From 14fd8ed0a7fd199131425fe9e802173c4ba6a4e9 Mon Sep 17 00:00:00 2001 From: Ezequiel Garcia Date: Fri, 26 Jul 2013 10:18:00 -0300 Subject: ARM: mvebu: Relocate Armada 370/XP PCIe device tree nodes Now that mbus has been added to the device tree, it's possible to move the PCIe nodes out of internal registers, placing it directly below the mbus. This is a more accurate representation of the hardware. Moving the PCIe nodes, we now need to introduce an extra cell to encode the window target ID and attribute. Since this depends on the PCIe port, we split the ranges translation entries, to correspond to each MBus window. Signed-off-by: Thomas Petazzoni Signed-off-by: Ezequiel Garcia Tested-by: Andrew Lunn Tested-by: Sebastian Hesselbarth Signed-off-by: Jason Cooper --- arch/arm/boot/dts/armada-xp-mv78260.dtsi | 261 ++++++++++++++++--------------- 1 file changed, 139 insertions(+), 122 deletions(-) (limited to 'arch/arm/boot/dts/armada-xp-mv78260.dtsi') diff --git a/arch/arm/boot/dts/armada-xp-mv78260.dtsi b/arch/arm/boot/dts/armada-xp-mv78260.dtsi index 985373a04561..6dc3921df9b3 100644 --- a/arch/arm/boot/dts/armada-xp-mv78260.dtsi +++ b/arch/arm/boot/dts/armada-xp-mv78260.dtsi @@ -45,6 +45,145 @@ }; soc { + /* + * MV78260 has 3 PCIe units Gen2.0: Two units can be + * configured as x4 or quad x1 lanes. One unit is + * x4/x1. + */ + pcie-controller { + compatible = "marvell,armada-xp-pcie"; + status = "disabled"; + device_type = "pci"; + + #address-cells = <3>; + #size-cells = <2>; + + bus-range = <0x00 0xff>; + + ranges = + <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000 /* Port 0.0 registers */ + 0x82000000 0 0x42000 MBUS_ID(0xf0, 0x01) 0x42000 0 0x00002000 /* Port 2.0 registers */ + 0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000 /* Port 0.1 registers */ + 0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000 /* Port 0.2 registers */ + 0x82000000 0 0x4c000 MBUS_ID(0xf0, 0x01) 0x4c000 0 0x00002000 /* Port 0.3 registers */ + 0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000 /* Port 1.0 registers */ + 0x82000000 0 0x82000 MBUS_ID(0xf0, 0x01) 0x82000 0 0x00002000 /* Port 3.0 registers */ + 0x82000000 0x1 0 MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */ + 0x81000000 0x1 0 MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO */ + 0x82000000 0x2 0 MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 0.1 MEM */ + 0x81000000 0x2 0 MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 0.1 IO */ + 0x82000000 0x3 0 MBUS_ID(0x04, 0xb8) 0 1 0 /* Port 0.2 MEM */ + 0x81000000 0x3 0 MBUS_ID(0x04, 0xb0) 0 1 0 /* Port 0.2 IO */ + 0x82000000 0x4 0 MBUS_ID(0x04, 0x78) 0 1 0 /* Port 0.3 MEM */ + 0x81000000 0x4 0 MBUS_ID(0x04, 0x70) 0 1 0 /* Port 0.3 IO */ + 0x82000000 0x9 0 MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 1.0 MEM */ + 0x81000000 0x9 0 MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 1.0 IO */ + 0x82000000 0xa 0 MBUS_ID(0x08, 0xf8) 0 1 0 /* Port 3.0 MEM */ + 0x81000000 0xa 0 MBUS_ID(0x08, 0xf0) 0 1 0 /* Port 3.0 IO */>; + + pcie@1,0 { + device_type = "pci"; + assigned-addresses = <0x82000800 0 0x40000 0 0x2000>; + reg = <0x0800 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0 + 0x81000000 0 0 0x81000000 0x1 0 1 0>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 58>; + marvell,pcie-port = <0>; + marvell,pcie-lane = <0>; + clocks = <&gateclk 5>; + status = "disabled"; + }; + + pcie@2,0 { + device_type = "pci"; + assigned-addresses = <0x82000800 0 0x44000 0 0x2000>; + reg = <0x1000 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0 + 0x81000000 0 0 0x81000000 0x2 0 1 0>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 59>; + marvell,pcie-port = <0>; + marvell,pcie-lane = <1>; + clocks = <&gateclk 6>; + status = "disabled"; + }; + + pcie@3,0 { + device_type = "pci"; + assigned-addresses = <0x82000800 0 0x48000 0 0x2000>; + reg = <0x1800 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0 + 0x81000000 0 0 0x81000000 0x3 0 1 0>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 60>; + marvell,pcie-port = <0>; + marvell,pcie-lane = <2>; + clocks = <&gateclk 7>; + status = "disabled"; + }; + + pcie@4,0 { + device_type = "pci"; + assigned-addresses = <0x82000800 0 0x4c000 0 0x2000>; + reg = <0x2000 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0 + 0x81000000 0 0 0x81000000 0x4 0 1 0>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 61>; + marvell,pcie-port = <0>; + marvell,pcie-lane = <3>; + clocks = <&gateclk 8>; + status = "disabled"; + }; + + pcie@9,0 { + device_type = "pci"; + assigned-addresses = <0x82000800 0 0x42000 0 0x2000>; + reg = <0x4800 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges = <0x82000000 0 0 0x82000000 0x9 0 1 0 + 0x81000000 0 0 0x81000000 0x9 0 1 0>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 99>; + marvell,pcie-port = <2>; + marvell,pcie-lane = <0>; + clocks = <&gateclk 26>; + status = "disabled"; + }; + + pcie@10,0 { + device_type = "pci"; + assigned-addresses = <0x82000800 0 0x82000 0 0x2000>; + reg = <0x5000 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges = <0x82000000 0 0 0x82000000 0xa 0 1 0 + 0x81000000 0 0 0x81000000 0xa 0 1 0>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 103>; + marvell,pcie-port = <3>; + marvell,pcie-lane = <0>; + clocks = <&gateclk 27>; + status = "disabled"; + }; + }; + internal-regs { pinctrl { compatible = "marvell,mv78260-pinctrl"; @@ -97,128 +236,6 @@ clocks = <&gateclk 1>; status = "disabled"; }; - - /* - * MV78260 has 3 PCIe units Gen2.0: Two units can be - * configured as x4 or quad x1 lanes. One unit is - * x4/x1. - */ - pcie-controller { - compatible = "marvell,armada-xp-pcie"; - status = "disabled"; - device_type = "pci"; - - #address-cells = <3>; - #size-cells = <2>; - - bus-range = <0x00 0xff>; - - ranges = <0x82000000 0 0x40000 0x40000 0 0x00002000 /* Port 0.0 registers */ - 0x82000000 0 0x42000 0x42000 0 0x00002000 /* Port 2.0 registers */ - 0x82000000 0 0x44000 0x44000 0 0x00002000 /* Port 0.1 registers */ - 0x82000000 0 0x48000 0x48000 0 0x00002000 /* Port 0.2 registers */ - 0x82000000 0 0x4c000 0x4c000 0 0x00002000 /* Port 0.3 registers */ - 0x82000000 0 0x80000 0x80000 0 0x00002000 /* Port 1.0 registers */ - 0x82000000 0 0x82000 0x82000 0 0x00002000 /* Port 3.0 registers */ - 0x82000000 0 0xe0000000 0xe0000000 0 0x08000000 /* non-prefetchable memory */ - 0x81000000 0 0 0xe8000000 0 0x00100000>; /* downstream I/O */ - - pcie@1,0 { - device_type = "pci"; - assigned-addresses = <0x82000800 0 0x40000 0 0x2000>; - reg = <0x0800 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - ranges; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 58>; - marvell,pcie-port = <0>; - marvell,pcie-lane = <0>; - clocks = <&gateclk 5>; - status = "disabled"; - }; - - pcie@2,0 { - device_type = "pci"; - assigned-addresses = <0x82000800 0 0x44000 0 0x2000>; - reg = <0x1000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - ranges; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 59>; - marvell,pcie-port = <0>; - marvell,pcie-lane = <1>; - clocks = <&gateclk 6>; - status = "disabled"; - }; - - pcie@3,0 { - device_type = "pci"; - assigned-addresses = <0x82000800 0 0x48000 0 0x2000>; - reg = <0x1800 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - ranges; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 60>; - marvell,pcie-port = <0>; - marvell,pcie-lane = <2>; - clocks = <&gateclk 7>; - status = "disabled"; - }; - - pcie@4,0 { - device_type = "pci"; - assigned-addresses = <0x82000800 0 0x4c000 0 0x2000>; - reg = <0x2000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - ranges; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 61>; - marvell,pcie-port = <0>; - marvell,pcie-lane = <3>; - clocks = <&gateclk 8>; - status = "disabled"; - }; - - pcie@9,0 { - device_type = "pci"; - assigned-addresses = <0x82000800 0 0x42000 0 0x2000>; - reg = <0x4800 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - ranges; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 99>; - marvell,pcie-port = <2>; - marvell,pcie-lane = <0>; - clocks = <&gateclk 26>; - status = "disabled"; - }; - - pcie@10,0 { - device_type = "pci"; - assigned-addresses = <0x82000800 0 0x82000 0 0x2000>; - reg = <0x5000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - ranges; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 103>; - marvell,pcie-port = <3>; - marvell,pcie-lane = <0>; - clocks = <&gateclk 27>; - status = "disabled"; - }; - }; }; }; }; -- cgit v1.2.3