From 1f5e6c639e25de9f059ea0e0181a5baeb3b3f4bf Mon Sep 17 00:00:00 2001 From: Sebastian Hesselbarth Date: Wed, 15 Aug 2012 19:07:35 +0200 Subject: ARM: dove: SolidRun CuBox DT This patch adds basic support for the SolidRun CuBox to DT based mach-dove. There are still some issues related to ongoing orion/mvebu development, e.g. gpio-led will not work as there is no DT pinctrl for dove yet and we don't have board specific setup code. Nevertheless, the DT description is already introduced here. Signed-off-by: Sebastian Hesselbarth Signed-off-by: Jason Cooper --- arch/arm/boot/dts/dove-cubox.dts | 42 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 42 insertions(+) create mode 100644 arch/arm/boot/dts/dove-cubox.dts (limited to 'arch/arm/boot/dts/dove-cubox.dts') diff --git a/arch/arm/boot/dts/dove-cubox.dts b/arch/arm/boot/dts/dove-cubox.dts new file mode 100644 index 000000000000..0adbd5a38095 --- /dev/null +++ b/arch/arm/boot/dts/dove-cubox.dts @@ -0,0 +1,42 @@ +/dts-v1/; + +/include/ "dove.dtsi" + +/ { + model = "SolidRun CuBox"; + compatible = "solidrun,cubox", "marvell,dove"; + + memory { + device_type = "memory"; + reg = <0x00000000 0x40000000>; + }; + + chosen { + bootargs = "console=ttyS0,115200n8 earlyprintk"; + }; + + leds { + compatible = "gpio-leds"; + power { + label = "Power"; + gpios = <&gpio0 18 1>; + linux,default-trigger = "default-on"; + }; + }; +}; + +&uart0 { status = "okay"; }; +&sdio0 { status = "okay"; }; +&sata0 { status = "okay"; }; +&i2c0 { status = "okay"; }; + +&spi0 { + status = "okay"; + + /* spi0.0: 4M Flash Winbond W25Q32BV */ + spi-flash@0 { + compatible = "st,w25q32"; + spi-max-frequency = <20000000>; + reg = <0>; + }; +}; -- cgit v1.2.3