From a365e668e89d50230737ec20d43fe8fe18412730 Mon Sep 17 00:00:00 2001
From: Raja Mani <rmani@qti.qualcomm.com>
Date: Wed, 13 Jan 2016 11:26:44 +0530
Subject: dt: bindings: add bindings for ipq4019 wifi block

Add device tree binding documentation details for wifi block present
in Qualcomm IPQ4019 SoC into "qcom,ath10k.txt".

Right now, ath10k wireless driver has support for PCI based wlan devices.
There is a plan to extend ath10k driver to support wifi devices which are
connected over AHB as well (enumeration will happen via device tree node).
For AHB based devices (ie, ipq4019), all wifi properties are supplied via
device tree (including irq, reg addr, cal data,etc).

Signed-off-by: Raja Mani <rmani@qti.qualcomm.com>
Acked-by: Rob Herring <robh@kernel.org>
[kvalo@qca.qualcomm.com: fixed typos noticed by Rob]
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 .../bindings/net/wireless/qcom,ath10k.txt          | 89 ++++++++++++++++++++--
 1 file changed, 84 insertions(+), 5 deletions(-)

diff --git a/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt b/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt
index edefc26c6204..96aae6b4f736 100644
--- a/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt
+++ b/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt
@@ -1,17 +1,46 @@
 * Qualcomm Atheros ath10k wireless devices
 
-For ath10k devices the calibration data can be provided through Device
-Tree. The node is a child node of the PCI controller.
-
 Required properties:
--compatible : Should be "qcom,ath10k"
+- compatible: Should be one of the following:
+	* "qcom,ath10k"
+	* "qcom,ipq4019-wifi"
+
+PCI based devices uses compatible string "qcom,ath10k" and takes only
+calibration data via "qcom,ath10k-calibration-data". Rest of the properties
+are not applicable for PCI based devices.
+
+AHB based devices (i.e. ipq4019) uses compatible string "qcom,ipq4019-wifi"
+and also uses most of the properties defined in this doc.
 
 Optional properties:
+- reg: Address and length of the register set for the device.
+- resets: Must contain an entry for each entry in reset-names.
+          See ../reset/reseti.txt for details.
+- reset-names: Must include the list of following reset names,
+	       "wifi_cpu_init"
+	       "wifi_radio_srif"
+	       "wifi_radio_warm"
+	       "wifi_radio_cold"
+	       "wifi_core_warm"
+	       "wifi_core_cold"
+- clocks: List of clock specifiers, must contain an entry for each required
+          entry in clock-names.
+- clock-names: Should contain the clock names "wifi_wcss_cmd", "wifi_wcss_ref",
+               "wifi_wcss_rtc".
+- interrupts: List of interrupt lines. Must contain an entry
+	      for each entry in the interrupt-names property.
+- interrupt-names: Must include the entries for MSI interrupt
+		   names ("msi0" to "msi15") and legacy interrupt
+		   name ("legacy"),
+- qcom,msi_addr: MSI interrupt address.
+- qcom,msi_base: Base value to add before writing MSI data into
+		MSI address register.
 - qcom,ath10k-calibration-data : calibration data as an array, the
 				 length can vary between hw versions
 
+Example (to supply the calibration data alone):
 
-Example:
+In this example, the node is defined as child node of the PCI controller.
 
 pci {
 	pcie@0 {
@@ -28,3 +57,53 @@ pci {
 		};
 	};
 };
+
+Example (to supply ipq4019 SoC wifi block details):
+
+wifi0: wifi@a000000 {
+	compatible = "qcom,ipq4019-wifi";
+	reg = <0xa000000 0x200000>;
+	resets = <&gcc WIFI0_CPU_INIT_RESET>,
+		 <&gcc WIFI0_RADIO_SRIF_RESET>,
+		 <&gcc WIFI0_RADIO_WARM_RESET>,
+		 <&gcc WIFI0_RADIO_COLD_RESET>,
+		 <&gcc WIFI0_CORE_WARM_RESET>,
+		 <&gcc WIFI0_CORE_COLD_RESET>;
+	reset-names = "wifi_cpu_init",
+		      "wifi_radio_srif",
+		      "wifi_radio_warm",
+		      "wifi_radio_cold",
+		      "wifi_core_warm",
+		      "wifi_core_cold";
+	clocks = <&gcc GCC_WCSS2G_CLK>,
+		 <&gcc GCC_WCSS2G_REF_CLK>,
+		 <&gcc GCC_WCSS2G_RTC_CLK>;
+	clock-names = "wifi_wcss_cmd",
+		      "wifi_wcss_ref",
+		      "wifi_wcss_rtc";
+	interrupts = <0 0x20 0x1>,
+		     <0 0x21 0x1>,
+		     <0 0x22 0x1>,
+		     <0 0x23 0x1>,
+		     <0 0x24 0x1>,
+		     <0 0x25 0x1>,
+		     <0 0x26 0x1>,
+		     <0 0x27 0x1>,
+		     <0 0x28 0x1>,
+		     <0 0x29 0x1>,
+		     <0 0x2a 0x1>,
+		     <0 0x2b 0x1>,
+		     <0 0x2c 0x1>,
+		     <0 0x2d 0x1>,
+		     <0 0x2e 0x1>,
+		     <0 0x2f 0x1>,
+		     <0 0xa8 0x0>;
+	interrupt-names = "msi0",  "msi1",  "msi2",  "msi3",
+			  "msi4",  "msi5",  "msi6",  "msi7",
+			  "msi8",  "msi9",  "msi10", "msi11",
+			  "msi12", "msi13", "msi14", "msi15",
+			  "legacy";
+	qcom,msi_addr = <0x0b006040>;
+	qcom,msi_base = <0x40>;
+	qcom,ath10k-calibration-data = [ 01 02 03 ... ];
+};
-- 
cgit v1.2.3


From d742c969b3ad9c83ac57579dfd56c90dd437db37 Mon Sep 17 00:00:00 2001
From: Michal Kazior <michal.kazior@tieto.com>
Date: Wed, 13 Jan 2016 14:52:52 +0100
Subject: ath10k: prevent txrx running for too long

On multicore systems it was possible for the txrx
tasklet to keep on running for long periods of
time on a single CPU due to tx completion
processing. Another CPU could feed the running
tasklet for an indefinite amount of time.

The tasklet is now guaranteed to run a finite
amount of time and is limited by HTT CE Rx ring
depth.

This improves behavior when RPS is used on target
system and might improve TCP handling as well.

Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/htt_rx.c | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/ath/ath10k/htt_rx.c b/drivers/net/wireless/ath/ath10k/htt_rx.c
index 91afa3ae414c..3079434b5d9b 100644
--- a/drivers/net/wireless/ath/ath10k/htt_rx.c
+++ b/drivers/net/wireless/ath/ath10k/htt_rx.c
@@ -2156,10 +2156,18 @@ static void ath10k_htt_txrx_compl_task(unsigned long ptr)
 {
 	struct ath10k_htt *htt = (struct ath10k_htt *)ptr;
 	struct ath10k *ar = htt->ar;
+	struct sk_buff_head tx_q;
 	struct htt_resp *resp;
 	struct sk_buff *skb;
+	unsigned long flags;
 
-	while ((skb = skb_dequeue(&htt->tx_compl_q))) {
+	__skb_queue_head_init(&tx_q);
+
+	spin_lock_irqsave(&htt->tx_compl_q.lock, flags);
+	skb_queue_splice_init(&htt->tx_compl_q, &tx_q);
+	spin_unlock_irqrestore(&htt->tx_compl_q.lock, flags);
+
+	while ((skb = __skb_dequeue(&tx_q))) {
 		ath10k_htt_rx_frm_tx_compl(htt->ar, skb);
 		dev_kfree_skb_any(skb);
 	}
-- 
cgit v1.2.3


From de46c015c9b703bb8abb91856ed45e3639c7e7d2 Mon Sep 17 00:00:00 2001
From: Mohammed Shafi Shajakhan <mohammed@qti.qualcomm.com>
Date: Wed, 13 Jan 2016 21:16:28 +0530
Subject: ath10k: add support for parsing per STA rx_duration for 10.2.4

Add support for parsing 'peer_rx_duration' as part
of 10.2.4 peer_stats. Also register PEER_STATS service
for parsing 'rx_duration' (and for any new fields to be added
as part of peer_stats). Have checks for backward compatibility with
older 10.2.4 firmware incase PEER_STATS service is not enabled

Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qti.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/core.h |  1 +
 drivers/net/wireless/ath/ath10k/wmi.c  | 22 ++++++++++++++++++++--
 drivers/net/wireless/ath/ath10k/wmi.h  | 12 ++++++++++++
 3 files changed, 33 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/ath/ath10k/core.h b/drivers/net/wireless/ath/ath10k/core.h
index 7840cf3ef7a6..d47a08568bdc 100644
--- a/drivers/net/wireless/ath/ath10k/core.h
+++ b/drivers/net/wireless/ath/ath10k/core.h
@@ -159,6 +159,7 @@ struct ath10k_fw_stats_peer {
 	u32 peer_rssi;
 	u32 peer_tx_rate;
 	u32 peer_rx_rate; /* 10x only */
+	u32 rx_duration;
 };
 
 struct ath10k_fw_stats_vdev {
diff --git a/drivers/net/wireless/ath/ath10k/wmi.c b/drivers/net/wireless/ath/ath10k/wmi.c
index a7c3d299639b..c610d1761940 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.c
+++ b/drivers/net/wireless/ath/ath10k/wmi.c
@@ -2862,11 +2862,20 @@ static int ath10k_wmi_10_2_4_op_pull_fw_stats(struct ath10k *ar,
 	/* fw doesn't implement vdev stats */
 
 	for (i = 0; i < num_peer_stats; i++) {
-		const struct wmi_10_2_4_peer_stats *src;
+		const struct wmi_10_2_4_ext_peer_stats *src;
 		struct ath10k_fw_stats_peer *dst;
+		int stats_len;
+		bool ext_peer_stats_support;
+
+		ext_peer_stats_support = test_bit(WMI_SERVICE_PEER_STATS,
+						  ar->wmi.svc_map);
+		if (ext_peer_stats_support)
+			stats_len = sizeof(struct wmi_10_2_4_ext_peer_stats);
+		else
+			stats_len = sizeof(struct wmi_10_2_4_peer_stats);
 
 		src = (void *)skb->data;
-		if (!skb_pull(skb, sizeof(*src)))
+		if (!skb_pull(skb, stats_len))
 			return -EPROTO;
 
 		dst = kzalloc(sizeof(*dst), GFP_ATOMIC);
@@ -2876,6 +2885,9 @@ static int ath10k_wmi_10_2_4_op_pull_fw_stats(struct ath10k *ar,
 		ath10k_wmi_pull_peer_stats(&src->common.old, dst);
 
 		dst->peer_rx_rate = __le32_to_cpu(src->common.peer_rx_rate);
+
+		if (ext_peer_stats_support)
+			dst->rx_duration = __le32_to_cpu(src->rx_duration);
 		/* FIXME: expose 10.2 specific values */
 
 		list_add_tail(&dst->list, &stats->peers);
@@ -5517,6 +5529,9 @@ static struct sk_buff *ath10k_wmi_10_2_op_gen_init(struct ath10k *ar)
 	    test_bit(WMI_SERVICE_COEX_GPIO, ar->wmi.svc_map))
 		features |= WMI_10_2_COEX_GPIO;
 
+	if (test_bit(WMI_SERVICE_PEER_STATS, ar->wmi.svc_map))
+		features |= WMI_10_2_PEER_STATS;
+
 	cmd->resource_config.feature_mask = __cpu_to_le32(features);
 
 	memcpy(&cmd->resource_config.common, &config, sizeof(config));
@@ -7126,6 +7141,9 @@ ath10k_wmi_fw_peer_stats_fill(const struct ath10k_fw_stats_peer *peer,
 			"Peer TX rate", peer->peer_tx_rate);
 	len += scnprintf(buf + len, buf_len - len, "%30s %u\n",
 			"Peer RX rate", peer->peer_rx_rate);
+	len += scnprintf(buf + len, buf_len - len, "%30s %u\n",
+			"Peer RX duration", peer->rx_duration);
+
 	len += scnprintf(buf + len, buf_len - len, "\n");
 	*length = len;
 }
diff --git a/drivers/net/wireless/ath/ath10k/wmi.h b/drivers/net/wireless/ath/ath10k/wmi.h
index d85ad7855d20..e1bb02ba207d 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.h
+++ b/drivers/net/wireless/ath/ath10k/wmi.h
@@ -177,6 +177,7 @@ enum wmi_service {
 	WMI_SERVICE_BSS_CHANNEL_INFO_64,
 	WMI_SERVICE_EXT_RES_CFG_SUPPORT,
 	WMI_SERVICE_MESH,
+	WMI_SERVICE_PEER_STATS,
 
 	/* keep last */
 	WMI_SERVICE_MAX,
@@ -213,6 +214,7 @@ enum wmi_10x_service {
 	WMI_10X_SERVICE_BSS_CHANNEL_INFO_64,
 	WMI_10X_SERVICE_MESH,
 	WMI_10X_SERVICE_EXT_RES_CFG_SUPPORT,
+	WMI_10X_SERVICE_PEER_STATS,
 };
 
 enum wmi_main_service {
@@ -386,6 +388,7 @@ static inline char *wmi_service_name(int service_id)
 	SVCSTR(WMI_SERVICE_BSS_CHANNEL_INFO_64);
 	SVCSTR(WMI_SERVICE_EXT_RES_CFG_SUPPORT);
 	SVCSTR(WMI_SERVICE_MESH);
+	SVCSTR(WMI_SERVICE_PEER_STATS);
 	default:
 		return NULL;
 	}
@@ -463,6 +466,8 @@ static inline void wmi_10x_svc_map(const __le32 *in, unsigned long *out,
 	       WMI_SERVICE_MESH, len);
 	SVCMAP(WMI_10X_SERVICE_EXT_RES_CFG_SUPPORT,
 	       WMI_SERVICE_EXT_RES_CFG_SUPPORT, len);
+	SVCMAP(WMI_10X_SERVICE_PEER_STATS,
+	       WMI_SERVICE_PEER_STATS, len);
 }
 
 static inline void wmi_main_svc_map(const __le32 *in, unsigned long *out,
@@ -2417,6 +2422,7 @@ enum wmi_10_2_feature_mask {
 	WMI_10_2_RX_BATCH_MODE = BIT(0),
 	WMI_10_2_ATF_CONFIG    = BIT(1),
 	WMI_10_2_COEX_GPIO     = BIT(3),
+	WMI_10_2_PEER_STATS    = BIT(7),
 };
 
 struct wmi_resource_config_10_2 {
@@ -4230,6 +4236,12 @@ struct wmi_10_2_4_peer_stats {
 	__le32 unknown_value; /* FIXME: what is this word? */
 } __packed;
 
+struct wmi_10_2_4_ext_peer_stats {
+	struct wmi_10_2_peer_stats common;
+	__le32 peer_rssi_changed;
+	__le32 rx_duration;
+} __packed;
+
 struct wmi_10_4_peer_stats {
 	struct wmi_mac_addr peer_macaddr;
 	__le32 peer_rssi;
-- 
cgit v1.2.3


From 774e656e94cdd8db27a8831abb3d35fbb95d2bc6 Mon Sep 17 00:00:00 2001
From: Mohammed Shafi Shajakhan <mohammed@qti.qualcomm.com>
Date: Wed, 13 Jan 2016 21:16:29 +0530
Subject: ath10k: fix naming Peer stats rssi_changed field in 10.2.4

Fix naming of peer stats rssi_changed field in 10.2.4 to make it
more readable. As of now this field is not used, but necessary to
pull in fw_stats with appropriate length.

Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qti.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/wmi.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/ath/ath10k/wmi.h b/drivers/net/wireless/ath/ath10k/wmi.h
index e1bb02ba207d..187f495c1fbe 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.h
+++ b/drivers/net/wireless/ath/ath10k/wmi.h
@@ -4233,7 +4233,7 @@ struct wmi_10_2_peer_stats {
 
 struct wmi_10_2_4_peer_stats {
 	struct wmi_10_2_peer_stats common;
-	__le32 unknown_value; /* FIXME: what is this word? */
+	__le32 peer_rssi_changed;
 } __packed;
 
 struct wmi_10_2_4_ext_peer_stats {
-- 
cgit v1.2.3


From 1fe374f5b07ed58e485fdbfa7410876e25ce1a78 Mon Sep 17 00:00:00 2001
From: Mohammed Shafi Shajakhan <mohammed@qti.qualcomm.com>
Date: Wed, 13 Jan 2016 21:16:30 +0530
Subject: ath10k: cleanup setting pdev paramaters

Replace the local variable 'burst_enable' with 'param'
for mapping and setting pdev paraemeters and with this patch
pretty easy to extend support for new parameters adhering to
linux kernel coding guidelines

Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qti.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/mac.c | 20 +++++++++++---------
 1 file changed, 11 insertions(+), 9 deletions(-)

diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index 6146a293601a..0d7671c778fd 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -3988,7 +3988,7 @@ static int ath10k_set_antenna(struct ieee80211_hw *hw, u32 tx_ant, u32 rx_ant)
 static int ath10k_start(struct ieee80211_hw *hw)
 {
 	struct ath10k *ar = hw->priv;
-	u32 burst_enable;
+	u32 param;
 	int ret = 0;
 
 	/*
@@ -4031,13 +4031,15 @@ static int ath10k_start(struct ieee80211_hw *hw)
 		goto err_power_down;
 	}
 
-	ret = ath10k_wmi_pdev_set_param(ar, ar->wmi.pdev_param->pmf_qos, 1);
+	param = ar->wmi.pdev_param->pmf_qos;
+	ret = ath10k_wmi_pdev_set_param(ar, param, 1);
 	if (ret) {
 		ath10k_warn(ar, "failed to enable PMF QOS: %d\n", ret);
 		goto err_core_stop;
 	}
 
-	ret = ath10k_wmi_pdev_set_param(ar, ar->wmi.pdev_param->dynamic_bw, 1);
+	param = ar->wmi.pdev_param->dynamic_bw;
+	ret = ath10k_wmi_pdev_set_param(ar, param, 1);
 	if (ret) {
 		ath10k_warn(ar, "failed to enable dynamic BW: %d\n", ret);
 		goto err_core_stop;
@@ -4053,8 +4055,8 @@ static int ath10k_start(struct ieee80211_hw *hw)
 	}
 
 	if (test_bit(WMI_SERVICE_BURST, ar->wmi.svc_map)) {
-		burst_enable = ar->wmi.pdev_param->burst_enable;
-		ret = ath10k_wmi_pdev_set_param(ar, burst_enable, 0);
+		param = ar->wmi.pdev_param->burst_enable;
+		ret = ath10k_wmi_pdev_set_param(ar, param, 0);
 		if (ret) {
 			ath10k_warn(ar, "failed to disable burst: %d\n", ret);
 			goto err_core_stop;
@@ -4072,8 +4074,8 @@ static int ath10k_start(struct ieee80211_hw *hw)
 	 * this problem.
 	 */
 
-	ret = ath10k_wmi_pdev_set_param(ar,
-					ar->wmi.pdev_param->arp_ac_override, 0);
+	param = ar->wmi.pdev_param->arp_ac_override;
+	ret = ath10k_wmi_pdev_set_param(ar, param, 0);
 	if (ret) {
 		ath10k_warn(ar, "failed to set arp ac override parameter: %d\n",
 			    ret);
@@ -4092,8 +4094,8 @@ static int ath10k_start(struct ieee80211_hw *hw)
 		}
 	}
 
-	ret = ath10k_wmi_pdev_set_param(ar,
-					ar->wmi.pdev_param->ani_enable, 1);
+	param = ar->wmi.pdev_param->ani_enable;
+	ret = ath10k_wmi_pdev_set_param(ar, param, 1);
 	if (ret) {
 		ath10k_warn(ar, "failed to enable ani by default: %d\n",
 			    ret);
-- 
cgit v1.2.3


From b4619ea2f72153df42d8ba2894b2af5e621d6df6 Mon Sep 17 00:00:00 2001
From: Mohammed Shafi Shajakhan <mohammed@qti.qualcomm.com>
Date: Wed, 13 Jan 2016 21:16:31 +0530
Subject: ath10k: rename few function names of firmware stats

Prerequisite patch to address checkpatch errors for the next patch
in this series, this function names are bit too long, make it short

Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qti.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/debug.c | 18 +++++++++---------
 1 file changed, 9 insertions(+), 9 deletions(-)

diff --git a/drivers/net/wireless/ath/ath10k/debug.c b/drivers/net/wireless/ath/ath10k/debug.c
index 2bdf5408b0d9..4fb1e0eb3408 100644
--- a/drivers/net/wireless/ath/ath10k/debug.c
+++ b/drivers/net/wireless/ath/ath10k/debug.c
@@ -276,7 +276,7 @@ static const struct file_operations fops_wmi_services = {
 	.llseek = default_llseek,
 };
 
-static void ath10k_debug_fw_stats_pdevs_free(struct list_head *head)
+static void ath10k_fw_stats_pdevs_free(struct list_head *head)
 {
 	struct ath10k_fw_stats_pdev *i, *tmp;
 
@@ -286,7 +286,7 @@ static void ath10k_debug_fw_stats_pdevs_free(struct list_head *head)
 	}
 }
 
-static void ath10k_debug_fw_stats_vdevs_free(struct list_head *head)
+static void ath10k_fw_stats_vdevs_free(struct list_head *head)
 {
 	struct ath10k_fw_stats_vdev *i, *tmp;
 
@@ -296,7 +296,7 @@ static void ath10k_debug_fw_stats_vdevs_free(struct list_head *head)
 	}
 }
 
-static void ath10k_debug_fw_stats_peers_free(struct list_head *head)
+static void ath10k_fw_stats_peers_free(struct list_head *head)
 {
 	struct ath10k_fw_stats_peer *i, *tmp;
 
@@ -310,9 +310,9 @@ static void ath10k_debug_fw_stats_reset(struct ath10k *ar)
 {
 	spin_lock_bh(&ar->data_lock);
 	ar->debug.fw_stats_done = false;
-	ath10k_debug_fw_stats_pdevs_free(&ar->debug.fw_stats.pdevs);
-	ath10k_debug_fw_stats_vdevs_free(&ar->debug.fw_stats.vdevs);
-	ath10k_debug_fw_stats_peers_free(&ar->debug.fw_stats.peers);
+	ath10k_fw_stats_pdevs_free(&ar->debug.fw_stats.pdevs);
+	ath10k_fw_stats_vdevs_free(&ar->debug.fw_stats.vdevs);
+	ath10k_fw_stats_peers_free(&ar->debug.fw_stats.peers);
 	spin_unlock_bh(&ar->data_lock);
 }
 
@@ -391,9 +391,9 @@ free:
 	/* In some cases lists have been spliced and cleared. Free up
 	 * resources if that is not the case.
 	 */
-	ath10k_debug_fw_stats_pdevs_free(&stats.pdevs);
-	ath10k_debug_fw_stats_vdevs_free(&stats.vdevs);
-	ath10k_debug_fw_stats_peers_free(&stats.peers);
+	ath10k_fw_stats_pdevs_free(&stats.pdevs);
+	ath10k_fw_stats_vdevs_free(&stats.vdevs);
+	ath10k_fw_stats_peers_free(&stats.peers);
 
 	spin_unlock_bh(&ar->data_lock);
 }
-- 
cgit v1.2.3


From d57e7f2e7e042a7cef19702abe42f1e9b55d754c Mon Sep 17 00:00:00 2001
From: Mohammed Shafi Shajakhan <mohammed@qti.qualcomm.com>
Date: Wed, 13 Jan 2016 21:16:32 +0530
Subject: ath10k: provision to support periodic peer stats update

Enable support for periodic peer stats update when peer stats
service is enabled. The host to update the peer stats received
from the firmware periodically, since firmware will reset this to zero
after sometime (due to memory constraints)

While enabling periodic peer / vdev stats cleanup the existing
list in debugfs if max limit is reached, so that the new stats is
updated.

Ideally speaking based on 'Michal Kazior's' suggestion
we need to completely move to periodic update of all the stats making
the 'ping - pong' method obselete. This requires a bit of re-work and
some testing as well, also confirmation regarding backward comptability
for various firmware and chipsets. Hence allow periodic update only
for peer_stats.

Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qti.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/debug.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/ath/ath10k/debug.c b/drivers/net/wireless/ath/ath10k/debug.c
index 4fb1e0eb3408..3b8da817972b 100644
--- a/drivers/net/wireless/ath/ath10k/debug.c
+++ b/drivers/net/wireless/ath/ath10k/debug.c
@@ -347,7 +347,8 @@ void ath10k_debug_fw_stats_process(struct ath10k *ar, struct sk_buff *skb)
 	 *     delivered which is treated as end-of-data and is itself discarded
 	 */
 
-	if (ar->debug.fw_stats_done) {
+	if (ar->debug.fw_stats_done &&
+	    !test_bit(WMI_SERVICE_PEER_STATS, ar->wmi.svc_map)) {
 		ath10k_warn(ar, "received unsolicited stats update event\n");
 		goto free;
 	}
@@ -372,11 +373,13 @@ void ath10k_debug_fw_stats_process(struct ath10k *ar, struct sk_buff *skb)
 			/* Although this is unlikely impose a sane limit to
 			 * prevent firmware from DoS-ing the host.
 			 */
+			ath10k_fw_stats_peers_free(&ar->debug.fw_stats.peers);
 			ath10k_warn(ar, "dropping fw peer stats\n");
 			goto free;
 		}
 
 		if (num_vdevs >= BITS_PER_LONG) {
+			ath10k_fw_stats_vdevs_free(&ar->debug.fw_stats.vdevs);
 			ath10k_warn(ar, "dropping fw vdev stats\n");
 			goto free;
 		}
-- 
cgit v1.2.3


From 8351c052194b30f852db6225a568e48ee2a4947b Mon Sep 17 00:00:00 2001
From: Mohammed Shafi Shajakhan <mohammed@qti.qualcomm.com>
Date: Wed, 13 Jan 2016 21:16:33 +0530
Subject: ath10k: enable periodic peer stats update

Register for 500ms as periodic peer stats update period,
and parameters like rx_duration that needs to be tracked
in host can be achieved by this provision, also periodic
stats update is the future of fw_stats and shall be extended
for pdev / vdev stats irrespecitive PEER_STATS service is enabled
or not

Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qti.qualcomm.com>
[kvalo@qca.qualcomm.com: fix a checkpatch warning]
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/mac.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index 0d7671c778fd..ef0438d2cc8f 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -4104,6 +4104,18 @@ static int ath10k_start(struct ieee80211_hw *hw)
 
 	ar->ani_enabled = true;
 
+	if (test_bit(WMI_SERVICE_PEER_STATS, ar->wmi.svc_map)) {
+		param = ar->wmi.pdev_param->peer_stats_update_period;
+		ret = ath10k_wmi_pdev_set_param(ar, param,
+						PEER_DEFAULT_STATS_UPDATE_PERIOD);
+		if (ret) {
+			ath10k_warn(ar,
+				    "failed to set peer stats period : %d\n",
+				    ret);
+			goto err_core_stop;
+		}
+	}
+
 	ar->num_started_vdevs = 0;
 	ath10k_regd_update(ar);
 
-- 
cgit v1.2.3


From 856e7c3084399fb7e029628dbe43dcb9bb7d7b5b Mon Sep 17 00:00:00 2001
From: Mohammed Shafi Shajakhan <mohammed@qti.qualcomm.com>
Date: Wed, 13 Jan 2016 21:16:34 +0530
Subject: ath10k: add debugfs support for Per STA total rx duration

Add debugfs support for per client total rx duration, track this
via the report of Peer stats rx duration reported for every 500ms

Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qti.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/core.h        |  1 +
 drivers/net/wireless/ath/ath10k/debug.c       |  9 ++++--
 drivers/net/wireless/ath/ath10k/debug.h       |  6 ++++
 drivers/net/wireless/ath/ath10k/debugfs_sta.c | 41 +++++++++++++++++++++++++++
 4 files changed, 54 insertions(+), 3 deletions(-)

diff --git a/drivers/net/wireless/ath/ath10k/core.h b/drivers/net/wireless/ath/ath10k/core.h
index d47a08568bdc..921b86a4f257 100644
--- a/drivers/net/wireless/ath/ath10k/core.h
+++ b/drivers/net/wireless/ath/ath10k/core.h
@@ -316,6 +316,7 @@ struct ath10k_sta {
 #ifdef CONFIG_MAC80211_DEBUGFS
 	/* protected by conf_mutex */
 	bool aggr_mode;
+	u64 rx_duration;
 #endif
 };
 
diff --git a/drivers/net/wireless/ath/ath10k/debug.c b/drivers/net/wireless/ath/ath10k/debug.c
index 3b8da817972b..8d4148a96af8 100644
--- a/drivers/net/wireless/ath/ath10k/debug.c
+++ b/drivers/net/wireless/ath/ath10k/debug.c
@@ -319,7 +319,7 @@ static void ath10k_debug_fw_stats_reset(struct ath10k *ar)
 void ath10k_debug_fw_stats_process(struct ath10k *ar, struct sk_buff *skb)
 {
 	struct ath10k_fw_stats stats = {};
-	bool is_start, is_started, is_end;
+	bool is_start, is_started, is_end, peer_stats_svc;
 	size_t num_peers;
 	size_t num_vdevs;
 	int ret;
@@ -347,8 +347,8 @@ void ath10k_debug_fw_stats_process(struct ath10k *ar, struct sk_buff *skb)
 	 *     delivered which is treated as end-of-data and is itself discarded
 	 */
 
-	if (ar->debug.fw_stats_done &&
-	    !test_bit(WMI_SERVICE_PEER_STATS, ar->wmi.svc_map)) {
+	peer_stats_svc = test_bit(WMI_SERVICE_PEER_STATS, ar->wmi.svc_map);
+	if (ar->debug.fw_stats_done && !peer_stats_svc) {
 		ath10k_warn(ar, "received unsolicited stats update event\n");
 		goto free;
 	}
@@ -384,6 +384,9 @@ void ath10k_debug_fw_stats_process(struct ath10k *ar, struct sk_buff *skb)
 			goto free;
 		}
 
+		if (peer_stats_svc)
+			ath10k_sta_update_rx_duration(ar, &stats.peers);
+
 		list_splice_tail_init(&stats.peers, &ar->debug.fw_stats.peers);
 		list_splice_tail_init(&stats.vdevs, &ar->debug.fw_stats.vdevs);
 	}
diff --git a/drivers/net/wireless/ath/ath10k/debug.h b/drivers/net/wireless/ath/ath10k/debug.h
index 814719cf4f22..f273478e2afb 100644
--- a/drivers/net/wireless/ath/ath10k/debug.h
+++ b/drivers/net/wireless/ath/ath10k/debug.h
@@ -153,6 +153,12 @@ ath10k_debug_get_new_fw_crash_data(struct ath10k *ar)
 #ifdef CONFIG_MAC80211_DEBUGFS
 void ath10k_sta_add_debugfs(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
 			    struct ieee80211_sta *sta, struct dentry *dir);
+void ath10k_sta_update_rx_duration(struct ath10k *ar, struct list_head *peer);
+#else
+static inline void ath10k_sta_update_rx_duration(struct ath10k *ar,
+						 struct list_head *peer)
+{
+}
 #endif /* CONFIG_MAC80211_DEBUGFS */
 
 #ifdef CONFIG_ATH10K_DEBUG
diff --git a/drivers/net/wireless/ath/ath10k/debugfs_sta.c b/drivers/net/wireless/ath/ath10k/debugfs_sta.c
index 95b5c49374e0..67ef75b60567 100644
--- a/drivers/net/wireless/ath/ath10k/debugfs_sta.c
+++ b/drivers/net/wireless/ath/ath10k/debugfs_sta.c
@@ -18,6 +18,23 @@
 #include "wmi-ops.h"
 #include "debug.h"
 
+void ath10k_sta_update_rx_duration(struct ath10k *ar, struct list_head *head)
+{	struct ieee80211_sta *sta;
+	struct ath10k_fw_stats_peer *peer;
+	struct ath10k_sta *arsta;
+
+	rcu_read_lock();
+	list_for_each_entry(peer, head, list) {
+		sta = ieee80211_find_sta_by_ifaddr(ar->hw, peer->peer_macaddr,
+						   NULL);
+		if (!sta)
+			continue;
+		arsta = (struct ath10k_sta *)sta->drv_priv;
+		arsta->rx_duration += (u64)peer->rx_duration;
+	}
+	rcu_read_unlock();
+}
+
 static ssize_t ath10k_dbg_sta_read_aggr_mode(struct file *file,
 					     char __user *user_buf,
 					     size_t count, loff_t *ppos)
@@ -232,6 +249,28 @@ static const struct file_operations fops_delba = {
 	.llseek = default_llseek,
 };
 
+static ssize_t ath10k_dbg_sta_read_rx_duration(struct file *file,
+					       char __user *user_buf,
+					       size_t count, loff_t *ppos)
+{
+	struct ieee80211_sta *sta = file->private_data;
+	struct ath10k_sta *arsta = (struct ath10k_sta *)sta->drv_priv;
+	char buf[100];
+	int len = 0;
+
+	len = scnprintf(buf, sizeof(buf),
+			"%llu usecs\n", arsta->rx_duration);
+
+	return simple_read_from_buffer(user_buf, count, ppos, buf, len);
+}
+
+static const struct file_operations fops_rx_duration = {
+	.read = ath10k_dbg_sta_read_rx_duration,
+	.open = simple_open,
+	.owner = THIS_MODULE,
+	.llseek = default_llseek,
+};
+
 void ath10k_sta_add_debugfs(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
 			    struct ieee80211_sta *sta, struct dentry *dir)
 {
@@ -240,4 +279,6 @@ void ath10k_sta_add_debugfs(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
 	debugfs_create_file("addba", S_IWUSR, dir, sta, &fops_addba);
 	debugfs_create_file("addba_resp", S_IWUSR, dir, sta, &fops_addba_resp);
 	debugfs_create_file("delba", S_IWUSR, dir, sta, &fops_delba);
+	debugfs_create_file("rx_duration", S_IRUGO, dir, sta,
+			    &fops_rx_duration);
 }
-- 
cgit v1.2.3


From 8b019fb0d0e75e2f682f17742b99c0ca970ca024 Mon Sep 17 00:00:00 2001
From: Yanbo Li <yanbol@qca.qualcomm.com>
Date: Thu, 14 Jan 2016 15:39:19 -0800
Subject: ath10k: remove the p2p notice of absence info from 10.2.4 FW beacon
 info

The p2p NOA never been supported at 10.2.4 FW, remove it to avoid SWBA
event parse error for multi beacon interval case.

Signed-off-by: Yanbo Li <yanbol@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/wmi.c | 46 ++++++++++++++++++++++++++++++++++-
 drivers/net/wireless/ath/ath10k/wmi.h | 10 ++++++++
 2 files changed, 55 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/ath/ath10k/wmi.c b/drivers/net/wireless/ath/ath10k/wmi.c
index c610d1761940..0f01a8d99604 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.c
+++ b/drivers/net/wireless/ath/ath10k/wmi.c
@@ -3256,6 +3256,50 @@ static int ath10k_wmi_op_pull_swba_ev(struct ath10k *ar, struct sk_buff *skb,
 	return 0;
 }
 
+static int ath10k_wmi_10_2_4_op_pull_swba_ev(struct ath10k *ar,
+					     struct sk_buff *skb,
+					     struct wmi_swba_ev_arg *arg)
+{
+	struct wmi_10_2_4_host_swba_event *ev = (void *)skb->data;
+	u32 map;
+	size_t i;
+
+	if (skb->len < sizeof(*ev))
+		return -EPROTO;
+
+	skb_pull(skb, sizeof(*ev));
+	arg->vdev_map = ev->vdev_map;
+
+	for (i = 0, map = __le32_to_cpu(ev->vdev_map); map; map >>= 1) {
+		if (!(map & BIT(0)))
+			continue;
+
+		/* If this happens there were some changes in firmware and
+		 * ath10k should update the max size of tim_info array.
+		 */
+		if (WARN_ON_ONCE(i == ARRAY_SIZE(arg->tim_info)))
+			break;
+
+		if (__le32_to_cpu(ev->bcn_info[i].tim_info.tim_len) >
+		     sizeof(ev->bcn_info[i].tim_info.tim_bitmap)) {
+			ath10k_warn(ar, "refusing to parse invalid swba structure\n");
+			return -EPROTO;
+		}
+
+		arg->tim_info[i].tim_len = ev->bcn_info[i].tim_info.tim_len;
+		arg->tim_info[i].tim_mcast = ev->bcn_info[i].tim_info.tim_mcast;
+		arg->tim_info[i].tim_bitmap =
+				ev->bcn_info[i].tim_info.tim_bitmap;
+		arg->tim_info[i].tim_changed =
+				ev->bcn_info[i].tim_info.tim_changed;
+		arg->tim_info[i].tim_num_ps_pending =
+				ev->bcn_info[i].tim_info.tim_num_ps_pending;
+		i++;
+	}
+
+	return 0;
+}
+
 static int ath10k_wmi_10_4_op_pull_swba_ev(struct ath10k *ar,
 					   struct sk_buff *skb,
 					   struct wmi_swba_ev_arg *arg)
@@ -7584,7 +7628,7 @@ static const struct wmi_ops wmi_10_2_4_ops = {
 	.pull_ch_info = ath10k_wmi_op_pull_ch_info_ev,
 	.pull_vdev_start = ath10k_wmi_op_pull_vdev_start_ev,
 	.pull_peer_kick = ath10k_wmi_op_pull_peer_kick_ev,
-	.pull_swba = ath10k_wmi_op_pull_swba_ev,
+	.pull_swba = ath10k_wmi_10_2_4_op_pull_swba_ev,
 	.pull_phyerr_hdr = ath10k_wmi_op_pull_phyerr_ev_hdr,
 	.pull_phyerr = ath10k_wmi_op_pull_phyerr_ev,
 	.pull_rdy = ath10k_wmi_op_pull_rdy_ev,
diff --git a/drivers/net/wireless/ath/ath10k/wmi.h b/drivers/net/wireless/ath/ath10k/wmi.h
index 187f495c1fbe..806d4bb6e7d6 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.h
+++ b/drivers/net/wireless/ath/ath10k/wmi.h
@@ -5454,6 +5454,16 @@ struct wmi_host_swba_event {
 	struct wmi_bcn_info bcn_info[0];
 } __packed;
 
+struct wmi_10_2_4_bcn_info {
+	struct wmi_tim_info tim_info;
+	/* The 10.2.4 FW doesn't have p2p NOA info */
+} __packed;
+
+struct wmi_10_2_4_host_swba_event {
+	__le32 vdev_map;
+	struct wmi_10_2_4_bcn_info bcn_info[0];
+} __packed;
+
 /* 16 words = 512 client + 1 word = for guard */
 #define WMI_10_4_TIM_BITMAP_ARRAY_SIZE 17
 
-- 
cgit v1.2.3


From b9a9693fd9aea43f50b107dfc8cbaea317f95a79 Mon Sep 17 00:00:00 2001
From: Kalle Valo <Janusz.Dziedzic@tieto.com>
Date: Fri, 27 Nov 2015 09:37:14 +0100
Subject: ath9k: request NOA update when chanctx active

Request NOA update when chanctx active, also in case
of STA.

Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath9k/channel.c | 2 +-
 drivers/net/wireless/ath/ath9k/main.c    | 5 ++++-
 2 files changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/ath/ath9k/channel.c b/drivers/net/wireless/ath/ath9k/channel.c
index 50e614b915f1..0bcb82abd094 100644
--- a/drivers/net/wireless/ath/ath9k/channel.c
+++ b/drivers/net/wireless/ath/ath9k/channel.c
@@ -1454,7 +1454,7 @@ static void ath9k_update_p2p_ps(struct ath_softc *sc, struct ieee80211_vif *vif)
 	if (!sc->p2p_ps_timer)
 		return;
 
-	if (vif->type != NL80211_IFTYPE_STATION || !vif->p2p)
+	if (vif->type != NL80211_IFTYPE_STATION)
 		return;
 
 	sc->p2p_ps_vif = avp;
diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c
index c1b33fdcca08..4ae63fd4290e 100644
--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
@@ -978,7 +978,7 @@ static void ath9k_update_bssid_mask(struct ath_softc *sc,
 		if (ctx->nvifs_assigned != 1)
 			continue;
 
-		if (!avp->vif->p2p || !iter_data->has_hw_macaddr)
+		if (!iter_data->has_hw_macaddr)
 			continue;
 
 		ether_addr_copy(common->curbssid, avp->bssid);
@@ -1255,6 +1255,9 @@ static int ath9k_add_interface(struct ieee80211_hw *hw,
 	ath_dbg(common, CONFIG, "Attach a VIF of type: %d\n", vif->type);
 	sc->cur_chan->nvifs++;
 
+	if (vif->type == NL80211_IFTYPE_STATION && ath9k_is_chanctx_enabled())
+		vif->driver_flags |= IEEE80211_VIF_GET_NOA_UPDATE;
+
 	if (ath9k_uses_beacons(vif->type))
 		ath9k_beacon_assign_slot(sc, vif);
 
-- 
cgit v1.2.3


From aea57edf80c6e96d6dc24757599396af99c02b19 Mon Sep 17 00:00:00 2001
From: Alexander Tsoy <alexander@tsoy.me>
Date: Fri, 8 Jan 2016 01:26:03 +0300
Subject: ath9k_htc: add device ID for Toshiba WLM-20U2/GN-1080

This device is available under different marketing names:
WLM-20U2 - Wireless USB Dongle for Toshiba TVs
GN-1080 - Wireless LAN Module for Toshiba MFPs.

Signed-off-by: Alexander Tsoy <alexander@tsoy.me>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath9k/hif_usb.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/net/wireless/ath/ath9k/hif_usb.c b/drivers/net/wireless/ath/ath9k/hif_usb.c
index 165dd202c365..8cbf4904db7b 100644
--- a/drivers/net/wireless/ath/ath9k/hif_usb.c
+++ b/drivers/net/wireless/ath/ath9k/hif_usb.c
@@ -55,6 +55,8 @@ static struct usb_device_id ath9k_hif_usb_ids[] = {
 	  .driver_info = AR9280_USB },  /* Buffalo WLI-UV-AG300P */
 	{ USB_DEVICE(0x04da, 0x3904),
 	  .driver_info = AR9280_USB },
+	{ USB_DEVICE(0x0930, 0x0a08),
+	  .driver_info = AR9280_USB },  /* Toshiba WLM-20U2 and GN-1080 */
 
 	{ USB_DEVICE(0x0cf3, 0x20ff),
 	  .driver_info = STORAGE_DEVICE },
-- 
cgit v1.2.3


From c5a157e4d7d7f1d39dbb382bc3ad7ea9f248ed7d Mon Sep 17 00:00:00 2001
From: Lior David <liord@qti.qualcomm.com>
Date: Sun, 17 Jan 2016 12:39:06 +0200
Subject: wil6210: fix privacy flag calculation in change_beacon

Currently the privacy flag calculation in change_beacon
checks for RSN IE inside proberesp_ies, but normally it
is not found there. It works today because of code inside
the function wil_fix_bcon, but wil_fix_bcon is not directly
related to change_beacon, and it may be changed or removed
in the future and break the calculation.
To fix this issue, change the privacy flag calculation
to check RSN IE inside the beacon itself. The new check is more
reliable and will not be sensitive to changes in wil_fix_bcon.

Signed-off-by: Lior David <qca_liord@qca.qualcomm.com>
Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/wil6210/cfg80211.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/net/wireless/ath/wil6210/cfg80211.c b/drivers/net/wireless/ath/wil6210/cfg80211.c
index 20d07ef679e8..182f071f722d 100644
--- a/drivers/net/wireless/ath/wil6210/cfg80211.c
+++ b/drivers/net/wireless/ath/wil6210/cfg80211.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2012-2015 Qualcomm Atheros, Inc.
+ * Copyright (c) 2012-2016 Qualcomm Atheros, Inc.
  *
  * Permission to use, copy, modify, and/or distribute this software for any
  * purpose with or without fee is hereby granted, provided that the above
@@ -828,9 +828,9 @@ static int wil_cfg80211_change_beacon(struct wiphy *wiphy,
 		wil_print_bcon_data(bcon);
 	}
 
-	if (bcon->proberesp_ies &&
-	    cfg80211_find_ie(WLAN_EID_RSN, bcon->proberesp_ies,
-			     bcon->proberesp_ies_len))
+	if (bcon->tail &&
+	    cfg80211_find_ie(WLAN_EID_RSN, bcon->tail,
+			     bcon->tail_len))
 		privacy = 1;
 
 	/* in case privacy has changed, need to restart the AP */
-- 
cgit v1.2.3


From c100c883e785802ab333604237928a65ae62c6bc Mon Sep 17 00:00:00 2001
From: Lior David <qca_liord@qca.qualcomm.com>
Date: Sun, 17 Jan 2016 12:39:07 +0200
Subject: wil6210: use extra IEs from probe response

In the start_ap/change_beacon API, when we set up probe response
offloading, we only use the IE list from the probe response
template and not the IE list from the proberesp_ies argument.
As a result, we miss important IEs and it causes problems with
some scenarios such as P2P.
With this change, we merge the list of IEs from the probe response
template and proberesp_ies and send the merged list to the FW
for offloading. It is still FW responsibility to filter out
irrelevant IEs when sending probe response, based on the actual
contents of the probe request.
Also in case association response termplate is not provided,
we will use the merged list of IEs from probe response in the
association response as well.

Signed-off-by: Lior David <qca_liord@qca.qualcomm.com>
Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/wil6210/cfg80211.c | 141 ++++++++++++++++++++--------
 1 file changed, 102 insertions(+), 39 deletions(-)

diff --git a/drivers/net/wireless/ath/wil6210/cfg80211.c b/drivers/net/wireless/ath/wil6210/cfg80211.c
index 182f071f722d..774352f9e256 100644
--- a/drivers/net/wireless/ath/wil6210/cfg80211.c
+++ b/drivers/net/wireless/ath/wil6210/cfg80211.c
@@ -696,6 +696,79 @@ static int wil_cancel_remain_on_channel(struct wiphy *wiphy,
 	return rc;
 }
 
+/**
+ * find a specific IE in a list of IEs
+ * return a pointer to the beginning of IE in the list
+ * or NULL if not found
+ */
+static const u8 *_wil_cfg80211_find_ie(const u8 *ies, u16 ies_len, const u8 *ie,
+				       u16 ie_len)
+{
+	struct ieee80211_vendor_ie *vie;
+	u32 oui;
+
+	/* IE tag at offset 0, length at offset 1 */
+	if (ie_len < 2 || 2 + ie[1] > ie_len)
+		return NULL;
+
+	if (ie[0] != WLAN_EID_VENDOR_SPECIFIC)
+		return cfg80211_find_ie(ie[0], ies, ies_len);
+
+	/* make sure there is room for 3 bytes OUI + 1 byte OUI type */
+	if (ie[1] < 4)
+		return NULL;
+	vie = (struct ieee80211_vendor_ie *)ie;
+	oui = vie->oui[0] << 16 | vie->oui[1] << 8 | vie->oui[2];
+	return cfg80211_find_vendor_ie(oui, vie->oui_type, ies,
+				       ies_len);
+}
+
+/**
+ * merge the IEs in two lists into a single list.
+ * do not include IEs from the second list which exist in the first list.
+ * add only vendor specific IEs from second list to keep
+ * the merged list sorted (since vendor-specific IE has the
+ * highest tag number)
+ * caller must free the allocated memory for merged IEs
+ */
+static int _wil_cfg80211_merge_extra_ies(const u8 *ies1, u16 ies1_len,
+					 const u8 *ies2, u16 ies2_len,
+					 u8 **merged_ies, u16 *merged_len)
+{
+	u8 *buf, *dpos;
+	const u8 *spos;
+
+	if (ies1_len == 0 && ies2_len == 0) {
+		*merged_ies = NULL;
+		*merged_len = 0;
+		return 0;
+	}
+
+	buf = kmalloc(ies1_len + ies2_len, GFP_KERNEL);
+	if (!buf)
+		return -ENOMEM;
+	memcpy(buf, ies1, ies1_len);
+	dpos = buf + ies1_len;
+	spos = ies2;
+	while (spos + 1 < ies2 + ies2_len) {
+		/* IE tag at offset 0, length at offset 1 */
+		u16 ielen = 2 + spos[1];
+
+		if (spos + ielen > ies2 + ies2_len)
+			break;
+		if (spos[0] == WLAN_EID_VENDOR_SPECIFIC &&
+		    !_wil_cfg80211_find_ie(ies1, ies1_len, spos, ielen)) {
+			memcpy(dpos, spos, ielen);
+			dpos += ielen;
+		}
+		spos += ielen;
+	}
+
+	*merged_ies = buf;
+	*merged_len = dpos - buf;
+	return 0;
+}
+
 static void wil_print_bcon_data(struct cfg80211_beacon_data *b)
 {
 	print_hex_dump_bytes("head     ", DUMP_PREFIX_OFFSET,
@@ -712,49 +785,49 @@ static void wil_print_bcon_data(struct cfg80211_beacon_data *b)
 			     b->assocresp_ies, b->assocresp_ies_len);
 }
 
-static int wil_fix_bcon(struct wil6210_priv *wil,
-			struct cfg80211_beacon_data *bcon)
-{
-	struct ieee80211_mgmt *f = (struct ieee80211_mgmt *)bcon->probe_resp;
-	size_t hlen = offsetof(struct ieee80211_mgmt, u.probe_resp.variable);
-
-	if (bcon->probe_resp_len <= hlen)
-		return 0;
-
-/* always use IE's from full probe frame, they has more info
- * notable RSN
- */
-	bcon->proberesp_ies = f->u.probe_resp.variable;
-	bcon->proberesp_ies_len = bcon->probe_resp_len - hlen;
-	if (!bcon->assocresp_ies) {
-		bcon->assocresp_ies = bcon->proberesp_ies;
-		bcon->assocresp_ies_len = bcon->proberesp_ies_len;
-	}
-
-	return 1;
-}
-
 /* internal functions for device reset and starting AP */
 static int _wil_cfg80211_set_ies(struct wiphy *wiphy,
 				 struct cfg80211_beacon_data *bcon)
 {
 	int rc;
 	struct wil6210_priv *wil = wiphy_to_wil(wiphy);
+	u16 len = 0, proberesp_len = 0;
+	u8 *ies = NULL, *proberesp = NULL;
+
+	if (bcon->probe_resp) {
+		struct ieee80211_mgmt *f =
+			(struct ieee80211_mgmt *)bcon->probe_resp;
+		size_t hlen = offsetof(struct ieee80211_mgmt,
+				       u.probe_resp.variable);
+		proberesp = f->u.probe_resp.variable;
+		proberesp_len = bcon->probe_resp_len - hlen;
+	}
+	rc = _wil_cfg80211_merge_extra_ies(proberesp,
+					   proberesp_len,
+					   bcon->proberesp_ies,
+					   bcon->proberesp_ies_len,
+					   &ies, &len);
 
-	rc = wmi_set_ie(wil, WMI_FRAME_PROBE_RESP, bcon->proberesp_ies_len,
-			bcon->proberesp_ies);
 	if (rc)
-		return rc;
+		goto out;
 
-	rc = wmi_set_ie(wil, WMI_FRAME_ASSOC_RESP, bcon->assocresp_ies_len,
-			bcon->assocresp_ies);
+	rc = wmi_set_ie(wil, WMI_FRAME_PROBE_RESP, len, ies);
+	if (rc)
+		goto out;
+
+	if (bcon->assocresp_ies)
+		rc = wmi_set_ie(wil, WMI_FRAME_ASSOC_RESP,
+				bcon->assocresp_ies_len, bcon->assocresp_ies);
+	else
+		rc = wmi_set_ie(wil, WMI_FRAME_ASSOC_RESP, len, ies);
 #if 0 /* to use beacon IE's, remove this #if 0 */
 	if (rc)
-		return rc;
+		goto out;
 
 	rc = wmi_set_ie(wil, WMI_FRAME_BEACON, bcon->tail_len, bcon->tail);
 #endif
-
+out:
+	kfree(ies);
 	return rc;
 }
 
@@ -823,11 +896,6 @@ static int wil_cfg80211_change_beacon(struct wiphy *wiphy,
 	wil_dbg_misc(wil, "%s()\n", __func__);
 	wil_print_bcon_data(bcon);
 
-	if (wil_fix_bcon(wil, bcon)) {
-		wil_dbg_misc(wil, "Fixed bcon\n");
-		wil_print_bcon_data(bcon);
-	}
-
 	if (bcon->tail &&
 	    cfg80211_find_ie(WLAN_EID_RSN, bcon->tail,
 			     bcon->tail_len))
@@ -900,11 +968,6 @@ static int wil_cfg80211_start_ap(struct wiphy *wiphy,
 	wil_print_bcon_data(bcon);
 	wil_print_crypto(wil, crypto);
 
-	if (wil_fix_bcon(wil, bcon)) {
-		wil_dbg_misc(wil, "Fixed bcon\n");
-		wil_print_bcon_data(bcon);
-	}
-
 	rc = _wil_cfg80211_start_ap(wiphy, ndev,
 				    info->ssid, info->ssid_len, info->privacy,
 				    info->beacon_interval, channel->hw_value,
-- 
cgit v1.2.3


From 640751ac30b2ddfbe06ad712aa7d57a8d89a7eef Mon Sep 17 00:00:00 2001
From: Maya Erez <qca_merez@qca.qualcomm.com>
Date: Sun, 17 Jan 2016 12:39:08 +0200
Subject: wil6210: handle tx completions only if vring tx data is enabled

wil_vring_fini_tx is called in disconnect in order to free the
allocated vrings.
wil_vring_fini_tx is disabling the vring_tx_data before napi_synchronize
is called in order to avoid the tx handling of this vring, while
wil_vring_free is called only after napi finished the current handling
of the tx completed packets.
Due to that, in case of disconnect, wil6210_netdev_poll_tx can be called
when vring->va is not NULL but vring_tx_data[i]->enabled is already
disabled.

This patch checks vring_tx_data[i]->enabled in wil6210_netdev_poll_tx
to prevent handling of disabled vrings.

Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/wil6210/netdev.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/ath/wil6210/netdev.c b/drivers/net/wireless/ath/wil6210/netdev.c
index 56aaa2d4fb0e..ecc3c1bdae4b 100644
--- a/drivers/net/wireless/ath/wil6210/netdev.c
+++ b/drivers/net/wireless/ath/wil6210/netdev.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2012-2015 Qualcomm Atheros, Inc.
+ * Copyright (c) 2012-2016 Qualcomm Atheros, Inc.
  *
  * Permission to use, copy, modify, and/or distribute this software for any
  * purpose with or without fee is hereby granted, provided that the above
@@ -108,8 +108,9 @@ static int wil6210_netdev_poll_tx(struct napi_struct *napi, int budget)
 	/* always process ALL Tx complete, regardless budget - it is fast */
 	for (i = 0; i < WIL6210_MAX_TX_RINGS; i++) {
 		struct vring *vring = &wil->vring_tx[i];
+		struct vring_tx_data *txdata = &wil->vring_tx_data[i];
 
-		if (!vring->va)
+		if (!vring->va || !txdata->enabled)
 			continue;
 
 		tx_done += wil_tx_complete(wil, i);
-- 
cgit v1.2.3


From b729aaf066b013458e95cd6c69a5e371eb9ce355 Mon Sep 17 00:00:00 2001
From: Maya Erez <qca_merez@qca.qualcomm.com>
Date: Sun, 17 Jan 2016 12:39:09 +0200
Subject: wil6210: find TX vring only if vring_tx_data is enabled

In TX vring allocation, vring_tx->va is allocated before WMI command to
configure the vring is sent to the device. As the WMI command can take
time to complete, it can lead to scenarios where vring_tx->va is not NULL
but vring is still not enabled.

This patch adds a check that vring_tx_data is enabled before returning
a valid TX vring.

Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/wil6210/txrx.c | 17 ++++++++++++-----
 1 file changed, 12 insertions(+), 5 deletions(-)

diff --git a/drivers/net/wireless/ath/wil6210/txrx.c b/drivers/net/wireless/ath/wil6210/txrx.c
index 7887e6cfd817..c22ee8b3ed9b 100644
--- a/drivers/net/wireless/ath/wil6210/txrx.c
+++ b/drivers/net/wireless/ath/wil6210/txrx.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2012-2015 Qualcomm Atheros, Inc.
+ * Copyright (c) 2012-2016 Qualcomm Atheros, Inc.
  *
  * Permission to use, copy, modify, and/or distribute this software for any
  * purpose with or without fee is hereby granted, provided that the above
@@ -911,10 +911,11 @@ static struct vring *wil_find_tx_ucast(struct wil6210_priv *wil,
 			continue;
 		if (wil->vring2cid_tid[i][0] == cid) {
 			struct vring *v = &wil->vring_tx[i];
+			struct vring_tx_data *txdata = &wil->vring_tx_data[i];
 
 			wil_dbg_txrx(wil, "%s(%pM) -> [%d]\n",
 				     __func__, eth->h_dest, i);
-			if (v->va) {
+			if (v->va && txdata->enabled) {
 				return v;
 			} else {
 				wil_dbg_txrx(wil, "vring[%d] not valid\n", i);
@@ -935,6 +936,7 @@ static struct vring *wil_find_tx_vring_sta(struct wil6210_priv *wil,
 	struct vring *v;
 	int i;
 	u8 cid;
+	struct vring_tx_data *txdata;
 
 	/* In the STA mode, it is expected to have only 1 VRING
 	 * for the AP we connected to.
@@ -942,7 +944,8 @@ static struct vring *wil_find_tx_vring_sta(struct wil6210_priv *wil,
 	 */
 	for (i = 0; i < WIL6210_MAX_TX_RINGS; i++) {
 		v = &wil->vring_tx[i];
-		if (!v->va)
+		txdata = &wil->vring_tx_data[i];
+		if (!v->va || !txdata->enabled)
 			continue;
 
 		cid = wil->vring2cid_tid[i][0];
@@ -978,12 +981,14 @@ static struct vring *wil_find_tx_bcast_1(struct wil6210_priv *wil,
 					 struct sk_buff *skb)
 {
 	struct vring *v;
+	struct vring_tx_data *txdata;
 	int i = wil->bcast_vring;
 
 	if (i < 0)
 		return NULL;
 	v = &wil->vring_tx[i];
-	if (!v->va)
+	txdata = &wil->vring_tx_data[i];
+	if (!v->va || !txdata->enabled)
 		return NULL;
 	if (!wil->vring_tx_data[i].dot1x_open &&
 	    (skb->protocol != cpu_to_be16(ETH_P_PAE)))
@@ -1010,11 +1015,13 @@ static struct vring *wil_find_tx_bcast_2(struct wil6210_priv *wil,
 	u8 cid;
 	struct ethhdr *eth = (void *)skb->data;
 	char *src = eth->h_source;
+	struct vring_tx_data *txdata;
 
 	/* find 1-st vring eligible for data */
 	for (i = 0; i < WIL6210_MAX_TX_RINGS; i++) {
 		v = &wil->vring_tx[i];
-		if (!v->va)
+		txdata = &wil->vring_tx_data[i];
+		if (!v->va || !txdata->enabled)
 			continue;
 
 		cid = wil->vring2cid_tid[i][0];
-- 
cgit v1.2.3


From 0916d9f2b6bea53a830ae5061b63a515c04da62e Mon Sep 17 00:00:00 2001
From: Maya Erez <qca_merez@qca.qualcomm.com>
Date: Sun, 17 Jan 2016 12:39:10 +0200
Subject: wil6210: handle multiple connect/disconnect events

In the current solution wil6210 configures the vring in a worker
and holds only one pending CID. This implementation may lead to
race conditions between connect and disconnect events of multiple
stations or fast connect/disconnect events of the same station.

In order to allow the removal of the connect worker and handling of
WMI_VRING_CFG_DONE_EVENTID in the connect event, the WMI replies
that provide the reply in a given buffer needs to be handled
immediately in the WMI event interrupt thread.
To prevent deadlocks, WMI replies that requires additional
handling are still handled via the events list.

Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/wil6210/main.c    |  81 +++++++--------
 drivers/net/wireless/ath/wil6210/txrx.c    |   3 +
 drivers/net/wireless/ath/wil6210/wil6210.h |   8 +-
 drivers/net/wireless/ath/wil6210/wmi.c     | 157 +++++++++++++++++++++--------
 4 files changed, 156 insertions(+), 93 deletions(-)

diff --git a/drivers/net/wireless/ath/wil6210/main.c b/drivers/net/wireless/ath/wil6210/main.c
index b39f0bfc591e..0652efed6b5d 100644
--- a/drivers/net/wireless/ath/wil6210/main.c
+++ b/drivers/net/wireless/ath/wil6210/main.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2012-2015 Qualcomm Atheros, Inc.
+ * Copyright (c) 2012-2016 Qualcomm Atheros, Inc.
  *
  * Permission to use, copy, modify, and/or distribute this software for any
  * purpose with or without fee is hereby granted, provided that the above
@@ -155,7 +155,7 @@ __acquires(&sta->tid_rx_lock) __releases(&sta->tid_rx_lock)
 
 	if (sta->status != wil_sta_unused) {
 		if (!from_event)
-			wmi_disconnect_sta(wil, sta->addr, reason_code);
+			wmi_disconnect_sta(wil, sta->addr, reason_code, true);
 
 		switch (wdev->iftype) {
 		case NL80211_IFTYPE_AP:
@@ -195,8 +195,8 @@ static void _wil6210_disconnect(struct wil6210_priv *wil, const u8 *bssid,
 	struct wireless_dev *wdev = wil->wdev;
 
 	might_sleep();
-	wil_dbg_misc(wil, "%s(bssid=%pM, reason=%d, ev%s)\n", __func__, bssid,
-		     reason_code, from_event ? "+" : "-");
+	wil_info(wil, "%s(bssid=%pM, reason=%d, ev%s)\n", __func__, bssid,
+		 reason_code, from_event ? "+" : "-");
 
 	/* Cases are:
 	 * - disconnect single STA, still connected
@@ -258,13 +258,16 @@ static void wil_disconnect_worker(struct work_struct *work)
 static void wil_connect_timer_fn(ulong x)
 {
 	struct wil6210_priv *wil = (void *)x;
+	bool q;
 
-	wil_dbg_misc(wil, "Connect timeout\n");
+	wil_err(wil, "Connect timeout detected, disconnect station\n");
 
 	/* reschedule to thread context - disconnect won't
-	 * run from atomic context
+	 * run from atomic context.
+	 * queue on wmi_wq to prevent race with connect event.
 	 */
-	schedule_work(&wil->disconnect_worker);
+	q = queue_work(wil->wmi_wq, &wil->disconnect_worker);
+	wil_dbg_wmi(wil, "queue_work of disconnect_worker -> %d\n", q);
 }
 
 static void wil_scan_timer_fn(ulong x)
@@ -369,6 +372,32 @@ static int wil_find_free_vring(struct wil6210_priv *wil)
 	return -EINVAL;
 }
 
+int wil_tx_init(struct wil6210_priv *wil, int cid)
+{
+	int rc = -EINVAL, ringid;
+
+	if (cid < 0) {
+		wil_err(wil, "No connection pending\n");
+		goto out;
+	}
+	ringid = wil_find_free_vring(wil);
+	if (ringid < 0) {
+		wil_err(wil, "No free vring found\n");
+		goto out;
+	}
+
+	wil_dbg_wmi(wil, "Configure for connection CID %d vring %d\n",
+		    cid, ringid);
+
+	rc = wil_vring_init_tx(wil, ringid, 1 << tx_ring_order, cid, 0);
+	if (rc)
+		wil_err(wil, "wil_vring_init_tx for CID %d vring %d failed\n",
+			cid, ringid);
+
+out:
+	return rc;
+}
+
 int wil_bcast_init(struct wil6210_priv *wil)
 {
 	int ri = wil->bcast_vring, rc;
@@ -399,41 +428,6 @@ void wil_bcast_fini(struct wil6210_priv *wil)
 	wil_vring_fini_tx(wil, ri);
 }
 
-static void wil_connect_worker(struct work_struct *work)
-{
-	int rc, cid, ringid;
-	struct wil6210_priv *wil = container_of(work, struct wil6210_priv,
-						connect_worker);
-	struct net_device *ndev = wil_to_ndev(wil);
-
-	mutex_lock(&wil->mutex);
-
-	cid = wil->pending_connect_cid;
-	if (cid < 0) {
-		wil_err(wil, "No connection pending\n");
-		goto out;
-	}
-	ringid = wil_find_free_vring(wil);
-	if (ringid < 0) {
-		wil_err(wil, "No free vring found\n");
-		goto out;
-	}
-
-	wil_dbg_wmi(wil, "Configure for connection CID %d vring %d\n",
-		    cid, ringid);
-
-	rc = wil_vring_init_tx(wil, ringid, 1 << tx_ring_order, cid, 0);
-	wil->pending_connect_cid = -1;
-	if (rc == 0) {
-		wil->sta[cid].status = wil_sta_connected;
-		netif_tx_wake_all_queues(ndev);
-	} else {
-		wil_disconnect_cid(wil, cid, WLAN_REASON_UNSPECIFIED, true);
-	}
-out:
-	mutex_unlock(&wil->mutex);
-}
-
 int wil_priv_init(struct wil6210_priv *wil)
 {
 	uint i;
@@ -453,12 +447,10 @@ int wil_priv_init(struct wil6210_priv *wil)
 	init_completion(&wil->wmi_ready);
 	init_completion(&wil->wmi_call);
 
-	wil->pending_connect_cid = -1;
 	wil->bcast_vring = -1;
 	setup_timer(&wil->connect_timer, wil_connect_timer_fn, (ulong)wil);
 	setup_timer(&wil->scan_timer, wil_scan_timer_fn, (ulong)wil);
 
-	INIT_WORK(&wil->connect_worker, wil_connect_worker);
 	INIT_WORK(&wil->disconnect_worker, wil_disconnect_worker);
 	INIT_WORK(&wil->wmi_event_worker, wmi_event_worker);
 	INIT_WORK(&wil->fw_error_worker, wil_fw_error_worker);
@@ -844,7 +836,6 @@ int wil_reset(struct wil6210_priv *wil, bool load_fw)
 	}
 
 	/* init after reset */
-	wil->pending_connect_cid = -1;
 	wil->ap_isolate = 0;
 	reinit_completion(&wil->wmi_ready);
 	reinit_completion(&wil->wmi_call);
diff --git a/drivers/net/wireless/ath/wil6210/txrx.c b/drivers/net/wireless/ath/wil6210/txrx.c
index c22ee8b3ed9b..9680b970b863 100644
--- a/drivers/net/wireless/ath/wil6210/txrx.c
+++ b/drivers/net/wireless/ath/wil6210/txrx.c
@@ -794,6 +794,9 @@ int wil_vring_init_tx(struct wil6210_priv *wil, int id, int size,
 	txdata->dot1x_open = false;
 	txdata->enabled = 0;
 	wil_vring_free(wil, vring, 1);
+	wil->vring2cid_tid[id][0] = WIL6210_MAX_CID;
+	wil->vring2cid_tid[id][1] = 0;
+
  out:
 
 	return rc;
diff --git a/drivers/net/wireless/ath/wil6210/wil6210.h b/drivers/net/wireless/ath/wil6210/wil6210.h
index 235e205ce2bc..1b8fa1d2bae9 100644
--- a/drivers/net/wireless/ath/wil6210/wil6210.h
+++ b/drivers/net/wireless/ath/wil6210/wil6210.h
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2012-2015 Qualcomm Atheros, Inc.
+ * Copyright (c) 2012-2016 Qualcomm Atheros, Inc.
  *
  * Permission to use, copy, modify, and/or distribute this software for any
  * purpose with or without fee is hereby granted, provided that the above
@@ -581,12 +581,10 @@ struct wil6210_priv {
 	struct workqueue_struct *wmi_wq; /* for deferred calls */
 	struct work_struct wmi_event_worker;
 	struct workqueue_struct *wq_service;
-	struct work_struct connect_worker;
 	struct work_struct disconnect_worker;
 	struct work_struct fw_error_worker;	/* for FW error recovery */
 	struct timer_list connect_timer;
 	struct timer_list scan_timer; /* detect scan timeout */
-	int pending_connect_cid;
 	struct list_head pending_wmi_ev;
 	/*
 	 * protect pending_wmi_ev
@@ -756,7 +754,8 @@ int wmi_rx_chain_add(struct wil6210_priv *wil, struct vring *vring);
 int wmi_p2p_cfg(struct wil6210_priv *wil, int channel);
 int wmi_rxon(struct wil6210_priv *wil, bool on);
 int wmi_get_temperature(struct wil6210_priv *wil, u32 *t_m, u32 *t_r);
-int wmi_disconnect_sta(struct wil6210_priv *wil, const u8 *mac, u16 reason);
+int wmi_disconnect_sta(struct wil6210_priv *wil, const u8 *mac, u16 reason,
+		       bool full_disconnect);
 int wmi_addba(struct wil6210_priv *wil, u8 ringid, u8 size, u16 timeout);
 int wmi_delba_tx(struct wil6210_priv *wil, u8 ringid, u16 reason);
 int wmi_delba_rx(struct wil6210_priv *wil, u8 cidxtid, u16 reason);
@@ -807,6 +806,7 @@ void wil_rx_fini(struct wil6210_priv *wil);
 int wil_vring_init_tx(struct wil6210_priv *wil, int id, int size,
 		      int cid, int tid);
 void wil_vring_fini_tx(struct wil6210_priv *wil, int id);
+int wil_tx_init(struct wil6210_priv *wil, int cid);
 int wil_vring_init_bcast(struct wil6210_priv *wil, int id, int size);
 int wil_bcast_init(struct wil6210_priv *wil);
 void wil_bcast_fini(struct wil6210_priv *wil);
diff --git a/drivers/net/wireless/ath/wil6210/wmi.c b/drivers/net/wireless/ath/wil6210/wmi.c
index e3ea74cdd4aa..e1a6cb8840ed 100644
--- a/drivers/net/wireless/ath/wil6210/wmi.c
+++ b/drivers/net/wireless/ath/wil6210/wmi.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2012-2015 Qualcomm Atheros, Inc.
+ * Copyright (c) 2012-2016 Qualcomm Atheros, Inc.
  *
  * Permission to use, copy, modify, and/or distribute this software for any
  * purpose with or without fee is hereby granted, provided that the above
@@ -426,6 +426,7 @@ static void wmi_evt_connect(struct wil6210_priv *wil, int id, void *d, int len)
 	const size_t assoc_req_ie_offset = sizeof(u16) * 2;
 	/* capinfo(u16) + status_code(u16) + associd(u16) + IEs */
 	const size_t assoc_resp_ie_offset = sizeof(u16) * 3;
+	int rc;
 
 	if (len < sizeof(*evt)) {
 		wil_err(wil, "Connect event too short : %d bytes\n", len);
@@ -445,8 +446,8 @@ static void wmi_evt_connect(struct wil6210_priv *wil, int id, void *d, int len)
 	}
 
 	ch = evt->channel + 1;
-	wil_dbg_wmi(wil, "Connect %pM channel [%d] cid %d\n",
-		    evt->bssid, ch, evt->cid);
+	wil_info(wil, "Connect %pM channel [%d] cid %d\n",
+		 evt->bssid, ch, evt->cid);
 	wil_hex_dump_wmi("connect AI : ", DUMP_PREFIX_OFFSET, 16, 1,
 			 evt->assoc_info, len - sizeof(*evt), true);
 
@@ -468,20 +469,67 @@ static void wmi_evt_connect(struct wil6210_priv *wil, int id, void *d, int len)
 		assoc_resp_ielen = 0;
 	}
 
+	mutex_lock(&wil->mutex);
+	if (test_bit(wil_status_resetting, wil->status) ||
+	    !test_bit(wil_status_fwready, wil->status)) {
+		wil_err(wil, "status_resetting, cancel connect event, CID %d\n",
+			evt->cid);
+		mutex_unlock(&wil->mutex);
+		/* no need for cleanup, wil_reset will do that */
+		return;
+	}
+
 	if ((wdev->iftype == NL80211_IFTYPE_STATION) ||
 	    (wdev->iftype == NL80211_IFTYPE_P2P_CLIENT)) {
 		if (!test_bit(wil_status_fwconnecting, wil->status)) {
 			wil_err(wil, "Not in connecting state\n");
+			mutex_unlock(&wil->mutex);
 			return;
 		}
 		del_timer_sync(&wil->connect_timer);
-		cfg80211_connect_result(ndev, evt->bssid,
-					assoc_req_ie, assoc_req_ielen,
-					assoc_resp_ie, assoc_resp_ielen,
-					WLAN_STATUS_SUCCESS, GFP_KERNEL);
+	}
+
+	/* FIXME FW can transmit only ucast frames to peer */
+	/* FIXME real ring_id instead of hard coded 0 */
+	ether_addr_copy(wil->sta[evt->cid].addr, evt->bssid);
+	wil->sta[evt->cid].status = wil_sta_conn_pending;
 
+	rc = wil_tx_init(wil, evt->cid);
+	if (rc) {
+		wil_err(wil, "%s: config tx vring failed for CID %d, rc (%d)\n",
+			__func__, evt->cid, rc);
+		wmi_disconnect_sta(wil, wil->sta[evt->cid].addr,
+				   WLAN_REASON_UNSPECIFIED, false);
+	} else {
+		wil_info(wil, "%s: successful connection to CID %d\n",
+			 __func__, evt->cid);
+	}
+
+	if ((wdev->iftype == NL80211_IFTYPE_STATION) ||
+	    (wdev->iftype == NL80211_IFTYPE_P2P_CLIENT)) {
+		if (rc) {
+			netif_tx_stop_all_queues(ndev);
+			netif_carrier_off(ndev);
+			wil_err(wil,
+				"%s: cfg80211_connect_result with failure\n",
+				__func__);
+			cfg80211_connect_result(ndev, evt->bssid, NULL, 0,
+						NULL, 0,
+						WLAN_STATUS_UNSPECIFIED_FAILURE,
+						GFP_KERNEL);
+			goto out;
+		} else {
+			cfg80211_connect_result(ndev, evt->bssid,
+						assoc_req_ie, assoc_req_ielen,
+						assoc_resp_ie, assoc_resp_ielen,
+						WLAN_STATUS_SUCCESS,
+						GFP_KERNEL);
+		}
 	} else if ((wdev->iftype == NL80211_IFTYPE_AP) ||
 		   (wdev->iftype == NL80211_IFTYPE_P2P_GO)) {
+		if (rc)
+			goto out;
+
 		memset(&sinfo, 0, sizeof(sinfo));
 
 		sinfo.generation = wil->sinfo_gen++;
@@ -492,17 +540,21 @@ static void wmi_evt_connect(struct wil6210_priv *wil, int id, void *d, int len)
 		}
 
 		cfg80211_new_sta(ndev, evt->bssid, &sinfo, GFP_KERNEL);
+	} else {
+		wil_err(wil, "%s: unhandled iftype %d for CID %d\n",
+			__func__, wdev->iftype, evt->cid);
+		goto out;
 	}
-	clear_bit(wil_status_fwconnecting, wil->status);
-	set_bit(wil_status_fwconnected, wil->status);
 
-	/* FIXME FW can transmit only ucast frames to peer */
-	/* FIXME real ring_id instead of hard coded 0 */
-	ether_addr_copy(wil->sta[evt->cid].addr, evt->bssid);
-	wil->sta[evt->cid].status = wil_sta_conn_pending;
+	wil->sta[evt->cid].status = wil_sta_connected;
+	set_bit(wil_status_fwconnected, wil->status);
+	netif_tx_wake_all_queues(ndev);
 
-	wil->pending_connect_cid = evt->cid;
-	queue_work(wil->wq_service, &wil->connect_worker);
+out:
+	if (rc)
+		wil->sta[evt->cid].status = wil_sta_unused;
+	clear_bit(wil_status_fwconnecting, wil->status);
+	mutex_unlock(&wil->mutex);
 }
 
 static void wmi_evt_disconnect(struct wil6210_priv *wil, int id,
@@ -511,8 +563,8 @@ static void wmi_evt_disconnect(struct wil6210_priv *wil, int id,
 	struct wmi_disconnect_event *evt = d;
 	u16 reason_code = le16_to_cpu(evt->protocol_reason_status);
 
-	wil_dbg_wmi(wil, "Disconnect %pM reason [proto %d wmi %d]\n",
-		    evt->bssid, reason_code, evt->disconnect_reason);
+	wil_info(wil, "Disconnect %pM reason [proto %d wmi %d]\n",
+		 evt->bssid, reason_code, evt->disconnect_reason);
 
 	wil->sinfo_gen++;
 
@@ -727,6 +779,7 @@ void wmi_recv_cmd(struct wil6210_priv *wil)
 	void __iomem *src;
 	ulong flags;
 	unsigned n;
+	unsigned int num_immed_reply = 0;
 
 	if (!test_bit(wil_status_mbox_ready, wil->status)) {
 		wil_err(wil, "Reset in progress. Cannot handle WMI event\n");
@@ -736,6 +789,7 @@ void wmi_recv_cmd(struct wil6210_priv *wil)
 	for (n = 0;; n++) {
 		u16 len;
 		bool q;
+		bool immed_reply = false;
 
 		r->head = wil_r(wil, RGF_MBOX +
 				offsetof(struct wil6210_mbox_ctl, rx.head));
@@ -784,6 +838,13 @@ void wmi_recv_cmd(struct wil6210_priv *wil)
 			struct wil6210_mbox_hdr_wmi *wmi = &evt->event.wmi;
 			u16 id = le16_to_cpu(wmi->id);
 			u32 tstamp = le32_to_cpu(wmi->timestamp);
+			if (wil->reply_id && wil->reply_id == id) {
+				if (wil->reply_buf) {
+					memcpy(wil->reply_buf, wmi,
+					       min(len, wil->reply_size));
+					immed_reply = true;
+				}
+			}
 
 			wil_dbg_wmi(wil, "WMI event 0x%04x MID %d @%d msec\n",
 				    id, wmi->mid, tstamp);
@@ -799,15 +860,24 @@ void wmi_recv_cmd(struct wil6210_priv *wil)
 		wil_w(wil, RGF_MBOX +
 		      offsetof(struct wil6210_mbox_ctl, rx.tail), r->tail);
 
-		/* add to the pending list */
-		spin_lock_irqsave(&wil->wmi_ev_lock, flags);
-		list_add_tail(&evt->list, &wil->pending_wmi_ev);
-		spin_unlock_irqrestore(&wil->wmi_ev_lock, flags);
-		q = queue_work(wil->wmi_wq, &wil->wmi_event_worker);
-		wil_dbg_wmi(wil, "queue_work -> %d\n", q);
+		if (immed_reply) {
+			wil_dbg_wmi(wil, "%s: Complete WMI 0x%04x\n",
+				    __func__, wil->reply_id);
+			kfree(evt);
+			num_immed_reply++;
+			complete(&wil->wmi_call);
+		} else {
+			/* add to the pending list */
+			spin_lock_irqsave(&wil->wmi_ev_lock, flags);
+			list_add_tail(&evt->list, &wil->pending_wmi_ev);
+			spin_unlock_irqrestore(&wil->wmi_ev_lock, flags);
+			q = queue_work(wil->wmi_wq, &wil->wmi_event_worker);
+			wil_dbg_wmi(wil, "queue_work -> %d\n", q);
+		}
 	}
 	/* normally, 1 event per IRQ should be processed */
-	wil_dbg_wmi(wil, "%s -> %d events queued\n", __func__, n);
+	wil_dbg_wmi(wil, "%s -> %d events queued, %d completed\n", __func__,
+		    n - num_immed_reply, num_immed_reply);
 }
 
 int wmi_call(struct wil6210_priv *wil, u16 cmdid, void *buf, u16 len,
@@ -1184,7 +1254,8 @@ int wmi_get_temperature(struct wil6210_priv *wil, u32 *t_bb, u32 *t_rf)
 	return 0;
 }
 
-int wmi_disconnect_sta(struct wil6210_priv *wil, const u8 *mac, u16 reason)
+int wmi_disconnect_sta(struct wil6210_priv *wil, const u8 *mac, u16 reason,
+		       bool full_disconnect)
 {
 	int rc;
 	u16 reason_code;
@@ -1208,19 +1279,20 @@ int wmi_disconnect_sta(struct wil6210_priv *wil, const u8 *mac, u16 reason)
 		return rc;
 	}
 
-	/* call event handler manually after processing wmi_call,
-	 * to avoid deadlock - disconnect event handler acquires wil->mutex
-	 * while it is already held here
-	 */
-	reason_code = le16_to_cpu(reply.evt.protocol_reason_status);
-
-	wil_dbg_wmi(wil, "Disconnect %pM reason [proto %d wmi %d]\n",
-		    reply.evt.bssid, reason_code,
-		    reply.evt.disconnect_reason);
+	if (full_disconnect) {
+		/* call event handler manually after processing wmi_call,
+		 * to avoid deadlock - disconnect event handler acquires
+		 * wil->mutex while it is already held here
+		 */
+		reason_code = le16_to_cpu(reply.evt.protocol_reason_status);
 
-	wil->sinfo_gen++;
-	wil6210_disconnect(wil, reply.evt.bssid, reason_code, true);
+		wil_dbg_wmi(wil, "Disconnect %pM reason [proto %d wmi %d]\n",
+			    reply.evt.bssid, reason_code,
+			    reply.evt.disconnect_reason);
 
+		wil->sinfo_gen++;
+		wil6210_disconnect(wil, reply.evt.bssid, reason_code, true);
+	}
 	return 0;
 }
 
@@ -1348,14 +1420,11 @@ static void wmi_event_handle(struct wil6210_priv *wil,
 			    id, wil->reply_id);
 		/* check if someone waits for this event */
 		if (wil->reply_id && wil->reply_id == id) {
-			if (wil->reply_buf) {
-				memcpy(wil->reply_buf, wmi,
-				       min(len, wil->reply_size));
-			} else {
-				wmi_evt_call_handler(wil, id, evt_data,
-						     len - sizeof(*wmi));
-			}
-			wil_dbg_wmi(wil, "Complete WMI 0x%04x\n", id);
+			WARN_ON(wil->reply_buf);
+			wmi_evt_call_handler(wil, id, evt_data,
+					     len - sizeof(*wmi));
+			wil_dbg_wmi(wil, "%s: Complete WMI 0x%04x\n",
+				    __func__, id);
 			complete(&wil->wmi_call);
 			return;
 		}
-- 
cgit v1.2.3


From 424aecaa797901708e7f260b642d27b077cdb491 Mon Sep 17 00:00:00 2001
From: Felix Fietkau <nbd@openwrt.org>
Date: Thu, 14 Jan 2016 03:15:13 +0100
Subject: ath9k_hw: add low power tx gain table for AR953x

Used in some newer TP-Link AR9533 devices.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath9k/ar9003_hw.c       |  3 ++
 drivers/net/wireless/ath/ath9k/ar953x_initvals.h | 65 ++++++++++++++++++++++++
 2 files changed, 68 insertions(+)

diff --git a/drivers/net/wireless/ath/ath9k/ar9003_hw.c b/drivers/net/wireless/ath/ath9k/ar9003_hw.c
index 8b238c15916d..2fe12b0de5b4 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_hw.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_hw.c
@@ -698,6 +698,9 @@ static void ar9003_tx_gain_table_mode2(struct ath_hw *ah)
 	else if (AR_SREV_9340(ah))
 		INIT_INI_ARRAY(&ah->iniModesTxGain,
 			ar9340Modes_low_ob_db_tx_gain_table_1p0);
+	else if (AR_SREV_9531_11(ah))
+		INIT_INI_ARRAY(&ah->iniModesTxGain,
+			       qca953x_1p1_modes_no_xpa_low_power_tx_gain_table);
 	else if (AR_SREV_9485_11_OR_LATER(ah))
 		INIT_INI_ARRAY(&ah->iniModesTxGain,
 			ar9485Modes_low_ob_db_tx_gain_1_1);
diff --git a/drivers/net/wireless/ath/ath9k/ar953x_initvals.h b/drivers/net/wireless/ath/ath9k/ar953x_initvals.h
index 6fc0d07e5ec6..c0b90daa3e3d 100644
--- a/drivers/net/wireless/ath/ath9k/ar953x_initvals.h
+++ b/drivers/net/wireless/ath/ath9k/ar953x_initvals.h
@@ -757,6 +757,71 @@ static const u32 qca953x_1p1_modes_xpa_tx_gain_table[][2] = {
 	{0x00016448, 0x6c927a70},
 };
 
+static const u32 qca953x_1p1_modes_no_xpa_low_power_tx_gain_table[][2] = {
+	/* Addr      allmodes  */
+	{0x0000a2dc, 0xfff55592},
+	{0x0000a2e0, 0xfff99924},
+	{0x0000a2e4, 0xfffe1e00},
+	{0x0000a2e8, 0xffffe000},
+	{0x0000a410, 0x000050d6},
+	{0x0000a500, 0x00000069},
+	{0x0000a504, 0x0400006b},
+	{0x0000a508, 0x0800006d},
+	{0x0000a50c, 0x0c000269},
+	{0x0000a510, 0x1000026b},
+	{0x0000a514, 0x1400026d},
+	{0x0000a518, 0x18000669},
+	{0x0000a51c, 0x1c00066b},
+	{0x0000a520, 0x1d000a68},
+	{0x0000a524, 0x21000a6a},
+	{0x0000a528, 0x25000a6c},
+	{0x0000a52c, 0x29000a6e},
+	{0x0000a530, 0x2d0012a9},
+	{0x0000a534, 0x310012ab},
+	{0x0000a538, 0x350012ad},
+	{0x0000a53c, 0x39001b0a},
+	{0x0000a540, 0x3d001b0c},
+	{0x0000a544, 0x41001b0e},
+	{0x0000a548, 0x43001bae},
+	{0x0000a54c, 0x45001914},
+	{0x0000a550, 0x47001916},
+	{0x0000a554, 0x49001b96},
+	{0x0000a558, 0x49001b96},
+	{0x0000a55c, 0x49001b96},
+	{0x0000a560, 0x49001b96},
+	{0x0000a564, 0x49001b96},
+	{0x0000a568, 0x49001b96},
+	{0x0000a56c, 0x49001b96},
+	{0x0000a570, 0x49001b96},
+	{0x0000a574, 0x49001b96},
+	{0x0000a578, 0x49001b96},
+	{0x0000a57c, 0x49001b96},
+	{0x0000a600, 0x00000000},
+	{0x0000a604, 0x00000000},
+	{0x0000a608, 0x00000000},
+	{0x0000a60c, 0x00000000},
+	{0x0000a610, 0x00000000},
+	{0x0000a614, 0x00000000},
+	{0x0000a618, 0x00804201},
+	{0x0000a61c, 0x01408201},
+	{0x0000a620, 0x01408502},
+	{0x0000a624, 0x01408502},
+	{0x0000a628, 0x01408502},
+	{0x0000a62c, 0x01408502},
+	{0x0000a630, 0x01408502},
+	{0x0000a634, 0x01408502},
+	{0x0000a638, 0x01408502},
+	{0x0000a63c, 0x01408502},
+	{0x0000b2dc, 0xfff55592},
+	{0x0000b2e0, 0xfff99924},
+	{0x0000b2e4, 0xfffe1e00},
+	{0x0000b2e8, 0xffffe000},
+	{0x00016044, 0x044922db},
+	{0x00016048, 0x6c927a70},
+	{0x00016444, 0x044922db},
+	{0x00016448, 0x6c927a70},
+};
+
 static const u32 qca953x_2p0_baseband_core[][2] = {
 	/* Addr      allmodes  */
 	{0x00009800, 0xafe68e30},
-- 
cgit v1.2.3


From 344cd850b55e9dfd4f3ec1ba564f8edbc8136aca Mon Sep 17 00:00:00 2001
From: Geert Uytterhoeven <geert@linux-m68k.org>
Date: Fri, 15 Jan 2016 14:41:30 +0100
Subject: ath9k: Drop useless const on chanctx_event_delta() return type

drivers/net/wireless/ath/ath9k/channel.c:230: warning: type qualifiers ignored on function return type

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath9k/channel.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/ath/ath9k/channel.c b/drivers/net/wireless/ath/ath9k/channel.c
index 0bcb82abd094..319cb5f25f58 100644
--- a/drivers/net/wireless/ath/ath9k/channel.c
+++ b/drivers/net/wireless/ath/ath9k/channel.c
@@ -226,7 +226,7 @@ static const char *chanctx_state_string(enum ath_chanctx_state state)
 	}
 }
 
-static const u32 chanctx_event_delta(struct ath_softc *sc)
+static u32 chanctx_event_delta(struct ath_softc *sc)
 {
 	u64 ms;
 	struct timespec ts, *old;
-- 
cgit v1.2.3


From c1cab1df9b651d999922e0f04d01dc046121a237 Mon Sep 17 00:00:00 2001
From: Miaoqing Pan <miaoqing@codeaurora.org>
Date: Mon, 18 Jan 2016 09:33:46 +0800
Subject: ath9k: avoid ANI restart if no trigger

Fixes commit 54da20d83f0e ("ath9k_hw: improve ANI processing and rx desensitizing parameters")

Call ath9k_ani_restart() only when the phy error rate reach the
ANI immunity threshold. Sync the logic with internal code base.

Signed-off-by: Miaoqing Pan <miaoqing@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath9k/ani.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/ath/ath9k/ani.c b/drivers/net/wireless/ath/ath9k/ani.c
index 25e45e4d1a60..aa82e1326fff 100644
--- a/drivers/net/wireless/ath/ath9k/ani.c
+++ b/drivers/net/wireless/ath/ath9k/ani.c
@@ -450,7 +450,9 @@ void ath9k_hw_ani_monitor(struct ath_hw *ah, struct ath9k_channel *chan)
 		} else if (cckPhyErrRate > ah->config.cck_trig_high) {
 			ath9k_hw_ani_cck_err_trigger(ah);
 			aniState->ofdmsTurn = true;
-		}
+		} else
+			return;
+			
 		ath9k_ani_restart(ah);
 	}
 }
-- 
cgit v1.2.3


From 66b533d5adb3eb0cd111b07e516ab13a47ed34f5 Mon Sep 17 00:00:00 2001
From: Miaoqing Pan <miaoqing@codeaurora.org>
Date: Mon, 18 Jan 2016 09:33:47 +0800
Subject: ath9k: clean up ANI per-channel pointer checking

commit c24bd3620c50 ("ath9k: Do not maintain ANI state per-channel")
removed per-channel handling, the code to check 'curchan' also
should be removed as never used.

Signed-off-by: Miaoqing Pan <miaoqing@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath9k/ani.c | 32 ++++++--------------------------
 1 file changed, 6 insertions(+), 26 deletions(-)

diff --git a/drivers/net/wireless/ath/ath9k/ani.c b/drivers/net/wireless/ath/ath9k/ani.c
index aa82e1326fff..815efe9fd208 100644
--- a/drivers/net/wireless/ath/ath9k/ani.c
+++ b/drivers/net/wireless/ath/ath9k/ani.c
@@ -126,12 +126,8 @@ static void ath9k_hw_update_mibstats(struct ath_hw *ah,
 
 static void ath9k_ani_restart(struct ath_hw *ah)
 {
-	struct ar5416AniState *aniState;
-
-	if (!ah->curchan)
-		return;
+	struct ar5416AniState *aniState = &ah->ani;
 
-	aniState = &ah->ani;
 	aniState->listenTime = 0;
 
 	ENABLE_REGWRITE_BUFFER(ah);
@@ -221,12 +217,7 @@ static void ath9k_hw_set_ofdm_nil(struct ath_hw *ah, u8 immunityLevel,
 
 static void ath9k_hw_ani_ofdm_err_trigger(struct ath_hw *ah)
 {
-	struct ar5416AniState *aniState;
-
-	if (!ah->curchan)
-		return;
-
-	aniState = &ah->ani;
+	struct ar5416AniState *aniState = &ah->ani;
 
 	if (aniState->ofdmNoiseImmunityLevel < ATH9K_ANI_OFDM_MAX_LEVEL)
 		ath9k_hw_set_ofdm_nil(ah, aniState->ofdmNoiseImmunityLevel + 1, false);
@@ -281,12 +272,7 @@ static void ath9k_hw_set_cck_nil(struct ath_hw *ah, u_int8_t immunityLevel,
 
 static void ath9k_hw_ani_cck_err_trigger(struct ath_hw *ah)
 {
-	struct ar5416AniState *aniState;
-
-	if (!ah->curchan)
-		return;
-
-	aniState = &ah->ani;
+	struct ar5416AniState *aniState = &ah->ani;
 
 	if (aniState->cckNoiseImmunityLevel < ATH9K_ANI_CCK_MAX_LEVEL)
 		ath9k_hw_set_cck_nil(ah, aniState->cckNoiseImmunityLevel + 1,
@@ -299,9 +285,7 @@ static void ath9k_hw_ani_cck_err_trigger(struct ath_hw *ah)
  */
 static void ath9k_hw_ani_lower_immunity(struct ath_hw *ah)
 {
-	struct ar5416AniState *aniState;
-
-	aniState = &ah->ani;
+	struct ar5416AniState *aniState = &ah->ani;
 
 	/* lower OFDM noise immunity */
 	if (aniState->ofdmNoiseImmunityLevel > 0 &&
@@ -329,7 +313,7 @@ void ath9k_ani_reset(struct ath_hw *ah, bool is_scanning)
 	struct ath_common *common = ath9k_hw_common(ah);
 	int ofdm_nil, cck_nil;
 
-	if (!ah->curchan)
+	if (!chan)
 		return;
 
 	BUG_ON(aniState == NULL);
@@ -416,14 +400,10 @@ static bool ath9k_hw_ani_read_counters(struct ath_hw *ah)
 
 void ath9k_hw_ani_monitor(struct ath_hw *ah, struct ath9k_channel *chan)
 {
-	struct ar5416AniState *aniState;
+	struct ar5416AniState *aniState = &ah->ani;
 	struct ath_common *common = ath9k_hw_common(ah);
 	u32 ofdmPhyErrRate, cckPhyErrRate;
 
-	if (!ah->curchan)
-		return;
-
-	aniState = &ah->ani;
 	if (!ath9k_hw_ani_read_counters(ah))
 		return;
 
-- 
cgit v1.2.3


From 3f6cc4e57d304f552abc2bdba716519c5e18b442 Mon Sep 17 00:00:00 2001
From: Miaoqing Pan <miaoqing@codeaurora.org>
Date: Mon, 18 Jan 2016 09:33:48 +0800
Subject: ath9k: do not reset while BB panic(0x4000409) on ar9561

BB panic(0x4000409) observed while AP enabling/disabling
bursting.

Signed-off-by: Miaoqing Pan <miaoqing@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath9k/ar9003_phy.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/ath/ath9k/ar9003_phy.c b/drivers/net/wireless/ath/ath9k/ar9003_phy.c
index 201425e7f9cb..abd964691d8c 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_phy.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_phy.c
@@ -2071,7 +2071,8 @@ void ar9003_hw_attach_phy_ops(struct ath_hw *ah)
  *             to be disabled.
  *
  * 0x04000409: Packet stuck on receive.
- *             Full chip reset is required for all chips except AR9340.
+ *             Full chip reset is required for all chips except
+ *	       AR9340, AR9531 and AR9561.
  */
 
 /*
@@ -2100,7 +2101,7 @@ bool ar9003_hw_bb_watchdog_check(struct ath_hw *ah)
 	case 0x04000b09:
 		return true;
 	case 0x04000409:
-		if (AR_SREV_9340(ah) || AR_SREV_9531(ah))
+		if (AR_SREV_9340(ah) || AR_SREV_9531(ah) || AR_SREV_9561(ah))
 			return false;
 		else
 			return true;
-- 
cgit v1.2.3


From 1542bc37842d5d51e4aa71286a08be9615eba884 Mon Sep 17 00:00:00 2001
From: Miaoqing Pan <miaoqing@codeaurora.org>
Date: Mon, 18 Jan 2016 09:33:49 +0800
Subject: ath9k: fix inconsistent use of tab and space in indentation

Minor changes for indenting.

Signed-off-by: Miaoqing Pan <miaoqing@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath9k/ar9003_eeprom.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
index 8b4561e8ce1a..54ed2f72d35e 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
@@ -5485,11 +5485,11 @@ unsigned int ar9003_get_paprd_scale_factor(struct ath_hw *ah,
 			  AR9300_PAPRD_SCALE_1);
 	else {
 		if (chan->channel >= 5700)
-		return MS(le32_to_cpu(eep->modalHeader5G.papdRateMaskHt20),
-			  AR9300_PAPRD_SCALE_1);
+			return MS(le32_to_cpu(eep->modalHeader5G.papdRateMaskHt20),
+				  AR9300_PAPRD_SCALE_1);
 		else if (chan->channel >= 5400)
 			return MS(le32_to_cpu(eep->modalHeader5G.papdRateMaskHt40),
-				   AR9300_PAPRD_SCALE_2);
+				  AR9300_PAPRD_SCALE_2);
 		else
 			return MS(le32_to_cpu(eep->modalHeader5G.papdRateMaskHt40),
 				  AR9300_PAPRD_SCALE_1);
-- 
cgit v1.2.3


From 466b0f0208508b08eb59907fac0958d6da7fa3e2 Mon Sep 17 00:00:00 2001
From: Miaoqing Pan <miaoqing@codeaurora.org>
Date: Mon, 18 Jan 2016 09:33:50 +0800
Subject: ath9k: fix data bus error on ar9300 and ar9580

One crash issue be found on ar9300: RTC_RC reg read leads crash, leading
the data bus error, due to RTC_RC reg write not happen properly.

Warm Reset trigger in continuous beacon stuck for one of the customer for
other chip, noticed the MAC was stuck in RTC reset. After analysis noticed
DMA did not complete when RTC was put in reset.

So, before resetting the MAC need to make sure there are no pending DMA
transactions because this reset does not reset all parts of the chip.

The 12th and 11th bit of MAC _DMA_CFG register used to do that.
	12 cfg_halt_ack 0x0
		0 DMA has not yet halted
		1 DMA has halted
	11 cfg_halt_req 0x0
		0 DMA logic operates normally
		1 Request DMA logic to stop so software can reset the MAC

The Bit [12] of this register indicates when the halt has taken effect or
not. the DMA halt IS NOT recoverable; once software sets bit [11] to
request a DMA halt, software must wait for bit [12] to be set and reset
the MAC.

So, the same thing we implemented for ar9580 chip.

Signed-off-by: Miaoqing Pan <miaoqing@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath9k/hw.c  | 10 ++++++++++
 drivers/net/wireless/ath/ath9k/reg.h |  4 +++-
 2 files changed, 13 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c
index 257f46ed4a04..e7a31016f370 100644
--- a/drivers/net/wireless/ath/ath9k/hw.c
+++ b/drivers/net/wireless/ath/ath9k/hw.c
@@ -1368,6 +1368,16 @@ static bool ath9k_hw_set_reset(struct ath_hw *ah, int type)
 	if (ath9k_hw_mci_is_enabled(ah))
 		ar9003_mci_check_gpm_offset(ah);
 
+	/* DMA HALT added to resolve ar9300 and ar9580 bus error during
+	 * RTC_RC reg read
+	 */
+	if (AR_SREV_9300(ah) || AR_SREV_9580(ah)) {
+		REG_SET_BIT(ah, AR_CFG, AR_CFG_HALT_REQ);
+		ath9k_hw_wait(ah, AR_CFG, AR_CFG_HALT_ACK, AR_CFG_HALT_ACK,
+			      20 * AH_WAIT_TIMEOUT);
+		REG_CLR_BIT(ah, AR_CFG, AR_CFG_HALT_REQ);
+	}
+
 	REG_WRITE(ah, AR_RTC_RC, rst_flags);
 
 	REGWRITE_BUFFER_FLUSH(ah);
diff --git a/drivers/net/wireless/ath/ath9k/reg.h b/drivers/net/wireless/ath/ath9k/reg.h
index caba54ddad25..c8d35febaf0f 100644
--- a/drivers/net/wireless/ath/ath9k/reg.h
+++ b/drivers/net/wireless/ath/ath9k/reg.h
@@ -34,8 +34,10 @@
 #define AR_CFG_SWRG          0x00000010
 #define AR_CFG_AP_ADHOC_INDICATION 0x00000020
 #define AR_CFG_PHOK          0x00000100
-#define AR_CFG_CLK_GATE_DIS  0x00000400
 #define AR_CFG_EEBS          0x00000200
+#define AR_CFG_CLK_GATE_DIS  0x00000400
+#define AR_CFG_HALT_REQ	     0x00000800
+#define AR_CFG_HALT_ACK	     0x00001000
 #define AR_CFG_PCI_MASTER_REQ_Q_THRESH         0x00060000
 #define AR_CFG_PCI_MASTER_REQ_Q_THRESH_S       17
 
-- 
cgit v1.2.3


From df94e702277e14889af5eef5fbfc3a33261c8b33 Mon Sep 17 00:00:00 2001
From: Michal Kazior <michal.kazior@tieto.com>
Date: Thu, 21 Jan 2016 14:13:23 +0100
Subject: ath10k: rename some HTT events

New names make a bit more sense.

Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/htt.c    | 8 ++++----
 drivers/net/wireless/ath/ath10k/htt.h    | 8 ++++----
 drivers/net/wireless/ath/ath10k/htt_rx.c | 4 ++--
 3 files changed, 10 insertions(+), 10 deletions(-)

diff --git a/drivers/net/wireless/ath/ath10k/htt.c b/drivers/net/wireless/ath/ath10k/htt.c
index 3e6ba63dfdff..7561f22f10f9 100644
--- a/drivers/net/wireless/ath/ath10k/htt.c
+++ b/drivers/net/wireless/ath/ath10k/htt.c
@@ -131,12 +131,12 @@ static const enum htt_t2h_msg_type htt_10_4_t2h_msg_types[] = {
 	[HTT_10_4_T2H_MSG_TYPE_AGGR_CONF] = HTT_T2H_MSG_TYPE_AGGR_CONF,
 	[HTT_10_4_T2H_MSG_TYPE_TX_FETCH_IND] =
 				HTT_T2H_MSG_TYPE_TX_FETCH_IND,
-	[HTT_10_4_T2H_MSG_TYPE_TX_FETCH_CONF] =
-				HTT_T2H_MSG_TYPE_TX_FETCH_CONF,
+	[HTT_10_4_T2H_MSG_TYPE_TX_FETCH_CONFIRM] =
+				HTT_T2H_MSG_TYPE_TX_FETCH_CONFIRM,
 	[HTT_10_4_T2H_MSG_TYPE_STATS_NOUPLOAD] =
 				HTT_T2H_MSG_TYPE_STATS_NOUPLOAD,
-	[HTT_10_4_T2H_MSG_TYPE_TX_LOW_LATENCY_IND] =
-				HTT_T2H_MSG_TYPE_TX_LOW_LATENCY_IND,
+	[HTT_10_4_T2H_MSG_TYPE_TX_MODE_SWITCH_IND] =
+				HTT_T2H_MSG_TYPE_TX_MODE_SWITCH_IND,
 };
 
 int ath10k_htt_connect(struct ath10k_htt *htt)
diff --git a/drivers/net/wireless/ath/ath10k/htt.h b/drivers/net/wireless/ath/ath10k/htt.h
index 47ca048feaf0..edd3b9070de9 100644
--- a/drivers/net/wireless/ath/ath10k/htt.h
+++ b/drivers/net/wireless/ath/ath10k/htt.h
@@ -413,10 +413,10 @@ enum htt_10_4_t2h_msg_type {
 	HTT_10_4_T2H_MSG_TYPE_EN_STATS               = 0x14,
 	HTT_10_4_T2H_MSG_TYPE_AGGR_CONF              = 0x15,
 	HTT_10_4_T2H_MSG_TYPE_TX_FETCH_IND           = 0x16,
-	HTT_10_4_T2H_MSG_TYPE_TX_FETCH_CONF          = 0x17,
+	HTT_10_4_T2H_MSG_TYPE_TX_FETCH_CONFIRM       = 0x17,
 	HTT_10_4_T2H_MSG_TYPE_STATS_NOUPLOAD         = 0x18,
 	/* 0x19 to 0x2f are reserved */
-	HTT_10_4_T2H_MSG_TYPE_TX_LOW_LATENCY_IND     = 0x30,
+	HTT_10_4_T2H_MSG_TYPE_TX_MODE_SWITCH_IND     = 0x30,
 	/* keep this last */
 	HTT_10_4_T2H_NUM_MSGS
 };
@@ -449,8 +449,8 @@ enum htt_t2h_msg_type {
 	HTT_T2H_MSG_TYPE_TEST,
 	HTT_T2H_MSG_TYPE_EN_STATS,
 	HTT_T2H_MSG_TYPE_TX_FETCH_IND,
-	HTT_T2H_MSG_TYPE_TX_FETCH_CONF,
-	HTT_T2H_MSG_TYPE_TX_LOW_LATENCY_IND,
+	HTT_T2H_MSG_TYPE_TX_FETCH_CONFIRM,
+	HTT_T2H_MSG_TYPE_TX_MODE_SWITCH_IND,
 	/* keep this last */
 	HTT_T2H_NUM_MSGS
 };
diff --git a/drivers/net/wireless/ath/ath10k/htt_rx.c b/drivers/net/wireless/ath/ath10k/htt_rx.c
index 3079434b5d9b..84abe4f25c73 100644
--- a/drivers/net/wireless/ath/ath10k/htt_rx.c
+++ b/drivers/net/wireless/ath/ath10k/htt_rx.c
@@ -2125,8 +2125,8 @@ void ath10k_htt_t2h_msg_handler(struct ath10k *ar, struct sk_buff *skb)
 		break;
 	case HTT_T2H_MSG_TYPE_EN_STATS:
 	case HTT_T2H_MSG_TYPE_TX_FETCH_IND:
-	case HTT_T2H_MSG_TYPE_TX_FETCH_CONF:
-	case HTT_T2H_MSG_TYPE_TX_LOW_LATENCY_IND:
+	case HTT_T2H_MSG_TYPE_TX_FETCH_CONFIRM:
+	case HTT_T2H_MSG_TYPE_TX_MODE_SWITCH_IND:
 	default:
 		ath10k_warn(ar, "htt event (%d) not handled\n",
 			    resp->hdr.msg_type);
-- 
cgit v1.2.3


From 22e6b3bc5d9668dc711665d255efad89c527b4d6 Mon Sep 17 00:00:00 2001
From: Michal Kazior <michal.kazior@tieto.com>
Date: Thu, 21 Jan 2016 14:13:24 +0100
Subject: ath10k: add new htt definitions

These definitions are associated with some
improvements upcomming for 10.4 and QCA99X0.

Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/htt.h | 153 +++++++++++++++++++++++++++++++++-
 1 file changed, 150 insertions(+), 3 deletions(-)

diff --git a/drivers/net/wireless/ath/ath10k/htt.h b/drivers/net/wireless/ath/ath10k/htt.h
index edd3b9070de9..0c5628dafabf 100644
--- a/drivers/net/wireless/ath/ath10k/htt.h
+++ b/drivers/net/wireless/ath/ath10k/htt.h
@@ -52,6 +52,7 @@ enum htt_h2t_msg_type { /* host-to-target */
 	/* This command is used for sending management frames in HTT < 3.0.
 	 * HTT >= 3.0 uses TX_FRM for everything. */
 	HTT_H2T_MSG_TYPE_MGMT_TX            = 7,
+	HTT_H2T_MSG_TYPE_TX_FETCH_RESP      = 11,
 
 	HTT_H2T_NUM_MSGS /* keep this last */
 };
@@ -1306,9 +1307,43 @@ struct htt_frag_desc_bank_id {
  * so we use a conservatively safe value for now */
 #define HTT_FRAG_DESC_BANK_MAX 4
 
-#define HTT_FRAG_DESC_BANK_CFG_INFO_PDEV_ID_MASK 0x03
-#define HTT_FRAG_DESC_BANK_CFG_INFO_PDEV_ID_LSB  0
-#define HTT_FRAG_DESC_BANK_CFG_INFO_SWAP         (1 << 2)
+#define HTT_FRAG_DESC_BANK_CFG_INFO_PDEV_ID_MASK		0x03
+#define HTT_FRAG_DESC_BANK_CFG_INFO_PDEV_ID_LSB			0
+#define HTT_FRAG_DESC_BANK_CFG_INFO_SWAP			BIT(2)
+#define HTT_FRAG_DESC_BANK_CFG_INFO_Q_STATE_VALID		BIT(3)
+#define HTT_FRAG_DESC_BANK_CFG_INFO_Q_STATE_DEPTH_TYPE_MASK	BIT(4)
+#define HTT_FRAG_DESC_BANK_CFG_INFO_Q_STATE_DEPTH_TYPE_LSB	4
+
+enum htt_q_depth_type {
+	HTT_Q_DEPTH_TYPE_BYTES = 0,
+	HTT_Q_DEPTH_TYPE_MSDUS = 1,
+};
+
+#define HTT_TX_Q_STATE_NUM_PEERS		(TARGET_10_4_NUM_QCACHE_PEERS_MAX + \
+						 TARGET_10_4_NUM_VDEVS)
+#define HTT_TX_Q_STATE_NUM_TIDS			8
+#define HTT_TX_Q_STATE_ENTRY_SIZE		1
+#define HTT_TX_Q_STATE_ENTRY_MULTIPLIER		0
+
+/**
+ * htt_q_state_conf - part of htt_frag_desc_bank_cfg for host q state config
+ *
+ * Defines host q state format and behavior. See htt_q_state.
+ *
+ * @record_size: Defines the size of each host q entry in bytes. In practice
+ *	however firmware (at least 10.4.3-00191) ignores this host
+ *	configuration value and uses hardcoded value of 1.
+ * @record_multiplier: This is valid only when q depth type is MSDUs. It
+ *	defines the exponent for the power of 2 multiplication.
+ */
+struct htt_q_state_conf {
+	__le32 paddr;
+	__le16 num_peers;
+	__le16 num_tids;
+	u8 record_size;
+	u8 record_multiplier;
+	u8 pad[2];
+} __packed;
 
 struct htt_frag_desc_bank_cfg {
 	u8 info; /* HTT_FRAG_DESC_BANK_CFG_INFO_ */
@@ -1316,6 +1351,114 @@ struct htt_frag_desc_bank_cfg {
 	u8 desc_size;
 	__le32 bank_base_addrs[HTT_FRAG_DESC_BANK_MAX];
 	struct htt_frag_desc_bank_id bank_id[HTT_FRAG_DESC_BANK_MAX];
+	struct htt_q_state_conf q_state;
+} __packed;
+
+#define HTT_TX_Q_STATE_ENTRY_COEFFICIENT	128
+#define HTT_TX_Q_STATE_ENTRY_FACTOR_MASK	0x3f
+#define HTT_TX_Q_STATE_ENTRY_FACTOR_LSB		0
+#define HTT_TX_Q_STATE_ENTRY_EXP_MASK		0xc0
+#define HTT_TX_Q_STATE_ENTRY_EXP_LSB		6
+
+/**
+ * htt_q_state - shared between host and firmware via DMA
+ *
+ * This structure is used for the host to expose it's software queue state to
+ * firmware so that its rate control can schedule fetch requests for optimized
+ * performance. This is most notably used for MU-MIMO aggregation when multiple
+ * MU clients are connected.
+ *
+ * @count: Each element defines the host queue depth. When q depth type was
+ *	configured as HTT_Q_DEPTH_TYPE_BYTES then each entry is defined as:
+ *	FACTOR * 128 * 8^EXP (see HTT_TX_Q_STATE_ENTRY_FACTOR_MASK and
+ *	HTT_TX_Q_STATE_ENTRY_EXP_MASK). When q depth type was configured as
+ *	HTT_Q_DEPTH_TYPE_MSDUS the number of packets is scaled by 2 **
+ *	record_multiplier (see htt_q_state_conf).
+ * @map: Used by firmware to quickly check which host queues are not empty. It
+ *	is a bitmap simply saying.
+ * @seq: Used by firmware to quickly check if the host queues were updated
+ *	since it last checked.
+ *
+ * FIXME: Is the q_state map[] size calculation really correct?
+ */
+struct htt_q_state {
+	u8 count[HTT_TX_Q_STATE_NUM_TIDS][HTT_TX_Q_STATE_NUM_PEERS];
+	u32 map[HTT_TX_Q_STATE_NUM_TIDS][(HTT_TX_Q_STATE_NUM_PEERS + 31) / 32];
+	__le32 seq;
+} __packed;
+
+#define HTT_TX_FETCH_RECORD_INFO_PEER_ID_MASK	0x0fff
+#define HTT_TX_FETCH_RECORD_INFO_PEER_ID_LSB	0
+#define HTT_TX_FETCH_RECORD_INFO_TID_MASK	0xf000
+#define HTT_TX_FETCH_RECORD_INFO_TID_LSB	12
+
+struct htt_tx_fetch_record {
+	__le16 info; /* HTT_TX_FETCH_IND_RECORD_INFO_ */
+	__le16 num_msdus;
+	__le32 num_bytes;
+} __packed;
+
+struct htt_tx_fetch_ind {
+	u8 pad0;
+	__le16 fetch_seq_num;
+	__le32 token;
+	__le16 num_resp_ids;
+	__le16 num_records;
+	struct htt_tx_fetch_record records[0];
+	__le32 resp_ids[0]; /* ath10k_htt_get_tx_fetch_ind_resp_ids() */
+} __packed;
+
+static inline void *
+ath10k_htt_get_tx_fetch_ind_resp_ids(struct htt_tx_fetch_ind *ind)
+{
+	return (void *)&ind->records[le16_to_cpu(ind->num_records)];
+}
+
+struct htt_tx_fetch_resp {
+	u8 pad0;
+	__le16 resp_id;
+	__le16 fetch_seq_num;
+	__le16 num_records;
+	__le32 token;
+	struct htt_tx_fetch_record records[0];
+} __packed;
+
+struct htt_tx_fetch_confirm {
+	u8 pad0;
+	__le16 num_resp_ids;
+	__le32 resp_ids[0];
+} __packed;
+
+enum htt_tx_mode_switch_mode {
+	HTT_TX_MODE_SWITCH_PUSH = 0,
+	HTT_TX_MODE_SWITCH_PUSH_PULL = 1,
+};
+
+#define HTT_TX_MODE_SWITCH_IND_INFO0_ENABLE		BIT(0)
+#define HTT_TX_MODE_SWITCH_IND_INFO0_NUM_RECORDS_MASK	0xfffe
+#define HTT_TX_MODE_SWITCH_IND_INFO0_NUM_RECORDS_LSB	1
+
+#define HTT_TX_MODE_SWITCH_IND_INFO1_MODE_MASK		0x0003
+#define HTT_TX_MODE_SWITCH_IND_INFO1_MODE_LSB		0
+#define HTT_TX_MODE_SWITCH_IND_INFO1_THRESHOLD_MASK	0xfffc
+#define HTT_TX_MODE_SWITCH_IND_INFO1_THRESHOLD_LSB	2
+
+#define HTT_TX_MODE_SWITCH_RECORD_INFO0_PEER_ID_MASK	0x0fff
+#define HTT_TX_MODE_SWITCH_RECORD_INFO0_PEER_ID_LSB	0
+#define HTT_TX_MODE_SWITCH_RECORD_INFO0_TID_MASK	0xf000
+#define HTT_TX_MODE_SWITCH_RECORD_INFO0_TID_LSB		12
+
+struct htt_tx_mode_switch_record {
+	__le16 info0; /* HTT_TX_MODE_SWITCH_RECORD_INFO0_ */
+	__le16 num_max_msdus;
+} __packed;
+
+struct htt_tx_mode_switch_ind {
+	u8 pad0;
+	__le16 info0; /* HTT_TX_MODE_SWITCH_IND_INFO0_ */
+	__le16 info1; /* HTT_TX_MODE_SWITCH_IND_INFO1_ */
+	u8 pad1[2];
+	struct htt_tx_mode_switch_record records[0];
 } __packed;
 
 union htt_rx_pn_t {
@@ -1340,6 +1483,7 @@ struct htt_cmd {
 		struct htt_oob_sync_req oob_sync_req;
 		struct htt_aggr_conf aggr_conf;
 		struct htt_frag_desc_bank_cfg frag_desc_bank_cfg;
+		struct htt_tx_fetch_resp tx_fetch_resp;
 	};
 } __packed;
 
@@ -1364,6 +1508,9 @@ struct htt_resp {
 		struct htt_rx_pn_ind rx_pn_ind;
 		struct htt_rx_offload_ind rx_offload_ind;
 		struct htt_rx_in_ord_ind rx_in_ord_ind;
+		struct htt_tx_fetch_ind tx_fetch_ind;
+		struct htt_tx_fetch_confirm tx_fetch_confirm;
+		struct htt_tx_mode_switch_ind tx_mode_switch_ind;
 	};
 } __packed;
 
-- 
cgit v1.2.3


From 9b783763aa9623dedeed77bec158f7377cb87750 Mon Sep 17 00:00:00 2001
From: Michal Kazior <michal.kazior@tieto.com>
Date: Thu, 21 Jan 2016 14:13:25 +0100
Subject: ath10k: add new FW_FEATURE_PEER_FLOW_CONTROL

This feature flag will be used for firmware which
supports pull-push model where host shares it's
software queue state with firmware and firmware
generates fetch requests telling host which queues
to dequeue tx from.

Primary function of this is improved MU-MIMO
performance with multiple clients.

Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/core.c | 1 +
 drivers/net/wireless/ath/ath10k/core.h | 9 +++++++++
 2 files changed, 10 insertions(+)

diff --git a/drivers/net/wireless/ath/ath10k/core.c b/drivers/net/wireless/ath/ath10k/core.c
index b41eb3f4ee56..48a26206c5c1 100644
--- a/drivers/net/wireless/ath/ath10k/core.c
+++ b/drivers/net/wireless/ath/ath10k/core.c
@@ -217,6 +217,7 @@ static const char *const ath10k_core_fw_feature_str[] = {
 	[ATH10K_FW_FEATURE_RAW_MODE_SUPPORT] = "raw-mode",
 	[ATH10K_FW_FEATURE_SUPPORTS_ADAPTIVE_CCA] = "adaptive-cca",
 	[ATH10K_FW_FEATURE_MFP_SUPPORT] = "mfp",
+	[ATH10K_FW_FEATURE_PEER_FLOW_CONTROL] = "peer-flow-ctrl",
 };
 
 static unsigned int ath10k_core_get_fw_feature_str(char *buf,
diff --git a/drivers/net/wireless/ath/ath10k/core.h b/drivers/net/wireless/ath/ath10k/core.h
index 921b86a4f257..5067a0ff4e89 100644
--- a/drivers/net/wireless/ath/ath10k/core.h
+++ b/drivers/net/wireless/ath/ath10k/core.h
@@ -512,6 +512,15 @@ enum ath10k_fw_features {
 	/* Firmware supports management frame protection */
 	ATH10K_FW_FEATURE_MFP_SUPPORT = 12,
 
+	/* Firmware supports pull-push model where host shares it's software
+	 * queue state with firmware and firmware generates fetch requests
+	 * telling host which queues to dequeue tx from.
+	 *
+	 * Primary function of this is improved MU-MIMO performance with
+	 * multiple clients.
+	 */
+	ATH10K_FW_FEATURE_PEER_FLOW_CONTROL = 13,
+
 	/* keep last */
 	ATH10K_FW_FEATURE_COUNT,
 };
-- 
cgit v1.2.3


From 575fc89500d37839eb24ecd258982b24edefed6f Mon Sep 17 00:00:00 2001
From: Michal Kazior <michal.kazior@tieto.com>
Date: Thu, 21 Jan 2016 14:13:26 +0100
Subject: ath10k: clean up cont frag desc init code

This makes the code easier to extend and re-use.

While at it fix _warn to _err. Other than that
there are no functional changes.

Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/htt_tx.c | 58 ++++++++++++++++++++++----------
 1 file changed, 41 insertions(+), 17 deletions(-)

diff --git a/drivers/net/wireless/ath/ath10k/htt_tx.c b/drivers/net/wireless/ath/ath10k/htt_tx.c
index b3adadb5f824..28b8d7af8506 100644
--- a/drivers/net/wireless/ath/ath10k/htt_tx.c
+++ b/drivers/net/wireless/ath/ath10k/htt_tx.c
@@ -97,6 +97,41 @@ void ath10k_htt_tx_free_msdu_id(struct ath10k_htt *htt, u16 msdu_id)
 	idr_remove(&htt->pending_tx, msdu_id);
 }
 
+static void ath10k_htt_tx_free_cont_frag_desc(struct ath10k_htt *htt)
+{
+	size_t size;
+
+	if (!htt->frag_desc.vaddr)
+		return;
+
+	size = htt->max_num_pending_tx * sizeof(struct htt_msdu_ext_desc);
+
+	dma_free_coherent(htt->ar->dev,
+			  size,
+			  htt->frag_desc.vaddr,
+			  htt->frag_desc.paddr);
+}
+
+static int ath10k_htt_tx_alloc_cont_frag_desc(struct ath10k_htt *htt)
+{
+	struct ath10k *ar = htt->ar;
+	size_t size;
+
+	if (!ar->hw_params.continuous_frag_desc)
+		return 0;
+
+	size = htt->max_num_pending_tx * sizeof(struct htt_msdu_ext_desc);
+	htt->frag_desc.vaddr = dma_alloc_coherent(ar->dev, size,
+						  &htt->frag_desc.paddr,
+						  GFP_KERNEL);
+	if (!htt->frag_desc.vaddr) {
+		ath10k_err(ar, "failed to alloc fragment desc memory\n");
+		return -ENOMEM;
+	}
+
+	return 0;
+}
+
 int ath10k_htt_tx_alloc(struct ath10k_htt *htt)
 {
 	struct ath10k *ar = htt->ar;
@@ -118,20 +153,12 @@ int ath10k_htt_tx_alloc(struct ath10k_htt *htt)
 		goto free_idr_pending_tx;
 	}
 
-	if (!ar->hw_params.continuous_frag_desc)
-		goto skip_frag_desc_alloc;
-
-	size = htt->max_num_pending_tx * sizeof(struct htt_msdu_ext_desc);
-	htt->frag_desc.vaddr = dma_alloc_coherent(ar->dev, size,
-						  &htt->frag_desc.paddr,
-						  GFP_KERNEL);
-	if (!htt->frag_desc.vaddr) {
-		ath10k_warn(ar, "failed to alloc fragment desc memory\n");
-		ret = -ENOMEM;
+	ret = ath10k_htt_tx_alloc_cont_frag_desc(htt);
+	if (ret) {
+		ath10k_err(ar, "failed to alloc cont frag desc: %d\n", ret);
 		goto free_txbuf;
 	}
 
-skip_frag_desc_alloc:
 	return 0;
 
 free_txbuf:
@@ -139,8 +166,10 @@ free_txbuf:
 			  sizeof(struct ath10k_htt_txbuf);
 	dma_free_coherent(htt->ar->dev, size, htt->txbuf.vaddr,
 			  htt->txbuf.paddr);
+
 free_idr_pending_tx:
 	idr_destroy(&htt->pending_tx);
+
 	return ret;
 }
 
@@ -174,12 +203,7 @@ void ath10k_htt_tx_free(struct ath10k_htt *htt)
 				  htt->txbuf.paddr);
 	}
 
-	if (htt->frag_desc.vaddr) {
-		size = htt->max_num_pending_tx *
-				  sizeof(struct htt_msdu_ext_desc);
-		dma_free_coherent(htt->ar->dev, size, htt->frag_desc.vaddr,
-				  htt->frag_desc.paddr);
-	}
+	ath10k_htt_tx_free_cont_frag_desc(htt);
 }
 
 void ath10k_htt_htc_tx_complete(struct ath10k *ar, struct sk_buff *skb)
-- 
cgit v1.2.3


From 9b15873628050fe59ebbfae200be7d50ce5e1491 Mon Sep 17 00:00:00 2001
From: Michal Kazior <michal.kazior@tieto.com>
Date: Thu, 21 Jan 2016 14:13:27 +0100
Subject: ath10k: implement basic support for new tx path firmware

This allows to use the new firmware which
implements the new tx data path. Without this
patch firmware supporting new tx path stops
responding shortly after booting.

This patch doesn't implement the entire pull-push
logic available in the new firmware. This will be
done in subsequent patches.

Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/htt.h    |  8 +++
 drivers/net/wireless/ath/ath10k/htt_rx.c |  4 +-
 drivers/net/wireless/ath/ath10k/htt_tx.c | 88 +++++++++++++++++++++++++++++---
 3 files changed, 91 insertions(+), 9 deletions(-)

diff --git a/drivers/net/wireless/ath/ath10k/htt.h b/drivers/net/wireless/ath/ath10k/htt.h
index 0c5628dafabf..13391ea4422d 100644
--- a/drivers/net/wireless/ath/ath10k/htt.h
+++ b/drivers/net/wireless/ath/ath10k/htt.h
@@ -1665,6 +1665,14 @@ struct ath10k_htt {
 		dma_addr_t paddr;
 		struct ath10k_htt_txbuf *vaddr;
 	} txbuf;
+
+	struct {
+		struct htt_q_state *vaddr;
+		dma_addr_t paddr;
+		u16 num_peers;
+		u16 num_tids;
+		enum htt_q_depth_type type;
+	} tx_q_state;
 };
 
 #define RX_HTT_HDR_STATUS_LEN 64
diff --git a/drivers/net/wireless/ath/ath10k/htt_rx.c b/drivers/net/wireless/ath/ath10k/htt_rx.c
index 84abe4f25c73..cc957a625605 100644
--- a/drivers/net/wireless/ath/ath10k/htt_rx.c
+++ b/drivers/net/wireless/ath/ath10k/htt_rx.c
@@ -2123,10 +2123,12 @@ void ath10k_htt_t2h_msg_handler(struct ath10k *ar, struct sk_buff *skb)
 		break;
 	case HTT_T2H_MSG_TYPE_AGGR_CONF:
 		break;
-	case HTT_T2H_MSG_TYPE_EN_STATS:
 	case HTT_T2H_MSG_TYPE_TX_FETCH_IND:
 	case HTT_T2H_MSG_TYPE_TX_FETCH_CONFIRM:
 	case HTT_T2H_MSG_TYPE_TX_MODE_SWITCH_IND:
+		/* TODO: Implement pull-push logic */
+		break;
+	case HTT_T2H_MSG_TYPE_EN_STATS:
 	default:
 		ath10k_warn(ar, "htt event (%d) not handled\n",
 			    resp->hdr.msg_type);
diff --git a/drivers/net/wireless/ath/ath10k/htt_tx.c b/drivers/net/wireless/ath/ath10k/htt_tx.c
index 28b8d7af8506..95acb727c068 100644
--- a/drivers/net/wireless/ath/ath10k/htt_tx.c
+++ b/drivers/net/wireless/ath/ath10k/htt_tx.c
@@ -132,6 +132,50 @@ static int ath10k_htt_tx_alloc_cont_frag_desc(struct ath10k_htt *htt)
 	return 0;
 }
 
+static void ath10k_htt_tx_free_txq(struct ath10k_htt *htt)
+{
+	struct ath10k *ar = htt->ar;
+	size_t size;
+
+	if (!test_bit(ATH10K_FW_FEATURE_PEER_FLOW_CONTROL, ar->fw_features))
+		return;
+
+	size = sizeof(*htt->tx_q_state.vaddr);
+
+	dma_unmap_single(ar->dev, htt->tx_q_state.paddr, size, DMA_TO_DEVICE);
+	kfree(htt->tx_q_state.vaddr);
+}
+
+static int ath10k_htt_tx_alloc_txq(struct ath10k_htt *htt)
+{
+	struct ath10k *ar = htt->ar;
+	size_t size;
+	int ret;
+
+	if (!test_bit(ATH10K_FW_FEATURE_PEER_FLOW_CONTROL, ar->fw_features))
+		return 0;
+
+	htt->tx_q_state.num_peers = HTT_TX_Q_STATE_NUM_PEERS;
+	htt->tx_q_state.num_tids = HTT_TX_Q_STATE_NUM_TIDS;
+	htt->tx_q_state.type = HTT_Q_DEPTH_TYPE_BYTES;
+
+	size = sizeof(*htt->tx_q_state.vaddr);
+	htt->tx_q_state.vaddr = kzalloc(size, GFP_KERNEL);
+	if (!htt->tx_q_state.vaddr)
+		return -ENOMEM;
+
+	htt->tx_q_state.paddr = dma_map_single(ar->dev, htt->tx_q_state.vaddr,
+					       size, DMA_TO_DEVICE);
+	ret = dma_mapping_error(ar->dev, htt->tx_q_state.paddr);
+	if (ret) {
+		ath10k_warn(ar, "failed to dma map tx_q_state: %d\n", ret);
+		kfree(htt->tx_q_state.vaddr);
+		return -EIO;
+	}
+
+	return 0;
+}
+
 int ath10k_htt_tx_alloc(struct ath10k_htt *htt)
 {
 	struct ath10k *ar = htt->ar;
@@ -159,8 +203,17 @@ int ath10k_htt_tx_alloc(struct ath10k_htt *htt)
 		goto free_txbuf;
 	}
 
+	ret = ath10k_htt_tx_alloc_txq(htt);
+	if (ret) {
+		ath10k_err(ar, "failed to alloc txq: %d\n", ret);
+		goto free_frag_desc;
+	}
+
 	return 0;
 
+free_frag_desc:
+	ath10k_htt_tx_free_cont_frag_desc(htt);
+
 free_txbuf:
 	size = htt->max_num_pending_tx *
 			  sizeof(struct ath10k_htt_txbuf);
@@ -203,6 +256,7 @@ void ath10k_htt_tx_free(struct ath10k_htt *htt)
 				  htt->txbuf.paddr);
 	}
 
+	ath10k_htt_tx_free_txq(htt);
 	ath10k_htt_tx_free_cont_frag_desc(htt);
 }
 
@@ -292,7 +346,9 @@ int ath10k_htt_send_frag_desc_bank_cfg(struct ath10k_htt *htt)
 	struct ath10k *ar = htt->ar;
 	struct sk_buff *skb;
 	struct htt_cmd *cmd;
+	struct htt_frag_desc_bank_cfg *cfg;
 	int ret, size;
+	u8 info;
 
 	if (!ar->hw_params.continuous_frag_desc)
 		return 0;
@@ -310,14 +366,30 @@ int ath10k_htt_send_frag_desc_bank_cfg(struct ath10k_htt *htt)
 	skb_put(skb, size);
 	cmd = (struct htt_cmd *)skb->data;
 	cmd->hdr.msg_type = HTT_H2T_MSG_TYPE_FRAG_DESC_BANK_CFG;
-	cmd->frag_desc_bank_cfg.info = 0;
-	cmd->frag_desc_bank_cfg.num_banks = 1;
-	cmd->frag_desc_bank_cfg.desc_size = sizeof(struct htt_msdu_ext_desc);
-	cmd->frag_desc_bank_cfg.bank_base_addrs[0] =
-				__cpu_to_le32(htt->frag_desc.paddr);
-	cmd->frag_desc_bank_cfg.bank_id[0].bank_min_id = 0;
-	cmd->frag_desc_bank_cfg.bank_id[0].bank_max_id =
-				__cpu_to_le16(htt->max_num_pending_tx - 1);
+
+	info = 0;
+	info |= SM(htt->tx_q_state.type,
+		   HTT_FRAG_DESC_BANK_CFG_INFO_Q_STATE_DEPTH_TYPE);
+
+	if (test_bit(ATH10K_FW_FEATURE_PEER_FLOW_CONTROL, ar->fw_features))
+		info |= HTT_FRAG_DESC_BANK_CFG_INFO_Q_STATE_VALID;
+
+	cfg = &cmd->frag_desc_bank_cfg;
+	cfg->info = info;
+	cfg->num_banks = 1;
+	cfg->desc_size = sizeof(struct htt_msdu_ext_desc);
+	cfg->bank_base_addrs[0] = __cpu_to_le32(htt->frag_desc.paddr);
+	cfg->bank_id[0].bank_min_id = 0;
+	cfg->bank_id[0].bank_max_id = __cpu_to_le16(htt->max_num_pending_tx -
+						    1);
+
+	cfg->q_state.paddr = cpu_to_le32(htt->tx_q_state.paddr);
+	cfg->q_state.num_peers = cpu_to_le16(htt->tx_q_state.num_peers);
+	cfg->q_state.num_tids = cpu_to_le16(htt->tx_q_state.num_tids);
+	cfg->q_state.record_size = HTT_TX_Q_STATE_ENTRY_SIZE;
+	cfg->q_state.record_multiplier = HTT_TX_Q_STATE_ENTRY_MULTIPLIER;
+
+	ath10k_dbg(ar, ATH10K_DBG_HTT, "htt frag desc bank cmd\n");
 
 	ret = ath10k_htc_send(&htt->ar->htc, htt->eid, skb);
 	if (ret) {
-- 
cgit v1.2.3


From f52f517189dea69614bbee9ec5ab2fe366905b16 Mon Sep 17 00:00:00 2001
From: Raja Mani <rmani@qti.qualcomm.com>
Date: Wed, 27 Jan 2016 15:24:22 +0530
Subject: ath10k: make some of ath10k_pci_* func reusable

Some of static functions present in pci.c file are reusable
in ahb (qca4019) case. Remove static word for those reusable
functions and have those function prototype declaration in
pci.h file. So that, pci.h header file can be included in
ahb module and reused. There is no functionality changes done
in this patch.

Signed-off-by: Raja Mani <rmani@qti.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/pci.c | 63 +++++++++++++++++------------------
 drivers/net/wireless/ath/ath10k/pci.h | 32 ++++++++++++++++++
 2 files changed, 63 insertions(+), 32 deletions(-)

diff --git a/drivers/net/wireless/ath/ath10k/pci.c b/drivers/net/wireless/ath/ath10k/pci.c
index ee925c618535..956e548fd4a7 100644
--- a/drivers/net/wireless/ath/ath10k/pci.c
+++ b/drivers/net/wireless/ath/ath10k/pci.c
@@ -94,7 +94,6 @@ static const struct ath10k_pci_supp_chip ath10k_pci_supp_chips[] = {
 static void ath10k_pci_buffer_cleanup(struct ath10k *ar);
 static int ath10k_pci_cold_reset(struct ath10k *ar);
 static int ath10k_pci_safe_chip_reset(struct ath10k *ar);
-static int ath10k_pci_wait_for_target_init(struct ath10k *ar);
 static int ath10k_pci_init_irq(struct ath10k *ar);
 static int ath10k_pci_deinit_irq(struct ath10k *ar);
 static int ath10k_pci_request_irq(struct ath10k *ar);
@@ -687,7 +686,7 @@ void ath10k_pci_reg_write32(struct ath10k *ar, u32 addr, u32 val)
 	ath10k_pci_write32(ar, PCIE_LOCAL_BASE_ADDRESS + addr, val);
 }
 
-static bool ath10k_pci_irq_pending(struct ath10k *ar)
+bool ath10k_pci_irq_pending(struct ath10k *ar)
 {
 	u32 cause;
 
@@ -700,7 +699,7 @@ static bool ath10k_pci_irq_pending(struct ath10k *ar)
 	return false;
 }
 
-static void ath10k_pci_disable_and_clear_legacy_irq(struct ath10k *ar)
+void ath10k_pci_disable_and_clear_legacy_irq(struct ath10k *ar)
 {
 	/* IMPORTANT: INTR_CLR register has to be set after
 	 * INTR_ENABLE is set to 0, otherwise interrupt can not be
@@ -716,7 +715,7 @@ static void ath10k_pci_disable_and_clear_legacy_irq(struct ath10k *ar)
 				PCIE_INTR_ENABLE_ADDRESS);
 }
 
-static void ath10k_pci_enable_legacy_irq(struct ath10k *ar)
+void ath10k_pci_enable_legacy_irq(struct ath10k *ar)
 {
 	ath10k_pci_write32(ar, SOC_CORE_BASE_ADDRESS +
 			   PCIE_INTR_ENABLE_ADDRESS,
@@ -809,7 +808,7 @@ static void ath10k_pci_rx_post_pipe(struct ath10k_pci_pipe *pipe)
 	}
 }
 
-static void ath10k_pci_rx_post(struct ath10k *ar)
+void ath10k_pci_rx_post(struct ath10k *ar)
 {
 	struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
 	int i;
@@ -818,7 +817,7 @@ static void ath10k_pci_rx_post(struct ath10k *ar)
 		ath10k_pci_rx_post_pipe(&ar_pci->pipe_info[i]);
 }
 
-static void ath10k_pci_rx_replenish_retry(unsigned long ptr)
+void ath10k_pci_rx_replenish_retry(unsigned long ptr)
 {
 	struct ath10k *ar = (void *)ptr;
 
@@ -1007,8 +1006,8 @@ static int __ath10k_pci_diag_read_hi(struct ath10k *ar, void *dest,
 #define ath10k_pci_diag_read_hi(ar, dest, src, len)		\
 	__ath10k_pci_diag_read_hi(ar, dest, HI_ITEM(src), len)
 
-static int ath10k_pci_diag_write_mem(struct ath10k *ar, u32 address,
-				     const void *data, int nbytes)
+int ath10k_pci_diag_write_mem(struct ath10k *ar, u32 address,
+			      const void *data, int nbytes)
 {
 	struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
 	int ret = 0;
@@ -1263,8 +1262,8 @@ static void ath10k_pci_htt_rx_cb(struct ath10k_ce_pipe *ce_state)
 	ath10k_pci_process_rx_cb(ce_state, ath10k_pci_htt_rx_deliver);
 }
 
-static int ath10k_pci_hif_tx_sg(struct ath10k *ar, u8 pipe_id,
-				struct ath10k_hif_sg_item *items, int n_items)
+int ath10k_pci_hif_tx_sg(struct ath10k *ar, u8 pipe_id,
+			 struct ath10k_hif_sg_item *items, int n_items)
 {
 	struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
 	struct ath10k_pci_pipe *pci_pipe = &ar_pci->pipe_info[pipe_id];
@@ -1332,13 +1331,13 @@ err:
 	return err;
 }
 
-static int ath10k_pci_hif_diag_read(struct ath10k *ar, u32 address, void *buf,
-				    size_t buf_len)
+int ath10k_pci_hif_diag_read(struct ath10k *ar, u32 address, void *buf,
+			     size_t buf_len)
 {
 	return ath10k_pci_diag_read_mem(ar, address, buf, buf_len);
 }
 
-static u16 ath10k_pci_hif_get_free_queue_number(struct ath10k *ar, u8 pipe)
+u16 ath10k_pci_hif_get_free_queue_number(struct ath10k *ar, u8 pipe)
 {
 	struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
 
@@ -1406,8 +1405,8 @@ static void ath10k_pci_fw_crashed_dump(struct ath10k *ar)
 	queue_work(ar->workqueue, &ar->restart_work);
 }
 
-static void ath10k_pci_hif_send_complete_check(struct ath10k *ar, u8 pipe,
-					       int force)
+void ath10k_pci_hif_send_complete_check(struct ath10k *ar, u8 pipe,
+					int force)
 {
 	ath10k_dbg(ar, ATH10K_DBG_PCI, "pci hif send complete check\n");
 
@@ -1432,7 +1431,7 @@ static void ath10k_pci_hif_send_complete_check(struct ath10k *ar, u8 pipe,
 	ath10k_ce_per_engine_service(ar, pipe);
 }
 
-static void ath10k_pci_kill_tasklet(struct ath10k *ar)
+void ath10k_pci_kill_tasklet(struct ath10k *ar)
 {
 	struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
 	int i;
@@ -1446,8 +1445,8 @@ static void ath10k_pci_kill_tasklet(struct ath10k *ar)
 	del_timer_sync(&ar_pci->rx_post_retry);
 }
 
-static int ath10k_pci_hif_map_service_to_pipe(struct ath10k *ar, u16 service_id,
-					      u8 *ul_pipe, u8 *dl_pipe)
+int ath10k_pci_hif_map_service_to_pipe(struct ath10k *ar, u16 service_id,
+				       u8 *ul_pipe, u8 *dl_pipe)
 {
 	const struct service_to_pipe *entry;
 	bool ul_set = false, dl_set = false;
@@ -1491,8 +1490,8 @@ static int ath10k_pci_hif_map_service_to_pipe(struct ath10k *ar, u16 service_id,
 	return 0;
 }
 
-static void ath10k_pci_hif_get_default_pipe(struct ath10k *ar,
-					    u8 *ul_pipe, u8 *dl_pipe)
+void ath10k_pci_hif_get_default_pipe(struct ath10k *ar,
+				     u8 *ul_pipe, u8 *dl_pipe)
 {
 	ath10k_dbg(ar, ATH10K_DBG_PCI, "pci hif get default pipe\n");
 
@@ -1668,7 +1667,7 @@ static void ath10k_pci_buffer_cleanup(struct ath10k *ar)
 	}
 }
 
-static void ath10k_pci_ce_deinit(struct ath10k *ar)
+void ath10k_pci_ce_deinit(struct ath10k *ar)
 {
 	int i;
 
@@ -1676,7 +1675,7 @@ static void ath10k_pci_ce_deinit(struct ath10k *ar)
 		ath10k_ce_deinit_pipe(ar, i);
 }
 
-static void ath10k_pci_flush(struct ath10k *ar)
+void ath10k_pci_flush(struct ath10k *ar)
 {
 	ath10k_pci_kill_tasklet(ar);
 	ath10k_pci_buffer_cleanup(ar);
@@ -1711,9 +1710,9 @@ static void ath10k_pci_hif_stop(struct ath10k *ar)
 	spin_unlock_irqrestore(&ar_pci->ps_lock, flags);
 }
 
-static int ath10k_pci_hif_exchange_bmi_msg(struct ath10k *ar,
-					   void *req, u32 req_len,
-					   void *resp, u32 *resp_len)
+int ath10k_pci_hif_exchange_bmi_msg(struct ath10k *ar,
+				    void *req, u32 req_len,
+				    void *resp, u32 *resp_len)
 {
 	struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
 	struct ath10k_pci_pipe *pci_tx = &ar_pci->pipe_info[BMI_CE_NUM_TO_TARG];
@@ -1907,7 +1906,7 @@ static int ath10k_pci_get_num_banks(struct ath10k *ar)
 	return 1;
 }
 
-static int ath10k_pci_init_config(struct ath10k *ar)
+int ath10k_pci_init_config(struct ath10k *ar)
 {
 	u32 interconnect_targ_addr;
 	u32 pcie_state_targ_addr = 0;
@@ -2071,7 +2070,7 @@ static void ath10k_pci_override_ce_config(struct ath10k *ar)
 	target_service_to_ce_map_wlan[15].pipenum = __cpu_to_le32(1);
 }
 
-static int ath10k_pci_alloc_pipes(struct ath10k *ar)
+int ath10k_pci_alloc_pipes(struct ath10k *ar)
 {
 	struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
 	struct ath10k_pci_pipe *pipe;
@@ -2102,7 +2101,7 @@ static int ath10k_pci_alloc_pipes(struct ath10k *ar)
 	return 0;
 }
 
-static void ath10k_pci_free_pipes(struct ath10k *ar)
+void ath10k_pci_free_pipes(struct ath10k *ar)
 {
 	int i;
 
@@ -2110,7 +2109,7 @@ static void ath10k_pci_free_pipes(struct ath10k *ar)
 		ath10k_ce_free_pipe(ar, i);
 }
 
-static int ath10k_pci_init_pipes(struct ath10k *ar)
+int ath10k_pci_init_pipes(struct ath10k *ar)
 {
 	int i, ret;
 
@@ -2453,7 +2452,7 @@ err_sleep:
 	return ret;
 }
 
-static void ath10k_pci_hif_power_down(struct ath10k *ar)
+void ath10k_pci_hif_power_down(struct ath10k *ar)
 {
 	ath10k_dbg(ar, ATH10K_DBG_BOOT, "boot hif power down\n");
 
@@ -2722,7 +2721,7 @@ static void ath10k_pci_free_irq(struct ath10k *ar)
 		free_irq(ar_pci->pdev->irq + i, ar);
 }
 
-static void ath10k_pci_init_irq_tasklets(struct ath10k *ar)
+void ath10k_pci_init_irq_tasklets(struct ath10k *ar)
 {
 	struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
 	int i;
@@ -2808,7 +2807,7 @@ static int ath10k_pci_deinit_irq(struct ath10k *ar)
 	return 0;
 }
 
-static int ath10k_pci_wait_for_target_init(struct ath10k *ar)
+int ath10k_pci_wait_for_target_init(struct ath10k *ar)
 {
 	struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
 	unsigned long timeout;
diff --git a/drivers/net/wireless/ath/ath10k/pci.h b/drivers/net/wireless/ath/ath10k/pci.h
index f91bf333cb75..ae76131aa081 100644
--- a/drivers/net/wireless/ath/ath10k/pci.h
+++ b/drivers/net/wireless/ath/ath10k/pci.h
@@ -253,6 +253,38 @@ u32 ath10k_pci_read32(struct ath10k *ar, u32 offset);
 u32 ath10k_pci_soc_read32(struct ath10k *ar, u32 addr);
 u32 ath10k_pci_reg_read32(struct ath10k *ar, u32 addr);
 
+int ath10k_pci_hif_tx_sg(struct ath10k *ar, u8 pipe_id,
+			 struct ath10k_hif_sg_item *items, int n_items);
+int ath10k_pci_hif_diag_read(struct ath10k *ar, u32 address, void *buf,
+			     size_t buf_len);
+int ath10k_pci_diag_write_mem(struct ath10k *ar, u32 address,
+			      const void *data, int nbytes);
+int ath10k_pci_hif_exchange_bmi_msg(struct ath10k *ar, void *req, u32 req_len,
+				    void *resp, u32 *resp_len);
+int ath10k_pci_hif_map_service_to_pipe(struct ath10k *ar, u16 service_id,
+				       u8 *ul_pipe, u8 *dl_pipe);
+void ath10k_pci_hif_get_default_pipe(struct ath10k *ar, u8 *ul_pipe,
+				     u8 *dl_pipe);
+void ath10k_pci_hif_send_complete_check(struct ath10k *ar, u8 pipe,
+					int force);
+u16 ath10k_pci_hif_get_free_queue_number(struct ath10k *ar, u8 pipe);
+void ath10k_pci_hif_power_down(struct ath10k *ar);
+int ath10k_pci_alloc_pipes(struct ath10k *ar);
+void ath10k_pci_free_pipes(struct ath10k *ar);
+void ath10k_pci_free_pipes(struct ath10k *ar);
+void ath10k_pci_rx_replenish_retry(unsigned long ptr);
+void ath10k_pci_ce_deinit(struct ath10k *ar);
+void ath10k_pci_init_irq_tasklets(struct ath10k *ar);
+void ath10k_pci_kill_tasklet(struct ath10k *ar);
+int ath10k_pci_init_pipes(struct ath10k *ar);
+int ath10k_pci_init_config(struct ath10k *ar);
+void ath10k_pci_rx_post(struct ath10k *ar);
+void ath10k_pci_flush(struct ath10k *ar);
+void ath10k_pci_enable_legacy_irq(struct ath10k *ar);
+bool ath10k_pci_irq_pending(struct ath10k *ar);
+void ath10k_pci_disable_and_clear_legacy_irq(struct ath10k *ar);
+int ath10k_pci_wait_for_target_init(struct ath10k *ar);
+
 /* QCA6174 is known to have Tx/Rx issues when SOC_WAKE register is poked too
  * frequently. To avoid this put SoC to sleep after a very conservative grace
  * period. Adjust with great care.
-- 
cgit v1.2.3


From 4ddb3299aa49ddeb40680d7427d3259d32aefa6d Mon Sep 17 00:00:00 2001
From: Raja Mani <rmani@qti.qualcomm.com>
Date: Wed, 27 Jan 2016 15:24:23 +0530
Subject: ath10k: make ath10k_pci_read32/write32() ops more generic

ath10k_pci_read32/write32() does work more specific to
PCI by ensuring pci wake/sleep for every read and write.
There is a plan to use most of stuff available in pci.c
(irq stuff, copy engine, etc) for AHB case. Such kind
of pci wake/sleep for every read/write is not required
in AHB case (qca4019). All those reusable areas in pci.c
and ce.c calls ath10k_pci_read32/write32() for low level
read and write.

In fact, ath10k_pci_read32/write32() should do what it does
today for PCI case. But for AHB, it has to do differently.
To make ath10k_pci_read32/write32() more generic, new function
pointers are added in ar_pci for the function which does
operation more close to the bus. Later, corresponding bus
specific read and write function will be mapped to that.

ath10k_pci_read32/write32() are changed to call directly
those function pointers without worrying which bus underlying
to it. Also, the function to get number of bank is changed
in the same way.

Signed-off-by: Raja Mani <rmani@qti.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/pci.c | 34 +++++++++++++++++++++++++++++++---
 drivers/net/wireless/ath/ath10k/pci.h |  8 ++++++++
 2 files changed, 39 insertions(+), 3 deletions(-)

diff --git a/drivers/net/wireless/ath/ath10k/pci.c b/drivers/net/wireless/ath/ath10k/pci.c
index 956e548fd4a7..c5f6604fa76d 100644
--- a/drivers/net/wireless/ath/ath10k/pci.c
+++ b/drivers/net/wireless/ath/ath10k/pci.c
@@ -619,7 +619,7 @@ static void ath10k_pci_sleep_sync(struct ath10k *ar)
 	spin_unlock_irqrestore(&ar_pci->ps_lock, flags);
 }
 
-void ath10k_pci_write32(struct ath10k *ar, u32 offset, u32 value)
+static void ath10k_bus_pci_write32(struct ath10k *ar, u32 offset, u32 value)
 {
 	struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
 	int ret;
@@ -641,7 +641,7 @@ void ath10k_pci_write32(struct ath10k *ar, u32 offset, u32 value)
 	ath10k_pci_sleep(ar);
 }
 
-u32 ath10k_pci_read32(struct ath10k *ar, u32 offset)
+static u32 ath10k_bus_pci_read32(struct ath10k *ar, u32 offset)
 {
 	struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
 	u32 val;
@@ -666,6 +666,20 @@ u32 ath10k_pci_read32(struct ath10k *ar, u32 offset)
 	return val;
 }
 
+inline void ath10k_pci_write32(struct ath10k *ar, u32 offset, u32 value)
+{
+	struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
+
+	ar_pci->bus_ops->write32(ar, offset, value);
+}
+
+inline u32 ath10k_pci_read32(struct ath10k *ar, u32 offset)
+{
+	struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
+
+	return ar_pci->bus_ops->read32(ar, offset);
+}
+
 u32 ath10k_pci_soc_read32(struct ath10k *ar, u32 addr)
 {
 	return ath10k_pci_read32(ar, RTC_SOC_BASE_ADDRESS + addr);
@@ -1906,6 +1920,13 @@ static int ath10k_pci_get_num_banks(struct ath10k *ar)
 	return 1;
 }
 
+static int ath10k_bus_get_num_banks(struct ath10k *ar)
+{
+	struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
+
+	return ar_pci->bus_ops->get_num_banks(ar);
+}
+
 int ath10k_pci_init_config(struct ath10k *ar)
 {
 	u32 interconnect_targ_addr;
@@ -2017,7 +2038,7 @@ int ath10k_pci_init_config(struct ath10k *ar)
 	/* first bank is switched to IRAM */
 	ealloc_value |= ((HI_EARLY_ALLOC_MAGIC << HI_EARLY_ALLOC_MAGIC_SHIFT) &
 			 HI_EARLY_ALLOC_MAGIC_MASK);
-	ealloc_value |= ((ath10k_pci_get_num_banks(ar) <<
+	ealloc_value |= ((ath10k_bus_get_num_banks(ar) <<
 			  HI_EARLY_ALLOC_IRAM_BANKS_SHIFT) &
 			 HI_EARLY_ALLOC_IRAM_BANKS_MASK);
 
@@ -2988,6 +3009,12 @@ static bool ath10k_pci_chip_is_supported(u32 dev_id, u32 chip_id)
 	return false;
 }
 
+static const struct ath10k_bus_ops ath10k_pci_bus_ops = {
+	.read32		= ath10k_bus_pci_read32,
+	.write32	= ath10k_bus_pci_write32,
+	.get_num_banks	= ath10k_pci_get_num_banks,
+};
+
 static int ath10k_pci_probe(struct pci_dev *pdev,
 			    const struct pci_device_id *pci_dev)
 {
@@ -3038,6 +3065,7 @@ static int ath10k_pci_probe(struct pci_dev *pdev,
 	ar_pci->ar = ar;
 	ar->dev_id = pci_dev->device;
 	ar_pci->pci_ps = pci_ps;
+	ar_pci->bus_ops = &ath10k_pci_bus_ops;
 
 	ar->id.vendor = pdev->vendor;
 	ar->id.device = pdev->device;
diff --git a/drivers/net/wireless/ath/ath10k/pci.h b/drivers/net/wireless/ath/ath10k/pci.h
index ae76131aa081..41f3faced84c 100644
--- a/drivers/net/wireless/ath/ath10k/pci.h
+++ b/drivers/net/wireless/ath/ath10k/pci.h
@@ -157,6 +157,12 @@ struct ath10k_pci_supp_chip {
 	u32 rev_id;
 };
 
+struct ath10k_bus_ops {
+	u32 (*read32)(struct ath10k *ar, u32 offset);
+	void (*write32)(struct ath10k *ar, u32 offset, u32 value);
+	int (*get_num_banks)(struct ath10k *ar);
+};
+
 struct ath10k_pci {
 	struct pci_dev *pdev;
 	struct device *dev;
@@ -225,6 +231,8 @@ struct ath10k_pci {
 	 * on MMIO read/write.
 	 */
 	bool pci_ps;
+
+	const struct ath10k_bus_ops *bus_ops;
 };
 
 static inline struct ath10k_pci *ath10k_pci_priv(struct ath10k *ar)
-- 
cgit v1.2.3


From 90188f807f2a8bada8e165b932b56f7e03b0a9b9 Mon Sep 17 00:00:00 2001
From: Raja Mani <rmani@qti.qualcomm.com>
Date: Wed, 27 Jan 2016 15:24:24 +0530
Subject: ath10k: pull reusable code from pci probe and remove for ahb

Some of the code present in ath10k_pci_{probe|remove} are reusable
in ahb case too. To avoid code duplication, move reusable code to
new functions. Later, those new functions can be called from ahb
module's probe and exit functions.

Signed-off-by: Raja Mani <rmani@qti.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/pci.c | 64 +++++++++++++++++++++++------------
 drivers/net/wireless/ath/ath10k/pci.h |  2 ++
 2 files changed, 44 insertions(+), 22 deletions(-)

diff --git a/drivers/net/wireless/ath/ath10k/pci.c b/drivers/net/wireless/ath/ath10k/pci.c
index c5f6604fa76d..6ef878c1eebc 100644
--- a/drivers/net/wireless/ath/ath10k/pci.c
+++ b/drivers/net/wireless/ath/ath10k/pci.c
@@ -3009,6 +3009,37 @@ static bool ath10k_pci_chip_is_supported(u32 dev_id, u32 chip_id)
 	return false;
 }
 
+int ath10k_pci_setup_resource(struct ath10k *ar)
+{
+	struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
+	int ret;
+
+	spin_lock_init(&ar_pci->ce_lock);
+	spin_lock_init(&ar_pci->ps_lock);
+
+	setup_timer(&ar_pci->rx_post_retry, ath10k_pci_rx_replenish_retry,
+		    (unsigned long)ar);
+
+	if (QCA_REV_6174(ar))
+		ath10k_pci_override_ce_config(ar);
+
+	ret = ath10k_pci_alloc_pipes(ar);
+	if (ret) {
+		ath10k_err(ar, "failed to allocate copy engine pipes: %d\n",
+			   ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+void ath10k_pci_release_resource(struct ath10k *ar)
+{
+	ath10k_pci_kill_tasklet(ar);
+	ath10k_pci_ce_deinit(ar);
+	ath10k_pci_free_pipes(ar);
+}
+
 static const struct ath10k_bus_ops ath10k_pci_bus_ops = {
 	.read32		= ath10k_bus_pci_read32,
 	.write32	= ath10k_bus_pci_write32,
@@ -3072,34 +3103,25 @@ static int ath10k_pci_probe(struct pci_dev *pdev,
 	ar->id.subsystem_vendor = pdev->subsystem_vendor;
 	ar->id.subsystem_device = pdev->subsystem_device;
 
-	spin_lock_init(&ar_pci->ce_lock);
-	spin_lock_init(&ar_pci->ps_lock);
-
-	setup_timer(&ar_pci->rx_post_retry, ath10k_pci_rx_replenish_retry,
-		    (unsigned long)ar);
 	setup_timer(&ar_pci->ps_timer, ath10k_pci_ps_timer,
 		    (unsigned long)ar);
 
-	ret = ath10k_pci_claim(ar);
+	ret = ath10k_pci_setup_resource(ar);
 	if (ret) {
-		ath10k_err(ar, "failed to claim device: %d\n", ret);
+		ath10k_err(ar, "failed to setup resource: %d\n", ret);
 		goto err_core_destroy;
 	}
 
-	if (QCA_REV_6174(ar))
-		ath10k_pci_override_ce_config(ar);
-
-	ret = ath10k_pci_alloc_pipes(ar);
+	ret = ath10k_pci_claim(ar);
 	if (ret) {
-		ath10k_err(ar, "failed to allocate copy engine pipes: %d\n",
-			   ret);
-		goto err_sleep;
+		ath10k_err(ar, "failed to claim device: %d\n", ret);
+		goto err_free_pipes;
 	}
 
 	ret = ath10k_pci_force_wake(ar);
 	if (ret) {
 		ath10k_warn(ar, "failed to wake up device : %d\n", ret);
-		goto err_free_pipes;
+		goto err_sleep;
 	}
 
 	ath10k_pci_ce_deinit(ar);
@@ -3108,7 +3130,7 @@ static int ath10k_pci_probe(struct pci_dev *pdev,
 	ret = ath10k_pci_init_irq(ar);
 	if (ret) {
 		ath10k_err(ar, "failed to init irqs: %d\n", ret);
-		goto err_free_pipes;
+		goto err_sleep;
 	}
 
 	ath10k_info(ar, "pci irq %s interrupts %d irq_mode %d reset_mode %d\n",
@@ -3154,13 +3176,13 @@ err_free_irq:
 err_deinit_irq:
 	ath10k_pci_deinit_irq(ar);
 
-err_free_pipes:
-	ath10k_pci_free_pipes(ar);
-
 err_sleep:
 	ath10k_pci_sleep_sync(ar);
 	ath10k_pci_release(ar);
 
+err_free_pipes:
+	ath10k_pci_free_pipes(ar);
+
 err_core_destroy:
 	ath10k_core_destroy(ar);
 
@@ -3184,10 +3206,8 @@ static void ath10k_pci_remove(struct pci_dev *pdev)
 
 	ath10k_core_unregister(ar);
 	ath10k_pci_free_irq(ar);
-	ath10k_pci_kill_tasklet(ar);
 	ath10k_pci_deinit_irq(ar);
-	ath10k_pci_ce_deinit(ar);
-	ath10k_pci_free_pipes(ar);
+	ath10k_pci_release_resource(ar);
 	ath10k_pci_sleep_sync(ar);
 	ath10k_pci_release(ar);
 	ath10k_core_destroy(ar);
diff --git a/drivers/net/wireless/ath/ath10k/pci.h b/drivers/net/wireless/ath/ath10k/pci.h
index 41f3faced84c..fcfdbca8e55e 100644
--- a/drivers/net/wireless/ath/ath10k/pci.h
+++ b/drivers/net/wireless/ath/ath10k/pci.h
@@ -292,6 +292,8 @@ void ath10k_pci_enable_legacy_irq(struct ath10k *ar);
 bool ath10k_pci_irq_pending(struct ath10k *ar);
 void ath10k_pci_disable_and_clear_legacy_irq(struct ath10k *ar);
 int ath10k_pci_wait_for_target_init(struct ath10k *ar);
+int ath10k_pci_setup_resource(struct ath10k *ar);
+void ath10k_pci_release_resource(struct ath10k *ar);
 
 /* QCA6174 is known to have Tx/Rx issues when SOC_WAKE register is poked too
  * frequently. To avoid this put SoC to sleep after a very conservative grace
-- 
cgit v1.2.3


From 0b523ced9a3cd05abf240e913b2d80e7d0fa3478 Mon Sep 17 00:00:00 2001
From: Raja Mani <rmani@qti.qualcomm.com>
Date: Wed, 27 Jan 2016 15:24:25 +0530
Subject: ath10k: add basic skeleton to support ahb

qca4019 uses ahb instead of pci where it slightly differs in device
enumeration, clock control, reset control, etc. Good thing is that
ahb also uses copy engine for the data transaction. So, the most of
the stuff implemented in pci.c/ce.c are reusable in ahb case too.

Device enumeration in ahb case comes through platform driver/device
model. All resource details like irq, memory map, clocks, etc for
qca4019 can be fetched from of_node of platform device.

Simply flow would look like,

 device tree => platform device (kernel) => platform driver (ath10k)

Device tree entry will have all qca4019 resource details and the same
info will be passed to kernel. Kernel will prepare new platform device
for that entry and expose DT info to of_node in platform device.
Later, ath10k would register platform driver with unique compatible name
and then kernels binds to corresponding compatible entry & calls ath10k
ahb probe functions. From there onwards, ath10k will take control of it
and move forward.

New bool flag CONFIG_ATH10K_AHB is added in Kconfig to conditionally
enable ahb support in ath10k. On enabling this flag, ath10k_pci.ko
will have ahb support. This patch adds only basic skeleton and few
macros to support ahb in the context of qca4019.

Signed-off-by: Raja Mani <rmani@qti.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/Kconfig  |  6 +++
 drivers/net/wireless/ath/ath10k/Makefile |  2 +
 drivers/net/wireless/ath/ath10k/ahb.c    | 67 ++++++++++++++++++++++++++++++++
 drivers/net/wireless/ath/ath10k/ahb.h    | 41 +++++++++++++++++++
 drivers/net/wireless/ath/ath10k/core.h   |  3 ++
 drivers/net/wireless/ath/ath10k/debug.h  |  1 +
 drivers/net/wireless/ath/ath10k/hw.h     |  2 +
 drivers/net/wireless/ath/ath10k/pci.c    |  8 ++++
 drivers/net/wireless/ath/ath10k/pci.h    |  1 +
 9 files changed, 131 insertions(+)
 create mode 100644 drivers/net/wireless/ath/ath10k/ahb.c
 create mode 100644 drivers/net/wireless/ath/ath10k/ahb.h

diff --git a/drivers/net/wireless/ath/ath10k/Kconfig b/drivers/net/wireless/ath/ath10k/Kconfig
index 03aa35f999a1..d7f207a6b0e0 100644
--- a/drivers/net/wireless/ath/ath10k/Kconfig
+++ b/drivers/net/wireless/ath/ath10k/Kconfig
@@ -15,6 +15,12 @@ config ATH10K_PCI
 	---help---
 	  This module adds support for PCIE bus
 
+config ATH10K_AHB
+	bool "Atheros ath10k AHB support"
+	depends on ATH10K_PCI && OF
+	---help---
+	  This module adds support for AHB bus
+
 config ATH10K_DEBUG
 	bool "Atheros ath10k debugging"
 	depends on ATH10K
diff --git a/drivers/net/wireless/ath/ath10k/Makefile b/drivers/net/wireless/ath/ath10k/Makefile
index c04fb00e7930..930fadd940d8 100644
--- a/drivers/net/wireless/ath/ath10k/Makefile
+++ b/drivers/net/wireless/ath/ath10k/Makefile
@@ -25,5 +25,7 @@ obj-$(CONFIG_ATH10K_PCI) += ath10k_pci.o
 ath10k_pci-y += pci.o \
 		ce.o
 
+ath10k_pci-$(CONFIG_ATH10K_AHB) += ahb.o
+
 # for tracing framework to find trace.h
 CFLAGS_trace.o := -I$(src)
diff --git a/drivers/net/wireless/ath/ath10k/ahb.c b/drivers/net/wireless/ath/ath10k/ahb.c
new file mode 100644
index 000000000000..129f4f4491d0
--- /dev/null
+++ b/drivers/net/wireless/ath/ath10k/ahb.c
@@ -0,0 +1,67 @@
+/*
+ * Copyright (c) 2016 Qualcomm Atheros, Inc. All rights reserved.
+ * Copyright (c) 2015 The Linux Foundation. All rights reserved.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+#include <linux/module.h>
+#include "core.h"
+#include "debug.h"
+#include "ahb.h"
+
+static const struct of_device_id ath10k_ahb_of_match[] = {
+	/* TODO: enable this entry once everything in place.
+	 * { .compatible = "qcom,ipq4019-wifi",
+	 *   .data = (void *)ATH10K_HW_QCA4019 },
+	 */
+	{ }
+};
+
+MODULE_DEVICE_TABLE(of, ath10k_ahb_of_match);
+
+static int ath10k_ahb_probe(struct platform_device *pdev)
+{
+	return 0;
+}
+
+static int ath10k_ahb_remove(struct platform_device *pdev)
+{
+	return 0;
+}
+
+static struct platform_driver ath10k_ahb_driver = {
+	.driver         = {
+		.name   = "ath10k_ahb",
+		.of_match_table = ath10k_ahb_of_match,
+	},
+	.probe  = ath10k_ahb_probe,
+	.remove = ath10k_ahb_remove,
+};
+
+int ath10k_ahb_init(void)
+{
+	int ret;
+
+	printk(KERN_ERR "AHB support is still work in progress\n");
+
+	ret = platform_driver_register(&ath10k_ahb_driver);
+	if (ret)
+		printk(KERN_ERR "failed to register ath10k ahb driver: %d\n",
+		       ret);
+	return ret;
+}
+
+void ath10k_ahb_exit(void)
+{
+	platform_driver_unregister(&ath10k_ahb_driver);
+}
diff --git a/drivers/net/wireless/ath/ath10k/ahb.h b/drivers/net/wireless/ath/ath10k/ahb.h
new file mode 100644
index 000000000000..d1afe93f9329
--- /dev/null
+++ b/drivers/net/wireless/ath/ath10k/ahb.h
@@ -0,0 +1,41 @@
+/*
+ * Copyright (c) 2016 Qualcomm Atheros, Inc. All rights reserved.
+ * Copyright (c) 2015 The Linux Foundation. All rights reserved.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#ifndef _AHB_H_
+#define _AHB_H_
+
+#include <linux/platform_device.h>
+
+#ifdef CONFIG_ATH10K_AHB
+
+int ath10k_ahb_init(void);
+void ath10k_ahb_exit(void);
+
+#else /* CONFIG_ATH10K_AHB */
+
+static inline int ath10k_ahb_init(void)
+{
+	return 0;
+}
+
+static inline void ath10k_ahb_exit(void)
+{
+}
+
+#endif /* CONFIG_ATH10K_AHB */
+
+#endif /* _AHB_H_ */
diff --git a/drivers/net/wireless/ath/ath10k/core.h b/drivers/net/wireless/ath/ath10k/core.h
index 5067a0ff4e89..2e411b5258c2 100644
--- a/drivers/net/wireless/ath/ath10k/core.h
+++ b/drivers/net/wireless/ath/ath10k/core.h
@@ -69,6 +69,7 @@ struct ath10k;
 
 enum ath10k_bus {
 	ATH10K_BUS_PCI,
+	ATH10K_BUS_AHB,
 };
 
 static inline const char *ath10k_bus_str(enum ath10k_bus bus)
@@ -76,6 +77,8 @@ static inline const char *ath10k_bus_str(enum ath10k_bus bus)
 	switch (bus) {
 	case ATH10K_BUS_PCI:
 		return "pci";
+	case ATH10K_BUS_AHB:
+		return "ahb";
 	}
 
 	return "unknown";
diff --git a/drivers/net/wireless/ath/ath10k/debug.h b/drivers/net/wireless/ath/ath10k/debug.h
index f273478e2afb..6206edd7c49f 100644
--- a/drivers/net/wireless/ath/ath10k/debug.h
+++ b/drivers/net/wireless/ath/ath10k/debug.h
@@ -37,6 +37,7 @@ enum ath10k_debug_mask {
 	ATH10K_DBG_TESTMODE	= 0x00001000,
 	ATH10K_DBG_WMI_PRINT	= 0x00002000,
 	ATH10K_DBG_PCI_PS	= 0x00004000,
+	ATH10K_DBG_AHB		= 0x00008000,
 	ATH10K_DBG_ANY		= 0xffffffff,
 };
 
diff --git a/drivers/net/wireless/ath/ath10k/hw.h b/drivers/net/wireless/ath/ath10k/hw.h
index 0678831e8671..f8850155140a 100644
--- a/drivers/net/wireless/ath/ath10k/hw.h
+++ b/drivers/net/wireless/ath/ath10k/hw.h
@@ -200,6 +200,7 @@ enum ath10k_hw_rev {
 	ATH10K_HW_QCA6174,
 	ATH10K_HW_QCA99X0,
 	ATH10K_HW_QCA9377,
+	ATH10K_HW_QCA4019,
 };
 
 struct ath10k_hw_regs {
@@ -253,6 +254,7 @@ void ath10k_hw_fill_survey_time(struct ath10k *ar, struct survey_info *survey,
 #define QCA_REV_6174(ar) ((ar)->hw_rev == ATH10K_HW_QCA6174)
 #define QCA_REV_99X0(ar) ((ar)->hw_rev == ATH10K_HW_QCA99X0)
 #define QCA_REV_9377(ar) ((ar)->hw_rev == ATH10K_HW_QCA9377)
+#define QCA_REV_40XX(ar) ((ar)->hw_rev == ATH10K_HW_QCA4019)
 
 /* Known pecularities:
  *  - raw appears in nwifi decap, raw and nwifi appear in ethernet decap
diff --git a/drivers/net/wireless/ath/ath10k/pci.c b/drivers/net/wireless/ath/ath10k/pci.c
index 6ef878c1eebc..0e338b657210 100644
--- a/drivers/net/wireless/ath/ath10k/pci.c
+++ b/drivers/net/wireless/ath/ath10k/pci.c
@@ -851,6 +851,7 @@ static u32 ath10k_pci_targ_cpu_to_ce_addr(struct ath10k *ar, u32 addr)
 		       0x7ff) << 21;
 		break;
 	case ATH10K_HW_QCA99X0:
+	case ATH10K_HW_QCA4019:
 		val = ath10k_pci_read32(ar, PCIE_BAR_REG_ADDRESS);
 		break;
 	}
@@ -1529,6 +1530,7 @@ static void ath10k_pci_irq_msi_fw_mask(struct ath10k *ar)
 				   CORE_CTRL_ADDRESS, val);
 		break;
 	case ATH10K_HW_QCA99X0:
+	case ATH10K_HW_QCA4019:
 		/* TODO: Find appropriate register configuration for QCA99X0
 		 *  to mask irq/MSI.
 		 */
@@ -1551,6 +1553,7 @@ static void ath10k_pci_irq_msi_fw_unmask(struct ath10k *ar)
 				   CORE_CTRL_ADDRESS, val);
 		break;
 	case ATH10K_HW_QCA99X0:
+	case ATH10K_HW_QCA4019:
 		/* TODO: Find appropriate register configuration for QCA99X0
 		 *  to unmask irq/MSI.
 		 */
@@ -3231,6 +3234,10 @@ static int __init ath10k_pci_init(void)
 		printk(KERN_ERR "failed to register ath10k pci driver: %d\n",
 		       ret);
 
+	ret = ath10k_ahb_init();
+	if (ret)
+		printk(KERN_ERR "ahb init failed: %d\n", ret);
+
 	return ret;
 }
 module_init(ath10k_pci_init);
@@ -3238,6 +3245,7 @@ module_init(ath10k_pci_init);
 static void __exit ath10k_pci_exit(void)
 {
 	pci_unregister_driver(&ath10k_pci_driver);
+	ath10k_ahb_exit();
 }
 
 module_exit(ath10k_pci_exit);
diff --git a/drivers/net/wireless/ath/ath10k/pci.h b/drivers/net/wireless/ath/ath10k/pci.h
index fcfdbca8e55e..c2d4a79aa29a 100644
--- a/drivers/net/wireless/ath/ath10k/pci.h
+++ b/drivers/net/wireless/ath/ath10k/pci.h
@@ -22,6 +22,7 @@
 
 #include "hw.h"
 #include "ce.h"
+#include "ahb.h"
 
 /*
  * maximum number of bytes that can be handled atomically by DiagRead/DiagWrite
-- 
cgit v1.2.3


From 37a219a556b01b3236156ecf58717c1e41b552d9 Mon Sep 17 00:00:00 2001
From: Raja Mani <rmani@qti.qualcomm.com>
Date: Wed, 27 Jan 2016 15:24:26 +0530
Subject: ath10k: include qca4019 register map table

New register table is added for qca4019 to tell about it's
register mapping details.

Nothing much other than this.

Signed-off-by: Raja Mani <rmani@qti.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/core.c |  4 ++++
 drivers/net/wireless/ath/ath10k/hw.c   | 39 ++++++++++++++++++++++++++++++++++
 drivers/net/wireless/ath/ath10k/hw.h   |  2 ++
 3 files changed, 45 insertions(+)

diff --git a/drivers/net/wireless/ath/ath10k/core.c b/drivers/net/wireless/ath/ath10k/core.c
index 48a26206c5c1..1f4a27881936 100644
--- a/drivers/net/wireless/ath/ath10k/core.c
+++ b/drivers/net/wireless/ath/ath10k/core.c
@@ -1980,6 +1980,10 @@ struct ath10k *ath10k_core_create(size_t priv_size, struct device *dev,
 		ar->regs = &qca99x0_regs;
 		ar->hw_values = &qca99x0_values;
 		break;
+	case ATH10K_HW_QCA4019:
+		ar->regs = &qca4019_regs;
+		ar->hw_values = &qca4019_values;
+		break;
 	default:
 		ath10k_err(ar, "unsupported core hardware revision %d\n",
 			   hw_rev);
diff --git a/drivers/net/wireless/ath/ath10k/hw.c b/drivers/net/wireless/ath/ath10k/hw.c
index 7b84d08a5154..f544d48518c3 100644
--- a/drivers/net/wireless/ath/ath10k/hw.c
+++ b/drivers/net/wireless/ath/ath10k/hw.c
@@ -109,6 +109,38 @@ const struct ath10k_hw_regs qca99x0_regs = {
 	.pcie_intr_clr_address			= 0x00000010,
 };
 
+const struct ath10k_hw_regs qca4019_regs = {
+	.rtc_soc_base_address                   = 0x00080000,
+	.soc_core_base_address                  = 0x00082000,
+	.ce_wrapper_base_address                = 0x0004d000,
+	.ce0_base_address                       = 0x0004a000,
+	.ce1_base_address                       = 0x0004a400,
+	.ce2_base_address                       = 0x0004a800,
+	.ce3_base_address                       = 0x0004ac00,
+	.ce4_base_address                       = 0x0004b000,
+	.ce5_base_address                       = 0x0004b400,
+	.ce6_base_address                       = 0x0004b800,
+	.ce7_base_address                       = 0x0004bc00,
+	/* qca4019 supports upto 12 copy engines. Since base address
+	 * of ce8 to ce11 are not directly referred in the code,
+	 * no need have them in separate members in this table.
+	 *      Copy Engine             Address
+	 *      CE8                     0x0004c000
+	 *      CE9                     0x0004c400
+	 *      CE10                    0x0004c800
+	 *      CE11                    0x0004cc00
+	 */
+	.soc_reset_control_si0_rst_mask         = 0x00000001,
+	.soc_reset_control_ce_rst_mask          = 0x00000100,
+	.soc_chip_id_address                    = 0x000000ec,
+	.fw_indicator_address                   = 0x0004f00c,
+	.ce_wrap_intr_sum_host_msi_lsb          = 0x0000000c,
+	.ce_wrap_intr_sum_host_msi_mask         = 0x00fff000,
+	.pcie_intr_fw_mask                      = 0x00100000,
+	.pcie_intr_ce_mask_all                  = 0x000fff00,
+	.pcie_intr_clr_address                  = 0x00000010,
+};
+
 const struct ath10k_hw_values qca988x_values = {
 	.rtc_state_val_on		= 3,
 	.ce_count			= 8,
@@ -136,6 +168,13 @@ const struct ath10k_hw_values qca99x0_values = {
 	.ce_desc_meta_data_lsb		= 4,
 };
 
+const struct ath10k_hw_values qca4019_values = {
+	.ce_count                       = 12,
+	.num_target_ce_config_wlan      = 10,
+	.ce_desc_meta_data_mask         = 0xFFF0,
+	.ce_desc_meta_data_lsb          = 4,
+};
+
 void ath10k_hw_fill_survey_time(struct ath10k *ar, struct survey_info *survey,
 				u32 cc, u32 rcc, u32 cc_prev, u32 rcc_prev)
 {
diff --git a/drivers/net/wireless/ath/ath10k/hw.h b/drivers/net/wireless/ath/ath10k/hw.h
index f8850155140a..f57a37bfc9f6 100644
--- a/drivers/net/wireless/ath/ath10k/hw.h
+++ b/drivers/net/wireless/ath/ath10k/hw.h
@@ -233,6 +233,7 @@ struct ath10k_hw_regs {
 extern const struct ath10k_hw_regs qca988x_regs;
 extern const struct ath10k_hw_regs qca6174_regs;
 extern const struct ath10k_hw_regs qca99x0_regs;
+extern const struct ath10k_hw_regs qca4019_regs;
 
 struct ath10k_hw_values {
 	u32 rtc_state_val_on;
@@ -246,6 +247,7 @@ struct ath10k_hw_values {
 extern const struct ath10k_hw_values qca988x_values;
 extern const struct ath10k_hw_values qca6174_values;
 extern const struct ath10k_hw_values qca99x0_values;
+extern const struct ath10k_hw_values qca4019_values;
 
 void ath10k_hw_fill_survey_time(struct ath10k *ar, struct survey_info *survey,
 				u32 cc, u32 rcc, u32 cc_prev, u32 rcc_prev);
-- 
cgit v1.2.3


From 7f8e79cdc2534559e3e38f5aee0b9f78e57e8fb3 Mon Sep 17 00:00:00 2001
From: Raja Mani <rmani@qti.qualcomm.com>
Date: Wed, 27 Jan 2016 15:24:27 +0530
Subject: ath10k: add helper functions in ahb.c for reg rd/wr

qca4019 deals with below register memory region to control the clock,
reset, etc.

        - Memory to control wifi core
        - gcc (outside of wifi)
        - tcsr (outside of wifi)

Add new helper functions to perform read/write in above registers
spaces. Actual ioremap for above registers are done in later patch.
Struct ath10k_ahb is introduced to maintain ahb specific info and
memory this struct will be allocated in the continuation of struct
ath10k_pci (again, memory ath10k_ahb is allocated in the later patch).

Signed-off-by: Raja Mani <rmani@qti.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/ahb.c | 55 +++++++++++++++++++++++++++++++++++
 drivers/net/wireless/ath/ath10k/ahb.h |  7 +++++
 drivers/net/wireless/ath/ath10k/pci.h |  6 ++++
 3 files changed, 68 insertions(+)

diff --git a/drivers/net/wireless/ath/ath10k/ahb.c b/drivers/net/wireless/ath/ath10k/ahb.c
index 129f4f4491d0..eab4b47237e0 100644
--- a/drivers/net/wireless/ath/ath10k/ahb.c
+++ b/drivers/net/wireless/ath/ath10k/ahb.c
@@ -17,6 +17,7 @@
 #include <linux/module.h>
 #include "core.h"
 #include "debug.h"
+#include "pci.h"
 #include "ahb.h"
 
 static const struct of_device_id ath10k_ahb_of_match[] = {
@@ -29,6 +30,60 @@ static const struct of_device_id ath10k_ahb_of_match[] = {
 
 MODULE_DEVICE_TABLE(of, ath10k_ahb_of_match);
 
+static inline struct ath10k_ahb *ath10k_ahb_priv(struct ath10k *ar)
+{
+	return &((struct ath10k_pci *)ar->drv_priv)->ahb[0];
+}
+
+static void ath10k_ahb_write32(struct ath10k *ar, u32 offset, u32 value)
+{
+	struct ath10k_ahb *ar_ahb = ath10k_ahb_priv(ar);
+
+	iowrite32(value, ar_ahb->mem + offset);
+}
+
+static u32 ath10k_ahb_read32(struct ath10k *ar, u32 offset)
+{
+	struct ath10k_ahb *ar_ahb = ath10k_ahb_priv(ar);
+
+	return ioread32(ar_ahb->mem + offset);
+}
+
+static u32 ath10k_ahb_gcc_read32(struct ath10k *ar, u32 offset)
+{
+	struct ath10k_ahb *ar_ahb = ath10k_ahb_priv(ar);
+
+	return ioread32(ar_ahb->gcc_mem + offset);
+}
+
+static void ath10k_ahb_tcsr_write32(struct ath10k *ar, u32 offset, u32 value)
+{
+	struct ath10k_ahb *ar_ahb = ath10k_ahb_priv(ar);
+
+	iowrite32(value, ar_ahb->tcsr_mem + offset);
+}
+
+static u32 ath10k_ahb_tcsr_read32(struct ath10k *ar, u32 offset)
+{
+	struct ath10k_ahb *ar_ahb = ath10k_ahb_priv(ar);
+
+	return ioread32(ar_ahb->tcsr_mem + offset);
+}
+
+static u32 ath10k_ahb_soc_read32(struct ath10k *ar, u32 addr)
+{
+	return ath10k_ahb_read32(ar, RTC_SOC_BASE_ADDRESS + addr);
+}
+
+static int ath10k_ahb_get_num_banks(struct ath10k *ar)
+{
+	if (ar->hw_rev == ATH10K_HW_QCA4019)
+		return 1;
+
+	ath10k_warn(ar, "unknown number of banks, assuming 1\n");
+	return 1;
+}
+
 static int ath10k_ahb_probe(struct platform_device *pdev)
 {
 	return 0;
diff --git a/drivers/net/wireless/ath/ath10k/ahb.h b/drivers/net/wireless/ath/ath10k/ahb.h
index d1afe93f9329..77d15af59c4a 100644
--- a/drivers/net/wireless/ath/ath10k/ahb.h
+++ b/drivers/net/wireless/ath/ath10k/ahb.h
@@ -20,6 +20,13 @@
 
 #include <linux/platform_device.h>
 
+struct ath10k_ahb {
+	struct platform_device *pdev;
+	void __iomem *mem;
+	void __iomem *gcc_mem;
+	void __iomem *tcsr_mem;
+};
+
 #ifdef CONFIG_ATH10K_AHB
 
 int ath10k_ahb_init(void);
diff --git a/drivers/net/wireless/ath/ath10k/pci.h b/drivers/net/wireless/ath/ath10k/pci.h
index c2d4a79aa29a..249c73a69800 100644
--- a/drivers/net/wireless/ath/ath10k/pci.h
+++ b/drivers/net/wireless/ath/ath10k/pci.h
@@ -234,6 +234,12 @@ struct ath10k_pci {
 	bool pci_ps;
 
 	const struct ath10k_bus_ops *bus_ops;
+
+	/* Keep this entry in the last, memory for struct ath10k_ahb is
+	 * allocated (ahb support enabled case) in the continuation of
+	 * this struct.
+	 */
+	struct ath10k_ahb ahb[0];
 };
 
 static inline struct ath10k_pci *ath10k_pci_priv(struct ath10k *ar)
-- 
cgit v1.2.3


From 8beff219c528d19c66e9d2c40fa868d7e7c2e36f Mon Sep 17 00:00:00 2001
From: Raja Mani <rmani@qti.qualcomm.com>
Date: Wed, 27 Jan 2016 15:24:28 +0530
Subject: ath10k: add clock ctrl related functions in ahb

pre qca4019 chipsets has/uses internal clock generator for
the operation. But, qca4019 uses external clocks supplied from
outside of target (ie, outside of wifi core). Three different clocks
(cmd clock, ref clock, rtc clock) comes into picture in qca4019.
All those clocks needs to configured with help of global clock
controller (gcc) to make qca4019 functioning.

Add functions for clock init/deinit, clock enable/disable in ahb.
This is just a preparation, functions added in this patch will be
used in later patches.

Signed-off-by: Raja Mani <rmani@qti.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/ahb.c | 123 ++++++++++++++++++++++++++++++++++
 drivers/net/wireless/ath/ath10k/ahb.h |   4 ++
 2 files changed, 127 insertions(+)

diff --git a/drivers/net/wireless/ath/ath10k/ahb.c b/drivers/net/wireless/ath/ath10k/ahb.c
index eab4b47237e0..11185c0dc6ad 100644
--- a/drivers/net/wireless/ath/ath10k/ahb.c
+++ b/drivers/net/wireless/ath/ath10k/ahb.c
@@ -15,6 +15,7 @@
  * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
  */
 #include <linux/module.h>
+#include <linux/clk.h>
 #include "core.h"
 #include "debug.h"
 #include "pci.h"
@@ -84,6 +85,128 @@ static int ath10k_ahb_get_num_banks(struct ath10k *ar)
 	return 1;
 }
 
+static int ath10k_ahb_clock_init(struct ath10k *ar)
+{
+	struct ath10k_ahb *ar_ahb = ath10k_ahb_priv(ar);
+	struct device *dev;
+	int ret;
+
+	dev = &ar_ahb->pdev->dev;
+
+	ar_ahb->cmd_clk = clk_get(dev, "wifi_wcss_cmd");
+	if (IS_ERR_OR_NULL(ar_ahb->cmd_clk)) {
+		ath10k_err(ar, "failed to get cmd clk: %ld\n",
+			   PTR_ERR(ar_ahb->cmd_clk));
+		ret = ar_ahb->cmd_clk ? PTR_ERR(ar_ahb->cmd_clk) : -ENODEV;
+		goto out;
+	}
+
+	ar_ahb->ref_clk = clk_get(dev, "wifi_wcss_ref");
+	if (IS_ERR_OR_NULL(ar_ahb->ref_clk)) {
+		ath10k_err(ar, "failed to get ref clk: %ld\n",
+			   PTR_ERR(ar_ahb->ref_clk));
+		ret = ar_ahb->ref_clk ? PTR_ERR(ar_ahb->ref_clk) : -ENODEV;
+		goto err_cmd_clk_put;
+	}
+
+	ar_ahb->rtc_clk = clk_get(dev, "wifi_wcss_rtc");
+	if (IS_ERR_OR_NULL(ar_ahb->rtc_clk)) {
+		ath10k_err(ar, "failed to get rtc clk: %ld\n",
+			   PTR_ERR(ar_ahb->rtc_clk));
+		ret = ar_ahb->rtc_clk ? PTR_ERR(ar_ahb->rtc_clk) : -ENODEV;
+		goto err_ref_clk_put;
+	}
+
+	return 0;
+
+err_ref_clk_put:
+	clk_put(ar_ahb->ref_clk);
+
+err_cmd_clk_put:
+	clk_put(ar_ahb->cmd_clk);
+
+out:
+	return ret;
+}
+
+static void ath10k_ahb_clock_deinit(struct ath10k *ar)
+{
+	struct ath10k_ahb *ar_ahb = ath10k_ahb_priv(ar);
+
+	if (!IS_ERR_OR_NULL(ar_ahb->cmd_clk))
+		clk_put(ar_ahb->cmd_clk);
+
+	if (!IS_ERR_OR_NULL(ar_ahb->ref_clk))
+		clk_put(ar_ahb->ref_clk);
+
+	if (!IS_ERR_OR_NULL(ar_ahb->rtc_clk))
+		clk_put(ar_ahb->rtc_clk);
+
+	ar_ahb->cmd_clk = NULL;
+	ar_ahb->ref_clk = NULL;
+	ar_ahb->rtc_clk = NULL;
+}
+
+static int ath10k_ahb_clock_enable(struct ath10k *ar)
+{
+	struct ath10k_ahb *ar_ahb = ath10k_ahb_priv(ar);
+	struct device *dev;
+	int ret;
+
+	dev = &ar_ahb->pdev->dev;
+
+	if (IS_ERR_OR_NULL(ar_ahb->cmd_clk) ||
+	    IS_ERR_OR_NULL(ar_ahb->ref_clk) ||
+	    IS_ERR_OR_NULL(ar_ahb->rtc_clk)) {
+		ath10k_err(ar, "clock(s) is/are not initialized\n");
+		ret = -EIO;
+		goto out;
+	}
+
+	ret = clk_prepare_enable(ar_ahb->cmd_clk);
+	if (ret) {
+		ath10k_err(ar, "failed to enable cmd clk: %d\n", ret);
+		goto out;
+	}
+
+	ret = clk_prepare_enable(ar_ahb->ref_clk);
+	if (ret) {
+		ath10k_err(ar, "failed to enable ref clk: %d\n", ret);
+		goto err_cmd_clk_disable;
+	}
+
+	ret = clk_prepare_enable(ar_ahb->rtc_clk);
+	if (ret) {
+		ath10k_err(ar, "failed to enable rtc clk: %d\n", ret);
+		goto err_ref_clk_disable;
+	}
+
+	return 0;
+
+err_ref_clk_disable:
+	clk_disable_unprepare(ar_ahb->ref_clk);
+
+err_cmd_clk_disable:
+	clk_disable_unprepare(ar_ahb->cmd_clk);
+
+out:
+	return ret;
+}
+
+static void ath10k_ahb_clock_disable(struct ath10k *ar)
+{
+	struct ath10k_ahb *ar_ahb = ath10k_ahb_priv(ar);
+
+	if (!IS_ERR_OR_NULL(ar_ahb->cmd_clk))
+		clk_disable_unprepare(ar_ahb->cmd_clk);
+
+	if (!IS_ERR_OR_NULL(ar_ahb->ref_clk))
+		clk_disable_unprepare(ar_ahb->ref_clk);
+
+	if (!IS_ERR_OR_NULL(ar_ahb->rtc_clk))
+		clk_disable_unprepare(ar_ahb->rtc_clk);
+}
+
 static int ath10k_ahb_probe(struct platform_device *pdev)
 {
 	return 0;
diff --git a/drivers/net/wireless/ath/ath10k/ahb.h b/drivers/net/wireless/ath/ath10k/ahb.h
index 77d15af59c4a..753b4330075a 100644
--- a/drivers/net/wireless/ath/ath10k/ahb.h
+++ b/drivers/net/wireless/ath/ath10k/ahb.h
@@ -25,6 +25,10 @@ struct ath10k_ahb {
 	void __iomem *mem;
 	void __iomem *gcc_mem;
 	void __iomem *tcsr_mem;
+
+	struct clk *cmd_clk;
+	struct clk *ref_clk;
+	struct clk *rtc_clk;
 };
 
 #ifdef CONFIG_ATH10K_AHB
-- 
cgit v1.2.3


From 14854bfd9daaa20778db64f224a957c2abaab6fe Mon Sep 17 00:00:00 2001
From: Raja Mani <rmani@qti.qualcomm.com>
Date: Wed, 27 Jan 2016 15:24:29 +0530
Subject: ath10k: add reset ctrl related functions in ahb

To perform reset on qca4019 wifi, multiple reset lines needs
to be toggled in a sequence with help of reset controller support
in the kernel. This patch adds functions to reset control init/deinit
and release reset.

Signed-off-by: Raja Mani <rmani@qti.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/Kconfig |   2 +-
 drivers/net/wireless/ath/ath10k/ahb.c   | 138 ++++++++++++++++++++++++++++++++
 drivers/net/wireless/ath/ath10k/ahb.h   |   6 ++
 3 files changed, 145 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/ath/ath10k/Kconfig b/drivers/net/wireless/ath/ath10k/Kconfig
index d7f207a6b0e0..db1ca629cbd6 100644
--- a/drivers/net/wireless/ath/ath10k/Kconfig
+++ b/drivers/net/wireless/ath/ath10k/Kconfig
@@ -17,7 +17,7 @@ config ATH10K_PCI
 
 config ATH10K_AHB
 	bool "Atheros ath10k AHB support"
-	depends on ATH10K_PCI && OF
+	depends on ATH10K_PCI && OF && RESET_CONTROLLER
 	---help---
 	  This module adds support for AHB bus
 
diff --git a/drivers/net/wireless/ath/ath10k/ahb.c b/drivers/net/wireless/ath/ath10k/ahb.c
index 11185c0dc6ad..d1f197220e30 100644
--- a/drivers/net/wireless/ath/ath10k/ahb.c
+++ b/drivers/net/wireless/ath/ath10k/ahb.c
@@ -16,6 +16,7 @@
  */
 #include <linux/module.h>
 #include <linux/clk.h>
+#include <linux/reset.h>
 #include "core.h"
 #include "debug.h"
 #include "pci.h"
@@ -207,6 +208,143 @@ static void ath10k_ahb_clock_disable(struct ath10k *ar)
 		clk_disable_unprepare(ar_ahb->rtc_clk);
 }
 
+static int ath10k_ahb_rst_ctrl_init(struct ath10k *ar)
+{
+	struct ath10k_ahb *ar_ahb = ath10k_ahb_priv(ar);
+	struct device *dev;
+	int ret;
+
+	dev = &ar_ahb->pdev->dev;
+
+	ar_ahb->core_cold_rst = reset_control_get(dev, "wifi_core_cold");
+	if (IS_ERR_OR_NULL(ar_ahb->core_cold_rst)) {
+		ath10k_err(ar, "failed to get core cold rst ctrl: %ld\n",
+			   PTR_ERR(ar_ahb->core_cold_rst));
+		ret = ar_ahb->core_cold_rst ?
+			PTR_ERR(ar_ahb->core_cold_rst) : -ENODEV;
+		goto out;
+	}
+
+	ar_ahb->radio_cold_rst = reset_control_get(dev, "wifi_radio_cold");
+	if (IS_ERR_OR_NULL(ar_ahb->radio_cold_rst)) {
+		ath10k_err(ar, "failed to get radio cold rst ctrl: %ld\n",
+			   PTR_ERR(ar_ahb->radio_cold_rst));
+		ret = ar_ahb->radio_cold_rst ?
+			PTR_ERR(ar_ahb->radio_cold_rst) : -ENODEV;
+		goto err_core_cold_rst_put;
+	}
+
+	ar_ahb->radio_warm_rst = reset_control_get(dev, "wifi_radio_warm");
+	if (IS_ERR_OR_NULL(ar_ahb->radio_warm_rst)) {
+		ath10k_err(ar, "failed to get radio warm rst ctrl: %ld\n",
+			   PTR_ERR(ar_ahb->radio_warm_rst));
+		ret = ar_ahb->radio_warm_rst ?
+			PTR_ERR(ar_ahb->radio_warm_rst) : -ENODEV;
+		goto err_radio_cold_rst_put;
+	}
+
+	ar_ahb->radio_srif_rst = reset_control_get(dev, "wifi_radio_srif");
+	if (IS_ERR_OR_NULL(ar_ahb->radio_srif_rst)) {
+		ath10k_err(ar, "failed to get radio srif rst ctrl: %ld\n",
+			   PTR_ERR(ar_ahb->radio_srif_rst));
+		ret = ar_ahb->radio_srif_rst ?
+			PTR_ERR(ar_ahb->radio_srif_rst) : -ENODEV;
+		goto err_radio_warm_rst_put;
+	}
+
+	ar_ahb->cpu_init_rst = reset_control_get(dev, "wifi_cpu_init");
+	if (IS_ERR_OR_NULL(ar_ahb->cpu_init_rst)) {
+		ath10k_err(ar, "failed to get cpu init rst ctrl: %ld\n",
+			   PTR_ERR(ar_ahb->cpu_init_rst));
+		ret = ar_ahb->cpu_init_rst ?
+			PTR_ERR(ar_ahb->cpu_init_rst) : -ENODEV;
+		goto err_radio_srif_rst_put;
+	}
+
+	return 0;
+
+err_radio_srif_rst_put:
+	reset_control_put(ar_ahb->radio_srif_rst);
+
+err_radio_warm_rst_put:
+	reset_control_put(ar_ahb->radio_warm_rst);
+
+err_radio_cold_rst_put:
+	reset_control_put(ar_ahb->radio_cold_rst);
+
+err_core_cold_rst_put:
+	reset_control_put(ar_ahb->core_cold_rst);
+
+out:
+	return ret;
+}
+
+static void ath10k_ahb_rst_ctrl_deinit(struct ath10k *ar)
+{
+	struct ath10k_ahb *ar_ahb = ath10k_ahb_priv(ar);
+
+	if (!IS_ERR_OR_NULL(ar_ahb->core_cold_rst))
+		reset_control_put(ar_ahb->core_cold_rst);
+
+	if (!IS_ERR_OR_NULL(ar_ahb->radio_cold_rst))
+		reset_control_put(ar_ahb->radio_cold_rst);
+
+	if (!IS_ERR_OR_NULL(ar_ahb->radio_warm_rst))
+		reset_control_put(ar_ahb->radio_warm_rst);
+
+	if (!IS_ERR_OR_NULL(ar_ahb->radio_srif_rst))
+		reset_control_put(ar_ahb->radio_srif_rst);
+
+	if (!IS_ERR_OR_NULL(ar_ahb->cpu_init_rst))
+		reset_control_put(ar_ahb->cpu_init_rst);
+
+	ar_ahb->core_cold_rst = NULL;
+	ar_ahb->radio_cold_rst = NULL;
+	ar_ahb->radio_warm_rst = NULL;
+	ar_ahb->radio_srif_rst = NULL;
+	ar_ahb->cpu_init_rst = NULL;
+}
+
+static int ath10k_ahb_release_reset(struct ath10k *ar)
+{
+	struct ath10k_ahb *ar_ahb = ath10k_ahb_priv(ar);
+	int ret;
+
+	if (IS_ERR_OR_NULL(ar_ahb->radio_cold_rst) ||
+	    IS_ERR_OR_NULL(ar_ahb->radio_warm_rst) ||
+	    IS_ERR_OR_NULL(ar_ahb->radio_srif_rst) ||
+	    IS_ERR_OR_NULL(ar_ahb->cpu_init_rst)) {
+		ath10k_err(ar, "rst ctrl(s) is/are not initialized\n");
+		return -EINVAL;
+	}
+
+	ret = reset_control_deassert(ar_ahb->radio_cold_rst);
+	if (ret) {
+		ath10k_err(ar, "failed to deassert radio cold rst: %d\n", ret);
+		return ret;
+	}
+
+	ret = reset_control_deassert(ar_ahb->radio_warm_rst);
+	if (ret) {
+		ath10k_err(ar, "failed to deassert radio warm rst: %d\n", ret);
+		return ret;
+	}
+
+	ret = reset_control_deassert(ar_ahb->radio_srif_rst);
+	if (ret) {
+		ath10k_err(ar, "failed to deassert radio srif rst: %d\n", ret);
+		return ret;
+	}
+
+	ret = reset_control_deassert(ar_ahb->cpu_init_rst);
+	if (ret) {
+		ath10k_err(ar, "failed to deassert cpu init rst: %d\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
 static int ath10k_ahb_probe(struct platform_device *pdev)
 {
 	return 0;
diff --git a/drivers/net/wireless/ath/ath10k/ahb.h b/drivers/net/wireless/ath/ath10k/ahb.h
index 753b4330075a..2904b7bc9459 100644
--- a/drivers/net/wireless/ath/ath10k/ahb.h
+++ b/drivers/net/wireless/ath/ath10k/ahb.h
@@ -29,6 +29,12 @@ struct ath10k_ahb {
 	struct clk *cmd_clk;
 	struct clk *ref_clk;
 	struct clk *rtc_clk;
+
+	struct reset_control *core_cold_rst;
+	struct reset_control *radio_cold_rst;
+	struct reset_control *radio_warm_rst;
+	struct reset_control *radio_srif_rst;
+	struct reset_control *cpu_init_rst;
 };
 
 #ifdef CONFIG_ATH10K_AHB
-- 
cgit v1.2.3


From 133df0f849bc7b5448c62272986af626f2bda6bd Mon Sep 17 00:00:00 2001
From: Raja Mani <rmani@qti.qualcomm.com>
Date: Wed, 27 Jan 2016 15:24:30 +0530
Subject: ath10k: add chip and bus halt logic in ahb

Add function to perform chip halt sequence and function to halt axi
bus in ahb module. Mainly used in the scenario like driver unload.

Signed-off-by: Raja Mani <rmani@qti.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/ahb.c | 113 ++++++++++++++++++++++++++++++++++
 drivers/net/wireless/ath/ath10k/ahb.h |  15 +++++
 2 files changed, 128 insertions(+)

diff --git a/drivers/net/wireless/ath/ath10k/ahb.c b/drivers/net/wireless/ath/ath10k/ahb.c
index d1f197220e30..230507890fbf 100644
--- a/drivers/net/wireless/ath/ath10k/ahb.c
+++ b/drivers/net/wireless/ath/ath10k/ahb.c
@@ -345,6 +345,119 @@ static int ath10k_ahb_release_reset(struct ath10k *ar)
 	return 0;
 }
 
+static void ath10k_ahb_halt_axi_bus(struct ath10k *ar, u32 haltreq_reg,
+				    u32 haltack_reg)
+{
+	unsigned long timeout;
+	u32 val;
+
+	/* Issue halt axi bus request */
+	val = ath10k_ahb_tcsr_read32(ar, haltreq_reg);
+	val |= AHB_AXI_BUS_HALT_REQ;
+	ath10k_ahb_tcsr_write32(ar, haltreq_reg, val);
+
+	/* Wait for axi bus halted ack */
+	timeout = jiffies + msecs_to_jiffies(ATH10K_AHB_AXI_BUS_HALT_TIMEOUT);
+	do {
+		val = ath10k_ahb_tcsr_read32(ar, haltack_reg);
+		if (val & AHB_AXI_BUS_HALT_ACK)
+			break;
+
+		mdelay(1);
+	} while (time_before(jiffies, timeout));
+
+	if (!(val & AHB_AXI_BUS_HALT_ACK)) {
+		ath10k_err(ar, "failed to halt axi bus: %d\n", val);
+		return;
+	}
+
+	ath10k_dbg(ar, ATH10K_DBG_AHB, "axi bus halted\n");
+}
+
+static void ath10k_ahb_halt_chip(struct ath10k *ar)
+{
+	struct ath10k_ahb *ar_ahb = ath10k_ahb_priv(ar);
+	u32 core_id, glb_cfg_reg, haltreq_reg, haltack_reg;
+	u32 val;
+	int ret;
+
+	if (IS_ERR_OR_NULL(ar_ahb->core_cold_rst) ||
+	    IS_ERR_OR_NULL(ar_ahb->radio_cold_rst) ||
+	    IS_ERR_OR_NULL(ar_ahb->radio_warm_rst) ||
+	    IS_ERR_OR_NULL(ar_ahb->radio_srif_rst) ||
+	    IS_ERR_OR_NULL(ar_ahb->cpu_init_rst)) {
+		ath10k_err(ar, "rst ctrl(s) is/are not initialized\n");
+		return;
+	}
+
+	core_id = ath10k_ahb_read32(ar, ATH10K_AHB_WLAN_CORE_ID_REG);
+
+	switch (core_id) {
+	case 0:
+		glb_cfg_reg = ATH10K_AHB_TCSR_WIFI0_GLB_CFG;
+		haltreq_reg = ATH10K_AHB_TCSR_WCSS0_HALTREQ;
+		haltack_reg = ATH10K_AHB_TCSR_WCSS0_HALTACK;
+		break;
+	case 1:
+		glb_cfg_reg = ATH10K_AHB_TCSR_WIFI1_GLB_CFG;
+		haltreq_reg = ATH10K_AHB_TCSR_WCSS1_HALTREQ;
+		haltack_reg = ATH10K_AHB_TCSR_WCSS1_HALTACK;
+		break;
+	default:
+		ath10k_err(ar, "invalid core id %d found, skipping reset sequence\n",
+			   core_id);
+		return;
+	}
+
+	ath10k_ahb_halt_axi_bus(ar, haltreq_reg, haltack_reg);
+
+	val = ath10k_ahb_tcsr_read32(ar, glb_cfg_reg);
+	val |= TCSR_WIFIX_GLB_CFG_DISABLE_CORE_CLK;
+	ath10k_ahb_tcsr_write32(ar, glb_cfg_reg, val);
+
+	ret = reset_control_assert(ar_ahb->core_cold_rst);
+	if (ret)
+		ath10k_err(ar, "failed to assert core cold rst: %d\n", ret);
+	msleep(1);
+
+	ret = reset_control_assert(ar_ahb->radio_cold_rst);
+	if (ret)
+		ath10k_err(ar, "failed to assert radio cold rst: %d\n", ret);
+	msleep(1);
+
+	ret = reset_control_assert(ar_ahb->radio_warm_rst);
+	if (ret)
+		ath10k_err(ar, "failed to assert radio warm rst: %d\n", ret);
+	msleep(1);
+
+	ret = reset_control_assert(ar_ahb->radio_srif_rst);
+	if (ret)
+		ath10k_err(ar, "failed to assert radio srif rst: %d\n", ret);
+	msleep(1);
+
+	ret = reset_control_assert(ar_ahb->cpu_init_rst);
+	if (ret)
+		ath10k_err(ar, "failed to assert cpu init rst: %d\n", ret);
+	msleep(10);
+
+	/* Clear halt req and core clock disable req before
+	 * deasserting wifi core reset.
+	 */
+	val = ath10k_ahb_tcsr_read32(ar, haltreq_reg);
+	val &= ~AHB_AXI_BUS_HALT_REQ;
+	ath10k_ahb_tcsr_write32(ar, haltreq_reg, val);
+
+	val = ath10k_ahb_tcsr_read32(ar, glb_cfg_reg);
+	val &= ~TCSR_WIFIX_GLB_CFG_DISABLE_CORE_CLK;
+	ath10k_ahb_tcsr_write32(ar, glb_cfg_reg, val);
+
+	ret = reset_control_deassert(ar_ahb->core_cold_rst);
+	if (ret)
+		ath10k_err(ar, "failed to deassert core cold rst: %d\n", ret);
+
+	ath10k_dbg(ar, ATH10K_DBG_AHB, "core %d reset done\n", core_id);
+}
+
 static int ath10k_ahb_probe(struct platform_device *pdev)
 {
 	return 0;
diff --git a/drivers/net/wireless/ath/ath10k/ahb.h b/drivers/net/wireless/ath/ath10k/ahb.h
index 2904b7bc9459..4761eeb475d6 100644
--- a/drivers/net/wireless/ath/ath10k/ahb.h
+++ b/drivers/net/wireless/ath/ath10k/ahb.h
@@ -39,6 +39,21 @@ struct ath10k_ahb {
 
 #ifdef CONFIG_ATH10K_AHB
 
+#define ATH10K_AHB_WLAN_CORE_ID_REG          0x82030
+
+#define ATH10K_AHB_TCSR_WIFI0_GLB_CFG        0x49000
+#define ATH10K_AHB_TCSR_WIFI1_GLB_CFG        0x49004
+#define TCSR_WIFIX_GLB_CFG_DISABLE_CORE_CLK  BIT(25)
+
+#define ATH10K_AHB_TCSR_WCSS0_HALTREQ        0x52000
+#define ATH10K_AHB_TCSR_WCSS1_HALTREQ        0x52010
+#define ATH10K_AHB_TCSR_WCSS0_HALTACK        0x52004
+#define ATH10K_AHB_TCSR_WCSS1_HALTACK        0x52014
+
+#define ATH10K_AHB_AXI_BUS_HALT_TIMEOUT      10 /* msec */
+#define AHB_AXI_BUS_HALT_REQ                 1
+#define AHB_AXI_BUS_HALT_ACK                 1
+
 int ath10k_ahb_init(void);
 void ath10k_ahb_exit(void);
 
-- 
cgit v1.2.3


From 1c44fcb9234c80bbf9e4043deab8492e1c0dcf99 Mon Sep 17 00:00:00 2001
From: Raja Mani <rmani@qti.qualcomm.com>
Date: Wed, 27 Jan 2016 15:24:31 +0530
Subject: ath10k: include irq related functions in ahb

Add irq related functions to register,handle,release,disable interrupt.

qca4019 supports msi interrupt, but it has the problem. Until the issue
gets sorted out, only legacy interrupt model is enabled and used.

Signed-off-by: Raja Mani <rmani@qti.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/ahb.c | 44 +++++++++++++++++++++++++++++++++++
 drivers/net/wireless/ath/ath10k/ahb.h |  2 ++
 2 files changed, 46 insertions(+)

diff --git a/drivers/net/wireless/ath/ath10k/ahb.c b/drivers/net/wireless/ath/ath10k/ahb.c
index 230507890fbf..29d0b6c6b35c 100644
--- a/drivers/net/wireless/ath/ath10k/ahb.c
+++ b/drivers/net/wireless/ath/ath10k/ahb.c
@@ -458,6 +458,50 @@ static void ath10k_ahb_halt_chip(struct ath10k *ar)
 	ath10k_dbg(ar, ATH10K_DBG_AHB, "core %d reset done\n", core_id);
 }
 
+static irqreturn_t ath10k_ahb_interrupt_handler(int irq, void *arg)
+{
+	struct ath10k *ar = arg;
+	struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
+
+	if (!ath10k_pci_irq_pending(ar))
+		return IRQ_NONE;
+
+	ath10k_pci_disable_and_clear_legacy_irq(ar);
+	tasklet_schedule(&ar_pci->intr_tq);
+
+	return IRQ_HANDLED;
+}
+
+static int ath10k_ahb_request_irq_legacy(struct ath10k *ar)
+{
+	struct ath10k_ahb *ar_ahb = ath10k_ahb_priv(ar);
+	int ret;
+
+	ret = request_irq(ar_ahb->irq,
+			  ath10k_ahb_interrupt_handler,
+			  IRQF_SHARED, "ath10k_ahb", ar);
+	if (ret) {
+		ath10k_warn(ar, "failed to request legacy irq %d: %d\n",
+			    ar_ahb->irq, ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static void ath10k_ahb_release_irq_legacy(struct ath10k *ar)
+{
+	struct ath10k_ahb *ar_ahb = ath10k_ahb_priv(ar);
+
+	free_irq(ar_ahb->irq, ar);
+}
+
+static void ath10k_ahb_irq_disable(struct ath10k *ar)
+{
+	ath10k_ce_disable_interrupts(ar);
+	ath10k_pci_disable_and_clear_legacy_irq(ar);
+}
+
 static int ath10k_ahb_probe(struct platform_device *pdev)
 {
 	return 0;
diff --git a/drivers/net/wireless/ath/ath10k/ahb.h b/drivers/net/wireless/ath/ath10k/ahb.h
index 4761eeb475d6..97c40e47dc02 100644
--- a/drivers/net/wireless/ath/ath10k/ahb.h
+++ b/drivers/net/wireless/ath/ath10k/ahb.h
@@ -26,6 +26,8 @@ struct ath10k_ahb {
 	void __iomem *gcc_mem;
 	void __iomem *tcsr_mem;
 
+	int irq;
+
 	struct clk *cmd_clk;
 	struct clk *ref_clk;
 	struct clk *rtc_clk;
-- 
cgit v1.2.3


From 704dc4e36769218145d30c41e81a5fbfed3977c7 Mon Sep 17 00:00:00 2001
From: Raja Mani <rmani@qti.qualcomm.com>
Date: Wed, 27 Jan 2016 15:24:32 +0530
Subject: ath10k: add resource init and deinit in ahb

Add function to gather resources required for qca4019 to operate
(memory, irq, dma setting, clock init , rest control init) and
function release those resources when it's not needed.

Signed-off-by: Raja Mani <rmani@qti.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/ahb.c | 122 ++++++++++++++++++++++++++++++++++
 drivers/net/wireless/ath/ath10k/ahb.h |   7 ++
 2 files changed, 129 insertions(+)

diff --git a/drivers/net/wireless/ath/ath10k/ahb.c b/drivers/net/wireless/ath/ath10k/ahb.c
index 29d0b6c6b35c..d83a864515a2 100644
--- a/drivers/net/wireless/ath/ath10k/ahb.c
+++ b/drivers/net/wireless/ath/ath10k/ahb.c
@@ -15,6 +15,8 @@
  * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
  */
 #include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
 #include <linux/clk.h>
 #include <linux/reset.h>
 #include "core.h"
@@ -502,6 +504,126 @@ static void ath10k_ahb_irq_disable(struct ath10k *ar)
 	ath10k_pci_disable_and_clear_legacy_irq(ar);
 }
 
+static int ath10k_ahb_resource_init(struct ath10k *ar)
+{
+	struct ath10k_ahb *ar_ahb = ath10k_ahb_priv(ar);
+	struct platform_device *pdev;
+	struct device *dev;
+	struct resource *res;
+	int ret;
+
+	pdev = ar_ahb->pdev;
+	dev = &pdev->dev;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		ath10k_err(ar, "failed to get memory resource\n");
+		ret = -ENXIO;
+		goto out;
+	}
+
+	ar_ahb->mem = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(ar_ahb->mem)) {
+		ath10k_err(ar, "mem ioremap error\n");
+		ret = PTR_ERR(ar_ahb->mem);
+		goto out;
+	}
+
+	ar_ahb->mem_len = resource_size(res);
+
+	ar_ahb->gcc_mem = ioremap_nocache(ATH10K_GCC_REG_BASE,
+					  ATH10K_GCC_REG_SIZE);
+	if (!ar_ahb->gcc_mem) {
+		ath10k_err(ar, "gcc mem ioremap error\n");
+		ret = -ENOMEM;
+		goto err_mem_unmap;
+	}
+
+	ar_ahb->tcsr_mem = ioremap_nocache(ATH10K_TCSR_REG_BASE,
+					   ATH10K_TCSR_REG_SIZE);
+	if (!ar_ahb->tcsr_mem) {
+		ath10k_err(ar, "tcsr mem ioremap error\n");
+		ret = -ENOMEM;
+		goto err_gcc_mem_unmap;
+	}
+
+	ret = dma_set_mask(&pdev->dev, DMA_BIT_MASK(32));
+	if (ret) {
+		ath10k_err(ar, "failed to set 32-bit dma mask: %d\n", ret);
+		goto err_tcsr_mem_unmap;
+	}
+
+	ret = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32));
+	if (ret) {
+		ath10k_err(ar, "failed to set 32-bit consistent dma: %d\n",
+			   ret);
+		goto err_tcsr_mem_unmap;
+	}
+
+	ret = ath10k_ahb_clock_init(ar);
+	if (ret)
+		goto err_tcsr_mem_unmap;
+
+	ret = ath10k_ahb_rst_ctrl_init(ar);
+	if (ret)
+		goto err_clock_deinit;
+
+	ar_ahb->irq = platform_get_irq_byname(pdev, "legacy");
+	if (ar_ahb->irq < 0) {
+		ath10k_err(ar, "failed to get irq number: %d\n", ar_ahb->irq);
+		goto err_clock_deinit;
+	}
+
+	ath10k_dbg(ar, ATH10K_DBG_BOOT, "irq: %d\n", ar_ahb->irq);
+
+	ath10k_dbg(ar, ATH10K_DBG_BOOT, "mem: 0x%p mem_len: %lu gcc mem: 0x%p tcsr_mem: 0x%p\n",
+		   ar_ahb->mem, ar_ahb->mem_len,
+		   ar_ahb->gcc_mem, ar_ahb->tcsr_mem);
+	return 0;
+
+err_clock_deinit:
+	ath10k_ahb_clock_deinit(ar);
+
+err_tcsr_mem_unmap:
+	iounmap(ar_ahb->tcsr_mem);
+
+err_gcc_mem_unmap:
+	ar_ahb->tcsr_mem = NULL;
+	iounmap(ar_ahb->gcc_mem);
+
+err_mem_unmap:
+	ar_ahb->gcc_mem = NULL;
+	devm_iounmap(&pdev->dev, ar_ahb->mem);
+
+out:
+	ar_ahb->mem = NULL;
+	return ret;
+}
+
+static void ath10k_ahb_resource_deinit(struct ath10k *ar)
+{
+	struct ath10k_ahb *ar_ahb = ath10k_ahb_priv(ar);
+	struct device *dev;
+
+	dev = &ar_ahb->pdev->dev;
+
+	if (ar_ahb->mem)
+		devm_iounmap(dev, ar_ahb->mem);
+
+	if (ar_ahb->gcc_mem)
+		iounmap(ar_ahb->gcc_mem);
+
+	if (ar_ahb->tcsr_mem)
+		iounmap(ar_ahb->tcsr_mem);
+
+	ar_ahb->mem = NULL;
+	ar_ahb->gcc_mem = NULL;
+	ar_ahb->tcsr_mem = NULL;
+
+	ath10k_ahb_clock_deinit(ar);
+	ath10k_ahb_rst_ctrl_deinit(ar);
+}
+
 static int ath10k_ahb_probe(struct platform_device *pdev)
 {
 	return 0;
diff --git a/drivers/net/wireless/ath/ath10k/ahb.h b/drivers/net/wireless/ath/ath10k/ahb.h
index 97c40e47dc02..5bd01b49132b 100644
--- a/drivers/net/wireless/ath/ath10k/ahb.h
+++ b/drivers/net/wireless/ath/ath10k/ahb.h
@@ -23,6 +23,7 @@
 struct ath10k_ahb {
 	struct platform_device *pdev;
 	void __iomem *mem;
+	unsigned long mem_len;
 	void __iomem *gcc_mem;
 	void __iomem *tcsr_mem;
 
@@ -41,6 +42,12 @@ struct ath10k_ahb {
 
 #ifdef CONFIG_ATH10K_AHB
 
+#define ATH10K_GCC_REG_BASE                  0x1800000
+#define ATH10K_GCC_REG_SIZE                  0x60000
+
+#define ATH10K_TCSR_REG_BASE                 0x1900000
+#define ATH10K_TCSR_REG_SIZE                 0x80000
+
 #define ATH10K_AHB_WLAN_CORE_ID_REG          0x82030
 
 #define ATH10K_AHB_TCSR_WIFI0_GLB_CFG        0x49000
-- 
cgit v1.2.3


From 0d87c9208a17cb82fed66e29180078ab603086ea Mon Sep 17 00:00:00 2001
From: Raja Mani <rmani@qti.qualcomm.com>
Date: Wed, 27 Jan 2016 15:24:33 +0530
Subject: ath10k: expose hif ops for ahb

Like how pci.c exposes hif ops for the bus specific operation,
expose similar hif ops table for ahb with all required functions
linked to it. Many ath10k_pci_* functions are reused here in hif ops
table. If something is not sharable, new functions are added for ahb
and linked to hif ops table.

Finally, make ath10k_ahb_probe/remove() to perform what is expected
out of it.

Signed-off-by: Raja Mani <rmani@qti.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/ahb.c | 271 ++++++++++++++++++++++++++++++++++
 drivers/net/wireless/ath/ath10k/ahb.h |   5 +
 drivers/net/wireless/ath/ath10k/hw.h  |   1 +
 3 files changed, 277 insertions(+)

diff --git a/drivers/net/wireless/ath/ath10k/ahb.c b/drivers/net/wireless/ath/ath10k/ahb.c
index d83a864515a2..bd62bc19e758 100644
--- a/drivers/net/wireless/ath/ath10k/ahb.c
+++ b/drivers/net/wireless/ath/ath10k/ahb.c
@@ -624,13 +624,284 @@ static void ath10k_ahb_resource_deinit(struct ath10k *ar)
 	ath10k_ahb_rst_ctrl_deinit(ar);
 }
 
+static int ath10k_ahb_prepare_device(struct ath10k *ar)
+{
+	u32 val;
+	int ret;
+
+	ret = ath10k_ahb_clock_enable(ar);
+	if (ret) {
+		ath10k_err(ar, "failed to enable clocks\n");
+		return ret;
+	}
+
+	/* Clock for the target is supplied from outside of target (ie,
+	 * external clock module controlled by the host). Target needs
+	 * to know what frequency target cpu is configured which is needed
+	 * for target internal use. Read target cpu frequency info from
+	 * gcc register and write into target's scratch register where
+	 * target expects this information.
+	 */
+	val = ath10k_ahb_gcc_read32(ar, ATH10K_AHB_GCC_FEPLL_PLL_DIV);
+	ath10k_ahb_write32(ar, ATH10K_AHB_WIFI_SCRATCH_5_REG, val);
+
+	ret = ath10k_ahb_release_reset(ar);
+	if (ret)
+		goto err_clk_disable;
+
+	ath10k_ahb_irq_disable(ar);
+
+	ath10k_ahb_write32(ar, FW_INDICATOR_ADDRESS, FW_IND_HOST_READY);
+
+	ret = ath10k_pci_wait_for_target_init(ar);
+	if (ret)
+		goto err_halt_chip;
+
+	return 0;
+
+err_halt_chip:
+	ath10k_ahb_halt_chip(ar);
+
+err_clk_disable:
+	ath10k_ahb_clock_disable(ar);
+
+	return ret;
+}
+
+static int ath10k_ahb_chip_reset(struct ath10k *ar)
+{
+	int ret;
+
+	ath10k_ahb_halt_chip(ar);
+	ath10k_ahb_clock_disable(ar);
+
+	ret = ath10k_ahb_prepare_device(ar);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+static int ath10k_ahb_wake_target_cpu(struct ath10k *ar)
+{
+	u32 addr, val;
+
+	addr = SOC_CORE_BASE_ADDRESS | CORE_CTRL_ADDRESS;
+	val = ath10k_ahb_read32(ar, addr);
+	val |= ATH10K_AHB_CORE_CTRL_CPU_INTR_MASK;
+	ath10k_ahb_write32(ar, addr, val);
+
+	return 0;
+}
+
+static int ath10k_ahb_hif_start(struct ath10k *ar)
+{
+	ath10k_dbg(ar, ATH10K_DBG_BOOT, "boot ahb hif start\n");
+
+	ath10k_ce_enable_interrupts(ar);
+	ath10k_pci_enable_legacy_irq(ar);
+
+	ath10k_pci_rx_post(ar);
+
+	return 0;
+}
+
+static void ath10k_ahb_hif_stop(struct ath10k *ar)
+{
+	struct ath10k_ahb *ar_ahb = ath10k_ahb_priv(ar);
+
+	ath10k_dbg(ar, ATH10K_DBG_BOOT, "boot ahb hif stop\n");
+
+	ath10k_ahb_irq_disable(ar);
+	synchronize_irq(ar_ahb->irq);
+
+	ath10k_pci_flush(ar);
+}
+
+static int ath10k_ahb_hif_power_up(struct ath10k *ar)
+{
+	int ret;
+
+	ath10k_dbg(ar, ATH10K_DBG_BOOT, "boot ahb hif power up\n");
+
+	ret = ath10k_ahb_chip_reset(ar);
+	if (ret) {
+		ath10k_err(ar, "failed to reset chip: %d\n", ret);
+		goto out;
+	}
+
+	ret = ath10k_pci_init_pipes(ar);
+	if (ret) {
+		ath10k_err(ar, "failed to initialize CE: %d\n", ret);
+		goto out;
+	}
+
+	ret = ath10k_pci_init_config(ar);
+	if (ret) {
+		ath10k_err(ar, "failed to setup init config: %d\n", ret);
+		goto err_ce_deinit;
+	}
+
+	ret = ath10k_ahb_wake_target_cpu(ar);
+	if (ret) {
+		ath10k_err(ar, "could not wake up target CPU: %d\n", ret);
+		goto err_ce_deinit;
+	}
+
+	return 0;
+
+err_ce_deinit:
+	ath10k_pci_ce_deinit(ar);
+out:
+	return ret;
+}
+
+static const struct ath10k_hif_ops ath10k_ahb_hif_ops = {
+	.tx_sg                  = ath10k_pci_hif_tx_sg,
+	.diag_read              = ath10k_pci_hif_diag_read,
+	.diag_write             = ath10k_pci_diag_write_mem,
+	.exchange_bmi_msg       = ath10k_pci_hif_exchange_bmi_msg,
+	.start                  = ath10k_ahb_hif_start,
+	.stop                   = ath10k_ahb_hif_stop,
+	.map_service_to_pipe    = ath10k_pci_hif_map_service_to_pipe,
+	.get_default_pipe       = ath10k_pci_hif_get_default_pipe,
+	.send_complete_check    = ath10k_pci_hif_send_complete_check,
+	.get_free_queue_number  = ath10k_pci_hif_get_free_queue_number,
+	.power_up               = ath10k_ahb_hif_power_up,
+	.power_down             = ath10k_pci_hif_power_down,
+	.read32                 = ath10k_ahb_read32,
+	.write32                = ath10k_ahb_write32,
+};
+
+static const struct ath10k_bus_ops ath10k_ahb_bus_ops = {
+	.read32		= ath10k_ahb_read32,
+	.write32	= ath10k_ahb_write32,
+	.get_num_banks	= ath10k_ahb_get_num_banks,
+};
+
 static int ath10k_ahb_probe(struct platform_device *pdev)
 {
+	struct ath10k *ar;
+	struct ath10k_ahb *ar_ahb;
+	struct ath10k_pci *ar_pci;
+	const struct of_device_id *of_id;
+	enum ath10k_hw_rev hw_rev;
+	size_t size;
+	int ret;
+	u32 chip_id;
+
+	of_id = of_match_device(ath10k_ahb_of_match, &pdev->dev);
+	if (!of_id) {
+		dev_err(&pdev->dev, "failed to find matching device tree id\n");
+		return -EINVAL;
+	}
+
+	hw_rev = (enum ath10k_hw_rev)of_id->data;
+
+	size = sizeof(*ar_pci) + sizeof(*ar_ahb);
+	ar = ath10k_core_create(size, &pdev->dev, ATH10K_BUS_AHB,
+				hw_rev, &ath10k_ahb_hif_ops);
+	if (!ar) {
+		dev_err(&pdev->dev, "failed to allocate core\n");
+		return -ENOMEM;
+	}
+
+	ath10k_dbg(ar, ATH10K_DBG_BOOT, "ahb probe\n");
+
+	ar_pci = ath10k_pci_priv(ar);
+	ar_ahb = ath10k_ahb_priv(ar);
+
+	ar_ahb->pdev = pdev;
+	platform_set_drvdata(pdev, ar);
+
+	ret = ath10k_ahb_resource_init(ar);
+	if (ret)
+		goto err_core_destroy;
+
+	ar->dev_id = 0;
+	ar_pci->mem = ar_ahb->mem;
+	ar_pci->mem_len = ar_ahb->mem_len;
+	ar_pci->ar = ar;
+	ar_pci->bus_ops = &ath10k_ahb_bus_ops;
+
+	ret = ath10k_pci_setup_resource(ar);
+	if (ret) {
+		ath10k_err(ar, "failed to setup resource: %d\n", ret);
+		goto err_resource_deinit;
+	}
+
+	ath10k_pci_init_irq_tasklets(ar);
+
+	ret = ath10k_ahb_request_irq_legacy(ar);
+	if (ret)
+		goto err_free_pipes;
+
+	ret = ath10k_ahb_prepare_device(ar);
+	if (ret)
+		goto err_free_irq;
+
+	ath10k_pci_ce_deinit(ar);
+
+	chip_id = ath10k_ahb_soc_read32(ar, SOC_CHIP_ID_ADDRESS);
+	if (chip_id == 0xffffffff) {
+		ath10k_err(ar, "failed to get chip id\n");
+		goto err_halt_device;
+	}
+
+	ret = ath10k_core_register(ar, chip_id);
+	if (ret) {
+		ath10k_err(ar, "failed to register driver core: %d\n", ret);
+		goto err_halt_device;
+	}
+
 	return 0;
+
+err_halt_device:
+	ath10k_ahb_halt_chip(ar);
+	ath10k_ahb_clock_disable(ar);
+
+err_free_irq:
+	ath10k_ahb_release_irq_legacy(ar);
+
+err_free_pipes:
+	ath10k_pci_free_pipes(ar);
+
+err_resource_deinit:
+	ath10k_ahb_resource_deinit(ar);
+
+err_core_destroy:
+	ath10k_core_destroy(ar);
+	platform_set_drvdata(pdev, NULL);
+
+	return ret;
 }
 
 static int ath10k_ahb_remove(struct platform_device *pdev)
 {
+	struct ath10k *ar = platform_get_drvdata(pdev);
+	struct ath10k_ahb *ar_ahb;
+
+	if (!ar)
+		return -EINVAL;
+
+	ar_ahb = ath10k_ahb_priv(ar);
+
+	if (!ar_ahb)
+		return -EINVAL;
+
+	ath10k_dbg(ar, ATH10K_DBG_AHB, "ahb remove\n");
+
+	ath10k_core_unregister(ar);
+	ath10k_ahb_irq_disable(ar);
+	ath10k_ahb_release_irq_legacy(ar);
+	ath10k_pci_release_resource(ar);
+	ath10k_ahb_halt_chip(ar);
+	ath10k_ahb_clock_disable(ar);
+	ath10k_ahb_resource_deinit(ar);
+	ath10k_core_destroy(ar);
+
+	platform_set_drvdata(pdev, NULL);
+
 	return 0;
 }
 
diff --git a/drivers/net/wireless/ath/ath10k/ahb.h b/drivers/net/wireless/ath/ath10k/ahb.h
index 5bd01b49132b..d43e375215c8 100644
--- a/drivers/net/wireless/ath/ath10k/ahb.h
+++ b/drivers/net/wireless/ath/ath10k/ahb.h
@@ -48,6 +48,9 @@ struct ath10k_ahb {
 #define ATH10K_TCSR_REG_BASE                 0x1900000
 #define ATH10K_TCSR_REG_SIZE                 0x80000
 
+#define ATH10K_AHB_GCC_FEPLL_PLL_DIV         0x2f020
+#define ATH10K_AHB_WIFI_SCRATCH_5_REG        0x4f014
+
 #define ATH10K_AHB_WLAN_CORE_ID_REG          0x82030
 
 #define ATH10K_AHB_TCSR_WIFI0_GLB_CFG        0x49000
@@ -63,6 +66,8 @@ struct ath10k_ahb {
 #define AHB_AXI_BUS_HALT_REQ                 1
 #define AHB_AXI_BUS_HALT_ACK                 1
 
+#define ATH10K_AHB_CORE_CTRL_CPU_INTR_MASK   1
+
 int ath10k_ahb_init(void);
 void ath10k_ahb_exit(void);
 
diff --git a/drivers/net/wireless/ath/ath10k/hw.h b/drivers/net/wireless/ath/ath10k/hw.h
index f57a37bfc9f6..4217bdbe9f01 100644
--- a/drivers/net/wireless/ath/ath10k/hw.h
+++ b/drivers/net/wireless/ath/ath10k/hw.h
@@ -605,6 +605,7 @@ enum ath10k_hw_4addr_pad {
 #define FW_INDICATOR_ADDRESS			ar->regs->fw_indicator_address
 #define FW_IND_EVENT_PENDING			1
 #define FW_IND_INITIALIZED			2
+#define FW_IND_HOST_READY			0x80000000
 
 /* HOST_REG interrupt from firmware */
 #define PCIE_INTR_FIRMWARE_MASK			ar->regs->pcie_intr_fw_mask
-- 
cgit v1.2.3


From 1286558e45fd90fd0faf5d41df35f511c51f25e7 Mon Sep 17 00:00:00 2001
From: Felix Fietkau <nbd@openwrt.org>
Date: Fri, 22 Jan 2016 01:56:30 +0100
Subject: ath9k: do not limit the number of DFS channel interfaces to 1

I think this limit was added when CSA with multiple interfaces wasn't
working yet. It should no longer be necessary

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath9k/init.c | 25 +++++--------------------
 1 file changed, 5 insertions(+), 20 deletions(-)

diff --git a/drivers/net/wireless/ath/ath9k/init.c b/drivers/net/wireless/ath/ath9k/init.c
index ab7a1ac37849..d4e0ac946c3a 100644
--- a/drivers/net/wireless/ath/ath9k/init.c
+++ b/drivers/net/wireless/ath/ath9k/init.c
@@ -751,14 +751,6 @@ static const struct ieee80211_iface_combination if_comb_multi[] = {
 
 #endif /* CONFIG_ATH9K_CHANNEL_CONTEXT */
 
-static const struct ieee80211_iface_limit if_dfs_limits[] = {
-	{ .max = 1,	.types = BIT(NL80211_IFTYPE_AP) |
-#ifdef CONFIG_MAC80211_MESH
-				 BIT(NL80211_IFTYPE_MESH_POINT) |
-#endif
-				 BIT(NL80211_IFTYPE_ADHOC) },
-};
-
 static const struct ieee80211_iface_combination if_comb[] = {
 	{
 		.limits = if_limits,
@@ -766,6 +758,11 @@ static const struct ieee80211_iface_combination if_comb[] = {
 		.max_interfaces = 2048,
 		.num_different_channels = 1,
 		.beacon_int_infra_match = true,
+#ifdef CONFIG_ATH9K_DFS_CERTIFIED
+		.radar_detect_widths =	BIT(NL80211_CHAN_WIDTH_20_NOHT) |
+					BIT(NL80211_CHAN_WIDTH_20) |
+					BIT(NL80211_CHAN_WIDTH_40),
+#endif
 	},
 	{
 		.limits = wds_limits,
@@ -774,18 +771,6 @@ static const struct ieee80211_iface_combination if_comb[] = {
 		.num_different_channels = 1,
 		.beacon_int_infra_match = true,
 	},
-#ifdef CONFIG_ATH9K_DFS_CERTIFIED
-	{
-		.limits = if_dfs_limits,
-		.n_limits = ARRAY_SIZE(if_dfs_limits),
-		.max_interfaces = 1,
-		.num_different_channels = 1,
-		.beacon_int_infra_match = true,
-		.radar_detect_widths =	BIT(NL80211_CHAN_WIDTH_20_NOHT) |
-					BIT(NL80211_CHAN_WIDTH_20) |
-					BIT(NL80211_CHAN_WIDTH_40),
-	}
-#endif
 };
 
 #ifdef CONFIG_ATH9K_CHANNEL_CONTEXT
-- 
cgit v1.2.3


From 875e94392ad2be9776c8325d3573160eb1455a2b Mon Sep 17 00:00:00 2001
From: Maya Erez <qca_merez@qca.qualcomm.com>
Date: Thu, 28 Jan 2016 19:24:02 +0200
Subject: wil6210: prevent access to vring_tx_data lock during its init

wil_tx_vring locks the vring_tx_data lock before accessing the TX
vring to check if it is enabled and valid for use.
In case of quick disconnect / connect events for the same station,
spin_lock(&txdata->lock) can be called during the lock initialization
in the vring init function.
To prevent such a race, the TX vrings spin lock should be initialized
once during wil6210 driver initialization.

Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/wil6210/main.c |  3 +++
 drivers/net/wireless/ath/wil6210/txrx.c | 26 +++++++++++++++++++++-----
 2 files changed, 24 insertions(+), 5 deletions(-)

diff --git a/drivers/net/wireless/ath/wil6210/main.c b/drivers/net/wireless/ath/wil6210/main.c
index 0652efed6b5d..712ebbfbdeb8 100644
--- a/drivers/net/wireless/ath/wil6210/main.c
+++ b/drivers/net/wireless/ath/wil6210/main.c
@@ -438,6 +438,9 @@ int wil_priv_init(struct wil6210_priv *wil)
 	for (i = 0; i < WIL6210_MAX_CID; i++)
 		spin_lock_init(&wil->sta[i].tid_rx_lock);
 
+	for (i = 0; i < WIL6210_MAX_TX_RINGS; i++)
+		spin_lock_init(&wil->vring_tx_data[i].lock);
+
 	mutex_init(&wil->mutex);
 	mutex_init(&wil->wmi_mutex);
 	mutex_init(&wil->back_rx_mutex);
diff --git a/drivers/net/wireless/ath/wil6210/txrx.c b/drivers/net/wireless/ath/wil6210/txrx.c
index 9680b970b863..6af20903cf89 100644
--- a/drivers/net/wireless/ath/wil6210/txrx.c
+++ b/drivers/net/wireless/ath/wil6210/txrx.c
@@ -717,6 +717,21 @@ void wil_rx_fini(struct wil6210_priv *wil)
 		wil_vring_free(wil, vring, 0);
 }
 
+static inline void wil_tx_data_init(struct vring_tx_data *txdata)
+{
+	spin_lock_bh(&txdata->lock);
+	txdata->dot1x_open = 0;
+	txdata->enabled = 0;
+	txdata->idle = 0;
+	txdata->last_idle = 0;
+	txdata->begin = 0;
+	txdata->agg_wsize = 0;
+	txdata->agg_timeout = 0;
+	txdata->agg_amsdu = 0;
+	txdata->addba_in_progress = false;
+	spin_unlock_bh(&txdata->lock);
+}
+
 int wil_vring_init_tx(struct wil6210_priv *wil, int id, int size,
 		      int cid, int tid)
 {
@@ -758,8 +773,7 @@ int wil_vring_init_tx(struct wil6210_priv *wil, int id, int size,
 		goto out;
 	}
 
-	memset(txdata, 0, sizeof(*txdata));
-	spin_lock_init(&txdata->lock);
+	wil_tx_data_init(txdata);
 	vring->size = size;
 	rc = wil_vring_alloc(wil, vring);
 	if (rc)
@@ -791,8 +805,10 @@ int wil_vring_init_tx(struct wil6210_priv *wil, int id, int size,
 
 	return 0;
  out_free:
+	spin_lock_bh(&txdata->lock);
 	txdata->dot1x_open = false;
 	txdata->enabled = 0;
+	spin_unlock_bh(&txdata->lock);
 	wil_vring_free(wil, vring, 1);
 	wil->vring2cid_tid[id][0] = WIL6210_MAX_CID;
 	wil->vring2cid_tid[id][1] = 0;
@@ -834,8 +850,7 @@ int wil_vring_init_bcast(struct wil6210_priv *wil, int id, int size)
 		goto out;
 	}
 
-	memset(txdata, 0, sizeof(*txdata));
-	spin_lock_init(&txdata->lock);
+	wil_tx_data_init(txdata);
 	vring->size = size;
 	rc = wil_vring_alloc(wil, vring);
 	if (rc)
@@ -865,8 +880,10 @@ int wil_vring_init_bcast(struct wil6210_priv *wil, int id, int size)
 
 	return 0;
  out_free:
+	spin_lock_bh(&txdata->lock);
 	txdata->enabled = 0;
 	txdata->dot1x_open = false;
+	spin_unlock_bh(&txdata->lock);
 	wil_vring_free(wil, vring, 1);
  out:
 
@@ -894,7 +911,6 @@ void wil_vring_fini_tx(struct wil6210_priv *wil, int id)
 		napi_synchronize(&wil->napi_tx);
 
 	wil_vring_free(wil, vring, 1);
-	memset(txdata, 0, sizeof(*txdata));
 }
 
 static struct vring *wil_find_tx_ucast(struct wil6210_priv *wil,
-- 
cgit v1.2.3


From 78771d76f826202012201d700028a2d866d03fb3 Mon Sep 17 00:00:00 2001
From: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Date: Thu, 28 Jan 2016 19:24:03 +0200
Subject: wil6210: wait for disconnect completion

cfg80211_ops.disconnect() should wait for disconnect flow to
complete. If it does not, internal state becomes out of sync with
one in cfg80211. If one does stress test connect/disconnect
sequence, cfg80211 will issue next connect before disconnect
completed internally.

Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/wil6210/cfg80211.c | 13 ++++++++++++-
 drivers/net/wireless/ath/wil6210/main.c     | 28 +++++++++-------------------
 drivers/net/wireless/ath/wil6210/wil6210.h  |  1 +
 3 files changed, 22 insertions(+), 20 deletions(-)

diff --git a/drivers/net/wireless/ath/wil6210/cfg80211.c b/drivers/net/wireless/ath/wil6210/cfg80211.c
index 774352f9e256..97ad91eef4a6 100644
--- a/drivers/net/wireless/ath/wil6210/cfg80211.c
+++ b/drivers/net/wireless/ath/wil6210/cfg80211.c
@@ -535,7 +535,18 @@ static int wil_cfg80211_disconnect(struct wiphy *wiphy,
 
 	wil_dbg_misc(wil, "%s(reason=%d)\n", __func__, reason_code);
 
-	rc = wmi_send(wil, WMI_DISCONNECT_CMDID, NULL, 0);
+	if (!(test_bit(wil_status_fwconnecting, wil->status) ||
+	      test_bit(wil_status_fwconnected, wil->status))) {
+		wil_err(wil, "%s: Disconnect was called while disconnected\n",
+			__func__);
+		return 0;
+	}
+
+	rc = wmi_call(wil, WMI_DISCONNECT_CMDID, NULL, 0,
+		      WMI_DISCONNECT_EVENTID, NULL, 0,
+		      WIL6210_DISCONNECT_TO_MS);
+	if (rc)
+		wil_err(wil, "%s: disconnect error %d\n", __func__, rc);
 
 	return rc;
 }
diff --git a/drivers/net/wireless/ath/wil6210/main.c b/drivers/net/wireless/ath/wil6210/main.c
index 712ebbfbdeb8..78ba6e04c944 100644
--- a/drivers/net/wireless/ath/wil6210/main.c
+++ b/drivers/net/wireless/ath/wil6210/main.c
@@ -23,9 +23,6 @@
 #include "wmi.h"
 #include "boot_loader.h"
 
-#define WAIT_FOR_DISCONNECT_TIMEOUT_MS 2000
-#define WAIT_FOR_DISCONNECT_INTERVAL_MS 10
-
 bool debug_fw; /* = false; */
 module_param(debug_fw, bool, S_IRUGO);
 MODULE_PARM_DESC(debug_fw, " do not perform card reset. For FW debug");
@@ -942,8 +939,7 @@ int wil_up(struct wil6210_priv *wil)
 
 int __wil_down(struct wil6210_priv *wil)
 {
-	int iter = WAIT_FOR_DISCONNECT_TIMEOUT_MS /
-			WAIT_FOR_DISCONNECT_INTERVAL_MS;
+	int rc;
 
 	WARN_ON(!mutex_is_locked(&wil->mutex));
 
@@ -967,22 +963,16 @@ int __wil_down(struct wil6210_priv *wil)
 	}
 
 	if (test_bit(wil_status_fwconnected, wil->status) ||
-	    test_bit(wil_status_fwconnecting, wil->status))
-		wmi_send(wil, WMI_DISCONNECT_CMDID, NULL, 0);
+	    test_bit(wil_status_fwconnecting, wil->status)) {
 
-	/* make sure wil is idle (not connected) */
-	mutex_unlock(&wil->mutex);
-	while (iter--) {
-		int idle = !test_bit(wil_status_fwconnected, wil->status) &&
-			   !test_bit(wil_status_fwconnecting, wil->status);
-		if (idle)
-			break;
-		msleep(WAIT_FOR_DISCONNECT_INTERVAL_MS);
+		mutex_unlock(&wil->mutex);
+		rc = wmi_call(wil, WMI_DISCONNECT_CMDID, NULL, 0,
+			      WMI_DISCONNECT_EVENTID, NULL, 0,
+			      WIL6210_DISCONNECT_TO_MS);
+		mutex_lock(&wil->mutex);
+		if (rc)
+			wil_err(wil, "timeout waiting for disconnect\n");
 	}
-	mutex_lock(&wil->mutex);
-
-	if (iter < 0)
-		wil_err(wil, "timeout waiting for idle FW/HW\n");
 
 	wil_reset(wil, false);
 
diff --git a/drivers/net/wireless/ath/wil6210/wil6210.h b/drivers/net/wireless/ath/wil6210/wil6210.h
index 1b8fa1d2bae9..950296507dd1 100644
--- a/drivers/net/wireless/ath/wil6210/wil6210.h
+++ b/drivers/net/wireless/ath/wil6210/wil6210.h
@@ -92,6 +92,7 @@ static inline u32 wil_mtu2macbuf(u32 mtu)
 #define WIL6210_FW_RECOVERY_RETRIES	(5) /* try to recover this many times */
 #define WIL6210_FW_RECOVERY_TO	msecs_to_jiffies(5000)
 #define WIL6210_SCAN_TO		msecs_to_jiffies(10000)
+#define WIL6210_DISCONNECT_TO_MS (2000)
 #define WIL6210_RX_HIGH_TRSH_INIT		(0)
 #define WIL6210_RX_HIGH_TRSH_DEFAULT \
 				(1 << (WIL_RX_RING_SIZE_ORDER_DEFAULT - 3))
-- 
cgit v1.2.3


From fe5c271e2878fb080f1b32fec5b4e3f7a6070152 Mon Sep 17 00:00:00 2001
From: Maya Erez <qca_merez@qca.qualcomm.com>
Date: Thu, 28 Jan 2016 19:24:04 +0200
Subject: wil6210: protect synchronous wmi commands handling
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

In case there are multiple WMI commands with the same reply_id,
the following scenario can occur:
- Driver sends the first command to the device
- The reply didn’t get on time and there is timeout
- Reply_id, reply_buf and reply_size are set to 0
- Driver sends second wmi command with the same reply_id as the first
- Driver sets wil->reply_id
- Reply for the first wmi command arrives and handled by wmi_recv_cmd
- As its ID fits the reply_id but the reply_buf is not set yet it is
handled as a reply with event handler, and WARN_ON is printed

This patch guarantee atomic setting of all the reply variables and
prevents the above scenario.

Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/wil6210/wmi.c | 17 +++++++++++++----
 1 file changed, 13 insertions(+), 4 deletions(-)

diff --git a/drivers/net/wireless/ath/wil6210/wmi.c b/drivers/net/wireless/ath/wil6210/wmi.c
index e1a6cb8840ed..493e721c4fa7 100644
--- a/drivers/net/wireless/ath/wil6210/wmi.c
+++ b/drivers/net/wireless/ath/wil6210/wmi.c
@@ -838,6 +838,7 @@ void wmi_recv_cmd(struct wil6210_priv *wil)
 			struct wil6210_mbox_hdr_wmi *wmi = &evt->event.wmi;
 			u16 id = le16_to_cpu(wmi->id);
 			u32 tstamp = le32_to_cpu(wmi->timestamp);
+			spin_lock_irqsave(&wil->wmi_ev_lock, flags);
 			if (wil->reply_id && wil->reply_id == id) {
 				if (wil->reply_buf) {
 					memcpy(wil->reply_buf, wmi,
@@ -845,6 +846,7 @@ void wmi_recv_cmd(struct wil6210_priv *wil)
 					immed_reply = true;
 				}
 			}
+			spin_unlock_irqrestore(&wil->wmi_ev_lock, flags);
 
 			wil_dbg_wmi(wil, "WMI event 0x%04x MID %d @%d msec\n",
 				    id, wmi->mid, tstamp);
@@ -888,13 +890,16 @@ int wmi_call(struct wil6210_priv *wil, u16 cmdid, void *buf, u16 len,
 
 	mutex_lock(&wil->wmi_mutex);
 
+	spin_lock(&wil->wmi_ev_lock);
+	wil->reply_id = reply_id;
+	wil->reply_buf = reply;
+	wil->reply_size = reply_size;
+	spin_unlock(&wil->wmi_ev_lock);
+
 	rc = __wmi_send(wil, cmdid, buf, len);
 	if (rc)
 		goto out;
 
-	wil->reply_id = reply_id;
-	wil->reply_buf = reply;
-	wil->reply_size = reply_size;
 	remain = wait_for_completion_timeout(&wil->wmi_call,
 					     msecs_to_jiffies(to_msec));
 	if (0 == remain) {
@@ -907,10 +912,14 @@ int wmi_call(struct wil6210_priv *wil, u16 cmdid, void *buf, u16 len,
 			    cmdid, reply_id,
 			    to_msec - jiffies_to_msecs(remain));
 	}
+
+out:
+	spin_lock(&wil->wmi_ev_lock);
 	wil->reply_id = 0;
 	wil->reply_buf = NULL;
 	wil->reply_size = 0;
- out:
+	spin_unlock(&wil->wmi_ev_lock);
+
 	mutex_unlock(&wil->wmi_mutex);
 
 	return rc;
-- 
cgit v1.2.3


From ee5dfe0d240e21afe63bdd77bf1d4a386203aa6e Mon Sep 17 00:00:00 2001
From: Hamad Kadmany <qca_hkadmany@qca.qualcomm.com>
Date: Thu, 28 Jan 2016 19:24:05 +0200
Subject: wil6210: TX vring optimization

Tx vring needs to be enlarged to get better
performance for traffic over 2Gbps.

Signed-off-by: Hamad Kadmany <qca_hkadmany@qca.qualcomm.com>
Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/wil6210/debugfs.c | 6 +++---
 drivers/net/wireless/ath/wil6210/wil6210.h | 2 +-
 2 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/net/wireless/ath/wil6210/debugfs.c b/drivers/net/wireless/ath/wil6210/debugfs.c
index 97bc186f9728..98c9148a3450 100644
--- a/drivers/net/wireless/ath/wil6210/debugfs.c
+++ b/drivers/net/wireless/ath/wil6210/debugfs.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2012-2015 Qualcomm Atheros, Inc.
+ * Copyright (c) 2012-2016 Qualcomm Atheros, Inc.
  *
  * Permission to use, copy, modify, and/or distribute this software for any
  * purpose with or without fee is hereby granted, provided that the above
@@ -68,13 +68,13 @@ static void wil_print_vring(struct seq_file *s, struct wil6210_priv *wil,
 		seq_puts(s, "???\n");
 	}
 
-	if (vring->va && (vring->size < 1025)) {
+	if (vring->va && (vring->size <= (1 << WIL_RING_SIZE_ORDER_MAX))) {
 		uint i;
 
 		for (i = 0; i < vring->size; i++) {
 			volatile struct vring_tx_desc *d = &vring->va[i].tx;
 
-			if ((i % 64) == 0 && (i != 0))
+			if ((i % 128) == 0 && (i != 0))
 				seq_puts(s, "\n");
 			seq_printf(s, "%c", (d->dma.status & BIT(0)) ?
 					_s : (vring->ctx[i].skb ? _h : 'h'));
diff --git a/drivers/net/wireless/ath/wil6210/wil6210.h b/drivers/net/wireless/ath/wil6210/wil6210.h
index 950296507dd1..8427d68b6fa8 100644
--- a/drivers/net/wireless/ath/wil6210/wil6210.h
+++ b/drivers/net/wireless/ath/wil6210/wil6210.h
@@ -51,7 +51,7 @@ static inline u32 WIL_GET_BITS(u32 x, int b0, int b1)
 
 #define WIL_TX_Q_LEN_DEFAULT		(4000)
 #define WIL_RX_RING_SIZE_ORDER_DEFAULT	(10)
-#define WIL_TX_RING_SIZE_ORDER_DEFAULT	(10)
+#define WIL_TX_RING_SIZE_ORDER_DEFAULT	(12)
 #define WIL_BCAST_RING_SIZE_ORDER_DEFAULT	(7)
 #define WIL_BCAST_MCS0_LIMIT		(1024) /* limit for MCS0 frame size */
 /* limit ring size in range [32..32k] */
-- 
cgit v1.2.3


From 0b3d76e9f8b4a2b67358b454843ede30555f93a5 Mon Sep 17 00:00:00 2001
From: Peter Oh <poh@qca.qualcomm.com>
Date: Thu, 28 Jan 2016 13:54:07 -0800
Subject: ath10k: rename Mesh related service names

WMI_10_4_SERVICE_MESH bit is for non IEEE802.11s Mesh.
Hence rename it to WMI_10_4_SERVICE_MESH_NON_11S.
Also add _11S as post-fix to each of WMI_SERVICE_MESH and
WMI_VDEV_SUBTYPE_MESH specifying the service is for 11s Mesh.
This will help users to distinguish 11s Mesh from non 11s Mesh.

Signed-off-by: Peter Oh <poh@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/mac.c |  4 ++--
 drivers/net/wireless/ath/ath10k/wmi.h | 16 +++++++++-------
 2 files changed, 11 insertions(+), 9 deletions(-)

diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index ef0438d2cc8f..1406b0f1d883 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -4380,8 +4380,8 @@ static int ath10k_add_interface(struct ieee80211_hw *hw,
 		arvif->vdev_type = WMI_VDEV_TYPE_IBSS;
 		break;
 	case NL80211_IFTYPE_MESH_POINT:
-		if (test_bit(WMI_SERVICE_MESH, ar->wmi.svc_map)) {
-			arvif->vdev_subtype = WMI_VDEV_SUBTYPE_MESH;
+		if (test_bit(WMI_SERVICE_MESH_11S, ar->wmi.svc_map)) {
+			arvif->vdev_subtype = WMI_VDEV_SUBTYPE_MESH_11S;
 		} else if (!test_bit(ATH10K_FLAG_RAW_MODE, &ar->dev_flags)) {
 			ret = -EINVAL;
 			ath10k_warn(ar, "must load driver with rawmode=1 to add mesh interfaces\n");
diff --git a/drivers/net/wireless/ath/ath10k/wmi.h b/drivers/net/wireless/ath/ath10k/wmi.h
index 806d4bb6e7d6..0458bf6bcdfc 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.h
+++ b/drivers/net/wireless/ath/ath10k/wmi.h
@@ -176,7 +176,8 @@ enum wmi_service {
 	WMI_SERVICE_AUX_CHAN_LOAD_INTF,
 	WMI_SERVICE_BSS_CHANNEL_INFO_64,
 	WMI_SERVICE_EXT_RES_CFG_SUPPORT,
-	WMI_SERVICE_MESH,
+	WMI_SERVICE_MESH_11S,
+	WMI_SERVICE_MESH_NON_11S,
 	WMI_SERVICE_PEER_STATS,
 
 	/* keep last */
@@ -296,7 +297,7 @@ enum wmi_10_4_service {
 	WMI_10_4_SERVICE_AUX_CHAN_LOAD_INTF,
 	WMI_10_4_SERVICE_BSS_CHANNEL_INFO_64,
 	WMI_10_4_SERVICE_EXT_RES_CFG_SUPPORT,
-	WMI_10_4_SERVICE_MESH,
+	WMI_10_4_SERVICE_MESH_NON_11S,
 };
 
 static inline char *wmi_service_name(int service_id)
@@ -387,7 +388,8 @@ static inline char *wmi_service_name(int service_id)
 	SVCSTR(WMI_SERVICE_AUX_CHAN_LOAD_INTF);
 	SVCSTR(WMI_SERVICE_BSS_CHANNEL_INFO_64);
 	SVCSTR(WMI_SERVICE_EXT_RES_CFG_SUPPORT);
-	SVCSTR(WMI_SERVICE_MESH);
+	SVCSTR(WMI_SERVICE_MESH_11S);
+	SVCSTR(WMI_SERVICE_MESH_NON_11S);
 	SVCSTR(WMI_SERVICE_PEER_STATS);
 	default:
 		return NULL;
@@ -463,7 +465,7 @@ static inline void wmi_10x_svc_map(const __le32 *in, unsigned long *out,
 	SVCMAP(WMI_10X_SERVICE_BSS_CHANNEL_INFO_64,
 	       WMI_SERVICE_BSS_CHANNEL_INFO_64, len);
 	SVCMAP(WMI_10X_SERVICE_MESH,
-	       WMI_SERVICE_MESH, len);
+	       WMI_SERVICE_MESH_11S, len);
 	SVCMAP(WMI_10X_SERVICE_EXT_RES_CFG_SUPPORT,
 	       WMI_SERVICE_EXT_RES_CFG_SUPPORT, len);
 	SVCMAP(WMI_10X_SERVICE_PEER_STATS,
@@ -628,8 +630,8 @@ static inline void wmi_10_4_svc_map(const __le32 *in, unsigned long *out,
 	       WMI_SERVICE_BSS_CHANNEL_INFO_64, len);
 	SVCMAP(WMI_10_4_SERVICE_EXT_RES_CFG_SUPPORT,
 	       WMI_SERVICE_EXT_RES_CFG_SUPPORT, len);
-	SVCMAP(WMI_10_4_SERVICE_MESH,
-	       WMI_SERVICE_MESH, len);
+	SVCMAP(WMI_10_4_SERVICE_MESH_NON_11S,
+	       WMI_SERVICE_MESH_NON_11S, len);
 }
 
 #undef SVCMAP
@@ -4287,7 +4289,7 @@ enum wmi_vdev_subtype {
 	WMI_VDEV_SUBTYPE_P2P_CLIENT = 2,
 	WMI_VDEV_SUBTYPE_P2P_GO     = 3,
 	WMI_VDEV_SUBTYPE_PROXY_STA	= 4,
-	WMI_VDEV_SUBTYPE_MESH		= 5,
+	WMI_VDEV_SUBTYPE_MESH_11S   = 5,
 };
 
 /* values for vdev_subtype */
-- 
cgit v1.2.3


From e70e9ba9df8609908c34d042cf980c1a59c56900 Mon Sep 17 00:00:00 2001
From: Peter Oh <poh@qca.qualcomm.com>
Date: Thu, 28 Jan 2016 13:54:08 -0800
Subject: ath10k: update 10.4 WMI service map

Update 10.4 WMI service map to sync to the latest 10.4 firmware
as of 1/20/2016.

Signed-off-by: Peter Oh <poh@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/wmi.h | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/drivers/net/wireless/ath/ath10k/wmi.h b/drivers/net/wireless/ath/ath10k/wmi.h
index 0458bf6bcdfc..031018a07231 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.h
+++ b/drivers/net/wireless/ath/ath10k/wmi.h
@@ -179,6 +179,7 @@ enum wmi_service {
 	WMI_SERVICE_MESH_11S,
 	WMI_SERVICE_MESH_NON_11S,
 	WMI_SERVICE_PEER_STATS,
+	WMI_SERVICE_RESTRT_CHNL_SUPPORT,
 
 	/* keep last */
 	WMI_SERVICE_MAX,
@@ -298,6 +299,9 @@ enum wmi_10_4_service {
 	WMI_10_4_SERVICE_BSS_CHANNEL_INFO_64,
 	WMI_10_4_SERVICE_EXT_RES_CFG_SUPPORT,
 	WMI_10_4_SERVICE_MESH_NON_11S,
+	WMI_10_4_SERVICE_RESTRT_CHNL_SUPPORT,
+	WMI_10_4_SERVICE_PEER_STATS,
+	WMI_10_4_SERVICE_MESH_11S,
 };
 
 static inline char *wmi_service_name(int service_id)
@@ -391,6 +395,7 @@ static inline char *wmi_service_name(int service_id)
 	SVCSTR(WMI_SERVICE_MESH_11S);
 	SVCSTR(WMI_SERVICE_MESH_NON_11S);
 	SVCSTR(WMI_SERVICE_PEER_STATS);
+	SVCSTR(WMI_SERVICE_RESTRT_CHNL_SUPPORT);
 	default:
 		return NULL;
 	}
@@ -632,6 +637,12 @@ static inline void wmi_10_4_svc_map(const __le32 *in, unsigned long *out,
 	       WMI_SERVICE_EXT_RES_CFG_SUPPORT, len);
 	SVCMAP(WMI_10_4_SERVICE_MESH_NON_11S,
 	       WMI_SERVICE_MESH_NON_11S, len);
+	SVCMAP(WMI_10_4_SERVICE_RESTRT_CHNL_SUPPORT,
+	       WMI_SERVICE_RESTRT_CHNL_SUPPORT, len);
+	SVCMAP(WMI_10_4_SERVICE_PEER_STATS,
+	       WMI_SERVICE_PEER_STATS, len);
+	SVCMAP(WMI_10_4_SERVICE_MESH_11S,
+	       WMI_SERVICE_MESH_11S, len);
 }
 
 #undef SVCMAP
-- 
cgit v1.2.3


From 08c27be1db84dcdad14e86ec76d9c9915deb14eb Mon Sep 17 00:00:00 2001
From: Peter Oh <poh@qca.qualcomm.com>
Date: Thu, 28 Jan 2016 13:54:09 -0800
Subject: ath10k: use vif->type and vif->p2p for P2P_GO check

Interface type P2P_GO can be checked by either arvif->vdev_type
and arvif->vdev_subtype or vif->type and vif->p2p.
Use later one to avoid more cpu consumption that could happen
when subtype abstraction layer change is introduced.

Signed-off-by: Peter Oh <poh@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/mac.c | 8 ++------
 drivers/net/wireless/ath/ath10k/wmi.c | 2 +-
 2 files changed, 3 insertions(+), 7 deletions(-)

diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index 1406b0f1d883..addf3cb3aeb1 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -1358,10 +1358,7 @@ static int ath10k_mac_setup_bcn_p2p_ie(struct ath10k_vif *arvif,
 	const u8 *p2p_ie;
 	int ret;
 
-	if (arvif->vdev_type != WMI_VDEV_TYPE_AP)
-		return 0;
-
-	if (arvif->vdev_subtype != WMI_VDEV_SUBTYPE_P2P_GO)
+	if (arvif->vif->type != NL80211_IFTYPE_AP || !arvif->vif->p2p)
 		return 0;
 
 	mgmt = (void *)bcn->data;
@@ -3259,8 +3256,7 @@ static void ath10k_tx_h_add_p2p_noa_ie(struct ath10k *ar,
 	struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif);
 
 	/* This is case only for P2P_GO */
-	if (arvif->vdev_type != WMI_VDEV_TYPE_AP ||
-	    arvif->vdev_subtype != WMI_VDEV_SUBTYPE_P2P_GO)
+	if (vif->type != NL80211_IFTYPE_AP || !vif->p2p)
 		return;
 
 	if (unlikely(ieee80211_is_probe_resp(hdr->frame_control))) {
diff --git a/drivers/net/wireless/ath/ath10k/wmi.c b/drivers/net/wireless/ath/ath10k/wmi.c
index 0f01a8d99604..5158716d6dff 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.c
+++ b/drivers/net/wireless/ath/ath10k/wmi.c
@@ -3196,7 +3196,7 @@ static void ath10k_wmi_update_noa(struct ath10k *ar, struct ath10k_vif *arvif,
 				  struct sk_buff *bcn,
 				  const struct wmi_p2p_noa_info *noa)
 {
-	if (arvif->vdev_subtype != WMI_VDEV_SUBTYPE_P2P_GO)
+	if (!arvif->vif->p2p)
 		return;
 
 	ath10k_dbg(ar, ATH10K_DBG_MGMT, "noa changed: %d\n", noa->changed);
-- 
cgit v1.2.3


From 6e4de1a49aa3254f46f66db5aac530707c193cde Mon Sep 17 00:00:00 2001
From: Peter Oh <poh@qca.qualcomm.com>
Date: Thu, 28 Jan 2016 13:54:10 -0800
Subject: ath10k: add abstraction layer for vdev subtype

Abstraction layer for vdev subtype is added to solve
subtype mismatch and to give flexible compatibility
among different firmware revisions.

For instance, 10.2 and 10.4 firmware has different
definition of their vdev subtypes for Mesh.
10.4 defined subtype 6 for 802.11s Mesh while 10.2 uses 5.
Hence use the abstraction API to get right subtype to use.

Signed-off-by: Peter Oh <poh@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/mac.c     | 15 ++++---
 drivers/net/wireless/ath/ath10k/wmi-ops.h | 11 +++++
 drivers/net/wireless/ath/ath10k/wmi-tlv.c |  1 +
 drivers/net/wireless/ath/ath10k/wmi.c     | 70 +++++++++++++++++++++++++++++++
 drivers/net/wireless/ath/ath10k/wmi.h     | 42 ++++++++++++++++---
 5 files changed, 128 insertions(+), 11 deletions(-)

diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index addf3cb3aeb1..96e2f8ad22fc 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -4359,25 +4359,29 @@ static int ath10k_add_interface(struct ieee80211_hw *hw,
 		   bit, ar->free_vdev_map);
 
 	arvif->vdev_id = bit;
-	arvif->vdev_subtype = WMI_VDEV_SUBTYPE_NONE;
+	arvif->vdev_subtype =
+		ath10k_wmi_get_vdev_subtype(ar, WMI_VDEV_SUBTYPE_NONE);
 
 	switch (vif->type) {
 	case NL80211_IFTYPE_P2P_DEVICE:
 		arvif->vdev_type = WMI_VDEV_TYPE_STA;
-		arvif->vdev_subtype = WMI_VDEV_SUBTYPE_P2P_DEVICE;
+		arvif->vdev_subtype = ath10k_wmi_get_vdev_subtype
+					(ar, WMI_VDEV_SUBTYPE_P2P_DEVICE);
 		break;
 	case NL80211_IFTYPE_UNSPECIFIED:
 	case NL80211_IFTYPE_STATION:
 		arvif->vdev_type = WMI_VDEV_TYPE_STA;
 		if (vif->p2p)
-			arvif->vdev_subtype = WMI_VDEV_SUBTYPE_P2P_CLIENT;
+			arvif->vdev_subtype = ath10k_wmi_get_vdev_subtype
+					(ar, WMI_VDEV_SUBTYPE_P2P_CLIENT);
 		break;
 	case NL80211_IFTYPE_ADHOC:
 		arvif->vdev_type = WMI_VDEV_TYPE_IBSS;
 		break;
 	case NL80211_IFTYPE_MESH_POINT:
 		if (test_bit(WMI_SERVICE_MESH_11S, ar->wmi.svc_map)) {
-			arvif->vdev_subtype = WMI_VDEV_SUBTYPE_MESH_11S;
+			arvif->vdev_subtype = ath10k_wmi_get_vdev_subtype
+						(ar, WMI_VDEV_SUBTYPE_MESH_11S);
 		} else if (!test_bit(ATH10K_FLAG_RAW_MODE, &ar->dev_flags)) {
 			ret = -EINVAL;
 			ath10k_warn(ar, "must load driver with rawmode=1 to add mesh interfaces\n");
@@ -4389,7 +4393,8 @@ static int ath10k_add_interface(struct ieee80211_hw *hw,
 		arvif->vdev_type = WMI_VDEV_TYPE_AP;
 
 		if (vif->p2p)
-			arvif->vdev_subtype = WMI_VDEV_SUBTYPE_P2P_GO;
+			arvif->vdev_subtype = ath10k_wmi_get_vdev_subtype
+						(ar, WMI_VDEV_SUBTYPE_P2P_GO);
 		break;
 	case NL80211_IFTYPE_MONITOR:
 		arvif->vdev_type = WMI_VDEV_TYPE_MONITOR;
diff --git a/drivers/net/wireless/ath/ath10k/wmi-ops.h b/drivers/net/wireless/ath/ath10k/wmi-ops.h
index 8f4f6a892581..32ab34edceb5 100644
--- a/drivers/net/wireless/ath/ath10k/wmi-ops.h
+++ b/drivers/net/wireless/ath/ath10k/wmi-ops.h
@@ -186,6 +186,8 @@ struct wmi_ops {
 							u8 enable,
 							u32 detect_level,
 							u32 detect_margin);
+	int (*get_vdev_subtype)(struct ath10k *ar,
+				enum wmi_vdev_subtype subtype);
 };
 
 int ath10k_wmi_cmd_send(struct ath10k *ar, struct sk_buff *skb, u32 cmd_id);
@@ -1327,4 +1329,13 @@ ath10k_wmi_pdev_enable_adaptive_cca(struct ath10k *ar, u8 enable,
 				   ar->wmi.cmd->pdev_enable_adaptive_cca_cmdid);
 }
 
+static inline int
+ath10k_wmi_get_vdev_subtype(struct ath10k *ar, enum wmi_vdev_subtype subtype)
+{
+	if (!ar->wmi.ops->get_vdev_subtype)
+		return -EOPNOTSUPP;
+
+	return ar->wmi.ops->get_vdev_subtype(ar, subtype);
+}
+
 #endif
diff --git a/drivers/net/wireless/ath/ath10k/wmi-tlv.c b/drivers/net/wireless/ath/ath10k/wmi-tlv.c
index 3b3a27b859f3..108593202052 100644
--- a/drivers/net/wireless/ath/ath10k/wmi-tlv.c
+++ b/drivers/net/wireless/ath/ath10k/wmi-tlv.c
@@ -3483,6 +3483,7 @@ static const struct wmi_ops wmi_tlv_ops = {
 	.gen_tdls_peer_update = ath10k_wmi_tlv_op_gen_tdls_peer_update,
 	.gen_adaptive_qcs = ath10k_wmi_tlv_op_gen_adaptive_qcs,
 	.fw_stats_fill = ath10k_wmi_main_op_fw_stats_fill,
+	.get_vdev_subtype = ath10k_wmi_op_get_vdev_subtype,
 };
 
 static const struct wmi_peer_flags_map wmi_tlv_peer_flags_map = {
diff --git a/drivers/net/wireless/ath/ath10k/wmi.c b/drivers/net/wireless/ath/ath10k/wmi.c
index 5158716d6dff..04799c73ebc8 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.c
+++ b/drivers/net/wireless/ath/ath10k/wmi.c
@@ -7413,6 +7413,71 @@ unlock:
 		buf[len] = 0;
 }
 
+int ath10k_wmi_op_get_vdev_subtype(struct ath10k *ar,
+				   enum wmi_vdev_subtype subtype)
+{
+	switch (subtype) {
+	case WMI_VDEV_SUBTYPE_NONE:
+		return WMI_VDEV_SUBTYPE_LEGACY_NONE;
+	case WMI_VDEV_SUBTYPE_P2P_DEVICE:
+		return WMI_VDEV_SUBTYPE_LEGACY_P2P_DEV;
+	case WMI_VDEV_SUBTYPE_P2P_CLIENT:
+		return WMI_VDEV_SUBTYPE_LEGACY_P2P_CLI;
+	case WMI_VDEV_SUBTYPE_P2P_GO:
+		return WMI_VDEV_SUBTYPE_LEGACY_P2P_GO;
+	case WMI_VDEV_SUBTYPE_PROXY_STA:
+		return WMI_VDEV_SUBTYPE_LEGACY_PROXY_STA;
+	case WMI_VDEV_SUBTYPE_MESH_11S:
+	case WMI_VDEV_SUBTYPE_MESH_NON_11S:
+		return -ENOTSUPP;
+	}
+	return -ENOTSUPP;
+}
+
+static int ath10k_wmi_10_2_4_op_get_vdev_subtype(struct ath10k *ar,
+						 enum wmi_vdev_subtype subtype)
+{
+	switch (subtype) {
+	case WMI_VDEV_SUBTYPE_NONE:
+		return WMI_VDEV_SUBTYPE_10_2_4_NONE;
+	case WMI_VDEV_SUBTYPE_P2P_DEVICE:
+		return WMI_VDEV_SUBTYPE_10_2_4_P2P_DEV;
+	case WMI_VDEV_SUBTYPE_P2P_CLIENT:
+		return WMI_VDEV_SUBTYPE_10_2_4_P2P_CLI;
+	case WMI_VDEV_SUBTYPE_P2P_GO:
+		return WMI_VDEV_SUBTYPE_10_2_4_P2P_GO;
+	case WMI_VDEV_SUBTYPE_PROXY_STA:
+		return WMI_VDEV_SUBTYPE_10_2_4_PROXY_STA;
+	case WMI_VDEV_SUBTYPE_MESH_11S:
+		return WMI_VDEV_SUBTYPE_10_2_4_MESH_11S;
+	case WMI_VDEV_SUBTYPE_MESH_NON_11S:
+		return -ENOTSUPP;
+	}
+	return -ENOTSUPP;
+}
+
+static int ath10k_wmi_10_4_op_get_vdev_subtype(struct ath10k *ar,
+					       enum wmi_vdev_subtype subtype)
+{
+	switch (subtype) {
+	case WMI_VDEV_SUBTYPE_NONE:
+		return WMI_VDEV_SUBTYPE_10_4_NONE;
+	case WMI_VDEV_SUBTYPE_P2P_DEVICE:
+		return WMI_VDEV_SUBTYPE_10_4_P2P_DEV;
+	case WMI_VDEV_SUBTYPE_P2P_CLIENT:
+		return WMI_VDEV_SUBTYPE_10_4_P2P_CLI;
+	case WMI_VDEV_SUBTYPE_P2P_GO:
+		return WMI_VDEV_SUBTYPE_10_4_P2P_GO;
+	case WMI_VDEV_SUBTYPE_PROXY_STA:
+		return WMI_VDEV_SUBTYPE_10_4_PROXY_STA;
+	case WMI_VDEV_SUBTYPE_MESH_11S:
+		return WMI_VDEV_SUBTYPE_10_4_MESH_11S;
+	case WMI_VDEV_SUBTYPE_MESH_NON_11S:
+		return WMI_VDEV_SUBTYPE_10_4_MESH_NON_11S;
+	}
+	return -ENOTSUPP;
+}
+
 static const struct wmi_ops wmi_ops = {
 	.rx = ath10k_wmi_op_rx,
 	.map_svc = wmi_main_svc_map,
@@ -7472,6 +7537,7 @@ static const struct wmi_ops wmi_ops = {
 	.gen_addba_set_resp = ath10k_wmi_op_gen_addba_set_resp,
 	.gen_delba_send = ath10k_wmi_op_gen_delba_send,
 	.fw_stats_fill = ath10k_wmi_main_op_fw_stats_fill,
+	.get_vdev_subtype = ath10k_wmi_op_get_vdev_subtype,
 	/* .gen_bcn_tmpl not implemented */
 	/* .gen_prb_tmpl not implemented */
 	/* .gen_p2p_go_bcn_ie not implemented */
@@ -7539,6 +7605,7 @@ static const struct wmi_ops wmi_10_1_ops = {
 	.gen_addba_set_resp = ath10k_wmi_op_gen_addba_set_resp,
 	.gen_delba_send = ath10k_wmi_op_gen_delba_send,
 	.fw_stats_fill = ath10k_wmi_10x_op_fw_stats_fill,
+	.get_vdev_subtype = ath10k_wmi_op_get_vdev_subtype,
 	/* .gen_bcn_tmpl not implemented */
 	/* .gen_prb_tmpl not implemented */
 	/* .gen_p2p_go_bcn_ie not implemented */
@@ -7607,6 +7674,7 @@ static const struct wmi_ops wmi_10_2_ops = {
 	.gen_addba_set_resp = ath10k_wmi_op_gen_addba_set_resp,
 	.gen_delba_send = ath10k_wmi_op_gen_delba_send,
 	.fw_stats_fill = ath10k_wmi_10x_op_fw_stats_fill,
+	.get_vdev_subtype = ath10k_wmi_op_get_vdev_subtype,
 	/* .gen_pdev_enable_adaptive_cca not implemented */
 };
 
@@ -7673,6 +7741,7 @@ static const struct wmi_ops wmi_10_2_4_ops = {
 	.fw_stats_fill = ath10k_wmi_10x_op_fw_stats_fill,
 	.gen_pdev_enable_adaptive_cca =
 		ath10k_wmi_op_gen_pdev_enable_adaptive_cca,
+	.get_vdev_subtype = ath10k_wmi_10_2_4_op_get_vdev_subtype,
 	/* .gen_bcn_tmpl not implemented */
 	/* .gen_prb_tmpl not implemented */
 	/* .gen_p2p_go_bcn_ie not implemented */
@@ -7739,6 +7808,7 @@ static const struct wmi_ops wmi_10_4_ops = {
 	/* shared with 10.2 */
 	.gen_request_stats = ath10k_wmi_op_gen_request_stats,
 	.gen_pdev_get_temperature = ath10k_wmi_10_2_op_gen_pdev_get_temperature,
+	.get_vdev_subtype = ath10k_wmi_10_4_op_get_vdev_subtype,
 };
 
 int ath10k_wmi_attach(struct ath10k *ar)
diff --git a/drivers/net/wireless/ath/ath10k/wmi.h b/drivers/net/wireless/ath/ath10k/wmi.h
index 031018a07231..049c61820765 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.h
+++ b/drivers/net/wireless/ath/ath10k/wmi.h
@@ -4295,12 +4295,40 @@ enum wmi_vdev_type {
 };
 
 enum wmi_vdev_subtype {
-	WMI_VDEV_SUBTYPE_NONE       = 0,
-	WMI_VDEV_SUBTYPE_P2P_DEVICE = 1,
-	WMI_VDEV_SUBTYPE_P2P_CLIENT = 2,
-	WMI_VDEV_SUBTYPE_P2P_GO     = 3,
-	WMI_VDEV_SUBTYPE_PROXY_STA	= 4,
-	WMI_VDEV_SUBTYPE_MESH_11S   = 5,
+	WMI_VDEV_SUBTYPE_NONE,
+	WMI_VDEV_SUBTYPE_P2P_DEVICE,
+	WMI_VDEV_SUBTYPE_P2P_CLIENT,
+	WMI_VDEV_SUBTYPE_P2P_GO,
+	WMI_VDEV_SUBTYPE_PROXY_STA,
+	WMI_VDEV_SUBTYPE_MESH_11S,
+	WMI_VDEV_SUBTYPE_MESH_NON_11S,
+};
+
+enum wmi_vdev_subtype_legacy {
+	WMI_VDEV_SUBTYPE_LEGACY_NONE      = 0,
+	WMI_VDEV_SUBTYPE_LEGACY_P2P_DEV   = 1,
+	WMI_VDEV_SUBTYPE_LEGACY_P2P_CLI   = 2,
+	WMI_VDEV_SUBTYPE_LEGACY_P2P_GO    = 3,
+	WMI_VDEV_SUBTYPE_LEGACY_PROXY_STA = 4,
+};
+
+enum wmi_vdev_subtype_10_2_4 {
+	WMI_VDEV_SUBTYPE_10_2_4_NONE      = 0,
+	WMI_VDEV_SUBTYPE_10_2_4_P2P_DEV   = 1,
+	WMI_VDEV_SUBTYPE_10_2_4_P2P_CLI   = 2,
+	WMI_VDEV_SUBTYPE_10_2_4_P2P_GO    = 3,
+	WMI_VDEV_SUBTYPE_10_2_4_PROXY_STA = 4,
+	WMI_VDEV_SUBTYPE_10_2_4_MESH_11S  = 5,
+};
+
+enum wmi_vdev_subtype_10_4 {
+	WMI_VDEV_SUBTYPE_10_4_NONE         = 0,
+	WMI_VDEV_SUBTYPE_10_4_P2P_DEV      = 1,
+	WMI_VDEV_SUBTYPE_10_4_P2P_CLI      = 2,
+	WMI_VDEV_SUBTYPE_10_4_P2P_GO       = 3,
+	WMI_VDEV_SUBTYPE_10_4_PROXY_STA    = 4,
+	WMI_VDEV_SUBTYPE_10_4_MESH_NON_11S = 5,
+	WMI_VDEV_SUBTYPE_10_4_MESH_11S     = 6,
 };
 
 /* values for vdev_subtype */
@@ -6471,5 +6499,7 @@ size_t ath10k_wmi_fw_stats_num_vdevs(struct list_head *head);
 void ath10k_wmi_10_4_op_fw_stats_fill(struct ath10k *ar,
 				      struct ath10k_fw_stats *fw_stats,
 				      char *buf);
+int ath10k_wmi_op_get_vdev_subtype(struct ath10k *ar,
+				   enum wmi_vdev_subtype subtype);
 
 #endif /* _WMI_H_ */
-- 
cgit v1.2.3


From b1a958c933c5b0f967844ec05e76ec2985450782 Mon Sep 17 00:00:00 2001
From: Raja Mani <rmani@codeaurora.org>
Date: Fri, 29 Jan 2016 16:35:11 +0530
Subject: ath10k: add qca4019 hw params

Add a new entry in hw_params_list for qca4019 with list of
it's own details.

Signed-off-by: Raja Mani <rmani@qti.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/core.c      | 20 ++++++++++++++++++++
 drivers/net/wireless/ath/ath10k/hw.h        |  8 ++++++++
 drivers/net/wireless/ath/ath10k/targaddrs.h |  3 +++
 3 files changed, 31 insertions(+)

diff --git a/drivers/net/wireless/ath/ath10k/core.c b/drivers/net/wireless/ath/ath10k/core.c
index 1f4a27881936..79043872e7ac 100644
--- a/drivers/net/wireless/ath/ath10k/core.c
+++ b/drivers/net/wireless/ath/ath10k/core.c
@@ -201,6 +201,26 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 			.board_ext_size = QCA9377_BOARD_EXT_DATA_SZ,
 		},
 	},
+	{
+		.id = QCA4019_HW_1_0_DEV_VERSION,
+		.dev_id = 0,
+		.name = "qca4019 hw1.0",
+		.patch_load_addr = QCA4019_HW_1_0_PATCH_LOAD_ADDR,
+		.uart_pin = 7,
+		.otp_exe_param = 0x0010000,
+		.continuous_frag_desc = true,
+		.channel_counters_freq_hz = 125000,
+		.max_probe_resp_desc_thres = 24,
+		.hw_4addr_pad = ATH10K_HW_4ADDR_PAD_BEFORE,
+		.fw = {
+			.dir = QCA4019_HW_1_0_FW_DIR,
+			.fw = QCA4019_HW_1_0_FW_FILE,
+			.otp = QCA4019_HW_1_0_OTP_FILE,
+			.board = QCA4019_HW_1_0_BOARD_DATA_FILE,
+			.board_size = QCA4019_BOARD_DATA_SZ,
+			.board_ext_size = QCA4019_BOARD_EXT_DATA_SZ,
+		},
+	},
 };
 
 static const char *const ath10k_core_fw_feature_str[] = {
diff --git a/drivers/net/wireless/ath/ath10k/hw.h b/drivers/net/wireless/ath/ath10k/hw.h
index 4217bdbe9f01..291ca1f798e3 100644
--- a/drivers/net/wireless/ath/ath10k/hw.h
+++ b/drivers/net/wireless/ath/ath10k/hw.h
@@ -106,6 +106,14 @@ enum qca9377_chip_id_rev {
 #define QCA9377_HW_1_0_BOARD_DATA_FILE "board.bin"
 #define QCA9377_HW_1_0_PATCH_LOAD_ADDR	0x1234
 
+/* QCA4019 1.0 definitions */
+#define QCA4019_HW_1_0_DEV_VERSION     0x01000000
+#define QCA4019_HW_1_0_FW_DIR          ATH10K_FW_DIR "/QCA4019/hw1.0"
+#define QCA4019_HW_1_0_FW_FILE         "firmware.bin"
+#define QCA4019_HW_1_0_OTP_FILE        "otp.bin"
+#define QCA4019_HW_1_0_BOARD_DATA_FILE "board.bin"
+#define QCA4019_HW_1_0_PATCH_LOAD_ADDR  0x1234
+
 #define ATH10K_FW_API2_FILE		"firmware-2.bin"
 #define ATH10K_FW_API3_FILE		"firmware-3.bin"
 
diff --git a/drivers/net/wireless/ath/ath10k/targaddrs.h b/drivers/net/wireless/ath/ath10k/targaddrs.h
index 05a421bc322a..361f143b019c 100644
--- a/drivers/net/wireless/ath/ath10k/targaddrs.h
+++ b/drivers/net/wireless/ath/ath10k/targaddrs.h
@@ -456,4 +456,7 @@ Fw Mode/SubMode Mask
 #define QCA99X0_BOARD_DATA_SZ	  12288
 #define QCA99X0_BOARD_EXT_DATA_SZ 0
 
+#define QCA4019_BOARD_DATA_SZ	  12064
+#define QCA4019_BOARD_EXT_DATA_SZ 0
+
 #endif /* __TARGADDRS_H__ */
-- 
cgit v1.2.3


From 5699a6f238ebfc8a6be3963a30d86d6f1e8aaaf9 Mon Sep 17 00:00:00 2001
From: Raja Mani <rmani@qti.qualcomm.com>
Date: Fri, 29 Jan 2016 16:35:12 +0530
Subject: ath10k: populate qca4019 fw specific wmi init params

Some of the parameter like tx/rx chain mask, number of htt tx desc,
qcache active peer count, etc goes via wmi init cmd to qca4019 firmware
are different.

To make use of 10.4 gen_init function for qca4019, change wmi service
ready handler and 10.4 wmi init functions to adapt qca4019 specific
init values.

Signed-off-by: Raja Mani <rmani@qti.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/core.c | 14 ++++++++++++--
 drivers/net/wireless/ath/ath10k/core.h |  6 ++++++
 drivers/net/wireless/ath/ath10k/hw.h   |  6 ------
 drivers/net/wireless/ath/ath10k/wmi.c  | 12 ++++++------
 drivers/net/wireless/ath/ath10k/wmi.h  |  1 -
 5 files changed, 24 insertions(+), 15 deletions(-)

diff --git a/drivers/net/wireless/ath/ath10k/core.c b/drivers/net/wireless/ath/ath10k/core.c
index 79043872e7ac..4d3176492ae7 100644
--- a/drivers/net/wireless/ath/ath10k/core.c
+++ b/drivers/net/wireless/ath/ath10k/core.c
@@ -156,6 +156,11 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 		.channel_counters_freq_hz = 150000,
 		.max_probe_resp_desc_thres = 24,
 		.hw_4addr_pad = ATH10K_HW_4ADDR_PAD_BEFORE,
+		.num_msdu_desc = 1424,
+		.qcache_active_peers = 50,
+		.tx_chain_mask = 0xf,
+		.rx_chain_mask = 0xf,
+		.max_spatial_stream = 4,
 		.fw = {
 			.dir = QCA99X0_HW_2_0_FW_DIR,
 			.fw = QCA99X0_HW_2_0_FW_FILE,
@@ -212,6 +217,11 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 		.channel_counters_freq_hz = 125000,
 		.max_probe_resp_desc_thres = 24,
 		.hw_4addr_pad = ATH10K_HW_4ADDR_PAD_BEFORE,
+		.num_msdu_desc = 2500,
+		.qcache_active_peers = 35,
+		.tx_chain_mask = 0x3,
+		.rx_chain_mask = 0x3,
+		.max_spatial_stream = 2,
 		.fw = {
 			.dir = QCA4019_HW_1_0_FW_DIR,
 			.fw = QCA4019_HW_1_0_FW_FILE,
@@ -1523,9 +1533,9 @@ static int ath10k_core_init_firmware_features(struct ath10k *ar)
 		ar->num_active_peers = TARGET_10_4_ACTIVE_PEERS;
 		ar->max_num_vdevs = TARGET_10_4_NUM_VDEVS;
 		ar->num_tids = TARGET_10_4_TGT_NUM_TIDS;
-		ar->htt.max_num_pending_tx = TARGET_10_4_NUM_MSDU_DESC;
+		ar->htt.max_num_pending_tx = ar->hw_params.num_msdu_desc;
 		ar->fw_stats_req_mask = WMI_STAT_PEER;
-		ar->max_spatial_stream = WMI_10_4_MAX_SPATIAL_STREAM;
+		ar->max_spatial_stream = ar->hw_params.max_spatial_stream;
 		break;
 	case ATH10K_FW_WMI_OP_VERSION_UNSET:
 	case ATH10K_FW_WMI_OP_VERSION_MAX:
diff --git a/drivers/net/wireless/ath/ath10k/core.h b/drivers/net/wireless/ath/ath10k/core.h
index 2e411b5258c2..a62b62a62266 100644
--- a/drivers/net/wireless/ath/ath10k/core.h
+++ b/drivers/net/wireless/ath/ath10k/core.h
@@ -680,6 +680,12 @@ struct ath10k {
 		/* The padding bytes's location is different on various chips */
 		enum ath10k_hw_4addr_pad hw_4addr_pad;
 
+		u32 num_msdu_desc;
+		u32 qcache_active_peers;
+		u32 tx_chain_mask;
+		u32 rx_chain_mask;
+		u32 max_spatial_stream;
+
 		struct ath10k_hw_params_fw {
 			const char *dir;
 			const char *fw;
diff --git a/drivers/net/wireless/ath/ath10k/hw.h b/drivers/net/wireless/ath/ath10k/hw.h
index 291ca1f798e3..2dece8db83f8 100644
--- a/drivers/net/wireless/ath/ath10k/hw.h
+++ b/drivers/net/wireless/ath/ath10k/hw.h
@@ -426,16 +426,11 @@ enum ath10k_hw_4addr_pad {
 #define TARGET_10_4_ACTIVE_PEERS		0
 
 #define TARGET_10_4_NUM_QCACHE_PEERS_MAX	512
-#define TARGET_10_4_QCACHE_ACTIVE_PEERS		50
 #define TARGET_10_4_NUM_OFFLOAD_PEERS		0
 #define TARGET_10_4_NUM_OFFLOAD_REORDER_BUFFS	0
 #define TARGET_10_4_NUM_PEER_KEYS		2
 #define TARGET_10_4_TGT_NUM_TIDS		((TARGET_10_4_NUM_PEERS) * 2)
 #define TARGET_10_4_AST_SKID_LIMIT		32
-#define TARGET_10_4_TX_CHAIN_MASK		(BIT(0) | BIT(1) | \
-						 BIT(2) | BIT(3))
-#define TARGET_10_4_RX_CHAIN_MASK		(BIT(0) | BIT(1) | \
-						 BIT(2) | BIT(3))
 
 /* 100 ms for video, best-effort, and background */
 #define TARGET_10_4_RX_TIMEOUT_LO_PRI		100
@@ -461,7 +456,6 @@ enum ath10k_hw_4addr_pad {
 #define TARGET_10_4_RX_SKIP_DEFRAG_TIMEOUT_DUP_DETECTION_CHECK 1
 #define TARGET_10_4_VOW_CONFIG			0
 #define TARGET_10_4_GTK_OFFLOAD_MAX_VDEV	3
-#define TARGET_10_4_NUM_MSDU_DESC		(1024 + 400)
 #define TARGET_10_4_11AC_TX_MAX_FRAGS		2
 #define TARGET_10_4_MAX_PEER_EXT_STATS		16
 #define TARGET_10_4_SMART_ANT_CAP		0
diff --git a/drivers/net/wireless/ath/ath10k/wmi.c b/drivers/net/wireless/ath/ath10k/wmi.c
index 04799c73ebc8..1ce67423224a 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.c
+++ b/drivers/net/wireless/ath/ath10k/wmi.c
@@ -4618,9 +4618,9 @@ static void ath10k_wmi_event_service_ready_work(struct work_struct *work)
 
 	if (test_bit(WMI_SERVICE_PEER_CACHING, ar->wmi.svc_map)) {
 		ar->max_num_peers = TARGET_10_4_NUM_QCACHE_PEERS_MAX +
-				    TARGET_10_4_NUM_VDEVS;
-		ar->num_active_peers = TARGET_10_4_QCACHE_ACTIVE_PEERS +
-				       TARGET_10_4_NUM_VDEVS;
+				    ar->max_num_vdevs;
+		ar->num_active_peers = ar->hw_params.qcache_active_peers +
+				       ar->max_num_vdevs;
 		ar->num_tids = ar->num_active_peers * 2;
 		ar->max_num_stations = TARGET_10_4_NUM_QCACHE_PEERS_MAX;
 	}
@@ -5602,8 +5602,8 @@ static struct sk_buff *ath10k_wmi_10_4_op_gen_init(struct ath10k *ar)
 			__cpu_to_le32(TARGET_10_4_NUM_OFFLOAD_REORDER_BUFFS);
 	config.num_peer_keys  = __cpu_to_le32(TARGET_10_4_NUM_PEER_KEYS);
 	config.ast_skid_limit = __cpu_to_le32(TARGET_10_4_AST_SKID_LIMIT);
-	config.tx_chain_mask  = __cpu_to_le32(TARGET_10_4_TX_CHAIN_MASK);
-	config.rx_chain_mask  = __cpu_to_le32(TARGET_10_4_RX_CHAIN_MASK);
+	config.tx_chain_mask  = __cpu_to_le32(ar->hw_params.tx_chain_mask);
+	config.rx_chain_mask  = __cpu_to_le32(ar->hw_params.rx_chain_mask);
 
 	config.rx_timeout_pri[0] = __cpu_to_le32(TARGET_10_4_RX_TIMEOUT_LO_PRI);
 	config.rx_timeout_pri[1] = __cpu_to_le32(TARGET_10_4_RX_TIMEOUT_LO_PRI);
@@ -5634,7 +5634,7 @@ static struct sk_buff *ath10k_wmi_10_4_op_gen_init(struct ath10k *ar)
 	config.vow_config = __cpu_to_le32(TARGET_10_4_VOW_CONFIG);
 	config.gtk_offload_max_vdev =
 			__cpu_to_le32(TARGET_10_4_GTK_OFFLOAD_MAX_VDEV);
-	config.num_msdu_desc = __cpu_to_le32(TARGET_10_4_NUM_MSDU_DESC);
+	config.num_msdu_desc = __cpu_to_le32(ar->htt.max_num_pending_tx);
 	config.max_frag_entries = __cpu_to_le32(TARGET_10_4_11AC_TX_MAX_FRAGS);
 	config.max_peer_ext_stats =
 			__cpu_to_le32(TARGET_10_4_MAX_PEER_EXT_STATS);
diff --git a/drivers/net/wireless/ath/ath10k/wmi.h b/drivers/net/wireless/ath/ath10k/wmi.h
index 049c61820765..4d3cbc44fcd2 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.h
+++ b/drivers/net/wireless/ath/ath10k/wmi.h
@@ -1818,7 +1818,6 @@ enum wmi_channel_change_cause {
 #define WMI_CHANNEL_CHANGE_CAUSE_CSA (1 << 13)
 
 #define WMI_MAX_SPATIAL_STREAM        3 /* default max ss */
-#define WMI_10_4_MAX_SPATIAL_STREAM   4
 
 /* HT Capabilities*/
 #define WMI_HT_CAP_ENABLED                0x0001   /* HT Enabled/ disabled */
-- 
cgit v1.2.3


From 4fb37186f3b2b1f5d1a8f3e6b26b719bf2df6ee3 Mon Sep 17 00:00:00 2001
From: Sudip Mukherjee <sudip@vectorindia.org>
Date: Tue, 2 Feb 2016 12:44:40 +0530
Subject: ath10k: remove impossible code

len has been initialized with a value of 0 and buf_len with 4096. There
is no way that this condition (len > buf_len) can be true now.

Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/debug.c | 3 ---
 1 file changed, 3 deletions(-)

diff --git a/drivers/net/wireless/ath/ath10k/debug.c b/drivers/net/wireless/ath/ath10k/debug.c
index 8d4148a96af8..3dd75a2daf08 100644
--- a/drivers/net/wireless/ath/ath10k/debug.c
+++ b/drivers/net/wireless/ath/ath10k/debug.c
@@ -2182,9 +2182,6 @@ static ssize_t ath10k_debug_fw_checksums_read(struct file *file,
 
 	mutex_lock(&ar->conf_mutex);
 
-	if (len > buf_len)
-		len = buf_len;
-
 	len += scnprintf(buf + len, buf_len - len,
 			 "firmware-N.bin\t\t%08x\n",
 			 crc32_le(0, ar->firmware->data, ar->firmware->size));
-- 
cgit v1.2.3


From 74135f599f9a2d0c54674640aa7d2423ab8ca98c Mon Sep 17 00:00:00 2001
From: Mohammed Shafi Shajakhan <mohammed@qti.qualcomm.com>
Date: Wed, 3 Feb 2016 21:07:42 +0530
Subject: ath10k: fix updating peer stats rx duration

We are not updating peer stats rx_duration periodically
unless the user one polls for fw_stats, this is because
we discard the update event since pdev list is empty. Fix
this by updating rx duration periodically irrepective of checks
for pdev list (irrespective of ping-pong response)

Fixes: 856e7c3 ("ath10k: add debugfs support for Per STA total rx duration")
Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qti.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/debug.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/net/wireless/ath/ath10k/debug.c b/drivers/net/wireless/ath/ath10k/debug.c
index 3dd75a2daf08..848a0ddca722 100644
--- a/drivers/net/wireless/ath/ath10k/debug.c
+++ b/drivers/net/wireless/ath/ath10k/debug.c
@@ -348,6 +348,9 @@ void ath10k_debug_fw_stats_process(struct ath10k *ar, struct sk_buff *skb)
 	 */
 
 	peer_stats_svc = test_bit(WMI_SERVICE_PEER_STATS, ar->wmi.svc_map);
+	if (peer_stats_svc)
+		ath10k_sta_update_rx_duration(ar, &stats.peers);
+
 	if (ar->debug.fw_stats_done && !peer_stats_svc) {
 		ath10k_warn(ar, "received unsolicited stats update event\n");
 		goto free;
@@ -384,9 +387,6 @@ void ath10k_debug_fw_stats_process(struct ath10k *ar, struct sk_buff *skb)
 			goto free;
 		}
 
-		if (peer_stats_svc)
-			ath10k_sta_update_rx_duration(ar, &stats.peers);
-
 		list_splice_tail_init(&stats.peers, &ar->debug.fw_stats.peers);
 		list_splice_tail_init(&stats.vdevs, &ar->debug.fw_stats.vdevs);
 	}
-- 
cgit v1.2.3


From e0b6ce00b1ec0434e96629ab64f3e16dcb4f33b7 Mon Sep 17 00:00:00 2001
From: Mohammed Shafi Shajakhan <mohammed@qti.qualcomm.com>
Date: Wed, 3 Feb 2016 21:07:43 +0530
Subject: ath10k: fix pointless update of peer stats list

We periodically receive f/w stats event for updating
the rx duration and there is no reason to keep on appending
the f/w stats peer list, as this gets completely cleaned up when
the user polls for f/w stats {pdev, vdev, peer stats}. Only don't
print the warning message in the case PEER_STATS service is enabled

Fixes: 856e7c3 ("ath10k: add debugfs support for Per STA total rx duration")
Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qti.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/debug.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/ath/ath10k/debug.c b/drivers/net/wireless/ath/ath10k/debug.c
index 848a0ddca722..a633152787e0 100644
--- a/drivers/net/wireless/ath/ath10k/debug.c
+++ b/drivers/net/wireless/ath/ath10k/debug.c
@@ -351,8 +351,10 @@ void ath10k_debug_fw_stats_process(struct ath10k *ar, struct sk_buff *skb)
 	if (peer_stats_svc)
 		ath10k_sta_update_rx_duration(ar, &stats.peers);
 
-	if (ar->debug.fw_stats_done && !peer_stats_svc) {
-		ath10k_warn(ar, "received unsolicited stats update event\n");
+	if (ar->debug.fw_stats_done) {
+		if (!peer_stats_svc)
+			ath10k_warn(ar, "received unsolicited stats update event\n");
+
 		goto free;
 	}
 
-- 
cgit v1.2.3


From 53a5c9bc53ce51f65699a43c67ab167436d28083 Mon Sep 17 00:00:00 2001
From: Ashok Raj Nagarajan <arnagara@qti.qualcomm.com>
Date: Fri, 5 Feb 2016 21:12:48 +0530
Subject: ath10k: fix pktlog in QCA99X0

Currently, we are providing wrong payload data of pktlog to trace points.
Data we receive from FW through copy engine 8 contains pktlog data alone.
We don't need to parse anything in driver before handing it to trace
points.

Fixes: afb0bf7f530b ("ath10k: add support for pktlog in QCA99X0")
Signed-off-by: Ashok Raj Nagarajan <arnagara@qti.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/htt_rx.c | 6 +-----
 1 file changed, 1 insertion(+), 5 deletions(-)

diff --git a/drivers/net/wireless/ath/ath10k/htt_rx.c b/drivers/net/wireless/ath/ath10k/htt_rx.c
index cc957a625605..bf778f291133 100644
--- a/drivers/net/wireless/ath/ath10k/htt_rx.c
+++ b/drivers/net/wireless/ath/ath10k/htt_rx.c
@@ -2145,11 +2145,7 @@ EXPORT_SYMBOL(ath10k_htt_t2h_msg_handler);
 void ath10k_htt_rx_pktlog_completion_handler(struct ath10k *ar,
 					     struct sk_buff *skb)
 {
-	struct ath10k_pktlog_10_4_hdr *hdr =
-		(struct ath10k_pktlog_10_4_hdr *)skb->data;
-
-	trace_ath10k_htt_pktlog(ar, hdr->payload,
-				sizeof(*hdr) + __le16_to_cpu(hdr->size));
+	trace_ath10k_htt_pktlog(ar, skb->data, skb->len);
 	dev_kfree_skb_any(skb);
 }
 EXPORT_SYMBOL(ath10k_htt_rx_pktlog_completion_handler);
-- 
cgit v1.2.3


From 18353749170033405790ed62a3ae2aa2d3d8a82a Mon Sep 17 00:00:00 2001
From: Ashok Raj Nagarajan <arnagara@qti.qualcomm.com>
Date: Fri, 5 Feb 2016 21:12:49 +0530
Subject: ath10k: add hw_rev to trace events to support pktlog

pktlog data is different between firmware variants (eg. 10.2 vs 10.4). To
have a unified user space script to decode pktlog trace events generated,
it is desirable to know which firmware variant has provided the events and
thereby decode the pktlogs appropriately. Hardware revision (hw_rev) helps
to determine the firmware variant sending these trace events. So add hw_rev
to trace events.

Signed-off-by: Ashok Raj Nagarajan <arnagara@qti.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/trace.h | 15 ++++++++++++---
 1 file changed, 12 insertions(+), 3 deletions(-)

diff --git a/drivers/net/wireless/ath/ath10k/trace.h b/drivers/net/wireless/ath/ath10k/trace.h
index 71bdb368813d..e0d00cef0bd8 100644
--- a/drivers/net/wireless/ath/ath10k/trace.h
+++ b/drivers/net/wireless/ath/ath10k/trace.h
@@ -250,6 +250,7 @@ TRACE_EVENT(ath10k_wmi_dbglog,
 	TP_STRUCT__entry(
 		__string(device, dev_name(ar->dev))
 		__string(driver, dev_driver_string(ar->dev))
+		__field(u8, hw_type);
 		__field(size_t, buf_len)
 		__dynamic_array(u8, buf, buf_len)
 	),
@@ -257,14 +258,16 @@ TRACE_EVENT(ath10k_wmi_dbglog,
 	TP_fast_assign(
 		__assign_str(device, dev_name(ar->dev));
 		__assign_str(driver, dev_driver_string(ar->dev));
+		__entry->hw_type = ar->hw_rev;
 		__entry->buf_len = buf_len;
 		memcpy(__get_dynamic_array(buf), buf, buf_len);
 	),
 
 	TP_printk(
-		"%s %s len %zu",
+		"%s %s %d len %zu",
 		__get_str(driver),
 		__get_str(device),
+		__entry->hw_type,
 		__entry->buf_len
 	)
 );
@@ -277,6 +280,7 @@ TRACE_EVENT(ath10k_htt_pktlog,
 	TP_STRUCT__entry(
 		__string(device, dev_name(ar->dev))
 		__string(driver, dev_driver_string(ar->dev))
+		__field(u8, hw_type);
 		__field(u16, buf_len)
 		__dynamic_array(u8, pktlog, buf_len)
 	),
@@ -284,14 +288,16 @@ TRACE_EVENT(ath10k_htt_pktlog,
 	TP_fast_assign(
 		__assign_str(device, dev_name(ar->dev));
 		__assign_str(driver, dev_driver_string(ar->dev));
+		__entry->hw_type = ar->hw_rev;
 		__entry->buf_len = buf_len;
 		memcpy(__get_dynamic_array(pktlog), buf, buf_len);
 	),
 
 	TP_printk(
-		"%s %s size %hu",
+		"%s %s %d size %hu",
 		__get_str(driver),
 		__get_str(device),
+		__entry->hw_type,
 		__entry->buf_len
 	 )
 );
@@ -440,6 +446,7 @@ TRACE_EVENT(ath10k_htt_rx_desc,
 	TP_STRUCT__entry(
 		__string(device, dev_name(ar->dev))
 		__string(driver, dev_driver_string(ar->dev))
+		__field(u8, hw_type);
 		__field(u16, len)
 		__dynamic_array(u8, rxdesc, len)
 	),
@@ -447,14 +454,16 @@ TRACE_EVENT(ath10k_htt_rx_desc,
 	TP_fast_assign(
 		__assign_str(device, dev_name(ar->dev));
 		__assign_str(driver, dev_driver_string(ar->dev));
+		__entry->hw_type = ar->hw_rev;
 		__entry->len = len;
 		memcpy(__get_dynamic_array(rxdesc), data, len);
 	),
 
 	TP_printk(
-		"%s %s rxdesc len %d",
+		"%s %s %d rxdesc len %d",
 		__get_str(driver),
 		__get_str(device),
+		__entry->hw_type,
 		__entry->len
 	 )
 );
-- 
cgit v1.2.3


From 22baa98097df3eb92a51e8661fda5dd7c0f1eb93 Mon Sep 17 00:00:00 2001
From: Anton Protopopov <a.s.protopopov@gmail.com>
Date: Wed, 10 Feb 2016 11:58:55 -0500
Subject: ath10k: fix erroneous return value

The ath10k_pci_hif_exchange_bmi_msg() function may return the positive
value EIO instead of -EIO in case of error.

Signed-off-by: Anton Protopopov <a.s.protopopov@gmail.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/pci.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/ath/ath10k/pci.c b/drivers/net/wireless/ath/ath10k/pci.c
index 0e338b657210..b3cff1d3364a 100644
--- a/drivers/net/wireless/ath/ath10k/pci.c
+++ b/drivers/net/wireless/ath/ath10k/pci.c
@@ -1772,7 +1772,7 @@ int ath10k_pci_hif_exchange_bmi_msg(struct ath10k *ar,
 					    DMA_FROM_DEVICE);
 		ret = dma_mapping_error(ar->dev, resp_paddr);
 		if (ret) {
-			ret = EIO;
+			ret = -EIO;
 			goto err_req;
 		}
 
-- 
cgit v1.2.3


From e7827e512af01c6220e2f1cc53853f11cd742eef Mon Sep 17 00:00:00 2001
From: Rajkumar Manoharan <rmanohar@qti.qualcomm.com>
Date: Fri, 12 Feb 2016 11:40:58 +0530
Subject: ath10k: reduce rx_lock contention for htt rx indication

Received frame indications are queued into a skb list and latest
processed by txrx tasklet. This skb queue is protected by htt rx lock.
Since the entire rx processing till delivering frame to mac80211 and
replenish tasks are processed under rx_lock protection, there might be
some delay in queuing newly received rx frame into that list on
multicore systems. Optimize this by using skb list lock while accessing
rx completion queue instead of htt rx lock.

Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/htt_rx.c | 18 ++++++++----------
 1 file changed, 8 insertions(+), 10 deletions(-)

diff --git a/drivers/net/wireless/ath/ath10k/htt_rx.c b/drivers/net/wireless/ath/ath10k/htt_rx.c
index bf778f291133..a31de7b82da2 100644
--- a/drivers/net/wireless/ath/ath10k/htt_rx.c
+++ b/drivers/net/wireless/ath/ath10k/htt_rx.c
@@ -2011,9 +2011,7 @@ void ath10k_htt_t2h_msg_handler(struct ath10k *ar, struct sk_buff *skb)
 		break;
 	}
 	case HTT_T2H_MSG_TYPE_RX_IND:
-		spin_lock_bh(&htt->rx_ring.lock);
-		__skb_queue_tail(&htt->rx_compl_q, skb);
-		spin_unlock_bh(&htt->rx_ring.lock);
+		skb_queue_tail(&htt->rx_compl_q, skb);
 		tasklet_schedule(&htt->txrx_compl_task);
 		return;
 	case HTT_T2H_MSG_TYPE_PEER_MAP: {
@@ -2111,9 +2109,7 @@ void ath10k_htt_t2h_msg_handler(struct ath10k *ar, struct sk_buff *skb)
 		break;
 	}
 	case HTT_T2H_MSG_TYPE_RX_IN_ORD_PADDR_IND: {
-		spin_lock_bh(&htt->rx_ring.lock);
-		__skb_queue_tail(&htt->rx_in_ord_compl_q, skb);
-		spin_unlock_bh(&htt->rx_ring.lock);
+		skb_queue_tail(&htt->rx_in_ord_compl_q, skb);
 		tasklet_schedule(&htt->txrx_compl_task);
 		return;
 	}
@@ -2170,16 +2166,18 @@ static void ath10k_htt_txrx_compl_task(unsigned long ptr)
 		dev_kfree_skb_any(skb);
 	}
 
-	spin_lock_bh(&htt->rx_ring.lock);
-	while ((skb = __skb_dequeue(&htt->rx_compl_q))) {
+	while ((skb = skb_dequeue(&htt->rx_compl_q))) {
 		resp = (struct htt_resp *)skb->data;
+		spin_lock_bh(&htt->rx_ring.lock);
 		ath10k_htt_rx_handler(htt, &resp->rx_ind);
+		spin_unlock_bh(&htt->rx_ring.lock);
 		dev_kfree_skb_any(skb);
 	}
 
-	while ((skb = __skb_dequeue(&htt->rx_in_ord_compl_q))) {
+	while ((skb = skb_dequeue(&htt->rx_in_ord_compl_q))) {
+		spin_lock_bh(&htt->rx_ring.lock);
 		ath10k_htt_rx_in_ord_ind(ar, skb);
+		spin_unlock_bh(&htt->rx_ring.lock);
 		dev_kfree_skb_any(skb);
 	}
-	spin_unlock_bh(&htt->rx_ring.lock);
 }
-- 
cgit v1.2.3


From da6416cac6b9439167964cae1302d9cfe764bf1d Mon Sep 17 00:00:00 2001
From: Rajkumar Manoharan <rmanohar@qti.qualcomm.com>
Date: Fri, 12 Feb 2016 11:40:59 +0530
Subject: ath10k: process htt rx indication as batch mode

On multicore systems, it is possible that txrx tasket can run
in parallel with pci tasklet (i.e smp affinity of ath10k irq is
assigned to multiple CPUs). Feeding and consuming from the same
rx completion list leads to txrx tasklet runs for longer period.
Prevent this by processing a snapshot of rx queue by moving list
into temporary list. Consecutive received frames will be processed
in next batch.

Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/htt_rx.c | 16 ++++++++++++++--
 1 file changed, 14 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/ath/ath10k/htt_rx.c b/drivers/net/wireless/ath/ath10k/htt_rx.c
index a31de7b82da2..ae9b686a4e91 100644
--- a/drivers/net/wireless/ath/ath10k/htt_rx.c
+++ b/drivers/net/wireless/ath/ath10k/htt_rx.c
@@ -2151,22 +2151,34 @@ static void ath10k_htt_txrx_compl_task(unsigned long ptr)
 	struct ath10k_htt *htt = (struct ath10k_htt *)ptr;
 	struct ath10k *ar = htt->ar;
 	struct sk_buff_head tx_q;
+	struct sk_buff_head rx_q;
+	struct sk_buff_head rx_ind_q;
 	struct htt_resp *resp;
 	struct sk_buff *skb;
 	unsigned long flags;
 
 	__skb_queue_head_init(&tx_q);
+	__skb_queue_head_init(&rx_q);
+	__skb_queue_head_init(&rx_ind_q);
 
 	spin_lock_irqsave(&htt->tx_compl_q.lock, flags);
 	skb_queue_splice_init(&htt->tx_compl_q, &tx_q);
 	spin_unlock_irqrestore(&htt->tx_compl_q.lock, flags);
 
+	spin_lock_irqsave(&htt->rx_compl_q.lock, flags);
+	skb_queue_splice_init(&htt->rx_compl_q, &rx_q);
+	spin_unlock_irqrestore(&htt->rx_compl_q.lock, flags);
+
+	spin_lock_irqsave(&htt->rx_in_ord_compl_q.lock, flags);
+	skb_queue_splice_init(&htt->rx_in_ord_compl_q, &rx_ind_q);
+	spin_unlock_irqrestore(&htt->rx_in_ord_compl_q.lock, flags);
+
 	while ((skb = __skb_dequeue(&tx_q))) {
 		ath10k_htt_rx_frm_tx_compl(htt->ar, skb);
 		dev_kfree_skb_any(skb);
 	}
 
-	while ((skb = skb_dequeue(&htt->rx_compl_q))) {
+	while ((skb = __skb_dequeue(&rx_q))) {
 		resp = (struct htt_resp *)skb->data;
 		spin_lock_bh(&htt->rx_ring.lock);
 		ath10k_htt_rx_handler(htt, &resp->rx_ind);
@@ -2174,7 +2186,7 @@ static void ath10k_htt_txrx_compl_task(unsigned long ptr)
 		dev_kfree_skb_any(skb);
 	}
 
-	while ((skb = skb_dequeue(&htt->rx_in_ord_compl_q))) {
+	while ((skb = __skb_dequeue(&rx_ind_q))) {
 		spin_lock_bh(&htt->rx_ring.lock);
 		ath10k_htt_rx_in_ord_ind(ar, skb);
 		spin_unlock_bh(&htt->rx_ring.lock);
-- 
cgit v1.2.3


From af9a6a3ad04cb042fe1b723335c411c1ab9b7959 Mon Sep 17 00:00:00 2001
From: Anilkumar Kolli <akolli@qti.qualcomm.com>
Date: Tue, 23 Feb 2016 12:19:57 +0530
Subject: ath10k: reduce number of peers to support peer stats feature

To enable per peer stats feature we are reducing the number of peers.
Firmware has introduced tx stats feature. We have memory limitation in
firmware to add these additional bytes.

These are the new variables introduced in the firmware.
========		=======================
Variable	      	Bytes required/per rate
========		=======================
TX success packets 	1
TX failed packets	1
Retry packets		1
Success bytes		2
TX failed bytes		2
Retry bytes		2
Tx duration		4
Rate			1
Bw and AMPDU flags	1
Total			16 (because of allocation in word pattern)

Firmware sends these tx_stats in pktlog.
If we consider 4 feedbacks at a time, Frimware need about ~1K memory for coding
and 8192 bytes required / per rate [ 4*16*128(peers)].
To accommodate this firmware needs to reduce 10 peers.

This fixes a firmware crash with firmware-5.bin_10.2.4.70.22-2.

Signed-off-by: Anilkumar Kolli <akolli@qti.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/core.c |  9 +++++++--
 drivers/net/wireless/ath/ath10k/hw.h   |  5 +++++
 drivers/net/wireless/ath/ath10k/wmi.c  | 10 ++++++++--
 3 files changed, 20 insertions(+), 4 deletions(-)

diff --git a/drivers/net/wireless/ath/ath10k/core.c b/drivers/net/wireless/ath/ath10k/core.c
index 4d3176492ae7..c84c2d30ef1f 100644
--- a/drivers/net/wireless/ath/ath10k/core.c
+++ b/drivers/net/wireless/ath/ath10k/core.c
@@ -1509,8 +1509,13 @@ static int ath10k_core_init_firmware_features(struct ath10k *ar)
 	case ATH10K_FW_WMI_OP_VERSION_10_1:
 	case ATH10K_FW_WMI_OP_VERSION_10_2:
 	case ATH10K_FW_WMI_OP_VERSION_10_2_4:
-		ar->max_num_peers = TARGET_10X_NUM_PEERS;
-		ar->max_num_stations = TARGET_10X_NUM_STATIONS;
+		if (test_bit(WMI_SERVICE_PEER_STATS, ar->wmi.svc_map)) {
+			ar->max_num_peers = TARGET_10X_TX_STATS_NUM_PEERS;
+			ar->max_num_stations = TARGET_10X_TX_STATS_NUM_STATIONS;
+		} else {
+			ar->max_num_peers = TARGET_10X_NUM_PEERS;
+			ar->max_num_stations = TARGET_10X_NUM_STATIONS;
+		}
 		ar->max_num_vdevs = TARGET_10X_NUM_VDEVS;
 		ar->htt.max_num_pending_tx = TARGET_10X_NUM_MSDU_DESC;
 		ar->fw_stats_req_mask = WMI_STAT_PEER;
diff --git a/drivers/net/wireless/ath/ath10k/hw.h b/drivers/net/wireless/ath/ath10k/hw.h
index 2dece8db83f8..f0cfbc745c97 100644
--- a/drivers/net/wireless/ath/ath10k/hw.h
+++ b/drivers/net/wireless/ath/ath10k/hw.h
@@ -375,14 +375,19 @@ enum ath10k_hw_4addr_pad {
 #define TARGET_10X_MAC_AGGR_DELIM		0
 #define TARGET_10X_AST_SKID_LIMIT		128
 #define TARGET_10X_NUM_STATIONS			128
+#define TARGET_10X_TX_STATS_NUM_STATIONS	118
 #define TARGET_10X_NUM_PEERS			((TARGET_10X_NUM_STATIONS) + \
 						 (TARGET_10X_NUM_VDEVS))
+#define TARGET_10X_TX_STATS_NUM_PEERS		((TARGET_10X_TX_STATS_NUM_STATIONS) + \
+						 (TARGET_10X_NUM_VDEVS))
 #define TARGET_10X_NUM_OFFLOAD_PEERS		0
 #define TARGET_10X_NUM_OFFLOAD_REORDER_BUFS	0
 #define TARGET_10X_NUM_PEER_KEYS		2
 #define TARGET_10X_NUM_TIDS_MAX			256
 #define TARGET_10X_NUM_TIDS			min((TARGET_10X_NUM_TIDS_MAX), \
 						    (TARGET_10X_NUM_PEERS) * 2)
+#define TARGET_10X_TX_STATS_NUM_TIDS		min((TARGET_10X_NUM_TIDS_MAX), \
+						    (TARGET_10X_TX_STATS_NUM_PEERS) * 2)
 #define TARGET_10X_TX_CHAIN_MASK		(BIT(0) | BIT(1) | BIT(2))
 #define TARGET_10X_RX_CHAIN_MASK		(BIT(0) | BIT(1) | BIT(2))
 #define TARGET_10X_RX_TIMEOUT_LO_PRI		100
diff --git a/drivers/net/wireless/ath/ath10k/wmi.c b/drivers/net/wireless/ath/ath10k/wmi.c
index 1ce67423224a..70261387d1a5 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.c
+++ b/drivers/net/wireless/ath/ath10k/wmi.c
@@ -5516,9 +5516,15 @@ static struct sk_buff *ath10k_wmi_10_2_op_gen_init(struct ath10k *ar)
 	u32 len, val, features;
 
 	config.num_vdevs = __cpu_to_le32(TARGET_10X_NUM_VDEVS);
-	config.num_peers = __cpu_to_le32(TARGET_10X_NUM_PEERS);
 	config.num_peer_keys = __cpu_to_le32(TARGET_10X_NUM_PEER_KEYS);
-	config.num_tids = __cpu_to_le32(TARGET_10X_NUM_TIDS);
+	if (test_bit(WMI_SERVICE_PEER_STATS, ar->wmi.svc_map)) {
+		config.num_peers = __cpu_to_le32(TARGET_10X_TX_STATS_NUM_PEERS);
+		config.num_tids = __cpu_to_le32(TARGET_10X_TX_STATS_NUM_TIDS);
+	} else {
+		config.num_peers = __cpu_to_le32(TARGET_10X_NUM_PEERS);
+		config.num_tids = __cpu_to_le32(TARGET_10X_NUM_TIDS);
+	}
+
 	config.ast_skid_limit = __cpu_to_le32(TARGET_10X_AST_SKID_LIMIT);
 	config.tx_chain_mask = __cpu_to_le32(TARGET_10X_TX_CHAIN_MASK);
 	config.rx_chain_mask = __cpu_to_le32(TARGET_10X_RX_CHAIN_MASK);
-- 
cgit v1.2.3


From c28e6f06ff401ce8f37d58ff6d8123664cd65a51 Mon Sep 17 00:00:00 2001
From: Mohammed Shafi Shajakhan <mohammed@qti.qualcomm.com>
Date: Tue, 23 Feb 2016 12:58:36 +0530
Subject: ath10k: fix sanity check on enabling btcoex via debugfs

First check for the device state before enabling / disabling
btcoex, also return a proper error value. Enabling / disabling
btcoex ideally does a f/w + ath10k_core_restart so the checks
that are applicable for 'simulate_fw_crash' shall be applicable
for this as well

Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qti.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/debug.c | 13 +++++++++----
 1 file changed, 9 insertions(+), 4 deletions(-)

diff --git a/drivers/net/wireless/ath/ath10k/debug.c b/drivers/net/wireless/ath/ath10k/debug.c
index a633152787e0..076d29b53ddf 100644
--- a/drivers/net/wireless/ath/ath10k/debug.c
+++ b/drivers/net/wireless/ath/ath10k/debug.c
@@ -2114,6 +2114,7 @@ static ssize_t ath10k_write_btcoex(struct file *file,
 	struct ath10k *ar = file->private_data;
 	char buf[32];
 	size_t buf_size;
+	int ret = 0;
 	bool val;
 
 	buf_size = min(count, (sizeof(buf) - 1));
@@ -2127,6 +2128,12 @@ static ssize_t ath10k_write_btcoex(struct file *file,
 
 	mutex_lock(&ar->conf_mutex);
 
+	if (ar->state != ATH10K_STATE_ON &&
+	    ar->state != ATH10K_STATE_RESTARTED) {
+		ret = -ENETDOWN;
+		goto exit;
+	}
+
 	if (!(test_bit(ATH10K_FLAG_BTCOEX, &ar->dev_flags) ^ val))
 		goto exit;
 
@@ -2135,17 +2142,15 @@ static ssize_t ath10k_write_btcoex(struct file *file,
 	else
 		clear_bit(ATH10K_FLAG_BTCOEX, &ar->dev_flags);
 
-	if (ar->state != ATH10K_STATE_ON)
-		goto exit;
-
 	ath10k_info(ar, "restarting firmware due to btcoex change");
 
 	queue_work(ar->workqueue, &ar->restart_work);
+	ret = count;
 
 exit:
 	mutex_unlock(&ar->conf_mutex);
 
-	return count;
+	return ret;
 }
 
 static ssize_t ath10k_read_btcoex(struct file *file, char __user *ubuf,
-- 
cgit v1.2.3


From 82def495d118c6d36300c1cf2448c276273be603 Mon Sep 17 00:00:00 2001
From: Miaoqing Pan <miaoqing@codeaurora.org>
Date: Fri, 5 Feb 2016 09:45:50 +0800
Subject: ath9k: make NF load complete quickly and reliably

Make NF load complete quickly and reliably. NF load execution
is delayed by HW to end of frame if frame Rx or Tx is ongoing.
Increasing timeout to max frame duration. If NF cal is ongoing
before NF load, stop it before load, and restart it afterwards.

Signed-off-by: Miaoqing Pan <miaoqing@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath9k/calib.c | 38 ++++++++++++++++++++++++++++------
 1 file changed, 32 insertions(+), 6 deletions(-)

diff --git a/drivers/net/wireless/ath/ath9k/calib.c b/drivers/net/wireless/ath/ath9k/calib.c
index 3e2e24e4843f..37f6d66d1671 100644
--- a/drivers/net/wireless/ath/ath9k/calib.c
+++ b/drivers/net/wireless/ath/ath9k/calib.c
@@ -241,6 +241,7 @@ int ath9k_hw_loadnf(struct ath_hw *ah, struct ath9k_channel *chan)
 	u8 chainmask = (ah->rxchainmask << 3) | ah->rxchainmask;
 	struct ath_common *common = ath9k_hw_common(ah);
 	s16 default_nf = ath9k_hw_get_default_nf(ah, chan);
+	u32 bb_agc_ctl = REG_READ(ah, AR_PHY_AGC_CONTROL);
 
 	if (ah->caldata)
 		h = ah->caldata->nfCalHist;
@@ -263,6 +264,16 @@ int ath9k_hw_loadnf(struct ath_hw *ah, struct ath9k_channel *chan)
 		}
 	}
 
+	/*
+	 * stop NF cal if ongoing to ensure NF load completes immediately
+	 * (or after end rx/tx frame if ongoing)
+	 */
+	if (bb_agc_ctl & AR_PHY_AGC_CONTROL_NF) {
+		REG_CLR_BIT(ah, AR_PHY_AGC_CONTROL, AR_PHY_AGC_CONTROL_NF);
+		REG_RMW_BUFFER_FLUSH(ah);
+		ENABLE_REG_RMW_BUFFER(ah);
+	}
+
 	/*
 	 * Load software filtered NF value into baseband internal minCCApwr
 	 * variable.
@@ -276,17 +287,32 @@ int ath9k_hw_loadnf(struct ath_hw *ah, struct ath9k_channel *chan)
 
 	/*
 	 * Wait for load to complete, should be fast, a few 10s of us.
-	 * The max delay was changed from an original 250us to 10000us
-	 * since 250us often results in NF load timeout and causes deaf
-	 * condition during stress testing 12/12/2009
+	 * The max delay was changed from an original 250us to 22.2 msec.
+	 * This would increase timeout to the longest possible frame
+	 * (11n max length 22.1 msec)
 	 */
-	for (j = 0; j < 10000; j++) {
+	for (j = 0; j < 22200; j++) {
 		if ((REG_READ(ah, AR_PHY_AGC_CONTROL) &
-		     AR_PHY_AGC_CONTROL_NF) == 0)
+			      AR_PHY_AGC_CONTROL_NF) == 0)
 			break;
 		udelay(10);
 	}
 
+	/*
+	 * Restart NF so it can continue.
+	 */
+	if (bb_agc_ctl & AR_PHY_AGC_CONTROL_NF) {
+		ENABLE_REG_RMW_BUFFER(ah);
+		if (bb_agc_ctl & AR_PHY_AGC_CONTROL_ENABLE_NF)
+			REG_SET_BIT(ah, AR_PHY_AGC_CONTROL,
+				    AR_PHY_AGC_CONTROL_ENABLE_NF);
+		if (bb_agc_ctl & AR_PHY_AGC_CONTROL_NO_UPDATE_NF)
+			REG_SET_BIT(ah, AR_PHY_AGC_CONTROL,
+				    AR_PHY_AGC_CONTROL_NO_UPDATE_NF);
+		REG_SET_BIT(ah, AR_PHY_AGC_CONTROL, AR_PHY_AGC_CONTROL_NF);
+		REG_RMW_BUFFER_FLUSH(ah);
+	}
+
 	/*
 	 * We timed out waiting for the noisefloor to load, probably due to an
 	 * in-progress rx. Simply return here and allow the load plenty of time
@@ -296,7 +322,7 @@ int ath9k_hw_loadnf(struct ath_hw *ah, struct ath9k_channel *chan)
 	 * here, the baseband nf cal will just be capped by our present
 	 * noisefloor until the next calibration timer.
 	 */
-	if (j == 10000) {
+	if (j == 22200) {
 		ath_dbg(common, ANY,
 			"Timeout while waiting for nf to load: AR_PHY_AGC_CONTROL=0x%x\n",
 			REG_READ(ah, AR_PHY_AGC_CONTROL));
-- 
cgit v1.2.3


From e9a26010f607621597f25e55d94faf85a2d0d5a4 Mon Sep 17 00:00:00 2001
From: Arnd Bergmann <arnd@arndb.de>
Date: Fri, 12 Feb 2016 12:55:21 +0100
Subject: ath9k: reduce stack usage in ar9003_aic_cal_post_process

In some configurations, this function uses more than the warning limit
of 1024 bytes:

drivers/net/wireless/ath/ath9k/ar9003_aic.c: In function 'ar9003_aic_cal_post_process':
drivers/net/wireless/ath/ath9k/ar9003_aic.c:434:1: error: the frame size of 1040 bytes is larger than 1024 bytes [-Werror=frame-larger-than=]

It turns out that there are two large arrays on the stack here, but
almost all the data in them is never used outside of the loop in
which it gets written, so we can replace the array with a single
instance.

The .valid flag is used later, so I'm replacing the array of structures
with an array of bools. An obvious follow-up optimization would be
to replace it with a bitmask and set_bit()/find_first_bit()/
find_last_bit()/... operations. However, I have not tested this patch,
so I sticked to the simpler transformation that does the job of
reducing the stack usage to a harmless level.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath9k/ar9003_aic.c | 79 +++++++++++++++--------------
 drivers/net/wireless/ath/ath9k/ar9003_aic.h |  1 -
 2 files changed, 40 insertions(+), 40 deletions(-)

diff --git a/drivers/net/wireless/ath/ath9k/ar9003_aic.c b/drivers/net/wireless/ath/ath9k/ar9003_aic.c
index 1db119d77783..547cd46da260 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_aic.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_aic.c
@@ -53,19 +53,19 @@ static bool ar9003_hw_is_aic_enabled(struct ath_hw *ah)
 	return true;
 }
 
-static int16_t ar9003_aic_find_valid(struct ath_aic_sram_info *cal_sram,
+static int16_t ar9003_aic_find_valid(bool *cal_sram_valid,
 				     bool dir, u8 index)
 {
 	int16_t i;
 
 	if (dir) {
 		for (i = index + 1; i < ATH_AIC_MAX_BT_CHANNEL; i++) {
-			if (cal_sram[i].valid)
+			if (cal_sram_valid[i])
 				break;
 		}
 	} else {
 		for (i = index - 1; i >= 0; i--) {
-			if (cal_sram[i].valid)
+			if (cal_sram_valid[i])
 				break;
 		}
 	}
@@ -264,7 +264,7 @@ static u8 ar9003_aic_cal_start(struct ath_hw *ah, u8 min_valid_count)
 static bool ar9003_aic_cal_post_process(struct ath_hw *ah)
 {
 	struct ath9k_hw_aic *aic = &ah->btcoex_hw.aic;
-	struct ath_aic_sram_info cal_sram[ATH_AIC_MAX_BT_CHANNEL];
+	bool cal_sram_valid[ATH_AIC_MAX_BT_CHANNEL];
 	struct ath_aic_out_info aic_sram[ATH_AIC_MAX_BT_CHANNEL];
 	u32 dir_path_gain_idx, quad_path_gain_idx, value;
 	u32 fixed_com_att_db;
@@ -272,33 +272,34 @@ static bool ar9003_aic_cal_post_process(struct ath_hw *ah)
 	int16_t i;
 	bool ret = true;
 
-	memset(&cal_sram, 0, sizeof(cal_sram));
+	memset(&cal_sram_valid, 0, sizeof(cal_sram_valid));
 	memset(&aic_sram, 0, sizeof(aic_sram));
 
 	for (i = 0; i < ATH_AIC_MAX_BT_CHANNEL; i++) {
+		struct ath_aic_sram_info sram;
 		value = aic->aic_sram[i];
 
-		cal_sram[i].valid =
+		cal_sram_valid[i] = sram.valid =
 			MS(value, AR_PHY_AIC_SRAM_VALID);
-		cal_sram[i].rot_quad_att_db =
+		sram.rot_quad_att_db =
 			MS(value, AR_PHY_AIC_SRAM_ROT_QUAD_ATT_DB);
-		cal_sram[i].vga_quad_sign =
+		sram.vga_quad_sign =
 			MS(value, AR_PHY_AIC_SRAM_VGA_QUAD_SIGN);
-		cal_sram[i].rot_dir_att_db =
+		sram.rot_dir_att_db =
 			MS(value, AR_PHY_AIC_SRAM_ROT_DIR_ATT_DB);
-		cal_sram[i].vga_dir_sign =
+		sram.vga_dir_sign =
 			MS(value, AR_PHY_AIC_SRAM_VGA_DIR_SIGN);
-		cal_sram[i].com_att_6db =
+		sram.com_att_6db =
 			MS(value, AR_PHY_AIC_SRAM_COM_ATT_6DB);
 
-		if (cal_sram[i].valid) {
-			dir_path_gain_idx = cal_sram[i].rot_dir_att_db +
-				com_att_db_table[cal_sram[i].com_att_6db];
-			quad_path_gain_idx = cal_sram[i].rot_quad_att_db +
-				com_att_db_table[cal_sram[i].com_att_6db];
+		if (sram.valid) {
+			dir_path_gain_idx = sram.rot_dir_att_db +
+				com_att_db_table[sram.com_att_6db];
+			quad_path_gain_idx = sram.rot_quad_att_db +
+				com_att_db_table[sram.com_att_6db];
 
-			dir_path_sign = (cal_sram[i].vga_dir_sign) ? 1 : -1;
-			quad_path_sign = (cal_sram[i].vga_quad_sign) ? 1 : -1;
+			dir_path_sign = (sram.vga_dir_sign) ? 1 : -1;
+			quad_path_sign = (sram.vga_quad_sign) ? 1 : -1;
 
 			aic_sram[i].dir_path_gain_lin = dir_path_sign *
 				aic_lin_table[dir_path_gain_idx];
@@ -310,16 +311,16 @@ static bool ar9003_aic_cal_post_process(struct ath_hw *ah)
 	for (i = 0; i < ATH_AIC_MAX_BT_CHANNEL; i++) {
 		int16_t start_idx, end_idx;
 
-		if (cal_sram[i].valid)
+		if (cal_sram_valid[i])
 			continue;
 
-		start_idx = ar9003_aic_find_valid(cal_sram, 0, i);
-		end_idx = ar9003_aic_find_valid(cal_sram, 1, i);
+		start_idx = ar9003_aic_find_valid(cal_sram_valid, 0, i);
+		end_idx = ar9003_aic_find_valid(cal_sram_valid, 1, i);
 
 		if (start_idx < 0) {
 			/* extrapolation */
 			start_idx = end_idx;
-			end_idx = ar9003_aic_find_valid(cal_sram, 1, start_idx);
+			end_idx = ar9003_aic_find_valid(cal_sram_valid, 1, start_idx);
 
 			if (end_idx < 0) {
 				ret = false;
@@ -342,7 +343,7 @@ static bool ar9003_aic_cal_post_process(struct ath_hw *ah)
 
 		if (end_idx < 0) {
 			/* extrapolation */
-			end_idx = ar9003_aic_find_valid(cal_sram, 0, start_idx);
+			end_idx = ar9003_aic_find_valid(cal_sram_valid, 0, start_idx);
 
 			if (end_idx < 0) {
 				ret = false;
@@ -378,19 +379,21 @@ static bool ar9003_aic_cal_post_process(struct ath_hw *ah)
 	}
 
 	/* From dir/quad_path_gain_lin to sram. */
-	i = ar9003_aic_find_valid(cal_sram, 1, 0);
+	i = ar9003_aic_find_valid(cal_sram_valid, 1, 0);
 	if (i < 0) {
 		i = 0;
 		ret = false;
 	}
-	fixed_com_att_db = com_att_db_table[cal_sram[i].com_att_6db];
+	fixed_com_att_db = com_att_db_table[MS(aic->aic_sram[i],
+					    AR_PHY_AIC_SRAM_COM_ATT_6DB)];
 
 	for (i = 0; i < ATH_AIC_MAX_BT_CHANNEL; i++) {
 		int16_t rot_dir_path_att_db, rot_quad_path_att_db;
+		struct ath_aic_sram_info sram;
 
-		aic_sram[i].sram.vga_dir_sign =
+		sram.vga_dir_sign =
 			(aic_sram[i].dir_path_gain_lin >= 0) ? 1 : 0;
-		aic_sram[i].sram.vga_quad_sign=
+		sram.vga_quad_sign =
 			(aic_sram[i].quad_path_gain_lin >= 0) ? 1 : 0;
 
 		rot_dir_path_att_db =
@@ -400,33 +403,31 @@ static bool ar9003_aic_cal_post_process(struct ath_hw *ah)
 			ar9003_aic_find_index(0, abs(aic_sram[i].quad_path_gain_lin)) -
 			fixed_com_att_db;
 
-		aic_sram[i].sram.com_att_6db =
+		sram.com_att_6db =
 			ar9003_aic_find_index(1, fixed_com_att_db);
 
-		aic_sram[i].sram.valid = 1;
+		sram.valid = 1;
 
-		aic_sram[i].sram.rot_dir_att_db =
+		sram.rot_dir_att_db =
 			min(max(rot_dir_path_att_db,
 				(int16_t)ATH_AIC_MIN_ROT_DIR_ATT_DB),
 			    ATH_AIC_MAX_ROT_DIR_ATT_DB);
-		aic_sram[i].sram.rot_quad_att_db =
+		sram.rot_quad_att_db =
 			min(max(rot_quad_path_att_db,
 				(int16_t)ATH_AIC_MIN_ROT_QUAD_ATT_DB),
 			    ATH_AIC_MAX_ROT_QUAD_ATT_DB);
-	}
 
-	for (i = 0; i < ATH_AIC_MAX_BT_CHANNEL; i++) {
-		aic->aic_sram[i] = (SM(aic_sram[i].sram.vga_dir_sign,
+		aic->aic_sram[i] = (SM(sram.vga_dir_sign,
 				       AR_PHY_AIC_SRAM_VGA_DIR_SIGN) |
-				    SM(aic_sram[i].sram.vga_quad_sign,
+				    SM(sram.vga_quad_sign,
 				       AR_PHY_AIC_SRAM_VGA_QUAD_SIGN) |
-				    SM(aic_sram[i].sram.com_att_6db,
+				    SM(sram.com_att_6db,
 				       AR_PHY_AIC_SRAM_COM_ATT_6DB) |
-				    SM(aic_sram[i].sram.valid,
+				    SM(sram.valid,
 				       AR_PHY_AIC_SRAM_VALID) |
-				    SM(aic_sram[i].sram.rot_dir_att_db,
+				    SM(sram.rot_dir_att_db,
 				       AR_PHY_AIC_SRAM_ROT_DIR_ATT_DB) |
-				    SM(aic_sram[i].sram.rot_quad_att_db,
+				    SM(sram.rot_quad_att_db,
 				       AR_PHY_AIC_SRAM_ROT_QUAD_ATT_DB));
 	}
 
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_aic.h b/drivers/net/wireless/ath/ath9k/ar9003_aic.h
index 86f40644be43..9512c63799f2 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_aic.h
+++ b/drivers/net/wireless/ath/ath9k/ar9003_aic.h
@@ -50,7 +50,6 @@ struct ath_aic_sram_info {
 struct ath_aic_out_info {
 	int16_t dir_path_gain_lin;
 	int16_t quad_path_gain_lin;
-	struct ath_aic_sram_info sram;
 };
 
 u8 ar9003_aic_calibration(struct ath_hw *ah);
-- 
cgit v1.2.3


From 25c0f301425cecdc51d7cc6eb4fb163d464236bc Mon Sep 17 00:00:00 2001
From: Miaoqing Pan <miaoqing@codeaurora.org>
Date: Thu, 18 Feb 2016 17:20:02 +0800
Subject: ath9k: clear bb filter calibration power threshold

JP WiFi certification for bandwidth of channel 14 failed, the OBW
is lower than the requirement. Clear the bb filter calibration power
threshold to increase OBW(+2). The fix only for qca9531 chip now.

Signed-off-by: Miaoqing Pan <miaoqing@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath9k/ar9003_phy.c | 7 ++++++-
 drivers/net/wireless/ath/ath9k/ar9003_phy.h | 3 +++
 2 files changed, 9 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/ath/ath9k/ar9003_phy.c b/drivers/net/wireless/ath/ath9k/ar9003_phy.c
index abd964691d8c..06c1ca6e8290 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_phy.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_phy.c
@@ -976,9 +976,14 @@ static int ar9003_hw_process_ini(struct ath_hw *ah,
 	/*
 	 * JAPAN regulatory.
 	 */
-	if (chan->channel == 2484)
+	if (chan->channel == 2484) {
 		ar9003_hw_prog_ini(ah, &ah->iniCckfirJapan2484, 1);
 
+		if (AR_SREV_9531(ah))
+			REG_RMW_FIELD(ah, AR_PHY_FCAL_2_0,
+				      AR_PHY_FLC_PWR_THRESH, 0);
+	}
+
 	ah->modes_index = modesIndex;
 	ar9003_hw_override_ini(ah);
 	ar9003_hw_set_channel_regs(ah, chan);
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_phy.h b/drivers/net/wireless/ath/ath9k/ar9003_phy.h
index c5f8bc4b5595..566da789f97e 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_phy.h
+++ b/drivers/net/wireless/ath/ath9k/ar9003_phy.h
@@ -487,6 +487,9 @@
 #define AR_PHY_ADDAC_PARA_CTL    (AR_SM_BASE + 0x150)
 #define AR_PHY_XPA_CFG           (AR_SM_BASE + 0x158)
 
+#define AR_PHY_FLC_PWR_THRESH		7
+#define AR_PHY_FLC_PWR_THRESH_S		0
+
 #define AR_PHY_FRAME_CTL_CF_OVERLAP_WINDOW  3
 #define AR_PHY_FRAME_CTL_CF_OVERLAP_WINDOW_S    0
 
-- 
cgit v1.2.3