +#define S3C2410_ADCDAT0_AUTO_PST (1<<14) +#define S3C2410_ADCDAT0_XY_PST (0x3<<12) +#define S3C2410_ADCDAT0_XPDATA_MASK (0x03FF) + +/* ADCDAT1 Bits */ +#define S3C2410_ADCDAT1_UPDOWN (1<<15) +#define S3C2410_ADCDAT1_AUTO_PST (1<<14) +#define S3C2410_ADCDAT1_XY_PST (0x3<<12) +#define S3C2410_ADCDAT1_YPDATA_MASK (0x03FF) + +#endif /* __ASM_ARCH_REGS_ADC_H */ + + diff --git a/arch/arm/plat-s3c/include/plat/uncompress.h b/arch/arm/plat-s3c/include/plat/uncompress.h new file mode 100644 index 000000000000..4df006b9cc10 --- /dev/null +++ b/arch/arm/plat-s3c/include/plat/uncompress.h @@ -0,0 +1,155 @@ +/* linux/include/asm-arm/plat-s3c/uncompress.h + * + * Copyright 2003, 2007 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * Ben Dooks + * + * S3C - uncompress code + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_PLAT_UNCOMPRESS_H +#define __ASM_PLAT_UNCOMPRESS_H + +typedef unsigned int upf_t; /* cannot include linux/serial_core.h */ + +/* uart setup */ + +static unsigned int fifo_mask; +static unsigned int fifo_max; + +/* forward declerations */ + +static void arch_detect_cpu(void); + +/* defines for UART registers */ + +#include +#include + +/* working in physical space... */ +#undef S3C2410_WDOGREG +#define S3C2410_WDOGREG(x) ((S3C24XX_PA_WATCHDOG + (x))) + +/* how many bytes we allow into the FIFO at a time in FIFO mode */ +#define FIFO_MAX (14) + +#define uart_base S3C24XX_PA_UART + (0x4000*CONFIG_S3C_LOWLEVEL_UART_PORT) + +static __inline__ void +uart_wr(unsigned int reg, unsigned int val) +{ + volatile unsigned int *ptr; + + ptr = (volatile unsigned int *)(reg + uart_base); + *ptr = val; +} + +static __inline__ unsigned int +uart_rd(unsigned int reg) +{ + volatile unsigned int *ptr; + + ptr = (volatile unsigned int *)(reg + uart_base); + return *ptr; +} + +/* we can deal with the case the UARTs are being run + * in FIFO mode, so that we don't hold up our execution + * waiting for tx to happen... +*/ + +static void putc(int ch) +{ + if (uart_rd(S3C2410_UFCON) & S3C2410_UFCON_FIFOMODE) { + int level; + + while (1) { + level = uart_rd(S3C2410_UFSTAT); + level &= fifo_mask; + + if (level < fifo_max) + break; + } + + } else { + /* not using fifos */ + + while ((uart_rd(S3C2410_UTRSTAT) & S3C2410_UTRSTAT_TXE) != S3C2410_UTRSTAT_TXE) + barrier(); + } + + /* write byte to transmission register */ + uart_wr(S3C2410_UTXH, ch); +} + +static inline void flush(void) +{ +} + +#define __raw_writel(d,ad) do { *((volatile unsigned int *)(ad)) = (d); } while(0) + +/* CONFIG_S3C_BOOT_WATCHDOG + * + * Simple boot-time watchdog setup, to reboot the system if there is + * any problem with the boot process +*/ + +#ifdef CONFIG_S3C_BOOT_WATCHDOG + +#define WDOG_COUNT (0xff00) + +static inline void arch_decomp_wdog(void) +{ + __raw_writel(WDOG_COUNT, S3C2410_WTCNT); +} + +static void arch_decomp_wdog_start(void) +{ + __raw_writel(WDOG_COUNT, S3C2410_WTDAT); + __raw_writel(WDOG_COUNT, S3C2410_WTCNT); + __raw_writel(S3C2410_WTCON_ENABLE | S3C2410_WTCON_DIV128 | S3C2410_WTCON_RSTEN | S3C2410_WTCON_PRESCALE(0x80), S3C2410_WTCON); +} + +#else +#define arch_decomp_wdog_start() +#define arch_decomp_wdog() +#endif + +#ifdef CONFIG_S3C_BOOT_ERROR_RESET + +static void arch_decomp_error(const char *x) +{ + putstr("\n\n"); + putstr(x); + putstr("\n\n -- System resetting\n"); + + __raw_writel(0x4000, S3C2410_WTDAT); + __raw_writel(0x4000, S3C2410_WTCNT); + __raw_writel(S3C2410_WTCON_ENABLE | S3C2410_WTCON_DIV128 | S3C2410_WTCON_RSTEN | S3C2410_WTCON_PRESCALE(0x40), S3C2410_WTCON); + + while(1); +} + +#define arch_error arch_decomp_error +#endif + +static void error(char *err); + +static void +arch_decomp_setup(void) +{ + /* we may need to setup the uart(s) here if we are not running + * on an BAST... the BAST will have left the uarts configured + * after calling linux. + */ + + arch_detect_cpu(); + arch_decomp_wdog_start(); +} + + +#endif /* __ASM_PLAT_UNCOMPRESS_H */ diff --git a/arch/arm/plat-s3c24xx/clock.c b/arch/arm/plat-s3c24xx/clock.c index 80fb82f2616d..f333b64512b3 100644 --- a/arch/arm/plat-s3c24xx/clock.c +++ b/arch/arm/plat-s3c24xx/clock.c @@ -47,7 +47,7 @@ #include #include -#include +#include #include /* clock information */ diff --git a/arch/arm/plat-s3c24xx/common-smdk.c b/arch/arm/plat-s3c24xx/common-smdk.c index 32490fa97b40..ebdf6cd832a4 100644 --- a/arch/arm/plat-s3c24xx/common-smdk.c +++ b/arch/arm/plat-s3c24xx/common-smdk.c @@ -40,7 +40,7 @@ #include -#include +#include #include #include diff --git a/arch/arm/plat-s3c24xx/cpu.c b/arch/arm/plat-s3c24xx/cpu.c index abddadd69119..51aea671075f 100644 --- a/arch/arm/plat-s3c24xx/cpu.c +++ b/arch/arm/plat-s3c24xx/cpu.c @@ -46,10 +46,10 @@ #include #include -#include +#include #include #include -#include +#include #include "s3c244x.h" #include #include diff --git a/arch/arm/plat-s3c24xx/dma.c b/arch/arm/plat-s3c24xx/dma.c index 08c2aaf14c41..390ff9f478bf 100644 --- a/arch/arm/plat-s3c24xx/dma.c +++ b/arch/arm/plat-s3c24xx/dma.c @@ -36,7 +36,7 @@ #include #include -#include +#include /* io map for dma */ static void __iomem *dma_base; diff --git a/arch/arm/plat-s3c24xx/include/plat/clock.h b/arch/arm/plat-s3c24xx/include/plat/clock.h new file mode 100644 index 000000000000..235b753cd877 --- /dev/null +++ b/arch/arm/plat-s3c24xx/include/plat/clock.h @@ -0,0 +1,64 @@ +/* linux/include/asm-arm/plat-s3c24xx/clock.h + * linux/arch/arm/mach-s3c2410/clock.h + * + * Copyright (c) 2004-2005 Simtec Electronics + * http://www.simtec.co.uk/products/SWLINUX/ + * Written by Ben Dooks, + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +struct clk { + struct list_head list; + struct module *owner; + struct clk *parent; + const char *name; + int id; + int usage; + unsigned long rate; + unsigned long ctrlbit; + + int (*enable)(struct clk *, int enable); + int (*set_rate)(struct clk *c, unsigned long rate); + unsigned long (*get_rate)(struct clk *c); + unsigned long (*round_rate)(struct clk *c, unsigned long rate); + int (*set_parent)(struct clk *c, struct clk *parent); +}; + +/* other clocks which may be registered by board support */ + +extern struct clk s3c24xx_dclk0; +extern struct clk s3c24xx_dclk1; +extern struct clk s3c24xx_clkout0; +extern struct clk s3c24xx_clkout1; +extern struct clk s3c24xx_uclk; + +extern struct clk clk_usb_bus; + +/* core clock support */ + +extern struct clk clk_f; +extern struct clk clk_h; +extern struct clk clk_p; +extern struct clk clk_mpll; +extern struct clk clk_upll; +extern struct clk clk_xtal; + +/* exports for arch/arm/mach-s3c2410 + * + * Please DO NOT use these outside of arch/arm/mach-s3c2410 +*/ + +extern struct mutex clocks_mutex; + +extern int s3c2410_clkcon_enable(struct clk *clk, int enable); + +extern int s3c24xx_register_clock(struct clk *clk); +extern int s3c24xx_register_clocks(struct clk **clk, int nr_clks); + +extern int s3c24xx_setup_clocks(unsigned long xtal, + unsigned long fclk, + unsigned long hclk, + unsigned long pclk); diff --git a/arch/arm/plat-s3c24xx/include/plat/common-smdk.h b/arch/arm/plat-s3c24xx/include/plat/common-smdk.h new file mode 100644 index 000000000000..58d9094c935c --- /dev/null +++ b/arch/arm/plat-s3c24xx/include/plat/common-smdk.h @@ -0,0 +1,15 @@ +/* linux/include/asm-arm/plat-s3c24xx/common-smdk.h + * + * Copyright (c) 2006 Simtec Electronics + * Ben Dooks + * + * Common code for SMDK2410 and SMDK2440 boards + * + * http://www.fluff.org/ben/smdk2440/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +extern void smdk_machine_init(void); diff --git a/arch/arm/plat-s3c24xx/include/plat/dma.h b/arch/arm/plat-s3c24xx/include/plat/dma.h new file mode 100644 index 000000000000..c78efe316fc8 --- /dev/null +++ b/arch/arm/plat-s3c24xx/include/plat/dma.h @@ -0,0 +1,82 @@ +/* linux/include/asm-arm/plat-s3c24xx/dma.h + * + * Copyright (C) 2006 Simtec Electronics + * Ben Dooks + * + * Samsung S3C24XX DMA support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +extern struct sysdev_class dma_sysclass; +extern struct s3c2410_dma_chan s3c2410_chans[S3C2410_DMA_CHANNELS]; + +#define DMA_CH_VALID (1<<31) +#define DMA_CH_NEVER (1<<30) + +struct s3c24xx_dma_addr { + unsigned long from; + unsigned long to; +}; + +/* struct s3c24xx_dma_map + * + * this holds the mapping information for the channel selected + * to be connected to the specified device +*/ + +struct s3c24xx_dma_map { + const char *name; + struct s3c24xx_dma_addr hw_addr; + + unsigned long channels[S3C2410_DMA_CHANNELS]; + unsigned long channels_rx[S3C2410_DMA_CHANNELS]; +}; + +struct s3c24xx_dma_selection { + struct s3c24xx_dma_map *map; + unsigned long map_size; + unsigned long dcon_mask; + + void (*select)(struct s3c2410_dma_chan *chan, + struct s3c24xx_dma_map *map); + + void (*direction)(struct s3c2410_dma_chan *chan, + struct s3c24xx_dma_map *map, + enum s3c2410_dmasrc dir); +}; + +extern int s3c24xx_dma_init_map(struct s3c24xx_dma_selection *sel); + +/* struct s3c24xx_dma_order_ch + * + * channel map for one of the `enum dma_ch` dma channels. the list + * entry contains a set of low-level channel numbers, orred with + * DMA_CH_VALID, which are checked in the order in the array. +*/ + +struct s3c24xx_dma_order_ch { + unsigned int list[S3C2410_DMA_CHANNELS]; /* list of channels */ + unsigned int flags; /* flags */ +}; + +/* struct s3c24xx_dma_order + * + * information provided by either the core or the board to give the + * dma system a hint on how to allocate channels +*/ + +struct s3c24xx_dma_order { + struct s3c24xx_dma_order_ch channels[DMACH_MAX]; +}; + +extern int s3c24xx_dma_order_set(struct s3c24xx_dma_order *map); + +/* DMA init code, called from the cpu support code */ + +extern int s3c2410_dma_init(void); + +extern int s3c24xx_dma_init(unsigned int channels, unsigned int irq, + unsigned int stride); diff --git a/arch/arm/plat-s3c24xx/include/plat/s3c2412.h b/arch/arm/plat-s3c24xx/include/plat/s3c2412.h new file mode 100644 index 000000000000..3ec97685e781 --- /dev/null +++ b/arch/arm/plat-s3c24xx/include/plat/s3c2412.h @@ -0,0 +1,29 @@ +/* linux/include/asm-arm/plat-s3c24xx/s3c2412.h + * + * Copyright (c) 2006 Simtec Electronics + * Ben Dooks + * + * Header file for s3c2412 cpu support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifdef CONFIG_CPU_S3C2412 + +extern int s3c2412_init(void); + +extern void s3c2412_map_io(struct map_desc *mach_desc, int size); + +extern void s3c2412_init_uarts(struct s3c2410_uartcfg *cfg, int no); + +extern void s3c2412_init_clocks(int xtal); + +extern int s3c2412_baseclk_add(void); +#else +#define s3c2412_init_clocks NULL +#define s3c2412_init_uarts NULL +#define s3c2412_map_io NULL +#define s3c2412_init NULL +#endif diff --git a/arch/arm/plat-s3c24xx/pwm-clock.c b/arch/arm/plat-s3c24xx/pwm-clock.c index 245270b7d5b7..b8e854f1b1d5 100644 --- a/arch/arm/plat-s3c24xx/pwm-clock.c +++ b/arch/arm/plat-s3c24xx/pwm-clock.c @@ -24,7 +24,7 @@ #include #include -#include +#include #include #include diff --git a/arch/arm/plat-s3c24xx/s3c244x-clock.c b/arch/arm/plat-s3c24xx/s3c244x-clock.c index 2a8d7ca428b5..b998ee624471 100644 --- a/arch/arm/plat-s3c24xx/s3c244x-clock.c +++ b/arch/arm/plat-s3c24xx/s3c244x-clock.c @@ -41,7 +41,7 @@ #include -#include +#include #include static int s3c2440_setparent_armclk(struct clk *clk, struct clk *parent) diff --git a/arch/arm/plat-s3c24xx/s3c244x.c b/arch/arm/plat-s3c24xx/s3c244x.c index 793e0cae2c77..e94721fad411 100644 --- a/arch/arm/plat-s3c24xx/s3c244x.c +++ b/arch/arm/plat-s3c24xx/s3c244x.c @@ -38,7 +38,7 @@ #include #include #include "s3c244x.h" -#include +#include #include #include #include diff --git a/arch/arm/plat-s3c24xx/time.c b/arch/arm/plat-s3c24xx/time.c index 71c65c93dab0..0bba4bf25a95 100644 --- a/arch/arm/plat-s3c24xx/time.c +++ b/arch/arm/plat-s3c24xx/time.c @@ -37,7 +37,7 @@ #include #include -#include +#include #include static unsigned long timer_startval; diff --git a/include/asm-arm/plat-s3c/map.h b/include/asm-arm/plat-s3c/map.h deleted file mode 100644 index b84289d32a54..000000000000 --- a/include/asm-arm/plat-s3c/map.h +++ /dev/null @@ -1,40 +0,0 @@ -/* linux/include/asm-arm/plat-s3c/map.h - * - * Copyright 2003, 2007 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * Ben Dooks - * - * S3C - Memory map definitions (virtual addresses) - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_PLAT_MAP_H -#define __ASM_PLAT_MAP_H __FILE__ - -/* Fit all our registers in at 0xF4000000 upwards, trying to use as - * little of the VA space as possible so vmalloc and friends have a - * better chance of getting memory. - * - * we try to ensure stuff like the IRQ registers are available for - * an single MOVS instruction (ie, only 8 bits of set data) - */ - -#define S3C_ADDR_BASE (0xF4000000) - -#ifndef __ASSEMBLY__ -#define S3C_ADDR(x) ((void __iomem __force *)S3C_ADDR_BASE + (x)) -#else -#define S3C_ADDR(x) (S3C_ADDR_BASE + (x)) -#endif - -#define S3C_VA_IRQ S3C_ADDR(0x00000000) /* irq controller(s) */ -#define S3C_VA_SYS S3C_ADDR(0x00100000) /* system control */ -#define S3C_VA_MEM S3C_ADDR(0x00200000) /* system control */ -#define S3C_VA_TIMER S3C_ADDR(0x00300000) /* timer block */ -#define S3C_VA_WATCHDOG S3C_ADDR(0x00400000) /* watchdog */ -#define S3C_VA_UART S3C_ADDR(0x01000000) /* UART */ - -#endif /* __ASM_PLAT_MAP_H */ diff --git a/include/asm-arm/plat-s3c/regs-adc.h b/include/asm-arm/plat-s3c/regs-adc.h deleted file mode 100644 index 4323cccc86cd..000000000000 --- a/include/asm-arm/plat-s3c/regs-adc.h +++ /dev/null @@ -1,60 +0,0 @@ -/* arch/arm/mach-s3c2410/include/mach/regs-adc.h - * - * Copyright (c) 2004 Shannon Holland - * - * This program is free software; yosu can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * S3C2410 ADC registers -*/ - -#ifndef __ASM_ARCH_REGS_ADC_H -#define __ASM_ARCH_REGS_ADC_H "regs-adc.h" - -#define S3C2410_ADCREG(x) (x) - -#define S3C2410_ADCCON S3C2410_ADCREG(0x00) -#define S3C2410_ADCTSC S3C2410_ADCREG(0x04) -#define S3C2410_ADCDLY S3C2410_ADCREG(0x08) -#define S3C2410_ADCDAT0 S3C2410_ADCREG(0x0C) -#define S3C2410_ADCDAT1 S3C2410_ADCREG(0x10) - - -/* ADCCON Register Bits */ -#define S3C2410_ADCCON_ECFLG (1<<15) -#define S3C2410_ADCCON_PRSCEN (1<<14) -#define S3C2410_ADCCON_PRSCVL(x) (((x)&0xFF)<<6) -#define S3C2410_ADCCON_PRSCVLMASK (0xFF<<6) -#define S3C2410_ADCCON_SELMUX(x) (((x)&0x7)<<3) -#define S3C2410_ADCCON_MUXMASK (0x7<<3) -#define S3C2410_ADCCON_STDBM (1<<2) -#define S3C2410_ADCCON_READ_START (1<<1) -#define S3C2410_ADCCON_ENABLE_START (1<<0) -#define S3C2410_ADCCON_STARTMASK (0x3<<0) - - -/* ADCTSC Register Bits */ -#define S3C2410_ADCTSC_YM_SEN (1<<7) -#define S3C2410_ADCTSC_YP_SEN (1<<6) -#define S3C2410_ADCTSC_XM_SEN (1<<5) -#define S3C2410_ADCTSC_XP_SEN (1<<4) -#define S3C2410_ADCTSC_PULL_UP_DISABLE (1<<3) -#define S3C2410_ADCTSC_AUTO_PST (1<<2) -#define S3C2410_ADCTSC_XY_PST(x) (((x)&0x3)<<0) - -/* ADCDAT0 Bits */ -#define S3C2410_ADCDAT0_UPDOWN (1<<15) -#define S3C2410_ADCDAT0_AUTO_PST (1<<14) -#define S3C2410_ADCDAT0_XY_PST (0x3<<12) -#define S3C2410_ADCDAT0_XPDATA_MASK (0x03FF) - -/* ADCDAT1 Bits */ -#define S3C2410_ADCDAT1_UPDOWN (1<<15) -#define S3C2410_ADCDAT1_AUTO_PST (1<<14) -#define S3C2410_ADCDAT1_XY_PST (0x3<<12) -#define S3C2410_ADCDAT1_YPDATA_MASK (0x03FF) - -#endif /* __ASM_ARCH_REGS_ADC_H */ - - diff --git a/include/asm-arm/plat-s3c/uncompress.h b/include/asm-arm/plat-s3c/uncompress.h deleted file mode 100644 index 4df006b9cc10..000000000000 --- a/include/asm-arm/plat-s3c/uncompress.h +++ /dev/null @@ -1,155 +0,0 @@ -/* linux/include/asm-arm/plat-s3c/uncompress.h - * - * Copyright 2003, 2007 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * Ben Dooks - * - * S3C - uncompress code - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_PLAT_UNCOMPRESS_H -#define __ASM_PLAT_UNCOMPRESS_H - -typedef unsigned int upf_t; /* cannot include linux/serial_core.h */ - -/* uart setup */ - -static unsigned int fifo_mask; -static unsigned int fifo_max; - -/* forward declerations */ - -static void arch_detect_cpu(void); - -/* defines for UART registers */ - -#include -#include - -/* working in physical space... */ -#undef S3C2410_WDOGREG -#define S3C2410_WDOGREG(x) ((S3C24XX_PA_WATCHDOG + (x))) - -/* how many bytes we allow into the FIFO at a time in FIFO mode */ -#define FIFO_MAX (14) - -#define uart_base S3C24XX_PA_UART + (0x4000*CONFIG_S3C_LOWLEVEL_UART_PORT) - -static __inline__ void -uart_wr(unsigned int reg, unsigned int val) -{ - volatile unsigned int *ptr; - - ptr = (volatile unsigned int *)(reg + uart_base); - *ptr = val; -} - -static __inline__ unsigned int -uart_rd(unsigned int reg) -{ - volatile unsigned int *ptr; - - ptr = (volatile unsigned int *)(reg + uart_base); - return *ptr; -} - -/* we can deal with the case the UARTs are being run - * in FIFO mode, so that we don't hold up our execution - * waiting for tx to happen... -*/ - -static void putc(int ch) -{ - if (uart_rd(S3C2410_UFCON) & S3C2410_UFCON_FIFOMODE) { - int level; - - while (1) { - level = uart_rd(S3C2410_UFSTAT); - level &= fifo_mask; - - if (level < fifo_max) - break; - } - - } else { - /* not using fifos */ - - while ((uart_rd(S3C2410_UTRSTAT) & S3C2410_UTRSTAT_TXE) != S3C2410_UTRSTAT_TXE) - barrier(); - } - - /* write byte to transmission register */ - uart_wr(S3C2410_UTXH, ch); -} - -static inline void flush(void) -{ -} - -#define __raw_writel(d,ad) do { *((volatile unsigned int *)(ad)) = (d); } while(0) - -/* CONFIG_S3C_BOOT_WATCHDOG - * - * Simple boot-time watchdog setup, to reboot the system if there is - * any problem with the boot process -*/ - -#ifdef CONFIG_S3C_BOOT_WATCHDOG - -#define WDOG_COUNT (0xff00) - -static inline void arch_decomp_wdog(void) -{ - __raw_writel(WDOG_COUNT, S3C2410_WTCNT); -} - -static void arch_decomp_wdog_start(void) -{ - __raw_writel(WDOG_COUNT, S3C2410_WTDAT); - __raw_writel(WDOG_COUNT, S3C2410_WTCNT); - __raw_writel(S3C2410_WTCON_ENABLE | S3C2410_WTCON_DIV128 | S3C2410_WTCON_RSTEN | S3C2410_WTCON_PRESCALE(0x80), S3C2410_WTCON); -} - -#else -#define arch_decomp_wdog_start() -#define arch_decomp_wdog() -#endif - -#ifdef CONFIG_S3C_BOOT_ERROR_RESET - -static void arch_decomp_error(const char *x) -{ - putstr("\n\n"); - putstr(x); - putstr("\n\n -- System resetting\n"); - - __raw_writel(0x4000, S3C2410_WTDAT); - __raw_writel(0x4000, S3C2410_WTCNT); - __raw_writel(S3C2410_WTCON_ENABLE | S3C2410_WTCON_DIV128 | S3C2410_WTCON_RSTEN | S3C2410_WTCON_PRESCALE(0x40), S3C2410_WTCON); - - while(1); -} - -#define arch_error arch_decomp_error -#endif - -static void error(char *err); - -static void -arch_decomp_setup(void) -{ - /* we may need to setup the uart(s) here if we are not running - * on an BAST... the BAST will have left the uarts configured - * after calling linux. - */ - - arch_detect_cpu(); - arch_decomp_wdog_start(); -} - - -#endif /* __ASM_PLAT_UNCOMPRESS_H */ diff --git a/include/asm-arm/plat-s3c24xx/clock.h b/include/asm-arm/plat-s3c24xx/clock.h deleted file mode 100644 index 235b753cd877..000000000000 --- a/include/asm-arm/plat-s3c24xx/clock.h +++ /dev/null @@ -1,64 +0,0 @@ -/* linux/include/asm-arm/plat-s3c24xx/clock.h - * linux/arch/arm/mach-s3c2410/clock.h - * - * Copyright (c) 2004-2005 Simtec Electronics - * http://www.simtec.co.uk/products/SWLINUX/ - * Written by Ben Dooks, - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -struct clk { - struct list_head list; - struct module *owner; - struct clk *parent; - const char *name; - int id; - int usage; - unsigned long rate; - unsigned long ctrlbit; - - int (*enable)(struct clk *, int enable); - int (*set_rate)(struct clk *c, unsigned long rate); - unsigned long (*get_rate)(struct clk *c); - unsigned long (*round_rate)(struct clk *c, unsigned long rate); - int (*set_parent)(struct clk *c, struct clk *parent); -}; - -/* other clocks which may be registered by board support */ - -extern struct clk s3c24xx_dclk0; -extern struct clk s3c24xx_dclk1; -extern struct clk s3c24xx_clkout0; -extern struct clk s3c24xx_clkout1; -extern struct clk s3c24xx_uclk; - -extern struct clk clk_usb_bus; - -/* core clock support */ - -extern struct clk clk_f; -extern struct clk clk_h; -extern struct clk clk_p; -extern struct clk clk_mpll; -extern struct clk clk_upll; -extern struct clk clk_xtal; - -/* exports for arch/arm/mach-s3c2410 - * - * Please DO NOT use these outside of arch/arm/mach-s3c2410 -*/ - -extern struct mutex clocks_mutex; - -extern int s3c2410_clkcon_enable(struct clk *clk, int enable); - -extern int s3c24xx_register_clock(struct clk *clk); -extern int s3c24xx_register_clocks(struct clk **clk, int nr_clks); - -extern int s3c24xx_setup_clocks(unsigned long xtal, - unsigned long fclk, - unsigned long hclk, - unsigned long pclk); diff --git a/include/asm-arm/plat-s3c24xx/common-smdk.h b/include/asm-arm/plat-s3c24xx/common-smdk.h deleted file mode 100644 index 58d9094c935c..000000000000 --- a/include/asm-arm/plat-s3c24xx/common-smdk.h +++ /dev/null @@ -1,15 +0,0 @@ -/* linux/include/asm-arm/plat-s3c24xx/common-smdk.h - * - * Copyright (c) 2006 Simtec Electronics - * Ben Dooks - * - * Common code for SMDK2410 and SMDK2440 boards - * - * http://www.fluff.org/ben/smdk2440/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -extern void smdk_machine_init(void); diff --git a/include/asm-arm/plat-s3c24xx/dma.h b/include/asm-arm/plat-s3c24xx/dma.h deleted file mode 100644 index c78efe316fc8..000000000000 --- a/include/asm-arm/plat-s3c24xx/dma.h +++ /dev/null @@ -1,82 +0,0 @@ -/* linux/include/asm-arm/plat-s3c24xx/dma.h - * - * Copyright (C) 2006 Simtec Electronics - * Ben Dooks - * - * Samsung S3C24XX DMA support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -extern struct sysdev_class dma_sysclass; -extern struct s3c2410_dma_chan s3c2410_chans[S3C2410_DMA_CHANNELS]; - -#define DMA_CH_VALID (1<<31) -#define DMA_CH_NEVER (1<<30) - -struct s3c24xx_dma_addr { - unsigned long from; - unsigned long to; -}; - -/* struct s3c24xx_dma_map - * - * this holds the mapping information for the channel selected - * to be connected to the specified device -*/ - -struct s3c24xx_dma_map { - const char *name; - struct s3c24xx_dma_addr hw_addr; - - unsigned long channels[S3C2410_DMA_CHANNELS]; - unsigned long channels_rx[S3C2410_DMA_CHANNELS]; -}; - -struct s3c24xx_dma_selection { - struct s3c24xx_dma_map *map; - unsigned long map_size; - unsigned long dcon_mask; - - void (*select)(struct s3c2410_dma_chan *chan, - struct s3c24xx_dma_map *map); - - void (*direction)(struct s3c2410_dma_chan *chan, - struct s3c24xx_dma_map *map, - enum s3c2410_dmasrc dir); -}; - -extern int s3c24xx_dma_init_map(struct s3c24xx_dma_selection *sel); - -/* struct s3c24xx_dma_order_ch - * - * channel map for one of the `enum dma_ch` dma channels. the list - * entry contains a set of low-level channel numbers, orred with - * DMA_CH_VALID, which are checked in the order in the array. -*/ - -struct s3c24xx_dma_order_ch { - unsigned int list[S3C2410_DMA_CHANNELS]; /* list of channels */ - unsigned int flags; /* flags */ -}; - -/* struct s3c24xx_dma_order - * - * information provided by either the core or the board to give the - * dma system a hint on how to allocate channels -*/ - -struct s3c24xx_dma_order { - struct s3c24xx_dma_order_ch channels[DMACH_MAX]; -}; - -extern int s3c24xx_dma_order_set(struct s3c24xx_dma_order *map); - -/* DMA init code, called from the cpu support code */ - -extern int s3c2410_dma_init(void); - -extern int s3c24xx_dma_init(unsigned int channels, unsigned int irq, - unsigned int stride); diff --git a/include/asm-arm/plat-s3c24xx/s3c2412.h b/include/asm-arm/plat-s3c24xx/s3c2412.h deleted file mode 100644 index 3ec97685e781..000000000000 --- a/include/asm-arm/plat-s3c24xx/s3c2412.h +++ /dev/null @@ -1,29 +0,0 @@ -/* linux/include/asm-arm/plat-s3c24xx/s3c2412.h - * - * Copyright (c) 2006 Simtec Electronics - * Ben Dooks - * - * Header file for s3c2412 cpu support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifdef CONFIG_CPU_S3C2412 - -extern int s3c2412_init(void); - -extern void s3c2412_map_io(struct map_desc *mach_desc, int size); - -extern void s3c2412_init_uarts(struct s3c2410_uartcfg *cfg, int no); - -extern void s3c2412_init_clocks(int xtal); - -extern int s3c2412_baseclk_add(void); -#else -#define s3c2412_init_clocks NULL -#define s3c2412_init_uarts NULL -#define s3c2412_map_io NULL -#define s3c2412_init NULL -#endif -- cgit v1.2.3