From 39c3d488452ae206cfc8afda0db041ee55d01c3c Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Sat, 25 Dec 2010 07:44:33 -0300 Subject: [media] cpia, stradis: remove deprecated V4L1 drivers Nobody stepped in to convert these drivers to V4L2, so they are now removed from the kernel. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- Documentation/video4linux/README.cpia | 191 ---------------------------------- Documentation/video4linux/bttv/Cards | 4 - 2 files changed, 195 deletions(-) delete mode 100644 Documentation/video4linux/README.cpia (limited to 'Documentation/video4linux') diff --git a/Documentation/video4linux/README.cpia b/Documentation/video4linux/README.cpia deleted file mode 100644 index 8a747fee661f..000000000000 --- a/Documentation/video4linux/README.cpia +++ /dev/null @@ -1,191 +0,0 @@ -This is a driver for the CPiA PPC2 driven parallel connected -Camera. For example the Creative WebcamII is CPiA driven. - - ) [1]Peter Pregler, Linz 2000, published under the [2]GNU GPL - ---------------------------------------------------------------------------- - -USAGE: - -General: -======== - -1) Make sure you have created the video devices (/dev/video*): - -- if you have a recent MAKEDEV do a 'cd /dev;./MAKEDEV video' -- otherwise do a: - -cd /dev -mknod video0 c 81 0 -ln -s video0 video - -2) Compile the kernel (see below for the list of options to use), - configure your parport and reboot. - -3) If all worked well you should get messages similar - to the following (your versions may be different) on the console: - -V4L-Driver for Vision CPiA based cameras v0.7.4 -parport0: read2 timeout. -parport0: Multimedia device, VLSI Vision Ltd PPC2 -Parallel port driver for Vision CPiA based camera - CPIA Version: 1.20 (2.0) - CPIA PnP-ID: 0553:0002:0100 - VP-Version: 1.0 0100 - 1 camera(s) found - - -As modules: -=========== - -Make sure you have selected the following kernel options (you can -select all stuff as modules): - -The cpia-stuff is in the section 'Character devices -> Video For Linux'. - -CONFIG_PARPORT=m -CONFIG_PARPORT_PC=m -CONFIG_PARPORT_PC_FIFO=y -CONFIG_PARPORT_1284=y -CONFIG_VIDEO_DEV=m -CONFIG_VIDEO_CPIA=m -CONFIG_VIDEO_CPIA_PP=m - -For autoloading of all those modules you need to tell module-init-tools -some stuff. Add the following line to your module-init-tools config-file -(e.g. /etc/modprobe.conf or wherever your distribution does store that -stuff): - -options parport_pc io=0x378 irq=7 dma=3 -alias char-major-81 cpia_pp - -The first line tells the dma/irq channels to use. Those _must_ match -the settings of your BIOS. Do NOT simply use the values above. See -Documentation/parport.txt for more information about this. The second -line associates the video-device file with the driver. Of cause you -can also load the modules once upon boot (usually done in /etc/modules). - -Linked into the kernel: -======================= - -Make sure you have selected the following kernel options. Note that -you cannot compile the parport-stuff as modules and the cpia-driver -statically (the other way round is okay though). - -The cpia-stuff is in the section 'Character devices -> Video For Linux'. - -CONFIG_PARPORT=y -CONFIG_PARPORT_PC=y -CONFIG_PARPORT_PC_FIFO=y -CONFIG_PARPORT_1284=y -CONFIG_VIDEO_DEV=y -CONFIG_VIDEO_CPIA=y -CONFIG_VIDEO_CPIA_PP=y - -To use DMA/irq you will need to tell the kernel upon boot time the -hardware configuration of the parport. You can give the boot-parameter -at the LILO-prompt or specify it in lilo.conf. I use the following -append-line in lilo.conf: - - append="parport=0x378,7,3" - -See Documentation/parport.txt for more information about the -configuration of the parport and the values given above. Do not simply -use the values given above. - ---------------------------------------------------------------------------- -FEATURES: - -- mmap/read v4l-interface (but no overlay) -- image formats: CIF/QCIF, SIF/QSIF, various others used by isabel; - note: all sizes except CIF/QCIF are implemented by clipping, i.e. - pixels are not uploaded from the camera -- palettes: VIDEO_PALETTE_GRAY, VIDEO_PALETTE_RGB565, VIDEO_PALETTE_RGB555, - VIDEO_PALETTE_RGB24, VIDEO_PALETTE_RGB32, VIDEO_PALETTE_YUYV, - VIDEO_PALETTE_UYVY, VIDEO_PALETTE_YUV422 -- state information (color balance, exposure, ...) is preserved between - device opens -- complete control over camera via proc-interface (_all_ camera settings are - supported), there is also a python-gtk application available for this [3] -- works under SMP (but the driver is completely serialized and synchronous) - so you get no benefit from SMP, but at least it does not crash your box -- might work for non-Intel architecture, let us know about this - ---------------------------------------------------------------------------- -TESTED APPLICATIONS: - -- a simple test application based on Xt is available at [3] -- another test-application based on gqcam-0.4 (uses GTK) -- gqcam-0.6 should work -- xawtv-3.x (also the webcam software) -- xawtv-2.46 -- w3cam (cgi-interface and vidcat, e.g. you may try out 'vidcat |xv - -maxpect -root -quit +noresetroot -rmode 5 -') -- vic, the MBONE video conferencing tool (version 2.8ucl4-1) -- isabel 3R4beta (barely working, but AFAICT all the problems are on - their side) -- camserv-0.40 - -See [3] for pointers to v4l-applications. - ---------------------------------------------------------------------------- -KNOWN PROBLEMS: - -- some applications do not handle the image format correctly, you will - see strange horizontal stripes instead of a nice picture -> make sure - your application does use a supported image size or queries the driver - for the actually used size (reason behind this: the camera cannot - provide any image format, so if size NxM is requested the driver will - use a format to the closest fitting N1xM1, the application should now - query for this granted size, most applications do not). -- all the todo ;) -- if there is not enough light and the picture is too dark try to - adjust the SetSensorFPS setting, automatic frame rate adjustment - has its price -- do not try out isabel 3R4beta (built 135), you will be disappointed - ---------------------------------------------------------------------------- -TODO: - -- multiple camera support (struct camera or something) - This should work, - but hasn't been tested yet. -- architecture independence? -- SMP-safe asynchronous mmap interface -- nibble mode for old parport interfaces -- streaming capture, this should give a performance gain - ---------------------------------------------------------------------------- -IMPLEMENTATION NOTES: - -The camera can act in two modes, streaming or grabbing. Right now a -polling grab-scheme is used. Maybe interrupt driven streaming will be -used for a asynchronous mmap interface in the next major release of the -driver. This might give a better frame rate. - ---------------------------------------------------------------------------- -THANKS (in no particular order): - -- Scott J. Bertin for cleanups, the proc-filesystem - and much more -- Henry Bruce for providing developers information about - the CPiA chip, I wish all companies would treat Linux as seriously -- Karoly Erdei and RISC-Linz for being - my boss ;) resp. my employer and for providing me the hardware and - allow me to devote some working time to this project -- Manuel J. Petit de Gabriel for providing help - with Isabel (http://isabel.dit.upm.es/) -- Bas Huisman for writing the initial parport code -- Jarl Totland for setting up the mailing list - and maintaining the web-server[3] -- Chris Whiteford for fixes related to the - 1.02 firmware -- special kudos to all the tester whose machines crashed and/or - will crash. :) - ---------------------------------------------------------------------------- -REFERENCES - - 1. http://www.risc.uni-linz.ac.at/ - mailto:Peter_Pregler@email.com - 2. see the file COPYING in the top directory of the kernel tree - 3. http://webcam.sourceforge.net/ diff --git a/Documentation/video4linux/bttv/Cards b/Documentation/video4linux/bttv/Cards index 12217fc49725..db833ced2cb8 100644 --- a/Documentation/video4linux/bttv/Cards +++ b/Documentation/video4linux/bttv/Cards @@ -464,10 +464,6 @@ Siemens ------- Multimedia eXtension Board (MXB) (SAA7146, SAA7111) -Stradis -------- - SDM275,SDM250,SDM026,SDM025 (SAA7146, IBMMPEG2): MPEG2 decoder only - Powercolor ---------- MTV878 -- cgit v1.2.3