From 98b00488459e9d27d8e42b6d241f309f26ffde07 Mon Sep 17 00:00:00 2001 From: Jon Hunter Date: Wed, 29 Jun 2016 10:17:52 +0100 Subject: dt-bindings: i2c: Add support for 'i2c-bus' subnode The I2C driver core for boards using device-tree assumes any subnode of an I2C adapter in the device-tree blob is an I2C slave device. Although this makes complete sense, some I2C adapters may have subnodes which are not I2C slaves but subnodes presenting other features. For example some Tegra devices have an I2C interface which may share its pins with other devices. In order to share these pins using the pinctrl framework, it is necessary to add subnodes to the I2C device node that represent these pins. To allow I2C adapters to have non-I2C specific subnodes in device-tree that are not parsed by the I2C driver core, add support for an optional 'i2c-bus' subnode where I2C slaves can be placed. If the 'i2c-bus' subnode is present then all I2C slaves must be placed under this subnode. Signed-off-by: Jon Hunter Acked-by: Thierry Reding Acked-by: Rob Herring Acked-by: Wolfram Sang Signed-off-by: Thierry Reding --- Documentation/devicetree/bindings/i2c/i2c.txt | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/Documentation/devicetree/bindings/i2c/i2c.txt b/Documentation/devicetree/bindings/i2c/i2c.txt index c8d977ed847f..a07452854118 100644 --- a/Documentation/devicetree/bindings/i2c/i2c.txt +++ b/Documentation/devicetree/bindings/i2c/i2c.txt @@ -32,6 +32,14 @@ wants to support one of the below features, it should adapt the bindings below. - clock-frequency frequency of bus clock in Hz. +- i2c-bus + For I2C adapters that have child nodes that are a mixture of both I2C + devices and non-I2C devices, the 'i2c-bus' subnode can be used for + populating I2C devices. If the 'i2c-bus' subnode is present, only + subnodes of this will be considered as I2C slaves. The properties, + '#address-cells' and '#size-cells' must be defined under this subnode + if present. + - i2c-scl-falling-time-ns Number of nanoseconds the SCL signal takes to fall; t(f) in the I2C specification. -- cgit v1.2.3 From 7e4c224abfe8e2a00f56a2ef0198e6de3ca1852c Mon Sep 17 00:00:00 2001 From: Jon Hunter Date: Wed, 29 Jun 2016 10:17:53 +0100 Subject: i2c: core: Add support for 'i2c-bus' subnode If the 'i2c-bus' device-tree node is present for an I2C adapter then parse this subnode for I2C slaves. Signed-off-by: Jon Hunter Acked-by: Wolfram Sang Signed-off-by: Thierry Reding --- drivers/i2c/i2c-core.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c index af11b658984d..ed7002dd9401 100644 --- a/drivers/i2c/i2c-core.c +++ b/drivers/i2c/i2c-core.c @@ -1411,7 +1411,7 @@ static struct i2c_client *of_i2c_register_device(struct i2c_adapter *adap, static void of_i2c_register_devices(struct i2c_adapter *adap) { - struct device_node *node; + struct device_node *bus, *node; /* Only register child devices if the adapter has a node pointer set */ if (!adap->dev.of_node) @@ -1419,11 +1419,17 @@ static void of_i2c_register_devices(struct i2c_adapter *adap) dev_dbg(&adap->dev, "of_i2c: walking child nodes\n"); - for_each_available_child_of_node(adap->dev.of_node, node) { + bus = of_get_child_by_name(adap->dev.of_node, "i2c-bus"); + if (!bus) + bus = of_node_get(adap->dev.of_node); + + for_each_available_child_of_node(bus, node) { if (of_node_test_and_set_flag(node, OF_POPULATED)) continue; of_i2c_register_device(adap, node); } + + of_node_put(bus); } static int of_dev_node_match(struct device *dev, void *data) -- cgit v1.2.3