From b1404069f64457c94de241738fdca142c2e5698f Mon Sep 17 00:00:00 2001 From: "David J. Wilder" Date: Fri, 8 Aug 2008 15:51:29 -0700 Subject: IPoIB/cm: Use vmalloc() to allocate rx_rings There are users that are running UDP applications that require a large receive queue size in order to get good performance. To prevent allocation failures for rx_rings when using non-SRQ mode and large recv_queue_size (1K or larger), use vmalloc() instead of kcalloc() to alocate rx_rings. Signed-off-by: David Wilder Signed-off-by: Roland Dreier --- drivers/infiniband/ulp/ipoib/ipoib_cm.c | 17 ++++++++++++----- 1 file changed, 12 insertions(+), 5 deletions(-) diff --git a/drivers/infiniband/ulp/ipoib/ipoib_cm.c b/drivers/infiniband/ulp/ipoib/ipoib_cm.c index 7ebc400a4b3d..341ffedafed6 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib_cm.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_cm.c @@ -202,7 +202,7 @@ static void ipoib_cm_free_rx_ring(struct net_device *dev, dev_kfree_skb_any(rx_ring[i].skb); } - kfree(rx_ring); + vfree(rx_ring); } static void ipoib_cm_start_rx_drain(struct ipoib_dev_priv *priv) @@ -352,9 +352,14 @@ static int ipoib_cm_nonsrq_init_rx(struct net_device *dev, struct ib_cm_id *cm_i int ret; int i; - rx->rx_ring = kcalloc(ipoib_recvq_size, sizeof *rx->rx_ring, GFP_KERNEL); - if (!rx->rx_ring) + rx->rx_ring = vmalloc(ipoib_recvq_size * sizeof *rx->rx_ring); + if (!rx->rx_ring) { + printk(KERN_WARNING "%s: failed to allocate CM non-SRQ ring (%d entries)\n", + priv->ca->name, ipoib_recvq_size); return -ENOMEM; + } + + memset(rx->rx_ring, 0, ipoib_recvq_size * sizeof *rx->rx_ring); t = kmalloc(sizeof *t, GFP_KERNEL); if (!t) { @@ -1494,14 +1499,16 @@ static void ipoib_cm_create_srq(struct net_device *dev, int max_sge) return; } - priv->cm.srq_ring = kzalloc(ipoib_recvq_size * sizeof *priv->cm.srq_ring, - GFP_KERNEL); + priv->cm.srq_ring = vmalloc(ipoib_recvq_size * sizeof *priv->cm.srq_ring); if (!priv->cm.srq_ring) { printk(KERN_WARNING "%s: failed to allocate CM SRQ ring (%d entries)\n", priv->ca->name, ipoib_recvq_size); ib_destroy_srq(priv->cm.srq); priv->cm.srq = NULL; + return; } + + memset(priv->cm.srq_ring, 0, ipoib_recvq_size * sizeof *priv->cm.srq_ring); } int ipoib_cm_dev_init(struct net_device *dev) -- cgit v1.2.3 From 51ad241af45a0bfc02d1ed72a3ad58b46f8e30df Mon Sep 17 00:00:00 2001 From: Alexander Schmidt Date: Tue, 12 Aug 2008 15:46:07 +0200 Subject: IB/ehca: Update qp_state on cached modify_qp() Since the introduction of the port auto-detect mode for ehca, calls to modify_qp() may be cached in the device driver when the ports are not activated yet. When a modify_qp() call is cached, the qp state remains untouched until the port is activated, which will leave the qp in the reset state. In the reset state, however, it is not allowed to post SQ WQEs, which confuses applications like ib_mad. The solution for this problem is to immediately set the qp state as requested by modify_qp(), even when the call is cached. Signed-off-by: Alexander Schmidt Signed-off-by: Roland Dreier --- drivers/infiniband/hw/ehca/ehca_qp.c | 14 ++++++++++---- 1 file changed, 10 insertions(+), 4 deletions(-) diff --git a/drivers/infiniband/hw/ehca/ehca_qp.c b/drivers/infiniband/hw/ehca/ehca_qp.c index ea13efddf175..c58fd4eead18 100644 --- a/drivers/infiniband/hw/ehca/ehca_qp.c +++ b/drivers/infiniband/hw/ehca/ehca_qp.c @@ -1534,8 +1534,6 @@ static int internal_modify_qp(struct ib_qp *ibqp, if (attr_mask & IB_QP_QKEY) my_qp->qkey = attr->qkey; - my_qp->state = qp_new_state; - modify_qp_exit2: if (squeue_locked) { /* this means: sqe -> rts */ spin_unlock_irqrestore(&my_qp->spinlock_s, flags); @@ -1551,6 +1549,8 @@ modify_qp_exit1: int ehca_modify_qp(struct ib_qp *ibqp, struct ib_qp_attr *attr, int attr_mask, struct ib_udata *udata) { + int ret = 0; + struct ehca_shca *shca = container_of(ibqp->device, struct ehca_shca, ib_device); struct ehca_qp *my_qp = container_of(ibqp, struct ehca_qp, ib_qp); @@ -1597,12 +1597,18 @@ int ehca_modify_qp(struct ib_qp *ibqp, struct ib_qp_attr *attr, int attr_mask, attr->qp_state, my_qp->init_attr.port_num, ibqp->qp_type); spin_unlock_irqrestore(&sport->mod_sqp_lock, flags); - return 0; + goto out; } spin_unlock_irqrestore(&sport->mod_sqp_lock, flags); } - return internal_modify_qp(ibqp, attr, attr_mask, 0); + ret = internal_modify_qp(ibqp, attr, attr_mask, 0); + +out: + if ((ret == 0) && (attr_mask & IB_QP_STATE)) + my_qp->state = attr->qp_state; + + return ret; } void ehca_recover_sqp(struct ib_qp *sqp) -- cgit v1.2.3 From 6c02eed9302e7c27ee150d7911b83843c2206148 Mon Sep 17 00:00:00 2001 From: Alexander Schmidt Date: Tue, 12 Aug 2008 15:46:13 +0200 Subject: IB/ehca: Rename goto label in ehca_poll_cq_one() Rename the "poll_cq_one_read_cqe" goto label to what it actually does, namely "repoll". Signed-off-by: Alexander Schmidt Signed-off-by: Roland Dreier --- drivers/infiniband/hw/ehca/ehca_reqs.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/infiniband/hw/ehca/ehca_reqs.c b/drivers/infiniband/hw/ehca/ehca_reqs.c index 898c8b5c38dd..d0a1c674a11b 100644 --- a/drivers/infiniband/hw/ehca/ehca_reqs.c +++ b/drivers/infiniband/hw/ehca/ehca_reqs.c @@ -589,7 +589,7 @@ static inline int ehca_poll_cq_one(struct ib_cq *cq, struct ib_wc *wc) struct ehca_qp *my_qp; int cqe_count = 0, is_error; -poll_cq_one_read_cqe: +repoll: cqe = (struct ehca_cqe *) ipz_qeit_get_inc_valid(&my_cq->ipz_queue); if (!cqe) { @@ -617,7 +617,7 @@ poll_cq_one_read_cqe: ehca_dmp(cqe, 64, "cq_num=%x qp_num=%x", my_cq->cq_number, cqe->local_qp_number); /* ignore this purged cqe */ - goto poll_cq_one_read_cqe; + goto repoll; } spin_lock_irqsave(&qp->spinlock_s, flags); purgeflag = qp->sqerr_purgeflag; @@ -636,7 +636,7 @@ poll_cq_one_read_cqe: * that caused sqe and turn off purge flag */ qp->sqerr_purgeflag = 0; - goto poll_cq_one_read_cqe; + goto repoll; } } -- cgit v1.2.3 From 17c2b53adbf1ebd7a8b6a63e2597199676426dbf Mon Sep 17 00:00:00 2001 From: Alexander Schmidt Date: Tue, 12 Aug 2008 15:46:20 +0200 Subject: IB/ehca: Repoll CQ on invalid opcode When the ehca driver detects an invalid opcode in a CQE, it currently passes the CQE to the application and returns with success. This patch changes the CQE handling to discard CQEs with invalid opcodes and to continue reading the next CQE from the CQ. Signed-off-by: Alexander Schmidt Signed-off-by: Roland Dreier --- drivers/infiniband/hw/ehca/ehca_reqs.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/infiniband/hw/ehca/ehca_reqs.c b/drivers/infiniband/hw/ehca/ehca_reqs.c index d0a1c674a11b..acb8649151e0 100644 --- a/drivers/infiniband/hw/ehca/ehca_reqs.c +++ b/drivers/infiniband/hw/ehca/ehca_reqs.c @@ -667,7 +667,7 @@ repoll: ehca_dmp(cqe, 64, "ehca_cq=%p cq_num=%x", my_cq, my_cq->cq_number); /* update also queue adder to throw away this entry!!! */ - goto poll_cq_one_exit0; + goto repoll; } /* eval ib_wc_status */ -- cgit v1.2.3 From 129a10fb81309f455eeb444560ec38657d29c46f Mon Sep 17 00:00:00 2001 From: Alexander Schmidt Date: Tue, 12 Aug 2008 15:46:27 +0200 Subject: IB/ehca: Check idr_find() return value The idr_find() function may fail when trying to get the QP that is associated with a CQE, e.g. when a QP has been destroyed between the generation of a CQE and the poll request for it. In consequence, the return value of idr_find() must be checked and the CQE must be discarded when the QP cannot be found. Signed-off-by: Alexander Schmidt Signed-off-by: Roland Dreier --- drivers/infiniband/hw/ehca/ehca_reqs.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/infiniband/hw/ehca/ehca_reqs.c b/drivers/infiniband/hw/ehca/ehca_reqs.c index acb8649151e0..cea3eba9c83e 100644 --- a/drivers/infiniband/hw/ehca/ehca_reqs.c +++ b/drivers/infiniband/hw/ehca/ehca_reqs.c @@ -680,8 +680,10 @@ repoll: read_lock(&ehca_qp_idr_lock); my_qp = idr_find(&ehca_qp_idr, cqe->qp_token); - wc->qp = &my_qp->ib_qp; read_unlock(&ehca_qp_idr_lock); + if (!my_qp) + goto repoll; + wc->qp = &my_qp->ib_qp; wc->byte_len = cqe->nr_bytes_transferred; wc->pkey_index = cqe->pkey_index; -- cgit v1.2.3 From 6773f079b72ab0200fe9afa9bb0c656a6af5400c Mon Sep 17 00:00:00 2001 From: Alexander Schmidt Date: Tue, 12 Aug 2008 15:46:30 +0200 Subject: IB/ehca: Discard double CQE for one WR Under rare circumstances, the ehca hardware might erroneously generate two CQEs for the same WQE, which is not compliant to the IB spec and will cause unpredictable errors like memory being freed twice. To avoid this problem, the driver needs to detect the second CQE and discard it. For this purpose, introduce an array holding as many elements as the SQ of the QP, called sq_map. Each sq_map entry stores a "reported" flag for one WQE in the SQ. When a work request is posted to the SQ, the respective "reported" flag is set to zero. After the arrival of a CQE, the flag is set to 1, which allows to detect the occurence of a second CQE. The mapping between WQE / CQE and the corresponding sq_map element is implemented by replacing the lowest 16 Bits of the wr_id with the index in the queue map. The original 16 Bits are stored in the sq_map entry and are restored when the CQE is passed to the application. Signed-off-by: Alexander Schmidt Signed-off-by: Roland Dreier --- drivers/infiniband/hw/ehca/ehca_classes.h | 9 ++++++ drivers/infiniband/hw/ehca/ehca_qes.h | 1 + drivers/infiniband/hw/ehca/ehca_qp.c | 34 +++++++++++++------ drivers/infiniband/hw/ehca/ehca_reqs.c | 54 ++++++++++++++++++++++++------- 4 files changed, 78 insertions(+), 20 deletions(-) diff --git a/drivers/infiniband/hw/ehca/ehca_classes.h b/drivers/infiniband/hw/ehca/ehca_classes.h index 0b0618edd645..1ab919f836a8 100644 --- a/drivers/infiniband/hw/ehca/ehca_classes.h +++ b/drivers/infiniband/hw/ehca/ehca_classes.h @@ -156,6 +156,14 @@ struct ehca_mod_qp_parm { #define EHCA_MOD_QP_PARM_MAX 4 +#define QMAP_IDX_MASK 0xFFFFULL + +/* struct for tracking if cqes have been reported to the application */ +struct ehca_qmap_entry { + u16 app_wr_id; + u16 reported; +}; + struct ehca_qp { union { struct ib_qp ib_qp; @@ -165,6 +173,7 @@ struct ehca_qp { enum ehca_ext_qp_type ext_type; enum ib_qp_state state; struct ipz_queue ipz_squeue; + struct ehca_qmap_entry *sq_map; struct ipz_queue ipz_rqueue; struct h_galpas galpas; u32 qkey; diff --git a/drivers/infiniband/hw/ehca/ehca_qes.h b/drivers/infiniband/hw/ehca/ehca_qes.h index 818803057ebf..5d28e3e98a20 100644 --- a/drivers/infiniband/hw/ehca/ehca_qes.h +++ b/drivers/infiniband/hw/ehca/ehca_qes.h @@ -213,6 +213,7 @@ struct ehca_wqe { #define WC_STATUS_ERROR_BIT 0x80000000 #define WC_STATUS_REMOTE_ERROR_FLAGS 0x0000F800 #define WC_STATUS_PURGE_BIT 0x10 +#define WC_SEND_RECEIVE_BIT 0x80 struct ehca_cqe { u64 work_request_id; diff --git a/drivers/infiniband/hw/ehca/ehca_qp.c b/drivers/infiniband/hw/ehca/ehca_qp.c index c58fd4eead18..b6bcee036734 100644 --- a/drivers/infiniband/hw/ehca/ehca_qp.c +++ b/drivers/infiniband/hw/ehca/ehca_qp.c @@ -412,6 +412,7 @@ static struct ehca_qp *internal_create_qp( struct ehca_shca *shca = container_of(pd->device, struct ehca_shca, ib_device); struct ib_ucontext *context = NULL; + u32 nr_qes; u64 h_ret; int is_llqp = 0, has_srq = 0; int qp_type, max_send_sge, max_recv_sge, ret; @@ -715,6 +716,15 @@ static struct ehca_qp *internal_create_qp( "and pages ret=%i", ret); goto create_qp_exit2; } + nr_qes = my_qp->ipz_squeue.queue_length / + my_qp->ipz_squeue.qe_size; + my_qp->sq_map = vmalloc(nr_qes * + sizeof(struct ehca_qmap_entry)); + if (!my_qp->sq_map) { + ehca_err(pd->device, "Couldn't allocate squeue " + "map ret=%i", ret); + goto create_qp_exit3; + } } if (HAS_RQ(my_qp)) { @@ -724,7 +734,7 @@ static struct ehca_qp *internal_create_qp( if (ret) { ehca_err(pd->device, "Couldn't initialize rqueue " "and pages ret=%i", ret); - goto create_qp_exit3; + goto create_qp_exit4; } } @@ -770,7 +780,7 @@ static struct ehca_qp *internal_create_qp( if (!my_qp->mod_qp_parm) { ehca_err(pd->device, "Could not alloc mod_qp_parm"); - goto create_qp_exit4; + goto create_qp_exit5; } } } @@ -780,7 +790,7 @@ static struct ehca_qp *internal_create_qp( h_ret = ehca_define_sqp(shca, my_qp, init_attr); if (h_ret != H_SUCCESS) { ret = ehca2ib_return_code(h_ret); - goto create_qp_exit5; + goto create_qp_exit6; } } @@ -789,7 +799,7 @@ static struct ehca_qp *internal_create_qp( if (ret) { ehca_err(pd->device, "Couldn't assign qp to send_cq ret=%i", ret); - goto create_qp_exit5; + goto create_qp_exit6; } } @@ -815,22 +825,26 @@ static struct ehca_qp *internal_create_qp( if (ib_copy_to_udata(udata, &resp, sizeof resp)) { ehca_err(pd->device, "Copy to udata failed"); ret = -EINVAL; - goto create_qp_exit6; + goto create_qp_exit7; } } return my_qp; -create_qp_exit6: +create_qp_exit7: ehca_cq_unassign_qp(my_qp->send_cq, my_qp->real_qp_num); -create_qp_exit5: +create_qp_exit6: kfree(my_qp->mod_qp_parm); -create_qp_exit4: +create_qp_exit5: if (HAS_RQ(my_qp)) ipz_queue_dtor(my_pd, &my_qp->ipz_rqueue); +create_qp_exit4: + if (HAS_SQ(my_qp)) + vfree(my_qp->sq_map); + create_qp_exit3: if (HAS_SQ(my_qp)) ipz_queue_dtor(my_pd, &my_qp->ipz_squeue); @@ -1979,8 +1993,10 @@ static int internal_destroy_qp(struct ib_device *dev, struct ehca_qp *my_qp, if (HAS_RQ(my_qp)) ipz_queue_dtor(my_pd, &my_qp->ipz_rqueue); - if (HAS_SQ(my_qp)) + if (HAS_SQ(my_qp)) { ipz_queue_dtor(my_pd, &my_qp->ipz_squeue); + vfree(my_qp->sq_map); + } kmem_cache_free(qp_cache, my_qp); atomic_dec(&shca->num_qps); return 0; diff --git a/drivers/infiniband/hw/ehca/ehca_reqs.c b/drivers/infiniband/hw/ehca/ehca_reqs.c index cea3eba9c83e..4426d82fe798 100644 --- a/drivers/infiniband/hw/ehca/ehca_reqs.c +++ b/drivers/infiniband/hw/ehca/ehca_reqs.c @@ -139,6 +139,7 @@ static void trace_send_wr_ud(const struct ib_send_wr *send_wr) static inline int ehca_write_swqe(struct ehca_qp *qp, struct ehca_wqe *wqe_p, const struct ib_send_wr *send_wr, + u32 sq_map_idx, int hidden) { u32 idx; @@ -157,7 +158,11 @@ static inline int ehca_write_swqe(struct ehca_qp *qp, /* clear wqe header until sglist */ memset(wqe_p, 0, offsetof(struct ehca_wqe, u.ud_av.sg_list)); - wqe_p->work_request_id = send_wr->wr_id; + wqe_p->work_request_id = send_wr->wr_id & ~QMAP_IDX_MASK; + wqe_p->work_request_id |= sq_map_idx & QMAP_IDX_MASK; + + qp->sq_map[sq_map_idx].app_wr_id = send_wr->wr_id & QMAP_IDX_MASK; + qp->sq_map[sq_map_idx].reported = 0; switch (send_wr->opcode) { case IB_WR_SEND: @@ -381,6 +386,7 @@ static inline int post_one_send(struct ehca_qp *my_qp, { struct ehca_wqe *wqe_p; int ret; + u32 sq_map_idx; u64 start_offset = my_qp->ipz_squeue.current_q_offset; /* get pointer next to free WQE */ @@ -393,8 +399,15 @@ static inline int post_one_send(struct ehca_qp *my_qp, "qp_num=%x", my_qp->ib_qp.qp_num); return -ENOMEM; } + + /* + * Get the index of the WQE in the send queue. The same index is used + * for writing into the sq_map. + */ + sq_map_idx = start_offset / my_qp->ipz_squeue.qe_size; + /* write a SEND WQE into the QUEUE */ - ret = ehca_write_swqe(my_qp, wqe_p, cur_send_wr, hidden); + ret = ehca_write_swqe(my_qp, wqe_p, cur_send_wr, sq_map_idx, hidden); /* * if something failed, * reset the free entry pointer to the start value @@ -654,8 +667,34 @@ repoll: my_cq, my_cq->cq_number); } - /* we got a completion! */ - wc->wr_id = cqe->work_request_id; + read_lock(&ehca_qp_idr_lock); + my_qp = idr_find(&ehca_qp_idr, cqe->qp_token); + read_unlock(&ehca_qp_idr_lock); + if (!my_qp) + goto repoll; + wc->qp = &my_qp->ib_qp; + + if (!(cqe->w_completion_flags & WC_SEND_RECEIVE_BIT)) { + struct ehca_qmap_entry *qmap_entry; + /* + * We got a send completion and need to restore the original + * wr_id. + */ + qmap_entry = &my_qp->sq_map[cqe->work_request_id & + QMAP_IDX_MASK]; + + if (qmap_entry->reported) { + ehca_warn(cq->device, "Double cqe on qp_num=%#x", + my_qp->real_qp_num); + /* found a double cqe, discard it and read next one */ + goto repoll; + } + wc->wr_id = cqe->work_request_id & ~QMAP_IDX_MASK; + wc->wr_id |= qmap_entry->app_wr_id; + qmap_entry->reported = 1; + } else + /* We got a receive completion. */ + wc->wr_id = cqe->work_request_id; /* eval ib_wc_opcode */ wc->opcode = ib_wc_opcode[cqe->optype]-1; @@ -678,13 +717,6 @@ repoll: } else wc->status = IB_WC_SUCCESS; - read_lock(&ehca_qp_idr_lock); - my_qp = idr_find(&ehca_qp_idr, cqe->qp_token); - read_unlock(&ehca_qp_idr_lock); - if (!my_qp) - goto repoll; - wc->qp = &my_qp->ib_qp; - wc->byte_len = cqe->nr_bytes_transferred; wc->pkey_index = cqe->pkey_index; wc->slid = cqe->rlid; -- cgit v1.2.3