From b9526a81ba92d648cb542e6053a25293b113f991 Mon Sep 17 00:00:00 2001 From: Bjorn Andersson Date: Tue, 20 Oct 2015 21:57:48 -0700 Subject: ARM: dts: qcom: msm8974-honami: Add uSD slot nodes Add and enable the sdhci2 slot, the pinctrl configuration and card detect. Signed-off-by: Bjorn Andersson Signed-off-by: Andy Gross --- .../boot/dts/qcom-msm8974-sony-xperia-honami.dts | 37 ++++++++++++++++++++++ 1 file changed, 37 insertions(+) (limited to 'arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts') diff --git a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts index 5f68eb270774..e7e796888a21 100644 --- a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts +++ b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts @@ -290,6 +290,20 @@ pinctrl-0 = <&sdhc1_pin_a>; }; + sdhci@f98a4900 { + status = "ok"; + + bus-width = <4>; + + vmmc-supply = <&pm8941_l21>; + vqmmc-supply = <&pm8941_l13>; + + cd-gpios = <&msmgpio 62 GPIO_ACTIVE_LOW>; + + pinctrl-names = "default"; + pinctrl-0 = <&sdhc2_pin_a>, <&sdhc2_cd_pin_a>; + }; + serial@f991e000 { status = "ok"; @@ -329,6 +343,29 @@ bias-pull-up; }; }; + + sdhc2_cd_pin_a: sdhc2-cd-pin-active { + pins = "gpio62"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + sdhc2_pin_a: sdhc2-pin-active { + clk { + pins = "sdc2_clk"; + drive-strength = <10>; + bias-disable; + }; + + cmd-data { + pins = "sdc2_cmd", "sdc2_data"; + drive-strength = <6>; + bias-pull-up; + }; + }; + }; }; -- cgit v1.2.3