From 731b26a6ac17f24057c559361c6d0cb7cb79baed Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Thu, 6 Oct 2016 13:15:02 +0200 Subject: ARM: bcm2835: Add names for the Raspberry Pi GPIO lines The idea is to give useful names to GPIO lines that an implementer will be using from userspace, e.g. for maker type projects. These are user-visible using tools/gpio/lsgpio.c v2: Major rewrite by anholt: Flatten each GPIO line to a line in the file for better diffing, prefix all expansion header pins with "P" or "P5HEADER_P" and drop the mostly-unused GPIO_GEN names in favor of GPIO, fix extra '[]' on a couple of lines, fix locations of SD_CARD_DETECT, CAM_GPIO and STATUS_LED, fix HDMI_HPD polarities, rewrite A+ using unreleased schematics. v3: More changes by anholt: Drop P / P5HEADER prefixes. I had been skeptical about adding them, and was convinced to drop them by Gottfried (who probably has more experience with GPIOs in educational contexts than the rest of us). Also drop [] brackets for "is pinmuxed", which didn't seem to clarify, and were ambiguous for things like the SPI_*-labeled pins which may or may not actually be pinmuxed to SPI. v4: Rename B+'s SDA0/SCL0 to match the other boards, despite the naming on its schematic. Signed-off-by: Linus Walleij Signed-off-by: Eric Anholt --- arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts | 66 ++++++++++++++++++++++++++++++++ 1 file changed, 66 insertions(+) (limited to 'arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts') diff --git a/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts b/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts index 75e045aba7ce..4133bc2cd9be 100644 --- a/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts +++ b/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts @@ -16,6 +16,72 @@ }; &gpio { + /* + * Taken from Raspberry-Pi-Rev-2.0-Model-AB-Schematics.pdf + * RPI00022 sheet 02 + * + * Legend: + * "NC" = not connected (no rail from the SoC) + * "FOO" = GPIO line named "FOO" on the schematic + * "FOO_N" = GPIO line named "FOO" on schematic, active low + */ + gpio-line-names = "SDA0", + "SCL0", + "SDA1", + "SCL1", + "GPIO_GCLK", + "CAM_CLK", + "LAN_RUN", + "SPI_CE1_N", + "SPI_CE0_N", + "SPI_MISO", + "SPI_MOSI", + "SPI_SCLK", + "NC", /* GPIO12 */ + "NC", /* GPIO13 */ + /* Serial port */ + "TXD0", + "RXD0", + "STATUS_LED_N", + "GPIO17", + "GPIO18", + "NC", /* GPIO19 */ + "NC", /* GPIO20 */ + "CAM_GPIO", + "GPIO22", + "GPIO23", + "GPIO24", + "GPIO25", + "NC", /* GPIO26 */ + "GPIO27", + "GPIO28", + "GPIO29", + "GPIO30", + "GPIO31", + "NC", /* GPIO32 */ + "NC", /* GPIO33 */ + "NC", /* GPIO34 */ + "NC", /* GPIO35 */ + "NC", /* GPIO36 */ + "NC", /* GPIO37 */ + "NC", /* GPIO38 */ + "NC", /* GPIO39 */ + "PWM0_OUT", + "NC", /* GPIO41 */ + "NC", /* GPIO42 */ + "NC", /* GPIO43 */ + "NC", /* GPIO44 */ + "PWM1_OUT", + "HDMI_HPD_P", + "SD_CARD_DET", + /* Used by SD Card */ + "SD_CLK_R", + "SD_CMD_R", + "SD_DATA0_R", + "SD_DATA1_R", + "SD_DATA2_R", + "SD_DATA3_R"; + pinctrl-0 = <&gpioout &alt0 &i2s_alt2>; /* I2S interface */ -- cgit v1.2.3