From f1a1c2dc2a956c375b432d2a9a28e52ba9d81c7c Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Sat, 25 Mar 2006 03:08:17 -0800 Subject: [PATCH] doc: more serial-console info Add info on flow control for serial consoles. Refer to netconsole option also. Signed-off-by: Randy Dunlap Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- Documentation/serial-console.txt | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) (limited to 'Documentation/serial-console.txt') diff --git a/Documentation/serial-console.txt b/Documentation/serial-console.txt index 6c689b0df2b8..9a7bc8b3f479 100644 --- a/Documentation/serial-console.txt +++ b/Documentation/serial-console.txt @@ -17,11 +17,13 @@ The format of this option is: ttyX for any other virtual console ttySx for a serial port lp0 for the first parallel port + ttyUSB0 for the first USB serial device options: depend on the driver. For the serial port this - defines the baudrate/parity/bits of the port, - in the format BBBBPN, where BBBB is the speed, - P is parity (n/o/e), and N is bits. Default is + defines the baudrate/parity/bits/flow control of + the port, in the format BBBBPNF, where BBBB is the + speed, P is parity (n/o/e), N is number of bits, + and F is flow control ('r' for RTS). Default is 9600n8. The maximum baudrate is 115200. You can specify multiple console= options on the kernel command line. @@ -45,6 +47,9 @@ become the console. You will need to create a new device to use /dev/console. The official /dev/console is now character device 5,1. +(You can also use a network device as a console. See +Documentation/networking/netconsole.txt for information on that.) + Here's an example that will use /dev/ttyS1 (COM2) as the console. Replace the sample values as needed. -- cgit v1.2.3