From bc0b8b7085f534d65618f7103e87440fef0e27cf Mon Sep 17 00:00:00 2001 From: Matthias Brugger Date: Wed, 12 Dec 2012 16:33:42 +0100 Subject: ARM: dts: omap3-igep: Add uart1 and uart2 to igep boards This is a follow-up to Javier Martinez effort adding initial device tree support to IGEP technology devices [1]. It adds uart1 and uart2 bindings to the generic dtsi for the IGEP boards. [1] http://www.spinics.net/lists/linux-omap/msg83409.html Signed-off-by: Matthias Brugger Signed-off-by: Benoit Cousson --- arch/arm/boot/dts/omap3-igep.dtsi | 24 ++++++++++++++++++++++++ 1 file changed, 24 insertions(+) (limited to 'arch/arm/boot/dts/omap3-igep.dtsi') diff --git a/arch/arm/boot/dts/omap3-igep.dtsi b/arch/arm/boot/dts/omap3-igep.dtsi index 100eb4101170..dd01c46d9082 100644 --- a/arch/arm/boot/dts/omap3-igep.dtsi +++ b/arch/arm/boot/dts/omap3-igep.dtsi @@ -27,6 +27,20 @@ }; &omap3_pmx_core { + uart1_pins: pinmux_uart1_pins { + pinctrl-single,pins = < + 0x152 0x100 /* uart1_rx.uart1_rx INPUT | MODE0 */ + 0x14c 0 /* uart1_tx.uart1_tx OUTPUT | MODE0 */ + >; + }; + + uart2_pins: pinmux_uart2_pins { + pinctrl-single,pins = < + 0x14a 0x100 /* uart2_rx.uart2_rx INPUT | MODE0 */ + 0x148 0 /* uart2_tx.uart2_tx OUTPUT | MODE0 */ + >; + }; + uart3_pins: pinmux_uart3_pins { pinctrl-single,pins = < 0x16e 0x100 /* uart3_rx.uart3_rx INPUT | MODE0 */ @@ -88,6 +102,16 @@ status = "disabled"; }; +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins>; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&uart2_pins>; +}; + &uart3 { pinctrl-names = "default"; pinctrl-0 = <&uart3_pins>; -- cgit v1.2.3