From a5c55d20f4251bcc22ce82ff82add9839027e818 Mon Sep 17 00:00:00 2001 From: Sarah Sharp Date: Mon, 14 Nov 2011 17:51:39 -0800 Subject: xhci: Fix USB 3.0 device restart on resume. commit d0cd5d482b8a6dc92c6c69a5387baf72ea84f23a upstream. The xHCI hub port code gets passed a zero-based port number by the USB core. It then adds one to in order to find a device slot by port number and device speed by calling xhci_find_slot_id_by_port. That function clearly states it requires a one-based port number. The xHCI port status change event handler was using a zero-based port number that it got from find_faked_portnum_from_hw_portnum, not a one-based port number. This lead to the doorbells never being rung for a device after a resume, or worse, a different device with the same speed having its doorbell rung (which could lead to bad power management in the xHCI host controller). This patch should be backported to kernels as old as 2.6.39. Signed-off-by: Sarah Sharp Acked-by: Andiry Xu Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci-ring.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index c0c5d6c7cb69..8784ab010419 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -1218,6 +1218,7 @@ static void handle_vendor_event(struct xhci_hcd *xhci, * * Returns a zero-based port number, which is suitable for indexing into each of * the split roothubs' port arrays and bus state arrays. + * Add one to it in order to call xhci_find_slot_id_by_port. */ static unsigned int find_faked_portnum_from_hw_portnum(struct usb_hcd *hcd, struct xhci_hcd *xhci, u32 port_id) @@ -1340,7 +1341,7 @@ static void handle_port_status(struct xhci_hcd *xhci, temp |= PORT_LINK_STROBE | XDEV_U0; xhci_writel(xhci, temp, port_array[faked_port_index]); slot_id = xhci_find_slot_id_by_port(hcd, xhci, - faked_port_index); + faked_port_index + 1); if (!slot_id) { xhci_dbg(xhci, "slot_id is zero\n"); goto cleanup; -- cgit v1.2.3